[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: root=UUID=6a98b6c0-9ccf-477b-b197-d73c4162f581 ro nomodeset [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afef0000 (usable) [ 0.000000] BIOS-e820: 00000000afef0000 - 00000000afef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afef3000 - 00000000aff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000150000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x150000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 100000000 mask FC0000000 write-back [ 0.000000] 1 base 140000000 mask FF0000000 write-back [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 080000000 mask FE0000000 write-back [ 0.000000] 4 base 0A0000000 mask FF0000000 write-back [ 0.000000] 5 base 0AFF00000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000aff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xafef0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009b800 (usable) [ 0.000000] modified: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000afef0000 (usable) [ 0.000000] modified: 00000000afef0000 - 00000000afef3000 (ACPI NVS) [ 0.000000] modified: 00000000afef3000 - 00000000aff00000 (ACPI data) [ 0.000000] modified: 00000000d0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000150000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000afef0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00afe00000 page 2M [ 0.000000] 00afe00000 - 00afef0000 page 4k [ 0.000000] kernel direct mapping tables up to afef0000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000150000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0150000000 page 2M [ 0.000000] kernel direct mapping tables up to 150000000 @ 13000-1a000 [ 0.000000] RAMDISK: 376da000 - 37fefd8d [ 0.000000] ACPI: RSDP 00000000000f8700 00014 (v00 EVGA ) [ 0.000000] ACPI: RSDT 00000000afef3040 0003C (v01 EVGA NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: FACP 00000000afef30c0 00074 (v01 EVGA NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: DSDT 00000000afef3180 05283 (v01 EVGA NVDAACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000afef0000 00040 [ 0.000000] ACPI: HPET 00000000afef8580 00038 (v01 EVGA NVDAACPI 42302E31 NVDA 00000098) [ 0.000000] ACPI: WDRT 00000000afef8600 00047 (v01 EVGA NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: MCFG 00000000afef86c0 0003C (v01 EVGA NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: APIC 00000000afef8480 00098 (v01 EVGA NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: SSDT 00000000afef9020 003A8 (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000150000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000150000000 [ 0.000000] NODE_DATA [0000000000015000 - 0000000000019fff] [ 0.000000] bootmap [000000000001a000 - 0000000000043fff] pages 2a [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0150000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [00376da000 - 0037fefd8d] RAMDISK ==> [00376da000 - 0037fefd8d] [ 0.000000] #4 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a0be] BRK ==> [0001a2a000 - 0001a2a0be] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 0000015000] PGTABLE ==> [0000013000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000f4740] f4740 [ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00150000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x000afef0 [ 0.000000] 0: 0x00100000 -> 0x00150000 [ 0.000000] On node 0 totalpages: 1048187 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 108 pages reserved [ 0.000000] DMA zone: 3815 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 702248 pages, LIFO batch:31 [ 0.000000] Normal zone: 4480 pages used for memmap [ 0.000000] Normal zone: 323200 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000afef0000 - 00000000afef3000 [ 0.000000] PM: Registered nosave memory: 00000000afef3000 - 00000000aff00000 [ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:20100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029263 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=6a98b6c0-9ccf-477b-b197-d73c4162f581 ro nomodeset [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 4046936k/5505024k available (5409k kernel code, 1312276k absent, 145812k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2666.817 MHz processor. [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.63 BogoMIPS (lpj=26668170) [ 0.010154] Security Framework initialized [ 0.010231] AppArmor: AppArmor initialized [ 0.010621] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012858] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.014057] Mount-cache hash table entries: 256 [ 0.014262] Initializing cgroup subsys ns [ 0.014327] Initializing cgroup subsys cpuacct [ 0.014389] Initializing cgroup subsys memory [ 0.014457] Initializing cgroup subsys devices [ 0.014518] Initializing cgroup subsys freezer [ 0.014580] Initializing cgroup subsys net_cls [ 0.014658] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.014766] CPU: L2 cache: 4096K [ 0.014827] CPU 0/0x0 -> Node 0 [ 0.014887] CPU: Physical Processor ID: 0 [ 0.014948] CPU: Processor Core ID: 0 [ 0.015009] mce: CPU supports 6 MCE banks [ 0.015076] CPU0: Thermal monitoring enabled (TM2) [ 0.015140] using mwait in idle threads. [ 0.015201] Performance Events: Core2 events, Intel PMU driver. [ 0.015360] ... version: 2 [ 0.015420] ... bit width: 40 [ 0.015481] ... generic registers: 2 [ 0.015541] ... value mask: 000000ffffffffff [ 0.015603] ... max period: 000000007fffffff [ 0.015665] ... fixed-purpose events: 3 [ 0.015725] ... event mask: 0000000700000003 [ 0.020060] ACPI: Core revision 20090903 [ 0.027340] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.027405] ftrace: allocating 22518 entries in 89 pages [ 0.030052] Setting APIC routing to flat [ 0.030511] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.135722] CPU0: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07 [ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 4096K [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] CPU1: Thermal monitoring enabled (TM2) [ 0.290047] CPU1: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07 [ 0.290620] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.300094] Booting processor 2 APIC 0x3 ip 0x6000 [ 0.020000] Initializing CPU#2 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 4096K [ 0.020000] CPU 2/0x3 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 3 [ 0.020000] CPU2: Thermal monitoring enabled (TM2) [ 0.460040] CPU2: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07 [ 0.460612] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.470074] Booting processor 3 APIC 0x2 ip 0x6000 [ 0.020000] Initializing CPU#3 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 4096K [ 0.020000] CPU 3/0x2 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 2 [ 0.020000] CPU3: Thermal monitoring enabled (TM2) [ 0.630093] CPU3: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07 [ 0.630665] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.640010] Brought up 4 CPUs [ 0.640080] Total of 4 processors activated (21333.67 BogoMIPS). [ 0.641482] CPU0 attaching sched-domain: [ 0.641485] domain 0: span 0-1 level MC [ 0.641487] groups: 0 1 [ 0.641490] domain 1: span 0-3 level CPU [ 0.641492] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048) [ 0.641499] CPU1 attaching sched-domain: [ 0.641500] domain 0: span 0-1 level MC [ 0.641502] groups: 1 0 [ 0.641505] domain 1: span 0-3 level CPU [ 0.641507] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048) [ 0.641511] CPU2 attaching sched-domain: [ 0.641513] domain 0: span 2-3 level MC [ 0.641514] groups: 2 3 [ 0.641517] domain 1: span 0-3 level CPU [ 0.641519] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048) [ 0.641524] CPU3 attaching sched-domain: [ 0.641525] domain 0: span 2-3 level MC [ 0.641527] groups: 3 2 [ 0.641530] domain 1: span 0-3 level CPU [ 0.641531] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048) [ 0.641669] devtmpfs: initialized [ 0.641669] regulator: core version 0.5 [ 0.641669] Time: 12:50:55 Date: 05/10/10 [ 0.641669] NET: Registered protocol family 16 [ 0.641669] Trying to unpack rootfs image as initramfs... [ 0.641669] ACPI: bus type pci registered [ 0.641669] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.641669] PCI: MCFG area at e0000000 reserved in E820 [ 0.650009] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.650072] PCI: Using configuration type 1 for base access [ 0.650742] bio: create slab at 0 [ 0.650781] ACPI: EC: Look up EC in DSDT [ 0.656698] ACPI: Interpreter enabled [ 0.656761] ACPI: (supports S0 S1 S3 S4 S5) [ 0.657078] ACPI: Using IOAPIC for interrupt routing [ 0.665335] ACPI: No dock devices found. [ 0.665524] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.666420] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.666485] pci 0000:00:03.0: PME# disabled [ 0.666731] pci 0000:00:0a.0: reg 10 io port: [0xfc00-0xfc7f] [ 0.666780] pci 0000:00:0a.1: reg 10 io port: [0xf800-0xf83f] [ 0.666796] pci 0000:00:0a.1: reg 20 io port: [0xf400-0xf43f] [ 0.666801] pci 0000:00:0a.1: reg 24 io port: [0xf000-0xf03f] [ 0.666825] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.666891] pci 0000:00:0a.1: PME# disabled [ 0.666984] pci 0000:00:0b.0: reg 10 32bit mmio: [0xcffff000-0xcfffffff] [ 0.667015] pci 0000:00:0b.0: supports D1 D2 [ 0.667016] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.667081] pci 0000:00:0b.0: PME# disabled [ 0.667167] pci 0000:00:0b.1: reg 10 32bit mmio: [0xcfffe000-0xcfffe0ff] [ 0.667198] pci 0000:00:0b.1: supports D1 D2 [ 0.667200] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.667265] pci 0000:00:0b.1: PME# disabled [ 0.667365] pci 0000:00:0d.0: reg 20 io port: [0xec00-0xec0f] [ 0.667410] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] [ 0.667414] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] [ 0.667419] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] [ 0.667423] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] [ 0.667427] pci 0000:00:0e.0: reg 20 io port: [0xd800-0xd80f] [ 0.667431] pci 0000:00:0e.0: reg 24 32bit mmio: [0xcfffd000-0xcfffdfff] [ 0.667479] pci 0000:00:0e.1: reg 10 io port: [0x9e0-0x9e7] [ 0.667484] pci 0000:00:0e.1: reg 14 io port: [0xbe0-0xbe3] [ 0.667489] pci 0000:00:0e.1: reg 18 io port: [0x960-0x967] [ 0.667493] pci 0000:00:0e.1: reg 1c io port: [0xb60-0xb63] [ 0.667498] pci 0000:00:0e.1: reg 20 io port: [0xc400-0xc40f] [ 0.667502] pci 0000:00:0e.1: reg 24 32bit mmio: [0xcfffc000-0xcfffcfff] [ 0.667550] pci 0000:00:0e.2: reg 10 io port: [0xc000-0xc007] [ 0.667554] pci 0000:00:0e.2: reg 14 io port: [0xbc00-0xbc03] [ 0.667558] pci 0000:00:0e.2: reg 18 io port: [0xb800-0xb807] [ 0.667563] pci 0000:00:0e.2: reg 1c io port: [0xb400-0xb403] [ 0.667567] pci 0000:00:0e.2: reg 20 io port: [0xb000-0xb00f] [ 0.667571] pci 0000:00:0e.2: reg 24 32bit mmio: [0xcfffb000-0xcfffbfff] [ 0.667667] pci 0000:00:0f.1: reg 10 32bit mmio: [0xcfff0000-0xcfff3fff] [ 0.667702] pci 0000:00:0f.1: PME# supported from D3hot D3cold [ 0.667767] pci 0000:00:0f.1: PME# disabled [ 0.667875] pci 0000:00:11.0: reg 10 32bit mmio: [0xcfffa000-0xcfffafff] [ 0.667879] pci 0000:00:11.0: reg 14 io port: [0xac00-0xac07] [ 0.667884] pci 0000:00:11.0: reg 18 32bit mmio: [0xcfff9000-0xcfff90ff] [ 0.667888] pci 0000:00:11.0: reg 1c 32bit mmio: [0xcfff8000-0xcfff800f] [ 0.667920] pci 0000:00:11.0: supports D1 D2 [ 0.667922] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.667988] pci 0000:00:11.0: PME# disabled [ 0.668088] pci 0000:00:12.0: reg 10 32bit mmio: [0xcfff7000-0xcfff7fff] [ 0.668092] pci 0000:00:12.0: reg 14 io port: [0xa800-0xa807] [ 0.668097] pci 0000:00:12.0: reg 18 32bit mmio: [0xcfff6000-0xcfff60ff] [ 0.668101] pci 0000:00:12.0: reg 1c 32bit mmio: [0xcfff5000-0xcfff500f] [ 0.668133] pci 0000:00:12.0: supports D1 D2 [ 0.668135] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.668201] pci 0000:00:12.0: PME# disabled [ 0.668322] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.668387] pci 0000:00:13.0: PME# disabled [ 0.668520] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.668585] pci 0000:01:00.0: PME# disabled [ 0.668690] pci 0000:00:03.0: bridge io port: [0x9000-0x9fff] [ 0.668692] pci 0000:00:03.0: bridge 32bit mmio: [0xca000000-0xcdffffff] [ 0.668696] pci 0000:00:03.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.668744] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.668809] pci 0000:02:00.0: PME# disabled [ 0.668919] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold [ 0.668984] pci 0000:02:02.0: PME# disabled [ 0.669078] pci 0000:01:00.0: bridge io port: [0x9000-0x9fff] [ 0.669081] pci 0000:01:00.0: bridge 32bit mmio: [0xca000000-0xcdffffff] [ 0.669086] pci 0000:01:00.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.669122] pci 0000:03:00.0: reg 10 32bit mmio: [0xcc000000-0xccffffff] [ 0.669133] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.669143] pci 0000:03:00.0: reg 1c 64bit mmio: [0xca000000-0xcbffffff] [ 0.669149] pci 0000:03:00.0: reg 24 io port: [0x9c00-0x9c7f] [ 0.669155] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] [ 0.669229] pci 0000:02:00.0: bridge io port: [0x9000-0x9fff] [ 0.669232] pci 0000:02:00.0: bridge 32bit mmio: [0xca000000-0xcdffffff] [ 0.669237] pci 0000:02:00.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.669330] pci 0000:00:0f.0: transparent bridge [ 0.669394] pci 0000:00:0f.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.669451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.669753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.733232] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.733942] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.734649] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.735359] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.736069] ACPI: PCI Interrupt Link [LXV5] (IRQs 5 7 9 *10 11 14 15) [ 0.736672] ACPI: PCI Interrupt Link [LXV6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.737381] ACPI: PCI Interrupt Link [LXV7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.738090] ACPI: PCI Interrupt Link [LXV8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.738805] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 0.739410] ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15) [ 0.740044] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.740654] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.741259] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.741970] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) [ 0.742574] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.743286] ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 9 10 *11 14 15) [ 0.743889] ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 9 *10 11 14 15) [ 0.744497] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15) [ 0.745137] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.745582] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.746025] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.746467] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.746909] ACPI: PCI Interrupt Link [AXV5] (IRQs 16) *0 [ 0.747303] ACPI: PCI Interrupt Link [AXV6] (IRQs 16) *0, disabled. [ 0.747745] ACPI: PCI Interrupt Link [AXV7] (IRQs 16) *0, disabled. [ 0.748187] ACPI: PCI Interrupt Link [AXV8] (IRQs 16) *0, disabled. [ 0.748629] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0 [ 0.749165] ACPI: PCI Interrupt Link [AMA1] (IRQs 20 21 22 23) *0 [ 0.749701] ACPI: PCI Interrupt Link [AMAC] (IRQs 20 21 22 23) *0 [ 0.750251] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.750787] ACPI: PCI Interrupt Link [AACI] (IRQs 20 21 22 23) *0, disabled. [ 0.751371] ACPI: PCI Interrupt Link [AMCI] (IRQs 20 21 22 23) *0, disabled. [ 0.751956] ACPI: PCI Interrupt Link [ASMB] (IRQs 20 21 22 23) *0, disabled. [ 0.752540] ACPI: PCI Interrupt Link [AUS2] (IRQs 20 21 22 23) *0 [ 0.753079] ACPI: PCI Interrupt Link [AIDE] (IRQs 20 21 22 23) *0, disabled. [ 0.753666] ACPI: PCI Interrupt Link [ASA0] (IRQs 20 21 22 23) *0 [ 0.754204] ACPI: PCI Interrupt Link [ASA1] (IRQs 20 21 22 23) *0 [ 0.754741] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.755240] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.755314] vgaarb: loaded [ 0.755454] SCSI subsystem initialized [ 0.755539] libata version 3.00 loaded. [ 0.755539] usbcore: registered new interface driver usbfs [ 0.755539] usbcore: registered new interface driver hub [ 0.755539] usbcore: registered new device driver usb [ 0.755539] ACPI: WMI: Mapper loaded [ 0.755539] PCI: Using ACPI for IRQ routing [ 0.755539] pci 0000:00:0f.0: BAR 14: can't allocate resource [ 0.755539] NetLabel: Initializing [ 0.755539] NetLabel: domain hash size = 128 [ 0.755539] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.755539] NetLabel: unlabeled traffic allowed by default [ 0.755539] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.755539] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.770143] Switching to clocksource tsc [ 0.771830] AppArmor: AppArmor Filesystem Enabled [ 0.771914] pnp: PnP ACPI init [ 0.771992] ACPI: bus type pnp registered [ 0.775019] pnp: PnP ACPI: found 13 devices [ 0.775081] ACPI: ACPI bus type pnp unregistered [ 0.775151] system 00:00: ioport range 0x1000-0x107f has been reserved [ 0.775216] system 00:00: ioport range 0x1080-0x10ff has been reserved [ 0.775279] system 00:00: ioport range 0x1400-0x147f has been reserved [ 0.775343] system 00:00: ioport range 0x1480-0x14ff has been reserved [ 0.775406] system 00:00: ioport range 0x1800-0x187f has been reserved [ 0.775471] system 00:00: ioport range 0x1880-0x18ff has been reserved [ 0.775538] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.775601] system 00:02: ioport range 0x295-0x314 has been reserved [ 0.775664] system 00:02: ioport range 0x880-0x88f has been reserved [ 0.775734] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.775800] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved [ 0.775864] system 00:0c: iomem range 0xd5800-0xd7fff has been reserved [ 0.775928] system 00:0c: iomem range 0xf0000-0xfbfff could not be reserved [ 0.775993] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.776057] system 00:0c: iomem range 0xafef0000-0xafefffff could not be reserved [ 0.776131] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.776196] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.776260] system 00:0c: iomem range 0x100000-0xafeeffff could not be reserved [ 0.776333] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.776407] system 00:0c: iomem range 0xd0000000-0xdfffffff has been reserved [ 0.776471] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.776536] system 00:0c: iomem range 0xfeff0000-0xfeff0000 has been reserved [ 0.781366] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 [ 0.781430] pci 0000:02:00.0: IO window: 0x9000-0x9fff [ 0.781495] pci 0000:02:00.0: MEM window: 0xca000000-0xcdffffff [ 0.781560] pci 0000:02:00.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff [ 0.781636] pci 0000:02:02.0: PCI bridge, secondary bus 0000:04 [ 0.781698] pci 0000:02:02.0: IO window: disabled [ 0.781762] pci 0000:02:02.0: MEM window: disabled [ 0.781825] pci 0000:02:02.0: PREFETCH window: disabled [ 0.781891] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 0.781954] pci 0000:01:00.0: IO window: 0x9000-0x9fff [ 0.782018] pci 0000:01:00.0: MEM window: 0xca000000-0xcdffffff [ 0.782083] pci 0000:01:00.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff [ 0.782159] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 0.782222] pci 0000:00:03.0: IO window: 0x9000-0x9fff [ 0.782286] pci 0000:00:03.0: MEM window: 0xca000000-0xcdffffff [ 0.782349] pci 0000:00:03.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff [ 0.782424] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:05 [ 0.782487] pci 0000:00:0f.0: IO window: disabled [ 0.782550] pci 0000:00:0f.0: MEM window: disabled [ 0.782613] pci 0000:00:0f.0: PREFETCH window: disabled [ 0.782677] pci 0000:00:13.0: PCI bridge, secondary bus 0000:06 [ 0.782739] pci 0000:00:13.0: IO window: disabled [ 0.782802] pci 0000:00:13.0: MEM window: disabled [ 0.783783] pci 0000:00:13.0: PREFETCH window: disabled [ 0.783855] pci 0000:00:03.0: setting latency timer to 64 [ 0.783862] pci 0000:01:00.0: setting latency timer to 64 [ 0.783870] pci 0000:02:00.0: setting latency timer to 64 [ 0.783878] pci 0000:02:02.0: setting latency timer to 64 [ 0.783883] pci 0000:00:0f.0: setting latency timer to 64 [ 0.783889] pci 0000:00:13.0: setting latency timer to 64 [ 0.783893] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.783895] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.783897] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.783899] pci_bus 0000:01: resource 1 mem: [0xca000000-0xcdffffff] [ 0.783901] pci_bus 0000:01: resource 2 pref mem [0xb0000000-0xbfffffff] [ 0.783903] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff] [ 0.783904] pci_bus 0000:02: resource 1 mem: [0xca000000-0xcdffffff] [ 0.783906] pci_bus 0000:02: resource 2 pref mem [0xb0000000-0xbfffffff] [ 0.783908] pci_bus 0000:03: resource 0 io: [0x9000-0x9fff] [ 0.783910] pci_bus 0000:03: resource 1 mem: [0xca000000-0xcdffffff] [ 0.783911] pci_bus 0000:03: resource 2 pref mem [0xb0000000-0xbfffffff] [ 0.783914] pci_bus 0000:05: resource 1 mem: [0x0-0xfffff] [ 0.783915] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.783917] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.783953] NET: Registered protocol family 2 [ 0.784170] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.785503] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.790287] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.790925] TCP: Hash tables configured (established 524288 bind 65536) [ 0.790989] TCP reno registered [ 0.791197] NET: Registered protocol family 1 [ 0.809750] pci 0000:03:00.0: Boot video device [ 0.810078] Scanning for low memory corruption every 60 seconds [ 0.810264] audit: initializing netlink socket (disabled) [ 0.810334] type=2000 audit(1273495854.809:1): initialized [ 0.817970] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.819281] VFS: Disk quotas dquot_6.5.2 [ 0.819391] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.819977] fuse init (API version 7.13) [ 0.820109] msgmni has been set to 7904 [ 0.820484] alg: No test for stdrng (krng) [ 0.820612] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.820686] io scheduler noop registered [ 0.820748] io scheduler anticipatory registered [ 0.820809] io scheduler deadline registered [ 0.820894] io scheduler cfq registered (default) [ 0.821110] alloc irq_desc for 24 on node -1 [ 0.821112] alloc kstat_irqs on node -1 [ 0.821120] pcieport 0000:00:03.0: irq 24 for MSI/MSI-X [ 0.821126] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.821220] alloc irq_desc for 25 on node -1 [ 0.821221] alloc kstat_irqs on node -1 [ 0.821226] pcieport 0000:00:13.0: irq 25 for MSI/MSI-X [ 0.821232] pcieport 0000:00:13.0: setting latency timer to 64 [ 0.821311] Freeing initrd memory: 9303k freed [ 0.821463] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.821551] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.821764] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.821847] ACPI: Power Button [PWRB] [ 0.821981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.822059] ACPI: Power Button [PWRF] [ 0.823022] ACPI: SSDT 00000000afef8740 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.823569] processor LNXCPU:00: registered as cooling_device0 [ 0.823917] ACPI: SSDT 00000000afef8c00 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.824305] processor LNXCPU:01: registered as cooling_device1 [ 0.824596] ACPI: SSDT 00000000afef8d60 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.824972] processor LNXCPU:02: registered as cooling_device2 [ 0.825260] ACPI: SSDT 00000000afef8ec0 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.825641] processor LNXCPU:03: registered as cooling_device3 [ 0.829533] Linux agpgart interface v0.103 [ 0.829649] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.830725] brd: module loaded [ 0.831159] loop: module loaded [ 0.831281] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.831483] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 0.831728] ACPI: PCI Interrupt Link [ASA0] enabled at IRQ 23 [ 0.831792] alloc irq_desc for 23 on node -1 [ 0.831794] alloc kstat_irqs on node -1 [ 0.831799] pata_acpi 0000:00:0e.0: PCI INT A -> Link[ASA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.831884] pata_acpi 0000:00:0e.0: setting latency timer to 64 [ 0.831891] pata_acpi 0000:00:0e.0: PCI INT A disabled [ 0.832176] ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 22 [ 0.832239] alloc irq_desc for 22 on node -1 [ 0.832240] alloc kstat_irqs on node -1 [ 0.832244] pata_acpi 0000:00:0e.1: PCI INT B -> Link[ASA1] -> GSI 22 (level, low) -> IRQ 22 [ 0.832329] pata_acpi 0000:00:0e.1: setting latency timer to 64 [ 0.832335] pata_acpi 0000:00:0e.1: PCI INT B disabled [ 0.832619] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 0.832682] alloc irq_desc for 21 on node -1 [ 0.832684] alloc kstat_irqs on node -1 [ 0.832687] pata_acpi 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 0.832772] pata_acpi 0000:00:0e.2: setting latency timer to 64 [ 0.832779] pata_acpi 0000:00:0e.2: PCI INT C disabled [ 0.833072] Fixed MDIO Bus: probed [ 0.833156] PPP generic driver version 2.4.2 [ 0.833241] tun: Universal TUN/TAP device driver, 1.6 [ 0.833302] tun: (C) 1999-2004 Max Krasnyansky [ 0.833420] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.833715] ACPI: PCI Interrupt Link [AUS2] enabled at IRQ 20 [ 0.833778] alloc irq_desc for 20 on node -1 [ 0.833780] alloc kstat_irqs on node -1 [ 0.833783] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[AUS2] -> GSI 20 (level, low) -> IRQ 20 [ 0.833877] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 0.833880] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 0.833975] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 0.834068] ehci_hcd 0000:00:0b.1: debug port 1 [ 0.834135] ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported [ 0.834148] ehci_hcd 0000:00:0b.1: irq 20, io mem 0xcfffe000 [ 0.849384] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 0.849547] usb usb1: configuration #1 chosen from 1 choice [ 0.849667] hub 1-0:1.0: USB hub found [ 0.849763] hub 1-0:1.0: 10 ports detected [ 0.849869] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.850166] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23 [ 0.850230] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23 [ 0.850309] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 0.850311] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 0.850396] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.850486] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xcffff000 [ 0.911647] usb usb2: configuration #1 chosen from 1 choice [ 0.911730] hub 2-0:1.0: USB hub found [ 0.911796] hub 2-0:1.0: 10 ports detected [ 0.911902] uhci_hcd: USB Universal Host Controller Interface driver [ 0.912016] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.914762] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.914828] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.915005] mice: PS/2 mouse device common for all mice [ 0.915173] rtc_cmos 00:05: RTC can wake from S4 [ 0.915262] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.915352] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.915500] device-mapper: uevent: version 1.0.3 [ 0.915700] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.915974] device-mapper: multipath: version 1.1.0 loaded [ 0.916045] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.916508] cpuidle: using governor ladder [ 0.916582] cpuidle: using governor menu [ 0.916890] TCP cubic registered [ 0.917040] NET: Registered protocol family 10 [ 0.917437] lo: Disabled Privacy Extensions [ 0.917708] NET: Registered protocol family 17 [ 0.918491] PM: Resume from disk failed. [ 0.918500] registered taskstats version 1 [ 0.918981] Magic number: 10:802:834 [ 0.919109] rtc_cmos 00:05: setting system clock to 2010-05-10 12:50:55 UTC (1273495855) [ 0.919193] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.919255] EDD information not available. [ 0.919356] Freeing unused kernel memory: 876k freed [ 0.919661] Write protecting the kernel read-only data: 7680k [ 0.934051] udev: starting version 151 [ 0.941154] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.958453] pata_amd 0000:00:0d.0: version 0.4.1 [ 0.958523] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 0.969429] scsi0 : pata_amd [ 0.974604] scsi1 : pata_amd [ 0.975486] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xec00 irq 14 [ 0.975557] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xec08 irq 15 [ 0.975685] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.976084] ACPI: PCI Interrupt Link [AMAC] enabled at IRQ 22 [ 0.976160] forcedeth 0000:00:11.0: PCI INT A -> Link[AMAC] -> GSI 22 (level, low) -> IRQ 22 [ 0.976243] forcedeth 0000:00:11.0: setting latency timer to 64 [ 0.976331] nv_probe: set workaround bit for reversed mac addr [ 0.992636] Floppy drive(s): fd0 is 1.44M [ 1.014655] FDC 0 is a post-1991 82077 [ 1.053816] forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:1f:bc:07:bd:61 [ 1.053892] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.053982] sata_nv 0000:00:0e.0: version 3.5 [ 1.053993] sata_nv 0000:00:0e.0: PCI INT A -> Link[ASA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.054068] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 1.054365] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 1.054483] scsi2 : sata_nv [ 1.054649] scsi3 : sata_nv [ 1.054999] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 [ 1.055096] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 [ 1.055521] ACPI: PCI Interrupt Link [AMA1] enabled at IRQ 21 [ 1.055586] forcedeth 0000:00:12.0: PCI INT A -> Link[AMA1] -> GSI 21 (level, low) -> IRQ 21 [ 1.055661] forcedeth 0000:00:12.0: setting latency timer to 64 [ 1.055692] nv_probe: set workaround bit for reversed mac addr [ 1.131451] forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x732 @ 3, addr 00:1f:bc:07:bd:62 [ 1.131525] forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.131644] sata_nv 0000:00:0e.1: PCI INT B -> Link[ASA1] -> GSI 22 (level, low) -> IRQ 22 [ 1.131731] sata_nv 0000:00:0e.1: Using SWNCQ mode [ 1.131834] sata_nv 0000:00:0e.1: setting latency timer to 64 [ 1.131966] scsi4 : sata_nv [ 1.132122] scsi5 : sata_nv [ 1.132337] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 22 [ 1.132402] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 22 [ 1.132542] sata_nv 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 1.132668] sata_nv 0000:00:0e.2: Using SWNCQ mode [ 1.132756] sata_nv 0000:00:0e.2: setting latency timer to 64 [ 1.132884] scsi6 : sata_nv [ 1.133042] scsi7 : sata_nv [ 1.133244] ata7: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb000 irq 21 [ 1.133308] ata8: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xb008 irq 21 [ 1.150371] ata1.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33 [ 1.150449] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13) [ 1.172538] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.192845] ata1.00: configured for UDMA/33 [ 1.198867] scsi 0:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5 [ 1.206721] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.207716] Uniform CD-ROM driver Revision: 3.20 [ 1.207862] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.207940] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.208112] ata2: port disabled. ignoring. [ 1.320655] usb 1-1: configuration #1 chosen from 1 choice [ 1.320871] hub 1-1:1.0: USB hub found [ 1.321093] hub 1-1:1.0: 4 ports detected [ 1.450038] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 1.540075] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.560280] ata3.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133 [ 1.560377] ata3.00: 488397168 sectors, multi 16: LBA48 [ 1.580295] ata3.00: configured for UDMA/133 [ 1.580436] scsi 2:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5 [ 1.580657] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.580665] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.580703] sd 2:0:0:0: [sda] Write Protect is off [ 1.580705] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.580725] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.580847] sda: sda1 sda2 [ 1.587630] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.601150] usb 1-3: configuration #1 chosen from 1 choice [ 1.606260] Initializing USB Mass Storage driver... [ 1.606459] scsi8 : SCSI emulation for USB Mass Storage devices [ 1.606643] usb-storage: device found at 3 [ 1.606646] usb-storage: waiting for device to settle before scanning [ 1.606657] usbcore: registered new interface driver usb-storage [ 1.606733] USB Mass Storage support registered. [ 1.620132] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.620289] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.640414] ata7.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 [ 1.640477] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.641140] ata5.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 [ 1.641208] ata5.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.660477] ata7.00: configured for UDMA/133 [ 1.690999] ata5.00: configured for UDMA/133 [ 1.691330] usb 1-1.1: new full speed USB device using ehci_hcd and address 4 [ 1.810392] usb 1-1.1: configuration #1 chosen from 1 choice [ 1.810727] hub 1-1.1:1.0: USB hub found [ 1.811061] hub 1-1.1:1.0: 4 ports detected [ 1.900304] usb 1-1.2: new full speed USB device using ehci_hcd and address 5 [ 2.025618] usb 1-1.2: configuration #1 chosen from 1 choice [ 2.072578] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.093339] ata4.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 [ 2.093408] ata4.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.110287] usb 1-1.1.1: new low speed USB device using ehci_hcd and address 6 [ 2.140823] ata4.00: configured for UDMA/133 [ 2.140989] scsi 3:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 [ 2.141229] sd 3:0:0:0: [sdb] 293046768 512-byte logical blocks: (150 GB/139 GiB) [ 2.141240] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2.141337] scsi 4:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 [ 2.141434] sd 4:0:0:0: [sdc] 293046768 512-byte logical blocks: (150 GB/139 GiB) [ 2.141447] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 2.141471] sd 4:0:0:0: [sdc] Write Protect is off [ 2.141473] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.141498] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.141604] sdc: [ 2.141826] sd 3:0:0:0: [sdb] Write Protect is off [ 2.141943] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.141963] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.142151] sdb: sdb1 sdb2 [ 2.150761] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.153834] sdc1 sdc2 [ 2.164932] sd 4:0:0:0: [sdc] Attached SCSI disk [ 2.226520] usb 1-1.1.1: configuration #1 chosen from 1 choice [ 2.231200] usbcore: registered new interface driver hiddev [ 2.234762] input: Razer Razer Salmosa as /devices/pci0000:00/0000:00:0b.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 [ 2.234915] generic-usb 0003:1532:0012.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Salmosa] on usb-0000:00:0b.1-1.2/input0 [ 2.237342] input: Logitech Logitech Gaming Keyboard as /devices/pci0000:00/0000:00:0b.1/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input5 [ 2.237471] generic-usb 0003:046D:C221.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech Gaming Keyboard] on usb-0000:00:0b.1-1.1.1/input0 [ 2.242587] input: Logitech Logitech Gaming Keyboard as /devices/pci0000:00/0000:00:0b.1/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/input/input6 [ 2.242797] generic-usb 0003:046D:C221.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [Logitech Logitech Gaming Keyboard] on usb-0000:00:0b.1-1.1.1/input1 [ 2.242906] usbcore: registered new interface driver usbhid [ 2.242970] usbhid: v2.6:USB HID core driver [ 2.282660] kjournald starting. Commit interval 5 seconds [ 2.282734] EXT3-fs: mounted filesystem with ordered data mode. [ 2.310284] usb 1-1.1.4: new full speed USB device using ehci_hcd and address 7 [ 2.425483] usb 1-1.1.4: configuration #1 chosen from 1 choice [ 2.428012] input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:0b.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input7 [ 2.428194] generic-usb 0003:046D:C222.0004: input,hiddev97,hidraw3: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:0b.1-1.1.4/input0 [ 2.630231] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.650265] ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 [ 2.650363] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.672695] ata6.00: configured for UDMA/133 [ 2.672859] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 2.673058] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.673093] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 2.673212] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 2.673321] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 2.673327] sd 6:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.673354] sd 5:0:0:0: [sdd] Write Protect is off [ 2.673357] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.673373] sd 6:0:0:0: [sde] Write Protect is off [ 2.673375] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 2.673380] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.673397] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.673556] sdd: [ 2.673630] sde: sdd1 sdd2 sdd3 [ 2.701782] sd 5:0:0:0: [sdd] Attached SCSI disk [ 2.701954] sde1 sde2 [ 2.720207] sd 6:0:0:0: [sde] Attached SCSI disk [ 3.163545] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.190283] ata8.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 [ 3.190356] ata8.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.206486] ata8.00: configured for UDMA/133 [ 3.206633] scsi 7:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 3.206827] sd 7:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.206834] sd 7:0:0:0: Attached scsi generic sg6 type 0 [ 3.207011] sd 7:0:0:0: [sdf] Write Protect is off [ 3.207073] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 3.207093] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.207298] sdf: sdf1 sdf2 [ 3.214321] sd 7:0:0:0: [sdf] Attached SCSI disk [ 6.600213] usb-storage: device scan complete [ 6.642763] scsi 8:0:0:0: Direct-Access Samsung STORY Station PQ: 0 ANSI: 2 CCS [ 6.643240] sd 8:0:0:0: Attached scsi generic sg7 type 0 [ 6.644504] sd 8:0:0:0: [sdg] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 6.646997] sd 8:0:0:0: [sdg] Write Protect is off [ 6.647063] sd 8:0:0:0: [sdg] Mode Sense: 28 00 00 00 [ 6.647066] sd 8:0:0:0: [sdg] Assuming drive cache: write through [ 6.649997] sd 8:0:0:0: [sdg] Assuming drive cache: write through [ 6.650064] sdg: sdg1 [ 6.653997] sd 8:0:0:0: [sdg] Assuming drive cache: write through [ 6.654064] sd 8:0:0:0: [sdg] Attached SCSI disk [ 28.214278] udev: starting version 151 [ 28.267621] udev: renamed network interface eth1 to eth3 [ 28.268913] udev: renamed network interface eth0 to eth2 [ 28.275729] i2c i2c-0: nForce2 SMBus adapter at 0xf400 [ 28.275755] i2c i2c-1: nForce2 SMBus adapter at 0xf000 [ 28.278633] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 28.334918] type=1505 audit(1273521082.912:2): operation="profile_load" pid=652 name="/sbin/dhclient3" [ 28.335454] type=1505 audit(1273521082.912:3): operation="profile_load" pid=652 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 28.335753] type=1505 audit(1273521082.912:4): operation="profile_load" pid=652 name="/usr/lib/connman/scripts/dhclient-script" [ 28.341448] lp: driver loaded but no devices found [ 28.351033] type=1505 audit(1273521082.922:5): operation="profile_load" pid=720 name="/usr/sbin/ntpd" [ 28.524926] Adding 4345572k swap on /dev/sdc2. Priority:4 extents:1 across:4345572k [ 28.576765] Adding 6305504k swap on /dev/sdd1. Priority:6 extents:1 across:6305504k [ 29.004915] EXT3 FS on sdb1, internal journal [ 29.011273] nvidia: module license 'NVIDIA' taints kernel. [ 29.011277] Disabling lock debugging due to kernel taint [ 29.182813] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 29.182817] HDA Intel 0000:00:0f.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20 [ 29.182820] hda_intel: Disable MSI for Nvidia chipset [ 29.182900] HDA Intel 0000:00:0f.1: setting latency timer to 64 [ 29.233740] input: ImExPS/2 Logitech MX Mouse as /devices/platform/i8042/serio1/input/input8 [ 29.387058] ACPI: PCI Interrupt Link [AXV5] enabled at IRQ 16 [ 29.387063] alloc irq_desc for 16 on node -1 [ 29.387064] alloc kstat_irqs on node -1 [ 29.387070] nvidia 0000:03:00.0: PCI INT A -> Link[AXV5] -> GSI 16 (level, low) -> IRQ 16 [ 29.387076] nvidia 0000:03:00.0: setting latency timer to 64 [ 29.387272] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.22 Wed Nov 11 05:08:25 PST 2009 [ 30.151812] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended [ 30.198673] type=1505 audit(1273521084.773:6): operation="profile_load" pid=1076 name="/usr/share/gdm/guest-session/Xsession" [ 30.200046] type=1505 audit(1273521084.773:7): operation="profile_replace" pid=1077 name="/sbin/dhclient3" [ 30.200564] type=1505 audit(1273521084.773:8): operation="profile_replace" pid=1077 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 30.200854] type=1505 audit(1273521084.773:9): operation="profile_replace" pid=1077 name="/usr/lib/connman/scripts/dhclient-script" [ 30.203158] type=1505 audit(1273521084.783:10): operation="profile_load" pid=1078 name="/usr/bin/evince" [ 30.209655] type=1505 audit(1273521084.783:11): operation="profile_load" pid=1078 name="/usr/bin/evince-previewer" [ 30.309432] alloc irq_desc for 26 on node -1 [ 30.309434] alloc kstat_irqs on node -1 [ 30.309443] forcedeth 0000:00:11.0: irq 26 for MSI/MSI-X [ 30.309633] eth2: no link during initialization. [ 30.310263] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 30.353589] alloc irq_desc for 27 on node -1 [ 30.353592] alloc kstat_irqs on node -1 [ 30.353600] forcedeth 0000:00:12.0: irq 27 for MSI/MSI-X [ 30.521577] hda_codec: ALC1200: BIOS auto-probing.