[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-31-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #61-Ubuntu SMP Fri Apr 8 18:24:35 UTC 2011 (Ubuntu 2.6.32-31.61-generic 2.6.32.32+drm33.14) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] modified: 00000000bffb0000 - 00000000bffbe000 (ACPI data) [ 0.000000] modified: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS) [ 0.000000] modified: 00000000bfff0000 - 00000000bfffe000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37817000 - 37fef42b [ 0.000000] Allocated new RAMDISK: 008e6000 - 010be42b [ 0.000000] Move RAMDISK from 0000000037817000 - 0000000037fef42a to 008e6000 - 010be42a [ 0.000000] ACPI: RSDP 000f9290 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT bffb0100 00054 (v01 112508 XSDT1701 20081125 MSFT 00000097) [ 0.000000] ACPI: FACP bffb0290 000F4 (v04 112508 FACP1701 20081125 MSFT 00000097) [ 0.000000] ACPI: DSDT bffb0440 057BF (v02 G31GM G31GMB25 00000B25 INTL 20051117) [ 0.000000] ACPI: FACS bffbe000 00040 [ 0.000000] ACPI: APIC bffb0390 0006C (v02 112508 APIC1701 20081125 MSFT 00000097) [ 0.000000] ACPI: MCFG bffb0400 0003C (v01 112508 OEMMCFG 20081125 MSFT 00000097) [ 0.000000] ACPI: OEMB bffbe040 00071 (v01 112508 OEMB1701 20081125 MSFT 00000097) [ 0.000000] ACPI: HPET bffb5c00 00038 (v01 112508 OEMHPET 20081125 MSFT 00000097) [ 0.000000] ACPI: GSCI bffbe0c0 02024 (v01 112508 GMCHSCI 20081125 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2183MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e1ed8] TEXT DATA BSS ==> [0000100000 - 00008e1ed8] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [00008e2000 - 00008e50dd] BRK ==> [00008e2000 - 00008e50dd] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e6000 - 00010be42b] NEW RAMDISK ==> [00008e6000 - 00010be42b] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bffb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffb0 [ 0.000000] On node 0 totalpages: 786239 [ 0.000000] free_area_init_node: node 0, pgdat c079c940, node_mem_map c10c0200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4368 pages used for memmap [ 0.000000] HighMem zone: 554658 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bfffe000 (gap: bfffe000:3ee02000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u1048576 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780095 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-31-generic root=UUID=0c270768-1c43-4b3d-9328-b90784b47afc ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15726720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bffb0) [ 0.000000] Memory: 3086712k/3145408k available (4689k kernel code, 57168k reserved, 2121k data, 664k init, 2236104k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a7000 - 0xc084d000 ( 664 kB) [ 0.000000] .data : 0xc05947c7 - 0xc07a6f08 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc05947c7 (4689 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2212.782 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4425.56 BogoMIPS (lpj=8851128) [ 0.004020] Security Framework initialized [ 0.004038] AppArmor: AppArmor initialized [ 0.004044] Mount-cache hash table entries: 512 [ 0.004162] Initializing cgroup subsys ns [ 0.004166] Initializing cgroup subsys cpuacct [ 0.004170] Initializing cgroup subsys memory [ 0.004177] Initializing cgroup subsys devices [ 0.004179] Initializing cgroup subsys freezer [ 0.004181] Initializing cgroup subsys net_cls [ 0.004200] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004203] CPU: L2 cache: 1024K [ 0.004205] CPU: Physical Processor ID: 0 [ 0.004207] CPU: Processor Core ID: 0 [ 0.004210] mce: CPU supports 6 MCE banks [ 0.004218] CPU0: Thermal monitoring enabled (TM2) [ 0.004221] using mwait in idle threads. [ 0.004227] Performance Events: Core2 events, Intel PMU driver. [ 0.004235] ... version: 2 [ 0.004236] ... bit width: 40 [ 0.004238] ... generic registers: 2 [ 0.004240] ... value mask: 000000ffffffffff [ 0.004242] ... max period: 000000007fffffff [ 0.004243] ... fixed-purpose events: 3 [ 0.004245] ... event mask: 0000000700000003 [ 0.004249] Checking 'hlt' instruction... OK. [ 0.022537] ACPI: Core revision 20090903 [ 0.029968] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.029973] ftrace: allocating 21804 entries in 43 pages [ 0.032057] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.032363] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.075132] CPU0: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 1024K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.160104] CPU1: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d [ 0.160111] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164018] Brought up 2 CPUs [ 0.164021] Total of 2 processors activated (8851.40 BogoMIPS). [ 0.164370] CPU0 attaching sched-domain: [ 0.164374] domain 0: span 0-1 level MC [ 0.164376] groups: 0 1 [ 0.164382] CPU1 attaching sched-domain: [ 0.164384] domain 0: span 0-1 level MC [ 0.164386] groups: 1 0 [ 0.164447] devtmpfs: initialized [ 0.164447] regulator: core version 0.5 [ 0.164447] Time: 12:40:10 Date: 04/21/11 [ 0.164447] NET: Registered protocol family 16 [ 0.164447] Trying to unpack rootfs image as initramfs... [ 0.164447] EISA bus registered [ 0.164447] ACPI: bus type pci registered [ 0.164447] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.164447] PCI: Not using MMCONFIG. [ 0.164447] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 0.164447] PCI: Using configuration type 1 for base access [ 0.172128] bio: create slab at 0 [ 0.172991] ACPI: EC: Look up EC in DSDT [ 0.176808] ACPI: Executed 1 blocks of module-level executable AML code [ 0.181174] ACPI: Interpreter enabled [ 0.181181] ACPI: (supports S0 S1 S4 S5) [ 0.181202] ACPI: Using IOAPIC for interrupt routing [ 0.181254] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.186429] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.186432] PCI: Using MMCONFIG for extended config space [ 0.194553] ACPI Warning: Incorrect checksum in table [OEMB] - 18, should be 13 (20090903/tbutils-314) [ 0.195365] ACPI: No dock devices found. [ 0.195654] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.195772] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.195775] pci 0000:00:01.0: PME# disabled [ 0.195838] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ffc000-0xf9ffffff] [ 0.195883] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.195886] pci 0000:00:1b.0: PME# disabled [ 0.195949] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.195953] pci 0000:00:1c.0: PME# disabled [ 0.196035] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.196039] pci 0000:00:1c.1: PME# disabled [ 0.196088] pci 0000:00:1d.0: reg 20 io port: [0xbc00-0xbc1f] [ 0.196136] pci 0000:00:1d.1: reg 20 io port: [0xb880-0xb89f] [ 0.196186] pci 0000:00:1d.2: reg 20 io port: [0xb800-0xb81f] [ 0.196240] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9ffbc00-0xf9ffbfff] [ 0.196290] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.196294] pci 0000:00:1d.7: PME# disabled [ 0.196422] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.196426] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.196430] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.196473] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.196479] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.196486] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] [ 0.196492] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] [ 0.196498] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.196538] pci 0000:00:1f.2: reg 10 io port: [0xb480-0xb487] [ 0.196544] pci 0000:00:1f.2: reg 14 io port: [0xb400-0xb403] [ 0.196550] pci 0000:00:1f.2: reg 18 io port: [0xb080-0xb087] [ 0.196556] pci 0000:00:1f.2: reg 1c io port: [0xb000-0xb003] [ 0.196562] pci 0000:00:1f.2: reg 20 io port: [0xac00-0xac0f] [ 0.196587] pci 0000:00:1f.2: PME# supported from D3hot [ 0.196590] pci 0000:00:1f.2: PME# disabled [ 0.196636] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.196690] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.196699] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.196709] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.196715] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f] [ 0.196721] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe9e0000-0xfe9fffff] [ 0.196784] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.196788] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe9fffff] [ 0.196793] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.196887] pci 0000:03:00.0: reg 10 io port: [0xd800-0xd8ff] [ 0.196907] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xf8fff000-0xf8ffffff] [ 0.196922] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xf8fe0000-0xf8feffff] [ 0.196931] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff] [ 0.196971] pci 0000:03:00.0: supports D1 D2 [ 0.196973] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196978] pci 0000:03:00.0: PME# disabled [ 0.197036] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff] [ 0.197040] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.197046] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff] [ 0.197084] pci 0000:04:01.0: reg 10 io port: [0xe800-0xe8ff] [ 0.197091] pci 0000:04:01.0: reg 14 32bit mmio: [0xfebffc00-0xfebfffff] [ 0.197117] pci 0000:04:01.0: reg 30 32bit mmio pref: [0xfebc0000-0xfebdffff] [ 0.197136] pci 0000:04:01.0: supports D1 D2 [ 0.197138] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.197143] pci 0000:04:01.0: PME# disabled [ 0.197189] pci 0000:00:1e.0: transparent bridge [ 0.197193] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.197197] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.197218] pci_bus 0000:00: on NUMA node 0 [ 0.197226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.197351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.197410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.197497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.197549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.200892] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.200998] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.201100] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.201206] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.201308] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.201410] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.201517] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.201620] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.201745] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.201749] vgaarb: loaded [ 0.201867] SCSI subsystem initialized [ 0.201954] libata version 3.00 loaded. [ 0.202027] usbcore: registered new interface driver usbfs [ 0.202039] usbcore: registered new interface driver hub [ 0.202119] usbcore: registered new device driver usb [ 0.202198] ACPI: WMI: Mapper loaded [ 0.202200] PCI: Using ACPI for IRQ routing [ 0.202354] NetLabel: Initializing [ 0.202356] NetLabel: domain hash size = 128 [ 0.202358] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.202370] NetLabel: unlabeled traffic allowed by default [ 0.202403] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.202408] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.202413] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.208056] Switching to clocksource tsc [ 0.210033] AppArmor: AppArmor Filesystem Enabled [ 0.210050] pnp: PnP ACPI init [ 0.210068] ACPI: bus type pnp registered [ 0.215017] pnp: PnP ACPI: found 17 devices [ 0.215019] ACPI: ACPI bus type pnp unregistered [ 0.215023] PnPBIOS: Disabled by ACPI PNP [ 0.215037] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.215047] system 00:09: ioport range 0xa00-0xa0f has been reserved [ 0.215050] system 00:09: ioport range 0xa10-0xa1f has been reserved [ 0.215052] system 00:09: ioport range 0xa20-0xa2f has been reserved [ 0.215055] system 00:09: ioport range 0xa30-0xa3f has been reserved [ 0.215061] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.215063] system 00:0a: ioport range 0x800-0x87f has been reserved [ 0.215066] system 00:0a: ioport range 0x480-0x4bf has been reserved [ 0.215069] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.215072] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.215078] system 00:0d: iomem range 0xffc00000-0xfff7ffff has been reserved [ 0.215083] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.215086] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.215091] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved [ 0.215097] system 00:10: iomem range 0x0-0x9ffff could not be reserved [ 0.215100] system 00:10: iomem range 0xc0000-0xcffff could not be reserved [ 0.215103] system 00:10: iomem range 0xe0000-0xfffff could not be reserved [ 0.215106] system 00:10: iomem range 0x100000-0xbfffffff could not be reserved [ 0.249791] pci 0000:04:01.0: BAR 6: address space collision on of device [0xfebc0000-0xfebdffff] [ 0.249829] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.249832] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.249836] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe9fffff [ 0.249840] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.249844] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.249847] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.249852] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff [ 0.249856] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff [ 0.249863] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.249866] pci 0000:00:1c.1: IO window: 0xd000-0xdfff [ 0.249871] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff [ 0.249875] pci 0000:00:1c.1: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff [ 0.249881] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.249884] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.249889] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff [ 0.249893] pci 0000:00:1e.0: PREFETCH window: 0xc0400000-0xc04fffff [ 0.249910] alloc irq_desc for 16 on node -1 [ 0.249912] alloc kstat_irqs on node -1 [ 0.249919] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.249923] pci 0000:00:01.0: setting latency timer to 64 [ 0.249931] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.249935] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.249939] pci 0000:00:1c.0: setting latency timer to 64 [ 0.249947] alloc irq_desc for 17 on node -1 [ 0.249948] alloc kstat_irqs on node -1 [ 0.249952] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.249956] pci 0000:00:1c.1: setting latency timer to 64 [ 0.249963] pci 0000:00:1e.0: setting latency timer to 64 [ 0.249967] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.249970] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.249972] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.249975] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe9fffff] [ 0.249977] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.249980] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 0.249982] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc01fffff] [ 0.249984] pci_bus 0000:02: resource 2 pref mem [0xc0200000-0xc03fffff] [ 0.249987] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.249989] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.249991] pci_bus 0000:03: resource 2 pref mem [0xf8f00000-0xf8ffffff] [ 0.249994] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] [ 0.249996] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.249998] pci_bus 0000:04: resource 2 pref mem [0xc0400000-0xc04fffff] [ 0.250001] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.250003] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 0.250043] NET: Registered protocol family 2 [ 0.250144] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.250458] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.250917] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.251176] TCP: Hash tables configured (established 131072 bind 65536) [ 0.251179] TCP reno registered [ 0.251308] NET: Registered protocol family 1 [ 0.275826] pci 0000:01:00.0: Boot video device [ 0.276016] cpufreq-nforce2: No nForce2 chipset. [ 0.276044] Scanning for low memory corruption every 60 seconds [ 0.276141] audit: initializing netlink socket (disabled) [ 0.276152] type=2000 audit(1303389610.275:1): initialized [ 0.285302] highmem bounce pool size: 64 pages [ 0.285307] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.286809] VFS: Disk quotas dquot_6.5.2 [ 0.286870] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.287436] fuse init (API version 7.13) [ 0.287520] msgmni has been set to 1663 [ 0.287746] alg: No test for stdrng (krng) [ 0.287812] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.287815] io scheduler noop registered [ 0.287817] io scheduler anticipatory registered [ 0.287818] io scheduler deadline registered [ 0.287860] io scheduler cfq registered (default) [ 0.287993] alloc irq_desc for 24 on node -1 [ 0.287995] alloc kstat_irqs on node -1 [ 0.288003] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.288009] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.288104] alloc irq_desc for 25 on node -1 [ 0.288106] alloc kstat_irqs on node -1 [ 0.288112] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.288120] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.288232] alloc irq_desc for 26 on node -1 [ 0.288234] alloc kstat_irqs on node -1 [ 0.288240] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.288248] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.288330] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.288346] Firmware did not grant requested _OSC control [ 0.288362] Firmware did not grant requested _OSC control [ 0.288388] Firmware did not grant requested _OSC control [ 0.288399] Firmware did not grant requested _OSC control [ 0.288412] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.288511] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.288520] ACPI: Power Button [PWRB] [ 0.288562] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.288564] ACPI: Power Button [PWRF] [ 0.289073] processor LNXCPU:00: registered as cooling_device0 [ 0.289336] processor LNXCPU:01: registered as cooling_device1 [ 0.292634] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.292643] ACPI: Thermal Zone [THRM] (46 C) [ 0.292955] isapnp: Scanning for PnP cards... [ 0.294096] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.294191] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.294517] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.295624] brd: module loaded [ 0.296080] loop: module loaded [ 0.296163] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.296253] ata_piix 0000:00:1f.1: version 2.13 [ 0.296266] alloc irq_desc for 18 on node -1 [ 0.296267] alloc kstat_irqs on node -1 [ 0.296274] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.296310] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.296385] scsi0 : ata_piix [ 0.296451] scsi1 : ata_piix [ 0.297670] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.297673] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.297694] alloc irq_desc for 19 on node -1 [ 0.297696] alloc kstat_irqs on node -1 [ 0.297700] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.297705] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.297735] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.297790] scsi2 : ata_piix [ 0.297960] scsi3 : ata_piix [ 0.299161] ata3: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 19 [ 0.299164] ata4: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 19 [ 0.299485] Fixed MDIO Bus: probed [ 0.299519] PPP generic driver version 2.4.2 [ 0.299565] tun: Universal TUN/TAP device driver, 1.6 [ 0.299567] tun: (C) 1999-2004 Max Krasnyansky [ 0.299667] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.299689] alloc irq_desc for 23 on node -1 [ 0.299691] alloc kstat_irqs on node -1 [ 0.299698] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.299712] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.299715] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.299747] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.299768] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.299795] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.303689] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.303708] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00 [ 0.315826] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.315941] usb usb1: configuration #1 chosen from 1 choice [ 0.315968] hub 1-0:1.0: USB hub found [ 0.315977] hub 1-0:1.0: 6 ports detected [ 0.316041] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.316058] uhci_hcd: USB Universal Host Controller Interface driver [ 0.316097] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.316105] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.316109] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.316144] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.316169] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00 [ 0.316261] usb usb2: configuration #1 chosen from 1 choice [ 0.316284] hub 2-0:1.0: USB hub found [ 0.316290] hub 2-0:1.0: 2 ports detected [ 0.316331] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.316336] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.316339] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.316368] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.316390] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880 [ 0.316469] usb usb3: configuration #1 chosen from 1 choice [ 0.316494] hub 3-0:1.0: USB hub found [ 0.316502] hub 3-0:1.0: 2 ports detected [ 0.316540] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.316545] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.316548] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.316577] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.316606] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800 [ 0.316686] usb usb4: configuration #1 chosen from 1 choice [ 0.316709] hub 4-0:1.0: USB hub found [ 0.316715] hub 4-0:1.0: 2 ports detected [ 0.316807] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.316809] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.316951] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.317028] mice: PS/2 mouse device common for all mice [ 0.317119] rtc_cmos 00:03: RTC can wake from S4 [ 0.317154] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.317176] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.317275] device-mapper: uevent: version 1.0.3 [ 0.334335] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.347549] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.363873] device-mapper: multipath: version 1.1.0 loaded [ 0.363878] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.364058] EISA: Probing bus 0 at eisa.0 [ 0.364064] Cannot allocate resource for EISA slot 1 [ 0.364084] EISA: Detected 0 cards. [ 0.372185] cpuidle: using governor ladder [ 0.372188] cpuidle: using governor menu [ 0.372608] TCP cubic registered [ 0.372761] NET: Registered protocol family 10 [ 0.373218] lo: Disabled Privacy Extensions [ 0.373544] NET: Registered protocol family 17 [ 0.373597] Using IPI No-Shortcut mode [ 0.373683] PM: Resume from disk failed. [ 0.373695] registered taskstats version 1 [ 0.373985] Magic number: 7:968:683 [ 0.374053] rtc_cmos 00:03: setting system clock to 2011-04-21 12:40:10 UTC (1303389610) [ 0.374056] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.374058] EDD information not available. [ 0.375674] Freeing initrd memory: 8033k freed [ 0.460147] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.03, max UDMA/66 [ 0.485615] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133 [ 0.485618] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.492127] ata1.00: configured for UDMA/66 [ 0.500192] ata3.00: configured for UDMA/133 [ 0.651257] isapnp: No Plug & Play device found [ 0.652428] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.03 PQ: 0 ANSI: 5 [ 0.655966] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.655971] Uniform CD-ROM driver Revision: 3.20 [ 0.656130] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.656218] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.656343] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5 [ 0.656444] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 0.656456] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 0.656494] sd 2:0:0:0: [sda] Write Protect is off [ 0.656497] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.656530] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.656667] sda: sda1 sda2 < sda5 > [ 0.686806] sd 2:0:0:0: [sda] Attached SCSI disk [ 0.686819] Freeing unused kernel memory: 664k freed [ 0.687153] Write protecting the kernel text: 4692k [ 0.687193] Write protecting the kernel read-only data: 1844k [ 0.703915] udev: starting version 151 [ 0.762994] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.763012] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.763048] r8169 0000:03:00.0: setting latency timer to 64 [ 0.763094] alloc irq_desc for 27 on node -1 [ 0.763096] alloc kstat_irqs on node -1 [ 0.763109] r8169 0000:03:00.0: irq 27 for MSI/MSI-X [ 0.763729] eth0: RTL8102e at 0xf8038000, 00:30:67:00:2b:8f, XID 04a00000 IRQ 27 [ 0.768956] Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 0.769003] tulip 0000:04:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.769703] tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1. [ 0.776435] md: linear personality registered for level -1 [ 0.812054] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 0.818941] eth1: ADMtek Comet rev 17 at Port 0xe800, 00:0c:41:f1:9a:21, IRQ 16. [ 0.819708] md: multipath personality registered for level -4 [ 0.822155] md: raid0 personality registered for level 0 [ 0.825504] md: raid1 personality registered for level 1 [ 0.827721] async_tx: api initialized (async) [ 0.828563] xor: automatically using best checksumming function: pIII_sse [ 0.847887] pIII_sse : 8139.000 MB/sec [ 0.847887] xor: using function: pIII_sse (8139.000 MB/sec) [ 0.915904] raid6: int32x1 836 MB/s [ 0.983950] raid6: int32x2 776 MB/s [ 0.986541] usb 3-1: configuration #1 chosen from 1 choice [ 0.999234] usbcore: registered new interface driver hiddev [ 1.013702] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4 [ 1.013798] generic-usb 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.1-1/input0 [ 1.013820] usbcore: registered new interface driver usbhid [ 1.013823] usbhid: v2.6:USB HID core driver [ 1.044088] raid6: int32x4 575 MB/s [ 1.112039] raid6: int32x8 541 MB/s [ 1.180002] raid6: mmxx1 2793 MB/s [ 1.248013] raid6: mmxx2 3254 MB/s [ 1.316022] raid6: sse1x1 1896 MB/s [ 1.383996] raid6: sse1x2 2406 MB/s [ 1.452002] raid6: sse2x1 3384 MB/s [ 1.519996] raid6: sse2x2 3917 MB/s [ 1.520002] raid6: using algorithm sse2x2 (3917 MB/s) [ 1.525211] md: raid6 personality registered for level 6 [ 1.525214] md: raid5 personality registered for level 5 [ 1.525216] md: raid4 personality registered for level 4 [ 1.532717] md: raid10 personality registered for level 10 [ 6.556484] EXT3-fs: INFO: recovery required on readonly filesystem. [ 6.556487] EXT3-fs: write access will be enabled during recovery. [ 8.162302] kjournald starting. Commit interval 5 seconds [ 8.162316] EXT3-fs: sda1: orphan cleanup on readonly fs [ 8.162326] ext3_orphan_cleanup: deleting unreferenced inode 20186076 [ 8.227220] ext3_orphan_cleanup: deleting unreferenced inode 28033087 [ 8.235549] ext3_orphan_cleanup: deleting unreferenced inode 28033083 [ 8.238907] ext3_orphan_cleanup: deleting unreferenced inode 20186109 [ 8.248253] ext3_orphan_cleanup: deleting unreferenced inode 20186790 [ 8.254382] ext3_orphan_cleanup: deleting unreferenced inode 17827583 [ 8.259908] ext3_orphan_cleanup: deleting unreferenced inode 17827050 [ 8.259936] ext3_orphan_cleanup: deleting unreferenced inode 20186578 [ 8.281055] ext3_orphan_cleanup: deleting unreferenced inode 20185794 [ 8.281075] EXT3-fs: sda1: 9 orphan inodes deleted [ 8.281079] EXT3-fs: recovery complete. [ 8.323242] EXT3-fs: mounted filesystem with ordered data mode. [ 10.257104] Adding 3068372k swap on /dev/sda5. Priority:-1 extents:1 across:3068372k [ 10.411114] udev: starting version 151 [ 11.501736] lp: driver loaded but no devices found [ 11.666903] parport_pc 00:07: reported by Plug and Play ACPI [ 11.666950] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 11.764328] lp0: using parport0 (interrupt-driven). [ 11.932287] Linux agpgart interface v0.103 [ 11.935007] ppdev: user-space parallel port driver [ 11.935203] intel_rng: FWH not detected [ 11.950561] vga16fb: initializing [ 11.950565] vga16fb: mapped to 0xc00a0000 [ 11.950627] fb0: VGA16 VGA frame buffer device [ 12.123218] nvidia: module license 'NVIDIA' taints kernel. [ 12.123222] Disabling lock debugging due to kernel taint [ 12.667640] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.667649] nvidia 0000:01:00.0: setting latency timer to 64 [ 12.667853] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009 [ 12.940255] Console: switching to colour frame buffer device 80x30 [ 13.882069] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.882138] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 14.021353] hda_codec: ALC662 rev1: BIOS auto-probing. [ 14.022986] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 15.708816] type=1505 audit(1303389625.834:2): operation="profile_load" pid=583 name="/sbin/dhclient3" [ 15.709471] type=1505 audit(1303389625.834:3): operation="profile_load" pid=583 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.709833] type=1505 audit(1303389625.834:4): operation="profile_load" pid=583 name="/usr/lib/connman/scripts/dhclient-script" [ 15.710298] type=1505 audit(1303389625.834:5): operation="profile_replace" pid=500 name="/sbin/dhclient3" [ 15.710957] type=1505 audit(1303389625.834:6): operation="profile_replace" pid=500 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.711320] type=1505 audit(1303389625.834:7): operation="profile_replace" pid=500 name="/usr/lib/connman/scripts/dhclient-script" [ 15.711757] type=1505 audit(1303389625.834:8): operation="profile_replace" pid=519 name="/sbin/dhclient3" [ 15.712429] type=1505 audit(1303389625.834:9): operation="profile_replace" pid=519 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.712793] type=1505 audit(1303389625.838:10): operation="profile_replace" pid=519 name="/usr/lib/connman/scripts/dhclient-script" [ 16.344225] type=1505 audit(1303389626.469:11): operation="profile_load" pid=685 name="/usr/sbin/ntpd" [ 4204.463303] EXT3 FS on sda1, internal journal [ 4205.245833] Registering the dns_resolver key type [ 4205.245847] Slow work thread pool: Starting up [ 4205.245908] Slow work thread pool: Ready [ 4205.557413] CIFS VFS: Error connecting to socket. Aborting operation [ 4205.557419] CIFS VFS: cifs_mount failed w/return code = -101 [ 4205.845970] r8169: eth0: link down [ 4205.846174] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4205.998886] __ratelimit: 6 callbacks suppressed [ 4205.998890] type=1505 audit(1303393816.121:14): operation="profile_replace" pid=942 name="/sbin/dhclient3" [ 4205.999554] type=1505 audit(1303393816.121:15): operation="profile_replace" pid=942 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 4205.999921] type=1505 audit(1303393816.121:16): operation="profile_replace" pid=942 name="/usr/lib/connman/scripts/dhclient-script" [ 4206.107678] type=1505 audit(1303393816.230:17): operation="profile_load" pid=941 name="/usr/share/gdm/guest-session/Xsession" [ 4206.309741] type=1505 audit(1303393816.433:18): operation="profile_load" pid=948 name="/usr/bin/freshclam" [ 4206.531921] type=1505 audit(1303393816.656:19): operation="profile_load" pid=943 name="/usr/bin/evince" [ 4206.540674] type=1505 audit(1303393816.665:20): operation="profile_load" pid=943 name="/usr/bin/evince-previewer" [ 4206.546143] type=1505 audit(1303393816.669:21): operation="profile_load" pid=943 name="/usr/bin/evince-thumbnailer" [ 4206.601790] type=1505 audit(1303393816.727:22): operation="profile_load" pid=954 name="/usr/lib/cups/backend/cups-pdf" [ 4206.602578] type=1505 audit(1303393816.727:23): operation="profile_load" pid=954 name="/usr/sbin/cupsd" [ 4208.886294] 0000:04:01.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113) [ 4208.886306] eth1: Setting full-duplex based on MII#1 link partner capability of 41e1.