[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37869000 - 37feffd7 [ 0.000000] Allocated new RAMDISK: 008ad000 - 01033fd7 [ 0.000000] Move RAMDISK from 0000000037869000 - 0000000037feffd6 to 008ad000 - 01033fd6 [ 0.000000] ACPI: RSDP 000f6780 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 3fff3040 0002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: FACP 3fff30c0 00074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: DSDT 3fff3180 035D7 (v01 GBT AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 3fff0000 00040 [ 0.000000] ACPI: APIC 3fff67c0 00084 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac092] BRK ==> [00008a9000 - 00008ac092] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0001033fd7] NEW RAMDISK ==> [00008ad000 - 0001033fd7] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f4de0] f4de0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262027 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1034000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1839000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259979 [ 0.000000] Kernel command line: root=UUID=02c0d01c-bcf9-4071-8d1e-e1e517bfd14c ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1017840k/1048512k available (4565k kernel code, 29944k reserved, 2143k data, 540k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2666.769 MHz processor. [ 0.001601] Console: colour VGA+ 80x25 [ 0.001607] console [tty0] enabled [ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.53 BogoMIPS (lpj=10667076) [ 0.004044] Security Framework initialized [ 0.004076] AppArmor: AppArmor initialized [ 0.004088] Mount-cache hash table entries: 512 [ 0.004289] Initializing cgroup subsys ns [ 0.004299] Initializing cgroup subsys cpuacct [ 0.004305] Initializing cgroup subsys memory [ 0.004314] Initializing cgroup subsys freezer [ 0.004318] Initializing cgroup subsys net_cls [ 0.004345] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.004349] CPU: L2 cache: 256K [ 0.004353] CPU: Hyper-Threading is disabled [ 0.004358] mce: CPU supports 4 MCE banks [ 0.004374] CPU0: Thermal monitoring enabled (TM2) [ 0.004381] using mwait in idle threads. [ 0.004392] Performance Counters: no PMU driver, software counters only. [ 0.004402] Checking 'hlt' instruction... OK. [ 0.021156] SMP alternatives: switching to UP code [ 0.032018] ACPI: Core revision 20090521 [ 0.043622] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.083316] CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 09 [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (5333.53 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] Booting paravirtualized kernel on bare hardware [ 0.084001] regulator: core version 0.5 [ 0.084001] Time: 6:43:02 Date: 10/30/09 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] EISA bus registered [ 0.084001] ACPI: bus type pci registered [ 0.106011] PCI: PCI BIOS revision 2.10 entry at 0xfad90, last bus=2 [ 0.106015] PCI: Using configuration type 1 for base access [ 0.107444] bio: create slab at 0 [ 0.108186] ACPI: EC: Look up EC in DSDT [ 0.113623] ACPI: Interpreter enabled [ 0.113633] ACPI: (supports S0 S1 S4 S5) [ 0.113670] ACPI: Using IOAPIC for interrupt routing [ 0.118683] ACPI: No dock devices found. [ 0.118836] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.118902] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 0.118917] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff] [ 0.119034] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff] [ 0.119192] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.119200] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.119205] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH4 GPIO [ 0.119234] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.119242] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.119250] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.119258] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.119267] pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f] [ 0.119275] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.119311] pci 0000:00:1f.2: reg 10 io port: [0xc000-0xc007] [ 0.119319] pci 0000:00:1f.2: reg 14 io port: [0xc400-0xc403] [ 0.119326] pci 0000:00:1f.2: reg 18 io port: [0xc800-0xc807] [ 0.119334] pci 0000:00:1f.2: reg 1c io port: [0xcc00-0xcc03] [ 0.119341] pci 0000:00:1f.2: reg 20 io port: [0xd000-0xd00f] [ 0.119402] pci 0000:00:1f.3: reg 20 io port: [0x1400-0x141f] [ 0.119453] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff] [ 0.119461] pci 0000:00:1f.5: reg 14 io port: [0xdc00-0xdc3f] [ 0.119469] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfa100000-0xfa1001ff] [ 0.119477] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfa101000-0xfa1010ff] [ 0.119512] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.119517] pci 0000:00:1f.5: PME# disabled [ 0.119569] pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff] [ 0.119577] pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.119600] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.119668] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff] [ 0.119673] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.119716] pci 0000:02:02.0: reg 10 io port: [0xa000-0xa0ff] [ 0.119725] pci 0000:02:02.0: reg 14 32bit mmio: [0xfa000000-0xfa0000ff] [ 0.119770] pci 0000:02:02.0: supports D1 D2 [ 0.119773] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold [ 0.119778] pci 0000:02:02.0: PME# disabled [ 0.119820] pci 0000:02:08.0: reg 10 32bit mmio: [0xfa001000-0xfa001fff] [ 0.119828] pci 0000:02:08.0: reg 14 io port: [0xa400-0xa43f] [ 0.119871] pci 0000:02:08.0: supports D1 D2 [ 0.119874] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.119879] pci 0000:02:08.0: PME# disabled [ 0.119915] pci 0000:00:1e.0: transparent bridge [ 0.119920] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff] [ 0.119926] pci 0000:00:1e.0: bridge 32bit mmio: [0xfa000000-0xfa0fffff] [ 0.119943] pci_bus 0000:00: on NUMA node 0 [ 0.119951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.120150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.126179] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 0.126326] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.126464] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.126602] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) [ 0.126740] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.126877] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.127017] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.127153] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.127456] SCSI subsystem initialized [ 0.127572] libata version 3.00 loaded. [ 0.127716] usbcore: registered new interface driver usbfs [ 0.127756] usbcore: registered new interface driver hub [ 0.127809] usbcore: registered new device driver usb [ 0.128071] ACPI: WMI: Mapper loaded [ 0.128075] PCI: Using ACPI for IRQ routing [ 0.128276] Bluetooth: Core ver 2.15 [ 0.128361] NET: Registered protocol family 31 [ 0.128364] Bluetooth: HCI device and connection manager initialized [ 0.128369] Bluetooth: HCI socket layer initialized [ 0.128372] NetLabel: Initializing [ 0.128374] NetLabel: domain hash size = 128 [ 0.128376] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.128396] NetLabel: unlabeled traffic allowed by default [ 0.128537] hpet clockevent registered [ 0.128542] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.128548] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.128556] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.134302] pnp: PnP ACPI init [ 0.134340] ACPI: bus type pnp registered [ 0.137754] pnp: PnP ACPI: found 11 devices [ 0.137760] ACPI: ACPI bus type pnp unregistered [ 0.137768] PnPBIOS: Disabled by ACPI PNP [ 0.137789] system 00:00: iomem range 0xcf000-0xcffff has been reserved [ 0.137795] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.137799] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.137803] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.137807] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 0.137811] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.137815] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.137819] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.137824] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.137827] system 00:00: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.137831] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.137835] system 00:00: iomem range 0xfff00000-0xffffffff has been reserved [ 0.137839] system 00:00: iomem range 0xe0000-0xeffff has been reserved [ 0.137851] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.137855] system 00:02: ioport range 0x290-0x29f has been reserved [ 0.137858] system 00:02: ioport range 0x800-0x805 has been reserved [ 0.137862] system 00:02: ioport range 0x880-0x88f has been reserved [ 0.172598] AppArmor: AppArmor Filesystem Enabled [ 0.172638] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.172641] pci 0000:00:01.0: IO window: disabled [ 0.172648] pci 0000:00:01.0: MEM window: 0xf8000000-0xf9ffffff [ 0.172654] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf7ffffff [ 0.172659] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.172663] pci 0000:00:1e.0: IO window: 0xa000-0xafff [ 0.172670] pci 0000:00:1e.0: MEM window: 0xfa000000-0xfa0fffff [ 0.172675] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.172694] pci 0000:00:1e.0: setting latency timer to 64 [ 0.172701] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.172705] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.172708] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xf9ffffff] [ 0.172712] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff] [ 0.172715] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.172719] pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfa0fffff] [ 0.172722] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.172725] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.172780] NET: Registered protocol family 2 [ 0.172930] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.173433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.174592] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.175235] TCP: Hash tables configured (established 131072 bind 65536) [ 0.175243] TCP reno registered [ 0.175469] NET: Registered protocol family 1 [ 0.175576] Trying to unpack rootfs image as initramfs... [ 0.465012] Freeing initrd memory: 7707k freed [ 0.475872] cpufreq-nforce2: No nForce2 chipset. [ 0.475917] Scanning for low memory corruption every 60 seconds [ 0.476159] audit: initializing netlink socket (disabled) [ 0.476185] type=2000 audit(1256884982.476:1): initialized [ 0.486374] highmem bounce pool size: 64 pages [ 0.486384] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.488229] VFS: Disk quotas dquot_6.5.2 [ 0.488331] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.489123] fuse init (API version 7.12) [ 0.489258] msgmni has been set to 1731 [ 0.489627] alg: No test for stdrng (krng) [ 0.489653] io scheduler noop registered [ 0.489656] io scheduler anticipatory registered [ 0.489658] io scheduler deadline registered [ 0.489755] io scheduler cfq registered (default) [ 0.489797] pci 0000:01:00.0: Boot video device [ 0.489822] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.489947] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.489985] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.490169] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.490176] ACPI: Power Button [PWRF] [ 0.490246] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.490250] ACPI: Power Button [PWRB] [ 0.490322] fan PNP0C0B:00: registered as cooling_device0 [ 0.490331] ACPI: Fan [FAN] (on) [ 0.490630] processor LNXCPU:00: registered as cooling_device1 [ 0.493088] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.493101] ACPI: Thermal Zone [THRM] (22 C) [ 0.493297] isapnp: Scanning for PnP cards... [ 0.632025] Switched to high resolution mode on CPU 0 [ 0.847238] isapnp: No Plug & Play device found [ 0.848862] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.849042] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.849443] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.850814] brd: module loaded [ 0.851446] loop: module loaded [ 0.851602] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.851766] ata_piix 0000:00:1f.1: version 2.13 [ 0.851793] alloc irq_desc for 18 on node -1 [ 0.851796] alloc kstat_irqs on node -1 [ 0.851807] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.851869] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.852038] scsi0 : ata_piix [ 0.852208] scsi1 : ata_piix [ 0.853239] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.853245] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.853286] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.853294] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.853360] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.853611] scsi2 : ata_piix [ 0.853874] scsi3 : ata_piix [ 0.854704] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xc400 bmdma 0xd000 irq 18 [ 0.854709] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xcc00 bmdma 0xd008 irq 18 [ 0.855803] Fixed MDIO Bus: probed [ 0.855857] PPP generic driver version 2.4.2 [ 0.856297] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.856346] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.856370] uhci_hcd: USB Universal Host Controller Interface driver [ 0.856506] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.856827] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.856837] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.856945] mice: PS/2 mouse device common for all mice [ 0.857069] rtc_cmos 00:04: RTC can wake from S4 [ 0.857133] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.857161] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.857325] device-mapper: uevent: version 1.0.3 [ 0.857671] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.857782] device-mapper: multipath: version 1.1.0 loaded [ 0.857786] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.858020] EISA: Probing bus 0 at eisa.0 [ 0.858031] Cannot allocate resource for EISA slot 1 [ 0.858061] EISA: Detected 0 cards. [ 0.858159] cpuidle: using governor ladder [ 0.858164] cpuidle: using governor menu [ 0.858928] TCP cubic registered [ 0.859119] NET: Registered protocol family 10 [ 0.859800] lo: Disabled Privacy Extensions [ 0.860253] NET: Registered protocol family 17 [ 0.860299] Bluetooth: L2CAP ver 2.13 [ 0.860302] Bluetooth: L2CAP socket layer initialized [ 0.860306] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.860308] Bluetooth: SCO socket layer initialized [ 0.860397] Bluetooth: RFCOMM TTY layer initialized [ 0.860402] Bluetooth: RFCOMM socket layer initialized [ 0.860404] Bluetooth: RFCOMM ver 1.11 [ 0.860472] Using IPI No-Shortcut mode [ 0.860606] PM: Resume from disk failed. [ 0.860629] registered taskstats version 1 [ 0.860753] Magic number: 13:597:722 [ 0.860769] block loop2: hash matches [ 0.860845] rtc_cmos 00:04: setting system clock to 2009-10-30 06:43:03 UTC (1256884983) [ 0.860850] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.860852] EDD information not available. [ 0.873988] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.048280] ata1.00: HPA unlocked: 156299375 -> 156301488, native 156301488 [ 1.048287] ata1.00: ATA-6: WDC WD800JB-00JJC0, 05.01C05, max UDMA/100 [ 1.048291] ata1.00: 156301488 sectors, multi 16: LBA [ 1.056276] ata1.01: HPA unlocked: 78240863 -> 78242976, native 78242976 [ 1.056282] ata1.01: ATA-7: SAMSUNG SP0411N, TW100-13, max UDMA/100 [ 1.056285] ata1.01: 78242976 sectors, multi 16: LBA48 [ 1.064325] ata1.00: configured for UDMA/100 [ 1.072302] ata1.01: configured for UDMA/100 [ 1.072485] scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00JJ 05.0 PQ: 0 ANSI: 5 [ 1.072694] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.072834] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP0411N TW10 PQ: 0 ANSI: 5 [ 1.073010] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.073105] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.073185] sd 0:0:0:0: [sda] Write Protect is off [ 1.073190] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.073228] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.073453] sda: [ 1.091988] sd 0:0:1:0: [sdb] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB) [ 1.092073] sd 0:0:1:0: [sdb] Write Protect is off [ 1.092078] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.092115] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.092339] sdb: sda1 sda2 sda3 sda4 < sdb1 [ 1.119302] sda5 [ 1.138456] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.138470] sda6 > [ 1.158730] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.158757] Freeing unused kernel memory: 540k freed [ 1.159462] Write protecting the kernel text: 4568k [ 1.159500] Write protecting the kernel read-only data: 1836k [ 1.396445] Linux agpgart interface v0.103 [ 1.457645] agpgart-intel 0000:00:00.0: Intel 865 Chipset [ 1.481092] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.481143] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.484955] 8139too Fast Ethernet driver 0.9.28 [ 1.485022] alloc irq_desc for 22 on node -1 [ 1.485026] alloc kstat_irqs on node -1 [ 1.485038] 8139too 0000:02:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.486281] eth0: RealTek RTL8139 at 0xa000, 00:50:fc:a2:5b:a0, IRQ 22 [ 1.512809] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 1.515688] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.515693] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.515765] alloc irq_desc for 20 on node -1 [ 1.515769] alloc kstat_irqs on node -1 [ 1.515781] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.539556] e100 0000:02:08.0: PME# disabled [ 1.671452] e100: eth1: e100_probe: addr 0xfa001000, irq 20, MAC addr 00:16:e6:34:57:70 [ 3.203389] xor: automatically using best checksumming function: pIII_sse [ 3.220009] pIII_sse : 4084.000 MB/sec [ 3.220013] xor: using function: pIII_sse (4084.000 MB/sec) [ 3.224412] device-mapper: dm-raid45: initialized v0.2594b [ 3.448625] PM: Starting manual resume from disk [ 3.448633] PM: Resume from partition 8:2 [ 3.448635] PM: Checking hibernation image. [ 3.448875] PM: Resume from disk failed. [ 3.481300] kjournald starting. Commit interval 5 seconds [ 3.481327] EXT3-fs: mounted filesystem with writeback data mode. [ 4.684926] type=1505 audit(1256884987.323:2): operation="profile_load" pid=361 name=/usr/share/gdm/guest-session/Xsession [ 4.925220] type=1505 audit(1256884987.563:3): operation="profile_load" pid=362 name=/sbin/dhclient3 [ 4.925376] type=1505 audit(1256884987.563:4): operation="profile_load" pid=362 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.925462] type=1505 audit(1256884987.563:5): operation="profile_load" pid=362 name=/usr/lib/connman/scripts/dhclient-script [ 17.580776] type=1505 audit(1256885000.219:6): operation="profile_load" pid=363 name=/usr/bin/evince [ 17.582126] type=1505 audit(1256885000.219:7): operation="profile_load" pid=363 name=/usr/bin/evince-previewer [ 17.583524] type=1505 audit(1256885000.219:8): operation="profile_load" pid=363 name=/usr/bin/evince-thumbnailer [ 17.996384] type=1505 audit(1256885000.635:9): operation="profile_load" pid=365 name=/usr/lib/cups/backend/cups-pdf [ 17.996653] type=1505 audit(1256885000.635:10): operation="profile_load" pid=365 name=/usr/sbin/cupsd [ 18.123358] type=1505 audit(1256885000.759:11): operation="profile_load" pid=366 name=/usr/sbin/mysqld [ 18.240621] type=1505 audit(1256885000.879:12): operation="profile_load" pid=367 name=/usr/sbin/mysqld-akonadi [ 18.347732] type=1505 audit(1256885000.983:13): operation="profile_load" pid=368 name=/usr/sbin/named [ 18.463095] type=1505 audit(1256885001.099:14): operation="profile_load" pid=369 name=/usr/sbin/tcpdump [ 19.446478] Adding 1004052k swap on /dev/sda2. Priority:-1 extents:1 across:1004052k [ 20.224315] EXT3 FS on sdb1, internal journal [ 21.468796] udev: starting version 147 [ 24.393215] parport_pc 00:08: reported by Plug and Play ACPI [ 24.393277] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 24.408758] intel_rng: FWH not detected [ 24.408938] lp: driver loaded but no devices found [ 24.480277] lp0: using parport0 (interrupt-driven). [ 24.499060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.505716] ppdev: user-space parallel port driver [ 24.657013] udev: renamed network interface eth1 to eth2 [ 24.702096] udev: renamed network interface eth0_rename to eth1 [ 24.852723] psmouse serio1: ID: 10 00 64 [ 25.359352] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 25.466593] nvidia: module license 'NVIDIA' taints kernel. [ 25.466600] Disabling lock debugging due to kernel taint [ 25.731601] alloc irq_desc for 16 on node -1 [ 25.731607] alloc kstat_irqs on node -1 [ 25.731619] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 25.732068] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.13 Thu Jun 25 18:42:21 PDT 2009 [ 25.813132] [drm] Initialized drm 1.1.0 20060810 [ 27.311452] nouveau 0000:01:00.0: Detected an NV17 generation card (0x018100a2) [ 27.311496] [drm] Initialized nouveau 0.0.15 v2.6.31-rc6-539-ged53f9fcabd42f004 for 0000:01:00.0 on minor 0 [ 27.651808] ip_tables: (C) 2000-2006 Netfilter Core Team [ 28.512555] alloc irq_desc for 17 on node -1 [ 28.512560] alloc kstat_irqs on node -1 [ 28.512571] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 28.512742] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 28.749205] type=1505 audit(1256885011.387:15): operation="profile_replace" pid=772 name=/usr/share/gdm/guest-session/Xsession [ 28.836049] intel8x0_measure_ac97_clock: measured 54298 usecs (2617 samples) [ 28.836055] intel8x0: clocking to 48000 [ 29.004661] type=1505 audit(1256885011.643:16): operation="profile_replace" pid=773 name=/sbin/dhclient3 [ 29.005014] type=1505 audit(1256885011.643:17): operation="profile_replace" pid=773 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 29.005224] type=1505 audit(1256885011.643:18): operation="profile_replace" pid=773 name=/usr/lib/connman/scripts/dhclient-script [ 37.023155] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 37.465526] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 43.170079] type=1505 audit(1256885025.807:19): operation="profile_replace" pid=779 name=/usr/bin/evince [ 43.173712] type=1505 audit(1256885025.811:20): operation="profile_replace" pid=779 name=/usr/bin/evince-previewer [ 43.175918] type=1505 audit(1256885025.811:21): operation="profile_replace" pid=779 name=/usr/bin/evince-thumbnailer [ 43.561795] type=1505 audit(1256885026.199:22): operation="profile_replace" pid=1046 name=/usr/lib/cups/backend/cups-pdf [ 43.562251] type=1505 audit(1256885026.199:23): operation="profile_replace" pid=1046 name=/usr/sbin/cupsd [ 43.676638] type=1505 audit(1256885026.315:24): operation="profile_replace" pid=1047 name=/usr/sbin/mysqld [ 43.789842] type=1505 audit(1256885026.427:25): operation="profile_replace" pid=1048 name=/usr/sbin/mysqld-akonadi [ 43.894577] type=1505 audit(1256885026.531:26): operation="profile_replace" pid=1049 name=/usr/sbin/named [ 44.002910] type=1505 audit(1256885026.639:27): operation="profile_replace" pid=1050 name=/usr/sbin/tcpdump [ 44.790966] agpgart-intel 0000:00:00.0: AGP 3.0 bridge [ 44.790991] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode [ 44.791020] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 47.168009] eth1: no IPv6 routers present