X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
Current Operating System: Linux ihs-ordinator 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=2868e6fb-dd53-477f-96a1-4362ae5cb264 ro quiet splash
Build Date: 21 July 2010  12:47:34PM
xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 11 15:14:10 2010
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(++) using VT number 7

(--) PCI:*(0:1:1:0) 10de:0221:196e:02f2 nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xdf000000/16777216, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 10de:01a0:1462:3678 nVidia Corporation NVCrush11 [GeForce2 MX Integrated Graphics] rev 177, Mem @ 0xdc000000/16777216, 0xd0000000/134217728, BIOS @ 0x????????/65536
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(==) AIGLX enabled
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.13.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
(==) Matched nouveau as autoconfigured driver 0
(==) Matched nv as autoconfigured driver 1
(==) Matched vesa as autoconfigured driver 2
(==) Matched fbdev as autoconfigured driver 3
(==) Assigned the driver to the xf86ConfigLayout
(II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 0.0.15
(II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
	compiled for 1.7.3.901, module version = 2.1.15
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 2.3.0
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 0.4.1
(II) NOUVEAU driver Date:   Wed Feb 10 18:43:39 2010 +0100
(II) NOUVEAU driver for NVIDIA chipset families :
	RIVA TNT    (NV04)
	RIVA TNT2   (NV05)
	GeForce 256 (NV10)
	GeForce 2   (NV11, NV15)
	GeForce 4MX (NV17, NV18)
	GeForce 3   (NV20)
	GeForce 4Ti (NV25, NV28)
	GeForce FX  (NV3x)
	GeForce 6   (NV4x)
	GeForce 7   (G7x)
	GeForce 8   (G8x)
(II) NOUVEAU driver Date:   Wed Feb 10 18:43:39 2010 +0100
(II) NOUVEAU driver for NVIDIA chipset families :
	RIVA TNT    (NV04)
	RIVA TNT2   (NV05)
	GeForce 256 (NV10)
	GeForce 2   (NV11, NV15)
	GeForce 4MX (NV17, NV18)
	GeForce 3   (NV20)
	GeForce 4Ti (NV25, NV28)
	GeForce FX  (NV3x)
	GeForce 6   (NV4x)
	GeForce 7   (G7x)
	GeForce 8   (G8x)
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) [drm] nouveau interface version: 0.0.15
(EE) [drm] KMS not enabled
(WW) Falling back to old probe method for fbdev
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 0.0.2
(EE) open /dev/fb0: No such file or directory
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
(==) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): Manufacturer: CPQ  Model: 3017  Serial#: 1160917042
(II) VESA(0): Year: 1999  Week: 9
(II) VESA(0): EDID Version: 1.1
(II) VESA(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) VESA(0): Sync:  Separate
(II) VESA(0): Max Image Size [cm]: horiz.: 36  vert.: 27
(II) VESA(0): Gamma: 2.76
(II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) VESA(0): redX: 0.625 redY: 0.340   greenX: 0.285 greenY: 0.605
(II) VESA(0): blueX: 0.150 blueY: 0.065   whiteX: 0.281 whiteY: 0.311
(II) VESA(0): Supported established timings:
(II) VESA(0): 720x400@70Hz
(II) VESA(0): 640x480@60Hz
(II) VESA(0): 800x600@75Hz
(II) VESA(0): 1024x768@70Hz
(II) VESA(0): 1024x768@75Hz
(II) VESA(0): 1280x1024@75Hz
(II) VESA(0): Manufacturer's mask: 0
(II) VESA(0): Supported standard timings:
(II) VESA(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) VESA(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) VESA(0): #2: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) VESA(0): #3: hsize: 1280  vsize 1024  refresh: 85  vid: 39297
(II) VESA(0): #4: hsize: 1600  vsize 1200  refresh: 75  vid: 20393
(II) VESA(0): Supported detailed timing:
(II) VESA(0): clock: 25.2 MHz   Image Size:  350 x 262 mm
(II) VESA(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 8
(II) VESA(0): v_active: 480  v_sync: 491  v_sync_end 493 v_blanking: 525 v_border: 8
(II) VESA(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 95 kHz,
(II) VESA(0): Serial No: 909GA19EE202
(II) VESA(0): Monitor name: COMPAQ MV900
(II) VESA(0): Number of EDID sections to follow: 32
(II) VESA(0): EDID (in hex):
(II) VESA(0): 	00ffffffffffff000e11173032303245
(II) VESA(0): 	0909010168241bb0e800b2a057499b26
(II) VESA(0): 	10484fa047003159455961598199a94f
(II) VESA(0): 	010101010101d50980a020e02d101060
(II) VESA(0): 	b2005e0611080818000000fd0032a01e
(II) VESA(0): 	5fff000a202020202020000000ff0039
(II) VESA(0): 	30394741313945453230320a000000fc
(II) VESA(0): 	00434f4d504151204d563930300a202c
(II) VESA(0): EDID vendor "CPQ", prod id 12311
(II) VESA(0): Using EDID range info for horizontal sync
(II) VESA(0): Using EDID range info for vertical refresh
(II) VESA(0): Printing DDC gathered Modelines:
(II) VESA(0): Modeline "640x480"x0.0   25.17  640 656 752 800  480 491 493 525 -hsync -vsync (31.5 kHz)
(II) VESA(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) VESA(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) VESA(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) VESA(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) VESA(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) VESA(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) VESA(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) VESA(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) VESA(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) VESA(0): Modeline "1280x1024"x0.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) VESA(0): Modeline "1600x1200"x0.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) VESA(0): <default monitor>: Using hsync range of 30.00-95.00 kHz
(II) VESA(0): <default monitor>: Using vrefresh range of 50.00-160.00 Hz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "2048x1536" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x400" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x400" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x240" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x200" (no mode of this name)
(--) VESA(0): Virtual size is 1280x1024 (pitch 1280)
(**) VESA(0): *Built-in mode "1280x1024"
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(**) VESA(0): Display dimensions: (360, 270) mm
(**) VESA(0): DPI set to (90, 96)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
(II) Unloading /usr/lib/xorg/modules/drivers/nv_drv.so
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): Setting up VESA Mode 0x11B (1280x1024)
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) VESA(0): DPMS enabled
(==) RandR enabled
(II) Found 2 VGA devices: arbiter wrapping enabled
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 2.3.2
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(II) config/udev: Adding input device ATEN UC-10KM V1.3.121 (/dev/input/event3)
(**) ATEN UC-10KM V1.3.121: Applying InputClass "evdev keyboard catchall"
(**) ATEN UC-10KM V1.3.121: always reports core events
(**) ATEN UC-10KM V1.3.121: Device: "/dev/input/event3"
(II) ATEN UC-10KM V1.3.121: Found keys
(II) ATEN UC-10KM V1.3.121: Configuring as keyboard
(II) XINPUT: Adding extended input device "ATEN UC-10KM V1.3.121" (type: KEYBOARD)
(II) config/udev: Adding input device ATEN UC-10KM V1.3.121 (/dev/input/event4)
(**) ATEN UC-10KM V1.3.121: Applying InputClass "evdev pointer catchall"
(**) ATEN UC-10KM V1.3.121: always reports core events
(**) ATEN UC-10KM V1.3.121: Device: "/dev/input/event4"
(II) ATEN UC-10KM V1.3.121: Found 9 mouse buttons
(II) ATEN UC-10KM V1.3.121: Found scroll wheel(s)
(II) ATEN UC-10KM V1.3.121: Found relative axes
(II) ATEN UC-10KM V1.3.121: Found x and y relative axes
(II) ATEN UC-10KM V1.3.121: Configuring as mouse
(**) ATEN UC-10KM V1.3.121: YAxisMapping: buttons 4 and 5
(**) ATEN UC-10KM V1.3.121: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ATEN UC-10KM V1.3.121" (type: MOUSE)
(II) ATEN UC-10KM V1.3.121: initialized for relative axes.
(II) config/udev: Adding input device ATEN UC-10KM V1.3.121 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) VESA(0): Setting up VESA Mode 0x115 (800x600)
(II) VESA(0): Setting up VESA Mode 0x11B (1280x1024)