[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-12-generic (buildd@crested) (gcc version 4.4.3 (Ubuntu 4.4.3-2ubuntu1) ) #17-Ubuntu SMP Fri Feb 5 08:16:30 UTC 2010 (Ubuntu 2.6.32-12.17-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-12-generic root=UUID=53cbfa0b-9cf9-4c8d-8fd4-f062001a500f ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable) [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 0100000000 mask FFC0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009c000 (usable) [ 0.000000] modified: 000000000009c000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfff0000 (usable) [ 0.000000] modified: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) [ 0.000000] modified: 00000000bfff3000 - 00000000c0000000 (ACPI data) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfff0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfff0000 page 4k [ 0.000000] kernel direct mapping tables up to bfff0000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000 [ 0.000000] RAMDISK: 37868000 - 37fefcba [ 0.000000] ACPI: RSDP 00000000000f81b0 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 00000000bfff3040 00034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000bfff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000bfff3180 0623B (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000bfff0000 00040 [ 0.000000] ACPI: SSDT 00000000bfff94c0 00188 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: MCFG 00000000bfff96c0 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000bfff9400 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [0000000000014000 - 0000000000018fff] [ 0.000000] bootmap [0000000000019000 - 0000000000040fff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a70ee4] TEXT DATA BSS ==> [0001000000 - 0001a70ee4] [ 0.000000] #3 [0037868000 - 0037fefcba] RAMDISK ==> [0037868000 - 0037fefcba] [ 0.000000] #4 [000009c000 - 0000100000] BIOS reserved ==> [000009c000 - 0000100000] [ 0.000000] #5 [0001a71000 - 0001a7107a] BRK ==> [0001a71000 - 0001a7107a] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000] [ 0.000000] found SMP MP-table at [ffff8800000f3ba0] f3ba0 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bfff0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048444 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 107 pages reserved [ 0.000000] DMA zone: 3817 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 768040 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfff3000 [ 0.000000] PM: Registered nosave memory: 00000000bfff3000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91288 r8192 d23400 u1048576 [ 0.000000] pcpu-alloc: s91288 r8192 d23400 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030417 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-12-generic root=UUID=53cbfa0b-9cf9-4c8d-8fd4-f062001a500f ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4052000k/5242880k available (5534k kernel code, 1049104k absent, 141776k reserved, 3131k data, 884k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2009.460 MHz processor. [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.92 BogoMIPS (lpj=20094600) [ 0.010039] Security Framework initialized [ 0.010066] AppArmor: AppArmor initialized [ 0.010511] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.022249] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.023523] Mount-cache hash table entries: 256 [ 0.023705] Initializing cgroup subsys ns [ 0.023710] Initializing cgroup subsys cpuacct [ 0.023715] Initializing cgroup subsys memory [ 0.023725] Initializing cgroup subsys devices [ 0.023728] Initializing cgroup subsys freezer [ 0.023730] Initializing cgroup subsys net_cls [ 0.023753] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.023755] CPU: L2 Cache: 512K (64 bytes/line) [ 0.023758] CPU 0/0x0 -> Node 0 [ 0.023760] tseg: 0000000000 [ 0.023776] CPU: Physical Processor ID: 0 [ 0.023778] CPU: Processor Core ID: 0 [ 0.023782] mce: CPU supports 5 MCE banks [ 0.023794] Performance Events: AMD PMU driver. [ 0.023799] ... version: 0 [ 0.023801] ... bit width: 48 [ 0.023803] ... generic registers: 4 [ 0.023805] ... value mask: 0000ffffffffffff [ 0.023807] ... max period: 00007fffffffffff [ 0.023809] ... fixed-purpose events: 0 [ 0.023811] ... event mask: 000000000000000f [ 0.025562] ACPI: Core revision 20090903 [ 0.036441] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036455] ftrace: allocating 23559 entries in 93 pages [ 0.040121] Setting APIC routing to flat [ 0.040442] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.144362] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] Calibrating delay using timer specific routine.. 4018.65 BogoMIPS (lpj=20093257) [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.300105] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 [ 0.300124] Brought up 2 CPUs [ 0.300127] Total of 2 processors activated (8037.57 BogoMIPS). [ 0.300303] CPU0 attaching sched-domain: [ 0.300306] domain 0: span 0-1 level MC [ 0.300309] groups: 0 1 [ 0.300315] CPU1 attaching sched-domain: [ 0.300317] domain 0: span 0-1 level MC [ 0.300319] groups: 1 0 [ 0.300511] tmpfs: No value for mount option 'mode' [ 0.300515] devtmpfs: initialized [ 0.300874] regulator: core version 0.5 [ 0.300899] Time: 15:50:54 Date: 02/08/10 [ 0.300955] NET: Registered protocol family 16 [ 0.301090] node 0 link 0: io port [6000, ffff] [ 0.301093] TOM: 00000000c0000000 aka 3072M [ 0.301096] node 0 link 0: mmio [a0000, bffff] [ 0.301099] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.301102] node 0 link 0: mmio [c0000000, febfffff] [ 0.301106] node 0 link 0: mmio [e0000000, e05fffff] [ 0.301108] TOM2: 0000000140000000 aka 5120M [ 0.301111] bus: [00,05] on node 0 link 0 [ 0.301113] bus: 00 index 0 io port: [0, ffff] [ 0.301115] bus: 00 index 1 mmio: [a0000, bffff] [ 0.301117] bus: 00 index 2 mmio: [c0000000, ffffffff] [ 0.301120] bus: 00 index 3 mmio: [140000000, fcffffffff] [ 0.301127] ACPI: bus type pci registered [ 0.301201] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.301204] PCI: MCFG area at e0000000 reserved in E820 [ 0.312806] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.312811] PCI: Using configuration type 1 for base access [ 0.313720] Trying to unpack rootfs image as initramfs... [ 0.330170] bio: create slab at 0 [ 0.330918] ACPI: EC: Look up EC in DSDT [ 0.339335] ACPI: Interpreter enabled [ 0.339339] ACPI: (supports S0 S3 S4 S5) [ 0.339367] ACPI: Using IOAPIC for interrupt routing [ 0.348656] ACPI: No dock devices found. [ 0.349665] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.349789] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.349808] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc1f] [ 0.349817] pci 0000:00:01.1: reg 20 io port: [0xf800-0xf83f] [ 0.349822] pci 0000:00:01.1: reg 24 io port: [0xf400-0xf43f] [ 0.349833] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.349836] pci 0000:00:01.1: PME# disabled [ 0.349861] pci 0000:00:02.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff] [ 0.349879] pci 0000:00:02.0: supports D1 D2 [ 0.349882] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.349885] pci 0000:00:02.0: PME# disabled [ 0.349905] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 0.349927] pci 0000:00:02.1: supports D1 D2 [ 0.349929] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.349932] pci 0000:00:02.1: PME# disabled [ 0.349957] pci 0000:00:04.0: reg 10 io port: [0xf000-0xf0ff] [ 0.349961] pci 0000:00:04.0: reg 14 io port: [0xec00-0xecff] [ 0.349966] pci 0000:00:04.0: reg 18 32bit mmio: [0xfebfd000-0xfebfdfff] [ 0.349981] pci 0000:00:04.0: supports D1 D2 [ 0.350038] pci 0000:00:06.0: reg 20 io port: [0xe000-0xe00f] [ 0.350066] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7] [ 0.350070] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3] [ 0.350074] pci 0000:00:07.0: reg 18 io port: [0x970-0x977] [ 0.350078] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73] [ 0.350082] pci 0000:00:07.0: reg 20 io port: [0xcc00-0xcc0f] [ 0.350086] pci 0000:00:07.0: reg 24 32bit mmio: [0xfebfb000-0xfebfbfff] [ 0.350111] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7] [ 0.350115] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3] [ 0.350119] pci 0000:00:08.0: reg 18 io port: [0x960-0x967] [ 0.350123] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63] [ 0.350127] pci 0000:00:08.0: reg 20 io port: [0xb800-0xb80f] [ 0.350132] pci 0000:00:08.0: reg 24 32bit mmio: [0xfebfa000-0xfebfafff] [ 0.350170] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfebf9000-0xfebf9fff] [ 0.350175] pci 0000:00:0a.0: reg 14 io port: [0xb400-0xb407] [ 0.350191] pci 0000:00:0a.0: supports D1 D2 [ 0.350193] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.350196] pci 0000:00:0a.0: PME# disabled [ 0.350234] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.350237] pci 0000:00:0b.0: PME# disabled [ 0.350273] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.350276] pci 0000:00:0c.0: PME# disabled [ 0.350312] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.350315] pci 0000:00:0d.0: PME# disabled [ 0.350350] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.350353] pci 0000:00:0e.0: PME# disabled [ 0.350469] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfe9fe000-0xfe9fffff] [ 0.350510] pci 0000:00:09.0: transparent bridge [ 0.350513] pci 0000:00:09.0: bridge io port: [0xa000-0xafff] [ 0.350516] pci 0000:00:09.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.350520] pci 0000:00:09.0: bridge 32bit mmio pref: [0xfea00000-0xfeafffff] [ 0.350555] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff] [ 0.350558] pci 0000:00:0b.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.350562] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfe700000-0xfe7fffff] [ 0.350597] pci 0000:00:0c.0: bridge io port: [0x8000-0x8fff] [ 0.350600] pci 0000:00:0c.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff] [ 0.350604] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfe500000-0xfe5fffff] [ 0.350639] pci 0000:00:0d.0: bridge io port: [0x7000-0x7fff] [ 0.350642] pci 0000:00:0d.0: bridge 32bit mmio: [0xfe400000-0xfe4fffff] [ 0.350646] pci 0000:00:0d.0: bridge 64bit mmio pref: [0xfe300000-0xfe3fffff] [ 0.350671] pci 0000:05:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.350679] pci 0000:05:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.350687] pci 0000:05:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff] [ 0.350692] pci 0000:05:00.0: reg 24 io port: [0x6c00-0x6c7f] [ 0.350697] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.350747] pci 0000:00:0e.0: bridge io port: [0x6000-0x6fff] [ 0.350750] pci 0000:00:0e.0: bridge 32bit mmio: [0xfb000000-0xfdffffff] [ 0.350754] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.350769] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.351004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.420835] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.420986] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.421135] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 0.421282] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.421431] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.421580] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 0.421727] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.421883] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.422032] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.422180] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.422329] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.422477] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.422624] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.422784] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.422942] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.423100] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.423273] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.423440] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.423608] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.423774] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.423878] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.424054] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.424231] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.424407] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.424582] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.424757] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.424940] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.425116] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.425292] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.425481] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.425667] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.425855] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.425998] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.426001] vgaarb: loaded [ 0.426139] SCSI subsystem initialized [ 0.426247] libata version 3.00 loaded. [ 0.426338] usbcore: registered new interface driver usbfs [ 0.426351] usbcore: registered new interface driver hub [ 0.426382] usbcore: registered new device driver usb [ 0.426542] ACPI: WMI: Mapper loaded [ 0.426544] PCI: Using ACPI for IRQ routing [ 0.426720] NetLabel: Initializing [ 0.426722] NetLabel: domain hash size = 128 [ 0.426724] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.426741] NetLabel: unlabeled traffic allowed by default [ 0.426784] Switching to clocksource jiffies [ 0.428695] AppArmor: AppArmor Filesystem Enabled [ 0.428724] pnp: PnP ACPI init [ 0.428748] ACPI: bus type pnp registered [ 0.434794] pnp: PnP ACPI: found 13 devices [ 0.434797] ACPI: ACPI bus type pnp unregistered [ 0.434809] system 00:00: ioport range 0x1000-0x107f has been reserved [ 0.434812] system 00:00: ioport range 0x1080-0x10ff has been reserved [ 0.434815] system 00:00: ioport range 0x1400-0x147f has been reserved [ 0.434818] system 00:00: ioport range 0x1480-0x14ff has been reserved [ 0.434822] system 00:00: ioport range 0x1800-0x187f has been reserved [ 0.434824] system 00:00: ioport range 0x1880-0x18ff has been reserved [ 0.434831] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.434834] system 00:02: ioport range 0x800-0x807 has been reserved [ 0.434837] system 00:02: ioport range 0x290-0x30f has been reserved [ 0.434840] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.434848] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.434854] system 00:0c: iomem range 0xd1800-0xd3fff has been reserved [ 0.434857] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.434860] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.434863] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.434867] system 00:0c: iomem range 0xbfff0000-0xbfffffff could not be reserved [ 0.434870] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.434873] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.434876] system 00:0c: iomem range 0x100000-0xbffeffff could not be reserved [ 0.434879] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.434883] system 00:0c: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.434886] system 00:0c: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.434889] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.434892] system 00:0c: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.434895] system 00:0c: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.439609] Switching to clocksource acpi_pm [ 0.439872] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.439872] pci 0000:00:09.0: IO window: 0xa000-0xafff [ 0.439872] pci 0000:00:09.0: MEM window: 0xfe900000-0xfe9fffff [ 0.439872] pci 0000:00:09.0: PREFETCH window: 0xfea00000-0xfeafffff [ 0.439872] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.439872] pci 0000:00:0b.0: IO window: 0x9000-0x9fff [ 0.439872] pci 0000:00:0b.0: MEM window: 0xfe800000-0xfe8fffff [ 0.439872] pci 0000:00:0b.0: PREFETCH window: 0x000000fe700000-0x000000fe7fffff [ 0.439872] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.439872] pci 0000:00:0c.0: IO window: 0x8000-0x8fff [ 0.439872] pci 0000:00:0c.0: MEM window: 0xfe600000-0xfe6fffff [ 0.439872] pci 0000:00:0c.0: PREFETCH window: 0x000000fe500000-0x000000fe5fffff [ 0.439872] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 [ 0.439872] pci 0000:00:0d.0: IO window: 0x7000-0x7fff [ 0.439872] pci 0000:00:0d.0: MEM window: 0xfe400000-0xfe4fffff [ 0.439872] pci 0000:00:0d.0: PREFETCH window: 0x000000fe300000-0x000000fe3fffff [ 0.439872] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05 [ 0.439872] pci 0000:00:0e.0: IO window: 0x6000-0x6fff [ 0.439872] pci 0000:00:0e.0: MEM window: 0xfb000000-0xfdffffff [ 0.439872] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.439872] pci 0000:00:09.0: setting latency timer to 64 [ 0.439872] pci 0000:00:0b.0: setting latency timer to 64 [ 0.439872] pci 0000:00:0c.0: setting latency timer to 64 [ 0.439872] pci 0000:00:0d.0: setting latency timer to 64 [ 0.439872] pci 0000:00:0e.0: setting latency timer to 64 [ 0.439872] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.439872] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.439872] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.439872] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff] [ 0.439872] pci_bus 0000:01: resource 2 pref mem [0xfea00000-0xfeafffff] [ 0.439872] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.439872] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.439872] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff] [ 0.439872] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff] [ 0.439872] pci_bus 0000:02: resource 2 pref mem [0xfe700000-0xfe7fffff] [ 0.439872] pci_bus 0000:03: resource 0 io: [0x8000-0x8fff] [ 0.439872] pci_bus 0000:03: resource 1 mem: [0xfe600000-0xfe6fffff] [ 0.439872] pci_bus 0000:03: resource 2 pref mem [0xfe500000-0xfe5fffff] [ 0.439872] pci_bus 0000:04: resource 0 io: [0x7000-0x7fff] [ 0.439872] pci_bus 0000:04: resource 1 mem: [0xfe400000-0xfe4fffff] [ 0.439872] pci_bus 0000:04: resource 2 pref mem [0xfe300000-0xfe3fffff] [ 0.439872] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff] [ 0.439872] pci_bus 0000:05: resource 1 mem: [0xfb000000-0xfdffffff] [ 0.439872] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.439872] NET: Registered protocol family 2 [ 0.439872] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.439872] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.439872] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.439872] TCP: Hash tables configured (established 524288 bind 65536) [ 0.439872] TCP reno registered [ 0.439872] NET: Registered protocol family 1 [ 0.460114] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.460121] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 0.460128] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.460132] pci 0000:00:0b.0: Linking AER extended capability [ 0.460173] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.460178] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 0.460186] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.460188] pci 0000:00:0c.0: Linking AER extended capability [ 0.460233] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.460239] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 0.460246] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.460249] pci 0000:00:0d.0: Linking AER extended capability [ 0.460297] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.460303] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 0.460310] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.460313] pci 0000:00:0e.0: Linking AER extended capability [ 0.460334] pci 0000:05:00.0: Boot video device [ 0.460461] PCI-DMA: Disabling AGP. [ 0.460626] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.460628] PCI-DMA: using GART IOMMU. [ 0.460634] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.461579] Scanning for low memory corruption every 60 seconds [ 0.461751] audit: initializing netlink socket (disabled) [ 0.461765] type=2000 audit(1265644254.460:1): initialized [ 0.471618] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.473050] VFS: Disk quotas dquot_6.5.2 [ 0.473107] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.473777] fuse init (API version 7.13) [ 0.473862] msgmni has been set to 7914 [ 0.474135] alg: No test for stdrng (krng) [ 0.474145] io scheduler noop registered [ 0.474147] io scheduler anticipatory registered [ 0.474149] io scheduler deadline registered [ 0.474194] io scheduler cfq registered (default) [ 0.474361] alloc irq_desc for 24 on node 0 [ 0.474364] alloc kstat_irqs on node 0 [ 0.474374] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X [ 0.474380] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.474482] alloc irq_desc for 25 on node 0 [ 0.474484] alloc kstat_irqs on node 0 [ 0.474489] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X [ 0.474494] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.474598] alloc irq_desc for 26 on node 0 [ 0.474600] alloc kstat_irqs on node 0 [ 0.474605] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X [ 0.474609] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.474715] alloc irq_desc for 27 on node 0 [ 0.474717] alloc kstat_irqs on node 0 [ 0.474722] pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X [ 0.474726] pcieport 0000:00:0e.0: setting latency timer to 64 [ 0.474785] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.474810] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.474942] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.474946] ACPI: Power Button [PWRB] [ 0.475013] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.475016] ACPI: Power Button [PWRF] [ 0.475074] fan PNP0C0B:00: registered as cooling_device0 [ 0.475080] ACPI: Fan [FAN] (on) [ 0.475654] processor LNXCPU:00: registered as cooling_device1 [ 0.475696] processor LNXCPU:01: registered as cooling_device2 [ 0.480346] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.480354] ACPI: Thermal Zone [THRM] (40 C) [ 0.481826] Linux agpgart interface v0.103 [ 0.481869] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.481967] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.482054] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.482308] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.482423] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.483545] brd: module loaded [ 0.484048] loop: module loaded [ 0.484159] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.484508] sata_nv 0000:00:07.0: version 3.5 [ 0.484931] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.484936] alloc irq_desc for 23 on node 0 [ 0.484938] alloc kstat_irqs on node 0 [ 0.484948] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.485020] sata_nv 0000:00:07.0: setting latency timer to 64 [ 0.485087] scsi0 : sata_nv [ 0.485182] scsi1 : sata_nv [ 0.485357] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 23 [ 0.485360] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 23 [ 0.485793] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.485797] alloc irq_desc for 22 on node 0 [ 0.485799] alloc kstat_irqs on node 0 [ 0.485805] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.485851] sata_nv 0000:00:08.0: setting latency timer to 64 [ 0.485905] scsi2 : sata_nv [ 0.485970] scsi3 : sata_nv [ 0.486142] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 22 [ 0.486145] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 22 [ 0.486310] pata_amd 0000:00:06.0: version 0.4.1 [ 0.486350] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.486409] scsi4 : pata_amd [ 0.486470] scsi5 : pata_amd [ 0.487223] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14 [ 0.487227] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15 [ 0.487921] Fixed MDIO Bus: probed [ 0.487956] PPP generic driver version 2.4.2 [ 0.488027] tun: Universal TUN/TAP device driver, 1.6 [ 0.488029] tun: (C) 1999-2004 Max Krasnyansky [ 0.488143] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.488556] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 0.488562] alloc irq_desc for 21 on node 0 [ 0.488564] alloc kstat_irqs on node 0 [ 0.488576] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 0.488605] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.488609] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.488652] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.488690] ehci_hcd 0000:00:02.1: debug port 1 [ 0.488696] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.488717] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000 [ 0.500025] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.500127] usb usb1: configuration #1 chosen from 1 choice [ 0.500164] hub 1-0:1.0: USB hub found [ 0.500174] hub 1-0:1.0: 10 ports detected [ 0.500267] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.500624] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 0.500629] alloc irq_desc for 20 on node 0 [ 0.500631] alloc kstat_irqs on node 0 [ 0.500639] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 0.500658] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.500661] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.500711] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.500737] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfebff000 [ 0.516750] Freeing initrd memory: 7711k freed [ 0.562103] usb usb2: configuration #1 chosen from 1 choice [ 0.562131] hub 2-0:1.0: USB hub found [ 0.562140] hub 2-0:1.0: 10 ports detected [ 0.562217] uhci_hcd: USB Universal Host Controller Interface driver [ 0.562316] PNP: No PS/2 controller found. Probing ports directly. [ 0.810509] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.810609] mice: PS/2 mouse device common for all mice [ 0.810722] rtc_cmos 00:04: RTC can wake from S4 [ 0.810773] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.810797] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.810939] device-mapper: uevent: version 1.0.3 [ 0.811202] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.811280] device-mapper: multipath: version 1.1.0 loaded [ 0.811283] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.811467] cpuidle: using governor ladder [ 0.811469] cpuidle: using governor menu [ 0.811911] TCP cubic registered [ 0.812065] NET: Registered protocol family 10 [ 0.812627] lo: Disabled Privacy Extensions [ 0.812950] NET: Registered protocol family 17 [ 0.812992] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [ 0.813047] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 [ 0.813050] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa [ 0.813052] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 0.813193] PM: Resume from disk failed. [ 0.813207] registered taskstats version 1 [ 0.813479] Magic number: 14:951:840 [ 0.813590] rtc_cmos 00:04: setting system clock to 2010-02-08 15:50:55 UTC (1265644255) [ 0.813594] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.813595] EDD information not available. [ 0.970041] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.970115] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.007101] ata3.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133 [ 1.007104] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.022924] ata1.00: ATA-7: ST3160812AS, 3.AAH, max UDMA/133 [ 1.022927] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.040617] ata3.00: configured for UDMA/133 [ 1.114575] ata1.00: configured for UDMA/133 [ 1.114693] scsi 0:0:0:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5 [ 1.114872] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.114920] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.114972] sd 0:0:0:0: [sda] Write Protect is off [ 1.114976] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.115001] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.115212] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 1.219847] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.280024] usb 2-5: new low speed USB device using ohci_hcd and address 2 [ 1.440024] ata2: SATA link down (SStatus 0 SControl 300) [ 1.440122] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 1.440250] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.440256] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.440309] sd 2:0:0:0: [sdb] Write Protect is off [ 1.440311] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.440337] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.440477] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 [ 1.507105] usb 2-5: configuration #1 chosen from 1 choice [ 1.514550] sdb11 > [ 1.515015] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.860023] usb 2-8: new full speed USB device using ohci_hcd and address 3 [ 1.930025] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.950120] ata4.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100 [ 1.990129] ata4.00: configured for UDMA/100 [ 1.992005] scsi 3:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L08 PQ: 0 ANSI: 5 [ 1.997493] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.997496] Uniform CD-ROM driver Revision: 3.20 [ 1.997615] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.997667] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 2.040046] usb 2-8: device descriptor read/64, error -62 [ 2.170263] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S202J, SB01, max UDMA/66 [ 2.170289] ata6: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc500) ACPI=0x1f01f (30:600:0x13) [ 2.210213] ata6.00: configured for UDMA/66 [ 2.211139] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202J SB01 PQ: 0 ANSI: 5 [ 2.214456] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.214548] sr 5:0:0:0: Attached scsi CD-ROM sr1 [ 2.214593] sr 5:0:0:0: Attached scsi generic sg3 type 5 [ 2.214618] Freeing unused kernel memory: 884k freed [ 2.215108] Write protecting the kernel read-only data: 7900k [ 2.233174] udev: starting version 149 [ 2.330057] usb 2-8: device descriptor read/64, error -62 [ 2.335292] Floppy drive(s): fd0 is 1.44M [ 2.344840] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2.345311] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 2.345319] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 2.345325] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 2.345424] nv_probe: set workaround bit for reversed mac addr [ 2.357793] FDC 0 is a post-1991 82077 [ 2.394077] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 2.394087] alloc irq_desc for 18 on node 0 [ 2.394090] alloc kstat_irqs on node 0 [ 2.394101] b43-pci-bridge 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 2.397615] ssb: Sonics Silicon Backplane found on PCI device 0000:01:0a.0 [ 2.620052] usb 2-8: new full speed USB device using ohci_hcd and address 4 [ 2.754112] EXT4-fs (sda8): INFO: recovery required on readonly filesystem [ 2.754118] EXT4-fs (sda8): write access will be enabled during recovery [ 2.800058] usb 2-8: device descriptor read/64, error -62 [ 2.870850] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:15:58:0d:52:cb [ 2.870855] forcedeth 0000:00:0a.0: highdma csum lnktim desc-v3 [ 3.090023] usb 2-8: device descriptor read/64, error -62 [ 3.380054] usb 2-8: new full speed USB device using ohci_hcd and address 5 [ 3.800024] usb 2-8: device not accepting address 5, error -62 [ 3.980019] usb 2-8: new full speed USB device using ohci_hcd and address 6 [ 4.019013] EXT4-fs (sda8): orphan cleanup on readonly fs [ 4.019022] EXT4-fs (sda8): ext4_orphan_cleanup: deleting unreferenced inode 1962355 [ 4.019059] EXT4-fs (sda8): 1 orphan inode deleted [ 4.019063] EXT4-fs (sda8): recovery complete [ 4.286494] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 4.400026] usb 2-8: device not accepting address 6, error -62 [ 4.400045] hub 2-0:1.0: unable to enumerate USB device on port 8 [ 4.740045] usb 2-10: new low speed USB device using ohci_hcd and address 7 [ 4.976050] usb 2-10: string descriptor 0 read error: -32 [ 4.976174] usb 2-10: configuration #1 chosen from 1 choice [ 10.647424] Adding 9767480k swap on /dev/sda7. Priority:-1 extents:1 across:9767480k [ 10.655831] udev: starting version 149 [ 10.720782] lp: driver loaded but no devices found [ 10.746804] i2c i2c-0: nForce2 SMBus adapter at 0xf800 [ 10.746852] i2c i2c-1: nForce2 SMBus adapter at 0xf400 [ 10.779140] vga16fb: initializing [ 10.779146] vga16fb: mapped to 0xffff8800000a0000 [ 10.779277] fb0: VGA16 VGA frame buffer device [ 10.970796] type=1505 audit(1265644265.648:2): operation="profile_load" pid=873 name="/sbin/dhclient3" [ 10.971104] type=1505 audit(1265644265.648:3): operation="profile_load" pid=873 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.971282] type=1505 audit(1265644265.648:4): operation="profile_load" pid=873 name="/usr/lib/connman/scripts/dhclient-script" [ 10.993317] nvidia: module license 'NVIDIA' taints kernel. [ 10.993324] Disabling lock debugging due to kernel taint [ 11.357905] EDAC MC: Ver: 2.1.0 Feb 5 2010 [ 11.358316] cfg80211: Calling CRDA to update world regulatory domain [ 11.399379] b43-phy0: Broadcom 4306 WLAN found (core revision 5) [ 11.412172] parport_pc 00:0a: reported by Plug and Play ACPI [ 11.412215] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 11.492747] lp0: using parport0 (interrupt-driven). [ 11.578338] usbcore: registered new interface driver hiddev [ 11.581132] EDAC amd64_edac: Ver: 3.2.0 Feb 5 2010 [ 11.581269] EDAC amd64: ECC is enabled by BIOS. [ 11.581312] EDAC MC: Rev E or earlier detected [ 11.581407] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 [ 11.581432] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 11.582333] nvidia 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 11.582343] nvidia 0000:05:00.0: setting latency timer to 64 [ 11.582632] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.53 Wed Dec 9 15:29:46 PST 2009 [ 11.600205] cfg80211: World regulatory domain updated: [ 11.600209] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.600212] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.600214] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.600217] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.600219] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.600222] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.604210] generic-usb 0003:0001:0000.0003: hiddev96,hidraw0: USB HID v1.00 Device [HID 0001:0000] on usb-0000:00:02.0-10/input0 [ 11.604252] usbcore: registered new interface driver usbhid [ 11.604255] usbhid: v2.6:USB HID core driver [ 11.636386] phy0: Selected rate control algorithm 'minstrel' [ 11.637248] Registered led device: b43-phy0::tx [ 11.637269] Registered led device: b43-phy0::rx [ 11.637287] Registered led device: b43-phy0::radio [ 11.637381] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 11.653786] ppdev: user-space parallel port driver [ 11.710069] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 11.730542] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 11.730550] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 11.730622] Intel ICH 0000:00:04.0: setting latency timer to 64 [ 11.740191] Console: switching to colour frame buffer device 80x30 [ 11.794529] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 11.794724] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input3 [ 11.794868] logitech 0003:046D:C512.0001: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-5/input0 [ 11.811899] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.1/input/input4 [ 11.812067] logitech 0003:046D:C512.0002: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-5/input1 [ 11.857314] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 11.884195] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 12.020033] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 12.080049] intel8x0_measure_ac97_clock: measured 60393 usecs (2960 samples) [ 12.080054] intel8x0: clocking to 47008 [ 12.143695] type=1505 audit(1265644266.828:5): operation="profile_load" pid=1277 name="/usr/share/gdm/guest-session/Xsession" [ 12.146026] type=1505 audit(1265644266.828:6): operation="profile_replace" pid=1278 name="/sbin/dhclient3" [ 12.146340] type=1505 audit(1265644266.828:7): operation="profile_replace" pid=1278 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.146531] type=1505 audit(1265644266.828:8): operation="profile_replace" pid=1278 name="/usr/lib/connman/scripts/dhclient-script" [ 12.152741] type=1505 audit(1265644266.838:9): operation="profile_load" pid=1279 name="/usr/bin/evince" [ 12.158225] type=1505 audit(1265644266.838:10): operation="profile_load" pid=1279 name="/usr/bin/evince-previewer" [ 12.163404] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.170800] type=1505 audit(1265644266.848:11): operation="profile_load" pid=1279 name="/usr/bin/evince-thumbnailer"