[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-1-generic (buildd@crested) (gcc version 4.4.0 (Ubuntu 4.4.0-8ubuntu2) ) #14-Ubuntu SMP Thu Jul 2 16:02:38 UTC 2009 (Ubuntu 2.6.31-1.14-generic) [ 0.000000] Command line: root=UUID=C41463FE1463F23A loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097000 (usable) [ 0.000000] BIOS-e820: 0000000000097000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask F80000000 write-back [ 0.000000] 2 base 180000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 4 base 0BFF00000 mask FFFF00000 write-through [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000097000 (usable) [ 0.000000] modified: 0000000000097000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] modified: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 00000001c0000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfee0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfee0000 page 4k [ 0.000000] kernel direct mapping tables up to bfee0000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001c0000000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0100000000 - 01c0000000 page 2M [ 0.000000] kernel direct mapping tables up to 1c0000000 @ 13000-1b000 [ 0.000000] RAMDISK: 7f86a000 - 7ffeffa3 [ 0.000000] ACPI: RSDP 00000000000f7350 00014 (v00 IntelR) [ 0.000000] ACPI: RSDT 00000000bfee3040 00030 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000bfee30c0 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000bfee3180 047EF (v01 INTELR AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000bfee0000 00040 [ 0.000000] ACPI: MCFG 00000000bfee7ac0 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000bfee79c0 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000001c0000000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000001c0000000 [ 0.000000] NODE_DATA [0000000000016000 - 000000000001afff] [ 0.000000] bootmap [000000000001b000 - 0000000000052fff] pages 38 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01c0000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019a87cc] TEXT DATA BSS ==> [0001000000 - 00019a87cc] [ 0.000000] #3 [007f86a000 - 007ffeffa3] RAMDISK ==> [007f86a000 - 007ffeffa3] [ 0.000000] #4 [0000097000 - 0000100000] BIOS reserved ==> [0000097000 - 0000100000] [ 0.000000] #5 [00019a9000 - 00019a90c2] BRK ==> [00019a9000 - 00019a90c2] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 0000016000] PGTABLE ==> [0000013000 - 0000016000] [ 0.000000] found SMP MP-table at [ffff8800000f3450] f3450 [ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD -> [ffff880028600000-ffff88002d9fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001c0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000097 [ 0.000000] 0: 0x00000100 -> 0x000bfee0 [ 0.000000] 0: 0x00100000 -> 0x001c0000 [ 0.000000] On node 0 totalpages: 1572455 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 114 pages reserved [ 0.000000] DMA zone: 3805 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767768 pages, LIFO batch:31 [ 0.000000] Normal zone: 10752 pages used for memmap [ 0.000000] Normal zone: 775680 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000 [ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000 [ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000 [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages at ffff880028034000, static data 89888 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1547253 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=C41463FE1463F23A loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 6119472k/7340032k available (5228k kernel code, 1050212k absent, 170348k reserved, 2784k data, 648k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3191.931 MHz processor. [ 0.001895] Console: colour VGA+ 80x25 [ 0.001899] console [tty0] enabled [ 0.004000] allocated 62914560 bytes of page_cgroup [ 0.004000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 6383.86 BogoMIPS (lpj=12767724) [ 0.004044] Security Framework initialized [ 0.004052] SELinux: Disabled at boot. [ 0.005185] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.010173] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012429] Mount-cache hash table entries: 256 [ 0.012618] Initializing cgroup subsys ns [ 0.012623] Initializing cgroup subsys cpuacct [ 0.012627] Initializing cgroup subsys memory [ 0.012635] Initializing cgroup subsys freezer [ 0.012637] Initializing cgroup subsys net_cls [ 0.012659] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.012663] CPU: L2 cache: 1024K [ 0.012667] CPU 0/0x0 -> Node 0 [ 0.012670] CPU: Physical Processor ID: 0 [ 0.012673] CPU: Processor Core ID: 0 [ 0.012677] using mwait in idle threads. [ 0.012679] Performance Counters: no PMU driver, software counters only. [ 0.015318] ACPI: Core revision 20090521 [ 0.024065] Setting APIC routing to flat [ 0.024380] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067114] CPU0: Intel(R) Pentium(R) D CPU 2.66GHz stepping 07 [ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 6384.57 BogoMIPS (lpj=12769147) [ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.004000] CPU: L2 cache: 1024K [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.152367] CPU1: Intel(R) Pentium(R) D CPU 2.66GHz stepping 07 [ 0.152377] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.156018] Brought up 2 CPUs [ 0.156022] Total of 2 processors activated (12768.43 BogoMIPS). [ 0.156076] CPU0 attaching sched-domain: [ 0.156080] domain 0: span 0-1 level CPU [ 0.156084] groups: 0 1 [ 0.156090] CPU1 attaching sched-domain: [ 0.156093] domain 0: span 0-1 level CPU [ 0.156095] groups: 1 0 [ 0.156172] Booting paravirtualized kernel on bare hardware [ 0.156180] regulator: core version 0.5 [ 0.156180] Time: 4:41:20 Date: 07/06/09 [ 0.156180] NET: Registered protocol family 16 [ 0.156180] ACPI: bus type pci registered [ 0.156180] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.156180] PCI: MCFG area at e0000000 reserved in E820 [ 0.160518] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.160521] PCI: Using configuration type 1 for base access [ 0.160543] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.160543] mtrr: probably your BIOS does not setup all CPUs. [ 0.160543] mtrr: corrected configuration. [ 0.164035] bio: create slab at 0 [ 0.164753] ACPI: EC: Look up EC in DSDT [ 0.173839] ACPI: Interpreter enabled [ 0.173844] ACPI: (supports S0 S3 S4 S5) [ 0.173875] ACPI: Using IOAPIC for interrupt routing [ 0.180202] ACPI: No dock devices found. [ 0.180347] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.180389] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.180389] pci 0000:00:01.0: PME# disabled [ 0.180389] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.180389] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.180389] pci 0000:00:1b.0: PME# disabled [ 0.180389] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.180389] pci 0000:00:1c.0: PME# disabled [ 0.180410] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.180415] pci 0000:00:1c.1: PME# disabled [ 0.180489] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.180494] pci 0000:00:1c.4: PME# disabled [ 0.180549] pci 0000:00:1d.0: reg 20 io port: [0xff00-0xff1f] [ 0.180606] pci 0000:00:1d.1: reg 20 io port: [0xfe00-0xfe1f] [ 0.180663] pci 0000:00:1d.2: reg 20 io port: [0xfd00-0xfd1f] [ 0.180720] pci 0000:00:1d.3: reg 20 io port: [0xfc00-0xfc1f] [ 0.180775] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] [ 0.180827] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.180832] pci 0000:00:1d.7: PME# disabled [ 0.180968] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.180975] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.180979] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.180984] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 00e0 (mask 000f) [ 0.181039] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.181046] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.181054] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.181061] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.181069] pci 0000:00:1f.1: reg 20 io port: [0xfb00-0xfb0f] [ 0.181123] pci 0000:00:1f.2: reg 10 io port: [0xfa00-0xfa07] [ 0.181130] pci 0000:00:1f.2: reg 14 io port: [0xf900-0xf903] [ 0.181137] pci 0000:00:1f.2: reg 18 io port: [0xf800-0xf807] [ 0.181144] pci 0000:00:1f.2: reg 1c io port: [0xf700-0xf703] [ 0.181151] pci 0000:00:1f.2: reg 20 io port: [0xf600-0xf60f] [ 0.181158] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff] [ 0.181187] pci 0000:00:1f.2: PME# supported from D3hot [ 0.181191] pci 0000:00:1f.2: PME# disabled [ 0.181245] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.181308] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.181319] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xdfffffff] [ 0.181329] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff] [ 0.181340] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.181412] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] [ 0.181416] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfcffffff] [ 0.181422] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff] [ 0.181491] pci 0000:02:00.0: reg 10 64bit mmio: [0xfdaff000-0xfdaff07f] [ 0.181509] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdaf8000-0xfdafbfff] [ 0.181519] pci 0000:02:00.0: reg 20 io port: [0xaf00-0xaf7f] [ 0.181538] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.181582] pci 0000:02:00.0: supports D1 D2 [ 0.181643] pci 0000:00:1c.0: bridge io port: [0xa000-0xafff] [ 0.181648] pci 0000:00:1c.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.181655] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff] [ 0.181722] pci 0000:03:00.0: reg 10 64bit mmio: [0xfdef0000-0xfdefffff] [ 0.181802] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.181807] pci 0000:03:00.0: PME# disabled [ 0.181863] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff] [ 0.181868] pci 0000:00:1c.1: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.181875] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.181942] pci 0000:04:00.0: reg 10 64bit mmio: [0xfdcf0000-0xfdcfffff] [ 0.182020] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.182026] pci 0000:04:00.0: PME# disabled [ 0.182082] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] [ 0.182086] pci 0000:00:1c.4: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.182093] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.182137] pci 0000:05:02.0: reg 10 32bit mmio: [0xfd9ff000-0xfd9ff7ff] [ 0.182146] pci 0000:05:02.0: reg 14 32bit mmio: [0xfd9f8000-0xfd9fbfff] [ 0.182195] pci 0000:05:02.0: supports D1 D2 [ 0.182198] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot [ 0.182203] pci 0000:05:02.0: PME# disabled [ 0.182245] pci 0000:05:05.0: reg 10 32bit mmio: [0xfd9e0000-0xfd9effff] [ 0.182345] pci 0000:00:1e.0: transparent bridge [ 0.182351] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] [ 0.182356] pci 0000:00:1e.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff] [ 0.182363] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff] [ 0.182393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.182545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.182618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.182697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.182772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.200354] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 9 *10 11 12 14 15) [ 0.200354] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *5 7 9 10 11 12 14 15) [ 0.200386] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 9 10 *11 12 14 15) [ 0.200522] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 9 10 *11 12 14 15) [ 0.200657] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.200794] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 *7 9 10 11 12 14 15) [ 0.200930] ACPI: PCI Interrupt Link [LNK0] (IRQs 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.201067] ACPI: PCI Interrupt Link [LNK1] (IRQs *4 5 7 9 10 11 12 14 15) [ 0.201133] SCSI subsystem initialized [ 0.201133] libata version 3.00 loaded. [ 0.201133] usbcore: registered new interface driver usbfs [ 0.201133] usbcore: registered new interface driver hub [ 0.201133] usbcore: registered new device driver usb [ 0.201133] ACPI: WMI: Mapper loaded [ 0.201133] PCI: Using ACPI for IRQ routing [ 0.220013] Bluetooth: Core ver 2.15 [ 0.220041] NET: Registered protocol family 31 [ 0.220044] Bluetooth: HCI device and connection manager initialized [ 0.220047] Bluetooth: HCI socket layer initialized [ 0.220050] NET: Registered protocol family 8 [ 0.220052] NET: Registered protocol family 20 [ 0.220071] NetLabel: Initializing [ 0.220071] NetLabel: domain hash size = 128 [ 0.220071] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.220071] NetLabel: unlabeled traffic allowed by default [ 0.220135] hpet clockevent registered [ 0.220143] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.220148] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.220155] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.244016] pnp: PnP ACPI init [ 0.244040] ACPI: bus type pnp registered [ 0.247451] pnp: PnP ACPI: found 11 devices [ 0.247455] ACPI: ACPI bus type pnp unregistered [ 0.247469] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.247472] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.247481] system 00:06: ioport range 0x400-0x4bf could not be reserved [ 0.247489] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved [ 0.247496] system 00:0a: iomem range 0xda000-0xdbfff has been reserved [ 0.247500] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved [ 0.247503] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [ 0.247506] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [ 0.247510] system 00:0a: iomem range 0xbfee0000-0xbfefffff could not be reserved [ 0.247513] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.247516] system 00:0a: iomem range 0x100000-0xbfedffff could not be reserved [ 0.247520] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.247523] system 00:0a: iomem range 0xfed13000-0xfed1dfff has been reserved [ 0.247527] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.247530] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.247533] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.247537] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved [ 0.247540] system 00:0a: iomem range 0xe0000-0xeffff has been reserved [ 0.252771] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.252775] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.252780] pci 0000:00:01.0: MEM window: 0xfa000000-0xfcffffff [ 0.252785] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff [ 0.252792] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.252796] pci 0000:00:1c.0: IO window: 0xa000-0xafff [ 0.252802] pci 0000:00:1c.0: MEM window: 0xfda00000-0xfdafffff [ 0.252807] pci 0000:00:1c.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff [ 0.252814] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.252818] pci 0000:00:1c.1: IO window: 0xe000-0xefff [ 0.252824] pci 0000:00:1c.1: MEM window: 0xfde00000-0xfdefffff [ 0.252828] pci 0000:00:1c.1: PREFETCH window: 0x000000fdd00000-0x000000fddfffff [ 0.252836] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 [ 0.252839] pci 0000:00:1c.4: IO window: 0xd000-0xdfff [ 0.252845] pci 0000:00:1c.4: MEM window: 0xfdc00000-0xfdcfffff [ 0.252850] pci 0000:00:1c.4: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 0.252858] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.252861] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.252867] pci 0000:00:1e.0: MEM window: 0xfd900000-0xfd9fffff [ 0.252872] pci 0000:00:1e.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff [ 0.252887] alloc irq_desc for 16 on node 0 [ 0.252890] alloc kstat_irqs on node 0 [ 0.252897] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.252902] pci 0000:00:01.0: setting latency timer to 64 [ 0.252911] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.252916] pci 0000:00:1c.0: setting latency timer to 64 [ 0.252923] alloc irq_desc for 17 on node 0 [ 0.252925] alloc kstat_irqs on node 0 [ 0.252930] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.252934] pci 0000:00:1c.1: setting latency timer to 64 [ 0.252943] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.252949] pci 0000:00:1c.4: setting latency timer to 64 [ 0.252957] pci 0000:00:1e.0: setting latency timer to 64 [ 0.252962] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.252965] pci_bus 0000:00: resource 1 mem: [0x000000-0xfffffffff] [ 0.252968] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.252971] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff] [ 0.252974] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff] [ 0.252976] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.252979] pci_bus 0000:02: resource 1 mem: [0xfda00000-0xfdafffff] [ 0.252982] pci_bus 0000:02: resource 2 pref mem [0xfd700000-0xfd7fffff] [ 0.252985] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.252987] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.252990] pci_bus 0000:03: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.252993] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.252995] pci_bus 0000:04: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.252998] pci_bus 0000:04: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.253001] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 0.253004] pci_bus 0000:05: resource 1 mem: [0xfd900000-0xfd9fffff] [ 0.253006] pci_bus 0000:05: resource 2 pref mem [0xfd800000-0xfd8fffff] [ 0.253009] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.253012] pci_bus 0000:05: resource 4 mem: [0x000000-0xfffffffff] [ 0.253060] NET: Registered protocol family 2 [ 0.253433] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.255776] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.260303] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.260839] TCP: Hash tables configured (established 524288 bind 65536) [ 0.260844] TCP reno registered [ 0.260982] NET: Registered protocol family 1 [ 0.261074] Trying to unpack rootfs image as initramfs... [ 0.472442] Freeing initrd memory: 7703k freed [ 0.477577] Scanning for low memory corruption every 60 seconds [ 0.477926] audit: initializing netlink socket (disabled) [ 0.477943] type=2000 audit(1246855280.476:1): initialized [ 0.486264] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.489911] VFS: Disk quotas dquot_6.5.2 [ 0.490037] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.491531] fuse init (API version 7.11) [ 0.491764] msgmni has been set to 11967 [ 0.492080] alg: No test for stdrng (krng) [ 0.492096] io scheduler noop registered [ 0.492099] io scheduler anticipatory registered [ 0.492102] io scheduler deadline registered [ 0.492201] io scheduler cfq registered (default) [ 0.492317] pci 0000:01:00.0: Boot video device [ 0.492527] alloc irq_desc for 24 on node 0 [ 0.492530] alloc kstat_irqs on node 0 [ 0.492540] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.492548] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.492770] alloc irq_desc for 25 on node 0 [ 0.492772] alloc kstat_irqs on node 0 [ 0.492781] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.492790] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.493063] alloc irq_desc for 26 on node 0 [ 0.493065] alloc kstat_irqs on node 0 [ 0.493074] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.493083] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.493352] alloc irq_desc for 27 on node 0 [ 0.493355] alloc kstat_irqs on node 0 [ 0.493363] pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X [ 0.493373] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.493675] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.493925] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.494297] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.494301] ACPI: Power Button [PWRF] [ 0.494396] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.494400] ACPI: Power Button [PWRB] [ 0.494890] processor LNXCPU:00: registered as cooling_device0 [ 0.494977] processor LNXCPU:01: registered as cooling_device1 [ 0.499655] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.499666] ACPI: Thermal Zone [THRM] (20 C) [ 0.504416] Linux agpgart interface v0.103 [ 0.504422] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.504875] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 0.507742] brd: module loaded [ 0.509572] loop: module loaded [ 0.509796] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.510085] ahci 0000:00:1f.2: version 3.0 [ 0.510104] alloc irq_desc for 19 on node 0 [ 0.510106] alloc kstat_irqs on node 0 [ 0.510114] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.510153] alloc irq_desc for 28 on node 0 [ 0.510155] alloc kstat_irqs on node 0 [ 0.510165] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 0.510233] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode [ 0.510237] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part [ 0.510242] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.510544] scsi0 : ahci [ 0.510746] scsi1 : ahci [ 0.510892] scsi2 : ahci [ 0.511037] scsi3 : ahci [ 0.511250] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 28 [ 0.511254] ata2: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 28 [ 0.511258] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 28 [ 0.511261] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 28 [ 0.511577] ata_piix 0000:00:1f.1: version 2.13 [ 0.511591] alloc irq_desc for 18 on node 0 [ 0.511594] alloc kstat_irqs on node 0 [ 0.511601] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.511648] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.511729] scsi4 : ata_piix [ 0.511873] scsi5 : ata_piix [ 0.512693] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14 [ 0.512697] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15 [ 0.512958] ata6: port disabled. ignoring. [ 0.513150] sata_sil24 0000:02:00.0: version 1.1 [ 0.513165] sata_sil24 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.513242] sata_sil24 0000:02:00.0: setting latency timer to 64 [ 0.513430] scsi6 : sata_sil24 [ 0.513584] scsi7 : sata_sil24 [ 0.513698] ata7: SATA max UDMA/100 host m128@0xfdaff000 port 0xfdaf8000 irq 16 [ 0.513703] ata8: SATA max UDMA/100 host m128@0xfdaff000 port 0xfdafa000 irq 16 [ 0.516110] Fixed MDIO Bus: probed [ 0.516118] PPP generic driver version 2.4.2 [ 0.516449] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.516500] alloc irq_desc for 23 on node 0 [ 0.516503] alloc kstat_irqs on node 0 [ 0.516511] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.516527] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.516532] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.516617] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.520547] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 0.520566] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 [ 0.536027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.536169] usb usb1: configuration #1 chosen from 1 choice [ 0.536251] hub 1-0:1.0: USB hub found [ 0.536261] hub 1-0:1.0: 8 ports detected [ 0.536397] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.536465] uhci_hcd: USB Universal Host Controller Interface driver [ 0.536625] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.536635] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.536639] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.536726] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.536754] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00 [ 0.536895] usb usb2: configuration #1 chosen from 1 choice [ 0.536973] hub 2-0:1.0: USB hub found [ 0.536982] hub 2-0:1.0: 2 ports detected [ 0.537073] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.537082] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.537086] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.537167] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.537202] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00 [ 0.537336] usb usb3: configuration #1 chosen from 1 choice [ 0.537412] hub 3-0:1.0: USB hub found [ 0.537421] hub 3-0:1.0: 2 ports detected [ 0.537507] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.537514] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.537517] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.537599] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.537632] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00 [ 0.537770] usb usb4: configuration #1 chosen from 1 choice [ 0.537849] hub 4-0:1.0: USB hub found [ 0.537858] hub 4-0:1.0: 2 ports detected [ 0.537944] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.537952] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.537956] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.538037] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.538062] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00 [ 0.538205] usb usb5: configuration #1 chosen from 1 choice [ 0.538279] hub 5-0:1.0: USB hub found [ 0.538287] hub 5-0:1.0: 2 ports detected [ 0.538533] usbcore: registered new interface driver usbserial [ 0.538591] USB Serial support registered for generic [ 0.538663] usbcore: registered new interface driver usbserial_generic [ 0.538666] usbserial: USB Serial Driver core [ 0.538903] PNP: No PS/2 controller found. Probing ports directly. [ 0.538917] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 0.541653] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.541661] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.541922] mice: PS/2 mouse device common for all mice [ 0.542180] rtc_cmos 00:03: RTC can wake from S4 [ 0.542264] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.542291] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.542542] device-mapper: uevent: version 1.0.3 [ 0.542717] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.542822] device-mapper: multipath: version 1.1.0 loaded [ 0.542826] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.543072] cpuidle: using governor ladder [ 0.543075] cpuidle: using governor menu [ 0.543593] TCP cubic registered [ 0.543910] NET: Registered protocol family 10 [ 0.544397] lo: Disabled Privacy Extensions [ 0.544748] NET: Registered protocol family 17 [ 0.544813] Bluetooth: L2CAP ver 2.13 [ 0.544816] Bluetooth: L2CAP socket layer initialized [ 0.544820] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.544822] Bluetooth: SCO socket layer initialized [ 0.544856] Bluetooth: RFCOMM socket layer initialized [ 0.544864] Bluetooth: RFCOMM TTY layer initialized [ 0.544866] Bluetooth: RFCOMM ver 1.11 [ 0.545112] PM: Resume from disk failed. [ 0.545128] registered taskstats version 1 [ 0.545273] Magic number: 1:11:666 [ 0.545363] rtc_cmos 00:03: setting system clock to 2009-07-06 04:41:21 UTC (1246855281) [ 0.545368] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.545370] EDD information not available. [ 0.720438] Switched to high resolution mode on CPU 1 [ 0.724039] Switched to high resolution mode on CPU 0 [ 0.828519] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.828541] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.828569] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.828586] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.829263] ata4.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133 [ 0.829267] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.829292] ata3.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133 [ 0.829295] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.830041] ata4.00: configured for UDMA/133 [ 0.830055] ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 [ 0.830108] ata4: irq_stat 0x00400040, connection status changed [ 0.830161] ata4: hard resetting link [ 0.830185] ata3.00: configured for UDMA/133 [ 0.830195] ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 [ 0.830246] ata3: irq_stat 0x00400040, connection status changed [ 0.830297] ata3: hard resetting link [ 0.830578] ata2.00: ATAPI: PIONEER DVD-RW DVR-216, 1.04, max UDMA/66 [ 0.832898] ata2.00: configured for UDMA/66 [ 0.844805] ata1.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133 [ 0.844809] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 1) [ 0.845519] ata1.00: configured for UDMA/133 [ 0.845643] scsi 0:0:0:0: Direct-Access ATA WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5 [ 0.846014] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.846077] sd 0:0:0:0: [sda] Write Protect is off [ 0.846080] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.846112] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.846273] sda: [ 0.846331] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.848516] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.852085] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-216 1.04 PQ: 0 ANSI: 5 [ 0.853231] sda1 sda2 [ 0.853787] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.870299] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.870303] Uniform CD-ROM driver Revision: 3.20 [ 0.870480] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.870626] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 0.984601] usb 1-1: configuration #1 chosen from 1 choice [ 1.384012] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 1.552022] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.552041] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.553486] ata3.00: configured for UDMA/133 [ 1.553497] ata3: EH complete [ 1.553589] scsi 2:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 [ 1.553637] ata4.00: configured for UDMA/133 [ 1.553642] ata4: EH complete [ 1.553897] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.553959] sd 2:0:0:0: [sdb] Write Protect is off [ 1.553962] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.553994] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.554149] sdb: [ 1.554275] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.554358] scsi 3:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 [ 1.554636] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.554696] sd 3:0:0:0: [sdc] Write Protect is off [ 1.554699] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.554731] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.554882] sdc: [ 1.554993] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.566921] usb 2-2: configuration #1 chosen from 1 choice [ 1.569629] sdc1 [ 1.570053] sdb1 [ 1.570235] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.570518] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.760031] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 0) [ 2.807272] ata7.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133 [ 2.807276] ata7.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.865590] ata7.00: configured for UDMA/100 [ 2.865679] scsi 6:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 2.866014] sd 6:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.866074] sd 6:0:0:0: [sdd] Write Protect is off [ 2.866077] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.866109] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.866261] sdd: [ 2.866382] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 2.905260] sdd1 sdd2 [ 2.905790] sd 6:0:0:0: [sdd] Attached SCSI disk [ 4.944025] ata8: SATA link down (SStatus 0 SControl 0) [ 4.944064] Freeing unused kernel memory: 648k freed [ 4.944406] Write protecting the kernel read-only data: 7460k [ 5.060209] [drm] Initialized drm 1.1.0 20060810 [ 5.250951] usbcore: registered new interface driver hiddev [ 5.253008] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8 [ 5.253346] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.1/input/input3 [ 5.253441] generic-usb 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-1/input1 [ 5.253543] usbcore: registered new interface driver usbhid [ 5.253547] usbhid: v2.6:USB HID core driver [ 5.262505] tg3.c:v3.99 (April 20, 2009) [ 5.262527] tg3 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.262539] tg3 0000:03:00.0: setting latency timer to 64 [ 5.272198] tg3 0000:03:00.0: PME# disabled [ 5.307928] eth0: Tigon3 [partno(BCM95789) rev 4101] (PCI Express) MAC address 00:50:8d:7d:25:f3 [ 5.307933] eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 5.307937] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 5.307940] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 5.308051] tg3 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.308064] tg3 0000:04:00.0: setting latency timer to 64 [ 5.318645] tg3 0000:04:00.0: PME# disabled [ 5.355961] eth1: Tigon3 [partno(BCM95789) rev 4101] (PCI Express) MAC address 00:50:8d:7d:25:f2 [ 5.355966] eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 5.355970] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 5.355973] eth1: dma_rwctrl[76180000] dma_mask[64-bit] [ 5.356177] ohci1394 0000:05:02.0: enabling device (0000 -> 0002) [ 5.356189] ohci1394 0000:05:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.356199] ohci1394 0000:05:02.0: setting latency timer to 64 [ 5.413262] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fd9ff000-fd9ff7ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 5.426203] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4 [ 5.426291] logitech 0003:046D:C513.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0 [ 5.430921] logitech 0003:046D:C513.0003: fixing up Logitech keyboard report descriptor [ 5.431572] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input5 [ 5.431728] logitech 0003:046D:C513.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1 [ 6.457456] EXT3-fs: INFO: recovery required on readonly filesystem. [ 6.457461] EXT3-fs: write access will be enabled during recovery. [ 6.688272] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d0000722c1c] [ 6.958113] kjournald starting. Commit interval 5 seconds [ 6.958129] EXT3-fs: loop0: orphan cleanup on readonly fs [ 6.958138] ext3_orphan_cleanup: deleting unreferenced inode 811012 [ 6.958172] ext3_orphan_cleanup: deleting unreferenced inode 811022 [ 6.958182] ext3_orphan_cleanup: deleting unreferenced inode 811021 [ 6.958190] ext3_orphan_cleanup: deleting unreferenced inode 811020 [ 6.958199] ext3_orphan_cleanup: deleting unreferenced inode 811019 [ 6.958207] EXT3-fs: loop0: 5 orphan inodes deleted [ 6.958210] EXT3-fs: recovery complete. [ 6.959247] EXT3-fs: mounted filesystem with writeback data mode. [ 11.971377] udev: starting version 144 [ 13.827751] nvidia: module license 'NVIDIA' taints kernel. [ 13.827757] Disabling lock debugging due to kernel taint [ 14.082620] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.082630] nvidia 0000:01:00.0: setting latency timer to 64 [ 14.083145] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.14 Wed May 27 01:23:47 PDT 2009 [ 14.340075] cfg80211: Calling CRDA to update world regulatory domain [ 14.381197] intel_rng: FWH not detected [ 14.402944] Platform driver 'pcspkr' needs updating - please use dev_pm_ops [ 14.403016] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 14.567673] cfg80211: World regulatory domain updated: [ 14.567679] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.567682] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.567686] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.567689] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.567692] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.567695] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.596319] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state. [ 14.596394] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 14.596704] DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick) [ 14.613663] iTCO_vendor_support: vendor-support=0 [ 14.615070] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 14.615187] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 14.615256] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.695698] alloc irq_desc for 21 on node 0 [ 14.695703] alloc kstat_irqs on node 0 [ 14.695713] ath5k 0000:05:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.695791] ath5k 0000:05:05.0: registered as 'phy0' [ 14.885478] ath: EEPROM regdomain: 0x809c [ 14.885481] ath: EEPROM indicates we should expect a country code [ 14.885483] ath: doing EEPROM country->regdmn map search [ 14.885486] ath: country maps to regdmn code: 0x52 [ 14.885488] ath: Country alpha2 being used: CN [ 14.885490] ath: Regpair used: 0x52 [ 14.915236] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.915284] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 14.924538] phy0: Selected rate control algorithm 'minstrel' [ 14.925311] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45) [ 14.926289] cfg80211: Calling CRDA for country: CN [ 14.928576] cfg80211: Regulatory domain changed to country: CN [ 14.928581] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.928584] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 14.928587] (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 15.010459] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 15.010649] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 15.170457] af9013: firmware version:5.1.0 [ 15.173959] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 15.195710] MT2060: successfully identified (IF1 = 1220) [ 15.667597] dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected. [ 15.674388] usbcore: registered new interface driver dvb_usb_af9015 [ 15.822800] lp: driver loaded but no devices found [ 16.490944] EXT3 FS on loop0, internal journal [ 21.014338] Adding 262136k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262136k [ 29.578344] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 29.578348] Bluetooth: BNEP filters: protocol multicast [ 29.627152] Bridge firewalling registered [ 33.589187] ppdev: user-space parallel port driver [ 36.048243] tg3 0000:04:00.0: PME# disabled [ 36.211179] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 36.459128] tg3 0000:03:00.0: PME# disabled