[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-18-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 (Ubuntu 3.5.0-18.29-generic 3.5.7) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.5.0-18-generic root=/dev/mapper/jupiter-root ro quiet splash ipv6.disable=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfee1000-0x00000000dfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. X58A-UD3R/X58A-UD3R, BIOS F8b 10/07/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x320000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 100000000 mask F00000000 write-back [ 0.000000] 3 base 200000000 mask E00000000 write-back [ 0.000000] 4 base 300000000 mask FE0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 4GB, range: 4GB, type WB [ 0.000000] reg 3, base: 8GB, range: 8GB, type WB [ 0.000000] reg 4, base: 12GB, range: 512MB, type WB [ 0.000000] total RAM covered: 15872M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 4GB, range: 4GB, type WB [ 0.000000] reg 3, base: 8GB, range: 8GB, type WB [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5ee0-0x000f5eef] mapped at [ffff8800000f5ee0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdfedffff] [ 0.000000] [mem 0x00000000-0xdfdfffff] page 2M [ 0.000000] [mem 0xdfe00000-0xdfedffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xdfedffff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x31fffffff] [ 0.000000] [mem 0x100000000-0x31fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x31fffffff @ [mem 0xdfed2000-0xdfedffff] [ 0.000000] RAMDISK: [mem 0x35366000-0x369aafff] [ 0.000000] ACPI: RSDP 00000000000f7660 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000dfee1040 00044 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000dfee10c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000dfee1180 05975 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000dfee0000 00040 [ 0.000000] ACPI: MSDM 00000000dfee6cc0 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: HPET 00000000dfee6d80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000dfee6e00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 00000000dfee6e40 004D0 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000dfee7310 00CB2 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000dfee6b40 0012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000dfee8000 0352C (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000031fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x31fffffff] [ 0.000000] NODE_DATA [mem 0x31fffc000-0x31fffffff] [ 0.000000] [ffffea0000000000-ffffea000c7fffff] PMD -> [ffff880313600000-ffff88031f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x31fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xdfedffff] [ 0.000000] node 0: [mem 0x100000000-0x31fffffff] [ 0.000000] On node 0 totalpages: 3145325 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 896800 pages, LIFO batch:31 [ 0.000000] Normal zone: 34816 pages used for memmap [ 0.000000] Normal zone: 2193408 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee1000 [ 0.000000] PM: Registered nosave memory: 00000000dfee1000 - 00000000dfef0000 [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] e820: [mem 0xdff00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88031fc00000 s83584 r8192 d22912 u131072 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3094119 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.0-18-generic root=/dev/mapper/jupiter-root ro quiet splash ipv6.disable=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 12278156k/13107200k available (6717k kernel code, 525900k absent, 303144k reserved, 6453k data, 928k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:808 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 50331648 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2664.786 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5329.57 BogoMIPS (lpj=10659144) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000028] Security Framework initialized [ 0.000039] AppArmor: AppArmor initialized [ 0.000040] Yama: becoming mindful. [ 0.000962] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.003788] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004974] Mount-cache hash table entries: 256 [ 0.005141] Initializing cgroup subsys cpuacct [ 0.005143] Initializing cgroup subsys memory [ 0.005150] Initializing cgroup subsys devices [ 0.005151] Initializing cgroup subsys freezer [ 0.005152] Initializing cgroup subsys blkio [ 0.005153] Initializing cgroup subsys perf_event [ 0.005175] CPU: Physical Processor ID: 0 [ 0.005175] CPU: Processor Core ID: 0 [ 0.005179] mce: CPU supports 9 MCE banks [ 0.005188] CPU0: Thermal monitoring enabled (TM1) [ 0.005193] using mwait in idle threads. [ 0.006962] ACPI: Core revision 20120320 [ 0.012933] ftrace: allocating 25135 entries in 99 pages [ 0.023922] Switched APIC routing to physical flat. [ 0.024300] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063955] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 [ 0.169964] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver. [ 0.169968] CPU erratum AAJ80 worked around [ 0.169969] CPUID marked event: 'bus cycles' unavailable [ 0.169970] ... version: 3 [ 0.169971] ... bit width: 48 [ 0.169972] ... generic registers: 4 [ 0.169972] ... value mask: 0000ffffffffffff [ 0.169973] ... max period: 000000007fffffff [ 0.169974] ... fixed-purpose events: 3 [ 0.169975] ... event mask: 000000070000000f [ 0.170200] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.170306] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 [ 0.263295] Brought up 8 CPUs [ 0.263298] Total of 8 processors activated (42636.57 BogoMIPS). [ 0.269228] devtmpfs: initialized [ 0.270628] EVM: security.selinux [ 0.270629] EVM: security.SMACK64 [ 0.270630] EVM: security.capability [ 0.270666] PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee0fff] (4096 bytes) [ 0.271304] dummy: [ 0.271331] RTC time: 17:53:42, date: 11/07/12 [ 0.271362] NET: Registered protocol family 16 [ 0.271438] Trying to unpack rootfs image as initramfs... [ 0.271499] ACPI: bus type pci registered [ 0.271546] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.271548] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.275205] PCI: Using configuration type 1 for base access [ 0.276049] bio: create slab at 0 [ 0.276116] ACPI: Added _OSI(Module Device) [ 0.276117] ACPI: Added _OSI(Processor Device) [ 0.276118] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.276120] ACPI: Added _OSI(Processor Aggregator Device) [ 0.276837] ACPI: EC: Look up EC in DSDT [ 0.280034] ACPI Warning: Incorrect checksum in table [TAMG] - 0x8A, should be 0x89 (20120320/tbutils-323) [ 0.280798] ACPI: Interpreter enabled [ 0.280801] ACPI: (supports S0 S3 S4 S5) [ 0.280813] ACPI: Using IOAPIC for interrupt routing [ 0.283680] ACPI: No dock devices found. [ 0.283683] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.283719] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.283767] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.283769] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.283771] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.283772] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.283774] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff] [ 0.283800] PCI host bridge to bus 0000:00 [ 0.283802] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.283804] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.283805] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.283806] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.283808] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff] [ 0.283819] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000 [ 0.283869] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.283891] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 0.283944] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.283964] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400 [ 0.284017] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.284037] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 0.284089] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.284115] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000 [ 0.284175] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000 [ 0.284227] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000 [ 0.284287] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000 [ 0.284342] pci 0000:00:13.0: [8086:342d] type 00 class 0x080020 [ 0.284352] pci 0000:00:13.0: reg 10: [mem 0xfbfff000-0xfbffffff] [ 0.284396] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 0.284412] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 0.284474] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 0.284534] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 0.284595] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020 [ 0.284651] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.284691] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f] [ 0.284738] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.284777] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f] [ 0.284824] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.284862] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f] [ 0.284919] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.284938] pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff] [ 0.285023] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.285046] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.285060] pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit] [ 0.285122] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.285141] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.285206] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.285227] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400 [ 0.285292] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.285313] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400 [ 0.285378] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.285399] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 [ 0.285464] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.285487] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.285526] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f] [ 0.285573] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.285612] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f] [ 0.285661] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.285699] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f] [ 0.285755] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.285775] pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff] [ 0.285859] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.285883] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.285941] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 0.286017] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.286020] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.286066] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601 [ 0.286083] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907] [ 0.286090] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803] [ 0.286097] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707] [ 0.286104] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603] [ 0.286111] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf51f] [ 0.286118] pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff] [ 0.286161] pci 0000:00:1f.2: PME# supported from D3hot [ 0.286177] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.286190] pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit] [ 0.286209] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.286275] pci 0000:01:00.0: [1b4b:9128] type 00 class 0x010601 [ 0.286284] pci 0000:01:00.0: reg 10: [io 0xcf00-0xcf07] [ 0.286291] pci 0000:01:00.0: reg 14: [io 0xce00-0xce03] [ 0.286298] pci 0000:01:00.0: reg 18: [io 0xcd00-0xcd07] [ 0.286304] pci 0000:01:00.0: reg 1c: [io 0xcc00-0xcc03] [ 0.286311] pci 0000:01:00.0: reg 20: [io 0xcb00-0xcb0f] [ 0.286318] pci 0000:01:00.0: reg 24: [mem 0xfb9ff000-0xfb9ff7ff] [ 0.286325] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.286355] pci 0000:01:00.0: PME# supported from D3hot [ 0.293885] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.293889] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.293892] pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfb9fffff] [ 0.293942] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.293957] pci 0000:02:00.0: reg 10: [mem 0xfbbfe000-0xfbbfffff 64bit] [ 0.294033] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.301874] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.301879] pci 0000:00:02.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.301925] pci 0000:03:00.0: [10de:0dc4] type 00 class 0x030000 [ 0.301934] pci 0000:03:00.0: reg 10: [mem 0xf6000000-0xf6ffffff] [ 0.301944] pci 0000:03:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref] [ 0.301953] pci 0000:03:00.0: reg 1c: [mem 0xec000000-0xedffffff 64bit pref] [ 0.301960] pci 0000:03:00.0: reg 24: [io 0xdf00-0xdf7f] [ 0.301966] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.302020] pci 0000:03:00.1: [10de:0be9] type 00 class 0x040300 [ 0.302029] pci 0000:03:00.1: reg 10: [mem 0xf9ffc000-0xf9ffffff] [ 0.309870] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.309873] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 0.309876] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 0.309880] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.309917] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.309977] pci 0000:05:00.0: [197b:2363] type 00 class 0x010601 [ 0.310062] pci 0000:05:00.0: reg 24: [mem 0xfb8fe000-0xfb8fffff] [ 0.310123] pci 0000:05:00.0: PME# supported from D3hot [ 0.310154] pci 0000:05:00.1: [197b:2363] type 00 class 0x010185 [ 0.310177] pci 0000:05:00.1: reg 10: [io 0xbf00-0xbf07] [ 0.310190] pci 0000:05:00.1: reg 14: [io 0xbe00-0xbe03] [ 0.310202] pci 0000:05:00.1: reg 18: [io 0xbd00-0xbd07] [ 0.310215] pci 0000:05:00.1: reg 1c: [io 0xbc00-0xbc03] [ 0.310228] pci 0000:05:00.1: reg 20: [io 0xbb00-0xbb0f] [ 0.310308] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.310320] pci 0000:00:1c.1: PCI bridge to [bus 05-05] [ 0.310323] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 0.310326] pci 0000:00:1c.1: bridge window [mem 0xfb800000-0xfb8fffff] [ 0.310382] pci 0000:06:00.0: [197b:2363] type 00 class 0x010601 [ 0.310466] pci 0000:06:00.0: reg 24: [mem 0xfbefe000-0xfbefffff] [ 0.310526] pci 0000:06:00.0: PME# supported from D3hot [ 0.310557] pci 0000:06:00.1: [197b:2363] type 00 class 0x010185 [ 0.310580] pci 0000:06:00.1: reg 10: [io 0xaf00-0xaf07] [ 0.310593] pci 0000:06:00.1: reg 14: [io 0xae00-0xae03] [ 0.310606] pci 0000:06:00.1: reg 18: [io 0xad00-0xad07] [ 0.310618] pci 0000:06:00.1: reg 1c: [io 0xac00-0xac03] [ 0.310631] pci 0000:06:00.1: reg 20: [io 0xab00-0xab0f] [ 0.310712] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.310723] pci 0000:00:1c.3: PCI bridge to [bus 06-06] [ 0.310727] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff] [ 0.310730] pci 0000:00:1c.3: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.310786] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 [ 0.310801] pci 0000:07:00.0: reg 10: [io 0xee00-0xeeff] [ 0.310828] pci 0000:07:00.0: reg 18: [mem 0xfbcff000-0xfbcfffff 64bit pref] [ 0.310845] pci 0000:07:00.0: reg 20: [mem 0xfbcf8000-0xfbcfbfff 64bit pref] [ 0.310856] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.310918] pci 0000:07:00.0: supports D1 D2 [ 0.310920] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317866] pci 0000:00:1c.4: PCI bridge to [bus 07-07] [ 0.317870] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.317873] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.317878] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref] [ 0.317907] pci 0000:08:00.0: [1814:0601] type 00 class 0x028000 [ 0.317923] pci 0000:08:00.0: reg 10: [mem 0xfbaf0000-0xfbafffff] [ 0.318035] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode) [ 0.318040] pci 0000:00:1e.0: bridge window [mem 0xfba00000-0xfbafffff] [ 0.318045] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.318047] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.318048] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.318050] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.318051] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode) [ 0.318082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.318213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.318234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.318264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.318293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.318315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.318373] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.318376] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.318376] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.328457] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.328493] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.328526] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.328558] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.328590] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.328622] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 0.328654] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.328686] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.328767] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.328770] vgaarb: loaded [ 0.328771] vgaarb: bridge control possible 0000:03:00.0 [ 0.328895] SCSI subsystem initialized [ 0.328930] libata version 3.00 loaded. [ 0.328944] ACPI: bus type usb registered [ 0.328956] usbcore: registered new interface driver usbfs [ 0.328964] usbcore: registered new interface driver hub [ 0.328978] usbcore: registered new device driver usb [ 0.329032] PCI: Using ACPI for IRQ routing [ 0.330297] PCI: Discovered peer bus 3f [ 0.330298] PCI: root bus 3f: using default resources [ 0.330299] PCI: Probing PCI hardware (bus 3f) [ 0.330316] PCI host bridge to bus 0000:3f [ 0.330318] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 0.330320] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff] [ 0.330324] pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000 [ 0.330341] pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000 [ 0.330358] pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000 [ 0.330373] pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000 [ 0.330389] pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000 [ 0.330404] pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000 [ 0.330421] pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000 [ 0.330436] pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000 [ 0.330451] pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000 [ 0.330466] pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000 [ 0.330480] pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000 [ 0.330496] pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000 [ 0.330511] pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000 [ 0.330526] pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000 [ 0.330541] pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000 [ 0.330558] pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000 [ 0.330572] pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000 [ 0.330587] pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000 [ 0.330602] pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000 [ 0.330865] PCI: pci_cache_line_size set to 64 bytes [ 0.330990] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.330991] e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff] [ 0.331059] NetLabel: Initializing [ 0.331060] NetLabel: domain hash size = 128 [ 0.331061] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.331070] NetLabel: unlabeled traffic allowed by default [ 0.331113] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.331117] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.331120] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.343226] Switching to clocksource hpet [ 0.348004] AppArmor: AppArmor Filesystem Enabled [ 0.348022] pnp: PnP ACPI init [ 0.348033] ACPI: bus type pnp registered [ 0.348098] pnp 00:00: [bus 00-3f] [ 0.348100] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.348102] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.348103] pnp 00:00: [io 0x0d00-0xffff window] [ 0.348105] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.348106] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.348108] pnp 00:00: [mem 0xdff00000-0xfebfffff window] [ 0.348159] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.348224] pnp 00:01: [io 0x0010-0x001f] [ 0.348226] pnp 00:01: [io 0x0022-0x003f] [ 0.348227] pnp 00:01: [io 0x0044-0x005f] [ 0.348228] pnp 00:01: [io 0x0062-0x0063] [ 0.348229] pnp 00:01: [io 0x0065-0x006f] [ 0.348231] pnp 00:01: [io 0x0074-0x007f] [ 0.348232] pnp 00:01: [io 0x0091-0x0093] [ 0.348233] pnp 00:01: [io 0x00a2-0x00bf] [ 0.348235] pnp 00:01: [io 0x00e0-0x00ef] [ 0.348236] pnp 00:01: [io 0x04d0-0x04d1] [ 0.348237] pnp 00:01: [io 0x0290-0x029f] [ 0.348239] pnp 00:01: [io 0x0800-0x087f] [ 0.348240] pnp 00:01: [io 0x0290-0x0294] [ 0.348241] pnp 00:01: [io 0x0880-0x088f] [ 0.348301] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.348303] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.348305] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.348307] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.348308] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.348311] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348322] pnp 00:02: [dma 4] [ 0.348323] pnp 00:02: [io 0x0000-0x000f] [ 0.348324] pnp 00:02: [io 0x0080-0x0090] [ 0.348326] pnp 00:02: [io 0x0094-0x009f] [ 0.348327] pnp 00:02: [io 0x00c0-0x00df] [ 0.348349] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.348383] pnp 00:03: [irq 0 disabled] [ 0.348391] pnp 00:03: [irq 8] [ 0.348393] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.348415] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.348433] pnp 00:04: [io 0x0070-0x0073] [ 0.348456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.348462] pnp 00:05: [io 0x0061] [ 0.348485] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.348491] pnp 00:06: [io 0x00f0-0x00ff] [ 0.348496] pnp 00:06: [irq 13] [ 0.348518] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.348606] pnp 00:07: [io 0x0400-0x04cf] [ 0.348607] pnp 00:07: [io 0x04d2-0x04ff] [ 0.348653] system 00:07: [io 0x0400-0x04cf] has been reserved [ 0.348655] system 00:07: [io 0x04d2-0x04ff] has been reserved [ 0.348658] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348785] pnp 00:08: [mem 0xf0000000-0xf3ffffff] [ 0.348835] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.348837] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.348946] pnp 00:09: [mem 0x000d9000-0x000dbfff] [ 0.348947] pnp 00:09: [mem 0x000f0000-0x000f7fff] [ 0.348949] pnp 00:09: [mem 0x000f8000-0x000fbfff] [ 0.348950] pnp 00:09: [mem 0x000fc000-0x000fffff] [ 0.348952] pnp 00:09: [mem 0xdfee0000-0xdfeeffff] [ 0.348953] pnp 00:09: [mem 0x00000000-0x0009ffff] [ 0.348954] pnp 00:09: [mem 0x00100000-0xdfedffff] [ 0.348956] pnp 00:09: [mem 0xdfef0000-0xdfefffff] [ 0.348957] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.348958] pnp 00:09: [mem 0xfed10000-0xfed1dfff] [ 0.348960] pnp 00:09: [mem 0xfed20000-0xfed8ffff] [ 0.348961] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 0.348962] pnp 00:09: [mem 0xffb00000-0xffb7ffff] [ 0.348964] pnp 00:09: [mem 0xfff00000-0xffffffff] [ 0.348965] pnp 00:09: [mem 0x000e0000-0x000effff] [ 0.349029] system 00:09: [mem 0x000d9000-0x000dbfff] has been reserved [ 0.349031] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.349033] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.349034] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.349036] system 00:09: [mem 0xdfee0000-0xdfeeffff] could not be reserved [ 0.349038] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.349040] system 00:09: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.349041] system 00:09: [mem 0xdfef0000-0xdfefffff] has been reserved [ 0.349043] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.349045] system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.349047] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.349048] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.349050] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.349052] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved [ 0.349053] system 00:09: [mem 0x000e0000-0x000effff] has been reserved [ 0.349056] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.349070] pnp 00:0a: [mem 0xffb80000-0xffbfffff] [ 0.349099] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active) [ 0.349102] pnp: PnP ACPI: found 11 devices [ 0.349103] ACPI: ACPI bus type pnp unregistered [ 0.354941] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000 [ 0.354944] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000 [ 0.354946] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04-04] add_size 200000 [ 0.354955] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000 [ 0.354963] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-06] add_size 200000 [ 0.354986] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.354988] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.354990] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.354991] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.354993] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.354997] pci 0000:00:01.0: BAR 15: assigned [mem 0xdff00000-0xdfffffff pref] [ 0.354999] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4000000-0xf41fffff] [ 0.355001] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.355003] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref] [ 0.355005] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf4600000-0xf47fffff 64bit pref] [ 0.355007] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.355010] pci 0000:01:00.0: BAR 6: assigned [mem 0xdff00000-0xdff0ffff pref] [ 0.355012] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.355015] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.355018] pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfb9fffff] [ 0.355021] pci 0000:00:01.0: bridge window [mem 0xdff00000-0xdfffffff pref] [ 0.355025] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.355029] pci 0000:00:02.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.355035] pci 0000:03:00.0: BAR 6: assigned [mem 0xe8000000-0xe807ffff pref] [ 0.355036] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.355038] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 0.355042] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 0.355045] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.355049] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.355051] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.355055] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff] [ 0.355058] pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.355063] pci 0000:00:1c.1: PCI bridge to [bus 05-05] [ 0.355065] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 0.355069] pci 0000:00:1c.1: bridge window [mem 0xfb800000-0xfb8fffff] [ 0.355072] pci 0000:00:1c.1: bridge window [mem 0xf4400000-0xf45fffff 64bit pref] [ 0.355077] pci 0000:00:1c.3: PCI bridge to [bus 06-06] [ 0.355079] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff] [ 0.355083] pci 0000:00:1c.3: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.355086] pci 0000:00:1c.3: bridge window [mem 0xf4600000-0xf47fffff 64bit pref] [ 0.355091] pci 0000:07:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc1ffff pref] [ 0.355093] pci 0000:00:1c.4: PCI bridge to [bus 07-07] [ 0.355095] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.355099] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.355102] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref] [ 0.355107] pci 0000:00:1e.0: PCI bridge to [bus 08-08] [ 0.355110] pci 0000:00:1e.0: bridge window [mem 0xfba00000-0xfbafffff] [ 0.355135] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.355159] pci 0000:00:1e.0: setting latency timer to 64 [ 0.355162] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.355164] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.355165] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.355167] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.355168] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.355170] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.355171] pci_bus 0000:01: resource 1 [mem 0xfb900000-0xfb9fffff] [ 0.355173] pci_bus 0000:01: resource 2 [mem 0xdff00000-0xdfffffff pref] [ 0.355174] pci_bus 0000:02: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.355176] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.355178] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf9ffffff] [ 0.355179] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.355181] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.355182] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf41fffff] [ 0.355184] pci_bus 0000:04: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.355185] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff] [ 0.355187] pci_bus 0000:05: resource 1 [mem 0xfb800000-0xfb8fffff] [ 0.355188] pci_bus 0000:05: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref] [ 0.355190] pci_bus 0000:06: resource 0 [io 0xa000-0xafff] [ 0.355191] pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.355193] pci_bus 0000:06: resource 2 [mem 0xf4600000-0xf47fffff 64bit pref] [ 0.355194] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.355196] pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.355197] pci_bus 0000:07: resource 2 [mem 0xfbc00000-0xfbcfffff 64bit pref] [ 0.355199] pci_bus 0000:08: resource 1 [mem 0xfba00000-0xfbafffff] [ 0.355200] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] [ 0.355202] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] [ 0.355203] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] [ 0.355205] pci_bus 0000:08: resource 7 [mem 0x000c0000-0x000dffff] [ 0.355206] pci_bus 0000:08: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.355208] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] [ 0.355209] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff] [ 0.355242] NET: Registered protocol family 2 [ 0.355471] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.356310] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.357459] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.357591] TCP: Hash tables configured (established 524288 bind 65536) [ 0.357592] TCP: reno registered [ 0.357607] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.357657] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.357752] NET: Registered protocol family 1 [ 0.387289] pci 0000:03:00.0: Boot video device [ 0.387337] PCI: CLS 64 bytes, default 64 [ 0.387339] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.387340] software IO TLB [mem 0xdbed2000-0xdfed1fff] (64MB) mapped at [ffff8800dbed2000-ffff8800dfed1fff] [ 0.387853] audit: initializing netlink socket (disabled) [ 0.387865] type=2000 audit(1352310822.280:1): initialized [ 0.406825] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.408724] VFS: Disk quotas dquot_6.5.2 [ 0.408759] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.409119] fuse init (API version 7.19) [ 0.409174] msgmni has been set to 23980 [ 0.409399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.409417] io scheduler noop registered [ 0.409418] io scheduler deadline registered (default) [ 0.409437] io scheduler cfq registered [ 0.409667] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.409745] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.409822] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.409896] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.409954] ioapic: probe of 0000:00:13.0 failed with error -22 [ 0.409957] ioapic: probe of 0000:00:15.0 failed with error -22 [ 0.409964] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.409977] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.410015] intel_idle: MWAIT substates: 0x1120 [ 0.410024] intel_idle: v0.4 model 0x1A [ 0.410025] intel_idle: lapic_timer_reliable_states 0x2 [ 0.410109] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.410112] ACPI: Power Button [PWRB] [ 0.410144] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.410146] ACPI: Power Button [PWRF] [ 0.410197] ACPI: Requesting acpi_cpufreq [ 0.598132] Freeing initrd memory: 22804k freed [ 0.604101] GHES: HEST is not enabled! [ 0.604170] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.604991] Linux agpgart interface v0.103 [ 0.605964] brd: module loaded [ 0.606462] loop: module loaded [ 0.606539] ahci 0000:00:1f.2: version 3.0 [ 0.606590] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 0.606618] ahci: SSS flag set, parallel bus scan disabled [ 0.606655] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.606657] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems [ 0.606661] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.643336] scsi0 : ahci [ 0.643388] scsi1 : ahci [ 0.643431] scsi2 : ahci [ 0.643474] scsi3 : ahci [ 0.643516] scsi4 : ahci [ 0.643559] scsi5 : ahci [ 0.643647] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 44 [ 0.643649] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 44 [ 0.643651] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 44 [ 0.643653] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 44 [ 0.643654] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 44 [ 0.643656] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 44 [ 0.643704] ahci 0000:01:00.0: irq 45 for MSI/MSI-X [ 0.659063] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 0.659066] ahci 0000:01:00.0: flags: 64bit ncq pio [ 0.659659] scsi6 : ahci [ 0.659706] scsi7 : ahci [ 0.659754] scsi8 : ahci [ 0.659797] scsi9 : ahci [ 0.659843] scsi10 : ahci [ 0.659887] scsi11 : ahci [ 0.659934] scsi12 : ahci [ 0.659978] scsi13 : ahci [ 0.660005] ata7: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff100 irq 45 [ 0.660007] ata8: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff180 irq 45 [ 0.660009] ata9: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff200 irq 45 [ 0.660011] ata10: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff280 irq 45 [ 0.660013] ata11: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff300 irq 45 [ 0.660014] ata12: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff380 irq 45 [ 0.660016] ata13: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff400 irq 45 [ 0.660018] ata14: SATA max UDMA/133 abar m2048@0xfb9ff000 port 0xfb9ff480 irq 45 [ 0.675062] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.675065] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.675255] scsi14 : ahci [ 0.675304] scsi15 : ahci [ 0.675354] ata15: SATA max UDMA/133 abar m8192@0xfb8fe000 port 0xfb8fe100 irq 17 [ 0.675357] ata16: SATA max UDMA/133 abar m8192@0xfb8fe000 port 0xfb8fe180 irq 17 [ 0.691034] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.691037] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.691230] scsi16 : ahci [ 0.691276] scsi17 : ahci [ 0.691328] ata17: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 19 [ 0.691331] ata18: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 19 [ 0.691418] pata_acpi 0000:05:00.1: setting latency timer to 64 [ 0.691437] pata_acpi 0000:06:00.1: enabling device (0000 -> 0001) [ 0.691454] pata_acpi 0000:06:00.1: setting latency timer to 64 [ 0.691623] Fixed MDIO Bus: probed [ 0.691651] tun: Universal TUN/TAP device driver, 1.6 [ 0.691652] tun: (C) 1999-2004 Max Krasnyansky [ 0.691681] PPP generic driver version 2.4.2 [ 0.691712] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.691738] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.691740] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.691744] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.691766] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.695635] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.695648] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000 [ 0.706995] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.707010] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.707012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.707013] usb usb1: Product: EHCI Host Controller [ 0.707015] usb usb1: Manufacturer: Linux 3.5.0-18-generic ehci_hcd [ 0.707016] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.707082] hub 1-0:1.0: USB hub found [ 0.707085] hub 1-0:1.0: 6 ports detected [ 0.707154] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.707157] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.707161] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.707179] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.711065] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.711076] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000 [ 0.722984] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.722993] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.722995] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.722997] usb usb2: Product: EHCI Host Controller [ 0.722998] usb usb2: Manufacturer: Linux 3.5.0-18-generic ehci_hcd [ 0.723000] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.723060] hub 2-0:1.0: USB hub found [ 0.723063] hub 2-0:1.0: 6 ports detected [ 0.723120] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.723132] uhci_hcd: USB Universal Host Controller Interface driver [ 0.723147] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.723149] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.723153] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.723181] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 0.723202] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.723204] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.723205] usb usb3: Product: UHCI Host Controller [ 0.723207] usb usb3: Manufacturer: Linux 3.5.0-18-generic uhci_hcd [ 0.723208] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.723265] hub 3-0:1.0: USB hub found [ 0.723268] hub 3-0:1.0: 2 ports detected [ 0.723320] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.723323] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.723326] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.723355] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 0.723376] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.723377] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.723379] usb usb4: Product: UHCI Host Controller [ 0.723380] usb usb4: Manufacturer: Linux 3.5.0-18-generic uhci_hcd [ 0.723382] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.723436] hub 4-0:1.0: USB hub found [ 0.723439] hub 4-0:1.0: 2 ports detected [ 0.723488] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.723491] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.723494] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.723514] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 0.723536] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.723537] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.723539] usb usb5: Product: UHCI Host Controller [ 0.723540] usb usb5: Manufacturer: Linux 3.5.0-18-generic uhci_hcd [ 0.723542] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.723596] hub 5-0:1.0: USB hub found [ 0.723599] hub 5-0:1.0: 2 ports detected [ 0.723650] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.723652] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.723656] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.723677] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 0.723698] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.723699] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.723701] usb usb6: Product: UHCI Host Controller [ 0.723702] usb usb6: Manufacturer: Linux 3.5.0-18-generic uhci_hcd [ 0.723703] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.723758] hub 6-0:1.0: USB hub found [ 0.723761] hub 6-0:1.0: 2 ports detected [ 0.723811] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.723813] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.723817] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.723837] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 0.723859] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.723861] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.723862] usb usb7: Product: UHCI Host Controller [ 0.723863] usb usb7: Manufacturer: Linux 3.5.0-18-generic uhci_hcd [ 0.723865] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.723920] hub 7-0:1.0: USB hub found [ 0.723922] hub 7-0:1.0: 2 ports detected [ 0.723972] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.723974] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.723978] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.723998] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 0.724018] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.724020] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.724021] usb usb8: Product: UHCI Host Controller [ 0.724023] usb usb8: Manufacturer: Linux 3.5.0-18-generic uhci_hcd [ 0.724024] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.724081] hub 8-0:1.0: USB hub found [ 0.724084] hub 8-0:1.0: 2 ports detected [ 0.724155] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.724159] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 0.724265] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfbbfe000 [ 0.724304] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X [ 0.724309] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X [ 0.724314] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X [ 0.724319] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X [ 0.724326] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X [ 0.724330] xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X [ 0.724335] xhci_hcd 0000:02:00.0: irq 52 for MSI/MSI-X [ 0.724340] xhci_hcd 0000:02:00.0: irq 53 for MSI/MSI-X [ 0.724428] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.724430] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.724431] usb usb9: Product: xHCI Host Controller [ 0.724433] usb usb9: Manufacturer: Linux 3.5.0-18-generic xhci_hcd [ 0.724434] usb usb9: SerialNumber: 0000:02:00.0 [ 0.724475] xHCI xhci_add_endpoint called for root hub [ 0.724477] xHCI xhci_check_bandwidth called for root hub [ 0.724493] hub 9-0:1.0: USB hub found [ 0.724500] hub 9-0:1.0: 2 ports detected [ 0.724542] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.724544] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10 [ 0.727634] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.727636] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.727637] usb usb10: Product: xHCI Host Controller [ 0.727639] usb usb10: Manufacturer: Linux 3.5.0-18-generic xhci_hcd [ 0.727640] usb usb10: SerialNumber: 0000:02:00.0 [ 0.727684] xHCI xhci_add_endpoint called for root hub [ 0.727685] xHCI xhci_check_bandwidth called for root hub [ 0.727700] hub 10-0:1.0: USB hub found [ 0.727704] hub 10-0:1.0: 2 ports detected [ 0.727803] usbcore: registered new interface driver libusual [ 0.727823] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.728175] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.728180] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.728265] mousedev: PS/2 mouse device common for all mice [ 0.728353] rtc_cmos 00:04: RTC can wake from S4 [ 0.728451] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.728474] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.728525] device-mapper: uevent: version 1.0.3 [ 0.728566] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.728656] cpuidle: using governor ladder [ 0.728772] cpuidle: using governor menu [ 0.728773] EFI Variables Facility v0.08 2004-May-17 [ 0.728939] ashmem: initialized [ 0.729030] TCP: cubic registered [ 0.729032] IPv6: Loaded, but administratively disabled, reboot required to enable [ 0.729033] NET: Registered protocol family 17 [ 0.729042] Key type dns_resolver registered [ 0.729127] PM: Hibernation image not present or could not be loaded. [ 0.729136] registered taskstats version 1 [ 0.732213] Key type trusted registered [ 0.734755] Key type encrypted registered [ 0.738132] Magic number: 4:698:895 [ 0.738180] pci 0000:00:10.0: hash matches [ 0.738438] rtc_cmos 00:04: setting system clock to 2012-11-07 17:53:43 UTC (1352310823) [ 0.740064] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.740065] EDD information not available. [ 0.979068] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.979093] ata11: SATA link down (SStatus 0 SControl 300) [ 0.979118] ata13: SATA link down (SStatus 0 SControl 300) [ 0.979156] ata10: SATA link down (SStatus 0 SControl 300) [ 0.979172] ata12: SATA link down (SStatus 0 SControl 300) [ 0.979188] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 0.979412] ata14.00: configured for UDMA/66 [ 0.990987] ata9: SATA link down (SStatus 0 SControl 300) [ 0.991009] ata7: SATA link down (SStatus 0 SControl 300) [ 0.991029] ata8: SATA link down (SStatus 0 SControl 300) [ 0.995017] ata15: SATA link down (SStatus 0 SControl 300) [ 0.995138] ata16: SATA link down (SStatus 0 SControl 300) [ 1.006943] ata18: SATA link down (SStatus 0 SControl 300) [ 1.010928] ata17: SATA link down (SStatus 0 SControl 300) [ 1.134835] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.137525] ata1.00: ATAPI: ATAPI iHES108 2, 7L05, max UDMA/100 [ 1.139509] ata1.00: configured for UDMA/100 [ 1.144653] scsi 0:0:0:0: CD-ROM ATAPI iHES108 2 7L05 PQ: 0 ANSI: 5 [ 1.148282] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.148286] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.148613] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.148886] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.374661] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 1.386576] Refined TSC clocksource calibration: 2664.772 MHz. [ 1.386582] Switching to clocksource tsc [ 1.466596] ata2: SATA link down (SStatus 0 SControl 300) [ 1.542681] usb 3-2: New USB device found, idVendor=04a9, idProduct=220d [ 1.542686] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.542688] usb 3-2: Product: CanoScan [ 1.542691] usb 3-2: Manufacturer: Canon [ 1.782264] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 1.958283] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.960478] ata3.00: ATA-8: WDC WD1001FALS-00E3A0, 05.01D05, max UDMA/133 [ 1.960482] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.962752] ata3.00: configured for UDMA/133 [ 1.962920] scsi 2:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 [ 1.963197] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.963209] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.963447] sd 2:0:0:0: [sda] Write Protect is off [ 1.963454] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.963520] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.964542] usb 4-1: New USB device found, idVendor=046d, idProduct=c313 [ 1.964546] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.964549] usb 4-1: Product: USB Multimedia Keyboard [ 1.964551] usb 4-1: Manufacturer: LITEON Technology [ 1.984668] sda: sda1 sda2 < sda5 > [ 1.986244] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.205987] usb 4-2: new low-speed USB device number 3 using uhci_hcd [ 2.382230] usb 4-2: New USB device found, idVendor=046d, idProduct=c03e [ 2.382235] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.382238] usb 4-2: Product: USB-PS/2 Optical Mouse [ 2.382240] usb 4-2: Manufacturer: Logitech [ 2.453888] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.456477] ata4.00: ATA-8: WDC WD1001FALS-00E3A0, 05.01D05, max UDMA/133 [ 2.456481] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.458763] ata4.00: configured for UDMA/133 [ 2.458940] scsi 3:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 [ 2.459216] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.459236] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2.459552] sd 3:0:0:0: [sdb] Write Protect is off [ 2.459557] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.459751] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.480730] sdb: sdb1 [ 2.481073] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.949654] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.950546] ata5.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 2.950550] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.951557] ata5.00: configured for UDMA/133 [ 2.951731] scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 [ 2.951969] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.951991] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 2.952017] sd 4:0:0:0: [sdc] Write Protect is off [ 2.952021] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.952041] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.971950] sdc: unknown partition table [ 2.972097] sd 4:0:0:0: [sdc] Attached SCSI disk [ 3.269313] ata6: SATA link down (SStatus 0 SControl 300) [ 3.269747] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5 [ 3.270006] scsi 13:0:0:0: Attached scsi generic sg4 type 3 [ 3.272098] Freeing unused kernel memory: 928k freed [ 3.272214] Write protecting the kernel read-only data: 12288k [ 3.276244] Freeing unused kernel memory: 1464k freed [ 3.278811] Freeing unused kernel memory: 1120k freed [ 3.298644] udevd[158]: starting version 175 [ 3.323485] pata_jmicron 0000:05:00.1: setting latency timer to 64 [ 3.323744] scsi18 : pata_jmicron [ 3.323804] scsi19 : pata_jmicron [ 3.324212] ata19: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 18 [ 3.324214] ata20: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 18 [ 3.324258] pata_jmicron 0000:06:00.1: setting latency timer to 64 [ 3.325159] scsi20 : pata_jmicron [ 3.325249] scsi21 : pata_jmicron [ 3.325521] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.325616] r8169 0000:07:00.0: irq 54 for MSI/MSI-X [ 3.325733] ata21: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 16 [ 3.325736] ata22: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 16 [ 3.325741] r8169 0000:07:00.0: eth0: RTL8168d/8111d at 0xffffc900065f0000, 6c:f0:49:56:ba:76, XID 083000c0 IRQ 54 [ 3.325743] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.363547] usbcore: registered new interface driver usbhid [ 3.363550] usbhid: USB HID core driver [ 3.427185] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2 [ 3.427268] hid-generic 0003:046D:C313.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.1-1/input0 [ 3.433549] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input3 [ 3.433625] hid-generic 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.1-1/input1 [ 3.433736] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4 [ 3.434044] hid-generic 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-2/input0 [ 3.813053] Compat-wireless backport release: compat-wireless-v3.6.2-1-snpc [ 3.813055] Backport based on linux-stable.git v3.6.2 [ 3.813056] compat.git: linux-stable.git [ 3.814151] cfg80211: Calling CRDA to update world regulatory domain [ 3.825869] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 3.825872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.825873] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 3.825874] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.825876] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 3.825877] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.825878] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 3.825879] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.825880] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 3.825881] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.825882] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 3.825883] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.825887] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 3.825888] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.825890] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 3.825891] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.825892] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 3.825893] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.825894] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 3.825895] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.825896] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 3.825898] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.825899] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 3.825900] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 3.825901] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 3.825902] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 3.825903] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 3.825905] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 3.828137] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 3.828267] Registered led device: rt2800pci-phy0::radio [ 3.828281] Registered led device: rt2800pci-phy0::assoc [ 3.828293] Registered led device: rt2800pci-phy0::quality [ 9.496164] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 9.498132] XFS (dm-4): Mounting Filesystem [ 9.702666] XFS (dm-4): Ending clean mount [ 10.209887] init: ureadahead main process (491) terminated with status 5 [ 10.583254] Adding 3903484k swap on /dev/mapper/jupiter-swap. Priority:-1 extents:1 across:3903484k [ 10.706020] XFS (dm-12): Mounting Filesystem [ 10.825085] XFS (dm-12): Ending clean mount [ 10.843462] kjournald starting. Commit interval 5 seconds [ 10.843721] EXT3-fs (sda1): using internal journal [ 10.843725] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 10.874039] XFS (dm-5): Mounting Filesystem [ 10.957165] XFS (dm-5): Ending clean mount [ 10.991378] XFS (dm-10): Mounting Filesystem [ 11.120711] XFS (dm-10): Ending clean mount [ 11.458452] XFS (dm-11): Mounting Filesystem [ 11.729955] XFS (dm-11): Ending clean mount [ 11.799617] XFS (dm-6): Mounting Filesystem [ 12.128096] XFS (dm-6): Ending clean mount [ 12.137506] XFS (dm-7): Mounting Filesystem [ 12.257892] XFS (dm-7): Ending clean mount [ 12.272350] XFS (dm-8): Mounting Filesystem [ 12.343792] XFS (dm-8): Ending clean mount [ 12.381779] XFS (dm-9): Mounting Filesystem [ 12.465025] XFS (dm-9): Ending clean mount [ 12.501331] XFS (dm-0): Mounting Filesystem [ 12.633409] XFS (dm-0): Ending clean mount [ 12.646288] XFS (dm-1): Mounting Filesystem [ 12.805218] XFS (dm-1): Ending clean mount [ 12.842276] XFS (dm-2): Mounting Filesystem [ 12.943189] XFS (dm-2): Ending clean mount [ 12.965039] XFS (dm-3): Mounting Filesystem [ 13.062017] XFS (dm-3): Ending clean mount [ 13.086100] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 13.387400] udevd[715]: starting version 175 [ 14.089314] it87: Found IT8720F chip at 0x290, revision 8 [ 14.089321] it87: VID is disabled (pins used for GPIO) [ 14.089333] it87: Routing internal VCCH to in7 [ 14.089336] it87: Beeping is supported [ 16.533402] lp: driver loaded but no devices found [ 16.603958] ppdev: user-space parallel port driver [ 16.871216] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11 [ 17.000096] ACPI Warning: 0x00000000fed1f410-0x00000000fed1f414 SystemMemory conflicts with Region \RCRB 1 (20120320/utaddress-251) [ 17.000099] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.000100] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 17.000102] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20120320/utaddress-251) [ 17.000104] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.000146] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 17.051737] EDAC MC: Ver: 2.1.0 [ 17.063056] wmi: Mapper loaded [ 17.074279] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0 [ 17.074286] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED) [ 17.074290] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 17.103218] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11 [ 17.104219] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11 [ 17.105173] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11 [ 17.106092] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11 [ 17.107398] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11 [ 17.108148] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 17.108925] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11 [ 17.109835] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11 [ 17.110796] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 17.264884] gpio_ich: GPIO from 195 to 255 on gpio_ich [ 17.531639] nvidia: module license 'NVIDIA' taints kernel. [ 17.531642] Disabling lock debugging due to kernel taint [ 17.539322] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 17.539441] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.43 Sun Aug 19 20:14:03 PDT 2012 [ 17.914955] type=1400 audit(1352310840.686:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1022 comm="apparmor_parser" [ 17.915243] type=1400 audit(1352310840.686:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1022 comm="apparmor_parser" [ 17.915409] type=1400 audit(1352310840.686:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1022 comm="apparmor_parser" [ 18.362699] type=1400 audit(1352310841.134:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1048 comm="apparmor_parser" [ 18.363063] type=1400 audit(1352310841.134:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1048 comm="apparmor_parser" [ 19.161762] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X [ 19.286556] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 19.286675] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 19.286788] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 19.286906] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 19.287018] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 19.287132] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 19.287233] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 19.287340] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 19.287656] hda_intel: Disabling MSI [ 19.287670] hda-intel: 0000:03:00.1: Handle VGA-switcheroo audio client [ 20.101576] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.177318] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13 [ 20.177567] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14 [ 20.177745] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15 [ 20.177928] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16 [ 21.134415] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 21.134448] cfg80211: Pending regulatory request, waiting for it to be processed... [ 21.348446] wlan0: authenticate with 10:bf:48:d9:23:28 [ 21.364485] wlan0: direct probe to 10:bf:48:d9:23:28 (try 1/3) [ 21.551370] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 21.568258] wlan0: send auth to 10:bf:48:d9:23:28 (try 2/3) [ 21.569675] wlan0: authenticated [ 21.580197] wlan0: associate with 10:bf:48:d9:23:28 (try 1/3) [ 21.583008] wlan0: RX AssocResp from 10:bf:48:d9:23:28 (capab=0x431 status=0 aid=1) [ 21.583055] wlan0: associated [ 23.265935] init: failsafe main process (1133) killed by TERM signal [ 24.342062] type=1400 audit(1352310847.118:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1489 comm="apparmor_parser" [ 24.342375] type=1400 audit(1352310847.118:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1489 comm="apparmor_parser" [ 24.342542] type=1400 audit(1352310847.118:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1489 comm="apparmor_parser" [ 24.343037] type=1400 audit(1352310847.118:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1493 comm="apparmor_parser" [ 24.343385] type=1400 audit(1352310847.118:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1493 comm="apparmor_parser" [ 24.417325] type=1400 audit(1352310847.194:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1488 comm="apparmor_parser" [ 24.417572] type=1400 audit(1352310847.194:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1488 comm="apparmor_parser" [ 24.442727] type=1400 audit(1352310847.218:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1487 comm="apparmor_parser" [ 24.442975] type=1400 audit(1352310847.218:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1487 comm="apparmor_parser" [ 24.465674] type=1400 audit(1352310847.242:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1486 comm="apparmor_parser" [ 25.780815] init: udev-fallback-graphics main process (1542) terminated with status 1 [ 26.360424] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 26.360791] zram: Creating 8 devices ... [ 26.579354] init: gdm main process (1648) killed by TERM signal [ 26.683940] Adding 769028k swap on /dev/zram0. Priority:100 extents:1 across:769028k SS [ 26.684760] Adding 769028k swap on /dev/zram1. Priority:100 extents:1 across:769028k SS [ 26.685480] Adding 769028k swap on /dev/zram2. Priority:100 extents:1 across:769028k SS [ 26.686232] Adding 769028k swap on /dev/zram3. Priority:100 extents:1 across:769028k SS [ 26.686932] Adding 769028k swap on /dev/zram4. Priority:100 extents:1 across:769028k SS [ 26.687638] Adding 769028k swap on /dev/zram5. Priority:100 extents:1 across:769028k SS [ 26.688412] Adding 769028k swap on /dev/zram6. Priority:100 extents:1 across:769028k SS [ 26.689342] Adding 769028k swap on /dev/zram7. Priority:100 extents:1 across:769028k SS [ 26.823026] init: zram-config pre-start process (1624) terminated with status 1