[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-30-generic-pae (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #59-Ubuntu SMP Tue Mar 1 23:01:33 UTC 2011 (Ubuntu 2.6.32-30.59-generic-pae 2.6.32.29+drm33.13) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable) [ 0.000000] BIOS-e820: 00000000dfeb0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back [ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable [ 0.000000] 4 base 0100000000 mask FFE0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfeb0000 (usable) [ 0.000000] modified: 00000000dfeb0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] modified: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] modified: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 00e00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 10000-16000 [ 0.000000] RAMDISK: 37866000 - 37fefdb7 [ 0.000000] Allocated new RAMDISK: 00943000 - 010ccdb7 [ 0.000000] Move RAMDISK from 0000000037866000 - 0000000037fefdb6 to 00943000 - 010ccdb6 [ 0.000000] ACPI: RSDP 000f7c80 00024 (v02 Nvidia) [ 0.000000] ACPI: XSDT dfee3100 00054 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP dfeea800 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT dfee3280 07513 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS dfeb0000 00040 [ 0.000000] ACPI: TCPA dfeeaa40 00032 (v01 HTC HTCACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT dfeeaac0 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET dfeead40 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG dfeeadc0 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC dfeea940 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3718MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00012000 - 00018f40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000093a818] TEXT DATA BSS ==> [0000100000 - 000093a818] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [000093b000 - 000094215d] BRK ==> [000093b000 - 000094215d] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000943000 - 00010ccdb7] NEW RAMDISK ==> [0000943000 - 00010ccdb7] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f5fc0] f5fc0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfeb0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048127 [ 0.000000] free_area_init_node: node 0, pgdat c07daf40, node_mem_map c10ce200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7437 pages used for memmap [ 0.000000] HighMem zone: 812965 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c3600000 s39480 r0 d21960 u524288 [ 0.000000] pcpu-alloc: s39480 r0 d21960 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038910 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-30-generic-pae root=UUID=b3323564-c481-48ab-bb97-1a74815fec9b ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 23592640 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:00120000) [ 0.000000] Memory: 4114104k/4718592k available (4842k kernel code, 77212k reserved, 2219k data, 680k init, 3281608k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc07e6000 - 0xc0890000 ( 680 kB) [ 0.000000] .data : 0xc05ba91f - 0xc07e58c8 (2219 kB) [ 0.000000] .text : 0xc0100000 - 0xc05ba91f (4842 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2109.402 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4218.80 BogoMIPS (lpj=8437608) [ 0.004022] Security Framework initialized [ 0.004042] AppArmor: AppArmor initialized [ 0.004049] Mount-cache hash table entries: 512 [ 0.004172] Initializing cgroup subsys ns [ 0.004175] Initializing cgroup subsys cpuacct [ 0.004180] Initializing cgroup subsys memory [ 0.004186] Initializing cgroup subsys devices [ 0.004189] Initializing cgroup subsys freezer [ 0.004192] Initializing cgroup subsys net_cls [ 0.004210] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004213] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004215] CPU: Physical Processor ID: 0 [ 0.004217] CPU: Processor Core ID: 0 [ 0.004221] mce: CPU supports 5 MCE banks [ 0.004230] using C1E aware idle routine [ 0.004238] Performance Events: AMD PMU driver. [ 0.004242] ... version: 0 [ 0.004244] ... bit width: 48 [ 0.004246] ... generic registers: 4 [ 0.004248] ... value mask: 0000ffffffffffff [ 0.004251] ... max period: 00007fffffffffff [ 0.004253] ... fixed-purpose events: 0 [ 0.004255] ... event mask: 000000000000000f [ 0.004259] Checking 'hlt' instruction... OK. [ 0.013126] ACPI: Core revision 20090903 [ 0.024027] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.024037] ftrace: allocating 22430 entries in 44 pages [ 0.028092] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.032386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072075] CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 01 [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] System has AMD C1E enabled [ 0.008000] Switch to broadcast mode on CPU1 [ 0.160067] CPU1: AMD Athlon(tm) X2 Dual Core Processor BE-2350 stepping 01 [ 0.160094] Brought up 2 CPUs [ 0.160096] Total of 2 processors activated (8438.04 BogoMIPS). [ 0.160337] CPU0 attaching sched-domain: [ 0.160340] domain 0: span 0-1 level MC [ 0.160343] groups: 0 1 [ 0.160349] CPU1 attaching sched-domain: [ 0.160351] domain 0: span 0-1 level MC [ 0.160354] groups: 1 0 [ 0.160424] Switch to broadcast mode on CPU0 [ 0.160424] devtmpfs: initialized [ 0.160424] regulator: core version 0.5 [ 0.160424] Time: 17:13:42 Date: 03/20/11 [ 0.160424] NET: Registered protocol family 16 [ 0.160424] EISA bus registered [ 0.160424] ACPI: bus type pci registered [ 0.160424] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.160424] PCI: MCFG area at f0000000 reserved in E820 [ 0.160424] PCI: Using MMCONFIG for extended config space [ 0.160424] PCI: Using configuration type 1 for base access [ 0.161168] Trying to unpack rootfs image as initramfs... [ 0.168003] bio: create slab at 0 [ 0.168003] ACPI: EC: Look up EC in DSDT [ 0.174678] ACPI: Interpreter enabled [ 0.174682] ACPI: (supports S0 S1 S3 S4 S5) [ 0.174710] ACPI: Using IOAPIC for interrupt routing [ 0.185011] ACPI: No dock devices found. [ 0.185114] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.185356] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185360] pci 0000:00:04.0: PME# disabled [ 0.185577] pci 0000:00:09.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.185583] pci 0000:00:09.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.185605] pci 0000:00:09.1: PME# supported from D3hot D3cold [ 0.185610] pci 0000:00:09.1: PME# disabled [ 0.185638] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.185662] pci 0000:00:0a.0: supports D1 D2 [ 0.185664] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185668] pci 0000:00:0a.0: PME# disabled [ 0.185690] pci 0000:00:0a.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.185715] pci 0000:00:0a.1: supports D1 D2 [ 0.185717] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185721] pci 0000:00:0a.1: PME# disabled [ 0.185752] pci 0000:00:0c.0: reg 20 io port: [0xf400-0xf40f] [ 0.185790] pci 0000:00:0d.0: reg 10 io port: [0x9f0-0x9f7] [ 0.185794] pci 0000:00:0d.0: reg 14 io port: [0xbf0-0xbf3] [ 0.185799] pci 0000:00:0d.0: reg 18 io port: [0x970-0x977] [ 0.185803] pci 0000:00:0d.0: reg 1c io port: [0xb70-0xb73] [ 0.185807] pci 0000:00:0d.0: reg 20 io port: [0xe000-0xe00f] [ 0.185812] pci 0000:00:0d.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.185850] pci 0000:00:0d.1: reg 10 io port: [0x9e0-0x9e7] [ 0.185854] pci 0000:00:0d.1: reg 14 io port: [0xbe0-0xbe3] [ 0.185859] pci 0000:00:0d.1: reg 18 io port: [0x960-0x967] [ 0.185863] pci 0000:00:0d.1: reg 1c io port: [0xb60-0xb63] [ 0.185868] pci 0000:00:0d.1: reg 20 io port: [0xcc00-0xcc0f] [ 0.185872] pci 0000:00:0d.1: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.185910] pci 0000:00:0d.2: reg 10 io port: [0xc800-0xc807] [ 0.185915] pci 0000:00:0d.2: reg 14 io port: [0xc400-0xc403] [ 0.185919] pci 0000:00:0d.2: reg 18 io port: [0xc000-0xc007] [ 0.185924] pci 0000:00:0d.2: reg 1c io port: [0xbc00-0xbc03] [ 0.185928] pci 0000:00:0d.2: reg 20 io port: [0xb800-0xb80f] [ 0.185933] pci 0000:00:0d.2: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.186007] pci 0000:00:0e.1: reg 10 32bit mmio: [0xfe020000-0xfe023fff] [ 0.186035] pci 0000:00:0e.1: PME# supported from D3hot D3cold [ 0.186039] pci 0000:00:0e.1: PME# disabled [ 0.186082] pci 0000:00:10.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.186087] pci 0000:00:10.0: reg 14 io port: [0xb400-0xb407] [ 0.186091] pci 0000:00:10.0: reg 18 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.186096] pci 0000:00:10.0: reg 1c 32bit mmio: [0xfe028000-0xfe02800f] [ 0.186121] pci 0000:00:10.0: supports D1 D2 [ 0.186123] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.186128] pci 0000:00:10.0: PME# disabled [ 0.186166] pci 0000:00:11.0: reg 10 32bit mmio: [0xfe027000-0xfe027fff] [ 0.186171] pci 0000:00:11.0: reg 14 io port: [0xb000-0xb007] [ 0.186175] pci 0000:00:11.0: reg 18 32bit mmio: [0xfe026000-0xfe0260ff] [ 0.186180] pci 0000:00:11.0: reg 1c 32bit mmio: [0xfe025000-0xfe02500f] [ 0.186205] pci 0000:00:11.0: supports D1 D2 [ 0.186207] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.186212] pci 0000:00:11.0: PME# disabled [ 0.186264] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.186267] pci 0000:00:16.0: PME# disabled [ 0.186362] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.186370] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.186377] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.186383] pci 0000:01:00.0: reg 24 io port: [0xac00-0xac7f] [ 0.186388] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfbfe0000-0xfbffffff] [ 0.186439] pci 0000:00:04.0: bridge io port: [0xa000-0xafff] [ 0.186442] pci 0000:00:04.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.186446] pci 0000:00:04.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.186481] pci 0000:02:0b.0: reg 10 32bit mmio: [0xfdfff000-0xfdfff7ff] [ 0.186487] pci 0000:02:0b.0: reg 14 32bit mmio: [0xfdff8000-0xfdffbfff] [ 0.186517] pci 0000:02:0b.0: supports D1 D2 [ 0.186519] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.186523] pci 0000:02:0b.0: PME# disabled [ 0.186545] pci 0000:00:0e.0: transparent bridge [ 0.186549] pci 0000:00:0e.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.186600] pci 0000:03:00.0: reg 10 64bit mmio: [0xfdeff000-0xfdeff07f] [ 0.186614] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdef8000-0xfdefbfff] [ 0.186622] pci 0000:03:00.0: reg 20 io port: [0x9c00-0x9c7f] [ 0.186636] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfde00000-0xfde7ffff] [ 0.186669] pci 0000:03:00.0: supports D1 D2 [ 0.186714] pci 0000:00:16.0: bridge io port: [0x9000-0x9fff] [ 0.186717] pci 0000:00:16.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.186727] pci_bus 0000:00: on NUMA node 0 [ 0.186733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.187101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.257840] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15) [ 0.257991] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.258142] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.258298] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.258449] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15) [ 0.258598] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.258749] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) [ 0.258897] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.259048] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.259198] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15) [ 0.259355] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.259511] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15) [ 0.259661] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 0.259809] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.259961] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 0.260119] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.260274] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.260425] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) [ 0.260575] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) [ 0.260725] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) [ 0.260921] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.261105] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.261290] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.261475] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.261660] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 0.261845] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.262030] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 0.262215] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.262400] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.262586] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.262771] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 [ 0.262958] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.263144] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.263330] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.263516] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.263702] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.263889] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.264084] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.264272] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.264459] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.264596] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.264600] vgaarb: loaded [ 0.264711] SCSI subsystem initialized [ 0.268001] libata version 3.00 loaded. [ 0.268001] usbcore: registered new interface driver usbfs [ 0.268001] usbcore: registered new interface driver hub [ 0.268001] usbcore: registered new device driver usb [ 0.268001] ACPI: WMI: Mapper loaded [ 0.268001] PCI: Using ACPI for IRQ routing [ 0.268001] NetLabel: Initializing [ 0.268001] NetLabel: domain hash size = 128 [ 0.268001] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.268001] NetLabel: unlabeled traffic allowed by default [ 0.268001] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.268001] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.276053] Switching to clocksource hpet [ 0.281761] AppArmor: AppArmor Filesystem Enabled [ 0.281781] pnp: PnP ACPI init [ 0.281799] ACPI: bus type pnp registered [ 0.287031] pnp: PnP ACPI: found 15 devices [ 0.287033] ACPI: ACPI bus type pnp unregistered [ 0.287037] PnPBIOS: Disabled by ACPI PNP [ 0.287049] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.287052] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.287055] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.287058] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.287061] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.287064] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.287071] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.287074] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.287077] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.287086] system 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.287092] system 00:0e: iomem range 0xcca00-0xcffff has been reserved [ 0.287095] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved [ 0.287098] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved [ 0.287101] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved [ 0.287104] system 00:0e: iomem range 0xfefff000-0xfefff0ff has been reserved [ 0.287108] system 00:0e: iomem range 0xdfeb0000-0xdfefffff could not be reserved [ 0.287111] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved [ 0.287114] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.287117] system 00:0e: iomem range 0x100000-0xdfeaffff could not be reserved [ 0.287121] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.287124] system 00:0e: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.287128] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.287131] system 00:0e: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.287134] system 00:0e: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.287137] system 00:0e: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.321865] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.321868] pci 0000:00:04.0: IO window: 0xa000-0xafff [ 0.321872] pci 0000:00:04.0: MEM window: 0xf8000000-0xfbffffff [ 0.321876] pci 0000:00:04.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.321880] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02 [ 0.321882] pci 0000:00:0e.0: IO window: disabled [ 0.321886] pci 0000:00:0e.0: MEM window: 0xfdf00000-0xfdffffff [ 0.321889] pci 0000:00:0e.0: PREFETCH window: disabled [ 0.321893] pci 0000:00:16.0: PCI bridge, secondary bus 0000:03 [ 0.321896] pci 0000:00:16.0: IO window: 0x9000-0x9fff [ 0.321899] pci 0000:00:16.0: MEM window: 0xfde00000-0xfdefffff [ 0.321902] pci 0000:00:16.0: PREFETCH window: disabled [ 0.321912] pci 0000:00:04.0: setting latency timer to 64 [ 0.321917] pci 0000:00:0e.0: setting latency timer to 64 [ 0.321923] pci 0000:00:16.0: setting latency timer to 64 [ 0.321927] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.321930] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.321933] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.321936] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.321939] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.321942] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.321945] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.321948] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.321951] pci_bus 0000:03: resource 0 io: [0x9000-0x9fff] [ 0.321953] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.321989] NET: Registered protocol family 2 [ 0.322088] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.322427] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.323125] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.323541] TCP: Hash tables configured (established 131072 bind 65536) [ 0.323544] TCP reno registered [ 0.323651] NET: Registered protocol family 1 [ 0.323707] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.336166] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.336217] pci 0000:00:0d.1: Enabling HT MSI Mapping [ 0.336266] pci 0000:00:0d.2: Enabling HT MSI Mapping [ 0.336313] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.336365] pci 0000:00:0e.1: Enabling HT MSI Mapping [ 0.336427] pci 0000:00:10.0: Enabling HT MSI Mapping [ 0.336496] pci 0000:00:11.0: Enabling HT MSI Mapping [ 0.336574] pci 0000:00:16.0: Enabling HT MSI Mapping [ 0.336591] pci 0000:01:00.0: Boot video device [ 0.336790] cpufreq-nforce2: No nForce2 chipset. [ 0.336817] Scanning for low memory corruption every 60 seconds [ 0.336928] audit: initializing netlink socket (disabled) [ 0.336939] type=2000 audit(1300641221.336:1): initialized [ 0.347104] highmem bounce pool size: 64 pages [ 0.347110] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.348547] VFS: Disk quotas dquot_6.5.2 [ 0.348605] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.349176] fuse init (API version 7.13) [ 0.349259] msgmni has been set to 1628 [ 0.349476] alg: No test for stdrng (krng) [ 0.349531] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.349534] io scheduler noop registered [ 0.349536] io scheduler anticipatory registered [ 0.349538] io scheduler deadline registered [ 0.349576] io scheduler cfq registered (default) [ 0.349723] alloc irq_desc for 24 on node -1 [ 0.349725] alloc kstat_irqs on node -1 [ 0.349734] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X [ 0.349739] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.349815] alloc irq_desc for 25 on node -1 [ 0.349817] alloc kstat_irqs on node -1 [ 0.349822] pcieport 0000:00:16.0: irq 25 for MSI/MSI-X [ 0.349827] pcieport 0000:00:16.0: setting latency timer to 64 [ 0.349888] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.349911] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.350023] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.350027] ACPI: Power Button [PWRB] [ 0.350090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.350093] ACPI: Power Button [PWRF] [ 0.350144] fan PNP0C0B:00: registered as cooling_device0 [ 0.350149] ACPI: Fan [FAN] (on) [ 0.350538] ACPI: processor limited to max C-state 1 [ 0.350555] processor LNXCPU:00: registered as cooling_device1 [ 0.350588] processor LNXCPU:01: registered as cooling_device2 [ 0.355421] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20090903/nspredef-1012) [ 0.355430] ACPI: Expecting a [Reference] package element, found type 0 [ 0.355432] ACPI: Invalid passive threshold [ 0.355786] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.355793] ACPI: Thermal Zone [THRM] (40 C) [ 0.356168] isapnp: Scanning for PnP cards... [ 0.357445] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.357548] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.357875] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.358962] brd: module loaded [ 0.359461] loop: module loaded [ 0.359554] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.359759] pata_acpi 0000:00:0c.0: setting latency timer to 64 [ 0.360112] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.360117] alloc irq_desc for 23 on node -1 [ 0.360119] alloc kstat_irqs on node -1 [ 0.360130] pata_acpi 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.360154] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 0.360162] pata_acpi 0000:00:0d.0: PCI INT A disabled [ 0.360454] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.360457] alloc irq_desc for 22 on node -1 [ 0.360459] alloc kstat_irqs on node -1 [ 0.360466] pata_acpi 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.360483] pata_acpi 0000:00:0d.1: setting latency timer to 64 [ 0.360491] pata_acpi 0000:00:0d.1: PCI INT B disabled [ 0.360809] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 0.360812] alloc irq_desc for 21 on node -1 [ 0.360813] alloc kstat_irqs on node -1 [ 0.360821] pata_acpi 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 0.360837] pata_acpi 0000:00:0d.2: setting latency timer to 64 [ 0.360845] pata_acpi 0000:00:0d.2: PCI INT C disabled [ 0.361158] Fixed MDIO Bus: probed [ 0.361195] PPP generic driver version 2.4.2 [ 0.361239] tun: Universal TUN/TAP device driver, 1.6 [ 0.361241] tun: (C) 1999-2004 Max Krasnyansky [ 0.361327] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.361623] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 0.361626] alloc irq_desc for 20 on node -1 [ 0.361628] alloc kstat_irqs on node -1 [ 0.361636] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20 [ 0.361656] ehci_hcd 0000:00:0a.1: setting latency timer to 64 [ 0.361659] ehci_hcd 0000:00:0a.1: EHCI Host Controller [ 0.361696] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1 [ 0.361730] ehci_hcd 0000:00:0a.1: debug port 1 [ 0.361738] ehci_hcd 0000:00:0a.1: cache line size of 64 is not supported [ 0.361759] ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfe02e000 [ 0.385116] Freeing initrd memory: 7719k freed [ 0.407933] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00 [ 0.408030] usb usb1: configuration #1 chosen from 1 choice [ 0.408061] hub 1-0:1.0: USB hub found [ 0.408069] hub 1-0:1.0: 8 ports detected [ 0.408130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.408433] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.408437] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.408447] ohci_hcd 0000:00:0a.0: setting latency timer to 64 [ 0.408450] ohci_hcd 0000:00:0a.0: OHCI Host Controller [ 0.408484] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2 [ 0.408525] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000 [ 0.466663] usb usb2: configuration #1 chosen from 1 choice [ 0.466696] hub 2-0:1.0: USB hub found [ 0.466712] hub 2-0:1.0: 8 ports detected [ 0.466787] uhci_hcd: USB Universal Host Controller Interface driver [ 0.466888] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.467304] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.467317] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.467395] mice: PS/2 mouse device common for all mice [ 0.467505] rtc_cmos 00:05: RTC can wake from S4 [ 0.467547] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.467583] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.467687] device-mapper: uevent: version 1.0.3 [ 0.467807] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.467875] device-mapper: multipath: version 1.1.0 loaded [ 0.467877] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.467991] EISA: Probing bus 0 at eisa.0 [ 0.467998] Cannot allocate resource for EISA slot 1 [ 0.468030] EISA: Detected 0 cards. [ 0.468107] cpuidle: using governor ladder [ 0.468109] cpuidle: using governor menu [ 0.468520] TCP cubic registered [ 0.468677] NET: Registered protocol family 10 [ 0.469121] lo: Disabled Privacy Extensions [ 0.469430] NET: Registered protocol family 17 [ 0.469460] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor BE-2350 processors (2 cpu cores) (version 2.20.00) [ 0.469509] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xe [ 0.469512] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xf [ 0.469515] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x11 [ 0.469517] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 0.469561] Using IPI No-Shortcut mode [ 0.469635] PM: Resume from disk failed. [ 0.469646] registered taskstats version 1 [ 0.470033] Magic number: 3:455:239 [ 0.470076] pci 0000:00:0c.0: hash matches [ 0.470138] rtc_cmos 00:05: setting system clock to 2011-03-20 17:13:42 UTC (1300641222) [ 0.470141] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.470143] EDD information not available. [ 0.499967] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.712472] isapnp: No Plug & Play device found [ 0.712497] Freeing unused kernel memory: 680k freed [ 0.712977] Write protecting the kernel text: 4844k [ 0.713045] Write protecting the kernel read-only data: 1884k [ 0.732151] udev: starting version 151 [ 0.828525] pata_amd 0000:00:0c.0: version 0.4.1 [ 0.828576] pata_amd 0000:00:0c.0: setting latency timer to 64 [ 0.853749] scsi0 : pata_amd [ 0.864488] scsi1 : pata_amd [ 0.865332] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14 [ 0.865336] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15 [ 0.865401] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.865705] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 0.865710] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 0.865715] forcedeth 0000:00:10.0: setting latency timer to 64 [ 0.865765] nv_probe: set workaround bit for reversed mac addr [ 0.881909] sata_sil24 0000:03:00.0: version 1.1 [ 0.882262] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 0.882267] alloc irq_desc for 16 on node -1 [ 0.882270] alloc kstat_irqs on node -1 [ 0.882281] sata_sil24 0000:03:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 0.882365] sata_sil24 0000:03:00.0: setting latency timer to 64 [ 0.883798] scsi2 : sata_sil24 [ 0.883922] scsi3 : sata_sil24 [ 0.883971] ata3: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdef8000 irq 16 [ 0.883975] ata4: SATA max UDMA/100 host m128@0xfdeff000 port 0xfdefa000 irq 16 [ 0.885038] Floppy drive(s): fd0 is 1.44M [ 0.904446] FDC 0 is a post-1991 82077 [ 0.984342] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 1.037016] ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L23, max UDMA/33 [ 1.052768] ata1.01: ATA-8: WDC WD4000AAKB-00YSA0, 12.01C02, max UDMA/100 [ 1.052772] ata1.01: 781422768 sectors, multi 1: LBA48 [ 1.052800] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c60000) ACPI=0x701f (60:20:0x1f) [ 1.052806] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc0c60000) ACPI=0x3f01f (60:20:0x1f) [ 1.068562] ata1.00: configured for UDMA/33 [ 1.085220] ata1.01: configured for UDMA/100 [ 1.089684] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0L23 PQ: 0 ANSI: 5 [ 1.106106] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 1.106109] Uniform CD-ROM driver Revision: 3.20 [ 1.106227] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.106292] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.106410] scsi 0:0:1:0: Direct-Access ATA WDC WD4000AAKB-0 12.0 PQ: 0 ANSI: 5 [ 1.106559] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.106645] ata2: port disabled. ignoring. [ 1.106735] sd 0:0:1:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB) [ 1.106843] sd 0:0:1:0: [sda] Write Protect is off [ 1.106846] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.106890] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.107122] sda: sda1 [ 1.115307] sd 0:0:1:0: [sda] Attached SCSI disk [ 1.196814] usb 2-2: configuration #1 chosen from 1 choice [ 1.385080] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:92:98:2c:e9 [ 1.385085] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.385116] sata_nv 0000:00:0d.0: version 3.5 [ 1.385132] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.385135] sata_nv 0000:00:0d.0: Using SWNCQ mode [ 1.385532] sata_nv 0000:00:0d.0: setting latency timer to 64 [ 1.385705] scsi4 : sata_nv [ 1.385782] scsi5 : sata_nv [ 1.385982] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23 [ 1.385986] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23 [ 1.386349] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21 [ 1.386354] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21 [ 1.386359] forcedeth 0000:00:11.0: setting latency timer to 64 [ 1.386406] nv_probe: set workaround bit for reversed mac addr [ 1.696234] ata5: SATA link down (SStatus 0 SControl 300) [ 1.905087] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1a:92:98:33:44 [ 1.905091] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.905136] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 1.905142] sata_nv 0000:00:0d.1: Using SWNCQ mode [ 1.905549] sata_nv 0000:00:0d.1: setting latency timer to 64 [ 1.905727] scsi6 : sata_nv [ 1.905807] scsi7 : sata_nv [ 1.905991] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22 [ 1.905995] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22 [ 1.906039] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 1.906042] sata_nv 0000:00:0d.2: Using SWNCQ mode [ 1.906346] sata_nv 0000:00:0d.2: setting latency timer to 64 [ 1.906565] scsi8 : sata_nv [ 1.906663] scsi9 : sata_nv [ 1.906861] ata9: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 21 [ 1.906865] ata10: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 21 [ 2.372349] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.372483] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.380597] ata7.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 2.380601] ata7.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 2.380723] ata9.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 [ 2.380728] ata9.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 2.388526] ata7.00: configured for UDMA/133 [ 2.388888] ata9.00: configured for UDMA/133 [ 2.964347] ata3: SATA link down (SStatus 0 SControl 0) [ 5.044243] ata4: SATA link down (SStatus 0 SControl 0) [ 5.356233] ata6: SATA link down (SStatus 0 SControl 300) [ 5.356488] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 5.356687] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 5.356709] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 5.356857] sd 6:0:0:0: [sdb] Write Protect is off [ 5.356860] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.356914] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.357165] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > [ 5.413125] sd 6:0:0:0: [sdb] Attached SCSI disk [ 5.668234] ata8: SATA link down (SStatus 0 SControl 300) [ 5.668459] scsi 8:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 5.668604] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 5.668702] sd 8:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 5.668741] sd 8:0:0:0: [sdc] Write Protect is off [ 5.668744] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.668766] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.668882] sdc: sdc1 sdc2 < sdc5 > [ 5.695972] sd 8:0:0:0: [sdc] Attached SCSI disk [ 6.136244] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.144394] ata10.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB02, max UDMA/100 [ 6.160415] ata10.00: configured for UDMA/100 [ 6.162069] scsi 9:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB02 PQ: 0 ANSI: 5 [ 6.167458] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.167578] sr 9:0:0:0: Attached scsi CD-ROM sr1 [ 6.167644] sr 9:0:0:0: Attached scsi generic sg4 type 5 [ 6.171583] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 6.171589] ohci1394 0000:02:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 6.176284] usbcore: registered new interface driver hiddev [ 6.182008] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.0/input/input4 [ 6.182127] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:0a.0-2/input0 [ 6.182154] usbcore: registered new interface driver usbhid [ 6.182157] usbhid: v2.6:USB HID core driver [ 6.224755] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 6.602147] EXT4-fs (sdb6): mounted filesystem with ordered data mode [ 7.497026] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800012e1e56] [ 8.345900] Adding 10578936k swap on /dev/sdb7. Priority:-1 extents:1 across:10578936k [ 8.919662] udev: starting version 151 [ 9.841181] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 9.890563] psmouse serio1: ID: 10 00 64 [ 9.923531] lp: driver loaded but no devices found [ 9.930646] ACPI: resource nForce2_smbus [0x1c00-0x1c3f] conflicts with ACPI region SM00 [0x1c00-0x1c05] [ 9.930650] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.930653] nForce2_smbus 0000:00:09.1: Error probing SMB1. [ 9.930752] i2c i2c-0: nForce2 SMBus adapter at 0x1c40 [ 9.950615] parport_pc 00:0a: reported by Plug and Play ACPI [ 9.950645] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 9.953771] logips2pp: Detected unknown logitech mouse model 74 [ 10.044932] lp0: using parport0 (interrupt-driven). [ 10.071720] vga16fb: initializing [ 10.071726] vga16fb: mapped to 0xc00a0000 [ 10.071803] fb0: VGA16 VGA frame buffer device [ 10.080398] ppdev: user-space parallel port driver [ 10.470813] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input5 [ 11.225463] Linux agpgart interface v0.103 [ 11.262803] kjournald starting. Commit interval 5 seconds [ 11.262826] EXT3-fs warning: checktime reached, running e2fsck is recommended [ 11.263356] EXT3 FS on sda1, internal journal [ 11.263362] EXT3-fs: mounted filesystem with ordered data mode. [ 12.620151] Console: switching to colour frame buffer device 80x30 [ 12.756677] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended [ 12.874377] nvidia: module license 'NVIDIA' taints kernel. [ 12.874382] Disabling lock debugging due to kernel taint [ 13.510547] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 13.543945] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 13.543952] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 13.543959] nvidia 0000:01:00.0: setting latency timer to 64 [ 13.544198] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009 [ 13.582544] kjournald starting. Commit interval 5 seconds [ 13.582562] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [ 13.583776] EXT3 FS on sdc1, internal journal [ 13.583782] EXT3-fs: mounted filesystem with ordered data mode. [ 13.592081] type=1505 audit(1300641235.618:2): operation="profile_load" pid=596 name="/sbin/dhclient3" [ 13.592109] type=1505 audit(1300641235.618:3): operation="profile_replace" pid=624 name="/sbin/dhclient3" [ 13.592368] type=1505 audit(1300641235.618:4): operation="profile_load" pid=596 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.592415] type=1505 audit(1300641235.618:5): operation="profile_replace" pid=624 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.592565] type=1505 audit(1300641235.622:6): operation="profile_load" pid=596 name="/usr/lib/connman/scripts/dhclient-script" [ 13.592589] type=1505 audit(1300641235.622:7): operation="profile_replace" pid=624 name="/usr/lib/connman/scripts/dhclient-script" [ 13.592860] type=1505 audit(1300641235.622:8): operation="profile_replace" pid=623 name="/sbin/dhclient3" [ 13.593153] type=1505 audit(1300641235.622:9): operation="profile_replace" pid=623 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.593317] type=1505 audit(1300641235.622:10): operation="profile_replace" pid=623 name="/usr/lib/connman/scripts/dhclient-script" [ 13.851820] type=1505 audit(1300641235.878:11): operation="profile_load" pid=830 name="/usr/sbin/ntpd" [ 14.161664] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 14.161671] HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20 [ 14.161675] hda_intel: Disable MSI for Nvidia chipset [ 14.161701] HDA Intel 0000:00:0e.1: setting latency timer to 64 [ 15.315517] hda_codec: AD1988B: BIOS auto-probing. [ 15.315605] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.1/input/input6 [ 19.066035] alloc irq_desc for 26 on node -1 [ 19.066040] alloc kstat_irqs on node -1 [ 19.066050] forcedeth 0000:00:10.0: irq 26 for MSI/MSI-X [ 19.069646] alloc irq_desc for 27 on node -1 [ 19.069650] alloc kstat_irqs on node -1 [ 19.069659] forcedeth 0000:00:11.0: irq 27 for MSI/MSI-X