X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux speedwell-linux 2.6.31-11-generic #38-Ubuntu SMP Fri Oct 2 11:55:55 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-11-generic root=UUID=be0c9930-0d3c-4c67-9578-efee7b09b08c ro quiet splash
Build Date: 28 September 2009  10:13:57AM
xorg-server 2:1.6.3-1ubuntu7 (buildd@rothera.buildd) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct  5 17:25:25 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
	Using the first device section listed.
(**) |   |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(--) using VT number 9

(--) PCI:*(0:7:0:0) 10de:014d:10de:0349 nVidia Corporation NV43GL [Quadro FX 550] rev 162, Mem @ 0xd8000000/67108864, 0xc8000000/134217728, 0xde000000/16777216, BIOS @ 0x????????/131072
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA GLX Module  185.18.36  Fri Aug 14 17:50:12 PDT 2009
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.13.0
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.1.0
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA dlloader X Driver  185.18.36  Fri Aug 14 17:24:40 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
(II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU Quadro FX 550 (NV43GL) at PCI:7:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.43.02.97.01
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on Quadro FX 550 at PCI:7:0:0:
(--) NVIDIA(0):     DELL 1707FP (DFP-0)
(--) NVIDIA(0):     DELL 1707FP (DFP-1)
(--) NVIDIA(0): DELL 1707FP (DFP-0): 155.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL 1707FP (DFP-0): Internal Single Link TMDS
(--) NVIDIA(0): DELL 1707FP (DFP-1): 155.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL 1707FP (DFP-1): Internal Single Link TMDS
(WW) NVIDIA(0): No TwinView "MetaModes" specified; will fall back to Display
(WW) NVIDIA(0):     SubSection modes.
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Assigned Display Devices: DFP-0, DFP-1
(==) NVIDIA(0): 
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0): 
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 2560 x 1024
(--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(WW) NVIDIA(0): UBB is incompatible with the Composite extension.  Disabling
(WW) NVIDIA(0):     UBB.
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(==) RandR enabled
(II) Initializing extension GLX
(II) config/hal: Adding input device Wacom Intuos3 6x11
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
(II) Wacom driver level: 47-0.8.4-1 $
(**) Wacom Intuos3 6x11: always reports core events
(**) Wacom Intuos3 6x11 device is /dev/input/event6
(**) Wacom Intuos3 6x11 is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Intuos3 6x11: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 6x11" (type: Wacom Stylus)
Wacom Intuos3 6x11 Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 61 for button 1
(==) Wacom USB Intuos3 tablet speed=9600 (38400) maxX=54204 maxY=31750 maxZ=1023 resX=5080 resY=5080  tilt=enabled
(==) Wacom device "Wacom Intuos3 6x11" top X=0 top Y=0 bottom X=54204 bottom Y=31750 resol X=5080 resol Y=5080
(II) config/hal: Adding input device Wacom Intuos3 6x11 pad
(**) Wacom Intuos3 6x11 pad: always reports core events
(**) Wacom Intuos3 6x11 pad device is /dev/input/event6
(**) Wacom Intuos3 6x11 pad is in relative mode
(**) WACOM: suppress value is 2
FATAL: Module evdev not found.
(**) Wacom Intuos3 6x11 pad: reading USB link
(**) Wacom Intuos3 6x11 pad: threshold = 61
(**) Wacom Intuos3 6x11 pad: max x set to 54204 by xorg.conf
(**) Wacom Intuos3 6x11 pad: max y set to 31750 by xorg.conf
(**) Wacom Intuos3 6x11 pad: max z = 1023
(**) Wacom Intuos3 6x11 pad: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 6x11 pad" (type: Wacom Pad)
(==) Wacom device "Wacom Intuos3 6x11 pad" top X=0 top Y=0 bottom X=54204 bottom Y=31750 resol X=5080 resol Y=5080
(II) config/hal: Adding input device Wacom Intuos3 6x11 cursor
(**) Wacom Intuos3 6x11 cursor: always reports core events
(**) Wacom Intuos3 6x11 cursor device is /dev/input/event6
(**) Wacom Intuos3 6x11 cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Intuos3 6x11 cursor: reading USB link
(**) Wacom Intuos3 6x11 cursor: threshold = 61
(**) Wacom Intuos3 6x11 cursor: max x set to 54204 by xorg.conf
(**) Wacom Intuos3 6x11 cursor: max y set to 31750 by xorg.conf
(**) Wacom Intuos3 6x11 cursor: max z = 1023
(**) Wacom Intuos3 6x11 cursor: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 6x11 cursor" (type: Wacom Cursor)
(==) Wacom device "Wacom Intuos3 6x11 cursor" top X=0 top Y=0 bottom X=54204 bottom Y=31750 resol X=5080 resol Y=5080
(II) config/hal: Adding input device Wacom Intuos3 6x11 eraser
(**) Wacom Intuos3 6x11 eraser: always reports core events
(**) Wacom Intuos3 6x11 eraser device is /dev/input/event6
(**) Wacom Intuos3 6x11 eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Intuos3 6x11 eraser: reading USB link
(**) Wacom Intuos3 6x11 eraser: threshold = 61
(**) Wacom Intuos3 6x11 eraser: max x set to 54204 by xorg.conf
(**) Wacom Intuos3 6x11 eraser: max y set to 31750 by xorg.conf
(**) Wacom Intuos3 6x11 eraser: max z = 1023
(**) Wacom Intuos3 6x11 eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 6x11 eraser" (type: Wacom Eraser)
(==) Wacom device "Wacom Intuos3 6x11 eraser" top X=0 top Y=0 bottom X=54204 bottom Y=31750 resol X=5080 resol Y=5080
(II) config/hal: Adding input device Power Button
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.2.5
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(II) config/hal: Adding input device Dell Dell USB Keyboard
(**) Dell Dell USB Keyboard: always reports core events
(**) Dell Dell USB Keyboard: Device: "/dev/input/event4"
(II) Dell Dell USB Keyboard: Found keys
(II) Dell Dell USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD)
(II) config/hal: Adding input device Dell Dell USB Keyboard
(**) Dell Dell USB Keyboard: always reports core events
(**) Dell Dell USB Keyboard: Device: "/dev/input/event5"
(II) Dell Dell USB Keyboard: Found keys
(II) Dell Dell USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD)
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device USB Optical Mouse
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event3"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(**) USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) USB Optical Mouse: (accel) filter chain progression: 2.00
(**) USB Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) USB Optical Mouse: (accel) set acceleration profile 0
(II) USB Optical Mouse: initialized for relative axes.