[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=112f2a44-ad93-4e66-8243-225f59538ddd ro quiet splash vt.handoff=7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7de0000 (usable) [ 0.000000] BIOS-e820: 00000000c7de0000 - 00000000c7de3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7de3000 - 00000000c7df0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7df0000 - 00000000c7e00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA785GM-US2H/GA-MA785GM-US2H, BIOS F2 06/22/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back [ 0.000000] 3 base 0000C7E00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back [ 0.000000] 6 base 000220000000 mask FFFFF0000000 write-back [ 0.000000] 7 base 000230000000 mask FFFFF8000000 write-back [ 0.000000] TOM2: 0000000238000000 aka 9088M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c7e00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xc7de0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5880] f5880 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7de0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00c7c00000 page 2M [ 0.000000] 00c7c00000 - 00c7de0000 page 4k [ 0.000000] kernel direct mapping tables up to c7de0000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0238000000 page 2M [ 0.000000] kernel direct mapping tables up to 238000000 @ c7dde000-c7de0000 [ 0.000000] RAMDISK: 366e2000 - 37369000 [ 0.000000] ACPI: RSDP 00000000000f7220 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000c7de3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000c7de3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000c7de30c0 06E8F (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000c7de0000 00040 [ 0.000000] ACPI: SSDT 00000000c7dea040 00544 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000c7dea5c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000c7dea600 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 00000000c7dea640 0029A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000c7de9f80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000238000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000238000000 [ 0.000000] NODE_DATA [0000000237ffb000 - 0000000237ffffff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff88022fe00000-ffff880236ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00238000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000c7de0 [ 0.000000] 0: 0x00100000 -> 0x00238000 [ 0.000000] On node 0 totalpages: 2096495 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 800280 pages, LIFO batch:31 [ 0.000000] Normal zone: 17472 pages used for memmap [ 0.000000] Normal zone: 1260480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000c7de0000 - 00000000c7de3000 [ 0.000000] PM: Registered nosave memory: 00000000c7de3000 - 00000000c7df0000 [ 0.000000] PM: Registered nosave memory: 00000000c7df0000 - 00000000c7e00000 [ 0.000000] PM: Registered nosave memory: 00000000c7e00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c7e00000 (gap: c7e00000:18200000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800c7a00000 s84416 r8192 d22080 u524288 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064681 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=112f2a44-ad93-4e66-8243-225f59538ddd ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ bc000000 [ 0.000000] PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000 [ 0.000000] Memory: 8110864k/9306112k available (5940k kernel code, 920132k absent, 275116k reserved, 5017k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2611.931 MHz processor. [ 0.020003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.86 BogoMIPS (lpj=26119310) [ 0.020007] pid_max: default: 32768 minimum: 301 [ 0.020031] Security Framework initialized [ 0.020044] AppArmor: AppArmor initialized [ 0.020046] Yama: becoming mindful. [ 0.021068] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.024107] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.025328] Mount-cache hash table entries: 256 [ 0.025446] Initializing cgroup subsys ns [ 0.025449] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.025451] Initializing cgroup subsys cpuacct [ 0.025455] Initializing cgroup subsys memory [ 0.025463] Initializing cgroup subsys devices [ 0.025466] Initializing cgroup subsys freezer [ 0.025467] Initializing cgroup subsys net_cls [ 0.025469] Initializing cgroup subsys blkio [ 0.025498] tseg: 00c7e00000 [ 0.025500] CPU: Physical Processor ID: 0 [ 0.025501] CPU: Processor Core ID: 0 [ 0.025503] mce: CPU supports 6 MCE banks [ 0.025512] using C1E aware idle routine [ 0.026938] ACPI: Core revision 20110112 [ 0.030034] ftrace: allocating 24314 entries in 96 pages [ 0.040063] Setting APIC routing to flat [ 0.040556] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.142600] CPU0: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03 [ 0.150000] Performance Events: AMD PMU driver. [ 0.150000] ... version: 0 [ 0.150000] ... bit width: 48 [ 0.150000] ... generic registers: 4 [ 0.150000] ... value mask: 0000ffffffffffff [ 0.150000] ... max period: 00007fffffffffff [ 0.150000] ... fixed-purpose events: 0 [ 0.150000] ... event mask: 000000000000000f [ 0.150000] Booting Node 0, Processors #1 [ 0.310015] System has AMD C1E enabled [ 0.310035] Switch to broadcast mode on CPU1 [ 0.310063] #2 [ 0.480018] Switch to broadcast mode on CPU2 [ 0.480059] #3 Ok. [ 0.650006] Brought up 4 CPUs [ 0.650008] Total of 4 processors activated (20894.83 BogoMIPS). [ 0.650018] Switch to broadcast mode on CPU3 [ 0.650967] Switch to broadcast mode on CPU0 [ 0.650967] devtmpfs: initialized [ 0.650967] print_constraints: dummy: [ 0.650967] Time: 23:06:31 Date: 04/15/11 [ 0.650967] NET: Registered protocol family 16 [ 0.651031] node 0 link 0: io port [b000, ffff] [ 0.651034] TOM: 00000000c8000000 aka 3200M [ 0.651036] Fam 10h mmconf [e0000000, e00fffff] [ 0.651038] node 0 link 0: mmio [a0000, bffff] [ 0.651040] node 0 link 0: mmio [c8000000, dfffffff] [ 0.651043] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.651045] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff] [ 0.651048] TOM2: 0000000238000000 aka 9088M [ 0.651050] bus: [00, 04] on node 0 link 0 [ 0.651053] bus: 00 index 0 [io 0x0000-0xffff] [ 0.651055] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.651057] bus: 00 index 2 [mem 0xc8000000-0xdfffffff] [ 0.651058] bus: 00 index 3 [mem 0xe0500000-0xffffffff] [ 0.651060] bus: 00 index 4 [mem 0xe0100000-0xe04fffff] [ 0.651062] bus: 00 index 5 [mem 0x238000000-0xfcffffffff] [ 0.651071] Extended Config Space enabled on 1 nodes [ 0.650967] Trying to unpack rootfs image as initramfs... [ 0.651092] ACPI: bus type pci registered [ 0.651155] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.651158] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.672530] PCI: Using configuration type 1 for base access [ 0.673098] bio: create slab at 0 [ 0.673098] ACPI: EC: Look up EC in DSDT [ 0.674444] ACPI: Interpreter enabled [ 0.674448] ACPI: (supports S0 S3 S4 S5) [ 0.674464] ACPI: Using IOAPIC for interrupt routing [ 0.870557] Freeing initrd memory: 12828k freed [ 1.152640] ACPI: No dock devices found. [ 1.152642] HEST: Table not found. [ 1.152645] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.152704] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.152818] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 1.152821] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 1.152823] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.152825] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 1.152827] pci_root PNP0A03:00: host bridge window [mem 0xc7f00000-0xfebfffff] [ 1.152841] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600 [ 1.152853] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 1.152889] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604 [ 1.152914] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 1.152916] pci 0000:00:02.0: PME# disabled [ 1.152947] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604 [ 1.152971] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 1.152973] pci 0000:00:04.0: PME# disabled [ 1.152991] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604 [ 1.153014] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.153016] pci 0000:00:0a.0: PME# disabled [ 1.153041] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 1.153060] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] [ 1.153069] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] [ 1.153078] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] [ 1.153088] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] [ 1.153097] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] [ 1.153107] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 1.153150] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 1.153163] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 1.153224] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 1.153237] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 1.153306] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 1.153324] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] [ 1.153392] pci 0000:00:12.2: supports D1 D2 [ 1.153394] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.153398] pci 0000:00:12.2: PME# disabled [ 1.153418] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 1.153431] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 1.153492] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 1.153505] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] [ 1.153572] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 1.153590] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] [ 1.153658] pci 0000:00:13.2: supports D1 D2 [ 1.153659] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.153663] pci 0000:00:13.2: PME# disabled [ 1.153687] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 1.153776] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 1.153792] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 1.153801] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 1.153810] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 1.153820] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 1.153829] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] [ 1.153876] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 1.153897] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 1.153953] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 1.153957] pci 0000:00:14.2: PME# disabled [ 1.153969] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 1.154043] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 1.154082] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 1.154095] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] [ 1.154159] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 1.154174] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 1.154186] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 1.154198] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 1.154212] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 1.154264] pci 0000:01:00.0: [10de:0de1] type 0 class 0x000300 [ 1.154273] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 1.154284] pci 0000:01:00.0: reg 14: [mem 0xc8000000-0xcfffffff 64bit pref] [ 1.154294] pci 0000:01:00.0: reg 1c: [mem 0xd6000000-0xd7ffffff 64bit pref] [ 1.154301] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] [ 1.154308] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 1.154350] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403 [ 1.154359] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff] [ 1.170014] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 1.170018] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 1.170021] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 1.170024] pci 0000:00:02.0: bridge window [mem 0xc8000000-0xd7ffffff 64bit pref] [ 1.170057] pci 0000:02:00.0: [1814:0781] type 0 class 0x000280 [ 1.170070] pci 0000:02:00.0: reg 10: [mem 0xfdaf0000-0xfdafffff] [ 1.170133] pci 0000:02:00.0: PME# supported from D0 D3hot [ 1.170136] pci 0000:02:00.0: PME# disabled [ 1.190010] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 1.190013] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 1.190015] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff] [ 1.190019] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.190053] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 [ 1.190065] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff] [ 1.190084] pci 0000:03:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit pref] [ 1.190097] pci 0000:03:00.0: reg 20: [mem 0xfdde0000-0xfddeffff 64bit pref] [ 1.190107] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 1.190134] pci 0000:03:00.0: supports D1 D2 [ 1.190135] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.190139] pci 0000:03:00.0: PME# disabled [ 1.210010] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 1.210013] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 1.210015] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff] [ 1.210019] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 1.210064] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00 [ 1.210087] pci 0000:04:0e.0: reg 10: [mem 0xfdcff000-0xfdcff7ff] [ 1.210099] pci 0000:04:0e.0: reg 14: [mem 0xfdcf8000-0xfdcfbfff] [ 1.210177] pci 0000:04:0e.0: supports D1 D2 [ 1.210179] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot [ 1.210184] pci 0000:04:0e.0: PME# disabled [ 1.210217] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 1.210221] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 1.210225] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 1.210229] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 1.210231] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.210234] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.210236] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.210238] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 1.210240] pci 0000:00:14.4: bridge window [mem 0xc7f00000-0xfebfffff] (subtractive decode) [ 1.210253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.210451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 1.210508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 1.210537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] [ 1.210571] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 1.210609] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.221841] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 1.221881] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 1.221919] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 1.221956] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 1.221998] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 1.222040] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 1.222073] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 1.222110] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 1.222217] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.222221] vgaarb: loaded [ 1.222361] SCSI subsystem initialized [ 1.222374] libata version 3.00 loaded. [ 1.222374] usbcore: registered new interface driver usbfs [ 1.222374] usbcore: registered new interface driver hub [ 1.222374] usbcore: registered new device driver usb [ 1.222374] wmi: Mapper loaded [ 1.222374] PCI: Using ACPI for IRQ routing [ 1.222374] PCI: pci_cache_line_size set to 64 bytes [ 1.222374] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 1.222374] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 1.222374] reserve RAM buffer: 00000000c7de0000 - 00000000c7ffffff [ 1.222374] NetLabel: Initializing [ 1.222374] NetLabel: domain hash size = 128 [ 1.222374] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.222374] NetLabel: unlabeled traffic allowed by default [ 1.222374] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 1.222374] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 1.222389] Switching to clocksource hpet [ 1.225106] Switched to NOHz mode on CPU #3 [ 1.225110] Switched to NOHz mode on CPU #0 [ 1.225115] Switched to NOHz mode on CPU #2 [ 1.225118] Switched to NOHz mode on CPU #1 [ 1.225506] AppArmor: AppArmor Filesystem Enabled [ 1.225535] pnp: PnP ACPI init [ 1.225552] ACPI: bus type pnp registered [ 1.225652] pnp 00:00: [bus 00-ff] [ 1.225654] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.225656] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.225658] pnp 00:00: [io 0x0d00-0xffff window] [ 1.225660] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.225662] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 1.225664] pnp 00:00: [mem 0xc7f00000-0xfebfffff window] [ 1.225720] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.225729] pnp 00:01: [io 0x0010-0x001f] [ 1.225731] pnp 00:01: [io 0x0022-0x003f] [ 1.225732] pnp 00:01: [io 0x0044-0x005f] [ 1.225734] pnp 00:01: [io 0x0062-0x0063] [ 1.225739] pnp 00:01: [io 0x0065-0x006f] [ 1.225740] pnp 00:01: [io 0x0074-0x007f] [ 1.225742] pnp 00:01: [io 0x0091-0x0093] [ 1.225743] pnp 00:01: [io 0x00a2-0x00bf] [ 1.225745] pnp 00:01: [io 0x00e0-0x00ef] [ 1.225747] pnp 00:01: [io 0x04d0-0x04d1] [ 1.225748] pnp 00:01: [io 0x0220-0x0225] [ 1.225750] pnp 00:01: [io 0x0290-0x0294] [ 1.225814] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 1.225817] system 00:01: [io 0x0220-0x0225] has been reserved [ 1.225819] system 00:01: [io 0x0290-0x0294] has been reserved [ 1.225822] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.226278] pnp 00:02: [io 0x4100-0x411f] [ 1.226280] pnp 00:02: [io 0x0228-0x022f] [ 1.226282] pnp 00:02: [io 0x040b] [ 1.226283] pnp 00:02: [io 0x04d6] [ 1.226285] pnp 00:02: [io 0x0c00-0x0c01] [ 1.226286] pnp 00:02: [io 0x0c14] [ 1.226288] pnp 00:02: [io 0x0c50-0x0c52] [ 1.226289] pnp 00:02: [io 0x0c6c-0x0c6d] [ 1.226291] pnp 00:02: [io 0x0c6f] [ 1.226292] pnp 00:02: [io 0x0cd0-0x0cd1] [ 1.226294] pnp 00:02: [io 0x0cd2-0x0cd3] [ 1.226296] pnp 00:02: [io 0x0cd4-0x0cdf] [ 1.226297] pnp 00:02: [io 0x4000-0x40fe] [ 1.226299] pnp 00:02: [io 0x4210-0x4217] [ 1.226300] pnp 00:02: [io 0x0b00-0x0b0f] [ 1.226302] pnp 00:02: [io 0x0b10-0x0b1f] [ 1.226304] pnp 00:02: [io 0x0b20-0x0b3f] [ 1.226305] pnp 00:02: [mem 0x00000000-0x00000fff window] [ 1.226308] pnp 00:02: [mem 0xfee00400-0xfee00fff window] [ 1.226312] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.226343] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 1.226349] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 1.226381] system 00:02: [io 0x4100-0x411f] has been reserved [ 1.226384] system 00:02: [io 0x0228-0x022f] has been reserved [ 1.226386] system 00:02: [io 0x040b] has been reserved [ 1.226388] system 00:02: [io 0x04d6] has been reserved [ 1.226390] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 1.226392] system 00:02: [io 0x0c14] has been reserved [ 1.226394] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 1.226396] system 00:02: [io 0x0c6c-0x0c6d] has been reserved [ 1.226399] system 00:02: [io 0x0c6f] has been reserved [ 1.226401] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 1.226403] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 1.226405] system 00:02: [io 0x0cd4-0x0cdf] has been reserved [ 1.226407] system 00:02: [io 0x4000-0x40fe] has been reserved [ 1.226409] system 00:02: [io 0x4210-0x4217] has been reserved [ 1.226412] system 00:02: [io 0x0b00-0x0b0f] has been reserved [ 1.226414] system 00:02: [io 0x0b10-0x0b1f] has been reserved [ 1.226416] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 1.226419] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved [ 1.226422] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.226525] pnp 00:03: [dma 4] [ 1.226527] pnp 00:03: [io 0x0000-0x000f] [ 1.226529] pnp 00:03: [io 0x0080-0x0090] [ 1.226530] pnp 00:03: [io 0x0094-0x009f] [ 1.226532] pnp 00:03: [io 0x00c0-0x00df] [ 1.226564] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.226621] pnp 00:04: [irq 0 disabled] [ 1.226635] pnp 00:04: [irq 8] [ 1.226636] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 1.226660] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.226700] pnp 00:05: [io 0x0070-0x0073] [ 1.226731] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.226738] pnp 00:06: [io 0x0061] [ 1.226764] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.226775] pnp 00:07: [io 0x00f0-0x00ff] [ 1.226786] pnp 00:07: [irq 13] [ 1.226816] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.226954] pnp 00:08: [io 0x03f0-0x03f5] [ 1.226955] pnp 00:08: [io 0x03f7] [ 1.226963] pnp 00:08: [irq 6] [ 1.226964] pnp 00:08: [dma 2] [ 1.227011] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.227182] pnp 00:09: [io 0x03f8-0x03ff] [ 1.227189] pnp 00:09: [irq 4] [ 1.227242] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.227419] pnp 00:0a: [io 0x0378-0x037f] [ 1.227431] pnp 00:0a: [irq 7] [ 1.227479] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.227599] pnp 00:0b: [mem 0xe0000000-0xefffffff] [ 1.227656] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 1.227659] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.227781] pnp 00:0c: [mem 0x000d1c00-0x000d3fff] [ 1.227788] pnp 00:0c: [mem 0x000f0000-0x000f7fff] [ 1.227789] pnp 00:0c: [mem 0x000f8000-0x000fbfff] [ 1.227793] pnp 00:0c: [mem 0x000fc000-0x000fffff] [ 1.227795] pnp 00:0c: [mem 0xc7de0000-0xc7dfffff] [ 1.227797] pnp 00:0c: [mem 0xffff0000-0xffffffff] [ 1.227798] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 1.227800] pnp 00:0c: [mem 0x00100000-0xc7ddffff] [ 1.227808] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled] [ 1.227810] pnp 00:0c: [mem 0xfec00000-0xfec00fff] [ 1.227812] pnp 00:0c: [mem 0xfee00000-0xfee00fff] [ 1.227814] pnp 00:0c: [mem 0xfff80000-0xfffeffff] [ 1.227818] pnp 00:0c: disabling [mem 0x000d1c00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.227821] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.227828] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.227831] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.227835] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.227839] pnp 00:0c: disabling [mem 0x00100000-0xc7ddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 1.227896] system 00:0c: [mem 0xc7de0000-0xc7dfffff] could not be reserved [ 1.227903] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved [ 1.227906] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.227909] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved [ 1.227912] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved [ 1.227914] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.227932] pnp: PnP ACPI: found 13 devices [ 1.227934] ACPI: ACPI bus type pnp unregistered [ 1.234118] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd007ffff pref] [ 1.234122] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 1.234124] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 1.234127] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 1.234130] pci 0000:00:02.0: bridge window [mem 0xc8000000-0xd7ffffff 64bit pref] [ 1.234133] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 1.234135] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 1.234138] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff] [ 1.234141] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.234145] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref] [ 1.234147] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 1.234149] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 1.234152] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff] [ 1.234154] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 1.234158] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 1.234161] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 1.234166] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 1.234170] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 1.234190] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.234194] pci 0000:00:02.0: setting latency timer to 64 [ 1.234204] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.234206] pci 0000:00:04.0: setting latency timer to 64 [ 1.234211] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.234213] pci 0000:00:0a.0: setting latency timer to 64 [ 1.234220] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.234222] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.234224] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.234226] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 1.234232] pci_bus 0000:00: resource 8 [mem 0xc7f00000-0xfebfffff] [ 1.234234] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 1.234236] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] [ 1.234238] pci_bus 0000:01: resource 2 [mem 0xc8000000-0xd7ffffff 64bit pref] [ 1.234240] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 1.234242] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff] [ 1.234244] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.234246] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 1.234248] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 1.234250] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] [ 1.234252] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 1.234254] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 1.234256] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref] [ 1.234258] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 1.234264] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 1.234266] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 1.234268] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff] [ 1.234270] pci_bus 0000:04: resource 8 [mem 0xc7f00000-0xfebfffff] [ 1.234301] NET: Registered protocol family 2 [ 1.234566] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.236112] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.238719] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.239037] TCP: Hash tables configured (established 524288 bind 65536) [ 1.239039] TCP reno registered [ 1.239053] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.239113] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.239239] NET: Registered protocol family 1 [ 1.370152] pci 0000:01:00.0: Boot video device [ 1.370169] PCI: CLS 4 bytes, default 64 [ 1.371646] PCI-DMA: Disabling AGP. [ 1.371759] PCI-DMA: aperture base @ bc000000 size 65536 KB [ 1.371761] PCI-DMA: using GART IOMMU. [ 1.371764] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.378387] audit: initializing netlink socket (disabled) [ 1.378404] type=2000 audit(1302908791.370:1): initialized [ 1.389509] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.391292] VFS: Disk quotas dquot_6.5.2 [ 1.391348] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.391988] fuse init (API version 7.16) [ 1.392066] msgmni has been set to 15995 [ 1.392348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.392394] io scheduler noop registered [ 1.392396] io scheduler deadline registered [ 1.392438] io scheduler cfq registered (default) [ 1.392574] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.392602] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.392701] pcieport 0000:00:04.0: setting latency timer to 64 [ 1.392720] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X [ 1.392803] pcieport 0000:00:0a.0: setting latency timer to 64 [ 1.392823] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X [ 1.392891] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.392911] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.393018] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.393023] ACPI: Power Button [PWRB] [ 1.393063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.393065] ACPI: Power Button [PWRF] [ 1.393211] ACPI: acpi_idle registered with cpuidle [ 1.393226] ACPI: processor limited to max C-state 1 [ 1.680944] ERST: Table is not found! [ 1.681018] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.701636] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.160854] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.170332] Linux agpgart interface v0.103 [ 2.171376] brd: module loaded [ 2.171863] loop: module loaded [ 2.171936] i2c-core: driver [adp5520] using legacy suspend method [ 2.171937] i2c-core: driver [adp5520] using legacy resume method [ 2.172094] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.172435] Fixed MDIO Bus: probed [ 2.172459] PPP generic driver version 2.4.2 [ 2.172510] tun: Universal TUN/TAP device driver, 1.6 [ 2.172511] tun: (C) 1999-2004 Max Krasnyansky [ 2.172586] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.172650] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.172675] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 2.172719] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.220150] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.220174] ehci_hcd 0000:00:12.2: debug port 1 [ 2.220201] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 2.240124] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.240221] hub 1-0:1.0: USB hub found [ 2.240225] hub 1-0:1.0: 6 ports detected [ 2.240371] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.240381] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.240414] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.270153] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.270172] ehci_hcd 0000:00:13.2: debug port 1 [ 2.270195] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 2.290138] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.290220] hub 2-0:1.0: USB hub found [ 2.290223] hub 2-0:1.0: 6 ports detected [ 2.290316] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.290368] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.290379] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.290410] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 2.290459] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 2.354216] hub 3-0:1.0: USB hub found [ 2.354225] hub 3-0:1.0: 3 ports detected [ 2.354342] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.354351] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 2.354383] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.354415] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 2.370126] Refined TSC clocksource calibration: 2611.800 MHz. [ 2.370129] Switching to clocksource tsc [ 2.414209] hub 4-0:1.0: USB hub found [ 2.414222] hub 4-0:1.0: 3 ports detected [ 2.414321] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.414332] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.414364] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.414416] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 2.474202] hub 5-0:1.0: USB hub found [ 2.474214] hub 5-0:1.0: 3 ports detected [ 2.474314] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.474324] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.474358] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.474398] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 2.534216] hub 6-0:1.0: USB hub found [ 2.534228] hub 6-0:1.0: 3 ports detected [ 2.534328] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.534339] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.534372] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.534410] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 2.560110] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 2.594217] hub 7-0:1.0: USB hub found [ 2.594230] hub 7-0:1.0: 2 ports detected [ 2.594303] uhci_hcd: USB Universal Host Controller Interface driver [ 2.594386] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.595003] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.595009] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.595179] mousedev: PS/2 mouse device common for all mice [ 2.595277] rtc_cmos 00:05: RTC can wake from S4 [ 2.630177] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.630208] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.630299] device-mapper: uevent: version 1.0.3 [ 2.630363] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 2.630415] device-mapper: multipath: version 1.2.0 loaded [ 2.630418] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.630522] cpuidle: using governor ladder [ 2.630524] cpuidle: using governor menu [ 2.630755] TCP cubic registered [ 2.630868] NET: Registered protocol family 10 [ 2.631296] NET: Registered protocol family 17 [ 2.631309] Registering the dns_resolver key type [ 2.631333] powernow-k8: Found 1 AMD Phenom(tm) 9950 Quad-Core Processor (4 cpu cores) (version 2.20.00) [ 2.631361] powernow-k8: 0 : pstate 0 (2600 MHz) [ 2.631362] powernow-k8: 1 : pstate 1 (1300 MHz) [ 2.631654] PM: Hibernation image not present or could not be loaded. [ 2.631663] registered taskstats version 1 [ 2.631902] Magic number: 7:619:150 [ 2.631913] bdi 1:2: hash matches [ 2.631936] pci 0000:00:14.3: hash matches [ 2.631981] rtc_cmos 00:05: setting system clock to 2011-04-15 23:06:33 UTC (1302908793) [ 2.631984] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.631985] EDD information not available. [ 2.633430] Freeing unused kernel memory: 956k freed [ 2.633681] Write protecting the kernel read-only data: 10240k [ 2.634350] Freeing unused kernel memory: 184k freed [ 2.638623] Freeing unused kernel memory: 1444k freed [ 2.655609] <30>udev[108]: starting version 167 [ 2.702280] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.702304] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.702346] r8169 0000:03:00.0: setting latency timer to 64 [ 2.702390] r8169 0000:03:00.0: irq 43 for MSI/MSI-X [ 2.702765] r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xffffc900117a2000, 00:24:1d:8b:0e:b8, XID 1c4000c0 IRQ 43 [ 2.704707] Floppy drive(s): fd0 is 1.44M [ 2.710077] ahci 0000:00:11.0: version 3.0 [ 2.710108] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.710255] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.710262] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.711212] scsi0 : ahci [ 2.711322] scsi1 : ahci [ 2.711391] scsi2 : ahci [ 2.711452] scsi3 : ahci [ 2.711510] scsi4 : ahci [ 2.711577] scsi5 : ahci [ 2.711692] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 2.711695] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 2.711698] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 2.711701] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 2.711704] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 2.711707] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 2.712419] hub 1-5:1.0: USB hub found [ 2.712659] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.712687] hub 1-5:1.0: 4 ports detected [ 2.712714] scsi6 : pata_atiixp [ 2.712781] scsi7 : pata_atiixp [ 2.713262] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 2.713264] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 2.724074] FDC 0 is a post-1991 82077 [ 2.770189] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 2.830111] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 2.892017] ata7.00: ATA-6: WDC WD2000JB-00GVA0, 08.02D08, max UDMA/100 [ 2.892020] ata7.00: 390721968 sectors, multi 16: LBA48 [ 2.931944] ata7.00: configured for UDMA/100 [ 3.050163] ata6: SATA link down (SStatus 0 SControl 300) [ 3.120117] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 3.260134] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.260158] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.260180] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.260840] ata2.00: ATA-8: KINGSTON SNV425S264GB, C091126a, max UDMA/100 [ 3.260843] ata2.00: 125045424 sectors, multi 16: LBA48 [ 3.261702] ata2.00: configured for UDMA/100 [ 3.262927] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100 [ 3.266884] ata4.00: configured for UDMA/100 [ 3.270122] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.270144] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.270208] firewire_core: created device fw0: GUID 0049e10f0000241d, S400 [ 3.273154] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL02, max UDMA/100 [ 3.276053] usbcore: registered new interface driver uas [ 3.277097] ata3.00: configured for UDMA/100 [ 3.278268] ata5.00: ATAPI: HL-DT-ST BD-RE WH10LS30, 1.00, max UDMA/133 [ 3.282220] ata5.00: configured for UDMA/133 [ 3.284454] ata1.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133 [ 3.284456] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.285684] ata1.00: configured for UDMA/133 [ 3.285806] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 3.285953] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.285993] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.286070] sd 0:0:0:0: [sda] Write Protect is off [ 3.286072] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.286088] scsi 1:0:0:0: Direct-Access ATA KINGSTON SNV425S C091 PQ: 0 ANSI: 5 [ 3.286130] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.286218] sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 3.286261] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.286272] sd 1:0:0:0: [sdb] Write Protect is off [ 3.286275] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.286294] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.287023] sdb: sdb1 [ 3.287242] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.288965] sda: sda1 sda2 sda3 [ 3.289208] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.289818] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL02 PQ: 0 ANSI: 5 [ 3.298333] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.298336] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.298424] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 3.298484] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 3.384705] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5 [ 3.390112] usb 2-2: new high speed USB device using ehci_hcd and address 3 [ 3.497415] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.497512] sr 3:0:0:0: Attached scsi CD-ROM sr1 [ 3.497563] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 3.506361] scsi 4:0:0:0: CD-ROM HL-DT-ST BD-RE WH10LS30 1.00 PQ: 0 ANSI: 5 [ 3.521202] sr2: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.521287] sr 4:0:0:0: Attached scsi CD-ROM sr2 [ 3.521340] sr 4:0:0:0: Attached scsi generic sg4 type 5 [ 3.521448] scsi 6:0:0:0: Direct-Access ATA WDC WD2000JB-00G 08.0 PQ: 0 ANSI: 5 [ 3.521564] sd 6:0:0:0: [sdc] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 3.521573] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 3.521638] sd 6:0:0:0: [sdc] Write Protect is off [ 3.521641] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.521674] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.553482] sdc: sdc1 sdc2 [ 3.553750] sd 6:0:0:0: [sdc] Attached SCSI disk [ 3.562885] Initializing USB Mass Storage driver... [ 3.563729] scsi8 : usb-storage 2-1:1.0 [ 3.563840] usbcore: registered new interface driver usb-storage [ 3.563842] USB Mass Storage support registered. [ 3.660136] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 3.815121] scsi9 : usb-storage 2-4:1.0 [ 3.900726] usb 1-5.1: new high speed USB device using ehci_hcd and address 4 [ 4.022635] hub 1-5.1:1.0: USB hub found [ 4.022987] hub 1-5.1:1.0: 4 ports detected [ 4.110691] usb 1-5.2: new full speed USB device using ehci_hcd and address 5 [ 4.300201] input: USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.0/input/input2 [ 4.300299] generic-usb 0003:099A:2515.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Receiver] on usb-0000:00:12.2-5.2/input0 [ 4.301059] usb 1-5.1.2: new low speed USB device using ehci_hcd and address 6 [ 4.303607] input: USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.1/input/input3 [ 4.303739] generic-usb 0003:099A:2515.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [ USB Receiver] on usb-0000:00:12.2-5.2/input1 [ 4.303754] usbcore: registered new interface driver usbhid [ 4.303756] usbhid: USB HID core driver [ 4.490196] input: Unicomp Endura Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.1/1-5.1.2/1-5.1.2:1.0/input/input4 [ 4.490297] generic-usb 0003:F617:0905.0003: input,hidraw2: USB HID v1.10 Keyboard [Unicomp Endura Keyboard ] on usb-0000:00:12.2-5.1.2/input0 [ 4.561058] scsi 8:0:0:0: Direct-Access Kingston SNA-DC/U 1.08 PQ: 0 ANSI: 4 [ 4.561482] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 4.563065] sd 8:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 4.563956] sd 8:0:0:0: [sdd] Write Protect is off [ 4.563959] sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00 [ 4.565285] sd 8:0:0:0: [sdd] No Caching mode page present [ 4.565287] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 4.568456] sd 8:0:0:0: [sdd] No Caching mode page present [ 4.568458] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 4.569107] sdd: sdd1 [ 4.570336] usb 1-5.1.4: new low speed USB device using ehci_hcd and address 7 [ 4.571081] sd 8:0:0:0: [sdd] No Caching mode page present [ 4.571084] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 4.571086] sd 8:0:0:0: [sdd] Attached SCSI disk [ 4.692464] input: Primax Kensington Eagle Trackball as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.0/input/input5 [ 4.692580] generic-usb 0003:047D:2048.0004: input,hidraw3: USB HID v1.11 Mouse [Primax Kensington Eagle Trackball] on usb-0000:00:12.2-5.1.4/input0 [ 4.811490] scsi 9:0:0:0: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0 [ 4.812340] scsi 9:0:0:1: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0 [ 4.813105] scsi 9:0:0:2: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0 [ 4.813855] scsi 9:0:0:3: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0 [ 4.814260] sd 9:0:0:0: Attached scsi generic sg7 type 0 [ 4.814428] sd 9:0:0:1: Attached scsi generic sg8 type 0 [ 4.814661] sd 9:0:0:2: Attached scsi generic sg9 type 0 [ 4.814793] sd 9:0:0:3: Attached scsi generic sg10 type 0 [ 4.819461] sd 9:0:0:0: [sde] Attached SCSI removable disk [ 4.820695] sd 9:0:0:2: [sdg] Attached SCSI removable disk [ 4.821320] sd 9:0:0:1: [sdf] Attached SCSI removable disk [ 4.821940] sd 9:0:0:3: [sdh] Attached SCSI removable disk [ 9.777857] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 10.294857] <30>udev[485]: starting version 167 [ 10.389821] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f] [ 10.389824] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.390872] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned. [ 10.394796] rt2860 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.394834] rt2860 0000:02:00.0: setting latency timer to 64 [ 10.395006] === pAd = ffffc900128fc000, size = 525944 === [ 10.395008] <-- RTMPAllocAdapterBlock, Status=0 [ 10.395009] pAd->CSRBaseAddress =0xffffc900117c0000, csr_addr=0xffffc900117c0000! [ 10.419547] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 10.419635] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 10.428101] lp: driver loaded but no devices found [ 10.435297] Adding 14436348k swap on /dev/sdc2. Priority:0 extents:1 across:14436348k [ 10.440257] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled [ 10.443254] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 10.447540] it87: Found IT8718F chip at 0x228, revision 5 [ 10.447562] it87: Beeping is supported [ 10.456596] parport_pc 00:0a: reported by Plug and Play ACPI [ 10.456654] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 10.497962] ppdev: user-space parallel port driver [ 10.528530] MCE: In-kernel MCE decoding enabled. [ 10.543253] lp0: using parport0 (interrupt-driven). [ 10.598932] nvidia: module license 'NVIDIA' taints kernel. [ 10.598936] Disabling lock debugging due to kernel taint [ 10.633348] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 10.992431] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.992440] nvidia 0000:01:00.0: setting latency timer to 64 [ 10.992445] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 10.992639] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.03 Sat Apr 9 00:06:19 PDT 2011 [ 11.016438] EDAC MC: Ver: 2.1.0 Apr 11 2011 [ 11.047846] EDAC amd64_edac: v3.3.0 [ 11.047920] EDAC amd64: DRAM ECC disabled. [ 11.047932] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 11.047933] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 11.047934] (Note that use of the override may cause unknown side effects.) [ 11.072268] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.105287] type=1400 audit(1302919601.959:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=653 comm="apparmor_parser" [ 11.105304] type=1400 audit(1302919601.959:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=738 comm="apparmor_parser" [ 11.105321] type=1400 audit(1302919601.959:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=851 comm="apparmor_parser" [ 11.105586] type=1400 audit(1302919601.959:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=653 comm="apparmor_parser" [ 11.105610] type=1400 audit(1302919601.959:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=738 comm="apparmor_parser" [ 11.105629] type=1400 audit(1302919601.959:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=851 comm="apparmor_parser" [ 11.105781] type=1400 audit(1302919601.959:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=653 comm="apparmor_parser" [ 11.105809] type=1400 audit(1302919601.959:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=738 comm="apparmor_parser" [ 11.105830] type=1400 audit(1302919601.959:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=851 comm="apparmor_parser" [ 11.335067] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 11.335072] hda_intel: Disable MSI for Nvidia chipset [ 11.335114] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 11.609595] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4712 [ 11.609653] usbcore: registered new interface driver usblp [ 11.781062] type=1400 audit(1302919602.639:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1263 comm="apparmor_parser" [ 12.019387] RX DESC ffff8800c7427000 size = 2048 [ 12.019656] <-- RTMPAllocTxRxRingMemory, Status=0 [ 12.021645] 1. Phy Mode = 0 [ 12.021647] 2. Phy Mode = 0 [ 12.035164] RTMPSetPhyMode: channel is out of range, use first channel=1 [ 12.038542] 3. Phy Mode = 0 [ 12.041245] MCS Set = 00 00 00 00 00 [ 12.042802] <==== rt28xx_init, Status=0 [ 12.042863] 0x1300 = 00073200 [ 12.090560] RX DESC ffff8800c7462000 size = 2048 [ 12.090795] <-- RTMPAllocTxRxRingMemory, Status=0 [ 12.092823] 1. Phy Mode = 0 [ 12.092824] 2. Phy Mode = 0 [ 12.110189] 3. Phy Mode = 0 [ 12.112090] MCS Set = 00 00 00 00 00 [ 12.113681] <==== rt28xx_init, Status=0 [ 12.113745] 0x1300 = 00073200 [ 12.121135] r8169 0000:03:00.0: eth0: link down [ 12.121957] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.772970] vesafb: framebuffer at 0xd7000000, mapped to 0xffffc90014a00000, using 1216k, total 1216k [ 13.772975] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 13.772977] vesafb: scrolling: redraw [ 13.772979] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 13.773126] Console: switching to colour frame buffer device 80x30 [ 13.773137] fb0: VESA VGA frame buffer device [ 14.485047] ioremap error for 0xc7de3000-0xc7de4000, requested 0x10, got 0x0 [ 15.344474] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0 [ 15.363215] HDMI hot plug event: Pin=5 Presence_Detect=0 ELD_Valid=1 [ 16.013491] usb 1-6: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 17.360044] HDMI: detected monitor ASUS VH242H [ 17.360047] at connection type HDMI [ 17.360050] HDMI: available speakers: FL/FR [ 17.360054] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 [ 18.006145] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1631 [ 20.088075] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 20.090534] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=0 [ 20.881988] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 22.570111] wlan0: no IPv6 routers present [ 38.011332] ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1234 [ 50.065122] NVRM: Xid (0000:01:00): 13, 0001 00000000 00009197 00000ff8 fffe0000 00000004 [ 52.180104] ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1149 [ 52.180403] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) [ 71.905047] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 1528 [ 108.010145] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1669 [ 168.010282] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1292 [ 248.012809] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 1526 [ 348.010238] ===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 1994 [ 468.010205] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1806 [ 588.010022] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 2617 [ 708.010231] ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 2220 [ 828.010222] ===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 2108 [ 948.010309] ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 2123 [ 1068.009733] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 1486 [ 1188.009809] ===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 1947 [ 1269.443799] exe (3300): /proc/3300/oom_adj is deprecated, please use /proc/3300/oom_score_adj instead. [ 1308.009910] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 1516 [ 1428.009889] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1627 [ 1548.009250] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1618 [ 1668.009988] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2398 [ 1788.009561] ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 2254 [ 1828.660130] CE: hpet increased min_delta_ns to 20113 nsec [ 1908.009684] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 2494 [ 2028.009280] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1673 [ 2148.009259] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 2511 [ 2268.009592] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 1486 [ 2388.009521] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2366 [ 2508.014611] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 1492 [ 2628.010143] ===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 2770 [ 2748.010235] ===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 2041 [ 2868.010234] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 2503 [ 2937.333431] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [ 2988.010157] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1892 [ 3108.010327] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 1095 [ 3228.010249] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1790 [ 3348.014242] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1775 [ 3468.010099] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1936 [ 3588.015385] ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1234 [ 3708.012692] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1670 [ 3828.010307] ===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 2024 [ 3948.010174] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1929 [ 4068.010182] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1379 [ 4188.010131] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 2574 [ 4308.010106] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 1559 [ 4428.010140] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1923 [ 4548.010177] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 1526 [ 4668.010276] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1426 [ 4708.697431] RX DESC ffff8800c7462000 size = 2048 [ 4708.697804] <-- RTMPAllocTxRxRingMemory, Status=0 [ 4708.699896] 1. Phy Mode = 0 [ 4708.699899] 2. Phy Mode = 0 [ 4708.717776] 3. Phy Mode = 0 [ 4708.719685] MCS Set = 00 00 00 00 00 [ 4708.721270] <==== rt28xx_init, Status=0 [ 4708.721333] 0x1300 = 000a4200 [ 4709.775766] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 4709.916565] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=0 [ 4711.751927] PM: Syncing filesystems ... done. [ 4711.768560] PM: Preparing system for mem sleep [ 4711.768574] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 4711.780212] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 4711.800127] PM: Entering mem sleep [ 4711.800145] Suspending console(s) (use no_console_suspend to debug) [ 4711.800863] sd 6:0:0:0: [sdc] Synchronizing SCSI cache [ 4711.800977] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 4711.801013] parport_pc 00:0a: disabled [ 4711.801017] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4711.801063] serial 00:09: disabled [ 4711.801205] sd 0:0:0:0: [sda] Stopping disk [ 4711.801377] ACPI handle has no context! [ 4711.801408] ACPI handle has no context! [ 4711.801449] rt2860 0000:02:00.0: PCI INT A disabled [ 4711.801453] ACPI handle has no context! [ 4711.802420] sd 6:0:0:0: [sdc] Stopping disk [ 4711.803798] sd 1:0:0:0: [sdb] Stopping disk [ 4711.810218] ohci_hcd 0000:00:14.5: PCI INT C disabled [ 4711.810385] ohci_hcd 0000:00:13.1: PCI INT A disabled [ 4711.810414] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 4711.810431] ohci_hcd 0000:00:12.1: PCI INT A disabled [ 4711.810443] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 4711.840158] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 4711.880158] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 4711.920217] HDA Intel 0000:00:14.2: PCI INT A disabled [ 4711.940151] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 129.921 msecs [ 4712.055354] PM: suspend of drv:sd dev:6:0:0:0 complete after 254.495 msecs [ 4712.055364] PM: suspend of drv:scsi dev:target6:0:0 complete after 254.467 msecs [ 4712.055374] PM: suspend of drv:scsi dev:host6 complete after 254.236 msecs [ 4712.070215] PM: suspend of drv:pata_atiixp dev:0000:00:14.1 complete after 259.928 msecs [ 4712.320162] HDA Intel 0000:01:00.1: PCI INT B disabled [ 4712.320190] ACPI handle has no context! [ 4712.340356] PM: suspend of drv:HDA Intel dev:0000:01:00.1 complete after 538.970 msecs [ 4712.340367] PM: suspend of drv:pcieport dev:0000:00:02.0 complete after 522.947 msecs [ 4712.345497] PM: suspend of drv:sd dev:0:0:0:0 complete after 544.489 msecs [ 4712.345506] PM: suspend of drv:scsi dev:target0:0:0 complete after 544.467 msecs [ 4712.345517] PM: suspend of drv:scsi dev:host0 complete after 544.285 msecs [ 4712.360279] ahci 0000:00:11.0: PCI INT A disabled [ 4712.380149] PM: suspend of drv:ahci dev:0000:00:11.0 complete after 569.700 msecs [ 4712.380159] PM: suspend of drv: dev:pci0000:00 complete after 562.670 msecs [ 4712.380167] PM: suspend of devices complete after 579.662 msecs [ 4712.380169] PM: suspend devices took 0.580 seconds [ 4712.380416] r8169 0000:03:00.0: PME# enabled [ 4712.380425] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI [ 4712.440237] PM: late suspend of devices complete after 60.065 msecs [ 4712.440470] ACPI: Preparing to enter system sleep state S3 [ 4712.440621] PM: Saving platform NVS memory [ 4712.440641] Disabling non-boot CPUs ... [ 4712.550155] CPU 1 is now offline [ 5012.526597] Clocksource tsc unstable (delta = 7908423607 ns) [ 5012.527156] Switching to clocksource hpet [ 5012.630142] CPU 2 is now offline [ 5012.750153] CPU 3 is now offline [ 5012.750438] Back to C! [ 5012.750438] PM: Restoring platform NVS memory [ 5012.750438] PCI-DMA: Resuming GART IOMMU [ 5012.750438] PCI-DMA: Restoring GART aperture settings [ 5012.750438] Enabling non-boot CPUs ... [ 5012.750438] Booting Node 0 Processor 1 APIC 0x1 [ 4712.442156] Switch to broadcast mode on CPU1 [ 5012.940123] Switched to NOHz mode on CPU #1 [ 5012.960674] CPU1 is up [ 5012.960807] Booting Node 0 Processor 2 APIC 0x2 [ 5012.529541] Switch to broadcast mode on CPU2 [ 5013.140502] CPU2 is up [ 5013.140632] Booting Node 0 Processor 3 APIC 0x3 [ 5013.150025] Switched to NOHz mode on CPU #2 [ 5012.641420] Switch to broadcast mode on CPU3 [ 5013.330141] Switched to NOHz mode on CPU #3 [ 5013.420520] CPU3 is up [ 5013.421393] ACPI: Waking up from system sleep state S3 [ 5013.421629] pci 0000:00:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000004) [ 5013.421633] pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x2000) [ 5013.421653] pcieport 0000:00:02.0: restoring config space at offset 0x7 (was 0x2000e1e1, writing 0xe1e1) [ 5013.421657] pcieport 0000:00:02.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 5013.421683] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 5013.421706] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 5013.421729] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5013.440125] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfe02c000-0xfe02c0ff] (PCI address [0xfe02c000-0xfe02c0ff]) [ 5013.440151] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00012) [ 5013.460143] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfe029000-0xfe0290ff] (PCI address [0xfe029000-0xfe0290ff]) [ 5013.460169] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00012) [ 5013.460246] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x100, writing 0x5) [ 5013.460262] HDA Intel 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2001) [ 5013.460382] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 5013.460389] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xef01) [ 5013.460393] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0xc, writing 0xd600000c) [ 5013.460397] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xc800000c) [ 5013.460401] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfb000000) [ 5013.460406] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5013.460439] HDA Intel 0000:01:00.1: restoring config space at offset 0xf (was 0x200, writing 0x203) [ 5013.460450] HDA Intel 0000:01:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xfcffc000) [ 5013.460454] HDA Intel 0000:01:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800001) [ 5013.460458] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [ 5013.460504] rt2860 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105) [ 5013.460517] rt2860 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfdaf0000) [ 5013.460521] rt2860 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x1) [ 5013.460526] rt2860 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 5013.460577] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 5013.461374] PM: early resume of devices complete after 39.850 msecs [ 5013.461501] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5013.461565] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5013.461616] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5013.461767] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5013.461841] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5013.461885] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5013.461933] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5013.462010] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5013.462045] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5013.462415] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5013.462427] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5013.462483] rt2860 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5013.462575] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI [ 5013.462582] r8169 0000:03:00.0: PME# disabled [ 5013.462929] serial 00:09: activated [ 5013.463219] parport_pc 00:0a: activated [ 5013.468058] sd 0:0:0:0: [sda] Starting disk [ 5013.468148] sd 1:0:0:0: [sdb] Starting disk [ 5013.468289] sd 6:0:0:0: [sdc] Starting disk [ 5013.520235] firewire_core: skipped bus generations, destroying all nodes [ 5013.590153] PM: resume of drv:usb dev:2-1 complete after 122.327 msecs [ 5013.590170] PM: resume of drv: dev:ep_00 complete after 122.167 msecs [ 5013.590177] PM: resume of drv:usb-storage dev:2-1:1.0 complete after 122.303 msecs [ 5013.590188] PM: resume of drv: dev:ep_81 complete after 122.274 msecs [ 5013.590197] PM: resume of drv: dev:ep_02 complete after 122.239 msecs [ 5013.590200] PM: resume of drv:scsi dev:host8 complete after 121.770 msecs [ 5013.590218] PM: resume of drv:scsi_host dev:host8 complete after 121.743 msecs [ 5013.590221] PM: resume of drv:scsi dev:target8:0:0 complete after 120.736 msecs [ 5013.590240] PM: resume of drv:sd dev:8:0:0:0 complete after 120.713 msecs [ 5013.590254] PM: resume of drv:scsi_device dev:8:0:0:0 complete after 120.681 msecs [ 5013.590274] PM: resume of drv:usb dev:2-2 complete after 121.937 msecs [ 5013.590279] PM: resume of drv:usb dev:2-4 complete after 121.758 msecs [ 5013.590290] PM: resume of drv: dev:ep_00 complete after 121.906 msecs [ 5013.590301] PM: resume of drv: dev:ep_00 complete after 121.507 msecs [ 5013.590310] PM: resume of drv:usb dev:2-2:4.2 complete after 119.755 msecs [ 5013.590313] PM: resume of drv:usb dev:2-2:4.0 complete after 120.072 msecs [ 5013.590322] PM: resume of drv:usb-storage dev:2-4:1.0 complete after 121.756 msecs [ 5013.590329] PM: resume of drv:usbfs dev:2-2:4.1 complete after 119.909 msecs [ 5013.590332] PM: resume of drv: dev:ep_81 complete after 120.002 msecs [ 5013.590337] PM: resume of drv: dev:ep_02 complete after 120.052 msecs [ 5013.590340] PM: resume of drv: dev:ep_83 complete after 119.966 msecs [ 5013.590342] PM: resume of drv: dev:ep_04 complete after 119.877 msecs [ 5013.590345] PM: resume of drv: dev:ep_85 complete after 119.834 msecs [ 5013.590347] PM: resume of drv:scsi dev:host9 complete after 121.735 msecs [ 5013.590358] PM: resume of drv: dev:ep_02 complete after 121.609 msecs [ 5013.590369] PM: resume of drv: dev:ep_81 complete after 121.666 msecs [ 5013.590376] PM: resume of drv:scsi_host dev:host9 complete after 121.718 msecs [ 5013.590381] PM: resume of drv:scsi dev:target9:0:0 complete after 120.584 msecs [ 5013.590401] PM: resume of drv:usb dev:1-6 complete after 123.135 msecs [ 5013.590403] PM: resume of drv:sd dev:9:0:0:2 complete after 120.347 msecs [ 5013.590406] PM: resume of drv:sd dev:9:0:0:0 complete after 120.561 msecs [ 5013.590417] PM: resume of drv:sd dev:9:0:0:3 complete after 120.264 msecs [ 5013.590419] PM: resume of drv:sd dev:9:0:0:1 complete after 120.482 msecs [ 5013.590421] PM: resume of drv:usb dev:1-6:1.0 complete after 123.107 msecs [ 5013.590426] PM: resume of drv:usblp dev:1-6:1.1 complete after 122.927 msecs [ 5013.590429] PM: resume of drv:scsi_device dev:9:0:0:0 complete after 120.537 msecs [ 5013.590432] PM: resume of drv:usb dev:1-6:1.2 complete after 122.796 msecs [ 5013.590435] PM: resume of drv:scsi_device dev:9:0:0:1 complete after 120.452 msecs [ 5013.590437] PM: resume of drv:scsi_device dev:9:0:0:2 complete after 120.330 msecs [ 5013.590442] PM: resume of drv: dev:ep_01 complete after 123.081 msecs [ 5013.590446] PM: resume of drv: dev:ep_82 complete after 123.040 msecs [ 5013.590451] PM: resume of drv: dev:ep_89 complete after 122.861 msecs [ 5013.590454] PM: resume of drv: dev:ep_06 complete after 122.769 msecs [ 5013.590456] PM: resume of drv: dev:ep_00 complete after 122.679 msecs [ 5013.590459] PM: resume of drv: dev:ep_87 complete after 122.732 msecs [ 5013.590466] PM: resume of drv: dev:ep_08 complete after 122.921 msecs [ 5013.590468] PM: resume of drv:scsi_device dev:9:0:0:3 complete after 120.271 msecs [ 5013.590474] PM: resume of drv: dev:ep_83 complete after 123.022 msecs [ 5013.591624] PM: resume of drv:usb dev:1-5 complete after 124.529 msecs [ 5013.591637] PM: resume of drv:hub dev:1-5:1.0 complete after 124.517 msecs [ 5013.591645] PM: resume of drv: dev:ep_00 complete after 124.424 msecs [ 5013.591649] PM: resume of drv: dev:ep_81 complete after 124.456 msecs [ 5013.600049] PM: resume of drv:usb dev:usb7 complete after 133.185 msecs [ 5013.600054] PM: resume of drv:usb dev:usb5 complete after 133.558 msecs [ 5013.600056] PM: resume of drv:usb dev:usb6 complete after 133.375 msecs [ 5013.600058] PM: resume of drv:hub dev:7-0:1.0 complete after 133.147 msecs [ 5013.600065] PM: resume of drv:hub dev:5-0:1.0 complete after 133.524 msecs [ 5013.600068] PM: resume of drv:hub dev:6-0:1.0 complete after 133.342 msecs [ 5013.600070] PM: resume of drv: dev:ep_00 complete after 133.069 msecs [ 5013.600072] PM: resume of drv: dev:ep_81 complete after 133.485 msecs [ 5013.600076] PM: resume of drv: dev:ep_00 complete after 133.258 msecs [ 5013.600078] PM: resume of drv: dev:ep_00 complete after 133.445 msecs [ 5013.600081] PM: resume of drv: dev:ep_81 complete after 133.310 msecs [ 5013.600093] PM: resume of drv: dev:ep_81 complete after 133.138 msecs [ 5013.600096] PM: resume of drv:usb dev:usb3 complete after 133.950 msecs [ 5013.600102] PM: resume of drv:usb dev:usb4 complete after 133.787 msecs [ 5013.600110] PM: resume of drv: dev:ep_00 complete after 133.841 msecs [ 5013.600113] PM: resume of drv:hub dev:3-0:1.0 complete after 133.929 msecs [ 5013.600117] PM: resume of drv:hub dev:4-0:1.0 complete after 133.756 msecs [ 5013.600120] PM: resume of drv: dev:ep_81 complete after 133.897 msecs [ 5013.600126] PM: resume of drv: dev:ep_00 complete after 133.675 msecs [ 5013.600128] PM: resume of drv: dev:ep_81 complete after 133.721 msecs [ 5013.648716] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 186.445 msecs [ 5013.651724] PM: resume of drv:usb dev:1-5.2 complete after 182.699 msecs [ 5013.651736] PM: resume of drv:usbhid dev:1-5.2:1.0 complete after 182.666 msecs [ 5013.651748] PM: resume of drv: dev:ep_81 complete after 182.634 msecs [ 5013.651769] PM: resume of drv: dev:ep_00 complete after 182.516 msecs [ 5013.651771] PM: resume of drv:usbhid dev:1-5.2:1.1 complete after 182.610 msecs [ 5013.651781] PM: resume of drv: dev:ep_82 complete after 182.574 msecs [ 5013.652835] PM: resume of drv:usb dev:1-5.1 complete after 183.995 msecs [ 5013.652848] PM: resume of drv:hub dev:1-5.1:1.0 complete after 183.962 msecs [ 5013.652867] PM: resume of drv: dev:ep_00 complete after 183.890 msecs [ 5013.652876] PM: resume of drv: dev:ep_81 complete after 183.945 msecs [ 5013.711707] PM: resume of drv:usb dev:1-5.1.2 complete after 242.409 msecs [ 5013.711725] PM: resume of drv: dev:ep_00 complete after 242.288 msecs [ 5013.711728] PM: resume of drv:usbhid dev:1-5.1.2:1.0 complete after 242.382 msecs [ 5013.711739] PM: resume of drv: dev:ep_81 complete after 242.351 msecs [ 5013.810188] ata6: SATA link down (SStatus 0 SControl 300) [ 5013.990432] usb 1-5.1.4: reset low speed USB device using ehci_hcd and address 7 [ 5014.000146] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5014.006968] ata5.00: configured for UDMA/133 [ 5014.010148] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5014.016366] ata3.00: configured for UDMA/100 [ 5014.030131] firewire_core: rediscovered device fw0 [ 5014.060153] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5014.066800] ata4.00: configured for UDMA/100 [ 5014.305031] PM: resume of drv:usb dev:1-5.1.4 complete after 835.412 msecs [ 5014.305049] PM: resume of drv: dev:ep_00 complete after 835.295 msecs [ 5014.305051] PM: resume of drv:usbhid dev:1-5.1.4:1.0 complete after 835.387 msecs [ 5014.305063] PM: resume of drv: dev:ep_81 complete after 835.354 msecs [ 5015.150154] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5015.151518] ata2.00: configured for UDMA/100 [ 5015.170404] PM: resume of drv:sd dev:1:0:0:0 complete after 1702.256 msecs [ 5015.170416] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 1702.226 msecs [ 5016.500131] [ 5016.500132] floppy driver state [ 5016.500133] ------------------- [ 5016.500146] now=4295438946 last interrupt=4295138014 diff=300932 last called handler=recal_interrupt [ 5016.500147] timeout_message=lock fdc [ 5016.500148] last output bytes: [ 5016.500150] 18 80 4294937568 [ 5016.500151] 8 80 4294937568 [ 5016.500152] 8 80 4294937568 [ 5016.500153] 8 80 4294937568 [ 5016.500154] 8 80 4294937568 [ 5016.500155] 12 80 4295137948 [ 5016.500156] 0 90 4295137948 [ 5016.500157] 13 90 4295137948 [ 5016.500158] 0 90 4295137948 [ 5016.500159] 1a 90 4295137948 [ 5016.500159] 0 90 4295137948 [ 5016.500160] 3 90 4295137948 [ 5016.500161] c1 90 4295137948 [ 5016.500162] 10 90 4295137948 [ 5016.500163] 7 80 4295137948 [ 5016.500164] 0 90 4295137948 [ 5016.500165] 8 81 4295137980 [ 5016.500166] 7 80 4295137982 [ 5016.500167] 0 90 4295137982 [ 5016.500168] 8 81 4295138014 [ 5016.500169] last result at 4295138014 [ 5016.500169] last redo_fd_request at 4295138014 [ 5016.500172] 70 00 p. [ 5016.500179] status=0 [ 5016.500180] fdc_busy=1 [ 5016.500183] do_floppy=reset_interrupt [ 5016.500184] cont=ffffffffa0046b80 [ 5016.500185] current_req= (null) [ 5016.500186] command_status=-1 [ 5016.500187] [ 5016.500190] floppy0: floppy timeout called [ 5016.500202] PM: resume of drv:floppy dev:floppy.0 complete after 3009.698 msecs [ 5018.500121] ata7: link is slow to respond, please be patient (ready=0) [ 5020.180575] ata7.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 5020.180579] ata7.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 5020.221889] ata7.00: configured for UDMA/100 [ 5020.226980] PM: resume of drv:sd dev:6:0:0:0 complete after 6758.691 msecs [ 5020.226994] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 6758.702 msecs [ 5021.840151] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5021.861605] ata1.00: configured for UDMA/133 [ 5021.889763] PM: resume of drv:sd dev:0:0:0:0 complete after 8421.708 msecs [ 5021.889778] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 8421.680 msecs [ 5021.889781] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 5389.564 msecs [ 5021.890179] PM: resume of devices complete after 8428.752 msecs [ 5021.890438] PM: resume devices took 8.430 seconds [ 5021.890495] PM: Finishing wakeup. [ 5021.890497] Restarting tasks ... done. [ 5022.085065] RX DESC ffff8800c7444000 size = 2048 [ 5022.085331] <-- RTMPAllocTxRxRingMemory, Status=0 [ 5022.087911] 1. Phy Mode = 0 [ 5022.087912] 2. Phy Mode = 0 [ 5022.115182] 3. Phy Mode = 0 [ 5022.138312] MCS Set = 00 00 00 00 00 [ 5022.139867] <==== rt28xx_init, Status=0 [ 5022.139929] 0x1300 = 00073200 [ 5022.192456] RX DESC ffff8800c7444000 size = 2048 [ 5022.192825] <-- RTMPAllocTxRxRingMemory, Status=0 [ 5022.194911] 1. Phy Mode = 0 [ 5022.194914] 2. Phy Mode = 0 [ 5022.212993] 3. Phy Mode = 0 [ 5022.214914] MCS Set = 00 00 00 00 00 [ 5022.216520] <==== rt28xx_init, Status=0 [ 5022.216588] 0x1300 = 00073200 [ 5022.223160] r8169 0000:03:00.0: eth0: link down [ 5022.224094] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5022.817806] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 5022.881554] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=0 [ 5028.002554] ===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 2641 [ 5032.630126] wlan0: no IPv6 routers present [ 5033.099910] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1696 [ 5033.100210] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) [ 5049.323916] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1704 [ 5088.010294] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 2622 [ 5148.010323] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2437 [ 5228.015988] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 2625 [ 5328.010304] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2395 [ 5448.010194] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 1554 [ 5568.010298] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1750 [ 5688.037843] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1855 [ 5808.010273] ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 2226 [ 5928.010272] ===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 2031 [ 6048.010350] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 2635 [ 6168.010272] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1809 [ 6288.010274] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2443 [ 6408.010302] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 2546 [ 6528.010270] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1712 [ 6648.010268] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1858 [ 6768.010268] ===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 2642 [ 6865.980843] show_signal_msg: 46 callbacks suppressed [ 6865.980847] nspluginwrapper[6907]: segfault at fffffffffffffff9 ip 00007f4d9f45788d sp 00007fff786bc500 error 4 in libc-2.13.so[7f4d9f3db000+18a000]