[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-83-generic (buildd@lgw01-29) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #106-Ubuntu SMP Mon Jun 26 17:54:43 UTC 2017 (Ubuntu 4.4.0-83.106-generic 4.4.70) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-83-generic root=UUID=1355d63c-1bd4-40c2-aba4-21bc61c975c4 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] tseg: 00cff00000 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfdf1000-0x00000000cfdfffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-870A-UD3/GA-870A-UD3, BIOS FD 03/09/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back [ 0.000000] 6 base 000220000000 mask FFFFF0000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] reg 5, base: 8GB, range: 512MB, type WB [ 0.000000] reg 6, base: 8704MB, range: 256MB, type WB [ 0.000000] total RAM covered: 3326M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC [ 0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f47c0-0x000f47cf] mapped at [ffff8800000f47c0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE [ 0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE [ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE [ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE [ 0.000000] RAMDISK: [mem 0x336fa000-0x35b74fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6280 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000CFDF1000 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000CFDF1080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000CFDF1100 0079C7 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0x00000000CFDF0000 000040 [ 0.000000] ACPI: SSDT 0x00000000CFDF8BC0 00088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 0x00000000CFDF9480 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000CFDF94C0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS 0x00000000CFDF9500 000034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 0x00000000CFDF9570 0000F2 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 0x00000000CFDF8B00 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22fff9000-0x22fffdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfdeffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff] [ 0.000000] On node 0 totalpages: 2096526 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13240 pages used for memmap [ 0.000000] DMA32 zone: 847344 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1245184 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfdf0000-0xcfdf0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfdf1000-0xcfdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88022fc00000 s98264 r8192 d28712 u262144 [ 0.000000] pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063745 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-83-generic root=UUID=1355d63c-1bd4-40c2-aba4-21bc61c975c4 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB) [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.000000] Memory: 8066168K/8386104K available (8469K kernel code, 1294K rwdata, 3984K rodata, 1488K init, 1316K bss, 319936K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:488 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3214.569 MHz processor [ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.13 BogoMIPS (lpj=12858276) [ 0.000030] pid_max: default: 32768 minimum: 301 [ 0.000035] ACPI: Core revision 20150930 [ 0.002670] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.002690] Security Framework initialized [ 0.002692] Yama: becoming mindful. [ 0.002709] AppArmor: AppArmor initialized [ 0.003117] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.005170] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.006089] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006098] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006324] Initializing cgroup subsys io [ 0.006328] Initializing cgroup subsys memory [ 0.006335] Initializing cgroup subsys devices [ 0.006338] Initializing cgroup subsys freezer [ 0.006340] Initializing cgroup subsys net_cls [ 0.006343] Initializing cgroup subsys perf_event [ 0.006345] Initializing cgroup subsys net_prio [ 0.006348] Initializing cgroup subsys hugetlb [ 0.006350] Initializing cgroup subsys pids [ 0.006368] CPU: Physical Processor ID: 0 [ 0.006369] CPU: Processor Core ID: 0 [ 0.006370] mce: CPU supports 6 MCE banks [ 0.006375] LVT offset 0 assigned for vector 0xf9 [ 0.006378] process: using AMD E400 aware idle routine [ 0.006380] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.006381] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.006587] Freeing SMP alternatives memory: 32K (ffffffff820b9000 - ffffffff820c1000) [ 0.041265] ftrace: allocating 32129 entries in 126 pages [ 0.854348] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.854351] smpboot: Max logical packages: 2 [ 0.854830] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.000922] smpboot: CPU0: AMD Phenom(tm) II X4 840 Processor (family: 0x10, model: 0x5, stepping: 0x3) [ 1.000938] Performance Events: AMD PMU driver. [ 1.000941] ... version: 0 [ 1.000942] ... bit width: 48 [ 1.000943] ... generic registers: 4 [ 1.000944] ... value mask: 0000ffffffffffff [ 1.000945] ... max period: 00007fffffffffff [ 1.000946] ... fixed-purpose events: 0 [ 1.000947] ... event mask: 000000000000000f [ 1.001561] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 1.001633] x86: Booting SMP configuration: [ 1.001635] .... node #0, CPUs: #1 [ 1.003784] process: System has AMD C1E enabled [ 1.003792] #2 [ 1.003801] process: Switch to broadcast mode on CPU1 [ 1.005941] process: Switch to broadcast mode on CPU2 [ 1.005944] #3 [ 1.008049] x86: Booted up 1 node, 4 CPUs [ 1.008051] smpboot: Total of 4 processors activated (25716.55 BogoMIPS) [ 1.008100] process: Switch to broadcast mode on CPU3 [ 1.008640] process: Switch to broadcast mode on CPU0 [ 1.008790] devtmpfs: initialized [ 1.011912] evm: security.selinux [ 1.011913] evm: security.SMACK64 [ 1.011914] evm: security.SMACK64EXEC [ 1.011915] evm: security.SMACK64TRANSMUTE [ 1.011916] evm: security.SMACK64MMAP [ 1.011916] evm: security.ima [ 1.011917] evm: security.capability [ 1.012073] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf0fff] (4096 bytes) [ 1.012168] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.012180] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.012306] pinctrl core: initialized pinctrl subsystem [ 1.012411] RTC time: 22:58:42, date: 07/17/17 [ 1.012537] NET: Registered protocol family 16 [ 1.027883] cpuidle: using governor ladder [ 1.043875] cpuidle: using governor menu [ 1.043883] PCCT header not found. [ 1.043889] node 0 link 0: io port [9000, ffff] [ 1.043891] TOM: 00000000d0000000 aka 3328M [ 1.043893] Fam 10h mmconf [mem 0xe0000000-0xe00fffff] [ 1.043895] node 0 link 0: mmio [a0000, bffff] [ 1.043897] node 0 link 0: mmio [d0000000, dfffffff] [ 1.043898] node 0 link 0: mmio [f0000000, fe02ffff] [ 1.043900] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff] [ 1.043901] TOM2: 0000000230000000 aka 8960M [ 1.043903] bus: [bus 00-06] on node 0 link 0 [ 1.043904] bus: 00 [io 0x0000-0xffff] [ 1.043905] bus: 00 [mem 0x000a0000-0x000bffff] [ 1.043906] bus: 00 [mem 0xd0000000-0xdfffffff] [ 1.043907] bus: 00 [mem 0xe0700000-0xffffffff] [ 1.043908] bus: 00 [mem 0xe0100000-0xe06fffff] [ 1.043909] bus: 00 [mem 0x230000000-0xfcffffffff] [ 1.044005] ACPI: bus type PCI registered [ 1.044008] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.044082] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.044084] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 1.044097] PCI: Using configuration type 1 for base access [ 1.056597] ACPI: Added _OSI(Module Device) [ 1.056601] ACPI: Added _OSI(Processor Device) [ 1.056602] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.056603] ACPI: Added _OSI(Processor Aggregator Device) [ 1.066057] ACPI: Interpreter enabled [ 1.066074] ACPI: (supports S0 S3 S4 S5) [ 1.066076] ACPI: Using IOAPIC for interrupt routing [ 1.066100] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.069509] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.069515] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.069519] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.069714] PCI host bridge to bus 0000:00 [ 1.069717] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.069718] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.069720] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.069722] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 1.069723] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] [ 1.069725] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.069733] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000 [ 1.069746] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.069820] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 [ 1.069849] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 1.069887] pci 0000:00:02.0: System wakeup disabled by ACPI [ 1.069921] pci 0000:00:09.0: [1002:597e] type 01 class 0x060400 [ 1.069948] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.069983] pci 0000:00:09.0: System wakeup disabled by ACPI [ 1.070012] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400 [ 1.070039] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.070074] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 1.070112] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 1.070134] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 1.070142] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 1.070151] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 1.070158] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 1.070166] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 1.070175] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff] [ 1.070193] pci 0000:00:11.0: set SATA to AHCI mode [ 1.070268] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 1.070281] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff] [ 1.070360] pci 0000:00:12.0: System wakeup disabled by ACPI [ 1.070393] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 1.070414] pci 0000:00:12.2: reg 0x10: [mem 0xfe02d000-0xfe02d0ff] [ 1.070474] pci 0000:00:12.2: supports D1 D2 [ 1.070476] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.070512] pci 0000:00:12.2: System wakeup disabled by ACPI [ 1.070545] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 1.070559] pci 0000:00:13.0: reg 0x10: [mem 0xfe02c000-0xfe02cfff] [ 1.070638] pci 0000:00:13.0: System wakeup disabled by ACPI [ 1.070671] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 1.070693] pci 0000:00:13.2: reg 0x10: [mem 0xfe02b000-0xfe02b0ff] [ 1.070752] pci 0000:00:13.2: supports D1 D2 [ 1.070754] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.070791] pci 0000:00:13.2: System wakeup disabled by ACPI [ 1.070825] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 1.070936] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 1.070949] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 1.070957] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 1.070965] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 1.070973] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 1.070981] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f] [ 1.070998] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.071000] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.071001] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.071003] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.071065] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 1.071087] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit] [ 1.071138] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 1.071173] pci 0000:00:14.2: System wakeup disabled by ACPI [ 1.071203] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 1.071317] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 1.071378] pci 0000:00:14.4: System wakeup disabled by ACPI [ 1.071407] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 1.071421] pci 0000:00:14.5: reg 0x10: [mem 0xfe02a000-0xfe02afff] [ 1.071499] pci 0000:00:14.5: System wakeup disabled by ACPI [ 1.071533] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 1.071595] pci 0000:00:15.0: supports D1 D2 [ 1.071633] pci 0000:00:15.0: System wakeup disabled by ACPI [ 1.071666] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 1.071727] pci 0000:00:15.1: supports D1 D2 [ 1.071766] pci 0000:00:15.1: System wakeup disabled by ACPI [ 1.071801] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 1.071837] pci 0000:00:16.0: reg 0x10: [mem 0xfe029000-0xfe029fff] [ 1.071916] pci 0000:00:16.0: System wakeup disabled by ACPI [ 1.071950] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 1.071972] pci 0000:00:16.2: reg 0x10: [mem 0xfe028000-0xfe0280ff] [ 1.072031] pci 0000:00:16.2: supports D1 D2 [ 1.072033] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 1.072069] pci 0000:00:16.2: System wakeup disabled by ACPI [ 1.072102] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 1.072160] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 1.072217] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 1.072272] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 1.072329] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 1.072423] pci 0000:01:00.0: [1002:68b8] type 00 class 0x030000 [ 1.072442] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.072451] pci 0000:01:00.0: reg 0x18: [mem 0xfdec0000-0xfdedffff 64bit] [ 1.072457] pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff] [ 1.072467] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 1.072489] pci 0000:01:00.0: supports D1 D2 [ 1.072527] pci 0000:01:00.1: [1002:aa58] type 00 class 0x040300 [ 1.072547] pci 0000:01:00.1: reg 0x10: [mem 0xfdefc000-0xfdefffff 64bit] [ 1.072589] pci 0000:01:00.1: supports D1 D2 [ 1.079893] pci 0000:00:02.0: PCI bridge to [bus 01] [ 1.079899] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 1.079901] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff] [ 1.079904] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.079971] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 1.079998] pci 0000:02:00.0: reg 0x10: [mem 0xfdbfe000-0xfdbfffff 64bit] [ 1.080066] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.087893] pci 0000:00:09.0: PCI bridge to [bus 02] [ 1.087898] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.087900] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 1.087903] pci 0000:00:09.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 1.087969] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185 [ 1.088044] pci 0000:03:00.0: reg 0x24: [mem 0xfd5fe000-0xfd5fffff] [ 1.088091] pci 0000:03:00.0: PME# supported from D3hot [ 1.088142] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185 [ 1.088163] pci 0000:03:00.1: reg 0x10: [io 0xcf00-0xcf07] [ 1.088170] pci 0000:03:00.1: reg 0x14: [io 0xce00-0xce03] [ 1.088177] pci 0000:03:00.1: reg 0x18: [io 0xcd00-0xcd07] [ 1.088185] pci 0000:03:00.1: reg 0x1c: [io 0xcc00-0xcc03] [ 1.088192] pci 0000:03:00.1: reg 0x20: [io 0xcb00-0xcb0f] [ 1.088260] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.088266] pci 0000:00:0a.0: PCI bridge to [bus 03] [ 1.088269] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 1.088271] pci 0000:00:0a.0: bridge window [mem 0xfd500000-0xfd5fffff] [ 1.088274] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.088323] pci 0000:04:0e.0: [104c:8024] type 00 class 0x0c0010 [ 1.088350] pci 0000:04:0e.0: reg 0x10: [mem 0xfddff000-0xfddff7ff] [ 1.088361] pci 0000:04:0e.0: reg 0x14: [mem 0xfddf8000-0xfddfbfff] [ 1.088435] pci 0000:04:0e.0: supports D1 D2 [ 1.088437] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot [ 1.088492] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 1.088496] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 1.088499] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 1.088502] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] [ 1.088505] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 1.088506] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.088508] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.088509] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 1.088511] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode) [ 1.088565] pci 0000:05:00.0: [197b:2363] type 00 class 0x010185 [ 1.088669] pci 0000:05:00.0: reg 0x24: [mem 0xfdafe000-0xfdafffff] [ 1.088722] pci 0000:05:00.0: PME# supported from D3hot [ 1.088775] pci 0000:05:00.1: [197b:2363] type 00 class 0x010185 [ 1.088803] pci 0000:05:00.1: reg 0x10: [io 0xaf00-0xaf07] [ 1.088813] pci 0000:05:00.1: reg 0x14: [io 0xae00-0xae03] [ 1.088823] pci 0000:05:00.1: reg 0x18: [io 0xad00-0xad07] [ 1.088832] pci 0000:05:00.1: reg 0x1c: [io 0xac00-0xac03] [ 1.088842] pci 0000:05:00.1: reg 0x20: [io 0xab00-0xab0f] [ 1.088926] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.088934] pci 0000:00:15.0: PCI bridge to [bus 05] [ 1.088939] pci 0000:00:15.0: bridge window [io 0xa000-0xafff] [ 1.088942] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff] [ 1.088946] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 1.089003] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000 [ 1.089042] pci 0000:06:00.0: reg 0x10: [io 0x9e00-0x9eff] [ 1.089069] pci 0000:06:00.0: reg 0x18: [mem 0xfd7ff000-0xfd7fffff 64bit pref] [ 1.089087] pci 0000:06:00.0: reg 0x20: [mem 0xfd7f8000-0xfd7fbfff 64bit pref] [ 1.089155] pci 0000:06:00.0: supports D1 D2 [ 1.089157] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.095898] pci 0000:00:15.1: PCI bridge to [bus 06] [ 1.095906] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff] [ 1.095909] pci 0000:00:15.1: bridge window [mem 0xfd800000-0xfd8fffff] [ 1.095914] pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref] [ 1.096148] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 [ 1.096184] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 [ 1.096217] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 [ 1.096249] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 [ 1.096281] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 [ 1.096313] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 [ 1.096345] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 [ 1.096376] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 [ 1.096950] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 1.096952] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.096955] vgaarb: loaded [ 1.096957] vgaarb: bridge control possible 0000:01:00.0 [ 1.097160] SCSI subsystem initialized [ 1.097239] libata version 3.00 loaded. [ 1.097259] ACPI: bus type USB registered [ 1.097274] usbcore: registered new interface driver usbfs [ 1.097282] usbcore: registered new interface driver hub [ 1.097304] usbcore: registered new device driver usb [ 1.097486] PCI: Using ACPI for IRQ routing [ 1.104775] PCI: pci_cache_line_size set to 64 bytes [ 1.104848] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 1.104849] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff] [ 1.104952] NetLabel: Initializing [ 1.104953] NetLabel: domain hash size = 128 [ 1.104954] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.104965] NetLabel: unlabeled traffic allowed by default [ 1.105064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.105067] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.107133] clocksource: Switched to clocksource hpet [ 1.112877] AppArmor: AppArmor Filesystem Enabled [ 1.112940] pnp: PnP ACPI init [ 1.113044] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 1.113046] system 00:00: [io 0x0220-0x0225] has been reserved [ 1.113048] system 00:00: [io 0x0290-0x0294] has been reserved [ 1.113052] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.113258] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 1.113287] system 00:01: [io 0x4100-0x411f] has been reserved [ 1.113289] system 00:01: [io 0x0228-0x022f] has been reserved [ 1.113290] system 00:01: [io 0x040b] has been reserved [ 1.113292] system 00:01: [io 0x04d6] has been reserved [ 1.113294] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 1.113295] system 00:01: [io 0x0c14] has been reserved [ 1.113297] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 1.113298] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 1.113300] system 00:01: [io 0x0c6f] has been reserved [ 1.113301] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 1.113303] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 1.113305] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 1.113306] system 00:01: [io 0x4000-0x40fe] could not be reserved [ 1.113308] system 00:01: [io 0x4210-0x4217] has been reserved [ 1.113310] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 1.113311] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 1.113313] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 1.113315] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 1.113317] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.113428] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.113652] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.113811] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.113918] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 1.113920] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.114028] system 00:06: [mem 0x000f0000-0x000f3fff] could not be reserved [ 1.114030] system 00:06: [mem 0x000f4000-0x000f7fff] could not be reserved [ 1.114031] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved [ 1.114033] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved [ 1.114035] system 00:06: [mem 0xcfdf0000-0xcfdfffff] could not be reserved [ 1.114036] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved [ 1.114038] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.114040] system 00:06: [mem 0x00100000-0xcfdeffff] could not be reserved [ 1.114042] system 00:06: [mem 0xcfe00000-0xcfefffff] has been reserved [ 1.114043] system 00:06: [mem 0xcff00000-0xcfffffff] could not be reserved [ 1.114045] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.114047] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved [ 1.114048] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved [ 1.114051] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.114064] pnp: PnP ACPI: found 7 devices [ 1.120845] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.120887] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref] [ 1.120890] pci 0000:00:02.0: PCI bridge to [bus 01] [ 1.120892] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 1.120895] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff] [ 1.120897] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.120900] pci 0000:00:09.0: PCI bridge to [bus 02] [ 1.120901] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.120904] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 1.120906] pci 0000:00:09.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 1.120909] pci 0000:00:0a.0: PCI bridge to [bus 03] [ 1.120911] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 1.120913] pci 0000:00:0a.0: bridge window [mem 0xfd500000-0xfd5fffff] [ 1.120915] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.120919] pci 0000:00:14.4: PCI bridge to [bus 04] [ 1.120921] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 1.120925] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 1.120928] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] [ 1.120934] pci 0000:00:15.0: PCI bridge to [bus 05] [ 1.120936] pci 0000:00:15.0: bridge window [io 0xa000-0xafff] [ 1.120940] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff] [ 1.120943] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 1.120948] pci 0000:00:15.1: PCI bridge to [bus 06] [ 1.120950] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff] [ 1.120954] pci 0000:00:15.1: bridge window [mem 0xfd800000-0xfd8fffff] [ 1.120957] pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref] [ 1.120963] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.120964] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.120966] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.120968] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 1.120969] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff window] [ 1.120971] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 1.120972] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff] [ 1.120974] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.120976] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 1.120977] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 1.120979] pci_bus 0000:02: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref] [ 1.120980] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 1.120982] pci_bus 0000:03: resource 1 [mem 0xfd500000-0xfd5fffff] [ 1.120983] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.120985] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 1.120987] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff] [ 1.120988] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff pref] [ 1.120990] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 1.120991] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 1.120993] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.120994] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window] [ 1.120996] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff window] [ 1.120997] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] [ 1.120999] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff] [ 1.121000] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] [ 1.121002] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff] [ 1.121004] pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff] [ 1.121005] pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref] [ 1.121041] NET: Registered protocol family 2 [ 1.121211] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.121367] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.121594] TCP: Hash tables configured (established 65536 bind 65536) [ 1.121639] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.121682] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.121778] NET: Registered protocol family 1 [ 1.407580] pci 0000:01:00.0: Video device with shadowed ROM [ 1.407699] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 1.407703] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 1.407708] pci 0000:05:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 1.407712] pci 0000:05:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 1.407718] PCI: CLS 64 bytes, default 64 [ 1.407770] Unpacking initramfs... [ 1.905057] Freeing initrd memory: 37356K (ffff8800336fa000 - ffff880035b75000) [ 1.905315] PCI-DMA: Disabling AGP. [ 1.905402] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.905403] PCI-DMA: using GART IOMMU. [ 1.905405] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.907699] LVT offset 1 assigned for vector 0x400 [ 1.907710] IBS: LVT offset 1 assigned [ 1.907749] perf: AMD IBS detected (0x0000001f) [ 1.907834] Scanning for low memory corruption every 60 seconds [ 1.908190] audit: initializing netlink subsys (disabled) [ 1.908206] audit: type=2000 audit(1500332321.964:1): initialized [ 1.908466] Initialise system trusted keyring [ 1.908722] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 1.908724] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.909969] zbud: loaded [ 1.910254] VFS: Disk quotas dquot_6.6.0 [ 1.910289] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.910522] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.910827] fuse init (API version 7.23) [ 1.910987] Key type big_key registered [ 1.911006] Allocating IMA MOK and blacklist keyrings. [ 1.912217] Key type asymmetric registered [ 1.912222] Asymmetric key parser 'x509' registered [ 1.912281] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.912344] io scheduler noop registered [ 1.912346] io scheduler deadline registered (default) [ 1.912375] io scheduler cfq registered [ 1.913008] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.913015] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.913042] vesafb: mode is 1400x1050x32, linelength=5632, pages=0 [ 1.913043] vesafb: scrolling: redraw [ 1.913045] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.913059] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 5824k, total 5824k [ 1.913185] Console: switching to colour frame buffer device 175x65 [ 1.913205] fb0: VESA VGA frame buffer device [ 1.913273] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.913276] ACPI: Power Button [PWRB] [ 1.913312] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.913313] ACPI: Power Button [PWRF] [ 1.913335] ACPI: processor limited to max C-state 1 [ 1.913544] GHES: HEST is not enabled! [ 1.913655] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.934074] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.935624] Linux agpgart interface v0.103 [ 1.937607] loop: module loaded [ 1.937841] libphy: Fixed MDIO Bus: probed [ 1.937844] tun: Universal TUN/TAP device driver, 1.6 [ 1.937845] tun: (C) 1999-2004 Max Krasnyansky [ 1.937918] PPP generic driver version 2.4.2 [ 1.937976] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.937980] ehci-pci: EHCI PCI platform driver [ 1.938103] QUIRK: Enable AMD PLL fix [ 1.938124] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.938130] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.938133] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.938142] ehci-pci 0000:00:12.2: debug port 1 [ 1.938183] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02d000 [ 1.947258] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.947307] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.947309] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.947311] usb usb1: Product: EHCI Host Controller [ 1.947312] usb usb1: Manufacturer: Linux 4.4.0-83-generic ehci_hcd [ 1.947313] usb usb1: SerialNumber: 0000:00:12.2 [ 1.947458] hub 1-0:1.0: USB hub found [ 1.947463] hub 1-0:1.0: 5 ports detected [ 1.947698] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.947704] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.947707] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.947715] ehci-pci 0000:00:13.2: debug port 1 [ 1.947744] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe02b000 [ 1.959257] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.959312] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.959314] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.959315] usb usb2: Product: EHCI Host Controller [ 1.959316] usb usb2: Manufacturer: Linux 4.4.0-83-generic ehci_hcd [ 1.959318] usb usb2: SerialNumber: 0000:00:13.2 [ 1.959457] hub 2-0:1.0: USB hub found [ 1.959462] hub 2-0:1.0: 5 ports detected [ 1.959698] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.959703] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.959706] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.959715] ehci-pci 0000:00:16.2: debug port 1 [ 1.959744] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe028000 [ 1.971264] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.971326] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.971328] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.971329] usb usb3: Product: EHCI Host Controller [ 1.971330] usb usb3: Manufacturer: Linux 4.4.0-83-generic ehci_hcd [ 1.971332] usb usb3: SerialNumber: 0000:00:16.2 [ 1.971470] hub 3-0:1.0: USB hub found [ 1.971475] hub 3-0:1.0: 4 ports detected [ 1.971584] ehci-platform: EHCI generic platform driver [ 1.971600] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.971603] ohci-pci: OHCI PCI platform driver [ 1.971731] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.971736] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.971766] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe02e000 [ 2.031340] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.031344] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.031345] usb usb4: Product: OHCI PCI host controller [ 2.031347] usb usb4: Manufacturer: Linux 4.4.0-83-generic ohci_hcd [ 2.031348] usb usb4: SerialNumber: 0000:00:12.0 [ 2.031534] hub 4-0:1.0: USB hub found [ 2.031543] hub 4-0:1.0: 5 ports detected [ 2.031775] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.031780] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.031802] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02c000 [ 2.091282] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.091285] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.091287] usb usb5: Product: OHCI PCI host controller [ 2.091288] usb usb5: Manufacturer: Linux 4.4.0-83-generic ohci_hcd [ 2.091289] usb usb5: SerialNumber: 0000:00:13.0 [ 2.091438] hub 5-0:1.0: USB hub found [ 2.091445] hub 5-0:1.0: 5 ports detected [ 2.091680] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.091685] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 2.091707] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe02a000 [ 2.151282] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.151285] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.151287] usb usb6: Product: OHCI PCI host controller [ 2.151288] usb usb6: Manufacturer: Linux 4.4.0-83-generic ohci_hcd [ 2.151289] usb usb6: SerialNumber: 0000:00:14.5 [ 2.151467] hub 6-0:1.0: USB hub found [ 2.151474] hub 6-0:1.0: 2 ports detected [ 2.151676] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.151680] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 2.151703] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe029000 [ 2.211286] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.211290] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.211291] usb usb7: Product: OHCI PCI host controller [ 2.211292] usb usb7: Manufacturer: Linux 4.4.0-83-generic ohci_hcd [ 2.211294] usb usb7: SerialNumber: 0000:00:16.0 [ 2.211440] hub 7-0:1.0: USB hub found [ 2.211447] hub 7-0:1.0: 4 ports detected [ 2.211561] ohci-platform: OHCI generic platform driver [ 2.211574] uhci_hcd: USB Universal Host Controller Interface driver [ 2.211667] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.211671] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 2.211780] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 2.211902] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.211904] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.211905] usb usb8: Product: xHCI Host Controller [ 2.211906] usb usb8: Manufacturer: Linux 4.4.0-83-generic xhci-hcd [ 2.211908] usb usb8: SerialNumber: 0000:02:00.0 [ 2.212030] hub 8-0:1.0: USB hub found [ 2.212037] hub 8-0:1.0: 2 ports detected [ 2.212110] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.212113] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 2.215236] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.215248] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.215250] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.215251] usb usb9: Product: xHCI Host Controller [ 2.215252] usb usb9: Manufacturer: Linux 4.4.0-83-generic xhci-hcd [ 2.215254] usb usb9: SerialNumber: 0000:02:00.0 [ 2.215364] hub 9-0:1.0: USB hub found [ 2.215370] hub 9-0:1.0: 2 ports detected [ 2.215473] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.248837] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 2.248838] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 2.283265] usb 3-2: new high-speed USB device number 2 using ehci-pci [ 2.499366] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.499535] mousedev: PS/2 mouse device common for all mice [ 2.499714] rtc_cmos 00:02: RTC can wake from S4 [ 2.499844] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.499874] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.499880] i2c /dev entries driver [ 2.499937] device-mapper: uevent: version 1.0.3 [ 2.500036] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.500057] ledtrig-cpu: registered to indicate activity on CPUs [ 2.500647] NET: Registered protocol family 10 [ 2.500830] NET: Registered protocol family 17 [ 2.500839] Key type dns_resolver registered [ 2.501078] microcode: CPU0: patch_level=0x010000c8 [ 2.501094] microcode: CPU1: patch_level=0x010000c8 [ 2.501113] microcode: CPU2: patch_level=0x010000c8 [ 2.501132] microcode: CPU3: patch_level=0x010000c8 [ 2.501194] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 2.501373] registered taskstats version 1 [ 2.501386] Loading compiled-in X.509 certificates [ 2.502278] Loaded X.509 cert 'Build time autogenerated kernel key: 35105354eb779045e4d9ad793dead39d5ee93f76' [ 2.502298] zswap: loaded using pool lzo/zbud [ 2.504468] Key type trusted registered [ 2.508620] Key type encrypted registered [ 2.508631] AppArmor: AppArmor sha1 policy hashing enabled [ 2.508634] ima: No TPM chip found, activating TPM-bypass! [ 2.508659] evm: HMAC attrs: 0x1 [ 2.509095] Magic number: 9:62:1008 [ 2.509106] usb usb7-port1: hash matches [ 2.509161] memory memory47: hash matches [ 2.509221] rtc_cmos 00:02: setting system clock to 2017-07-17 22:58:43 UTC (1500332323) [ 2.509399] acpi-cpufreq: overriding BIOS provided _PSD data [ 2.509532] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.509533] EDD information not available. [ 2.509578] PM: Hibernation image not present or could not be loaded. [ 2.510867] Freeing unused kernel memory: 1488K (ffffffff81f45000 - ffffffff820b9000) [ 2.510870] Write protecting the kernel read-only data: 14336k [ 2.511584] Freeing unused kernel memory: 1760K (ffff880001848000 - ffff880001a00000) [ 2.511899] Freeing unused kernel memory: 112K (ffff880001de4000 - ffff880001e00000) [ 2.525721] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 2.525794] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 2.525808] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 2.525822] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 2.526634] random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 2.526681] random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 2.526914] random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 2.526960] random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 2.527004] random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 2.527048] random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available) [ 2.553058] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 2.557185] wmi: Mapper loaded [ 2.560898] ahci 0000:00:11.0: version 3.0 [ 2.561116] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.561119] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.561733] scsi host0: ahci [ 2.561966] scsi host1: ahci [ 2.562137] scsi host2: ahci [ 2.562330] scsi host3: ahci [ 2.562404] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 19 [ 2.562406] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 19 [ 2.562409] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 19 [ 2.562411] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 19 [ 2.562686] [drm] Initialized drm 1.1.0 20060810 [ 2.567127] scsi host4: pata_atiixp [ 2.567311] scsi host5: pata_atiixp [ 2.567379] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 2.567381] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 2.575290] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.575295] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.577706] scsi host6: ahci [ 2.577819] scsi host7: ahci [ 2.577865] ata7: SATA max UDMA/133 abar m8192@0xfd5fe000 port 0xfd5fe100 irq 18 [ 2.577868] ata8: SATA max UDMA/133 abar m8192@0xfd5fe000 port 0xfd5fe180 irq 18 [ 2.577997] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 2.578331] scsi host8: pata_jmicron [ 2.578393] scsi host9: pata_jmicron [ 2.578426] ata9: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 19 [ 2.578427] ata10: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 19 [ 2.579922] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.579934] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.580454] r8169 0000:06:00.0 eth0: RTL8168e/8111e at 0xffffc90000ece000, 1c:6f:65:ac:0e:68, XID 0c200000 IRQ 32 [ 2.580457] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.591379] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.591383] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.591751] scsi host10: ahci [ 2.592470] [drm] radeon kernel modesetting enabled. [ 2.592541] scsi host11: ahci [ 2.592621] ata11: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 17 [ 2.592625] ata12: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 17 [ 2.592674] pata_jmicron 0000:05:00.1: enabling device (0000 -> 0001) [ 2.593203] scsi host12: pata_jmicron [ 2.593379] scsi host13: pata_jmicron [ 2.593447] ata13: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17 [ 2.593449] ata14: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17 [ 2.594798] AMD IOMMUv2 driver by Joerg Roedel [ 2.594802] AMD IOMMUv2 functionality not available on this system [ 2.597705] CRAT table not found [ 2.597708] Finished initializing topology ret=0 [ 2.597902] kfd kfd: Initialized module [ 2.598231] checking generic (d0000000 5b0000) vs hw (d0000000 10000000) [ 2.598234] fb: switching to radeondrmfb from VESA VGA [ 2.598264] Console: switching to colour dummy device 80x25 [ 2.598616] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x1462:0x2140). [ 2.598628] [drm] register mmio base: 0xFDEC0000 [ 2.598629] [drm] register mmio size: 131072 [ 2.598939] ATOM BIOS: 113 [ 2.599001] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 2.599003] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 2.599004] [drm] Detected VRAM RAM=1024M, BAR=256M [ 2.599005] [drm] RAM width 128bits DDR [ 2.599111] [TTM] Zone kernel: Available graphics memory: 4086434 kiB [ 2.599114] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 2.599115] [TTM] Initializing pool allocator [ 2.599122] [TTM] Initializing DMA pool allocator [ 2.599146] [drm] radeon: 1024M of VRAM memory ready [ 2.599147] [drm] radeon: 1024M of GTT memory ready. [ 2.599163] [drm] Loading JUNIPER Microcode [ 2.599263] [drm] Internal thermal controller with fan control [ 2.635327] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 2.636649] [drm] radeon: dpm initialized [ 2.636740] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.638001] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 2.642689] r8169 0000:06:00.0 eth1: renamed from eth0 [ 2.654662] [drm] PCIE GART of 1024M enabled (table at 0x000000000025E000). [ 2.654752] radeon 0000:01:00.0: WB enabled [ 2.654755] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880220d22c00 [ 2.654757] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880220d22c0c [ 2.655526] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000101c418 [ 2.655529] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.655529] [drm] Driver supports precise vblank timestamp query. [ 2.655531] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 2.655564] radeon 0000:01:00.0: radeon: using MSI. [ 2.655588] [drm] radeon: irq initialized. [ 2.671643] usb 3-2: New USB device found, idVendor=046d, idProduct=081b [ 2.671645] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 2.671647] usb 3-2: SerialNumber: F01568E0 [ 2.671661] [drm] ring test on 0 succeeded in 1 usecs [ 2.671669] [drm] ring test on 3 succeeded in 2 usecs [ 2.799279] usb 3-3: new high-speed USB device number 3 using ehci-pci [ 2.867298] [drm] ring test on 5 succeeded in 1 usecs [ 2.867304] [drm] UVD initialized successfully. [ 2.867431] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.867456] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.895304] ata8: SATA link down (SStatus 0 SControl 300) [ 2.895340] ata7: SATA link down (SStatus 0 SControl 300) [ 2.915300] ata12: SATA link down (SStatus 0 SControl 300) [ 2.919305] ata11: SATA link down (SStatus 0 SControl 300) [ 3.037250] tsc: Refined TSC clocksource calibration: 3214.717 MHz [ 3.037253] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e5698be4da, max_idle_ns: 440795301301 ns [ 3.051330] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.053552] ata1.00: HPA detected: current 976764911, native 976773168 [ 3.053651] ata1.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133 [ 3.053655] ata1.00: 976764911 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.055278] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.055306] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.055328] ata1.00: configured for UDMA/133 [ 3.055565] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5 [ 3.055987] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.055993] sd 0:0:0:0: [sda] 976764911 512-byte logical blocks: (500 GB/466 GiB) [ 3.056032] sd 0:0:0:0: [sda] Write Protect is off [ 3.056034] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.056050] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.056946] ata4.00: ATAPI: Optiarc DVD RW AD-7261S, 1.03, max UDMA/100 [ 3.057769] ata2.00: ATA-8: WDC WD10EALX-089BA0, 15.01H15, max UDMA/100 [ 3.057773] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.058924] ata4.00: configured for UDMA/100 [ 3.059326] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.059652] ata2.00: configured for UDMA/100 [ 3.059950] ata3.00: ATA-8: ST2000DM001-1CH164, CC26, max UDMA/133 [ 3.059953] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.059958] scsi 1:0:0:0: Direct-Access ATA WDC WD10EALX-089 1H15 PQ: 0 ANSI: 5 [ 3.060320] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.060322] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.060344] sd 1:0:0:0: [sdb] Write Protect is off [ 3.060348] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.060359] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.060554] ata3.00: configured for UDMA/133 [ 3.060815] scsi 2:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC26 PQ: 0 ANSI: 5 [ 3.061060] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.061064] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 3.061111] sd 2:0:0:0: [sdc] Write Protect is off [ 3.061113] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.061128] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.061455] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.063002] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7261S 1.03 PQ: 0 ANSI: 5 [ 3.068227] usb 3-3: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.068231] usb 3-3: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.068233] usb 3-3: Product: USB2.0 WLAN [ 3.068234] usb 3-3: Manufacturer: ATHEROS [ 3.068235] usb 3-3: SerialNumber: 12345 [ 3.069626] sdc: sdc1 [ 3.070046] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.079638] sdb: sdb1 sdb3 [ 3.080157] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.080952] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.080956] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.081135] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 3.081201] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 3.100978] sda: sda1 sda2 < sda5 > [ 3.101460] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.135442] firewire_core 0000:04:0e.0: created device fw0: GUID 001c74c4001c6f65, S400 [ 3.439319] usb 7-4: new full-speed USB device number 2 using ohci-pci [ 3.535371] [drm] ib test on ring 5 succeeded [ 3.536853] [drm] Radeon Display Connectors [ 3.536856] [drm] Connector 0: [ 3.536857] [drm] DP-1 [ 3.536858] [drm] HPD4 [ 3.536859] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 3.536860] [drm] Encoders: [ 3.536861] [drm] DFP1: INTERNAL_UNIPHY2 [ 3.536862] [drm] Connector 1: [ 3.536862] [drm] HDMI-A-1 [ 3.536863] [drm] HPD5 [ 3.536864] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 3.536865] [drm] Encoders: [ 3.536866] [drm] DFP2: INTERNAL_UNIPHY2 [ 3.536866] [drm] Connector 2: [ 3.536867] [drm] DVI-I-1 [ 3.536868] [drm] HPD1 [ 3.536869] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 3.536870] [drm] Encoders: [ 3.536870] [drm] DFP3: INTERNAL_UNIPHY1 [ 3.536871] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 3.612400] usb 7-4: New USB device found, idVendor=046d, idProduct=c52b [ 3.612404] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.612406] usb 7-4: Product: USB Receiver [ 3.612407] usb 7-4: Manufacturer: Logitech [ 3.620436] hidraw: raw HID events driver (C) Jiri Kosina [ 3.634470] usbcore: registered new interface driver usbhid [ 3.634473] usbhid: USB HID core driver [ 3.640590] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-4/input2 [ 3.651381] [drm] fb mappable at 0xD045F000 [ 3.651384] [drm] vram apper at 0xD0000000 [ 3.651385] [drm] size 8294400 [ 3.651386] [drm] fb depth is 24 [ 3.651387] [drm] pitch is 7680 [ 3.651493] fbcon: radeondrmfb (fb0) is primary device [ 3.651569] Console: switching to colour frame buffer device 240x67 [ 3.651597] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 3.663425] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0 [ 3.762490] input: Logitech M510 as /devices/pci0000:00/0000:00:16.0/usb7/7-4/7-4:1.2/0003:046D:C52B.0003/0003:046D:1025.0004/input/input3 [ 3.762638] logitech-hidpp-device 0003:046D:1025.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M510] on usb-0000:00:16.0-4:1 [ 3.764548] input: Logitech K350 as /devices/pci0000:00/0000:00:16.0/usb7/7-4/7-4:1.2/0003:046D:C52B.0003/0003:046D:200A.0005/input/input4 [ 3.764661] logitech-hidpp-device 0003:046D:200A.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K350] on usb-0000:00:16.0-4:2 [ 4.035481] clocksource: Switched to clocksource tsc [ 5.575449] floppy0: no floppy controllers found [ 5.760570] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.830128] random: nonblocking pool is initialized [ 7.000425] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 7.000563] systemd[1]: Detected architecture x86-64. [ 7.016298] systemd[1]: Set hostname to . [ 9.591602] systemd[1]: PNFS blkmaping enablement. is not active. [ 9.591757] systemd[1]: Dependency failed for pNFS block layout mapping daemon. [ 9.591785] systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'. [ 9.591798] systemd[1]: Reached target User and Group Name Lookups. [ 9.591872] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.591936] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 9.592054] systemd[1]: Created slice System Slice. [ 9.592113] systemd[1]: Listening on udev Kernel Socket. [ 9.592157] systemd[1]: Listening on fsck to fsckd communication Socket. [ 9.592210] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.592260] systemd[1]: Listening on Journal Socket. [ 9.603686] systemd[1]: Mounting Huge Pages File System... [ 9.604345] systemd[1]: Started Read required files in advance. [ 9.771793] systemd[1]: Starting Load Kernel Modules... [ 9.772428] systemd[1]: Starting Uncomplicated firewall... [ 9.773109] systemd[1]: Mounting Debug File System... [ 9.773808] systemd[1]: Starting Set console keymap... [ 9.774517] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 9.775310] systemd[1]: Mounting POSIX Message Queue File System... [ 9.776110] systemd[1]: Started Braille Device Support. [ 9.776371] systemd[1]: Listening on udev Control Socket. [ 9.776434] systemd[1]: Reached target Encrypted Volumes. [ 9.777016] systemd[1]: Mounting RPC Pipe File System... [ 9.778201] systemd[1]: Created slice User and Session Slice. [ 9.778297] systemd[1]: Reached target Slices. [ 9.907235] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 9.907347] systemd[1]: Listening on Syslog Socket. [ 9.907520] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.031709] systemd[1]: Mounting NFSD configuration filesystem... [ 10.031893] systemd[1]: Listening on Journal Audit Socket. [ 10.032471] systemd[1]: Starting Journal Service... [ 10.033906] systemd[1]: Started Uncomplicated firewall. [ 10.034181] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 10.055321] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.253558] systemd[1]: Mounted Huge Pages File System. [ 10.253637] systemd[1]: Mounted Debug File System. [ 10.253663] systemd[1]: Mounted POSIX Message Queue File System. [ 10.613288] lp: driver loaded but no devices found [ 10.691080] ppdev: user-space parallel port driver [ 10.747475] RPC: Registered named UNIX socket transport module. [ 10.747478] RPC: Registered udp transport module. [ 10.747479] RPC: Registered tcp transport module. [ 10.747480] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 10.748437] systemd[1]: Mounted RPC Pipe File System. [ 10.765536] parport_pc 00:04: reported by Plug and Play ACPI [ 10.765604] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 10.777550] systemd[1]: Started Journal Service. [ 10.859780] lp0: using parport0 (interrupt-driven). [ 11.293878] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 15.506690] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 15.928701] systemd-journald[295]: Received request to flush runtime journal from PID 1 [ 16.369787] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.397478] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20150930/utaddress-254) [ 16.397485] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.028866] EDAC MC: Ver: 3.0.0 [ 17.076198] MCE: In-kernel MCE decoding enabled. [ 17.110096] AMD64 EDAC driver v3.4.0 [ 17.110129] EDAC amd64: DRAM ECC disabled. [ 17.110149] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 17.380886] kvm: Nested Virtualization enabled [ 17.380891] kvm: Nested Paging enabled [ 17.491200] media: Linux media interface: v0.10 [ 17.549352] Linux video capture interface: v2.00 [ 17.565120] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 17.602298] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input5 [ 17.881817] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 17.881822] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 17.881824] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 17.881826] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 17.881827] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 17.881828] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 17.881830] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 17.881832] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 17.881833] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 17.881835] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f [ 17.898466] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 17.898528] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 17.898583] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 17.898637] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 17.898692] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 17.898746] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 17.898800] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 17.898853] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 18.724497] usb 3-2: set resolution quirk: cval->res = 384 [ 18.724704] usbcore: registered new interface driver snd-usb-audio [ 18.724724] uvcvideo: Found UVC 1.00 device (046d:081b) [ 18.740157] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:16.2/usb3/3-2/3-2:1.0/input/input14 [ 18.740262] usbcore: registered new interface driver uvcvideo [ 18.740263] USB Video Class driver (1.1.1) [ 19.568082] floppy0: no floppy controllers found [ 20.812886] usb 3-3: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 20.812985] usbcore: registered new interface driver ath9k_htc [ 21.548131] usb 3-3: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 21.773672] audit: type=1400 audit(1500332342.762:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=814 comm="apparmor_parser" [ 21.773681] audit: type=1400 audit(1500332342.762:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=814 comm="apparmor_parser" [ 21.776365] audit: type=1400 audit(1500332342.762:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=818 comm="apparmor_parser" [ 21.776375] audit: type=1400 audit(1500332342.762:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=818 comm="apparmor_parser" [ 21.799728] ath9k_htc 3-3:1.0: ath9k_htc: HTC initialized with 33 credits [ 21.808898] audit: type=1400 audit(1500332342.794:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=816 comm="apparmor_parser" [ 21.808907] audit: type=1400 audit(1500332342.794:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=816 comm="apparmor_parser" [ 21.808912] audit: type=1400 audit(1500332342.794:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=816 comm="apparmor_parser" [ 21.808916] audit: type=1400 audit(1500332342.794:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=816 comm="apparmor_parser" [ 21.808920] audit: type=1400 audit(1500332342.794:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=816 comm="apparmor_parser" [ 21.808924] audit: type=1400 audit(1500332342.794:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=816 comm="apparmor_parser" [ 22.030213] ath9k_htc 3-3:1.0: ath9k_htc: FW Version: 1.4 [ 22.030217] ath9k_htc 3-3:1.0: FW RMW support: On [ 22.030219] ath: EEPROM regdomain: 0x809c [ 22.030220] ath: EEPROM indicates we should expect a country code [ 22.030221] ath: doing EEPROM country->regdmn map search [ 22.030222] ath: country maps to regdmn code: 0x52 [ 22.030223] ath: Country alpha2 being used: CN [ 22.030224] ath: Regpair used: 0x52 [ 22.070785] cfg80211: World regulatory domain updated: [ 22.070789] cfg80211: DFS Master region: unset [ 22.070791] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 22.070793] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 22.070795] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 22.070796] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 22.070798] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 22.070800] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 22.070801] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 22.070802] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 22.070804] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 22.119003] ieee80211 phy0: Atheros AR9271 Rev:1 [ 22.120045] ath9k_htc 3-3:1.0 wlan1: renamed from wlan0 [ 22.132332] cfg80211: Regulatory domain changed to country: CN [ 22.132337] cfg80211: DFS Master region: FCC [ 22.132338] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 22.132340] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 22.132342] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A) [ 22.132344] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 22.132345] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 22.132347] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 22.132348] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A) [ 22.132349] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 22.878397] Adding 8384508k swap on /dev/sda5. Priority:-1 extents:1 across:8384508k FS [ 26.392653] cgroup: new mount options do not match the existing superblock, will be ignored [ 28.083500] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 28.086805] vboxdrv: Found 4 processor cores [ 28.104638] vboxdrv: TSC mode is Invariant, tentative frequency 3214717099 Hz [ 28.104641] vboxdrv: Successfully loaded version 5.0.18 (interface 0x00240000) [ 28.359166] VBoxNetFlt: Successfully started. [ 28.540574] VBoxNetAdp: Successfully started. [ 28.909463] VBoxPciLinuxInit [ 29.119730] vboxpci: IOMMU not found (not registered) [ 33.387862] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 33.520768] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 33.525146] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 35.736526] r8169 0000:06:00.0 eth1: link down [ 35.736579] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 37.370102] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 37.388859] usb 3-2: reset high-speed USB device number 2 using ehci-pci [ 37.511346] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 37.529641] NFSD: starting 90-second grace period (net ffffffff81ef5ec0) [ 39.545378] wlan1: authenticate with c0:c1:c0:4d:82:81 [ 39.733462] wlan1: send auth to c0:c1:c0:4d:82:81 (try 1/3) [ 39.735313] wlan1: authenticated [ 39.737030] wlan1: associate with c0:c1:c0:4d:82:81 (try 1/3) [ 39.741943] wlan1: RX AssocResp from c0:c1:c0:4d:82:81 (capab=0x411 status=0 aid=6) [ 39.748178] wlan1: associated [ 39.748192] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 945.268142] ata1.00: exception Emask 0x10 SAct 0x1f80 SErr 0x400000 action 0x6 frozen [ 945.268154] ata1.00: irq_stat 0x08000000, interface fatal error [ 945.268163] ata1: SError: { Handshk } [ 945.268171] ata1.00: failed command: WRITE FPDMA QUEUED [ 945.268186] ata1.00: cmd 61/30:38:d0:27:85/08:00:02:00:00/40 tag 7 ncq 1073152 out res 40/00:64:18:08:80/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 945.268194] ata1.00: status: { DRDY } [ 945.268200] ata1.00: failed command: WRITE FPDMA QUEUED [ 945.268212] ata1.00: cmd 61/50:40:00:30:85/07:00:02:00:00/40 tag 8 ncq 958464 out res 40/00:64:18:08:80/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 945.268219] ata1.00: status: { DRDY } [ 945.268224] ata1.00: failed command: WRITE FPDMA QUEUED [ 945.268236] ata1.00: cmd 61/b0:48:50:37:85/00:00:02:00:00/40 tag 9 ncq 90112 out res 40/00:64:18:08:80/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 945.268242] ata1.00: status: { DRDY } [ 945.268247] ata1.00: failed command: WRITE FPDMA QUEUED [ 945.268260] ata1.00: cmd 61/00:50:00:38:85/08:00:02:00:00/40 tag 10 ncq 1048576 out res 40/00:64:18:08:80/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 945.268266] ata1.00: status: { DRDY } [ 945.268271] ata1.00: failed command: WRITE FPDMA QUEUED [ 945.268283] ata1.00: cmd 61/00:58:00:40:85/08:00:02:00:00/40 tag 11 ncq 1048576 out res 40/00:64:18:08:80/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 945.268290] ata1.00: status: { DRDY } [ 945.268295] ata1.00: failed command: READ FPDMA QUEUED [ 945.268307] ata1.00: cmd 60/08:60:18:08:80/00:00:02:00:00/40 tag 12 ncq 4096 in res 40/00:64:18:08:80/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 945.268313] ata1.00: status: { DRDY } [ 945.268321] ata1: hard resetting link [ 945.760028] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 945.764478] ata1.00: configured for UDMA/133 [ 945.764536] ata1: EH complete [ 1485.490339] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 1772.358493] ata1.00: exception Emask 0x10 SAct 0xfc0400 SErr 0x400000 action 0x6 frozen [ 1772.358498] ata1.00: irq_stat 0x08000000, interface fatal error [ 1772.358501] ata1: SError: { Handshk } [ 1772.358504] ata1.00: failed command: READ FPDMA QUEUED [ 1772.358509] ata1.00: cmd 60/08:50:d8:14:41/00:00:0b:00:00/40 tag 10 ncq 4096 in res 40/00:bc:90:a1:8b/00:00:2c:00:00/40 Emask 0x10 (ATA bus error) [ 1772.358512] ata1.00: status: { DRDY } [ 1772.358514] ata1.00: failed command: WRITE FPDMA QUEUED [ 1772.358518] ata1.00: cmd 61/30:90:88:08:79/00:00:0c:00:00/40 tag 18 ncq 24576 out res 40/00:bc:90:a1:8b/00:00:2c:00:00/40 Emask 0x10 (ATA bus error) [ 1772.358520] ata1.00: status: { DRDY } [ 1772.358522] ata1.00: failed command: WRITE FPDMA QUEUED [ 1772.358526] ata1.00: cmd 61/10:98:58:6f:05/00:00:0d:00:00/40 tag 19 ncq 8192 out res 40/00:bc:90:a1:8b/00:00:2c:00:00/40 Emask 0x10 (ATA bus error) [ 1772.358528] ata1.00: status: { DRDY } [ 1772.358529] ata1.00: failed command: WRITE FPDMA QUEUED [ 1772.358533] ata1.00: cmd 61/10:a0:f8:29:85/00:00:2c:00:00/40 tag 20 ncq 8192 out res 40/00:bc:90:a1:8b/00:00:2c:00:00/40 Emask 0x10 (ATA bus error) [ 1772.358535] ata1.00: status: { DRDY } [ 1772.358537] ata1.00: failed command: WRITE FPDMA QUEUED [ 1772.358541] ata1.00: cmd 61/10:a8:40:c3:85/00:00:2c:00:00/40 tag 21 ncq 8192 out res 40/00:bc:90:a1:8b/00:00:2c:00:00/40 Emask 0x10 (ATA bus error) [ 1772.358543] ata1.00: status: { DRDY } [ 1772.358544] ata1.00: failed command: WRITE FPDMA QUEUED [ 1772.358548] ata1.00: cmd 61/10:b0:d0:69:89/00:00:2c:00:00/40 tag 22 ncq 8192 out res 40/00:bc:90:a1:8b/00:00:2c:00:00/40 Emask 0x10 (ATA bus error) [ 1772.358550] ata1.00: status: { DRDY } [ 1772.358552] ata1.00: failed command: WRITE FPDMA QUEUED [ 1772.358555] ata1.00: cmd 61/10:b8:90:a1:8b/00:00:2c:00:00/40 tag 23 ncq 8192 out res 40/00:bc:90:a1:8b/00:00:2c:00:00/40 Emask 0x10 (ATA bus error) [ 1772.358557] ata1.00: status: { DRDY } [ 1772.358561] ata1: hard resetting link [ 1772.850459] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1772.854538] ata1.00: configured for UDMA/133 [ 1772.854588] ata1: EH complete [ 1797.473812] ata1.00: exception Emask 0x10 SAct 0x2000 SErr 0x400000 action 0x6 frozen [ 1797.473824] ata1.00: irq_stat 0x08000000, interface fatal error [ 1797.473832] ata1: SError: { Handshk } [ 1797.473841] ata1.00: failed command: WRITE FPDMA QUEUED [ 1797.473855] ata1.00: cmd 61/48:68:58:0b:84/00:00:09:00:00/40 tag 13 ncq 36864 out res 40/00:6c:58:0b:84/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [ 1797.473863] ata1.00: status: { DRDY } [ 1797.473871] ata1: hard resetting link [ 1797.965626] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1797.969035] ata1.00: configured for UDMA/133 [ 1797.969069] ata1: EH complete [ 2214.728719] ata1.00: exception Emask 0x10 SAct 0x30000000 SErr 0x400000 action 0x6 frozen [ 2214.728732] ata1.00: irq_stat 0x08000000, interface fatal error [ 2214.728740] ata1: SError: { Handshk } [ 2214.728749] ata1.00: failed command: WRITE FPDMA QUEUED [ 2214.728763] ata1.00: cmd 61/18:e0:e0:70:88/00:00:02:00:00/40 tag 28 ncq 12288 out res 40/00:ec:98:a7:84/00:00:1c:00:00/40 Emask 0x10 (ATA bus error) [ 2214.728771] ata1.00: status: { DRDY } [ 2214.728776] ata1.00: failed command: WRITE FPDMA QUEUED [ 2214.728789] ata1.00: cmd 61/40:e8:98:a7:84/00:00:1c:00:00/40 tag 29 ncq 32768 out res 40/00:ec:98:a7:84/00:00:1c:00:00/40 Emask 0x10 (ATA bus error) [ 2214.728796] ata1.00: status: { DRDY } [ 2214.728803] ata1: hard resetting link [ 2215.220888] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2215.225259] ata1.00: configured for UDMA/133 [ 2215.225292] ata1: EH complete [ 2432.561355] ata1.00: exception Emask 0x10 SAct 0x1ff SErr 0x400000 action 0x6 frozen [ 2432.561367] ata1.00: irq_stat 0x08000000, interface fatal error [ 2432.561376] ata1: SError: { Handshk } [ 2432.561384] ata1.00: failed command: WRITE FPDMA QUEUED [ 2432.561398] ata1.00: cmd 61/00:00:00:90:ee/08:00:01:00:00/40 tag 0 ncq 1048576 out res 40/00:44:00:d0:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2432.561405] ata1.00: status: { DRDY } [ 2432.561411] ata1.00: failed command: WRITE FPDMA QUEUED [ 2432.561424] ata1.00: cmd 61/00:08:00:98:ee/08:00:01:00:00/40 tag 1 ncq 1048576 out res 40/00:44:00:d0:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2432.561430] ata1.00: status: { DRDY } [ 2432.561436] ata1.00: failed command: WRITE FPDMA QUEUED [ 2432.561447] ata1.00: cmd 61/00:10:00:a0:ee/08:00:01:00:00/40 tag 2 ncq 1048576 out res 40/00:44:00:d0:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2432.561454] ata1.00: status: { DRDY } [ 2432.561459] ata1.00: failed command: WRITE FPDMA QUEUED [ 2432.561470] ata1.00: cmd 61/00:18:00:a8:ee/08:00:01:00:00/40 tag 3 ncq 1048576 out res 40/00:44:00:d0:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2432.561477] ata1.00: status: { DRDY } [ 2432.561482] ata1.00: failed command: WRITE FPDMA QUEUED [ 2432.561493] ata1.00: cmd 61/00:20:00:b0:ee/08:00:01:00:00/40 tag 4 ncq 1048576 out res 40/00:44:00:d0:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2432.561499] ata1.00: status: { DRDY } [ 2432.561504] ata1.00: failed command: WRITE FPDMA QUEUED [ 2432.561516] ata1.00: cmd 61/00:28:00:b8:ee/08:00:01:00:00/40 tag 5 ncq 1048576 out res 40/00:44:00:d0:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2432.561522] ata1.00: status: { DRDY } [ 2432.561527] ata1.00: failed command: WRITE FPDMA QUEUED [ 2432.561539] ata1.00: cmd 61/00:30:00:c0:ee/08:00:01:00:00/40 tag 6 ncq 1048576 out res 40/00:44:00:d0:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2432.561545] ata1.00: status: { DRDY } [ 2432.561550] ata1.00: failed command: WRITE FPDMA QUEUED [ 2432.561562] ata1.00: cmd 61/00:38:00:c8:ee/08:00:01:00:00/40 tag 7 ncq 1048576 out res 40/00:44:00:d0:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2432.561568] ata1.00: status: { DRDY } [ 2432.561573] ata1.00: failed command: WRITE FPDMA QUEUED [ 2432.561584] ata1.00: cmd 61/80:40:00:d0:ee/03:00:01:00:00/40 tag 8 ncq 458752 out res 40/00:44:00:d0:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2432.561591] ata1.00: status: { DRDY } [ 2432.561599] ata1: hard resetting link [ 2433.053310] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2433.057520] ata1.00: configured for UDMA/133 [ 2433.057575] ata1: EH complete [ 2433.073302] ata1.00: exception Emask 0x10 SAct 0x7c000 SErr 0x400000 action 0x6 frozen [ 2433.073313] ata1.00: irq_stat 0x08000000, interface fatal error [ 2433.073321] ata1: SError: { Handshk } [ 2433.073328] ata1.00: failed command: WRITE FPDMA QUEUED [ 2433.073343] ata1.00: cmd 61/00:70:00:b0:ee/08:00:01:00:00/40 tag 14 ncq 1048576 out res 40/00:94:00:90:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2433.073350] ata1.00: status: { DRDY } [ 2433.073356] ata1.00: failed command: WRITE FPDMA QUEUED [ 2433.073369] ata1.00: cmd 61/00:78:00:a8:ee/08:00:01:00:00/40 tag 15 ncq 1048576 out res 40/00:94:00:90:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2433.073375] ata1.00: status: { DRDY } [ 2433.073380] ata1.00: failed command: WRITE FPDMA QUEUED [ 2433.073392] ata1.00: cmd 61/00:80:00:a0:ee/08:00:01:00:00/40 tag 16 ncq 1048576 out res 40/00:94:00:90:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2433.073399] ata1.00: status: { DRDY } [ 2433.073404] ata1.00: failed command: WRITE FPDMA QUEUED [ 2433.073415] ata1.00: cmd 61/00:88:00:98:ee/08:00:01:00:00/40 tag 17 ncq 1048576 out res 40/00:94:00:90:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2433.073422] ata1.00: status: { DRDY } [ 2433.073426] ata1.00: failed command: WRITE FPDMA QUEUED [ 2433.073438] ata1.00: cmd 61/00:90:00:90:ee/08:00:01:00:00/40 tag 18 ncq 1048576 out res 40/00:94:00:90:ee/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2433.073444] ata1.00: status: { DRDY } [ 2433.073453] ata1: hard resetting link [ 2433.565351] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2433.569034] ata1.00: configured for UDMA/133 [ 2433.569082] ata1: EH complete [ 2477.476864] ata1: limiting SATA link speed to 3.0 Gbps [ 2477.476882] ata1.00: exception Emask 0x10 SAct 0x7f8 SErr 0x400000 action 0x6 frozen [ 2477.476890] ata1.00: irq_stat 0x08000000, interface fatal error [ 2477.476897] ata1: SError: { Handshk } [ 2477.476905] ata1.00: failed command: WRITE FPDMA QUEUED [ 2477.476919] ata1.00: cmd 61/00:18:f8:e8:24/08:00:01:00:00/40 tag 3 ncq 1048576 out res 40/00:54:00:60:26/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2477.476926] ata1.00: status: { DRDY } [ 2477.476933] ata1.00: failed command: WRITE FPDMA QUEUED [ 2477.476946] ata1.00: cmd 61/00:20:f8:f0:24/08:00:01:00:00/40 tag 4 ncq 1048576 out res 40/00:54:00:60:26/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2477.476952] ata1.00: status: { DRDY } [ 2477.476958] ata1.00: failed command: WRITE FPDMA QUEUED [ 2477.476970] ata1.00: cmd 61/00:28:f8:f8:24/08:00:01:00:00/40 tag 5 ncq 1048576 out res 40/00:54:00:60:26/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2477.476976] ata1.00: status: { DRDY } [ 2477.476981] ata1.00: failed command: WRITE FPDMA QUEUED [ 2477.476993] ata1.00: cmd 61/08:30:f8:00:25/07:00:01:00:00/40 tag 6 ncq 921600 out res 40/00:54:00:60:26/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2477.476999] ata1.00: status: { DRDY } [ 2477.477005] ata1.00: failed command: WRITE FPDMA QUEUED [ 2477.477016] ata1.00: cmd 61/00:38:00:48:26/08:00:01:00:00/40 tag 7 ncq 1048576 out res 40/00:54:00:60:26/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2477.477023] ata1.00: status: { DRDY } [ 2477.477028] ata1.00: failed command: WRITE FPDMA QUEUED [ 2477.477039] ata1.00: cmd 61/00:40:00:50:26/08:00:01:00:00/40 tag 8 ncq 1048576 out res 40/00:54:00:60:26/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2477.477046] ata1.00: status: { DRDY } [ 2477.477051] ata1.00: failed command: WRITE FPDMA QUEUED [ 2477.477063] ata1.00: cmd 61/00:48:00:58:26/08:00:01:00:00/40 tag 9 ncq 1048576 out res 40/00:54:00:60:26/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2477.477069] ata1.00: status: { DRDY } [ 2477.477074] ata1.00: failed command: WRITE FPDMA QUEUED [ 2477.477086] ata1.00: cmd 61/20:50:00:60:26/07:00:01:00:00/40 tag 10 ncq 933888 out res 40/00:54:00:60:26/00:00:01:00:00/40 Emask 0x10 (ATA bus error) [ 2477.477093] ata1.00: status: { DRDY } [ 2477.477105] ata1: hard resetting link [ 2477.972913] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 2477.977197] ata1.00: configured for UDMA/133 [ 2477.977237] ata1: EH complete [66748.306104] [drm:cypress_dpm_set_power_state [radeon]] *ERROR* rv770_restrict_performance_levels_before_switch failed [68127.798851] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [105951.248381] perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [163043.188285] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [173959.172751] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [174859.437884] nfsd: last server has exited, flushing export cache [176472.022522] [drm:cypress_dpm_set_power_state [radeon]] *ERROR* rv770_restrict_performance_levels_before_switch failed