[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-23-generic-pae (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #37-Ubuntu SMP Fri Jun 11 09:26:55 UTC 2010 (Ubuntu 2.6.32-23.37-generic-pae 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfff0000 (usable) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff3000 - 00000000d0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 base 0100000000 mask FFE0000000 write-back [ 0.000000] 4 base 0120000000 mask FFF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfff0000 (usable) [ 0.000000] modified: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS) [ 0.000000] modified: 00000000cfff3000 - 00000000d0000000 (ACPI data) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 00e00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 10000-16000 [ 0.000000] RAMDISK: 37860000 - 37fefe60 [ 0.000000] Allocated new RAMDISK: 0093c000 - 010cbe60 [ 0.000000] Move RAMDISK from 0000000037860000 - 0000000037fefe5f to 0093c000 - 010cbe5f [ 0.000000] ACPI: RSDP 000f8380 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT cfff3040 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP cfff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT cfff3180 06633 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS cfff0000 00040 [ 0.000000] ACPI: SSDT cfff98c0 00188 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: SRAT cfff9ac0 000C8 (v01 AMD HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: MCFG cfff9c00 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC cfff9800 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3974MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00012000 - 00018f40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00009337f8] TEXT DATA BSS ==> [0000100000 - 00009337f8] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [0000934000 - 000093b0b2] BRK ==> [0000934000 - 000093b0b2] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [000093c000 - 00010cbe60] NEW RAMDISK ==> [000093c000 - 00010cbe60] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f4250] f4250 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfff0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048447 [ 0.000000] free_area_init_node: node 0, pgdat c07d6d60, node_mem_map c10cd200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7949 pages used for memmap [ 0.000000] HighMem zone: 812773 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c3800000 s39480 r0 d21960 u1048576 [ 0.000000] pcpu-alloc: s39480 r0 d21960 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038718 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-23-generic-pae root=UUID=4b9960ed-7619-4726-8355-5a7fd9732bb1 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 24903360 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:00130000) [ 0.000000] Memory: 4112272k/4980736k available (4829k kernel code, 80416k reserved, 2216k data, 676k init, 3282888k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc07e2000 - 0xc088b000 ( 676 kB) [ 0.000000] .data : 0xc05b776b - 0xc07e17e8 (2216 kB) [ 0.000000] .text : 0xc0100000 - 0xc05b776b (4829 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2009.578 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4019.15 BogoMIPS (lpj=8038312) [ 0.008024] Security Framework initialized [ 0.008044] AppArmor: AppArmor initialized [ 0.008053] Mount-cache hash table entries: 512 [ 0.008177] Initializing cgroup subsys ns [ 0.008181] Initializing cgroup subsys cpuacct [ 0.008186] Initializing cgroup subsys memory [ 0.008192] Initializing cgroup subsys devices [ 0.008195] Initializing cgroup subsys freezer [ 0.008198] Initializing cgroup subsys net_cls [ 0.008216] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008218] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008221] CPU: Physical Processor ID: 0 [ 0.008223] CPU: Processor Core ID: 0 [ 0.008226] mce: CPU supports 5 MCE banks [ 0.008243] Performance Events: AMD PMU driver. [ 0.008247] ... version: 0 [ 0.008249] ... bit width: 48 [ 0.008251] ... generic registers: 4 [ 0.008253] ... value mask: 0000ffffffffffff [ 0.008255] ... max period: 00007fffffffffff [ 0.008258] ... fixed-purpose events: 0 [ 0.008259] ... event mask: 000000000000000f [ 0.008264] Checking 'hlt' instruction... OK. [ 0.026430] ACPI: Core revision 20090903 [ 0.036027] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036038] ftrace: allocating 22407 entries in 44 pages [ 0.040087] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040399] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.080380] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.012000] Initializing CPU#1 [ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012000] CPU: Physical Processor ID: 0 [ 0.012000] CPU: Processor Core ID: 1 [ 0.168087] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 [ 0.168112] Brought up 2 CPUs [ 0.168115] Total of 2 processors activated (8037.94 BogoMIPS). [ 0.168291] CPU0 attaching sched-domain: [ 0.168294] domain 0: span 0-1 level MC [ 0.168297] groups: 0 1 [ 0.168303] CPU1 attaching sched-domain: [ 0.168306] domain 0: span 0-1 level MC [ 0.168308] groups: 1 0 [ 0.168390] devtmpfs: initialized [ 0.168390] regulator: core version 0.5 [ 0.168390] Time: 21:01:52 Date: 06/14/10 [ 0.168390] NET: Registered protocol family 16 [ 0.168390] Trying to unpack rootfs image as initramfs... [ 0.168390] EISA bus registered [ 0.168390] ACPI: bus type pci registered [ 0.168390] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.168390] PCI: MCFG area at e0000000 reserved in E820 [ 0.168390] PCI: Using MMCONFIG for extended config space [ 0.168390] PCI: Using configuration type 1 for base access [ 0.172112] bio: create slab at 0 [ 0.173132] ACPI: EC: Look up EC in DSDT [ 0.181478] ACPI: Interpreter enabled [ 0.181484] ACPI: (supports S0 S1 S3 S4 S5) [ 0.181510] ACPI: Using IOAPIC for interrupt routing [ 0.190757] ACPI: No dock devices found. [ 0.191688] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.191793] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.191811] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc1f] [ 0.191820] pci 0000:00:01.1: reg 20 io port: [0xf800-0xf83f] [ 0.191825] pci 0000:00:01.1: reg 24 io port: [0xf400-0xf43f] [ 0.191836] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.191839] pci 0000:00:01.1: PME# disabled [ 0.191861] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.191879] pci 0000:00:02.0: supports D1 D2 [ 0.191882] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.191885] pci 0000:00:02.0: PME# disabled [ 0.191905] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 0.191927] pci 0000:00:02.1: supports D1 D2 [ 0.191929] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.191932] pci 0000:00:02.1: PME# disabled [ 0.191956] pci 0000:00:04.0: reg 10 io port: [0xf000-0xf0ff] [ 0.191960] pci 0000:00:04.0: reg 14 io port: [0xec00-0xecff] [ 0.191964] pci 0000:00:04.0: reg 18 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.191979] pci 0000:00:04.0: supports D1 D2 [ 0.192010] pci 0000:00:06.0: reg 20 io port: [0xe000-0xe00f] [ 0.192036] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7] [ 0.192041] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3] [ 0.192045] pci 0000:00:07.0: reg 18 io port: [0x970-0x977] [ 0.192049] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73] [ 0.192053] pci 0000:00:07.0: reg 20 io port: [0xcc00-0xcc0f] [ 0.192057] pci 0000:00:07.0: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.192081] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7] [ 0.192085] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3] [ 0.192089] pci 0000:00:08.0: reg 18 io port: [0x960-0x967] [ 0.192094] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63] [ 0.192098] pci 0000:00:08.0: reg 20 io port: [0xb800-0xb80f] [ 0.192102] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.192139] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe029000-0xfe029fff] [ 0.192143] pci 0000:00:0a.0: reg 14 io port: [0xb400-0xb407] [ 0.192160] pci 0000:00:0a.0: supports D1 D2 [ 0.192162] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192165] pci 0000:00:0a.0: PME# disabled [ 0.192200] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192203] pci 0000:00:0b.0: PME# disabled [ 0.192239] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192242] pci 0000:00:0c.0: PME# disabled [ 0.192279] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192282] pci 0000:00:0d.0: PME# disabled [ 0.192317] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192320] pci 0000:00:0e.0: PME# disabled [ 0.192434] pci 0000:01:09.0: reg 10 32bit mmio: [0xfdeff000-0xfdeff7ff] [ 0.192440] pci 0000:01:09.0: reg 14 io port: [0xac00-0xac7f] [ 0.192467] pci 0000:01:09.0: supports D2 [ 0.192470] pci 0000:01:09.0: PME# supported from D2 D3hot D3cold [ 0.192473] pci 0000:01:09.0: PME# disabled [ 0.192496] pci 0000:00:09.0: transparent bridge [ 0.192500] pci 0000:00:09.0: bridge io port: [0xa000-0xafff] [ 0.192503] pci 0000:00:09.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.192507] pci 0000:00:09.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.192541] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff] [ 0.192544] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.192549] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.192582] pci 0000:00:0c.0: bridge io port: [0x8000-0x8fff] [ 0.192585] pci 0000:00:0c.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.192589] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff] [ 0.192622] pci 0000:00:0d.0: bridge io port: [0x7000-0x7fff] [ 0.192625] pci 0000:00:0d.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff] [ 0.192629] pci 0000:00:0d.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff] [ 0.192653] pci 0000:05:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.192661] pci 0000:05:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.192668] pci 0000:05:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff] [ 0.192676] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.192726] pci 0000:00:0e.0: bridge io port: [0x6000-0x6fff] [ 0.192729] pci 0000:00:0e.0: bridge 32bit mmio: [0xfa000000-0xfcffffff] [ 0.192733] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.192743] pci_bus 0000:00: on NUMA node 0 [ 0.192748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.192967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.266213] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.266383] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.266553] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.266725] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.266892] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.267063] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.267231] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.267401] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.267570] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.267738] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.267909] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.268086] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.268255] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.268434] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.268615] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.268791] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.268916] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 0.269034] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 0.269153] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 0.269272] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 0.269390] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.269583] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.269776] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.269972] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.270164] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.270358] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.270554] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.270747] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.270939] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.271141] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.271343] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.271543] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.271676] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.271679] vgaarb: loaded [ 0.271797] SCSI subsystem initialized [ 0.271898] libata version 3.00 loaded. [ 0.271966] usbcore: registered new interface driver usbfs [ 0.271979] usbcore: registered new interface driver hub [ 0.272018] usbcore: registered new device driver usb [ 0.272164] ACPI: WMI: Mapper loaded [ 0.272167] PCI: Using ACPI for IRQ routing [ 0.272305] NetLabel: Initializing [ 0.272307] NetLabel: domain hash size = 128 [ 0.272309] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.272323] NetLabel: unlabeled traffic allowed by default [ 0.274342] AppArmor: AppArmor Filesystem Enabled [ 0.274363] pnp: PnP ACPI init [ 0.274379] ACPI: bus type pnp registered [ 0.280873] pnp: PnP ACPI: found 16 devices [ 0.280876] ACPI: ACPI bus type pnp unregistered [ 0.280880] PnPBIOS: Disabled by ACPI PNP [ 0.280897] system 00:00: ioport range 0x4000-0x407f has been reserved [ 0.280900] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 0.280903] system 00:00: ioport range 0x4400-0x447f has been reserved [ 0.280907] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 0.280910] system 00:00: ioport range 0x4800-0x487f has been reserved [ 0.280916] system 00:00: ioport range 0x4880-0x48ff has been reserved [ 0.280922] system 00:02: ioport range 0xb78-0xb7b has been reserved [ 0.280926] system 00:02: ioport range 0xf78-0xf7b has been reserved [ 0.280929] system 00:02: ioport range 0xa78-0xa7b has been reserved [ 0.280932] system 00:02: ioport range 0xe78-0xe7b has been reserved [ 0.280935] system 00:02: ioport range 0xbbc-0xbbf has been reserved [ 0.280938] system 00:02: ioport range 0xfbc-0xfbf has been reserved [ 0.280941] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.280944] system 00:02: ioport range 0x290-0x29f has been reserved [ 0.280947] system 00:02: ioport range 0x4e0-0x4e7 has been reserved [ 0.280957] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved [ 0.280963] system 00:0f: iomem range 0xd0000-0xd3fff has been reserved [ 0.280966] system 00:0f: iomem range 0xf0000-0xf7fff could not be reserved [ 0.280969] system 00:0f: iomem range 0xf8000-0xfbfff could not be reserved [ 0.280973] system 00:0f: iomem range 0xfc000-0xfffff could not be reserved [ 0.280976] system 00:0f: iomem range 0xcfff0000-0xcfffffff could not be reserved [ 0.280980] system 00:0f: iomem range 0xffff0000-0xffffffff has been reserved [ 0.280983] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 0.280986] system 00:0f: iomem range 0x100000-0xcffeffff could not be reserved [ 0.280989] system 00:0f: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.280993] system 00:0f: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.280996] system 00:0f: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.281000] system 00:0f: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.281003] system 00:0f: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.281006] system 00:0f: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.315670] Switching to clocksource acpi_pm [ 0.316097] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.316101] pci 0000:00:09.0: IO window: 0xa000-0xafff [ 0.316105] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff [ 0.316110] pci 0000:00:09.0: PREFETCH window: 0xfdf00000-0xfdffffff [ 0.316115] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.316119] pci 0000:00:0b.0: IO window: 0x9000-0x9fff [ 0.316123] pci 0000:00:0b.0: MEM window: 0xfdd00000-0xfddfffff [ 0.316128] pci 0000:00:0b.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff [ 0.316132] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.316136] pci 0000:00:0c.0: IO window: 0x8000-0x8fff [ 0.316140] pci 0000:00:0c.0: MEM window: 0xfdb00000-0xfdbfffff [ 0.316144] pci 0000:00:0c.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff [ 0.316148] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 [ 0.316152] pci 0000:00:0d.0: IO window: 0x7000-0x7fff [ 0.316156] pci 0000:00:0d.0: MEM window: 0xfd900000-0xfd9fffff [ 0.316160] pci 0000:00:0d.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff [ 0.316168] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05 [ 0.316171] pci 0000:00:0e.0: IO window: 0x6000-0x6fff [ 0.316175] pci 0000:00:0e.0: MEM window: 0xfa000000-0xfcffffff [ 0.316179] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.316188] pci 0000:00:09.0: setting latency timer to 64 [ 0.316195] pci 0000:00:0b.0: setting latency timer to 64 [ 0.316200] pci 0000:00:0c.0: setting latency timer to 64 [ 0.316206] pci 0000:00:0d.0: setting latency timer to 64 [ 0.316212] pci 0000:00:0e.0: setting latency timer to 64 [ 0.316216] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.316220] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.316224] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.316227] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.316230] pci_bus 0000:01: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.316234] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.316237] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.316240] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff] [ 0.316244] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.316247] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.316251] pci_bus 0000:03: resource 0 io: [0x8000-0x8fff] [ 0.316254] pci_bus 0000:03: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 0.316257] pci_bus 0000:03: resource 2 pref mem [0xfda00000-0xfdafffff] [ 0.316261] pci_bus 0000:04: resource 0 io: [0x7000-0x7fff] [ 0.316264] pci_bus 0000:04: resource 1 mem: [0xfd900000-0xfd9fffff] [ 0.316267] pci_bus 0000:04: resource 2 pref mem [0xfd800000-0xfd8fffff] [ 0.316271] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff] [ 0.316274] pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfcffffff] [ 0.316278] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.316318] NET: Registered protocol family 2 [ 0.316417] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.316766] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.317516] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.317929] TCP: Hash tables configured (established 131072 bind 65536) [ 0.317932] TCP reno registered [ 0.318037] NET: Registered protocol family 1 [ 0.336094] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336101] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 0.336108] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336113] pci 0000:00:0b.0: Linking AER extended capability [ 0.336153] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336158] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 0.336166] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336169] pci 0000:00:0c.0: Linking AER extended capability [ 0.336211] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336217] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 0.336224] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336227] pci 0000:00:0d.0: Linking AER extended capability [ 0.336273] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336279] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 0.336286] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336289] pci 0000:00:0e.0: Linking AER extended capability [ 0.336306] pci 0000:05:00.0: Boot video device [ 0.336510] cpufreq-nforce2: No nForce2 chipset. [ 0.336536] Scanning for low memory corruption every 60 seconds [ 0.336642] audit: initializing netlink socket (disabled) [ 0.336653] type=2000 audit(1276549312.333:1): initialized [ 0.347321] highmem bounce pool size: 64 pages [ 0.347327] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.348895] VFS: Disk quotas dquot_6.5.2 [ 0.348953] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.349545] fuse init (API version 7.13) [ 0.349635] msgmni has been set to 1622 [ 0.349862] alg: No test for stdrng (krng) [ 0.349918] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.349921] io scheduler noop registered [ 0.349923] io scheduler anticipatory registered [ 0.349925] io scheduler deadline registered [ 0.349969] io scheduler cfq registered (default) [ 0.350097] alloc irq_desc for 24 on node -1 [ 0.350100] alloc kstat_irqs on node -1 [ 0.350109] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X [ 0.350115] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.350182] alloc irq_desc for 25 on node -1 [ 0.350184] alloc kstat_irqs on node -1 [ 0.350189] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X [ 0.350194] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.350257] alloc irq_desc for 26 on node -1 [ 0.350259] alloc kstat_irqs on node -1 [ 0.350264] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X [ 0.350269] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.350332] alloc irq_desc for 27 on node -1 [ 0.350335] alloc kstat_irqs on node -1 [ 0.350340] pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X [ 0.350344] pcieport 0000:00:0e.0: setting latency timer to 64 [ 0.350405] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.350431] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.350548] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.350552] ACPI: Power Button [PWRB] [ 0.350618] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.350621] ACPI: Power Button [PWRF] [ 0.350682] fan PNP0C0B:00: registered as cooling_device0 [ 0.350688] ACPI: Fan [FAN] (on) [ 0.351283] processor LNXCPU:00: registered as cooling_device1 [ 0.351315] processor LNXCPU:01: registered as cooling_device2 [ 0.357425] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.357433] ACPI: Thermal Zone [THRM] (35 C) [ 0.358946] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.359037] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.359124] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.359391] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.359512] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.360653] brd: module loaded [ 0.361148] loop: module loaded [ 0.361260] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.361471] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.361924] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.361929] alloc irq_desc for 23 on node -1 [ 0.361932] alloc kstat_irqs on node -1 [ 0.361941] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.361958] pata_acpi 0000:00:07.0: setting latency timer to 64 [ 0.361966] pata_acpi 0000:00:07.0: PCI INT A disabled [ 0.362353] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.362356] alloc irq_desc for 22 on node -1 [ 0.362358] alloc kstat_irqs on node -1 [ 0.362364] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.362381] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 0.362388] pata_acpi 0000:00:08.0: PCI INT A disabled [ 0.362704] Fixed MDIO Bus: probed [ 0.362740] PPP generic driver version 2.4.2 [ 0.362778] tun: Universal TUN/TAP device driver, 1.6 [ 0.362780] tun: (C) 1999-2004 Max Krasnyansky [ 0.362872] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.363170] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 0.363173] alloc irq_desc for 21 on node -1 [ 0.363175] alloc kstat_irqs on node -1 [ 0.363181] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 0.363198] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.363201] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.363235] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.363262] ehci_hcd 0000:00:02.1: debug port 1 [ 0.363268] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.363286] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000 [ 0.363341] isapnp: Scanning for PnP cards... [ 0.397628] Freeing initrd memory: 7743k freed [ 0.412178] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.412273] usb usb1: configuration #1 chosen from 1 choice [ 0.412307] hub 1-0:1.0: USB hub found [ 0.412315] hub 1-0:1.0: 10 ports detected [ 0.412378] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.412732] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 0.412736] alloc irq_desc for 20 on node -1 [ 0.412738] alloc kstat_irqs on node -1 [ 0.412744] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 0.412754] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.412756] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.412798] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.412818] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000 [ 0.491179] usb usb2: configuration #1 chosen from 1 choice [ 0.491213] hub 2-0:1.0: USB hub found [ 0.491228] hub 2-0:1.0: 10 ports detected [ 0.491301] uhci_hcd: USB Universal Host Controller Interface driver [ 0.491405] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.493913] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.493921] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.494002] mice: PS/2 mouse device common for all mice [ 0.494106] rtc_cmos 00:04: RTC can wake from S4 [ 0.494149] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.494173] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.494277] device-mapper: uevent: version 1.0.3 [ 0.494395] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.494465] device-mapper: multipath: version 1.1.0 loaded [ 0.494469] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.494588] EISA: Probing bus 0 at eisa.0 [ 0.494603] Cannot allocate resource for EISA slot 4 [ 0.494608] Cannot allocate resource for EISA slot 6 [ 0.494611] Cannot allocate resource for EISA slot 7 [ 0.494614] Cannot allocate resource for EISA slot 8 [ 0.494616] EISA: Detected 0 cards. [ 0.494697] cpuidle: using governor ladder [ 0.494700] cpuidle: using governor menu [ 0.495178] TCP cubic registered [ 0.495336] NET: Registered protocol family 10 [ 0.495791] lo: Disabled Privacy Extensions [ 0.496117] NET: Registered protocol family 17 [ 0.496148] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [ 0.496194] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 [ 0.496197] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa [ 0.496200] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 0.499629] Using IPI No-Shortcut mode [ 0.499711] PM: Resume from disk failed. [ 0.499725] registered taskstats version 1 [ 0.499965] Magic number: 14:241:45 [ 0.500081] rtc_cmos 00:04: setting system clock to 2010-06-14 21:01:52 UTC (1276549312) [ 0.500085] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.500087] EDD information not available. [ 0.522944] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.717123] isapnp: No Plug & Play device found [ 0.717145] Freeing unused kernel memory: 676k freed [ 0.717628] Write protecting the kernel text: 4832k [ 0.717705] Write protecting the kernel read-only data: 1880k [ 0.737586] udev: starting version 151 [ 0.808079] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 0.826804] sata_nv 0000:00:07.0: version 3.5 [ 0.826821] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.826877] sata_nv 0000:00:07.0: setting latency timer to 64 [ 0.837204] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 0.837212] alloc irq_desc for 19 on node -1 [ 0.837215] alloc kstat_irqs on node -1 [ 0.837225] ohci1394 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 0.866269] Floppy drive(s): fd0 is 1.44M [ 0.870347] scsi0 : sata_nv [ 0.878467] scsi1 : sata_nv [ 0.878735] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 23 [ 0.878740] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 23 [ 0.878787] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.879118] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 0.879123] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 0.879128] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 0.879183] nv_probe: set workaround bit for reversed mac addr [ 0.884961] FDC 0 is a post-1991 82077 [ 0.895044] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 0.941167] usb 1-4: configuration #1 chosen from 1 choice [ 0.941384] hub 1-4:1.0: USB hub found [ 0.941436] hub 1-4:1.0: 4 ports detected [ 1.188033] ata1: SATA link down (SStatus 0 SControl 300) [ 1.244024] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 1.397083] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 1, addr 00:04:61:ac:46:43 [ 1.397088] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 1.397133] pata_amd 0000:00:06.0: version 0.4.1 [ 1.397183] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.397280] scsi2 : pata_amd [ 1.397356] scsi3 : pata_amd [ 1.398151] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14 [ 1.398154] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15 [ 1.398214] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 1.398259] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.398315] scsi4 : sata_nv [ 1.398381] scsi5 : sata_nv [ 1.398560] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 22 [ 1.398564] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 22 [ 1.459147] usb 2-2: configuration #1 chosen from 1 choice [ 1.501028] ata2: SATA link down (SStatus 0 SControl 300) [ 1.568451] usb 1-4.1: new full speed USB device using ehci_hcd and address 4 [ 1.681417] usb 1-4.1: configuration #1 chosen from 1 choice [ 1.689492] usbcore: registered new interface driver hiddev [ 1.698305] generic-usb 0003:0665:5161.0001: hiddev96,hidraw0: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:02.0-2/input0 [ 1.701608] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input4 [ 1.701711] generic-usb 0003:046D:C049.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:02.1-4.1/input0 [ 1.703886] generic-usb 0003:046D:C049.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:02.1-4.1/input1 [ 1.703910] usbcore: registered new interface driver usbhid [ 1.703914] usbhid: v2.6:USB HID core driver [ 1.756258] ata4.00: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS08, max UDMA/33 [ 1.756294] ata4.01: ATAPI: Hewlett-Packard CD-Writer Plus 9300, 1.0b, max UDMA/33 [ 1.756323] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f) [ 1.756329] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f) [ 1.768446] usb 1-4.2: new low speed USB device using ehci_hcd and address 5 [ 1.796225] ata4.00: configured for UDMA/33 [ 1.812224] ata4.01: configured for UDMA/33 [ 1.814117] scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S162L TS08 PQ: 0 ANSI: 5 [ 1.822090] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.822093] Uniform CD-ROM driver Revision: 3.20 [ 1.822216] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.822280] sr 3:0:0:0: Attached scsi generic sg0 type 5 [ 1.826859] scsi 3:0:1:0: CD-ROM HP CD-Writer+ 9300 1.0b PQ: 0 ANSI: 5 [ 1.831908] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 1.831999] sr 3:0:1:0: Attached scsi CD-ROM sr1 [ 1.832067] sr 3:0:1:0: Attached scsi generic sg1 type 5 [ 1.864027] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.872218] ata5.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7 [ 1.872222] ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.880232] ata5.00: configured for UDMA/133 [ 1.880326] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 1.880461] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1.880567] sd 4:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.880612] sd 4:0:0:0: [sda] Write Protect is off [ 1.880615] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.880639] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.881144] sda: [ 1.897403] usb 1-4.2: configuration #1 chosen from 1 choice [ 1.902051] sda1 sda2 < [ 1.908905] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.2/1-4.2:1.0/input/input5 [ 1.909151] microsoft 0003:045E:00DB.0004: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:02.1-4.2/input0 [ 1.919787] sda5 > sda3 [ 1.920207] sd 4:0:0:0: [sda] Attached SCSI disk [ 1.921072] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.2/1-4.2:1.1/input/input6 [ 1.921272] microsoft 0003:045E:00DB.0005: input,hidraw4: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:02.1-4.2/input1 [ 2.151974] EXT4-fs (sda3): INFO: recovery required on readonly filesystem [ 2.151981] EXT4-fs (sda3): write access will be enabled during recovery [ 2.172253] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00046100000cfeee] [ 2.348026] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.356218] ata6.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7 [ 2.356222] ata6.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.364233] ata6.00: configured for UDMA/133 [ 2.364338] scsi 5:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 [ 2.364482] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.364527] sd 5:0:0:0: [sdb] Write Protect is off [ 2.364530] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.364554] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.364755] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 2.364951] sdb: sdb1 [ 2.375354] sd 5:0:0:0: [sdb] Attached SCSI disk [ 4.328561] EXT4-fs (sda3): orphan cleanup on readonly fs [ 4.341442] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14552469 [ 4.341532] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14552467 [ 4.341568] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14552297 [ 4.341591] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 14552463 [ 4.355194] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 31064253 [ 4.355245] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 31064227 [ 4.355263] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 31064225 [ 4.355306] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 31064221 [ 4.355327] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 31064189 [ 4.355346] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 31064179 [ 4.355363] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 31064175 [ 4.355381] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 31064173 [ 4.355400] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 31064127 [ 4.355418] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 31064121 [ 4.355436] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 31064113 [ 4.355490] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 31064151 [ 4.355532] EXT4-fs (sda3): 16 orphan inodes deleted [ 4.355536] EXT4-fs (sda3): recovery complete [ 4.623009] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 6.021446] Adding 5855684k swap on /dev/sda5. Priority:-1 extents:1 across:5855684k [ 6.297436] udev: starting version 151 [ 6.848573] type=1505 audit(1276570918.847:2): operation="profile_load" pid=536 name="/sbin/dhclient3" [ 6.848858] type=1505 audit(1276570918.847:3): operation="profile_load" pid=536 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 6.849017] type=1505 audit(1276570918.847:4): operation="profile_load" pid=536 name="/usr/lib/connman/scripts/dhclient-script" [ 7.415783] lp: driver loaded but no devices found [ 7.711270] parport_pc 00:0a: reported by Plug and Play ACPI [ 7.711323] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 7.791865] ppdev: user-space parallel port driver [ 7.805241] lp0: using parport0 (interrupt-driven). [ 7.825542] gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 59659kHz [ 7.830756] i2c i2c-0: nForce2 SMBus adapter at 0xf800 [ 7.830791] i2c i2c-1: nForce2 SMBus adapter at 0xf400 [ 7.895690] psmouse serio1: ID: 00 00 0a [ 8.116695] vga16fb: initializing [ 8.116701] vga16fb: mapped to 0xc00a0000 [ 8.116779] fb0: VGA16 VGA frame buffer device [ 8.136316] Linux agpgart interface v0.103 [ 8.564074] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7 [ 8.981872] nvidia: module license 'NVIDIA' taints kernel. [ 8.981877] Disabling lock debugging due to kernel taint [ 10.339379] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 10.339386] alloc irq_desc for 18 on node -1 [ 10.339389] alloc kstat_irqs on node -1 [ 10.339399] nvidia 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 10.339408] nvidia 0000:05:00.0: setting latency timer to 64 [ 10.339413] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 10.339809] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010 [ 10.720547] Console: switching to colour frame buffer device 80x30 [ 10.869303] w83627hf: Found W83627THF chip at 0x290 [ 10.869342] ACPI: resource w83627hf [0x295-0x296] conflicts with ACPI region SEN1 [0x295-0x296] [ 10.869345] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.317165] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 11.317174] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 11.317211] Intel ICH 0000:00:04.0: setting latency timer to 64 [ 11.640028] intel8x0_measure_ac97_clock: measured 54700 usecs (2688 samples) [ 11.640032] intel8x0: clocking to 46886 [ 12.196506] type=1505 audit(1276570924.195:5): operation="profile_load" pid=901 name="/usr/sbin/mysqld" [ 13.420518] type=1505 audit(1276570925.419:6): operation="profile_load" pid=1015 name="/usr/share/gdm/guest-session/Xsession" [ 13.422485] type=1505 audit(1276570925.419:7): operation="profile_replace" pid=1016 name="/sbin/dhclient3" [ 13.422771] type=1505 audit(1276570925.419:8): operation="profile_replace" pid=1016 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.422941] type=1505 audit(1276570925.419:9): operation="profile_replace" pid=1016 name="/usr/lib/connman/scripts/dhclient-script" [ 13.484854] type=1505 audit(1276570925.483:10): operation="profile_load" pid=1017 name="/usr/bin/evince" [ 13.488809] type=1505 audit(1276570925.487:11): operation="profile_load" pid=1017 name="/usr/bin/evince-previewer" [ 13.491158] type=1505 audit(1276570925.487:12): operation="profile_load" pid=1017 name="/usr/bin/evince-thumbnailer" [ 13.605369] type=1505 audit(1276570925.603:13): operation="profile_load" pid=1019 name="/usr/lib/cups/backend/cups-pdf" [ 13.605732] type=1505 audit(1276570925.603:14): operation="profile_load" pid=1019 name="/usr/sbin/cupsd"