[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfef3000 - 00000000bff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfef0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00BFF00000 mask FFFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfef0000 (usable) [ 0.000000] modified: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS) [ 0.000000] modified: 00000000bfef3000 - 00000000bff00000 (ACPI data) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 7f711000 - 7ffff970 [ 0.000000] Allocated new RAMDISK: 008de000 - 011cc970 [ 0.000000] Move RAMDISK from 000000007f711000 - 000000007ffff96f to 008de000 - 011cc96f [ 0.000000] ACPI: RSDP 000f76d0 00014 (v00 HP-CPC) [ 0.000000] ACPI: RSDT bfef3040 00034 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP bfef30c0 00074 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT bfef3180 06F4F (v01 HP-CPC AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS bfef0000 00040 [ 0.000000] ACPI: SSDT bfefa200 00188 (v01 HP-CPC POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: MCFG bfefa400 0003C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC bfefa140 0007C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2182MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd1cc] BRK ==> [00008da000 - 00008dd1cc] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008de000 - 00011cc970] NEW RAMDISK ==> [00008de000 - 00011cc970] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f5b40] f5b40 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bfef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfef0 [ 0.000000] On node 0 totalpages: 786047 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c11ce200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4366 pages used for memmap [ 0.000000] HighMem zone: 554468 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:30100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36024 r0 d21320 u2097152 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779905 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15722880 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bfef0) [ 0.000000] Memory: 3084948k/3144640k available (4673k kernel code, 58132k reserved, 2122k data, 656k init, 2235336k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2004.106 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4008.21 BogoMIPS (lpj=8016424) [ 0.008024] Security Framework initialized [ 0.008047] AppArmor: AppArmor initialized [ 0.008054] Mount-cache hash table entries: 512 [ 0.012040] Initializing cgroup subsys ns [ 0.012044] Initializing cgroup subsys cpuacct [ 0.012048] Initializing cgroup subsys memory [ 0.012055] Initializing cgroup subsys devices [ 0.012058] Initializing cgroup subsys freezer [ 0.012060] Initializing cgroup subsys net_cls [ 0.012079] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012082] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012085] CPU: Physical Processor ID: 0 [ 0.012086] CPU: Processor Core ID: 0 [ 0.012090] mce: CPU supports 5 MCE banks [ 0.012107] Performance Events: AMD PMU driver. [ 0.012114] ... version: 0 [ 0.012116] ... bit width: 48 [ 0.012118] ... generic registers: 4 [ 0.012120] ... value mask: 0000ffffffffffff [ 0.012122] ... max period: 00007fffffffffff [ 0.012124] ... fixed-purpose events: 0 [ 0.012126] ... event mask: 000000000000000f [ 0.012131] Checking 'hlt' instruction... OK. [ 0.030285] ACPI: Core revision 20090903 [ 0.043127] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.043133] ftrace: allocating 21771 entries in 43 pages [ 0.044096] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044623] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.052001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.052001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.052001] ..... (found apic 0 pin 0) ... [ 0.060001] ....... failed. [ 0.060001] ...trying to set up timer as Virtual Wire IRQ... [ 0.060001] ..... failed. [ 0.060001] ...trying to set up timer as ExtINT IRQ... [ 0.100091] ..... works. [ 0.100093] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 [ 0.104001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.012000] Initializing CPU#1 [ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012000] CPU: Physical Processor ID: 0 [ 0.012000] CPU: Processor Core ID: 1 [ 0.188080] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 [ 0.188108] Brought up 2 CPUs [ 0.188111] Total of 2 processors activated (8016.83 BogoMIPS). [ 0.188336] CPU0 attaching sched-domain: [ 0.188340] domain 0: span 0-1 level MC [ 0.188343] groups: 0 1 [ 0.188348] CPU1 attaching sched-domain: [ 0.188351] domain 0: span 0-1 level MC [ 0.188354] groups: 1 0 [ 0.188438] devtmpfs: initialized [ 0.188438] regulator: core version 0.5 [ 0.188438] Time: 22:35:49 Date: 05/09/10 [ 0.188438] NET: Registered protocol family 16 [ 0.188438] Trying to unpack rootfs image as initramfs... [ 0.188438] EISA bus registered [ 0.188438] ACPI: bus type pci registered [ 0.188438] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 [ 0.188438] PCI: MCFG area at f0000000 reserved in E820 [ 0.188438] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.188438] PCI: Using MMCONFIG for extended config space [ 0.188438] PCI: Using configuration type 1 for base access [ 0.192114] bio: create slab at 0 [ 0.193324] ACPI: EC: Look up EC in DSDT [ 0.203312] ACPI: Interpreter enabled [ 0.203319] ACPI: (supports S0 S1 S3 S4 S5) [ 0.203350] ACPI: Using IOAPIC for interrupt routing [ 0.214015] ACPI: No dock devices found. [ 0.215049] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.215322] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.215327] pci 0000:00:02.0: PME# disabled [ 0.215366] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.215370] pci 0000:00:04.0: PME# disabled [ 0.215565] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.215612] pci 0000:00:0a.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.215618] pci 0000:00:0a.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.215643] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.215649] pci 0000:00:0a.1: PME# disabled [ 0.215718] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.215748] pci 0000:00:0b.0: supports D1 D2 [ 0.215751] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.215755] pci 0000:00:0b.0: PME# disabled [ 0.215782] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.215814] pci 0000:00:0b.1: supports D1 D2 [ 0.215817] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.215821] pci 0000:00:0b.1: PME# disabled [ 0.215860] pci 0000:00:0d.0: reg 20 io port: [0xfd00-0xfd0f] [ 0.215904] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] [ 0.215909] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] [ 0.215915] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] [ 0.215920] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] [ 0.215926] pci 0000:00:0e.0: reg 20 io port: [0xf800-0xf80f] [ 0.215932] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.215980] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7] [ 0.215986] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3] [ 0.215991] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967] [ 0.216006] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63] [ 0.216012] pci 0000:00:0f.0: reg 20 io port: [0xf300-0xf30f] [ 0.216017] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.216111] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff] [ 0.216147] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.216151] pci 0000:00:10.1: PME# disabled [ 0.216186] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.216192] pci 0000:00:14.0: reg 14 io port: [0xf200-0xf207] [ 0.216217] pci 0000:00:14.0: supports D1 D2 [ 0.216220] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216224] pci 0000:00:14.0: PME# disabled [ 0.216345] pci 0000:00:02.0: bridge io port: [0xe000-0xefff] [ 0.216349] pci 0000:00:02.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.216354] pci 0000:00:02.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.216379] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.216387] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.216395] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.216401] pci 0000:02:00.0: reg 24 io port: [0xcf00-0xcf7f] [ 0.216406] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbfe0000-0xfbffffff] [ 0.216464] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff] [ 0.216468] pci 0000:00:04.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.216472] pci 0000:00:04.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.216507] pci 0000:03:05.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff] [ 0.216545] pci 0000:03:05.0: supports D1 D2 [ 0.216547] pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot [ 0.216552] pci 0000:03:05.0: PME# disabled [ 0.216583] pci 0000:03:09.0: reg 10 32bit mmio: [0xfdee0000-0xfdeeffff] [ 0.216590] pci 0000:03:09.0: reg 14 io port: [0xdf00-0xdf07] [ 0.216623] pci 0000:03:09.0: PME# supported from D3hot D3cold [ 0.216628] pci 0000:03:09.0: PME# disabled [ 0.216657] pci 0000:00:10.0: transparent bridge [ 0.216660] pci 0000:00:10.0: bridge io port: [0xd000-0xdfff] [ 0.216665] pci 0000:00:10.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.216669] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.216679] pci_bus 0000:00: on NUMA node 0 [ 0.216685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.216963] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.327913] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.328164] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.328402] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.328640] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.328880] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15) [ 0.329117] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.329355] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.329594] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.329832] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330070] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330310] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) [ 0.330548] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330788] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15) [ 0.331025] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331266] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331505] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331743] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331981] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.332233] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 0.332472] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 0.332754] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.333032] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.333309] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.333586] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.333864] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 0.334140] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.334418] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.334696] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.334973] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.335252] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.335531] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.335810] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 0.336099] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.336379] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.336658] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.336937] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.337216] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.337495] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.337779] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.338058] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.338337] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.338493] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.338497] vgaarb: loaded [ 0.338621] SCSI subsystem initialized [ 0.338718] libata version 3.00 loaded. [ 0.338788] usbcore: registered new interface driver usbfs [ 0.338801] usbcore: registered new interface driver hub [ 0.338826] usbcore: registered new device driver usb [ 0.338967] ACPI: WMI: Mapper loaded [ 0.338969] PCI: Using ACPI for IRQ routing [ 0.339143] NetLabel: Initializing [ 0.339145] NetLabel: domain hash size = 128 [ 0.339147] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.339162] NetLabel: unlabeled traffic allowed by default [ 0.341059] AppArmor: AppArmor Filesystem Enabled [ 0.341079] pnp: PnP ACPI init [ 0.341095] ACPI: bus type pnp registered [ 0.346461] pnp: PnP ACPI: found 10 devices [ 0.346463] ACPI: ACPI bus type pnp unregistered [ 0.346467] PnPBIOS: Disabled by ACPI PNP [ 0.346479] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.346482] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.346486] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.346489] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.346492] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.346495] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.346498] system 00:01: ioport range 0x2000-0x207f has been reserved [ 0.346501] system 00:01: ioport range 0x2080-0x20ff has been reserved [ 0.346507] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.346511] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.346519] system 00:08: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.346524] system 00:09: iomem range 0xf0000-0xf3fff could not be reserved [ 0.346528] system 00:09: iomem range 0xf4000-0xf7fff could not be reserved [ 0.346531] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 0.346535] system 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 0.346538] system 00:09: iomem range 0xbfef0000-0xbfefffff could not be reserved [ 0.346542] system 00:09: iomem range 0xffff0000-0xffffffff has been reserved [ 0.346545] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.346548] system 00:09: iomem range 0x100000-0xbfeeffff could not be reserved [ 0.346552] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.346556] system 00:09: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.346559] system 00:09: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.346563] system 00:09: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.346566] system 00:09: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.346569] system 00:09: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.381256] Switching to clocksource acpi_pm [ 2.402061] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 2.402061] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 2.402061] pci 0000:00:02.0: MEM window: 0xfdb00000-0xfdbfffff [ 2.402061] pci 0000:00:02.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff [ 2.402061] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 2.402061] pci 0000:00:04.0: IO window: 0xc000-0xcfff [ 2.402061] pci 0000:00:04.0: MEM window: 0xf8000000-0xfbffffff [ 2.402061] pci 0000:00:04.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 2.402061] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 2.402061] pci 0000:00:10.0: IO window: 0xd000-0xdfff [ 2.402061] pci 0000:00:10.0: MEM window: 0xfde00000-0xfdefffff [ 2.402061] pci 0000:00:10.0: PREFETCH window: 0xfdd00000-0xfddfffff [ 2.402061] pci 0000:00:02.0: setting latency timer to 64 [ 2.402061] pci 0000:00:04.0: setting latency timer to 64 [ 2.402061] pci 0000:00:10.0: setting latency timer to 64 [ 2.402061] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 2.402061] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 2.402061] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 2.402061] pci_bus 0000:01: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 2.402061] pci_bus 0000:01: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 2.402061] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 2.402061] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff] [ 2.402061] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff] [ 2.402061] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 2.402061] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff] [ 2.402061] pci_bus 0000:03: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 2.402061] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 2.402061] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 2.402061] NET: Registered protocol family 2 [ 2.402061] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 2.402061] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.402061] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 2.402372] TCP: Hash tables configured (established 131072 bind 65536) [ 2.402376] TCP reno registered [ 2.402505] NET: Registered protocol family 1 [ 2.402574] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.402600] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.436077] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 2.436135] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 2.436198] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 2.436263] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 2.436284] pci 0000:02:00.0: Boot video device [ 2.436528] cpufreq-nforce2: No nForce2 chipset. [ 2.436559] Scanning for low memory corruption every 60 seconds [ 2.436679] audit: initializing netlink socket (disabled) [ 2.436695] type=2000 audit(1273444551.436:1): initialized [ 2.446980] highmem bounce pool size: 64 pages [ 2.446987] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.448533] VFS: Disk quotas dquot_6.5.2 [ 2.448595] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.449191] fuse init (API version 7.13) [ 2.449283] msgmni has been set to 1661 [ 2.449547] alg: No test for stdrng (krng) [ 2.449613] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.449618] io scheduler noop registered [ 2.449621] io scheduler anticipatory registered [ 2.449623] io scheduler deadline registered [ 2.449666] io scheduler cfq registered (default) [ 2.449841] alloc irq_desc for 24 on node -1 [ 2.449844] alloc kstat_irqs on node -1 [ 2.449856] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 2.449863] pcieport 0000:00:02.0: setting latency timer to 64 [ 2.449938] alloc irq_desc for 25 on node -1 [ 2.449941] alloc kstat_irqs on node -1 [ 2.449946] pcieport 0000:00:04.0: irq 25 for MSI/MSI-X [ 2.449951] pcieport 0000:00:04.0: setting latency timer to 64 [ 2.450011] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.450038] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.450178] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.450184] ACPI: Power Button [PWRB] [ 2.450255] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.450259] ACPI: Power Button [PWRF] [ 2.450322] fan PNP0C0B:00: registered as cooling_device0 [ 2.450327] ACPI: Fan [FAN] (on) [ 2.450928] processor LNXCPU:00: registered as cooling_device1 [ 2.450962] processor LNXCPU:01: registered as cooling_device2 [ 2.458350] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.458361] ACPI: Thermal Zone [THRM] (40 C) [ 2.459957] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.461313] brd: module loaded [ 2.461816] loop: module loaded [ 2.461909] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.462109] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 2.462604] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 2.462610] alloc irq_desc for 23 on node -1 [ 2.462613] alloc kstat_irqs on node -1 [ 2.462626] pata_acpi 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 2.462644] pata_acpi 0000:00:0e.0: setting latency timer to 64 [ 2.462653] pata_acpi 0000:00:0e.0: PCI INT A disabled [ 2.463072] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 2.463075] alloc irq_desc for 22 on node -1 [ 2.463077] alloc kstat_irqs on node -1 [ 2.463086] pata_acpi 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 2.463104] pata_acpi 0000:00:0f.0: setting latency timer to 64 [ 2.463112] pata_acpi 0000:00:0f.0: PCI INT A disabled [ 2.463440] Fixed MDIO Bus: probed [ 2.463475] PPP generic driver version 2.4.2 [ 2.463522] tun: Universal TUN/TAP device driver, 1.6 [ 2.463524] tun: (C) 1999-2004 Max Krasnyansky [ 2.463616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.464086] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 2.464089] alloc irq_desc for 21 on node -1 [ 2.464092] alloc kstat_irqs on node -1 [ 2.464100] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 2.464123] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 2.464126] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 2.464178] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 2.464211] ehci_hcd 0000:00:0b.1: debug port 1 [ 2.464220] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 2.464248] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000 [ 2.464324] isapnp: Scanning for PnP cards... [ 2.472172] Freeing initrd memory: 9146k freed [ 2.513211] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 2.513308] usb usb1: configuration #1 chosen from 1 choice [ 2.513339] hub 1-0:1.0: USB hub found [ 2.513348] hub 1-0:1.0: 8 ports detected [ 2.513413] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.513874] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 2.513877] alloc irq_desc for 20 on node -1 [ 2.513879] alloc kstat_irqs on node -1 [ 2.513888] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 2.513897] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 2.513900] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 2.513934] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 2.513961] ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000 [ 2.570083] usb usb2: configuration #1 chosen from 1 choice [ 2.570109] hub 2-0:1.0: USB hub found [ 2.570118] hub 2-0:1.0: 8 ports detected [ 2.570184] uhci_hcd: USB Universal Host Controller Interface driver [ 2.570261] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.570263] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.570972] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.571077] mice: PS/2 mouse device common for all mice [ 2.571201] rtc_cmos 00:04: RTC can wake from S4 [ 2.571243] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.571276] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 2.571381] device-mapper: uevent: version 1.0.3 [ 2.571497] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.571575] device-mapper: multipath: version 1.1.0 loaded [ 2.571578] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.571698] EISA: Probing bus 0 at eisa.0 [ 2.571707] Cannot allocate resource for EISA slot 2 [ 2.571712] Cannot allocate resource for EISA slot 4 [ 2.571725] EISA: Detected 0 cards. [ 2.571816] cpuidle: using governor ladder [ 2.571818] cpuidle: using governor menu [ 2.572328] TCP cubic registered [ 2.572492] NET: Registered protocol family 10 [ 2.572992] lo: Disabled Privacy Extensions [ 2.573352] NET: Registered protocol family 17 [ 2.573387] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [ 2.573436] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 [ 2.573439] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa [ 2.573442] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 2.573483] Using IPI No-Shortcut mode [ 2.573564] PM: Resume from disk failed. [ 2.573577] registered taskstats version 1 [ 2.573908] Magic number: 10:34:603 [ 2.573965] pci_link PNP0C0F:0f: hash matches [ 2.574021] rtc_cmos 00:04: setting system clock to 2010-05-09 22:35:52 UTC (1273444552) [ 2.574025] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.574027] EDD information not available. [ 2.599888] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.818024] isapnp: No Plug & Play device found [ 2.818048] Freeing unused kernel memory: 656k freed [ 2.818524] Write protecting the kernel text: 4676k [ 2.818564] Write protecting the kernel read-only data: 1840k [ 2.843348] udev: starting version 151 [ 2.903080] pata_amd 0000:00:0d.0: version 0.4.1 [ 2.903132] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 2.913477] scsi0 : pata_amd [ 2.940255] scsi1 : pata_amd [ 2.941050] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14 [ 2.941055] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15 [ 2.941218] sata_nv 0000:00:0e.0: version 3.5 [ 2.941230] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 2.941234] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 2.941291] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 2.941485] Linux agpgart interface v0.103 [ 2.945611] scsi2 : sata_nv [ 2.951677] scsi3 : sata_nv [ 2.951966] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 23 [ 2.951970] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 23 [ 2.952079] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2.952499] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 2.952505] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 2.952511] forcedeth 0000:00:14.0: setting latency timer to 64 [ 2.952567] nv_probe: set workaround bit for reversed mac addr [ 2.996062] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 3.104465] ata1.00: ATAPI: HL-DT-STDVDRRW GSA-H20L, S742, max UDMA/33 [ 3.104492] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13) [ 3.120412] ata1.00: configured for UDMA/33 [ 3.123448] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-H20L S742 PQ: 0 ANSI: 5 [ 3.128646] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.128650] Uniform CD-ROM driver Revision: 3.20 [ 3.128766] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 3.128832] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 3.130468] usb 1-5: configuration #1 chosen from 1 choice [ 3.138811] Initializing USB Mass Storage driver... [ 3.138956] scsi4 : SCSI emulation for USB Mass Storage devices [ 3.139058] usb-storage: device found at 4 [ 3.139061] usb-storage: waiting for device to settle before scanning [ 3.139068] usbcore: registered new interface driver usb-storage [ 3.139165] USB Mass Storage support registered. [ 3.240033] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 3.374617] usb 1-6: configuration #1 chosen from 1 choice [ 3.374976] scsi5 : SCSI emulation for USB Mass Storage devices [ 3.375133] usb-storage: device found at 5 [ 3.375135] usb-storage: waiting for device to settle before scanning [ 3.436054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3.444592] ata3.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133 [ 3.444596] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 3.460625] ata3.00: configured for UDMA/133 [ 3.460737] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5 [ 3.460916] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.461027] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.461073] sd 2:0:0:0: [sda] Write Protect is off [ 3.461076] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.461525] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.461659] sda: [ 3.473097] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 13, addr 00:18:f3:6e:fd:82 [ 3.473101] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 3.473157] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 3.473161] sata_nv 0000:00:0f.0: Using SWNCQ mode [ 3.473215] sata_nv 0000:00:0f.0: setting latency timer to 64 [ 3.473385] scsi6 : sata_nv [ 3.473460] scsi7 : sata_nv [ 3.473693] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 22 [ 3.473698] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 22 [ 3.478357] sda1 sda2 sda3 [ 3.478762] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.484045] usb 1-7: new high speed USB device using ehci_hcd and address 6 [ 3.622391] usb 1-7: configuration #1 chosen from 1 choice [ 3.622716] scsi8 : SCSI emulation for USB Mass Storage devices [ 3.622895] usb-storage: device found at 6 [ 3.622897] usb-storage: waiting for device to settle before scanning [ 3.782502] ata4: SATA link down (SStatus 0 SControl 310) [ 3.794488] ata5: SATA link down (SStatus 0 SControl 310) [ 4.036021] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 4.114484] ata6: SATA link down (SStatus 0 SControl 310) [ 4.118269] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 4.118276] alloc irq_desc for 19 on node -1 [ 4.118278] alloc kstat_irqs on node -1 [ 4.118291] ohci1394 0000:03:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 4.141938] [drm] Initialized drm 1.1.0 20060810 [ 4.177526] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [ 4.185469] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 4.185474] alloc irq_desc for 16 on node -1 [ 4.185476] alloc kstat_irqs on node -1 [ 4.185487] nouveau 0000:02:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 4.185492] nouveau 0000:02:00.0: setting latency timer to 64 [ 4.188102] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x450300a2) [ 4.188806] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN [ 4.246774] [drm] nouveau 0000:02:00.0: ... appears to be valid [ 4.246778] [drm] nouveau 0000:02:00.0: BIT BIOS found [ 4.246781] [drm] nouveau 0000:02:00.0: Bios version 60.80.20.00 [ 4.246786] [drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported [ 4.246789] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0 [ 4.246793] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 14 2 [ 4.246797] [drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 4.246800] [drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 4.246803] [drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 4.246807] [drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 4.246810] [drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 4.246813] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 04000320 00000028 [ 4.246817] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000322 00000030 [ 4.246819] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 02011310 00000028 [ 4.246822] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02011312 00000030 [ 4.246825] [drm] nouveau 0000:02:00.0: Raw DCB entry 4: 010223f1 00c1c020 [ 4.246834] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xC524 [ 4.249139] usb 2-1: configuration #1 chosen from 1 choice [ 4.280206] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xC72F [ 4.316025] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xD8EB [ 4.316033] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xD9DA [ 4.324085] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xDB91 [ 4.324088] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xDBF6 [ 4.348022] [drm] nouveau 0000:02:00.0: 0xDBF6: Condition still not met after 20ms, skipping following opcodes [ 4.348046] [drm] nouveau 0000:02:00.0: 0xB728: parsing output script 0 [ 4.348050] [drm] nouveau 0000:02:00.0: 0xB728: parsing output script 0 [ 4.348053] [drm] nouveau 0000:02:00.0: 0xAD98: parsing output script 0 [ 4.465003] [TTM] Zone kernel: Available graphics memory: 430262 kiB. [ 4.465006] [TTM] Zone highmem: Available graphics memory: 1547930 kiB. [ 4.465016] [drm] nouveau 0000:02:00.0: 640 MiB VRAM [ 4.477778] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture) [ 4.478242] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1 [ 4.481174] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 4.481570] [drm] nouveau 0000:02:00.0: Detected a DAC output [ 4.481573] [drm] nouveau 0000:02:00.0: Detected a TMDS output [ 4.481577] [drm] nouveau 0000:02:00.0: Detected a DAC output [ 4.481580] [drm] nouveau 0000:02:00.0: Detected a TMDS output [ 4.481583] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown [ 4.481586] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [ 4.481644] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [ 4.629025] usb 2-4: new low speed USB device using ohci_hcd and address 3 [ 4.655298] [drm] nouveau 0000:02:00.0: allocated 1440x900 fb: 0x40250000, bo f69e2e00 [ 4.655359] fb0: nouveaufb frame buffer device [ 4.655361] registered panic notifier [ 4.655366] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0 [ 4.657356] vga16fb: initializing [ 4.657363] vga16fb: mapped to 0xc00a0000 [ 4.657368] vga16fb: not registering due to another framebuffer present [ 4.665328] [drm] nouveau 0000:02:00.0: 0xB72C: parsing output script 1 [ 4.665453] [drm] nouveau 0000:02:00.0: 0x8657: parsing clock script 0 [ 4.666887] Console: switching to colour frame buffer device 180x56 [ 4.839152] usb 2-4: configuration #1 chosen from 1 choice [ 4.856901] usbcore: registered new interface driver hiddev [ 4.862347] input: Dynex 5-Button Wired Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/input/input4 [ 4.862460] generic-usb 0003:0461:4D42.0001: input,hidraw0: USB HID v1.11 Mouse [Dynex 5-Button Wired Optical Mouse] on usb-0000:00:0b.0-4/input0 [ 4.862493] usbcore: registered new interface driver usbhid [ 4.862497] usbhid: v2.6:USB HID core driver [ 4.973834] xor: automatically using best checksumming function: pIII_sse [ 4.993014] pIII_sse : 6015.000 MB/sec [ 4.993017] xor: using function: pIII_sse (6015.000 MB/sec) [ 4.995951] device-mapper: dm-raid45: initialized v0.2594b [ 5.144048] usb 2-8: new full speed USB device using ohci_hcd and address 4 [ 5.360172] usb 2-8: configuration #1 chosen from 1 choice [ 5.363202] scsi9 : SCSI emulation for USB Mass Storage devices [ 5.363321] usb-storage: device found at 4 [ 5.363324] usb-storage: waiting for device to settle before scanning [ 5.456429] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0018e00000000001] [ 8.136234] usb-storage: device scan complete [ 8.138564] scsi 4:0:0:0: Direct-Access Memorex Travel Drive CL PMAP PQ: 0 ANSI: 0 CCS [ 8.139249] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 8.140683] sd 4:0:0:0: [sdb] 3913728 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 8.141418] sd 4:0:0:0: [sdb] Write Protect is off [ 8.141421] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 8.141424] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 8.145421] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 8.145424] sdb: sdb1 [ 8.148424] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 8.148429] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 8.372219] usb-storage: device scan complete [ 8.374561] scsi 5:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2 [ 8.375183] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 8.377968] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 8.620237] usb-storage: device scan complete [ 8.622562] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 CCS [ 8.623181] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 8.624183] sd 8:0:0:0: [sdd] 3970048 512-byte logical blocks: (2.03 GB/1.89 GiB) [ 8.625419] sd 8:0:0:0: [sdd] Write Protect is off [ 8.625423] sd 8:0:0:0: [sdd] Mode Sense: 4b 00 00 08 [ 8.625426] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 8.628420] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 8.628423] sdd: sdd1 [ 8.631422] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 8.631428] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 9.238440] aufs 2-standalone.tree-20091207 [ 9.255623] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 10.362094] usb-storage: device scan complete [ 10.369066] scsi 9:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 10.376239] scsi 9:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 10.383082] scsi 9:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 10.390086] scsi 9:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 10.390518] sd 9:0:0:0: Attached scsi generic sg5 type 0 [ 10.390653] sd 9:0:0:1: Attached scsi generic sg6 type 0 [ 10.390780] sd 9:0:0:2: Attached scsi generic sg7 type 0 [ 10.390900] sd 9:0:0:3: Attached scsi generic sg8 type 0 [ 10.522064] sd 9:0:0:0: [sde] Attached SCSI removable disk [ 10.533058] sd 9:0:0:3: [sdh] Attached SCSI removable disk [ 10.555069] sd 9:0:0:1: [sdf] Attached SCSI removable disk [ 10.566060] sd 9:0:0:2: [sdg] Attached SCSI removable disk [ 12.208517] kjournald starting. Commit interval 5 seconds [ 12.209584] EXT3 FS on loop1, internal journal [ 12.209591] EXT3-fs: mounted filesystem with ordered data mode. [ 12.226483] aufs test_add:243:exe[1017]: uid/gid/perm //filesystem.squashfs 0/0/0755, 999/999/0755 [ 37.834827] udev: starting version 151 [ 38.088961] ACPI: resource nForce2_smbus [0x4c00-0x4c3f] conflicts with ACPI region SM00 [0x4c00-0x4c05] [ 38.088965] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 38.088969] nForce2_smbus 0000:00:0a.1: Error probing SMB1. [ 38.089017] i2c i2c-3: nForce2 SMBus adapter at 0x4c40 [ 38.977609] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 38.977618] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 38.977623] hda_intel: Disable MSI for Nvidia chipset [ 38.977661] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 39.789046] hda_codec: ALC883: BIOS auto-probing. [ 40.048301] lp: driver loaded but no devices found [ 40.090176] ppdev: user-space parallel port driver [ 40.145190] [drm] nouveau 0000:02:00.0: Allocating FIFO number 2 [ 40.148124] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 40.228654] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input5 [ 48.721021] eth0: no IPv6 routers present [ 84.685056] [drm] nouveau 0000:02:00.0: nouveau_channel_free: freeing fifo 2 [ 86.092620] [drm] nouveau 0000:02:00.0: Allocating FIFO number 2 [ 86.095510] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 102.688038] Clocksource tsc unstable (delta = -249820341 ns)