Closing laptop lid switches twinview metamode

Bug #1102664 reported by Matthew Spraggs
8
This bug affects 1 person
Affects Status Importance Assigned to Milestone
nvidia-graphics-drivers (Ubuntu)
New
Undecided
Unassigned

Bug Description

This is more an issue with the experimental graphics driver (I have 304.48-0ubuntu0.1 installed). When I close the lid of my laptop whilst using a second screen via TwinView, closing the lid of my laptop does not result in my laptop suspending. Instead, the laptop screen turns off and all display is transferred to the attached monitor. I'm pretty sure this is due to me upgrading to the experimental driver (for Steam ^^), as I didn't have the issue till recently and it is a graphics issue of sorts.

I'm using precise with kernel 3.2.0-36-generic. My lsb_release -rd:

Description: Ubuntu 12.04.1 LTS
Release: 12.04

My card is a Nvidia GeForce 540m.

Here's the relevant section of output from my syslog:

Jan 21 13:33:27 matthew-PBL21 NetworkManager[1003]: <info> sleep requested (sleeping: no enabled: yes)
Jan 21 13:33:27 matthew-PBL21 NetworkManager[1003]: <info> sleeping or disabling...
Jan 21 13:33:27 matthew-PBL21 NetworkManager[1003]: <info> (eth0): now unmanaged
Jan 21 13:33:27 matthew-PBL21 NetworkManager[1003]: <info> (eth0): device state change: unavailable -> unmanaged (reason 'sleeping') [20 10 37]
Jan 21 13:33:27 matthew-PBL21 NetworkManager[1003]: <info> (eth0): cleaning up...
Jan 21 13:33:27 matthew-PBL21 NetworkManager[1003]: <info> (eth0): taking down device.
Jan 21 13:33:27 matthew-PBL21 NetworkManager[1003]: <info> (eth1): now unmanaged
Jan 21 13:33:27 matthew-PBL21 NetworkManager[1003]: <info> (eth1): device state change: activated -> unmanaged (reason 'sleeping') [100 10 37]
Jan 21 13:33:28 matthew-PBL21 NetworkManager[1003]: <info> (eth1): deactivating device (reason 'sleeping') [37]
Jan 21 13:33:28 matthew-PBL21 NetworkManager[1003]: <info> (eth1): canceled DHCP transaction, DHCP client pid 2856
Jan 21 13:33:28 matthew-PBL21 dnsmasq[2860]: exiting on receipt of SIGTERM
Jan 21 13:33:28 matthew-PBL21 wpa_supplicant[1218]: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=0
Jan 21 13:33:28 matthew-PBL21 NetworkManager[1003]: <info> DNS: starting dnsmasq...
Jan 21 13:33:28 matthew-PBL21 NetworkManager[1003]: <info> (eth1): writing resolv.conf to /sbin/resolvconf
Jan 21 13:33:28 matthew-PBL21 dnsmasq[21431]: started, version 2.59 cache disabled
Jan 21 13:33:28 matthew-PBL21 dnsmasq[21431]: compile time options: IPv6 GNU-getopt DBus i18n DHCP TFTP conntrack IDN
Jan 21 13:33:28 matthew-PBL21 dnsmasq[21431]: warning: no upstream servers configured
Jan 21 13:33:28 matthew-PBL21 NetworkManager[1003]: <info> (eth1): cleaning up...
Jan 21 13:33:28 matthew-PBL21 NetworkManager[1003]: <info> (eth1): taking down device.
Jan 21 13:33:28 matthew-PBL21 dbus[950]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 21 13:33:28 matthew-PBL21 dbus[950]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 21 13:33:29 matthew-PBL21 anacron[21585]: Anacron 2.3 started on 2013-01-21
Jan 21 13:33:29 matthew-PBL21 anacron[21585]: Normal exit (0 jobs run)

My latest Xorg.0.log:

[ 25.841]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 25.841] X Protocol Version 11, Revision 0
[ 25.841] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu
[ 25.841] Current Operating System: Linux matthew-PBL21 3.2.0-36-generic #57-Ubuntu SMP Tue Jan 8 21:44:52 UTC 2013 x86_64
[ 25.841] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-36-generic root=UUID=98a6580b-5403-44e9-9c6b-9cad6f1d03c4 ro quiet splash vt.handoff=7
[ 25.841] Build Date: 29 August 2012 12:12:33AM
[ 25.841] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support)
[ 25.841] Current version of pixman: 0.24.4
[ 25.841] Before reporting problems, check http://wiki.x.org
 to make sure that you have the latest version.
[ 25.841] Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.841] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 21 09:39:45 2013
[ 25.842] (==) Using config file: "/etc/X11/xorg.conf"
[ 25.842] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.842] (==) ServerLayout "Layout0"
[ 25.842] (**) |-->Screen "Screen0" (0)
[ 25.842] (**) | |-->Monitor "Monitor0"
[ 25.842] (**) | |-->Device "Device0"
[ 25.842] (**) |-->Input Device "Keyboard0"
[ 25.842] (**) |-->Input Device "Mouse0"
[ 25.842] (**) Option "Xinerama" "0"
[ 25.842] (==) Automatically adding devices
[ 25.842] (==) Automatically enabling devices
[ 25.842] (WW) The directory "/usr/share/fonts/default/Type1" does not exist.
[ 25.842] Entry deleted from font path.
[ 25.842] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 25.842] Entry deleted from font path.
[ 25.842] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 25.842] Entry deleted from font path.
[ 25.842] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 25.842] Entry deleted from font path.
[ 25.842] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 25.842] Entry deleted from font path.
[ 25.842] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 25.842] Entry deleted from font path.
[ 25.842] (**) FontPath set to:
 /usr/share/fonts/X11/misc,
 /usr/share/fonts/X11/Type1,
 /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
 built-ins
[ 25.842] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 25.842] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 25.842] (WW) Disabling Keyboard0
[ 25.842] (WW) Disabling Mouse0
[ 25.842] (II) Loader magic: 0x7fca8353cb00
[ 25.842] (II) Module ABI versions:
[ 25.842] X.Org ANSI C Emulation: 0.4
[ 25.842] X.Org Video Driver: 11.0
[ 25.842] X.Org XInput driver : 16.0
[ 25.842] X.Org Server Extension : 6.0
[ 25.843] (--) PCI:*(0:1:0:0) 10de:0df4:14c0:0059 rev 161, Mem @ 0xc2000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 25.843] (II) Open ACPI successful (/var/run/acpid.socket)
[ 25.843] (II) LoadModule: "extmod"
[ 25.864] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 25.864] (II) Module extmod: vendor="X.Org Foundation"
[ 25.864] compiled for 1.11.3, module version = 1.0.0
[ 25.864] Module class: X.Org Server Extension
[ 25.864] ABI class: X.Org Server Extension, version 6.0
[ 25.864] (II) Loading extension MIT-SCREEN-SAVER
[ 25.864] (II) Loading extension XFree86-VidModeExtension
[ 25.864] (II) Loading extension XFree86-DGA
[ 25.864] (II) Loading extension DPMS
[ 25.864] (II) Loading extension XVideo
[ 25.864] (II) Loading extension XVideo-MotionCompensation
[ 25.864] (II) Loading extension X-Resource
[ 25.864] (II) LoadModule: "dbe"
[ 25.865] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 25.865] (II) Module dbe: vendor="X.Org Foundation"
[ 25.865] compiled for 1.11.3, module version = 1.0.0
[ 25.865] Module class: X.Org Server Extension
[ 25.865] ABI class: X.Org Server Extension, version 6.0
[ 25.865] (II) Loading extension DOUBLE-BUFFER
[ 25.865] (II) LoadModule: "glx"
[ 25.865] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 25.873] (II) Module glx: vendor="NVIDIA Corporation"
[ 25.873] compiled for 4.0.2, module version = 1.0.0
[ 25.873] Module class: X.Org Server Extension
[ 25.873] (II) NVIDIA GLX Module 304.43 Sun Aug 19 20:34:01 PDT 2012
[ 25.873] (II) Loading extension GLX
[ 25.873] (II) LoadModule: "record"
[ 25.873] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 25.873] (II) Module record: vendor="X.Org Foundation"
[ 25.873] compiled for 1.11.3, module version = 1.13.0
[ 25.873] Module class: X.Org Server Extension
[ 25.873] ABI class: X.Org Server Extension, version 6.0
[ 25.873] (II) Loading extension RECORD
[ 25.873] (II) LoadModule: "dri"
[ 25.874] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 25.874] (II) Module dri: vendor="X.Org Foundation"
[ 25.874] compiled for 1.11.3, module version = 1.0.0
[ 25.874] ABI class: X.Org Server Extension, version 6.0
[ 25.874] (II) Loading extension XFree86-DRI
[ 25.874] (II) LoadModule: "dri2"
[ 25.874] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 25.874] (II) Module dri2: vendor="X.Org Foundation"
[ 25.874] compiled for 1.11.3, module version = 1.2.0
[ 25.874] ABI class: X.Org Server Extension, version 6.0
[ 25.874] (II) Loading extension DRI2
[ 25.874] (II) LoadModule: "nvidia"
[ 25.874] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 25.875] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 25.875] compiled for 4.0.2, module version = 1.0.0
[ 25.875] Module class: X.Org Video Driver
[ 25.875] (II) NVIDIA dlloader X Driver 304.43 Sun Aug 19 20:15:32 PDT 2012
[ 25.875] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 25.875] (++) using VT number 7

[ 25.875] (II) Loading sub module "fb"
[ 25.875] (II) LoadModule: "fb"
[ 25.875] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.875] (II) Module fb: vendor="X.Org Foundation"
[ 25.875] compiled for 1.11.3, module version = 1.0.0
[ 25.875] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.875] (II) Loading sub module "wfb"
[ 25.875] (II) LoadModule: "wfb"
[ 25.876] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 25.876] (II) Module wfb: vendor="X.Org Foundation"
[ 25.876] compiled for 1.11.3, module version = 1.0.0
[ 25.876] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.876] (II) Loading sub module "ramdac"
[ 25.876] (II) LoadModule: "ramdac"
[ 25.876] (II) Module "ramdac" already built-in
[ 25.876] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 25.876] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 25.876] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.876] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 25.876] (==) NVIDIA(0): RGB weight 888
[ 25.876] (==) NVIDIA(0): Default visual is TrueColor
[ 25.876] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 25.876] (**) NVIDIA(0): Option "NoLogo" "true"
[ 25.876] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
[ 25.876] (**) NVIDIA(0): Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x3333"
[ 25.876] (**) NVIDIA(0): Option "MetaModes" "CRT: 1360x768 +0+0, DFP: nvidia-auto-select +1360+300; CRT: NULL, DFP: nvidia-auto-select +0+0; CRT: 1360x768 +0+0, DFP: NULL"
[ 25.876] (**) NVIDIA(0): Enabling 2D acceleration
[ 27.002] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 27.002] (II) NVIDIA(GPU-0): Vision stereo.
[ 27.002] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 27.002] (II) NVIDIA(GPU-0): stereo.
[ 27.003] (II) NVIDIA(0): NVIDIA GPU GeForce GT 540M (GF108) at PCI:1:0:0 (GPU-0)
[ 27.003] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 27.003] (--) NVIDIA(0): VideoBIOS: 70.08.3c.00.1b
[ 27.003] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 27.003] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 27.005] (--) NVIDIA(0): Valid display device(s) on GeForce GT 540M at PCI:1:0:0
[ 27.005] (--) NVIDIA(0): Samsung SMB1930N (CRT-0) (connected)
[ 27.005] (--) NVIDIA(0): LGD (DFP-0) (connected)
[ 27.005] (--) NVIDIA(0): DFP-1
[ 27.005] (--) NVIDIA(0): Samsung SMB1930N (CRT-0): 400.0 MHz maximum pixel clock
[ 27.005] (--) NVIDIA(0): LGD (DFP-0): 330.0 MHz maximum pixel clock
[ 27.005] (--) NVIDIA(0): LGD (DFP-0): Internal Dual Link LVDS
[ 27.005] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 27.005] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 27.006] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 27.006] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 27.006] (**) NVIDIA(0): has been enabled on all display devices.)
[ 27.007] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 27.007] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 27.007] (**) NVIDIA(0): enabled on all display devices.)
[ 27.007] (II) NVIDIA(0): Validated MetaModes:
[ 27.007] (II) NVIDIA(0): "CRT:1360x768+0+0,DFP:nvidia-auto-select+1360+300"
[ 27.007] (II) NVIDIA(0): "CRT:NULL,DFP:nvidia-auto-select+0+0"
[ 27.007] (II) NVIDIA(0): "CRT:1360x768+0+0,DFP:NULL"
[ 27.007] (II) NVIDIA(0): Virtual screen size determined to be 2726 x 1068
[ 28.074] (--) NVIDIA(0): DPI set to (84, 84); computed from "UseEdidDpi" X config
[ 28.074] (--) NVIDIA(0): option
[ 28.074] (--) Depth 24 pixmap format is 32 bpp
[ 28.074] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 28.074] (II) NVIDIA: access.
[ 28.142] (II) NVIDIA(0): Setting mode "CRT:1360x768+0+0,DFP:nvidia-auto-select+1360+300"
[ 28.479] (II) Loading extension NV-GLX
[ 28.582] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 28.582] (==) NVIDIA(0): Backing store disabled
[ 28.582] (==) NVIDIA(0): Silken mouse enabled
[ 28.583] (**) NVIDIA(0): DPMS enabled
[ 28.583] (II) Loading extension NV-CONTROL
[ 28.583] (II) Loading extension XINERAMA
[ 28.583] (WW) NVIDIA(0): Option "TwinView" is not used
[ 28.583] (II) Loading sub module "dri2"
[ 28.583] (II) LoadModule: "dri2"
[ 28.583] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 28.583] (II) Module dri2: vendor="X.Org Foundation"
[ 28.583] compiled for 1.11.3, module version = 1.2.0
[ 28.583] ABI class: X.Org Server Extension, version 6.0
[ 28.583] (II) NVIDIA(0): [DRI2] Setup complete
[ 28.583] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 28.583] (--) RandR disabled
[ 28.583] (II) Initializing built-in extension Generic Event Extension
[ 28.583] (II) Initializing built-in extension SHAPE
[ 28.583] (II) Initializing built-in extension MIT-SHM
[ 28.583] (II) Initializing built-in extension XInputExtension
[ 28.583] (II) Initializing built-in extension XTEST
[ 28.583] (II) Initializing built-in extension BIG-REQUESTS
[ 28.583] (II) Initializing built-in extension SYNC
[ 28.583] (II) Initializing built-in extension XKEYBOARD
[ 28.583] (II) Initializing built-in extension XC-MISC
[ 28.583] (II) Initializing built-in extension SECURITY
[ 28.583] (II) Initializing built-in extension XINERAMA
[ 28.583] (II) Initializing built-in extension XFIXES
[ 28.583] (II) Initializing built-in extension RENDER
[ 28.583] (II) Initializing built-in extension RANDR
[ 28.583] (II) Initializing built-in extension COMPOSITE
[ 28.583] (II) Initializing built-in extension DAMAGE
[ 28.584] (II) Initializing extension GLX
[ 28.596] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 28.598] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 28.598] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.598] (II) LoadModule: "evdev"
[ 28.598] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.598] (II) Module evdev: vendor="X.Org Foundation"
[ 28.598] compiled for 1.11.3, module version = 2.7.0
[ 28.598] Module class: X.Org XInput Driver
[ 28.598] ABI class: X.Org XInput driver, version 16.0
[ 28.598] (II) Using input driver 'evdev' for 'Power Button'
[ 28.598] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.598] (**) Power Button: always reports core events
[ 28.598] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 28.598] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.598] (--) evdev: Power Button: Found keys
[ 28.598] (II) evdev: Power Button: Configuring as keyboard
[ 28.598] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 28.598] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 28.598] (**) Option "xkb_rules" "evdev"
[ 28.598] (**) Option "xkb_model" "pc105"
[ 28.598] (**) Option "xkb_layout" "gb"
[ 28.599] (II) XKB: reuse xkmfile /var/lib/xkb/server-2B4266AA55228AE7D9557A18F1965DBA19850816.xkm
[ 28.600] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 28.600] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 28.600] (II) Using input driver 'evdev' for 'Sleep Button'
[ 28.600] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.600] (**) Sleep Button: always reports core events
[ 28.600] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 28.600] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 28.600] (--) evdev: Sleep Button: Found keys
[ 28.600] (II) evdev: Sleep Button: Configuring as keyboard
[ 28.600] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/PNP0C0E:00/input/input1/event1"
[ 28.600] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 28.600] (**) Option "xkb_rules" "evdev"
[ 28.600] (**) Option "xkb_model" "pc105"
[ 28.600] (**) Option "xkb_layout" "gb"
[ 28.600] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 28.600] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 28.600] (II) Using input driver 'evdev' for 'Video Bus'
[ 28.600] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.600] (**) Video Bus: always reports core events
[ 28.600] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 28.600] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 28.600] (--) evdev: Video Bus: Found keys
[ 28.600] (II) evdev: Video Bus: Configuring as keyboard
[ 28.600] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input5/event5"
[ 28.600] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 28.600] (**) Option "xkb_rules" "evdev"
[ 28.600] (**) Option "xkb_model" "pc105"
[ 28.600] (**) Option "xkb_layout" "gb"
[ 28.600] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 28.600] (II) No input driver specified, ignoring this device.
[ 28.600] (II) This device may have been added with another device file.
[ 28.601] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[ 28.601] (II) No input driver specified, ignoring this device.
[ 28.601] (II) This device may have been added with another device file.
[ 28.601] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[ 28.601] (II) No input driver specified, ignoring this device.
[ 28.601] (II) This device may have been added with another device file.
[ 28.601] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 28.601] (II) No input driver specified, ignoring this device.
[ 28.601] (II) This device may have been added with another device file.
[ 28.601] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[ 28.601] (II) No input driver specified, ignoring this device.
[ 28.601] (II) This device may have been added with another device file.
[ 28.601] (II) config/udev: Adding input device USB Video Device (/dev/input/event6)
[ 28.601] (**) USB Video Device: Applying InputClass "evdev keyboard catchall"
[ 28.601] (II) Using input driver 'evdev' for 'USB Video Device'
[ 28.601] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.601] (**) USB Video Device: always reports core events
[ 28.601] (**) evdev: USB Video Device: Device: "/dev/input/event6"
[ 28.601] (--) evdev: USB Video Device: Vendor 0x174f Product 0x1442
[ 28.601] (--) evdev: USB Video Device: Found keys
[ 28.601] (II) evdev: USB Video Device: Configuring as keyboard
[ 28.601] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6/event6"
[ 28.601] (II) XINPUT: Adding extended input device "USB Video Device" (type: KEYBOARD, id 9)
[ 28.601] (**) Option "xkb_rules" "evdev"
[ 28.601] (**) Option "xkb_model" "pc105"
[ 28.601] (**) Option "xkb_layout" "gb"
[ 28.602] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 28.602] (II) No input driver specified, ignoring this device.
[ 28.602] (II) This device may have been added with another device file.
[ 28.602] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 28.602] (II) No input driver specified, ignoring this device.
[ 28.602] (II) This device may have been added with another device file.
[ 28.602] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event4)
[ 28.602] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 28.602] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[ 28.602] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.602] (**) Logitech USB Laser Mouse: always reports core events
[ 28.602] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event4"
[ 28.602] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc062
[ 28.602] (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons
[ 28.602] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s)
[ 28.602] (--) evdev: Logitech USB Laser Mouse: Found relative axes
[ 28.602] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes
[ 28.602] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse
[ 28.602] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support
[ 28.602] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 28.602] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28.602] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4/event4"
[ 28.602] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 10)
[ 28.602] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes.
[ 28.602] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 28.602] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[ 28.602] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[ 28.602] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[ 28.602] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[ 28.602] (II) No input driver specified, ignoring this device.
[ 28.602] (II) This device may have been added with another device file.
[ 28.603] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 28.603] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 28.603] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 28.603] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.603] (**) AT Translated Set 2 keyboard: always reports core events
[ 28.603] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 28.603] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 28.603] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 28.603] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 28.603] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 28.603] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 28.603] (**) Option "xkb_rules" "evdev"
[ 28.603] (**) Option "xkb_model" "pc105"
[ 28.603] (**) Option "xkb_layout" "gb"
[ 28.603] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[ 28.603] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 28.603] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 28.603] (II) LoadModule: "synaptics"
[ 28.603] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 28.603] (II) Module synaptics: vendor="X.Org Foundation"
[ 28.603] compiled for 1.11.3, module version = 1.6.2
[ 28.603] Module class: X.Org XInput Driver
[ 28.603] ABI class: X.Org XInput driver, version 16.0
[ 28.603] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 28.603] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 28.603] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 28.603] (**) Option "Device" "/dev/input/event13"
[ 28.612] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 28.612] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5608
[ 28.612] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4638
[ 28.612] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 28.612] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 28.612] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 28.612] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 28.612] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 28.612] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 28.620] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"
[ 28.620] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 28.620] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 28.620] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 28.620] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 28.620] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 28.620] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 28.620] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 28.620] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 28.620] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 28.620] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 28.620] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 29.023] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 29.023] (II) NVIDIA(GPU-0): Vision stereo.
[ 29.023] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 29.023] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 29.023] (**) NVIDIA(0): has been enabled on all display devices.)
[ 29.024] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 29.024] (II) NVIDIA(GPU-0): stereo.
[ 29.024] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 29.024] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 29.024] (**) NVIDIA(0): enabled on all display devices.)
[ 29.480] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 29.480] (II) NVIDIA(GPU-0): Vision stereo.
[ 29.480] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 29.480] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 29.480] (**) NVIDIA(0): has been enabled on all display devices.)
[ 29.487] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 29.487] (II) NVIDIA(GPU-0): stereo.
[ 29.487] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 29.487] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 29.487] (**) NVIDIA(0): enabled on all display devices.)
[ 54.246] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 54.246] (II) NVIDIA(GPU-0): Vision stereo.
[ 54.246] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 54.246] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 54.246] (**) NVIDIA(0): has been enabled on all display devices.)
[ 54.248] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 54.248] (II) NVIDIA(GPU-0): stereo.
[ 54.248] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 54.248] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 54.248] (**) NVIDIA(0): enabled on all display devices.)
[ 54.971] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 54.971] (II) NVIDIA(GPU-0): Vision stereo.
[ 54.971] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 54.971] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 54.971] (**) NVIDIA(0): has been enabled on all display devices.)
[ 54.973] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 54.973] (II) NVIDIA(GPU-0): stereo.
[ 54.973] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 54.973] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 54.973] (**) NVIDIA(0): enabled on all display devices.)
[ 55.778] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 55.778] (II) NVIDIA(GPU-0): Vision stereo.
[ 55.778] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 55.778] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 55.778] (**) NVIDIA(0): has been enabled on all display devices.)
[ 55.780] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 55.780] (II) NVIDIA(GPU-0): stereo.
[ 55.780] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 55.780] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 55.780] (**) NVIDIA(0): enabled on all display devices.)
[ 57.015] (II) XKB: reuse xkmfile /var/lib/xkb/server-FD7A0CB0375C24DE7821F8D571E92D2A0CAED22C.xkm
[ 75.008] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 75.012] (II) NVIDIA(GPU-0): Vision stereo.
[ 75.012] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 75.012] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 75.012] (**) NVIDIA(0): has been enabled on all display devices.)
[ 75.014] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 75.014] (II) NVIDIA(GPU-0): stereo.
[ 75.014] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 75.014] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 75.014] (**) NVIDIA(0): enabled on all display devices.)
[ 9715.970] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 9715.970] (II) NVIDIA(GPU-0): Vision stereo.
[ 9715.970] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 9715.970] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 9715.970] (**) NVIDIA(0): has been enabled on all display devices.)
[ 9715.971] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 9715.971] (II) NVIDIA(GPU-0): stereo.
[ 9715.971] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 9715.971] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 9715.971] (**) NVIDIA(0): enabled on all display devices.)
[ 13892.146] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 13892.147] (II) NVIDIA(GPU-0): Vision stereo.
[ 13892.147] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13892.147] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 13892.147] (**) NVIDIA(0): has been enabled on all display devices.)
[ 13892.148] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 13892.148] (II) NVIDIA(GPU-0): stereo.
[ 13892.148] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13892.148] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 13892.148] (**) NVIDIA(0): enabled on all display devices.)
[ 13893.598] (II) NVIDIA(0): Setting mode "VGA-0: 1360x768 @1360x768 +0+0"
[ 13893.683] (II) NVIDIA(0): Setting mode "NULL"
[ 13893.730] (II) NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1360x768 +0+0"
[ 13914.117] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 13914.117] (II) NVIDIA(GPU-0): Vision stereo.
[ 13914.117] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13914.117] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 13914.117] (**) NVIDIA(0): has been enabled on all display devices.)
[ 13914.118] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 13914.118] (II) NVIDIA(GPU-0): stereo.
[ 13914.118] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13914.118] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 13914.118] (**) NVIDIA(0): enabled on all display devices.)
[ 13914.244] (II) NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1360x768 +0+0"
[ 13922.148] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 13922.148] (II) NVIDIA(GPU-0): Vision stereo.
[ 13922.148] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13922.148] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 13922.148] (**) NVIDIA(0): has been enabled on all display devices.)
[ 13922.149] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 13922.149] (II) NVIDIA(GPU-0): stereo.
[ 13922.149] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13922.149] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 13922.149] (**) NVIDIA(0): enabled on all display devices.)
[ 13922.297] (II) NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1360x768 +1366+0"
[ 13922.384] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1366x768 +0+0, VGA-0: nvidia-auto-select @1360x768 +1366+0"
[ 13922.885] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 13922.885] (II) NVIDIA(GPU-0): Vision stereo.
[ 13922.885] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13922.885] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 13922.885] (**) NVIDIA(0): has been enabled on all display devices.)
[ 13922.886] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 13922.887] (II) NVIDIA(GPU-0): stereo.
[ 13922.887] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13922.887] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 13922.887] (**) NVIDIA(0): enabled on all display devices.)
[ 13924.091] (II) NVIDIA(0): Setting mode "CRT:NULL,DFP:nvidia-auto-select+0+0"
[ 13928.934] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 13928.934] (II) NVIDIA(GPU-0): Vision stereo.
[ 13928.934] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13928.934] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 13928.934] (**) NVIDIA(0): has been enabled on all display devices.)
[ 13928.935] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 13928.935] (II) NVIDIA(GPU-0): stereo.
[ 13928.935] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13928.935] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 13928.935] (**) NVIDIA(0): enabled on all display devices.)
[ 13930.088] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1366x768 +0+0, VGA-0: nvidia-auto-select @1360x768 +1366+0"
[ 13966.210] (WW) NVIDIA(0): Specified panning domain height of 720 is smaller than
[ 13966.210] (WW) NVIDIA(0): viewport height 768; adjusting
[ 13966.210] (WW) NVIDIA(0): Specified panning domain height of 765 is smaller than
[ 13966.210] (WW) NVIDIA(0): viewport height 768; adjusting
[ 13967.472] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select@1366x768+1360+300,CRT-0:nvidia-auto-select@1360x768+0+0"
[ 13969.871] (WW) NVIDIA(0): Specified panning domain width of 1280 is smaller than
[ 13969.871] (WW) NVIDIA(0): viewport width 1360; adjusting
[ 13969.871] (WW) NVIDIA(0): Specified panning domain height of 720 is smaller than
[ 13969.871] (WW) NVIDIA(0): viewport height 768; adjusting
[ 13969.871] (WW) NVIDIA(0): Specified panning domain height of 765 is smaller than
[ 13969.871] (WW) NVIDIA(0): viewport height 768; adjusting
[ 13969.875] (WW) NVIDIA(0): Specified panning domain height of 720 is smaller than
[ 13969.875] (WW) NVIDIA(0): viewport height 768; adjusting
[ 13969.875] (WW) NVIDIA(0): Specified panning domain height of 765 is smaller than
[ 13969.875] (WW) NVIDIA(0): viewport height 768; adjusting
[ 14066.227] (II) Open ACPI successful (/var/run/acpid.socket)
[ 14066.270] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select@1366x768+1360+300,CRT-0:nvidia-auto-select@1360x768+0+0"
[ 14067.832] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 15464.600] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 15464.600] (II) NVIDIA(GPU-0): Vision stereo.
[ 15464.600] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15464.600] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 15464.600] (**) NVIDIA(0): has been enabled on all display devices.)
[ 15464.601] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 15464.601] (II) NVIDIA(GPU-0): stereo.
[ 15464.602] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15464.602] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 15464.602] (**) NVIDIA(0): enabled on all display devices.)
[ 17969.513] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 17969.513] (II) NVIDIA(GPU-0): Vision stereo.
[ 17969.513] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17969.513] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 17969.513] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17969.514] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 17969.514] (II) NVIDIA(GPU-0): stereo.
[ 17969.514] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17969.514] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 17969.514] (**) NVIDIA(0): enabled on all display devices.)
[ 20526.909] (II) NVIDIA(GPU-0): Display (Samsung SMB1930N (CRT-0)) does not support NVIDIA 3D
[ 20526.909] (II) NVIDIA(GPU-0): Vision stereo.
[ 20526.909] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 20526.909] (**) NVIDIA(0): device Samsung SMB1930N (CRT-0) (Using EDID frequencies
[ 20526.909] (**) NVIDIA(0): has been enabled on all display devices.)
[ 20526.911] (II) NVIDIA(GPU-0): Display (LGD (DFP-0)) does not support NVIDIA 3D Vision
[ 20526.911] (II) NVIDIA(GPU-0): stereo.
[ 20526.911] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 20526.911] (**) NVIDIA(0): device LGD (DFP-0) (Using EDID frequencies has been
[ 20526.911] (**) NVIDIA(0): enabled on all display devices.)
[ 21769.087] (II) Open ACPI successful (/var/run/acpid.socket)
[ 21769.131] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select@1366x768+1360+300,CRT-0:nvidia-auto-select@1360x768+0+0"
[ 21770.721] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found

My xorg.conf:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 295.40 (<email address hidden>) Thu Apr 12 13:40:22 CEST 2012

Section "Files"
 FontPath "/usr/share/fonts/default/Type1"
EndSection

Section "Monitor"
 Identifier "Monitor0"
 VendorName "Unknown"
 ModelName "Samsung SMB1930N"
 HorizSync 30.0 - 61.0
 VertRefresh 56.0 - 75.0
 Option "DPMS"
 # HorizSync source: edid, VertRefresh source: edid
EndSection

Section "Screen"
 Identifier "Screen0"
 Device "Device0"
 Monitor "Monitor0"
 DefaultDepth 24
 Option "TwinView" "1"
 Option "TwinViewXineramaInfoOrder" "DFP-0"
 Option "nologo" "true"
 SubSection "Display"
  Depth 24
 EndSubSection
EndSection

Section "InputDevice"
 Identifier "Mouse0"
 Driver "mouse"
 Option "Protocol" "auto"
 Option "Device" "/dev/input/mice"
 Option "Emulate3Buttons" "no"
 Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
 Identifier "Keyboard0"
 Driver "keyboard"
 Option "XkbLayout" "gb"
 Option "XkbModel" "pc105"
 # generated from data in "/etc/sysconfig/keyboard"
EndSection

Section "ServerLayout"
 Identifier "Layout0"
 Screen 0 "Screen0" 0 0
 InputDevice "Keyboard0" "CoreKeyboard"
 InputDevice "Mouse0" "CorePointer"
 Option "Xinerama" "0"
EndSection

Section "Device"
 Identifier "Device0"
 Driver "nvidia"
 VendorName "NVIDIA Corporation"
 BoardName "GeForce GT 540M"
 Option "metamodes" "CRT: 1360x768 +0+0, DFP: nvidia-auto-select +1360+300; CRT: NULL, DFP: nvidia-auto-select +0+0; CRT: 1360x768 +0+0, DFP: NULL"
 Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x3333"
 Option "NoLogo" "True"
EndSection

I hope this gives you enough information. If you need any more then let me know.

Tags: precise
bugbot (bugbot)
tags: added: precise
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.