Dumping 141 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
  info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
  info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
  info.capabilities = {'cpufreq_control'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
  info.product = 'Computer'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
  power_management.acpi.linux.version = '20080926'  (string)
  power_management.can_hibernate = true  (bool)
  power_management.can_suspend = false  (bool)
  power_management.can_suspend_hybrid = false  (bool)
  power_management.is_powersave_set = false  (bool)
  power_management.quirk.vbe_post = true  (bool)
  power_management.type = 'acpi'  (string)
  system.board.product = 'TF 570 SLI'  (string)
  system.board.serial = ''  (string)
  system.board.vendor = 'Biostar'  (string)
  system.board.version = ''  (string)
  system.chassis.manufacturer = 'Biostar'  (string)
  system.chassis.type = 'Desktop'  (string)
  system.firmware.release_date = '11/05/2007'  (string)
  system.firmware.vendor = 'Phoenix Technologies, LTD'  (string)
  system.firmware.version = '6.00 PG'  (string)
  system.formfactor = 'desktop'  (string)
  system.hardware.primary_video.product = 1026  (0x402)  (int)
  system.hardware.primary_video.vendor = 4318  (0x10de)  (int)
  system.hardware.product = 'TF 570 SLI'  (string)
  system.hardware.serial = ''  (string)
  system.hardware.uuid = '5B83304D-E000-FFFF-FFFF-FFFFFFFFFFFF'  (string)
  system.hardware.vendor = 'Biostar'  (string)
  system.hardware.version = ''  (string)
  system.kernel.machine = 'x86_64'  (string)
  system.kernel.name = 'Linux'  (string)
  system.kernel.version = '2.6.28-11-generic'  (string)
  system.kernel.version.major = 2  (0x2)  (int)
  system.kernel.version.micro = 28  (0x1c)  (int)
  system.kernel.version.minor = 6  (0x6)  (int)

udi = '/org/freedesktop/Hal/devices/net_3e_44_6e_e4_a6_3d'
  info.capabilities = {'net', 'net.bridge'} (string list)
  info.category = 'net.bridge'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Bridge Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_3e_44_6e_e4_a6_3d'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/virtual/net/pan0'  (string)
  net.address = '3e:44:6e:e4:a6:3d'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.bridge.mac_address = 68463639176765  (0x3e446ee4a63d)  (uint64)
  net.interface = 'pan0'  (string)
  net.linux.ifindex = 4  (0x4)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
  access_control.file = '/dev/snd/timer'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/timer'  (string)
  alsa.type = 'timer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Timer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'  (string)
  linux.device_file = '/dev/snd/timer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/timer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
  access_control.file = '/dev/sequencer2'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'  (string)
  linux.device_file = '/dev/sequencer2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2'  (string)
  oss.device_file = '/dev/sequencer2'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
  access_control.file = '/dev/sequencer'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'  (string)
  linux.device_file = '/dev/sequencer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer'  (string)
  oss.device_file = '/dev/sequencer'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
  access_control.file = '/dev/snd/seq'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/seq'  (string)
  alsa.type = 'sequencer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'  (string)
  linux.device_file = '/dev/snd/seq'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/seq'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
  access_control.file = '/dev/input/event3'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Macintosh mouse button emulation'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'  (string)
  input.device = '/dev/input/event3'  (string)
  input.product = 'Macintosh mouse button emulation'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/virtual/input/input3/event3'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_FAN'
  fan.enabled = true  (bool)
  info.capabilities = {'fan'} (string list)
  info.category = 'fan'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Fan'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_FAN'  (string)
  linux.acpi_path = '/proc/acpi/fan/FAN'  (string)
  linux.acpi_type = 2  (0x2)  (int)
  linux.hotplug_type = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AMD Athlon(tm) 64 X2 Dual Core Processor 5000+'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'  (string)
  linux.acpi_path = '/proc/acpi/processor/CPU0'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = false  (bool)
  processor.number = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AMD Athlon(tm) 64 X2 Dual Core Processor 5000+'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1'  (string)
  linux.acpi_path = '/proc/acpi/processor/CPU1'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = false  (bool)
  processor.number = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
  info.capabilities = {'net', 'net.loopback'} (string list)
  info.category = 'net.loopback'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Loopback device Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/virtual/net/lo'  (string)
  net.address = '00:00:00:00:00:00'  (string)
  net.arp_proto_hw_id = 772  (0x304)  (int)
  net.interface = 'lo'  (string)
  net.linux.ifindex = 1  (0x1)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
  button.has_state = false  (bool)
  button.type = 'sleep'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Sleep Button (CM)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'  (string)
  input.device = '/dev/input/event2'  (string)
  input.product = 'Sleep Button (CM)'  (string)
  linux.device_file = '/dev/input/event2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (CM)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'  (string)
  input.device = '/dev/input/event1'  (string)
  input.product = 'Power Button (CM)'  (string)
  linux.device_file = '/dev/input/event1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (FF)'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'  (string)
  input.device = '/dev/input/event0'  (string)
  input.product = 'Power Button (FF)'  (string)
  linux.device_file = '/dev/input/event0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'System Board'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0e'  (string)
  pnp.description = 'System Board'  (string)
  pnp.id = 'PNP0c01'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0d'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
  info.linux.driver = 'i8042 kbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0c'  (string)
  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  pnp.id = 'PNP0303'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
  info.linux.driver = 'i8042 aux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PS/2 Port for PS/2-style Mice'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0b'  (string)
  pnp.description = 'PS/2 Port for PS/2-style Mice'  (string)
  pnp.id = 'PNP0f13'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0400'
  info.linux.driver = 'parport_pc'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Standard LPT printer port'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0400'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0a'  (string)
  pnp.description = 'Standard LPT printer port'  (string)
  pnp.id = 'PNP0400'  (string)

udi = '/org/freedesktop/Hal/devices/ppdev_parport0'
  access_control.file = '/dev/parport0'  (string)
  access_control.type = 'ppdev'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'ppdev', 'access_control'} (string list)
  info.category = 'ppdev'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0400'  (string)
  info.product = 'Parallel Port Device'  (string)
  info.subsystem = 'ppdev'  (string)
  info.udi = '/org/freedesktop/Hal/devices/ppdev_parport0'  (string)
  linux.device_file = '/dev/parport0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'ppdev'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0a/ppdev/parport0'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
  info.linux.driver = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09'  (string)
  pnp.description = '16550A-compatible COM port'  (string)
  pnp.id = 'PNP0501'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
  access_control.file = '/dev/ttyS0'  (string)
  access_control.type = 'modem'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'serial', 'access_control'} (string list)
  info.category = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.subsystem = 'tty'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'  (string)
  linux.device_file = '/dev/ttyS0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'tty'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09/tty/ttyS0'  (string)
  serial.device = '/dev/ttyS0'  (string)
  serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  serial.port = 0  (0x0)  (int)
  serial.type = 'platform'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PC standard floppy disk controller'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:08'  (string)
  pnp.description = 'PC standard floppy disk controller'  (string)
  pnp.id = 'PNP0700'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Math Coprocessor'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:07'  (string)
  pnp.description = 'Math Coprocessor'  (string)
  pnp.id = 'PNP0c04'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT-style speaker sound'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:06'  (string)
  pnp.description = 'AT-style speaker sound'  (string)
  pnp.id = 'PNP0800'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
  info.linux.driver = 'rtc_cmos'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT Real-Time Clock'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:05'  (string)
  pnp.description = 'AT Real-Time Clock'  (string)
  pnp.id = 'PNP0b00'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (PNP0103)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:04'  (string)
  pnp.id = 'PNP0103'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT DMA Controller'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:03'  (string)
  pnp.description = 'AT DMA Controller'  (string)
  pnp.id = 'PNP0200'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:02'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:01'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (PNP0a08)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:00'  (string)
  pnp.id = 'PNP0a08'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  info.linux.driver = 'serial8250'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (serial8250)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250'  (string)
  platform.id = 'serial8250'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
  info.linux.driver = 'pcspkr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (pcspkr)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr'  (string)
  platform.id = 'pcspkr'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
  info.capabilities = {'input'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  info.product = 'PC Speaker'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'  (string)
  input.device = '/dev/input/event5'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  input.product = 'PC Speaker'  (string)
  linux.device_file = '/dev/input/event5'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input5/event5'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
  info.linux.driver = 'i8042'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (i8042)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042'  (string)
  platform.id = 'i8042'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
  info.linux.driver = 'psmouse'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'  (string)
  serio.description = 'i8042 AUX port'  (string)
  serio.id = 'serio1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
  access_control.file = '/dev/input/event6'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  info.product = 'ImPS/2 Generic Wheel Mouse'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'  (string)
  input.device = '/dev/input/event6'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  input.product = 'ImPS/2 Generic Wheel Mouse'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event6'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input6/event6'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
  info.linux.driver = 'atkbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 KBD port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'  (string)
  serio.description = 'i8042 KBD port'  (string)
  serio.id = 'serio0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  info.product = 'AT Translated Set 2 keyboard'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'  (string)
  input.device = '/dev/input/event4'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  input.product = 'AT Translated Set 2 keyboard'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'evdev'  (string)
  linux.device_file = '/dev/input/event4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input4/event4'  (string)

udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (floppy.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/floppy.0'  (string)
  platform.id = 'floppy.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy'
  access_control.file = '/dev/fd0'  (string)
  access_control.type = 'floppy'  (string)
  block.device = '/dev/fd0'  (string)
  block.is_volume = false  (bool)
  block.major = 2  (0x2)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/platform_floppy_0'  (string)
  info.product = 'PC Floppy Drive'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy'  (string)
  info.vendor = ''  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/platform/floppy.0/block/fd0'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'platform'  (string)
  storage.drive_type = 'floppy'  (string)
  storage.hotpluggable = false  (bool)
  storage.media_check_enabled = false  (bool)
  storage.model = ''  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/platform_floppy_0'  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.requires_eject = false  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'PC Floppy Drive'  (string)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'uid='} (string list)

udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (Fixed MDIO bus.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/Fixed MDIO bus.0'  (string)
  platform.id = 'Fixed MDIO bus.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1022_1103'
  info.linux.driver = 'k8temp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8 [Athlon64/Opteron] Miscellaneous Control'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1103'  (string)
  info.vendor = 'Advanced Micro Devices [AMD]'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3'  (string)
  pci.product = 'K8 [Athlon64/Opteron] Miscellaneous Control'  (string)
  pci.product_id = 4355  (0x1103)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Advanced Micro Devices [AMD]'  (string)
  pci.vendor_id = 4130  (0x1022)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1022_1102'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8 [Athlon64/Opteron] DRAM Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1102'  (string)
  info.vendor = 'Advanced Micro Devices [AMD]'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2'  (string)
  pci.product = 'K8 [Athlon64/Opteron] DRAM Controller'  (string)
  pci.product_id = 4354  (0x1102)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Advanced Micro Devices [AMD]'  (string)
  pci.vendor_id = 4130  (0x1022)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1022_1101'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8 [Athlon64/Opteron] Address Map'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1101'  (string)
  info.vendor = 'Advanced Micro Devices [AMD]'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1'  (string)
  pci.product = 'K8 [Athlon64/Opteron] Address Map'  (string)
  pci.product_id = 4353  (0x1101)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Advanced Micro Devices [AMD]'  (string)
  pci.vendor_id = 4130  (0x1022)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1022_1100'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1100'  (string)
  info.vendor = 'Advanced Micro Devices [AMD]'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0'  (string)
  pci.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'  (string)
  pci.product_id = 4352  (0x1100)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Advanced Micro Devices [AMD]'  (string)
  pci.vendor_id = 4130  (0x1022)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_377'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 PCI Express bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_377'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0'  (string)
  pci.product = 'MCP55 PCI Express bridge'  (string)
  pci.product_id = 887  (0x377)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_402_0'
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_377'  (string)
  info.product = 'GeForce 8600 GT'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_402_0'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/0000:07:00.0'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/0000:07:00.0'  (string)
  pci.product = 'GeForce 8600 GT'  (string)
  pci.product_id = 1026  (0x402)  (int)
  pci.subsys_product_id = 16406  (0x4016)  (int)
  pci.subsys_vendor = 'XFX Pine Group Inc.'  (string)
  pci.subsys_vendor_id = 5762  (0x1682)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_375'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 PCI Express bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_375'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0'  (string)
  pci.product = 'MCP55 PCI Express bridge'  (string)
  pci.product_id = 885  (0x375)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_378'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 PCI Express bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_378'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0'  (string)
  pci.product = 'MCP55 PCI Express bridge'  (string)
  pci.product_id = 888  (0x378)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_374_0'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 PCI Express bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_374_0'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0'  (string)
  pci.product = 'MCP55 PCI Express bridge'  (string)
  pci.product_id = 884  (0x374)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_374'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 PCI Express bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_374'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0'  (string)
  pci.product = 'MCP55 PCI Express bridge'  (string)
  pci.product_id = 884  (0x374)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_376'
  info.linux.driver = 'pcieport-driver'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 PCI Express bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_376'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0'  (string)
  pci.product = 'MCP55 PCI Express bridge'  (string)
  pci.product_id = 886  (0x376)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_402'
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_376'  (string)
  info.product = 'GeForce 8600 GT'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_402'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0/0000:02:00.0'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0/0000:02:00.0'  (string)
  pci.product = 'GeForce 8600 GT'  (string)
  pci.product_id = 1026  (0x402)  (int)
  pci.subsys_product_id = 16406  (0x4016)  (int)
  pci.subsys_vendor = 'XFX Pine Group Inc.'  (string)
  pci.subsys_vendor_id = 5762  (0x1682)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_373_0'
  info.linux.driver = 'forcedeth'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 Ethernet'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_373_0'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0'  (string)
  pci.product = 'MCP55 Ethernet'  (string)
  pci.product_id = 883  (0x373)  (int)
  pci.subsys_product_id = 9475  (0x2503)  (int)
  pci.subsys_vendor = 'Biostar Microtech Int'l Corp'  (string)
  pci.subsys_vendor_id = 5477  (0x1565)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_e0_4d_30_83_5c'
  info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
  info.category = 'net.80203'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_373_0'  (string)
  info.product = 'Networking Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_e0_4d_30_83_5c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/net/eth1'  (string)
  net.80203.mac_address = 963367699292  (0xe04d30835c)  (uint64)
  net.address = '00:e0:4d:30:83:5c'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'eth1'  (string)
  net.linux.ifindex = 3  (0x3)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_10de_373_0'  (string)
  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)

udi = '/org/freedesktop/Hal/devices/pci_10de_373'
  info.linux.driver = 'forcedeth'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 Ethernet'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_373'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0'  (string)
  pci.product = 'MCP55 Ethernet'  (string)
  pci.product_id = 883  (0x373)  (int)
  pci.subsys_product_id = 9475  (0x2503)  (int)
  pci.subsys_vendor = 'Biostar Microtech Int'l Corp'  (string)
  pci.subsys_vendor_id = 5477  (0x1565)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_e0_4d_30_83_5b'
  info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
  info.category = 'net.80203'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_373'  (string)
  info.product = 'Networking Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_e0_4d_30_83_5b'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/net/eth0'  (string)
  net.80203.mac_address = 963367699291  (0xe04d30835b)  (uint64)
  net.address = '00:e0:4d:30:83:5b'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'eth0'  (string)
  net.linux.ifindex = 2  (0x2)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_10de_373'  (string)
  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)

udi = '/org/freedesktop/Hal/devices/pci_10de_371'
  info.linux.driver = 'HDA Intel'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 High Definition Audio'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_371'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1'  (string)
  pci.device_class = 4  (0x4)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1'  (string)
  pci.product = 'MCP55 High Definition Audio'  (string)
  pci.product_id = 881  (0x371)  (int)
  pci.subsys_product_id = 33292  (0x820c)  (int)
  pci.subsys_vendor = 'Biostar Microtech Int'l Corp'  (string)
  pci.subsys_vendor_id = 5477  (0x1565)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'
  info.capabilities = {'sound'} (string list)
  info.category = 'sound'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_371'  (string)
  info.product = 'HDA NVidia Sound Card'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1/sound/card0'  (string)
  sound.card = 0  (0x0)  (int)
  sound.card_id = 'HDA NVidia'  (string)
  sound.originating_device = '/org/freedesktop/Hal/devices/pci_10de_371'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_alsa_capture_2'
  access_control.file = '/dev/snd/pcmC0D2c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA NVidia'  (string)
  alsa.device = 2  (0x2)  (int)
  alsa.device_file = '/dev/snd/pcmC0D2c'  (string)
  alsa.device_id = 'ALC888 Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  info.product = 'ALC888 Analog ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_alsa_capture_2'  (string)
  linux.device_file = '/dev/snd/pcmC0D2c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1/sound/card0/pcmC0D2c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_alsa_playback_1'
  access_control.file = '/dev/snd/pcmC0D1p'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA NVidia'  (string)
  alsa.device = 1  (0x1)  (int)
  alsa.device_file = '/dev/snd/pcmC0D1p'  (string)
  alsa.device_id = 'ALC888 Digital'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'playback'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  info.product = 'ALC888 Digital ALSA Playback Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_alsa_playback_1'  (string)
  linux.device_file = '/dev/snd/pcmC0D1p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1/sound/card0/pcmC0D1p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_alsa_capture_1'
  access_control.file = '/dev/snd/pcmC0D1c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA NVidia'  (string)
  alsa.device = 1  (0x1)  (int)
  alsa.device_file = '/dev/snd/pcmC0D1c'  (string)
  alsa.device_id = 'ALC888 Digital'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  info.product = 'ALC888 Digital ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_alsa_capture_1'  (string)
  linux.device_file = '/dev/snd/pcmC0D1c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1/sound/card0/pcmC0D1c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_alsa_playback_0'
  access_control.file = '/dev/snd/pcmC0D0p'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA NVidia'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0p'  (string)
  alsa.device_id = 'ALC888 Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'playback'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  info.product = 'ALC888 Analog ALSA Playback Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_alsa_playback_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0p'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1/sound/card0/pcmC0D0p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_alsa_capture_0'
  access_control.file = '/dev/snd/pcmC0D0c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA NVidia'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC0D0c'  (string)
  alsa.device_id = 'ALC888 Analog'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  info.product = 'ALC888 Analog ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_alsa_capture_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1/sound/card0/pcmC0D0c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_oss_mixer__1'
  access_control.file = '/dev/mixer'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  info.product = 'ALC888 Analog OSS Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_oss_mixer__1'  (string)
  linux.device_file = '/dev/mixer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1/sound/card0/mixer'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA NVidia'  (string)
  oss.device_file = '/dev/mixer'  (string)
  oss.device_id = 'ALC888 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  oss.type = 'mixer'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_oss_pcm_0_0'
  access_control.file = '/dev/dsp'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  info.product = 'ALC888 Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_oss_pcm_0_0'  (string)
  linux.device_file = '/dev/dsp'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1/sound/card0/dsp'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA NVidia'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/dsp'  (string)
  oss.device_id = 'ALC888 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_alsa_control__1'
  access_control.file = '/dev/snd/controlC0'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.card_id = 'HDA NVidia'  (string)
  alsa.device_file = '/dev/snd/controlC0'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  alsa.type = 'control'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  info.product = 'HDA NVidia ALSA Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_alsa_control__1'  (string)
  linux.device_file = '/dev/snd/controlC0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1/sound/card0/controlC0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_oss_pcm_0'
  access_control.file = '/dev/audio'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  info.product = 'ALC888 Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_oss_pcm_0'  (string)
  linux.device_file = '/dev/audio'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1/sound/card0/audio'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA NVidia'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/audio'  (string)
  oss.device_id = 'ALC888 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_oss_pcm_1'
  access_control.file = '/dev/adsp'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  info.product = 'ALC888 Analog OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0_oss_pcm_1'  (string)
  linux.device_file = '/dev/adsp'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.1/sound/card0/adsp'  (string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'HDA NVidia'  (string)
  oss.device = 1  (0x1)  (int)
  oss.device_file = '/dev/adsp'  (string)
  oss.device_id = 'ALC888 Analog'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_371_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_370'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 PCI bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_370'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 1  (0x1)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0'  (string)
  pci.product = 'MCP55 PCI bridge'  (string)
  pci.product_id = 880  (0x370)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1131_7130'
  info.linux.driver = 'saa7134'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_370'  (string)
  info.product = 'SAA7130 Video Broadcast Decoder'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1131_7130'  (string)
  info.vendor = 'Philips Semiconductors'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:01:09.0'  (string)
  pci.device_class = 4  (0x4)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:01:09.0'  (string)
  pci.product = 'SAA7130 Video Broadcast Decoder'  (string)
  pci.product_id = 28976  (0x7130)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor = 'Philips Semiconductors'  (string)
  pci.subsys_vendor_id = 4401  (0x1131)  (int)
  pci.vendor = 'Philips Semiconductors'  (string)
  pci.vendor_id = 4401  (0x1131)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1131_7130_video4linux_0'
  access_control.file = '/dev/video0'  (string)
  access_control.type = 'video4linux'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'video4linux', 'video4linux.video_capture', 'video4linux.video_overlay', 'access_control'} (string list)
  info.category = 'video4linux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1131_7130'  (string)
  info.product = 'UNKNOWN/GENERIC'  (string)
  info.subsystem = 'video4linux'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1131_7130_video4linux_0'  (string)
  linux.device_file = '/dev/video0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'video4linux'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:01:09.0/video4linux/video0'  (string)
  video4linux.device = '/dev/video0'  (string)
  video4linux.version = '2'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1131_7130_video4linux'
  access_control.file = '/dev/vbi0'  (string)
  access_control.type = 'video4linux'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'video4linux', 'video4linux.video_capture', 'video4linux.video_overlay', 'access_control'} (string list)
  info.category = 'video4linux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1131_7130'  (string)
  info.product = 'UNKNOWN/GENERIC'  (string)
  info.subsystem = 'video4linux'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1131_7130_video4linux'  (string)
  linux.device_file = '/dev/vbi0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'video4linux'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:01:09.0/video4linux/vbi0'  (string)
  video4linux.device = '/dev/vbi0'  (string)
  video4linux.version = '2'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0'
  info.capabilities = {'sound'} (string list)
  info.category = 'sound'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1131_7130'  (string)
  info.product = 'saa7130[0] Sound Card'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:01:09.0/sound/card1'  (string)
  sound.card = 1  (0x1)  (int)
  sound.card_id = 'saa7130[0]'  (string)
  sound.originating_device = '/org/freedesktop/Hal/devices/pci_1131_7130'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0_alsa_capture_0'
  access_control.file = '/dev/snd/pcmC1D0c'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 1  (0x1)  (int)
  alsa.card_id = 'saa7130[0]'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.device_file = '/dev/snd/pcmC1D0c'  (string)
  alsa.device_id = 'SAA7134 PCM'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0'  (string)
  alsa.pcm_class = 'generic'  (string)
  alsa.type = 'capture'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0'  (string)
  info.product = 'SAA7134 PCM ALSA Capture Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0_alsa_capture_0'  (string)
  linux.device_file = '/dev/snd/pcmC1D0c'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:01:09.0/sound/card1/pcmC1D0c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0_oss_mixer__1'
  access_control.file = '/dev/mixer1'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0'  (string)
  info.product = 'saa7130[0] OSS Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0_oss_mixer__1'  (string)
  linux.device_file = '/dev/mixer1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:01:09.0/sound/card1/mixer1'  (string)
  oss.card = 1  (0x1)  (int)
  oss.card_id = 'saa7130[0]'  (string)
  oss.device_file = '/dev/mixer1'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0'  (string)
  oss.type = 'mixer'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0_oss_pcm_0_0'
  access_control.file = '/dev/dsp1'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0'  (string)
  info.product = 'saa7130[0] OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0_oss_pcm_0_0'  (string)
  linux.device_file = '/dev/dsp1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:01:09.0/sound/card1/dsp1'  (string)
  oss.card = 1  (0x1)  (int)
  oss.card_id = 'saa7130[0]'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/dsp1'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0_alsa_control__1'
  access_control.file = '/dev/snd/controlC1'  (string)
  access_control.type = 'sound'  (string)
  alsa.card = 1  (0x1)  (int)
  alsa.card_id = 'saa7130[0]'  (string)
  alsa.device_file = '/dev/snd/controlC1'  (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0'  (string)
  alsa.type = 'control'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0'  (string)
  info.product = 'saa7130[0] ALSA Control Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0_alsa_control__1'  (string)
  linux.device_file = '/dev/snd/controlC1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:01:09.0/sound/card1/controlC1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0_oss_pcm_0'
  access_control.file = '/dev/audio1'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0'  (string)
  info.product = 'saa7130[0] OSS PCM Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0_oss_pcm_0'  (string)
  linux.device_file = '/dev/audio1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/0000:01:09.0/sound/card1/audio1'  (string)
  oss.card = 1  (0x1)  (int)
  oss.card_id = 'saa7130[0]'  (string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/audio1'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1131_7130_sound_card_0'  (string)
  oss.type = 'pcm'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_1'
  info.linux.driver = 'sata_nv'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 SATA Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_1'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.2'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 133  (0x85)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.2'  (string)
  pci.product = 'MCP55 SATA Controller'  (string)
  pci.product_id = 895  (0x37f)  (int)
  pci.subsys_product_id = 21507  (0x5403)  (int)
  pci.subsys_vendor = 'Biostar Microtech Int'l Corp'  (string)
  pci.subsys_vendor_id = 5477  (0x1565)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_1_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f_1'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_1_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.2/host5/scsi_host/host5'  (string)
  scsi_host.host = 5  (0x5)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_1_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f_1'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_1_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.2/host4/scsi_host/host4'  (string)
  scsi_host.host = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_0'
  info.linux.driver = 'sata_nv'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 SATA Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_0'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.1'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 133  (0x85)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.1'  (string)
  pci.product = 'MCP55 SATA Controller'  (string)
  pci.product_id = 895  (0x37f)  (int)
  pci.subsys_product_id = 21507  (0x5403)  (int)
  pci.subsys_vendor = 'Biostar Microtech Int'l Corp'  (string)
  pci.subsys_vendor_id = 5477  (0x1565)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f_0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.1/host3/scsi_host/host3'  (string)
  scsi_host.host = 3  (0x3)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f_0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.1/host2'  (string)
  scsi_host.host = 2  (0x2)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.1/host2/scsi_host/host2'  (string)
  scsi_host.host = 2  (0x2)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.1/host2/target2:0:0/2:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 2  (0x2)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'SPD2513P'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'cdrom'  (string)
  scsi.vendor = 'PHILIPS'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_SPD2513P'
  access_control.file = '/dev/sr0'  (string)
  access_control.type = 'cdrom'  (string)
  block.device = '/dev/sr0'  (string)
  block.is_volume = false  (bool)
  block.major = 11  (0xb)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_SPD2513P'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SPD2513P'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_SPD2513P'  (string)
  info.vendor = 'PHILIPS'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.1/host2/target2:0:0/2:0:0:0/block/sr0'  (string)
  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'pci'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = true  (bool)
  storage.cdrom.cdrw = true  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.dvdplusr = true  (bool)
  storage.cdrom.dvdplusrdl = true  (bool)
  storage.cdrom.dvdplusrw = true  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = true  (bool)
  storage.cdrom.dvdram = true  (bool)
  storage.cdrom.dvdrdl = true  (bool)
  storage.cdrom.dvdrw = true  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.mo = false  (bool)
  storage.cdrom.mrw = true  (bool)
  storage.cdrom.mrw_w = true  (bool)
  storage.cdrom.read_speed = 22160  (0x5690)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.support_multisession = true  (bool)
  storage.cdrom.write_speed = 22160  (0x5690)  (int)
  storage.cdrom.write_speeds = {'22160', '16620', '11080', '8310'} (string list)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_version = 'MP03'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'SPD2513P'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 730562560  (0x2b8b8000)  (uint64)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = true  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'PHILIPS'  (string)

udi = '/org/freedesktop/Hal/devices/volume_label_Ubuntu_9_04_amd64'
  block.device = '/dev/sr0'  (string)
  block.is_volume = true  (bool)
  block.major = 11  (0xb)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_SPD2513P'  (string)
  info.capabilities = {'volume.disc', 'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_model_SPD2513P'  (string)
  info.product = 'Ubuntu 9.04 amd64'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_label_Ubuntu_9_04_amd64'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.1/host2/target2:0:0/2:0:0:0/block/sr0/fakevolume'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 2048  (0x800)  (int)
  volume.disc.capacity = 730562560  (0x2b8b8000)  (uint64)
  volume.disc.has_audio = false  (bool)
  volume.disc.has_data = true  (bool)
  volume.disc.is_appendable = false  (bool)
  volume.disc.is_blank = false  (bool)
  volume.disc.is_blurayvideo = false  (bool)
  volume.disc.is_rewritable = false  (bool)
  volume.disc.is_svcd = false  (bool)
  volume.disc.is_vcd = false  (bool)
  volume.disc.is_videodvd = false  (bool)
  volume.disc.type = 'dvd_plus_r'  (string)
  volume.fstype = 'iso9660'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = ''  (string)
  volume.ignore = false  (bool)
  volume.is_disc = true  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = true  (bool)
  volume.is_partition = false  (bool)
  volume.label = 'Ubuntu 9.04 amd64'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'uid=', 'mode=', 'iocharset='} (string list)
  volume.mount_point = '/cdrom'  (string)
  volume.num_blocks = 1426880  (0x15c5c0)  (uint64)
  volume.size = 730562560  (0x2b8b8000)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host_scsi_device_lun0_scsi_generic'
  access_control.file = '/dev/sg1'  (string)
  access_control.type = 'cdrom'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'scsi_generic', 'access_control'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_0_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.1/host2/target2:0:0/2:0:0:0/scsi_generic/sg1'  (string)
  scsi_generic.device = '/dev/sg1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f'
  info.linux.driver = 'sata_nv'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 SATA Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 133  (0x85)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0'  (string)
  pci.product = 'MCP55 SATA Controller'  (string)
  pci.product_id = 895  (0x37f)  (int)
  pci.subsys_product_id = 21507  (0x5403)  (int)
  pci.subsys_vendor = 'Biostar Microtech Int'l Corp'  (string)
  pci.subsys_vendor_id = 5477  (0x1565)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host1/scsi_host/host1'  (string)
  scsi_host.host = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host0/scsi_host/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host0/target0:0:0/0:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 0  (0x0)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'ST3300620AS'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'
  block.device = '/dev/sda'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host_scsi_device_lun0'  (string)
  info.product = 'ST3300620AS'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.vendor = 'ATA'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host0/target0:0:0/0:0:0:0/block/sda'  (string)
  storage.automount_enabled_hint = false  (bool)
  storage.bus = 'pci'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '3.AA'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = false  (bool)
  storage.model = 'ST3300620AS'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = 'mbr'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 300069052416  (0x45dd826000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = 'SATA_ST3300620AS_5QF0EWCY'  (string)
  storage.size = 300069052416  (0x45dd826000)  (uint64)
  storage.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/volume_part4_size_1024'
  block.device = '/dev/sda4'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 4  (0x4)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part4_size_1024'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host0/target0:0:0/0:0:0:0/block/sda/sda4'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = 'partitiontable'  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 2  (0x2)  (uint64)
  volume.partition.flags = {} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 300069052416  (0x45dd826000)  (uint64)
  volume.partition.number = 4  (0x4)  (int)
  volume.partition.scheme = 'mbr'  (string)
  volume.partition.start = 21147194880  (0x4ec789600)  (uint64)
  volume.partition.type = '0x05'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 1024  (0x400)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_b12276d9_966d_418a_b13d_a12dc0b846a5'
  block.device = '/dev/sda7'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 7  (0x7)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.product = 'Volume (ext4)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_b12276d9_966d_418a_b13d_a12dc0b846a5'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host0/target0:0:0/0:0:0:0/block/sda/sda7'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext4'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
  volume.mount_point = ''  (string)
  volume.num_blocks = 6490197  (0x630855)  (uint64)
  volume.partition.media_size = 300069052416  (0x45dd826000)  (uint64)
  volume.partition.number = 7  (0x7)  (int)
  volume.partition.start = 46744298496  (0xae22d6400)  (uint64)
  volume.size = 3322980864  (0xc610aa00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'b12276d9-966d-418a-b13d-a12dc0b846a5'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_da20c44f_efb6_4f67_a5eb_4cfb3708c032'
  block.device = '/dev/sda6'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 6  (0x6)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.product = 'Volume (ext4)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_da20c44f_efb6_4f67_a5eb_4cfb3708c032'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host0/target0:0:0/0:0:0:0/block/sda/sda6'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext4'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
  volume.mount_point = ''  (string)
  volume.num_blocks = 40001787  (0x26260fb)  (uint64)
  volume.partition.media_size = 300069052416  (0x45dd826000)  (uint64)
  volume.partition.number = 6  (0x6)  (int)
  volume.partition.start = 26263351296  (0x61d6af000)  (uint64)
  volume.size = 20480914944  (0x4c4c1f600)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'da20c44f-efb6-4f67-a5eb-4cfb3708c032'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_a0619e30_626f_4b21_b9ed_ad6751d2f0b2'
  block.device = '/dev/sda5'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 5  (0x5)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.product = 'Volume (ext4)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_a0619e30_626f_4b21_b9ed_ad6751d2f0b2'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host0/target0:0:0/0:0:0:0/block/sda/sda5'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext4'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
  volume.mount_point = ''  (string)
  volume.num_blocks = 9992367  (0x9878af)  (uint64)
  volume.partition.media_size = 300069052416  (0x45dd826000)  (uint64)
  volume.partition.number = 5  (0x5)  (int)
  volume.partition.start = 21147227136  (0x4ec791400)  (uint64)
  volume.size = 5116091904  (0x130f15e00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'a0619e30-626f-4b21-b9ed-ad6751d2f0b2'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_508d46ad_955b_4f55_a694_da7a6647e32b'
  block.device = '/dev/sda3'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 3  (0x3)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.product = 'Volume (ext4)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_508d46ad_955b_4f55_a694_da7a6647e32b'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host0/target0:0:0/0:0:0:0/block/sda/sda3'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext4'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
  volume.mount_point = ''  (string)
  volume.num_blocks = 488279610  (0x1d1a8e3a)  (uint64)
  volume.partition.media_size = 300069052416  (0x45dd826000)  (uint64)
  volume.partition.number = 3  (0x3)  (int)
  volume.partition.start = 50067279360  (0xba83e0e00)  (uint64)
  volume.size = 249999160320  (0x3a351c7400)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '508d46ad-955b-4f55-a694-da7a6647e32b'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_6eee96df_c915_441b_a088_a505adec0271'
  block.device = '/dev/sda2'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 2  (0x2)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.product = 'Volume (swap)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_6eee96df_c915_441b_a088_a505adec0271'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host0/target0:0:0/0:0:0:0/block/sda/sda2'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'swap'  (string)
  volume.fsusage = 'other'  (string)
  volume.fsversion = '2'  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 12000555  (0xb71d2b)  (uint64)
  volume.partition.media_size = 300069052416  (0x45dd826000)  (uint64)
  volume.partition.number = 2  (0x2)  (int)
  volume.partition.start = 15002910720  (0x37e3e4000)  (uint64)
  volume.size = 6144284160  (0x16e3a5600)  (uint64)
  volume.uuid = '6eee96df-c915-441b-a088-a505adec0271'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_ace63de3_8858_42ee_b248_8f59608271af'
  block.device = '/dev/sda1'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 1  (0x1)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3300620AS_5QF0EWCY'  (string)
  info.product = 'Volume (ext4)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_ace63de3_8858_42ee_b248_8f59608271af'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host0/target0:0:0/0:0:0:0/block/sda/sda1'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext4'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
  volume.mount_point = ''  (string)
  volume.num_blocks = 29302497  (0x1bf1ee1)  (uint64)
  volume.partition.media_size = 300069052416  (0x45dd826000)  (uint64)
  volume.partition.number = 1  (0x1)  (int)
  volume.partition.start = 32256  (0x7e00)  (uint64)
  volume.size = 15002878464  (0x37e3dc200)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'ace63de3-8858-42ee-b248-8f59608271af'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_37f_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0'  (string)
  scsi_generic.device = '/dev/sg0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_36e'
  info.linux.driver = 'pata_amd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 IDE'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_36e'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 138  (0x8a)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0'  (string)
  pci.product = 'MCP55 IDE'  (string)
  pci.product_id = 878  (0x36e)  (int)
  pci.subsys_product_id = 13317  (0x3405)  (int)
  pci.subsys_vendor = 'Biostar Microtech Int'l Corp'  (string)
  pci.subsys_vendor_id = 5477  (0x1565)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_36e'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/host7/scsi_host/host7'  (string)
  scsi_host.host = 7  (0x7)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_36e'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/host6'  (string)
  scsi_host.host = 6  (0x6)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/host6/scsi_host/host6'  (string)
  scsi_host.host = 6  (0x6)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/host6/target6:0:1/6:0:1:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 6  (0x6)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'CD/DVDW SH-S182M'  (string)
  scsi.target = 1  (0x1)  (int)
  scsi.type = 'cdrom'  (string)
  scsi.vendor = 'TSSTcorp'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_CD_DVDW_SH_S182M'
  access_control.file = '/dev/sr1'  (string)
  access_control.type = 'cdrom'  (string)
  block.device = '/dev/sr1'  (string)
  block.is_volume = false  (bool)
  block.major = 11  (0xb)  (int)
  block.minor = 1  (0x1)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CD_DVDW_SH_S182M'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host_scsi_device_lun0'  (string)
  info.product = 'CD/DVDW SH-S182M'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_CD_DVDW_SH_S182M'  (string)
  info.vendor = 'TSSTcorp'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/host6/target6:0:1/6:0:1:0/block/sr1'  (string)
  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'pci'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = true  (bool)
  storage.cdrom.cdrw = true  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.dvdplusr = true  (bool)
  storage.cdrom.dvdplusrdl = true  (bool)
  storage.cdrom.dvdplusrw = true  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = true  (bool)
  storage.cdrom.dvdram = true  (bool)
  storage.cdrom.dvdrdl = true  (bool)
  storage.cdrom.dvdrw = true  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.mo = false  (bool)
  storage.cdrom.mrw = true  (bool)
  storage.cdrom.mrw_w = true  (bool)
  storage.cdrom.read_speed = 8468  (0x2114)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.support_multisession = true  (bool)
  storage.cdrom.write_speed = 8468  (0x2114)  (int)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_version = 'SB01'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'CD/DVDW SH-S182M'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = ''  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = true  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'TSSTcorp'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host_scsi_device_lun0_scsi_generic'
  access_control.file = '/dev/sg2'  (string)
  access_control.type = 'cdrom'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'scsi_generic', 'access_control'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_36e_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/host6/target6:0:1/6:0:1:0/scsi_generic/sg2'  (string)
  scsi_generic.device = '/dev/sg2'  (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_36d'
  info.linux.driver = 'ehci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 USB Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_36d'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1'  (string)
  pci.product = 'MCP55 USB Controller'  (string)
  pci.product_id = 877  (0x36d)  (int)
  pci.subsys_product_id = 13317  (0x3405)  (int)
  pci.subsys_vendor = 'Biostar Microtech Int'l Corp'  (string)
  pci.subsys_vendor_id = 5477  (0x1565)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_36d'  (string)
  info.product = '2.0 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/001/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 10  (0xa)  (int)
  usb_device.product = '2.0 root hub'  (string)
  usb_device.product_id = 2  (0x2)  (int)
  usb_device.serial = '0000:00:02.1'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1'  (string)
  info.product = 'USB to ATA/ATAPI Bridge'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF'  (string)
  info.vendor = 'Iomega Corp.'  (string)
  linux.device_file = '/dev/bus/usb/001/003'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-4'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.configuration = 'USB Mass Storage'  (string)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 0  (0x0)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 3  (0x3)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-4'  (string)
  usb_device.max_power = 2  (0x2)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'USB to ATA/ATAPI Bridge'  (string)
  usb_device.product_id = 1141  (0x475)  (int)
  usb_device.serial = '909CFFFFFFFF'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Iomega Corp.'  (string)
  usb_device.vendor_id = 1435  (0x59b)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0'
  info.linux.driver = 'usb-storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF'  (string)
  info.product = 'USB Mass Storage Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = false  (bool)
  usb.configuration = 'USB Mass Storage'  (string)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 0  (0x0)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 8  (0x8)  (int)
  usb.interface.description = 'MSC Bulk-Only Transfer'  (string)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 80  (0x50)  (int)
  usb.interface.subclass = 6  (0x6)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 3  (0x3)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0'  (string)
  usb.max_power = 2  (0x2)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Mass Storage Interface'  (string)
  usb.product_id = 1141  (0x475)  (int)
  usb.serial = '909CFFFFFFFF'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Iomega Corp.'  (string)
  usb.vendor_id = 1435  (0x59b)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0/host9'  (string)
  scsi_host.host = 9  (0x9)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0/host9/scsi_host/host9'  (string)
  scsi_host.host = 9  (0x9)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0/host9/target9:0:0/9:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 9  (0x9)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = '28AS'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'ST310005'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_ST310005_28AS_909CFFFFFFFF_0_0'
  block.device = '/dev/sdc'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 32  (0x20)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_ST310005_28AS_909CFFFFFFFF_0_0'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0_scsi_host_scsi_device_lun0'  (string)
  info.product = '28AS'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_ST310005_28AS_909CFFFFFFFF_0_0'  (string)
  info.vendor = 'ST310005'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0/host9/target9:0:0/9:0:0:0/block/sdc'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'usb'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '0000'  (string)
  storage.hotpluggable = true  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = false  (bool)
  storage.model = '28AS'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0'  (string)
  storage.partitioning_scheme = 'mbr'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 1000204886016  (0xe8e0db6000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = 'ST310005_28AS_909CFFFFFFFF-0:0'  (string)
  storage.size = 1000204886016  (0xe8e0db6000)  (uint64)
  storage.vendor = 'ST310005'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_74A865A3A8656498'
  block.device = '/dev/sdc1'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 33  (0x21)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_ST310005_28AS_909CFFFFFFFF_0_0'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_ST310005_28AS_909CFFFFFFFF_0_0'  (string)
  info.product = 'Iomega HDD'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_74A865A3A8656498'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0/host9/target9:0:0/9:0:0:0/block/sdc/sdc1'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ntfs-3g'  (string)
  volume.fstype.alternative = 'ntfs'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '3.1'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = 'Iomega HDD'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list)
  volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list)
  volume.mount_point = '/media/Iomega HDD'  (string)
  volume.num_blocks = 1953520002  (0x74705982)  (uint64)
  volume.partition.media_size = 1000204886016  (0xe8e0db6000)  (uint64)
  volume.partition.number = 1  (0x1)  (int)
  volume.partition.start = 32256  (0x7e00)  (uint64)
  volume.policy.mount_filesystem = 'ntfs-3g'  (string)
  volume.size = 1000202241024  (0xe8e0b30400)  (uint64)
  volume.unmount.ntfs.valid_options = {'lazy'} (string list)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '74A865A3A8656498'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_59b_475_909CFFFFFFFF_if0_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0/host9/target9:0:0/9:0:0:0/scsi_generic/sg4'  (string)
  scsi_generic.device = '/dev/sg4'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1'  (string)
  info.product = 'USB Mass Storage Device'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7'  (string)
  info.vendor = 'USBest Technology'  (string)
  linux.device_file = '/dev/bus/usb/001/002'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 256  (0x100)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 2  (0x2)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2'  (string)
  usb_device.max_power = 98  (0x62)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'USB Mass Storage Device'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.serial = '09032554c057c7'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'USBest Technology'  (string)
  usb_device.vendor_id = 4381  (0x111d)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0'
  info.linux.driver = 'usb-storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7'  (string)
  info.product = 'USB Mass Storage Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = false  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 256  (0x100)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 8  (0x8)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 80  (0x50)  (int)
  usb.interface.subclass = 6  (0x6)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0'  (string)
  usb.max_power = 98  (0x62)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Mass Storage Interface'  (string)
  usb.product_id = 0  (0x0)  (int)
  usb.serial = '09032554c057c7'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'USBest Technology'  (string)
  usb.vendor_id = 4381  (0x111d)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host8'  (string)
  scsi_host.host = 8  (0x8)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host8/scsi_host/host8'  (string)
  scsi_host.host = 8  (0x8)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host8/target8:0:0/8:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 8  (0x8)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'DS Pro'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'CENTON'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_CENTON_DS_Pro_09032554c057c7_0_0'
  access_control.file = '/dev/sdb'  (string)
  access_control.type = 'removable-block'  (string)
  block.device = '/dev/sdb'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 16  (0x10)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_CENTON_DS_Pro_09032554c057c7_0_0'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0_scsi_host_scsi_device_lun0'  (string)
  info.product = 'DS Pro'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_CENTON_DS_Pro_09032554c057c7_0_0'  (string)
  info.vendor = 'CENTON'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host8/target8:0:0/8:0:0:0/block/sdb'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'usb'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '0.00'  (string)
  storage.hotpluggable = true  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'DS Pro'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0'  (string)
  storage.partitioning_scheme = 'mbr'  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 8086618112  (0x1e2000000)  (uint64)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = false  (bool)
  storage.serial = 'CENTON_DS_Pro_09032554c057c7-0:0'  (string)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'CENTON'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_1EA5_6F3A'
  access_control.file = '/dev/sdb1'  (string)
  access_control.type = 'removable-block'  (string)
  block.device = '/dev/sdb1'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 17  (0x11)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_CENTON_DS_Pro_09032554c057c7_0_0'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'volume', 'block', 'access_control'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_CENTON_DS_Pro_09032554c057c7_0_0'  (string)
  info.product = 'CENTON USB'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_1EA5_6F3A'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host8/target8:0:0/8:0:0:0/block/sdb/sdb1'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'vfat'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = 'FAT32'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = 'CENTON USB'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid=', 'flush'} (string list)
  volume.mount_point = '/media/CENTON USB'  (string)
  volume.num_blocks = 15794113  (0xf0ffc1)  (uint64)
  volume.partition.media_size = 8086618112  (0x1e2000000)  (uint64)
  volume.partition.number = 1  (0x1)  (int)
  volume.partition.start = 32256  (0x7e00)  (uint64)
  volume.size = 8086585856  (0x1e1ff8200)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '1EA5-6F3A'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_111d_0_09032554c057c7_if0_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.0/host8/target8:0:0/8:0:0:0/scsi_generic/sg3'  (string)
  scsi_generic.device = '/dev/sg3'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-0:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 10  (0xa)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 2  (0x2)  (int)
  usb.serial = '0000:00:02.1'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/pci_10de_36c'
  info.linux.driver = 'ohci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 USB Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_36c'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'  (string)
  pci.product = 'MCP55 USB Controller'  (string)
  pci.product_id = 876  (0x36c)  (int)
  pci.subsys_product_id = 13317  (0x3405)  (int)
  pci.subsys_vendor = 'Biostar Microtech Int'l Corp'  (string)
  pci.subsys_vendor_id = 5477  (0x1565)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_36c'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/002/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2'  (string)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 10  (0xa)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0000:00:02.0'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_41e_4052_noserial'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0'  (string)
  info.product = 'Live! Cam Vista IM'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_41e_4052_noserial'  (string)
  info.vendor = 'Creative Technology, Ltd'  (string)
  linux.device_file = '/dev/bus/usb/002/002'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-10'  (string)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 256  (0x100)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 2  (0x2)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-10'  (string)
  usb_device.max_power = 100  (0x64)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'Live! Cam Vista IM'  (string)
  usb_device.product_id = 16466  (0x4052)  (int)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Creative Technology, Ltd'  (string)
  usb_device.vendor_id = 1054  (0x41e)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_41e_4052_noserial_video4linux'
  access_control.file = '/dev/video1'  (string)
  access_control.type = 'video4linux'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'video4linux', 'video4linux.video_capture', 'access_control'} (string list)
  info.category = 'video4linux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_41e_4052_noserial'  (string)
  info.product = 'Creative Live! Cam Vista IM'  (string)
  info.subsystem = 'video4linux'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_41e_4052_noserial_video4linux'  (string)
  linux.device_file = '/dev/video1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'video4linux'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-10/video4linux/video1'  (string)
  video4linux.device = '/dev/video1'  (string)
  video4linux.version = '2'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_41e_4052_noserial_if0'
  info.linux.driver = 'ov519'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_41e_4052_noserial'  (string)
  info.product = 'USB Vendor Specific Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_41e_4052_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = false  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 256  (0x100)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 255  (0xff)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB Vendor Specific Interface'  (string)
  usb.product_id = 16466  (0x4052)  (int)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Creative Technology, Ltd'  (string)
  usb.vendor_id = 1054  (0x41e)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-0:1.0'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 10  (0xa)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:02.0'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_10de_368'
  info.linux.driver = 'nForce2_smbus'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 SMBus'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_368'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1'  (string)
  pci.product = 'MCP55 SMBus'  (string)
  pci.product_id = 872  (0x368)  (int)
  pci.subsys_product_id = 13317  (0x3405)  (int)
  pci.subsys_vendor = 'Biostar Microtech Int'l Corp'  (string)
  pci.subsys_vendor_id = 5477  (0x1565)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_360'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 LPC Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_360'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'  (string)
  pci.product = 'MCP55 LPC Bridge'  (string)
  pci.product_id = 864  (0x360)  (int)
  pci.subsys_product_id = 13317  (0x3405)  (int)
  pci.subsys_vendor = 'Biostar Microtech Int'l Corp'  (string)
  pci.subsys_vendor_id = 5477  (0x1565)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_369'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'MCP55 Memory Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_369'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.device_class = 5  (0x5)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.product = 'MCP55 Memory Controller'  (string)
  pci.product_id = 873  (0x369)  (int)
  pci.subsys_product_id = 52100  (0xcb84)  (int)
  pci.subsys_vendor = 'nVidia Corporation'  (string)
  pci.subsys_vendor_id = 4318  (0x10de)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/fuse'
  access_control.file = '/dev/fuse'  (string)
  access_control.type = 'camera'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'access_control'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_369'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/fuse'  (string)


Dumped 141 device(s) from the Global Device List.
------------------------------------------------