[ 0.000000] Linux version 4.15.0-10-generic (buildd@lgw01-amd64-036) (gcc version 7.3.0 (Ubuntu 7.3.0-3ubuntu1)) #11-Ubuntu SMP Tue Feb 13 18:23:35 UTC 2018 (Ubuntu 4.15.0-10.11-generic 4.15.3) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=fbe4a38a-a450-4d04-9cbf-29b84e0facd3 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffaffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffc53ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bffc5400-0x00000000bffe7fb7] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bffe7fb8-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed99fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq 8710w/30C3, BIOS 68MAD Ver. F.0E 08/19/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xbffb0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 3072M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 2 lose cover RAM: 0G [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 [ 0.000000] BRK [0x8e93e000, 0x8e93efff] PGTABLE [ 0.000000] BRK [0x8e93f000, 0x8e93ffff] PGTABLE [ 0.000000] BRK [0x8e940000, 0x8e940fff] PGTABLE [ 0.000000] BRK [0x8e941000, 0x8e941fff] PGTABLE [ 0.000000] BRK [0x8e942000, 0x8e942fff] PGTABLE [ 0.000000] BRK [0x8e943000, 0x8e943fff] PGTABLE [ 0.000000] BRK [0x8e944000, 0x8e944fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31917000-0x34c82fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F7B30 000024 (v02 HP ) [ 0.000000] ACPI: XSDT 0x00000000BFFC81C8 00007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FACP 0x00000000BFFC8084 0000F4 (v04 HP 30C3 00000003 HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000BFFC84CC 01455C (v01 HP nc65xx 00010000 MSFT 03000001) [ 0.000000] ACPI: FACS 0x00000000BFFE7D80 000040 [ 0.000000] ACPI: FACS 0x00000000BFFE7D80 000040 [ 0.000000] ACPI: SLIC 0x00000000BFFC8244 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: HPET 0x00000000BFFC83BC 000038 (v01 HP 30C3 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000BFFC83F4 000068 (v01 HP 30C3 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000BFFC845C 00003C (v01 HP 30C3 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x00000000BFFC8498 000032 (v02 HP 30C3 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BFFDCA28 000328 (v01 HP HPQSAT 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 0x00000000BFFDCD50 00017C (v01 HP HPQMRM 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 0x00000000BFFDD8D4 00025F (v01 HP Cpu0Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 0x00000000BFFDDB33 0000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 0x00000000BFFDDBD9 0004D7 (v01 HP CpuPm 00003000 INTL 20060317) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bffaffff] [ 0.000000] NODE_DATA(0) allocated [mem 0xbff85000-0xbffaffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000bffaffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bffaffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bffaffff] [ 0.000000] On node 0 totalpages: 786254 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12223 pages used for memmap [ 0.000000] DMA32 zone: 782256 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u1048576 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 773946 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-10-generic root=UUID=fbe4a38a-a450-4d04-9cbf-29b84e0facd3 ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3014580K/3145016K available (12300K kernel code, 2470K rwdata, 4220K rodata, 2404K init, 2416K bss, 130436K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39134 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2393.970 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.94 BogoMIPS (lpj=9575880) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.028407] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.028489] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.028536] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.028876] CPU: Physical Processor ID: 0 [ 0.028877] CPU: Processor Core ID: 0 [ 0.028879] mce: CPU supports 6 MCE banks [ 0.028889] process: using mwait in idle threads [ 0.028894] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.028895] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.028897] Spectre V2 : Mitigation: Full generic retpoline [ 0.029059] Freeing SMP alternatives memory: 36K [ 0.036000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0xb) [ 0.036000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.036000] core: PEBS disabled due to CPU errata [ 0.036000] ... version: 2 [ 0.036000] ... bit width: 40 [ 0.036000] ... generic registers: 2 [ 0.036000] ... value mask: 000000ffffffffff [ 0.036000] ... max period: 000000007fffffff [ 0.036000] ... fixed-purpose events: 3 [ 0.036000] ... event mask: 0000000700000003 [ 0.036000] Hierarchical SRCU implementation. [ 0.036000] smp: Bringing up secondary CPUs ... [ 0.036000] x86: Booting SMP configuration: [ 0.036000] .... node #0, CPUs: #1 [ 0.036099] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.036139] smp: Brought up 1 node, 2 CPUs [ 0.036139] smpboot: Max logical packages: 1 [ 0.036139] smpboot: Total of 2 processors activated (9575.88 BogoMIPS) [ 0.037929] devtmpfs: initialized [ 0.037929] x86/mm: Memory block size: 128MB [ 0.037929] evm: security.selinux [ 0.037929] evm: security.SMACK64 [ 0.037929] evm: security.SMACK64EXEC [ 0.037929] evm: security.SMACK64TRANSMUTE [ 0.037929] evm: security.SMACK64MMAP [ 0.037929] evm: security.apparmor [ 0.037929] evm: security.ima [ 0.037929] evm: security.capability [ 0.037929] PM: Registering ACPI NVS region [mem 0xbffc5400-0xbffe7fb7] (142264 bytes) [ 0.037929] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.037929] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.037929] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.037929] pinctrl core: initialized pinctrl subsystem [ 0.037929] RTC time: 10:50:43, date: 03/07/18 [ 0.037929] NET: Registered protocol family 16 [ 0.037929] audit: initializing netlink subsys (disabled) [ 0.037929] audit: type=2000 audit(1520419843.036:1): state=initialized audit_enabled=0 res=1 [ 0.037929] cpuidle: using governor ladder [ 0.037929] cpuidle: using governor menu [ 0.037929] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.037929] ACPI: bus type PCI registered [ 0.037929] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.037929] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.037929] PCI: not using MMCONFIG [ 0.037929] PCI: Using configuration type 1 for base access [ 0.041622] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.041622] ACPI: Added _OSI(Module Device) [ 0.041622] ACPI: Added _OSI(Processor Device) [ 0.041622] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.041622] ACPI: Added _OSI(Processor Aggregator Device) [ 0.068228] ACPI: Dynamic OEM Table Load: [ 0.068235] ACPI: SSDT 0xFFFF9875BB5FBC00 0002C1 (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 0.068624] ACPI: Dynamic OEM Table Load: [ 0.068631] ACPI: SSDT 0xFFFF9875BB4F0800 0005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 0.069050] ACPI: Dynamic OEM Table Load: [ 0.069056] ACPI: SSDT 0xFFFF9875BB5E1900 0000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 0.069289] ACPI: Dynamic OEM Table Load: [ 0.069294] ACPI: SSDT 0xFFFF9875BB5EF000 000085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 0.069952] ACPI: EC: EC started [ 0.069953] ACPI: EC: interrupt blocked [ 0.087318] ACPI: \_SB_.C003.C004.C006: Used as first EC [ 0.087320] ACPI: \_SB_.C003.C004.C006: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.087323] ACPI: \_SB_.C003.C004.C006: Used as boot DSDT EC to handle transactions [ 0.087323] ACPI: Interpreter enabled [ 0.087345] ACPI: (supports S0 S3 S4 S5) [ 0.087346] ACPI: Using IOAPIC for interrupt routing [ 0.087383] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.088374] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.088384] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.088861] ACPI: Enabled 14 GPEs in block 00 to 1F [ 0.096474] ACPI: Power Resource [C235] (off) [ 0.096912] ACPI: Power Resource [C23D] (on) [ 0.097966] ACPI: Power Resource [C244] (on) [ 0.099082] ACPI: Power Resource [C260] (on) [ 0.104121] ACPI: Power Resource [C185] (off) [ 0.108956] ACPI: Power Resource [C36E] (off) [ 0.109043] ACPI: Power Resource [C371] (off) [ 0.109126] ACPI: Power Resource [C372] (off) [ 0.109211] ACPI: Power Resource [C373] (off) [ 0.109294] ACPI: Power Resource [C374] (off) [ 0.109346] ACPI: Power Resource [C375] (off) [ 0.110190] ACPI: Power Resource [C38E] (off) [ 0.110275] ACPI: Power Resource [C38F] (off) [ 0.110361] ACPI: Power Resource [C390] (off) [ 0.110446] ACPI: Power Resource [C391] (off) [ 0.110528] ACPI: Power Resource [C392] (off) [ 0.116701] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff]) [ 0.116708] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.116714] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.116727] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.122197] PCI host bridge to bus 0000:00 [ 0.122200] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.122202] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.122204] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.122206] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfedfffff window] [ 0.122208] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 0.122209] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000dffff window] [ 0.122211] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.122222] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 [ 0.122377] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400 [ 0.122435] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.122596] pci 0000:00:19.0: [8086:1049] type 00 class 0x020000 [ 0.122623] pci 0000:00:19.0: reg 0x10: [mem 0xe8000000-0xe801ffff] [ 0.122635] pci 0000:00:19.0: reg 0x14: [mem 0xe8020000-0xe8020fff] [ 0.122647] pci 0000:00:19.0: reg 0x18: [io 0x5000-0x501f] [ 0.122744] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.122865] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 0.122928] pci 0000:00:1a.0: reg 0x20: [io 0x5020-0x503f] [ 0.123089] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 0.123151] pci 0000:00:1a.1: reg 0x20: [io 0x5040-0x505f] [ 0.123320] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 0.123346] pci 0000:00:1a.7: reg 0x10: [mem 0xe8021000-0xe80213ff] [ 0.123460] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.123590] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 0.123623] pci 0000:00:1b.0: reg 0x10: [mem 0xe8024000-0xe8027fff 64bit] [ 0.123746] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.123881] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.124018] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.124158] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 [ 0.124292] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.124436] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400 [ 0.124572] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.124717] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.124779] pci 0000:00:1d.0: reg 0x20: [io 0x5060-0x507f] [ 0.124937] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.124999] pci 0000:00:1d.1: reg 0x20: [io 0x5080-0x509f] [ 0.125159] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.125221] pci 0000:00:1d.2: reg 0x20: [io 0x50a0-0x50bf] [ 0.125393] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.125420] pci 0000:00:1d.7: reg 0x10: [mem 0xe8028000-0xe80283ff] [ 0.125534] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.125661] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.125875] pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100 [ 0.126009] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.126015] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO [ 0.126019] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 0.126027] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007) [ 0.126173] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a [ 0.126196] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.126208] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.126219] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 0.126231] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 0.126243] pci 0000:00:1f.1: reg 0x20: [io 0x50c0-0x50cf] [ 0.126269] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.126271] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.126272] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.126274] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.126412] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 [ 0.126440] pci 0000:00:1f.2: reg 0x10: [io 0x13f0-0x13f7] [ 0.126452] pci 0000:00:1f.2: reg 0x14: [io 0x15f4-0x15f7] [ 0.126464] pci 0000:00:1f.2: reg 0x18: [io 0x1370-0x1377] [ 0.126475] pci 0000:00:1f.2: reg 0x1c: [io 0x1574-0x1577] [ 0.126486] pci 0000:00:1f.2: reg 0x20: [io 0x5100-0x511f] [ 0.126498] pci 0000:00:1f.2: reg 0x24: [mem 0xe8029000-0xe80297ff] [ 0.126570] pci 0000:00:1f.2: PME# supported from D3hot [ 0.126760] pci 0000:01:00.0: [10de:040d] type 00 class 0x030000 [ 0.126789] pci 0000:01:00.0: reg 0x10: [mem 0xe5000000-0xe5ffffff] [ 0.126804] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.126819] pci 0000:01:00.0: reg 0x1c: [mem 0xe6000000-0xe7ffffff 64bit] [ 0.126830] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f] [ 0.126842] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.126852] pci 0000:01:00.0: enabling Extended Tags [ 0.127016] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.127019] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.127022] pci 0000:00:01.0: bridge window [mem 0xe5000000-0xe7ffffff] [ 0.127026] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.127086] pci 0000:00:1c.0: PCI bridge to [bus 08] [ 0.127204] pci 0000:10:00.0: [8086:4229] type 00 class 0x028000 [ 0.127267] pci 0000:10:00.0: reg 0x10: [mem 0xe4000000-0xe4001fff 64bit] [ 0.127503] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.136031] pci 0000:00:1c.1: PCI bridge to [bus 10] [ 0.136039] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff] [ 0.136175] acpiphp: Slot [1] registered [ 0.136220] pci 0000:00:1c.4: PCI bridge to [bus 28] [ 0.136225] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff] [ 0.136229] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff] [ 0.136316] pci 0000:02:06.0: [1180:0476] type 02 class 0x060700 [ 0.136334] pci 0000:02:06.0: proprietary Ricoh MMC controller disabled (via cardbus function) [ 0.136335] pci 0000:02:06.0: MMC cards are now supported by standard SDHCI controller [ 0.136357] pci 0000:02:06.0: reg 0x10: [mem 0xe4100000-0xe4100fff] [ 0.136408] pci 0000:02:06.0: supports D1 D2 [ 0.136410] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136481] pci 0000:02:06.1: [1180:0476] type 02 class 0x060700 [ 0.136508] pci 0000:02:06.1: reg 0x10: [mem 0xe4101000-0xe4101fff] [ 0.136560] pci 0000:02:06.1: supports D1 D2 [ 0.136562] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136625] pci 0000:02:06.2: [1180:0832] type 00 class 0x0c0010 [ 0.136652] pci 0000:02:06.2: reg 0x10: [mem 0xe4102000-0xe41027ff] [ 0.136765] pci 0000:02:06.2: supports D1 D2 [ 0.136767] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136827] pci 0000:02:06.3: [1180:0822] type 00 class 0x080500 [ 0.136854] pci 0000:02:06.3: reg 0x10: [mem 0xe4103000-0xe41030ff] [ 0.136966] pci 0000:02:06.3: supports D1 D2 [ 0.136967] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137030] pci 0000:02:06.5: [1180:0592] type 00 class 0x088000 [ 0.137056] pci 0000:02:06.5: reg 0x10: [mem 0xe4105000-0xe41050ff] [ 0.137169] pci 0000:02:06.5: supports D1 D2 [ 0.137171] pci 0000:02:06.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137232] pci 0000:02:06.6: [1180:0852] type 00 class 0x088000 [ 0.137258] pci 0000:02:06.6: reg 0x10: [mem 0xe4106000-0xe41060ff] [ 0.137372] pci 0000:02:06.6: supports D1 D2 [ 0.137373] pci 0000:02:06.6: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137471] pci 0000:00:1e.0: PCI bridge to [bus 02-04] (subtractive decode) [ 0.137478] pci 0000:00:1e.0: bridge window [mem 0xe4100000-0xe43fffff] [ 0.137486] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.137488] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.137490] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.137492] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfedfffff window] (subtractive decode) [ 0.137494] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff window] (subtractive decode) [ 0.137496] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000dffff window] (subtractive decode) [ 0.137554] pci_bus 0000:03: busn_res: [bus 03-04] end is updated to 03 [ 0.137605] pci_bus 0000:04: busn_res: [bus 04] end can not be updated to 07 [ 0.137610] pci 0000:00:1e.0: bridge has subordinate 04 but max busn 07 [ 0.139516] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11) [ 0.139690] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11) [ 0.139863] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11) [ 0.140044] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5 [ 0.140218] ACPI: PCI Interrupt Link [C140] (IRQs *10 11) [ 0.140391] ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5 [ 0.140564] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11) [ 0.140660] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20170831/pci_link-176) [ 0.142301] ACPI: EC: interrupt unblocked [ 0.142311] ACPI: EC: event unblocked [ 0.142319] ACPI: \_SB_.C003.C004.C006: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.142321] ACPI: \_SB_.C003.C004.C006: Used as boot DSDT EC to handle transactions and events [ 0.142656] SCSI subsystem initialized [ 0.142698] libata version 3.00 loaded. [ 0.142698] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.142698] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.142698] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.142698] vgaarb: loaded [ 0.142698] ACPI: bus type USB registered [ 0.142698] usbcore: registered new interface driver usbfs [ 0.142698] usbcore: registered new interface driver hub [ 0.142698] usbcore: registered new device driver usb [ 0.142698] EDAC MC: Ver: 3.0.0 [ 0.142698] PCI: Using ACPI for IRQ routing [ 0.145507] PCI: pci_cache_line_size set to 64 bytes [ 0.145599] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.145601] e820: reserve RAM buffer [mem 0xbffb0000-0xbfffffff] [ 0.145720] NetLabel: Initializing [ 0.145721] NetLabel: domain hash size = 128 [ 0.145721] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.145742] NetLabel: unlabeled traffic allowed by default [ 0.145765] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.145765] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.145765] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.148007] clocksource: Switched to clocksource hpet [ 0.166620] VFS: Disk quotas dquot_6.6.0 [ 0.166646] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.166812] AppArmor: AppArmor Filesystem Enabled [ 0.166870] pnp: PnP ACPI init [ 0.167156] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.167158] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.167161] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.167168] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.168116] pnp 00:01: [dma 1] [ 0.168224] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.168366] pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.168408] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.168463] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.168496] pnp 00:05: Plug and Play ACPI device, IDs SYN012f SYN0100 SYN0002 PNP0f13 (active) [ 0.168742] system 00:06: [io 0x0500-0x055f] has been reserved [ 0.168745] system 00:06: [io 0x0800-0x080f] has been reserved [ 0.168748] system 00:06: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.168750] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved [ 0.168756] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.169794] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.169797] system 00:07: [io 0x1000-0x107f] has been reserved [ 0.169799] system 00:07: [io 0x1100-0x113f] has been reserved [ 0.169801] system 00:07: [io 0x1200-0x121f] has been reserved [ 0.169803] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.169806] system 00:07: [mem 0xfec00000-0xfec000ff] could not be reserved [ 0.169808] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.169810] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.169812] system 00:07: [mem 0xfed90000-0xfed99fff] has been reserved [ 0.169818] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.171282] system 00:08: [mem 0x000ccc00-0x000cffff] has been reserved [ 0.171285] system 00:08: [mem 0x000d2000-0x000d3fff] has been reserved [ 0.171287] system 00:08: [mem 0xfeda0000-0xfedbffff] has been reserved [ 0.171289] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.171295] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.171320] pnp: PnP ACPI: found 9 devices [ 0.178358] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.178402] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 28] add_size 200000 add_align 100000 [ 0.178427] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 02-04] add_size 1000 [ 0.178442] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.178445] pci 0000:00:1e.0: BAR 13: assigned [io 0x6000-0x6fff] [ 0.178449] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref] [ 0.178452] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref] [ 0.178454] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.178457] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.178460] pci 0000:00:01.0: bridge window [mem 0xe5000000-0xe7ffffff] [ 0.178463] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.178468] pci 0000:00:1c.0: PCI bridge to [bus 08] [ 0.178483] pci 0000:00:1c.1: PCI bridge to [bus 10] [ 0.178489] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff] [ 0.178499] pci 0000:00:1c.4: PCI bridge to [bus 28] [ 0.178502] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff] [ 0.178508] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff] [ 0.178513] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.178525] pci 0000:02:06.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref] [ 0.178528] pci 0000:02:06.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff] [ 0.178531] pci 0000:02:06.1: BAR 15: assigned [mem 0xcc000000-0xcfffffff pref] [ 0.178534] pci 0000:02:06.1: BAR 16: assigned [mem 0xec000000-0xefffffff] [ 0.178537] pci 0000:02:06.0: BAR 13: assigned [io 0x6000-0x60ff] [ 0.178539] pci 0000:02:06.0: BAR 14: assigned [io 0x6400-0x64ff] [ 0.178541] pci 0000:02:06.1: BAR 13: assigned [io 0x6800-0x68ff] [ 0.178543] pci 0000:02:06.1: BAR 14: assigned [io 0x6c00-0x6cff] [ 0.178545] pci 0000:02:06.0: CardBus bridge to [bus 03] [ 0.178547] pci 0000:02:06.0: bridge window [io 0x6000-0x60ff] [ 0.178551] pci 0000:02:06.0: bridge window [io 0x6400-0x64ff] [ 0.178556] pci 0000:02:06.0: bridge window [mem 0xc4000000-0xc7ffffff pref] [ 0.178561] pci 0000:02:06.0: bridge window [mem 0xc8000000-0xcbffffff] [ 0.178565] pci 0000:02:06.1: CardBus bridge to [bus 04] [ 0.178567] pci 0000:02:06.1: bridge window [io 0x6800-0x68ff] [ 0.178571] pci 0000:02:06.1: bridge window [io 0x6c00-0x6cff] [ 0.178576] pci 0000:02:06.1: bridge window [mem 0xcc000000-0xcfffffff pref] [ 0.178581] pci 0000:02:06.1: bridge window [mem 0xec000000-0xefffffff] [ 0.178585] pci 0000:00:1e.0: PCI bridge to [bus 02-04] [ 0.178588] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] [ 0.178594] pci 0000:00:1e.0: bridge window [mem 0xe4100000-0xe43fffff] [ 0.178605] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.178607] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.178609] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.178611] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff window] [ 0.178612] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff window] [ 0.178614] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000dffff window] [ 0.178616] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.178618] pci_bus 0000:01: resource 1 [mem 0xe5000000-0xe7ffffff] [ 0.178619] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.178621] pci_bus 0000:10: resource 1 [mem 0xe4000000-0xe40fffff] [ 0.178623] pci_bus 0000:28: resource 0 [io 0x2000-0x3fff] [ 0.178625] pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff] [ 0.178626] pci_bus 0000:28: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.178628] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff] [ 0.178630] pci_bus 0000:02: resource 1 [mem 0xe4100000-0xe43fffff] [ 0.178632] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window] [ 0.178634] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window] [ 0.178635] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.178637] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff window] [ 0.178639] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff window] [ 0.178641] pci_bus 0000:02: resource 9 [mem 0x000d4000-0x000dffff window] [ 0.178643] pci_bus 0000:03: resource 0 [io 0x6000-0x60ff] [ 0.178644] pci_bus 0000:03: resource 1 [io 0x6400-0x64ff] [ 0.178646] pci_bus 0000:03: resource 2 [mem 0xc4000000-0xc7ffffff pref] [ 0.178648] pci_bus 0000:03: resource 3 [mem 0xc8000000-0xcbffffff] [ 0.178650] pci_bus 0000:04: resource 0 [io 0x6800-0x68ff] [ 0.178651] pci_bus 0000:04: resource 1 [io 0x6c00-0x6cff] [ 0.178653] pci_bus 0000:04: resource 2 [mem 0xcc000000-0xcfffffff pref] [ 0.178655] pci_bus 0000:04: resource 3 [mem 0xec000000-0xefffffff] [ 0.178804] NET: Registered protocol family 2 [ 0.179145] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.179279] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.179486] TCP: Hash tables configured (established 32768 bind 32768) [ 0.179561] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.179591] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.179667] NET: Registered protocol family 1 [ 0.182830] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.182858] PCI: CLS 64 bytes, default 64 [ 0.182918] Unpacking initramfs... [ 1.140267] Freeing initrd memory: 52656K [ 1.140460] Scanning for low memory corruption every 60 seconds [ 1.141225] Initialise system trusted keyrings [ 1.141239] Key type blacklist registered [ 1.141333] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.143104] zbud: loaded [ 1.143715] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.143903] fuse init (API version 7.26) [ 1.145795] Key type asymmetric registered [ 1.145796] Asymmetric key parser 'x509' registered [ 1.145905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.145942] io scheduler noop registered [ 1.145943] io scheduler deadline registered [ 1.146006] io scheduler cfq registered (default) [ 1.147654] vesafb: mode is 1920x1200x32, linelength=7680, pages=0 [ 1.147655] vesafb: scrolling: redraw [ 1.147657] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.147673] vesafb: framebuffer at 0xe7000000, mapped to 0x000000001cac137b, using 9024k, total 9024k [ 1.147820] Console: switching to colour frame buffer device 240x75 [ 1.147876] fb0: VESA VGA frame buffer device [ 1.147898] intel_idle: does not run on family 6 model 15 [ 1.152265] ACPI: AC Adapter [C1FB] (on-line) [ 1.152346] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.152357] ACPI: Sleep Button [C27F] [ 1.152404] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.152413] ACPI: Lid Switch [C201] [ 1.152462] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.152491] ACPI: Power Button [PWRF] [ 1.176460] Monitor-Mwait will be used to enter C-1 state [ 1.176474] Monitor-Mwait will be used to enter C-2 state [ 1.176482] tsc: Marking TSC unstable due to TSC halts in idle [ 1.183782] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.196393] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.196394] ACPI: Thermal Zone [TZ2] (66 C) [ 1.200780] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.200781] ACPI: Thermal Zone [TZ3] (45 C) [ 1.216621] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.216623] ACPI: Thermal Zone [TZ4] (31 C) [ 1.222352] thermal LNXTHERM:03: registered as thermal_zone3 [ 1.222353] ACPI: Thermal Zone [TZ5] (70 C) [ 1.257452] thermal LNXTHERM:04: registered as thermal_zone4 [ 1.257454] ACPI: Thermal Zone [TZ0] (60 C) [ 1.261805] thermal LNXTHERM:05: registered as thermal_zone5 [ 1.261806] ACPI: Thermal Zone [TZ1] (57 C) [ 1.261990] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.265575] Linux agpgart interface v0.103 [ 1.292539] tpm_tis 00:02: 1.2 TPM (device-id 0xB, rev-id 16) [ 1.309898] ACPI: Battery Slot [C1FD] (battery present) [ 1.310004] ACPI: Battery Slot [C1FC] (battery absent) [ 1.319537] tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us [ 1.346480] tpm tpm0: Adjusting TPM timeout parameters. [ 2.064140] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value [ 2.064144] tpm tpm0: TPM is disabled/deactivated (0x7) [ 2.067895] loop: module loaded [ 2.068239] ata_piix 0000:00:1f.1: version 2.13 [ 2.069265] scsi host0: ata_piix [ 2.069408] scsi host1: ata_piix [ 2.069452] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14 [ 2.069454] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15 [ 2.069573] libphy: Fixed MDIO Bus: probed [ 2.069574] tun: Universal TUN/TAP device driver, 1.6 [ 2.069628] PPP generic driver version 2.4.2 [ 2.069683] ata2: port disabled--ignoring [ 2.069721] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.069724] ehci-pci: EHCI PCI platform driver [ 2.069996] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 2.070003] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.070018] ehci-pci 0000:00:1a.7: debug port 1 [ 2.073924] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 2.073937] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe8021000 [ 2.088080] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.088133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.088135] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.088137] usb usb1: Product: EHCI Host Controller [ 2.088139] usb usb1: Manufacturer: Linux 4.15.0-10-generic ehci_hcd [ 2.088141] usb usb1: SerialNumber: 0000:00:1a.7 [ 2.088322] hub 1-0:1.0: USB hub found [ 2.088335] hub 1-0:1.0: 4 ports detected [ 2.088711] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.088715] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.088728] ehci-pci 0000:00:1d.7: debug port 1 [ 2.092630] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 2.092641] ehci-pci 0000:00:1d.7: irq 20, io mem 0xe8028000 [ 2.108079] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.108142] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.108144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.108146] usb usb2: Product: EHCI Host Controller [ 2.108147] usb usb2: Manufacturer: Linux 4.15.0-10-generic ehci_hcd [ 2.108149] usb usb2: SerialNumber: 0000:00:1d.7 [ 2.108303] hub 2-0:1.0: USB hub found [ 2.108312] hub 2-0:1.0: 6 ports detected [ 2.108509] ehci-platform: EHCI generic platform driver [ 2.108532] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.108534] ohci-pci: OHCI PCI platform driver [ 2.108545] ohci-platform: OHCI generic platform driver [ 2.108555] uhci_hcd: USB Universal Host Controller Interface driver [ 2.108774] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.108781] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.108789] uhci_hcd 0000:00:1a.0: detected 2 ports [ 2.108818] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005020 [ 2.108866] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.108868] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.108870] usb usb3: Product: UHCI Host Controller [ 2.108872] usb usb3: Manufacturer: Linux 4.15.0-10-generic uhci_hcd [ 2.108873] usb usb3: SerialNumber: 0000:00:1a.0 [ 2.109022] hub 3-0:1.0: USB hub found [ 2.109029] hub 3-0:1.0: 2 ports detected [ 2.109345] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.109350] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.109358] uhci_hcd 0000:00:1a.1: detected 2 ports [ 2.109386] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005040 [ 2.109434] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.109436] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.109438] usb usb4: Product: UHCI Host Controller [ 2.109439] usb usb4: Manufacturer: Linux 4.15.0-10-generic uhci_hcd [ 2.109441] usb usb4: SerialNumber: 0000:00:1a.1 [ 2.109585] hub 4-0:1.0: USB hub found [ 2.109593] hub 4-0:1.0: 2 ports detected [ 2.109916] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.109921] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.109928] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.109949] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005060 [ 2.109995] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.109997] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.109999] usb usb5: Product: UHCI Host Controller [ 2.110000] usb usb5: Manufacturer: Linux 4.15.0-10-generic uhci_hcd [ 2.110002] usb usb5: SerialNumber: 0000:00:1d.0 [ 2.110146] hub 5-0:1.0: USB hub found [ 2.110153] hub 5-0:1.0: 2 ports detected [ 2.110481] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.110486] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.110493] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.110521] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005080 [ 2.110568] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.110570] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.110571] usb usb6: Product: UHCI Host Controller [ 2.110573] usb usb6: Manufacturer: Linux 4.15.0-10-generic uhci_hcd [ 2.110575] usb usb6: SerialNumber: 0000:00:1d.1 [ 2.110719] hub 6-0:1.0: USB hub found [ 2.110726] hub 6-0:1.0: 2 ports detected [ 2.111051] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.111056] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 2.111065] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.111086] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050a0 [ 2.111132] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.111134] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.111136] usb usb7: Product: UHCI Host Controller [ 2.111138] usb usb7: Manufacturer: Linux 4.15.0-10-generic uhci_hcd [ 2.111139] usb usb7: SerialNumber: 0000:00:1d.2 [ 2.111267] hub 7-0:1.0: USB hub found [ 2.111273] hub 7-0:1.0: 2 ports detected [ 2.111464] i8042: PNP: PS/2 Controller [PNP0303:C25D,PNP0f13:C25E] at 0x60,0x64 irq 1,12 [ 2.113054] i8042: Detected active multiplexing controller, rev 1.1 [ 2.113808] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.113812] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.113846] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.113875] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.113902] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.114074] mousedev: PS/2 mouse device common for all mice [ 2.114348] rtc_cmos 00:03: RTC can wake from S4 [ 2.114521] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.114552] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.114561] i2c /dev entries driver [ 2.114626] device-mapper: uevent: version 1.0.3 [ 2.114733] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 2.114759] ledtrig-cpu: registered to indicate activity on CPUs [ 2.115198] NET: Registered protocol family 10 [ 2.120104] Segment Routing with IPv6 [ 2.120129] NET: Registered protocol family 17 [ 2.120169] Key type dns_resolver registered [ 2.120373] RAS: Correctable Errors collector initialized. [ 2.120413] microcode: sig=0x6fb, pf=0x80, revision=0xb3 [ 2.120465] microcode: Microcode Update Driver: v2.2. [ 2.120641] registered taskstats version 1 [ 2.120654] Loading compiled-in X.509 certificates [ 2.123946] Loaded X.509 cert 'Build time autogenerated kernel key: cfb5ef05dbf6c6d52c0a9007e2f0645cc1173f6d' [ 2.123969] zswap: loaded using pool lzo/zbud [ 2.128079] Key type big_key registered [ 2.128083] Key type trusted registered [ 2.130106] Key type encrypted registered [ 2.130109] AppArmor: AppArmor sha1 policy hashing enabled [ 2.138682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.151528] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value [ 2.151531] ima: No TPM chip found, activating TPM-bypass! (rc=7) [ 2.151555] evm: HMAC attrs: 0x1 [ 2.151996] Magic number: 10:353:830 [ 2.152074] platform PNP0C32:00: hash matches [ 2.152092] acpi PNP0C32:00: hash matches [ 2.152213] rtc_cmos 00:03: setting system clock to 2018-03-07 10:50:46 UTC (1520419846) [ 2.159320] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.159321] EDD information not available. [ 2.172034] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2281f7140a3, max_idle_ns: 440795284894 ns [ 2.230647] ata1.00: ATAPI: Optiarc DVD RW AD-7561A, GH09, max MWDMA2 [ 2.235393] ata1.00: configured for MWDMA2 [ 2.236915] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7561A GH09 PQ: 0 ANSI: 5 [ 2.263252] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.263254] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.263416] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.263485] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.268051] Freeing unused kernel memory: 2404K [ 2.268054] Write protecting the kernel read-only data: 20480k [ 2.269358] Freeing unused kernel memory: 2008K [ 2.275314] Freeing unused kernel memory: 1924K [ 2.285625] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.285626] x86/mm: Checking user space page tables [ 2.295320] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.424784] wmi_bus wmi_bus-PNP0C14:01: WQBG data block query control method not found [ 2.442015] ACPI: Video Device [C14B] (multi-head: yes rom: no post: no) [ 2.445411] acpi device:01: registered as cooling_device13 [ 2.445574] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input8 [ 2.456841] pps_core: LinuxPPS API ver. 1 registered [ 2.456843] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.458394] PTP clock support registered [ 2.469950] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.469951] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.470299] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.473391] sdhci: Secure Digital Host Controller Interface driver [ 2.473391] sdhci: Copyright(c) Pierre Ossman [ 2.475219] sdhci-pci 0000:02:06.3: SDHCI controller found [1180:0822] (rev 20) [ 2.475373] sdhci-pci 0000:02:06.3: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.475382] sdhci-pci 0000:02:06.3: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.478699] sdhci-pci 0000:02:06.3: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.480438] mmc0: SDHCI controller on PCI [0000:02:06.3] using DMA [ 2.530578] checking generic (e7000000 8d0000) vs hw (d0000000 10000000) [ 2.530580] checking generic (e7000000 8d0000) vs hw (e6000000 2000000) [ 2.530581] fb: switching to nouveaufb from VESA VGA [ 2.530611] Console: switching to colour dummy device 80x25 [ 2.530766] nouveau 0000:01:00.0: NVIDIA G84 (084d00a2) [ 2.550701] nouveau 0000:01:00.0: bios: version 60.84.74.00.11 [ 2.571567] firewire_ohci 0000:02:06.2: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 2.572993] nouveau 0000:01:00.0: fb: 512 MiB GDDR3 [ 2.649204] [TTM] Zone kernel: Available graphics memory: 1536804 kiB [ 2.649205] [TTM] Initializing pool allocator [ 2.649212] [TTM] Initializing DMA pool allocator [ 2.649228] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB [ 2.649229] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 2.649234] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 2.649236] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 2.649238] nouveau 0000:01:00.0: DRM: DCB outp 00: 01010323 00010034 [ 2.649241] nouveau 0000:01:00.0: DRM: DCB outp 01: 02002300 00000028 [ 2.649243] nouveau 0000:01:00.0: DRM: DCB outp 02: 02021312 00000030 [ 2.649245] nouveau 0000:01:00.0: DRM: DCB outp 03: 010333f1 00c0c080 [ 2.649247] nouveau 0000:01:00.0: DRM: DCB outp 04: 02026312 00020020 [ 2.649249] nouveau 0000:01:00.0: DRM: DCB conn 00: 0040 [ 2.649251] nouveau 0000:01:00.0: DRM: DCB conn 01: 1131 [ 2.649252] nouveau 0000:01:00.0: DRM: DCB conn 02: 0200 [ 2.649254] nouveau 0000:01:00.0: DRM: DCB conn 03: 0310 [ 2.649256] nouveau 0000:01:00.0: DRM: DCB conn 04: 0311 [ 2.649258] nouveau 0000:01:00.0: DRM: DCB conn 05: 0313 [ 2.649259] nouveau 0000:01:00.0: DRM: DCB conn 06: 2461 [ 2.650889] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19 [ 2.650929] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing [ 2.650966] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.650967] [drm] Driver supports precise vblank timestamp query. [ 2.651267] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 2.652755] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies [ 2.682368] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 2.696709] nouveau 0000:01:00.0: DRM: allocated 1920x1200 fb: 0x70000, bo 0000000057d72f22 [ 2.700168] fbcon: nouveaufb (fb0) is primary device [ 2.700315] Console: switching to colour frame buffer device 240x75 [ 2.700373] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 2.744045] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 2.776462] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:ec:a8:75:a0 [ 2.776464] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.776493] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: 1032FF-0FF [ 2.776539] ahci 0000:00:1f.2: version 3.0 [ 2.776897] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.776920] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode [ 2.776924] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc [ 2.778113] scsi host2: ahci [ 2.778252] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 2.778433] scsi host3: ahci [ 2.778645] scsi host4: ahci [ 2.778702] ata3: SATA max UDMA/133 abar m2048@0xe8029000 port 0xe8029100 irq 26 [ 2.778703] ata4: DUMMY [ 2.778704] ata5: DUMMY [ 2.875090] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d [ 2.875093] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.875095] usb 3-1: Product: HP Integrated Module [ 2.875097] usb 3-1: Manufacturer: Broadcom Corp [ 3.070061] usb 5-1: New USB device found, idVendor=0408, idProduct=3023 [ 3.070064] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.070066] usb 5-1: Product: HID-TQH-FS [ 3.070067] usb 5-1: Manufacturer: Quanta [ 3.070069] usb 5-1: SerialNumber: tqhm132900aj [ 3.079330] hidraw: raw HID events driver (C) Jiri Kosina [ 3.090793] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.091300] usbcore: registered new interface driver usbhid [ 3.091301] usbhid: USB HID core driver [ 3.094211] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.094214] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.094289] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 3.094292] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3.094695] ata3.00: ATA-8: INTENSO, S8FM06.7, max UDMA/133 [ 3.094697] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.096713] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.096716] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.096789] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 3.096791] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3.097097] ata3.00: configured for UDMA/133 [ 3.097447] hid-generic 0003:0408:3023.0002: hiddev0,hidraw0: USB HID v1.11 Device [Quanta HID-TQH-FS] on usb-0000:00:1d.0-1/input1 [ 3.097848] scsi 2:0:0:0: Direct-Access ATA INTENSO 06.7 PQ: 0 ANSI: 5 [ 3.098099] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 3.098115] sd 2:0:0:0: [sda] Write Protect is off [ 3.098117] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.098141] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.098639] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.099175] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.099751] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.100439] firewire_core 0000:02:06.2: created device fw0: GUID 00023f9929093010, S400 [ 3.252432] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa44791/0x300000/0x0/0x0, board id: 0, fw id: 496530 [ 3.252437] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 [ 3.294607] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 [ 3.880036] usb 5-2: new full-speed USB device number 3 using uhci_hcd [ 4.066082] usb 5-2: New USB device found, idVendor=08ff, idProduct=2580 [ 4.066085] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.066087] usb 5-2: Product: Fingerprint Sensor [ 4.456043] usb 6-2: new full-speed USB device number 2 using uhci_hcd [ 4.650090] usb 6-2: New USB device found, idVendor=062a, idProduct=4101 [ 4.650092] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.650094] usb 6-2: Product: 2.4G Keyboard Mouse [ 4.650096] usb 6-2: Manufacturer: MOSART Semi. [ 4.655563] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/0003:062A:4101.0003/input/input14 [ 4.712177] hid-generic 0003:062A:4101.0003: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.1-2/input0 [ 4.717037] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/0003:062A:4101.0004/input/input15 [ 4.776285] hid-generic 0003:062A:4101.0004: input,hiddev1,hidraw2: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.1-2/input1 [ 5.370740] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input13 [ 5.510887] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 5.683833] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.694945] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.712133] systemd[1]: Detected architecture x86-64. [ 5.714802] systemd[1]: Set hostname to . [ 5.841146] systemd[1]: Created slice User and Session Slice. [ 5.841210] systemd[1]: Reached target User and Group Name Lookups. [ 5.841419] systemd[1]: Created slice System Slice. [ 5.841534] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.841627] systemd[1]: Listening on udev Control Socket. [ 5.841653] systemd[1]: Reached target Slices. [ 5.841733] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.866138] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 5.898970] lp: driver loaded but no devices found [ 5.921429] ppdev: user-space parallel port driver [ 5.924424] parport_pc 00:01: reported by Plug and Play ACPI [ 5.924512] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 6.020121] lp0: using parport0 (interrupt-driven). [ 6.154475] systemd-journald[253]: Received request to flush runtime journal from PID 1 [ 6.457255] hp_accel: hardware type HP8710 found [ 6.458735] lis3lv02d: 12 bits sensor found [ 6.551010] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.633185] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.645367] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input16 [ 6.655301] Bluetooth: Core ver 2.22 [ 6.655321] NET: Registered protocol family 31 [ 6.655322] Bluetooth: HCI device and connection manager initialized [ 6.655326] Bluetooth: HCI socket layer initialized [ 6.655329] Bluetooth: L2CAP socket layer initialized [ 6.655336] Bluetooth: SCO socket layer initialized [ 6.688541] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.689205] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.689207] cfg80211: failed to load regulatory.db [ 6.689303] input: Quanta HID-TQH-FS as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:0408:3023.0001/input/input18 [ 6.693327] hid-multitouch 0003:0408:3023.0001: input,hiddev2,hidraw3: USB HID v1.11 Mouse [Quanta HID-TQH-FS] on usb-0000:00:1d.0-1/input0 [ 6.714933] usbcore: registered new interface driver btusb [ 6.735765] r592: driver successfully loaded [ 6.739572] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x0000000000001042 (\_SB.C003.C004.C0D2) (20170831/utaddress-247) [ 6.739579] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.739583] ACPI Warning: SystemIO range 0x0000000000001130-0x000000000000113F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB.C003.C004.C0E4) (20170831/utaddress-247) [ 6.739588] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.739589] ACPI Warning: SystemIO range 0x0000000000001100-0x000000000000112F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB.C003.C004.C0E4) (20170831/utaddress-247) [ 6.739594] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.739594] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 6.740626] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30c3] [ 6.798767] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 6.798769] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 6.798841] iwl4965 0000:10:00.0: can't disable ASPM; OS doesn't have ASPM control [ 6.799004] iwl4965 0000:10:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 6.837637] iwl4965 0000:10:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 6.839986] iwl4965 0000:10:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 6.842549] iwl4965 0000:10:00.0: loaded firmware version 228.61.2.24 [ 6.863415] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 6.876743] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c38, PCI irq 18 [ 6.876747] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 6.876753] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x6000-0x6fff] [ 6.876755] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xe4100000-0xe43fffff] [ 6.876758] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4100000-0xe43fffff: [ 6.876761] excluding 0xe4100000-0xe412ffff [ 6.886390] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:30c3] [ 6.899404] input: HP WMI hotkeys as /devices/virtual/input/input19 [ 7.008220] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1981: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker [ 7.008224] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.008226] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x6/0x0/0x0/0x0/0x0) [ 7.008228] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 [ 7.008230] snd_hda_codec_analog hdaudioC0D0: dig-out=0xa/0x0 [ 7.008231] snd_hda_codec_analog hdaudioC0D0: inputs: [ 7.008234] snd_hda_codec_analog hdaudioC0D0: Mic=0x8 [ 7.008236] snd_hda_codec_analog hdaudioC0D0: Internal Mic=0x18 [ 7.008237] snd_hda_codec_analog hdaudioC0D0: Line=0x9 [ 7.020694] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0c38, PCI irq 19 [ 7.020698] yenta_cardbus 0000:02:06.1: Socket status: 30000810 [ 7.020725] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [io 0x6000-0x6fff] [ 7.020727] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge window: [mem 0xe4100000-0xe43fffff] [ 7.020730] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe4100000-0xe43fffff: [ 7.020733] excluding 0xe4100000-0xe412ffff [ 7.021385] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 7.021461] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [ 7.021560] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 [ 7.038519] r852: driver loaded successfully [ 7.171960] intel_powerclamp: No package C-state available [ 7.316521] Adding 409596k swap on /dev/sda1. Priority:-2 extents:1 across:409596k SSFS [ 7.469890] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 7.598681] iwl4965 0000:10:00.0 wlp16s0: renamed from wlan0 [ 7.621574] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: [ 7.621582] excluding 0xc0000-0xd3fff 0xe0000-0xfffff [ 7.621608] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: [ 7.621615] excluding 0xa0000000-0xa0ffffff [ 7.621635] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: [ 7.621642] excluding 0x60000000-0x60ffffff [ 7.680927] audit: type=1400 audit(1520419852.024:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4110/usr/lib/snapd/snap-confine" pid=558 comm="apparmor_parser" [ 7.680933] audit: type=1400 audit(1520419852.024:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4110/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=558 comm="apparmor_parser" [ 7.680936] audit: type=1400 audit(1520419852.024:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4110/usr/lib/snapd/snap-confine//snap_update_ns" pid=558 comm="apparmor_parser" [ 7.694032] audit: type=1400 audit(1520419852.036:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=557 comm="apparmor_parser" [ 7.694037] audit: type=1400 audit(1520419852.036:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=557 comm="apparmor_parser" [ 7.694040] audit: type=1400 audit(1520419852.036:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=557 comm="apparmor_parser" [ 7.694042] audit: type=1400 audit(1520419852.036:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser" [ 7.705547] audit: type=1400 audit(1520419852.048:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=563 comm="apparmor_parser" [ 7.705553] audit: type=1400 audit(1520419852.048:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=563 comm="apparmor_parser" [ 7.705556] audit: type=1400 audit(1520419852.048:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=563 comm="apparmor_parser" [ 7.944044] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 [ 7.944054] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe4130000-0xe43fffff: [ 7.944280] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: [ 7.944285] excluding 0xc0000-0xd3fff 0xe0000-0xfffff [ 7.944327] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: [ 7.944334] excluding 0xa0000000-0xa0ffffff [ 7.944367] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: [ 7.944374] excluding 0x60000000-0x60ffffff [ 7.959254] excluding 0xe43f0000-0xe441bfff [ 7.961190] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 19) [ 8.041502] scsi host5: pata_pcmcia [ 8.041737] ata6: PATA max PIO0 cmd 0x6100 ctl 0x610e irq 19 [ 8.180373] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.180375] Bluetooth: BNEP filters: protocol multicast [ 8.180381] Bluetooth: BNEP socket layer initialized [ 8.589681] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 9.052300] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 9.060312] IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready [ 9.309894] IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready [ 9.389443] IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready [ 11.401099] Bluetooth: RFCOMM TTY layer initialized [ 11.401106] Bluetooth: RFCOMM socket layer initialized [ 11.401112] Bluetooth: RFCOMM ver 1.11 [ 11.654675] wlp16s0: authenticate with bc:05:43:46:6c:80 [ 11.672062] wlp16s0: send auth to bc:05:43:46:6c:80 (try 1/3) [ 11.675845] wlp16s0: authenticated [ 11.676085] wlp16s0: waiting for beacon from bc:05:43:46:6c:80 [ 11.712058] wlp16s0: associate with bc:05:43:46:6c:80 (try 1/3) [ 11.717605] wlp16s0: RX AssocResp from bc:05:43:46:6c:80 (capab=0x431 status=0 aid=1) [ 11.744935] wlp16s0: associated [ 12.767120] IPv6: ADDRCONF(NETDEV_CHANGE): wlp16s0: link becomes ready [ 12.771411] iwl4965 0000:10:00.0: Enabling power save might cause firmware crashes [ 13.685556] rfkill: input handler disabled [ 23.382114] random: crng init done [ 135.023697] show_signal_msg: 33 callbacks suppressed [ 135.023701] deja-dup-monito[1997]: segfault at bbadbeef ip 00007fcfc818f588 sp 00007ffddf630850 error 6 in libjavascriptcoregtk-4.0.so.18.7.6[7fcfc73d7000+fc4000] [ 445.113211] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv84_xuc00f failed with error -2 [ 445.113216] nouveau 0000:01:00.0: vp: unable to load firmware nouveau/nv84_xuc00f [ 445.113218] nouveau 0000:01:00.0: vp: init failed, -2 [ 445.113242] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv84_xuc103 failed with error -2 [ 445.113244] nouveau 0000:01:00.0: bsp: unable to load firmware nouveau/nv84_xuc103 [ 445.113246] nouveau 0000:01:00.0: bsp: init failed, -2 [ 572.015734] perf: interrupt took too long (2543 > 2500), lowering kernel.perf_event_max_sample_rate to 78500 [ 1288.071935] perf: interrupt took too long (3198 > 3178), lowering kernel.perf_event_max_sample_rate to 62500 [ 1596.185621] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 1596.185787] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 2190.099268] perf: interrupt took too long (4028 > 3997), lowering kernel.perf_event_max_sample_rate to 49500