[ 0.000000] Linux version 4.15.0-29-generic (buildd@lgw01-amd64-021) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #31~16.04.1-Ubuntu SMP Wed Jul 18 10:19:08 UTC 2018 (Ubuntu 4.15.0-29.31~16.04.1-generic 4.15.18) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000967ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfeaffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfeb0000-0x00000000cfee1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfee2000-0x00000000cfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P, BIOS F8 02/24/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask FC0000000 write-back [ 0.000000] 5 base 230000000 mask FF0000000 uncachable [ 0.000000] 6 base 0CFF00000 mask FFFF00000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 8191M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000f57a0-0x000f57af] mapped at [(ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x1c3fffff] [ 0.000000] Base memory trampoline at [(ptrval)] 92000 size 16384 [ 0.000000] BRK [0x1bfc9000, 0x1bfc9fff] PGTABLE [ 0.000000] BRK [0x1bfca000, 0x1bfcafff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31b9c000-0x34dc5fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F75D0 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000CFEE2040 00004C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000CFEE20C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000CFEE2180 0050A9 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x00000000CFEB0000 000040 [ 0.000000] ACPI: EUDS 0x00000000CFEE79C0 000500 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: HPET 0x00000000CFEE7880 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000CFEE7900 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 0x00000000CFEE7280 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x00000000CFEE8530 00018A (v01 PmRef Cpu0Cst 00003001 INTL 20040311) [ 0.000000] ACPI: SSDT 0x00000000CFEE86C0 00018A (v01 PmRef Cpu1Cst 00003001 INTL 20040311) [ 0.000000] ACPI: SSDT 0x00000000CFEE8850 00018A (v01 PmRef Cpu2Cst 00003001 INTL 20040311) [ 0.000000] ACPI: SSDT 0x00000000CFEE89E0 00018A (v01 PmRef Cpu3Cst 00003001 INTL 20040311) [ 0.000000] ACPI: SSDT 0x00000000CFEE8B70 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 8072MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] BRK [0x1bfcb000, 0x1bfcbfff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff] [ 0.000000] HighMem [mem 0x00000000377fe000-0x000000022fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfeaffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff] [ 0.000000] On node 0 totalpages: 2096709 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3989 pages, LIFO batch:0 [ 0.000000] Normal zone: 2180 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1869490 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 107 pages [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00096000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0xe4000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x7f/0x432 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 30 pages/cpu @(ptrval) s93068 r0 d29812 u122880 [ 0.000000] pcpu-alloc: s93068 r0 d29812 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2094489 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-29-generic root=UUID=ecc21d3e-2058-4bbc-83fd-5a294c65fb6b ro quiet splash vt.handoff=7 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:00230000) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 8230904K/8386836K available (8830K kernel code, 890K rwdata, 3460K rodata, 1088K init, 848K bss, 155932K reserved, 0K cma-reserved, 7477960K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB) pkmap : 0xff800000 - 0xffa00000 (2048 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xdbcf9000 - 0xdbe09000 (1088 kB) .data : 0xdb89fb80 - 0xdbce58c0 (4375 kB) .text : 0xdb000000 - 0xdb89fb80 (8830 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 37771 entries in 74 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 8912896 bytes of page_ext [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2999.657 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.31 BogoMIPS (lpj=11998628) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.024000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.024000] CPU: Physical Processor ID: 0 [ 0.024000] CPU: Processor Core ID: 0 [ 0.024000] mce: CPU supports 6 MCE banks [ 0.024000] CPU0: Thermal monitoring enabled (TM2) [ 0.024000] process: using mwait in idle threads [ 0.024000] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.024000] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.024000] Spectre V2 : Mitigation: Full generic retpoline [ 0.024000] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch [ 0.024000] Speculative Store Bypass: Vulnerable [ 0.024000] Freeing SMP alternatives memory: 36K [ 0.032000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.032000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.032000] ... version: 2 [ 0.032000] ... bit width: 40 [ 0.032000] ... generic registers: 2 [ 0.032000] ... value mask: 000000ffffffffff [ 0.032000] ... max period: 000000007fffffff [ 0.032000] ... fixed-purpose events: 3 [ 0.032000] ... event mask: 0000000700000003 [ 0.032000] Hierarchical SRCU implementation. [ 0.032000] smp: Bringing up secondary CPUs ... [ 0.032000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.032000] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.032000] x86: Booting SMP configuration: [ 0.032000] .... node #0, CPUs: #1 [ 0.004000] Initializing CPU#1 [ 0.032071] smp: Brought up 1 node, 2 CPUs [ 0.032071] smpboot: Max logical packages: 2 [ 0.032071] smpboot: Total of 2 processors activated (11998.62 BogoMIPS) [ 0.035023] devtmpfs: initialized [ 0.035023] evm: security.selinux [ 0.035023] evm: security.SMACK64 [ 0.035023] evm: security.SMACK64EXEC [ 0.035023] evm: security.SMACK64TRANSMUTE [ 0.035023] evm: security.SMACK64MMAP [ 0.035023] evm: security.apparmor [ 0.035023] evm: security.ima [ 0.035023] evm: security.capability [ 0.035023] PM: Registering ACPI NVS region [mem 0xcfeb0000-0xcfee1fff] (204800 bytes) [ 0.036009] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.036009] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.036065] pinctrl core: initialized pinctrl subsystem [ 0.036176] RTC time: 4:53:04, date: 07/31/18 [ 0.036266] NET: Registered protocol family 16 [ 0.036415] audit: initializing netlink subsys (disabled) [ 0.036423] audit: type=2000 audit(1533012784.036:1): state=initialized audit_enabled=0 res=1 [ 0.036423] EISA bus registered [ 0.036423] cpuidle: using governor ladder [ 0.036423] cpuidle: using governor menu [ 0.036423] ACPI: bus type PCI registered [ 0.036423] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.036423] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.036423] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.036423] PCI: Using MMCONFIG for extended config space [ 0.036423] PCI: Using configuration type 1 for base access [ 0.037851] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.037851] ACPI: Added _OSI(Module Device) [ 0.037851] ACPI: Added _OSI(Processor Device) [ 0.037851] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.037851] ACPI: Added _OSI(Processor Aggregator Device) [ 0.037851] ACPI: Added _OSI(Linux-Dell-Video) [ 0.042033] ACPI: Dynamic OEM Table Load: [ 0.042039] ACPI: SSDT 0x00000000EDF0BC00 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.042221] ACPI: Dynamic OEM Table Load: [ 0.042226] ACPI: SSDT 0x00000000EDE8FA00 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.042352] ACPI: Dynamic OEM Table Load: [ 0.042357] ACPI Exception: AE_NO_MEMORY, SSDT 0x00000000EDE8F200 Table is duplicated (20170831/tbdata-562) [ 0.042363] ACPI Error: Method parse/execution failed \_PR.CPU1._PDC, AE_ALREADY_EXISTS (20170831/psparse-550) [ 0.042638] ACPI: Interpreter enabled [ 0.042669] ACPI: (supports S0 S1 S4 S5) [ 0.042670] ACPI: Using IOAPIC for interrupt routing [ 0.042698] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.042899] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.048875] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.048880] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.048884] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.049128] PCI host bridge to bus 0000:00 [ 0.049131] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.049132] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.049134] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.049136] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.049137] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.049139] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff window] [ 0.049140] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.049152] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000 [ 0.049173] DMAR: Forcing write-buffer flush capability [ 0.049174] DMAR: Disabling IOMMU for graphics on this chipset [ 0.049260] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400 [ 0.049296] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.049399] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.049438] pci 0000:00:1a.0: reg 0x20: [io 0xe000-0xe01f] [ 0.049557] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.049596] pci 0000:00:1a.1: reg 0x20: [io 0xe100-0xe11f] [ 0.049712] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.049751] pci 0000:00:1a.2: reg 0x20: [io 0xe200-0xe21f] [ 0.049872] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.049890] pci 0000:00:1a.7: reg 0x10: [mem 0xea405000-0xea4053ff] [ 0.050040] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.050059] pci 0000:00:1b.0: reg 0x10: [mem 0xea400000-0xea403fff 64bit] [ 0.050122] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.050218] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.050284] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.050384] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400 [ 0.050450] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.050548] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 [ 0.050613] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.050712] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 [ 0.050778] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.050877] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.050916] pci 0000:00:1d.0: reg 0x20: [io 0xe300-0xe31f] [ 0.051033] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.051072] pci 0000:00:1d.1: reg 0x20: [io 0xe400-0xe41f] [ 0.051188] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.051227] pci 0000:00:1d.2: reg 0x20: [io 0xe500-0xe51f] [ 0.051347] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.051365] pci 0000:00:1d.7: reg 0x10: [mem 0xea404000-0xea4043ff] [ 0.051510] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.051640] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 0.051714] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.051718] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.051721] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.051723] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.051726] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b) [ 0.051831] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 [ 0.051847] pci 0000:00:1f.2: reg 0x10: [io 0xe600-0xe607] [ 0.051854] pci 0000:00:1f.2: reg 0x14: [io 0xe700-0xe703] [ 0.051860] pci 0000:00:1f.2: reg 0x18: [io 0xe800-0xe807] [ 0.051867] pci 0000:00:1f.2: reg 0x1c: [io 0xe900-0xe903] [ 0.051873] pci 0000:00:1f.2: reg 0x20: [io 0xea00-0xea1f] [ 0.051880] pci 0000:00:1f.2: reg 0x24: [mem 0xea406000-0xea4067ff] [ 0.051915] pci 0000:00:1f.2: PME# supported from D3hot [ 0.052010] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.052026] pci 0000:00:1f.3: reg 0x10: [mem 0xea407000-0xea4070ff 64bit] [ 0.052044] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.052174] pci 0000:01:00.0: [10de:0622] type 00 class 0x030000 [ 0.052190] pci 0000:01:00.0: reg 0x10: [mem 0xe6000000-0xe6ffffff] [ 0.052199] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.052208] pci 0000:01:00.0: reg 0x1c: [mem 0xe4000000-0xe5ffffff 64bit] [ 0.052214] pci 0000:01:00.0: reg 0x24: [io 0xa000-0xa07f] [ 0.052221] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.052226] pci 0000:01:00.0: enabling Extended Tags [ 0.052319] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.052322] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.052324] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff] [ 0.052327] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.052366] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.052445] pci 0000:03:00.0: [197b:2363] type 00 class 0x010400 [ 0.052536] pci 0000:03:00.0: reg 0x24: [mem 0xea100000-0xea101fff] [ 0.052603] pci 0000:03:00.0: PME# supported from D3hot [ 0.052675] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185 [ 0.052702] pci 0000:03:00.1: reg 0x10: [io 0xb000-0xb007] [ 0.052715] pci 0000:03:00.1: reg 0x14: [io 0xb100-0xb103] [ 0.052727] pci 0000:03:00.1: reg 0x18: [io 0xb200-0xb207] [ 0.052739] pci 0000:03:00.1: reg 0x1c: [io 0xb300-0xb303] [ 0.052751] pci 0000:03:00.1: reg 0x20: [io 0xb400-0xb40f] [ 0.052862] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.052871] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.052874] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff] [ 0.052877] pci 0000:00:1c.3: bridge window [mem 0xea100000-0xea1fffff] [ 0.052921] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.052924] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.052927] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe8ffffff] [ 0.052932] pci 0000:00:1c.4: bridge window [mem 0xea000000-0xea0fffff 64bit pref] [ 0.052985] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.053011] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.053037] pci 0000:05:00.0: reg 0x18: [mem 0xea210000-0xea210fff 64bit pref] [ 0.053053] pci 0000:05:00.0: reg 0x20: [mem 0xea200000-0xea20ffff 64bit pref] [ 0.053064] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.053139] pci 0000:05:00.0: supports D1 D2 [ 0.053141] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.064022] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.064026] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.064030] pci 0000:00:1c.5: bridge window [mem 0xe9000000-0xe9ffffff] [ 0.064036] pci 0000:00:1c.5: bridge window [mem 0xea200000-0xea2fffff 64bit pref] [ 0.064092] pci 0000:06:07.0: [104c:8024] type 00 class 0x0c0010 [ 0.064113] pci 0000:06:07.0: reg 0x10: [mem 0xea304000-0xea3047ff] [ 0.064123] pci 0000:06:07.0: reg 0x14: [mem 0xea300000-0xea303fff] [ 0.064194] pci 0000:06:07.0: supports D1 D2 [ 0.064196] pci 0000:06:07.0: PME# supported from D0 D1 D2 D3hot [ 0.064269] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.064273] pci 0000:00:1e.0: bridge window [mem 0xea300000-0xea3fffff] [ 0.064278] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.064280] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.064281] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.064283] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.064284] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.064286] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff window] (subtractive decode) [ 0.064309] pci_bus 0000:00: on NUMA node 0 [ 0.064895] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.064958] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.065020] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.065082] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.065144] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.065206] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.065268] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.065329] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.065698] SCSI subsystem initialized [ 0.065717] libata version 3.00 loaded. [ 0.065717] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.065717] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.065717] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.065717] vgaarb: loaded [ 0.065717] ACPI: bus type USB registered [ 0.065717] usbcore: registered new interface driver usbfs [ 0.065717] usbcore: registered new interface driver hub [ 0.065717] usbcore: registered new device driver usb [ 0.065717] EDAC MC: Ver: 3.0.0 [ 0.065717] PCI: Using ACPI for IRQ routing [ 0.065717] PCI: pci_cache_line_size set to 64 bytes [ 0.065717] e820: reserve RAM buffer [mem 0x00096800-0x0009ffff] [ 0.065717] e820: reserve RAM buffer [mem 0xcfeb0000-0xcfffffff] [ 0.065717] NetLabel: Initializing [ 0.065717] NetLabel: domain hash size = 128 [ 0.065717] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.065717] NetLabel: unlabeled traffic allowed by default [ 0.065717] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.065717] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.065717] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.069014] clocksource: Switched to clocksource hpet [ 0.083031] VFS: Disk quotas dquot_6.6.0 [ 0.083050] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.083164] AppArmor: AppArmor Filesystem Enabled [ 0.083194] pnp: PnP ACPI init [ 0.083396] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.083398] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.083400] system 00:00: [io 0x0800-0x0805] has been reserved [ 0.083402] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.083404] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.083409] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.083484] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.083763] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.083975] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.084146] system 00:04: [io 0x0400-0x04cf] could not be reserved [ 0.084148] system 00:04: [io 0x04d2-0x04ff] has been reserved [ 0.084153] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.084374] system 00:05: [mem 0xe0000000-0xe3ffffff] has been reserved [ 0.084379] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.084596] system 00:06: [mem 0x000db000-0x000dbfff] has been reserved [ 0.084598] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.084600] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.084602] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.084604] system 00:06: [mem 0xcfeb0000-0xcfefffff] could not be reserved [ 0.084606] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.084608] system 00:06: [mem 0x00100000-0xcfeaffff] could not be reserved [ 0.084610] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.084612] system 00:06: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.084614] system 00:06: [mem 0xfed20000-0xfed8ffff] could not be reserved [ 0.084616] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.084618] system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.084620] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved [ 0.084622] system 00:06: [mem 0x000e0000-0x000effff] has been reserved [ 0.084626] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.084632] pnp: PnP ACPI: found 7 devices [ 0.084635] PnPBIOS: Disabled [ 0.121182] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.121198] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.121201] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.121203] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.121210] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.121235] pci 0000:00:1c.0: BAR 14: assigned [mem 0xea500000-0xea6fffff] [ 0.121243] pci 0000:00:1c.0: BAR 15: assigned [mem 0xea700000-0xea8fffff 64bit pref] [ 0.121250] pci 0000:00:1c.3: BAR 15: assigned [mem 0xea900000-0xeaafffff 64bit pref] [ 0.121253] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.121257] pci 0000:01:00.0: BAR 6: assigned [mem 0xe7000000-0xe707ffff pref] [ 0.121259] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.121261] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.121264] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff] [ 0.121266] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.121270] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.121272] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.121275] pci 0000:00:1c.0: bridge window [mem 0xea500000-0xea6fffff] [ 0.121278] pci 0000:00:1c.0: bridge window [mem 0xea700000-0xea8fffff 64bit pref] [ 0.121283] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.121285] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff] [ 0.121289] pci 0000:00:1c.3: bridge window [mem 0xea100000-0xea1fffff] [ 0.121292] pci 0000:00:1c.3: bridge window [mem 0xea900000-0xeaafffff 64bit pref] [ 0.121296] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.121299] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.121302] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe8ffffff] [ 0.121305] pci 0000:00:1c.4: bridge window [mem 0xea000000-0xea0fffff 64bit pref] [ 0.121311] pci 0000:05:00.0: BAR 6: assigned [mem 0xe9000000-0xe900ffff pref] [ 0.121312] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.121314] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.121318] pci 0000:00:1c.5: bridge window [mem 0xe9000000-0xe9ffffff] [ 0.121321] pci 0000:00:1c.5: bridge window [mem 0xea200000-0xea2fffff 64bit pref] [ 0.121326] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 0.121330] pci 0000:00:1e.0: bridge window [mem 0xea300000-0xea3fffff] [ 0.121336] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.121338] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.121339] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.121341] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.121342] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window] [ 0.121344] pci_bus 0000:00: resource 9 [mem 0xcff00000-0xfebfffff window] [ 0.121346] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.121347] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe7ffffff] [ 0.121349] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.121350] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.121352] pci_bus 0000:02: resource 1 [mem 0xea500000-0xea6fffff] [ 0.121353] pci_bus 0000:02: resource 2 [mem 0xea700000-0xea8fffff 64bit pref] [ 0.121355] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.121356] pci_bus 0000:03: resource 1 [mem 0xea100000-0xea1fffff] [ 0.121358] pci_bus 0000:03: resource 2 [mem 0xea900000-0xeaafffff 64bit pref] [ 0.121360] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.121361] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe8ffffff] [ 0.121363] pci_bus 0000:04: resource 2 [mem 0xea000000-0xea0fffff 64bit pref] [ 0.121364] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.121366] pci_bus 0000:05: resource 1 [mem 0xe9000000-0xe9ffffff] [ 0.121367] pci_bus 0000:05: resource 2 [mem 0xea200000-0xea2fffff 64bit pref] [ 0.121369] pci_bus 0000:06: resource 1 [mem 0xea300000-0xea3fffff] [ 0.121370] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] [ 0.121372] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] [ 0.121374] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.121375] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.121377] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff window] [ 0.121378] pci_bus 0000:06: resource 9 [mem 0xcff00000-0xfebfffff window] [ 0.121457] NET: Registered protocol family 2 [ 0.121648] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.121660] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.121681] TCP: Hash tables configured (established 8192 bind 8192) [ 0.121715] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.121721] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.121764] NET: Registered protocol family 1 [ 0.160135] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.160139] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 0.160143] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 0.160152] PCI: CLS 32 bytes, default 64 [ 0.160200] Unpacking initramfs... [ 1.036732] Freeing initrd memory: 51368K [ 1.036945] Scanning for low memory corruption every 60 seconds [ 1.037627] Initialise system trusted keyrings [ 1.037638] Key type blacklist registered [ 1.037688] workingset: timestamp_bits=14 max_order=21 bucket_order=7 [ 1.039338] zbud: loaded [ 1.039708] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.039886] fuse init (API version 7.26) [ 1.041328] Key type asymmetric registered [ 1.041329] Asymmetric key parser 'x509' registered [ 1.041344] bounce: pool size: 64 pages [ 1.041356] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.041391] io scheduler noop registered [ 1.041392] io scheduler deadline registered [ 1.041451] io scheduler cfq registered (default) [ 1.042478] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.042479] vesafb: scrolling: redraw [ 1.042481] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.042498] vesafb: framebuffer at 0xe5000000, mapped to 0x(ptrval), using 3072k, total 3072k [ 1.042582] Console: switching to colour frame buffer device 128x48 [ 1.042606] fb0: VESA VGA frame buffer device [ 1.042624] intel_idle: does not run on family 6 model 23 [ 1.042713] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.042726] ACPI: Power Button [PWRB] [ 1.042778] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.042798] ACPI: Power Button [PWRF] [ 1.042881] tsc: Marking TSC unstable due to TSC halts in idle [ 1.043184] isapnp: Scanning for PnP cards... [ 1.043250] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.063673] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.065980] Linux agpgart interface v0.103 [ 1.093666] loop: module loaded [ 1.093877] libphy: Fixed MDIO Bus: probed [ 1.093878] tun: Universal TUN/TAP device driver, 1.6 [ 1.093915] PPP generic driver version 2.4.2 [ 1.093954] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.093957] ehci-pci: EHCI PCI platform driver [ 1.094069] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.094075] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.097975] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.097987] ehci-pci 0000:00:1a.7: irq 18, io mem 0xea405000 [ 1.112017] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.112059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.112061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.112063] usb usb1: Product: EHCI Host Controller [ 1.112064] usb usb1: Manufacturer: Linux 4.15.0-29-generic ehci_hcd [ 1.112066] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.112173] hub 1-0:1.0: USB hub found [ 1.112180] hub 1-0:1.0: 6 ports detected [ 1.112433] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.112437] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.116344] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.116358] ehci-pci 0000:00:1d.7: irq 23, io mem 0xea404000 [ 1.132019] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.132063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.132065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.132066] usb usb2: Product: EHCI Host Controller [ 1.132068] usb usb2: Manufacturer: Linux 4.15.0-29-generic ehci_hcd [ 1.132069] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.132161] hub 2-0:1.0: USB hub found [ 1.132167] hub 2-0:1.0: 6 ports detected [ 1.132325] ehci-platform: EHCI generic platform driver [ 1.132334] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.132336] ohci-pci: OHCI PCI platform driver [ 1.132347] ohci-platform: OHCI generic platform driver [ 1.132354] uhci_hcd: USB Universal Host Controller Interface driver [ 1.132437] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.132442] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.132447] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.132469] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 [ 1.132514] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.132516] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.132517] usb usb3: Product: UHCI Host Controller [ 1.132519] usb usb3: Manufacturer: Linux 4.15.0-29-generic uhci_hcd [ 1.132520] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.132613] hub 3-0:1.0: USB hub found [ 1.132619] hub 3-0:1.0: 2 ports detected [ 1.132799] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.132804] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.132809] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.132832] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100 [ 1.132874] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.132876] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.132878] usb usb4: Product: UHCI Host Controller [ 1.132879] usb usb4: Manufacturer: Linux 4.15.0-29-generic uhci_hcd [ 1.132880] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.132974] hub 4-0:1.0: USB hub found [ 1.132980] hub 4-0:1.0: 2 ports detected [ 1.133150] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.133154] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.133159] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.133175] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e200 [ 1.133219] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.133220] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.133222] usb usb5: Product: UHCI Host Controller [ 1.133223] usb usb5: Manufacturer: Linux 4.15.0-29-generic uhci_hcd [ 1.133225] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.133321] hub 5-0:1.0: USB hub found [ 1.133328] hub 5-0:1.0: 2 ports detected [ 1.133500] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.133504] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.133509] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.133525] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 1.133568] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.133570] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.133571] usb usb6: Product: UHCI Host Controller [ 1.133572] usb usb6: Manufacturer: Linux 4.15.0-29-generic uhci_hcd [ 1.133574] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.133666] hub 6-0:1.0: USB hub found [ 1.133672] hub 6-0:1.0: 2 ports detected [ 1.133842] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.133847] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.133852] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.133874] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 1.133921] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.133922] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.133924] usb usb7: Product: UHCI Host Controller [ 1.133925] usb usb7: Manufacturer: Linux 4.15.0-29-generic uhci_hcd [ 1.133927] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.134019] hub 7-0:1.0: USB hub found [ 1.134026] hub 7-0:1.0: 2 ports detected [ 1.134199] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.134204] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.134209] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.134225] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 1.134271] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.134273] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.134274] usb usb8: Product: UHCI Host Controller [ 1.134276] usb usb8: Manufacturer: Linux 4.15.0-29-generic uhci_hcd [ 1.134277] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.134369] hub 8-0:1.0: USB hub found [ 1.134375] hub 8-0:1.0: 2 ports detected [ 1.134520] i8042: PNP: No PS/2 controller found. [ 1.134520] i8042: Probing ports directly. [ 1.134939] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.134943] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.135058] mousedev: PS/2 mouse device common for all mice [ 1.135187] rtc_cmos 00:01: RTC can wake from S4 [ 1.135286] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.135307] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.135315] i2c /dev entries driver [ 1.135386] device-mapper: uevent: version 1.0.3 [ 1.135450] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.135472] platform eisa.0: Probing EISA bus 0 [ 1.135474] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.135476] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.135478] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.135479] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.135480] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.135482] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.135483] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.135485] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.135486] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.135488] platform eisa.0: EISA: Detected 0 cards [ 1.135493] cpufreq_nforce2: No nForce2 chipset [ 1.135563] ledtrig-cpu: registered to indicate activity on CPUs [ 1.135805] NET: Registered protocol family 10 [ 1.140110] Segment Routing with IPv6 [ 1.140132] NET: Registered protocol family 17 [ 1.140173] Key type dns_resolver registered [ 1.222719] microcode: sig=0x1067a, pf=0x1, revision=0xa07 [ 1.222752] microcode: Microcode Update Driver: v2.2. [ 1.222756] Using IPI No-Shortcut mode [ 1.222864] registered taskstats version 1 [ 1.222877] Loading compiled-in X.509 certificates [ 1.227802] Loaded X.509 cert 'Build time autogenerated kernel key: b45e7a9db0d51d18522aa5d8787168f26ec12103' [ 1.227815] zswap: loaded using pool lzo/zbud [ 1.231557] Key type big_key registered [ 1.231560] Key type trusted registered [ 1.233411] Key type encrypted registered [ 1.233413] AppArmor: AppArmor sha1 policy hashing enabled [ 1.233416] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.233435] evm: HMAC attrs: 0x1 [ 1.233701] Magic number: 10:98:870 [ 1.233740] acpi PNP0401:00: hash matches [ 1.233779] rtc_cmos 00:01: setting system clock to 2018-07-31 04:53:06 UTC (1533012786) [ 1.234006] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.234006] EDD information not available. [ 1.352734] isapnp: No Plug & Play device found [ 1.354374] Freeing unused kernel memory: 1088K [ 1.368083] Write protecting the kernel text: 8832k [ 1.368136] Write protecting the kernel read-only data: 3484k [ 1.368137] NX-protecting the kernel data: 7552k [ 1.368345] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.380550] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.380642] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.380667] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.381185] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.397469] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.404078] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.404430] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.405673] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.405752] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.406175] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.487640] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.487650] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.488069] r8169 0000:05:00.0 eth0: RTL8168c/8111c at 0x(ptrval), 00:1f:d0:81:b5:63, XID 1c4000c0 IRQ 24 [ 1.488071] r8169 0000:05:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 1.493138] ahci 0000:00:1f.2: version 3.0 [ 1.493227] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF [ 1.493293] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.493324] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 1.493326] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ccc ems [ 1.496056] scsi host0: pata_jmicron [ 1.503162] scsi host1: pata_jmicron [ 1.503208] ata1: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16 [ 1.503209] ata2: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16 [ 1.559474] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 1.568062] scsi host2: ahci [ 1.568247] scsi host3: ahci [ 1.568424] scsi host4: ahci [ 1.568596] scsi host5: ahci [ 1.568781] scsi host6: ahci [ 1.568956] scsi host7: ahci [ 1.569010] ata3: SATA max UDMA/133 abar m2048@0xea406000 port 0xea406100 irq 25 [ 1.569012] ata4: SATA max UDMA/133 abar m2048@0xea406000 port 0xea406180 irq 25 [ 1.569013] ata5: SATA max UDMA/133 abar m2048@0xea406000 port 0xea406200 irq 25 [ 1.569015] ata6: SATA max UDMA/133 abar m2048@0xea406000 port 0xea406280 irq 25 [ 1.569016] ata7: SATA max UDMA/133 abar m2048@0xea406000 port 0xea406300 irq 25 [ 1.569018] ata8: SATA max UDMA/133 abar m2048@0xea406000 port 0xea406380 irq 25 [ 1.579240] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.579243] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.579758] scsi host8: ahci [ 1.579927] scsi host9: ahci [ 1.579981] ata9: SATA max UDMA/133 abar m8192@0xea100000 port 0xea100100 irq 19 [ 1.579984] ata10: SATA max UDMA/133 abar m8192@0xea100000 port 0xea100180 irq 19 [ 1.584051] firewire_ohci 0000:06:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.592524] checking generic (e5000000 300000) vs hw (d0000000 10000000) [ 1.592526] checking generic (e5000000 300000) vs hw (e4000000 2000000) [ 1.592527] fb: switching to nouveaufb from VESA VGA [ 1.592551] Console: switching to colour dummy device 80x25 [ 1.592727] nouveau 0000:01:00.0: NVIDIA G94 (094100a1) [ 1.656074] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 1.706229] nouveau 0000:01:00.0: bios: version 62.94.21.00.00 [ 1.727564] nouveau 0000:01:00.0: fb: 512 MiB GDDR3 [ 1.764285] usb 6-2: new full-speed USB device number 2 using uhci_hcd [ 1.799822] [TTM] Zone kernel: Available graphics memory: 402718 kiB [ 1.799823] [TTM] Zone highmem: Available graphics memory: 4141698 kiB [ 1.799824] [TTM] Initializing pool allocator [ 1.799828] [TTM] Initializing DMA pool allocator [ 1.799840] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB [ 1.799841] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 1.799844] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 1.799845] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 1.799848] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000028 [ 1.799850] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030 [ 1.799851] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028 [ 1.799853] nouveau 0000:01:00.0: DRM: DCB outp 03: 02011312 00020030 [ 1.799855] nouveau 0000:01:00.0: DRM: DCB outp 04: 010223f1 00c0c080 [ 1.799857] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 1.799858] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002130 [ 1.799860] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000210 [ 1.799862] nouveau 0000:01:00.0: DRM: DCB conn 03: 00000211 [ 1.799863] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000213 [ 1.812319] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19 [ 1.812321] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing [ 1.812350] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.812351] [drm] Driver supports precise vblank timestamp query. [ 1.850594] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies [ 1.872034] usb 3-1: New USB device found, idVendor=04a9, idProduct=220d [ 1.872036] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.872038] usb 3-1: Product: CanoScan [ 1.872039] usb 3-1: Manufacturer: Canon [ 1.896175] ata9: SATA link down (SStatus 0 SControl 300) [ 1.896211] ata10: SATA link down (SStatus 0 SControl 300) [ 1.908256] nouveau 0000:01:00.0: DRM: allocated 1440x900 fb: 0x70000, bo (ptrval) [ 1.912146] fbcon: nouveaufb (fb0) is primary device [ 1.912362] Console: switching to colour frame buffer device 180x56 [ 1.912398] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 1.984029] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 2.016012] random: fast init done [ 2.039870] usb 6-2: New USB device found, idVendor=046d, idProduct=c52b [ 2.039872] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.039874] usb 6-2: Product: USB Receiver [ 2.039875] usb 6-2: Manufacturer: Logitech [ 2.040019] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.040826] ata3.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133 [ 2.040828] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.041530] ata3.00: configured for UDMA/133 [ 2.041658] scsi 2:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5 [ 2.041896] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.041898] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 2.041911] sd 2:0:0:0: [sda] Write Protect is off [ 2.041913] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.041934] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.042074] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.069074] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3d018124d, max_idle_ns: 440795353701 ns [ 2.078562] hidraw: raw HID events driver (C) Jiri Kosina [ 2.087130] sda: sda1 sda2 < sda5 > [ 2.087503] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.090226] usbcore: registered new interface driver usbhid [ 2.090226] usbhid: USB HID core driver [ 2.095221] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2 [ 2.112109] firewire_core 0000:06:07.0: created device fw0: GUID 00432c9f0000241d, S400 [ 2.230281] input: Logitech M325 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input5 [ 2.230616] logitech-hidpp-device 0003:046D:400A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:1d.0-2:1 [ 2.244273] input: Logitech K340 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/0003:046D:2007.0005/input/input6 [ 2.244339] logitech-hidpp-device 0003:046D:2007.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K340] on usb-0000:00:1d.0-2:2 [ 2.480030] usb 2-5: new high-speed USB device number 3 using ehci-pci [ 2.520034] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.521146] ata4.00: ATA-8: ST31000524AS, JC4B, max UDMA/133 [ 2.521147] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.522481] ata4.00: configured for UDMA/133 [ 2.522620] scsi 3:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5 [ 2.522836] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 2.522963] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.522977] sd 3:0:0:0: [sdb] Write Protect is off [ 2.522979] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.523000] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.539350] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.576029] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 2.638529] usb 2-5: New USB device found, idVendor=0c45, idProduct=6270 [ 2.638532] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.638534] usb 2-5: Product: USB20 Camera [ 2.772052] usb 4-1: New USB device found, idVendor=04a9, idProduct=1097 [ 2.772054] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.772056] usb 4-1: Product: iP5000 [ 2.772058] usb 4-1: Manufacturer: Canon [ 2.772060] usb 4-1: SerialNumber: 22D659 [ 2.996028] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.004076] ata5.00: ATAPI: HL-DT-ST BD-RE BH12LS38, 1.00, max UDMA/133 [ 3.008058] ata5.00: configured for UDMA/133 [ 3.017164] scsi 4:0:0:0: CD-ROM HL-DT-ST BD-RE BH12LS38 1.00 PQ: 0 ANSI: 5 [ 3.093169] sr 4:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.093171] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.093323] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 3.093406] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 3.568038] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.569153] ata6.00: HPA detected: current 1953523055, native 1953525168 [ 3.569156] ata6.00: ATA-8: ST31000524AS, JC4B, max UDMA/133 [ 3.569158] ata6.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.570494] ata6.00: configured for UDMA/133 [ 3.570609] scsi 5:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5 [ 3.570866] sd 5:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.570878] sd 5:0:0:0: [sdc] Write Protect is off [ 3.570880] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.570901] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 3.570911] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.585445] sd 5:0:0:0: [sdc] Attached SCSI disk [ 3.886437] ata7: SATA link down (SStatus 0 SControl 300) [ 4.360037] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.361183] ata8.00: HPA detected: current 1953523055, native 1953525168 [ 4.361186] ata8.00: ATA-8: ST31000524AS, JC4B, max UDMA/133 [ 4.361188] ata8.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.362557] ata8.00: configured for UDMA/133 [ 4.362684] scsi 7:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5 [ 4.362953] sd 7:0:0:0: [sdd] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB) [ 4.362973] sd 7:0:0:0: [sdd] Write Protect is off [ 4.362975] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 4.362976] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.363000] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.374825] sd 7:0:0:0: [sdd] Attached SCSI disk [ 4.476021] raid6: mmxx1 gen() 3376 MB/s [ 4.524008] raid6: mmxx2 gen() 3837 MB/s [ 4.572007] raid6: sse1x1 gen() 2309 MB/s [ 4.620041] raid6: sse1x2 gen() 3235 MB/s [ 4.668006] raid6: sse2x1 gen() 4271 MB/s [ 4.716006] raid6: sse2x1 xor() 4525 MB/s [ 4.764014] raid6: sse2x2 gen() 6067 MB/s [ 4.812010] raid6: sse2x2 xor() 5400 MB/s [ 4.812011] raid6: using algorithm sse2x2 gen() 6067 MB/s [ 4.812012] raid6: .... xor() 5400 MB/s, rmw enabled [ 4.812013] raid6: using ssse3x1 recovery algorithm [ 4.815743] xor: measuring software checksum speed [ 4.852006] pIII_sse : 9615.000 MB/sec [ 4.892006] prefetch64-sse: 10881.000 MB/sec [ 4.892007] xor: using function: prefetch64-sse (10881.000 MB/sec) [ 4.895392] async_tx: api initialized (async) [ 4.916645] md/raid:md126: device sdb operational as raid disk 0 [ 4.916646] md/raid:md126: device sdd operational as raid disk 2 [ 4.916947] md/raid:md126: raid level 5 active with 2 out of 3 devices, algorithm 0 [ 4.916971] md126: detected capacity change from 0 to 2000401989632 [ 5.402043] random: crng init done [ 5.662419] Btrfs loaded, crc32c=crc32c-generic [ 6.017377] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.964235] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 6.984075] systemd[1]: Detected architecture x86. [ 6.990098] systemd[1]: Set hostname to . [ 7.995955] systemd[1]: Reached target Remote File Systems (Pre). [ 7.996069] systemd[1]: Listening on Journal Socket. [ 7.996125] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 7.996165] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.996198] systemd[1]: Listening on udev Kernel Socket. [ 7.996302] systemd[1]: Created slice User and Session Slice. [ 7.996340] systemd[1]: Listening on LVM2 metadata daemon socket. [ 8.669716] lp: driver loaded but no devices found [ 8.684535] ppdev: user-space parallel port driver [ 8.776360] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.790701] parport_pc 00:03: reported by Plug and Play ACPI [ 8.790767] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 8.884087] lp0: using parport0 (interrupt-driven). [ 15.964746] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 15.990311] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 16.085289] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 16.095707] systemd-journald[431]: Received request to flush runtime journal from PID 1 [ 16.394288] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.405160] audit: type=1400 audit(1533012801.668:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=653 comm="apparmor_parser" [ 16.405163] audit: type=1400 audit(1533012801.668:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=653 comm="apparmor_parser" [ 16.410413] audit: type=1400 audit(1533012801.672:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=654 comm="apparmor_parser" [ 16.410416] audit: type=1400 audit(1533012801.672:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=654 comm="apparmor_parser" [ 16.410418] audit: type=1400 audit(1533012801.672:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=654 comm="apparmor_parser" [ 16.410420] audit: type=1400 audit(1533012801.672:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=654 comm="apparmor_parser" [ 16.414364] audit: type=1400 audit(1533012801.676:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=666 comm="apparmor_parser" [ 16.423068] audit: type=1400 audit(1533012801.684:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=673 comm="apparmor_parser" [ 16.423072] audit: type=1400 audit(1533012801.684:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=673 comm="apparmor_parser" [ 16.423077] audit: type=1400 audit(1533012801.684:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=673 comm="apparmor_parser" [ 16.575264] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170831/utaddress-247) [ 16.575271] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.575302] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 16.820095] usblp 4-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1097 [ 16.820124] usbcore: registered new interface driver usblp [ 16.866222] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889A: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 16.866224] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 16.866226] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 16.866228] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 16.866229] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0 [ 16.866230] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 16.866232] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 16.866234] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 16.866236] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 16.866237] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f [ 16.898376] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 16.898558] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 16.898741] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 16.898928] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 16.899108] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 16.899294] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 16.899478] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 16.899661] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 16.943247] intel_powerclamp: No package C-state available [ 16.953747] Adding 8385532k swap on /dev/sda5. Priority:-2 extents:1 across:8385532k FS [ 16.998190] new mount options do not match the existing superblock, will be ignored [ 17.017346] intel_powerclamp: No package C-state available [ 17.057841] gpio_ich: GPIO from 451 to 511 on gpio_ich [ 17.793596] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 17.809381] r8169 0000:05:00.0 enp5s0: link down [ 17.809382] r8169 0000:05:00.0 enp5s0: link down [ 17.809424] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 18.025496] media: Linux media interface: v0.10 [ 18.047169] Linux video capture interface: v2.00 [ 18.055919] gspca_main: v2.14.0 registered [ 18.060219] gspca_main: gspca_sn9c20x-2.14.0 probing 0c45:6270 [ 18.136284] gspca_sn9c20x: i2c_w error [ 19.176285] gspca_sn9c20x: MT9V112 sensor detected [ 19.176287] gspca_sn9c20x: MT9VPRB sensor detected [ 19.176388] input: gspca_sn9c20x as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/input/input15 [ 19.177243] usbcore: registered new interface driver gspca_sn9c20x [ 20.876469] r8169 0000:05:00.0 enp5s0: link up [ 20.876479] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready [ 22.420277] usblp1: removed [ 22.431364] usblp 4-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1097 [ 26.083241] vboxdrv: loading out-of-tree module taints kernel. [ 26.083477] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 26.091413] vboxdrv: Found 2 processor cores [ 26.091640] vboxdrv: fAsync=0 offMin=0x264 offMax=0x9ab [ 26.191774] vboxdrv: TSC mode is Synchronous, tentative frequency 2999661152 Hz [ 26.191775] vboxdrv: Successfully loaded version 5.1.38_Ubuntu (interface 0x002a0000) [ 26.198319] VBoxNetFlt: Successfully started. [ 26.204028] VBoxNetAdp: Successfully started. [ 26.209969] VBoxPciLinuxInit [ 26.215370] vboxpci: IOMMU not found (not registered) [ 26.742588] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 46.482000] [UFW BLOCK] IN=enp5s0 OUT= MAC=01:00:5e:00:00:fb:f0:24:75:3a:75:75:08:00 SRC=192.168.1.17 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=21093 PROTO=2 [ 2167.868553] [UFW BLOCK] IN=enp5s0 OUT= MAC=01:00:5e:00:00:fb:f0:24:75:3a:75:75:08:00 SRC=192.168.1.17 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=17008 PROTO=2 [ 2512.824083] logitech-hidpp-device 0003:046D:400A.0004: HID++ 2.0 device connected. [ 2526.918389] logitech-hidpp-device 0003:046D:2007.0005: HID++ 1.0 device connected.