[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-27-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #40~precise3-Ubuntu SMP Fri Jul 19 14:40:17 UTC 2013 (Ubuntu 3.8.0-27.40~precise3-generic 3.8.13.4) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dde4ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dde50000-0x00000000ddfd8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ddfd9000-0x00000000ddfdcfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ddfdd000-0x00000000de5e1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de5e2000-0x00000000de835fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de836000-0x00000000de842fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000de843000-0x00000000de861fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de862000-0x00000000de866fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000de867000-0x00000000de8a9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de8aa000-0x00000000decb9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000decba000-0x00000000deff3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: System manufacturer System Product Name/P8Z77-V LX, BIOS 0610 05/08/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FF0000000 write-back [ 0.000000] 2 base 210000000 mask FF8000000 write-back [ 0.000000] 3 base 218000000 mask FFC000000 write-back [ 0.000000] 4 base 21C000000 mask FFE000000 write-back [ 0.000000] 5 base 21E000000 mask FFF000000 write-back [ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 8GB, type WB [ 0.000000] reg 1, base: 8GB, range: 256MB, type WB [ 0.000000] reg 2, base: 8448MB, range: 128MB, type WB [ 0.000000] reg 3, base: 8576MB, range: 64MB, type WB [ 0.000000] reg 4, base: 8640MB, range: 32MB, type WB [ 0.000000] reg 5, base: 8672MB, range: 16MB, type WB [ 0.000000] reg 6, base: 3584MB, range: 512MB, type UC [ 0.000000] total RAM covered: 8176M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 512MB, type WB [ 0.000000] reg 5, base: 8688MB, range: 16MB, type UC [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000fcd10-0x000fcd1f] mapped at [c00fcd10] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff] [ 0.000000] [mem 0x00000000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x379fffff] page 2M [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] RAMDISK: [mem 0x35358000-0x369a3fff] [ 0.000000] ACPI: RSDP 000f0450 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT de836070 00064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP de840908 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT de836168 0A79A (v02 ALASKA A M I 00000015 INTL 20051117) [ 0.000000] ACPI: FACS de860f80 00040 [ 0.000000] ACPI: APIC de840a00 00072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG de840a78 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET de840ab8 00038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT de840af0 0036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT de840e60 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT de841810 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: DMAR de8422a8 00080 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 7796MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x1effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xdde4ffff] [ 0.000000] node 0: [mem 0xddfd9000-0xddfdcfff] [ 0.000000] node 0: [mem 0xde8aa000-0xdecb9fff] [ 0.000000] node 0: [mem 0xdeff4000-0xdeffffff] [ 0.000000] node 0: [mem 0x00000000-0x1effffff] [ 0.000000] On node 0 totalpages: 2085373 [ 0.000000] free_area_init_node: node 0, pgdat c191ff80, node_mem_map f0f78200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 15593 pages used for memmap [ 0.000000] HighMem zone: 1841545 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bb2000 s35008 r0 d22336 u57344 [ 0.000000] pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2067996 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic root=/dev/mapper/lvm-root ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] allocated 17792896 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:0021f000) [ 0.000000] Memory: 8219512k/8896512k available (6359k kernel code, 121980k reserved, 3033k data, 796k init, 7428552k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc192d000 - 0xc19f4000 ( 796 kB) [ 0.000000] .data : 0xc1635c2d - 0xc192c280 (3033 kB) [ 0.000000] .text : 0xc1000000 - 0xc1635c2d (6359 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f0808000 soft=f080a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3309.931 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6619.86 BogoMIPS (lpj=13239724) [ 0.000003] pid_max: default: 32768 minimum: 301 [ 0.000018] Security Framework initialized [ 0.000024] AppArmor: AppArmor initialized [ 0.000025] Yama: becoming mindful. [ 0.000052] Mount-cache hash table entries: 512 [ 0.000166] Initializing cgroup subsys cpuacct [ 0.000167] Initializing cgroup subsys memory [ 0.000171] Initializing cgroup subsys devices [ 0.000172] Initializing cgroup subsys freezer [ 0.000173] Initializing cgroup subsys blkio [ 0.000174] Initializing cgroup subsys perf_event [ 0.000176] Initializing cgroup subsys hugetlb [ 0.000193] CPU: Physical Processor ID: 0 [ 0.000194] CPU: Processor Core ID: 0 [ 0.000197] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000197] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000734] mce: CPU supports 9 MCE banks [ 0.000743] CPU0: Thermal monitoring enabled (TM1) [ 0.000750] process: using mwait in idle threads [ 0.000754] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.000754] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.000754] tlb_flushall_shift: 1 [ 0.000999] Freeing SMP alternatives: 24k freed [ 0.002443] ACPI: Core revision 20121018 [ 0.008291] ftrace: allocating 28844 entries in 57 pages [ 0.017545] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.017931] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.057566] smpboot: CPU0: Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz (fam: 06, model: 3a, stepping: 09) [ 0.057571] TSC deadline timer enabled [ 0.057573] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver. [ 0.057578] ... version: 3 [ 0.057579] ... bit width: 48 [ 0.057580] ... generic registers: 8 [ 0.057581] ... value mask: 0000ffffffffffff [ 0.057581] ... max period: 000000007fffffff [ 0.057582] ... fixed-purpose events: 3 [ 0.057583] ... event mask: 00000007000000ff [ 0.058238] CPU 1 irqstacks, hard=f090c000 soft=f090e000 [ 0.068516] Initializing CPU#1 [ 0.071893] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.058240] smpboot: Booting Node 0, Processors #1 [ 0.071949] CPU 2 irqstacks, hard=f0988000 soft=f098a000 [ 0.082162] Initializing CPU#2 [ 0.071950] #2 [ 0.085625] CPU 3 irqstacks, hard=f09ce000 soft=f09d8000 [ 0.085627] #3 OK [ 0.095832] Initializing CPU#3 [ 0.099347] Brought up 4 CPUs [ 0.099349] smpboot: Total of 4 processors activated (26479.44 BogoMIPS) [ 0.102052] devtmpfs: initialized [ 0.102158] EVM: security.selinux [ 0.102159] EVM: security.SMACK64 [ 0.102160] EVM: security.capability [ 0.102204] PM: Registering ACPI NVS region [mem 0xde5e2000-0xde835fff] (2441216 bytes) [ 0.102224] PM: Registering ACPI NVS region [mem 0xde843000-0xde861fff] (126976 bytes) [ 0.102226] PM: Registering ACPI NVS region [mem 0xde867000-0xde8a9fff] (274432 bytes) [ 0.102720] regulator-dummy: no parameters [ 0.102751] NET: Registered protocol family 16 [ 0.102821] EISA bus registered [ 0.102871] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.102872] ACPI: bus type pci registered [ 0.102905] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.102908] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.102908] PCI: Using MMCONFIG for extended config space [ 0.102909] PCI: Using configuration type 1 for base access [ 0.103462] bio: create slab at 0 [ 0.103513] ACPI: Added _OSI(Module Device) [ 0.103514] ACPI: Added _OSI(Processor Device) [ 0.103515] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.103516] ACPI: Added _OSI(Processor Aggregator Device) [ 0.104673] ACPI: EC: Look up EC in DSDT [ 0.105958] ACPI: Executed 1 blocks of module-level executable AML code [ 0.107908] ACPI: SSDT de58f018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.108205] ACPI: Dynamic OEM Table Load: [ 0.108207] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.108376] ACPI: SSDT de590a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.108692] ACPI: Dynamic OEM Table Load: [ 0.108693] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.108779] ACPI: SSDT de591c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.109075] ACPI: Dynamic OEM Table Load: [ 0.109077] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.109472] ACPI: Interpreter enabled [ 0.109481] ACPI: (supports S0 S1 S3 S4 S5) [ 0.109495] ACPI: Using IOAPIC for interrupt routing [ 0.112646] ACPI: Power Resource [FN00] (off) [ 0.112690] ACPI: Power Resource [FN01] (off) [ 0.112733] ACPI: Power Resource [FN02] (off) [ 0.112775] ACPI: Power Resource [FN03] (off) [ 0.112817] ACPI: Power Resource [FN04] (off) [ 0.113114] ACPI: No dock devices found. [ 0.113118] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.113270] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.113271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.113712] PCI host bridge to bus 0000:00 [ 0.113714] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.113716] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.113717] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.113718] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.113719] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.113721] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.113722] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.113723] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.113724] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.113726] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.113727] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff] [ 0.113733] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.113762] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.113787] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.113824] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.113845] pci 0000:00:14.0: reg 10: [mem 0xf6100000-0xf610ffff 64bit] [ 0.113912] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.113933] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.113954] pci 0000:00:16.0: reg 10: [mem 0xf611a000-0xf611a00f 64bit] [ 0.114025] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.114056] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.114075] pci 0000:00:1a.0: reg 10: [mem 0xf6118000-0xf61183ff] [ 0.114161] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.114184] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.114198] pci 0000:00:1b.0: reg 10: [mem 0xf6110000-0xf6113fff 64bit] [ 0.114262] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.114282] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.114356] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.114381] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 0.114455] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.114479] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401 [ 0.114553] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.114581] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.114600] pci 0000:00:1d.0: reg 10: [mem 0xf6117000-0xf61173ff] [ 0.114686] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.114709] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100 [ 0.114826] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.114843] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077] [ 0.114850] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063] [ 0.114857] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057] [ 0.114863] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043] [ 0.114870] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f] [ 0.114877] pci 0000:00:1f.2: reg 24: [mem 0xf6116000-0xf61167ff] [ 0.114919] pci 0000:00:1f.2: PME# supported from D3hot [ 0.114935] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.114948] pci 0000:00:1f.3: reg 10: [mem 0xf6115000-0xf61150ff 64bit] [ 0.114968] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 0.115014] pci 0000:01:00.0: [10de:1244] type 00 class 0x030000 [ 0.115022] pci 0000:01:00.0: reg 10: [mem 0xf4000000-0xf5ffffff] [ 0.115029] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref] [ 0.115037] pci 0000:01:00.0: reg 1c: [mem 0xe8000000-0xebffffff 64bit pref] [ 0.115043] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f] [ 0.115048] pci 0000:01:00.0: reg 30: [mem 0xf6000000-0xf607ffff pref] [ 0.115089] pci 0000:01:00.1: [10de:0bee] type 00 class 0x040300 [ 0.115096] pci 0000:01:00.1: reg 10: [mem 0xf6080000-0xf6083fff] [ 0.119344] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.119349] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.119352] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf60fffff] [ 0.119358] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref] [ 0.119411] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.119480] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.119500] pci 0000:03:00.0: reg 10: [io 0xd000-0xd0ff] [ 0.119533] pci 0000:03:00.0: reg 18: [mem 0xec104000-0xec104fff 64bit pref] [ 0.119553] pci 0000:03:00.0: reg 20: [mem 0xec100000-0xec103fff 64bit pref] [ 0.119643] pci 0000:03:00.0: supports D1 D2 [ 0.119644] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.127341] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.127346] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.127356] pci 0000:00:1c.4: bridge window [mem 0xec100000-0xec1fffff 64bit pref] [ 0.127423] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401 [ 0.127537] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode) [ 0.127546] pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.127548] pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.127549] pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.127550] pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.127552] pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.127553] pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.127554] pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.127555] pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.127556] pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.127558] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) [ 0.127669] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode) [ 0.127690] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.127691] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.127693] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.127694] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.127695] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.127696] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.127697] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.127699] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.127700] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.127701] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.127702] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.127704] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.127705] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.127706] pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) [ 0.127732] pci_bus 0000:00: on NUMA node 0 [ 0.127741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.127769] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.127791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.127814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06.P9PE._PRT] [ 0.127851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.127938] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.128059] pci0000:00: ACPI _OSC control (0x18) granted [ 0.128495] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.128524] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.128553] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.128580] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.128607] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.128634] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.128661] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.128688] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.128748] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.128749] vgaarb: loaded [ 0.128750] vgaarb: bridge control possible 0000:01:00.0 [ 0.128857] SCSI subsystem initialized [ 0.128858] ACPI: bus type scsi registered [ 0.128876] libata version 3.00 loaded. [ 0.128886] ACPI: bus type usb registered [ 0.128895] usbcore: registered new interface driver usbfs [ 0.128899] usbcore: registered new interface driver hub [ 0.128911] usbcore: registered new device driver usb [ 0.128957] PCI: Using ACPI for IRQ routing [ 0.130402] PCI: pci_cache_line_size set to 64 bytes [ 0.130446] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.130447] e820: reserve RAM buffer [mem 0xdde50000-0xdfffffff] [ 0.130449] e820: reserve RAM buffer [mem 0xddfdd000-0xdfffffff] [ 0.130451] e820: reserve RAM buffer [mem 0xdecba000-0xdfffffff] [ 0.130452] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.130453] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] [ 0.130501] NetLabel: Initializing [ 0.130502] NetLabel: domain hash size = 128 [ 0.130503] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.130510] NetLabel: unlabeled traffic allowed by default [ 0.130562] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.130566] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.132899] Switching to clocksource hpet [ 0.136871] AppArmor: AppArmor Filesystem Enabled [ 0.136879] pnp: PnP ACPI init [ 0.136884] ACPI: bus type pnp registered [ 0.136928] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.136930] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.136937] pnp 00:01: [dma 4] [ 0.136946] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.136958] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.137009] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.137034] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.137035] system 00:04: [io 0x0200-0x020f] has been reserved [ 0.137036] system 00:04: [io 0xffff] has been reserved [ 0.137038] system 00:04: [io 0xffff] has been reserved [ 0.137039] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.137040] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.137042] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.137043] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.137045] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.137061] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.137089] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.137091] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.137138] system 00:07: [io 0x0290-0x029f] has been reserved [ 0.137140] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.137168] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.137169] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.137184] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.137330] pnp 00:0a: [dma 0 disabled] [ 0.137359] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.137502] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.137504] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.137505] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.137506] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.137508] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.137509] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.137511] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.137512] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.137514] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 0.137515] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.137517] system 00:0b: [mem 0xec200000-0xec200fff] has been reserved [ 0.137518] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.137596] pnp: PnP ACPI: found 12 devices [ 0.137596] ACPI: ACPI bus type pnp unregistered [ 0.137598] PnPBIOS: Disabled by ACPI PNP [ 0.173135] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.173137] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.173139] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf60fffff] [ 0.173142] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref] [ 0.173144] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.173154] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.173157] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.173163] pci 0000:00:1c.4: bridge window [mem 0xec100000-0xec1fffff 64bit pref] [ 0.173168] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.173187] pci 0000:00:1c.5: PCI bridge to [bus 04-05] [ 0.173221] pci 0000:04:00.0: setting latency timer to 64 [ 0.173224] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.173226] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.173227] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.173228] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.173230] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.173231] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.173232] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.173234] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.173235] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.173236] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff] [ 0.173238] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.173239] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf60fffff] [ 0.173240] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xebffffff 64bit pref] [ 0.173242] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.173243] pci_bus 0000:03: resource 2 [mem 0xec100000-0xec1fffff 64bit pref] [ 0.173244] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.173246] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.173247] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.173248] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.173249] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.173251] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.173252] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff] [ 0.173253] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.173255] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.173256] pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff] [ 0.173257] pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7] [ 0.173258] pci_bus 0000:05: resource 9 [io 0x0d00-0xffff] [ 0.173260] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff] [ 0.173261] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff] [ 0.173262] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff] [ 0.173264] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff] [ 0.173265] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff] [ 0.173266] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff] [ 0.173267] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff] [ 0.173269] pci_bus 0000:05: resource 17 [mem 0xe0000000-0xfeafffff] [ 0.173286] NET: Registered protocol family 2 [ 0.173360] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.173370] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.173378] TCP: Hash tables configured (established 8192 bind 8192) [ 0.173386] TCP: reno registered [ 0.173388] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.173391] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.173415] NET: Registered protocol family 1 [ 0.212846] pci 0000:01:00.0: Boot video device [ 0.212869] PCI: CLS 64 bytes, default 64 [ 0.212893] Trying to unpack rootfs image as initramfs... [ 0.503708] Freeing initrd memory: 22832k freed [ 0.505657] dmar: Host address width 36 [ 0.505659] dmar: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.505671] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.505672] dmar: RMRR base: 0x000000de559000 end: 0x000000de575fff [ 0.505954] Initialise module verification [ 0.505977] audit: initializing netlink socket (disabled) [ 0.505985] type=2000 audit(1383242205.504:1): initialized [ 0.523146] bounce pool size: 64 pages [ 0.523152] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.524166] VFS: Disk quotas dquot_6.5.2 [ 0.524191] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.524480] fuse init (API version 7.20) [ 0.524524] msgmni has been set to 1589 [ 0.524790] Key type asymmetric registered [ 0.524792] Asymmetric key parser 'x509' registered [ 0.524819] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.524834] io scheduler noop registered [ 0.524835] io scheduler deadline registered (default) [ 0.524839] io scheduler cfq registered [ 0.524910] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.525017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.525025] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.525064] intel_idle: MWAIT substates: 0x1120 [ 0.525065] intel_idle: v0.4 model 0x3A [ 0.525065] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.525116] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.525120] ACPI: Power Button [PWRB] [ 0.525139] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.525141] ACPI: Power Button [PWRF] [ 0.525185] ACPI: Fan [FAN0] (off) [ 0.525202] ACPI: Fan [FAN1] (off) [ 0.525216] ACPI: Fan [FAN2] (off) [ 0.525230] ACPI: Fan [FAN3] (off) [ 0.525245] ACPI: Fan [FAN4] (off) [ 0.525279] ACPI: Requesting acpi_cpufreq [ 0.528682] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.528683] ACPI: Thermal Zone [TZ00] (28 C) [ 0.528812] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.528813] ACPI: Thermal Zone [TZ01] (30 C) [ 0.528835] GHES: HEST is not enabled! [ 0.528847] isapnp: Scanning for PnP cards... [ 0.528877] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.549304] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.550090] Linux agpgart interface v0.103 [ 0.550793] brd: module loaded [ 0.551152] loop: module loaded [ 0.551336] libphy: Fixed MDIO Bus: probed [ 0.551369] tun: Universal TUN/TAP device driver, 1.6 [ 0.551370] tun: (C) 1999-2004 Max Krasnyansky [ 0.551391] PPP generic driver version 2.4.2 [ 0.551412] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.551413] ehci-pci: EHCI PCI platform driver [ 0.551431] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.551433] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.551437] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.551448] ehci-pci 0000:00:1a.0: debug port 2 [ 0.555338] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.555349] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf6118000 [ 0.564376] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.564388] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.564389] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.564391] usb usb1: Product: EHCI Host Controller [ 0.564392] usb usb1: Manufacturer: Linux 3.8.0-27-generic ehci_hcd [ 0.564393] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.564452] hub 1-0:1.0: USB hub found [ 0.564455] hub 1-0:1.0: 2 ports detected [ 0.564527] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.564529] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.564534] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.564544] ehci-pci 0000:00:1d.0: debug port 2 [ 0.568445] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.568447] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6117000 [ 0.580356] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.580363] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.580365] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.580366] usb usb2: Product: EHCI Host Controller [ 0.580367] usb usb2: Manufacturer: Linux 3.8.0-27-generic ehci_hcd [ 0.580368] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.580426] hub 2-0:1.0: USB hub found [ 0.580428] hub 2-0:1.0: 2 ports detected [ 0.580485] ehci-platform: EHCI generic platform driver [ 0.580489] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.580497] uhci_hcd: USB Universal Host Controller Interface driver [ 0.580520] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 0.580522] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.580525] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.580598] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.580634] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X [ 0.580670] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.580671] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.580672] usb usb3: Product: xHCI Host Controller [ 0.580673] usb usb3: Manufacturer: Linux 3.8.0-27-generic xhci_hcd [ 0.580674] usb usb3: SerialNumber: 0000:00:14.0 [ 0.580714] xHCI xhci_add_endpoint called for root hub [ 0.580715] xHCI xhci_check_bandwidth called for root hub [ 0.580726] hub 3-0:1.0: USB hub found [ 0.580731] hub 3-0:1.0: 4 ports detected [ 0.580909] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.580911] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.580924] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.580926] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.580927] usb usb4: Product: xHCI Host Controller [ 0.580928] usb usb4: Manufacturer: Linux 3.8.0-27-generic xhci_hcd [ 0.580929] usb usb4: SerialNumber: 0000:00:14.0 [ 0.580965] xHCI xhci_add_endpoint called for root hub [ 0.580966] xHCI xhci_check_bandwidth called for root hub [ 0.580977] hub 4-0:1.0: USB hub found [ 0.580982] hub 4-0:1.0: 4 ports detected [ 0.875980] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.883094] isapnp: No Plug & Play device found [ 0.884036] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.886546] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.886549] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.886609] mousedev: PS/2 mouse device common for all mice [ 0.886686] rtc_cmos 00:05: RTC can wake from S4 [ 0.886785] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.886809] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.886855] device-mapper: uevent: version 1.0.3 [ 0.886887] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 0.886897] EISA: Probing bus 0 at eisa.0 [ 0.886898] EISA: Cannot allocate resource for mainboard [ 0.886899] Cannot allocate resource for EISA slot 1 [ 0.886900] Cannot allocate resource for EISA slot 2 [ 0.886901] Cannot allocate resource for EISA slot 3 [ 0.886901] Cannot allocate resource for EISA slot 4 [ 0.886902] Cannot allocate resource for EISA slot 5 [ 0.886903] Cannot allocate resource for EISA slot 6 [ 0.886904] Cannot allocate resource for EISA slot 7 [ 0.886905] Cannot allocate resource for EISA slot 8 [ 0.886905] EISA: Detected 0 cards. [ 0.886910] cpufreq-nforce2: No nForce2 chipset. [ 0.886946] cpuidle: using governor ladder [ 0.886996] cpuidle: using governor menu [ 0.886998] ledtrig-cpu: registered to indicate activity on CPUs [ 0.886999] EFI Variables Facility v0.08 2004-May-17 [ 0.887099] ashmem: initialized [ 0.887175] TCP: cubic registered [ 0.887226] NET: Registered protocol family 10 [ 0.887330] NET: Registered protocol family 17 [ 0.887336] Key type dns_resolver registered [ 0.887435] Using IPI No-Shortcut mode [ 0.887491] Loading module verification certificates [ 0.889961] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: db61c353a8c18da6f19e36e4b0b064c23b381d2d' [ 0.889966] registered taskstats version 1 [ 0.891797] Key type trusted registered [ 0.893434] Key type encrypted registered [ 0.895305] rtc_cmos 00:05: setting system clock to 2013-10-31 17:56:45 UTC (1383242205) [ 0.895803] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.895804] EDD information not available. [ 0.895894] Freeing unused kernel memory: 796k freed [ 0.896006] Write protecting the kernel text: 6360k [ 0.896039] Write protecting the kernel read-only data: 2496k [ 0.896040] NX-protecting the kernel data: 3880k [ 0.906329] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 0.906339] Disabling lock debugging due to kernel taint [ 0.906485] zram: num_devices not specified. Using default: 1 [ 0.906486] zram: Creating 1 devices ... [ 0.908556] udevd[114]: starting version 175 [ 0.927386] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.927597] r8169 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.927730] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xf8434000, 10:bf:48:bb:ee:3d, XID 0c900880 IRQ 42 [ 0.927732] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.930134] ahci 0000:00:1f.2: version 3.0 [ 0.930172] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 0.943914] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xe impl SATA mode [ 0.943918] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.943922] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.947841] zram: There is little point creating a zram of greater than twice the size of memory since we expect a 2:1 compression ratio. Note that zram uses about 0.1% of the size of the disk when not in use so a huge zram is wasteful. [ 0.947841] Memory Size: 4048860 kB [ 0.947841] Size you selected: 4220502016 kB [ 0.947841] Continuing anyway ... [ 0.949651] Adding 4121580k swap on /dev/zram0. Priority:100 extents:1 across:4121580k SS [ 0.960192] scsi0 : ahci [ 0.960287] scsi1 : ahci [ 0.960344] scsi2 : ahci [ 0.960390] scsi3 : ahci [ 0.960432] scsi4 : ahci [ 0.960473] scsi5 : ahci [ 0.960517] ata1: DUMMY [ 0.960520] ata2: SATA max UDMA/133 abar m2048@0xf6116000 port 0xf6116180 irq 43 [ 0.960521] ata3: SATA max UDMA/133 abar m2048@0xf6116000 port 0xf6116200 irq 43 [ 0.960523] ata4: SATA max UDMA/133 abar m2048@0xf6116000 port 0xf6116280 irq 43 [ 0.960524] ata5: DUMMY [ 0.960524] ata6: DUMMY [ 1.008227] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.008232] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.008509] hub 1-1:1.0: USB hub found [ 1.008580] hub 1-1:1.0: 6 ports detected [ 1.119692] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.251916] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.251921] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.252177] hub 2-1:1.0: USB hub found [ 1.252267] hub 2-1:1.0: 8 ports detected [ 1.279503] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.279534] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.280406] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359) [ 1.280410] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node f0832858), AE_NOT_FOUND (20121018/psparse-537) [ 1.280698] ata3.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 1.280703] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.281748] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359) [ 1.281752] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node f0832858), AE_NOT_FOUND (20121018/psparse-537) [ 1.282022] ata3.00: configured for UDMA/133 [ 1.285582] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359) [ 1.285585] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node f0832810), AE_NOT_FOUND (20121018/psparse-537) [ 1.285753] ata2.00: ATA-8: ST2000DL004 HD204UI, 1AQ10001, max UDMA/133 [ 1.285758] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.291875] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359) [ 1.291878] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node f0832810), AE_NOT_FOUND (20121018/psparse-537) [ 1.292048] ata2.00: configured for UDMA/133 [ 1.292232] scsi 1:0:0:0: Direct-Access ATA ST2000DL004 HD20 1AQ1 PQ: 0 ANSI: 5 [ 1.292336] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.292342] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.292442] scsi 2:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 MX4O PQ: 0 ANSI: 5 [ 1.292462] sd 1:0:0:0: [sda] Write Protect is off [ 1.292465] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.292532] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.292534] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.292536] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 1.292557] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.292683] sd 2:0:0:0: [sdb] Write Protect is off [ 1.292685] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.292726] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.303460] sdb: sdb1 sdb2 sdb3 sdb4 [ 1.304003] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.313623] sda: unknown partition table [ 1.313986] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.419317] usb 3-4: new high-speed USB device number 2 using xhci_hcd [ 1.436627] usb 3-4: New USB device found, idVendor=05e3, idProduct=0608 [ 1.436632] usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.436635] usb 3-4: Product: USB2.0 Hub [ 1.437074] hub 3-4:1.0: USB hub found [ 1.437312] hub 3-4:1.0: 4 ports detected [ 1.503207] tsc: Refined TSC clocksource calibration: 3309.719 MHz [ 1.503213] Switching to clocksource tsc [ 1.559134] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.561930] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359) [ 1.561934] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node f08328a0), AE_NOT_FOUND (20121018/psparse-537) [ 1.561940] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100 [ 1.565852] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359) [ 1.565855] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node f08328a0), AE_NOT_FOUND (20121018/psparse-537) [ 1.565862] ata4.00: configured for UDMA/100 [ 1.683687] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5 [ 1.707180] usb 3-4.1: new high-speed USB device number 3 using xhci_hcd [ 1.724257] usb 3-4.1: New USB device found, idVendor=05e3, idProduct=0608 [ 1.724262] usb 3-4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.724265] usb 3-4.1: Product: USB2.0 Hub [ 1.724722] hub 3-4.1:1.0: USB hub found [ 1.724988] hub 3-4.1:1.0: 4 ports detected [ 1.793934] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.793939] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.794089] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.794141] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 1.994767] usb 3-4.1.1: new low-speed USB device number 4 using xhci_hcd [ 2.018742] usb 3-4.1.1: New USB device found, idVendor=046d, idProduct=c030 [ 2.018747] usb 3-4.1.1: New USB device strings: Mfr=4, Product=32, SerialNumber=0 [ 2.018750] usb 3-4.1.1: Product: iFeel Mouse [ 2.018753] usb 3-4.1.1: Manufacturer: Logitech Inc. [ 2.018886] usb 3-4.1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.018889] usb 3-4.1.1: ep 0x1 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.024402] usbcore: registered new interface driver usbhid [ 2.024404] usbhid: USB HID core driver [ 2.025754] input: Logitech Inc. iFeel Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.1/3-4.1.1:1.0/input/input2 [ 2.025841] hid-generic 0003:046D:C030.0001: input,hidraw0: USB HID v1.00 Mouse [Logitech Inc. iFeel Mouse ] on usb-0000:00:14.0-4.1.1/input0 [ 2.090678] usb 3-4.1.2: new low-speed USB device number 5 using xhci_hcd [ 2.112409] usb 3-4.1.2: New USB device found, idVendor=0603, idProduct=00f2 [ 2.112415] usb 3-4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.112418] usb 3-4.1.2: Product: USB Keyboard [ 2.112420] usb 3-4.1.2: Manufacturer: NOVATEK [ 2.112528] usb 3-4.1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.112531] usb 3-4.1.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.115375] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.2/3-4.1.2:1.0/input/input3 [ 2.115552] hid-generic 0003:0603:00F2.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:14.0-4.1.2/input0 [ 2.121029] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.2/3-4.1.2:1.1/input/input4 [ 2.121159] hid-generic 0003:0603:00F2.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:14.0-4.1.2/input1 [ 2.190525] usb 3-4.1.3: new high-speed USB device number 6 using xhci_hcd [ 2.207233] usb 3-4.1.3: New USB device found, idVendor=1058, idProduct=1021 [ 2.207238] usb 3-4.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.207241] usb 3-4.1.3: Product: Ext HDD 1021 [ 2.207244] usb 3-4.1.3: Manufacturer: Western Digital [ 2.207246] usb 3-4.1.3: SerialNumber: 5743415A4131363732303230 [ 2.208796] Initializing USB Mass Storage driver... [ 2.208895] scsi6 : usb-storage 3-4.1.3:1.0 [ 2.208936] usbcore: registered new interface driver usb-storage [ 2.208937] USB Mass Storage support registered. [ 3.205865] scsi 6:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4 [ 3.206447] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 3.206679] sd 6:0:0:0: [sdc] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 3.207308] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled [ 3.207845] sd 6:0:0:0: [sdc] Asking for cache data failed [ 3.207847] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 3.208708] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled [ 3.209205] sd 6:0:0:0: [sdc] Asking for cache data failed [ 3.209206] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 3.209774] sdc: sdc1 sdc2 [ 3.210660] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled [ 3.211737] sd 6:0:0:0: [sdc] Asking for cache data failed [ 3.211739] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 3.211740] sd 6:0:0:0: [sdc] Attached SCSI disk [ 4.057428] xor: automatically using best checksumming function: [ 4.095883] avx : 28015.000 MB/sec [ 4.096192] device-mapper: dm-raid45: initialized v0.2594b [ 4.097224] md: linear personality registered for level -1 [ 4.098215] md: multipath personality registered for level -4 [ 4.099212] md: raid0 personality registered for level 0 [ 4.100268] md: raid1 personality registered for level 1 [ 4.101175] async_tx: api initialized (async) [ 4.167798] raid6: mmxx1 6159 MB/s [ 4.235707] raid6: mmxx2 6655 MB/s [ 4.303622] raid6: sse1x1 5160 MB/s [ 4.371535] raid6: sse1x2 6362 MB/s [ 4.439447] raid6: sse2x1 10415 MB/s [ 4.507359] raid6: sse2x2 13110 MB/s [ 4.507360] raid6: using algorithm sse2x2 (13110 MB/s) [ 4.507361] raid6: using ssse3x1 recovery algorithm [ 4.508134] md: raid6 personality registered for level 6 [ 4.508135] md: raid5 personality registered for level 5 [ 4.508136] md: raid4 personality registered for level 4 [ 4.510949] md: raid10 personality registered for level 10 [ 9.170325] bio: create slab at 1 [ 9.197188] bio: create slab at 1 [ 9.467690] EXT3-fs (dm-1): recovery required on readonly filesystem [ 9.467693] EXT3-fs (dm-1): write access will be enabled during recovery [ 16.689851] kjournald starting. Commit interval 5 seconds [ 16.706461] EXT3-fs (dm-1): recovery complete [ 16.706465] EXT3-fs (dm-1): mounted filesystem with ordered data mode [ 17.621797] init: ureadahead main process (570) terminated with status 5 [ 18.159962] Adding 499708k swap on /dev/mapper/lvm-swap. Priority:-1 extents:1 across:499708k [ 18.454170] EXT3-fs (dm-1): using internal journal [ 18.789858] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.957512] udevd[675]: starting version 175 [ 19.692465] kjournald starting. Commit interval 5 seconds [ 19.692703] EXT3-fs (sdb2): using internal journal [ 19.692707] EXT3-fs (sdb2): mounted filesystem with ordered data mode [ 19.763814] kjournald starting. Commit interval 5 seconds [ 19.764116] EXT3-fs (dm-3): using internal journal [ 19.764121] EXT3-fs (dm-3): mounted filesystem with ordered data mode [ 20.415772] lp: driver loaded but no devices found [ 20.795420] wmi: Mapper loaded [ 20.866948] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12 [ 20.875795] mei 0000:00:16.0: setting latency timer to 64 [ 20.875837] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 20.864185] asus_wmi: ASUS WMI generic driver loaded [ 21.041462] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251) [ 21.041467] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 21.041470] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 21.041472] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 21.041473] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 21.041474] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 21.041475] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 21.089372] device-mapper: multipath: version 1.5.1 loaded [ 21.270656] asus_wmi: Initialization: 0x0 [ 21.270669] asus_wmi: BIOS WMI version: 0.9asus_wmi: SFUN value: 0x0 [ 21.270864] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5 [ 21.271294] asus_wmi: Disabling ACPI video driver [ 21.387725] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12 [ 21.388527] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12 [ 21.389234] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12 [ 21.389980] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 21.969206] kvm: disabled by bios [ 21.973596] kvm: disabled by bios [ 21.977572] kvm: disabled by bios [ 22.084957] type=1400 audit(1383238626.710:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=919 comm="apparmor_parser" [ 22.084964] type=1400 audit(1383238626.710:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=935 comm="apparmor_parser" [ 22.085229] type=1400 audit(1383238626.714:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=919 comm="apparmor_parser" [ 22.085237] type=1400 audit(1383238626.714:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=935 comm="apparmor_parser" [ 22.085374] type=1400 audit(1383238626.714:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=919 comm="apparmor_parser" [ 22.085382] type=1400 audit(1383238626.714:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=935 comm="apparmor_parser" [ 22.154128] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 22.201332] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 22.201406] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 22.201444] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 22.201475] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 22.201505] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 22.201643] hda_intel: Disabling MSI [ 22.201647] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 22.249777] type=1400 audit(1383238626.878:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=1004 comm="apparmor_parser" [ 22.249929] type=1400 audit(1383238626.878:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1005 comm="apparmor_parser" [ 23.119865] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 23.119998] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 23.120127] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 23.120252] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 23.896837] r8169 0000:03:00.0 eth1: link down [ 23.896861] r8169 0000:03:00.0 eth1: link down [ 23.896878] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 24.215058] nvidia: module license 'NVIDIA' taints kernel. [ 24.220534] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 24.220585] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.88 Wed Mar 27 14:31:12 PDT 2013 [ 24.766214] ppdev: user-space parallel port driver [ 24.957356] Bluetooth: Core ver 2.16 [ 24.957376] NET: Registered protocol family 31 [ 24.957377] Bluetooth: HCI device and connection manager initialized [ 24.957390] Bluetooth: HCI socket layer initialized [ 24.957392] Bluetooth: L2CAP socket layer initialized [ 24.957394] Bluetooth: SCO socket layer initialized [ 25.018491] Bluetooth: RFCOMM TTY layer initialized [ 25.018498] Bluetooth: RFCOMM socket layer initialized [ 25.018499] Bluetooth: RFCOMM ver 1.11 [ 25.080498] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.080500] Bluetooth: BNEP filters: protocol multicast [ 25.080503] Bluetooth: BNEP socket layer initialized [ 25.275374] type=1400 audit(1383238629.910:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1223 comm="apparmor_parser" [ 25.275658] type=1400 audit(1383238629.910:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1223 comm="apparmor_parser" [ 25.575302] r8169 0000:03:00.0 eth1: link up [ 25.575308] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 26.415901] init: udev-fallback-graphics main process (1298) terminated with status 1 [ 31.730755] init: failsafe main process (1021) killed by TERM signal [ 32.298517] type=1400 audit(1383238636.938:12): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1808 comm="apparmor_parser" [ 32.298783] type=1400 audit(1383238636.938:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1808 comm="apparmor_parser" [ 32.298929] type=1400 audit(1383238636.938:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1808 comm="apparmor_parser" [ 32.300712] type=1400 audit(1383238636.942:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1812 comm="apparmor_parser" [ 32.301004] type=1400 audit(1383238636.942:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1812 comm="apparmor_parser" [ 32.428871] type=1400 audit(1383238637.070:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1807 comm="apparmor_parser" [ 32.429093] type=1400 audit(1383238637.070:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1807 comm="apparmor_parser" [ 32.455872] type=1400 audit(1383238637.094:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1811 comm="apparmor_parser" [ 32.456186] type=1400 audit(1383238637.098:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1811 comm="apparmor_parser" [ 32.481911] type=1400 audit(1383238637.122:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1813 comm="apparmor_parser" [ 34.748818] apm: BIOS not found. [ 34.979667] init: teamviewerd main process (1905) killed by TERM signal [ 34.979939] init: gdm main process (1915) killed by TERM signal [ 35.888090] init: mediatomb main process (1749) terminated with status 1 [ 35.888106] init: mediatomb main process ended, respawning [ 35.901494] init: mediatomb main process (2239) terminated with status 1 [ 35.901511] init: mediatomb main process ended, respawning [ 35.914801] init: mediatomb main process (2241) terminated with status 1 [ 35.914816] init: mediatomb main process ended, respawning [ 35.928252] init: mediatomb main process (2243) terminated with status 1 [ 35.928269] init: mediatomb main process ended, respawning [ 35.941809] init: mediatomb main process (2245) terminated with status 1 [ 35.941825] init: mediatomb main process ended, respawning [ 35.954994] init: mediatomb main process (2247) terminated with status 1 [ 35.955010] init: mediatomb main process ended, respawning [ 35.968266] init: mediatomb main process (2249) terminated with status 1 [ 35.968283] init: mediatomb main process ended, respawning [ 35.981914] init: mediatomb main process (2251) terminated with status 1 [ 35.981930] init: mediatomb main process ended, respawning [ 35.995383] init: mediatomb main process (2257) terminated with status 1 [ 35.995399] init: mediatomb main process ended, respawning [ 36.009107] init: mediatomb main process (2261) terminated with status 1 [ 36.009123] init: mediatomb main process ended, respawning [ 36.022481] init: mediatomb main process (2276) terminated with status 1 [ 36.022497] init: mediatomb respawning too fast, stopped [ 51.783595] init: plymouth-stop pre-start process (3047) terminated with status 1 [ 1113.488069] r8169 0000:03:00.0 eth1: link down [ 1113.488083] r8169 0000:03:00.0 eth1: link down [ 1113.488321] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 1115.124139] r8169 0000:03:00.0 eth1: link up [ 1115.124152] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 8600.539597] usb 3-4.2: new high-speed USB device number 7 using xhci_hcd [ 8600.570394] usb 3-4.2: New USB device found, idVendor=0bb4, idProduct=0ff9 [ 8600.570397] usb 3-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8600.570398] usb 3-4.2: Product: Android Phone [ 8600.570399] usb 3-4.2: Manufacturer: HTC [ 8600.570400] usb 3-4.2: SerialNumber: HT068PL00381 [ 8600.572040] scsi7 : usb-storage 3-4.2:1.0 [ 8601.573197] scsi 7:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [ 8601.574315] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 8601.580093] sd 7:0:0:0: [sdd] Attached SCSI removable disk [ 9219.619379] show_signal_msg: 33 callbacks suppressed [ 9219.619384] ntpd[6278]: segfault at 4 ip b76b9741 sp bfb484e0 error 4 in ntpd[b76a5000+95000] [ 9222.731983] r8169 0000:03:00.0 eth1: link down [ 9222.731994] r8169 0000:03:00.0 eth1: link down [ 9222.732169] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9224.401305] r8169 0000:03:00.0 eth1: link up [ 9224.401315] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 9326.823010] ntpd[9224]: segfault at 4 ip b76d2741 sp bfc04440 error 4 in ntpd[b76be000+95000] [ 9328.119382] r8169 0000:03:00.0 eth1: link down [ 9328.119402] r8169 0000:03:00.0 eth1: link down [ 9328.119876] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9329.777116] r8169 0000:03:00.0 eth1: link up [ 9329.777126] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 9995.613739] device eth1 entered promiscuous mode [10052.600325] device eth1 left promiscuous mode [10063.596512] device teredo entered promiscuous mode [10115.272604] device teredo left promiscuous mode [10116.625422] device teredo entered promiscuous mode [10201.187158] device teredo left promiscuous mode [10377.856324] device teredo entered promiscuous mode [10429.711523] device teredo left promiscuous mode [10700.243149] device teredo entered promiscuous mode [10715.036105] device teredo left promiscuous mode [10716.282796] device teredo entered promiscuous mode