[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-68-generic (buildd@lgw01-46) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #111-Ubuntu SMP Fri Nov 6 18:17:06 UTC 2015 (Ubuntu 3.13.0-68.111-generic 3.13.11-ckt27) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-68-generic root=UUID=78f184fe-c398-4f35-802c-f6342e6528b6 ro i8042.notimeout i8042.nomux acpi_backlight=vendor quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007b8eefff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b8ef000-0x000000007bddefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007bddf000-0x000000007bfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007bfbf000-0x000000007bffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007bfff000-0x000000007bffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007c000000-0x000000007effffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: FUJITSU LIFEBOOK A555/FJNBB3E, BIOS 1.19A 10/06/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable [ 0.000000] 2 base 00FFA00000 mask 7FFFE00000 write-protect [ 0.000000] 3 base 00FFC00000 mask 7FFFC00000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7b600000-0x7b7fffff] [ 0.000000] [mem 0x7b600000-0x7b7fffff] page 2M [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x78000000-0x7b5fffff] [ 0.000000] [mem 0x78000000-0x7b5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x77ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x77ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x7b800000-0x7b8eefff] [ 0.000000] [mem 0x7b800000-0x7b8eefff] page 4k [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7bfff000-0x7bffffff] [ 0.000000] [mem 0x7bfff000-0x7bffffff] page 4k [ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35b4c000-0x36d9dfff] [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 FUJ ) [ 0.000000] ACPI: XSDT 000000007bffe120 0000B4 (v01 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: FACP 000000007bff5000 00010C (v05 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202) [ 0.000000] ACPI: DSDT 000000007bfe4000 00BEC7 (v02 FUJ FJNBB3E 01130000 FUJ 00000001) [ 0.000000] ACPI: FACS 000000007bfb9000 000040 [ 0.000000] ACPI: UEFI 000000007bffd000 000236 (v01 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: UEFI 000000007bffc000 000042 (v01 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: SSDT 000000007bffa000 000024 (v01 FUJ FjSsdt 01130000 INTL 20121114) [ 0.000000] ACPI: ASF! 000000007bff9000 0000A5 (v32 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: ASPT 000000007bff8000 000034 (v07 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: BOOT 000000007bff7000 000028 (v01 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: DBGP 000000007bff6000 000034 (v01 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: HPET 000000007bff4000 000038 (v01 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: LPIT 000000007bff3000 000094 (v01 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: APIC 000000007bff2000 00008C (v03 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: MCFG 000000007bff1000 00003C (v01 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: WDAT 000000007bff0000 000224 (v01 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: SSDT 000000007bfe3000 000539 (v02 FUJ Cpu0Ist 01130000 INTL 20121114) [ 0.000000] ACPI: SSDT 000000007bfe2000 000B74 (v02 FUJ CpuSsdt 01130000 INTL 20121114) [ 0.000000] ACPI: SSDT 000000007bfdc000 005D5B (v02 FUJ SaSsdt 01130000 INTL 20121114) [ 0.000000] ACPI: CSRT 000000007bfdb000 0000C4 (v01 FUJ PC 01130000 FUJ 00000001) [ 0.000000] ACPI: FPDT 000000007bfda000 000044 (v01 FUJ EDK2 00000002 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007bffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7bffffff] [ 0.000000] NODE_DATA [mem 0x7b8ea000-0x7b8eefff] [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880079000000-ffff88007affffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x7b8eefff] [ 0.000000] node 0: [mem 0x7bfff000-0x7bffffff] [ 0.000000] On node 0 totalpages: 505997 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7872 pages used for memmap [ 0.000000] DMA32 zone: 502000 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b8ef000-0x7bddefff] [ 0.000000] PM: Registered nosave memory: [mem 0x7bddf000-0x7bfbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x7bfbf000-0x7bffefff] [ 0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007b600000 s81536 r8192 d20864 u262144 [ 0.000000] pcpu-alloc: s81536 r8192 d20864 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 498040 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-68-generic root=UUID=78f184fe-c398-4f35-802c-f6342e6528b6 ro i8042.notimeout i8042.nomux acpi_backlight=vendor quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1954944K/2023988K available (7396K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 69044K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:1016 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 8388608 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1995.553 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.10 BogoMIPS (lpj=7982212) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000037] Security Framework initialized [ 0.000057] AppArmor: AppArmor initialized [ 0.000058] Yama: becoming mindful. [ 0.000249] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000724] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000932] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000935] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.001133] Initializing cgroup subsys memory [ 0.001138] Initializing cgroup subsys devices [ 0.001140] Initializing cgroup subsys freezer [ 0.001142] Initializing cgroup subsys blkio [ 0.001143] Initializing cgroup subsys perf_event [ 0.001146] Initializing cgroup subsys hugetlb [ 0.001169] CPU: Physical Processor ID: 0 [ 0.001170] CPU: Processor Core ID: 0 [ 0.001175] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.001175] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002312] mce: CPU supports 7 MCE banks [ 0.002326] CPU0: Thermal monitoring enabled (TM1) [ 0.002336] process: using mwait in idle threads [ 0.002339] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.002339] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0 [ 0.002339] tlb_flushall_shift: 6 [ 0.002755] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.003843] ACPI: Core revision 20131115 [ 0.014201] ACPI: All ACPI Tables successfully acquired [ 0.015760] ftrace: allocating 28593 entries in 112 pages [ 0.030699] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070374] smpboot: CPU0: Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz (fam: 06, model: 3d, stepping: 04) [ 0.070383] TSC deadline timer enabled [ 0.070394] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.070399] ... version: 3 [ 0.070400] ... bit width: 48 [ 0.070401] ... generic registers: 4 [ 0.070402] ... value mask: 0000ffffffffffff [ 0.070403] ... max period: 0000ffffffffffff [ 0.070404] ... fixed-purpose events: 3 [ 0.070405] ... event mask: 000000070000000f [ 0.072281] x86: Booting SMP configuration: [ 0.086601] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072283] .... node #0, CPUs: #1 #2 #3 [ 0.115258] x86: Booted up 1 node, 4 CPUs [ 0.115262] smpboot: Total of 4 processors activated (15964.42 BogoMIPS) [ 0.119707] devtmpfs: initialized [ 0.121622] EVM: security.selinux [ 0.121623] EVM: security.SMACK64 [ 0.121624] EVM: security.ima [ 0.121625] EVM: security.capability [ 0.121680] PM: Registering ACPI NVS region [mem 0x7bddf000-0x7bfbefff] (1966080 bytes) [ 0.122472] pinctrl core: initialized pinctrl subsystem [ 0.122524] regulator-dummy: no parameters [ 0.122554] RTC time: 15:51:03, date: 06/25/17 [ 0.122587] NET: Registered protocol family 16 [ 0.122688] cpuidle: using governor ladder [ 0.122690] cpuidle: using governor menu [ 0.122739] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.122740] ACPI: bus type PCI registered [ 0.122742] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.122795] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.122797] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.142350] PCI: Using configuration type 1 for base access [ 0.142493] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.142494] mtrr: probably your BIOS does not setup all CPUs. [ 0.142494] mtrr: corrected configuration. [ 0.143193] bio: create slab at 0 [ 0.143334] ACPI: Added _OSI(Module Device) [ 0.143336] ACPI: Added _OSI(Processor Device) [ 0.143337] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.143339] ACPI: Added _OSI(Processor Aggregator Device) [ 0.147925] ACPI: Executed 5 blocks of module-level executable AML code [ 0.154329] ACPI: SSDT 000000007bccc918 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20121114) [ 0.154864] ACPI: Dynamic OEM Table Load: [ 0.154866] ACPI: SSDT (null) 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20121114) [ 0.155714] ACPI: SSDT 000000007bccd618 0005AA (v02 PmRef ApIst 00003000 INTL 20121114) [ 0.156319] ACPI: Dynamic OEM Table Load: [ 0.156321] ACPI: SSDT (null) 0005AA (v02 PmRef ApIst 00003000 INTL 20121114) [ 0.159572] ACPI: SSDT 000000007bccbd98 000119 (v02 PmRef ApCst 00003000 INTL 20121114) [ 0.160102] ACPI: Dynamic OEM Table Load: [ 0.160103] ACPI: SSDT (null) 000119 (v02 PmRef ApCst 00003000 INTL 20121114) [ 0.166503] ACPI: Interpreter enabled [ 0.166512] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.166518] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.166539] ACPI: (supports S0 S3 S4 S5) [ 0.166540] ACPI: Using IOAPIC for interrupt routing [ 0.166572] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.166746] ACPI: No dock devices found. [ 0.176257] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.176263] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.176740] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.176742] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.177482] PCI host bridge to bus 0000:00 [ 0.177485] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.177487] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.177491] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.177492] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.177494] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfeafffff] [ 0.177503] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.177631] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.177643] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit] [ 0.177651] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.177656] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.177776] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.177784] pci 0000:00:03.0: reg 0x10: [mem 0xa1410000-0xa1413fff 64bit] [ 0.177935] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.177954] pci 0000:00:14.0: reg 0x10: [mem 0xa1400000-0xa140ffff 64bit] [ 0.178012] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.178099] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.178128] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.178147] pci 0000:00:16.0: reg 0x10: [mem 0xa1419000-0xa141901f 64bit] [ 0.178208] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.178321] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.178339] pci 0000:00:1b.0: reg 0x10: [mem 0xa1414000-0xa1417fff 64bit] [ 0.178397] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.178500] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.178563] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.178647] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.178675] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400 [ 0.178738] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.179389] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.179417] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.179488] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.179598] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.179633] pci 0000:00:1f.0: [8086:9cc5] type 00 class 0x060100 [ 0.179848] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.179863] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.179871] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097] [ 0.179878] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.179885] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093] [ 0.179892] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.179899] pci 0000:00:1f.2: reg 0x24: [mem 0xa141c000-0xa141c7ff] [ 0.179935] pci 0000:00:1f.2: PME# supported from D3hot [ 0.180033] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.180048] pci 0000:00:1f.3: reg 0x10: [mem 0xa1418000-0xa14180ff 64bit] [ 0.180067] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f] [ 0.180186] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.180217] pci 0000:00:1f.6: reg 0x10: [mem 0xa141b000-0xa141bfff 64bit] [ 0.180481] pci 0000:01:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.180498] pci 0000:01:00.0: reg 0x10: [mem 0xa1300000-0xa1300fff] [ 0.180616] pci 0000:01:00.0: supports D1 D2 [ 0.180617] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.180645] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.187513] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.187518] pci 0000:00:1c.0: bridge window [mem 0xa1300000-0xa13fffff] [ 0.187784] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 0.187869] pci 0000:02:00.0: reg 0x10: [mem 0xa1200000-0xa1201fff 64bit] [ 0.188234] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.188273] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.195656] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.195661] pci 0000:00:1c.2: bridge window [mem 0xa1200000-0xa12fffff] [ 0.195733] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.195750] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.195778] pci 0000:03:00.0: reg 0x18: [mem 0xa1100000-0xa1100fff 64bit] [ 0.195797] pci 0000:03:00.0: reg 0x20: [mem 0xa1000000-0xa1003fff 64bit pref] [ 0.195872] pci 0000:03:00.0: supports D1 D2 [ 0.195873] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195905] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.203524] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.203528] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.203531] pci 0000:00:1c.3: bridge window [mem 0xa1100000-0xa11fffff] [ 0.203536] pci 0000:00:1c.3: bridge window [mem 0xa1000000-0xa10fffff 64bit pref] [ 0.204247] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 0.204299] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.204347] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.204395] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.204443] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.204491] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.204541] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.204592] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.205096] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.205103] ACPI: \_SB_.PCI0: notify handler is installed [ 0.205167] Found 1 acpi root devices [ 0.205195] ACPI : EC: GPE = 0x32, I/O: command/status = 0x66, data = 0x62 [ 0.205284] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.205286] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.205289] vgaarb: loaded [ 0.205290] vgaarb: bridge control possible 0000:00:02.0 [ 0.205440] SCSI subsystem initialized [ 0.205486] libata version 3.00 loaded. [ 0.205501] ACPI: bus type USB registered [ 0.205517] usbcore: registered new interface driver usbfs [ 0.205524] usbcore: registered new interface driver hub [ 0.205543] usbcore: registered new device driver usb [ 0.205642] PCI: Using ACPI for IRQ routing [ 0.211408] PCI: pci_cache_line_size set to 64 bytes [ 0.211721] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.211723] e820: reserve RAM buffer [mem 0x7b8ef000-0x7bffffff] [ 0.211799] NetLabel: Initializing [ 0.211800] NetLabel: domain hash size = 128 [ 0.211801] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.211812] NetLabel: unlabeled traffic allowed by default [ 0.211873] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.211879] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.213906] Switched to clocksource hpet [ 0.218514] AppArmor: AppArmor Filesystem Enabled [ 0.218536] pnp: PnP ACPI init [ 0.218549] ACPI: bus type PNP registered [ 0.218638] pnp 00:00: [dma 4] [ 0.218659] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.218678] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.218772] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.218832] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.218835] system 00:03: [io 0xffff] has been reserved [ 0.218837] system 00:03: [io 0xffff] has been reserved [ 0.218838] system 00:03: [io 0xffff] has been reserved [ 0.218840] system 00:03: [io 0x1800-0x18fe] could not be reserved [ 0.218842] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.218844] system 00:03: [io 0xfd00-0xfd7f] has been reserved [ 0.218847] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.218889] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.218924] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.218927] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.218956] pnp 00:06: Plug and Play ACPI device, IDs FUJ0300 PNP0303 (active) [ 0.218982] pnp 00:07: Plug and Play ACPI device, IDs ALP040b PNP0f13 (active) [ 0.219203] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.219205] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.219207] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.219209] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.219211] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.219213] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.219214] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.219216] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.219218] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved [ 0.219220] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.219222] system 00:08: [mem 0x80010000-0x8001ffff] has been reserved [ 0.219224] system 00:08: [mem 0x80000000-0x8000ffff] has been reserved [ 0.219226] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219466] pnp: PnP ACPI: found 9 devices [ 0.219468] ACPI: bus type PNP unregistered [ 0.225379] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.225385] pci 0000:00:1c.0: bridge window [mem 0xa1300000-0xa13fffff] [ 0.225392] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.225396] pci 0000:00:1c.2: bridge window [mem 0xa1200000-0xa12fffff] [ 0.225403] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.225406] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.225410] pci 0000:00:1c.3: bridge window [mem 0xa1100000-0xa11fffff] [ 0.225414] pci 0000:00:1c.3: bridge window [mem 0xa1000000-0xa10fffff 64bit pref] [ 0.225420] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.225422] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.225424] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.225425] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xfeafffff] [ 0.225427] pci_bus 0000:01: resource 1 [mem 0xa1300000-0xa13fffff] [ 0.225429] pci_bus 0000:02: resource 1 [mem 0xa1200000-0xa12fffff] [ 0.225431] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.225432] pci_bus 0000:03: resource 1 [mem 0xa1100000-0xa11fffff] [ 0.225434] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa10fffff 64bit pref] [ 0.225464] NET: Registered protocol family 2 [ 0.225663] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.225704] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.225750] TCP: Hash tables configured (established 16384 bind 16384) [ 0.225769] TCP: reno registered [ 0.225776] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.225784] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.225833] NET: Registered protocol family 1 [ 0.225843] pci 0000:00:02.0: Video device with shadowed ROM [ 0.225933] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.225935] pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 7 [ 0.227229] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.227392] PCI: CLS 64 bytes, default 64 [ 0.227453] Trying to unpack rootfs image as initramfs... [ 0.572008] Freeing initrd memory: 18760K (ffff880035b4c000 - ffff880036d9e000) [ 0.572098] Simple Boot Flag at 0x44 set to 0x1 [ 0.572278] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x1f [ 0.572282] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x1f [ 0.572289] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x1f [ 0.572295] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x1f [ 0.572346] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.572347] Scanning for low memory corruption every 60 seconds [ 0.572594] Initialise system trusted keyring [ 0.572642] audit: initializing netlink socket (disabled) [ 0.572655] type=2000 audit(1498405862.572:1): initialized [ 0.603268] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.604187] zbud: loaded [ 0.604335] VFS: Disk quotas dquot_6.5.2 [ 0.604370] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.604732] fuse init (API version 7.22) [ 0.604790] msgmni has been set to 3854 [ 0.604838] Key type big_key registered [ 0.605137] Key type asymmetric registered [ 0.605139] Asymmetric key parser 'x509' registered [ 0.605167] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.605196] io scheduler noop registered [ 0.605199] io scheduler deadline registered (default) [ 0.605223] io scheduler cfq registered [ 0.605400] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X [ 0.605534] pcieport 0000:00:1c.2: irq 57 for MSI/MSI-X [ 0.605661] pcieport 0000:00:1c.3: irq 58 for MSI/MSI-X [ 0.605730] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.605731] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.605736] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.605751] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.605753] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.605756] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.605784] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.605786] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.605789] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.605799] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.605810] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.605841] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 0.605842] vesafb: scrolling: redraw [ 0.605844] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.609073] vesafb: framebuffer at 0x90000000, mapped to 0xffffc90010400000, using 4160k, total 4160k [ 0.611985] Console: switching to colour frame buffer device 170x48 [ 0.614766] fb0: VESA VGA frame buffer device [ 0.614794] intel_idle: does not run on family 6 model 61 [ 0.614800] ipmi message handler version 39.2 [ 0.615846] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.616794] ACPI: AC Adapter [ACAD] (off-line) [ 0.616867] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.616871] ACPI: Power Button [PWRB] [ 0.616898] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.618209] ACPI: Lid Switch [LID0] [ 0.618253] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.618257] ACPI: Power Button [PWRF] [ 0.619577] Monitor-Mwait will be used to enter C-1 state [ 0.619582] Monitor-Mwait will be used to enter C-2 state [ 0.619587] ACPI: acpi_idle registered with cpuidle [ 0.620612] ACPI: Invalid passive threshold [ 0.621213] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.621215] ACPI: Thermal Zone [THRM] (33 C) [ 0.621241] GHES: HEST is not enabled! [ 0.621328] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.624127] Linux agpgart interface v0.103 [ 0.625321] brd: module loaded [ 0.625881] loop: module loaded [ 0.626199] libphy: Fixed MDIO Bus: probed [ 0.626277] tun: Universal TUN/TAP device driver, 1.6 [ 0.626278] tun: (C) 1999-2004 Max Krasnyansky [ 0.626308] PPP generic driver version 2.4.2 [ 0.626342] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.626345] ehci-pci: EHCI PCI platform driver [ 0.626354] ehci-platform: EHCI generic platform driver [ 0.626360] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.626361] ohci-pci: OHCI PCI platform driver [ 0.626367] ohci-platform: OHCI generic platform driver [ 0.626373] uhci_hcd: USB Universal Host Controller Interface driver [ 0.626470] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 0.626472] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 7 [ 0.626499] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.626506] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.626586] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.626604] xhci_hcd 0000:00:14.0: irq 59 for MSI/MSI-X [ 0.626663] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.626665] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.626667] usb usb1: Product: xHCI Host Controller [ 0.626668] usb usb1: Manufacturer: Linux 3.13.0-68-generic xhci_hcd [ 0.626670] usb usb1: SerialNumber: 0000:00:14.0 [ 0.626758] hub 1-0:1.0: USB hub found [ 0.626769] hub 1-0:1.0: 11 ports detected [ 0.629469] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.629472] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.629502] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.629503] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.629505] usb usb2: Product: xHCI Host Controller [ 0.629506] usb usb2: Manufacturer: Linux 3.13.0-68-generic xhci_hcd [ 0.629508] usb usb2: SerialNumber: 0000:00:14.0 [ 0.629585] hub 2-0:1.0: USB hub found [ 0.629592] hub 2-0:1.0: 4 ports detected [ 0.637853] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.642479] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.642485] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.642686] mousedev: PS/2 mouse device common for all mice [ 0.643092] rtc_cmos 00:04: RTC can wake from S4 [ 0.643280] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.643309] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.643373] device-mapper: uevent: version 1.0.3 [ 0.643429] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.643435] ledtrig-cpu: registered to indicate activity on CPUs [ 0.643525] TCP: cubic registered [ 0.643600] NET: Registered protocol family 10 [ 0.643767] NET: Registered protocol family 17 [ 0.643776] Key type dns_resolver registered [ 0.643981] Loading compiled-in X.509 certificates [ 0.644880] Loaded X.509 cert 'Magrathea: Glacier signing key: 45b86d4b283fca0440ec04f3a7a2bc675bf46944' [ 0.644892] registered taskstats version 1 [ 0.646884] Key type trusted registered [ 0.650168] Key type encrypted registered [ 0.650174] AppArmor: AppArmor sha1 policy hashing enabled [ 0.650177] IMA: No TPM chip found, activating TPM-bypass! [ 0.650642] regulator-dummy: disabling [ 0.650684] Magic number: 5:808:892 [ 0.650731] bdi default: hash matches [ 0.650772] rtc_cmos 00:04: setting system clock to 2017-06-25 15:51:03 UTC (1498405863) [ 0.651488] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.651490] EDD information not available. [ 0.651526] PM: Hibernation image not present or could not be loaded. [ 0.663498] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.937710] usb 1-5: new high-speed USB device number 2 using xhci_hcd [ 1.039976] usb 1-5: New USB device found, idVendor=04f2, idProduct=b413 [ 1.039979] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.039981] usb 1-5: Product: FJ Camera [ 1.039983] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd. [ 1.133240] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.133246] ACPI: Battery Slot [BAT1] (battery present) [ 1.134066] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) [ 1.134069] Write protecting the kernel read-only data: 12288k [ 1.136155] Freeing unused kernel memory: 784K (ffff88000173c000 - ffff880001800000) [ 1.137871] Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000) [ 1.149411] systemd-udevd[123]: starting version 204 [ 1.170578] rtsx_pci 0000:01:00.0: irq 60 for MSI/MSI-X [ 1.170594] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 60 [ 1.172436] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.172446] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.173017] ahci 0000:00:1f.2: version 3.0 [ 1.173186] ahci 0000:00:1f.2: irq 61 for MSI/MSI-X [ 1.182509] r8169 0000:03:00.0: irq 62 for MSI/MSI-X [ 1.182728] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000360000, 74:2b:62:f0:09:41, XID 0c000800 IRQ 62 [ 1.182732] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.185883] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.185889] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.186642] scsi0 : ahci [ 1.186809] scsi1 : ahci [ 1.186871] ata1: SATA max UDMA/133 abar m2048@0xa141c000 port 0xa141c100 irq 61 [ 1.186875] ata2: SATA max UDMA/133 abar m2048@0xa141c000 port 0xa141c180 irq 61 [ 1.209604] usb 1-6: new full-speed USB device number 3 using xhci_hcd [ 1.226373] usb 1-6: No LPM exit latency info found. Power management will be impacted. [ 1.227180] usb 1-6: New USB device found, idVendor=8087, idProduct=0a2a [ 1.227183] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.505507] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.505524] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.506047] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.506234] ata1.00: ATA-9: WDC WD5000LPVX-16V0TT3, 02.01A02, max UDMA/133 [ 1.506238] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.506834] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.507022] ata1.00: configured for UDMA/133 [ 1.507229] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-1 02.0 PQ: 0 ANSI: 5 [ 1.507379] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.507383] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.507403] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.507406] sd 0:0:0:0: [sda] Write Protect is off [ 1.507409] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.507419] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.509276] ata2.00: ATAPI: TSSTcorp CDDVDW SU-208GB, FU01, max UDMA/100 [ 1.512202] ata2.00: configured for UDMA/100 [ 1.517858] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208GB FU01 PQ: 0 ANSI: 5 [ 1.523438] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.523442] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.523590] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.523662] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.569429] tsc: Refined TSC clocksource calibration: 1995.380 MHz [ 1.581320] sda: sda1 sda2 < sda5 > [ 1.581771] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.587307] psmouse serio1: alps: Unknown ALPS touchpad: E7=73 03 14, EC=73 02 36 [ 2.016413] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.360700] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5 [ 2.569197] Switched to clocksource tsc [ 2.939382] random: nonblocking pool is initialized [ 14.206374] Adding 3993676k swap on /dev/sda5. Priority:-1 extents:1 across:3993676k FS [ 14.349703] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.411468] systemd-udevd[298]: starting version 204 [ 14.555576] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input6 [ 14.555995] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on) [ 14.557697] [drm] Initialized drm 1.1.0 20060810 [ 14.561748] fujitsu_laptop: BTNI: [0x70101] [ 14.563026] fujitsu_laptop: driver 0.6.0 successfully loaded [ 14.586454] lp: driver loaded but no devices found [ 14.596424] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.600088] [drm] Memory usable by graphics device = 4096M [ 14.600094] checking generic (90000000 410000) vs hw (90000000 10000000) [ 14.600097] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 14.600118] Console: switching to colour dummy device 80x25 [ 14.623716] cfg80211: Calling CRDA to update world regulatory domain [ 14.629158] ppdev: user-space parallel port driver [ 14.631067] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 14.631071] Copyright(c) 2003-2013 Intel Corporation [ 14.631906] iwlwifi 0000:02:00.0: irq 63 for MSI/MSI-X [ 14.632451] Bluetooth: Core ver 2.17 [ 14.632470] NET: Registered protocol family 31 [ 14.632472] Bluetooth: HCI device and connection manager initialized [ 14.632480] Bluetooth: HCI socket layer initialized [ 14.632484] Bluetooth: L2CAP socket layer initialized [ 14.632492] Bluetooth: SCO socket layer initialized [ 14.651138] usbcore: registered new interface driver btusb [ 14.664753] i915 0000:00:02.0: irq 64 for MSI/MSI-X [ 14.664769] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 14.664771] [drm] Driver supports precise vblank timestamp query. [ 14.664797] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 14.668491] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 14.732114] fbcon: inteldrmfb (fb0) is primary device [ 14.904290] type=1400 audit(1498405877.754:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=424 comm="apparmor_parser" [ 14.904295] type=1400 audit(1498405877.754:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=424 comm="apparmor_parser" [ 14.904297] type=1400 audit(1498405877.754:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=424 comm="apparmor_parser" [ 14.904704] type=1400 audit(1498405877.758:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=424 comm="apparmor_parser" [ 14.904707] type=1400 audit(1498405877.758:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=424 comm="apparmor_parser" [ 14.904910] type=1400 audit(1498405877.758:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=424 comm="apparmor_parser" [ 14.990162] iwlwifi 0000:02:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm [ 15.004850] iwlwifi 0000:02:00.0: Detected Intel(R) Wireless N 7265, REV=0x210 [ 15.005172] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 15.005600] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 15.056084] Linux video capture interface: v2.00 [ 15.059513] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 15.063487] uvcvideo: Found UVC 1.00 device FJ Camera (04f2:b413) [ 15.074493] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 15.102864] input: FJ Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input7 [ 15.102935] usbcore: registered new interface driver uvcvideo [ 15.102935] USB Video Class driver (1.1.1) [ 15.123285] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 15.784339] Console: switching to colour frame buffer device 170x48 [ 15.787109] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 15.787110] i915 0000:00:02.0: registered panic notifier [ 15.794804] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 15.794911] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 15.796190] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 15.796284] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 15.796286] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.796299] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251) [ 15.796302] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251) [ 15.796303] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.796306] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251) [ 15.796309] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251) [ 15.796312] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_PR_.IO_D 3 (20131115/utaddress-251) [ 15.796313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.796314] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 15.796609] mei_me 0000:00:16.0: irq 65 for MSI/MSI-X [ 15.802326] hda-intel 0000:00:03.0: Using LPIB position fix [ 15.802378] HDA driver get symbol successfully from i915 module [ 15.802755] snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X [ 15.812692] snd_hda_intel 0000:00:03.0: irq 67 for MSI/MSI-X [ 15.821452] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 15.822386] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 15.822509] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 15.823302] hda_codec: ALC283: SKU not ready 0x909701f0 [ 15.823477] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 15.823478] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.823479] hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 15.823480] mono: mono_out=0x0 [ 15.823480] inputs: [ 15.823482] Mic=0x12 [ 15.823483] realtek: No valid SSID, checking pincfg 0x909701f0 for NID 0x1d [ 15.823483] realtek: Enable default setup for auto mode as fallback [ 15.870230] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 15.876481] cfg80211: World regulatory domain updated: [ 15.876485] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.876488] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.876491] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.876493] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.876495] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.876497] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.048870] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 17.883734] init: failsafe main process (716) killed by TERM signal [ 18.327011] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.327014] Bluetooth: BNEP filters: protocol multicast [ 18.327022] Bluetooth: BNEP socket layer initialized [ 18.328707] Bluetooth: RFCOMM TTY layer initialized [ 18.328719] Bluetooth: RFCOMM socket layer initialized [ 18.328726] Bluetooth: RFCOMM ver 1.11 [ 18.654925] type=1400 audit(1498405881.506:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=855 comm="apparmor_parser" [ 18.654932] type=1400 audit(1498405881.506:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=855 comm="apparmor_parser" [ 18.655339] type=1400 audit(1498405881.510:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=855 comm="apparmor_parser" [ 18.724762] init: cups main process (856) killed by HUP signal [ 18.724771] init: cups main process ended, respawning [ 20.273588] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 20.274106] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 20.288238] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.288497] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.492669] r8169 0000:03:00.0 eth0: link down [ 20.492733] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.493195] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.283869] wlan0: authenticate with 40:c7:29:42:25:ea [ 21.288166] wlan0: send auth to 40:c7:29:42:25:ea (try 1/3) [ 21.290574] wlan0: authenticated [ 21.294329] wlan0: associate with 40:c7:29:42:25:ea (try 1/3) [ 21.297977] wlan0: RX AssocResp from 40:c7:29:42:25:ea (capab=0x431 status=0 aid=4) [ 21.298641] wlan0: associated [ 21.298664] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 21.298717] cfg80211: Calling CRDA for country: FR [ 21.300655] cfg80211: Regulatory domain changed to country: FR [ 21.300658] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.300660] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 21.300662] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 21.300663] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 21.300664] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 21.300665] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 21.528977] init: samba-ad-dc main process (890) terminated with status 1 [ 23.219248] type=1400 audit(1498405886.074:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=966 comm="apparmor_parser" [ 23.219256] type=1400 audit(1498405886.074:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=966 comm="apparmor_parser" [ 23.219260] type=1400 audit(1498405886.074:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=966 comm="apparmor_parser" [ 23.219648] type=1400 audit(1498405886.074:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=966 comm="apparmor_parser" [ 23.219652] type=1400 audit(1498405886.074:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=966 comm="apparmor_parser" [ 23.219857] type=1400 audit(1498405886.074:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=966 comm="apparmor_parser" [ 23.220140] type=1400 audit(1498405886.074:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=965 comm="apparmor_parser" [ 23.220149] type=1400 audit(1498405886.074:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=965 comm="apparmor_parser" [ 23.220523] type=1400 audit(1498405886.074:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=965 comm="apparmor_parser" [ 23.222606] type=1400 audit(1498405886.078:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=969 comm="apparmor_parser" [ 23.531763] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory [ 23.622812] init: ordi-brightness main process (1019) terminated with status 2 [ 23.665576] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 24.348025] ip_tables: (C) 2000-2006 Netfilter Core Team [ 26.472008] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 48.717612] audit_printk_skb: 126 callbacks suppressed [ 48.717615] type=1400 audit(1498405911.582:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1705 comm="apparmor_parser" [ 48.717621] type=1400 audit(1498405911.582:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1705 comm="apparmor_parser" [ 48.718005] type=1400 audit(1498405911.582:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1705 comm="apparmor_parser" [ 49.020849] init: plymouth-upstart-bridge main process ended, respawning [ 49.055781] init: plymouth-upstart-bridge main process ended, respawning [ 52.840295] init: anacron main process (1122) killed by TERM signal [ 1294.067854] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 1294.067881] pci 0000:00:00.0: no hotplug settings from platform [ 1294.067886] pci 0000:00:00.0: using default PCI settings [ 1294.067900] i915 0000:00:02.0: no hotplug settings from platform [ 1294.067903] i915 0000:00:02.0: using default PCI settings [ 1294.067916] snd_hda_intel 0000:00:03.0: no hotplug settings from platform [ 1294.067925] xhci_hcd 0000:00:14.0: no hotplug settings from platform [ 1294.067928] xhci_hcd 0000:00:14.0: using default PCI settings [ 1294.067942] mei_me 0000:00:16.0: no hotplug settings from platform [ 1294.067946] mei_me 0000:00:16.0: using default PCI settings [ 1294.067962] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform [ 1294.067965] snd_hda_intel 0000:00:1b.0: using default PCI settings [ 1294.067981] pcieport 0000:00:1c.0: no hotplug settings from platform [ 1294.068091] rtsx_pci 0000:01:00.0: no hotplug settings from platform [ 1294.068099] pcieport 0000:00:1c.2: no hotplug settings from platform [ 1294.068252] iwlwifi 0000:02:00.0: no hotplug settings from platform [ 1294.068260] pcieport 0000:00:1c.3: no hotplug settings from platform [ 1294.068274] r8169 0000:03:00.0: no hotplug settings from platform [ 1294.068285] lpc_ich 0000:00:1f.0: no hotplug settings from platform [ 1294.068288] lpc_ich 0000:00:1f.0: using default PCI settings [ 1294.068304] ahci 0000:00:1f.2: no hotplug settings from platform [ 1294.068308] ahci 0000:00:1f.2: using default PCI settings [ 1294.068321] pci 0000:00:1f.3: no hotplug settings from platform [ 1294.068324] pci 0000:00:1f.3: using default PCI settings [ 1294.068338] pci 0000:00:1f.6: no hotplug settings from platform [ 1294.068341] pci 0000:00:1f.6: using default PCI settings [ 1295.515256] wlan0: deauthenticating from 40:c7:29:42:25:ea by local choice (reason=3) [ 1295.519538] cfg80211: Calling CRDA to update world regulatory domain [ 1297.307065] cfg80211: World regulatory domain updated: [ 1297.307068] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1297.307070] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1297.307072] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1297.307073] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1297.307074] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1297.307075] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1305.883203] init: anacron main process (2836) killed by TERM signal [ 1306.692476] PM: Syncing filesystems ... done. [ 1306.909301] PM: Preparing system for mem sleep [ 1307.150385] Freezing user space processes ... (elapsed 0.016 seconds) done. [ 1307.166530] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1307.167821] PM: Entering mem sleep [ 1307.167916] Suspending console(s) (use no_console_suspend to debug) [ 1307.168105] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1307.168198] sd 0:0:0:0: [sda] Stopping disk [ 1307.745476] PM: suspend of devices complete after 577.661 msecs [ 1307.761424] PM: late suspend of devices complete after 15.948 msecs [ 1307.761606] r8169 0000:03:00.0: System wakeup enabled by ACPI [ 1307.809377] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 1307.809412] PM: noirq suspend of devices complete after 48.003 msecs [ 1307.809710] ACPI: Preparing to enter system sleep state S3 [ 1307.812595] PM: Saving platform NVS memory [ 1307.813882] Disabling non-boot CPUs ... [ 1307.815197] kvm: disabling virtualization on CPU1 [ 1307.917270] smpboot: CPU 1 is now offline [ 1307.918748] kvm: disabling virtualization on CPU2 [ 1308.021224] smpboot: CPU 2 is now offline [ 1308.021651] Broke affinity for irq 59 [ 1308.021654] Broke affinity for irq 63 [ 1308.022658] kvm: disabling virtualization on CPU3 [ 1308.125200] smpboot: CPU 3 is now offline [ 1308.126978] ACPI: Low-level resume complete [ 1308.127035] PM: Restoring platform NVS memory [ 1308.127755] Enabling non-boot CPUs ... [ 1308.127788] x86: Booting SMP configuration: [ 1308.127788] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1308.139963] kvm: enabling virtualization on CPU1 [ 1308.142276] CPU1 is up [ 1308.142290] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 1308.154510] kvm: enabling virtualization on CPU2 [ 1308.156859] CPU2 is up [ 1308.156873] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1308.169043] kvm: enabling virtualization on CPU3 [ 1308.171365] CPU3 is up [ 1308.175688] ACPI: Waking up from system sleep state S3 [ 1310.718481] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 1310.814495] PM: noirq resume of devices complete after 126.265 msecs [ 1310.814631] PM: early resume of devices complete after 0.115 msecs [ 1310.814865] snd_hda_intel 0000:00:03.0: irq 65 for MSI/MSI-X [ 1310.816560] mei_me 0000:00:16.0: irq 66 for MSI/MSI-X [ 1310.816730] snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X [ 1310.817076] r8169 0000:03:00.0: System wakeup disabled by ACPI [ 1311.086628] usb 1-5: reset high-speed USB device number 2 using xhci_hcd [ 1311.138344] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1311.138360] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1311.138944] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1311.139633] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1311.139729] ata1.00: configured for UDMA/133 [ 1311.145199] ata2.00: configured for UDMA/100 [ 1311.158313] sd 0:0:0:0: [sda] Starting disk [ 1311.178727] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007432c1c0 [ 1311.217008] PM: resume of devices complete after 402.518 msecs [ 1311.217173] PM: Finishing wakeup. [ 1311.217174] Restarting tasks ... done. [ 1311.618130] psmouse serio1: alps: Unknown ALPS touchpad: E7=73 03 14, EC=73 02 36 [ 1311.910833] rtsx_pci 0000:01:00.0: no hotplug settings from platform [ 1311.923018] iwlwifi 0000:02:00.0: no hotplug settings from platform [ 1311.923052] r8169 0000:03:00.0: no hotplug settings from platform [ 1312.481340] video LNXVIDEO:00: Restoring backlight state [ 1312.718820] init: anacron main process (3073) killed by TERM signal [ 1312.799013] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 1312.799544] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 1312.812801] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1312.871717] r8169 0000:03:00.0 eth0: link down [ 1312.871763] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1313.712507] wlan0: authenticate with 40:c7:29:42:25:ea [ 1313.716152] wlan0: send auth to 40:c7:29:42:25:ea (try 1/3) [ 1313.718490] wlan0: authenticated [ 1313.721342] wlan0: associate with 40:c7:29:42:25:ea (try 1/3) [ 1313.724769] wlan0: RX AssocResp from 40:c7:29:42:25:ea (capab=0x431 status=0 aid=3) [ 1313.728130] wlan0: associated [ 1313.728153] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1313.728227] cfg80211: Calling CRDA for country: FR [ 1313.730461] cfg80211: Regulatory domain changed to country: FR [ 1313.730464] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1313.730466] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1313.730467] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1313.730468] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1313.730470] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 1313.730471] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 5085.897388] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 5085.897400] pci 0000:00:00.0: no hotplug settings from platform [ 5085.897402] pci 0000:00:00.0: using default PCI settings [ 5085.897408] i915 0000:00:02.0: no hotplug settings from platform [ 5085.897409] i915 0000:00:02.0: using default PCI settings [ 5085.897415] snd_hda_intel 0000:00:03.0: no hotplug settings from platform [ 5085.897418] xhci_hcd 0000:00:14.0: no hotplug settings from platform [ 5085.897420] xhci_hcd 0000:00:14.0: using default PCI settings [ 5085.897427] mei_me 0000:00:16.0: no hotplug settings from platform [ 5085.897428] mei_me 0000:00:16.0: using default PCI settings [ 5085.897436] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform [ 5085.897437] snd_hda_intel 0000:00:1b.0: using default PCI settings [ 5085.897444] pcieport 0000:00:1c.0: no hotplug settings from platform [ 5085.897542] rtsx_pci 0000:01:00.0: no hotplug settings from platform [ 5085.897546] pcieport 0000:00:1c.2: no hotplug settings from platform [ 5085.897690] iwlwifi 0000:02:00.0: no hotplug settings from platform [ 5085.897694] pcieport 0000:00:1c.3: no hotplug settings from platform [ 5085.897703] r8169 0000:03:00.0: no hotplug settings from platform [ 5085.897706] lpc_ich 0000:00:1f.0: no hotplug settings from platform [ 5085.897708] lpc_ich 0000:00:1f.0: using default PCI settings [ 5085.897717] ahci 0000:00:1f.2: no hotplug settings from platform [ 5085.897718] ahci 0000:00:1f.2: using default PCI settings [ 5085.897725] pci 0000:00:1f.3: no hotplug settings from platform [ 5085.897727] pci 0000:00:1f.3: using default PCI settings [ 5085.897736] pci 0000:00:1f.6: no hotplug settings from platform [ 5085.897739] pci 0000:00:1f.6: using default PCI settings [ 5086.552514] wlan0: deauthenticating from 40:c7:29:42:25:ea by local choice (reason=3) [ 5086.556812] cfg80211: Calling CRDA to update world regulatory domain [ 5092.241641] cfg80211: World regulatory domain updated: [ 5092.241646] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5092.241650] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5092.241653] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5092.241655] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5092.241657] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5092.241660] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5100.326993] init: anacron main process (3942) killed by TERM signal [ 5101.362902] PM: Syncing filesystems ... done. [ 5101.681840] PM: Preparing system for mem sleep [ 5101.995849] Freezing user space processes ... (elapsed 0.193 seconds) done. [ 5102.188892] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5102.190183] PM: Entering mem sleep [ 5102.190276] Suspending console(s) (use no_console_suspend to debug) [ 5102.190465] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5102.190584] sd 0:0:0:0: [sda] Stopping disk [ 5102.767892] PM: suspend of devices complete after 577.718 msecs [ 5102.783881] PM: late suspend of devices complete after 15.990 msecs [ 5102.784062] r8169 0000:03:00.0: System wakeup enabled by ACPI [ 5102.831834] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 5102.831869] PM: noirq suspend of devices complete after 48.003 msecs [ 5102.832167] ACPI: Preparing to enter system sleep state S3 [ 5102.836718] PM: Saving platform NVS memory [ 5102.838021] Disabling non-boot CPUs ... [ 5102.839311] kvm: disabling virtualization on CPU1 [ 5102.939725] smpboot: CPU 1 is now offline [ 5102.941164] kvm: disabling virtualization on CPU2 [ 5103.043694] smpboot: CPU 2 is now offline [ 5103.044087] Broke affinity for irq 59 [ 5103.045096] kvm: disabling virtualization on CPU3 [ 5103.147643] smpboot: CPU 3 is now offline [ 5103.149376] ACPI: Low-level resume complete [ 5103.149432] PM: Restoring platform NVS memory [ 5103.150154] Enabling non-boot CPUs ... [ 5103.150187] x86: Booting SMP configuration: [ 5103.150187] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 5103.162359] kvm: enabling virtualization on CPU1 [ 5103.164691] CPU1 is up [ 5103.164704] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 5103.176920] kvm: enabling virtualization on CPU2 [ 5103.179244] CPU2 is up [ 5103.179258] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 5103.191430] kvm: enabling virtualization on CPU3 [ 5103.193755] CPU3 is up [ 5103.198102] ACPI: Waking up from system sleep state S3 [ 5103.253836] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 5103.349849] PM: noirq resume of devices complete after 126.326 msecs [ 5103.349987] PM: early resume of devices complete after 0.115 msecs [ 5103.350240] snd_hda_intel 0000:00:03.0: irq 65 for MSI/MSI-X [ 5103.350333] mei_me 0000:00:16.0: irq 66 for MSI/MSI-X [ 5103.350644] r8169 0000:03:00.0: System wakeup disabled by ACPI [ 5103.350788] snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X [ 5103.621969] usb 1-5: reset high-speed USB device number 2 using xhci_hcd [ 5103.669703] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5103.680486] ata2.00: configured for UDMA/100 [ 5103.714013] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007432c1c0 [ 5104.175029] psmouse serio1: alps: Unknown ALPS touchpad: E7=73 03 14, EC=73 02 36 [ 5104.845272] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5104.959217] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 5104.959955] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 5104.960058] ata1.00: configured for UDMA/133 [ 5104.973218] sd 0:0:0:0: [sda] Starting disk [ 5105.005071] PM: resume of devices complete after 1655.677 msecs [ 5105.005248] PM: Finishing wakeup. [ 5105.005477] rtsx_pci 0000:01:00.0: no hotplug settings from platform [ 5105.005944] iwlwifi 0000:02:00.0: no hotplug settings from platform [ 5105.005979] r8169 0000:03:00.0: no hotplug settings from platform [ 5105.005249] Restarting tasks ... done. [ 5105.519520] video LNXVIDEO:00: Restoring backlight state [ 5106.437034] init: anacron main process (4177) killed by TERM signal [ 5106.548433] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 5106.549117] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 5106.562245] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5106.618617] r8169 0000:03:00.0 eth0: link down [ 5106.618663] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5107.594122] wlan0: authenticate with 40:c7:29:42:25:ea [ 5107.597709] wlan0: send auth to 40:c7:29:42:25:ea (try 1/3) [ 5107.600045] wlan0: authenticated [ 5107.604208] wlan0: associate with 40:c7:29:42:25:ea (try 1/3) [ 5107.607588] wlan0: RX AssocResp from 40:c7:29:42:25:ea (capab=0x431 status=0 aid=4) [ 5107.608572] wlan0: associated [ 5107.608600] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5107.608681] cfg80211: Calling CRDA for country: FR [ 5107.611088] cfg80211: Regulatory domain changed to country: FR [ 5107.611092] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5107.611094] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5107.611095] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5107.611096] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5107.611097] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 5107.611099] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 5248.395213] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 5248.395242] pci 0000:00:00.0: no hotplug settings from platform [ 5248.395247] pci 0000:00:00.0: using default PCI settings [ 5248.395265] i915 0000:00:02.0: no hotplug settings from platform [ 5248.395270] i915 0000:00:02.0: using default PCI settings [ 5248.395285] snd_hda_intel 0000:00:03.0: no hotplug settings from platform [ 5248.395295] xhci_hcd 0000:00:14.0: no hotplug settings from platform [ 5248.395300] xhci_hcd 0000:00:14.0: using default PCI settings [ 5248.395316] mei_me 0000:00:16.0: no hotplug settings from platform [ 5248.395321] mei_me 0000:00:16.0: using default PCI settings [ 5248.395338] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform [ 5248.395343] snd_hda_intel 0000:00:1b.0: using default PCI settings [ 5248.395358] pcieport 0000:00:1c.0: no hotplug settings from platform [ 5248.395470] rtsx_pci 0000:01:00.0: no hotplug settings from platform [ 5248.395479] pcieport 0000:00:1c.2: no hotplug settings from platform [ 5248.395634] iwlwifi 0000:02:00.0: no hotplug settings from platform [ 5248.395643] pcieport 0000:00:1c.3: no hotplug settings from platform [ 5248.395659] r8169 0000:03:00.0: no hotplug settings from platform [ 5248.395668] lpc_ich 0000:00:1f.0: no hotplug settings from platform [ 5248.395673] lpc_ich 0000:00:1f.0: using default PCI settings [ 5248.395692] ahci 0000:00:1f.2: no hotplug settings from platform [ 5248.395697] ahci 0000:00:1f.2: using default PCI settings [ 5248.395713] pci 0000:00:1f.3: no hotplug settings from platform [ 5248.395718] pci 0000:00:1f.3: using default PCI settings [ 5248.395734] pci 0000:00:1f.6: no hotplug settings from platform [ 5248.395739] pci 0000:00:1f.6: using default PCI settings [ 5248.596766] wlan0: deauthenticating from 40:c7:29:42:25:ea by local choice (reason=3) [ 5248.601739] cfg80211: Calling CRDA to update world regulatory domain [ 5248.658762] cfg80211: World regulatory domain updated: [ 5248.658770] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5248.658775] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5248.658780] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5248.658783] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5248.658787] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5248.658790] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5249.322979] init: anacron main process (4595) killed by TERM signal [ 5249.667413] PM: Syncing filesystems ... done. [ 5249.839819] PM: Preparing system for mem sleep [ 5249.840123] Freezing user space processes ... (elapsed 0.040 seconds) done. [ 5249.880715] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5249.881946] PM: Entering mem sleep [ 5249.882038] Suspending console(s) (use no_console_suspend to debug) [ 5249.882208] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5249.892396] sd 0:0:0:0: [sda] Stopping disk [ 5250.468664] PM: suspend of devices complete after 586.728 msecs [ 5250.484633] PM: late suspend of devices complete after 15.971 msecs [ 5250.484778] r8169 0000:03:00.0: System wakeup enabled by ACPI [ 5250.532621] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 5250.532654] PM: noirq suspend of devices complete after 48.037 msecs [ 5250.532952] ACPI: Preparing to enter system sleep state S3 [ 5250.536601] PM: Saving platform NVS memory [ 5250.537925] Disabling non-boot CPUs ... [ 5250.539219] kvm: disabling virtualization on CPU1 [ 5250.640506] smpboot: CPU 1 is now offline [ 5250.641966] kvm: disabling virtualization on CPU2 [ 5250.744462] smpboot: CPU 2 is now offline [ 5250.744859] Broke affinity for irq 61 [ 5250.745866] kvm: disabling virtualization on CPU3 [ 5250.848429] smpboot: CPU 3 is now offline [ 5250.850181] ACPI: Low-level resume complete [ 5250.850237] PM: Restoring platform NVS memory [ 5250.850961] Enabling non-boot CPUs ... [ 5250.850996] x86: Booting SMP configuration: [ 5250.850997] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 5250.863169] kvm: enabling virtualization on CPU1 [ 5250.865479] CPU1 is up [ 5250.865493] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 5250.877683] kvm: enabling virtualization on CPU2 [ 5250.880021] CPU2 is up [ 5250.880036] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 5250.892207] kvm: enabling virtualization on CPU3 [ 5250.894516] CPU3 is up [ 5250.898840] ACPI: Waking up from system sleep state S3 [ 5250.958621] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 5251.054637] PM: noirq resume of devices complete after 126.456 msecs [ 5251.054774] PM: early resume of devices complete after 0.116 msecs [ 5251.054887] mei_me 0000:00:16.0: irq 65 for MSI/MSI-X [ 5251.054999] snd_hda_intel 0000:00:03.0: irq 66 for MSI/MSI-X [ 5251.055173] snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X [ 5251.055488] r8169 0000:03:00.0: System wakeup disabled by ACPI [ 5251.326754] usb 1-5: reset high-speed USB device number 2 using xhci_hcd [ 5251.382485] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5251.392957] ata2.00: configured for UDMA/100 [ 5251.418959] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007432c1c0 [ 5251.871188] psmouse serio1: alps: Unknown ALPS touchpad: E7=73 03 14, EC=73 02 36 [ 5252.502081] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5252.608594] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 5252.609337] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 5252.609440] ata1.00: configured for UDMA/133 [ 5252.622002] sd 0:0:0:0: [sda] Starting disk [ 5252.654453] PM: resume of devices complete after 1600.253 msecs [ 5252.654617] PM: Finishing wakeup. [ 5252.658285] rtsx_pci 0000:01:00.0: no hotplug settings from platform [ 5252.658671] iwlwifi 0000:02:00.0: no hotplug settings from platform [ 5252.658711] r8169 0000:03:00.0: no hotplug settings from platform [ 5252.654619] Restarting tasks ... done. [ 5253.183260] video LNXVIDEO:00: Restoring backlight state [ 5253.340611] init: anacron main process (4783) killed by TERM signal [ 5253.429263] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 5253.429805] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 5253.442914] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5253.499854] r8169 0000:03:00.0 eth0: link down [ 5253.499897] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5254.316664] wlan0: authenticate with 40:c7:29:42:25:ea [ 5254.320304] wlan0: send auth to 40:c7:29:42:25:ea (try 1/3) [ 5254.322772] wlan0: authenticated [ 5254.326212] wlan0: associate with 40:c7:29:42:25:ea (try 1/3) [ 5254.331008] wlan0: RX AssocResp from 40:c7:29:42:25:ea (capab=0x431 status=0 aid=3) [ 5254.331835] wlan0: associated [ 5254.331899] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5254.332152] cfg80211: Calling CRDA for country: FR [ 5254.334501] cfg80211: Regulatory domain changed to country: FR [ 5254.334505] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5254.334507] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5254.334508] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5254.334510] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5254.334511] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 5254.334513] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 6709.766633] perf samples too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000