[ 0.000000] Linux version 4.15.0-10-generic (buildd@lgw01-amd64-036) (gcc version 7.3.0 (Ubuntu 7.3.0-3ubuntu1)) #11-Ubuntu SMP Tue Feb 13 18:23:35 UTC 2018 (Ubuntu 4.15.0-10.11-generic 4.15.3) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz root=/dev/sdb5 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x1d3/0x220 with crng_init=0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfdf3000-0x00000000cfdfffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3/GA-78LMT-USB3, BIOS FA 04/23/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000022f000000 aka 8944M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 3326M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5ed0-0x000f5edf] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x1aa33e000, 0x1aa33efff] PGTABLE [ 0.000000] BRK [0x1aa33f000, 0x1aa33ffff] PGTABLE [ 0.000000] BRK [0x1aa340000, 0x1aa340fff] PGTABLE [ 0.000000] BRK [0x1aa341000, 0x1aa341fff] PGTABLE [ 0.000000] BRK [0x1aa342000, 0x1aa342fff] PGTABLE [ 0.000000] BRK [0x1aa343000, 0x1aa343fff] PGTABLE [ 0.000000] BRK [0x1aa344000, 0x1aa344fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3135e000-0x349a6fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F78E0 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000CFDF3000 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000CFDF3080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000CFDF3100 00683B (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0x00000000CFDF0000 000040 [ 0.000000] ACPI: MSDM 0x00000000CFDF9A00 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: HPET 0x00000000CFDF9A80 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000CFDF9AC0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 0x00000000CFDF9B00 000022 (v01 GBT GBT B0 5455312E BG?? 00000101) [ 0.000000] ACPI: APIC 0x00000000CFDF9940 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x00000000CFDF9BA0 000B9C (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22efd5000-0x22effffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000022effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfdeffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff] [ 0.000000] On node 0 totalpages: 2092430 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13240 pages used for memmap [ 0.000000] DMA32 zone: 847344 pages, LIFO batch:31 [ 0.000000] Normal zone: 19392 pages used for memmap [ 0.000000] Normal zone: 1241088 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfdf0000-0xcfdf2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfdf3000-0xcfdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2059713 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=/dev/sdb5 [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB) [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.000000] Memory: 8021840K/8369720K available (12300K kernel code, 2470K rwdata, 4220K rodata, 2404K init, 2416K bss, 347880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 39134 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 4017.931 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 8035.86 BogoMIPS (lpj=16071724) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028206] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.028342] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.028461] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.028780] CPU: Physical Processor ID: 0 [ 0.028857] CPU: Processor Core ID: 0 [ 0.028932] mce: CPU supports 7 MCE banks [ 0.029013] LVT offset 1 assigned for vector 0xf9 [ 0.029095] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.029177] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.029261] Spectre V2 : Mitigation: Full AMD retpoline [ 0.029340] Spectre V2 : Filling RSB on context switch [ 0.030128] Freeing SMP alternatives memory: 36K [ 0.036000] smpboot: CPU0: AMD FX(tm)-4300 Quad-Core Processor (family: 0x15, model: 0x2, stepping: 0x0) [ 0.036000] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.036000] ... version: 0 [ 0.036000] ... bit width: 48 [ 0.036000] ... generic registers: 6 [ 0.036000] ... value mask: 0000ffffffffffff [ 0.036000] ... max period: 00007fffffffffff [ 0.036000] ... fixed-purpose events: 0 [ 0.036000] ... event mask: 000000000000003f [ 0.036000] Hierarchical SRCU implementation. [ 0.036000] smp: Bringing up secondary CPUs ... [ 0.036000] x86: Booting SMP configuration: [ 0.036000] .... node #0, CPUs: #1 [ 0.004000] do_IRQ: 1.55 No irq handler for vector [ 0.036180] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.036279] #2 [ 0.004000] do_IRQ: 2.55 No irq handler for vector [ 0.038458] #3 [ 0.004000] do_IRQ: 3.55 No irq handler for vector [ 0.040057] smp: Brought up 1 node, 4 CPUs [ 0.040079] smpboot: Max logical packages: 2 [ 0.040156] smpboot: Total of 4 processors activated (32143.44 BogoMIPS) [ 0.044390] devtmpfs: initialized [ 0.044390] x86/mm: Memory block size: 128MB [ 0.044905] evm: security.selinux [ 0.044979] evm: security.SMACK64 [ 0.045053] evm: security.SMACK64EXEC [ 0.045127] evm: security.SMACK64TRANSMUTE [ 0.045203] evm: security.SMACK64MMAP [ 0.045278] evm: security.apparmor [ 0.045351] evm: security.ima [ 0.045424] evm: security.capability [ 0.045516] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes) [ 0.048058] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.048139] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.048314] pinctrl core: initialized pinctrl subsystem [ 0.048489] RTC time: 4:42:47, date: 03/04/18 [ 0.048665] NET: Registered protocol family 16 [ 0.048812] audit: initializing netlink subsys (disabled) [ 0.048899] audit: type=2000 audit(1520138567.048:1): state=initialized audit_enabled=0 res=1 [ 0.048899] cpuidle: using governor ladder [ 0.048899] cpuidle: using governor menu [ 0.048899] ACPI: bus type PCI registered [ 0.048899] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.048899] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.048899] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.048899] PCI: Using configuration type 1 for base access [ 0.052103] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.052103] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.052202] ACPI: Added _OSI(Module Device) [ 0.052202] ACPI: Added _OSI(Processor Device) [ 0.052229] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052307] ACPI: Added _OSI(Processor Aggregator Device) [ 0.054512] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381) [ 0.054638] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381) [ 0.054764] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381) [ 0.054889] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381) [ 0.055069] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381) [ 0.055194] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381) [ 0.055319] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381) [ 0.056012] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381) [ 0.056191] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381) [ 0.056317] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381) [ 0.056443] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381) [ 0.056568] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381) [ 0.056750] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381) [ 0.056875] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381) [ 0.057000] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381) [ 0.057125] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381) [ 0.057304] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381) [ 0.057430] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381) [ 0.057555] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381) [ 0.057680] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381) [ 0.057859] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381) [ 0.057985] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381) [ 0.058109] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381) [ 0.058234] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381) [ 0.058417] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381) [ 0.058543] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381) [ 0.058668] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381) [ 0.058792] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381) [ 0.058973] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381) [ 0.059098] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381) [ 0.059222] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381) [ 0.059347] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381) [ 0.059526] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381) [ 0.059651] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381) [ 0.059776] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381) [ 0.059902] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381) [ 0.060063] ACPI Exception: Could not find/resolve named package element: LNKA (20170831/dspkginit-381) [ 0.060188] ACPI Exception: Could not find/resolve named package element: LNKB (20170831/dspkginit-381) [ 0.060313] ACPI Exception: Could not find/resolve named package element: LNKC (20170831/dspkginit-381) [ 0.060439] ACPI Exception: Could not find/resolve named package element: LNKD (20170831/dspkginit-381) [ 0.064136] ACPI: Interpreter enabled [ 0.064234] ACPI: (supports S0 S3 S4 S5) [ 0.064310] ACPI: Using IOAPIC for interrupt routing [ 0.064472] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.064741] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.070779] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.070866] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.070983] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.071357] PCI host bridge to bus 0000:00 [ 0.071435] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.071521] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.071606] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.071717] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.071828] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] [ 0.071939] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.072011] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 [ 0.072023] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 0.072231] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.072249] pci 0000:00:02.0: enabling Extended Tags [ 0.072349] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.072433] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 [ 0.072450] pci 0000:00:04.0: enabling Extended Tags [ 0.072550] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.072633] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 [ 0.072650] pci 0000:00:06.0: enabling Extended Tags [ 0.072750] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.072852] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.072872] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 0.072881] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.072890] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.072898] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.072906] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.072915] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff] [ 0.072935] pci 0000:00:11.0: set SATA to AHCI mode [ 0.073117] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.073133] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff] [ 0.073264] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.073281] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff] [ 0.073415] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.073435] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff] [ 0.073511] pci 0000:00:12.2: supports D1 D2 [ 0.073512] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.073599] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.073615] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff] [ 0.073745] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.073761] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff] [ 0.073895] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.073914] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff] [ 0.073990] pci 0000:00:13.2: supports D1 D2 [ 0.073992] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.074079] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.074238] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.074256] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.074264] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.074273] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.074281] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.074289] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f] [ 0.074308] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.074396] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.074480] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.074566] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.074749] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.074772] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.074835] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.074914] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.075058] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.075172] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.075189] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff] [ 0.075322] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.075401] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.075476] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.075552] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.075631] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.075705] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.075821] pci 0000:01:00.0: [10de:1200] type 00 class 0x030000 [ 0.075837] pci 0000:01:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff] [ 0.075846] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref] [ 0.075856] pci 0000:01:00.0: reg 0x1c: [mem 0xdc000000-0xdfffffff 64bit pref] [ 0.075862] pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f] [ 0.075868] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.075874] pci 0000:01:00.0: enabling Extended Tags [ 0.076056] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300 [ 0.076070] pci 0000:01:00.1: reg 0x10: [mem 0xfbffc000-0xfbffffff] [ 0.076106] pci 0000:01:00.1: enabling Extended Tags [ 0.088020] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.088102] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.088104] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.088107] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.088147] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.088163] pci 0000:02:00.0: reg 0x10: [mem 0xfdaff000-0xfdafffff 64bit] [ 0.088221] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.100014] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.100096] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.100098] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.100101] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.100144] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.100165] pci 0000:03:00.0: reg 0x10: [io 0xce00-0xceff] [ 0.100184] pci 0000:03:00.0: reg 0x18: [mem 0xfddff000-0xfddfffff 64bit pref] [ 0.100196] pci 0000:03:00.0: reg 0x20: [mem 0xfddf8000-0xfddfbfff 64bit pref] [ 0.100263] pci 0000:03:00.0: supports D1 D2 [ 0.100265] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.112017] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.112099] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] [ 0.112101] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.112104] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.112178] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.112265] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.112268] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.112271] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.112273] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.112274] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.112275] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.112276] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.112277] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode) [ 0.112574] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.112744] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.112912] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.113079] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.113246] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.113413] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.113580] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.113747] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.114679] SCSI subsystem initialized [ 0.114768] libata version 3.00 loaded. [ 0.114768] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.114768] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.114768] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.114768] vgaarb: loaded [ 0.114768] ACPI: bus type USB registered [ 0.114768] usbcore: registered new interface driver usbfs [ 0.114768] usbcore: registered new interface driver hub [ 0.114768] usbcore: registered new device driver usb [ 0.114768] EDAC MC: Ver: 3.0.0 [ 0.114768] PCI: Using ACPI for IRQ routing [ 0.121122] PCI: pci_cache_line_size set to 64 bytes [ 0.121173] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.121174] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff] [ 0.121175] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff] [ 0.121259] NetLabel: Initializing [ 0.121333] NetLabel: domain hash size = 128 [ 0.121410] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.121502] NetLabel: unlabeled traffic allowed by default [ 0.124026] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.124108] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.126241] clocksource: Switched to clocksource hpet [ 0.136483] VFS: Disk quotas dquot_6.6.0 [ 0.136576] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.136769] AppArmor: AppArmor Filesystem Enabled [ 0.136873] pnp: PnP ACPI init [ 0.137077] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.137160] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.138766] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.138853] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.139166] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.139316] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.139399] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.139482] system 00:01: [io 0x040b] has been reserved [ 0.139562] system 00:01: [io 0x04d6] has been reserved [ 0.139643] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.139725] system 00:01: [io 0x0c14] has been reserved [ 0.139805] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.139888] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.139970] system 00:01: [io 0x0c6f] has been reserved [ 0.140060] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.140143] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.140225] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.140308] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.140390] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.140472] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.140555] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.140637] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.140720] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.140832] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.141012] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.141186] pnp 00:03: [dma 2] [ 0.141209] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.141452] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.141711] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.141839] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.141899] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.141987] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.142219] system 00:08: [mem 0x000cdc00-0x000cffff] has been reserved [ 0.142305] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.142391] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.142476] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.142562] system 00:08: [mem 0xcfdf0000-0xcfdfffff] could not be reserved [ 0.142648] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved [ 0.142733] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.142818] system 00:08: [mem 0x00100000-0xcfdeffff] could not be reserved [ 0.142904] system 00:08: [mem 0xcfe00000-0xcfefffff] has been reserved [ 0.142988] system 00:08: [mem 0xcff00000-0xcfffffff] could not be reserved [ 0.143074] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.143160] system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.143246] system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.143332] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.143352] pnp: PnP ACPI: found 9 devices [ 0.149977] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.150113] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa07ffff pref] [ 0.150224] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.150304] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.150389] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.150474] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.150587] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.150667] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.150750] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.150836] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.150949] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.151028] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] [ 0.151112] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.151197] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.151310] pci 0000:00:14.4: PCI bridge to [bus 04] [ 0.151390] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.151476] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.151563] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.151677] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.151678] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.151680] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.151681] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.151682] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff window] [ 0.151683] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.151684] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.151685] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.151687] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.151688] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.151689] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.151690] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.151691] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.151692] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.151693] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.151694] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.151695] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref] [ 0.151697] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.151698] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.151699] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.151700] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.151701] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff window] [ 0.151762] NET: Registered protocol family 2 [ 0.152069] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.152346] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.152694] TCP: Hash tables configured (established 65536 bind 65536) [ 0.152832] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.152953] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.153108] NET: Registered protocol family 1 [ 0.552192] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.552477] PCI: CLS 64 bytes, default 64 [ 0.552524] Unpacking initramfs... [ 1.242240] Freeing initrd memory: 55588K [ 1.242975] PCI-DMA: Disabling AGP. [ 1.243111] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.243192] PCI-DMA: using GART IOMMU. [ 1.243268] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.246437] amd_uncore: AMD NB counters detected [ 1.246622] LVT offset 0 assigned for vector 0x400 [ 1.246745] perf: AMD IBS detected (0x000000ff) [ 1.246893] Scanning for low memory corruption every 60 seconds [ 1.247561] Initialise system trusted keyrings [ 1.247646] Key type blacklist registered [ 1.247761] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.248957] zbud: loaded [ 1.249416] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.249645] fuse init (API version 7.26) [ 1.251237] Key type asymmetric registered [ 1.251313] Asymmetric key parser 'x509' registered [ 1.251415] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.251566] io scheduler noop registered [ 1.251643] io scheduler deadline registered [ 1.251757] io scheduler cfq registered (default) [ 1.252527] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.252648] ACPI: Power Button [PWRB] [ 1.252761] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.252904] ACPI: Power Button [PWRF] [ 1.253382] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.274004] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.276086] Linux agpgart interface v0.103 [ 1.277602] loop: module loaded [ 1.277917] libphy: Fixed MDIO Bus: probed [ 1.277994] tun: Universal TUN/TAP device driver, 1.6 [ 1.278106] PPP generic driver version 2.4.2 [ 1.278220] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.278305] ehci-pci: EHCI PCI platform driver [ 1.278538] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.278625] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.278738] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.278864] ehci-pci 0000:00:12.2: debug port 1 [ 1.278985] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 1.296100] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.296299] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.296386] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.296497] usb usb1: Product: EHCI Host Controller [ 1.296576] usb usb1: Manufacturer: Linux 4.15.0-10-generic ehci_hcd [ 1.296659] usb usb1: SerialNumber: 0000:00:12.2 [ 1.296898] hub 1-0:1.0: USB hub found [ 1.296979] hub 1-0:1.0: 6 ports detected [ 1.297353] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.297436] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.297548] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.297671] ehci-pci 0000:00:13.2: debug port 1 [ 1.297787] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000 [ 1.312101] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.312282] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.312377] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.312487] usb usb2: Product: EHCI Host Controller [ 1.312566] usb usb2: Manufacturer: Linux 4.15.0-10-generic ehci_hcd [ 1.312650] usb usb2: SerialNumber: 0000:00:13.2 [ 1.312847] hub 2-0:1.0: USB hub found [ 1.312927] hub 2-0:1.0: 6 ports detected [ 1.313146] ehci-platform: EHCI generic platform driver [ 1.313237] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.313322] ohci-pci: OHCI PCI platform driver [ 1.313532] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.313617] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.313758] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.376119] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.376206] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.376316] usb usb3: Product: OHCI PCI host controller [ 1.376396] usb usb3: Manufacturer: Linux 4.15.0-10-generic ohci_hcd [ 1.376479] usb usb3: SerialNumber: 0000:00:12.0 [ 1.376743] hub 3-0:1.0: USB hub found [ 1.376825] hub 3-0:1.0: 3 ports detected [ 1.377129] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.377215] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.377341] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.440054] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.440141] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.440252] usb usb4: Product: OHCI PCI host controller [ 1.440332] usb usb4: Manufacturer: Linux 4.15.0-10-generic ohci_hcd [ 1.440415] usb usb4: SerialNumber: 0000:00:12.1 [ 1.440677] hub 4-0:1.0: USB hub found [ 1.440759] hub 4-0:1.0: 3 ports detected [ 1.441066] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.441151] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.441290] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.504119] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.504205] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.504315] usb usb5: Product: OHCI PCI host controller [ 1.504395] usb usb5: Manufacturer: Linux 4.15.0-10-generic ohci_hcd [ 1.504479] usb usb5: SerialNumber: 0000:00:13.0 [ 1.504742] hub 5-0:1.0: USB hub found [ 1.506356] hub 5-0:1.0: 3 ports detected [ 1.506741] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.506826] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.506951] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 1.568119] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.568206] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.568316] usb usb6: Product: OHCI PCI host controller [ 1.568396] usb usb6: Manufacturer: Linux 4.15.0-10-generic ohci_hcd [ 1.568479] usb usb6: SerialNumber: 0000:00:13.1 [ 1.568743] hub 6-0:1.0: USB hub found [ 1.568825] hub 6-0:1.0: 3 ports detected [ 1.569131] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.569216] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.569341] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000 [ 1.632118] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.632205] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.632314] usb usb7: Product: OHCI PCI host controller [ 1.632394] usb usb7: Manufacturer: Linux 4.15.0-10-generic ohci_hcd [ 1.632478] usb usb7: SerialNumber: 0000:00:14.5 [ 1.632742] hub 7-0:1.0: USB hub found [ 1.632827] hub 7-0:1.0: 2 ports detected [ 1.633001] ohci-platform: OHCI generic platform driver [ 1.633090] uhci_hcd: USB Universal Host Controller Interface driver [ 1.633264] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.633349] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 1.633539] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090 [ 1.633758] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.633843] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.633955] usb usb8: Product: xHCI Host Controller [ 1.634040] usb usb8: Manufacturer: Linux 4.15.0-10-generic xhci-hcd [ 1.634123] usb usb8: SerialNumber: 0000:02:00.0 [ 1.634376] hub 8-0:1.0: USB hub found [ 1.634457] hub 8-0:1.0: 1 port detected [ 1.634591] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.634673] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 1.634796] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.634934] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.635019] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.635129] usb usb9: Product: xHCI Host Controller [ 1.635208] usb usb9: Manufacturer: Linux 4.15.0-10-generic xhci-hcd [ 1.635292] usb usb9: SerialNumber: 0000:02:00.0 [ 1.635509] hub 9-0:1.0: USB hub found [ 1.635590] hub 9-0:1.0: 4 ports detected [ 1.635802] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.635888] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.636165] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.636333] mousedev: PS/2 mouse device common for all mice [ 1.636559] rtc_cmos 00:02: RTC can wake from S4 [ 1.636741] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.636854] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.636969] i2c /dev entries driver [ 1.637082] device-mapper: uevent: version 1.0.3 [ 1.637225] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.637410] ledtrig-cpu: registered to indicate activity on CPUs [ 1.637850] NET: Registered protocol family 10 [ 1.641183] Segment Routing with IPv6 [ 1.641275] NET: Registered protocol family 17 [ 1.641397] Key type dns_resolver registered [ 1.641682] RAS: Correctable Errors collector initialized. [ 1.641904] microcode: CPU0: patch_level=0x0600081c [ 1.641991] microcode: CPU1: patch_level=0x0600081c [ 1.642077] microcode: CPU2: patch_level=0x0600081c [ 1.642165] microcode: CPU3: patch_level=0x0600081c [ 1.642282] microcode: Microcode Update Driver: v2.2. [ 1.642289] sched_clock: Marking stable (1642277881, 0)->(1756768578, -114490697) [ 1.642694] registered taskstats version 1 [ 1.642777] Loading compiled-in X.509 certificates [ 1.644809] Loaded X.509 cert 'Build time autogenerated kernel key: cfb5ef05dbf6c6d52c0a9007e2f0645cc1173f6d' [ 1.644952] zswap: loaded using pool lzo/zbud [ 1.647657] Key type big_key registered [ 1.647736] Key type trusted registered [ 1.649123] Key type encrypted registered [ 1.649203] AppArmor: AppArmor sha1 policy hashing enabled [ 1.649285] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.649388] evm: HMAC attrs: 0x1 [ 1.649729] Magic number: 10:386:716 [ 1.649897] rtc_cmos 00:02: setting system clock to 2018-03-04 04:42:49 UTC (1520138569) [ 1.650168] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.650399] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.650481] EDD information not available. [ 1.653626] Freeing unused kernel memory: 2404K [ 1.653704] Write protecting the kernel read-only data: 20480k [ 1.654596] Freeing unused kernel memory: 2008K [ 1.658616] Freeing unused kernel memory: 1924K [ 1.665366] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.675420] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.728363] Floppy drive(s): fd0 is unknown type 13 (usb?) [ 1.739781] ahci 0000:00:11.0: version 3.0 [ 1.740074] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.740192] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.744119] scsi host0: ahci [ 1.744772] scsi host1: ahci [ 1.746705] scsi host2: ahci [ 1.747045] scsi host3: ahci [ 1.747168] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.747281] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.747393] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.747506] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.751841] FDC 0 is a post-1991 82077 [ 1.760747] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.760848] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.761496] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0x00000000c77c0a93, 74:d4:35:ba:2a:35, XID 0c900800 IRQ 25 [ 1.761618] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.768034] scsi host4: pata_atiixp [ 1.772348] scsi host5: pata_atiixp [ 1.772473] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.772562] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.774210] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 1.774314] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170831/utaddress-247) [ 1.774481] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.794609] nouveau 0000:01:00.0: NVIDIA GF114 (0ce000a1) [ 1.935918] nouveau 0000:01:00.0: bios: version 70.24.11.00.01 [ 1.959255] nouveau 0000:01:00.0: fb: 1024 MiB GDDR5 [ 1.965161] nouveau 0000:01:00.0: iccsense: found invalid sensor id: 1, power readingmight be invalid [ 1.966264] nouveau 0000:01:00.0: iccsense: found invalid sensor id: 2, power readingmight be invalid [ 1.967367] nouveau 0000:01:00.0: iccsense: found invalid sensor id: 3, power readingmight be invalid [ 2.015616] [TTM] Zone kernel: Available graphics memory: 4074876 kiB [ 2.015701] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 2.015784] [TTM] Initializing pool allocator [ 2.015864] [TTM] Initializing DMA pool allocator [ 2.015952] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB [ 2.016040] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 2.016122] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 2.016204] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 2.016284] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000 [ 2.016368] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030 [ 2.016452] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011380 00000000 [ 2.016538] nouveau 0000:01:00.0: DRM: DCB outp 03: 08011382 00020030 [ 2.016628] nouveau 0000:01:00.0: DRM: DCB outp 04: 02022362 00020010 [ 2.016712] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 2.016797] nouveau 0000:01:00.0: DRM: DCB conn 01: 00010130 [ 2.016880] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261 [ 2.019733] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.019818] [drm] Driver supports precise vblank timestamp query. [ 2.020809] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies [ 2.064024] usb 8-1: new high-speed USB device number 2 using xhci_hcd [ 2.144790] usb 6-1: new low-speed USB device number 2 using ohci-pci [ 2.145533] nouveau 0000:01:00.0: DRM: allocated 1600x900 fb: 0x60000, bo 000000008140cbb3 [ 2.157150] fbcon: nouveaufb (fb0) is primary device [ 2.213169] usb 8-1: New USB device found, idVendor=2109, idProduct=3431 [ 2.213170] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.213171] usb 8-1: Product: USB2.0 Hub [ 2.213607] hub 8-1:1.0: USB hub found [ 2.213706] hub 8-1:1.0: 4 ports detected [ 2.220014] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.220091] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.220127] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.220381] ata1.00: ATA-11: KINGSTON SUV400S37120G, 0C3FD6SD, max UDMA/133 [ 2.220382] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.220746] ata1.00: configured for UDMA/133 [ 2.220908] scsi 0:0:0:0: Direct-Access ATA KINGSTON SUV400S D6SD PQ: 0 ANSI: 5 [ 2.221198] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.221200] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.221213] sd 0:0:0:0: [sda] Write Protect is off [ 2.221215] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.221235] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.221238] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.221780] sda: sda1 [ 2.221819] ata4.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133 [ 2.221820] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.222478] ata3.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133 [ 2.222480] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.222673] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.224009] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.224124] ata4.00: configured for UDMA/133 [ 2.224524] ata2.00: ATA-9: WDC WD20EZRZ-00Z5HB0, 80.00A80, max UDMA/133 [ 2.224525] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.224583] ata3.00: configured for UDMA/133 [ 2.225081] ata2.00: configured for UDMA/133 [ 2.225219] scsi 1:0:0:0: Direct-Access ATA WDC WD20EZRZ-00Z 0A80 PQ: 0 ANSI: 5 [ 2.225397] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.225555] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5 [ 2.225611] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.225613] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.225626] sd 1:0:0:0: [sdb] Write Protect is off [ 2.225628] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.225654] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.225738] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.225746] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.225759] sd 2:0:0:0: [sdc] Write Protect is off [ 2.225760] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.225780] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.225912] scsi 3:0:0:0: Direct-Access ATA WDC WD10EADS-00M 0A01 PQ: 0 ANSI: 5 [ 2.226074] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 2.226193] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.226206] sd 3:0:0:0: [sdd] Write Protect is off [ 2.226208] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.226230] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.243863] sdc: sdc1 sdc2 [ 2.244235] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.250223] sdd: sdd1 [ 2.250567] sd 3:0:0:0: [sdd] Attached SCSI disk [ 2.268002] tsc: Refined TSC clocksource calibration: 4017.769 MHz [ 2.268009] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39e9eef8e96, max_idle_ns: 440795403011 ns [ 2.272926] sdb: sdb1 sdb2 sdb3 < sdb5 > sdb4 [ 2.273349] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.274834] Console: switching to colour frame buffer device 200x56 [ 2.338380] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 2.356096] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 2.381160] usb 6-1: New USB device found, idVendor=046d, idProduct=c408 [ 2.381389] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.383191] usb 6-1: Product: USB Trackball [ 2.385273] usb 6-1: Manufacturer: Logitech [ 2.391067] hidraw: raw HID events driver (C) Jiri Kosina [ 2.398232] usbcore: registered new interface driver usbhid [ 2.398451] usbhid: USB HID core driver [ 2.402075] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/0003:046D:C408.0001/input/input3 [ 2.402686] hid-generic 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:13.1-1/input0 [ 2.874931] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) [ 3.292148] clocksource: Switched to clocksource tsc [ 3.725754] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.757033] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.776205] systemd[1]: Detected architecture x86-64. [ 3.789090] systemd[1]: Set hostname to . [ 3.961154] random: crng init done [ 5.033962] systemd[1]: Reached target Remote File Systems. [ 5.036807] systemd[1]: Created slice User and Session Slice. [ 5.041778] systemd[1]: Created slice System Slice. [ 5.046672] systemd[1]: Listening on LVM2 poll daemon socket. [ 5.051650] systemd[1]: Listening on Journal Socket. [ 5.057155] systemd[1]: Mounting Huge Pages File System... [ 5.062047] systemd[1]: Mounting Kernel Debug File System... [ 5.415321] lp: driver loaded but no devices found [ 5.419915] ppdev: user-space parallel port driver [ 5.518470] parport_pc 00:05: reported by Plug and Play ACPI [ 5.518730] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 5.585128] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro [ 5.616070] lp0: using parport0 (interrupt-driven). [ 5.742798] systemd-journald[344]: Received request to flush runtime journal from PID 1 [ 5.974380] it87: Found IT8728F chip at 0x228, revision 1 [ 5.974573] it87: Beeping is supported [ 7.056013] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.649985] AVX version of gcm_enc/dec engaged. [ 7.649987] AES CTR mode by8 optimization enabled [ 7.705304] snd_hda_intel 0000:01:00.1: Disabling MSI [ 7.705311] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 7.821563] snd_hda_codec_via hdaudioC0D0: autoconfig for VT2020: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:line [ 7.821565] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.821567] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0) [ 7.821568] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0 [ 7.821569] snd_hda_codec_via hdaudioC0D0: dig-out=0x2e/0x0 [ 7.821579] snd_hda_codec_via hdaudioC0D0: inputs: [ 7.821581] snd_hda_codec_via hdaudioC0D0: Front Mic=0x29 [ 7.821582] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x2b [ 7.821583] snd_hda_codec_via hdaudioC0D0: Line=0x2a [ 7.829891] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 7.829937] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 7.829980] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 7.830025] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 7.830070] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 8.234300] kvm: Nested Virtualization enabled [ 8.234302] kvm: Nested Paging enabled [ 8.258334] MCE: In-kernel MCE decoding enabled. [ 8.279799] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.279801] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.332424] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.332425] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.384327] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.384329] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.749657] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended [ 8.764123] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 8.779725] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 9.002330] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9 [ 9.002409] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 9.002484] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 9.002564] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 9.118727] Adding 2049020k swap on /dev/sdb1. Priority:-2 extents:1 across:2049020k FS [ 9.515991] raid6: sse2x1 gen() 5907 MB/s [ 9.563995] raid6: sse2x1 xor() 4215 MB/s [ 9.611995] raid6: sse2x2 gen() 10133 MB/s [ 9.659990] raid6: sse2x2 xor() 6725 MB/s [ 9.707991] raid6: sse2x4 gen() 12309 MB/s [ 9.755981] raid6: sse2x4 xor() 6138 MB/s [ 9.755983] raid6: using algorithm sse2x4 gen() 12309 MB/s [ 9.755983] raid6: .... xor() 6138 MB/s, rmw enabled [ 9.755984] raid6: using ssse3x2 recovery algorithm [ 9.780616] xor: automatically using best checksumming function avx [ 9.816027] Btrfs loaded, crc32c=crc32c-intel [ 9.816606] BTRFS: device fsid 58cbfab3-ac4a-4c58-a9ed-467d176dbc83 devid 1 transid 17724 /dev/sdb4 [ 9.897477] BTRFS info (device sdb4): disk space caching is enabled [ 9.897479] BTRFS info (device sdb4): has skinny extents [ 11.583177] audit: type=1400 audit(1520138579.426:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=770 comm="apparmor_parser" [ 11.583182] audit: type=1400 audit(1520138579.426:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=770 comm="apparmor_parser" [ 11.583185] audit: type=1400 audit(1520138579.426:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=770 comm="apparmor_parser" [ 11.594959] audit: type=1400 audit(1520138579.438:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=771 comm="apparmor_parser" [ 11.622124] audit: type=1400 audit(1520138579.466:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4110/usr/lib/snapd/snap-confine" pid=768 comm="apparmor_parser" [ 11.622127] audit: type=1400 audit(1520138579.466:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4110/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=768 comm="apparmor_parser" [ 11.622129] audit: type=1400 audit(1520138579.466:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4110/usr/lib/snapd/snap-confine//snap_update_ns" pid=768 comm="apparmor_parser" [ 11.623502] audit: type=1400 audit(1520138579.466:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=767 comm="apparmor_parser" [ 11.623505] audit: type=1400 audit(1520138579.466:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=767 comm="apparmor_parser" [ 11.623507] audit: type=1400 audit(1520138579.466:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=767 comm="apparmor_parser" [ 15.143714] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 15.274142] r8169 0000:03:00.0 enp3s0: link down [ 15.274188] r8169 0000:03:00.0 enp3s0: link down [ 15.274257] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 17.557670] r8169 0000:03:00.0 enp3s0: link up [ 17.557683] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 38.427219] show_signal_msg: 23 callbacks suppressed [ 38.427223] deja-dup-monito[1573]: segfault at bbadbeef ip 00007fb10b440588 sp 00007fff661e9f40 error 6 in libjavascriptcoregtk-4.0.so.18.7.6[7fb10a688000+fc4000]