[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-43-generic (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #97-Ubuntu SMP Wed Sep 5 16:42:26 UTC 2012 (Ubuntu 2.6.32-43.97-generic 2.6.32.59+drm33.24) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-43-generic root=UUID=3c1105de-07f7-483c-a0ed-cb13fecdc0ee ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00BFF00000 mask FFFFF00000 uncachable [ 0.000000] 3 base 0100000000 mask FF00000000 write-back [ 0.000000] 4 base 0200000000 mask FFC0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000240000000 aka 9216M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009c400 (usable) [ 0.000000] modified: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] modified: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfee0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfee0000 page 4k [ 0.000000] kernel direct mapping tables up to bfee0000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0240000000 page 2M [ 0.000000] kernel direct mapping tables up to 240000000 @ 13000-1d000 [ 0.000000] RAMDISK: 37238000 - 37fef415 [ 0.000000] ACPI: RSDP 00000000000f6fd0 00024 (v02 Nvidia) [ 0.000000] ACPI: XSDT 00000000bfee3100 00044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000bfee9cc0 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000bfee3280 069F9 (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bfee0000 00040 [ 0.000000] ACPI: HPET 00000000bfee9ec0 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000bfee9f40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000bfee9e00 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000240000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [0000000000018000 - 000000000001cfff] [ 0.000000] bootmap [000000000001d000 - 0000000000064fff] pages 48 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0240000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a37a44] TEXT DATA BSS ==> [0001000000 - 0001a37a44] [ 0.000000] #3 [0037238000 - 0037fef415] RAMDISK ==> [0037238000 - 0037fef415] [ 0.000000] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000] [ 0.000000] #5 [0001a38000 - 0001a3814d] BRK ==> [0001a38000 - 0001a3814d] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 0000018000] PGTABLE ==> [0000013000 - 0000018000] [ 0.000000] found SMP MP-table at [ffff8800000f5430] f5430 [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bfee0 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 2096748 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 110 pages reserved [ 0.000000] DMA zone: 3814 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767768 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000 [ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000 [ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000 [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91608 r8192 d23080 u1048576 [ 0.000000] pcpu-alloc: s91608 r8192 d23080 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064382 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-43-generic root=UUID=3c1105de-07f7-483c-a0ed-cb13fecdc0ee ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 41b0000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 8181676k/9437184k available (5439k kernel code, 1050192k absent, 205316k reserved, 2987k data, 884k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3014.783 MHz processor. [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6029.56 BogoMIPS (lpj=30147830) [ 0.000022] Security Framework initialized [ 0.000038] AppArmor: AppArmor initialized [ 0.000587] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.013594] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.015516] Mount-cache hash table entries: 256 [ 0.015629] Initializing cgroup subsys ns [ 0.015632] Initializing cgroup subsys cpuacct [ 0.015635] Initializing cgroup subsys memory [ 0.015642] Initializing cgroup subsys devices [ 0.015644] Initializing cgroup subsys freezer [ 0.015645] Initializing cgroup subsys net_cls [ 0.015661] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.015663] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.015665] CPU 0/0x0 -> Node 0 [ 0.015666] tseg: 00bff00000 [ 0.015668] CPU: Physical Processor ID: 0 [ 0.015669] CPU: Processor Core ID: 0 [ 0.015671] mce: CPU supports 5 MCE banks [ 0.015680] using C1E aware idle routine [ 0.015681] Performance Events: AMD PMU driver. [ 0.015685] ... version: 0 [ 0.015686] ... bit width: 48 [ 0.015687] ... generic registers: 4 [ 0.015688] ... value mask: 0000ffffffffffff [ 0.015689] ... max period: 00007fffffffffff [ 0.015691] ... fixed-purpose events: 0 [ 0.015692] ... event mask: 000000000000000f [ 0.016844] ACPI: Core revision 20090903 [ 0.025563] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.025567] ftrace: allocating 22589 entries in 89 pages [ 0.030072] Setting APIC routing to flat [ 0.030372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.130572] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.290097] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.290111] Brought up 2 CPUs [ 0.290112] Total of 2 processors activated (12060.49 BogoMIPS). [ 0.290506] CPU0 attaching sched-domain: [ 0.290510] domain 0: span 0-1 level MC [ 0.290512] groups: 0 1 [ 0.290516] CPU1 attaching sched-domain: [ 0.290517] domain 0: span 0-1 level MC [ 0.290519] groups: 1 0 [ 0.290576] devtmpfs: initialized [ 0.290576] regulator: core version 0.5 [ 0.290576] Time: 23:59:49 Date: 09/27/12 [ 0.290576] NET: Registered protocol family 16 [ 0.290576] node 0 link 0: io port [8000, ffff] [ 0.290576] TOM: 00000000c0000000 aka 3072M [ 0.290576] node 0 link 0: mmio [a0000, bffff] [ 0.290576] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.290576] node 0 link 0: mmio [c0000000, dfffffff] [ 0.290576] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.290576] node 0 link 0: mmio [e0000000, e05fffff] [ 0.290576] TOM2: 0000000240000000 aka 9216M [ 0.290576] bus: [00,05] on node 0 link 0 [ 0.290576] bus: 00 index 0 io port: [0, ffff] [ 0.290576] bus: 00 index 1 mmio: [a0000, bffff] [ 0.290576] bus: 00 index 2 mmio: [fe030000, ffffffff] [ 0.290576] bus: 00 index 3 mmio: [c0000000, efffffff] [ 0.290576] bus: 00 index 4 mmio: [f0000000, fe02ffff] [ 0.290576] bus: 00 index 5 mmio: [240000000, fcffffffff] [ 0.290576] ACPI: bus type pci registered [ 0.290576] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.290576] PCI: MCFG area at e0000000 reserved in E820 [ 0.297426] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.297428] PCI: Using configuration type 1 for base access [ 0.297969] Trying to unpack rootfs image as initramfs... [ 0.300041] bio: create slab at 0 [ 0.300676] ACPI: EC: Look up EC in DSDT [ 0.306717] ACPI: Interpreter enabled [ 0.306719] ACPI: (supports S0 S1 S3 S4 S5) [ 0.306738] ACPI: Using IOAPIC for interrupt routing [ 0.312543] ACPI: No dock devices found. [ 0.312621] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.312726] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc1f] [ 0.312733] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.312735] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.312746] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.312748] pci 0000:00:01.1: PME# disabled [ 0.312764] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.312779] pci 0000:00:02.0: supports D1 D2 [ 0.312780] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.312783] pci 0000:00:02.0: PME# disabled [ 0.312797] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 0.312817] pci 0000:00:02.1: supports D1 D2 [ 0.312818] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.312821] pci 0000:00:02.1: PME# disabled [ 0.312843] pci 0000:00:06.0: reg 20 io port: [0xe800-0xe80f] [ 0.312864] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7] [ 0.312867] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3] [ 0.312869] pci 0000:00:07.0: reg 18 io port: [0x970-0x977] [ 0.312872] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73] [ 0.312875] pci 0000:00:07.0: reg 20 io port: [0xd400-0xd40f] [ 0.312878] pci 0000:00:07.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.312897] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7] [ 0.312899] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3] [ 0.312902] pci 0000:00:08.0: reg 18 io port: [0x960-0x967] [ 0.312905] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63] [ 0.312908] pci 0000:00:08.0: reg 20 io port: [0xc000-0xc00f] [ 0.312911] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.312939] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.312942] pci 0000:00:0a.0: reg 14 io port: [0xbc00-0xbc07] [ 0.312956] pci 0000:00:0a.0: supports D1 D2 [ 0.312957] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.312960] pci 0000:00:0a.0: PME# disabled [ 0.312988] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.312990] pci 0000:00:0b.0: PME# disabled [ 0.313018] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.313020] pci 0000:00:0c.0: PME# disabled [ 0.313048] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.313050] pci 0000:00:0d.0: PME# disabled [ 0.313077] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.313078] pci 0000:00:0e.0: PME# disabled [ 0.313158] pci 0000:01:01.0: reg 10 32bit mmio: [0xfdfff000-0xfdfff7ff] [ 0.313163] pci 0000:01:01.0: reg 14 io port: [0xac00-0xac7f] [ 0.313211] pci 0000:01:07.0: reg 10 io port: [0xa800-0xa8ff] [ 0.313241] pci 0000:01:07.0: supports D1 D2 [ 0.313260] pci 0000:00:09.0: transparent bridge [ 0.313263] pci 0000:00:09.0: bridge io port: [0xa000-0xafff] [ 0.313265] pci 0000:00:09.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.313337] pci 0000:04:00.0: reg 10 32bit mmio: [0xf8000000-0xf9ffffff] [ 0.313344] pci 0000:04:00.0: reg 14 64bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.313350] pci 0000:04:00.0: reg 1c 64bit mmio pref: [0xdc000000-0xdfffffff] [ 0.313354] pci 0000:04:00.0: reg 24 io port: [0x9c00-0x9c7f] [ 0.313359] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] [ 0.313410] pci 0000:04:00.1: reg 10 32bit mmio: [0xfbffc000-0xfbffffff] [ 0.313477] pci 0000:00:0d.0: bridge io port: [0x9000-0x9fff] [ 0.313479] pci 0000:00:0d.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.313481] pci 0000:00:0d.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.313501] pci 0000:05:00.0: reg 10 32bit mmio: [0xf4000000-0xf5ffffff] [ 0.313507] pci 0000:05:00.0: reg 14 64bit mmio pref: [0xc0000000-0xc7ffffff] [ 0.313513] pci 0000:05:00.0: reg 1c 64bit mmio pref: [0xcc000000-0xcfffffff] [ 0.313517] pci 0000:05:00.0: reg 24 io port: [0x8c00-0x8c7f] [ 0.313520] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xf7f00000-0xf7f7ffff] [ 0.313567] pci 0000:05:00.1: reg 10 32bit mmio: [0xf7ffc000-0xf7ffffff] [ 0.313630] pci 0000:00:0e.0: bridge io port: [0x8000-0x8fff] [ 0.313632] pci 0000:00:0e.0: bridge 32bit mmio: [0xf4000000-0xf7ffffff] [ 0.313635] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.313644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.313828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.341104] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.341208] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.341312] ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.341415] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.341517] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.341623] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.341726] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.341829] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.341931] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.342033] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.342136] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.342239] ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.342340] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.342450] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.342560] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.342668] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.342786] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.342901] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.343016] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.343131] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.343203] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.343324] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.343444] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.343565] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.343689] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 0.343810] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.343931] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.344053] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.344178] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.344308] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.344440] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.344568] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.344658] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none [ 0.344662] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.344664] vgaarb: loaded [ 0.344740] SCSI subsystem initialized [ 0.344809] libata version 3.00 loaded. [ 0.344863] usbcore: registered new interface driver usbfs [ 0.344871] usbcore: registered new interface driver hub [ 0.344888] usbcore: registered new device driver usb [ 0.344984] ACPI: WMI: Mapper loaded [ 0.344985] PCI: Using ACPI for IRQ routing [ 0.345092] NetLabel: Initializing [ 0.345093] NetLabel: domain hash size = 128 [ 0.345094] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.345104] NetLabel: unlabeled traffic allowed by default [ 0.345128] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.345132] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.345135] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.350093] Switching to clocksource hpet [ 0.351310] AppArmor: AppArmor Filesystem Enabled [ 0.351325] pnp: PnP ACPI init [ 0.351338] ACPI: bus type pnp registered [ 0.354568] pnp: PnP ACPI: found 13 devices [ 0.354569] ACPI: ACPI bus type pnp unregistered [ 0.354578] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.354580] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.354582] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.354584] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.354586] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.354588] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.354592] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.354594] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.354596] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.354602] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.354608] system 00:0c: iomem range 0xd7c00-0xd7fff has been reserved [ 0.354610] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.354612] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.354614] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.354616] system 00:0c: iomem range 0xfefff000-0xfefff0ff has been reserved [ 0.354618] system 00:0c: iomem range 0xbfee0000-0xbfefffff could not be reserved [ 0.354620] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.354625] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.354627] system 00:0c: iomem range 0x100000-0xbfedffff could not be reserved [ 0.354629] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.354631] system 00:0c: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.354633] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.354635] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.354637] system 00:0c: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.354639] system 00:0c: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.359293] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.359295] pci 0000:00:09.0: IO window: 0xa000-0xafff [ 0.359297] pci 0000:00:09.0: MEM window: 0xfdf00000-0xfdffffff [ 0.359299] pci 0000:00:09.0: PREFETCH window: disabled [ 0.359302] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.359303] pci 0000:00:0b.0: IO window: disabled [ 0.359305] pci 0000:00:0b.0: MEM window: disabled [ 0.359307] pci 0000:00:0b.0: PREFETCH window: disabled [ 0.359309] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.359310] pci 0000:00:0c.0: IO window: disabled [ 0.359312] pci 0000:00:0c.0: MEM window: disabled [ 0.359314] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.359318] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 [ 0.359320] pci 0000:00:0d.0: IO window: 0x9000-0x9fff [ 0.359322] pci 0000:00:0d.0: MEM window: 0xf8000000-0xfbffffff [ 0.359325] pci 0000:00:0d.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.359328] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05 [ 0.359329] pci 0000:00:0e.0: IO window: 0x8000-0x8fff [ 0.359332] pci 0000:00:0e.0: MEM window: 0xf4000000-0xf7ffffff [ 0.359334] pci 0000:00:0e.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.359340] pci 0000:00:09.0: setting latency timer to 64 [ 0.359344] pci 0000:00:0b.0: setting latency timer to 64 [ 0.359348] pci 0000:00:0c.0: setting latency timer to 64 [ 0.359351] pci 0000:00:0d.0: setting latency timer to 64 [ 0.359355] pci 0000:00:0e.0: setting latency timer to 64 [ 0.359358] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.359359] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.359362] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.359363] pci_bus 0000:01: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.359365] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.359367] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.359369] pci_bus 0000:04: resource 0 io: [0x9000-0x9fff] [ 0.359371] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.359372] pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.359374] pci_bus 0000:05: resource 0 io: [0x8000-0x8fff] [ 0.359376] pci_bus 0000:05: resource 1 mem: [0xf4000000-0xf7ffffff] [ 0.359378] pci_bus 0000:05: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.359405] NET: Registered protocol family 2 [ 0.359592] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.361234] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.364404] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.364750] TCP: Hash tables configured (established 524288 bind 65536) [ 0.364752] TCP reno registered [ 0.364825] NET: Registered protocol family 1 [ 0.365087] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.365090] alloc irq_desc for 23 on node 0 [ 0.365092] alloc kstat_irqs on node 0 [ 0.365100] pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.440010] pci 0000:00:02.0: PCI INT A disabled [ 0.440196] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.440197] alloc irq_desc for 22 on node 0 [ 0.440199] alloc kstat_irqs on node 0 [ 0.440203] pci 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.440218] pci 0000:00:02.1: PCI INT B disabled [ 0.440254] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.440258] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 0.440264] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.440266] pci 0000:00:0b.0: Linking AER extended capability [ 0.440294] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.440298] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 0.440304] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.440305] pci 0000:00:0c.0: Linking AER extended capability [ 0.440336] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.440339] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 0.440345] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.440347] pci 0000:00:0d.0: Linking AER extended capability [ 0.440379] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.440383] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 0.440389] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.440390] pci 0000:00:0e.0: Linking AER extended capability [ 0.440420] pci 0000:05:00.0: Boot video device [ 0.441055] PCI-DMA: Disabling AGP. [ 0.441123] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.441124] PCI-DMA: using GART IOMMU. [ 0.441127] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.441729] Scanning for low memory corruption every 60 seconds [ 0.441823] audit: initializing netlink socket (disabled) [ 0.441833] type=2000 audit(1348790388.440:1): initialized [ 0.448417] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.449478] VFS: Disk quotas dquot_6.5.2 [ 0.449517] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.449978] fuse init (API version 7.13) [ 0.450070] msgmni has been set to 15979 [ 0.450218] alg: No test for stdrng (krng) [ 0.450257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.450259] io scheduler noop registered [ 0.450260] io scheduler anticipatory registered [ 0.450262] io scheduler deadline registered [ 0.450311] io scheduler cfq registered (default) [ 0.450420] alloc irq_desc for 24 on node 0 [ 0.450422] alloc kstat_irqs on node 0 [ 0.450428] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X [ 0.450432] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.450498] alloc irq_desc for 25 on node 0 [ 0.450499] alloc kstat_irqs on node 0 [ 0.450502] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X [ 0.450505] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.450572] alloc irq_desc for 26 on node 0 [ 0.450573] alloc kstat_irqs on node 0 [ 0.450576] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X [ 0.450579] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.450643] alloc irq_desc for 27 on node 0 [ 0.450644] alloc kstat_irqs on node 0 [ 0.450647] pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X [ 0.450650] pcieport 0000:00:0e.0: setting latency timer to 64 [ 0.450692] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.450710] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.450785] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.450787] ACPI: Power Button [PWRB] [ 0.450831] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.450833] ACPI: Power Button [PWRF] [ 0.450869] fan PNP0C0B:00: registered as cooling_device0 [ 0.450873] ACPI: Fan [FAN] (on) [ 0.451222] processor LNXCPU:00: registered as cooling_device1 [ 0.451250] processor LNXCPU:01: registered as cooling_device2 [ 0.454448] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.454454] ACPI: Thermal Zone [THRM] (40 C) [ 0.455463] Linux agpgart interface v0.103 [ 0.455489] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.455569] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.455785] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.456505] brd: module loaded [ 0.456844] loop: module loaded [ 0.456904] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.457072] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.457378] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 0.457382] alloc irq_desc for 21 on node 0 [ 0.457383] alloc kstat_irqs on node 0 [ 0.457390] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21 [ 0.457408] pata_acpi 0000:00:07.0: setting latency timer to 64 [ 0.457413] pata_acpi 0000:00:07.0: PCI INT A disabled [ 0.457671] Fixed MDIO Bus: probed [ 0.457695] PPP generic driver version 2.4.2 [ 0.457721] tun: Universal TUN/TAP device driver, 1.6 [ 0.457723] tun: (C) 1999-2004 Max Krasnyansky [ 0.457775] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.457803] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.457821] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.457823] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.457847] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.457878] ehci_hcd 0000:00:02.1: debug port 1 [ 0.457882] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.457898] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000 [ 0.470010] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.470070] usb usb1: configuration #1 chosen from 1 choice [ 0.470091] hub 1-0:1.0: USB hub found [ 0.470098] hub 1-0:1.0: 9 ports detected [ 0.470142] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.470171] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.470178] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.470180] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.470204] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.470218] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 0.532055] usb usb2: configuration #1 chosen from 1 choice [ 0.532073] hub 2-0:1.0: USB hub found [ 0.532078] hub 2-0:1.0: 9 ports detected [ 0.532116] uhci_hcd: USB Universal Host Controller Interface driver [ 0.532167] PNP: No PS/2 controller found. Probing ports directly. [ 0.532509] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.532513] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.532563] mice: PS/2 mouse device common for all mice [ 0.532644] rtc_cmos 00:05: RTC can wake from S4 [ 0.532672] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.532694] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.532784] device-mapper: uevent: version 1.0.3 [ 0.532875] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.532926] device-mapper: multipath: version 1.1.0 loaded [ 0.532928] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.533043] cpuidle: using governor ladder [ 0.533044] cpuidle: using governor menu [ 0.533296] TCP cubic registered [ 0.533397] NET: Registered protocol family 10 [ 0.533921] NET: Registered protocol family 17 [ 0.533943] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) [ 0.533950] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 0.533951] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 0.534017] PM: Resume from disk failed. [ 0.534026] registered taskstats version 1 [ 0.534264] Magic number: 12:930:1010 [ 0.534332] rtc_cmos 00:05: setting system clock to 2012-09-27 23:59:49 UTC (1348790389) [ 0.534334] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.534336] EDD information not available. [ 0.536303] Freeing initrd memory: 14045k freed [ 0.542458] Freeing unused kernel memory: 884k freed [ 0.542786] Write protecting the kernel read-only data: 7720k [ 0.555876] udev: starting version 151 [ 0.600416] vga16fb: initializing [ 0.600420] vga16fb: mapped to 0xffff8800000a0000 [ 0.600467] fb0: VGA16 VGA frame buffer device [ 0.617777] sata_nv 0000:00:07.0: version 3.5 [ 0.617790] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21 [ 0.617843] sata_nv 0000:00:07.0: setting latency timer to 64 [ 0.637695] Floppy drive(s): fd0 is 1.44M [ 0.656455] FDC 0 is a post-1991 82077 [ 0.749651] scsi0 : sata_nv [ 0.749924] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 0.749927] alloc irq_desc for 17 on node 0 [ 0.749929] alloc kstat_irqs on node 0 [ 0.749938] ohci1394 0000:01:01.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 0.750086] scsi1 : sata_nv [ 0.750209] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 21 [ 0.750213] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 21 [ 0.750303] pata_amd 0000:00:06.0: version 0.4.1 [ 0.750347] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.750442] scsi2 : pata_amd [ 0.750490] scsi3 : pata_amd [ 0.750970] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14 [ 0.750971] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15 [ 0.751115] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.751310] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 0.751312] alloc irq_desc for 20 on node 0 [ 0.751313] alloc kstat_irqs on node 0 [ 0.751318] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 [ 0.751320] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 0.751348] nv_probe: set workaround bit for reversed mac addr [ 0.807888] Console: switching to colour frame buffer device 80x30 [ 0.816588] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[fdfff000-fdfff7ff] Max Packet=[1024] IR/IT contexts=[4/8] [ 0.930240] ata3.00: ATAPI: SONY DVD RW DRU-720A, JY01, max UDMA/66 [ 0.930259] ata3: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13) [ 0.970183] ata3.00: configured for UDMA/66 [ 1.080011] ata1: SATA link down (SStatus 0 SControl 300) [ 1.280582] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 0, addr 00:1b:fc:30:03:d2 [ 1.280585] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 1.280890] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 1.280893] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 1.280926] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.280962] scsi4 : sata_nv [ 1.281021] scsi5 : sata_nv [ 1.281136] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 23 [ 1.281138] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 23 [ 1.410011] ata2: SATA link down (SStatus 0 SControl 300) [ 1.410770] scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-720A JY01 PQ: 0 ANSI: 5 [ 1.414273] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.414275] Uniform CD-ROM driver Revision: 3.20 [ 1.414353] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.414398] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 1.570011] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 1.772515] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.793039] ata5.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133 [ 1.793041] ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.809064] usb 2-3: configuration #1 chosen from 1 choice [ 1.819590] usbcore: registered new interface driver hiddev [ 1.825264] input: Razer Razer Mamba Charging Dock as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input3 [ 1.825342] generic-usb 0003:1532:000F.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Mamba Charging Dock] on usb-0000:00:02.0-3/input0 [ 1.832329] input: Razer Razer Mamba Charging Dock as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input4 [ 1.832374] generic-usb 0003:1532:000F.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Mamba Charging Dock] on usb-0000:00:02.0-3/input1 [ 1.832387] usbcore: registered new interface driver usbhid [ 1.832389] usbhid: v2.6:USB HID core driver [ 1.833085] ata5.00: configured for UDMA/133 [ 1.833191] scsi 4:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5 [ 1.833308] sd 4:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.833314] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 1.833342] sd 4:0:0:0: [sda] Write Protect is off [ 1.833345] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.833386] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.833533] sda: sda1 sda2 sda3 < > sda4 [ 1.839605] sda: p2 size 2049452032 exceeds device capacity, limited to end of disk [ 1.839622] sda: p3 ignored, start 2867798014 is behind the end of the disk [ 1.839624] sda: p4 ignored, start 2049658880 is behind the end of the disk [ 1.839773] sd 4:0:0:0: [sda] Attached SCSI disk [ 2.140163] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000000000000000] [ 2.152510] usb 2-4: new full speed USB device using ohci_hcd and address 3 [ 2.322514] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.343654] ata6.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133 [ 2.343656] ata6.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.376069] usb 2-4: configuration #1 chosen from 1 choice [ 2.379058] hub 2-4:1.0: USB hub found [ 2.380737] ata6.00: configured for UDMA/133 [ 2.380815] scsi 5:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5 [ 2.380920] sd 5:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 2.380926] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 2.380956] sd 5:0:0:0: [sdb] Write Protect is off [ 2.380958] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.381028] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.381163] sdb: [ 2.382018] hub 2-4:1.0: 4 ports detected [ 2.391554] sdb1 sdb2 sdb3 [ 2.391594] sdb: p2 size 1476007936 exceeds device capacity, limited to end of disk [ 2.391612] sdb: p3 ignored, start 1476214784 is behind the end of the disk [ 2.391745] sd 5:0:0:0: [sdb] Attached SCSI disk [ 2.742561] usb 2-7: new full speed USB device using ohci_hcd and address 4 [ 2.960335] device-mapper: ioctl: device doesn't appear to be in the dev hash table. [ 2.967094] usb 2-7: configuration #1 chosen from 1 choice [ 3.312515] usb 2-8: new full speed USB device using ohci_hcd and address 5 [ 3.434662] xor: automatically using best checksumming function: generic_sse [ 3.482505] generic_sse: 9286.800 MB/sec [ 3.482507] xor: using function: generic_sse (9286.800 MB/sec) [ 3.484350] device-mapper: dm-raid45: initialized v0.2594b [ 3.542102] usb 2-8: configuration #1 chosen from 1 choice [ 3.549575] Initializing USB Mass Storage driver... [ 3.549656] scsi6 : SCSI emulation for USB Mass Storage devices [ 3.549747] usbcore: registered new interface driver usb-storage [ 3.549748] USB Mass Storage support registered. [ 3.549979] usb-storage: device found at 5 [ 3.549980] usb-storage: waiting for device to settle before scanning [ 3.588968] EXT4-fs (dm-4): mounted filesystem with ordered data mode [ 3.624022] usb 2-4.1: new low speed USB device using ohci_hcd and address 6 [ 3.749091] usb 2-4.1: configuration #1 chosen from 1 choice [ 3.760241] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.1/2-4.1:1.0/input/input5 [ 3.760294] generic-usb 0003:046D:C226.0003: input,hidraw2: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:02.0-4.1/input0 [ 3.775053] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.1/2-4.1:1.1/input/input6 [ 3.775135] generic-usb 0003:046D:C226.0004: input,hiddev96,hidraw3: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:02.0-4.1/input1 [ 3.854019] usb 2-4.3: new low speed USB device using ohci_hcd and address 7 [ 3.981115] usb 2-4.3: configuration #1 chosen from 1 choice [ 3.991228] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.3/2-4.3:1.0/input/input7 [ 3.991289] generic-usb 0003:046D:C00E.0005: input,hidraw4: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-4.3/input0 [ 4.074020] usb 2-4.4: new full speed USB device using ohci_hcd and address 8 [ 4.205094] usb 2-4.4: configuration #1 chosen from 1 choice [ 4.232101] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4.4/2-4.4:1.0/input/input8 [ 4.232182] generic-usb 0003:046D:C227.0006: input,hiddev97,hidraw5: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:02.0-4.4/input0 [ 7.044700] udev: starting version 151 [ 7.079551] Adding 31250040k swap on /dev/mapper/nvidia_afcicgca5. Priority:-1 extents:1 across:31250040k [ 7.114860] lp: driver loaded but no devices found [ 7.126849] EDAC MC: Ver: 2.1.0 Sep 5 2012 [ 7.134816] ACPI: resource nForce2_smbus [0x4c00-0x4c3f] conflicts with ACPI region SM00 [0x4c00-0x4c05] [ 7.134819] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.134822] nForce2_smbus 0000:00:01.1: Error probing SMB1. [ 7.134869] i2c i2c-0: nForce2 SMBus adapter at 0x4c40 [ 7.151856] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 7.253735] type=1505 audit(1348815596.218:2): operation="profile_load" pid=756 name="/sbin/dhclient3" [ 7.253939] type=1505 audit(1348815596.218:3): operation="profile_load" pid=756 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.254057] type=1505 audit(1348815596.218:4): operation="profile_load" pid=756 name="/usr/lib/connman/scripts/dhclient-script" [ 7.307994] nvidia: module license 'NVIDIA' taints kernel. [ 7.307997] Disabling lock debugging due to kernel taint [ 7.584256] type=1505 audit(1348815596.548:5): operation="profile_replace" pid=1008 name="/sbin/dhclient3" [ 7.584468] type=1505 audit(1348815596.548:6): operation="profile_replace" pid=1008 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.584589] type=1505 audit(1348815596.548:7): operation="profile_replace" pid=1008 name="/usr/lib/connman/scripts/dhclient-script" [ 7.586376] type=1505 audit(1348815596.548:8): operation="profile_load" pid=1007 name="/usr/share/gdm/guest-session/Xsession" [ 7.596346] type=1505 audit(1348815596.558:9): operation="profile_load" pid=1009 name="/usr/bin/evince" [ 7.596883] EDAC amd64_edac: Ver: 3.2.0 Sep 5 2012 [ 7.599410] type=1505 audit(1348815596.558:10): operation="profile_load" pid=1011 name="/usr/lib/cups/backend/cups-pdf" [ 7.599666] type=1505 audit(1348815596.558:11): operation="profile_load" pid=1011 name="/usr/sbin/cupsd" [ 7.722895] parport_pc 00:0a: reported by Plug and Play ACPI [ 7.722919] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 7.804310] lp0: using parport0 (interrupt-driven). [ 7.849193] eth0: link down. [ 7.860653] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 7.860662] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 7.860663] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 7.860664] (Note that use of the override may cause unknown side effects.) [ 7.860711] C-Media PCI 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 7.860873] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 7.871801] ppdev: user-space parallel port driver [ 7.883704] nvidia 0000:04:00.0: enabling device (0000 -> 0003) [ 7.883880] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 7.883884] alloc irq_desc for 19 on node 0 [ 7.883885] alloc kstat_irqs on node 0 [ 7.883892] nvidia 0000:04:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 7.883899] nvidia 0000:04:00.0: setting latency timer to 64 [ 7.883903] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none [ 7.884053] NVRM: The NVIDIA GPU 04:00.0 (PCI ID: 10de:1244) installed [ 7.884054] NVRM: in this system is not supported by the 195.36.24 NVIDIA Linux [ 7.884055] NVRM: graphics driver release. Please see 'Appendix A - [ 7.884056] NVRM: Supported NVIDIA GPU Products' in this release's README, [ 7.884057] NVRM: available on the Linux graphics driver download page at [ 7.884057] NVRM: www.nvidia.com. [ 7.884075] nvidia: probe of 0000:04:00.0 failed with error -1 [ 7.884225] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 7.884227] alloc irq_desc for 18 on node 0 [ 7.884228] alloc kstat_irqs on node 0 [ 7.884233] nvidia 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 7.884237] nvidia 0000:05:00.0: setting latency timer to 64 [ 7.884239] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 7.884257] NVRM: The NVIDIA GPU 05:00.0 (PCI ID: 10de:1244) installed [ 7.884258] NVRM: in this system is not supported by the 195.36.24 NVIDIA Linux [ 7.884259] NVRM: graphics driver release. Please see 'Appendix A - [ 7.884260] NVRM: Supported NVIDIA GPU Products' in this release's README, [ 7.884261] NVRM: available on the Linux graphics driver download page at [ 7.884261] NVRM: www.nvidia.com. [ 7.884270] nvidia: probe of 0000:05:00.0 failed with error -1 [ 7.884295] NVRM: The NVIDIA probe routine failed for 2 device(s). [ 7.884296] NVRM: None of the NVIDIA graphics adapters were initialized! [ 8.100069] nvidia 0000:04:00.0: setting latency timer to 64 [ 8.100077] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=none,decodes=none:owns=none [ 8.105082] nvidia 0000:05:00.0: setting latency timer to 64 [ 8.105089] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=none,decodes=none:owns=none [ 8.105338] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.43 Sun Aug 19 20:14:03 PDT 2012 [ 8.188406] usbcore: registered new interface driver snd-usb-audio [ 8.542063] usb-storage: device scan complete [ 8.549038] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 8.556031] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 8.563029] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 8.570046] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 8.570528] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 8.572038] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 8.581392] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 8.582371] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 8.918031] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 8.951037] sd 6:0:0:2: [sde] Attached SCSI removable disk [ 8.962019] sd 6:0:0:3: [sdf] Attached SCSI removable disk [ 8.984050] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 9.831699] NVRM: GPU at 0000:05:00: GPU-66336cec-ad07-726d-6db8-209c60977ac1 [ 9.960029] eth0: link up. [ 10.687917] NVRM: GPU at 0000:04:00: GPU-06357956-7e0b-e2bc-172f-0888f1b13015 [ 11.255123] eth0: link down. [ 13.316053] eth0: link up. [ 17.862508] eth0: no IPv6 routers present [81467.249845] grub-probe: sending ioctl 1261 to a partition! [81467.265894] grub-probe: sending ioctl 1261 to a partition! [81467.314942] grub-probe: sending ioctl 1261 to a partition! [81467.330891] grub-probe: sending ioctl 1261 to a partition! [81467.464894] grub-probe: sending ioctl 1261 to a partition! [81467.465124] grub-probe: sending ioctl 1261 to a partition! [81467.466725] grub-probe: sending ioctl 1261 to a partition! [81467.466951] grub-probe: sending ioctl 1261 to a partition! [81467.640997] grub-probe: sending ioctl 1261 to a partition! [81467.641240] grub-probe: sending ioctl 1261 to a partition! [81467.991190] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [81467.992377] SGI XFS Quota Management subsystem [81467.996525] JFS: nTxBlock = 8192, nTxLock = 65536 [81468.011204] NTFS driver 2.1.29 [Flags: R/O MODULE]. [81468.022669] QNX4 filesystem 0.2.3 registered. [81468.058586] Btrfs loaded