____________________________________________ Start of NVIDIA bug report log file. Please send this report, along with a description of your bug, to linux-bugs@nvidia.com. nvidia-bug-report.sh Version: 2445528 Date: Thu Nov 6 08:06:33 MST 2008 uname: Linux goodkind 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686 GNU/Linux ____________________________________________ /proc/driver/nvidia/version NVRM version: NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 GCC version: gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ____________________________________________ /proc/driver/nvidia/cards/0 Model: GeForce 7600 GS IRQ: 16 Video BIOS: 05.73.22.37.01 Card Type: AGP DMA Size: 32 bits DMA Mask: 0xffffffff Bus Location: 01.00.0 ____________________________________________ /proc/driver/nvidia/agp/card Fast Writes: Supported SBA: Supported AGP Rates: 4x 2x 1x Registers: 0x1f000217:0x1f000104 ____________________________________________ /proc/driver/nvidia/agp/host-bridge Host Bridge: PCI device 8086:2560 Fast Writes: Supported SBA: Supported AGP Rates: 4x 2x 1x Registers: 0x1f000217:0x00000104 ____________________________________________ /proc/driver/nvidia/agp/status Status: Enabled Driver: AGPGART AGP Rate: 4x Fast Writes: Disabled SBA: Disabled ____________________________________________ /proc/driver/nvidia/warnings/README The NVIDIA graphics driver tries to detect potential problems with the host system and warns about them using the system's logging mechanisms. Important warning message are also logged to dedicated text files in this directory. ____________________________________________ /proc/driver/nvidia/registry EnableVia4x: 0 EnableALiAGP: 0 NvAGP: 3 ReqAGPRate: 15 EnableAGPSBA: 0 EnableAGPFW: 0 Mobile: 4294967295 ResmanDebugLevel: 4294967295 RmLogonRC: 1 ModifyDeviceFiles: 1 DeviceFileUID: 0 DeviceFileGID: 0 DeviceFileMode: 438 RemapLimit: 0 UpdateMemoryTypes: 4294967295 UseVBios: 1 RMEdgeIntrCheck: 1 UsePageAttributeTable: 4294967295 EnableMSI: 0 ____________________________________________ /proc/cmdline root=UUID=0b2592b2-4876-4c46-b1f7-1191c53c0432 ro quiet splash ____________________________________________ /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.40GHz stepping : 4 cpu MHz : 2418.669 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm up pebs bts bogomips : 4837.33 clflush size : 64 power management: ____________________________________________ /proc/interrupts CPU0 0: 150 IO-APIC-edge timer 1: 4675 IO-APIC-edge i8042 4: 2 IO-APIC-edge 7: 0 IO-APIC-edge parport0 8: 2 IO-APIC-edge rtc0 9: 0 IO-APIC-fasteoi acpi 14: 80425 IO-APIC-edge ata_piix 15: 265685 IO-APIC-edge ata_piix 16: 2711228 IO-APIC-fasteoi uhci_hcd:usb2, nvidia 18: 0 IO-APIC-fasteoi uhci_hcd:usb4 19: 0 IO-APIC-fasteoi uhci_hcd:usb3 20: 2 IO-APIC-fasteoi ohci1394 21: 1225 IO-APIC-fasteoi CMI8738-MC6 23: 86134 IO-APIC-fasteoi ehci_hcd:usb1, eth0 NMI: 0 Non-maskable interrupts LOC: 735665 Local timer interrupts RES: 0 Rescheduling interrupts CAL: 0 function call interrupts TLB: 0 TLB shootdowns SPU: 0 Spurious interrupts ERR: 0 MIS: 0 ____________________________________________ /proc/meminfo MemTotal: 1293356 kB MemFree: 427368 kB Buffers: 116064 kB Cached: 376028 kB SwapCached: 0 kB Active: 493988 kB Inactive: 290164 kB HighTotal: 393152 kB HighFree: 744 kB LowTotal: 900204 kB LowFree: 426624 kB SwapTotal: 3783268 kB SwapFree: 3783268 kB Dirty: 240 kB Writeback: 0 kB AnonPages: 292060 kB Mapped: 74696 kB Slab: 50360 kB SReclaimable: 35636 kB SUnreclaim: 14724 kB PageTables: 2508 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 4429944 kB Committed_AS: 712868 kB VmallocTotal: 110584 kB VmallocUsed: 47016 kB VmallocChunk: 60404 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 24576 kB DirectMap4M: 892928 kB ____________________________________________ /proc/modules nls_iso8859_1 12032 0 - Live 0xf8de4000 nls_cp437 13696 0 - Live 0xf8ef9000 vfat 18816 0 - Live 0xf8eec000 fat 57376 1 vfat, Live 0xf8f3f000 usb_storage 81728 0 - Live 0xf8f2a000 libusual 27156 1 usb_storage, Live 0xf8f07000 ipv6 263972 12 - Live 0xf8f50000 binfmt_misc 16904 1 - Live 0xf8ef3000 af_packet 25728 2 - Live 0xf8def000 bridge 56980 0 - Live 0xf8df9000 stp 10628 1 bridge, Live 0xf8dda000 bnep 20480 2 - Live 0xf8dde000 rfcomm 44432 0 - Live 0xf8da8000 sco 18308 2 - Live 0xf8dcf000 l2cap 30464 6 bnep,rfcomm, Live 0xf8db4000 bluetooth 61924 6 bnep,rfcomm,sco,l2cap, Live 0xf8dbe000 ppdev 15620 0 - Live 0xf8d8f000 speedstep_lib 12676 0 - Live 0xf8da3000 cpufreq_userspace 11396 0 - Live 0xf8d9f000 cpufreq_conservative 14600 0 - Live 0xf8d9a000 cpufreq_stats 13188 0 - Live 0xf8d95000 cpufreq_ondemand 14988 0 - Live 0xf8d74000 freq_table 12672 2 cpufreq_stats,cpufreq_ondemand, Live 0xf8d81000 cpufreq_powersave 9856 0 - Live 0xf8d7d000 video 25104 0 - Live 0xf8d87000 output 11008 1 video, Live 0xf8d79000 wmi 14504 0 - Live 0xf8d6b000 container 11520 0 - Live 0xf8d70000 sbs 19464 0 - Live 0xf8d60000 sbshc 13440 1 sbs, Live 0xf8d66000 pci_slot 12552 0 - Live 0xf8adb000 battery 18436 0 - Live 0xf8b7b000 iptable_filter 10752 0 - Live 0xf8b77000 ip_tables 19600 1 iptable_filter, Live 0xf8d5a000 x_tables 22916 1 ip_tables, Live 0xf8b0c000 ac 12292 0 - Live 0xf8af1000 sbp2 29324 0 - Live 0xf8b82000 lp 17156 0 - Live 0xf8b13000 snd_cmipci 42400 3 - Live 0xf8b29000 pcspkr 10624 0 - Live 0xf8ae0000 gameport 19468 1 snd_cmipci, Live 0xf8aeb000 snd_pcm_oss 46848 0 - Live 0xf8b1c000 snd_mixer_oss 22784 1 snd_pcm_oss, Live 0xf8ae4000 snd_pcm 83204 2 snd_cmipci,snd_pcm_oss, Live 0xf8af6000 evdev 17696 6 - Live 0xf8ace000 snd_page_alloc 16136 1 snd_pcm, Live 0xf8abe000 snd_opl3_lib 18560 1 snd_cmipci, Live 0xf8ad5000 snd_hwdep 15236 1 snd_opl3_lib, Live 0xf8aa6000 snd_mpu401_uart 15360 1 snd_cmipci, Live 0xf8ab9000 snd_seq_dummy 10884 0 - Live 0xf8ab5000 usblp 20480 0 - Live 0xf8a4b000 snd_seq_oss 38528 0 - Live 0xf8ac3000 snd_seq_midi 14336 0 - Live 0xf8aa1000 snd_rawmidi 29824 2 snd_mpu401_uart,snd_seq_midi, Live 0xf8aac000 snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi, Live 0xf8a9c000 snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event, Live 0xf8a5b000 snd_timer 29960 3 snd_pcm,snd_opl3_lib,snd_seq, Live 0xf8a93000 snd_seq_device 15116 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq, Live 0xf8a56000 parport_pc 39204 1 - Live 0xf8a88000 parport 42604 3 ppdev,lp,parport_pc, Live 0xf8a7c000 snd 63268 18 snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device, Live 0xf8a6b000 soundcore 15328 1 snd, Live 0xf8a51000 nvidia 6900560 38 - Live 0xf918d000 (P) i2c_core 31892 1 nvidia, Live 0xf89e5000 iTCO_wdt 18596 0 - Live 0xf89da000 iTCO_vendor_support 11652 1 iTCO_wdt, Live 0xf8840000 button 14224 0 - Live 0xf89e0000 intel_agp 33724 1 - Live 0xf8a1e000 shpchp 37908 0 - Live 0xf8a13000 pci_hotplug 35236 1 shpchp, Live 0xf8a09000 agpgart 42184 2 nvidia,intel_agp, Live 0xf89fd000 ext3 133384 1 - Live 0xf8a29000 jbd 55444 1 ext3, Live 0xf89ee000 mbcache 16004 1 ext3, Live 0xf89a8000 sr_mod 22212 0 - Live 0xf89d3000 cdrom 43168 1 sr_mod, Live 0xf89c7000 sd_mod 42264 3 - Live 0xf89bb000 crc_t10dif 9984 1 sd_mod, Live 0xf8876000 sg 39732 0 - Live 0xf89b0000 ata_generic 12932 0 - Live 0xf88fa000 usbhid 35840 0 - Live 0xf8895000 hid 50560 1 usbhid, Live 0xf896e000 ata_piix 24580 2 - Live 0xf889f000 pata_acpi 12160 0 - Live 0xf8891000 ohci1394 37936 0 - Live 0xf8963000 libata 177312 3 ata_generic,ata_piix,pata_acpi, Live 0xf88cd000 ieee1394 96324 2 sbp2,ohci1394, Live 0xf894a000 e1000 132164 0 - Live 0xf8928000 scsi_mod 155212 6 usb_storage,sbp2,sr_mod,sd_mod,sg,libata, Live 0xf8901000 dock 16656 1 libata, Live 0xf887d000 uhci_hcd 30736 0 - Live 0xf8865000 ehci_hcd 43276 0 - Live 0xf8885000 usbcore 148848 7 usb_storage,libusual,usblp,usbhid,uhci_hcd,ehci_hcd, Live 0xf88a7000 thermal 23708 0 - Live 0xf886f000 processor 42156 1 thermal, Live 0xf884a000 fan 12548 0 - Live 0xf8820000 fbcon 47648 0 - Live 0xf8858000 tileblit 10880 1 fbcon, Live 0xf8818000 font 16512 1 fbcon, Live 0xf8844000 bitblit 13824 1 fbcon, Live 0xf8825000 softcursor 9984 1 bitblit, Live 0xf881c000 fuse 60828 3 - Live 0xf882e000 ____________________________________________ /proc/version Linux version 2.6.27-7-generic (buildd@palmer) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:20 UTC 2008 ____________________________________________ /proc/pci does not exist ____________________________________________ /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cddff : Video ROM 000ce000-000d5fff : reserved 000e0000-000effff : Extension ROM 000f0000-000fffff : reserved 000f0000-000fffff : System ROM 00100000-4ffeffff : System RAM 00100000-003832a9 : Kernel code 003832aa-004a567f : Kernel data 00515000-005c0a1f : Kernel bss 4fff0000-4fff7fff : ACPI Tables 4fff8000-4fffffff : ACPI Non-volatile Storage 60000000-600fffff : PCI Bus 0000:02 60000000-6001ffff : 0000:02:0d.0 60100000-601003ff : 0000:00:1f.1 bba00000-dbafffff : PCI Bus 0000:01 c0000000-cfffffff : 0000:01:00.0 dbd00000-dfdfffff : PCI Bus 0000:01 dd000000-ddffffff : 0000:01:00.0 de000000-deffffff : 0000:01:00.0 de000000-deffffff : nvidia dfde0000-dfdfffff : 0000:01:00.0 dfe00000-dfefffff : PCI Bus 0000:02 dfea0000-dfebffff : 0000:02:0d.0 dfea0000-dfebffff : e1000 dfec0000-dfedffff : 0000:02:0d.0 dfec0000-dfedffff : e1000 dfefb800-dfefbfff : 0000:02:09.0 dfefb800-dfefbfff : ohci1394 dfffbc00-dfffbfff : 0000:00:1d.7 dfffbc00-dfffbfff : ehci_hcd e0000000-e3ffffff : 0000:00:00.0 fec00000-fec00fff : reserved fee00000-fee00fff : Local APIC fee00000-fee00fff : reserved fff00000-ffffffff : reserved ____________________________________________ /proc/mtrr reg00: base=0x00000000 ( 0MB), size=1024MB: write-back, count=1 reg01: base=0x40000000 (1024MB), size= 256MB: write-back, count=1 reg02: base=0xe0000000 (3584MB), size= 64MB: write-combining, count=1 ____________________________________________ /etc/issue Ubuntu 8.10 \n \l ____________________________________________ /etc/debian_version lenny/sid ____________________________________________ /var/log/nvidia-installer.log does not exist ____________________________________________ /var/log/XFree86.0.log does not exist ____________________________________________ /var/log/Xorg.0.log X.Org X Server 1.5.2 Release Date: 10 October 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-19-server i686 Ubuntu Current Operating System: Linux goodkind 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686 Build Date: 24 October 2008 08:00:16AM xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 5 21:34:06 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Device0" (**) Option "Xinerama" "0" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x81d9a40 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 4.1 X.Org XInput driver : 2.1 X.Org Server Extension : 1.1 X.Org Font Renderer : 0.6 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0@1:0:0) nVidia Corporation G73 [GeForce 7600 GS] rev 162, Mem @ 0xde000000/0, 0xc0000000/0, 0xdd000000/0, BIOS @ 0x????????/131072 (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "freetype" will be loaded by default. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 177.80 Wed Oct 1 15:06:06 PDT 2008 (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.5.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.6 (II) Loading font FreeType (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) NVIDIA dlloader X Driver 177.80 Wed Oct 1 14:45:01 PDT 2008 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 01@00:00:0 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib/xorg/modules//libwfb.so (II) Module wfb: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "TwinView" "1" (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +1600+0, DFP: nvidia-auto-select +0+0" (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU GeForce 7600 GS (G73) at PCI:1:0:0 (GPU-0) (--) NVIDIA(0): Memory: 262144 kBytes (--) NVIDIA(0): VideoBIOS: 05.73.22.37.01 (II) NVIDIA(0): Detected AGP rate: 4X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on GeForce 7600 GS at PCI:1:0:0: (--) NVIDIA(0): AOP F90GS (CRT-1) (--) NVIDIA(0): Samsung SyncMaster (DFP-0) (--) NVIDIA(0): AOP F90GS (CRT-1): 400.0 MHz maximum pixel clock (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS (**) NVIDIA(0): TwinView enabled (II) NVIDIA(0): Display Devices found referenced in MetaMode: CRT-1, DFP-0 (II) NVIDIA(0): Assigned Display Devices: CRT-1, DFP-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): (II) NVIDIA(0): "CRT:nvidia-auto-select+1600+0,DFP:nvidia-auto-select+0+0" (II) NVIDIA(0): Virtual screen size determined to be 2880 x 1200 (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) NVIDIA(0): Initialized AGP GART. (II) NVIDIA(0): Setting mode (II) NVIDIA(0): "CRT:nvidia-auto-select+1600+0,DFP:nvidia-auto-select+0+0" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (II) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (II) Loading extension XINERAMA (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (II) config/hal: Adding input device Macintosh mouse button emulation (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.5.2, module version = 2.0.99 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Configuring as mouse (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) AT Translated Set 2 keyboard: xkb_rules: "evdev" (**) Option "xkb_model" "pc105" (**) AT Translated Set 2 keyboard: xkb_model: "pc105" (**) Option "xkb_layout" "us" (**) AT Translated Set 2 keyboard: xkb_layout: "us" (II) config/hal: Adding input device Microsoft Microsoft Optical Mouse with Tilt Wheel (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: always reports core events (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: Device: "/dev/input/event2" (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found x and y relative axes (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found 4 mouse buttons (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: Configuring as mouse (II) XINPUT: Adding extended input device "Microsoft Microsoft Optical Mouse with Tilt Wheel" (type: MOUSE) (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: YAxisMapping: buttons 4 and 5 (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 AUDIT: Wed Nov 5 21:34:13 2008: 4989 X: client 4 rejected from local host ( uid=0 gid=0 pid=5217 ) AUDIT: Wed Nov 5 21:34:20 2008: 4989 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5223 ) AUDIT: Wed Nov 5 21:34:20 2008: 4989 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5224 ) AUDIT: Wed Nov 5 21:34:20 2008: 4989 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5225 ) ____________________________________________ /etc/X11/xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Mon Nov 3 08:46:46 UTC 2008 # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # Note that some configuration settings that could be done previously # in this file, now are automatically configured by the server and settings # here are ignored. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "ServerFlags" Option "Xinerama" "0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "AOP F90GS" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 EndSection Section "Device" Identifier "Configured Video Device" Driver "nvidia" Option "NoLogo" "True" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 7600 GS" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" DefaultDepth 24 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "CRT: nvidia-auto-select +1600+0, DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection ____________________________________________ ldd /usr/bin/glxinfo linux-gate.so.1 => (0xb80f5000) libGL.so.1 => /usr/lib/libGL.so.1 (0xb8029000) libm.so.6 => /lib/tls/i686/cmov/libm.so.6 (0xb8003000) libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0xb7ea4000) libX11.so.6 => /usr/lib/libX11.so.6 (0xb7db5000) libGLcore.so.1 => /usr/lib/libGLcore.so.1 (0xb7043000) libnvidia-tls.so.1 => /usr/lib/tls/libnvidia-tls.so.1 (0xb7041000) libXext.so.6 => /usr/lib/libXext.so.6 (0xb7032000) libdl.so.2 => /lib/tls/i686/cmov/libdl.so.2 (0xb702e000) /lib/ld-linux.so.2 (0xb80db000) libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xb702a000) libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb7011000) libXau.so.6 => /usr/lib/libXau.so.6 (0xb700e000) libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb7009000) ____________________________________________ /usr/bin/lspci -d "10de:*" -v -xxx 01:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GS] (rev a2) Subsystem: Giga-byte Technology Device 3428 Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16 Memory at de000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (32-bit, prefetchable) [size=256M] Memory at dd000000 (32-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at dfde0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [44] AGP version 3.0 Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 00: de 10 e1 02 07 00 b0 02 a2 00 00 03 00 f8 00 00 10: 00 00 00 de 08 00 00 c0 00 00 00 dd 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 28 34 30: 00 00 00 00 60 00 00 00 00 00 00 00 03 01 05 01 40: 00 00 00 00 02 00 30 00 17 02 00 1f 04 01 00 1f 50: 00 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00 60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 80 00 00 01 04 40 c1 00 00 00 00 a0: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ____________________________________________ /usr/bin/lspci -t -[0000:00]-+-00.0 +-01.0-[0000:01]----00.0 +-1d.0 +-1d.1 +-1d.2 +-1d.7 +-1e.0-[0000:02]--+-09.0 | +-0a.0 | \-0d.0 +-1f.0 +-1f.1 \-1f.3 ____________________________________________ /usr/sbin/dmidecode # dmidecode 2.9 SMBIOS 2.3 present. 32 structures occupying 1144 bytes. Table at 0x000F0630. Handle 0x0000, DMI type 0, 20 bytes BIOS Information Vendor: American Megatrends Inc. Version: V1.3 04 Release Date: 04/22/2004 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: MICRO-STAR INC. Product Name: MS-6704 Version: 100 Serial Number: 00000000 UUID: Not Present Wake-up Type: Modem Ring Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: MICRO-STAR INC. Product Name: MS-6704 Version: 100 Serial Number: 00000000 Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: Uknown Chassis Manufacture Type: Desktop Lock: Not Present Version: Version 1.00 Serial Number: 123456890 Asset Tag: 0123ABC Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 32 bytes Processor Information Socket Designation: FC-478 Type: Central Processor Family: Pentium 4 Manufacturer: Intel ID: 24 0F 07 3A FF FB EB 3F Signature: Type 0, Family 175, Model 114, Stepping 4 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) Version: Intel(R) Pentium(R) 4 Processor Voltage: 3.3 V 2.9 V External Clock: 133 MHz Max Speed: 4000 MHz Current Speed: 2400 MHz Status: Populated, Enabled Upgrade: Socket 478 L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 8 KB Maximum Size: 1024 KB Supported SRAM Types: Synchronous Installed SRAM Type: Pipeline Burst Synchronous Speed: 40 ns Error Correction Type: Single-bit ECC System Type: Data Associativity: 4-way Set-associative Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 512 KB Maximum Size: 1024 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: 40 ns Error Correction Type: Parity System Type: Unified Associativity: 8-way Set-associative Handle 0x0007, DMI type 5, 22 bytes Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 1024 MB Maximum Total Memory Size: 3072 MB Supported Speeds: Other Supported Memory Types: DIMM SDRAM Memory Module Voltage: 3.3 V Associated Memory Slots: 3 0x0008 0x0009 0x000A Enabled Error Correcting Capabilities: None Handle 0x0008, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM1 Bank Connections: 1 0 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x0009, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM2 Bank Connections: 3 2 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 256 MB (Double-bank Connection) Enabled Size: 256 MB (Double-bank Connection) Error Status: OK Handle 0x000A, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM3 Bank Connections: 2 3 Current Speed: Unknown Type: Unknown Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x000B, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x000C, DMI type 9, 13 bytes System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Available Length: Long ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x000D, DMI type 9, 13 bytes System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: Available Length: Long ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x000E, DMI type 9, 13 bytes System Slot Information Designation: PCI4 Type: 32-bit PCI Current Usage: Available Length: Long ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x000F, DMI type 9, 13 bytes System Slot Information Designation: PCI5 Type: 32-bit PCI Current Usage: Available Length: Long ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0010, DMI type 9, 13 bytes System Slot Information Designation: PCI6 Type: 32-bit PCI Current Usage: Available Length: Long ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0011, DMI type 9, 13 bytes System Slot Information Designation: AGP Type: 32-bit PCI Current Usage: Available Length: Long ID: 4 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0012, DMI type 9, 13 bytes System Slot Information Designation: CNR Type: 32-bit PCI Current Usage: Available Length: Long ID: 5 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0013, DMI type 11, 5 bytes OEM Strings String 1: SMBIOS Support from AMI String 2: Tested by James Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM Port Internal Connector Type: None External Reference Designator: Serial Port A External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: LPT Port Internal Connector Type: None External Reference Designator: Parallel Port External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Mouse Internal Connector Type: None External Reference Designator: PS/2 Mouse External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Floppy Internal Connector Type: On Board Floppy External Reference Designator: Floppy External Connector Type: None Port Type: None Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Primary IDE Internal Connector Type: On Board IDE External Reference Designator: IDE-1 External Connector Type: None Port Type: None Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Secondary IDE Internal Connector Type: On Board IDE External Reference Designator: IDE-2 External Connector Type: None Port Type: None Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB Port Internal Connector Type: None External Reference Designator: USB External Connector Type: Access Bus (USB) Port Type: USB Handle 0x001C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: USB Port Internal Connector Type: None External Reference Designator: USB External Connector Type: Access Bus (USB) Port Type: USB Handle 0x001D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Ethernet Internal Connector Type: RJ-45 External Reference Designator: LAN External Connector Type: Access Bus (USB) Port Type: Network Port Handle 0x001E, DMI type 12, 5 bytes System Configuration Options Option 1: System Management BIOS from Atlanta Option 2: SMBIOS from AMI Handle 0x001F, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 4 English Traditional Chinese Simplified Chinese Japanese Currently Installed Language: English ____________________________________________ /sbin/modinfo nvidia | grep vermagic vermagic: 2.6.27-7-generic SMP mod_unload modversions 586 ____________________________________________ Scanning kernel log files for NVRM messages: /var/log/messages: Nov 5 19:10:03 goodkind kernel: [ 15.849000] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 Nov 5 19:12:55 goodkind kernel: [ 15.136085] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 Nov 5 19:15:25 goodkind kernel: [ 15.095660] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 Nov 5 21:03:02 goodkind kernel: [ 15.014913] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 Nov 5 21:03:17 goodkind kernel: [ 37.712978] NVRM: RmInitAdapter failed! (0x23:0xffffffff:688) Nov 5 21:03:17 goodkind kernel: [ 37.712985] NVRM: rm_init_adapter(0) failed Nov 5 21:03:21 goodkind kernel: [ 40.848788] NVRM: RmInitAdapter failed! (0x23:0xffffffff:688) Nov 5 21:03:21 goodkind kernel: [ 40.848797] NVRM: rm_init_adapter(0) failed Nov 5 21:03:24 goodkind kernel: [ 43.965918] NVRM: RmInitAdapter failed! (0x23:0xffffffff:688) Nov 5 21:03:24 goodkind kernel: [ 43.965926] NVRM: rm_init_adapter(0) failed Nov 5 21:08:41 goodkind kernel: [ 14.879584] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 Nov 5 21:30:17 goodkind kernel: [ 14.996920] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 Nov 5 21:30:33 goodkind kernel: [ 37.738360] NVRM: RmInitAdapter failed! (0x23:0xffffffff:688) Nov 5 21:30:33 goodkind kernel: [ 37.738368] NVRM: rm_init_adapter(0) failed Nov 5 21:30:36 goodkind kernel: [ 40.877005] NVRM: RmInitAdapter failed! (0x23:0xffffffff:688) Nov 5 21:30:36 goodkind kernel: [ 40.877013] NVRM: rm_init_adapter(0) failed Nov 5 21:30:39 goodkind kernel: [ 43.990090] NVRM: RmInitAdapter failed! (0x23:0xffffffff:688) Nov 5 21:30:39 goodkind kernel: [ 43.990098] NVRM: rm_init_adapter(0) failed Nov 5 21:34:01 goodkind kernel: [ 15.135454] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 ____________________________________________ dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-7-generic (buildd@palmer) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:20 UTC 2008 (Ubuntu 2.6.27-7.16-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d6000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004fff0000 (usable) [ 0.000000] BIOS-e820: 000000004fff0000 - 000000004fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000004fff8000 - 0000000050000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x4fff0 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 [ 0.000000] RAMDISK: 37826000 - 37fef9e6 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FA0F0, 0014 (r0 AMI ) [ 0.000000] ACPI: RSDT 4FFF0000, 002C (r1 AMIINT INTEL845 10 MSFT 97) [ 0.000000] ACPI: FACP 4FFF0030, 0081 (r1 AMIINT INTEL845 11 MSFT 97) [ 0.000000] ACPI: DSDT 4FFF0120, 3790 (r1 INTEL BROKDLEG 1000 MSFT 100000D) [ 0.000000] ACPI: FACS 4FFF8000, 0040 [ 0.000000] ACPI: APIC 4FFF00C0, 005C (r1 AMIINT INTEL845 9 MSFT 97) [ 0.000000] 383MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 38000000 [ 0.000000] low ram: 00000000 - 38000000 [ 0.000000] bootmap 00008000 - 0000f000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20] [ 0.000000] #4 [0037826000 - 0037fef9e6] RAMDISK ==> [0037826000 - 0037fef9e6] [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000] [ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00fba20] 000fba20 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00038000 [ 0.000000] HighMem 0x00038000 -> 0x0004fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0004fff0 [ 0.000000] On node 0 totalpages: 327567 [ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000 [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 [ 0.000000] HighMem zone: 97424 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d6000 [ 0.000000] PM: Registered nosave memory: 00000000000d6000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000) [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 324687 [ 0.000000] Kernel command line: root=UUID=0b2592b2-4876-4c46-b1f7-1191c53c0432 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PMTIMER calibration value [ 0.000000] Detected 2418.669 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 1284052k/1310656k available (2572k kernel code, 25308k reserved, 1160k data, 424k init, 393152k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB) [ 0.004000] .data : 0xc03832aa - 0xc04a5680 (1160 kB) [ 0.004000] .text : 0xc0100000 - 0xc03832aa (2572 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 4837.33 BogoMIPS (lpj=9674676) [ 0.004048] Security Framework initialized [ 0.004065] SELinux: Disabled at boot. [ 0.004100] AppArmor: AppArmor initialized [ 0.004116] Mount-cache hash table entries: 512 [ 0.004404] Initializing cgroup subsys ns [ 0.004412] Initializing cgroup subsys cpuacct [ 0.004416] Initializing cgroup subsys memory [ 0.004441] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004446] CPU: L2 cache: 512K [ 0.004450] CPU: Hyper-Threading is disabled [ 0.004471] Checking 'hlt' instruction... OK. [ 0.020637] SMP alternatives: switching to UP code [ 0.028015] ACPI: Core revision 20080609 [ 0.029960] ACPI: Checking initramfs for custom DSDT [ 0.448228] ENABLING IO-APIC IRQs [ 0.448410] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.488366] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04 [ 0.492030] Brought up 1 CPUs [ 0.492030] Total of 1 processors activated (4837.33 BogoMIPS). [ 0.492030] CPU0 attaching sched-domain: [ 0.492030] domain 0: span 0 level CPU [ 0.492030] groups: 0 [ 0.492030] net_namespace: 840 bytes [ 0.492030] Booting paravirtualized kernel on bare hardware [ 0.492030] Time: 21:33:39 Date: 11/05/08 [ 0.492030] NET: Registered protocol family 16 [ 0.492030] EISA bus registered [ 0.492030] ACPI: bus type pci registered [ 0.492030] PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2 [ 0.492030] PCI: Using configuration type 1 for base access [ 0.493112] ACPI: EC: Look up EC in DSDT [ 0.500873] ACPI: Interpreter enabled [ 0.500879] ACPI: (supports S0 S1 S4 S5) [ 0.500899] ACPI: Using IOAPIC for interrupt routing [ 0.508144] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.508256] PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e3ffffff] [ 0.508399] PCI: 0000:00:1d.0 reg 20 io port: [e400, e41f] [ 0.508454] PCI: 0000:00:1d.1 reg 20 io port: [e800, e81f] [ 0.508509] PCI: 0000:00:1d.2 reg 20 io port: [ec00, ec1f] [ 0.508572] PCI: 0000:00:1d.7 reg 10 32bit mmio: [dfffbc00, dfffbfff] [ 0.508627] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.508633] pci 0000:00:1d.7: PME# disabled [ 0.508675] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.508677] * this clock source is slow. If you are sure your timer does not have [ 0.508679] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.508723] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.508731] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.508735] pci 0000:00:1f.0: quirk: region 0400-043f claimed by ICH4 GPIO [ 0.508757] PCI: 0000:00:1f.1 reg 10 io port: [0, 7] [ 0.508765] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] [ 0.508773] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] [ 0.508780] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] [ 0.508788] PCI: 0000:00:1f.1 reg 20 io port: [fc00, fc0f] [ 0.508795] PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff] [ 0.508848] PCI: 0000:00:1f.3 reg 20 io port: [c00, c1f] [ 0.508913] PCI: 0000:01:00.0 reg 10 32bit mmio: [de000000, deffffff] [ 0.508922] PCI: 0000:01:00.0 reg 14 32bit mmio: [c0000000, cfffffff] [ 0.508930] PCI: 0000:01:00.0 reg 18 32bit mmio: [dd000000, ddffffff] [ 0.508951] PCI: 0000:01:00.0 reg 30 32bit mmio: [dfde0000, dfdfffff] [ 0.509004] PCI: bridge 0000:00:01.0 32bit mmio: [dbd00000, dfdfffff] [ 0.509009] PCI: bridge 0000:00:01.0 32bit mmio pref: [bba00000, dbafffff] [ 0.509057] PCI: 0000:02:09.0 reg 10 32bit mmio: [dfefb800, dfefbfff] [ 0.509065] PCI: 0000:02:09.0 reg 14 io port: [dc00, dc7f] [ 0.509105] pci 0000:02:09.0: supports D2 [ 0.509108] pci 0000:02:09.0: PME# supported from D2 D3hot D3cold [ 0.509113] pci 0000:02:09.0: PME# disabled [ 0.509143] PCI: 0000:02:0a.0 reg 10 io port: [d800, d8ff] [ 0.509186] pci 0000:02:0a.0: supports D1 [ 0.509189] pci 0000:02:0a.0: supports D2 [ 0.509237] PCI: 0000:02:0d.0 reg 10 32bit mmio: [dfec0000, dfedffff] [ 0.509246] PCI: 0000:02:0d.0 reg 14 32bit mmio: [dfea0000, dfebffff] [ 0.509253] PCI: 0000:02:0d.0 reg 18 io port: [d400, d43f] [ 0.509275] PCI: 0000:02:0d.0 reg 30 32bit mmio: [dfe80000, dfe9ffff] [ 0.509296] pci 0000:02:0d.0: PME# supported from D0 D3hot D3cold [ 0.509301] pci 0000:02:0d.0: PME# disabled [ 0.509326] pci 0000:00:1e.0: transparent bridge [ 0.509331] PCI: bridge 0000:00:1e.0 io port: [d000, dfff] [ 0.509336] PCI: bridge 0000:00:1e.0 32bit mmio: [dfe00000, dfefffff] [ 0.509352] bus 00 -> node 0 [ 0.509363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.509603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT] [ 0.513042] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 12 14 15) [ 0.513218] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.513392] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.513631] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.513804] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.513978] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.514151] ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled. [ 0.514386] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.514578] ACPI: Power Resource [URP1] (off) [ 0.514642] ACPI: Power Resource [URP2] (off) [ 0.514701] ACPI: Power Resource [FDDP] (off) [ 0.514760] ACPI: Power Resource [LPTP] (off) [ 0.514878] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.514937] pnp: PnP ACPI init [ 0.514950] ACPI: bus type pnp registered [ 0.519246] pnp: PnP ACPI: found 11 devices [ 0.519250] ACPI: ACPI bus type pnp unregistered [ 0.519255] PnPBIOS: Disabled by ACPI PNP [ 0.519849] PCI: Using ACPI for IRQ routing [ 0.520117] NET: Registered protocol family 8 [ 0.520121] NET: Registered protocol family 20 [ 0.520186] NetLabel: Initializing [ 0.520189] NetLabel: domain hash size = 128 [ 0.520191] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.520209] NetLabel: unlabeled traffic allowed by default [ 0.520866] tracer: 772 pages allocated for 65536 entries of 48 bytes [ 0.520869] actual entries 65620 [ 0.521089] AppArmor: AppArmor Filesystem Enabled [ 0.521113] ACPI: RTC can wake from S4 [ 0.521131] system 00:01: ioport range 0x290-0x297 has been reserved [ 0.521131] system 00:01: ioport range 0x3f0-0x3f1 has been reserved [ 0.521131] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.521131] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.556692] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.556696] pci 0000:00:01.0: IO window: disabled [ 0.556703] pci 0000:00:01.0: MEM window: 0xdbd00000-0xdfdfffff [ 0.556709] pci 0000:00:01.0: PREFETCH window: 0x000000bba00000-0x000000dbafffff [ 0.556718] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.556722] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.556729] pci 0000:00:1e.0: MEM window: 0xdfe00000-0xdfefffff [ 0.556735] pci 0000:00:1e.0: PREFETCH window: 0x00000060000000-0x000000600fffff [ 0.556757] pci 0000:00:1e.0: setting latency timer to 64 [ 0.556762] bus: 00 index 0 io port: [0, ffff] [ 0.556765] bus: 00 index 1 mmio: [0, ffffffff] [ 0.556768] bus: 01 index 0 mmio: [0, 0] [ 0.556771] bus: 01 index 1 mmio: [dbd00000, dfdfffff] [ 0.556775] bus: 01 index 2 mmio: [bba00000, dbafffff] [ 0.556777] bus: 01 index 3 mmio: [0, 0] [ 0.556780] bus: 02 index 0 io port: [d000, dfff] [ 0.556784] bus: 02 index 1 mmio: [dfe00000, dfefffff] [ 0.556787] bus: 02 index 2 mmio: [60000000, 600fffff] [ 0.556789] bus: 02 index 3 io port: [0, ffff] [ 0.556792] bus: 02 index 4 mmio: [0, ffffffff] [ 0.556809] NET: Registered protocol family 2 [ 0.557018] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.557490] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.558600] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.559306] TCP: Hash tables configured (established 131072 bind 65536) [ 0.559311] TCP reno registered [ 0.559554] NET: Registered protocol family 1 [ 0.559740] checking if image is initramfs... it is [ 1.060066] Switched to high resolution mode on CPU 0 [ 1.422961] Freeing initrd memory: 7974k freed [ 1.423961] audit: initializing netlink socket (disabled) [ 1.423987] type=2000 audit(1225920819.420:1): initialized [ 1.429789] highmem bounce pool size: 64 pages [ 1.429799] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.433121] VFS: Disk quotas dquot_6.5.1 [ 1.433267] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.433434] msgmni has been set to 1757 [ 1.433626] io scheduler noop registered [ 1.433630] io scheduler anticipatory registered [ 1.433633] io scheduler deadline registered [ 1.433656] io scheduler cfq registered (default) [ 1.433759] pci 0000:01:00.0: Boot video device [ 1.434274] isapnp: Scanning for PnP cards... [ 1.788078] isapnp: No Plug & Play device found [ 1.848720] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.848874] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.850042] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.852743] brd: module loaded [ 1.852855] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.853046] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.853050] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.853534] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.854255] mice: PS/2 mouse device common for all mice [ 1.854487] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.854514] rtc0: alarms up to one month, y3k [ 1.854707] EISA: Probing bus 0 at eisa.0 [ 1.854746] EISA: Detected 0 cards. [ 1.854751] cpuidle: using governor ladder [ 1.854753] cpuidle: using governor menu [ 1.855491] TCP cubic registered [ 1.855532] Using IPI No-Shortcut mode [ 1.855897] registered taskstats version 1 [ 1.856062] Magic number: 0:663:600 [ 1.856123] tty ptyd4: hash matches [ 1.856214] rtc_cmos 00:04: setting system clock to 2008-11-05 21:33:41 UTC (1225920821) [ 1.856219] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.856221] EDD information not available. [ 1.856783] Freeing unused kernel memory: 424k freed [ 1.856848] Write protecting the kernel text: 2576k [ 1.856886] Write protecting the kernel read-only data: 936k [ 1.879310] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 2.098430] fuse init (API version 7.9) [ 2.720360] processor ACPI0007:00: registered as cooling_device0 [ 2.720366] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.485871] usbcore: registered new interface driver usbfs [ 3.485907] usbcore: registered new interface driver hub [ 3.485984] usbcore: registered new device driver usb [ 3.504342] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.504359] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.504364] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.504446] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.508361] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.508369] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 3.508386] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdfffbc00 [ 3.512363] USB Universal Host Controller Interface driver v3.0 [ 3.532568] No dock devices found. [ 3.557729] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.557975] usb usb1: configuration #1 chosen from 1 choice [ 3.558020] hub 1-0:1.0: USB hub found [ 3.558035] hub 1-0:1.0: 6 ports detected [ 3.586600] SCSI subsystem initialized [ 3.586723] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI [ 3.586727] Copyright (c) 1999-2006 Intel Corporation. [ 3.689085] libata version 3.00 loaded. [ 3.764507] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.764521] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.764526] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.764564] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.764601] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e400 [ 3.764740] usb usb2: configuration #1 chosen from 1 choice [ 3.764779] hub 2-0:1.0: USB hub found [ 3.764792] hub 2-0:1.0: 2 ports detected [ 3.972390] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.972403] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.972408] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.972445] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.972481] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 [ 3.972620] usb usb3: configuration #1 chosen from 1 choice [ 3.972664] hub 3-0:1.0: USB hub found [ 3.972678] hub 3-0:1.0: 2 ports detected [ 4.076842] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.076855] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4.076859] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.076912] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 4.076949] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00 [ 4.077150] usb usb4: configuration #1 chosen from 1 choice [ 4.077190] hub 4-0:1.0: USB hub found [ 4.077202] hub 4-0:1.0: 2 ports detected [ 4.084087] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 4.180519] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.180573] pata_acpi 0000:00:1f.1: setting latency timer to 64 [ 4.180592] pata_acpi 0000:00:1f.1: PCI INT A disabled [ 4.180643] e1000 0000:02:0d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.433816] e1000: 0000:02:0d.0: e1000_probe: (PCI:33MHz:32-bit) 00:10:dc:d6:ed:19 [ 4.469338] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 4.469384] ohci1394 0000:02:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.522168] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[dfefb800-dfefbfff] Max Packet=[2048] IR/IT contexts=[8/8] [ 4.540060] usb 2-1: configuration #1 chosen from 1 choice [ 4.540321] ata_piix 0000:00:1f.1: version 2.12 [ 4.540338] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.540405] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 4.540909] scsi0 : ata_piix [ 4.542355] scsi1 : ata_piix [ 4.545033] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 4.545037] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 4.717668] ata1.00: ATA-6: WDC WD1600JB-00GVC0, 08.02D08, max UDMA/100 [ 4.717674] ata1.00: 312581808 sectors, multi 16: LBA48 [ 4.718614] ata1.01: ATA-5: WDC WD800JB-00CRA1, 17.07W17, max UDMA/100 [ 4.718619] ata1.01: 156301488 sectors, multi 16: LBA [ 4.733639] ata1.00: configured for UDMA/100 [ 4.749208] ata1.01: configured for UDMA/100 [ 4.784078] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 4.964659] usb 2-2: configuration #1 chosen from 1 choice [ 4.967865] usbcore: registered new interface driver hiddev [ 4.999314] input: Microsoft Microsoft Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2 [ 4.999850] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Optical Mouse with Tilt Wheel] on usb-0000:00:1d.0-1 [ 4.999883] usbcore: registered new interface driver usbhid [ 4.999889] usbhid: v2.6:USB HID core driver [ 5.032315] ata2.01: ATAPI: LITE-ON DVDRW SOHW-1633S, BS0C, max UDMA/66 [ 5.032334] ata2.01: limited to UDMA/33 due to 40-wire cable [ 5.048247] ata2.01: configured for UDMA/33 [ 5.048404] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5 [ 5.049183] scsi 0:0:1:0: Direct-Access ATA WDC WD800JB-00CR 17.0 PQ: 0 ANSI: 5 [ 5.050193] scsi 1:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1633S BS0C PQ: 0 ANSI: 5 [ 5.072167] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.072227] scsi 0:0:1:0: Attached scsi generic sg1 type 0 [ 5.072282] scsi 1:0:1:0: Attached scsi generic sg2 type 5 [ 5.109083] Driver 'sd' needs updating - please use bus_type methods [ 5.112563] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.112593] sd 0:0:0:0: [sda] Write Protect is off [ 5.112597] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.112644] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.112769] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 5.112795] sd 0:0:0:0: [sda] Write Protect is off [ 5.112798] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.112843] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.112849] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 5.126326] sda1 sda2 < sda5 > [ 5.159028] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.160363] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 5.160395] sd 0:0:1:0: [sdb] Write Protect is off [ 5.160399] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.160452] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.160565] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 5.160594] sd 0:0:1:0: [sdb] Write Protect is off [ 5.160597] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.160648] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.160654] sdb: sdb1 sdb2 sdb3 < sdb5 > [ 5.201420] sd 0:0:1:0: [sdb] Attached SCSI disk [ 5.212074] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 5.212081] Uniform CD-ROM driver Revision: 3.20 [ 5.212234] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 5.724718] PM: Starting manual resume from disk [ 5.724724] PM: Resume from partition 8:5 [ 5.724726] PM: Checking hibernation image. [ 5.724928] PM: Resume from disk failed. [ 5.797760] kjournald starting. Commit interval 5 seconds [ 5.797782] EXT3-fs: mounted filesystem with ordered data mode. [ 5.805447] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc00083324] [ 10.880639] udevd version 124 started [ 11.725092] Linux agpgart interface v0.103 [ 11.800650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 11.866372] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.874615] agpgart-intel 0000:00:00.0: Intel 830M Chipset [ 11.877799] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 12.027003] intel_rng: FWH not detected [ 12.238271] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 12.251479] ACPI: Power Button (FF) [PWRF] [ 12.251688] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 12.264030] ACPI: Power Button (CM) [PWRB] [ 12.289725] iTCO_vendor_support: vendor-support=0 [ 12.323790] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 12.325175] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860) [ 12.325367] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.090603] nvidia: module license 'NVIDIA' taints kernel. [ 13.700849] parport_pc 00:0a: reported by Plug and Play ACPI [ 13.700894] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 14.252308] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 [ 14.252342] usbcore: registered new interface driver usblp [ 14.993906] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 15.033166] C-Media PCI 0000:02:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 15.135031] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.135454] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 [ 18.135393] lp0: using parport0 (interrupt-driven). [ 18.393221] Adding 3783268k swap on /dev/sda5. Priority:-1 extents:1 across:3783268k [ 18.976229] EXT3 FS on sda1, internal journal [ 20.062704] type=1505 audit(1225946039.320:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3949 [ 20.286196] type=1505 audit(1225946039.544:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3954 [ 20.286579] type=1505 audit(1225946039.544:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3954 [ 20.466245] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.215250] ACPI: WMI: Mapper loaded [ 22.463604] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 22.550158] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 22.550167] apm: overridden by ACPI. [ 22.728176] ppdev: user-space parallel port driver [ 25.076187] Bluetooth: Core ver 2.13 [ 25.078902] NET: Registered protocol family 31 [ 25.078911] Bluetooth: HCI device and connection manager initialized [ 25.078916] Bluetooth: HCI socket layer initialized [ 25.212166] Bluetooth: L2CAP ver 2.11 [ 25.212180] Bluetooth: L2CAP socket layer initialized [ 25.252562] Bluetooth: SCO (Voice Link) ver 0.6 [ 25.252569] Bluetooth: SCO socket layer initialized [ 25.277503] Bluetooth: RFCOMM socket layer initialized [ 25.278701] Bluetooth: RFCOMM TTY layer initialized [ 25.278709] Bluetooth: RFCOMM ver 1.10 [ 25.288265] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.288274] Bluetooth: BNEP filters: protocol multicast [ 25.383111] Bridge firewalling registered [ 25.385215] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 28.406801] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 28.406822] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 28.406858] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode [ 29.856387] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 29.980576] NET: Registered protocol family 17 [ 117.118897] NET: Registered protocol family 10 [ 117.121574] lo: Disabled Privacy Extensions [ 127.180024] eth0: no IPv6 routers present [ 131.984362] ppdev0: registered pardevice [ 132.032250] ppdev0: unregistered pardevice [ 132.091365] type=1503 audit(1225946151.348:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5634/net/" pid=5634 profile="/usr/sbin/cupsd" [ 133.129558] type=1503 audit(1225946152.388:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5638/net/" pid=5638 profile="/usr/sbin/cupsd" [ 133.130268] type=1503 audit(1225946152.388:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5638 profile="/usr/sbin/cupsd" [ 133.132928] type=1503 audit(1225946152.392:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5638 profile="/usr/sbin/cupsd" [ 133.135562] type=1503 audit(1225946152.392:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5638 profile="/usr/sbin/cupsd" [ 133.138084] type=1503 audit(1225946152.396:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5638 profile="/usr/sbin/cupsd" [ 133.139514] type=1503 audit(1225946152.396:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5638 profile="/usr/sbin/cupsd" [ 133.142313] type=1503 audit(1225946152.400:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5638 profile="/usr/sbin/cupsd" [ 133.145296] type=1503 audit(1225946152.404:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5638 profile="/usr/sbin/cupsd" [ 133.147865] type=1503 audit(1225946152.404:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=5638 profile="/usr/sbin/cupsd" [ 134.298072] ppdev0: registered pardevice [ 134.348057] ppdev0: unregistered pardevice [ 134.508350] ppdev0: registered pardevice [ 134.566425] ppdev0: unregistered pardevice [ 1401.904023] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 1402.071374] usb 1-6: configuration #1 chosen from 1 choice [ 1402.222238] usbcore: registered new interface driver libusual [ 1402.304168] Initializing USB Mass Storage driver... [ 1402.309338] scsi2 : SCSI emulation for USB Mass Storage devices [ 1402.310644] usbcore: registered new interface driver usb-storage [ 1402.310999] USB Mass Storage support registered. [ 1402.311415] usb-storage: device found at 4 [ 1402.311423] usb-storage: waiting for device to settle before scanning [ 1407.308446] usb-storage: device scan complete [ 1407.309795] scsi 2:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS [ 1407.321271] sd 2:0:0:0: [sdc] 3964928 512-byte hardware sectors (2030 MB) [ 1407.322397] sd 2:0:0:0: [sdc] Write Protect is off [ 1407.322406] sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 1407.322412] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 1407.325270] sd 2:0:0:0: [sdc] 3964928 512-byte hardware sectors (2030 MB) [ 1407.326520] sd 2:0:0:0: [sdc] Write Protect is off [ 1407.326528] sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 1407.326531] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 1407.327139] sdc: sdc1 [ 1407.328472] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 1407.329183] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 1422.184324] usb 1-6: USB disconnect, address 4 [ 2656.504018] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 2656.670745] usb 1-6: configuration #1 chosen from 1 choice [ 2656.686457] scsi3 : SCSI emulation for USB Mass Storage devices [ 2656.690540] usb-storage: device found at 5 [ 2656.690550] usb-storage: waiting for device to settle before scanning [ 2661.688525] usb-storage: device scan complete [ 2661.690190] scsi 3:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS [ 2661.697741] sd 3:0:0:0: [sdc] 3964928 512-byte hardware sectors (2030 MB) [ 2661.698981] sd 3:0:0:0: [sdc] Write Protect is off [ 2661.698989] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 2661.698993] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 2661.701979] sd 3:0:0:0: [sdc] 3964928 512-byte hardware sectors (2030 MB) [ 2661.703105] sd 3:0:0:0: [sdc] Write Protect is off [ 2661.703113] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 2661.703117] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 2661.703732] sdc: sdc1 [ 2661.704707] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 2661.705182] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 2680.278908] usb 1-6: USB disconnect, address 5 ____________________________________________ Using built-in specs. Target: i486-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.3.2-1ubuntu11' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.3 --program-suffix=-4.3 --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --enable-mpfr --enable-targets=all --enable-checking=release --build=i486-linux-gnu --host=i486-linux-gnu --target=i486-linux-gnu Thread model: posix gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ____________________________________________ Using built-in specs. Target: i486-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.3.2-1ubuntu11' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.3 --program-suffix=-4.3 --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --enable-mpfr --enable-targets=all --enable-checking=release --build=i486-linux-gnu --host=i486-linux-gnu --target=i486-linux-gnu Thread model: posix gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ____________________________________________ xset -q: Keyboard Control: auto repeat: on key click percent: 0 LED mask: 00000002 auto repeat delay: 500 repeat rate: 30 auto repeating keys: 00ffffffdffffbbf fadfffdfffdfe5ef ffffffffffffffff ffffffffffffffff bell percent: 50 bell pitch: 400 bell duration: 100 Pointer Control: acceleration: 2/1 threshold: 4 Screen Saver: prefer blanking: yes allow exposures: yes timeout: 0 cycle: 0 Colors: default colormap: 0x20 BlackPixel: 0 WhitePixel: 16777215 Font Path: /home/localuser/.gnome2/share/cursor-fonts,/usr/share/fonts/X11/misc,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,/home/localuser/.gnome2/share/fonts Bug Mode: compatibility mode is disabled DPMS (Energy Star): Standby: 0 Suspend: 0 Off: 0 DPMS is Enabled Monitor is On File paths: Config file: /etc/X11/xorg.conf Modules path: /usr/lib/xorg/modules Log file: /var/log/Xorg.0.log ____________________________________________ nvidia-settings -q all: Attributes for goodkind:0.0: Attribute 'DigitalVibrance' (goodkind:0.0; display device: CRT-1): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU. Attribute 'DigitalVibrance' (goodkind:0.0; display device: DFP-0): 0. The valid values for 'DigitalVibrance' are in the range 0 - 63 (inclusive). 'DigitalVibrance' is display device specific. 'DigitalVibrance' can use the following target types: X Screen, GPU. Attribute 'ImageSharpening' (goodkind:0.0; display device: CRT-1): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU. Attribute 'ImageSharpening' (goodkind:0.0; display device: DFP-0): 0. The valid values for 'ImageSharpening' are in the range 0 - 31 (inclusive). 'ImageSharpening' is display device specific. 'ImageSharpening' can use the following target types: X Screen, GPU. Attribute 'BusType' (goodkind:0.0): 0. The valid values for 'BusType' are in the range 0 - 3 (inclusive). 'BusType' is a read-only attribute. 'BusType' can use the following target types: X Screen, GPU. Attribute 'BusRate' (goodkind:0.0): 4. The valid values for 'BusRate' are in the range 1 - 8 (inclusive). 'BusRate' is a read-only attribute. 'BusRate' can use the following target types: X Screen, GPU. Attribute 'VideoRam' (goodkind:0.0): 262144. 'VideoRam' is an integer attribute. 'VideoRam' is a read-only attribute. 'VideoRam' can use the following target types: X Screen, GPU. Attribute 'Irq' (goodkind:0.0): 16. 'Irq' is an integer attribute. 'Irq' is a read-only attribute. 'Irq' can use the following target types: X Screen, GPU. Attribute 'OperatingSystem' (goodkind:0.0): 0. The valid values for 'OperatingSystem' are in the range 0 - 2 (inclusive). 'OperatingSystem' is a read-only attribute. 'OperatingSystem' can use the following target types: X Screen, GPU. Attribute 'SyncToVBlank' (goodkind:0.0): 0. 'SyncToVBlank' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'SyncToVBlank' can use the following target types: X Screen. Attribute 'AllowFlipping' (goodkind:0.0): 1. 'AllowFlipping' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'AllowFlipping' can use the following target types: X Screen. Attribute 'LogAniso' (goodkind:0.0): 0. The valid values for 'LogAniso' are in the range 0 - 4 (inclusive). 'LogAniso' can use the following target types: X Screen. Attribute 'FSAA' (goodkind:0.0): 0. Valid values for 'FSAA' are: 0, 1, 2, 5, 6, 7, 8 and 9. 'FSAA' can use the following target types: X Screen. Attribute 'TextureSharpen' (goodkind:0.0): 0. 'TextureSharpen' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'TextureSharpen' can use the following target types: X Screen. Attribute 'TwinView' (goodkind:0.0): 1. 'TwinView' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'TwinView' is a read-only attribute. 'TwinView' can use the following target types: X Screen. Attribute 'ConnectedDisplays' (goodkind:0.0): 0x00010002. 'ConnectedDisplays' is a bitmask attribute. 'ConnectedDisplays' is a read-only attribute. 'ConnectedDisplays' can use the following target types: X Screen, GPU. Attribute 'EnabledDisplays' (goodkind:0.0): 0x00010002. 'EnabledDisplays' is a bitmask attribute. 'EnabledDisplays' is a read-only attribute. 'EnabledDisplays' can use the following target types: X Screen, GPU. Attribute 'AssociatedDisplays' (goodkind:0.0): 0x00010002. 'AssociatedDisplays' is a bitmask attribute. 'AssociatedDisplays' can use the following target types: X Screen. Attribute 'Depth30Allowed' (goodkind:0.0): 0. 'Depth30Allowed' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'Depth30Allowed' is a read-only attribute. 'Depth30Allowed' can use the following target types: X Screen, GPU. Attribute 'NoScanout' (goodkind:0.0): 0. 'NoScanout' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'NoScanout' is a read-only attribute. 'NoScanout' can use the following target types: X Screen, GPU. Attribute 'CursorShadow' (goodkind:0.0): 0. 'CursorShadow' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'CursorShadow' can use the following target types: X Screen. Attribute 'CursorShadowXOffset' (goodkind:0.0): 4. The valid values for 'CursorShadowXOffset' are in the range 0 - 32 (inclusive). 'CursorShadowXOffset' can use the following target types: X Screen. Attribute 'CursorShadowYOffset' (goodkind:0.0): 2. The valid values for 'CursorShadowYOffset' are in the range 0 - 32 (inclusive). 'CursorShadowYOffset' can use the following target types: X Screen. Attribute 'CursorShadowAlpha' (goodkind:0.0): 64. The valid values for 'CursorShadowAlpha' are in the range 0 - 254 (inclusive). 'CursorShadowAlpha' can use the following target types: X Screen. Attribute 'CursorShadowRed' (goodkind:0.0): 0. The valid values for 'CursorShadowRed' are in the range 0 - 255 (inclusive). 'CursorShadowRed' can use the following target types: X Screen. Attribute 'CursorShadowGreen' (goodkind:0.0): 0. The valid values for 'CursorShadowGreen' are in the range 0 - 255 (inclusive). 'CursorShadowGreen' can use the following target types: X Screen. Attribute 'CursorShadowBlue' (goodkind:0.0): 0. The valid values for 'CursorShadowBlue' are in the range 0 - 255 (inclusive). 'CursorShadowBlue' can use the following target types: X Screen. Attribute 'FSAAAppControlled' (goodkind:0.0): 1. 'FSAAAppControlled' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'FSAAAppControlled' can use the following target types: X Screen. Attribute 'LogAnisoAppControlled' (goodkind:0.0): 1. 'LogAnisoAppControlled' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'LogAnisoAppControlled' can use the following target types: X Screen. Attribute 'RefreshRate' (goodkind:0.0; display device: CRT-1): 60.02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU. Attribute 'RefreshRate' (goodkind:0.0; display device: DFP-0): 60.00 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific. 'RefreshRate' can use the following target types: X Screen, GPU. Attribute 'RefreshRate3' (goodkind:0.0; display device: CRT-1): 60.020 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU. Attribute 'RefreshRate3' (goodkind:0.0; display device: DFP-0): 60.000 Hz. 'RefreshRate3' is an integer attribute. 'RefreshRate3' is a read-only attribute. 'RefreshRate3' is display device specific. 'RefreshRate3' can use the following target types: X Screen, GPU. Attribute 'InitialPixmapPlacement' (goodkind:0.0): 1. The valid values for 'InitialPixmapPlacement' are in the range 0 - 4 (inclusive). 'InitialPixmapPlacement' can use the following target types: X Screen. Attribute 'GlyphCache' (goodkind:0.0): 0. The valid values for 'GlyphCache' are in the range 0 - 1 (inclusive). 'GlyphCache' can use the following target types: X Screen. Attribute 'DynamicTwinview' (goodkind:0.0): 1. 'DynamicTwinview' is an integer attribute. 'DynamicTwinview' is a read-only attribute. 'DynamicTwinview' can use the following target types: X Screen. Attribute 'MultiGpuDisplayOwner' (goodkind:0.0): 0. 'MultiGpuDisplayOwner' is an integer attribute. 'MultiGpuDisplayOwner' is a read-only attribute. 'MultiGpuDisplayOwner' can use the following target types: X Screen. Attribute 'GPUErrors' (goodkind:0.0): 0. 'GPUErrors' is an integer attribute. 'GPUErrors' is a read-only attribute. 'GPUErrors' can use the following target types: X Screen. Attribute 'GvoSupported' (goodkind:0.0): 0. 'GvoSupported' is a boolean attribute; valid values are: 1 (on/true) and 0 (off/false). 'GvoSupported' is a read-only attribute. 'GvoSupported' can use the following target types: X Screen. Attribute 'GPUCoreTemp' (goodkind:0.0): 56. 'GPUCoreTemp' is an integer attribute. 'GPUCoreTemp' is a read-only attribute. 'GPUCoreTemp' can use the following target types: X Screen, GPU. Attribute 'OpenGLImageSettings' (goodkind:0.0): 1. The valid values for 'OpenGLImageSettings' are in the range 0 - 3 (inclusive). 'OpenGLImageSettings' can use the following target types: X Screen. Attribute 'XVideoTextureSyncToVBlank' (goodkind:0.0): 1. The valid values for 'XVideoTextureSyncToVBlank' are in the range 0 - 1 (inclusive). 'XVideoTextureSyncToVBlank' can use the following target types: X Screen. Attribute 'XVideoBlitterSyncToVBlank' (goodkind:0.0): 0. The valid values for 'XVideoBlitterSyncToVBlank' are in the range 0 - 1 (inclusive). 'XVideoBlitterSyncToVBlank' can use the following target types: X Screen. Attribute 'XVideoSyncToDisplay' (goodkind:0.0): 0x00000002. 'XVideoSyncToDisplay' is a bitmask attribute. 'XVideoSyncToDisplay' can use the following target types: X Screen. Attribute 'GPUDefault2DClockFreqs' (goodkind:0.0): 400,400. 'GPUDefault2DClockFreqs' is a packed integer attribute. 'GPUDefault2DClockFreqs' is a read-only attribute. 'GPUDefault2DClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPUDefault3DClockFreqs' (goodkind:0.0): 400,400. 'GPUDefault3DClockFreqs' is a packed integer attribute. 'GPUDefault3DClockFreqs' is a read-only attribute. 'GPUDefault3DClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPU2DClockFreqs' (goodkind:0.0): 400,400. The valid values for 'GPU2DClockFreqs' are in the ranges 100 - 800, 100 - 800 (inclusive). 'GPU2DClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPU3DClockFreqs' (goodkind:0.0): 400,400. The valid values for 'GPU3DClockFreqs' are in the ranges 100 - 800, 100 - 800 (inclusive). 'GPU3DClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPUCurrentClockFreqs' (goodkind:0.0): 400,400. 'GPUCurrentClockFreqs' is a packed integer attribute. 'GPUCurrentClockFreqs' is a read-only attribute. 'GPUCurrentClockFreqs' can use the following target types: X Screen, GPU. Attribute 'GPUPerfModes' (goodkind:0.0): perf=0, nvclock=400, memclock=400 Attribute 'NvidiaDriverVersion' (goodkind:0.0): 177.80 Attribute 'NvControlVersion' (goodkind:0.0): 1.17 Attribute 'GLXServerVersion' (goodkind:0.0): 1.4 Attribute 'GLXClientVersion' (goodkind:0.0): 1.4 Attribute 'OpenGLVersion' (goodkind:0.0): 2.1.2 NVIDIA 177.80 Attribute 'XRandRVersion' (goodkind:0.0): 1.2 Attribute 'XF86VidModeVersion' (goodkind:0.0): 2.2 Attribute 'XvVersion' (goodkind:0.0): 2.2 Attribute 'GPUCurrentPerfMode' (goodkind:0.0): 1. 'GPUCurrentPerfMode' is an integer attribute. 'GPUCurrentPerfMode' is a read-only attribute. 'GPUCurrentPerfMode' can use the following target types: X Screen, GPU. Attribute 'GPUCurrentPerfLevel' (goodkind:0.0): 0. 'GPUCurrentPerfLevel' is an integer attribute. 'GPUCurrentPerfLevel' is a read-only attribute. 'GPUCurrentPerfLevel' can use the following target types: X Screen, GPU. Attribute 'GPUAdaptiveClockState' (goodkind:0.0): 1. 'GPUAdaptiveClockState' is an integer attribute. 'GPUAdaptiveClockState' is a read-only attribute. 'GPUAdaptiveClockState' can use the following target types: X Screen, GPU. Attribute 'GPUPowerSource' (goodkind:0.0): 0. 'GPUPowerSource' is an integer attribute. 'GPUPowerSource' is a read-only attribute. 'GPUPowerSource' can use the following target types: X Screen, GPU. ____________________________________________ /proc/asound/cards 0 [CMI8738 ]: CMI8738-MC6 - C-Media CMI8738 C-Media CMI8738 (model 55) at 0xd800, irq 21 ____________________________________________ /proc/asound/pcm 00-02: CMI8738-MC6 : C-Media PCI IEC958 : playback 1 : capture 1 00-01: CMI8738-MC6 : C-Media PCI 2nd DAC : playback 1 00-00: CMI8738-MC6 : C-Media PCI DAC/ADC : playback 1 : capture 1 ____________________________________________ /proc/asound/modules 0 snd_cmipci ____________________________________________ /proc/asound/devices 2: : timer 3: : sequencer 4: [ 0- 0]: raw midi 5: [ 0- 2]: digital audio playback 6: [ 0- 2]: digital audio capture 7: [ 0- 1]: digital audio playback 8: [ 0- 0]: digital audio playback 9: [ 0- 0]: digital audio capture 10: [ 0- 0]: hardware dependent 11: [ 0] : control ____________________________________________ /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.17. ____________________________________________ /proc/asound/timers G0: system timer : 4000.000us (10000000 ticks) P0-0-0: PCM playback 0-0-0 : SLAVE P0-0-1: PCM capture 0-0-1 : SLAVE P0-1-0: PCM playback 0-1-0 : SLAVE P0-2-0: PCM playback 0-2-0 : SLAVE P0-2-1: PCM capture 0-2-1 : SLAVE ____________________________________________ /proc/asound/hwdep 00-00: OPL3 FM ____________________________________________ End of NVIDIA bug report log file.