Dumping 144 device(s) from the Global Device List: ------------------------------------------------- udi = '/org/freedesktop/Hal/devices/computer' info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list) info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list) info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list) info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list) info.capabilities = {'cpufreq_control'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list) info.product = 'Computer' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list) power_management.acpi.linux.version = '20080926' (string) power_management.can_hibernate = true (bool) power_management.can_suspend = true (bool) power_management.can_suspend_hybrid = false (bool) power_management.is_powersave_set = false (bool) power_management.quirk.vbe_post = true (bool) power_management.type = 'acpi' (string) system.board.product = 'NARRA3' (string) system.board.serial = 'MS1C7CR62801579' (string) system.board.vendor = 'ASUSTek Computer INC.' (string) system.board.version = '3.02' (string) system.chassis.manufacturer = 'Hewlett-Packard' (string) system.chassis.type = 'Desktop' (string) system.firmware.release_date = '04/15/2008' (string) system.firmware.vendor = 'Phoenix Technologies, LTD' (string) system.firmware.version = ' 5.11' (string) system.formfactor = 'desktop' (string) system.hardware.primary_video.product = 1057 (0x421) (int) system.hardware.primary_video.vendor = 4318 (0x10de) (int) system.hardware.product = 'KB006AA-B14 m9150.be' (string) system.hardware.serial = 'CZH7510056' (string) system.hardware.uuid = '005F1859-2BE6-5910-A3B5-8ED420432E4B' (string) system.hardware.vendor = 'HP-Pavilion' (string) system.hardware.version = '' (string) system.kernel.machine = 'i686' (string) system.kernel.name = 'Linux' (string) system.kernel.version = '2.6.28-11-generic' (string) system.kernel.version.major = 2 (0x2) (int) system.kernel.version.micro = 28 (0x1c) (int) system.kernel.version.minor = 6 (0x6) (int) udi = '/org/freedesktop/Hal/devices/net_ce_5e_36_6a_a2_50' info.capabilities = {'net', 'net.bridge'} (string list) info.category = 'net.bridge' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Bridge Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_ce_5e_36_6a_a2_50' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/pan0' (string) net.address = 'ce:5e:36:6a:a2:50' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.bridge.mac_address = 226904035205712 (0xce5e366aa250) (uint64) net.interface = 'pan0' (string) net.linux.ifindex = 7 (0x7) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' access_control.file = '/dev/snd/timer' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/timer' (string) alsa.type = 'timer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Timer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string) linux.device_file = '/dev/snd/timer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' access_control.file = '/dev/sequencer2' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string) linux.device_file = '/dev/sequencer2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string) oss.device_file = '/dev/sequencer2' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' access_control.file = '/dev/sequencer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string) linux.device_file = '/dev/sequencer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string) oss.device_file = '/dev/sequencer' (string) oss.type = 'sequencer' (string) udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' access_control.file = '/dev/snd/seq' (string) access_control.type = 'sound' (string) alsa.device_file = '/dev/snd/seq' (string) alsa.type = 'sequencer' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Sequencer Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string) linux.device_file = '/dev/snd/seq' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' access_control.file = '/dev/input/event2' (string) access_control.type = 'mouse' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'input', 'input.mouse', 'access_control'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.device = '/dev/input/event2' (string) input.product = 'Macintosh mouse button emulation' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input2/event2' (string) udi = '/org/freedesktop/Hal/devices/acpi_FAN' fan.enabled = true (bool) info.capabilities = {'fan'} (string list) info.category = 'fan' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Fan' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_FAN' (string) linux.acpi_path = '/proc/acpi/fan/FAN' (string) linux.acpi_type = 2 (0x2) (int) linux.hotplug_type = 4 (0x4) (int) udi = '/org/freedesktop/Hal/devices/acpi_C000' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AMD Phenom(tm) 9500 Quad-Core Processor' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_C000' (string) linux.acpi_path = '/proc/acpi/processor/C000' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/acpi_C001' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AMD Phenom(tm) 9500 Quad-Core Processor' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_C001' (string) linux.acpi_path = '/proc/acpi/processor/C001' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/acpi_C002' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AMD Phenom(tm) 9500 Quad-Core Processor' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_C002' (string) linux.acpi_path = '/proc/acpi/processor/C002' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 2 (0x2) (int) udi = '/org/freedesktop/Hal/devices/acpi_C003' info.capabilities = {'processor'} (string list) info.category = 'processor' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AMD Phenom(tm) 9500 Quad-Core Processor' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_C003' (string) linux.acpi_path = '/proc/acpi/processor/C003' (string) linux.acpi_type = 1 (0x1) (int) linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 3 (0x3) (int) udi = '/org/freedesktop/Hal/devices/net_00_50_56_c0_00_08' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_50_56_c0_00_08' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/vmnet8' (string) net.80203.mac_address = 345052807176 (0x5056c00008) (uint64) net.address = '00:50:56:c0:00:08' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'vmnet8' (string) net.linux.ifindex = 6 (0x6) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/net_00_50_56_c0_00_01' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_50_56_c0_00_01' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/vmnet1' (string) net.80203.mac_address = 345052807169 (0x5056c00001) (uint64) net.address = '00:50:56:c0:00:01' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'vmnet1' (string) net.linux.ifindex = 5 (0x5) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/net_computer_loopback' info.capabilities = {'net', 'net.loopback'} (string list) info.category = 'net.loopback' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Loopback device Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/virtual/net/lo' (string) net.address = '00:00:00:00:00:00' (string) net.arp_proto_hw_id = 772 (0x304) (int) net.interface = 'lo' (string) net.linux.ifindex = 1 (0x1) (int) net.originating_device = '/org/freedesktop/Hal/devices/computer' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (CM)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event1' (string) input.product = 'Power Button (CM)' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (FF)' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event0' (string) input.product = 'Power Button (FF)' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) pnp.description = 'Math Coprocessor' (string) pnp.id = 'PNP0c04' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT-style speaker sound' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) pnp.description = 'AT-style speaker sound' (string) pnp.id = 'PNP0800' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.linux.driver = 'rtc_cmos' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0103)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) pnp.id = 'PNP0103' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PnP Device (PNP0a08)' (string) info.subsystem = 'pnp' (string) info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pnp' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) pnp.id = 'PNP0a08' (string) udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' info.linux.driver = 'vesafb' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (vesafb.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/vesafb.0' (string) platform.id = 'vesafb.0' (string) udi = '/org/freedesktop/Hal/devices/platform_serial8250' info.linux.driver = 'serial8250' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/serial8250' (string) platform.id = 'serial8250' (string) udi = '/org/freedesktop/Hal/devices/platform_regulatory_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (regulatory.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_regulatory_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/regulatory.0' (string) platform.id = 'regulatory.0' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr' info.linux.driver = 'pcspkr' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (pcspkr)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) platform.id = 'pcspkr' (string) udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' info.capabilities = {'input'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) info.product = 'PC Speaker' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string) input.device = '/dev/input/event6' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) input.product = 'PC Speaker' (string) linux.device_file = '/dev/input/event6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input6/event6' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042' info.linux.driver = 'i8042' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (i8042)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/i8042' (string) platform.id = 'i8042' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string) serio.description = 'i8042 AUX port' (string) serio.id = 'serio1' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 KBD port' (string) info.subsystem = 'serio' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'serio' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) serio.description = 'i8042 KBD port' (string) serio.id = 'serio0' (string) udi = '/org/freedesktop/Hal/devices/platform_eisa_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (eisa.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/eisa.0' (string) platform.id = 'eisa.0' (string) udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (Fixed MDIO bus.0)' (string) info.subsystem = 'platform' (string) info.udi = '/org/freedesktop/Hal/devices/platform_Fixed_MDIO_bus_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'platform' (string) linux.sysfs_path = '/sys/devices/platform/Fixed MDIO bus.0' (string) platform.id = 'Fixed MDIO bus.0' (string) udi = '/org/freedesktop/Hal/devices/pci_1022_1204' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Family 10h [Opteron, Athlon64, Sempron] Link Control' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1204' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.4' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.4' (string) pci.product = 'Family 10h [Opteron, Athlon64, Sempron] Link Control' (string) pci.product_id = 4612 (0x1204) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1203' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1203' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string) pci.product = 'Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control' (string) pci.product_id = 4611 (0x1203) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1202' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Family 10h [Opteron, Athlon64, Sempron] DRAM Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1202' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string) pci.product = 'Family 10h [Opteron, Athlon64, Sempron] DRAM Controller' (string) pci.product_id = 4610 (0x1202) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1201' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Family 10h [Opteron, Athlon64, Sempron] Address Map' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1201' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string) pci.product = 'Family 10h [Opteron, Athlon64, Sempron] Address Map' (string) pci.product_id = 4609 (0x1201) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_1022_1200' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1022_1200' (string) info.vendor = 'Advanced Micro Devices [AMD]' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string) pci.product = 'Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration' (string) pci.product_id = 4608 (0x1200) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'Advanced Micro Devices [AMD]' (string) pci.vendor_id = 4130 (0x1022) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3e9_0' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 PCI Express bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3e9_0' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0' (string) pci.product = 'MCP61 PCI Express bridge' (string) pci.product_id = 1001 (0x3e9) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_14f1_8852' info.linux.driver = 'cx23885' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3e9_0' (string) info.product = 'CX23885 PCI Video and Audio Decoder' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_14f1_8852' (string) info.vendor = 'Conexant Systems, Inc.' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0/0000:04:00.0' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0/0000:04:00.0' (string) pci.product = 'CX23885 PCI Video and Audio Decoder' (string) pci.product_id = 34898 (0x8852) (int) pci.subsys_product_id = 29139 (0x71d3) (int) pci.subsys_vendor = 'Hauppauge computer works Inc.' (string) pci.subsys_vendor_id = 112 (0x70) (int) pci.vendor = 'Conexant Systems, Inc.' (string) pci.vendor_id = 5361 (0x14f1) (int) udi = '/org/freedesktop/Hal/devices/pci_14f1_8852_dvb_2' access_control.file = '/dev/dvb/adapter0/net0' (string) access_control.type = 'dvb' (string) dvb.device = '/dev/dvb/adapter0/net0' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'dvb', 'access_control'} (string list) info.category = 'dvb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_14f1_8852' (string) info.product = 'DVB Device' (string) info.subsystem = 'dvb' (string) info.udi = '/org/freedesktop/Hal/devices/pci_14f1_8852_dvb_2' (string) linux.device_file = '/dev/dvb/adapter0/net0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'dvb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0/0000:04:00.0/dvb/dvb0.net0' (string) udi = '/org/freedesktop/Hal/devices/pci_14f1_8852_dvb_1' access_control.file = '/dev/dvb/adapter0/frontend0' (string) access_control.type = 'dvb' (string) dvb.device = '/dev/dvb/adapter0/frontend0' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'dvb', 'access_control'} (string list) info.category = 'dvb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_14f1_8852' (string) info.product = 'DVB Device' (string) info.subsystem = 'dvb' (string) info.udi = '/org/freedesktop/Hal/devices/pci_14f1_8852_dvb_1' (string) linux.device_file = '/dev/dvb/adapter0/frontend0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'dvb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0/0000:04:00.0/dvb/dvb0.frontend0' (string) udi = '/org/freedesktop/Hal/devices/pci_14f1_8852_dvb_0' access_control.file = '/dev/dvb/adapter0/dvr0' (string) access_control.type = 'dvb' (string) dvb.device = '/dev/dvb/adapter0/dvr0' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'dvb', 'access_control'} (string list) info.category = 'dvb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_14f1_8852' (string) info.product = 'DVB Device' (string) info.subsystem = 'dvb' (string) info.udi = '/org/freedesktop/Hal/devices/pci_14f1_8852_dvb_0' (string) linux.device_file = '/dev/dvb/adapter0/dvr0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'dvb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0/0000:04:00.0/dvb/dvb0.dvr0' (string) udi = '/org/freedesktop/Hal/devices/pci_14f1_8852_dvb' access_control.file = '/dev/dvb/adapter0/demux0' (string) access_control.type = 'dvb' (string) dvb.device = '/dev/dvb/adapter0/demux0' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'dvb', 'access_control'} (string list) info.category = 'dvb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_14f1_8852' (string) info.product = 'DVB Device' (string) info.subsystem = 'dvb' (string) info.udi = '/org/freedesktop/Hal/devices/pci_14f1_8852_dvb' (string) linux.device_file = '/dev/dvb/adapter0/demux0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'dvb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0/0000:04:00.0/dvb/dvb0.demux0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3e9' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 PCI Express bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3e9' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string) pci.product = 'MCP61 PCI Express bridge' (string) pci.product_id = 1001 (0x3e9) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3e8' info.linux.driver = 'pcieport-driver' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 PCI Express bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3e8' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string) pci.product = 'MCP61 PCI Express bridge' (string) pci.product_id = 1000 (0x3e8) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_421' info.linux.driver = 'nvidia' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3e8' (string) info.product = 'GeForce 8500 GT' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_421' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/0000:02:00.0' (string) pci.device_class = 3 (0x3) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/0000:02:00.0' (string) pci.product = 'GeForce 8500 GT' (string) pci.product_id = 1057 (0x421) (int) pci.subsys_product_id = 847 (0x34f) (int) pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string) pci.subsys_vendor_id = 4163 (0x1043) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0' info.linux.driver = 'sata_nv' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 SATA Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 133 (0x85) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1' (string) pci.product = 'MCP61 SATA Controller' (string) pci.product_id = 1014 (0x3f6) (int) pci.subsys_product_id = 10860 (0x2a6c) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1/host3' (string) scsi_host.host = 3 (0x3) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1/host3/scsi_host/host3' (string) scsi_host.host = 3 (0x3) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_0_scsi_device_lun0' info.linux.driver = 'sr' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_0' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_0_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1/host3/target3:0:0/3:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 3 (0x3) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'DVD D DH16D2S' (string) scsi.target = 0 (0x0) (int) scsi.type = 'cdrom' (string) scsi.vendor = 'ATAPI' (string) udi = '/org/freedesktop/Hal/devices/storage_model_DVD_D__DH16D2S' access_control.file = '/dev/sr1' (string) access_control.type = 'cdrom' (string) block.device = '/dev/sr1' (string) block.is_volume = false (bool) block.major = 11 (0xb) (int) block.minor = 1 (0x1) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_D__DH16D2S' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_0_scsi_device_lun0' (string) info.product = 'DVD D DH16D2S' (string) info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_D__DH16D2S' (string) info.vendor = 'ATAPI' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1/host3/target3:0:0/3:0:0:0/block/sr1' (string) org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) storage.automount_enabled_hint = true (bool) storage.bus = 'pci' (string) storage.cdrom.bd = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.cdr = false (bool) storage.cdrom.cdrw = false (bool) storage.cdrom.dvd = true (bool) storage.cdrom.dvdplusr = false (bool) storage.cdrom.dvdplusrdl = false (bool) storage.cdrom.dvdplusrw = false (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdr = false (bool) storage.cdrom.dvdram = false (bool) storage.cdrom.dvdrdl = false (bool) storage.cdrom.dvdrw = false (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.mo = false (bool) storage.cdrom.mrw = true (bool) storage.cdrom.mrw_w = true (bool) storage.cdrom.read_speed = 7056 (0x1b90) (int) storage.cdrom.support_media_changed = true (bool) storage.cdrom.support_multisession = true (bool) storage.cdrom.write_speed = 0 (0x0) (int) storage.cdrom.write_speeds = {} (string list) storage.drive_type = 'cdrom' (string) storage.firmware_version = 'EH11' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'DVD D DH16D2S' (string) storage.no_partitions_hint = true (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = true (bool) storage.size = 0 (0x0) (uint64) storage.vendor = 'ATAPI' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_0_scsi_device_lun0_scsi_generic' access_control.file = '/dev/sg3' (string) access_control.type = 'cdrom' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'scsi_generic', 'access_control'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_0_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_0_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1/host3/target3:0:0/3:0:0:0/scsi_generic/sg3' (string) scsi_generic.device = '/dev/sg3' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1/host2' (string) scsi_host.host = 2 (0x2) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1/host2/scsi_host/host2' (string) scsi_host.host = 2 (0x2) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_scsi_device_lun0' info.linux.driver = 'sr' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1/host2/target2:0:0/2:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 2 (0x2) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'CDDVDW TS-H653N' (string) scsi.target = 0 (0x0) (int) scsi.type = 'cdrom' (string) scsi.vendor = 'TSSTcorp' (string) udi = '/org/freedesktop/Hal/devices/storage_model_CDDVDW_TS_H653N' access_control.file = '/dev/sr0' (string) access_control.type = 'cdrom' (string) block.device = '/dev/sr0' (string) block.is_volume = false (bool) block.major = 11 (0xb) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CDDVDW_TS_H653N' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_scsi_device_lun0' (string) info.product = 'CDDVDW TS-H653N' (string) info.udi = '/org/freedesktop/Hal/devices/storage_model_CDDVDW_TS_H653N' (string) info.vendor = 'TSSTcorp' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1/host2/target2:0:0/2:0:0:0/block/sr0' (string) org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) storage.automount_enabled_hint = true (bool) storage.bus = 'pci' (string) storage.cdrom.bd = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.cdr = true (bool) storage.cdrom.cdrw = true (bool) storage.cdrom.dvd = true (bool) storage.cdrom.dvdplusr = true (bool) storage.cdrom.dvdplusrdl = true (bool) storage.cdrom.dvdplusrw = true (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdr = true (bool) storage.cdrom.dvdram = true (bool) storage.cdrom.dvdrdl = true (bool) storage.cdrom.dvdrw = true (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.mo = false (bool) storage.cdrom.mrw = true (bool) storage.cdrom.mrw_w = true (bool) storage.cdrom.read_speed = 2823 (0xb07) (int) storage.cdrom.support_media_changed = true (bool) storage.cdrom.support_multisession = true (bool) storage.cdrom.write_speed = 7056 (0x1b90) (int) storage.drive_type = 'cdrom' (string) storage.firmware_version = '0208' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'CDDVDW TS-H653N' (string) storage.no_partitions_hint = true (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.removable = true (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 3305472 (0x327000) (uint64) storage.removable.support_async_notification = false (bool) storage.requires_eject = true (bool) storage.size = 0 (0x0) (uint64) storage.vendor = 'TSSTcorp' (string) udi = '/org/freedesktop/Hal/devices/volume_label_Razer' block.device = '/dev/sr0' (string) block.is_volume = true (bool) block.major = 11 (0xb) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CDDVDW_TS_H653N' (string) info.capabilities = {'volume.disc', 'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_model_CDDVDW_TS_H653N' (string) info.product = 'Razer' (string) info.udi = '/org/freedesktop/Hal/devices/volume_label_Razer' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1/host2/target2:0:0/2:0:0:0/block/sr0/fakevolume' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 2048 (0x800) (int) volume.disc.capacity = 3305472 (0x327000) (uint64) volume.disc.has_audio = false (bool) volume.disc.has_data = true (bool) volume.disc.is_appendable = false (bool) volume.disc.is_blank = false (bool) volume.disc.is_blurayvideo = false (bool) volume.disc.is_rewritable = false (bool) volume.disc.is_svcd = false (bool) volume.disc.is_vcd = false (bool) volume.disc.is_videodvd = false (bool) volume.disc.type = 'cd_rom' (string) volume.fstype = 'iso9660' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = 'Joliet Extension' (string) volume.ignore = false (bool) volume.is_disc = true (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = true (bool) volume.is_partition = false (bool) volume.label = 'Razer' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'uid=', 'mode=', 'iocharset='} (string list) volume.mount_point = '/media/cdrom0' (string) volume.num_blocks = 6456 (0x1938) (uint64) volume.size = 3305472 (0x327000) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_scsi_device_lun0_scsi_generic' access_control.file = '/dev/sg2' (string) access_control.type = 'cdrom' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'scsi_generic', 'access_control'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_0_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.1/host2/target2:0:0/2:0:0:0/scsi_generic/sg2' (string) scsi_generic.device = '/dev/sg2' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6' info.linux.driver = 'sata_nv' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 SATA Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 133 (0x85) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0' (string) pci.product = 'MCP61 SATA Controller' (string) pci.product_id = 1014 (0x3f6) (int) pci.subsys_product_id = 10860 (0x2a6c) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host1' (string) scsi_host.host = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host1/scsi_host/host1' (string) scsi_host.host = 1 (0x1) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_0_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_0' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_0_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host1/target1:0:0/1:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 1 (0x1) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'WDC WD5000AAKS-6' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS83543102' block.device = '/dev/sdb' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 16 (0x10) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS83543102' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_0_scsi_device_lun0' (string) info.product = 'WDC WD5000AAKS-6' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS83543102' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host1/target1:0:0/1:0:0:0/block/sdb' (string) storage.automount_enabled_hint = false (bool) storage.bus = 'pci' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '12.0' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'WDC WD5000AAKS-6' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 500107862016 (0x7470c06000) (uint64) storage.requires_eject = false (bool) storage.serial = 'SATA_WDC_WD5000AAKS-_WD-WCAS83543102' (string) storage.size = 500107862016 (0x7470c06000) (uint64) storage.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' block.device = '/dev/sdb2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 18 (0x12) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS83543102' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS83543102' (string) info.product = 'Volume' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host1/target1:0:0/1:0:0:0/block/sdb/sdb2' (string) volume.block_size = 512 (0x200) (int) volume.fstype = '' (string) volume.fsusage = 'partitiontable' (string) volume.fsversion = '' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 2 (0x2) (uint64) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 500107862016 (0x7470c06000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 490818908160 (0x7247163000) (uint64) volume.partition.type = '0x05' (string) volume.partition.uuid = '' (string) volume.size = 1024 (0x400) (uint64) volume.uuid = '' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_e3c10780_f28a_4b50_9c91_d288295fdafb' block.device = '/dev/sdb5' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 21 (0x15) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS83543102' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS83543102' (string) info.product = 'Volume (swap)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_e3c10780_f28a_4b50_9c91_d288295fdafb' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host1/target1:0:0/1:0:0:0/block/sdb/sdb5' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'swap' (string) volume.fsusage = 'other' (string) volume.fsversion = '2' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 18137322 (0x114c0ea) (uint64) volume.partition.media_size = 500107862016 (0x7470c06000) (uint64) volume.partition.number = 5 (0x5) (int) volume.partition.start = 490818940416 (0x724716ae00) (uint64) volume.size = 9286308864 (0x22981d400) (uint64) volume.uuid = 'e3c10780-f28a-4b50-9c91-d288295fdafb' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_36e90638_ec48_46af_b575_acafd54151e1' block.device = '/dev/sdb1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 17 (0x11) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS83543102' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS83543102' (string) info.product = 'Volume (ext3)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_36e90638_ec48_46af_b575_acafd54151e1' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host1/target1:0:0/1:0:0:0/block/sdb/sdb1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ext3' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '1.0' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = true (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/' (string) volume.num_blocks = 958630617 (0x39238ad9) (uint64) volume.partition.media_size = 500107862016 (0x7470c06000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.start = 32256 (0x7e00) (uint64) volume.size = 490818875904 (0x724715b200) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '36e90638-ec48-46af-b575-acafd54151e1' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_0_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_0_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_0_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host1/target1:0:0/1:0:0:0/scsi_generic/sg1' (string) scsi_generic.device = '/dev/sg1' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host0/scsi_host/host0' (string) scsi_host.host = 0 (0x0) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host0/target0:0:0/0:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'WDC WD5000AAKS-6' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS82641410' block.device = '/dev/sda' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 0 (0x0) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS82641410' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_scsi_device_lun0' (string) info.product = 'WDC WD5000AAKS-6' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS82641410' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host0/target0:0:0/0:0:0:0/block/sda' (string) storage.automount_enabled_hint = false (bool) storage.bus = 'pci' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '12.0' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'WDC WD5000AAKS-6' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 500107862016 (0x7470c06000) (uint64) storage.requires_eject = false (bool) storage.serial = 'SATA_WDC_WD5000AAKS-_WD-WCAS82641410' (string) storage.size = 500107862016 (0x7470c06000) (uint64) storage.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_2C88743C8874071C' block.device = '/dev/sda4' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 4 (0x4) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS82641410' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS82641410' (string) info.product = 'FACTORY_IMAGE' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_2C88743C8874071C' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host0/target0:0:0/0:0:0:0/block/sda/sda4' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ntfs-3g' (string) volume.fstype.alternative = 'ntfs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '3.1' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = 'FACTORY_IMAGE' (string) volume.linux.is_device_mapper = false (bool) volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list) volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list) volume.mount_point = '' (string) volume.num_blocks = 16691535 (0xfeb14f) (uint64) volume.partition.media_size = 500107862016 (0x7470c06000) (uint64) volume.partition.number = 4 (0x4) (int) volume.partition.start = 491559183360 (0x727335e400) (uint64) volume.policy.mount_filesystem = 'ntfs-3g' (string) volume.size = 8546065920 (0x1fd629e00) (uint64) volume.unmount.ntfs.valid_options = {'lazy'} (string list) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '2C88743C8874071C' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_E636C9DE36C9B03B' block.device = '/dev/sda1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 1 (0x1) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS82641410' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD5000AAKS__WD_WCAS82641410' (string) info.product = 'HP' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_E636C9DE36C9B03B' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host0/target0:0:0/0:0:0:0/block/sda/sda1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) volume.block_size = 512 (0x200) (int) volume.fstype = 'ntfs-3g' (string) volume.fstype.alternative = 'ntfs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '3.1' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = 'HP' (string) volume.linux.is_device_mapper = false (bool) volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list) volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list) volume.mount_point = '' (string) volume.num_blocks = 960076467 (0x39399ab3) (uint64) volume.partition.media_size = 500107862016 (0x7470c06000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.start = 32256 (0x7e00) (uint64) volume.policy.mount_filesystem = 'ntfs-3g' (string) volume.size = 491559151104 (0x7273356600) (uint64) volume.unmount.ntfs.valid_options = {'lazy'} (string list) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = 'E636C9DE36C9B03B' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f6_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0' (string) scsi_generic.device = '/dev/sg0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3ef' info.linux.driver = 'forcedeth' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 Ethernet' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3ef' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0' (string) pci.product = 'MCP61 Ethernet' (string) pci.product_id = 1007 (0x3ef) (int) pci.subsys_product_id = 10860 (0x2a6c) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/net_00_1e_8c_5b_fc_bd' info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list) info.category = 'net.80203' (string) info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3ef' (string) info.product = 'Networking Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_1e_8c_5b_fc_bd' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/net/eth0' (string) net.80203.mac_address = 131203857597 (0x1e8c5bfcbd) (uint64) net.address = '00:1e:8c:5b:fc:bd' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'eth0' (string) net.linux.ifindex = 2 (0x2) (int) net.originating_device = '/org/freedesktop/Hal/devices/pci_10de_3ef' (string) org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list) org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list) udi = '/org/freedesktop/Hal/devices/pci_10de_3ec' info.linux.driver = 'pata_amd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 IDE' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3ec' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0' (string) pci.device_class = 1 (0x1) (int) pci.device_protocol = 138 (0x8a) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0' (string) pci.product = 'MCP61 IDE' (string) pci.product_id = 1004 (0x3ec) (int) pci.subsys_product_id = 10860 (0x2a6c) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3ec_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3ec' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3ec_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/host5/scsi_host/host5' (string) scsi_host.host = 5 (0x5) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3ec_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3ec' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3ec_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/host4/scsi_host/host4' (string) scsi_host.host = 4 (0x4) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f0' info.linux.driver = 'HDA Intel' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 High Definition Audio' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f0' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0' (string) pci.device_class = 4 (0x4) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0' (string) pci.product = 'MCP61 High Definition Audio' (string) pci.product_id = 1008 (0x3f0) (int) pci.subsys_product_id = 10860 (0x2a6c) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' info.capabilities = {'sound'} (string list) info.category = 'sound' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f0' (string) info.product = 'HDA NVidia Sound Card' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/sound/card0' (string) sound.card = 0 (0x0) (int) sound.card_id = 'HDA NVidia' (string) sound.originating_device = '/org/freedesktop/Hal/devices/pci_10de_3f0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_alsa_capture_2' access_control.file = '/dev/snd/pcmC0D2c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device = 2 (0x2) (int) alsa.device_file = '/dev/snd/pcmC0D2c' (string) alsa.device_id = 'ALC1200 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) info.product = 'ALC1200 Analog ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_alsa_capture_2' (string) linux.device_file = '/dev/snd/pcmC0D2c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/sound/card0/pcmC0D2c' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_alsa_playback_1' access_control.file = '/dev/snd/pcmC0D1p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device = 1 (0x1) (int) alsa.device_file = '/dev/snd/pcmC0D1p' (string) alsa.device_id = 'ALC1200 Digital' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) info.product = 'ALC1200 Digital ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_alsa_playback_1' (string) linux.device_file = '/dev/snd/pcmC0D1p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/sound/card0/pcmC0D1p' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_alsa_playback_0' access_control.file = '/dev/snd/pcmC0D0p' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0p' (string) alsa.device_id = 'ALC1200 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'playback' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) info.product = 'ALC1200 Analog ALSA Playback Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_alsa_playback_0' (string) linux.device_file = '/dev/snd/pcmC0D0p' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/sound/card0/pcmC0D0p' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_oss_pcm_0' access_control.file = '/dev/audio' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) info.product = 'ALC1200 Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_oss_pcm_0' (string) linux.device_file = '/dev/audio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/sound/card0/audio' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA NVidia' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/audio' (string) oss.device_id = 'ALC1200 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_alsa_capture_0' access_control.file = '/dev/snd/pcmC0D0c' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device = 0 (0x0) (int) alsa.device_file = '/dev/snd/pcmC0D0c' (string) alsa.device_id = 'ALC1200 Analog' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) alsa.pcm_class = 'generic' (string) alsa.type = 'capture' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) info.product = 'ALC1200 Analog ALSA Capture Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_alsa_capture_0' (string) linux.device_file = '/dev/snd/pcmC0D0c' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/sound/card0/pcmC0D0c' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_oss_mixer__1' access_control.file = '/dev/mixer' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) info.product = 'ALC1200 Analog OSS Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_oss_mixer__1' (string) linux.device_file = '/dev/mixer' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/sound/card0/mixer' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA NVidia' (string) oss.device_file = '/dev/mixer' (string) oss.device_id = 'ALC1200 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) oss.type = 'mixer' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_oss_pcm_0_0' access_control.file = '/dev/dsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) info.product = 'ALC1200 Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_oss_pcm_0_0' (string) linux.device_file = '/dev/dsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/sound/card0/dsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA NVidia' (string) oss.device = 0 (0x0) (int) oss.device_file = '/dev/dsp' (string) oss.device_id = 'ALC1200 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_alsa_control__1' access_control.file = '/dev/snd/controlC0' (string) access_control.type = 'sound' (string) alsa.card = 0 (0x0) (int) alsa.card_id = 'HDA NVidia' (string) alsa.device_file = '/dev/snd/controlC0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) alsa.type = 'control' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'alsa', 'access_control'} (string list) info.category = 'alsa' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) info.product = 'HDA NVidia ALSA Control Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_alsa_control__1' (string) linux.device_file = '/dev/snd/controlC0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/sound/card0/controlC0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_oss_pcm_1' access_control.file = '/dev/adsp' (string) access_control.type = 'sound' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'oss', 'access_control'} (string list) info.category = 'oss' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) info.product = 'ALC1200 Analog OSS PCM Device' (string) info.subsystem = 'sound' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0_oss_pcm_1' (string) linux.device_file = '/dev/adsp' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'sound' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0/sound/card0/adsp' (string) oss.card = 0 (0x0) (int) oss.card_id = 'HDA NVidia' (string) oss.device = 1 (0x1) (int) oss.device_file = '/dev/adsp' (string) oss.device_id = 'ALC1200 Analog' (string) oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_3f0_sound_card_0' (string) oss.type = 'pcm' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_3f3' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 PCI bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f3' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 1 (0x1) (int) pci.device_subclass = 4 (0x4) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' (string) pci.product = 'MCP61 PCI bridge' (string) pci.product_id = 1011 (0x3f3) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_11c1_5811' info.linux.driver = 'ohci1394' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f3' (string) info.product = 'FW323' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_11c1_5811' (string) info.vendor = 'Agere Systems' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/0000:01:05.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/0000:01:05.0' (string) pci.product = 'FW323' (string) pci.product_id = 22545 (0x5811) (int) pci.subsys_product_id = 10860 (0x2a6c) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'Agere Systems' (string) pci.vendor_id = 4545 (0x11c1) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3f2' info.linux.driver = 'ehci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 USB Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f2' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string) pci.product = 'MCP61 USB Controller' (string) pci.product_id = 1010 (0x3f2) (int) pci.subsys_product_id = 10860 (0x2a6c) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f2' (string) info.product = '2.0 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/001/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 10 (0xa) (int) usb_device.product = '2.0 root hub' (string) usb_device.product_id = 2 (0x2) (int) usb_device.serial = '0000:00:02.1' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1' (string) info.product = 'USB-2.0 4-Port HUB' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' (string) info.vendor = 'Genesys Logic, Inc.' (string) linux.device_file = '/dev/bus/usb/001/004' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_revision_bcd = 1794 (0x702) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 4 (0x4) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 4 (0x4) (int) usb_device.product = 'USB-2.0 4-Port HUB' (string) usb_device.product_id = 1544 (0x608) (int) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Genesys Logic, Inc.' (string) usb_device.vendor_id = 1507 (0x5e3) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 1 (0x1) (int) usb.device_revision_bcd = 1794 (0x702) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 4 (0x4) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 4 (0x4) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1544 (0x608) (int) usb.speed = 480.0 (480) (double) usb.vendor = 'Genesys Logic, Inc.' (string) usb.vendor_id = 1507 (0x5e3) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' (string) info.product = 'Mass Stroage Device' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000' (string) info.vendor = 'Realtek Semiconductor Corp.' (string) linux.device_file = '/dev/bus/usb/001/007' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = false (bool) usb_device.configuration = 'CARD READER' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 20885 (0x5195) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 7 (0x7) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2' (string) usb_device.max_power = 500 (0x1f4) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Mass Stroage Device' (string) usb_device.product_id = 337 (0x151) (int) usb_device.serial = '20060413092100000' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Realtek Semiconductor Corp.' (string) usb_device.vendor_id = 3034 (0xbda) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0' info.linux.driver = 'usb-storage' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000' (string) info.product = 'USB Mass Storage Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration = 'CARD READER' (string) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 20885 (0x5195) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 8 (0x8) (int) usb.interface.description = 'Bulk-In, Bulk-Out, Interface' (string) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 80 (0x50) (int) usb.interface.subclass = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 7 (0x7) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0' (string) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Mass Storage Interface' (string) usb.product_id = 337 (0x151) (int) usb.serial = '20060413092100000' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Realtek Semiconductor Corp.' (string) usb.vendor_id = 3034 (0xbda) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6' (string) scsi_host.host = 6 (0x6) (int) udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/scsi_host/host6' (string) scsi_host.host = 6 (0x6) (int) udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun3' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/target6:0:0/6:0:0:3' (string) scsi.bus = 0 (0x0) (int) scsi.host = 6 (0x6) (int) scsi.lun = 3 (0x3) (int) scsi.model = 'MS/MS-Pro' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'Generic-' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__MS_MS_Pro_20060413092100000_0_3' access_control.file = '/dev/sdf' (string) access_control.type = 'removable-block' (string) block.device = '/dev/sdf' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 80 (0x50) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Generic__MS_MS_Pro_20060413092100000_0_3' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun3' (string) info.product = 'MS/MS-Pro' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__MS_MS_Pro_20060413092100000_0_3' (string) info.vendor = 'Generic-' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/target6:0:0/6:0:0:3/block/sdf' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'usb' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '1.00' (string) storage.hotpluggable = true (bool) storage.lun = 3 (0x3) (int) storage.media_check_enabled = true (bool) storage.model = 'MS/MS-Pro' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = false (bool) storage.serial = 'Generic-_MS_MS-Pro_20060413092100000-0:3' (string) storage.size = 0 (0x0) (uint64) storage.vendor = 'Generic-' (string) udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun3_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun3' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun3_scsi_generic' (string) linux.device_file = '/dev/sg7' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/target6:0:0/6:0:0:3/scsi_generic/sg7' (string) scsi_generic.device = '/dev/sg7' (string) udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun2' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/target6:0:0/6:0:0:2' (string) scsi.bus = 0 (0x0) (int) scsi.host = 6 (0x6) (int) scsi.lun = 2 (0x2) (int) scsi.model = 'SD/MMC' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'Generic-' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__SD_MMC_20060413092100000_0_2' access_control.file = '/dev/sde' (string) access_control.type = 'removable-block' (string) block.device = '/dev/sde' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 64 (0x40) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Generic__SD_MMC_20060413092100000_0_2' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun2' (string) info.product = 'SD/MMC' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__SD_MMC_20060413092100000_0_2' (string) info.vendor = 'Generic-' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/target6:0:0/6:0:0:2/block/sde' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'usb' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '1.00' (string) storage.hotpluggable = true (bool) storage.lun = 2 (0x2) (int) storage.media_check_enabled = true (bool) storage.model = 'SD/MMC' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = false (bool) storage.serial = 'Generic-_SD_MMC_20060413092100000-0:2' (string) storage.size = 0 (0x0) (uint64) storage.vendor = 'Generic-' (string) udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun2_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun2' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun2_scsi_generic' (string) linux.device_file = '/dev/sg6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/target6:0:0/6:0:0:2/scsi_generic/sg6' (string) scsi_generic.device = '/dev/sg6' (string) udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun1' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/target6:0:0/6:0:0:1' (string) scsi.bus = 0 (0x0) (int) scsi.host = 6 (0x6) (int) scsi.lun = 1 (0x1) (int) scsi.model = 'SM/xD-Picture' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'Generic-' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__SM_xD_Picture_20060413092100000_0_1' access_control.file = '/dev/sdd' (string) access_control.type = 'removable-block' (string) block.device = '/dev/sdd' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 48 (0x30) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Generic__SM_xD_Picture_20060413092100000_0_1' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun1' (string) info.product = 'SM/xD-Picture' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__SM_xD_Picture_20060413092100000_0_1' (string) info.vendor = 'Generic-' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/target6:0:0/6:0:0:1/block/sdd' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'usb' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '1.00' (string) storage.hotpluggable = true (bool) storage.lun = 1 (0x1) (int) storage.media_check_enabled = true (bool) storage.model = 'SM/xD-Picture' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = false (bool) storage.serial = 'Generic-_SM_xD-Picture_20060413092100000-0:1' (string) storage.size = 0 (0x0) (uint64) storage.vendor = 'Generic-' (string) udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun1_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun1' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun1_scsi_generic' (string) linux.device_file = '/dev/sg5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/target6:0:0/6:0:0:1/scsi_generic/sg5' (string) scsi_generic.device = '/dev/sg5' (string) udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/target6:0:0/6:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 6 (0x6) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'Compact Flash' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'Generic-' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__Compact_Flash_20060413092100000_0_0' access_control.file = '/dev/sdc' (string) access_control.type = 'removable-block' (string) block.device = '/dev/sdc' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 32 (0x20) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Generic__Compact_Flash_20060413092100000_0_0' (string) info.addons = {'hald-addon-storage'} (string list) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'storage', 'block', 'access_control'} (string list) info.category = 'storage' (string) info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun0' (string) info.product = 'Compact Flash' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_Generic__Compact_Flash_20060413092100000_0_0' (string) info.vendor = 'Generic-' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/target6:0:0/6:0:0:0/block/sdc' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'usb' (string) storage.drive_type = 'disk' (string) storage.firmware_version = '1.00' (string) storage.hotpluggable = true (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = true (bool) storage.model = 'Compact Flash' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0' (string) storage.partitioning_scheme = '' (string) storage.removable = true (bool) storage.removable.media_available = false (bool) storage.removable.support_async_notification = false (bool) storage.requires_eject = false (bool) storage.serial = 'Generic-_Compact_Flash_20060413092100000-0:0' (string) storage.size = 0 (0x0) (uint64) storage.vendor = 'Generic-' (string) udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_bda_151_20060413092100000_if0_scsi_host_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.2/1-8.2:1.0/host6/target6:0:0/6:0:0:0/scsi_generic/sg4' (string) scsi_generic.device = '/dev/sg4' (string) udi = '/org/freedesktop/Hal/devices/usb_device_147a_e018_0000C849' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' (string) info.product = 'Beanbag Emulation Device' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_147a_e018_0000C849' (string) info.vendor = 'Formosa Industrial Computing, Inc.' (string) linux.device_file = '/dev/bus/usb/001/006' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 112 (0x70) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 6 (0x6) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Beanbag Emulation Device' (string) usb_device.product_id = 57368 (0xe018) (int) usb_device.serial = '0000C849' (string) usb_device.speed = 1.5 (1.5) (double) usb_device.vendor = 'Formosa Industrial Computing, Inc.' (string) usb_device.vendor_id = 5242 (0x147a) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_147a_e018_0000C849_if1' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_147a_e018_0000C849' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_147a_e018_0000C849_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.1/1-8.1:1.1' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 112 (0x70) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 6 (0x6) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.1/1-8.1:1.1' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 57368 (0xe018) (int) usb.serial = '0000C849' (string) usb.speed = 1.5 (1.5) (double) usb.vendor = 'Formosa Industrial Computing, Inc.' (string) usb.vendor_id = 5242 (0x147a) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_147a_e018_0000C849_if0' info.linux.driver = 'lirc_mceusb2' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_147a_e018_0000C849' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_147a_e018_0000C849_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.1/1-8.1:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 112 (0x70) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 255 (0xff) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 255 (0xff) (int) usb.interface.subclass = 255 (0xff) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 6 (0x6) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-8/1-8.1/1-8.1:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 57368 (0xe018) (int) usb.serial = '0000C849' (string) usb.speed = 1.5 (1.5) (double) usb.vendor = 'Formosa Industrial Computing, Inc.' (string) usb.vendor_id = 5242 (0x147a) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_15a9_4_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1' (string) info.product = '802.11 bg WLAN' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_15a9_4_noserial' (string) info.vendor = 'Ralink' (string) linux.device_file = '/dev/bus/usb/001/005' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-10' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 1 (0x1) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 5 (0x5) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-10' (string) usb_device.max_power = 300 (0x12c) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = '802.11 bg WLAN' (string) usb_device.product_id = 4 (0x4) (int) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Ralink' (string) usb_device.vendor_id = 5545 (0x15a9) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_15a9_4_noserial_if0' info.linux.driver = 'rt73usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_15a9_4_noserial' (string) info.product = 'USB Vendor Specific Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_15a9_4_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 1 (0x1) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 255 (0xff) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 255 (0xff) (int) usb.interface.subclass = 255 (0xff) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 5 (0x5) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.0' (string) usb.max_power = 300 (0x12c) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 4 (0x4) (int) usb.speed = 480.0 (480) (double) usb.vendor = 'Ralink' (string) usb.vendor_id = 5545 (0x15a9) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/net_00_16_44_7c_95_d3_0' info.capabilities = {'net', 'net.80211control'} (string list) info.category = 'net.80211control' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_15a9_4_noserial_if0' (string) info.product = 'Networking Wireless Control Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_16_44_7c_95_d3_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.0/net/wmaster0' (string) net.address = '00:16:44:7c:95:d3' (string) net.arp_proto_hw_id = 801 (0x321) (int) net.interface = 'wmaster0' (string) net.linux.ifindex = 3 (0x3) (int) net.originating_device = '/org/freedesktop/Hal/devices/usb_device_15a9_4_noserial_if0' (string) udi = '/org/freedesktop/Hal/devices/net_00_16_44_7c_95_d3' info.capabilities = {'net', 'net.80211'} (string list) info.category = 'net.80211' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_15a9_4_noserial_if0' (string) info.product = 'WLAN Interface' (string) info.subsystem = 'net' (string) info.udi = '/org/freedesktop/Hal/devices/net_00_16_44_7c_95_d3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'net' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.0/net/wlan0' (string) net.80211.mac_address = 95638296019 (0x16447c95d3) (uint64) net.address = '00:16:44:7c:95:d3' (string) net.arp_proto_hw_id = 1 (0x1) (int) net.interface = 'wlan0' (string) net.linux.ifindex = 4 (0x4) (int) net.originating_device = '/org/freedesktop/Hal/devices/usb_device_15a9_4_noserial_if0' (string) udi = '/org/freedesktop/Hal/devices/leds_rt73usb_phy0_radio' info.addons.singleton = {'hald-addon-leds'} (string list) info.capabilities = {'leds'} (string list) info.category = 'leds' (string) info.interfaces = {'org.freedesktop.Hal.Device.Leds'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_15a9_4_noserial_if0' (string) info.subsystem = 'leds' (string) info.udi = '/org/freedesktop/Hal/devices/leds_rt73usb_phy0_radio' (string) leds.device_name = 'rt73usb-phy0' (string) leds.function = 'radio' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.0/leds/rt73usb-phy0::radio' (string) udi = '/org/freedesktop/Hal/devices/leds_rt73usb_phy0_quali' info.addons.singleton = {'hald-addon-leds'} (string list) info.capabilities = {'leds'} (string list) info.category = 'leds' (string) info.interfaces = {'org.freedesktop.Hal.Device.Leds'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_15a9_4_noserial_if0' (string) info.subsystem = 'leds' (string) info.udi = '/org/freedesktop/Hal/devices/leds_rt73usb_phy0_quali' (string) leds.device_name = 'rt73usb-phy0' (string) leds.function = 'quali' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.0/leds/rt73usb-phy0::quali' (string) udi = '/org/freedesktop/Hal/devices/leds_rt73usb_phy0_assoc' info.addons.singleton = {'hald-addon-leds'} (string list) info.capabilities = {'leds'} (string list) info.category = 'leds' (string) info.interfaces = {'org.freedesktop.Hal.Device.Leds'} (string list) info.parent = '/org/freedesktop/Hal/devices/usb_device_15a9_4_noserial_if0' (string) info.subsystem = 'leds' (string) info.udi = '/org/freedesktop/Hal/devices/leds_rt73usb_phy0_assoc' (string) leds.device_name = 'rt73usb-phy0' (string) leds.function = 'assoc' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'leds' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.0/leds/rt73usb-phy0::assoc' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 10 (0xa) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 2 (0x2) (int) usb.serial = '0000:00:02.1' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/pci_10de_3f1' info.linux.driver = 'ohci_hcd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 USB Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f1' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 3 (0x3) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string) pci.product = 'MCP61 USB Controller' (string) pci.product_id = 1009 (0x3f1) (int) pci.subsys_product_id = 10860 (0x2a6c) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3f1' (string) info.product = '1.1 root hub' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0' (string) info.vendor = 'Linux Foundation' (string) linux.device_file = '/dev/bus/usb/002/001' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 10 (0xa) (int) usb_device.product = '1.1 root hub' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:02.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux Foundation' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0' (string) info.product = 'Razer Arctosa' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial' (string) info.vendor = 'Razer USA, Ltd' (string) linux.device_file = '/dev/bus/usb/002/003' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 2 (0x2) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 3 (0x3) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Razer Arctosa' (string) usb_device.product_id = 267 (0x10b) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Razer USA, Ltd' (string) usb_device.vendor_id = 5426 (0x1532) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial_if1' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial_if1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 2 (0x2) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 1 (0x1) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 267 (0x10b) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Razer USA, Ltd' (string) usb.vendor_id = 5426 (0x1532) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial_if1_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial_if1' (string) info.product = 'Razer Razer Arctosa' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial_if1_logicaldev_input' (string) input.device = '/dev/input/event5' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial_if1' (string) input.product = 'Razer Razer Arctosa' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'lv3:ralt_switch' (string) input.xkb.rules = 'evdev' (string) input.xkb.variant = 'intl' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input5/event5' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial_if0' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 2 (0x2) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 1 (0x1) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 3 (0x3) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 267 (0x10b) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Razer USA, Ltd' (string) usb.vendor_id = 5426 (0x1532) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial_if0_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial_if0' (string) info.product = 'Razer Razer Arctosa' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event4' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_1532_10b_noserial_if0' (string) input.product = 'Razer Razer Arctosa' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'lv3:ralt_switch' (string) input.xkb.rules = 'evdev' (string) input.xkb.variant = 'intl' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4/event4' (string) udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0' (string) info.product = 'M-UV69a/HP M-UV96 Optical Wheel Mouse' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial' (string) info.vendor = 'Logitech, Inc.' (string) linux.device_file = '/dev/bus/usb/002/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-1' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 832 (0x340) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'M-UV69a/HP M-UV96 Optical Wheel Mouse' (string) usb_device.product_id = 49174 (0xc016) (int) usb_device.speed = 1.5 (1.5) (double) usb_device.vendor = 'Logitech, Inc.' (string) usb_device.vendor_id = 1133 (0x46d) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0' info.linux.driver = 'usbhid' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial' (string) info.product = 'USB HID Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 832 (0x340) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 3 (0x3) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 2 (0x2) (int) usb.interface.subclass = 1 (0x1) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB HID Interface' (string) usb.product_id = 49174 (0xc016) (int) usb.speed = 1.5 (1.5) (double) usb.vendor = 'Logitech, Inc.' (string) usb.vendor_id = 1133 (0x46d) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0_logicaldev_input' access_control.file = '/dev/input/event3' (string) access_control.type = 'mouse' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'input', 'input.mouse', 'access_control'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0' (string) info.product = 'Logitech Optical USB Mouse' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event3' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0' (string) input.product = 'Logitech Optical USB Mouse' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input3/event3' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0_if0' info.linux.driver = 'hub' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0' (string) info.product = 'USB Hub Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 10 (0xa) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:02.0' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux Foundation' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/pci_10de_3f5' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 Memory Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3f5' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.2' (string) pci.device_class = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.2' (string) pci.product = 'MCP61 Memory Controller' (string) pci.product_id = 1013 (0x3f5) (int) pci.subsys_product_id = 10860 (0x2a6c) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3eb' info.linux.driver = 'nForce2_smbus' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 SMBus' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3eb' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1' (string) pci.device_class = 12 (0xc) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 5 (0x5) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1' (string) pci.product = 'MCP61 SMBus' (string) pci.product_id = 1003 (0x3eb) (int) pci.subsys_product_id = 10860 (0x2a6c) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3e0' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 LPC Bridge' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3e0' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.device_class = 6 (0x6) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 1 (0x1) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.product = 'MCP61 LPC Bridge' (string) pci.product_id = 992 (0x3e0) (int) pci.subsys_product_id = 10860 (0x2a6c) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/pci_10de_3ea' info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'MCP61 Memory Controller' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10de_3ea' (string) info.vendor = 'nVidia Corporation' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'pci' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.device_class = 5 (0x5) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.product = 'MCP61 Memory Controller' (string) pci.product_id = 1002 (0x3ea) (int) pci.subsys_product_id = 10860 (0x2a6c) (int) pci.subsys_vendor = 'Hewlett-Packard Company' (string) pci.subsys_vendor_id = 4156 (0x103c) (int) pci.vendor = 'nVidia Corporation' (string) pci.vendor_id = 4318 (0x10de) (int) udi = '/org/freedesktop/Hal/devices/fuse' access_control.file = '/dev/fuse' (string) access_control.type = 'camera' (string) info.callouts.add = {'hal-acl-tool --add-device'} (string list) info.callouts.remove = {'hal-acl-tool --remove-device'} (string list) info.capabilities = {'access_control'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_10de_3ea' (string) info.subsystem = 'unknown' (string) info.udi = '/org/freedesktop/Hal/devices/fuse' (string) Dumped 144 device(s) from the Global Device List. ------------------------------------------------