[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-40-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #87-Ubuntu SMP Mon Mar 5 20:26:31 UTC 2012 (Ubuntu 2.6.32-40.87-generic 2.6.32.57+drm33.23) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004ff70000 (usable) [ 0.000000] BIOS-e820: 000000004ff70000 - 000000004ff7f000 (ACPI data) [ 0.000000] BIOS-e820: 000000004ff7f000 - 000000004ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x4ff70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-D3FFF write-back [ 0.000000] D4000-D4FFF write-protect [ 0.000000] D5000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFF0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000004ff70000 (usable) [ 0.000000] modified: 000000004ff70000 - 000000004ff7f000 (ACPI data) [ 0.000000] modified: 000000004ff7f000 - 000000004ff80000 (ACPI NVS) [ 0.000000] modified: 000000004ff80000 - 0000000050000000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 3784f000 - 37fefc8a [ 0.000000] Allocated new RAMDISK: 008e8000 - 01088c8a [ 0.000000] Move RAMDISK from 000000003784f000 - 0000000037fefc89 to 008e8000 - 01088c89 [ 0.000000] ACPI: RSDP 000f7260 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 4ff7a87e 00034 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 4ff7ee13 00074 (v01 NVIDIA CK8 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 4ff7a8b2 04561 (v01 NVIDIA CK8 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 4ff7ffc0 00040 [ 0.000000] ACPI: APIC 4ff7ee87 0005A (v01 NVIDIA NV_APIC_ 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 4ff7eee1 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 4ff7ef09 000F7 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 391MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e3f18] TEXT DATA BSS ==> [0000100000 - 00008e3f18] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008e4000 - 00008e7138] BRK ==> [00008e4000 - 00008e7138] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e8000 - 0001088c8a] NEW RAMDISK ==> [00008e8000 - 0001088c8a] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0004ff70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0004ff70 [ 0.000000] On node 0 totalpages: 327435 [ 0.000000] free_area_init_node: node 0, pgdat c079ea00, node_mem_map c108a000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 783 pages used for memmap [ 0.000000] HighMem zone: 99427 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:aff80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 324876 [ 0.000000] Kernel command line: root=UUID=05e7f2d7-3972-4aa3-98e6-b0a770169083 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 6550720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0004ff70) [ 0.000000] Memory: 1275360k/1310144k available (4697k kernel code, 33452k reserved, 2122k data, 664k init, 400840k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a9000 - 0xc084f000 ( 664 kB) [ 0.000000] .data : 0xc05966f7 - 0xc07a8fc8 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc05966f7 (4697 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 797.947 MHz processor. [ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 1595.89 BogoMIPS (lpj=3191788) [ 0.008052] Security Framework initialized [ 0.008105] AppArmor: AppArmor initialized [ 0.008122] Mount-cache hash table entries: 512 [ 0.008373] Initializing cgroup subsys ns [ 0.008382] Initializing cgroup subsys cpuacct [ 0.008392] Initializing cgroup subsys memory [ 0.008409] Initializing cgroup subsys devices [ 0.008415] Initializing cgroup subsys freezer [ 0.008421] Initializing cgroup subsys net_cls [ 0.008460] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008467] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.008476] mce: CPU supports 5 MCE banks [ 0.008512] Performance Events: AMD PMU driver. [ 0.008526] ... version: 0 [ 0.008531] ... bit width: 48 [ 0.008536] ... generic registers: 4 [ 0.008541] ... value mask: 0000ffffffffffff [ 0.008547] ... max period: 00007fffffffffff [ 0.008552] ... fixed-purpose events: 0 [ 0.008557] ... event mask: 000000000000000f [ 0.008566] Checking 'hlt' instruction... OK. [ 0.025613] SMP alternatives: switching to UP code [ 0.040109] Freeing SMP alternatives: 19k freed [ 0.040141] ACPI: Core revision 20090903 [ 0.052017] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.052029] ftrace: allocating 21829 entries in 43 pages [ 0.060181] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.060575] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.101660] CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 0a [ 0.104001] Brought up 1 CPUs [ 0.104001] Total of 1 processors activated (1595.89 BogoMIPS). [ 0.104001] CPU0 attaching NULL sched-domain. [ 0.104001] devtmpfs: initialized [ 0.104001] regulator: core version 0.5 [ 0.104001] Time: 21:42:47 Date: 04/24/12 [ 0.104001] NET: Registered protocol family 16 [ 0.104001] EISA bus registered [ 0.104001] ACPI: bus type pci registered [ 0.104001] PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=2 [ 0.104001] PCI: Using configuration type 1 for base access [ 0.105276] bio: create slab at 0 [ 0.106798] ACPI: EC: Look up EC in DSDT [ 0.110577] ACPI: Interpreter enabled [ 0.110585] ACPI: (supports S0 S3 S4 S5) [ 0.110628] ACPI: Using IOAPIC for interrupt routing [ 0.168806] ACPI: EC: GPE = 0x21, I/O: command/status = 0x66, data = 0x62 [ 0.169164] ACPI: No dock devices found. [ 0.169345] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.169431] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.169576] pci 0000:00:01.1: reg 20 io port: [0x2040-0x207f] [ 0.169586] pci 0000:00:01.1: reg 24 io port: [0x2000-0x203f] [ 0.169613] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.169621] pci 0000:00:01.1: PME# disabled [ 0.169658] pci 0000:00:02.0: reg 10 32bit mmio: [0xe0000000-0xe0000fff] [ 0.169697] pci 0000:00:02.0: supports D1 D2 [ 0.169703] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.169710] pci 0000:00:02.0: PME# disabled [ 0.169740] pci 0000:00:02.1: reg 10 32bit mmio: [0xe0001000-0xe0001fff] [ 0.169780] pci 0000:00:02.1: supports D1 D2 [ 0.169785] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.169792] pci 0000:00:02.1: PME# disabled [ 0.169823] pci 0000:00:02.2: reg 10 32bit mmio: [0xe0004000-0xe00040ff] [ 0.169864] pci 0000:00:02.2: supports D1 D2 [ 0.169869] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.169877] pci 0000:00:02.2: PME# disabled [ 0.169919] pci 0000:00:06.0: reg 10 io port: [0x1400-0x14ff] [ 0.169928] pci 0000:00:06.0: reg 14 io port: [0x1c00-0x1c7f] [ 0.169938] pci 0000:00:06.0: reg 18 32bit mmio: [0xe0002000-0xe0002fff] [ 0.169972] pci 0000:00:06.0: supports D1 D2 [ 0.170002] pci 0000:00:06.1: reg 10 io port: [0x1800-0x18ff] [ 0.170011] pci 0000:00:06.1: reg 14 io port: [0x1c80-0x1cff] [ 0.170021] pci 0000:00:06.1: reg 18 32bit mmio: [0xe0003000-0xe0003fff] [ 0.170055] pci 0000:00:06.1: PME# supported from D3cold [ 0.170062] pci 0000:00:06.1: PME# disabled [ 0.170109] pci 0000:00:08.0: reg 20 io port: [0x2080-0x208f] [ 0.170379] pci 0000:02:00.0: reg 10 32bit mmio: [0xe0106000-0xe01067ff] [ 0.170390] pci 0000:02:00.0: reg 14 32bit mmio: [0xe0100000-0xe0103fff] [ 0.170441] pci 0000:02:00.0: supports D1 D2 [ 0.170447] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 0.170454] pci 0000:02:00.0: PME# disabled [ 0.170492] pci 0000:02:01.0: reg 10 io port: [0x7000-0x70ff] [ 0.170503] pci 0000:02:01.0: reg 14 32bit mmio: [0xe0106800-0xe01068ff] [ 0.170552] pci 0000:02:01.0: supports D1 D2 [ 0.170558] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold [ 0.170565] pci 0000:02:01.0: PME# disabled [ 0.170606] pci 0000:02:04.0: reg 10 32bit mmio: [0xe0104000-0xe0104fff] [ 0.170637] pci 0000:02:04.0: supports D1 D2 [ 0.170643] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.170650] pci 0000:02:04.0: PME# disabled [ 0.170689] pci 0000:02:04.1: reg 10 32bit mmio: [0xe0105000-0xe0105fff] [ 0.170719] pci 0000:02:04.1: supports D1 D2 [ 0.170725] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.170733] pci 0000:02:04.1: PME# disabled [ 0.170768] pci 0000:02:04.2: reg 10 io port: [0x7400-0x743f] [ 0.170863] pci 0000:00:0a.0: bridge io port: [0x3000-0x7fff] [ 0.170871] pci 0000:00:0a.0: bridge 32bit mmio: [0xe0100000-0xe17fffff] [ 0.170959] pci 0000:01:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff] [ 0.170971] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.170983] pci 0000:01:00.0: reg 18 32bit mmio pref: [0xf8000000-0xf807ffff] [ 0.171009] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.171102] pci 0000:00:0b.0: bridge 32bit mmio: [0xe2000000-0xe2ffffff] [ 0.171111] pci 0000:00:0b.0: bridge 32bit mmio pref: [0xf0000000-0xf80fffff] [ 0.171127] pci_bus 0000:00: on NUMA node 0 [ 0.171135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.171306] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.171386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT] [ 0.196443] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0 [ 0.196759] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0 [ 0.197070] ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0, disabled. [ 0.197379] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled. [ 0.197691] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0 [ 0.197993] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0 [ 0.198296] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0 [ 0.198599] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0 [ 0.198902] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0 [ 0.199205] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled. [ 0.199509] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0 [ 0.199817] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0 [ 0.200134] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled. [ 0.200452] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled. [ 0.200665] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.200671] vgaarb: loaded [ 0.200917] SCSI subsystem initialized [ 0.201002] libata version 3.00 loaded. [ 0.201164] usbcore: registered new interface driver usbfs [ 0.201193] usbcore: registered new interface driver hub [ 0.201249] usbcore: registered new device driver usb [ 0.201542] ACPI: WMI: Mapper loaded [ 0.201546] PCI: Using ACPI for IRQ routing [ 0.201830] NetLabel: Initializing [ 0.201834] NetLabel: domain hash size = 128 [ 0.201839] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.201867] NetLabel: unlabeled traffic allowed by default [ 0.201975] Switching to clocksource tsc [ 0.204000] AppArmor: AppArmor Filesystem Enabled [ 0.204000] pnp: PnP ACPI init [ 0.204000] ACPI: bus type pnp registered [ 0.230324] pnp: PnP ACPI: found 12 devices [ 0.230330] ACPI: ACPI bus type pnp unregistered [ 0.230338] PnPBIOS: Disabled by ACPI PNP [ 0.230362] system 00:01: ioport range 0x8000-0x807f has been reserved [ 0.230371] system 00:01: ioport range 0x8080-0x80ff has been reserved [ 0.230379] system 00:01: ioport range 0x8400-0x847f has been reserved [ 0.230387] system 00:01: ioport range 0x8480-0x84ff has been reserved [ 0.230395] system 00:01: ioport range 0x8800-0x887f has been reserved [ 0.230404] system 00:01: ioport range 0x8880-0x88ff has been reserved [ 0.230412] system 00:01: ioport range 0x2040-0x207f has been reserved [ 0.230420] system 00:01: ioport range 0x2000-0x203f has been reserved [ 0.230436] system 00:02: iomem range 0xfff80000-0xffffffff has been reserved [ 0.230445] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.230454] system 00:02: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.230462] system 00:02: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.230478] system 00:03: ioport range 0x200-0x20f has been reserved [ 0.230486] system 00:03: ioport range 0x680-0x6ff has been reserved [ 0.230494] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.230503] system 00:03: ioport range 0xfe00-0xfe01 has been reserved [ 0.265443] pci 0000:02:04.0: BAR 16: can't allocate mem resource [0xe4000000-0xe17fffff] [ 0.265453] pci 0000:02:04.1: BAR 16: can't allocate mem resource [0xe4000000-0xe17fffff] [ 0.265463] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03 [ 0.265470] pci 0000:02:04.0: IO window: 0x003000-0x0030ff [ 0.265479] pci 0000:02:04.0: IO window: 0x003400-0x0034ff [ 0.265488] pci 0000:02:04.0: PREFETCH window: 0x50000000-0x53ffffff [ 0.265496] pci 0000:02:04.1: CardBus bridge, secondary bus 0000:07 [ 0.265503] pci 0000:02:04.1: IO window: 0x003800-0x0038ff [ 0.265510] pci 0000:02:04.1: IO window: 0x003c00-0x003cff [ 0.265519] pci 0000:02:04.1: PREFETCH window: 0x54000000-0x57ffffff [ 0.265527] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.265534] pci 0000:00:0a.0: IO window: 0x3000-0x7fff [ 0.265542] pci 0000:00:0a.0: MEM window: 0xe0100000-0xe17fffff [ 0.265550] pci 0000:00:0a.0: PREFETCH window: 0x50000000-0x57ffffff [ 0.265562] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01 [ 0.265567] pci 0000:00:0b.0: IO window: disabled [ 0.265577] pci 0000:00:0b.0: MEM window: 0xe2000000-0xe2ffffff [ 0.265585] pci 0000:00:0b.0: PREFETCH window: 0xf0000000-0xf80fffff [ 0.265605] pci 0000:00:0a.0: setting latency timer to 64 [ 0.266085] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19 [ 0.266093] alloc irq_desc for 19 on node -1 [ 0.266099] alloc kstat_irqs on node -1 [ 0.266113] pci 0000:02:04.0: PCI INT A -> Link[LNK1] -> GSI 19 (level, low) -> IRQ 19 [ 0.266567] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18 [ 0.266573] alloc irq_desc for 18 on node -1 [ 0.266578] alloc kstat_irqs on node -1 [ 0.266590] pci 0000:02:04.1: PCI INT B -> Link[LNK2] -> GSI 18 (level, low) -> IRQ 18 [ 0.266609] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.266616] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.266624] pci_bus 0000:02: resource 0 io: [0x3000-0x7fff] [ 0.266631] pci_bus 0000:02: resource 1 mem: [0xe0100000-0xe17fffff] [ 0.266638] pci_bus 0000:02: resource 2 pref mem [0x50000000-0x57ffffff] [ 0.266646] pci_bus 0000:03: resource 0 io: [0x3000-0x30ff] [ 0.266652] pci_bus 0000:03: resource 1 io: [0x3400-0x34ff] [ 0.266660] pci_bus 0000:03: resource 2 pref mem [0x50000000-0x53ffffff] [ 0.266667] pci_bus 0000:07: resource 0 io: [0x3800-0x38ff] [ 0.266674] pci_bus 0000:07: resource 1 io: [0x3c00-0x3cff] [ 0.266681] pci_bus 0000:07: resource 2 pref mem [0x54000000-0x57ffffff] [ 0.266689] pci_bus 0000:01: resource 1 mem: [0xe2000000-0xe2ffffff] [ 0.266696] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf80fffff] [ 0.266773] NET: Registered protocol family 2 [ 0.266973] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.267771] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.269199] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.270019] TCP: Hash tables configured (established 131072 bind 65536) [ 0.270025] TCP reno registered [ 0.270198] NET: Registered protocol family 1 [ 1.070008] pci 0000:00:02.0: OHCI: BIOS handoff failed (BIOS bug?) 00000797 [ 1.928013] pci 0000:00:02.1: OHCI: BIOS handoff failed (BIOS bug?) 00000797 [ 1.984088] pci 0000:01:00.0: Boot video device [ 1.984216] Simple Boot Flag at 0x37 set to 0x1 [ 1.984447] cpufreq-nforce2: No nForce2 chipset. [ 1.984506] Scanning for low memory corruption every 60 seconds [ 1.984767] audit: initializing netlink socket (disabled) [ 1.984794] type=2000 audit(1335303768.984:1): initialized [ 2.010114] Trying to unpack rootfs image as initramfs... [ 2.036816] highmem bounce pool size: 64 pages [ 2.036831] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.043662] VFS: Disk quotas dquot_6.5.2 [ 2.043792] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.045126] fuse init (API version 7.13) [ 2.045327] msgmni has been set to 1709 [ 2.048623] alg: No test for stdrng (krng) [ 2.048754] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.048762] io scheduler noop registered [ 2.048767] io scheduler anticipatory registered [ 2.048772] io scheduler deadline registered [ 2.048872] io scheduler cfq registered (default) [ 2.049115] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.049167] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.050565] ACPI: AC Adapter [ACAD] (on-line) [ 2.050707] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.050717] ACPI: Power Button [PWRB] [ 2.050820] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 2.052143] ACPI: Lid Switch [LID] [ 2.052275] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.052283] ACPI: Power Button [PWRF] [ 2.052656] Marking TSC unstable due to TSC halts in idle [ 2.052725] processor LNXCPU:00: registered as cooling_device0 [ 2.060564] Switching to clocksource acpi_pm [ 2.087469] ACPI: Invalid active0 threshold [ 2.090930] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.090950] ACPI: Thermal Zone [THRM] (31 C) [ 2.096412] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.097507] ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 22 [ 2.097518] alloc irq_desc for 22 on node -1 [ 2.097523] alloc kstat_irqs on node -1 [ 2.097540] serial 0000:00:06.1: PCI INT B -> Link[LMCI] -> GSI 22 (level, low) -> IRQ 22 [ 2.097552] serial 0000:00:06.1: PCI INT B disabled [ 2.099775] brd: module loaded [ 2.100214] isapnp: Scanning for PnP cards... [ 2.109340] loop: module loaded [ 2.109534] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 2.109870] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 2.110610] Fixed MDIO Bus: probed [ 2.110689] PPP generic driver version 2.4.2 [ 2.110771] tun: Universal TUN/TAP device driver, 1.6 [ 2.110776] tun: (C) 1999-2004 Max Krasnyansky [ 2.110942] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.111412] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21 [ 2.111421] alloc irq_desc for 21 on node -1 [ 2.111426] alloc kstat_irqs on node -1 [ 2.111440] ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 21 (level, low) -> IRQ 21 [ 2.111469] ehci_hcd 0000:00:02.2: setting latency timer to 64 [ 2.111476] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 2.111552] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 2.111615] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported [ 2.111646] ehci_hcd 0000:00:02.2: irq 21, io mem 0xe0004000 [ 2.160206] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 2.160392] usb usb1: configuration #1 chosen from 1 choice [ 2.160462] hub 1-0:1.0: USB hub found [ 2.160481] hub 1-0:1.0: 6 ports detected [ 2.160591] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.161052] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20 [ 2.161060] alloc irq_desc for 20 on node -1 [ 2.161065] alloc kstat_irqs on node -1 [ 2.161078] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20 [ 2.161097] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 2.161103] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.161179] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.161217] ohci_hcd 0000:00:02.0: irq 20, io mem 0xe0000000 [ 2.249901] usb usb2: configuration #1 chosen from 1 choice [ 2.249974] hub 2-0:1.0: USB hub found [ 2.249995] hub 2-0:1.0: 3 ports detected [ 2.250594] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 22 [ 2.250606] ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 22 (level, low) -> IRQ 22 [ 2.250636] ohci_hcd 0000:00:02.1: setting latency timer to 64 [ 2.250643] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 2.250735] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 2.250783] ohci_hcd 0000:00:02.1: irq 22, io mem 0xe0001000 [ 2.339397] usb usb3: configuration #1 chosen from 1 choice [ 2.339468] hub 3-0:1.0: USB hub found [ 2.339490] hub 3-0:1.0: 3 ports detected [ 2.339603] uhci_hcd: USB Universal Host Controller Interface driver [ 2.339779] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.347357] i8042.c: Detected active multiplexing controller, rev 1.1. [ 2.372451] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.372467] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.372530] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.372586] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.372636] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.372924] mice: PS/2 mouse device common for all mice [ 2.373238] rtc_cmos 00:06: RTC can wake from S4 [ 2.373324] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 2.373358] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 2.373620] device-mapper: uevent: version 1.0.3 [ 2.375971] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.378638] device-mapper: multipath: version 1.1.0 loaded [ 2.378645] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.378920] EISA: Probing bus 0 at eisa.0 [ 2.378932] Cannot allocate resource for EISA slot 1 [ 2.378937] Cannot allocate resource for EISA slot 2 [ 2.378943] Cannot allocate resource for EISA slot 3 [ 2.378948] Cannot allocate resource for EISA slot 4 [ 2.378953] Cannot allocate resource for EISA slot 5 [ 2.378959] Cannot allocate resource for EISA slot 6 [ 2.378964] Cannot allocate resource for EISA slot 7 [ 2.378969] Cannot allocate resource for EISA slot 8 [ 2.378975] EISA: Detected 0 cards. [ 2.380925] cpuidle: using governor ladder [ 2.381031] cpuidle: using governor menu [ 2.382083] TCP cubic registered [ 2.382467] NET: Registered protocol family 10 [ 2.385493] NET: Registered protocol family 17 [ 2.385553] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors (1 cpu cores) (version 2.20.00) [ 2.388882] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 [ 2.388889] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa [ 2.388896] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 [ 2.398135] Using IPI No-Shortcut mode [ 2.398238] PM: Resume from disk failed. [ 2.398250] registered taskstats version 1 [ 2.398473] Magic number: 8:703:753 [ 2.398564] rtc_cmos 00:06: setting system clock to 2012-04-24 21:42:49 UTC (1335303769) [ 2.398567] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.398568] EDD information not available. [ 2.403580] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.504143] ACPI: Battery Slot [BAT1] (battery present) [ 2.671020] Freeing initrd memory: 7811k freed [ 2.766959] isapnp: No Plug & Play device found [ 2.766977] Freeing unused kernel memory: 664k freed [ 2.767983] Write protecting the kernel text: 4700k [ 2.768028] Write protecting the kernel read-only data: 1844k [ 2.785177] udev: starting version 151 [ 2.966116] pata_amd 0000:00:08.0: version 0.4.1 [ 2.966179] pata_amd 0000:00:08.0: setting latency timer to 64 [ 2.988596] scsi0 : pata_amd [ 2.999271] scsi1 : pata_amd [ 2.999886] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2080 irq 14 [ 2.999890] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2088 irq 15 [ 3.164388] ata1.00: ATA-6: TOSHIBA MK8025GAS, KA024A, max UDMA/100 [ 3.164392] ata1.00: 156301488 sectors, multi 16: LBA [ 3.164416] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13) [ 3.172327] ata1.00: configured for UDMA/100 [ 3.172440] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8025GA KA02 PQ: 0 ANSI: 5 [ 3.172585] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.172859] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.172900] sd 0:0:0:0: [sda] Write Protect is off [ 3.172903] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.172924] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.173040] sda: sda1 < sda5 sda6 sda7 > sda2 [ 3.293984] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.336284] ata2.00: ATAPI: HL-DT-ST DVD-RW GWA-4080N, 0C09, max MWDMA2 [ 3.336307] ata2: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc6000000) ACPI=0x39f (120:600:0x12) [ 3.352238] ata2.00: configured for MWDMA2 [ 3.357930] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4080N 0C09 PQ: 0 ANSI: 5 [ 3.369719] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 3.369722] Uniform CD-ROM driver Revision: 3.20 [ 3.369787] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.369828] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.377925] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.377951] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 3.380795] ohci1394 0000:02:00.0: PCI INT A -> Link[LNK1] -> GSI 19 (level, low) -> IRQ 19 [ 3.382846] 8139too Fast Ethernet driver 0.9.28 [ 3.436071] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0106000-e01067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.436249] 8139too 0000:02:01.0: PCI INT A -> Link[LNK2] -> GSI 18 (level, low) -> IRQ 18 [ 3.437124] eth0: RealTek RTL8139 at 0x7000, 00:0f:b0:47:07:a7, IRQ 18 [ 4.024356] kjournald starting. Commit interval 5 seconds [ 4.024367] EXT3-fs: mounted filesystem with ordered data mode. [ 4.708143] ieee1394: Host added: ID:BUS[0-00:1023] GUID[413f0200413f0200] [ 6.016044] floppy0: no floppy controllers found [ 28.915571] Adding 1341388k swap on /dev/sda7. Priority:-1 extents:1 across:1341388k [ 28.945181] udev: starting version 151 [ 29.533645] type=1505 audit(1335300196.633:2): operation="profile_load" pid=550 name="/sbin/dhclient3" [ 29.533933] type=1505 audit(1335300196.633:3): operation="profile_load" pid=550 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 29.534095] type=1505 audit(1335300196.633:4): operation="profile_load" pid=550 name="/usr/lib/connman/scripts/dhclient-script" [ 29.536635] type=1505 audit(1335300196.637:5): operation="profile_load" pid=557 name="/usr/sbin/ntpd" [ 29.554945] parport_pc 00:0b: reported by Plug and Play ACPI [ 29.554995] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 29.760804] EXT3 FS on sda6, internal journal [ 29.894695] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:17/LNXVIDEO:00/input/input5 [ 29.894824] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 30.057870] Linux agpgart interface v0.103 [ 30.061029] i2c i2c-0: nForce2 SMBus adapter at 0x2040 [ 30.061047] i2c i2c-1: nForce2 SMBus adapter at 0x2000 [ 30.196386] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00d1] [ 30.196395] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB [ 30.196401] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP [ 30.201501] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 30.208428] lp0: using parport0 (interrupt-driven). [ 30.220747] ppdev: user-space parallel port driver [ 30.289919] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 30.815264] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6 [ 30.836130] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7 [ 31.142593] [drm] Initialized drm 1.1.0 20060810 [ 31.166391] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:006d] [ 31.166410] yenta_cardbus 0000:02:04.0: CardBus bridge, secondary bus 0000:03 [ 31.166413] yenta_cardbus 0000:02:04.0: IO window: 0x003000-0x0030ff [ 31.166417] yenta_cardbus 0000:02:04.0: IO window: 0x003400-0x0034ff [ 31.166421] yenta_cardbus 0000:02:04.0: PREFETCH window: 0x50000000-0x53ffffff [ 31.166425] yenta_cardbus 0000:02:04.0: MEM window: 0xe0400000-0xe07fffff [ 31.166430] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions [ 31.166434] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI [ 31.166436] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI [ 31.166441] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01111d22, devctl 0x64 [ 31.396576] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0c38, PCI irq 19 [ 31.396581] yenta_cardbus 0000:02:04.0: Socket status: 30000020 [ 31.396585] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 31.396596] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 31.396600] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: clean. [ 31.397360] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff [ 31.397363] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff [ 31.397713] yenta_cardbus 0000:02:04.1: CardBus bridge found [103c:006d] [ 31.397728] yenta_cardbus 0000:02:04.1: Using CSCINT to route CSC interrupts to PCI [ 31.397730] yenta_cardbus 0000:02:04.1: Routing CardBus interrupts to PCI [ 31.397734] yenta_cardbus 0000:02:04.1: TI: mfunc 0x01111d22, devctl 0x64 [ 31.577367] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 31.577377] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 31.577622] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16 [ 31.577628] alloc irq_desc for 16 on node -1 [ 31.577630] alloc kstat_irqs on node -1 [ 31.577640] nouveau 0000:01:00.0: PCI INT A -> Link[LNK5] -> GSI 16 (level, low) -> IRQ 16 [ 31.581054] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [ 31.581314] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x017900a5) [ 31.581358] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 31.581364] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 31.581366] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 31.646306] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 31.646503] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 31.646505] [drm] nouveau 0000:01:00.0: BMP version 5.41 [ 31.646508] [drm] nouveau 0000:01:00.0: Bios version 04.17.20.49 [ 31.646512] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [ 31.646516] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000100 000088b8 [ 31.646520] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 03010223 00000004 [ 31.646522] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 020203f1 00000003 [ 31.646695] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [ 31.646699] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF302 [ 31.646744] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF828 [ 31.646759] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF42A [ 31.647795] yenta_cardbus 0000:02:04.1: ISA IRQ mask 0x0c38, PCI irq 18 [ 31.647798] yenta_cardbus 0000:02:04.1: Socket status: 30000006 [ 31.647802] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 31.647811] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 31.647816] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x7fff: clean. [ 31.648648] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff [ 31.648652] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff [ 31.664039] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFB3C [ 31.664050] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFB69 [ 31.664057] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF608 [ 31.688057] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF7C3 [ 31.715707] type=1505 audit(1335300198.813:6): operation="profile_load" pid=729 name="/usr/share/gdm/guest-session/Xsession" [ 31.718192] type=1505 audit(1335300198.817:7): operation="profile_replace" pid=730 name="/sbin/dhclient3" [ 31.718495] type=1505 audit(1335300198.817:8): operation="profile_replace" pid=730 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 31.718666] type=1505 audit(1335300198.817:9): operation="profile_replace" pid=730 name="/usr/lib/connman/scripts/dhclient-script" [ 31.733352] type=1505 audit(1335300198.833:10): operation="profile_load" pid=731 name="/usr/bin/evince" [ 31.737106] type=1505 audit(1335300198.837:11): operation="profile_load" pid=731 name="/usr/bin/evince-previewer" [ 31.753083] [TTM] Zone kernel: Available graphics memory: 441970 kiB. [ 31.753087] [TTM] Zone highmem: Available graphics memory: 642390 kiB. [ 31.753101] [drm] nouveau 0000:01:00.0: 64 MiB VRAM [ 31.753165] agpgart-amd64 0000:00:00.0: AGP 2.0 bridge [ 31.753186] agpgart-amd64 0000:00:00.0: putting AGP V2 device into 4x mode [ 31.753231] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 31.753235] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture) [ 31.753623] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 31.754014] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 31.754024] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 31.754033] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 31.854162] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 31.854470] [drm] nouveau 0000:01:00.0: Detected a LVDS connector [ 31.955363] [drm] nouveau 0000:01:00.0: Detected a TV connector [ 31.959487] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 31.959492] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1) [ 31.959497] [drm] nouveau 0000:01:00.0: Calling LVDS script 1: [ 31.959501] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 31.959505] [drm] nouveau 0000:01:00.0: 0xE457: Parsing digital output script table [ 32.000188] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 32.001880] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 32.002625] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 32.003238] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 32.004150] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 32.015276] eth0: link down [ 32.015520] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.056044] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 32.056081] pci 0000:03:00.0: reg 10 io port: [0x00-0xff] [ 32.056089] pci 0000:03:00.0: reg 14 32bit mmio: [0x000000-0x0003ff] [ 32.056142] pci 0000:03:00.0: supports D1 D2 [ 32.056145] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 32.056149] pci 0000:03:00.0: PME# disabled [ 32.134476] Disabling lock debugging due to kernel taint [ 32.145992] ndiswrapper version 1.55 loaded (smp=yes, preempt=no) [ 32.337658] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 32.339348] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean. [ 32.343136] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 32.343750] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 32.348360] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 32.529748] apm: BIOS not found. [ 32.568048] floppy0: no floppy controllers found [ 32.744052] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2) [ 32.844210] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x49000, bo f14c5200 [ 32.844315] fb0: nouveaufb frame buffer device [ 32.844318] registered panic notifier [ 32.844324] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 33.262399] ndiswrapper: driver blkwgnv7 (Belkin,10/19/2006,5.87.19.106) loaded [ 33.262626] ndiswrapper 0000:03:00.0: enabling device (0000 -> 0003) [ 33.262639] ndiswrapper 0000:03:00.0: PCI INT A -> Link[LNK1] -> GSI 19 (level, low) -> IRQ 19 [ 33.263390] ndiswrapper 0000:03:00.0: setting latency timer to 64 [ 33.447230] vga16fb: initializing [ 33.447236] vga16fb: mapped to 0xc00a0000 [ 33.447243] vga16fb: not registering due to another framebuffer present [ 33.537157] ndiswrapper: using IRQ 19 [ 33.608838] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 21 [ 33.608846] Intel ICH 0000:00:06.0: PCI INT A -> Link[LACI] -> GSI 21 (level, low) -> IRQ 21 [ 33.608881] Intel ICH 0000:00:06.0: setting latency timer to 64 [ 33.740047] AC'97 0 analog subsections not ready [ 34.040292] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output A [ 34.040296] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 34.040300] [drm] nouveau 0000:01:00.0: 0xE4BA: Parsing digital output script table [ 34.060261] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1) [ 34.060266] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 34.060270] [drm] nouveau 0000:01:00.0: 0xE3E4: Parsing digital output script table [ 34.060288] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output A [ 34.061537] Console: switching to colour frame buffer device 160x50 [ 34.308033] intel8x0_measure_ac97_clock: measured 55446 usecs (2688 samples) [ 34.308036] intel8x0: clocking to 48000 [ 35.373497] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 35.374791] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 39.880689] wlan0: ethernet device 00:17:3f:2e:d3:11 using NDIS driver: blkwgnv7, version: 0x50056, NDIS version: 0x500, vendor: 'Belkin Wireless G Notebook/Desktop Card ', 1799:701F.5.conf [ 39.880841] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 39.881150] usbcore: registered new interface driver ndiswrapper [ 39.892699] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 54.921792] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 57.947938] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 68.880026] wlan0: no IPv6 routers present [ 72.984594] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 86.986856] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 102.982318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 126.632662] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 131.880083] ndiswrapper (mp_reset:64): wlan0 is being reset [ 137.617479] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 152.982273] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 163.007702] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 179.880090] ndiswrapper (mp_reset:64): wlan0 is being reset [ 245.880080] ndiswrapper (mp_reset:64): wlan0 is being reset [ 363.880068] ndiswrapper (mp_reset:64): wlan0 is being reset [ 433.880071] ndiswrapper (mp_reset:64): wlan0 is being reset [ 521.880058] ndiswrapper (mp_reset:64): wlan0 is being reset [ 553.880069] ndiswrapper (mp_reset:64): wlan0 is being reset [ 607.884966] ndiswrapper (mp_reset:64): wlan0 is being reset [ 835.880043] ndiswrapper (mp_reset:64): wlan0 is being reset [ 861.880041] ndiswrapper (mp_reset:64): wlan0 is being reset [ 997.880078] ndiswrapper (mp_reset:64): wlan0 is being reset