[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 14:17:33 UTC 2010 (Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002ffd0000 (usable) [ 0.000000] BIOS-e820: 000000002ffd0000 - 000000002ffdf000 (ACPI data) [ 0.000000] BIOS-e820: 000000002ffdf000 - 0000000030000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x2ffd0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000002ffd0000 (usable) [ 0.000000] modified: 000000002ffd0000 - 000000002ffdf000 (ACPI data) [ 0.000000] modified: 000000002ffdf000 - 0000000030000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff7c0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000002ffd0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 002fc00000 page 2M [ 0.000000] 002fc00000 - 002ffd0000 page 4k [ 0.000000] kernel direct mapping tables up to 2ffd0000 @ 10000-15000 [ 0.000000] RAMDISK: 23884000 - 2401b61d [ 0.000000] ACPI: RSDP 000f9d30 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 2ffd0000 00030 (v01 A M I OEMRSDT 06000327 MSFT 00000097) [ 0.000000] ACPI: FACP 2ffd0200 00081 (v02 A M I OEMFACP 06000327 MSFT 00000097) [ 0.000000] ACPI: DSDT 2ffd03f0 036C7 (v01 A7N8X A7N8X000 00000000 INTL 02002026) [ 0.000000] ACPI: FACS 2ffdf000 00040 [ 0.000000] ACPI: APIC 2ffd0390 0005E (v01 A M I OEMAPIC 06000327 MSFT 00000097) [ 0.000000] ACPI: OEMB 2ffdf040 00041 (v01 A M I OEMBIOS 06000327 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 767MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2ffd0000 [ 0.000000] low ram: 0 - 2ffd0000 [ 0.000000] node 0 low ram: 00000000 - 2ffd0000 [ 0.000000] node 0 bootmap 00011000 - 00016ffc [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 002ffd0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ddeb8] TEXT DATA BSS ==> [0000100000 - 00008ddeb8] [ 0.000000] #4 [0023884000 - 002401b61d] RAMDISK ==> [0023884000 - 002401b61d] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008de000 - 00008e119c] BRK ==> [00008de000 - 00008e119c] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002ffd0 [ 0.000000] HighMem 0x0002ffd0 -> 0x0002ffd0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0002ffd0 [ 0.000000] On node 0 totalpages: 196447 [ 0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1504 pages used for memmap [ 0.000000] Normal zone: 190960 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:cec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194911 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=91661416-8675-40fa-884a-b55efa82f47c ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3930880 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 758816k/786240k available (4679k kernel code, 26724k reserved, 2124k data, 660k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf07d0000 - 0xff7fe000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xeffd0000 ( 767 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB) [ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2163.015 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4326.03 BogoMIPS (lpj=8652060) [ 0.004027] Security Framework initialized [ 0.004056] AppArmor: AppArmor initialized [ 0.004065] Mount-cache hash table entries: 512 [ 0.004210] Initializing cgroup subsys ns [ 0.004215] Initializing cgroup subsys cpuacct [ 0.004220] Initializing cgroup subsys memory [ 0.004230] Initializing cgroup subsys devices [ 0.004233] Initializing cgroup subsys freezer [ 0.004236] Initializing cgroup subsys net_cls [ 0.004257] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004261] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004266] mce: CPU supports 4 MCE banks [ 0.004283] Performance Events: AMD PMU driver. [ 0.004292] ... version: 0 [ 0.004294] ... bit width: 48 [ 0.004296] ... generic registers: 4 [ 0.004299] ... value mask: 0000ffffffffffff [ 0.004301] ... max period: 00007fffffffffff [ 0.004303] ... fixed-purpose events: 0 [ 0.004305] ... event mask: 000000000000000f [ 0.004310] Checking 'hlt' instruction... OK. [ 0.020502] SMP alternatives: switching to UP code [ 0.026218] Freeing SMP alternatives: 19k freed [ 0.026245] ACPI: Core revision 20090903 [ 0.032238] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.032247] ftrace: allocating 21780 entries in 43 pages [ 0.036140] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036531] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.078595] CPU0: AMD Athlon(tm) XP 3000+ stepping 00 [ 0.080001] Brought up 1 CPUs [ 0.080001] Total of 1 processors activated (4326.03 BogoMIPS). [ 0.080001] CPU0 attaching NULL sched-domain. [ 0.080001] devtmpfs: initialized [ 0.080001] regulator: core version 0.5 [ 0.080001] Time: 12:14:45 Date: 09/25/10 [ 0.080001] NET: Registered protocol family 16 [ 0.080001] EISA bus registered [ 0.080001] ACPI: bus type pci registered [ 0.080001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 0.080001] PCI: Using configuration type 1 for base access [ 0.080001] bio: create slab at 0 [ 0.080001] ACPI: EC: Look up EC in DSDT [ 0.082330] ACPI: Executed 1 blocks of module-level executable AML code [ 0.085259] ACPI: Interpreter enabled [ 0.085270] ACPI: (supports S0 S1 S3 S4 S5) [ 0.085297] ACPI: Using IOAPIC for interrupt routing [ 0.092686] ACPI Warning: Incorrect checksum in table [OEMB] - 93, should be 86 (20090903/tbutils-314) [ 0.092783] ACPI: No dock devices found. [ 0.092902] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.092955] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.092972] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup [ 0.093193] pci 0000:00:01.1: reg 10 io port: [0xec00-0xec1f] [ 0.093230] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.093234] pci 0000:00:01.1: PME# disabled [ 0.093267] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe900000-0xfe900fff] [ 0.093303] pci 0000:00:02.0: supports D1 D2 [ 0.093305] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093309] pci 0000:00:02.0: PME# disabled [ 0.093336] pci 0000:00:02.1: reg 10 32bit mmio: [0xfea00000-0xfea00fff] [ 0.093372] pci 0000:00:02.1: supports D1 D2 [ 0.093374] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093378] pci 0000:00:02.1: PME# disabled [ 0.093412] pci 0000:00:02.2: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 0.093453] pci 0000:00:02.2: supports D1 D2 [ 0.093456] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093460] pci 0000:00:02.2: PME# disabled [ 0.093495] pci 0000:00:04.0: reg 10 32bit mmio: [0xfe800000-0xfe800fff] [ 0.093501] pci 0000:00:04.0: reg 14 io port: [0xe880-0xe887] [ 0.093533] pci 0000:00:04.0: supports D1 D2 [ 0.093536] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093540] pci 0000:00:04.0: PME# disabled [ 0.093568] pci 0000:00:06.0: reg 10 io port: [0xe000-0xe0ff] [ 0.093574] pci 0000:00:06.0: reg 14 io port: [0xef00-0xef7f] [ 0.093581] pci 0000:00:06.0: reg 18 32bit mmio: [0xfe500000-0xfe500fff] [ 0.093609] pci 0000:00:06.0: supports D1 D2 [ 0.093677] pci 0000:00:09.0: reg 20 io port: [0xffa0-0xffaf] [ 0.093728] pci 0000:00:0d.0: reg 10 32bit mmio: [0xfe400000-0xfe4007ff] [ 0.093735] pci 0000:00:0d.0: reg 14 32bit mmio: [0xfe300000-0xfe30003f] [ 0.093767] pci 0000:00:0d.0: supports D1 D2 [ 0.093769] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093773] pci 0000:00:0d.0: PME# disabled [ 0.093900] pci 0000:02:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 0.093907] pci 0000:02:00.0: reg 14 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.093928] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfda00000-0xfda1ffff] [ 0.093983] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb900000-0xfdafffff] [ 0.093987] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe3800000-0xf37fffff] [ 0.093998] pci_bus 0000:00: on NUMA node 0 [ 0.094003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.094105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 0.094222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.101836] ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *11 [ 0.102009] ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *0, disabled. [ 0.102180] ACPI: PCI Interrupt Link [LNKC] (IRQs 18) *0, disabled. [ 0.102349] ACPI: PCI Interrupt Link [LNKD] (IRQs 19) *0, disabled. [ 0.102519] ACPI: PCI Interrupt Link [LNKE] (IRQs 16) *0, disabled. [ 0.102688] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *5 [ 0.102861] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *5 [ 0.103031] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *5 [ 0.103210] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *3 [ 0.103385] ACPI: PCI Interrupt Link [LAPU] (IRQs 20 21 22) *0, disabled. [ 0.103558] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *11 [ 0.103727] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *11 [ 0.103900] ACPI: PCI Interrupt Link [LKSM] (IRQs 23) *10 [ 0.104079] ACPI: PCI Interrupt Link [LFWR] (IRQs 20 21 22) *11 [ 0.104251] ACPI: PCI Interrupt Link [LETH] (IRQs 20 21 22) *0, disabled. [ 0.104451] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14 [ 0.104577] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.104580] vgaarb: loaded [ 0.104721] SCSI subsystem initialized [ 0.104811] libata version 3.00 loaded. [ 0.104909] usbcore: registered new interface driver usbfs [ 0.104923] usbcore: registered new interface driver hub [ 0.104956] usbcore: registered new device driver usb [ 0.105117] ACPI: WMI: Mapper loaded [ 0.105120] PCI: Using ACPI for IRQ routing [ 0.105282] NetLabel: Initializing [ 0.105285] NetLabel: domain hash size = 128 [ 0.105287] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.105305] NetLabel: unlabeled traffic allowed by default [ 0.105348] Switching to clocksource tsc [ 0.107555] AppArmor: AppArmor Filesystem Enabled [ 0.107584] pnp: PnP ACPI init [ 0.107609] ACPI: bus type pnp registered [ 0.110465] pnp: PnP ACPI: found 12 devices [ 0.110468] ACPI: ACPI bus type pnp unregistered [ 0.110473] PnPBIOS: Disabled by ACPI PNP [ 0.110491] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.110498] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.110502] system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.110506] system 00:08: iomem range 0xff780000-0xff7bffff has been reserved [ 0.110511] system 00:09: ioport range 0x480-0x4ff could not be reserved [ 0.110518] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.110521] system 00:0b: iomem range 0xc0000-0xdffff could not be reserved [ 0.110525] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.110528] system 00:0b: iomem range 0x100000-0x2fffffff could not be reserved [ 0.110531] system 00:0b: iomem range 0xff7c0000-0xffffffff has been reserved [ 0.145263] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.145266] pci 0000:00:08.0: IO window: disabled [ 0.145271] pci 0000:00:08.0: MEM window: disabled [ 0.145276] pci 0000:00:08.0: PREFETCH window: disabled [ 0.145282] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.145284] pci 0000:00:1e.0: IO window: disabled [ 0.145289] pci 0000:00:1e.0: MEM window: 0xfb900000-0xfdafffff [ 0.145294] pci 0000:00:1e.0: PREFETCH window: 0xe3800000-0xf37fffff [ 0.145308] pci 0000:00:08.0: setting latency timer to 64 [ 0.145317] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.145320] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.145323] pci_bus 0000:02: resource 1 mem: [0xfb900000-0xfdafffff] [ 0.145326] pci_bus 0000:02: resource 2 pref mem [0xe3800000-0xf37fffff] [ 0.145369] NET: Registered protocol family 2 [ 0.145472] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.145903] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.147396] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.148129] TCP: Hash tables configured (established 131072 bind 65536) [ 0.148132] TCP reno registered [ 0.148266] NET: Registered protocol family 1 [ 3.218408] pci 0000:02:00.0: Boot video device [ 3.218650] cpufreq-nforce2: Detected nForce2 chipset revision C1 [ 3.218653] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss. [ 3.218662] cpufreq-nforce2: FSB currently at 165 MHz, FID 13.0 [ 3.218686] Marking TSC unstable due to cpufreq changes [ 3.219589] Scanning for low memory corruption every 60 seconds [ 3.219704] audit: initializing netlink socket (disabled) [ 3.219718] type=2000 audit(1285416888.218:1): initialized [ 3.228678] Switching to clocksource acpi_pm [ 3.228783] Trying to unpack rootfs image as initramfs... [ 3.240505] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 3.248083] VFS: Disk quotas dquot_6.5.2 [ 3.248207] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.248919] fuse init (API version 7.13) [ 3.249016] msgmni has been set to 1482 [ 3.249276] alg: No test for stdrng (krng) [ 3.249313] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.249317] io scheduler noop registered [ 3.249319] io scheduler anticipatory registered [ 3.249321] io scheduler deadline registered [ 3.249368] io scheduler cfq registered (default) [ 3.249511] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.249536] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.249654] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 3.249660] ACPI: Power Button [PWRB] [ 3.249721] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.249725] ACPI: Power Button [PWRF] [ 3.249977] processor LNXCPU:00: registered as cooling_device0 [ 3.257528] isapnp: Scanning for PnP cards... [ 3.263326] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.263449] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.263823] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.265083] brd: module loaded [ 3.265654] loop: module loaded [ 3.265756] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 3.265985] pata_acpi 0000:00:09.0: setting latency timer to 64 [ 3.266351] Fixed MDIO Bus: probed [ 3.266397] PPP generic driver version 2.4.2 [ 3.266445] tun: Universal TUN/TAP device driver, 1.6 [ 3.266447] tun: (C) 1999-2004 Max Krasnyansky [ 3.266538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.266892] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 3.266899] alloc irq_desc for 22 on node -1 [ 3.266901] alloc kstat_irqs on node -1 [ 3.266911] ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22 [ 3.266932] ehci_hcd 0000:00:02.2: setting latency timer to 64 [ 3.266936] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 3.266976] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 3.267019] ehci_hcd 0000:00:02.2: debug port 1 [ 3.267028] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported [ 3.267048] ehci_hcd 0000:00:02.2: irq 22, io mem 0xfeb00000 [ 3.315883] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 3.316106] usb usb1: configuration #1 chosen from 1 choice [ 3.316148] hub 1-0:1.0: USB hub found [ 3.316164] hub 1-0:1.0: 6 ports detected [ 3.316241] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.316605] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21 [ 3.316611] alloc irq_desc for 21 on node -1 [ 3.316614] alloc kstat_irqs on node -1 [ 3.316623] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, high) -> IRQ 21 [ 3.316645] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 3.316648] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 3.316706] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 3.316741] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe900000 [ 3.406338] usb usb2: configuration #1 chosen from 1 choice [ 3.406378] hub 2-0:1.0: USB hub found [ 3.406401] hub 2-0:1.0: 3 ports detected [ 3.406816] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20 [ 3.406822] alloc irq_desc for 20 on node -1 [ 3.406825] alloc kstat_irqs on node -1 [ 3.406835] ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 20 (level, high) -> IRQ 20 [ 3.406864] ohci_hcd 0000:00:02.1: setting latency timer to 64 [ 3.406868] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 3.406917] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 3.406953] ohci_hcd 0000:00:02.1: irq 20, io mem 0xfea00000 [ 3.498089] usb usb3: configuration #1 chosen from 1 choice [ 3.498131] hub 3-0:1.0: USB hub found [ 3.498150] hub 3-0:1.0: 3 ports detected [ 3.498230] uhci_hcd: USB Universal Host Controller Interface driver [ 3.498365] PNP: No PS/2 controller found. Probing ports directly. [ 3.504806] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.504818] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.505056] mice: PS/2 mouse device common for all mice [ 3.505223] rtc_cmos 00:02: RTC can wake from S4 [ 3.505284] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 3.505312] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 3.505437] device-mapper: uevent: version 1.0.3 [ 3.505583] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 3.508231] device-mapper: multipath: version 1.1.0 loaded [ 3.508236] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.508426] EISA: Probing bus 0 at eisa.0 [ 3.508448] Cannot allocate resource for EISA slot 4 [ 3.508467] EISA: Detected 0 cards. [ 3.512359] cpuidle: using governor ladder [ 3.512364] cpuidle: using governor menu [ 3.512878] TCP cubic registered [ 3.513038] NET: Registered protocol family 10 [ 3.513499] lo: Disabled Privacy Extensions [ 3.513810] NET: Registered protocol family 17 [ 3.513856] powernow-k8: Processor cpuid 6a0 not supported [ 3.513879] Using IPI No-Shortcut mode [ 3.514009] PM: Resume from disk failed. [ 3.514026] registered taskstats version 1 [ 3.514253] Magic number: 10:337:229 [ 3.514369] rtc_cmos 00:02: setting system clock to 2010-09-25 12:14:48 UTC (1285416888) [ 3.514373] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.514375] EDD information not available. [ 3.701411] Freeing initrd memory: 7773k freed [ 3.842358] isapnp: No Plug & Play device found [ 3.842387] Freeing unused kernel memory: 660k freed [ 3.843234] Write protecting the kernel text: 4680k [ 3.843266] Write protecting the kernel read-only data: 1844k [ 3.864164] udev: starting version 151 [ 3.896100] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 4.103091] Floppy drive(s): fd0 is 1.44M [ 4.104209] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 4.104536] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22 [ 4.104544] forcedeth 0000:00:04.0: PCI INT A -> Link[LKLN] -> GSI 22 (level, high) -> IRQ 22 [ 4.104550] forcedeth 0000:00:04.0: setting latency timer to 64 [ 4.104614] nv_probe: set workaround bit for reversed mac addr [ 4.117954] usb 3-1: configuration #1 chosen from 1 choice [ 4.123886] FDC 0 is a post-1991 82077 [ 4.141333] usbcore: registered new interface driver hiddev [ 4.150456] input: MLK Sangha 2.4G wireless mouse as /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.0/input/input3 [ 4.150913] generic-usb 0003:04FC:0538.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK Sangha 2.4G wireless mouse] on usb-0000:00:02.1-1/input0 [ 4.150946] usbcore: registered new interface driver usbhid [ 4.151038] usbhid: v2.6:USB HID core driver [ 4.300026] usb 3-2: new low speed USB device using ohci_hcd and address 3 [ 4.516902] usb 3-2: configuration #1 chosen from 1 choice [ 4.529140] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb3/3-2/3-2:1.0/input/input4 [ 4.529251] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.1-2/input0 [ 4.542855] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb3/3-2/3-2:1.1/input/input5 [ 4.542967] generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:02.1-2/input1 [ 4.624992] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:0c:6e:75:bd:e2 [ 4.624997] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 4.625144] pata_amd 0000:00:09.0: version 0.4.1 [ 4.625215] pata_amd 0000:00:09.0: setting latency timer to 64 [ 4.625659] scsi0 : pata_amd [ 4.625840] scsi1 : pata_amd [ 4.627807] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 4.627811] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 4.628314] ACPI: PCI Interrupt Link [LFWR] enabled at IRQ 21 [ 4.628321] ohci1394 0000:00:0d.0: PCI INT A -> Link[LFWR] -> GSI 21 (level, high) -> IRQ 21 [ 4.628326] ohci1394 0000:00:0d.0: setting latency timer to 64 [ 4.686030] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fe400000-fe4007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 4.793934] ata1.00: ATA-7: Maxtor 6L160P0, BAJ41G20, max UDMA/133 [ 4.793937] ata1.00: 320173056 sectors, multi 16: LBA48 [ 4.793963] ata1: nv_mode_filter: 0x7f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c0c0) ACPI=0x3f01f (17:900:0x11) [ 4.809847] ata1.00: configured for UDMA/100 [ 4.809991] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L160P0 BAJ4 PQ: 0 ANSI: 5 [ 4.810190] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.810548] sd 0:0:0:0: [sda] 320173056 512-byte logical blocks: (163 GB/152 GiB) [ 4.810612] sd 0:0:0:0: [sda] Write Protect is off [ 4.810615] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.810648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.810831] sda: sda1 sda2 sda3 sda4 [ 4.849892] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.980348] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S222A, SB02, max UDMA/66 [ 4.980381] ata2.01: ATAPI: Hewlett-Packard DVD Writer 300, 1.25, max UDMA/33 [ 4.980408] ata2: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc600c0c0) ACPI=0x701f (54:54:0x15) [ 4.980414] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc600c0c0) ACPI=0x701f (54:54:0x15) [ 4.996283] ata2.00: configured for UDMA/33 [ 5.012465] ata2.01: configured for UDMA/33 [ 5.013731] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S222A SB02 PQ: 0 ANSI: 5 [ 5.017552] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.017556] Uniform CD-ROM driver Revision: 3.20 [ 5.017669] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.017742] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.020132] scsi 1:0:1:0: CD-ROM HP DVD Writer 300n 1.25 PQ: 0 ANSI: 5 [ 5.023698] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 5.023923] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 5.024071] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 5.418118] kjournald starting. Commit interval 5 seconds [ 5.418132] EXT3-fs: mounted filesystem with ordered data mode. [ 5.802090] ohci1394: fw-host0: SelfID received outside of bus reset sequence [ 6.072164] ieee1394: Host added: ID:BUS[0-00:1023] GUID[002724b800e01800] [ 19.336811] udev: starting version 151 [ 19.368147] Adding 2048276k swap on /dev/sda3. Priority:-1 extents:1 across:2048276k [ 19.470321] lp: driver loaded but no devices found [ 19.508761] i2c i2c-0: nForce2 SMBus adapter at 0x4300 [ 19.508793] i2c i2c-1: nForce2 SMBus adapter at 0x4340 [ 19.640996] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.651383] Linux agpgart interface v0.103 [ 19.794377] agpgart: Detected NVIDIA nForce2 chipset [ 19.862126] vga16fb: initializing [ 19.862133] vga16fb: mapped to 0xc00a0000 [ 19.862234] fb0: VGA16 VGA frame buffer device [ 19.915767] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xf4000000 [ 19.974002] EXT3 FS on sda2, internal journal [ 19.996560] parport_pc 00:06: reported by Plug and Play ACPI [ 19.996653] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 20.027444] type=1505 audit(1285409705.009:2): operation="profile_load" pid=518 name="/sbin/dhclient3" [ 20.027754] type=1505 audit(1285409705.009:3): operation="profile_load" pid=518 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 20.027920] type=1505 audit(1285409705.009:4): operation="profile_load" pid=518 name="/usr/lib/connman/scripts/dhclient-script" [ 20.092252] lp0: using parport0 (interrupt-driven). [ 20.096427] nvidia: module license 'NVIDIA' taints kernel. [ 20.096433] Disabling lock debugging due to kernel taint [ 20.545034] ppdev: user-space parallel port driver [ 21.013944] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20 [ 21.013951] Intel ICH 0000:00:06.0: PCI INT A -> Link[LAUI] -> GSI 20 (level, high) -> IRQ 20 [ 21.013990] Intel ICH 0000:00:06.0: setting latency timer to 64 [ 21.073929] Console: switching to colour frame buffer device 80x30 [ 21.087612] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16 [ 21.087620] alloc irq_desc for 16 on node -1 [ 21.087623] alloc kstat_irqs on node -1 [ 21.087632] nvidia 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, high) -> IRQ 16 [ 21.087642] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 21.089306] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.17 Thu Apr 15 05:28:41 PDT 2010 [ 21.388035] intel8x0_measure_ac97_clock: measured 53377 usecs (2592 samples) [ 21.388041] intel8x0: clocking to 47446 [ 36.104678] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended [ 37.922645] type=1505 audit(1285409722.905:5): operation="profile_load" pid=763 name="/usr/share/gdm/guest-session/Xsession" [ 37.927835] type=1505 audit(1285409722.909:6): operation="profile_replace" pid=766 name="/sbin/dhclient3" [ 37.930275] type=1505 audit(1285409722.913:7): operation="profile_replace" pid=766 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 37.930473] type=1505 audit(1285409722.913:8): operation="profile_replace" pid=766 name="/usr/lib/connman/scripts/dhclient-script" [ 37.965876] type=1505 audit(1285409722.949:9): operation="profile_load" pid=769 name="/usr/bin/evince" [ 37.984827] type=1505 audit(1285409722.969:10): operation="profile_load" pid=769 name="/usr/bin/evince-previewer" [ 37.987435] type=1505 audit(1285409722.969:11): operation="profile_load" pid=769 name="/usr/bin/evince-thumbnailer" [ 38.010333] type=1505 audit(1285409722.993:12): operation="profile_load" pid=773 name="/usr/lib/cups/backend/cups-pdf" [ 38.010723] type=1505 audit(1285409722.993:13): operation="profile_load" pid=773 name="/usr/sbin/cupsd" [ 38.016452] type=1505 audit(1285409723.001:14): operation="profile_load" pid=775 name="/usr/sbin/mysqld-akonadi" [ 38.248636] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge [ 38.248653] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode [ 38.248710] nvidia 0000:02:00.0: putting AGP V3 device into 8x mode