[ 23.719075] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.719427] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.754959] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0x8a0400 [ 23.803608] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input15 [ 24.493428] vboxdrv: Found 8 processor cores. [ 24.493921] vboxdrv: fAsync=0 offMin=0x1a7 offMax=0x4207 [ 24.493996] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 24.493999] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000). [ 24.502433] vboxpci: IOMMU not found (not registered) [ 24.551358] init: udev-fallback-graphics main process (1304) terminated with status 1 [ 24.563778] init: kdm main process (1332) killed by TERM signal [ 31.342896] wlan0: authenticate with 00:22:75:02:68:05 (try 1) [ 31.345424] wlan0: authenticated [ 31.351968] wlan0: associate with 00:22:75:02:68:05 (try 1) [ 31.356423] wlan0: RX AssocResp from 00:22:75:02:68:05 (capab=0x411 status=0 aid=3) [ 31.356430] wlan0: associated [ 31.368350] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 31.368537] cfg80211: Calling CRDA for country: US [ 31.371817] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 31.371820] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.371822] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 31.371824] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.371825] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 31.371827] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.371829] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 31.371831] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.371832] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 31.371834] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.371835] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 31.371837] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.371839] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 31.371841] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.371842] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 31.371844] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.371845] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 31.371847] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.371849] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 31.371851] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.371852] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 31.371854] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.371855] cfg80211: Disabling freq 2467 MHz [ 31.371857] cfg80211: Disabling freq 2472 MHz [ 31.371858] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 31.371860] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 31.371861] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 31.371863] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 31.371865] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 31.371867] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 31.371868] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 31.371870] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 31.371871] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 31.371873] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371875] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 31.371877] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371878] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 31.371880] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371882] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 31.371883] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371885] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 31.371887] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371888] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 31.371890] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371892] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 31.371894] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371895] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 31.371897] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371898] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 31.371900] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371902] cfg80211: Disabling freq 5600 MHz [ 31.371903] cfg80211: Disabling freq 5620 MHz [ 31.371904] cfg80211: Disabling freq 5640 MHz [ 31.371905] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 31.371907] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371908] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 31.371910] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371912] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 31.371914] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371915] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [ 31.371917] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 31.371919] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [ 31.371920] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 31.371922] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [ 31.371924] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 31.371925] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [ 31.371927] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 31.371929] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [ 31.371931] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 31.371934] cfg80211: Regulatory domain changed to country: US [ 31.371935] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 31.371937] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.371938] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 31.371940] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371942] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371943] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.371945] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 42.099101] wlan0: no IPv6 routers present [ 194.684458] iwlwifi 0000:04:00.0: Tx aggregation enabled on ra = 00:22:75:02:68:05 tid = 0 [ 4037.723818] iwlwifi 0000:04:00.0: Tx aggregation enabled on ra = 00:22:75:02:68:05 tid = 6 [ 4161.492024] usb 2-1.3: new high-speed USB device number 3 using ehci_hcd [ 4161.696662] Initializing USB Mass Storage driver... [ 4161.697691] scsi6 : usb-storage 2-1.3:1.0 [ 4161.697904] usbcore: registered new interface driver usb-storage [ 4161.697907] USB Mass Storage support registered. [ 4161.752793] usbcore: registered new interface driver uas [ 4161.932948] usb 2-1.3: USB disconnect, device number 3 [ 4169.020847] usb 2-1.3: new high-speed USB device number 4 using ehci_hcd [ 4169.130544] scsi9 : usb-storage 2-1.3:1.2 [ 4169.131432] scsi10 : usb-storage 2-1.3:1.3 [ 4169.159502] usbcore: registered new interface driver usbserial [ 4169.159533] USB Serial support registered for generic [ 4169.485353] usbcore: registered new interface driver usbserial_generic [ 4169.485359] usbserial: USB Serial Driver core [ 4169.487641] USB Serial support registered for GSM modem (1-port) [ 4169.487848] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4169.488051] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4169.488084] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4169.488292] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4169.488431] usbcore: registered new interface driver option [ 4169.488437] option: v0.7.2:USB Driver for GSM modems [ 4170.132010] scsi 9:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 4170.134079] scsi 10:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2 [ 4170.144111] sr1: scsi-1 drive [ 4170.144363] sr 9:0:0:0: Attached scsi CD-ROM sr1 [ 4170.144488] sr 9:0:0:0: Attached scsi generic sg2 type 5 [ 4170.144956] sd 10:0:0:0: Attached scsi generic sg3 type 0 [ 4170.155104] sd 10:0:0:0: [sdb] Attached SCSI removable disk [ 4175.069319] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 4175.069328] ata5: irq_stat 0x00000040, connection status changed [ 4175.069334] ata5: SError: { CommWake DevExch } [ 4175.069345] ata5: hard resetting link [ 4175.789731] ata5: SATA link down (SStatus 0 SControl 300) [ 4175.805648] ata5: EH complete [ 4177.481349] option: option_instat_callback: error -108 [ 4182.515618] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4182.515643] option 2-1.3:1.0: device disconnected [ 4185.521612] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB1 took too long, but we keep waiting... [ 4187.513411] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4187.513437] option 2-1.3:1.1: device disconnected [ 4187.585156] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4187.686331] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4187.686636] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4187.686926] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4187.687191] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4190.719760] option: option_instat_callback: error -108 [ 4190.720056] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4190.720090] option 2-1.3:1.0: device disconnected [ 4200.703161] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4202.702958] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4202.703023] option 2-1.3:1.1: device disconnected [ 4202.774750] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4202.872077] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4202.872445] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4202.872685] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4202.872891] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4205.905165] option: option_instat_callback: error -108 [ 4205.905460] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4205.905497] option 2-1.3:1.0: device disconnected [ 4215.888754] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4217.888312] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4217.888344] option 2-1.3:1.1: device disconnected [ 4217.889979] do_general_protection: 42 callbacks suppressed [ 4217.889987] modem-manager[975] general protection ip:7f8abf33df0c sp:7fff2a5b4a70 error:0 in libgobject-2.0.so.0.3200.1[7f8abf30b000+4d000] [ 4217.960048] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4218.057843] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4218.058065] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4218.058282] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4218.058507] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4218.783804] init: modemmanager main process (975) killed by SEGV signal [ 4218.783859] init: modemmanager main process ended, respawning [ 4225.588917] option: option_instat_callback: error -108 [ 4225.589224] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4225.589262] option 2-1.3:1.0: device disconnected [ 4234.800803] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4236.800404] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4236.800438] option 2-1.3:1.1: device disconnected [ 4236.876230] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4236.973648] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4236.973836] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4236.973971] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4236.974113] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4244.524934] option: option_instat_callback: error -108 [ 4244.525234] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4244.525273] option 2-1.3:1.0: device disconnected [ 4249.982932] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4249.982966] option 2-1.3:1.1: device disconnected [ 4250.054503] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4250.151866] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4250.152143] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4250.152390] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4250.152608] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4257.319513] option: option_instat_callback: error -108 [ 4257.319818] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4257.319865] option 2-1.3:1.0: device disconnected [ 4266.167579] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4268.167462] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4268.167487] option 2-1.3:1.1: device disconnected [ 4268.238858] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4268.344301] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4268.344608] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4268.344862] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4268.345129] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4275.743748] option: option_instat_callback: error -108 [ 4275.744050] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4275.744098] option 2-1.3:1.0: device disconnected [ 4281.361485] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4281.361519] option 2-1.3:1.1: device disconnected [ 4281.437091] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4281.534865] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4281.535148] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4281.535334] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4281.535655] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4289.054138] option: option_instat_callback: error -108 [ 4289.054451] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4289.054488] option 2-1.3:1.0: device disconnected [ 4294.552046] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4294.552078] option 2-1.3:1.1: device disconnected [ 4294.623528] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4294.721095] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4294.721391] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4294.721636] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4294.721839] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4301.852550] option: option_instat_callback: error -108 [ 4301.852843] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4301.852886] option 2-1.3:1.0: device disconnected [ 4310.728734] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4312.728461] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4312.728495] option 2-1.3:1.1: device disconnected [ 4312.800928] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4312.901502] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4312.901797] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4312.902171] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4312.902452] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4320.268953] option: option_instat_callback: error -108 [ 4320.269252] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4320.269288] option 2-1.3:1.0: device disconnected [ 4325.918824] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4325.918850] option 2-1.3:1.1: device disconnected [ 4325.990497] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4326.087920] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4326.088153] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4326.088363] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4326.088591] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4333.575345] option: option_instat_callback: error -108 [ 4333.575647] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4333.575683] option 2-1.3:1.0: device disconnected [ 4342.103515] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4344.103205] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4344.103240] option 2-1.3:1.1: device disconnected [ 4344.178936] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4344.280324] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4344.280659] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4344.280895] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4344.281101] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4351.487736] option: option_instat_callback: error -108 [ 4351.488007] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4351.488045] option 2-1.3:1.0: device disconnected [ 4360.295796] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4362.295376] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4362.295411] option 2-1.3:1.1: device disconnected [ 4362.367136] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4362.464570] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4362.464788] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4362.465068] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4362.465252] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4369.912008] option: option_instat_callback: error -108 [ 4369.912304] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4369.912343] option 2-1.3:1.0: device disconnected [ 4378.479972] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4380.483671] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4380.483702] option 2-1.3:1.1: device disconnected [ 4380.559428] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4380.664779] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4380.665004] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4380.665162] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4380.665328] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4387.824267] option: option_instat_callback: error -108 [ 4387.824487] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4387.824543] option 2-1.3:1.0: device disconnected [ 4396.672394] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4398.671937] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4398.671962] option 2-1.3:1.1: device disconnected [ 4398.743786] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4398.841294] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4398.841605] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4398.841859] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4398.842064] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4406.248500] option: option_instat_callback: error -108 [ 4406.248773] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4406.248810] option 2-1.3:1.0: device disconnected [ 4414.856719] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4416.856369] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4416.856394] option 2-1.3:1.1: device disconnected [ 4416.928102] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4417.028844] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4417.029206] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4417.029543] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4417.029822] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4424.161063] option: option_instat_callback: error -108 [ 4424.161300] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4424.161337] option 2-1.3:1.0: device disconnected [ 4433.052991] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4435.048790] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4435.048824] option 2-1.3:1.1: device disconnected [ 4435.120140] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4435.217721] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4435.217933] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4435.218130] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4435.218400] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4442.585477] option: option_instat_callback: error -108 [ 4442.585781] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4442.585826] option 2-1.3:1.0: device disconnected [ 4451.233394] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4453.233030] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4453.233055] option 2-1.3:1.1: device disconnected [ 4453.304578] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4453.405912] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4453.406237] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4453.406429] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4453.406725] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4460.497637] option: option_instat_callback: error -108 [ 4460.497944] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4460.497981] option 2-1.3:1.0: device disconnected [ 4469.429689] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4471.429289] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4471.429323] option 2-1.3:1.1: device disconnected [ 4471.501075] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4471.606346] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4471.606535] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4471.606804] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4471.607045] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4478.921889] option: option_instat_callback: error -108 [ 4478.922194] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4478.922230] option 2-1.3:1.0: device disconnected [ 4487.626008] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4489.625502] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4489.625526] option 2-1.3:1.1: device disconnected [ 4489.697289] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4489.794786] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4489.794991] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4489.795251] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4489.795447] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1 [ 4497.346245] option: option_instat_callback: error -108 [ 4497.346574] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 4497.346611] option 2-1.3:1.0: device disconnected [ 4505.814231] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 4507.809984] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 4507.810009] option 2-1.3:1.1: device disconnected [ 4507.881737] usb 2-1.3: reset high-speed USB device number 4 using ehci_hcd [ 4507.979194] option 2-1.3:1.1: GSM modem (1-port) converter detected [ 4507.979423] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB0 [ 4507.979719] option 2-1.3:1.0: GSM modem (1-port) converter detected [ 4507.979945] usb 2-1.3: GSM modem (1-port) converter now attached to ttyUSB1