[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) [ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x5fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000005fff0000 (usable) [ 0.000000] modified: 000000005fff0000 - 000000005fff3000 (ACPI NVS) [ 0.000000] modified: 000000005fff3000 - 0000000060000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37856000 - 37fef0ac [ 0.000000] Allocated new RAMDISK: 008de000 - 010770ac [ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef0ab to 008de000 - 010770ab [ 0.000000] ACPI: RSDP 000f6570 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 5fff3000 0002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: FACP 5fff3040 00074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: DSDT 5fff30c0 0365B (v01 GBT AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 5fff0000 00040 [ 0.000000] ACPI: APIC 5fff6740 0005A (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 647MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd092] BRK ==> [00008da000 - 00008dd092] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008de000 - 00010770ac] NEW RAMDISK ==> [00008de000 - 00010770ac] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f4a90] f4a90 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0005fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0005fff0 [ 0.000000] On node 0 totalpages: 393099 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1079000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1296 pages used for memmap [ 0.000000] HighMem zone: 164578 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36024 r0 d21320 u4194304 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390027 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=178b1e2e-666c-4045-846f-c09543753a25 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7864000 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0005fff0) [ 0.000000] Memory: 1534664k/1572800k available (4673k kernel code, 36720k reserved, 2121k data, 656k init, 663496k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590653 - 0xc07a2e48 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590653 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2018.944 MHz processor. [ 0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 4037.88 BogoMIPS (lpj=8075776) [ 0.004056] Security Framework initialized [ 0.004126] AppArmor: AppArmor initialized [ 0.004141] Mount-cache hash table entries: 512 [ 0.004466] Initializing cgroup subsys ns [ 0.004478] Initializing cgroup subsys cpuacct [ 0.004486] Initializing cgroup subsys memory [ 0.004507] Initializing cgroup subsys devices [ 0.004513] Initializing cgroup subsys freezer [ 0.004518] Initializing cgroup subsys net_cls [ 0.004570] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004576] CPU: L2 cache: 512K [ 0.004580] CPU: Hyper-Threading is disabled [ 0.004589] mce: CPU supports 4 MCE banks [ 0.004612] CPU0: Thermal monitoring enabled (TM1) [ 0.004643] Performance Events: no PMU driver, software events only. [ 0.004657] Checking 'hlt' instruction... OK. [ 0.021456] SMP alternatives: switching to UP code [ 0.037389] Freeing SMP alternatives: 19k freed [ 0.037444] ACPI: Core revision 20090903 [ 0.048024] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.048039] ftrace: allocating 21771 entries in 43 pages [ 0.052198] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.052524] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.092973] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 07 [ 0.096001] Brought up 1 CPUs [ 0.096001] Total of 1 processors activated (4037.88 BogoMIPS). [ 0.096001] CPU0 attaching NULL sched-domain. [ 0.096001] devtmpfs: initialized [ 0.096001] regulator: core version 0.5 [ 0.096001] Time: 13:04:51 Date: 06/04/10 [ 0.096001] NET: Registered protocol family 16 [ 0.096001] EISA bus registered [ 0.096001] ACPI: bus type pci registered [ 0.120401] PCI: PCI BIOS revision 2.10 entry at 0xf9d70, last bus=2 [ 0.120406] PCI: Using configuration type 1 for base access [ 0.122035] bio: create slab at 0 [ 0.122801] ACPI: EC: Look up EC in DSDT [ 0.129696] ACPI: Interpreter enabled [ 0.129709] ACPI: (supports S0 S1 S4 S5) [ 0.129745] ACPI: Using IOAPIC for interrupt routing [ 0.135547] ACPI: No dock devices found. [ 0.135704] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.135784] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.136035] pci 0000:00:1f.0: quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO [ 0.136041] pci 0000:00:1f.0: quirk: region 4080-40bf claimed by ICH4 GPIO [ 0.136097] pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f] [ 0.136169] pci 0000:00:1f.2: reg 20 io port: [0xb000-0xb01f] [ 0.136242] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x500f] [ 0.136311] pci 0000:00:1f.4: reg 20 io port: [0xb800-0xb81f] [ 0.136385] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xe8ffffff] [ 0.136394] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.136403] pci 0000:01:00.0: reg 18 32bit mmio: [0xe9000000-0xe9ffffff] [ 0.136423] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.136495] pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xeaffffff] [ 0.136501] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.136569] pci 0000:02:01.0: reg 20 io port: [0x9000-0x901f] [ 0.136604] pci 0000:02:01.0: supports D1 D2 [ 0.136609] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136615] pci 0000:02:01.0: PME# disabled [ 0.136679] pci 0000:02:01.1: reg 20 io port: [0x9400-0x941f] [ 0.136712] pci 0000:02:01.1: supports D1 D2 [ 0.136716] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136722] pci 0000:02:01.1: PME# disabled [ 0.136764] pci 0000:02:01.2: reg 10 32bit mmio: [0xec002000-0xec0020ff] [ 0.136818] pci 0000:02:01.2: supports D1 D2 [ 0.136821] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136827] pci 0000:02:01.2: PME# disabled [ 0.136872] pci 0000:02:01.3: reg 10 32bit mmio: [0xec000000-0xec0007ff] [ 0.136881] pci 0000:02:01.3: reg 14 io port: [0x9800-0x987f] [ 0.136932] pci 0000:02:01.3: supports D2 [ 0.136936] pci 0000:02:01.3: PME# supported from D2 D3hot D3cold [ 0.136942] pci 0000:02:01.3: PME# disabled [ 0.136991] pci 0000:02:02.0: reg 10 io port: [0x9c00-0x9c7f] [ 0.137044] pci 0000:02:02.0: supports D2 [ 0.137048] pci 0000:02:02.0: PME# supported from D2 D3hot [ 0.137053] pci 0000:02:02.0: PME# disabled [ 0.137100] pci 0000:02:03.0: reg 10 io port: [0xa000-0xa0ff] [ 0.137110] pci 0000:02:03.0: reg 14 32bit mmio: [0xec001000-0xec0010ff] [ 0.137141] pci 0000:02:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.137164] pci 0000:02:03.0: supports D1 D2 [ 0.137167] pci 0000:02:03.0: PME# supported from D1 D2 D3hot [ 0.137173] pci 0000:02:03.0: PME# disabled [ 0.137224] pci 0000:00:1e.0: transparent bridge [ 0.137230] pci 0000:00:1e.0: bridge io port: [0x9000-0xafff] [ 0.137237] pci 0000:00:1e.0: bridge 32bit mmio: [0xeb000000-0xecffffff] [ 0.137255] pci_bus 0000:00: on NUMA node 0 [ 0.137264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.137413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.157239] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.157398] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.157552] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.157709] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) [ 0.157863] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.158020] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.158176] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.158332] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.158553] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.158562] vgaarb: loaded [ 0.158820] SCSI subsystem initialized [ 0.158987] libata version 3.00 loaded. [ 0.159123] usbcore: registered new interface driver usbfs [ 0.159146] usbcore: registered new interface driver hub [ 0.159195] usbcore: registered new device driver usb [ 0.159440] ACPI: WMI: Mapper loaded [ 0.159444] PCI: Using ACPI for IRQ routing [ 0.159701] NetLabel: Initializing [ 0.159705] NetLabel: domain hash size = 128 [ 0.159708] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.159743] NetLabel: unlabeled traffic allowed by default [ 0.159818] Switching to clocksource tsc [ 0.160001] AppArmor: AppArmor Filesystem Enabled [ 0.160001] pnp: PnP ACPI init [ 0.160001] ACPI: bus type pnp registered [ 0.164069] pnp: PnP ACPI: found 11 devices [ 0.164074] ACPI: ACPI bus type pnp unregistered [ 0.164083] PnPBIOS: Disabled by ACPI PNP [ 0.164122] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved [ 0.164129] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved [ 0.164135] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.164140] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.164145] system 00:00: iomem range 0x5fff0000-0x5fffffff could not be reserved [ 0.164149] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.164154] system 00:00: iomem range 0x100000-0x5ffeffff could not be reserved [ 0.164159] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.164164] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.164169] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.164174] system 00:00: iomem range 0xfff00000-0xffffffff has been reserved [ 0.164179] system 00:00: iomem range 0xe0000-0xeffff has been reserved [ 0.164191] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.164198] system 00:02: ioport range 0x800-0x805 has been reserved [ 0.199089] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.199093] pci 0000:00:01.0: IO window: disabled [ 0.199101] pci 0000:00:01.0: MEM window: 0xe8000000-0xeaffffff [ 0.199108] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xdfffffff [ 0.199117] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.199123] pci 0000:00:1e.0: IO window: 0x9000-0xafff [ 0.199130] pci 0000:00:1e.0: MEM window: 0xeb000000-0xecffffff [ 0.199137] pci 0000:00:1e.0: PREFETCH window: 0x60000000-0x600fffff [ 0.199164] pci 0000:00:1e.0: setting latency timer to 64 [ 0.199173] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.199177] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.199181] pci_bus 0000:01: resource 1 mem: [0xe8000000-0xeaffffff] [ 0.199186] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.199190] pci_bus 0000:02: resource 0 io: [0x9000-0xafff] [ 0.199194] pci_bus 0000:02: resource 1 mem: [0xeb000000-0xecffffff] [ 0.199198] pci_bus 0000:02: resource 2 pref mem [0x60000000-0x600fffff] [ 0.199202] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.199206] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.199278] NET: Registered protocol family 2 [ 0.199459] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.200260] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.202511] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.203915] TCP: Hash tables configured (established 131072 bind 65536) [ 0.203924] TCP reno registered [ 0.204346] NET: Registered protocol family 1 [ 0.204464] pci 0000:01:00.0: Boot video device [ 0.205001] cpufreq-nforce2: No nForce2 chipset. [ 0.205059] Scanning for low memory corruption every 60 seconds [ 0.205290] audit: initializing netlink socket (disabled) [ 0.205318] type=2000 audit(1275656691.204:1): initialized [ 0.217395] Trying to unpack rootfs image as initramfs... [ 0.232259] highmem bounce pool size: 64 pages [ 0.232271] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.234780] VFS: Disk quotas dquot_6.5.2 [ 0.234891] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.240948] fuse init (API version 7.13) [ 0.241176] msgmni has been set to 1703 [ 0.241687] alg: No test for stdrng (krng) [ 0.241805] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.241812] io scheduler noop registered [ 0.241815] io scheduler anticipatory registered [ 0.241818] io scheduler deadline registered [ 0.241896] io scheduler cfq registered (default) [ 0.242105] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.242148] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.242326] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.242335] ACPI: Power Button [PWRB] [ 0.242422] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.242436] ACPI: Sleep Button [SLPB] [ 0.242524] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.242529] ACPI: Power Button [PWRF] [ 0.242949] processor LNXCPU:00: registered as cooling_device0 [ 0.248356] isapnp: Scanning for PnP cards... [ 0.261103] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.261243] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.261365] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.261867] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.262055] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.263855] brd: module loaded [ 0.308341] loop: module loaded [ 0.308557] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.308783] ata_piix 0000:00:1f.1: version 2.13 [ 0.308917] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.312245] scsi0 : ata_piix [ 0.312536] scsi1 : ata_piix [ 0.313940] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.313945] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.314634] Fixed MDIO Bus: probed [ 0.314698] PPP generic driver version 2.4.2 [ 0.314842] tun: Universal TUN/TAP device driver, 1.6 [ 0.314846] tun: (C) 1999-2004 Max Krasnyansky [ 0.315019] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.315068] alloc irq_desc for 16 on node -1 [ 0.315072] alloc kstat_irqs on node -1 [ 0.315089] ehci_hcd 0000:02:01.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 0.315122] ehci_hcd 0000:02:01.2: EHCI Host Controller [ 0.315195] ehci_hcd 0000:02:01.2: new USB bus registered, assigned bus number 1 [ 0.315291] ehci_hcd 0000:02:01.2: irq 16, io mem 0xec002000 [ 0.324479] ehci_hcd 0000:02:01.2: USB 2.0 started, EHCI 1.00 [ 0.324769] usb usb1: configuration #1 chosen from 1 choice [ 0.324829] hub 1-0:1.0: USB hub found [ 0.324855] hub 1-0:1.0: 4 ports detected [ 0.324962] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.324995] uhci_hcd: USB Universal Host Controller Interface driver [ 0.325106] alloc irq_desc for 19 on node -1 [ 0.325111] alloc kstat_irqs on node -1 [ 0.325124] uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.325142] uhci_hcd 0000:00:1f.2: setting latency timer to 64 [ 0.325149] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 0.325234] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 2 [ 0.325287] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000b000 [ 0.325460] usb usb2: configuration #1 chosen from 1 choice [ 0.325508] hub 2-0:1.0: USB hub found [ 0.325526] hub 2-0:1.0: 2 ports detected [ 0.325600] alloc irq_desc for 23 on node -1 [ 0.325605] alloc kstat_irqs on node -1 [ 0.325613] uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23 [ 0.325623] uhci_hcd 0000:00:1f.4: setting latency timer to 64 [ 0.325628] uhci_hcd 0000:00:1f.4: UHCI Host Controller [ 0.325685] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 3 [ 0.325723] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000b800 [ 0.325875] usb usb3: configuration #1 chosen from 1 choice [ 0.325921] hub 3-0:1.0: USB hub found [ 0.325939] hub 3-0:1.0: 2 ports detected [ 0.326014] alloc irq_desc for 21 on node -1 [ 0.326019] alloc kstat_irqs on node -1 [ 0.326029] uhci_hcd 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.326039] uhci_hcd 0000:02:01.0: UHCI Host Controller [ 0.326106] uhci_hcd 0000:02:01.0: new USB bus registered, assigned bus number 4 [ 0.326145] uhci_hcd 0000:02:01.0: irq 21, io base 0x00009000 [ 0.326322] usb usb4: configuration #1 chosen from 1 choice [ 0.326369] hub 4-0:1.0: USB hub found [ 0.326390] hub 4-0:1.0: 2 ports detected [ 0.326462] alloc irq_desc for 22 on node -1 [ 0.326467] alloc kstat_irqs on node -1 [ 0.326475] uhci_hcd 0000:02:01.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.326485] uhci_hcd 0000:02:01.1: UHCI Host Controller [ 0.326545] uhci_hcd 0000:02:01.1: new USB bus registered, assigned bus number 5 [ 0.326583] uhci_hcd 0000:02:01.1: irq 22, io base 0x00009400 [ 0.326740] usb usb5: configuration #1 chosen from 1 choice [ 0.326793] hub 5-0:1.0: USB hub found [ 0.326820] hub 5-0:1.0: 2 ports detected [ 0.326986] PNP: No PS/2 controller found. Probing ports directly. [ 0.334536] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.334555] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.334890] mice: PS/2 mouse device common for all mice [ 0.335146] rtc_cmos 00:04: RTC can wake from S4 [ 0.335235] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.335267] rtc0: alarms up to one month, 242 bytes nvram [ 0.335507] device-mapper: uevent: version 1.0.3 [ 0.340785] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.340952] device-mapper: multipath: version 1.1.0 loaded [ 0.340958] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.341195] EISA: Probing bus 0 at eisa.0 [ 0.341222] Cannot allocate resource for EISA slot 4 [ 0.341226] Cannot allocate resource for EISA slot 5 [ 0.341241] EISA: Detected 0 cards. [ 0.344733] cpuidle: using governor ladder [ 0.344739] cpuidle: using governor menu [ 0.345591] TCP cubic registered [ 0.345814] NET: Registered protocol family 10 [ 0.346559] lo: Disabled Privacy Extensions [ 0.347083] NET: Registered protocol family 17 [ 0.347228] Using IPI No-Shortcut mode [ 0.347446] PM: Resume from disk failed. [ 0.347473] registered taskstats version 1 [ 0.347794] Magic number: 14:190:78 [ 0.347940] rtc_cmos 00:04: setting system clock to 2010-06-04 13:04:51 UTC (1275656691) [ 0.347946] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.347949] EDD information not available. [ 0.508927] ata2.00: ATA-7: HDS725050KLAT80, K2AOAB0A, max UDMA/133 [ 0.508935] ata2.00: 976773168 sectors, multi 16: LBA48 [ 0.524837] ata2.00: configured for UDMA/100 [ 0.685023] ata1.00: ATAPI: DVD DC 16X8X5, 103, max UDMA/66 [ 0.685081] ata1.01: ATAPI: JLMS XJ-HD163D, GHR8, max UDMA/33 [ 0.700840] ata1.00: configured for UDMA/66 [ 0.708769] ata1.01: configured for UDMA/33 [ 0.940312] isapnp: No Plug & Play device found [ 0.942190] scsi 0:0:0:0: CD-ROM ATAPI DVD DC 16X8X5 103 PQ: 0 ANSI: 5 [ 0.952496] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.952508] Uniform CD-ROM driver Revision: 3.20 [ 0.952805] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.952947] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.953453] scsi 0:0:1:0: CD-ROM JLMS XJ-HD163D GHR8 PQ: 0 ANSI: 5 [ 0.958686] sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray [ 0.958964] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 0.959094] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 0.959379] scsi 1:0:0:0: Direct-Access ATA HDS725050KLAT80 K2AO PQ: 0 ANSI: 5 [ 0.959585] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 0.959712] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.959799] sd 1:0:0:0: [sda] Write Protect is off [ 0.959804] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.959847] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.960101] sda: sda1 < [ 0.975231] Freeing initrd memory: 7780k freed [ 0.997182] sda5 sda6 sda7 sda8 > [ 1.020111] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.020144] Freeing unused kernel memory: 656k freed [ 1.021890] Write protecting the kernel text: 4676k [ 1.021935] Write protecting the kernel read-only data: 1840k [ 1.067359] udev: starting version 151 [ 1.112155] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 1.517435] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.517504] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.524331] 8139too Fast Ethernet driver 0.9.28 [ 1.524420] 8139too 0000:02:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.533186] eth0: RealTek RTL8139 at 0xa000, 00:50:bf:80:2b:a4, IRQ 16 [ 1.535301] ohci1394 0000:02:01.3: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.594181] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[ec000000-ec0007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.752480] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 1.804083] usb 3-2: not running at top speed; connect to a high speed hub [ 1.836841] usb 3-2: configuration #1 chosen from 1 choice [ 2.084064] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 2.261910] usb 4-1: configuration #1 chosen from 1 choice [ 2.504075] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 2.666001] usb 4-2: configuration #1 chosen from 1 choice [ 2.668856] hub 4-2:1.0: USB hub found [ 2.670764] hub 4-2:1.0: 4 ports detected [ 2.872272] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106664566a9dc] [ 2.916066] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 3.085517] usb 5-1: configuration #1 chosen from 1 choice [ 3.088322] hub 5-1:1.0: USB hub found [ 3.090275] hub 5-1:1.0: 4 ports detected [ 3.336136] usb 5-2: new low speed USB device using uhci_hcd and address 3 [ 3.510623] usb 5-2: configuration #1 chosen from 1 choice [ 6.417598] hub 4-2:1.0: Cannot enable port 4. Maybe the USB cable is bad? [ 8.183574] Adding 6400380k swap on /dev/sda6. Priority:-1 extents:1 across:6400380k [ 8.250767] udev: starting version 151 [ 8.407027] lp: driver loaded but no devices found [ 8.430807] intel_rng: FWH not detected [ 8.442471] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.643746] Linux agpgart interface v0.103 [ 8.812419] parport_pc 00:09: reported by Plug and Play ACPI [ 8.812470] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 8.819842] vga16fb: initializing [ 8.819853] vga16fb: mapped to 0xc00a0000 [ 8.819994] fb0: VGA16 VGA frame buffer device [ 8.911131] agpgart-intel 0000:00:00.0: Intel 845G Chipset [ 8.964082] lp0: using parport0 (interrupt-driven). [ 9.146376] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 9.207724] Initializing USB Mass Storage driver... [ 9.261037] scsi2 : SCSI emulation for USB Mass Storage devices [ 9.278901] usbcore: registered new interface driver usb-storage [ 9.278909] USB Mass Storage support registered. [ 9.279490] usb-storage: device found at 2 [ 9.279496] usb-storage: waiting for device to settle before scanning [ 9.329340] hub 4-2:1.0: Cannot enable port 4. Maybe the USB cable is bad? [ 9.466953] type=1505 audit(1275656700.616:2): operation="profile_load" pid=490 name="/sbin/dhclient3" [ 9.467742] type=1505 audit(1275656700.616:3): operation="profile_load" pid=490 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.484481] type=1505 audit(1275656700.636:4): operation="profile_load" pid=490 name="/usr/lib/connman/scripts/dhclient-script" [ 9.806590] nvidia: module license 'NVIDIA' taints kernel. [ 9.806598] Disabling lock debugging due to kernel taint [ 11.477604] ppdev: user-space parallel port driver [ 11.484789] usbcore: registered new interface driver hiddev [ 11.506988] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:01.0/usb4/4-1/4-1:1.0/input/input4 [ 11.507412] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:02:01.0-1/input0 [ 11.707228] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:01.0/usb4/4-1/4-1:1.1/input/input5 [ 11.707526] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:02:01.0-1/input1 [ 11.711528] REISERFS (device sda7): found reiserfs format "3.6" with standard journal [ 11.711573] REISERFS (device sda7): using ordered data mode [ 11.729033] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:01.1/usb5/5-2/5-2:1.0/input/input6 [ 11.729283] generic-usb 0003:046D:C50E.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:02:01.1-2/input0 [ 11.729350] usbcore: registered new interface driver usbhid [ 11.729355] usbhid: v2.6:USB HID core driver [ 11.729399] REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 11.731704] REISERFS (device sda7): checking transaction log (sda7) [ 11.783589] REISERFS (device sda7): Using r5 hash to sort names [ 12.049104] ALS4000 0000:02:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.110862] Console: switching to colour frame buffer device 80x30 [ 12.135834] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.135860] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 12.142085] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.15 Thu Mar 11 21:41:46 PST 2010 [ 12.610510] type=1505 audit(1275656703.760:5): operation="profile_load" pid=662 name="/usr/share/gdm/guest-session/Xsession" [ 12.619518] type=1505 audit(1275656703.768:6): operation="profile_replace" pid=663 name="/sbin/dhclient3" [ 12.645974] type=1505 audit(1275656703.796:7): operation="profile_replace" pid=663 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.646448] type=1505 audit(1275656703.796:8): operation="profile_replace" pid=663 name="/usr/lib/connman/scripts/dhclient-script" [ 12.708232] type=1505 audit(1275656703.860:9): operation="profile_load" pid=665 name="/usr/bin/evince" [ 12.746278] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 12.764489] type=1505 audit(1275656703.916:10): operation="profile_load" pid=665 name="/usr/bin/evince-previewer" [ 12.838297] type=1505 audit(1275656703.988:11): operation="profile_load" pid=665 name="/usr/bin/evince-thumbnailer" [ 13.518258] hub 4-2:1.0: Cannot enable port 4. Maybe the USB cable is bad? [ 14.522889] usb-storage: device scan complete [ 14.640505] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 14.644972] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 14.664462] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 14.748245] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 14.748269] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 14.748298] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode [ 16.861982] hub 4-2:1.0: Cannot enable port 4. Maybe the USB cable is bad? [ 16.863009] hub 4-2:1.0: unable to enumerate USB device on port 4 [ 22.964025] eth0: no IPv6 routers present [62992.613849] usb 5-1.2: new full speed USB device using uhci_hcd and address 4 [62992.716857] usb 5-1.2: not running at top speed; connect to a high speed hub [62992.746173] usb 5-1.2: configuration #1 chosen from 1 choice [62992.749340] scsi3 : SCSI emulation for USB Mass Storage devices [62992.749692] usb-storage: device found at 4 [62992.749697] usb-storage: waiting for device to settle before scanning [62995.734095] hub 4-2:1.0: Cannot enable port 4. Maybe the USB cable is bad? [62997.750111] usb-storage: device scan complete [62997.755661] scsi 3:0:0:0: Direct-Access Flash Disk 5.00 PQ: 0 ANSI: 2 [62997.765153] sd 3:0:0:0: Attached scsi generic sg4 type 0 [62997.774035] sd 3:0:0:0: [sdc] 247808 512-byte logical blocks: (126 MB/121 MiB) [62997.779867] sd 3:0:0:0: [sdc] Write Protect is off [62997.779879] sd 3:0:0:0: [sdc] Mode Sense: 0b 00 00 08 [62997.779884] sd 3:0:0:0: [sdc] Assuming drive cache: write through [62997.795124] sd 3:0:0:0: [sdc] Assuming drive cache: write through [62997.795145] sdc: sdc1 [62997.815050] sd 3:0:0:0: [sdc] Assuming drive cache: write through [62997.815066] sd 3:0:0:0: [sdc] Attached SCSI removable disk [62998.641772] hub 4-2:1.0: Cannot enable port 4. Maybe the USB cable is bad? [63001.557464] hub 4-2:1.0: Cannot enable port 4. Maybe the USB cable is bad? [63004.465061] hub 4-2:1.0: Cannot enable port 4. Maybe the USB cable is bad? [63004.466072] hub 4-2:1.0: unable to enumerate USB device on port 4 [63608.424329] usb 5-1.2: USB disconnect, address 4 [63727.712305] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [63727.731554] SGI XFS Quota Management subsystem [63727.755082] JFS: nTxBlock = 8192, nTxLock = 65536 [63727.803581] NTFS driver 2.1.29 [Flags: R/O MODULE]. [63727.866434] QNX4 filesystem 0.2.3 registered. [63727.947967] Btrfs loaded