[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x504 with crng_init=0 [ 0.000000] Linux version 4.13.0-31-generic (buildd@lcy01-amd64-013) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #34~16.04.1-Ubuntu SMP Fri Jan 19 17:11:01 UTC 2018 (Ubuntu 4.13.0-31.34~16.04.1-generic 4.13.13) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-31-generic root=UUID=d4a28a9c-0fc1-4827-afa2-2dfde774939c ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000b88fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b88ff000-0x00000000b9c7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9c7f000-0x00000000b9f60fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9f61000-0x00000000b9f7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b9f7f000-0x00000000b9ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba000000-0x00000000bf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.61 01/21/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ee00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 13F000000 mask FFF000000 uncachable [ 0.000000] 7 base 13EE00000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff8a5740097000] 97000 size 24576 [ 0.000000] BRK [0x4b72a000, 0x4b72afff] PGTABLE [ 0.000000] BRK [0x4b72b000, 0x4b72bfff] PGTABLE [ 0.000000] BRK [0x4b72c000, 0x4b72cfff] PGTABLE [ 0.000000] BRK [0x4b72d000, 0x4b72dfff] PGTABLE [ 0.000000] BRK [0x4b72e000, 0x4b72efff] PGTABLE [ 0.000000] BRK [0x4b72f000, 0x4b72ffff] PGTABLE [ 0.000000] BRK [0x4b730000, 0x4b730fff] PGTABLE [ 0.000000] BRK [0x4b731000, 0x4b731fff] PGTABLE [ 0.000000] BRK [0x4b732000, 0x4b732fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x32232000-0x35110fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F2F10 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000B9FFE120 00008C (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 0.000000] ACPI: FACP 0x00000000B9FFC000 00010C (v05 HPQOEM 179B 0000000F HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000B9FD3000 02362C (v02 HPQOEM 179B 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 0x00000000B9C34000 000040 [ 0.000000] ACPI: FACS 0x00000000B9C34000 000040 [ 0.000000] ACPI: HPET 0x00000000B9FFB000 000038 (v01 HPQOEM 179B 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000B9FFA000 0000BC (v01 HPQOEM 179B 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000B9FF9000 00003C (v01 HPQOEM 179B 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x00000000B9FF7000 000032 (v02 HPQOEM 179B 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000B9FD0000 0002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000B9FCF000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: SLIC 0x00000000B9FCE000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FPDT 0x00000000B9FCC000 000044 (v01 HPQOEM 179B 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 0x00000000B9FCB000 000038 (v00 HPQOEM 179B 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000B9FCA000 0009B6 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000B9FC9000 000AAD (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: ASF! 0x00000000B9FF8000 0000A5 (v32 HPQOEM 179B 00000001 HP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013edfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x13edd3000-0x13edfdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013edfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000b88fefff] [ 0.000000] node 0: [mem 0x00000000b9c7f000-0x00000000b9f60fff] [ 0.000000] node 0: [mem 0x00000000b9fff000-0x00000000b9ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013edfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013edfffff] [ 0.000000] On node 0 totalpages: 1013629 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11752 pages used for memmap [ 0.000000] DMA32 zone: 752097 pages, LIFO batch:31 [ 0.000000] Normal zone: 4024 pages used for memmap [ 0.000000] Normal zone: 257536 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000bb200000-0x00000000bf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb88ff000-0xb9c7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9f61000-0xb9f7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9f7f000-0xb9ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] e820: [mem 0xbf200000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu @ffff8a587ea00000 s146520 r8192 d29608 u262144 [ 0.000000] pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 997768 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-31-generic root=UUID=d4a28a9c-0fc1-4827-afa2-2dfde774939c ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3847404K/4054516K available (12300K kernel code, 2481K rwdata, 4004K rodata, 2364K init, 2368K bss, 207112K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 37823 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2793.725 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.45 BogoMIPS (lpj=11174900) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.014129] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.014151] Security Framework initialized [ 0.014152] Yama: becoming mindful. [ 0.014169] AppArmor: AppArmor initialized [ 0.014783] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.015090] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.015108] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.015120] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.015295] CPU: Physical Processor ID: 0 [ 0.015296] CPU: Processor Core ID: 0 [ 0.015301] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.015301] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.015302] FEATURE SPEC_CTRL Not Present [ 0.015305] mce: CPU supports 7 MCE banks [ 0.015312] CPU0: Thermal monitoring enabled (TM1) [ 0.015320] process: using mwait in idle threads [ 0.015322] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.015323] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.015425] Freeing SMP alternatives memory: 36K [ 0.017181] smpboot: Max logical packages: 4 [ 0.017256] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.017711] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.057408] TSC deadline timer enabled [ 0.057411] smpboot: CPU0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.057469] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.057488] ... version: 3 [ 0.057488] ... bit width: 48 [ 0.057489] ... generic registers: 4 [ 0.057489] ... value mask: 0000ffffffffffff [ 0.057490] ... max period: 00007fffffffffff [ 0.057490] ... fixed-purpose events: 3 [ 0.057490] ... event mask: 000000070000000f [ 0.057522] Hierarchical SRCU implementation. [ 0.058298] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.058312] smp: Bringing up secondary CPUs ... [ 0.058376] x86: Booting SMP configuration: [ 0.058377] .... node #0, CPUs: #1 #2 #3 [ 0.062440] smp: Brought up 1 node, 4 CPUs [ 0.062440] smpboot: Total of 4 processors activated (22349.80 BogoMIPS) [ 0.064200] devtmpfs: initialized [ 0.064200] x86/mm: Memory block size: 128MB [ 0.064330] evm: security.selinux [ 0.064331] evm: security.SMACK64 [ 0.064331] evm: security.SMACK64EXEC [ 0.064331] evm: security.SMACK64TRANSMUTE [ 0.064332] evm: security.SMACK64MMAP [ 0.064332] evm: security.ima [ 0.064333] evm: security.capability [ 0.064344] PM: Registering ACPI NVS region [mem 0xb9f61000-0xb9f7efff] (122880 bytes) [ 0.064344] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.064344] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.064344] pinctrl core: initialized pinctrl subsystem [ 0.064344] RTC time: 8:57:48, date: 02/06/18 [ 0.064344] NET: Registered protocol family 16 [ 0.064413] cpuidle: using governor ladder [ 0.064413] cpuidle: using governor menu [ 0.064413] PCCT header not found. [ 0.064413] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.064413] ACPI: bus type PCI registered [ 0.064413] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.064413] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.064413] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.064413] PCI: Using configuration type 1 for base access [ 0.064413] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.064413] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.064413] mtrr: probably your BIOS does not setup all CPUs. [ 0.064413] mtrr: corrected configuration. [ 0.064892] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.064892] ACPI: Added _OSI(Module Device) [ 0.064892] ACPI: Added _OSI(Processor Device) [ 0.064892] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.064892] ACPI: Added _OSI(Processor Aggregator Device) [ 0.064892] ACPI: Executed 1 blocks of module-level executable AML code [ 0.071547] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.085286] ACPI: Dynamic OEM Table Load: [ 0.085294] ACPI: SSDT 0xFFFF8A58796EF000 000861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.085542] ACPI: Dynamic OEM Table Load: [ 0.085546] ACPI: SSDT 0xFFFF8A5879799C00 000303 (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.085726] ACPI: Dynamic OEM Table Load: [ 0.085730] ACPI: SSDT 0xFFFF8A58797A0200 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.086391] ACPI: EC: EC started [ 0.086391] ACPI: EC: interrupt blocked [ 0.542112] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.542114] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.542115] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.542116] ACPI: Interpreter enabled [ 0.542134] ACPI: (supports S0 S3 S4 S5) [ 0.542134] ACPI: Using IOAPIC for interrupt routing [ 0.542152] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.542370] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.544052] ACPI: Power Resource [APPR] (off) [ 0.545924] ACPI: Power Resource [COMP] (off) [ 0.546313] ACPI: Power Resource [LPP] (on) [ 0.549260] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.549265] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.550519] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.550520] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.550878] PCI host bridge to bus 0000:00 [ 0.550880] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.550881] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.550882] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.550883] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window] [ 0.550884] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window] [ 0.550885] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 0.550886] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.550892] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.550968] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.550978] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit] [ 0.550983] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.550987] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.551086] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.551108] pci 0000:00:14.0: reg 0x10: [mem 0xd4720000-0xd472ffff 64bit] [ 0.551171] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.551232] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.551256] pci 0000:00:16.0: reg 0x10: [mem 0xd4734000-0xd473400f 64bit] [ 0.551334] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.551391] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002 [ 0.551411] pci 0000:00:16.3: reg 0x10: [io 0x4090-0x4097] [ 0.551420] pci 0000:00:16.3: reg 0x14: [mem 0xd473b000-0xd473bfff] [ 0.551547] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.551565] pci 0000:00:19.0: reg 0x10: [mem 0xd4700000-0xd471ffff] [ 0.551573] pci 0000:00:19.0: reg 0x14: [mem 0xd473a000-0xd473afff] [ 0.551580] pci 0000:00:19.0: reg 0x18: [io 0x4060-0x407f] [ 0.551642] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.551701] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.551722] pci 0000:00:1a.0: reg 0x10: [mem 0xd4739000-0xd47393ff] [ 0.551808] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.551870] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.551890] pci 0000:00:1b.0: reg 0x10: [mem 0xd4730000-0xd4733fff 64bit] [ 0.551966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.552033] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.552121] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.552184] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.552270] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.552335] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.552423] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.552486] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.552572] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.552641] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.552661] pci 0000:00:1d.0: reg 0x10: [mem 0xd4738000-0xd47383ff] [ 0.552747] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.552809] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 0.552969] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.552986] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.552993] pci 0000:00:1f.2: reg 0x14: [io 0x409c-0x409f] [ 0.553001] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.553008] pci 0000:00:1f.2: reg 0x1c: [io 0x4098-0x409b] [ 0.553015] pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f] [ 0.553022] pci 0000:00:1f.2: reg 0x24: [mem 0xd4737000-0xd47377ff] [ 0.553066] pci 0000:00:1f.2: PME# supported from D3hot [ 0.553158] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.553163] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff] [ 0.553252] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 0.553256] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] [ 0.553259] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.553362] pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010 [ 0.553409] pci 0000:23:00.0: reg 0x10: [mem 0xd4500000-0xd45007ff] [ 0.553430] pci 0000:23:00.0: reg 0x14: [mem 0xd4505000-0xd45050ff] [ 0.553732] pci 0000:23:00.1: [197b:2392] type 00 class 0x088000 [ 0.553775] pci 0000:23:00.1: reg 0x10: [mem 0xd4504000-0xd45040ff] [ 0.553887] pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref] [ 0.554069] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501 [ 0.554113] pci 0000:23:00.2: reg 0x10: [mem 0xd4503000-0xd45030ff] [ 0.568059] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 0.568069] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff] [ 0.568292] pci 0000:24:00.0: [8086:0082] type 00 class 0x028000 [ 0.568518] pci 0000:24:00.0: reg 0x10: [mem 0xd4400000-0xd4401fff 64bit] [ 0.569340] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold [ 0.584161] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 0.584166] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff] [ 0.584943] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.584983] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.585022] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.585060] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.585098] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.585135] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.585173] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.585210] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.588003] ACPI: EC: interrupt unblocked [ 0.588003] ACPI: EC: event unblocked [ 0.588003] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.588003] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.588003] SCSI subsystem initialized [ 0.588016] libata version 3.00 loaded. [ 0.588020] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.588020] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.588020] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.588020] vgaarb: loaded [ 0.588025] ACPI: bus type USB registered [ 0.588038] usbcore: registered new interface driver usbfs [ 0.588043] usbcore: registered new interface driver hub [ 0.588055] usbcore: registered new device driver usb [ 0.588082] EDAC MC: Ver: 3.0.0 [ 0.588116] PCI: Using ACPI for IRQ routing [ 0.596350] PCI: pci_cache_line_size set to 64 bytes [ 0.596462] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.596463] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.596464] e820: reserve RAM buffer [mem 0xb88ff000-0xbbffffff] [ 0.596465] e820: reserve RAM buffer [mem 0xb9f61000-0xbbffffff] [ 0.596466] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff] [ 0.596466] e820: reserve RAM buffer [mem 0x13ee00000-0x13fffffff] [ 0.596538] NetLabel: Initializing [ 0.596539] NetLabel: domain hash size = 128 [ 0.596539] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.596553] NetLabel: unlabeled traffic allowed by default [ 0.596566] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.596566] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.598061] clocksource: Switched to clocksource hpet [ 0.604431] VFS: Disk quotas dquot_6.6.0 [ 0.604452] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.604538] AppArmor: AppArmor Filesystem Enabled [ 0.604580] pnp: PnP ACPI init [ 0.604752] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.604753] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 0.604755] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.604756] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.604757] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.604759] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.604760] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.604761] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.604762] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.604766] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.604890] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.604952] system 00:02: [io 0x0200-0x027f] has been reserved [ 0.604953] system 00:02: [io 0x1000-0x100f] has been reserved [ 0.604954] system 00:02: [io 0xffff] has been reserved [ 0.604955] system 00:02: [io 0xffff] has been reserved [ 0.604957] system 00:02: [io 0x0400-0x047f] has been reserved [ 0.604958] system 00:02: [io 0x0500-0x057f] has been reserved [ 0.604959] system 00:02: [io 0xef80-0xef9f] has been reserved [ 0.604961] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.604982] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.605293] pnp 00:04: [dma 0 disabled] [ 0.605345] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.605366] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.605381] pnp 00:06: Plug and Play ACPI device, IDs SYN018e SYN0100 SYN0002 PNP0f13 (active) [ 0.605608] system 00:07: [mem 0x20000000-0x201fffff] has been reserved [ 0.605609] system 00:07: [mem 0x40004000-0x40004fff] has been reserved [ 0.605611] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.605773] pnp: PnP ACPI: found 8 devices [ 0.611823] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.611828] pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window [ 0.611848] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000 add_align 100000 [ 0.611871] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbf200000-0xbf3fffff 64bit pref] [ 0.611873] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.611878] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff] [ 0.611886] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 0.611888] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] [ 0.611893] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.611897] pci 0000:00:1c.1: bridge window [mem 0xbf200000-0xbf3fffff 64bit pref] [ 0.611904] pci 0000:23:00.1: BAR 6: assigned [mem 0xd4508000-0xd450ffff pref] [ 0.611905] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 0.611910] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff] [ 0.611917] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 0.611921] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff] [ 0.611930] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.611931] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.611932] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.611933] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window] [ 0.611934] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window] [ 0.611935] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window] [ 0.611936] pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff] [ 0.611937] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff] [ 0.611938] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff] [ 0.611939] pci_bus 0000:02: resource 2 [mem 0xbf200000-0xbf3fffff 64bit pref] [ 0.611940] pci_bus 0000:23: resource 1 [mem 0xd4500000-0xd45fffff] [ 0.611941] pci_bus 0000:24: resource 1 [mem 0xd4400000-0xd44fffff] [ 0.612035] NET: Registered protocol family 2 [ 0.612169] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.612224] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.612282] TCP: Hash tables configured (established 32768 bind 32768) [ 0.612309] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.612321] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.612362] NET: Registered protocol family 1 [ 0.612374] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.612381] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 0.612474] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.612475] pci 0000:00:14.0: PCI INT A: no GSI [ 0.612944] PCI: CLS 64 bytes, default 64 [ 0.612977] Unpacking initramfs... [ 1.240721] Freeing initrd memory: 47996K [ 1.240724] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.240726] software IO TLB [mem 0xb48ff000-0xb88ff000] (64MB) mapped at [ffff8a57f48ff000-ffff8a57f88fefff] [ 1.240797] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than Reserved [mem 0xfed10000-0xfed13fff] [ 1.240801] caller snb_uncore_imc_init_box+0x6b/0xb0 mapping multiple BARs [ 1.240954] Scanning for low memory corruption every 60 seconds [ 1.241217] audit: initializing netlink subsys (disabled) [ 1.241263] audit: type=2000 audit(1517907469.241:1): state=initialized audit_enabled=0 res=1 [ 1.241568] Initialise system trusted keyrings [ 1.241576] Key type blacklist registered [ 1.241609] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.242495] zbud: loaded [ 1.242807] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.242918] fuse init (API version 7.26) [ 1.244103] Key type asymmetric registered [ 1.244104] Asymmetric key parser 'x509' registered [ 1.244132] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.244158] io scheduler noop registered [ 1.244159] io scheduler deadline registered [ 1.244178] io scheduler cfq registered (default) [ 1.244997] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 [ 1.245022] pcieport 0000:00:1c.1: Signaling PME with IRQ 25 [ 1.245040] pcieport 0000:00:1c.2: Signaling PME with IRQ 26 [ 1.245069] pcieport 0000:00:1c.3: Signaling PME with IRQ 27 [ 1.245085] pciehp 0000:00:1c.1:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 1.245146] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 1.245147] vesafb: scrolling: redraw [ 1.245148] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.245155] vesafb: framebuffer at 0xc0000000, mapped to 0xffffb54501000000, using 4160k, total 4160k [ 1.245226] Console: switching to colour frame buffer device 170x48 [ 1.245241] fb0: VESA VGA frame buffer device [ 1.245250] intel_idle: MWAIT substates: 0x21120 [ 1.245251] intel_idle: v0.4.1 model 0x3A [ 1.245367] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.684160] ACPI: AC Adapter [AC] (off-line) [ 1.684207] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.684215] ACPI: Sleep Button [SLPB] [ 1.684260] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.684285] ACPI: Lid Switch [LID] [ 1.684310] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.684388] ACPI: Power Button [PWRF] [ 1.703721] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.708707] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.708708] ACPI: Thermal Zone [CPUZ] (48 C) [ 1.732568] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.732569] ACPI: Thermal Zone [GFXZ] (0 C) [ 1.747423] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.747424] ACPI: Thermal Zone [EXTZ] (28 C) [ 1.762370] thermal LNXTHERM:03: registered as thermal_zone3 [ 1.762371] ACPI: Thermal Zone [LOCZ] (27 C) [ 1.777272] thermal LNXTHERM:04: registered as thermal_zone4 [ 1.777273] ACPI: Thermal Zone [BATZ] (28 C) [ 1.777533] thermal LNXTHERM:05: registered as thermal_zone5 [ 1.777534] ACPI: Thermal Zone [PCHZ] (127 C) [ 1.777559] GHES: HEST is not enabled! [ 1.777682] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.799634] 0000:00:16.3: ttyS4 at I/O 0x4090 (irq = 17, base_baud = 115200) is a 16550A [ 1.799947] Linux agpgart interface v0.103 [ 1.821201] ACPI: Battery Slot [BAT0] (battery present) [ 1.821250] ACPI: Battery Slot [BAT1] (battery absent) [ 1.880099] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) [ 2.170467] loop: module loaded [ 2.170591] libphy: Fixed MDIO Bus: probed [ 2.170591] tun: Universal TUN/TAP device driver, 1.6 [ 2.170620] PPP generic driver version 2.4.2 [ 2.170653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.170655] ehci-pci: EHCI PCI platform driver [ 2.170791] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.170796] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.170807] ehci-pci 0000:00:1a.0: debug port 2 [ 2.174715] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2.174724] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4739000 [ 2.188019] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.188054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.188056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.188057] usb usb1: Product: EHCI Host Controller [ 2.188057] usb usb1: Manufacturer: Linux 4.13.0-31-generic ehci_hcd [ 2.188058] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.188175] hub 1-0:1.0: USB hub found [ 2.188179] hub 1-0:1.0: 3 ports detected [ 2.188388] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.188391] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.188401] ehci-pci 0000:00:1d.0: debug port 2 [ 2.192293] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.192296] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4738000 [ 2.208018] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.208046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.208047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.208048] usb usb2: Product: EHCI Host Controller [ 2.208049] usb usb2: Manufacturer: Linux 4.13.0-31-generic ehci_hcd [ 2.208050] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.208154] hub 2-0:1.0: USB hub found [ 2.208157] hub 2-0:1.0: 3 ports detected [ 2.208259] ehci-platform: EHCI generic platform driver [ 2.208267] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.208272] ohci-pci: OHCI PCI platform driver [ 2.208277] ohci-platform: OHCI generic platform driver [ 2.208281] uhci_hcd: USB Universal Host Controller Interface driver [ 2.208380] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 2.208381] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 2.208399] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.208402] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.209482] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 2.209487] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.209562] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.209563] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.209564] usb usb3: Product: xHCI Host Controller [ 2.209565] usb usb3: Manufacturer: Linux 4.13.0-31-generic xhci-hcd [ 2.209566] usb usb3: SerialNumber: 0000:00:14.0 [ 2.209666] hub 3-0:1.0: USB hub found [ 2.209673] hub 3-0:1.0: 4 ports detected [ 2.209904] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.209906] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.209930] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.209931] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.209932] usb usb4: Product: xHCI Host Controller [ 2.209933] usb usb4: Manufacturer: Linux 4.13.0-31-generic xhci-hcd [ 2.209933] usb usb4: SerialNumber: 0000:00:14.0 [ 2.210063] hub 4-0:1.0: USB hub found [ 2.210070] hub 4-0:1.0: 4 ports detected [ 2.210326] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.212111] i8042: Detected active multiplexing controller, rev 1.1 [ 2.212867] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.212872] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.212893] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.212908] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.212924] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.213061] mousedev: PS/2 mouse device common for all mice [ 2.213310] rtc_cmos 00:03: RTC can wake from S4 [ 2.213427] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.213451] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.213457] i2c /dev entries driver [ 2.213496] device-mapper: uevent: version 1.0.3 [ 2.213548] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 2.213552] intel_pstate: Intel P-state driver initializing [ 2.213689] ledtrig-cpu: registered to indicate activity on CPUs [ 2.213965] NET: Registered protocol family 10 [ 2.217128] Segment Routing with IPv6 [ 2.217143] NET: Registered protocol family 17 [ 2.217150] Key type dns_resolver registered [ 2.217549] RAS: Correctable Errors collector initialized. [ 2.217573] microcode: sig=0x306a9, pf=0x10, revision=0x16 [ 2.217680] microcode: Microcode Update Driver: v2.2. [ 2.217723] sched_clock: Marking stable (2217676890, 0)->(2217901455, -224565) [ 2.217882] registered taskstats version 1 [ 2.217888] Loading compiled-in X.509 certificates [ 2.219782] Loaded X.509 cert 'Build time autogenerated kernel key: 61eb76328e0157b319817d11297b1aa90d9bd673' [ 2.219797] zswap: loaded using pool lzo/zbud [ 2.222267] Key type big_key registered [ 2.222270] Key type trusted registered [ 2.223466] Key type encrypted registered [ 2.223468] AppArmor: AppArmor sha1 policy hashing enabled [ 2.237662] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.268046] tsc: Refined TSC clocksource calibration: 2793.653 MHz [ 2.268060] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2844d4ef8cd, max_idle_ns: 440795255620 ns [ 2.516045] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.536041] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.664431] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.664434] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.664676] hub 1-1:1.0: USB hub found [ 2.664767] hub 1-1:1.0: 6 ports detected [ 2.684430] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.684434] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.684822] hub 2-1:1.0: USB hub found [ 2.684891] hub 2-1:1.0: 8 ports detected [ 2.952044] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.972045] usb 2-1.6: new full-speed USB device number 3 using ehci-pci [ 2.972150] evm: HMAC attrs: 0x1 [ 2.972478] Magic number: 6:713:977 [ 2.972577] rtc_cmos 00:03: setting system clock to 2018-02-06 08:57:51 UTC (1517907471) [ 2.972633] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.972633] EDD information not available. [ 2.972676] PM: Hibernation image not present or could not be loaded. [ 2.974360] Freeing unused kernel memory: 2364K [ 2.974361] Write protecting the kernel read-only data: 18432k [ 2.974748] Freeing unused kernel memory: 2024K [ 2.974908] Freeing unused kernel memory: 92K [ 2.976509] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.976509] x86/mm: Checking user space page tables [ 2.977853] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.035173] pps_core: LinuxPPS API ver. 1 registered [ 3.035174] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.036261] PTP clock support registered [ 3.056433] sdhci: Secure Digital Host Controller Interface driver [ 3.056434] sdhci: Copyright(c) Pierre Ossman [ 3.058134] sdhci-pci 0000:23:00.1: SDHCI controller found [197b:2392] (rev 30) [ 3.058872] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.058872] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.059025] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.072109] mmc0: SDHCI controller on PCI [0000:23:00.1] using DMA [ 3.072140] sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30) [ 3.072213] sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface. [ 3.074136] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003d [ 3.074138] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3.074139] usb 1-1.1: SerialNumber: 00b018c28d8e [ 3.088883] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e1 [ 3.088884] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.088885] usb 2-1.6: Product: BCM20702A0 [ 3.088886] usb 2-1.6: Manufacturer: Broadcom Corp [ 3.088887] usb 2-1.6: SerialNumber: F4B7E2FC55AD [ 3.144081] firewire_ohci 0000:23:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 [ 3.153079] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 3.156038] usb 1-1.3: new high-speed USB device number 4 using ehci-pci [ 3.243870] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:46:a0:3b:81:e2 [ 3.243871] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.243923] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 3.243943] ahci 0000:00:1f.2: version 3.0 [ 3.244168] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 3.244492] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 3.254296] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode [ 3.254301] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 3.292381] clocksource: Switched to clocksource tsc [ 3.300501] scsi host0: ahci [ 3.300645] scsi host1: ahci [ 3.300785] scsi host2: ahci [ 3.300901] scsi host3: ahci [ 3.300973] scsi host4: ahci [ 3.301033] scsi host5: ahci [ 3.301061] ata1: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737100 irq 30 [ 3.301063] ata2: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737180 irq 30 [ 3.301063] ata3: DUMMY [ 3.301066] ata4: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737280 irq 30 [ 3.301067] ata5: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737300 irq 30 [ 3.301068] ata6: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737380 irq 30 [ 3.301384] [drm] Memory usable by graphics device = 2048M [ 3.301386] checking generic (c0000000 410000) vs hw (c0000000 10000000) [ 3.301387] fb: switching to inteldrmfb from VESA VGA [ 3.301411] Console: switching to colour dummy device 80x25 [ 3.301458] [drm] Replacing VGA console driver [ 3.307517] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.307518] [drm] Driver supports precise vblank timestamp query. [ 3.310462] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.313679] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b230 [ 3.313682] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 3.313684] usb 1-1.3: Product: HP HD Webcam [Fixed] [ 3.313687] usb 1-1.3: Manufacturer: Chicony Electronics Co., Ltd. [ 3.313688] usb 1-1.3: SerialNumber: SN0001 [ 3.352142] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 [ 3.353154] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.353370] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9 [ 3.420052] fbcon: inteldrmfb (fb0) is primary device [ 3.420114] Console: switching to colour frame buffer device 170x48 [ 3.420133] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.615184] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.616464] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 3.657033] ata1.00: ATA-8: TOSHIBA MQ01ABD050V, AX0U1Q, max UDMA/100 [ 3.657037] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.658710] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 3.659545] ata1.00: configured for UDMA/100 [ 3.660961] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 1Q PQ: 0 ANSI: 5 [ 3.676221] firewire_core 0000:23:00.0: created device fw0: GUID ffe473fffffffffe, S400 [ 3.692362] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.692369] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.692371] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.692386] sd 0:0:0:0: [sda] Write Protect is off [ 3.692388] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.692420] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.827243] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 3.827745] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.007225] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.011588] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 4.011597] ata2.00: ATAPI: hp DVD-ROM DT80N, R1D1, max UDMA/100 [ 4.017913] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 4.017926] ata2.00: configured for UDMA/100 [ 4.023882] scsi 1:0:0:0: CD-ROM hp DVD-ROM DT80N R1D1 PQ: 0 ANSI: 5 [ 4.051771] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 4.051773] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.052025] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.052171] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.222003] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8 [ 4.366995] ata4: SATA link down (SStatus 0 SControl 300) [ 4.683365] ata5: SATA link down (SStatus 0 SControl 300) [ 4.998551] ata6: SATA link down (SStatus 0 SControl 300) [ 5.031043] psmouse serio4: synaptics: queried max coordinates: x [..5728], y [..4916] [ 5.099763] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400/0x0, board id: 1623, fw id: 790122 [ 5.143673] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 [ 6.241473] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 6.924938] random: crng init done [ 7.598899] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 7.599005] systemd[1]: Detected architecture x86-64. [ 7.606851] systemd[1]: Set hostname to . [ 9.376529] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.376565] systemd[1]: Reached target Remote File Systems (Pre). [ 9.376571] systemd[1]: Reached target Remote File Systems. [ 9.376648] systemd[1]: Created slice System Slice. [ 9.376701] systemd[1]: Listening on Journal Socket. [ 9.377036] systemd[1]: Mounting POSIX Message Queue File System... [ 9.413543] systemd[1]: Starting Load Kernel Modules... [ 10.634586] lp: driver loaded but no devices found [ 10.668135] ppdev: user-space parallel port driver [ 10.707903] parport_pc 00:04: reported by Plug and Play ACPI [ 10.707980] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 10.804275] lp0: using parport0 (interrupt-driven). [ 11.438604] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro [ 12.116770] systemd-journald[265]: Received request to flush runtime journal from PID 1 [ 12.656161] input: HP Wireless hotkeys as /devices/virtual/input/input13 [ 12.985744] hp_accel: hardware type HPB64xx found [ 12.986304] lis3lv02d: 8 bits 3DC sensor found [ 13.032059] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14 [ 13.455455] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247) [ 13.455462] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.455464] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247) [ 13.455468] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.455469] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247) [ 13.455472] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.455472] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247) [ 13.455475] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.455476] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 13.838060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.497593] input: HP WMI hotkeys as /devices/virtual/input/input15 [ 14.588760] Intel(R) Wireless WiFi driver for Linux [ 14.588761] Copyright(c) 2003- 2015 Intel Corporation [ 14.588938] iwlwifi 0000:24:00.0: can't disable ASPM; OS doesn't have ASPM control [ 14.838745] iwlwifi 0000:24:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 14.999610] media: Linux media interface: v0.10 [ 15.032912] Linux video capture interface: v2.00 [ 15.150985] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 15.150986] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 15.150986] RAPL PMU: hw unit of domain package 2^-16 Joules [ 15.150987] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 15.302442] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b230) [ 15.419032] AVX version of gcm_enc/dec engaged. [ 15.419033] AES CTR mode by8 optimization enabled [ 15.435645] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 15.435647] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 15.435647] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 15.435649] iwlwifi 0000:24:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 15.472813] Bluetooth: Core ver 2.22 [ 15.472827] NET: Registered protocol family 31 [ 15.472827] Bluetooth: HCI device and connection manager initialized [ 15.472829] Bluetooth: HCI socket layer initialized [ 15.472831] Bluetooth: L2CAP socket layer initialized [ 15.472834] Bluetooth: SCO socket layer initialized [ 15.537830] uvcvideo 1-1.3:1.0: Entity type for entity Extension 5 was not initialized! [ 15.537832] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 15.537834] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized! [ 15.537843] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 15.537943] input: HP HD Webcam [Fixed]: HP HD Web as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input16 [ 15.538029] usbcore: registered new interface driver uvcvideo [ 15.538029] USB Video Class driver (1.1.1) [ 15.763229] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 15.896284] usbcore: registered new interface driver btusb [ 16.553804] kvm: disabled by bios [ 16.596576] kvm: disabled by bios [ 16.649459] kvm: disabled by bios [ 16.680631] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 17.080540] iwlwifi 0000:24:00.0 wlo1: renamed from wlan0 [ 17.487843] intel_rapl: Found RAPL domain package [ 17.487845] intel_rapl: Found RAPL domain core [ 17.487845] intel_rapl: Found RAPL domain uncore [ 17.672193] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 17.672195] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 17.672197] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 17.672198] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 17.672199] snd_hda_codec_idt hdaudioC0D0: inputs: [ 17.672200] snd_hda_codec_idt hdaudioC0D0: Mic=0xc [ 17.672202] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 [ 17.672203] snd_hda_codec_idt hdaudioC0D0: Line=0xf [ 17.814592] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 17.814655] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 17.814711] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 17.814767] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 17.814822] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 [ 17.814872] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 [ 17.814924] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 [ 17.999269] audit: type=1400 audit(1517907486.526:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=673 comm="apparmor_parser" [ 17.999272] audit: type=1400 audit(1517907486.526:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=673 comm="apparmor_parser" [ 18.067664] audit: type=1400 audit(1517907486.595:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine" pid=675 comm="apparmor_parser" [ 18.067668] audit: type=1400 audit(1517907486.595:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=675 comm="apparmor_parser" [ 18.067671] audit: type=1400 audit(1517907486.595:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//snap_update_ns" pid=675 comm="apparmor_parser" [ 18.115139] audit: type=1400 audit(1517907486.642:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=676 comm="apparmor_parser" [ 18.115143] audit: type=1400 audit(1517907486.642:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=676 comm="apparmor_parser" [ 18.115144] audit: type=1400 audit(1517907486.642:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=676 comm="apparmor_parser" [ 18.115146] audit: type=1400 audit(1517907486.642:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=676 comm="apparmor_parser" [ 18.115148] audit: type=1400 audit(1517907486.642:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=676 comm="apparmor_parser" [ 21.014892] Adding 3998716k swap on /dev/sda5. Priority:-1 extents:1 across:3998716k FS [ 26.597056] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.597057] Bluetooth: BNEP filters: protocol multicast [ 26.597060] Bluetooth: BNEP socket layer initialized [ 30.168613] kauditd_printk_skb: 18 callbacks suppressed [ 30.168614] audit: type=1400 audit(1517907498.695:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine" pid=1080 comm="apparmor_parser" [ 30.196321] audit: type=1400 audit(1517907498.723:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1080 comm="apparmor_parser" [ 30.196427] audit: type=1400 audit(1517907498.723:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/3887/usr/lib/snapd/snap-confine//snap_update_ns" pid=1080 comm="apparmor_parser" [ 30.296667] audit: type=1400 audit(1517907498.824:33): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=1086 comm="apparmor_parser" [ 31.127856] audit: type=1400 audit(1517907499.655:34): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.webstorm.webstorm" pid=1100 comm="apparmor_parser" [ 31.586930] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 31.808321] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 31.840728] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 31.853794] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0 [ 32.153018] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0 [ 32.238686] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 32.759765] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 42.372621] Bluetooth: RFCOMM TTY layer initialized [ 42.372626] Bluetooth: RFCOMM socket layer initialized [ 42.372631] Bluetooth: RFCOMM ver 1.11 [ 50.167999] wlo1: authenticate with 34:ce:00:22:94:e8 [ 50.170810] wlo1: send auth to 34:ce:00:22:94:e8 (try 1/3) [ 50.210457] wlo1: authenticated [ 50.212019] wlo1: associate with 34:ce:00:22:94:e8 (try 1/3) [ 50.251331] wlo1: RX AssocResp from 34:ce:00:22:94:e8 (capab=0xc11 status=0 aid=2) [ 50.266399] wlo1: associated [ 50.266441] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 3373.542842] usb 3-4: new low-speed USB device number 2 using xhci_hcd [ 3373.686511] usb 3-4: New USB device found, idVendor=04ca, idProduct=0061 [ 3373.686516] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3373.686519] usb 3-4: Product: USB Optical Mouse [ 3373.686521] usb 3-4: Manufacturer: PixArt [ 3373.765411] hidraw: raw HID events driver (C) Jiri Kosina [ 3373.774773] usbcore: registered new interface driver usbhid [ 3373.774774] usbhid: USB HID core driver [ 3373.794547] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:04CA:0061.0001/input/input24 [ 3373.851269] hid-generic 0003:04CA:0061.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-4/input0 [ 4045.406034] usb 3-3: new high-speed USB device number 3 using xhci_hcd [ 4045.547979] usb 3-3: New USB device found, idVendor=03f0, idProduct=5a07 [ 4045.547983] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4045.547986] usb 3-3: Product: v220w [ 4045.547988] usb 3-3: Manufacturer: HP [ 4045.547990] usb 3-3: SerialNumber: AD7802E0300000311 [ 4046.901702] usb-storage 3-3:1.0: USB Mass Storage device detected [ 4046.901904] scsi host6: usb-storage 3-3:1.0 [ 4046.902200] usbcore: registered new interface driver usb-storage [ 4046.923609] usbcore: registered new interface driver uas [ 4048.415444] scsi 6:0:0:0: Direct-Access hp v220w 1100 PQ: 0 ANSI: 4 [ 4048.416566] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 4048.416658] sd 6:0:0:0: [sdb] 15950592 512-byte logical blocks: (8.17 GB/7.61 GiB) [ 4048.417152] sd 6:0:0:0: [sdb] Write Protect is off [ 4048.417157] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 4048.417601] sd 6:0:0:0: [sdb] No Caching mode page found [ 4048.417609] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4048.425313] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 4864.047908] usb 3-3: USB disconnect, device number 3