Sep  7 08:02:43 pelle kernel: [32327.286623] ath5k phy0: unsupported jumbo
Sep  7 08:05:26 pelle kernel: [32489.459243] ath5k phy0: unsupported jumbo
Sep  7 09:09:13 pelle dhclient: DHCPREQUEST of 192.168.1.2 on wlan0 to 192.168.1.1 port 67
Sep  7 09:09:13 pelle dhclient: DHCPACK of 192.168.1.2 from 192.168.1.1
Sep  7 09:09:13 pelle dhclient: bound to 192.168.1.2 -- renewal in 35003 seconds.
Sep  7 09:09:13 pelle NetworkManager: <info>  DHCP: device wlan0 state changed reboot -> renew
Sep  7 09:09:13 pelle NetworkManager: <info>    address 192.168.1.2
Sep  7 09:09:13 pelle NetworkManager: <info>    prefix 24 (255.255.255.0)
Sep  7 09:09:13 pelle NetworkManager: <info>    gateway 192.168.1.1
Sep  7 09:09:13 pelle NetworkManager: <info>    nameserver '192.168.1.1'
Sep  7 15:37:53 pelle kernel: [59637.273379] ath5k phy0: unsupported jumbo
Sep  7 18:52:36 pelle dhclient: DHCPREQUEST of 192.168.1.2 on wlan0 to 192.168.1.1 port 67
Sep  7 18:52:36 pelle dhclient: DHCPACK of 192.168.1.2 from 192.168.1.1
Sep  7 18:52:36 pelle dhclient: bound to 192.168.1.2 -- renewal in 42464 seconds.
Sep  7 19:08:05 pelle kernel: [72248.460080] CE: hpet increasing min_delta_ns to 15000 nsec
Sep  7 21:24:21 pelle kernel: [80424.503044] __ratelimit: 9 callbacks suppressed
Sep  7 21:24:21 pelle kernel: [80424.503058] python[1329]: segfault at 19 ip 00000019 sp bf84f4cc error 4 in libm-2.11.1.so[110000+24000]
Sep  7 21:24:21 pelle kernel: Kernel logging (proc) stopped.
Sep  7 21:28:49 pelle kernel: imklog 4.2.0, log source = /proc/kmsg started.
Sep  7 21:28:49 pelle kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep  7 21:28:49 pelle kernel: [    0.000000] Initializing cgroup subsys cpu
Sep  7 21:28:49 pelle kernel: [    0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
Sep  7 21:28:49 pelle kernel: [    0.000000] KERNEL supported cpus:
Sep  7 21:28:49 pelle kernel: [    0.000000]   Intel GenuineIntel
Sep  7 21:28:49 pelle kernel: [    0.000000]   AMD AuthenticAMD
Sep  7 21:28:49 pelle kernel: [    0.000000]   NSC Geode by NSC
Sep  7 21:28:49 pelle kernel: [    0.000000]   Cyrix CyrixInstead
Sep  7 21:28:49 pelle kernel: [    0.000000]   Centaur CentaurHauls
Sep  7 21:28:49 pelle kernel: [    0.000000]   Transmeta GenuineTMx86
Sep  7 21:28:49 pelle kernel: [    0.000000]   Transmeta TransmetaCPU
Sep  7 21:28:49 pelle kernel: [    0.000000]   UMC UMC UMC UMC
Sep  7 21:28:49 pelle kernel: [    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  7 21:28:49 pelle kernel: [    0.000000] BIOS-provided physical RAM map:
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000] DMI 2.4 present.
Sep  7 21:28:49 pelle kernel: [    0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
Sep  7 21:28:49 pelle kernel: [    0.000000] MTRR default type: uncachable
Sep  7 21:28:49 pelle kernel: [    0.000000] MTRR fixed ranges enabled:
Sep  7 21:28:49 pelle kernel: [    0.000000]   00000-9FFFF write-back
Sep  7 21:28:49 pelle kernel: [    0.000000]   A0000-BFFFF uncachable
Sep  7 21:28:49 pelle kernel: [    0.000000]   C0000-C7FFF write-protect
Sep  7 21:28:49 pelle kernel: [    0.000000]   C8000-EFFFF uncachable
Sep  7 21:28:49 pelle kernel: [    0.000000]   F0000-FFFFF write-protect
Sep  7 21:28:49 pelle kernel: [    0.000000] MTRR variable ranges enabled:
Sep  7 21:28:49 pelle kernel: [    0.000000]   0 base 0FFFE0000 mask 0FFFE0000 write-protect
Sep  7 21:28:49 pelle kernel: [    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
Sep  7 21:28:49 pelle kernel: [    0.000000]   2 base 000000000 mask 0E0000000 write-back
Sep  7 21:28:49 pelle kernel: [    0.000000]   3 base 020000000 mask 0E0000000 write-back
Sep  7 21:28:49 pelle kernel: [    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
Sep  7 21:28:49 pelle kernel: [    0.000000]   5 base 03F600000 mask 0FFE00000 uncachable
Sep  7 21:28:49 pelle kernel: [    0.000000]   6 base 03F500000 mask 0FFF00000 uncachable
Sep  7 21:28:49 pelle kernel: [    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
Sep  7 21:28:49 pelle kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep  7 21:28:49 pelle kernel: [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000] Scanning 1 areas for low memory corruption
Sep  7 21:28:49 pelle kernel: [    0.000000] modified physical RAM map:
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 0000000000100000 - 000000003f376000 (usable)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 000000003f4ff000 - 000000003f500000 (usable)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 000000003f500000 - 0000000040000000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Sep  7 21:28:49 pelle kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Sep  7 21:28:49 pelle kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Sep  7 21:28:49 pelle kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Sep  7 21:28:49 pelle kernel: [    0.000000]  0000000000 - 00377fe000 page 4k
Sep  7 21:28:49 pelle kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 8e2000-9c3000
Sep  7 21:28:49 pelle kernel: [    0.000000] RAMDISK: 2ef3e000 - 2f6d822e
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: RSDP 000fe020 00024 (v02 INTEL )
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: XSDT 3f4fe120 00064 (v01 INTEL  Napa     00000001      01000013)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: FACP 3f4fc000 000F4 (v04 INTEL  Napa     00000001 MSFT 01000013)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: DSDT 3f4f2000 05DE4 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: FACS 3f488000 00040
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: SSDT 3f4fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: HPET 3f4fb000 00038 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: APIC 3f4fa000 00068 (v02 INTEL  Napa     00000001 MSFT 01000013)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: MCFG 3f4f9000 0003C (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 INTEL  Napa     00000001 MSFT 01000013)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: SLIC 3f4f1000 00180 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: BOOT 3f4f0000 00028 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  7 21:28:49 pelle kernel: [    0.000000] 125MB HIGHMEM available.
Sep  7 21:28:49 pelle kernel: [    0.000000] 887MB LOWMEM available.
Sep  7 21:28:49 pelle kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Sep  7 21:28:49 pelle kernel: [    0.000000]   low ram: 0 - 377fe000
Sep  7 21:28:49 pelle kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Sep  7 21:28:49 pelle kernel: [    0.000000]   node 0 bootmap 00007000 - 0000df00
Sep  7 21:28:49 pelle kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Sep  7 21:28:49 pelle kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Sep  7 21:28:49 pelle kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Sep  7 21:28:49 pelle kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Sep  7 21:28:49 pelle kernel: [    0.000000]   #3 [0000100000 - 00008ddeb8]    TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
Sep  7 21:28:49 pelle kernel: [    0.000000]   #4 [002ef3e000 - 002f6d822e]          RAMDISK ==> [002ef3e000 - 002f6d822e]
Sep  7 21:28:49 pelle kernel: [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Sep  7 21:28:49 pelle kernel: [    0.000000]   #6 [00008de000 - 00008e1244]              BRK ==> [00008de000 - 00008e1244]
Sep  7 21:28:49 pelle kernel: [    0.000000]   #7 [00008e2000 - 00009bd000]          PGTABLE ==> [00008e2000 - 00009bd000]
Sep  7 21:28:49 pelle kernel: [    0.000000]   #8 [0000007000 - 000000e000]          BOOTMAP ==> [0000007000 - 000000e000]
Sep  7 21:28:49 pelle kernel: [    0.000000] Zone PFN ranges:
Sep  7 21:28:49 pelle kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Sep  7 21:28:49 pelle kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Sep  7 21:28:49 pelle kernel: [    0.000000]   HighMem  0x000377fe -> 0x0003f500
Sep  7 21:28:49 pelle kernel: [    0.000000] Movable zone start PFN for each node
Sep  7 21:28:49 pelle kernel: [    0.000000] early_node_map[6] active PFN ranges
Sep  7 21:28:49 pelle kernel: [    0.000000]     0: 0x00000000 -> 0x00000002
Sep  7 21:28:49 pelle kernel: [    0.000000]     0: 0x00000006 -> 0x0000009f
Sep  7 21:28:49 pelle kernel: [    0.000000]     0: 0x00000100 -> 0x0003f376
Sep  7 21:28:49 pelle kernel: [    0.000000]     0: 0x0003f3bf -> 0x0003f46d
Sep  7 21:28:49 pelle kernel: [    0.000000]     0: 0x0003f4bf -> 0x0003f4f0
Sep  7 21:28:49 pelle kernel: [    0.000000]     0: 0x0003f4ff -> 0x0003f500
Sep  7 21:28:49 pelle kernel: [    0.000000] On node 0 totalpages: 259057
Sep  7 21:28:49 pelle kernel: [    0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000
Sep  7 21:28:49 pelle kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Sep  7 21:28:49 pelle kernel: [    0.000000]   DMA zone: 0 pages reserved
Sep  7 21:28:49 pelle kernel: [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
Sep  7 21:28:49 pelle kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Sep  7 21:28:49 pelle kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Sep  7 21:28:49 pelle kernel: [    0.000000]   HighMem zone: 251 pages used for memmap
Sep  7 21:28:49 pelle kernel: [    0.000000]   HighMem zone: 31581 pages, LIFO batch:7
Sep  7 21:28:49 pelle kernel: [    0.000000] Using APIC driver default
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Sep  7 21:28:49 pelle kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: IRQ2 used by override.
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep  7 21:28:49 pelle kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep  7 21:28:49 pelle kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep  7 21:28:49 pelle kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep  7 21:28:49 pelle kernel: [    0.000000] nr_irqs_gsi: 24
Sep  7 21:28:49 pelle kernel: [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Sep  7 21:28:49 pelle kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep  7 21:28:49 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Sep  7 21:28:49 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Sep  7 21:28:49 pelle kernel: [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Sep  7 21:28:49 pelle kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep  7 21:28:49 pelle kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Sep  7 21:28:49 pelle kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536
Sep  7 21:28:49 pelle kernel: [    0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
Sep  7 21:28:49 pelle kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 
Sep  7 21:28:49 pelle kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257030
Sep  7 21:28:49 pelle kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=05e65f51-4919-405f-ae5e-374a2ae344e8 ro quiet splash
Sep  7 21:28:49 pelle kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Sep  7 21:28:49 pelle kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep  7 21:28:49 pelle kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep  7 21:28:49 pelle kernel: [    0.000000] Enabling fast FPU save and restore... done.
Sep  7 21:28:49 pelle kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Sep  7 21:28:49 pelle kernel: [    0.000000] Initializing CPU#0
Sep  7 21:28:49 pelle kernel: [    0.000000] allocated 5186560 bytes of page_cgroup
Sep  7 21:28:49 pelle kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep  7 21:28:49 pelle kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
Sep  7 21:28:49 pelle kernel: [    0.000000] Memory: 1004836k/1037312k available (4679k kernel code, 30884k reserved, 2124k data, 660k init, 127328k highmem)
Sep  7 21:28:49 pelle kernel: [    0.000000] virtual kernel memory layout:
Sep  7 21:28:49 pelle kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Sep  7 21:28:49 pelle kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Sep  7 21:28:49 pelle kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Sep  7 21:28:49 pelle kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Sep  7 21:28:49 pelle kernel: [    0.000000]       .init : 0xc07a5000 - 0xc084a000   ( 660 kB)
Sep  7 21:28:49 pelle kernel: [    0.000000]       .data : 0xc0591e33 - 0xc07a4e88   (2124 kB)
Sep  7 21:28:49 pelle kernel: [    0.000000]       .text : 0xc0100000 - 0xc0591e33   (4679 kB)
Sep  7 21:28:49 pelle kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Sep  7 21:28:49 pelle kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep  7 21:28:49 pelle kernel: [    0.000000] Hierarchical RCU implementation.
Sep  7 21:28:49 pelle kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Sep  7 21:28:49 pelle kernel: [    0.000000] Console: colour VGA+ 80x25
Sep  7 21:28:49 pelle kernel: [    0.000000] console [tty0] enabled
Sep  7 21:28:49 pelle kernel: [    0.000000] hpet clockevent registered
Sep  7 21:28:49 pelle kernel: [    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Sep  7 21:28:49 pelle kernel: [    0.000000] Fast TSC calibration using PIT
Sep  7 21:28:49 pelle kernel: [    0.000000] Detected 1596.083 MHz processor.
Sep  7 21:28:49 pelle kernel: [    0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.16 BogoMIPS (lpj=6384332)
Sep  7 21:28:49 pelle kernel: [    0.004048] Security Framework initialized
Sep  7 21:28:49 pelle kernel: [    0.004093] AppArmor: AppArmor initialized
Sep  7 21:28:49 pelle kernel: [    0.004110] Mount-cache hash table entries: 512
Sep  7 21:28:49 pelle kernel: [    0.004357] Initializing cgroup subsys ns
Sep  7 21:28:49 pelle kernel: [    0.004367] Initializing cgroup subsys cpuacct
Sep  7 21:28:49 pelle kernel: [    0.004377] Initializing cgroup subsys memory
Sep  7 21:28:49 pelle kernel: [    0.004392] Initializing cgroup subsys devices
Sep  7 21:28:49 pelle kernel: [    0.004398] Initializing cgroup subsys freezer
Sep  7 21:28:49 pelle kernel: [    0.004404] Initializing cgroup subsys net_cls
Sep  7 21:28:49 pelle kernel: [    0.004439] Atom PSE erratum detected, BIOS microcode update recommended
Sep  7 21:28:49 pelle kernel: [    0.004448] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  7 21:28:49 pelle kernel: [    0.004455] CPU: L2 cache: 512K
Sep  7 21:28:49 pelle kernel: [    0.004460] CPU: Physical Processor ID: 0
Sep  7 21:28:49 pelle kernel: [    0.004465] CPU: Processor Core ID: 0
Sep  7 21:28:49 pelle kernel: [    0.004472] mce: CPU supports 5 MCE banks
Sep  7 21:28:49 pelle kernel: [    0.004490] CPU0: Thermal monitoring enabled (TM1)
Sep  7 21:28:49 pelle kernel: [    0.004499] using mwait in idle threads.
Sep  7 21:28:49 pelle kernel: [    0.004510] Performance Events: Atom events, Intel PMU driver.
Sep  7 21:28:49 pelle kernel: [    0.004528] ... version:                3
Sep  7 21:28:49 pelle kernel: [    0.004533] ... bit width:              40
Sep  7 21:28:49 pelle kernel: [    0.004538] ... generic registers:      2
Sep  7 21:28:49 pelle kernel: [    0.004543] ... value mask:             000000ffffffffff
Sep  7 21:28:49 pelle kernel: [    0.004548] ... max period:             000000007fffffff
Sep  7 21:28:49 pelle kernel: [    0.004553] ... fixed-purpose events:   3
Sep  7 21:28:49 pelle kernel: [    0.004558] ... event mask:             0000000700000003
Sep  7 21:28:49 pelle kernel: [    0.004567] Checking 'hlt' instruction... OK.
Sep  7 21:28:49 pelle kernel: [    0.020009] Disabling 4MB page tables to avoid TLB bug
Sep  7 21:28:49 pelle kernel: [    0.024453] ACPI: Core revision 20090903
Sep  7 21:28:49 pelle kernel: [    0.040019] ftrace: converting mcount calls to 0f 1f 44 00 00
Sep  7 21:28:49 pelle kernel: [    0.040031] ftrace: allocating 21780 entries in 43 pages
Sep  7 21:28:49 pelle kernel: [    0.044111] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep  7 21:28:49 pelle kernel: [    0.044515] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep  7 21:28:49 pelle kernel: [    0.086297] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  7 21:28:49 pelle kernel: [    0.088001] Booting processor 1 APIC 0x1 ip 0x6000
Sep  7 21:28:49 pelle kernel: [    0.008000] Initializing CPU#1
Sep  7 21:28:49 pelle kernel: [    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  7 21:28:49 pelle kernel: [    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  7 21:28:49 pelle kernel: [    0.008000] CPU: L2 cache: 512K
Sep  7 21:28:49 pelle kernel: [    0.008000] CPU: Physical Processor ID: 0
Sep  7 21:28:49 pelle kernel: [    0.008000] CPU: Processor Core ID: 0
Sep  7 21:28:49 pelle kernel: [    0.008000] CPU1: Thermal monitoring enabled (TM1)
Sep  7 21:28:49 pelle kernel: [    0.172078] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  7 21:28:49 pelle kernel: [    0.172108] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep  7 21:28:49 pelle kernel: [    0.176035] Brought up 2 CPUs
Sep  7 21:28:49 pelle kernel: [    0.176043] Total of 2 processors activated (6384.11 BogoMIPS).
Sep  7 21:28:49 pelle kernel: [    0.176289] CPU0 attaching sched-domain:
Sep  7 21:28:49 pelle kernel: [    0.176298]  domain 0: span 0-1 level SIBLING
Sep  7 21:28:49 pelle kernel: [    0.176304]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  7 21:28:49 pelle kernel: [    0.176318]   domain 1: span 0-1 level MC
Sep  7 21:28:49 pelle kernel: [    0.176324]    groups: 0-1 (cpu_power = 1178)
Sep  7 21:28:49 pelle kernel: [    0.176336] CPU1 attaching sched-domain:
Sep  7 21:28:49 pelle kernel: [    0.176341]  domain 0: span 0-1 level SIBLING
Sep  7 21:28:49 pelle kernel: [    0.176346]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  7 21:28:49 pelle kernel: [    0.176358]   domain 1: span 0-1 level MC
Sep  7 21:28:49 pelle kernel: [    0.176363]    groups: 0-1 (cpu_power = 1178)
Sep  7 21:28:49 pelle kernel: [    0.176594] devtmpfs: initialized
Sep  7 21:28:49 pelle kernel: [    0.176594] regulator: core version 0.5
Sep  7 21:28:49 pelle kernel: [    0.176594] Time: 18:28:35  Date: 09/07/10
Sep  7 21:28:49 pelle kernel: [    0.176594] NET: Registered protocol family 16
Sep  7 21:28:49 pelle kernel: [    0.176594] Trying to unpack rootfs image as initramfs...
Sep  7 21:28:49 pelle kernel: [    0.176594] EISA bus registered
Sep  7 21:28:49 pelle kernel: [    0.176611] ACPI: bus type pci registered
Sep  7 21:28:49 pelle kernel: [    0.176784] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Sep  7 21:28:49 pelle kernel: [    0.176794] PCI: MCFG area at e0000000 reserved in E820
Sep  7 21:28:49 pelle kernel: [    0.176800] PCI: Using MMCONFIG for extended config space
Sep  7 21:28:49 pelle kernel: [    0.176807] PCI: Using configuration type 1 for base access
Sep  7 21:28:49 pelle kernel: [    0.181783] bio: create slab <bio-0> at 0
Sep  7 21:28:49 pelle kernel: [    0.184347] ACPI: EC: Look up EC in DSDT
Sep  7 21:28:49 pelle kernel: [    0.188626] ACPI: Executed 1 blocks of module-level executable AML code
Sep  7 21:28:49 pelle kernel: [    0.193006] ACPI: BIOS _OSI(Linux) query ignored
Sep  7 21:28:49 pelle kernel: [    0.193283] ACPI: BIOS _OSI(Linux) query ignored
Sep  7 21:28:49 pelle kernel: [    0.200457] ACPI: Interpreter enabled
Sep  7 21:28:49 pelle kernel: [    0.200477] ACPI: (supports S0 S3 S4 S5)
Sep  7 21:28:49 pelle kernel: [    0.200549] ACPI: Using IOAPIC for interrupt routing
Sep  7 21:28:49 pelle kernel: [    0.214683] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Sep  7 21:28:49 pelle kernel: [    0.215351] ACPI: No dock devices found.
Sep  7 21:28:49 pelle kernel: [    0.217174] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.217195] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.217217] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
Sep  7 21:28:49 pelle kernel: [    0.217283] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep  7 21:28:49 pelle kernel: [    0.217489] pci 0000:00:02.0: reg 10 32bit mmio: [0x58480000-0x584fffff]
Sep  7 21:28:49 pelle kernel: [    0.217503] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
Sep  7 21:28:49 pelle kernel: [    0.217516] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
Sep  7 21:28:49 pelle kernel: [    0.217528] pci 0000:00:02.0: reg 1c 32bit mmio: [0x58500000-0x5853ffff]
Sep  7 21:28:49 pelle kernel: [    0.217607] pci 0000:00:02.1: reg 10 32bit mmio: [0x58400000-0x5847ffff]
Sep  7 21:28:49 pelle kernel: [    0.217772] pci 0000:00:1b.0: reg 10 64bit mmio: [0x58540000-0x58543fff]
Sep  7 21:28:49 pelle kernel: [    0.217856] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep  7 21:28:49 pelle kernel: [    0.217867] pci 0000:00:1b.0: PME# disabled
Sep  7 21:28:49 pelle kernel: [    0.217995] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep  7 21:28:49 pelle kernel: [    0.218006] pci 0000:00:1c.0: PME# disabled
Sep  7 21:28:49 pelle kernel: [    0.218138] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep  7 21:28:49 pelle kernel: [    0.218149] pci 0000:00:1c.1: PME# disabled
Sep  7 21:28:49 pelle kernel: [    0.218283] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Sep  7 21:28:49 pelle kernel: [    0.218295] pci 0000:00:1c.2: PME# disabled
Sep  7 21:28:49 pelle kernel: [    0.218442] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Sep  7 21:28:49 pelle kernel: [    0.218454] pci 0000:00:1c.3: PME# disabled
Sep  7 21:28:49 pelle kernel: [    0.218549] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
Sep  7 21:28:49 pelle kernel: [    0.218643] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
Sep  7 21:28:49 pelle kernel: [    0.218734] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
Sep  7 21:28:49 pelle kernel: [    0.218825] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
Sep  7 21:28:49 pelle kernel: [    0.218922] pci 0000:00:1d.7: reg 10 32bit mmio: [0x58544400-0x585447ff]
Sep  7 21:28:49 pelle kernel: [    0.219006] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Sep  7 21:28:49 pelle kernel: [    0.219017] pci 0000:00:1d.7: PME# disabled
Sep  7 21:28:49 pelle kernel: [    0.219266] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Sep  7 21:28:49 pelle kernel: [    0.219279] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Sep  7 21:28:49 pelle kernel: [    0.219299] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
Sep  7 21:28:49 pelle kernel: [    0.219393] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
Sep  7 21:28:49 pelle kernel: [    0.219409] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
Sep  7 21:28:49 pelle kernel: [    0.219423] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
Sep  7 21:28:49 pelle kernel: [    0.219438] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
Sep  7 21:28:49 pelle kernel: [    0.219454] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
Sep  7 21:28:49 pelle kernel: [    0.219505] pci 0000:00:1f.2: PME# supported from D3hot
Sep  7 21:28:49 pelle kernel: [    0.219515] pci 0000:00:1f.2: PME# disabled
Sep  7 21:28:49 pelle kernel: [    0.219601] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
Sep  7 21:28:49 pelle kernel: [    0.219732] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
Sep  7 21:28:49 pelle kernel: [    0.219744] pci 0000:00:1c.0: bridge 32bit mmio: [0x57300000-0x583fffff]
Sep  7 21:28:49 pelle kernel: [    0.219760] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
Sep  7 21:28:49 pelle kernel: [    0.219848] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
Sep  7 21:28:49 pelle kernel: [    0.219886] pci 0000:02:00.0: reg 18 64bit mmio pref: [0x51010000-0x51010fff]
Sep  7 21:28:49 pelle kernel: [    0.219914] pci 0000:02:00.0: reg 20 64bit mmio pref: [0x51000000-0x5100ffff]
Sep  7 21:28:49 pelle kernel: [    0.219933] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
Sep  7 21:28:49 pelle kernel: [    0.220045] pci 0000:02:00.0: supports D1 D2
Sep  7 21:28:49 pelle kernel: [    0.220053] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep  7 21:28:49 pelle kernel: [    0.220066] pci 0000:02:00.0: PME# disabled
Sep  7 21:28:49 pelle kernel: [    0.220180] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
Sep  7 21:28:49 pelle kernel: [    0.220191] pci 0000:00:1c.1: bridge 32bit mmio: [0x56300000-0x572fffff]
Sep  7 21:28:49 pelle kernel: [    0.220207] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
Sep  7 21:28:49 pelle kernel: [    0.220356] pci 0000:03:00.0: reg 10 64bit mmio: [0x55200000-0x5520ffff]
Sep  7 21:28:49 pelle kernel: [    0.220650] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
Sep  7 21:28:49 pelle kernel: [    0.220662] pci 0000:00:1c.2: bridge 32bit mmio: [0x55200000-0x562fffff]
Sep  7 21:28:49 pelle kernel: [    0.220679] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52100000-0x530fffff]
Sep  7 21:28:49 pelle kernel: [    0.220773] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
Sep  7 21:28:49 pelle kernel: [    0.220787] pci 0000:00:1c.3: bridge 32bit mmio: [0x54100000-0x551fffff]
Sep  7 21:28:49 pelle kernel: [    0.220804] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53100000-0x540fffff]
Sep  7 21:28:49 pelle kernel: [    0.220902] pci 0000:00:1e.0: transparent bridge
Sep  7 21:28:49 pelle kernel: [    0.220964] pci_bus 0000:00: on NUMA node 0
Sep  7 21:28:49 pelle kernel: [    0.220986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep  7 21:28:49 pelle kernel: [    0.221480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
Sep  7 21:28:49 pelle kernel: [    0.221892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
Sep  7 21:28:49 pelle kernel: [    0.222181] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
Sep  7 21:28:49 pelle kernel: [    0.222410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
Sep  7 21:28:49 pelle kernel: [    0.222652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
Sep  7 21:28:49 pelle kernel: [    0.223225] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.223245] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.235840] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Sep  7 21:28:49 pelle kernel: [    0.236212] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
Sep  7 21:28:49 pelle kernel: [    0.236518] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Sep  7 21:28:49 pelle kernel: [    0.236820] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Sep  7 21:28:49 pelle kernel: [    0.237137] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  7 21:28:49 pelle kernel: [    0.237445] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  7 21:28:49 pelle kernel: [    0.237754] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  7 21:28:49 pelle kernel: [    0.238078] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  7 21:28:49 pelle kernel: [    0.238438] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep  7 21:28:49 pelle kernel: [    0.238471] vgaarb: loaded
Sep  7 21:28:49 pelle kernel: [    0.238833] SCSI subsystem initialized
Sep  7 21:28:49 pelle kernel: [    0.239079] libata version 3.00 loaded.
Sep  7 21:28:49 pelle kernel: [    0.239319] usbcore: registered new interface driver usbfs
Sep  7 21:28:49 pelle kernel: [    0.239372] usbcore: registered new interface driver hub
Sep  7 21:28:49 pelle kernel: [    0.239463] usbcore: registered new device driver usb
Sep  7 21:28:49 pelle kernel: [    0.240186] ACPI: WMI: Mapper loaded
Sep  7 21:28:49 pelle kernel: [    0.240193] PCI: Using ACPI for IRQ routing
Sep  7 21:28:49 pelle kernel: [    0.240620] NetLabel: Initializing
Sep  7 21:28:49 pelle kernel: [    0.240627] NetLabel:  domain hash size = 128
Sep  7 21:28:49 pelle kernel: [    0.240632] NetLabel:  protocols = UNLABELED CIPSOv4
Sep  7 21:28:49 pelle kernel: [    0.240665] NetLabel:  unlabeled traffic allowed by default
Sep  7 21:28:49 pelle kernel: [    0.240783] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep  7 21:28:49 pelle kernel: [    0.240799] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Sep  7 21:28:49 pelle kernel: [    0.244455] Switching to clocksource tsc
Sep  7 21:28:49 pelle kernel: [    0.249019] AppArmor: AppArmor Filesystem Enabled
Sep  7 21:28:49 pelle kernel: [    0.249062] pnp: PnP ACPI init
Sep  7 21:28:49 pelle kernel: [    0.249105] ACPI: bus type pnp registered
Sep  7 21:28:49 pelle kernel: [    0.251797] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
Sep  7 21:28:49 pelle kernel: [    0.253508] pnp: PnP ACPI: found 9 devices
Sep  7 21:28:49 pelle kernel: [    0.253516] ACPI: ACPI bus type pnp unregistered
Sep  7 21:28:49 pelle kernel: [    0.253525] PnPBIOS: Disabled by ACPI PNP
Sep  7 21:28:49 pelle kernel: [    0.253560] system 00:01: ioport range 0x200-0x20f has been reserved
Sep  7 21:28:49 pelle kernel: [    0.253572] system 00:01: ioport range 0x600-0x60f has been reserved
Sep  7 21:28:49 pelle kernel: [    0.253581] system 00:01: ioport range 0x610-0x610 has been reserved
Sep  7 21:28:49 pelle kernel: [    0.253591] system 00:01: ioport range 0x800-0x80f has been reserved
Sep  7 21:28:49 pelle kernel: [    0.253600] system 00:01: ioport range 0x400-0x47f has been reserved
Sep  7 21:28:49 pelle kernel: [    0.253610] system 00:01: ioport range 0x500-0x53f has been reserved
Sep  7 21:28:49 pelle kernel: [    0.253624] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Sep  7 21:28:49 pelle kernel: [    0.253634] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Sep  7 21:28:49 pelle kernel: [    0.253644] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Sep  7 21:28:49 pelle kernel: [    0.253655] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Sep  7 21:28:49 pelle kernel: [    0.253665] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Sep  7 21:28:49 pelle kernel: [    0.253676] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Sep  7 21:28:49 pelle kernel: [    0.253686] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Sep  7 21:28:49 pelle kernel: [    0.288875] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
Sep  7 21:28:49 pelle kernel: [    0.288965] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Sep  7 21:28:49 pelle kernel: [    0.288975] pci 0000:00:1c.0:   IO window: 0x5000-0x5fff
Sep  7 21:28:49 pelle kernel: [    0.288988] pci 0000:00:1c.0:   MEM window: 0x57300000-0x583fffff
Sep  7 21:28:49 pelle kernel: [    0.289000] pci 0000:00:1c.0:   PREFETCH window: 0x00000050000000-0x00000050ffffff
Sep  7 21:28:49 pelle kernel: [    0.289020] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Sep  7 21:28:49 pelle kernel: [    0.289030] pci 0000:00:1c.1:   IO window: 0x3000-0x4fff
Sep  7 21:28:49 pelle kernel: [    0.289042] pci 0000:00:1c.1:   MEM window: 0x56300000-0x572fffff
Sep  7 21:28:49 pelle kernel: [    0.289054] pci 0000:00:1c.1:   PREFETCH window: 0x00000051000000-0x000000520fffff
Sep  7 21:28:49 pelle kernel: [    0.289069] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
Sep  7 21:28:49 pelle kernel: [    0.289079] pci 0000:00:1c.2:   IO window: 0x2000-0x2fff
Sep  7 21:28:49 pelle kernel: [    0.289091] pci 0000:00:1c.2:   MEM window: 0x55200000-0x562fffff
Sep  7 21:28:49 pelle kernel: [    0.289102] pci 0000:00:1c.2:   PREFETCH window: 0x00000052100000-0x000000530fffff
Sep  7 21:28:49 pelle kernel: [    0.289117] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
Sep  7 21:28:49 pelle kernel: [    0.289127] pci 0000:00:1c.3:   IO window: 0x1000-0x1fff
Sep  7 21:28:49 pelle kernel: [    0.289139] pci 0000:00:1c.3:   MEM window: 0x54100000-0x551fffff
Sep  7 21:28:49 pelle kernel: [    0.289151] pci 0000:00:1c.3:   PREFETCH window: 0x00000053100000-0x000000540fffff
Sep  7 21:28:49 pelle kernel: [    0.289166] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
Sep  7 21:28:49 pelle kernel: [    0.289173] pci 0000:00:1e.0:   IO window: disabled
Sep  7 21:28:49 pelle kernel: [    0.289184] pci 0000:00:1e.0:   MEM window: disabled
Sep  7 21:28:49 pelle kernel: [    0.289193] pci 0000:00:1e.0:   PREFETCH window: disabled
Sep  7 21:28:49 pelle kernel: [    0.289233]   alloc irq_desc for 16 on node -1
Sep  7 21:28:49 pelle kernel: [    0.289240]   alloc kstat_irqs on node -1
Sep  7 21:28:49 pelle kernel: [    0.289258] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  7 21:28:49 pelle kernel: [    0.289272] pci 0000:00:1c.0: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.289293]   alloc irq_desc for 17 on node -1
Sep  7 21:28:49 pelle kernel: [    0.289299]   alloc kstat_irqs on node -1
Sep  7 21:28:49 pelle kernel: [    0.289310] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  7 21:28:49 pelle kernel: [    0.289322] pci 0000:00:1c.1: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.289342]   alloc irq_desc for 18 on node -1
Sep  7 21:28:49 pelle kernel: [    0.289347]   alloc kstat_irqs on node -1
Sep  7 21:28:49 pelle kernel: [    0.289359] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  7 21:28:49 pelle kernel: [    0.289370] pci 0000:00:1c.2: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.289390]   alloc irq_desc for 19 on node -1
Sep  7 21:28:49 pelle kernel: [    0.289396]   alloc kstat_irqs on node -1
Sep  7 21:28:49 pelle kernel: [    0.289406] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  7 21:28:49 pelle kernel: [    0.289418] pci 0000:00:1c.3: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.289435] pci 0000:00:1e.0: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.289446] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Sep  7 21:28:49 pelle kernel: [    0.289454] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Sep  7 21:28:49 pelle kernel: [    0.289463] pci_bus 0000:01: resource 0 io:  [0x5000-0x5fff]
Sep  7 21:28:49 pelle kernel: [    0.289472] pci_bus 0000:01: resource 1 mem: [0x57300000-0x583fffff]
Sep  7 21:28:49 pelle kernel: [    0.289481] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
Sep  7 21:28:49 pelle kernel: [    0.289490] pci_bus 0000:02: resource 0 io:  [0x3000-0x4fff]
Sep  7 21:28:49 pelle kernel: [    0.289499] pci_bus 0000:02: resource 1 mem: [0x56300000-0x572fffff]
Sep  7 21:28:49 pelle kernel: [    0.289508] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x520fffff]
Sep  7 21:28:49 pelle kernel: [    0.289516] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
Sep  7 21:28:49 pelle kernel: [    0.289524] pci_bus 0000:03: resource 1 mem: [0x55200000-0x562fffff]
Sep  7 21:28:49 pelle kernel: [    0.289532] pci_bus 0000:03: resource 2 pref mem [0x52100000-0x530fffff]
Sep  7 21:28:49 pelle kernel: [    0.289541] pci_bus 0000:04: resource 0 io:  [0x1000-0x1fff]
Sep  7 21:28:49 pelle kernel: [    0.289551] pci_bus 0000:04: resource 1 mem: [0x54100000-0x551fffff]
Sep  7 21:28:49 pelle kernel: [    0.289560] pci_bus 0000:04: resource 2 pref mem [0x53100000-0x540fffff]
Sep  7 21:28:49 pelle kernel: [    0.289570] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
Sep  7 21:28:49 pelle kernel: [    0.289579] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
Sep  7 21:28:49 pelle kernel: [    0.289680] NET: Registered protocol family 2
Sep  7 21:28:49 pelle kernel: [    0.289961] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep  7 21:28:49 pelle kernel: [    0.290964] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep  7 21:28:49 pelle kernel: [    0.292174] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep  7 21:28:49 pelle kernel: [    0.292733] TCP: Hash tables configured (established 131072 bind 65536)
Sep  7 21:28:49 pelle kernel: [    0.292743] TCP reno registered
Sep  7 21:28:49 pelle kernel: [    0.293074] NET: Registered protocol family 1
Sep  7 21:28:49 pelle kernel: [    0.293133] pci 0000:00:02.0: Boot video device
Sep  7 21:28:49 pelle kernel: [    0.293461] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Sep  7 21:28:49 pelle kernel: [    0.293469] Simple Boot Flag at 0x44 set to 0x1
Sep  7 21:28:49 pelle kernel: [    0.293987] cpufreq-nforce2: No nForce2 chipset.
Sep  7 21:28:49 pelle kernel: [    0.294068] Scanning for low memory corruption every 60 seconds
Sep  7 21:28:49 pelle kernel: [    0.294407] audit: initializing netlink socket (disabled)
Sep  7 21:28:49 pelle kernel: [    0.294436] type=2000 audit(1283884114.290:1): initialized
Sep  7 21:28:49 pelle kernel: [    0.316098] highmem bounce pool size: 64 pages
Sep  7 21:28:49 pelle kernel: [    0.316115] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Sep  7 21:28:49 pelle kernel: [    0.321479] VFS: Disk quotas dquot_6.5.2
Sep  7 21:28:49 pelle kernel: [    0.321678] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep  7 21:28:49 pelle kernel: [    0.323776] fuse init (API version 7.13)
Sep  7 21:28:49 pelle kernel: [    0.324095] msgmni has been set to 1714
Sep  7 21:28:49 pelle kernel: [    0.324802] alg: No test for stdrng (krng)
Sep  7 21:28:49 pelle kernel: [    0.325010] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep  7 21:28:49 pelle kernel: [    0.325020] io scheduler noop registered
Sep  7 21:28:49 pelle kernel: [    0.325026] io scheduler anticipatory registered
Sep  7 21:28:49 pelle kernel: [    0.325032] io scheduler deadline registered
Sep  7 21:28:49 pelle kernel: [    0.325172] io scheduler cfq registered (default)
Sep  7 21:28:49 pelle kernel: [    0.325531]   alloc irq_desc for 24 on node -1
Sep  7 21:28:49 pelle kernel: [    0.325538]   alloc kstat_irqs on node -1
Sep  7 21:28:49 pelle kernel: [    0.325562] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
Sep  7 21:28:49 pelle kernel: [    0.325582] pcieport 0000:00:1c.0: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.325861]   alloc irq_desc for 25 on node -1
Sep  7 21:28:49 pelle kernel: [    0.325867]   alloc kstat_irqs on node -1
Sep  7 21:28:49 pelle kernel: [    0.325885] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
Sep  7 21:28:49 pelle kernel: [    0.325903] pcieport 0000:00:1c.1: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.326183]   alloc irq_desc for 26 on node -1
Sep  7 21:28:49 pelle kernel: [    0.326191]   alloc kstat_irqs on node -1
Sep  7 21:28:49 pelle kernel: [    0.326208] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
Sep  7 21:28:49 pelle kernel: [    0.326227] pcieport 0000:00:1c.2: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.326516]   alloc irq_desc for 27 on node -1
Sep  7 21:28:49 pelle kernel: [    0.326523]   alloc kstat_irqs on node -1
Sep  7 21:28:49 pelle kernel: [    0.326541] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
Sep  7 21:28:49 pelle kernel: [    0.326559] pcieport 0000:00:1c.3: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.326842] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  7 21:28:49 pelle kernel: [    0.327146] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.327172] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.327532] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.327551] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.327874] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.327892] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.328222] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.328242] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.328627] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.328646] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.328976] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.328997] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.329339] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.329359] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.329680] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.329698] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  7 21:28:49 pelle kernel: [    0.329817] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep  7 21:28:49 pelle kernel: [    0.330476] ACPI: AC Adapter [ACAD] (on-line)
Sep  7 21:28:49 pelle kernel: [    0.330775] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Sep  7 21:28:49 pelle kernel: [    0.330787] ACPI: Power Button [PWRB]
Sep  7 21:28:49 pelle kernel: [    0.330926] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Sep  7 21:28:49 pelle kernel: [    0.331326] ACPI: Lid Switch [LID0]
Sep  7 21:28:49 pelle kernel: [    0.331493] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Sep  7 21:28:49 pelle kernel: [    0.331504] ACPI: Sleep Button [SLPB]
Sep  7 21:28:49 pelle kernel: [    0.331682] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Sep  7 21:28:49 pelle kernel: [    0.331691] ACPI: Power Button [PWRF]
Sep  7 21:28:49 pelle kernel: [    0.333594] ACPI: SSDT 3f380c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
Sep  7 21:28:49 pelle kernel: [    0.334668] ACPI: SSDT 3f37fe10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
Sep  7 21:28:49 pelle kernel: [    0.335604] Marking TSC unstable due to TSC halts in idle
Sep  7 21:28:49 pelle kernel: [    0.335860] processor LNXCPU:00: registered as cooling_device0
Sep  7 21:28:49 pelle kernel: [    0.336906] ACPI: SSDT 3f380f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
Sep  7 21:28:49 pelle kernel: [    0.337862] ACPI: SSDT 3f37ef10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
Sep  7 21:28:49 pelle kernel: [    0.338595] Switching to clocksource hpet
Sep  7 21:28:49 pelle kernel: [    0.339179] processor LNXCPU:01: registered as cooling_device1
Sep  7 21:28:49 pelle kernel: [    0.348267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Sep  7 21:28:49 pelle kernel: [    0.352512] brd: module loaded
Sep  7 21:28:49 pelle kernel: [    0.353230] ACPI: Battery Slot [BAT1] (battery absent)
Sep  7 21:28:49 pelle kernel: [    0.353266] isapnp: Scanning for PnP cards...
Sep  7 21:28:49 pelle kernel: [    0.403728] loop: module loaded
Sep  7 21:28:49 pelle kernel: [    0.404029] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Sep  7 21:28:49 pelle kernel: [    0.404307] ata_piix 0000:00:1f.2: version 2.13
Sep  7 21:28:49 pelle kernel: [    0.404346] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  7 21:28:49 pelle kernel: [    0.404359] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Sep  7 21:28:49 pelle kernel: [    0.404450] ata_piix 0000:00:1f.2: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.448221] scsi0 : ata_piix
Sep  7 21:28:49 pelle kernel: [    0.492434] scsi1 : ata_piix
Sep  7 21:28:49 pelle kernel: [    0.495070] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
Sep  7 21:28:49 pelle kernel: [    0.495080] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
Sep  7 21:28:49 pelle kernel: [    0.496243] Fixed MDIO Bus: probed
Sep  7 21:28:49 pelle kernel: [    0.496355] PPP generic driver version 2.4.2
Sep  7 21:28:49 pelle kernel: [    0.496498] tun: Universal TUN/TAP device driver, 1.6
Sep  7 21:28:49 pelle kernel: [    0.496505] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep  7 21:28:49 pelle kernel: [    0.496755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep  7 21:28:49 pelle kernel: [    0.496810] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  7 21:28:49 pelle kernel: [    0.496844] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.496853] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep  7 21:28:49 pelle kernel: [    0.496949] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep  7 21:28:49 pelle kernel: [    0.496994] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Sep  7 21:28:49 pelle kernel: [    0.497017] ehci_hcd 0000:00:1d.7: debug port 1
Sep  7 21:28:49 pelle kernel: [    0.500905] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Sep  7 21:28:49 pelle kernel: [    0.500946] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
Sep  7 21:28:49 pelle kernel: [    0.516207] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Sep  7 21:28:49 pelle kernel: [    0.516537] usb usb1: configuration #1 chosen from 1 choice
Sep  7 21:28:49 pelle kernel: [    0.516627] hub 1-0:1.0: USB hub found
Sep  7 21:28:49 pelle kernel: [    0.516653] hub 1-0:1.0: 8 ports detected
Sep  7 21:28:49 pelle kernel: [    0.516843] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep  7 21:28:49 pelle kernel: [    0.516895] uhci_hcd: USB Universal Host Controller Interface driver
Sep  7 21:28:49 pelle kernel: [    0.516983] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  7 21:28:49 pelle kernel: [    0.517003] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.517012] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep  7 21:28:49 pelle kernel: [    0.517127] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep  7 21:28:49 pelle kernel: [    0.517177] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
Sep  7 21:28:49 pelle kernel: [    0.517432] usb usb2: configuration #1 chosen from 1 choice
Sep  7 21:28:49 pelle kernel: [    0.517524] hub 2-0:1.0: USB hub found
Sep  7 21:28:49 pelle kernel: [    0.517544] hub 2-0:1.0: 2 ports detected
Sep  7 21:28:49 pelle kernel: [    0.517661] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  7 21:28:49 pelle kernel: [    0.517677] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.517685] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep  7 21:28:49 pelle kernel: [    0.517784] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep  7 21:28:49 pelle kernel: [    0.517844] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
Sep  7 21:28:49 pelle kernel: [    0.518098] usb usb3: configuration #1 chosen from 1 choice
Sep  7 21:28:49 pelle kernel: [    0.518195] hub 3-0:1.0: USB hub found
Sep  7 21:28:49 pelle kernel: [    0.518214] hub 3-0:1.0: 2 ports detected
Sep  7 21:28:49 pelle kernel: [    0.518332] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  7 21:28:49 pelle kernel: [    0.518349] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.518358] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep  7 21:28:49 pelle kernel: [    0.518465] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep  7 21:28:49 pelle kernel: [    0.518523] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
Sep  7 21:28:49 pelle kernel: [    0.518787] usb usb4: configuration #1 chosen from 1 choice
Sep  7 21:28:49 pelle kernel: [    0.518867] hub 4-0:1.0: USB hub found
Sep  7 21:28:49 pelle kernel: [    0.518887] hub 4-0:1.0: 2 ports detected
Sep  7 21:28:49 pelle kernel: [    0.518997] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  7 21:28:49 pelle kernel: [    0.519013] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    0.519021] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep  7 21:28:49 pelle kernel: [    0.519113] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep  7 21:28:49 pelle kernel: [    0.519172] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
Sep  7 21:28:49 pelle kernel: [    0.519423] usb usb5: configuration #1 chosen from 1 choice
Sep  7 21:28:49 pelle kernel: [    0.519503] hub 5-0:1.0: USB hub found
Sep  7 21:28:49 pelle kernel: [    0.519521] hub 5-0:1.0: 2 ports detected
Sep  7 21:28:49 pelle kernel: [    0.519761] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Sep  7 21:28:49 pelle kernel: [    0.523694] i8042.c: Warning: Keylock active.
Sep  7 21:28:49 pelle kernel: [    0.543981] i8042.c: Detected active multiplexing controller, rev 1.1.
Sep  7 21:28:49 pelle kernel: [    0.556857] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  7 21:28:49 pelle kernel: [    0.556886] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Sep  7 21:28:49 pelle kernel: [    0.556993] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Sep  7 21:28:49 pelle kernel: [    0.557081] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Sep  7 21:28:49 pelle kernel: [    0.557155] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Sep  7 21:28:49 pelle kernel: [    0.557552] mice: PS/2 mouse device common for all mice
Sep  7 21:28:49 pelle kernel: [    0.557999] rtc_cmos 00:03: RTC can wake from S4
Sep  7 21:28:49 pelle kernel: [    0.558118] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep  7 21:28:49 pelle kernel: [    0.558170] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Sep  7 21:28:49 pelle kernel: [    0.558503] device-mapper: uevent: version 1.0.3
Sep  7 21:28:49 pelle kernel: [    0.579986] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Sep  7 21:28:49 pelle kernel: [    0.581332] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Sep  7 21:28:49 pelle kernel: [    0.616665] device-mapper: multipath: version 1.1.0 loaded
Sep  7 21:28:49 pelle kernel: [    0.616676] device-mapper: multipath round-robin: version 1.0.0 loaded
Sep  7 21:28:49 pelle kernel: [    0.623434] EISA: Probing bus 0 at eisa.0
Sep  7 21:28:49 pelle kernel: [    0.623450] Cannot allocate resource for EISA slot 1
Sep  7 21:28:49 pelle kernel: [    0.623457] Cannot allocate resource for EISA slot 2
Sep  7 21:28:49 pelle kernel: [    0.623464] Cannot allocate resource for EISA slot 3
Sep  7 21:28:49 pelle kernel: [    0.623470] Cannot allocate resource for EISA slot 4
Sep  7 21:28:49 pelle kernel: [    0.623476] Cannot allocate resource for EISA slot 5
Sep  7 21:28:49 pelle kernel: [    0.623483] Cannot allocate resource for EISA slot 6
Sep  7 21:28:49 pelle kernel: [    0.623501] EISA: Detected 0 cards.
Sep  7 21:28:49 pelle kernel: [    0.666990] cpuidle: using governor ladder
Sep  7 21:28:49 pelle kernel: [    0.667334] cpuidle: using governor menu
Sep  7 21:28:49 pelle kernel: [    0.668649] TCP cubic registered
Sep  7 21:28:49 pelle kernel: [    0.669200] NET: Registered protocol family 10
Sep  7 21:28:49 pelle kernel: [    0.670495] lo: Disabled Privacy Extensions
Sep  7 21:28:49 pelle kernel: [    0.671426] NET: Registered protocol family 17
Sep  7 21:28:49 pelle kernel: [    0.672520] Using IPI No-Shortcut mode
Sep  7 21:28:49 pelle kernel: [    0.672780] PM: Resume from disk failed.
Sep  7 21:28:49 pelle kernel: [    0.672819] registered taskstats version 1
Sep  7 21:28:49 pelle kernel: [    0.673561]   Magic number: 10:379:493
Sep  7 21:28:49 pelle kernel: [    0.673717] rtc_cmos 00:03: setting system clock to 2010-09-07 18:28:35 UTC (1283884115)
Sep  7 21:28:49 pelle kernel: [    0.673726] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep  7 21:28:49 pelle kernel: [    0.673732] EDD information not available.
Sep  7 21:28:49 pelle kernel: [    0.694378] Freeing initrd memory: 7784k freed
Sep  7 21:28:49 pelle kernel: [    0.710241] isapnp: No Plug & Play device found
Sep  7 21:28:49 pelle kernel: [    0.710925] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
Sep  7 21:28:49 pelle kernel: [    0.710941] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep  7 21:28:49 pelle kernel: [    0.724900] ata1.00: configured for UDMA/133
Sep  7 21:28:49 pelle kernel: [    0.725304] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
Sep  7 21:28:49 pelle kernel: [    0.725659] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Sep  7 21:28:49 pelle kernel: [    0.725717] sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep  7 21:28:49 pelle kernel: [    0.725846] sd 0:0:0:0: [sda] Write Protect is off
Sep  7 21:28:49 pelle kernel: [    0.725856] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  7 21:28:49 pelle kernel: [    0.725945] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  7 21:28:49 pelle kernel: [    0.726310]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Sep  7 21:28:49 pelle kernel: [    0.798606] sd 0:0:0:0: [sda] Attached SCSI disk
Sep  7 21:28:49 pelle kernel: [    0.798681] Freeing unused kernel memory: 660k freed
Sep  7 21:28:49 pelle kernel: [    0.799265] Write protecting the kernel text: 4680k
Sep  7 21:28:49 pelle kernel: [    0.799347] Write protecting the kernel read-only data: 1844k
Sep  7 21:28:49 pelle kernel: [    0.828136] usb 1-5: new high speed USB device using ehci_hcd and address 2
Sep  7 21:28:49 pelle kernel: [    0.839130] udev: starting version 151
Sep  7 21:28:49 pelle kernel: [    1.027097] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep  7 21:28:49 pelle kernel: [    1.027143] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep  7 21:28:49 pelle kernel: [    1.027224] r8169 0000:02:00.0: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [    1.027304]   alloc irq_desc for 28 on node -1
Sep  7 21:28:49 pelle kernel: [    1.027311]   alloc kstat_irqs on node -1
Sep  7 21:28:49 pelle kernel: [    1.027341] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
Sep  7 21:28:49 pelle kernel: [    1.029489] eth0: RTL8102e at 0xf804e000, 00:23:8b:0a:17:9d, XID 04a00000 IRQ 28
Sep  7 21:28:49 pelle kernel: [    1.172207] usb 1-5: configuration #1 chosen from 1 choice
Sep  7 21:28:49 pelle kernel: [    1.632226] usb 4-2: new full speed USB device using uhci_hcd and address 2
Sep  7 21:28:49 pelle kernel: [    1.659412] EXT4-fs (sda1): mounted filesystem with ordered data mode
Sep  7 21:28:49 pelle kernel: [    1.793982] usb 4-2: configuration #1 chosen from 1 choice
Sep  7 21:28:49 pelle kernel: [   12.844730] udev: starting version 151
Sep  7 21:28:49 pelle kernel: [   12.862946] Adding 975864k swap on /dev/sda5.  Priority:-1 extents:1 across:975864k 
Sep  7 21:28:49 pelle kernel: [   13.200964] lp: driver loaded but no devices found
Sep  7 21:28:49 pelle kernel: [   13.313530] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Sep  7 21:28:49 pelle kernel: [   13.313687] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
Sep  7 21:28:49 pelle kernel: [   13.452675] Linux agpgart interface v0.103
Sep  7 21:28:49 pelle kernel: [   13.544168] intel_rng: FWH not detected
Sep  7 21:28:49 pelle kernel: [   13.636244] acer-wmi: Acer Laptop ACPI-WMI Extras
Sep  7 21:28:49 pelle kernel: [   13.636258] acer-wmi: Blacklisted hardware detected - not loading
Sep  7 21:28:49 pelle kernel: [   13.677232] hso: /build/buildd/linux-2.6.32/drivers/net/usb/hso.c: 1.2 Option Wireless
Sep  7 21:28:49 pelle kernel: [   13.678519] hso0: Disabled Privacy Extensions
Sep  7 21:28:49 pelle kernel: [   13.680243] usbcore: registered new interface driver hso
Sep  7 21:28:49 pelle kernel: [   13.750462] Linux video capture interface: v2.00
Sep  7 21:28:49 pelle kernel: [   13.820351] cfg80211: Calling CRDA to update world regulatory domain
Sep  7 21:28:49 pelle kernel: [   13.830489] type=1505 audit(1283884128.654:2):  operation="profile_load" pid=579 name="/sbin/dhclient3"
Sep  7 21:28:49 pelle kernel: [   13.831271] type=1505 audit(1283884128.654:3):  operation="profile_load" pid=579 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  7 21:28:49 pelle kernel: [   13.831732] type=1505 audit(1283884128.654:4):  operation="profile_load" pid=579 name="/usr/lib/connman/scripts/dhclient-script"
Sep  7 21:28:49 pelle kernel: [   13.835554] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
Sep  7 21:28:49 pelle kernel: [   13.835861] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Sep  7 21:28:49 pelle kernel: [   13.839288] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Sep  7 21:28:49 pelle kernel: [   13.888328] cfg80211: World regulatory domain updated:
Sep  7 21:28:49 pelle kernel: [   13.888341] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep  7 21:28:49 pelle kernel: [   13.888351] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  7 21:28:49 pelle kernel: [   13.888359] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  7 21:28:49 pelle kernel: [   13.888368] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  7 21:28:49 pelle kernel: [   13.888377] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  7 21:28:49 pelle kernel: [   13.888385] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  7 21:28:49 pelle kernel: [   13.914193] acerhdf: Acer Aspire One Fan driver, v.0.5.20
Sep  7 21:28:49 pelle kernel: [   13.914208] acerhdf: Fan control off, to enable do:
Sep  7 21:28:49 pelle kernel: [   13.914214] acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
Sep  7 21:28:49 pelle kernel: [   14.042375] [drm] Initialized drm 1.1.0 20060810
Sep  7 21:28:49 pelle kernel: [   14.085469] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Sep  7 21:28:49 pelle kernel: [   14.092629] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
Sep  7 21:28:49 pelle kernel: [   14.092805] usbcore: registered new interface driver uvcvideo
Sep  7 21:28:49 pelle kernel: [   14.092816] USB Video Class driver (v0.1.0)
Sep  7 21:28:49 pelle kernel: [   14.217309] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Sep  7 21:28:49 pelle kernel: [   14.217349] ath5k 0000:03:00.0: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [   14.217439] ath5k 0000:03:00.0: registered as 'phy0'
Sep  7 21:28:49 pelle kernel: [   14.448286] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  7 21:28:49 pelle kernel: [   14.448299] i915 0000:00:02.0: setting latency timer to 64
Sep  7 21:28:49 pelle kernel: [   14.500044] mtrr: no more MTRRs available
Sep  7 21:28:49 pelle kernel: [   14.500053] [drm] MTRR allocation failed.  Graphics performance may suffer.
Sep  7 21:28:49 pelle kernel: [   14.502491] [drm] set up 7M of stolen space
Sep  7 21:28:49 pelle kernel: [   14.622649] [drm] initialized overlay support
Sep  7 21:28:49 pelle kernel: [   14.718677] ath: EEPROM regdomain: 0x65
Sep  7 21:28:49 pelle kernel: [   14.718683] ath: EEPROM indicates we should expect a direct regpair map
Sep  7 21:28:49 pelle kernel: [   14.718692] ath: Country alpha2 being used: 00
Sep  7 21:28:49 pelle kernel: [   14.718697] ath: Regpair used: 0x65
Sep  7 21:28:49 pelle kernel: [   14.761367] phy0: Selected rate control algorithm 'minstrel'
Sep  7 21:28:49 pelle kernel: [   14.763357] Registered led device: ath5k-phy0::rx
Sep  7 21:28:49 pelle kernel: [   14.763413] Registered led device: ath5k-phy0::tx
Sep  7 21:28:49 pelle kernel: [   14.763422] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Sep  7 21:28:49 pelle NetworkManager: <info>  starting...
Sep  7 21:28:49 pelle kernel: [   15.007923] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
Sep  7 21:28:49 pelle NetworkManager: <info>  Trying to start the modem-manager...
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: init!
Sep  7 21:28:49 pelle kernel: [   15.037045] type=1505 audit(1283884129.862:5):  operation="profile_load" pid=732 name="/usr/share/gdm/guest-session/Xsession"
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Sep  7 21:28:49 pelle NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Sep  7 21:28:49 pelle kernel: [   15.045095] type=1505 audit(1283884129.870:6):  operation="profile_replace" pid=735 name="/sbin/dhclient3"
Sep  7 21:28:49 pelle kernel: [   15.045882] type=1505 audit(1283884129.870:7):  operation="profile_replace" pid=735 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  7 21:28:49 pelle kernel: [   15.046334] type=1505 audit(1283884129.870:8):  operation="profile_replace" pid=735 name="/usr/lib/connman/scripts/dhclient-script"
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0)
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0)
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0)
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0): no ifupdown configuration found.
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: end _init.
Sep  7 21:28:49 pelle NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Sep  7 21:28:49 pelle NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep  7 21:28:49 pelle kernel: [   15.064753] type=1505 audit(1283884129.890:9):  operation="profile_load" pid=736 name="/usr/bin/evince"
Sep  7 21:28:49 pelle NetworkManager: <info>  Found wlan radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill1) (driver <unknown>)
Sep  7 21:28:49 pelle NetworkManager: <info>  Found wwan radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/rfkill/rfkill0) (driver usb)
Sep  7 21:28:49 pelle modem-manager: Loaded plugin MotoC
Sep  7 21:28:49 pelle modem-manager: Loaded plugin Gobi
Sep  7 21:28:49 pelle modem-manager: Loaded plugin Huawei
Sep  7 21:28:49 pelle NetworkManager: <info>  WiFi enabled by radio killswitch; enabled by state file
Sep  7 21:28:49 pelle NetworkManager: <info>  WWAN enabled by radio killswitch; disabled by state file
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: (164922096) ... get_connections.
Sep  7 21:28:49 pelle NetworkManager:    SCPlugin-Ifupdown: (164922096) ... get_connections (managed=false): return empty list.
Sep  7 21:28:49 pelle modem-manager: Loaded plugin Nokia
Sep  7 21:28:49 pelle modem-manager: Loaded plugin ZTE
Sep  7 21:28:49 pelle modem-manager: Loaded plugin Option
Sep  7 21:28:49 pelle kernel: [   15.104768] type=1505 audit(1283884129.930:10):  operation="profile_load" pid=736 name="/usr/bin/evince-previewer"
Sep  7 21:28:49 pelle modem-manager: Loaded plugin Sierra
Sep  7 21:28:49 pelle modem-manager: Loaded plugin Novatel
Sep  7 21:28:49 pelle modem-manager: Loaded plugin Ericsson MBM
Sep  7 21:28:49 pelle modem-manager: Loaded plugin Generic
Sep  7 21:28:49 pelle modem-manager: Loaded plugin Option High-Speed
Sep  7 21:28:49 pelle modem-manager: Loaded plugin AnyData
Sep  7 21:28:49 pelle modem-manager: Loaded plugin Longcheer
Sep  7 21:28:50 pelle kernel: [   15.162390] type=1505 audit(1283884129.986:11):  operation="profile_load" pid=736 name="/usr/bin/evince-thumbnailer"
Sep  7 21:28:50 pelle NetworkManager:    Ifupdown: get unmanaged devices count: 0
Sep  7 21:28:50 pelle kernel: [   15.167353] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Sep  7 21:28:50 pelle NetworkManager: <info>  (eth0): carrier is OFF
Sep  7 21:28:50 pelle NetworkManager: <info>  (eth0): new Ethernet device (driver: 'r8169')
Sep  7 21:28:50 pelle NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep  7 21:28:50 pelle NetworkManager: <info>  (eth0): now managed
Sep  7 21:28:50 pelle NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Sep  7 21:28:50 pelle NetworkManager: <info>  (eth0): bringing up device.
Sep  7 21:28:50 pelle kernel: [   15.196455] r8169: eth0: link down
Sep  7 21:28:50 pelle kernel: [   15.197090] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep  7 21:28:50 pelle NetworkManager: <info>  (eth0): preparing device.
Sep  7 21:28:50 pelle NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Sep  7 21:28:50 pelle NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0
Sep  7 21:28:50 pelle NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
Sep  7 21:28:50 pelle NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'ath5k')
Sep  7 21:28:50 pelle NetworkManager: <info>  (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep  7 21:28:50 pelle NetworkManager: <info>  (wlan0): now managed
Sep  7 21:28:50 pelle NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Sep  7 21:28:50 pelle NetworkManager: <info>  (wlan0): bringing up device.
Sep  7 21:28:50 pelle kernel: [   15.289866] fb0: inteldrmfb frame buffer device
Sep  7 21:28:50 pelle kernel: [   15.289874] registered panic notifier
Sep  7 21:28:50 pelle kernel: [   15.289892] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep  7 21:28:50 pelle kernel: [   15.366688] vga16fb: initializing
Sep  7 21:28:50 pelle kernel: [   15.366700] vga16fb: mapped to 0xc00a0000
Sep  7 21:28:50 pelle kernel: [   15.366710] vga16fb: not registering due to another framebuffer present
Sep  7 21:28:50 pelle modem-manager: (ttyHS0) opening serial device...
Sep  7 21:28:50 pelle modem-manager: (ttyHS0): probe requested by plugin 'Option High-Speed'
Sep  7 21:28:50 pelle modem-manager: (ttyHS1) opening serial device...
Sep  7 21:28:50 pelle modem-manager: (ttyHS1): probe requested by plugin 'Option High-Speed'
Sep  7 21:28:50 pelle modem-manager: (ttyHS2) opening serial device...
Sep  7 21:28:50 pelle modem-manager: (ttyHS2): probe requested by plugin 'Option High-Speed'
Sep  7 21:28:50 pelle modem-manager: (ttyHS3) opening serial device...
Sep  7 21:28:50 pelle modem-manager: (ttyHS3): probe requested by plugin 'Option High-Speed'
Sep  7 21:28:50 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port hso0
Sep  7 21:28:50 pelle modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2
Sep  7 21:28:50 pelle NetworkManager: <info>  (wlan0): preparing device.
Sep  7 21:28:50 pelle NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Sep  7 21:28:50 pelle kernel: [   15.430503] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep  7 21:28:50 pelle NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
Sep  7 21:28:50 pelle kernel: [   15.441110] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  7 21:28:50 pelle kernel: [   15.441180] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep  7 21:28:50 pelle NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Sep  7 21:28:50 pelle NetworkManager: <info>  modem-manager is now available
Sep  7 21:28:50 pelle NetworkManager: <info>  Trying to start the supplicant...
Sep  7 21:28:50 pelle NetworkManager: <info>  (wlan0): supplicant manager state:  down -> idle
Sep  7 21:28:50 pelle NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 0)
Sep  7 21:28:50 pelle NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready
Sep  7 21:28:50 pelle kernel: [   15.571197] Console: switching to colour frame buffer device 128x37
Sep  7 21:28:50 pelle kernel: [   15.586707] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Sep  7 21:28:51 pelle kernel: [   16.393228] ppdev: user-space parallel port driver
Sep  7 21:28:51 pelle kernel: [   17.133334] CPU0 attaching NULL sched-domain.
Sep  7 21:28:51 pelle kernel: [   17.133350] CPU1 attaching NULL sched-domain.
Sep  7 21:28:51 pelle kernel: [   17.157163] CPU0 attaching sched-domain:
Sep  7 21:28:51 pelle kernel: [   17.157174]  domain 0: span 0-1 level SIBLING
Sep  7 21:28:51 pelle kernel: [   17.157183]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  7 21:28:51 pelle kernel: [   17.157202]   domain 1: span 0-1 level MC
Sep  7 21:28:51 pelle kernel: [   17.157210]    groups: 0-1 (cpu_power = 1178)
Sep  7 21:28:51 pelle kernel: [   17.157226] CPU1 attaching sched-domain:
Sep  7 21:28:51 pelle kernel: [   17.157234]  domain 0: span 0-1 level SIBLING
Sep  7 21:28:51 pelle kernel: [   17.157241]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  7 21:28:51 pelle kernel: [   17.157259]   domain 1: span 0-1 level MC
Sep  7 21:28:51 pelle kernel: [   17.157266]    groups: 0-1 (cpu_power = 1178)
Sep  7 21:28:53 pelle modem-manager: (ttyHS0) closing serial device...
Sep  7 21:28:53 pelle modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 as /org/freedesktop/ModemManager/Modems/0
Sep  7 21:28:53 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS0
Sep  7 21:28:53 pelle modem-manager: (ttyHS1) closing serial device...
Sep  7 21:28:53 pelle modem-manager: (ttyHS3) closing serial device...
Sep  7 21:28:53 pelle NetworkManager: <info>  (hso0): new GSM device (driver: 'hso')
Sep  7 21:28:53 pelle NetworkManager: <info>  (hso0): exported as /org/freedesktop/NetworkManager/Devices/2
Sep  7 21:28:53 pelle NetworkManager: <info>  (hso0): now managed
Sep  7 21:28:53 pelle NetworkManager: <info>  (hso0): device state change: 1 -> 2 (reason 2)
Sep  7 21:28:53 pelle NetworkManager: <info>  (hso0): deactivating device (reason: 2).
Sep  7 21:28:53 pelle NetworkManager: <info>  (hso0): device state change: 2 -> 3 (reason 0)
Sep  7 21:28:53 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS1
Sep  7 21:28:53 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS3
Sep  7 21:28:54 pelle kernel: [   20.086321] CPU0 attaching NULL sched-domain.
Sep  7 21:28:54 pelle kernel: [   20.086337] CPU1 attaching NULL sched-domain.
Sep  7 21:28:54 pelle kernel: [   20.109189] CPU0 attaching sched-domain:
Sep  7 21:28:54 pelle kernel: [   20.109202]  domain 0: span 0-1 level SIBLING
Sep  7 21:28:54 pelle kernel: [   20.109211]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  7 21:28:54 pelle kernel: [   20.109230]   domain 1: span 0-1 level MC
Sep  7 21:28:54 pelle kernel: [   20.109238]    groups: 0-1 (cpu_power = 1178)
Sep  7 21:28:54 pelle kernel: [   20.109255] CPU1 attaching sched-domain:
Sep  7 21:28:54 pelle kernel: [   20.109263]  domain 0: span 0-1 level SIBLING
Sep  7 21:28:54 pelle kernel: [   20.109270]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  7 21:28:54 pelle kernel: [   20.109286]   domain 1: span 0-1 level MC
Sep  7 21:28:54 pelle kernel: [   20.109294]    groups: 0-1 (cpu_power = 1178)
Sep  7 21:29:04 pelle modem-manager: (ttyHS2) closing serial device...
Sep  7 21:29:05 pelle NetworkManager: <info>  Activation (wlan0) starting connection 'Auto Vappugospel XXL toimisto'
Sep  7 21:29:05 pelle NetworkManager: <info>  (wlan0): device state change: 3 -> 4 (reason 0)
Sep  7 21:29:05 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep  7 21:29:05 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep  7 21:29:05 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep  7 21:29:05 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep  7 21:29:05 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep  7 21:29:05 pelle NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Sep  7 21:29:06 pelle NetworkManager: <info>  Activation (wlan0/wireless): access point 'Auto Vappugospel XXL toimisto' has security, but secrets are required.
Sep  7 21:29:06 pelle NetworkManager: <info>  (wlan0): device state change: 5 -> 6 (reason 0)
Sep  7 21:29:06 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep  7 21:29:16 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep  7 21:29:16 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep  7 21:29:16 pelle NetworkManager: <info>  (wlan0): device state change: 6 -> 4 (reason 0)
Sep  7 21:29:16 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep  7 21:29:16 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep  7 21:29:16 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep  7 21:29:16 pelle NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Sep  7 21:29:16 pelle NetworkManager: <info>  Activation (wlan0/wireless): connection 'Auto Vappugospel XXL toimisto' has security, and secrets exist.  No new secrets needed.
Sep  7 21:29:16 pelle NetworkManager: <info>  Config: added 'ssid' value 'Vappugospel XXL toimisto'
Sep  7 21:29:16 pelle NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Sep  7 21:29:16 pelle NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
Sep  7 21:29:16 pelle NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Sep  7 21:29:16 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  7 21:29:16 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  7 21:29:16 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep  7 21:29:16 pelle NetworkManager: <info>  Config: set interface ap_scan to 1
Sep  7 21:29:16 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  inactive -> scanning
Sep  7 21:29:17 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> associating
Sep  7 21:29:17 pelle kernel: [   42.980773] wlan0: direct probe to AP 00:26:f2:13:42:90 (try 1)
Sep  7 21:29:17 pelle kernel: [   42.980827] wlan0: deauthenticating from 00:26:f2:13:42:90 by local choice (reason=3)
Sep  7 21:29:17 pelle kernel: [   42.980952] wlan0: direct probe to AP 00:26:f2:13:42:90 (try 1)
Sep  7 21:29:17 pelle kernel: [   42.983279] wlan0: direct probe responded
Sep  7 21:29:17 pelle kernel: [   42.983292] wlan0: authenticate with AP 00:26:f2:13:42:90 (try 1)
Sep  7 21:29:17 pelle kernel: [   42.992790] wlan0: authenticated
Sep  7 21:29:17 pelle kernel: [   42.992852] wlan0: associate with AP 00:26:f2:13:42:90 (try 1)
Sep  7 21:29:17 pelle kernel: [   42.995078] wlan0: RX AssocResp from 00:26:f2:13:42:90 (capab=0x411 status=0 aid=2)
Sep  7 21:29:17 pelle kernel: [   42.995089] wlan0: associated
Sep  7 21:29:17 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  associating -> associated
Sep  7 21:29:17 pelle kernel: [   42.997180] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sep  7 21:29:17 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  associated -> 4-way handshake
Sep  7 21:29:17 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  4-way handshake -> group handshake
Sep  7 21:29:17 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  group handshake -> completed
Sep  7 21:29:17 pelle NetworkManager: <info>  Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'Vappugospel XXL toimisto'.
Sep  7 21:29:17 pelle NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Sep  7 21:29:17 pelle NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Sep  7 21:29:17 pelle NetworkManager: <info>  (wlan0): device state change: 5 -> 7 (reason 0)
Sep  7 21:29:17 pelle NetworkManager: <info>  Activation (wlan0) Beginning DHCP transaction (timeout in 45 seconds)
Sep  7 21:29:17 pelle NetworkManager: <info>  dhclient started with pid 1421
Sep  7 21:29:17 pelle NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) scheduled...
Sep  7 21:29:17 pelle NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Sep  7 21:29:17 pelle NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) started...
Sep  7 21:29:17 pelle NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) complete.
Sep  7 21:29:17 pelle dhclient: Internet Systems Consortium DHCP Client V3.1.3
Sep  7 21:29:17 pelle dhclient: Copyright 2004-2009 Internet Systems Consortium.
Sep  7 21:29:17 pelle dhclient: All rights reserved.
Sep  7 21:29:17 pelle dhclient: For info, please visit https://www.isc.org/software/dhcp/
Sep  7 21:29:17 pelle dhclient: 
Sep  7 21:29:17 pelle NetworkManager: <info>  DHCP: device wlan0 state changed (null) -> preinit
Sep  7 21:29:17 pelle dhclient: Listening on LPF/wlan0/00:23:4d:b0:28:fb
Sep  7 21:29:17 pelle dhclient: Sending on   LPF/wlan0/00:23:4d:b0:28:fb
Sep  7 21:29:17 pelle dhclient: Sending on   Socket/fallback
Sep  7 21:29:21 pelle dhclient: DHCPREQUEST of 192.168.1.2 on wlan0 to 255.255.255.255 port 67
Sep  7 21:29:21 pelle dhclient: DHCPACK of 192.168.1.2 from 192.168.1.1
Sep  7 21:29:21 pelle dhclient: bound to 192.168.1.2 -- renewal in 36039 seconds.
Sep  7 21:29:21 pelle NetworkManager: <info>  DHCP: device wlan0 state changed preinit -> reboot
Sep  7 21:29:21 pelle NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Sep  7 21:29:21 pelle NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Sep  7 21:29:21 pelle NetworkManager: <info>    address 192.168.1.2
Sep  7 21:29:21 pelle NetworkManager: <info>    prefix 24 (255.255.255.0)
Sep  7 21:29:21 pelle NetworkManager: <info>    gateway 192.168.1.1
Sep  7 21:29:21 pelle NetworkManager: <info>    nameserver '192.168.1.1'
Sep  7 21:29:21 pelle NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Sep  7 21:29:21 pelle NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Sep  7 21:29:21 pelle NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Sep  7 21:29:22 pelle NetworkManager: <info>  (wlan0): device state change: 7 -> 8 (reason 0)
Sep  7 21:29:22 pelle NetworkManager: <info>  Policy set 'Auto Vappugospel XXL toimisto' (wlan0) as default for routing and DNS.
Sep  7 21:29:22 pelle NetworkManager: <info>  Activation (wlan0) successful, device activated.
Sep  7 21:29:22 pelle NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Sep  7 21:29:28 pelle kernel: [   53.652061] wlan0: no IPv6 routers present
Sep  7 22:16:04 pelle kernel: [ 2849.354090] ath5k phy0: unsupported jumbo
Sep  7 22:54:39 pelle kernel: [ 5164.252065] CE: hpet increasing min_delta_ns to 15000 nsec
Sep  7 23:01:32 pelle kernel: [ 5577.490122] udev: starting version 151
Sep  7 23:45:50 pelle kernel: [ 8236.076887] CE: hpet increasing min_delta_ns to 22500 nsec
Sep  8 00:02:22 pelle kernel: [ 9227.947073] ath5k phy0: noise floor calibration timeout (2427MHz)
Sep  8 00:02:22 pelle kernel: [ 9228.057125] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:22 pelle kernel: [ 9228.057137] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:23 pelle kernel: [ 9228.402735] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:23 pelle kernel: [ 9228.402761] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:23 pelle kernel: [ 9228.452457] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:23 pelle kernel: [ 9228.452473] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:23 pelle kernel: [ 9228.798853] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:23 pelle kernel: [ 9228.798869] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:23 pelle kernel: [ 9228.845327] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:29 pelle kernel: [ 9234.445094] No probe response from AP 00:26:f2:13:42:90 after 500ms, disconnecting.
Sep  8 00:02:29 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  completed -> disconnected
Sep  8 00:02:29 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  disconnected -> scanning
Sep  8 00:02:29 pelle kernel: [ 9234.750298] __ratelimit: 31 callbacks suppressed
Sep  8 00:02:29 pelle kernel: [ 9234.750310] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:29 pelle kernel: [ 9234.750321] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:29 pelle kernel: [ 9234.799837] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:29 pelle kernel: [ 9234.799849] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:29 pelle kernel: [ 9234.846260] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:29 pelle kernel: [ 9234.846272] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:29 pelle kernel: [ 9234.892614] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:29 pelle kernel: [ 9234.892626] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:29 pelle kernel: [ 9234.939130] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:29 pelle kernel: [ 9234.939156] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:30 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> associating
Sep  8 00:02:30 pelle kernel: [ 9235.471510] wlan0: direct probe to AP 00:26:f2:13:42:90 (try 1)
Sep  8 00:02:30 pelle kernel: [ 9235.669011] wlan0: direct probe to AP 00:26:f2:13:42:90 (try 2)
Sep  8 00:02:30 pelle kernel: [ 9235.868785] wlan0: direct probe to AP 00:26:f2:13:42:90 (try 3)
Sep  8 00:02:30 pelle kernel: [ 9236.069156] wlan0: direct probe to AP 00:26:f2:13:42:90 timed out
Sep  8 00:02:33 pelle NetworkManager: <debug> [1283893353.003549] periodic_update(): Roamed from BSSID 00:26:F2:13:42:90 (Vappugospel XXL toimisto) to (none) ((none))
Sep  8 00:02:35 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  associating -> disconnected
Sep  8 00:02:35 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  disconnected -> scanning
Sep  8 00:02:35 pelle kernel: [ 9240.650782] __ratelimit: 20 callbacks suppressed
Sep  8 00:02:35 pelle kernel: [ 9240.650797] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:35 pelle kernel: [ 9240.650811] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:35 pelle kernel: [ 9240.697330] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:35 pelle kernel: [ 9240.697349] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:35 pelle kernel: [ 9240.743603] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:35 pelle kernel: [ 9240.743615] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:35 pelle kernel: [ 9240.790067] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:35 pelle kernel: [ 9240.790086] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:35 pelle kernel: [ 9240.836839] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:35 pelle kernel: [ 9240.836858] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:41 pelle kernel: [ 9246.383773] __ratelimit: 18 callbacks suppressed
Sep  8 00:02:41 pelle kernel: [ 9246.383794] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:41 pelle kernel: [ 9246.383814] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:41 pelle kernel: [ 9246.432250] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:41 pelle kernel: [ 9246.432271] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:41 pelle kernel: [ 9246.478526] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:41 pelle kernel: [ 9246.478541] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:41 pelle kernel: [ 9246.525742] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:41 pelle kernel: [ 9246.525762] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:41 pelle kernel: [ 9246.572224] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:41 pelle kernel: [ 9246.572236] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:45 pelle NetworkManager: <info>  (wlan0): device state change: 8 -> 3 (reason 11)
Sep  8 00:02:45 pelle NetworkManager: <info>  (wlan0): deactivating device (reason: 11).
Sep  8 00:02:45 pelle NetworkManager: <info>  (wlan0): canceled DHCP transaction, dhcp client pid 1421
Sep  8 00:02:45 pelle NetworkManager: <WARN>  check_one_route(): (wlan0) error -34 returned from rtnl_route_del(): Sucess#012
Sep  8 00:02:45 pelle NetworkManager: <info>  Activation (wlan0) starting connection 'Auto Vappugospel XXL toimisto'
Sep  8 00:02:45 pelle NetworkManager: <info>  (wlan0): device state change: 3 -> 4 (reason 0)
Sep  8 00:02:45 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep  8 00:02:45 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> disconnected
Sep  8 00:02:45 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep  8 00:02:45 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep  8 00:02:45 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep  8 00:02:45 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep  8 00:02:45 pelle NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Sep  8 00:02:45 pelle NetworkManager: <info>  Activation (wlan0/wireless): connection 'Auto Vappugospel XXL toimisto' has security, and secrets exist.  No new secrets needed.
Sep  8 00:02:45 pelle NetworkManager: <info>  Config: added 'ssid' value 'Vappugospel XXL toimisto'
Sep  8 00:02:45 pelle NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Sep  8 00:02:45 pelle NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
Sep  8 00:02:45 pelle NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Sep  8 00:02:45 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  8 00:02:45 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  8 00:02:45 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep  8 00:02:45 pelle NetworkManager: <info>  Config: set interface ap_scan to 1
Sep  8 00:02:46 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  disconnected -> scanning
Sep  8 00:02:46 pelle kernel: [ 9252.118412] __ratelimit: 18 callbacks suppressed
Sep  8 00:02:46 pelle kernel: [ 9252.118420] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:46 pelle kernel: [ 9252.118428] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:47 pelle kernel: [ 9252.165347] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:47 pelle kernel: [ 9252.165362] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:47 pelle kernel: [ 9252.214036] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:47 pelle kernel: [ 9252.214048] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:47 pelle kernel: [ 9252.260710] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:47 pelle kernel: [ 9252.260730] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:47 pelle kernel: [ 9252.307097] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:47 pelle kernel: [ 9252.307110] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:52 pelle kernel: [ 9257.862712] __ratelimit: 18 callbacks suppressed
Sep  8 00:02:52 pelle kernel: [ 9257.862726] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:52 pelle kernel: [ 9257.862740] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:52 pelle kernel: [ 9257.910009] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:52 pelle kernel: [ 9257.910036] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:52 pelle kernel: [ 9257.956716] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:52 pelle kernel: [ 9257.956731] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:52 pelle kernel: [ 9258.003256] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:52 pelle kernel: [ 9258.003276] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:52 pelle kernel: [ 9258.049529] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:52 pelle kernel: [ 9258.049541] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:58 pelle kernel: [ 9263.606446] __ratelimit: 18 callbacks suppressed
Sep  8 00:02:58 pelle kernel: [ 9263.606460] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:58 pelle kernel: [ 9263.606475] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:58 pelle kernel: [ 9263.653009] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:58 pelle kernel: [ 9263.653025] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:58 pelle kernel: [ 9263.699460] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:58 pelle kernel: [ 9263.699476] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:58 pelle kernel: [ 9263.745733] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:58 pelle kernel: [ 9263.745748] ath5k phy0: can't reset hardware (-5)
Sep  8 00:02:58 pelle kernel: [ 9263.792598] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:02:58 pelle kernel: [ 9263.792611] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:04 pelle kernel: [ 9269.350500] __ratelimit: 18 callbacks suppressed
Sep  8 00:03:04 pelle kernel: [ 9269.350514] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:04 pelle kernel: [ 9269.350529] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:04 pelle kernel: [ 9269.397875] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:04 pelle kernel: [ 9269.397902] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:04 pelle kernel: [ 9269.447996] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:04 pelle kernel: [ 9269.448010] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:04 pelle kernel: [ 9269.494317] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:04 pelle kernel: [ 9269.494329] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:04 pelle kernel: [ 9269.540859] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:04 pelle kernel: [ 9269.540870] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:09 pelle kernel: [ 9275.095365] __ratelimit: 18 callbacks suppressed
Sep  8 00:03:09 pelle kernel: [ 9275.095372] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:09 pelle kernel: [ 9275.095380] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:09 pelle kernel: [ 9275.141578] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:09 pelle kernel: [ 9275.141590] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:10 pelle kernel: [ 9275.187788] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:10 pelle kernel: [ 9275.187800] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:10 pelle kernel: [ 9275.234540] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:10 pelle kernel: [ 9275.234564] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:10 pelle kernel: [ 9275.284045] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:10 pelle kernel: [ 9275.284065] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:11 pelle NetworkManager: <info>  (wlan0): device state change: 5 -> 3 (reason 39)
Sep  8 00:03:11 pelle NetworkManager: <info>  (wlan0): deactivating device (reason: 39).
Sep  8 00:03:15 pelle NetworkManager: <info>  Activation (wlan0) starting connection 'Auto Vappugospel XXL toimisto'
Sep  8 00:03:15 pelle NetworkManager: <info>  (wlan0): device state change: 3 -> 4 (reason 0)
Sep  8 00:03:15 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep  8 00:03:15 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep  8 00:03:15 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep  8 00:03:15 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep  8 00:03:15 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep  8 00:03:15 pelle NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Sep  8 00:03:15 pelle NetworkManager: <info>  Activation (wlan0/wireless): connection 'Auto Vappugospel XXL toimisto' has security, and secrets exist.  No new secrets needed.
Sep  8 00:03:15 pelle NetworkManager: <info>  Config: added 'ssid' value 'Vappugospel XXL toimisto'
Sep  8 00:03:15 pelle NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Sep  8 00:03:15 pelle NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
Sep  8 00:03:15 pelle NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Sep  8 00:03:15 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  8 00:03:15 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  8 00:03:15 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep  8 00:03:15 pelle NetworkManager: <info>  Config: set interface ap_scan to 1
Sep  8 00:03:16 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  disconnected -> scanning
Sep  8 00:03:16 pelle kernel: [ 9281.443464] __ratelimit: 18 callbacks suppressed
Sep  8 00:03:16 pelle kernel: [ 9281.443474] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:16 pelle kernel: [ 9281.443484] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:16 pelle kernel: [ 9281.490288] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:16 pelle kernel: [ 9281.490300] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:16 pelle kernel: [ 9281.536803] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:16 pelle kernel: [ 9281.536829] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:16 pelle kernel: [ 9281.583135] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:16 pelle kernel: [ 9281.583147] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:16 pelle kernel: [ 9281.629619] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:16 pelle kernel: [ 9281.629638] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:22 pelle kernel: [ 9287.183461] __ratelimit: 18 callbacks suppressed
Sep  8 00:03:22 pelle kernel: [ 9287.183482] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:22 pelle kernel: [ 9287.183502] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:22 pelle kernel: [ 9287.233494] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:22 pelle kernel: [ 9287.233522] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:22 pelle kernel: [ 9287.280186] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:22 pelle kernel: [ 9287.280206] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:22 pelle kernel: [ 9287.326568] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:22 pelle kernel: [ 9287.326588] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:22 pelle kernel: [ 9287.374099] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:22 pelle kernel: [ 9287.374125] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:27 pelle kernel: [ 9292.922539] __ratelimit: 18 callbacks suppressed
Sep  8 00:03:27 pelle kernel: [ 9292.922554] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:27 pelle kernel: [ 9292.922569] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:27 pelle kernel: [ 9292.968924] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:27 pelle kernel: [ 9292.968944] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:27 pelle kernel: [ 9293.015717] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:27 pelle kernel: [ 9293.015728] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:27 pelle kernel: [ 9293.062062] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:27 pelle kernel: [ 9293.062081] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:27 pelle kernel: [ 9293.108660] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:27 pelle kernel: [ 9293.108680] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:33 pelle kernel: [ 9298.658557] __ratelimit: 18 callbacks suppressed
Sep  8 00:03:33 pelle kernel: [ 9298.658571] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:33 pelle kernel: [ 9298.658585] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:33 pelle kernel: [ 9298.705959] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:33 pelle kernel: [ 9298.705979] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:33 pelle kernel: [ 9298.752275] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:33 pelle kernel: [ 9298.752286] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:33 pelle kernel: [ 9298.798695] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:33 pelle kernel: [ 9298.798714] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:33 pelle kernel: [ 9298.845501] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:33 pelle kernel: [ 9298.845527] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:39 pelle kernel: [ 9304.399499] __ratelimit: 18 callbacks suppressed
Sep  8 00:03:39 pelle kernel: [ 9304.399514] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:39 pelle kernel: [ 9304.399528] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:39 pelle kernel: [ 9304.446937] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:39 pelle kernel: [ 9304.446957] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:39 pelle kernel: [ 9304.493169] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:39 pelle kernel: [ 9304.493181] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:39 pelle kernel: [ 9304.539633] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:39 pelle kernel: [ 9304.539653] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:39 pelle kernel: [ 9304.585867] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:39 pelle kernel: [ 9304.585879] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:44 pelle kernel: [ 9310.134571] __ratelimit: 18 callbacks suppressed
Sep  8 00:03:44 pelle kernel: [ 9310.134591] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:44 pelle kernel: [ 9310.134610] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:45 pelle kernel: [ 9310.182321] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:45 pelle kernel: [ 9310.182333] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:45 pelle kernel: [ 9310.228678] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:45 pelle kernel: [ 9310.228705] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:45 pelle kernel: [ 9310.277616] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:45 pelle kernel: [ 9310.277636] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:45 pelle kernel: [ 9310.323886] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:45 pelle kernel: [ 9310.323899] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:50 pelle kernel: [ 9315.876910] __ratelimit: 18 callbacks suppressed
Sep  8 00:03:50 pelle kernel: [ 9315.876925] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:50 pelle kernel: [ 9315.876940] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:50 pelle kernel: [ 9315.924756] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:50 pelle kernel: [ 9315.924782] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:50 pelle kernel: [ 9315.971412] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:50 pelle kernel: [ 9315.971432] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:50 pelle kernel: [ 9316.018033] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:50 pelle kernel: [ 9316.018052] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:50 pelle kernel: [ 9316.064492] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:50 pelle kernel: [ 9316.064511] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:56 pelle kernel: [ 9321.610657] __ratelimit: 18 callbacks suppressed
Sep  8 00:03:56 pelle kernel: [ 9321.610671] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:56 pelle kernel: [ 9321.610686] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:56 pelle kernel: [ 9321.657603] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:56 pelle kernel: [ 9321.657623] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:56 pelle kernel: [ 9321.704368] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:56 pelle kernel: [ 9321.704388] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:56 pelle kernel: [ 9321.750935] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:56 pelle kernel: [ 9321.750960] ath5k phy0: can't reset hardware (-5)
Sep  8 00:03:56 pelle kernel: [ 9321.800200] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:03:56 pelle kernel: [ 9321.800220] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:02 pelle kernel: [ 9327.359707] __ratelimit: 18 callbacks suppressed
Sep  8 00:04:02 pelle kernel: [ 9327.359721] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:02 pelle kernel: [ 9327.359735] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:02 pelle kernel: [ 9327.406223] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:02 pelle kernel: [ 9327.406243] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:02 pelle kernel: [ 9327.452439] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:02 pelle kernel: [ 9327.452451] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:02 pelle kernel: [ 9327.498937] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:02 pelle kernel: [ 9327.498957] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:02 pelle kernel: [ 9327.545184] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:02 pelle kernel: [ 9327.545196] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:07 pelle kernel: [ 9333.099554] __ratelimit: 18 callbacks suppressed
Sep  8 00:04:07 pelle kernel: [ 9333.099574] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:07 pelle kernel: [ 9333.099593] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:07 pelle kernel: [ 9333.149667] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:07 pelle kernel: [ 9333.149694] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:08 pelle kernel: [ 9333.196070] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:08 pelle kernel: [ 9333.196086] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:08 pelle kernel: [ 9333.242290] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:08 pelle kernel: [ 9333.242302] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:08 pelle kernel: [ 9333.288820] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:08 pelle kernel: [ 9333.288840] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:13 pelle kernel: [ 9338.835529] __ratelimit: 18 callbacks suppressed
Sep  8 00:04:13 pelle kernel: [ 9338.835543] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:13 pelle kernel: [ 9338.835557] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:13 pelle kernel: [ 9338.882373] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:13 pelle kernel: [ 9338.882385] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:13 pelle kernel: [ 9338.928713] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:13 pelle kernel: [ 9338.928744] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:13 pelle kernel: [ 9338.975233] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:13 pelle kernel: [ 9338.975259] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:13 pelle kernel: [ 9339.021544] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:13 pelle kernel: [ 9339.021556] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:16 pelle NetworkManager: <info>  Activation (wlan0/wireless): association took too long.
Sep  8 00:04:16 pelle NetworkManager: <info>  (wlan0): device state change: 5 -> 6 (reason 0)
Sep  8 00:04:16 pelle NetworkManager: <info>  Activation (wlan0/wireless): asking for new secrets
Sep  8 00:04:16 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> disconnected
Sep  8 00:04:21 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep  8 00:04:21 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep  8 00:04:21 pelle NetworkManager: <info>  (wlan0): device state change: 6 -> 4 (reason 0)
Sep  8 00:04:21 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep  8 00:04:21 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep  8 00:04:21 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep  8 00:04:21 pelle NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Sep  8 00:04:21 pelle NetworkManager: <info>  Activation (wlan0/wireless): connection 'Auto Vappugospel XXL toimisto' has security, and secrets exist.  No new secrets needed.
Sep  8 00:04:21 pelle NetworkManager: <info>  Config: added 'ssid' value 'Vappugospel XXL toimisto'
Sep  8 00:04:21 pelle NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Sep  8 00:04:21 pelle NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
Sep  8 00:04:21 pelle NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Sep  8 00:04:21 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  8 00:04:21 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  8 00:04:21 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep  8 00:04:21 pelle NetworkManager: <info>  Config: set interface ap_scan to 1
Sep  8 00:04:21 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  disconnected -> scanning
Sep  8 00:04:21 pelle kernel: [ 9346.855325] __ratelimit: 18 callbacks suppressed
Sep  8 00:04:21 pelle kernel: [ 9346.855336] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:21 pelle kernel: [ 9346.855346] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:21 pelle kernel: [ 9346.901962] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:21 pelle kernel: [ 9346.901978] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:21 pelle kernel: [ 9346.951903] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:21 pelle kernel: [ 9346.951918] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:21 pelle kernel: [ 9347.003195] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:21 pelle kernel: [ 9347.003210] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:21 pelle kernel: [ 9347.052451] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:21 pelle kernel: [ 9347.052466] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:27 pelle kernel: [ 9352.619672] __ratelimit: 18 callbacks suppressed
Sep  8 00:04:27 pelle kernel: [ 9352.619687] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:27 pelle kernel: [ 9352.619702] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:27 pelle kernel: [ 9352.666706] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:27 pelle kernel: [ 9352.666726] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:27 pelle kernel: [ 9352.713570] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:27 pelle kernel: [ 9352.713590] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:27 pelle kernel: [ 9352.760294] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:27 pelle kernel: [ 9352.760314] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:27 pelle kernel: [ 9352.806983] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:27 pelle kernel: [ 9352.807003] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:33 pelle kernel: [ 9358.358724] __ratelimit: 18 callbacks suppressed
Sep  8 00:04:33 pelle kernel: [ 9358.358736] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:33 pelle kernel: [ 9358.358746] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:33 pelle kernel: [ 9358.404880] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:33 pelle kernel: [ 9358.404891] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:33 pelle kernel: [ 9358.451041] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:33 pelle kernel: [ 9358.451058] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:33 pelle kernel: [ 9358.497200] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:33 pelle kernel: [ 9358.497212] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:33 pelle kernel: [ 9358.543596] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:33 pelle kernel: [ 9358.543616] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:38 pelle kernel: [ 9364.091540] __ratelimit: 18 callbacks suppressed
Sep  8 00:04:38 pelle kernel: [ 9364.091555] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:38 pelle kernel: [ 9364.091569] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:38 pelle kernel: [ 9364.138959] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:38 pelle kernel: [ 9364.138976] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:39 pelle kernel: [ 9364.191138] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:39 pelle kernel: [ 9364.191154] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:39 pelle kernel: [ 9364.244640] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:39 pelle kernel: [ 9364.244655] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:39 pelle kernel: [ 9364.298019] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:39 pelle kernel: [ 9364.298034] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:44 pelle kernel: [ 9369.854611] __ratelimit: 18 callbacks suppressed
Sep  8 00:04:44 pelle kernel: [ 9369.854626] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:44 pelle kernel: [ 9369.854640] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:44 pelle kernel: [ 9369.900941] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:44 pelle kernel: [ 9369.900960] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:44 pelle kernel: [ 9369.947335] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:44 pelle kernel: [ 9369.947361] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:44 pelle kernel: [ 9369.994524] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:44 pelle kernel: [ 9369.994544] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:44 pelle kernel: [ 9370.040891] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:44 pelle kernel: [ 9370.040906] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:50 pelle kernel: [ 9375.590979] __ratelimit: 18 callbacks suppressed
Sep  8 00:04:50 pelle kernel: [ 9375.590994] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:50 pelle kernel: [ 9375.591008] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:50 pelle kernel: [ 9375.637390] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:50 pelle kernel: [ 9375.637410] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:50 pelle kernel: [ 9375.684044] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:50 pelle kernel: [ 9375.684064] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:50 pelle kernel: [ 9375.730448] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:50 pelle kernel: [ 9375.730468] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:50 pelle kernel: [ 9375.776860] ath5k phy0: failed to wakeup the MAC Chip
Sep  8 00:04:50 pelle kernel: [ 9375.776880] ath5k phy0: can't reset hardware (-5)
Sep  8 00:04:54 pelle kernel: Kernel logging (proc) stopped.
Sep  8 00:05:36 pelle kernel: imklog 4.2.0, log source = /proc/kmsg started.
Sep  8 00:05:36 pelle kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep  8 00:05:36 pelle kernel: [    0.000000] Initializing cgroup subsys cpu
Sep  8 00:05:36 pelle kernel: [    0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
Sep  8 00:05:36 pelle kernel: [    0.000000] KERNEL supported cpus:
Sep  8 00:05:36 pelle kernel: [    0.000000]   Intel GenuineIntel
Sep  8 00:05:36 pelle kernel: [    0.000000]   AMD AuthenticAMD
Sep  8 00:05:36 pelle kernel: [    0.000000]   NSC Geode by NSC
Sep  8 00:05:36 pelle kernel: [    0.000000]   Cyrix CyrixInstead
Sep  8 00:05:36 pelle kernel: [    0.000000]   Centaur CentaurHauls
Sep  8 00:05:36 pelle kernel: [    0.000000]   Transmeta GenuineTMx86
Sep  8 00:05:36 pelle kernel: [    0.000000]   Transmeta TransmetaCPU
Sep  8 00:05:36 pelle kernel: [    0.000000]   UMC UMC UMC UMC
Sep  8 00:05:36 pelle kernel: [    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:05:36 pelle kernel: [    0.000000] BIOS-provided physical RAM map:
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000] DMI 2.4 present.
Sep  8 00:05:36 pelle kernel: [    0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
Sep  8 00:05:36 pelle kernel: [    0.000000] MTRR default type: uncachable
Sep  8 00:05:36 pelle kernel: [    0.000000] MTRR fixed ranges enabled:
Sep  8 00:05:36 pelle kernel: [    0.000000]   00000-9FFFF write-back
Sep  8 00:05:36 pelle kernel: [    0.000000]   A0000-BFFFF uncachable
Sep  8 00:05:36 pelle kernel: [    0.000000]   C0000-C7FFF write-protect
Sep  8 00:05:36 pelle kernel: [    0.000000]   C8000-EFFFF uncachable
Sep  8 00:05:36 pelle kernel: [    0.000000]   F0000-FFFFF write-protect
Sep  8 00:05:36 pelle kernel: [    0.000000] MTRR variable ranges enabled:
Sep  8 00:05:36 pelle kernel: [    0.000000]   0 base 0FFFE0000 mask 0FFFE0000 write-protect
Sep  8 00:05:36 pelle kernel: [    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
Sep  8 00:05:36 pelle kernel: [    0.000000]   2 base 000000000 mask 0E0000000 write-back
Sep  8 00:05:36 pelle kernel: [    0.000000]   3 base 020000000 mask 0E0000000 write-back
Sep  8 00:05:36 pelle kernel: [    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
Sep  8 00:05:36 pelle kernel: [    0.000000]   5 base 03F600000 mask 0FFE00000 uncachable
Sep  8 00:05:36 pelle kernel: [    0.000000]   6 base 03F500000 mask 0FFF00000 uncachable
Sep  8 00:05:36 pelle kernel: [    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
Sep  8 00:05:36 pelle kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep  8 00:05:36 pelle kernel: [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000] Scanning 1 areas for low memory corruption
Sep  8 00:05:36 pelle kernel: [    0.000000] modified physical RAM map:
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:05:36 pelle kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Sep  8 00:05:36 pelle kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Sep  8 00:05:36 pelle kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Sep  8 00:05:36 pelle kernel: [    0.000000]  0000000000 - 00377fe000 page 4k
Sep  8 00:05:36 pelle kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 8e2000-9c3000
Sep  8 00:05:36 pelle kernel: [    0.000000] RAMDISK: 2ef3e000 - 2f6d8324
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: RSDP 000fe020 00024 (v02 INTEL )
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: XSDT 3f4fe120 00064 (v01 INTEL  Napa     00000001      01000013)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: FACP 3f4fc000 000F4 (v04 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: DSDT 3f4f2000 05DE4 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: FACS 3f488000 00040
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: SSDT 3f4fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: HPET 3f4fb000 00038 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: APIC 3f4fa000 00068 (v02 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: MCFG 3f4f9000 0003C (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: SLIC 3f4f1000 00180 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: BOOT 3f4f0000 00028 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:05:36 pelle kernel: [    0.000000] 125MB HIGHMEM available.
Sep  8 00:05:36 pelle kernel: [    0.000000] 887MB LOWMEM available.
Sep  8 00:05:36 pelle kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Sep  8 00:05:36 pelle kernel: [    0.000000]   low ram: 0 - 377fe000
Sep  8 00:05:36 pelle kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Sep  8 00:05:36 pelle kernel: [    0.000000]   node 0 bootmap 00007000 - 0000df00
Sep  8 00:05:36 pelle kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Sep  8 00:05:36 pelle kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Sep  8 00:05:36 pelle kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Sep  8 00:05:36 pelle kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Sep  8 00:05:36 pelle kernel: [    0.000000]   #3 [0000100000 - 00008ddeb8]    TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
Sep  8 00:05:36 pelle kernel: [    0.000000]   #4 [002ef3e000 - 002f6d8324]          RAMDISK ==> [002ef3e000 - 002f6d8324]
Sep  8 00:05:36 pelle kernel: [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Sep  8 00:05:36 pelle kernel: [    0.000000]   #6 [00008de000 - 00008e1244]              BRK ==> [00008de000 - 00008e1244]
Sep  8 00:05:36 pelle kernel: [    0.000000]   #7 [00008e2000 - 00009bd000]          PGTABLE ==> [00008e2000 - 00009bd000]
Sep  8 00:05:36 pelle kernel: [    0.000000]   #8 [0000007000 - 000000e000]          BOOTMAP ==> [0000007000 - 000000e000]
Sep  8 00:05:36 pelle kernel: [    0.000000] Zone PFN ranges:
Sep  8 00:05:36 pelle kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Sep  8 00:05:36 pelle kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Sep  8 00:05:36 pelle kernel: [    0.000000]   HighMem  0x000377fe -> 0x0003f500
Sep  8 00:05:36 pelle kernel: [    0.000000] Movable zone start PFN for each node
Sep  8 00:05:36 pelle kernel: [    0.000000] early_node_map[6] active PFN ranges
Sep  8 00:05:36 pelle kernel: [    0.000000]     0: 0x00000000 -> 0x00000002
Sep  8 00:05:36 pelle kernel: [    0.000000]     0: 0x00000006 -> 0x0000009f
Sep  8 00:05:36 pelle kernel: [    0.000000]     0: 0x00000100 -> 0x0003f376
Sep  8 00:05:36 pelle kernel: [    0.000000]     0: 0x0003f3bf -> 0x0003f46d
Sep  8 00:05:36 pelle kernel: [    0.000000]     0: 0x0003f4bf -> 0x0003f4f0
Sep  8 00:05:36 pelle kernel: [    0.000000]     0: 0x0003f4ff -> 0x0003f500
Sep  8 00:05:36 pelle kernel: [    0.000000] On node 0 totalpages: 259057
Sep  8 00:05:36 pelle kernel: [    0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000
Sep  8 00:05:36 pelle kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Sep  8 00:05:36 pelle kernel: [    0.000000]   DMA zone: 0 pages reserved
Sep  8 00:05:36 pelle kernel: [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
Sep  8 00:05:36 pelle kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Sep  8 00:05:36 pelle kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Sep  8 00:05:36 pelle kernel: [    0.000000]   HighMem zone: 251 pages used for memmap
Sep  8 00:05:36 pelle kernel: [    0.000000]   HighMem zone: 31581 pages, LIFO batch:7
Sep  8 00:05:36 pelle kernel: [    0.000000] Using APIC driver default
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Sep  8 00:05:36 pelle kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: IRQ2 used by override.
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep  8 00:05:36 pelle kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep  8 00:05:36 pelle kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep  8 00:05:36 pelle kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep  8 00:05:36 pelle kernel: [    0.000000] nr_irqs_gsi: 24
Sep  8 00:05:36 pelle kernel: [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Sep  8 00:05:36 pelle kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep  8 00:05:36 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Sep  8 00:05:36 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Sep  8 00:05:36 pelle kernel: [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Sep  8 00:05:36 pelle kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep  8 00:05:36 pelle kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Sep  8 00:05:36 pelle kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536
Sep  8 00:05:36 pelle kernel: [    0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
Sep  8 00:05:36 pelle kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 
Sep  8 00:05:36 pelle kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257030
Sep  8 00:05:36 pelle kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=05e65f51-4919-405f-ae5e-374a2ae344e8 ro quiet splash
Sep  8 00:05:36 pelle kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Sep  8 00:05:36 pelle kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep  8 00:05:36 pelle kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep  8 00:05:36 pelle kernel: [    0.000000] Enabling fast FPU save and restore... done.
Sep  8 00:05:36 pelle kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Sep  8 00:05:36 pelle kernel: [    0.000000] Initializing CPU#0
Sep  8 00:05:36 pelle kernel: [    0.000000] allocated 5186560 bytes of page_cgroup
Sep  8 00:05:36 pelle kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep  8 00:05:36 pelle kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
Sep  8 00:05:36 pelle kernel: [    0.000000] Memory: 1004836k/1037312k available (4679k kernel code, 30884k reserved, 2124k data, 660k init, 127328k highmem)
Sep  8 00:05:36 pelle kernel: [    0.000000] virtual kernel memory layout:
Sep  8 00:05:36 pelle kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Sep  8 00:05:36 pelle kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Sep  8 00:05:36 pelle kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Sep  8 00:05:36 pelle kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Sep  8 00:05:36 pelle kernel: [    0.000000]       .init : 0xc07a5000 - 0xc084a000   ( 660 kB)
Sep  8 00:05:36 pelle kernel: [    0.000000]       .data : 0xc0591e33 - 0xc07a4e88   (2124 kB)
Sep  8 00:05:36 pelle kernel: [    0.000000]       .text : 0xc0100000 - 0xc0591e33   (4679 kB)
Sep  8 00:05:36 pelle kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Sep  8 00:05:36 pelle kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep  8 00:05:36 pelle kernel: [    0.000000] Hierarchical RCU implementation.
Sep  8 00:05:36 pelle kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Sep  8 00:05:36 pelle kernel: [    0.000000] Console: colour VGA+ 80x25
Sep  8 00:05:36 pelle kernel: [    0.000000] console [tty0] enabled
Sep  8 00:05:36 pelle kernel: [    0.000000] hpet clockevent registered
Sep  8 00:05:36 pelle kernel: [    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Sep  8 00:05:36 pelle kernel: [    0.000000] Fast TSC calibration using PIT
Sep  8 00:05:36 pelle kernel: [    0.000000] Detected 1596.057 MHz processor.
Sep  8 00:05:36 pelle kernel: [    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.11 BogoMIPS (lpj=6384228)
Sep  8 00:05:36 pelle kernel: [    0.004047] Security Framework initialized
Sep  8 00:05:36 pelle kernel: [    0.004091] AppArmor: AppArmor initialized
Sep  8 00:05:36 pelle kernel: [    0.004109] Mount-cache hash table entries: 512
Sep  8 00:05:36 pelle kernel: [    0.004356] Initializing cgroup subsys ns
Sep  8 00:05:36 pelle kernel: [    0.004366] Initializing cgroup subsys cpuacct
Sep  8 00:05:36 pelle kernel: [    0.004376] Initializing cgroup subsys memory
Sep  8 00:05:36 pelle kernel: [    0.004390] Initializing cgroup subsys devices
Sep  8 00:05:36 pelle kernel: [    0.004396] Initializing cgroup subsys freezer
Sep  8 00:05:36 pelle kernel: [    0.004402] Initializing cgroup subsys net_cls
Sep  8 00:05:36 pelle kernel: [    0.004437] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:05:36 pelle kernel: [    0.004446] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:05:36 pelle kernel: [    0.004453] CPU: L2 cache: 512K
Sep  8 00:05:36 pelle kernel: [    0.004459] CPU: Physical Processor ID: 0
Sep  8 00:05:36 pelle kernel: [    0.004463] CPU: Processor Core ID: 0
Sep  8 00:05:36 pelle kernel: [    0.004471] mce: CPU supports 5 MCE banks
Sep  8 00:05:36 pelle kernel: [    0.004488] CPU0: Thermal monitoring enabled (TM1)
Sep  8 00:05:36 pelle kernel: [    0.004497] using mwait in idle threads.
Sep  8 00:05:36 pelle kernel: [    0.004509] Performance Events: Atom events, Intel PMU driver.
Sep  8 00:05:36 pelle kernel: [    0.004527] ... version:                3
Sep  8 00:05:36 pelle kernel: [    0.004531] ... bit width:              40
Sep  8 00:05:36 pelle kernel: [    0.004536] ... generic registers:      2
Sep  8 00:05:36 pelle kernel: [    0.004542] ... value mask:             000000ffffffffff
Sep  8 00:05:36 pelle kernel: [    0.004547] ... max period:             000000007fffffff
Sep  8 00:05:36 pelle kernel: [    0.004552] ... fixed-purpose events:   3
Sep  8 00:05:36 pelle kernel: [    0.004557] ... event mask:             0000000700000003
Sep  8 00:05:36 pelle kernel: [    0.004567] Checking 'hlt' instruction... OK.
Sep  8 00:05:36 pelle kernel: [    0.020009] Disabling 4MB page tables to avoid TLB bug
Sep  8 00:05:36 pelle kernel: [    0.024452] ACPI: Core revision 20090903
Sep  8 00:05:36 pelle kernel: [    0.040018] ftrace: converting mcount calls to 0f 1f 44 00 00
Sep  8 00:05:36 pelle kernel: [    0.040030] ftrace: allocating 21780 entries in 43 pages
Sep  8 00:05:36 pelle kernel: [    0.044112] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep  8 00:05:36 pelle kernel: [    0.044521] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep  8 00:05:36 pelle kernel: [    0.085751] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:05:36 pelle kernel: [    0.088001] Booting processor 1 APIC 0x1 ip 0x6000
Sep  8 00:05:36 pelle kernel: [    0.008000] Initializing CPU#1
Sep  8 00:05:36 pelle kernel: [    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:05:36 pelle kernel: [    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:05:36 pelle kernel: [    0.008000] CPU: L2 cache: 512K
Sep  8 00:05:36 pelle kernel: [    0.008000] CPU: Physical Processor ID: 0
Sep  8 00:05:36 pelle kernel: [    0.008000] CPU: Processor Core ID: 0
Sep  8 00:05:36 pelle kernel: [    0.008000] CPU1: Thermal monitoring enabled (TM1)
Sep  8 00:05:36 pelle kernel: [    0.172072] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:05:36 pelle kernel: [    0.172102] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep  8 00:05:36 pelle kernel: [    0.176037] Brought up 2 CPUs
Sep  8 00:05:36 pelle kernel: [    0.176045] Total of 2 processors activated (6384.06 BogoMIPS).
Sep  8 00:05:36 pelle kernel: [    0.176298] CPU0 attaching sched-domain:
Sep  8 00:05:36 pelle kernel: [    0.176309]  domain 0: span 0-1 level SIBLING
Sep  8 00:05:36 pelle kernel: [    0.176315]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:05:36 pelle kernel: [    0.176327]   domain 1: span 0-1 level MC
Sep  8 00:05:36 pelle kernel: [    0.176333]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:05:36 pelle kernel: [    0.176345] CPU1 attaching sched-domain:
Sep  8 00:05:36 pelle kernel: [    0.176350]  domain 0: span 0-1 level SIBLING
Sep  8 00:05:36 pelle kernel: [    0.176355]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:05:36 pelle kernel: [    0.176367]   domain 1: span 0-1 level MC
Sep  8 00:05:36 pelle kernel: [    0.176372]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:05:36 pelle kernel: [    0.176605] devtmpfs: initialized
Sep  8 00:05:36 pelle kernel: [    0.176605] regulator: core version 0.5
Sep  8 00:05:36 pelle kernel: [    0.176605] Time: 21:05:29  Date: 09/07/10
Sep  8 00:05:36 pelle kernel: [    0.176605] NET: Registered protocol family 16
Sep  8 00:05:36 pelle kernel: [    0.176605] Trying to unpack rootfs image as initramfs...
Sep  8 00:05:36 pelle kernel: [    0.176605] EISA bus registered
Sep  8 00:05:36 pelle kernel: [    0.176608] ACPI: bus type pci registered
Sep  8 00:05:36 pelle kernel: [    0.176782] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Sep  8 00:05:36 pelle kernel: [    0.176791] PCI: MCFG area at e0000000 reserved in E820
Sep  8 00:05:36 pelle kernel: [    0.176797] PCI: Using MMCONFIG for extended config space
Sep  8 00:05:36 pelle kernel: [    0.176803] PCI: Using configuration type 1 for base access
Sep  8 00:05:36 pelle kernel: [    0.181806] bio: create slab <bio-0> at 0
Sep  8 00:05:36 pelle kernel: [    0.184357] ACPI: EC: Look up EC in DSDT
Sep  8 00:05:36 pelle kernel: [    0.188635] ACPI: Executed 1 blocks of module-level executable AML code
Sep  8 00:05:36 pelle kernel: [    0.193007] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:05:36 pelle kernel: [    0.193282] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:05:36 pelle kernel: [    0.200462] ACPI: Interpreter enabled
Sep  8 00:05:36 pelle kernel: [    0.200481] ACPI: (supports S0 S3 S4 S5)
Sep  8 00:05:36 pelle kernel: [    0.200553] ACPI: Using IOAPIC for interrupt routing
Sep  8 00:05:36 pelle kernel: [    0.214804] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Sep  8 00:05:36 pelle kernel: [    0.215481] ACPI: No dock devices found.
Sep  8 00:05:36 pelle kernel: [    0.217290] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.217312] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.217334] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
Sep  8 00:05:36 pelle kernel: [    0.217397] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep  8 00:05:36 pelle kernel: [    0.217615] pci 0000:00:02.0: reg 10 32bit mmio: [0x56280000-0x562fffff]
Sep  8 00:05:36 pelle kernel: [    0.217629] pci 0000:00:02.0: reg 14 io port: [0x50c0-0x50c7]
Sep  8 00:05:36 pelle kernel: [    0.217641] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
Sep  8 00:05:36 pelle kernel: [    0.217653] pci 0000:00:02.0: reg 1c 32bit mmio: [0x56300000-0x5633ffff]
Sep  8 00:05:36 pelle kernel: [    0.217723] pci 0000:00:02.1: reg 10 32bit mmio: [0x56200000-0x5627ffff]
Sep  8 00:05:36 pelle kernel: [    0.217888] pci 0000:00:1b.0: reg 10 64bit mmio: [0x56340000-0x56343fff]
Sep  8 00:05:36 pelle kernel: [    0.217972] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep  8 00:05:36 pelle kernel: [    0.217983] pci 0000:00:1b.0: PME# disabled
Sep  8 00:05:36 pelle kernel: [    0.218111] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep  8 00:05:36 pelle kernel: [    0.218122] pci 0000:00:1c.0: PME# disabled
Sep  8 00:05:36 pelle kernel: [    0.218254] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep  8 00:05:36 pelle kernel: [    0.218266] pci 0000:00:1c.1: PME# disabled
Sep  8 00:05:36 pelle kernel: [    0.218414] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Sep  8 00:05:36 pelle kernel: [    0.218428] pci 0000:00:1c.3: PME# disabled
Sep  8 00:05:36 pelle kernel: [    0.218523] pci 0000:00:1d.0: reg 20 io port: [0x5080-0x509f]
Sep  8 00:05:36 pelle kernel: [    0.218616] pci 0000:00:1d.1: reg 20 io port: [0x5060-0x507f]
Sep  8 00:05:36 pelle kernel: [    0.218709] pci 0000:00:1d.2: reg 20 io port: [0x5040-0x505f]
Sep  8 00:05:36 pelle kernel: [    0.218800] pci 0000:00:1d.3: reg 20 io port: [0x5020-0x503f]
Sep  8 00:05:36 pelle kernel: [    0.218897] pci 0000:00:1d.7: reg 10 32bit mmio: [0x56344400-0x563447ff]
Sep  8 00:05:36 pelle kernel: [    0.218982] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Sep  8 00:05:36 pelle kernel: [    0.218993] pci 0000:00:1d.7: PME# disabled
Sep  8 00:05:36 pelle kernel: [    0.219240] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Sep  8 00:05:36 pelle kernel: [    0.219255] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Sep  8 00:05:36 pelle kernel: [    0.219275] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
Sep  8 00:05:36 pelle kernel: [    0.219371] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
Sep  8 00:05:36 pelle kernel: [    0.219386] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
Sep  8 00:05:36 pelle kernel: [    0.219401] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
Sep  8 00:05:36 pelle kernel: [    0.219415] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
Sep  8 00:05:36 pelle kernel: [    0.219431] pci 0000:00:1f.2: reg 20 io port: [0x50a0-0x50af]
Sep  8 00:05:36 pelle kernel: [    0.219482] pci 0000:00:1f.2: PME# supported from D3hot
Sep  8 00:05:36 pelle kernel: [    0.219493] pci 0000:00:1f.2: PME# disabled
Sep  8 00:05:36 pelle kernel: [    0.219577] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
Sep  8 00:05:36 pelle kernel: [    0.219708] pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
Sep  8 00:05:36 pelle kernel: [    0.219720] pci 0000:00:1c.0: bridge 32bit mmio: [0x55200000-0x561fffff]
Sep  8 00:05:36 pelle kernel: [    0.219736] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
Sep  8 00:05:36 pelle kernel: [    0.219825] pci 0000:02:00.0: reg 10 io port: [0x2000-0x20ff]
Sep  8 00:05:36 pelle kernel: [    0.219862] pci 0000:02:00.0: reg 18 64bit mmio pref: [0x51010000-0x51010fff]
Sep  8 00:05:36 pelle kernel: [    0.219890] pci 0000:02:00.0: reg 20 64bit mmio pref: [0x51000000-0x5100ffff]
Sep  8 00:05:36 pelle kernel: [    0.219909] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
Sep  8 00:05:36 pelle kernel: [    0.219983] pci 0000:02:00.0: supports D1 D2
Sep  8 00:05:36 pelle kernel: [    0.220024] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep  8 00:05:36 pelle kernel: [    0.220039] pci 0000:02:00.0: PME# disabled
Sep  8 00:05:36 pelle kernel: [    0.220153] pci 0000:00:1c.1: bridge io port: [0x2000-0x3fff]
Sep  8 00:05:36 pelle kernel: [    0.220165] pci 0000:00:1c.1: bridge 32bit mmio: [0x54200000-0x551fffff]
Sep  8 00:05:36 pelle kernel: [    0.220181] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
Sep  8 00:05:36 pelle kernel: [    0.220268] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
Sep  8 00:05:36 pelle kernel: [    0.220279] pci 0000:00:1c.3: bridge 32bit mmio: [0x53100000-0x541fffff]
Sep  8 00:05:36 pelle kernel: [    0.220295] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x52100000-0x530fffff]
Sep  8 00:05:36 pelle kernel: [    0.220384] pci 0000:00:1e.0: transparent bridge
Sep  8 00:05:36 pelle kernel: [    0.220438] pci_bus 0000:00: on NUMA node 0
Sep  8 00:05:36 pelle kernel: [    0.220459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep  8 00:05:36 pelle kernel: [    0.220956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
Sep  8 00:05:36 pelle kernel: [    0.221362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
Sep  8 00:05:36 pelle kernel: [    0.221652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
Sep  8 00:05:36 pelle kernel: [    0.221916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
Sep  8 00:05:36 pelle kernel: [    0.222483] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.222503] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.234227] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:05:36 pelle kernel: [    0.234581] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:05:36 pelle kernel: [    0.234884] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:05:36 pelle kernel: [    0.235184] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:05:36 pelle kernel: [    0.235502] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:05:36 pelle kernel: [    0.235814] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:05:36 pelle kernel: [    0.236161] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:05:36 pelle kernel: [    0.236500] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:05:36 pelle kernel: [    0.236856] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep  8 00:05:36 pelle kernel: [    0.236887] vgaarb: loaded
Sep  8 00:05:36 pelle kernel: [    0.237264] SCSI subsystem initialized
Sep  8 00:05:36 pelle kernel: [    0.237504] libata version 3.00 loaded.
Sep  8 00:05:36 pelle kernel: [    0.237740] usbcore: registered new interface driver usbfs
Sep  8 00:05:36 pelle kernel: [    0.237788] usbcore: registered new interface driver hub
Sep  8 00:05:36 pelle kernel: [    0.237889] usbcore: registered new device driver usb
Sep  8 00:05:36 pelle kernel: [    0.238548] ACPI: WMI: Mapper loaded
Sep  8 00:05:36 pelle kernel: [    0.238556] PCI: Using ACPI for IRQ routing
Sep  8 00:05:36 pelle kernel: [    0.238963] NetLabel: Initializing
Sep  8 00:05:36 pelle kernel: [    0.238970] NetLabel:  domain hash size = 128
Sep  8 00:05:36 pelle kernel: [    0.238976] NetLabel:  protocols = UNLABELED CIPSOv4
Sep  8 00:05:36 pelle kernel: [    0.239008] NetLabel:  unlabeled traffic allowed by default
Sep  8 00:05:36 pelle kernel: [    0.239120] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep  8 00:05:36 pelle kernel: [    0.239136] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Sep  8 00:05:36 pelle kernel: [    0.244096] Switching to clocksource tsc
Sep  8 00:05:36 pelle kernel: [    0.249036] AppArmor: AppArmor Filesystem Enabled
Sep  8 00:05:36 pelle kernel: [    0.249077] pnp: PnP ACPI init
Sep  8 00:05:36 pelle kernel: [    0.249118] ACPI: bus type pnp registered
Sep  8 00:05:36 pelle kernel: [    0.251803] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
Sep  8 00:05:36 pelle kernel: [    0.253517] pnp: PnP ACPI: found 9 devices
Sep  8 00:05:36 pelle kernel: [    0.253524] ACPI: ACPI bus type pnp unregistered
Sep  8 00:05:36 pelle kernel: [    0.253534] PnPBIOS: Disabled by ACPI PNP
Sep  8 00:05:36 pelle kernel: [    0.253568] system 00:01: ioport range 0x200-0x20f has been reserved
Sep  8 00:05:36 pelle kernel: [    0.253580] system 00:01: ioport range 0x600-0x60f has been reserved
Sep  8 00:05:36 pelle kernel: [    0.253589] system 00:01: ioport range 0x610-0x610 has been reserved
Sep  8 00:05:36 pelle kernel: [    0.253599] system 00:01: ioport range 0x800-0x80f has been reserved
Sep  8 00:05:36 pelle kernel: [    0.253608] system 00:01: ioport range 0x400-0x47f has been reserved
Sep  8 00:05:36 pelle kernel: [    0.253618] system 00:01: ioport range 0x500-0x53f has been reserved
Sep  8 00:05:36 pelle kernel: [    0.253630] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Sep  8 00:05:36 pelle kernel: [    0.253641] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Sep  8 00:05:36 pelle kernel: [    0.253651] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Sep  8 00:05:36 pelle kernel: [    0.253661] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Sep  8 00:05:36 pelle kernel: [    0.253671] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Sep  8 00:05:36 pelle kernel: [    0.253682] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Sep  8 00:05:36 pelle kernel: [    0.253692] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Sep  8 00:05:36 pelle kernel: [    0.288865] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
Sep  8 00:05:36 pelle kernel: [    0.288939] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Sep  8 00:05:36 pelle kernel: [    0.288949] pci 0000:00:1c.0:   IO window: 0x4000-0x4fff
Sep  8 00:05:36 pelle kernel: [    0.288962] pci 0000:00:1c.0:   MEM window: 0x55200000-0x561fffff
Sep  8 00:05:36 pelle kernel: [    0.288974] pci 0000:00:1c.0:   PREFETCH window: 0x00000050000000-0x00000050ffffff
Sep  8 00:05:36 pelle kernel: [    0.288996] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Sep  8 00:05:36 pelle kernel: [    0.289005] pci 0000:00:1c.1:   IO window: 0x2000-0x3fff
Sep  8 00:05:36 pelle kernel: [    0.289018] pci 0000:00:1c.1:   MEM window: 0x54200000-0x551fffff
Sep  8 00:05:36 pelle kernel: [    0.289029] pci 0000:00:1c.1:   PREFETCH window: 0x00000051000000-0x000000520fffff
Sep  8 00:05:36 pelle kernel: [    0.289044] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
Sep  8 00:05:36 pelle kernel: [    0.289054] pci 0000:00:1c.3:   IO window: 0x1000-0x1fff
Sep  8 00:05:36 pelle kernel: [    0.289066] pci 0000:00:1c.3:   MEM window: 0x53100000-0x541fffff
Sep  8 00:05:36 pelle kernel: [    0.289078] pci 0000:00:1c.3:   PREFETCH window: 0x00000052100000-0x000000530fffff
Sep  8 00:05:36 pelle kernel: [    0.289093] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
Sep  8 00:05:36 pelle kernel: [    0.289099] pci 0000:00:1e.0:   IO window: disabled
Sep  8 00:05:36 pelle kernel: [    0.289110] pci 0000:00:1e.0:   MEM window: disabled
Sep  8 00:05:36 pelle kernel: [    0.289120] pci 0000:00:1e.0:   PREFETCH window: disabled
Sep  8 00:05:36 pelle kernel: [    0.289150] pci 0000:00:1c.0: enabling device (0000 -> 0003)
Sep  8 00:05:36 pelle kernel: [    0.289167]   alloc irq_desc for 16 on node -1
Sep  8 00:05:36 pelle kernel: [    0.289174]   alloc kstat_irqs on node -1
Sep  8 00:05:36 pelle kernel: [    0.289191] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:05:36 pelle kernel: [    0.289206] pci 0000:00:1c.0: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.289228]   alloc irq_desc for 17 on node -1
Sep  8 00:05:36 pelle kernel: [    0.289234]   alloc kstat_irqs on node -1
Sep  8 00:05:36 pelle kernel: [    0.289245] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:05:36 pelle kernel: [    0.289257] pci 0000:00:1c.1: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.289277]   alloc irq_desc for 19 on node -1
Sep  8 00:05:36 pelle kernel: [    0.289283]   alloc kstat_irqs on node -1
Sep  8 00:05:36 pelle kernel: [    0.289294] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:05:36 pelle kernel: [    0.289306] pci 0000:00:1c.3: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.289323] pci 0000:00:1e.0: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.289334] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Sep  8 00:05:36 pelle kernel: [    0.289343] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Sep  8 00:05:36 pelle kernel: [    0.289352] pci_bus 0000:01: resource 0 io:  [0x4000-0x4fff]
Sep  8 00:05:36 pelle kernel: [    0.289361] pci_bus 0000:01: resource 1 mem: [0x55200000-0x561fffff]
Sep  8 00:05:36 pelle kernel: [    0.289370] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
Sep  8 00:05:36 pelle kernel: [    0.289378] pci_bus 0000:02: resource 0 io:  [0x2000-0x3fff]
Sep  8 00:05:36 pelle kernel: [    0.289386] pci_bus 0000:02: resource 1 mem: [0x54200000-0x551fffff]
Sep  8 00:05:36 pelle kernel: [    0.289395] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x520fffff]
Sep  8 00:05:36 pelle kernel: [    0.289404] pci_bus 0000:03: resource 0 io:  [0x1000-0x1fff]
Sep  8 00:05:36 pelle kernel: [    0.289412] pci_bus 0000:03: resource 1 mem: [0x53100000-0x541fffff]
Sep  8 00:05:36 pelle kernel: [    0.289421] pci_bus 0000:03: resource 2 pref mem [0x52100000-0x530fffff]
Sep  8 00:05:36 pelle kernel: [    0.289430] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
Sep  8 00:05:36 pelle kernel: [    0.289438] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
Sep  8 00:05:36 pelle kernel: [    0.289546] NET: Registered protocol family 2
Sep  8 00:05:36 pelle kernel: [    0.289834] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep  8 00:05:36 pelle kernel: [    0.290769] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep  8 00:05:36 pelle kernel: [    0.293119] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep  8 00:05:36 pelle kernel: [    0.293712] TCP: Hash tables configured (established 131072 bind 65536)
Sep  8 00:05:36 pelle kernel: [    0.293724] TCP reno registered
Sep  8 00:05:36 pelle kernel: [    0.294028] NET: Registered protocol family 1
Sep  8 00:05:36 pelle kernel: [    0.294084] pci 0000:00:02.0: Boot video device
Sep  8 00:05:36 pelle kernel: [    0.294405] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Sep  8 00:05:36 pelle kernel: [    0.294413] Simple Boot Flag at 0x44 set to 0x1
Sep  8 00:05:36 pelle kernel: [    0.294973] cpufreq-nforce2: No nForce2 chipset.
Sep  8 00:05:36 pelle kernel: [    0.295064] Scanning for low memory corruption every 60 seconds
Sep  8 00:05:36 pelle kernel: [    0.295405] audit: initializing netlink socket (disabled)
Sep  8 00:05:36 pelle kernel: [    0.295433] type=2000 audit(1283893529.294:1): initialized
Sep  8 00:05:36 pelle kernel: [    0.317076] highmem bounce pool size: 64 pages
Sep  8 00:05:36 pelle kernel: [    0.317093] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Sep  8 00:05:36 pelle kernel: [    0.322464] VFS: Disk quotas dquot_6.5.2
Sep  8 00:05:36 pelle kernel: [    0.322664] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep  8 00:05:36 pelle kernel: [    0.324798] fuse init (API version 7.13)
Sep  8 00:05:36 pelle kernel: [    0.325100] msgmni has been set to 1714
Sep  8 00:05:36 pelle kernel: [    0.325826] alg: No test for stdrng (krng)
Sep  8 00:05:36 pelle kernel: [    0.326027] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep  8 00:05:36 pelle kernel: [    0.326037] io scheduler noop registered
Sep  8 00:05:36 pelle kernel: [    0.326043] io scheduler anticipatory registered
Sep  8 00:05:36 pelle kernel: [    0.326049] io scheduler deadline registered
Sep  8 00:05:36 pelle kernel: [    0.326199] io scheduler cfq registered (default)
Sep  8 00:05:36 pelle kernel: [    0.326550]   alloc irq_desc for 24 on node -1
Sep  8 00:05:36 pelle kernel: [    0.326557]   alloc kstat_irqs on node -1
Sep  8 00:05:36 pelle kernel: [    0.326581] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
Sep  8 00:05:36 pelle kernel: [    0.326601] pcieport 0000:00:1c.0: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.326877]   alloc irq_desc for 25 on node -1
Sep  8 00:05:36 pelle kernel: [    0.326884]   alloc kstat_irqs on node -1
Sep  8 00:05:36 pelle kernel: [    0.326901] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
Sep  8 00:05:36 pelle kernel: [    0.326920] pcieport 0000:00:1c.1: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.327261]   alloc irq_desc for 26 on node -1
Sep  8 00:05:36 pelle kernel: [    0.327268]   alloc kstat_irqs on node -1
Sep  8 00:05:36 pelle kernel: [    0.327286] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
Sep  8 00:05:36 pelle kernel: [    0.327305] pcieport 0000:00:1c.3: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.327547] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  8 00:05:36 pelle kernel: [    0.327842] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.327864] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.328241] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.328261] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.328584] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.328603] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.328996] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.329016] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.329345] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.329364] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.329682] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.329701] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:05:36 pelle kernel: [    0.329834] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep  8 00:05:36 pelle kernel: [    0.330454] ACPI: AC Adapter [ACAD] (on-line)
Sep  8 00:05:36 pelle kernel: [    0.330716] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Sep  8 00:05:36 pelle kernel: [    0.330728] ACPI: Power Button [PWRB]
Sep  8 00:05:36 pelle kernel: [    0.330875] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Sep  8 00:05:36 pelle kernel: [    0.331311] ACPI: Lid Switch [LID0]
Sep  8 00:05:36 pelle kernel: [    0.331481] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Sep  8 00:05:36 pelle kernel: [    0.331492] ACPI: Sleep Button [SLPB]
Sep  8 00:05:36 pelle kernel: [    0.331683] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Sep  8 00:05:36 pelle kernel: [    0.331692] ACPI: Power Button [PWRF]
Sep  8 00:05:36 pelle kernel: [    0.333599] ACPI: SSDT 3f380c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
Sep  8 00:05:36 pelle kernel: [    0.334649] ACPI: SSDT 3f37fe10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
Sep  8 00:05:36 pelle kernel: [    0.335610] Marking TSC unstable due to TSC halts in idle
Sep  8 00:05:36 pelle kernel: [    0.335858] processor LNXCPU:00: registered as cooling_device0
Sep  8 00:05:36 pelle kernel: [    0.336925] ACPI: SSDT 3f380f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
Sep  8 00:05:36 pelle kernel: [    0.337876] ACPI: SSDT 3f37ef10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
Sep  8 00:05:36 pelle kernel: [    0.338613] Switching to clocksource hpet
Sep  8 00:05:36 pelle kernel: [    0.339206] processor LNXCPU:01: registered as cooling_device1
Sep  8 00:05:36 pelle kernel: [    0.348218] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Sep  8 00:05:36 pelle kernel: [    0.352456] brd: module loaded
Sep  8 00:05:36 pelle kernel: [    0.353250] ACPI: Battery Slot [BAT1] (battery absent)
Sep  8 00:05:36 pelle kernel: [    0.353300] isapnp: Scanning for PnP cards...
Sep  8 00:05:36 pelle kernel: [    0.403625] loop: module loaded
Sep  8 00:05:36 pelle kernel: [    0.403924] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Sep  8 00:05:36 pelle kernel: [    0.404241] ata_piix 0000:00:1f.2: version 2.13
Sep  8 00:05:36 pelle kernel: [    0.404279] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:05:36 pelle kernel: [    0.404294] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Sep  8 00:05:36 pelle kernel: [    0.404379] ata_piix 0000:00:1f.2: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.448131] scsi0 : ata_piix
Sep  8 00:05:36 pelle kernel: [    0.492165] scsi1 : ata_piix
Sep  8 00:05:36 pelle kernel: [    0.494792] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x50a0 irq 14
Sep  8 00:05:36 pelle kernel: [    0.494802] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50a8 irq 15
Sep  8 00:05:36 pelle kernel: [    0.495897] Fixed MDIO Bus: probed
Sep  8 00:05:36 pelle kernel: [    0.496061] PPP generic driver version 2.4.2
Sep  8 00:05:36 pelle kernel: [    0.496219] tun: Universal TUN/TAP device driver, 1.6
Sep  8 00:05:36 pelle kernel: [    0.496225] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep  8 00:05:36 pelle kernel: [    0.496485] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep  8 00:05:36 pelle kernel: [    0.496541] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:05:36 pelle kernel: [    0.496573] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.496582] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep  8 00:05:36 pelle kernel: [    0.496675] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep  8 00:05:36 pelle kernel: [    0.496721] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Sep  8 00:05:36 pelle kernel: [    0.496741] ehci_hcd 0000:00:1d.7: debug port 1
Sep  8 00:05:36 pelle kernel: [    0.500649] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Sep  8 00:05:36 pelle kernel: [    0.500693] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56344400
Sep  8 00:05:36 pelle kernel: [    0.516764] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Sep  8 00:05:36 pelle kernel: [    0.517092] usb usb1: configuration #1 chosen from 1 choice
Sep  8 00:05:36 pelle kernel: [    0.517190] hub 1-0:1.0: USB hub found
Sep  8 00:05:36 pelle kernel: [    0.517215] hub 1-0:1.0: 8 ports detected
Sep  8 00:05:36 pelle kernel: [    0.517392] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep  8 00:05:36 pelle kernel: [    0.517443] uhci_hcd: USB Universal Host Controller Interface driver
Sep  8 00:05:36 pelle kernel: [    0.517532] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:05:36 pelle kernel: [    0.517552] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.517561] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep  8 00:05:36 pelle kernel: [    0.517673] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep  8 00:05:36 pelle kernel: [    0.517722] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005080
Sep  8 00:05:36 pelle kernel: [    0.517986] usb usb2: configuration #1 chosen from 1 choice
Sep  8 00:05:36 pelle kernel: [    0.518081] hub 2-0:1.0: USB hub found
Sep  8 00:05:36 pelle kernel: [    0.518107] hub 2-0:1.0: 2 ports detected
Sep  8 00:05:36 pelle kernel: [    0.518224] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:05:36 pelle kernel: [    0.518240] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.518248] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep  8 00:05:36 pelle kernel: [    0.518345] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep  8 00:05:36 pelle kernel: [    0.518406] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005060
Sep  8 00:05:36 pelle kernel: [    0.518659] usb usb3: configuration #1 chosen from 1 choice
Sep  8 00:05:36 pelle kernel: [    0.518738] hub 3-0:1.0: USB hub found
Sep  8 00:05:36 pelle kernel: [    0.518757] hub 3-0:1.0: 2 ports detected
Sep  8 00:05:36 pelle kernel: [    0.518870]   alloc irq_desc for 18 on node -1
Sep  8 00:05:36 pelle kernel: [    0.518876]   alloc kstat_irqs on node -1
Sep  8 00:05:36 pelle kernel: [    0.518891] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:05:36 pelle kernel: [    0.518910] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.518918] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep  8 00:05:36 pelle kernel: [    0.519040] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep  8 00:05:36 pelle kernel: [    0.519099] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
Sep  8 00:05:36 pelle kernel: [    0.519357] usb usb4: configuration #1 chosen from 1 choice
Sep  8 00:05:36 pelle kernel: [    0.519436] hub 4-0:1.0: USB hub found
Sep  8 00:05:36 pelle kernel: [    0.519454] hub 4-0:1.0: 2 ports detected
Sep  8 00:05:36 pelle kernel: [    0.519564] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:05:36 pelle kernel: [    0.519579] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    0.519587] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep  8 00:05:36 pelle kernel: [    0.519679] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep  8 00:05:36 pelle kernel: [    0.519734] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005020
Sep  8 00:05:36 pelle kernel: [    0.519983] usb usb5: configuration #1 chosen from 1 choice
Sep  8 00:05:36 pelle kernel: [    0.520100] hub 5-0:1.0: USB hub found
Sep  8 00:05:36 pelle kernel: [    0.520120] hub 5-0:1.0: 2 ports detected
Sep  8 00:05:36 pelle kernel: [    0.520361] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Sep  8 00:05:36 pelle kernel: [    0.524279] i8042.c: Warning: Keylock active.
Sep  8 00:05:36 pelle kernel: [    0.542032] i8042.c: Detected active multiplexing controller, rev 1.1.
Sep  8 00:05:36 pelle kernel: [    0.552909] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  8 00:05:36 pelle kernel: [    0.552937] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Sep  8 00:05:36 pelle kernel: [    0.560125] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Sep  8 00:05:36 pelle kernel: [    0.560233] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Sep  8 00:05:36 pelle kernel: [    0.560309] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Sep  8 00:05:36 pelle kernel: [    0.560705] mice: PS/2 mouse device common for all mice
Sep  8 00:05:36 pelle kernel: [    0.561171] rtc_cmos 00:03: RTC can wake from S4
Sep  8 00:05:36 pelle kernel: [    0.561283] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep  8 00:05:36 pelle kernel: [    0.561338] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Sep  8 00:05:36 pelle kernel: [    0.561678] device-mapper: uevent: version 1.0.3
Sep  8 00:05:36 pelle kernel: [    0.580148] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Sep  8 00:05:36 pelle kernel: [    0.592286] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Sep  8 00:05:36 pelle kernel: [    0.608701] device-mapper: multipath: version 1.1.0 loaded
Sep  8 00:05:36 pelle kernel: [    0.608712] device-mapper: multipath round-robin: version 1.0.0 loaded
Sep  8 00:05:36 pelle kernel: [    0.623791] EISA: Probing bus 0 at eisa.0
Sep  8 00:05:36 pelle kernel: [    0.623806] Cannot allocate resource for EISA slot 1
Sep  8 00:05:36 pelle kernel: [    0.623813] Cannot allocate resource for EISA slot 2
Sep  8 00:05:36 pelle kernel: [    0.623819] Cannot allocate resource for EISA slot 3
Sep  8 00:05:36 pelle kernel: [    0.623825] Cannot allocate resource for EISA slot 4
Sep  8 00:05:36 pelle kernel: [    0.623831] Cannot allocate resource for EISA slot 5
Sep  8 00:05:36 pelle kernel: [    0.623854] EISA: Detected 0 cards.
Sep  8 00:05:36 pelle kernel: [    0.667007] cpuidle: using governor ladder
Sep  8 00:05:36 pelle kernel: [    0.667352] cpuidle: using governor menu
Sep  8 00:05:36 pelle kernel: [    0.668665] TCP cubic registered
Sep  8 00:05:36 pelle kernel: [    0.669217] NET: Registered protocol family 10
Sep  8 00:05:36 pelle kernel: [    0.670512] lo: Disabled Privacy Extensions
Sep  8 00:05:36 pelle kernel: [    0.671444] NET: Registered protocol family 17
Sep  8 00:05:36 pelle kernel: [    0.672552] Using IPI No-Shortcut mode
Sep  8 00:05:36 pelle kernel: [    0.672821] PM: Resume from disk failed.
Sep  8 00:05:36 pelle kernel: [    0.672861] registered taskstats version 1
Sep  8 00:05:36 pelle kernel: [    0.673498]   Magic number: 10:285:95
Sep  8 00:05:36 pelle kernel: [    0.673651] rtc_cmos 00:03: setting system clock to 2010-09-07 21:05:30 UTC (1283893530)
Sep  8 00:05:36 pelle kernel: [    0.673660] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep  8 00:05:36 pelle kernel: [    0.673665] EDD information not available.
Sep  8 00:05:36 pelle kernel: [    0.695988] Freeing initrd memory: 7784k freed
Sep  8 00:05:36 pelle kernel: [    0.710257] isapnp: No Plug & Play device found
Sep  8 00:05:36 pelle kernel: [    0.710939] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
Sep  8 00:05:36 pelle kernel: [    0.710955] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep  8 00:05:36 pelle kernel: [    0.728873] ata1.00: configured for UDMA/133
Sep  8 00:05:36 pelle kernel: [    0.729240] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
Sep  8 00:05:36 pelle kernel: [    0.729599] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Sep  8 00:05:36 pelle kernel: [    0.729642] sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep  8 00:05:36 pelle kernel: [    0.729788] sd 0:0:0:0: [sda] Write Protect is off
Sep  8 00:05:36 pelle kernel: [    0.729797] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  8 00:05:36 pelle kernel: [    0.729886] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  8 00:05:36 pelle kernel: [    0.730254]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Sep  8 00:05:36 pelle kernel: [    0.804570] sd 0:0:0:0: [sda] Attached SCSI disk
Sep  8 00:05:36 pelle kernel: [    0.804617] Freeing unused kernel memory: 660k freed
Sep  8 00:05:36 pelle kernel: [    0.805244] Write protecting the kernel text: 4680k
Sep  8 00:05:36 pelle kernel: [    0.805324] Write protecting the kernel read-only data: 1844k
Sep  8 00:05:36 pelle kernel: [    0.828127] usb 1-5: new high speed USB device using ehci_hcd and address 2
Sep  8 00:05:36 pelle kernel: [    0.844691] udev: starting version 151
Sep  8 00:05:36 pelle kernel: [    1.072460] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep  8 00:05:36 pelle kernel: [    1.072513] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:05:36 pelle kernel: [    1.072604] r8169 0000:02:00.0: setting latency timer to 64
Sep  8 00:05:36 pelle kernel: [    1.072685]   alloc irq_desc for 27 on node -1
Sep  8 00:05:36 pelle kernel: [    1.072693]   alloc kstat_irqs on node -1
Sep  8 00:05:36 pelle kernel: [    1.072727] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
Sep  8 00:05:36 pelle kernel: [    1.075118] eth0: RTL8102e at 0xf804e000, 00:23:8b:0a:17:9d, XID 04a00000 IRQ 27
Sep  8 00:05:36 pelle kernel: [    1.172121] usb 1-5: configuration #1 chosen from 1 choice
Sep  8 00:05:36 pelle kernel: [    1.636098] usb 4-2: new full speed USB device using uhci_hcd and address 2
Sep  8 00:05:36 pelle kernel: [    1.742935] EXT4-fs (sda1): mounted filesystem with ordered data mode
Sep  8 00:05:36 pelle kernel: [    1.798538] usb 4-2: configuration #1 chosen from 1 choice
Sep  8 00:05:36 pelle kernel: [    3.795513] Adding 975864k swap on /dev/sda5.  Priority:-1 extents:1 across:975864k 
Sep  8 00:05:36 pelle kernel: [    4.434402] udev: starting version 151
Sep  8 00:05:36 pelle kernel: [    5.958754] intel_rng: FWH not detected
Sep  8 00:05:36 pelle kernel: [    5.975532] Linux agpgart interface v0.103
Sep  8 00:05:36 pelle kernel: [    6.080711] acer-wmi: Acer Laptop ACPI-WMI Extras
Sep  8 00:05:36 pelle kernel: [    6.080722] acer-wmi: Blacklisted hardware detected - not loading
Sep  8 00:05:36 pelle kernel: [    6.139999] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
Sep  8 00:05:36 pelle kernel: [    6.140871] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Sep  8 00:05:36 pelle kernel: [    6.144692] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Sep  8 00:05:36 pelle kernel: [    6.421658] hso: /build/buildd/linux-2.6.32/drivers/net/usb/hso.c: 1.2 Option Wireless
Sep  8 00:05:36 pelle kernel: [    6.423264] hso0: Disabled Privacy Extensions
Sep  8 00:05:36 pelle kernel: [    6.425682] usbcore: registered new interface driver hso
Sep  8 00:05:36 pelle kernel: [    6.434242] acerhdf: Acer Aspire One Fan driver, v.0.5.20
Sep  8 00:05:36 pelle kernel: [    6.434257] acerhdf: Fan control off, to enable do:
Sep  8 00:05:36 pelle kernel: [    6.434263] acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
Sep  8 00:05:36 pelle kernel: [    6.483459] Linux video capture interface: v2.00
Sep  8 00:05:36 pelle kernel: [    6.521076] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Sep  8 00:05:36 pelle kernel: [    6.521576] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
Sep  8 00:05:36 pelle kernel: [    6.661329] type=1505 audit(1283893536.486:2):  operation="profile_load" pid=497 name="/sbin/dhclient3"
Sep  8 00:05:36 pelle kernel: [    6.661879] type=1505 audit(1283893536.486:3):  operation="profile_load" pid=497 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:05:36 pelle kernel: [    6.662193] type=1505 audit(1283893536.486:4):  operation="profile_load" pid=497 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:05:36 pelle kernel: [    6.862085] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Sep  8 00:05:36 pelle kernel: [    6.866323] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
Sep  8 00:05:36 pelle kernel: [    6.866536] usbcore: registered new interface driver uvcvideo
Sep  8 00:05:36 pelle kernel: [    6.866548] USB Video Class driver (v0.1.0)
Sep  8 00:05:36 pelle kernel: [    6.972657] lp: driver loaded but no devices found
Sep  8 00:05:37 pelle kernel: [    7.370260] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
Sep  8 00:05:37 pelle kernel: [    7.426796] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Sep  8 00:05:37 pelle kernel: [    7.536074] [drm] Initialized drm 1.1.0 20060810
Sep  8 00:05:38 pelle kernel: [    8.171671] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:05:38 pelle kernel: [    8.171686] i915 0000:00:02.0: setting latency timer to 64
Sep  8 00:05:38 pelle kernel: [    8.190431] mtrr: no more MTRRs available
Sep  8 00:05:38 pelle kernel: [    8.190444] [drm] MTRR allocation failed.  Graphics performance may suffer.
Sep  8 00:05:38 pelle kernel: [    8.190622] [drm] set up 7M of stolen space
Sep  8 00:05:38 pelle kernel: [    8.293852] [drm] initialized overlay support
Sep  8 00:05:38 pelle kernel: [    8.716677] fb0: inteldrmfb frame buffer device
Sep  8 00:05:38 pelle kernel: [    8.716685] registered panic notifier
Sep  8 00:05:38 pelle kernel: [    8.716704] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep  8 00:05:38 pelle kernel: [    8.949055] vga16fb: initializing
Sep  8 00:05:38 pelle kernel: [    8.949066] vga16fb: mapped to 0xc00a0000
Sep  8 00:05:38 pelle kernel: [    8.949077] vga16fb: not registering due to another framebuffer present
Sep  8 00:05:39 pelle kernel: [    9.387457] Console: switching to colour frame buffer device 128x37
Sep  8 00:05:39 pelle kernel: [    9.803258] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:05:39 pelle kernel: [    9.803312] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep  8 00:05:39 pelle NetworkManager: <info>  starting...
Sep  8 00:05:39 pelle NetworkManager: <info>  Trying to start the modem-manager...
Sep  8 00:05:39 pelle modem-manager: Loaded plugin MotoC
Sep  8 00:05:39 pelle NetworkManager:    SCPlugin-Ifupdown: init!
Sep  8 00:05:39 pelle NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Sep  8 00:05:39 pelle NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Sep  8 00:05:39 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0)
Sep  8 00:05:39 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Sep  8 00:05:39 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0)
Sep  8 00:05:39 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0): no ifupdown configuration found.
Sep  8 00:05:39 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Sep  8 00:05:39 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Sep  8 00:05:39 pelle NetworkManager:    SCPlugin-Ifupdown: end _init.
Sep  8 00:05:39 pelle NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:05:39 pelle kernel: [   10.111899] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Sep  8 00:05:40 pelle modem-manager: Loaded plugin Gobi
Sep  8 00:05:40 pelle modem-manager: Loaded plugin Huawei
Sep  8 00:05:40 pelle modem-manager: Loaded plugin Nokia
Sep  8 00:05:40 pelle modem-manager: Loaded plugin ZTE
Sep  8 00:05:40 pelle modem-manager: Loaded plugin Option
Sep  8 00:05:40 pelle NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:05:40 pelle NetworkManager: <info>  Found wwan radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/rfkill/rfkill0) (driver usb)
Sep  8 00:05:40 pelle NetworkManager: <info>  WiFi enabled by radio killswitch; enabled by state file
Sep  8 00:05:40 pelle NetworkManager: <info>  WWAN enabled by radio killswitch; disabled by state file
Sep  8 00:05:40 pelle NetworkManager:    SCPlugin-Ifupdown: (147935472) ... get_connections.
Sep  8 00:05:40 pelle NetworkManager:    SCPlugin-Ifupdown: (147935472) ... get_connections (managed=false): return empty list.
Sep  8 00:05:40 pelle kernel: [   10.316978] type=1505 audit(1283893540.142:5):  operation="profile_load" pid=770 name="/usr/share/gdm/guest-session/Xsession"
Sep  8 00:05:40 pelle kernel: [   10.320764] type=1505 audit(1283893540.146:6):  operation="profile_replace" pid=775 name="/sbin/dhclient3"
Sep  8 00:05:40 pelle kernel: [   10.321359] type=1505 audit(1283893540.146:7):  operation="profile_replace" pid=775 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:05:40 pelle kernel: [   10.321684] type=1505 audit(1283893540.146:8):  operation="profile_replace" pid=775 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:05:40 pelle modem-manager: Loaded plugin Sierra
Sep  8 00:05:40 pelle modem-manager: Loaded plugin Novatel
Sep  8 00:05:40 pelle modem-manager: Loaded plugin Ericsson MBM
Sep  8 00:05:40 pelle modem-manager: Loaded plugin Generic
Sep  8 00:05:40 pelle modem-manager: Loaded plugin Option High-Speed
Sep  8 00:05:40 pelle modem-manager: Loaded plugin AnyData
Sep  8 00:05:40 pelle modem-manager: Loaded plugin Longcheer
Sep  8 00:05:40 pelle kernel: [   10.519333] type=1505 audit(1283893540.342:9):  operation="profile_load" pid=776 name="/usr/bin/evince"
Sep  8 00:05:40 pelle kernel: [   10.529236] type=1505 audit(1283893540.354:10):  operation="profile_load" pid=776 name="/usr/bin/evince-previewer"
Sep  8 00:05:40 pelle kernel: [   10.538033] type=1505 audit(1283893540.362:11):  operation="profile_load" pid=776 name="/usr/bin/evince-thumbnailer"
Sep  8 00:05:40 pelle modem-manager: (ttyHS0) opening serial device...
Sep  8 00:05:40 pelle modem-manager: (ttyHS0): probe requested by plugin 'Option High-Speed'
Sep  8 00:05:40 pelle modem-manager: (ttyHS1) opening serial device...
Sep  8 00:05:40 pelle modem-manager: (ttyHS1): probe requested by plugin 'Option High-Speed'
Sep  8 00:05:40 pelle modem-manager: (ttyHS2) opening serial device...
Sep  8 00:05:40 pelle modem-manager: (ttyHS2): probe requested by plugin 'Option High-Speed'
Sep  8 00:05:40 pelle modem-manager: (ttyHS3) opening serial device...
Sep  8 00:05:40 pelle modem-manager: (ttyHS3): probe requested by plugin 'Option High-Speed'
Sep  8 00:05:40 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port hso0
Sep  8 00:05:40 pelle modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2
Sep  8 00:05:41 pelle NetworkManager:    Ifupdown: get unmanaged devices count: 0
Sep  8 00:05:41 pelle NetworkManager: <info>  (eth0): carrier is OFF
Sep  8 00:05:41 pelle NetworkManager: <info>  (eth0): new Ethernet device (driver: 'r8169')
Sep  8 00:05:41 pelle NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep  8 00:05:41 pelle NetworkManager: <info>  (eth0): now managed
Sep  8 00:05:41 pelle NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Sep  8 00:05:41 pelle NetworkManager: <info>  (eth0): bringing up device.
Sep  8 00:05:41 pelle kernel: [   11.818703] r8169: eth0: link down
Sep  8 00:05:41 pelle kernel: [   11.819171] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep  8 00:05:41 pelle NetworkManager: <info>  (eth0): preparing device.
Sep  8 00:05:41 pelle NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Sep  8 00:05:41 pelle NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0
Sep  8 00:05:41 pelle NetworkManager: <info>  modem-manager is now available
Sep  8 00:05:41 pelle NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Sep  8 00:05:41 pelle NetworkManager: <info>  Trying to start the supplicant...
Sep  8 00:05:43 pelle modem-manager: (ttyHS0) closing serial device...
Sep  8 00:05:43 pelle modem-manager: (ttyHS1) closing serial device...
Sep  8 00:05:43 pelle modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 as /org/freedesktop/ModemManager/Modems/0
Sep  8 00:05:43 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS0
Sep  8 00:05:43 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS1
Sep  8 00:05:43 pelle modem-manager: (ttyHS3) closing serial device...
Sep  8 00:05:43 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS3
Sep  8 00:05:43 pelle NetworkManager: <info>  (hso0): new GSM device (driver: 'hso')
Sep  8 00:05:43 pelle NetworkManager: <info>  (hso0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep  8 00:05:43 pelle NetworkManager: <info>  (hso0): now managed
Sep  8 00:05:43 pelle NetworkManager: <info>  (hso0): device state change: 1 -> 2 (reason 2)
Sep  8 00:05:43 pelle NetworkManager: <info>  (hso0): deactivating device (reason: 2).
Sep  8 00:05:43 pelle NetworkManager: <info>  (hso0): device state change: 2 -> 3 (reason 0)
Sep  8 00:05:44 pelle kernel: [   14.441497] ppdev: user-space parallel port driver
Sep  8 00:05:46 pelle kernel: [   16.500847] CPU0 attaching NULL sched-domain.
Sep  8 00:05:46 pelle kernel: [   16.500859] CPU1 attaching NULL sched-domain.
Sep  8 00:05:46 pelle kernel: [   16.528324] CPU0 attaching sched-domain:
Sep  8 00:05:46 pelle kernel: [   16.528340]  domain 0: span 0-1 level SIBLING
Sep  8 00:05:46 pelle kernel: [   16.528353]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:05:46 pelle kernel: [   16.528379]   domain 1: span 0-1 level MC
Sep  8 00:05:46 pelle kernel: [   16.528390]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:05:46 pelle kernel: [   16.528412] CPU1 attaching sched-domain:
Sep  8 00:05:46 pelle kernel: [   16.528421]  domain 0: span 0-1 level SIBLING
Sep  8 00:05:46 pelle kernel: [   16.528432]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:05:46 pelle kernel: [   16.528455]   domain 1: span 0-1 level MC
Sep  8 00:05:46 pelle kernel: [   16.528466]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:05:50 pelle kernel: [   20.963413] CPU0 attaching NULL sched-domain.
Sep  8 00:05:50 pelle kernel: [   20.963426] CPU1 attaching NULL sched-domain.
Sep  8 00:05:50 pelle kernel: [   20.981248] CPU0 attaching sched-domain:
Sep  8 00:05:50 pelle kernel: [   20.981264]  domain 0: span 0-1 level SIBLING
Sep  8 00:05:50 pelle kernel: [   20.981277]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:05:50 pelle kernel: [   20.981303]   domain 1: span 0-1 level MC
Sep  8 00:05:50 pelle kernel: [   20.981314]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:05:50 pelle kernel: [   20.981335] CPU1 attaching sched-domain:
Sep  8 00:05:50 pelle kernel: [   20.981345]  domain 0: span 0-1 level SIBLING
Sep  8 00:05:50 pelle kernel: [   20.981365]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:05:50 pelle kernel: [   20.981378]   domain 1: span 0-1 level MC
Sep  8 00:05:50 pelle kernel: [   20.981383]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:05:54 pelle modem-manager: (ttyHS2) closing serial device...
Sep  8 00:17:06 pelle kernel: [  696.421048] __ratelimit: 9 callbacks suppressed
Sep  8 00:17:06 pelle kernel: [  696.421061] python[1364]: segfault at 64 ip 00000064 sp bf940fcc error 4 in libcrypto.so.0.9.8[110000+138000]
Sep  8 00:17:06 pelle kernel: Kernel logging (proc) stopped.
Sep  8 00:17:40 pelle kernel: imklog 4.2.0, log source = /proc/kmsg started.
Sep  8 00:17:40 pelle kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep  8 00:17:40 pelle kernel: [    0.000000] Initializing cgroup subsys cpu
Sep  8 00:17:40 pelle kernel: [    0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
Sep  8 00:17:40 pelle kernel: [    0.000000] KERNEL supported cpus:
Sep  8 00:17:40 pelle kernel: [    0.000000]   Intel GenuineIntel
Sep  8 00:17:40 pelle kernel: [    0.000000]   AMD AuthenticAMD
Sep  8 00:17:40 pelle kernel: [    0.000000]   NSC Geode by NSC
Sep  8 00:17:40 pelle kernel: [    0.000000]   Cyrix CyrixInstead
Sep  8 00:17:40 pelle kernel: [    0.000000]   Centaur CentaurHauls
Sep  8 00:17:40 pelle kernel: [    0.000000]   Transmeta GenuineTMx86
Sep  8 00:17:40 pelle kernel: [    0.000000]   Transmeta TransmetaCPU
Sep  8 00:17:40 pelle kernel: [    0.000000]   UMC UMC UMC UMC
Sep  8 00:17:40 pelle kernel: [    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:17:40 pelle kernel: [    0.000000] BIOS-provided physical RAM map:
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000] DMI 2.4 present.
Sep  8 00:17:40 pelle kernel: [    0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
Sep  8 00:17:40 pelle kernel: [    0.000000] MTRR default type: uncachable
Sep  8 00:17:40 pelle kernel: [    0.000000] MTRR fixed ranges enabled:
Sep  8 00:17:40 pelle kernel: [    0.000000]   00000-9FFFF write-back
Sep  8 00:17:40 pelle kernel: [    0.000000]   A0000-BFFFF uncachable
Sep  8 00:17:40 pelle kernel: [    0.000000]   C0000-C7FFF write-protect
Sep  8 00:17:40 pelle kernel: [    0.000000]   C8000-EFFFF uncachable
Sep  8 00:17:40 pelle kernel: [    0.000000]   F0000-FFFFF write-protect
Sep  8 00:17:40 pelle kernel: [    0.000000] MTRR variable ranges enabled:
Sep  8 00:17:40 pelle kernel: [    0.000000]   0 base 0FFFE0000 mask 0FFFE0000 write-protect
Sep  8 00:17:40 pelle kernel: [    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
Sep  8 00:17:40 pelle kernel: [    0.000000]   2 base 000000000 mask 0E0000000 write-back
Sep  8 00:17:40 pelle kernel: [    0.000000]   3 base 020000000 mask 0E0000000 write-back
Sep  8 00:17:40 pelle kernel: [    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
Sep  8 00:17:40 pelle kernel: [    0.000000]   5 base 03F600000 mask 0FFE00000 uncachable
Sep  8 00:17:40 pelle kernel: [    0.000000]   6 base 03F500000 mask 0FFF00000 uncachable
Sep  8 00:17:40 pelle kernel: [    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
Sep  8 00:17:40 pelle kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep  8 00:17:40 pelle kernel: [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000] Scanning 1 areas for low memory corruption
Sep  8 00:17:40 pelle kernel: [    0.000000] modified physical RAM map:
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:17:40 pelle kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Sep  8 00:17:40 pelle kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Sep  8 00:17:40 pelle kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Sep  8 00:17:40 pelle kernel: [    0.000000]  0000000000 - 00377fe000 page 4k
Sep  8 00:17:40 pelle kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 8e2000-9c3000
Sep  8 00:17:40 pelle kernel: [    0.000000] RAMDISK: 2ef3e000 - 2f6d8324
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: RSDP 000fe020 00024 (v02 INTEL )
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: XSDT 3f4fe120 00064 (v01 INTEL  Napa     00000001      01000013)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: FACP 3f4fc000 000F4 (v04 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: DSDT 3f4f2000 05DE4 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: FACS 3f488000 00040
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: SSDT 3f4fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: HPET 3f4fb000 00038 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: APIC 3f4fa000 00068 (v02 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: MCFG 3f4f9000 0003C (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: SLIC 3f4f1000 00180 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: BOOT 3f4f0000 00028 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:17:40 pelle kernel: [    0.000000] 125MB HIGHMEM available.
Sep  8 00:17:40 pelle kernel: [    0.000000] 887MB LOWMEM available.
Sep  8 00:17:40 pelle kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Sep  8 00:17:40 pelle kernel: [    0.000000]   low ram: 0 - 377fe000
Sep  8 00:17:40 pelle kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Sep  8 00:17:40 pelle kernel: [    0.000000]   node 0 bootmap 00007000 - 0000df00
Sep  8 00:17:40 pelle kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Sep  8 00:17:40 pelle kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Sep  8 00:17:40 pelle kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Sep  8 00:17:40 pelle kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Sep  8 00:17:40 pelle kernel: [    0.000000]   #3 [0000100000 - 00008ddeb8]    TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
Sep  8 00:17:40 pelle kernel: [    0.000000]   #4 [002ef3e000 - 002f6d8324]          RAMDISK ==> [002ef3e000 - 002f6d8324]
Sep  8 00:17:40 pelle kernel: [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Sep  8 00:17:40 pelle kernel: [    0.000000]   #6 [00008de000 - 00008e1244]              BRK ==> [00008de000 - 00008e1244]
Sep  8 00:17:40 pelle kernel: [    0.000000]   #7 [00008e2000 - 00009bd000]          PGTABLE ==> [00008e2000 - 00009bd000]
Sep  8 00:17:40 pelle kernel: [    0.000000]   #8 [0000007000 - 000000e000]          BOOTMAP ==> [0000007000 - 000000e000]
Sep  8 00:17:40 pelle kernel: [    0.000000] Zone PFN ranges:
Sep  8 00:17:40 pelle kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Sep  8 00:17:40 pelle kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Sep  8 00:17:40 pelle kernel: [    0.000000]   HighMem  0x000377fe -> 0x0003f500
Sep  8 00:17:40 pelle kernel: [    0.000000] Movable zone start PFN for each node
Sep  8 00:17:40 pelle kernel: [    0.000000] early_node_map[6] active PFN ranges
Sep  8 00:17:40 pelle kernel: [    0.000000]     0: 0x00000000 -> 0x00000002
Sep  8 00:17:40 pelle kernel: [    0.000000]     0: 0x00000006 -> 0x0000009f
Sep  8 00:17:40 pelle kernel: [    0.000000]     0: 0x00000100 -> 0x0003f376
Sep  8 00:17:40 pelle kernel: [    0.000000]     0: 0x0003f3bf -> 0x0003f46d
Sep  8 00:17:40 pelle kernel: [    0.000000]     0: 0x0003f4bf -> 0x0003f4f0
Sep  8 00:17:40 pelle kernel: [    0.000000]     0: 0x0003f4ff -> 0x0003f500
Sep  8 00:17:40 pelle kernel: [    0.000000] On node 0 totalpages: 259057
Sep  8 00:17:40 pelle kernel: [    0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000
Sep  8 00:17:40 pelle kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Sep  8 00:17:40 pelle kernel: [    0.000000]   DMA zone: 0 pages reserved
Sep  8 00:17:40 pelle kernel: [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
Sep  8 00:17:40 pelle kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Sep  8 00:17:40 pelle kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Sep  8 00:17:40 pelle kernel: [    0.000000]   HighMem zone: 251 pages used for memmap
Sep  8 00:17:40 pelle kernel: [    0.000000]   HighMem zone: 31581 pages, LIFO batch:7
Sep  8 00:17:40 pelle kernel: [    0.000000] Using APIC driver default
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Sep  8 00:17:40 pelle kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: IRQ2 used by override.
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep  8 00:17:40 pelle kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep  8 00:17:40 pelle kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep  8 00:17:40 pelle kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep  8 00:17:40 pelle kernel: [    0.000000] nr_irqs_gsi: 24
Sep  8 00:17:40 pelle kernel: [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Sep  8 00:17:40 pelle kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep  8 00:17:40 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Sep  8 00:17:40 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Sep  8 00:17:40 pelle kernel: [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Sep  8 00:17:40 pelle kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep  8 00:17:40 pelle kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Sep  8 00:17:40 pelle kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536
Sep  8 00:17:40 pelle kernel: [    0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
Sep  8 00:17:40 pelle kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 
Sep  8 00:17:40 pelle kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257030
Sep  8 00:17:40 pelle kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=05e65f51-4919-405f-ae5e-374a2ae344e8 ro quiet splash
Sep  8 00:17:40 pelle kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Sep  8 00:17:40 pelle kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep  8 00:17:40 pelle kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep  8 00:17:40 pelle kernel: [    0.000000] Enabling fast FPU save and restore... done.
Sep  8 00:17:40 pelle kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Sep  8 00:17:40 pelle kernel: [    0.000000] Initializing CPU#0
Sep  8 00:17:40 pelle kernel: [    0.000000] allocated 5186560 bytes of page_cgroup
Sep  8 00:17:40 pelle kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep  8 00:17:40 pelle kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
Sep  8 00:17:40 pelle kernel: [    0.000000] Memory: 1004836k/1037312k available (4679k kernel code, 30884k reserved, 2124k data, 660k init, 127328k highmem)
Sep  8 00:17:40 pelle kernel: [    0.000000] virtual kernel memory layout:
Sep  8 00:17:40 pelle kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Sep  8 00:17:40 pelle kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Sep  8 00:17:40 pelle kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Sep  8 00:17:40 pelle kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Sep  8 00:17:40 pelle kernel: [    0.000000]       .init : 0xc07a5000 - 0xc084a000   ( 660 kB)
Sep  8 00:17:40 pelle kernel: [    0.000000]       .data : 0xc0591e33 - 0xc07a4e88   (2124 kB)
Sep  8 00:17:40 pelle kernel: [    0.000000]       .text : 0xc0100000 - 0xc0591e33   (4679 kB)
Sep  8 00:17:40 pelle kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Sep  8 00:17:40 pelle kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep  8 00:17:40 pelle kernel: [    0.000000] Hierarchical RCU implementation.
Sep  8 00:17:40 pelle kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Sep  8 00:17:40 pelle kernel: [    0.000000] Console: colour VGA+ 80x25
Sep  8 00:17:40 pelle kernel: [    0.000000] console [tty0] enabled
Sep  8 00:17:40 pelle kernel: [    0.000000] hpet clockevent registered
Sep  8 00:17:40 pelle kernel: [    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Sep  8 00:17:40 pelle kernel: [    0.000000] Fast TSC calibration using PIT
Sep  8 00:17:40 pelle kernel: [    0.000000] Detected 1596.102 MHz processor.
Sep  8 00:17:40 pelle kernel: [    0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.20 BogoMIPS (lpj=6384408)
Sep  8 00:17:40 pelle kernel: [    0.004049] Security Framework initialized
Sep  8 00:17:40 pelle kernel: [    0.004094] AppArmor: AppArmor initialized
Sep  8 00:17:40 pelle kernel: [    0.004111] Mount-cache hash table entries: 512
Sep  8 00:17:40 pelle kernel: [    0.004360] Initializing cgroup subsys ns
Sep  8 00:17:40 pelle kernel: [    0.004372] Initializing cgroup subsys cpuacct
Sep  8 00:17:40 pelle kernel: [    0.004382] Initializing cgroup subsys memory
Sep  8 00:17:40 pelle kernel: [    0.004396] Initializing cgroup subsys devices
Sep  8 00:17:40 pelle kernel: [    0.004402] Initializing cgroup subsys freezer
Sep  8 00:17:40 pelle kernel: [    0.004408] Initializing cgroup subsys net_cls
Sep  8 00:17:40 pelle kernel: [    0.004441] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:17:40 pelle kernel: [    0.004450] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:17:40 pelle kernel: [    0.004457] CPU: L2 cache: 512K
Sep  8 00:17:40 pelle kernel: [    0.004462] CPU: Physical Processor ID: 0
Sep  8 00:17:40 pelle kernel: [    0.004467] CPU: Processor Core ID: 0
Sep  8 00:17:40 pelle kernel: [    0.004474] mce: CPU supports 5 MCE banks
Sep  8 00:17:40 pelle kernel: [    0.004492] CPU0: Thermal monitoring enabled (TM1)
Sep  8 00:17:40 pelle kernel: [    0.004501] using mwait in idle threads.
Sep  8 00:17:40 pelle kernel: [    0.004513] Performance Events: Atom events, Intel PMU driver.
Sep  8 00:17:40 pelle kernel: [    0.004530] ... version:                3
Sep  8 00:17:40 pelle kernel: [    0.004535] ... bit width:              40
Sep  8 00:17:40 pelle kernel: [    0.004539] ... generic registers:      2
Sep  8 00:17:40 pelle kernel: [    0.004545] ... value mask:             000000ffffffffff
Sep  8 00:17:40 pelle kernel: [    0.004551] ... max period:             000000007fffffff
Sep  8 00:17:40 pelle kernel: [    0.004556] ... fixed-purpose events:   3
Sep  8 00:17:40 pelle kernel: [    0.004560] ... event mask:             0000000700000003
Sep  8 00:17:40 pelle kernel: [    0.004570] Checking 'hlt' instruction... OK.
Sep  8 00:17:40 pelle kernel: [    0.020010] Disabling 4MB page tables to avoid TLB bug
Sep  8 00:17:40 pelle kernel: [    0.024465] ACPI: Core revision 20090903
Sep  8 00:17:40 pelle kernel: [    0.044017] ftrace: converting mcount calls to 0f 1f 44 00 00
Sep  8 00:17:40 pelle kernel: [    0.044031] ftrace: allocating 21780 entries in 43 pages
Sep  8 00:17:40 pelle kernel: [    0.048109] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep  8 00:17:40 pelle kernel: [    0.048518] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep  8 00:17:40 pelle kernel: [    0.091798] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:17:40 pelle kernel: [    0.092001] Booting processor 1 APIC 0x1 ip 0x6000
Sep  8 00:17:40 pelle kernel: [    0.008000] Initializing CPU#1
Sep  8 00:17:40 pelle kernel: [    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:17:40 pelle kernel: [    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:17:40 pelle kernel: [    0.008000] CPU: L2 cache: 512K
Sep  8 00:17:40 pelle kernel: [    0.008000] CPU: Physical Processor ID: 0
Sep  8 00:17:40 pelle kernel: [    0.008000] CPU: Processor Core ID: 0
Sep  8 00:17:40 pelle kernel: [    0.008000] CPU1: Thermal monitoring enabled (TM1)
Sep  8 00:17:40 pelle kernel: [    0.176078] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:17:40 pelle kernel: [    0.176108] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep  8 00:17:40 pelle kernel: [    0.180035] Brought up 2 CPUs
Sep  8 00:17:40 pelle kernel: [    0.180043] Total of 2 processors activated (6384.15 BogoMIPS).
Sep  8 00:17:40 pelle kernel: [    0.180288] CPU0 attaching sched-domain:
Sep  8 00:17:40 pelle kernel: [    0.180298]  domain 0: span 0-1 level SIBLING
Sep  8 00:17:40 pelle kernel: [    0.180303]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:17:40 pelle kernel: [    0.180317]   domain 1: span 0-1 level MC
Sep  8 00:17:40 pelle kernel: [    0.180322]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:17:40 pelle kernel: [    0.180335] CPU1 attaching sched-domain:
Sep  8 00:17:40 pelle kernel: [    0.180340]  domain 0: span 0-1 level SIBLING
Sep  8 00:17:40 pelle kernel: [    0.180345]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:17:40 pelle kernel: [    0.180357]   domain 1: span 0-1 level MC
Sep  8 00:17:40 pelle kernel: [    0.180362]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:17:40 pelle kernel: [    0.180593] devtmpfs: initialized
Sep  8 00:17:40 pelle kernel: [    0.180593] regulator: core version 0.5
Sep  8 00:17:40 pelle kernel: [    0.180593] Time: 21:17:29  Date: 09/07/10
Sep  8 00:17:40 pelle kernel: [    0.180593] NET: Registered protocol family 16
Sep  8 00:17:40 pelle kernel: [    0.180593] Trying to unpack rootfs image as initramfs...
Sep  8 00:17:40 pelle kernel: [    0.180593] EISA bus registered
Sep  8 00:17:40 pelle kernel: [    0.180610] ACPI: bus type pci registered
Sep  8 00:17:40 pelle kernel: [    0.180781] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Sep  8 00:17:40 pelle kernel: [    0.180790] PCI: MCFG area at e0000000 reserved in E820
Sep  8 00:17:40 pelle kernel: [    0.180796] PCI: Using MMCONFIG for extended config space
Sep  8 00:17:40 pelle kernel: [    0.180803] PCI: Using configuration type 1 for base access
Sep  8 00:17:40 pelle kernel: [    0.185786] bio: create slab <bio-0> at 0
Sep  8 00:17:40 pelle kernel: [    0.188349] ACPI: EC: Look up EC in DSDT
Sep  8 00:17:40 pelle kernel: [    0.192629] ACPI: Executed 1 blocks of module-level executable AML code
Sep  8 00:17:40 pelle kernel: [    0.197010] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:17:40 pelle kernel: [    0.197287] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:17:40 pelle kernel: [    0.204449] ACPI: Interpreter enabled
Sep  8 00:17:40 pelle kernel: [    0.204468] ACPI: (supports S0 S3 S4 S5)
Sep  8 00:17:40 pelle kernel: [    0.204540] ACPI: Using IOAPIC for interrupt routing
Sep  8 00:17:40 pelle kernel: [    0.218249] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Sep  8 00:17:40 pelle kernel: [    0.218928] ACPI: No dock devices found.
Sep  8 00:17:40 pelle kernel: [    0.220724] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.220745] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.220768] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
Sep  8 00:17:40 pelle kernel: [    0.220838] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep  8 00:17:40 pelle kernel: [    0.221058] pci 0000:00:02.0: reg 10 32bit mmio: [0x56380000-0x563fffff]
Sep  8 00:17:40 pelle kernel: [    0.221071] pci 0000:00:02.0: reg 14 io port: [0x50c0-0x50c7]
Sep  8 00:17:40 pelle kernel: [    0.221083] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
Sep  8 00:17:40 pelle kernel: [    0.221096] pci 0000:00:02.0: reg 1c 32bit mmio: [0x56400000-0x5643ffff]
Sep  8 00:17:40 pelle kernel: [    0.221164] pci 0000:00:02.1: reg 10 32bit mmio: [0x56300000-0x5637ffff]
Sep  8 00:17:40 pelle kernel: [    0.221330] pci 0000:00:1b.0: reg 10 64bit mmio: [0x56440000-0x56443fff]
Sep  8 00:17:40 pelle kernel: [    0.221414] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep  8 00:17:40 pelle kernel: [    0.221425] pci 0000:00:1b.0: PME# disabled
Sep  8 00:17:40 pelle kernel: [    0.221553] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep  8 00:17:40 pelle kernel: [    0.221563] pci 0000:00:1c.0: PME# disabled
Sep  8 00:17:40 pelle kernel: [    0.221704] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep  8 00:17:40 pelle kernel: [    0.221715] pci 0000:00:1c.1: PME# disabled
Sep  8 00:17:40 pelle kernel: [    0.221850] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Sep  8 00:17:40 pelle kernel: [    0.221860] pci 0000:00:1c.3: PME# disabled
Sep  8 00:17:40 pelle kernel: [    0.221953] pci 0000:00:1d.0: reg 20 io port: [0x5080-0x509f]
Sep  8 00:17:40 pelle kernel: [    0.222044] pci 0000:00:1d.1: reg 20 io port: [0x5060-0x507f]
Sep  8 00:17:40 pelle kernel: [    0.222137] pci 0000:00:1d.2: reg 20 io port: [0x5040-0x505f]
Sep  8 00:17:40 pelle kernel: [    0.222228] pci 0000:00:1d.3: reg 20 io port: [0x5020-0x503f]
Sep  8 00:17:40 pelle kernel: [    0.222325] pci 0000:00:1d.7: reg 10 32bit mmio: [0x56444400-0x564447ff]
Sep  8 00:17:40 pelle kernel: [    0.222416] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Sep  8 00:17:40 pelle kernel: [    0.222430] pci 0000:00:1d.7: PME# disabled
Sep  8 00:17:40 pelle kernel: [    0.222675] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Sep  8 00:17:40 pelle kernel: [    0.222688] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Sep  8 00:17:40 pelle kernel: [    0.222706] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
Sep  8 00:17:40 pelle kernel: [    0.222799] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
Sep  8 00:17:40 pelle kernel: [    0.222814] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
Sep  8 00:17:40 pelle kernel: [    0.222829] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
Sep  8 00:17:40 pelle kernel: [    0.222844] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
Sep  8 00:17:40 pelle kernel: [    0.222859] pci 0000:00:1f.2: reg 20 io port: [0x50a0-0x50af]
Sep  8 00:17:40 pelle kernel: [    0.222909] pci 0000:00:1f.2: PME# supported from D3hot
Sep  8 00:17:40 pelle kernel: [    0.222919] pci 0000:00:1f.2: PME# disabled
Sep  8 00:17:40 pelle kernel: [    0.223004] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
Sep  8 00:17:40 pelle kernel: [    0.223133] pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
Sep  8 00:17:40 pelle kernel: [    0.223145] pci 0000:00:1c.0: bridge 32bit mmio: [0x55200000-0x562fffff]
Sep  8 00:17:40 pelle kernel: [    0.223161] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
Sep  8 00:17:40 pelle kernel: [    0.223257] pci 0000:02:00.0: reg 10 io port: [0x2000-0x20ff]
Sep  8 00:17:40 pelle kernel: [    0.223298] pci 0000:02:00.0: reg 18 64bit mmio pref: [0x51010000-0x51010fff]
Sep  8 00:17:40 pelle kernel: [    0.223330] pci 0000:02:00.0: reg 20 64bit mmio pref: [0x51000000-0x5100ffff]
Sep  8 00:17:40 pelle kernel: [    0.223353] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
Sep  8 00:17:40 pelle kernel: [    0.223425] pci 0000:02:00.0: supports D1 D2
Sep  8 00:17:40 pelle kernel: [    0.223432] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep  8 00:17:40 pelle kernel: [    0.223444] pci 0000:02:00.0: PME# disabled
Sep  8 00:17:40 pelle kernel: [    0.223556] pci 0000:00:1c.1: bridge io port: [0x2000-0x3fff]
Sep  8 00:17:40 pelle kernel: [    0.223568] pci 0000:00:1c.1: bridge 32bit mmio: [0x54200000-0x551fffff]
Sep  8 00:17:40 pelle kernel: [    0.223583] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
Sep  8 00:17:40 pelle kernel: [    0.223671] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
Sep  8 00:17:40 pelle kernel: [    0.223682] pci 0000:00:1c.3: bridge 32bit mmio: [0x53100000-0x541fffff]
Sep  8 00:17:40 pelle kernel: [    0.223698] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x52100000-0x530fffff]
Sep  8 00:17:40 pelle kernel: [    0.223788] pci 0000:00:1e.0: transparent bridge
Sep  8 00:17:40 pelle kernel: [    0.223841] pci_bus 0000:00: on NUMA node 0
Sep  8 00:17:40 pelle kernel: [    0.223863] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep  8 00:17:40 pelle kernel: [    0.224409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
Sep  8 00:17:40 pelle kernel: [    0.224813] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
Sep  8 00:17:40 pelle kernel: [    0.225124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
Sep  8 00:17:40 pelle kernel: [    0.225373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
Sep  8 00:17:40 pelle kernel: [    0.225960] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.225981] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.237721] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:17:40 pelle kernel: [    0.238035] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:17:40 pelle kernel: [    0.238339] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:17:40 pelle kernel: [    0.238664] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:17:40 pelle kernel: [    0.238975] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:17:40 pelle kernel: [    0.239277] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:17:40 pelle kernel: [    0.239596] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:17:40 pelle kernel: [    0.239929] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:17:40 pelle kernel: [    0.240333] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep  8 00:17:40 pelle kernel: [    0.240366] vgaarb: loaded
Sep  8 00:17:40 pelle kernel: [    0.240733] SCSI subsystem initialized
Sep  8 00:17:40 pelle kernel: [    0.240973] libata version 3.00 loaded.
Sep  8 00:17:40 pelle kernel: [    0.241226] usbcore: registered new interface driver usbfs
Sep  8 00:17:40 pelle kernel: [    0.241273] usbcore: registered new interface driver hub
Sep  8 00:17:40 pelle kernel: [    0.241385] usbcore: registered new device driver usb
Sep  8 00:17:40 pelle kernel: [    0.242039] ACPI: WMI: Mapper loaded
Sep  8 00:17:40 pelle kernel: [    0.242047] PCI: Using ACPI for IRQ routing
Sep  8 00:17:40 pelle kernel: [    0.242464] NetLabel: Initializing
Sep  8 00:17:40 pelle kernel: [    0.242470] NetLabel:  domain hash size = 128
Sep  8 00:17:40 pelle kernel: [    0.242476] NetLabel:  protocols = UNLABELED CIPSOv4
Sep  8 00:17:40 pelle kernel: [    0.242511] NetLabel:  unlabeled traffic allowed by default
Sep  8 00:17:40 pelle kernel: [    0.242624] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep  8 00:17:40 pelle kernel: [    0.242642] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Sep  8 00:17:40 pelle kernel: [    0.248095] Switching to clocksource tsc
Sep  8 00:17:40 pelle kernel: [    0.253037] AppArmor: AppArmor Filesystem Enabled
Sep  8 00:17:40 pelle kernel: [    0.253086] pnp: PnP ACPI init
Sep  8 00:17:40 pelle kernel: [    0.253127] ACPI: bus type pnp registered
Sep  8 00:17:40 pelle kernel: [    0.255798] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
Sep  8 00:17:40 pelle kernel: [    0.257507] pnp: PnP ACPI: found 9 devices
Sep  8 00:17:40 pelle kernel: [    0.257515] ACPI: ACPI bus type pnp unregistered
Sep  8 00:17:40 pelle kernel: [    0.257524] PnPBIOS: Disabled by ACPI PNP
Sep  8 00:17:40 pelle kernel: [    0.257557] system 00:01: ioport range 0x200-0x20f has been reserved
Sep  8 00:17:40 pelle kernel: [    0.257569] system 00:01: ioport range 0x600-0x60f has been reserved
Sep  8 00:17:40 pelle kernel: [    0.257578] system 00:01: ioport range 0x610-0x610 has been reserved
Sep  8 00:17:40 pelle kernel: [    0.257588] system 00:01: ioport range 0x800-0x80f has been reserved
Sep  8 00:17:40 pelle kernel: [    0.257597] system 00:01: ioport range 0x400-0x47f has been reserved
Sep  8 00:17:40 pelle kernel: [    0.257607] system 00:01: ioport range 0x500-0x53f has been reserved
Sep  8 00:17:40 pelle kernel: [    0.257619] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Sep  8 00:17:40 pelle kernel: [    0.257630] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Sep  8 00:17:40 pelle kernel: [    0.257640] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Sep  8 00:17:40 pelle kernel: [    0.257650] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Sep  8 00:17:40 pelle kernel: [    0.257660] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Sep  8 00:17:40 pelle kernel: [    0.257671] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Sep  8 00:17:40 pelle kernel: [    0.257681] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Sep  8 00:17:40 pelle kernel: [    0.292858] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
Sep  8 00:17:40 pelle kernel: [    0.292933] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Sep  8 00:17:40 pelle kernel: [    0.292943] pci 0000:00:1c.0:   IO window: 0x4000-0x4fff
Sep  8 00:17:40 pelle kernel: [    0.292957] pci 0000:00:1c.0:   MEM window: 0x55200000-0x562fffff
Sep  8 00:17:40 pelle kernel: [    0.292969] pci 0000:00:1c.0:   PREFETCH window: 0x00000050000000-0x00000050ffffff
Sep  8 00:17:40 pelle kernel: [    0.292989] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Sep  8 00:17:40 pelle kernel: [    0.292998] pci 0000:00:1c.1:   IO window: 0x2000-0x3fff
Sep  8 00:17:40 pelle kernel: [    0.293011] pci 0000:00:1c.1:   MEM window: 0x54200000-0x551fffff
Sep  8 00:17:40 pelle kernel: [    0.293022] pci 0000:00:1c.1:   PREFETCH window: 0x00000051000000-0x000000520fffff
Sep  8 00:17:40 pelle kernel: [    0.293037] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
Sep  8 00:17:40 pelle kernel: [    0.293046] pci 0000:00:1c.3:   IO window: 0x1000-0x1fff
Sep  8 00:17:40 pelle kernel: [    0.293059] pci 0000:00:1c.3:   MEM window: 0x53100000-0x541fffff
Sep  8 00:17:40 pelle kernel: [    0.293070] pci 0000:00:1c.3:   PREFETCH window: 0x00000052100000-0x000000530fffff
Sep  8 00:17:40 pelle kernel: [    0.293085] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
Sep  8 00:17:40 pelle kernel: [    0.293092] pci 0000:00:1e.0:   IO window: disabled
Sep  8 00:17:40 pelle kernel: [    0.293103] pci 0000:00:1e.0:   MEM window: disabled
Sep  8 00:17:40 pelle kernel: [    0.293112] pci 0000:00:1e.0:   PREFETCH window: disabled
Sep  8 00:17:40 pelle kernel: [    0.293151]   alloc irq_desc for 16 on node -1
Sep  8 00:17:40 pelle kernel: [    0.293158]   alloc kstat_irqs on node -1
Sep  8 00:17:40 pelle kernel: [    0.293176] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:17:40 pelle kernel: [    0.293189] pci 0000:00:1c.0: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.293210]   alloc irq_desc for 17 on node -1
Sep  8 00:17:40 pelle kernel: [    0.293216]   alloc kstat_irqs on node -1
Sep  8 00:17:40 pelle kernel: [    0.293228] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:17:40 pelle kernel: [    0.293240] pci 0000:00:1c.1: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.293260]   alloc irq_desc for 19 on node -1
Sep  8 00:17:40 pelle kernel: [    0.293266]   alloc kstat_irqs on node -1
Sep  8 00:17:40 pelle kernel: [    0.293277] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:17:40 pelle kernel: [    0.293288] pci 0000:00:1c.3: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.293305] pci 0000:00:1e.0: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.293317] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Sep  8 00:17:40 pelle kernel: [    0.293325] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Sep  8 00:17:40 pelle kernel: [    0.293334] pci_bus 0000:01: resource 0 io:  [0x4000-0x4fff]
Sep  8 00:17:40 pelle kernel: [    0.293343] pci_bus 0000:01: resource 1 mem: [0x55200000-0x562fffff]
Sep  8 00:17:40 pelle kernel: [    0.293351] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
Sep  8 00:17:40 pelle kernel: [    0.293360] pci_bus 0000:02: resource 0 io:  [0x2000-0x3fff]
Sep  8 00:17:40 pelle kernel: [    0.293369] pci_bus 0000:02: resource 1 mem: [0x54200000-0x551fffff]
Sep  8 00:17:40 pelle kernel: [    0.293377] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x520fffff]
Sep  8 00:17:40 pelle kernel: [    0.293386] pci_bus 0000:03: resource 0 io:  [0x1000-0x1fff]
Sep  8 00:17:40 pelle kernel: [    0.293395] pci_bus 0000:03: resource 1 mem: [0x53100000-0x541fffff]
Sep  8 00:17:40 pelle kernel: [    0.293403] pci_bus 0000:03: resource 2 pref mem [0x52100000-0x530fffff]
Sep  8 00:17:40 pelle kernel: [    0.293412] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
Sep  8 00:17:40 pelle kernel: [    0.293420] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
Sep  8 00:17:40 pelle kernel: [    0.293521] NET: Registered protocol family 2
Sep  8 00:17:40 pelle kernel: [    0.293812] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep  8 00:17:40 pelle kernel: [    0.294748] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep  8 00:17:40 pelle kernel: [    0.295999] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep  8 00:17:40 pelle kernel: [    0.296580] TCP: Hash tables configured (established 131072 bind 65536)
Sep  8 00:17:40 pelle kernel: [    0.296591] TCP reno registered
Sep  8 00:17:40 pelle kernel: [    0.296870] NET: Registered protocol family 1
Sep  8 00:17:40 pelle kernel: [    0.296943] pci 0000:00:02.0: Boot video device
Sep  8 00:17:40 pelle kernel: [    0.297280] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Sep  8 00:17:40 pelle kernel: [    0.297288] Simple Boot Flag at 0x44 set to 0x1
Sep  8 00:17:40 pelle kernel: [    0.297807] cpufreq-nforce2: No nForce2 chipset.
Sep  8 00:17:40 pelle kernel: [    0.297902] Scanning for low memory corruption every 60 seconds
Sep  8 00:17:40 pelle kernel: [    0.298257] audit: initializing netlink socket (disabled)
Sep  8 00:17:40 pelle kernel: [    0.298285] type=2000 audit(1283894248.294:1): initialized
Sep  8 00:17:40 pelle kernel: [    0.319918] highmem bounce pool size: 64 pages
Sep  8 00:17:40 pelle kernel: [    0.319939] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Sep  8 00:17:40 pelle kernel: [    0.325334] VFS: Disk quotas dquot_6.5.2
Sep  8 00:17:40 pelle kernel: [    0.325542] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep  8 00:17:40 pelle kernel: [    0.327659] fuse init (API version 7.13)
Sep  8 00:17:40 pelle kernel: [    0.327967] msgmni has been set to 1714
Sep  8 00:17:40 pelle kernel: [    0.328696] alg: No test for stdrng (krng)
Sep  8 00:17:40 pelle kernel: [    0.328903] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep  8 00:17:40 pelle kernel: [    0.328914] io scheduler noop registered
Sep  8 00:17:40 pelle kernel: [    0.328920] io scheduler anticipatory registered
Sep  8 00:17:40 pelle kernel: [    0.328926] io scheduler deadline registered
Sep  8 00:17:40 pelle kernel: [    0.329066] io scheduler cfq registered (default)
Sep  8 00:17:40 pelle kernel: [    0.329412]   alloc irq_desc for 24 on node -1
Sep  8 00:17:40 pelle kernel: [    0.329421]   alloc kstat_irqs on node -1
Sep  8 00:17:40 pelle kernel: [    0.329446] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
Sep  8 00:17:40 pelle kernel: [    0.329467] pcieport 0000:00:1c.0: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.329748]   alloc irq_desc for 25 on node -1
Sep  8 00:17:40 pelle kernel: [    0.329755]   alloc kstat_irqs on node -1
Sep  8 00:17:40 pelle kernel: [    0.329773] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
Sep  8 00:17:40 pelle kernel: [    0.329791] pcieport 0000:00:1c.1: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.330058]   alloc irq_desc for 26 on node -1
Sep  8 00:17:40 pelle kernel: [    0.330065]   alloc kstat_irqs on node -1
Sep  8 00:17:40 pelle kernel: [    0.330083] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
Sep  8 00:17:40 pelle kernel: [    0.330101] pcieport 0000:00:1c.3: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.330359] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  8 00:17:40 pelle kernel: [    0.330644] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.330664] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.331055] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.331077] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.331442] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.331462] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.331848] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.331867] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.332189] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.332211] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.332536] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.332555] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:17:40 pelle kernel: [    0.332672] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep  8 00:17:40 pelle kernel: [    0.333701] ACPI: AC Adapter [ACAD] (on-line)
Sep  8 00:17:40 pelle kernel: [    0.333992] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Sep  8 00:17:40 pelle kernel: [    0.334004] ACPI: Power Button [PWRB]
Sep  8 00:17:40 pelle kernel: [    0.334141] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Sep  8 00:17:40 pelle kernel: [    0.334548] ACPI: Lid Switch [LID0]
Sep  8 00:17:40 pelle kernel: [    0.334721] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Sep  8 00:17:40 pelle kernel: [    0.334734] ACPI: Sleep Button [SLPB]
Sep  8 00:17:40 pelle kernel: [    0.334914] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Sep  8 00:17:40 pelle kernel: [    0.334945] ACPI: Power Button [PWRF]
Sep  8 00:17:40 pelle kernel: [    0.336860] ACPI: SSDT 3f380c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
Sep  8 00:17:40 pelle kernel: [    0.337897] ACPI: SSDT 3f37fe10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
Sep  8 00:17:40 pelle kernel: [    0.338814] Marking TSC unstable due to TSC halts in idle
Sep  8 00:17:40 pelle kernel: [    0.339097] processor LNXCPU:00: registered as cooling_device0
Sep  8 00:17:40 pelle kernel: [    0.340147] ACPI: SSDT 3f380f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
Sep  8 00:17:40 pelle kernel: [    0.341094] ACPI: SSDT 3f37ef10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
Sep  8 00:17:40 pelle kernel: [    0.341839] Switching to clocksource hpet
Sep  8 00:17:40 pelle kernel: [    0.342343] processor LNXCPU:01: registered as cooling_device1
Sep  8 00:17:40 pelle kernel: [    0.351410] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Sep  8 00:17:40 pelle kernel: [    0.352662] ACPI: Battery Slot [BAT1] (battery absent)
Sep  8 00:17:40 pelle kernel: [    0.352702] isapnp: Scanning for PnP cards...
Sep  8 00:17:40 pelle kernel: [    0.355364] brd: module loaded
Sep  8 00:17:40 pelle kernel: [    0.356834] loop: module loaded
Sep  8 00:17:40 pelle kernel: [    0.357135] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Sep  8 00:17:40 pelle kernel: [    0.357394] ata_piix 0000:00:1f.2: version 2.13
Sep  8 00:17:40 pelle kernel: [    0.357431] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:17:40 pelle kernel: [    0.357444] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Sep  8 00:17:40 pelle kernel: [    0.357527] ata_piix 0000:00:1f.2: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.377163] scsi0 : ata_piix
Sep  8 00:17:40 pelle kernel: [    0.402446] scsi1 : ata_piix
Sep  8 00:17:40 pelle kernel: [    0.405172] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x50a0 irq 14
Sep  8 00:17:40 pelle kernel: [    0.405182] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50a8 irq 15
Sep  8 00:17:40 pelle kernel: [    0.406485] Fixed MDIO Bus: probed
Sep  8 00:17:40 pelle kernel: [    0.406599] PPP generic driver version 2.4.2
Sep  8 00:17:40 pelle kernel: [    0.406743] tun: Universal TUN/TAP device driver, 1.6
Sep  8 00:17:40 pelle kernel: [    0.406749] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep  8 00:17:40 pelle kernel: [    0.407005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep  8 00:17:40 pelle kernel: [    0.407057] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:17:40 pelle kernel: [    0.407093] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.407102] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep  8 00:17:40 pelle kernel: [    0.407202] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep  8 00:17:40 pelle kernel: [    0.407248] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Sep  8 00:17:40 pelle kernel: [    0.407268] ehci_hcd 0000:00:1d.7: debug port 1
Sep  8 00:17:40 pelle kernel: [    0.411177] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Sep  8 00:17:40 pelle kernel: [    0.411215] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56444400
Sep  8 00:17:40 pelle kernel: [    0.441301] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Sep  8 00:17:40 pelle kernel: [    0.441626] usb usb1: configuration #1 chosen from 1 choice
Sep  8 00:17:40 pelle kernel: [    0.441716] hub 1-0:1.0: USB hub found
Sep  8 00:17:40 pelle kernel: [    0.441740] hub 1-0:1.0: 8 ports detected
Sep  8 00:17:40 pelle kernel: [    0.441912] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep  8 00:17:40 pelle kernel: [    0.441963] uhci_hcd: USB Universal Host Controller Interface driver
Sep  8 00:17:40 pelle kernel: [    0.442052] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:17:40 pelle kernel: [    0.442071] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.442080] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep  8 00:17:40 pelle kernel: [    0.442195] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep  8 00:17:40 pelle kernel: [    0.442243] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005080
Sep  8 00:17:40 pelle kernel: [    0.442501] usb usb2: configuration #1 chosen from 1 choice
Sep  8 00:17:40 pelle kernel: [    0.442592] hub 2-0:1.0: USB hub found
Sep  8 00:17:40 pelle kernel: [    0.442619] hub 2-0:1.0: 2 ports detected
Sep  8 00:17:40 pelle kernel: [    0.442740] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:17:40 pelle kernel: [    0.442755] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.442764] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep  8 00:17:40 pelle kernel: [    0.442863] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep  8 00:17:40 pelle kernel: [    0.442922] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005060
Sep  8 00:17:40 pelle kernel: [    0.443168] usb usb3: configuration #1 chosen from 1 choice
Sep  8 00:17:40 pelle kernel: [    0.443247] hub 3-0:1.0: USB hub found
Sep  8 00:17:40 pelle kernel: [    0.443275] hub 3-0:1.0: 2 ports detected
Sep  8 00:17:40 pelle kernel: [    0.443392]   alloc irq_desc for 18 on node -1
Sep  8 00:17:40 pelle kernel: [    0.443399]   alloc kstat_irqs on node -1
Sep  8 00:17:40 pelle kernel: [    0.443414] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:17:40 pelle kernel: [    0.443428] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.443436] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep  8 00:17:40 pelle kernel: [    0.443528] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep  8 00:17:40 pelle kernel: [    0.443584] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
Sep  8 00:17:40 pelle kernel: [    0.443840] usb usb4: configuration #1 chosen from 1 choice
Sep  8 00:17:40 pelle kernel: [    0.443920] hub 4-0:1.0: USB hub found
Sep  8 00:17:40 pelle kernel: [    0.443940] hub 4-0:1.0: 2 ports detected
Sep  8 00:17:40 pelle kernel: [    0.444061] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:17:40 pelle kernel: [    0.444076] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    0.444085] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep  8 00:17:40 pelle kernel: [    0.444187] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep  8 00:17:40 pelle kernel: [    0.444247] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005020
Sep  8 00:17:40 pelle kernel: [    0.444494] usb usb5: configuration #1 chosen from 1 choice
Sep  8 00:17:40 pelle kernel: [    0.444575] hub 5-0:1.0: USB hub found
Sep  8 00:17:40 pelle kernel: [    0.444594] hub 5-0:1.0: 2 ports detected
Sep  8 00:17:40 pelle kernel: [    0.444841] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Sep  8 00:17:40 pelle kernel: [    0.448607] i8042.c: Warning: Keylock active.
Sep  8 00:17:40 pelle kernel: [    0.466856] i8042.c: Detected active multiplexing controller, rev 1.1.
Sep  8 00:17:40 pelle kernel: [    0.477713] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  8 00:17:40 pelle kernel: [    0.477742] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Sep  8 00:17:40 pelle kernel: [    0.477752] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Sep  8 00:17:40 pelle kernel: [    0.477761] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Sep  8 00:17:40 pelle kernel: [    0.477770] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Sep  8 00:17:40 pelle kernel: [    0.478072] mice: PS/2 mouse device common for all mice
Sep  8 00:17:40 pelle kernel: [    0.478497] rtc_cmos 00:03: RTC can wake from S4
Sep  8 00:17:40 pelle kernel: [    0.478605] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep  8 00:17:40 pelle kernel: [    0.478654] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Sep  8 00:17:40 pelle kernel: [    0.478998] device-mapper: uevent: version 1.0.3
Sep  8 00:17:40 pelle kernel: [    0.485761] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Sep  8 00:17:40 pelle kernel: [    0.497769] device-mapper: multipath: version 1.1.0 loaded
Sep  8 00:17:40 pelle kernel: [    0.497779] device-mapper: multipath round-robin: version 1.0.0 loaded
Sep  8 00:17:40 pelle kernel: [    0.505373] EISA: Probing bus 0 at eisa.0
Sep  8 00:17:40 pelle kernel: [    0.505390] Cannot allocate resource for EISA slot 1
Sep  8 00:17:40 pelle kernel: [    0.505397] Cannot allocate resource for EISA slot 2
Sep  8 00:17:40 pelle kernel: [    0.505403] Cannot allocate resource for EISA slot 3
Sep  8 00:17:40 pelle kernel: [    0.505409] Cannot allocate resource for EISA slot 4
Sep  8 00:17:40 pelle kernel: [    0.505416] Cannot allocate resource for EISA slot 5
Sep  8 00:17:40 pelle kernel: [    0.505439] EISA: Detected 0 cards.
Sep  8 00:17:40 pelle kernel: [    0.521177] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Sep  8 00:17:40 pelle kernel: [    0.570767] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
Sep  8 00:17:40 pelle kernel: [    0.570779] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep  8 00:17:40 pelle kernel: [    0.577143] cpuidle: using governor ladder
Sep  8 00:17:40 pelle kernel: [    0.577507] cpuidle: using governor menu
Sep  8 00:17:40 pelle kernel: [    0.578931] TCP cubic registered
Sep  8 00:17:40 pelle kernel: [    0.579520] NET: Registered protocol family 10
Sep  8 00:17:40 pelle kernel: [    0.580976] lo: Disabled Privacy Extensions
Sep  8 00:17:40 pelle kernel: [    0.581995] NET: Registered protocol family 17
Sep  8 00:17:40 pelle kernel: [    0.583221] Using IPI No-Shortcut mode
Sep  8 00:17:40 pelle kernel: [    0.583515] PM: Resume from disk failed.
Sep  8 00:17:40 pelle kernel: [    0.583548] registered taskstats version 1
Sep  8 00:17:40 pelle kernel: [    0.584253]   Magic number: 10:491:297
Sep  8 00:17:40 pelle kernel: [    0.584413] rtc_cmos 00:03: setting system clock to 2010-09-07 21:17:29 UTC (1283894249)
Sep  8 00:17:40 pelle kernel: [    0.584423] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep  8 00:17:40 pelle kernel: [    0.584429] EDD information not available.
Sep  8 00:17:40 pelle kernel: [    0.586404] ata1.00: configured for UDMA/133
Sep  8 00:17:40 pelle kernel: [    0.697074] Freeing initrd memory: 7784k freed
Sep  8 00:17:40 pelle kernel: [    0.715646] isapnp: No Plug & Play device found
Sep  8 00:17:40 pelle kernel: [    0.715934] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
Sep  8 00:17:40 pelle kernel: [    0.716327] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Sep  8 00:17:40 pelle kernel: [    0.716365] sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep  8 00:17:40 pelle kernel: [    0.716519] sd 0:0:0:0: [sda] Write Protect is off
Sep  8 00:17:40 pelle kernel: [    0.716529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  8 00:17:40 pelle kernel: [    0.716631] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  8 00:17:40 pelle kernel: [    0.717114]  sda: sda1 sda2 < sda5 sda6
Sep  8 00:17:40 pelle kernel: [    0.760137] usb 1-5: new high speed USB device using ehci_hcd and address 2
Sep  8 00:17:40 pelle kernel: [    0.773850]  sda7 sda8 >
Sep  8 00:17:40 pelle kernel: [    0.781909] sd 0:0:0:0: [sda] Attached SCSI disk
Sep  8 00:17:40 pelle kernel: [    0.781984] Freeing unused kernel memory: 660k freed
Sep  8 00:17:40 pelle kernel: [    0.782564] Write protecting the kernel text: 4680k
Sep  8 00:17:40 pelle kernel: [    0.782647] Write protecting the kernel read-only data: 1844k
Sep  8 00:17:40 pelle kernel: [    0.822303] udev: starting version 151
Sep  8 00:17:40 pelle kernel: [    1.104754] usb 1-5: configuration #1 chosen from 1 choice
Sep  8 00:17:40 pelle kernel: [    1.171542] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep  8 00:17:40 pelle kernel: [    1.171592] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:17:40 pelle kernel: [    1.171672] r8169 0000:02:00.0: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [    1.171751]   alloc irq_desc for 27 on node -1
Sep  8 00:17:40 pelle kernel: [    1.171760]   alloc kstat_irqs on node -1
Sep  8 00:17:40 pelle kernel: [    1.171790] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
Sep  8 00:17:40 pelle kernel: [    1.173795] eth0: RTL8102e at 0xf804e000, 00:23:8b:0a:17:9d, XID 04a00000 IRQ 27
Sep  8 00:17:40 pelle kernel: [    1.633131] usb 4-2: new full speed USB device using uhci_hcd and address 2
Sep  8 00:17:40 pelle kernel: [    1.731514] EXT4-fs (sda1): mounted filesystem with ordered data mode
Sep  8 00:17:40 pelle kernel: [    1.798055] usb 4-2: configuration #1 chosen from 1 choice
Sep  8 00:17:40 pelle kernel: [    9.446712] Adding 975864k swap on /dev/sda5.  Priority:-1 extents:1 across:975864k 
Sep  8 00:17:40 pelle kernel: [    9.481265] udev: starting version 151
Sep  8 00:17:40 pelle kernel: [    9.819905] lp: driver loaded but no devices found
Sep  8 00:17:40 pelle kernel: [    9.948510] Linux agpgart interface v0.103
Sep  8 00:17:40 pelle kernel: [   10.067120] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Sep  8 00:17:40 pelle kernel: [   10.067264] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
Sep  8 00:17:40 pelle kernel: [   10.073412] intel_rng: FWH not detected
Sep  8 00:17:40 pelle kernel: [   10.180320] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
Sep  8 00:17:40 pelle kernel: [   10.180577] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Sep  8 00:17:40 pelle kernel: [   10.233895] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Sep  8 00:17:40 pelle kernel: [   10.275230] Linux video capture interface: v2.00
Sep  8 00:17:40 pelle kernel: [   10.298836] hso: /build/buildd/linux-2.6.32/drivers/net/usb/hso.c: 1.2 Option Wireless
Sep  8 00:17:40 pelle kernel: [   10.300118] hso0: Disabled Privacy Extensions
Sep  8 00:17:40 pelle kernel: [   10.316705] usbcore: registered new interface driver hso
Sep  8 00:17:40 pelle kernel: [   10.535652] type=1505 audit(1283894259.447:2):  operation="profile_load" pid=595 name="/sbin/dhclient3"
Sep  8 00:17:40 pelle kernel: [   10.536501] type=1505 audit(1283894259.451:3):  operation="profile_load" pid=595 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:17:40 pelle kernel: [   10.536960] type=1505 audit(1283894259.451:4):  operation="profile_load" pid=595 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:17:40 pelle kernel: [   10.563821] [drm] Initialized drm 1.1.0 20060810
Sep  8 00:17:40 pelle kernel: [   10.614911] acer-wmi: Acer Laptop ACPI-WMI Extras
Sep  8 00:17:40 pelle kernel: [   10.614925] acer-wmi: Blacklisted hardware detected - not loading
Sep  8 00:17:40 pelle kernel: [   10.660503] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Sep  8 00:17:40 pelle kernel: [   10.664797] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
Sep  8 00:17:40 pelle kernel: [   10.665030] usbcore: registered new interface driver uvcvideo
Sep  8 00:17:40 pelle kernel: [   10.665040] USB Video Class driver (v0.1.0)
Sep  8 00:17:40 pelle kernel: [   10.670112] acerhdf: Acer Aspire One Fan driver, v.0.5.20
Sep  8 00:17:40 pelle kernel: [   10.670129] acerhdf: Fan control off, to enable do:
Sep  8 00:17:40 pelle kernel: [   10.670135] acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
Sep  8 00:17:40 pelle kernel: [   10.855834] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:17:40 pelle kernel: [   10.855849] i915 0000:00:02.0: setting latency timer to 64
Sep  8 00:17:40 pelle kernel: [   10.905560] mtrr: no more MTRRs available
Sep  8 00:17:40 pelle kernel: [   10.905572] [drm] MTRR allocation failed.  Graphics performance may suffer.
Sep  8 00:17:40 pelle kernel: [   10.906426] [drm] set up 7M of stolen space
Sep  8 00:17:40 pelle kernel: [   11.026004] [drm] initialized overlay support
Sep  8 00:17:40 pelle kernel: [   11.341150] type=1505 audit(1283894260.255:5):  operation="profile_load" pid=729 name="/usr/share/gdm/guest-session/Xsession"
Sep  8 00:17:40 pelle kernel: [   11.349410] type=1505 audit(1283894260.263:6):  operation="profile_replace" pid=731 name="/sbin/dhclient3"
Sep  8 00:17:40 pelle kernel: [   11.350194] type=1505 audit(1283894260.263:7):  operation="profile_replace" pid=731 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:17:40 pelle kernel: [   11.350647] type=1505 audit(1283894260.263:8):  operation="profile_replace" pid=731 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:17:40 pelle kernel: [   11.361736] type=1505 audit(1283894260.275:9):  operation="profile_load" pid=732 name="/usr/bin/evince"
Sep  8 00:17:40 pelle kernel: [   11.386739] type=1505 audit(1283894260.299:10):  operation="profile_load" pid=732 name="/usr/bin/evince-previewer"
Sep  8 00:17:40 pelle kernel: [   11.392944] type=1505 audit(1283894260.307:11):  operation="profile_load" pid=732 name="/usr/bin/evince-thumbnailer"
Sep  8 00:17:40 pelle kernel: [   11.466001] fb0: inteldrmfb frame buffer device
Sep  8 00:17:40 pelle kernel: [   11.466010] registered panic notifier
Sep  8 00:17:40 pelle kernel: [   11.466030] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep  8 00:17:40 pelle kernel: [   11.466137] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:17:40 pelle kernel: [   11.466212] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep  8 00:17:40 pelle NetworkManager: <info>  starting...
Sep  8 00:17:40 pelle kernel: [   11.485835] vga16fb: initializing
Sep  8 00:17:40 pelle kernel: [   11.485849] vga16fb: mapped to 0xc00a0000
Sep  8 00:17:40 pelle kernel: [   11.485860] vga16fb: not registering due to another framebuffer present
Sep  8 00:17:40 pelle kernel: [   11.496356] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
Sep  8 00:17:40 pelle NetworkManager: <info>  Trying to start the modem-manager...
Sep  8 00:17:40 pelle NetworkManager:    SCPlugin-Ifupdown: init!
Sep  8 00:17:40 pelle NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Sep  8 00:17:40 pelle NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Sep  8 00:17:40 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0)
Sep  8 00:17:40 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Sep  8 00:17:40 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0)
Sep  8 00:17:40 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0): no ifupdown configuration found.
Sep  8 00:17:40 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Sep  8 00:17:40 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Sep  8 00:17:40 pelle NetworkManager:    SCPlugin-Ifupdown: end _init.
Sep  8 00:17:40 pelle NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:17:40 pelle NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:17:40 pelle NetworkManager: <info>  Found wwan radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/rfkill/rfkill0) (driver usb)
Sep  8 00:17:40 pelle NetworkManager: <info>  WiFi enabled by radio killswitch; enabled by state file
Sep  8 00:17:40 pelle NetworkManager: <info>  WWAN enabled by radio killswitch; disabled by state file
Sep  8 00:17:40 pelle NetworkManager:    SCPlugin-Ifupdown: (146432240) ... get_connections.
Sep  8 00:17:40 pelle NetworkManager:    SCPlugin-Ifupdown: (146432240) ... get_connections (managed=false): return empty list.
Sep  8 00:17:40 pelle modem-manager: Loaded plugin MotoC
Sep  8 00:17:40 pelle modem-manager: Loaded plugin Gobi
Sep  8 00:17:40 pelle modem-manager: Loaded plugin Huawei
Sep  8 00:17:40 pelle NetworkManager:    Ifupdown: get unmanaged devices count: 0
Sep  8 00:17:40 pelle NetworkManager: <info>  (eth0): carrier is OFF
Sep  8 00:17:40 pelle NetworkManager: <info>  (eth0): new Ethernet device (driver: 'r8169')
Sep  8 00:17:40 pelle NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep  8 00:17:40 pelle NetworkManager: <info>  (eth0): now managed
Sep  8 00:17:40 pelle NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Sep  8 00:17:40 pelle NetworkManager: <info>  (eth0): bringing up device.
Sep  8 00:17:40 pelle NetworkManager: <info>  (eth0): preparing device.
Sep  8 00:17:40 pelle NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Sep  8 00:17:40 pelle NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0
Sep  8 00:17:40 pelle modem-manager: Loaded plugin Nokia
Sep  8 00:17:40 pelle modem-manager: Loaded plugin ZTE
Sep  8 00:17:40 pelle kernel: [   11.555650] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Sep  8 00:17:40 pelle kernel: [   11.661573] r8169: eth0: link down
Sep  8 00:17:40 pelle kernel: [   11.662183] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep  8 00:17:40 pelle kernel: [   11.745974] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Sep  8 00:17:40 pelle kernel: [   11.749691] Console: switching to colour frame buffer device 128x37
Sep  8 00:17:40 pelle modem-manager: Loaded plugin Option
Sep  8 00:17:40 pelle modem-manager: Loaded plugin Sierra
Sep  8 00:17:40 pelle modem-manager: Loaded plugin Novatel
Sep  8 00:17:40 pelle modem-manager: Loaded plugin Ericsson MBM
Sep  8 00:17:40 pelle NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Sep  8 00:17:40 pelle NetworkManager: <info>  modem-manager is now available
Sep  8 00:17:40 pelle modem-manager: Loaded plugin Generic
Sep  8 00:17:40 pelle modem-manager: Loaded plugin Option High-Speed
Sep  8 00:17:40 pelle modem-manager: Loaded plugin AnyData
Sep  8 00:17:40 pelle NetworkManager: <info>  Trying to start the supplicant...
Sep  8 00:17:40 pelle modem-manager: Loaded plugin Longcheer
Sep  8 00:17:41 pelle modem-manager: (ttyHS0) opening serial device...
Sep  8 00:17:41 pelle modem-manager: (ttyHS0): probe requested by plugin 'Option High-Speed'
Sep  8 00:17:41 pelle modem-manager: (ttyHS1) opening serial device...
Sep  8 00:17:41 pelle modem-manager: (ttyHS1): probe requested by plugin 'Option High-Speed'
Sep  8 00:17:41 pelle modem-manager: (ttyHS2) opening serial device...
Sep  8 00:17:41 pelle modem-manager: (ttyHS2): probe requested by plugin 'Option High-Speed'
Sep  8 00:17:41 pelle modem-manager: (ttyHS3) opening serial device...
Sep  8 00:17:41 pelle modem-manager: (ttyHS3): probe requested by plugin 'Option High-Speed'
Sep  8 00:17:41 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port hso0
Sep  8 00:17:41 pelle modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2
Sep  8 00:17:41 pelle kernel: [   12.475619] ppdev: user-space parallel port driver
Sep  8 00:17:42 pelle kernel: [   13.107083] CPU0 attaching NULL sched-domain.
Sep  8 00:17:42 pelle kernel: [   13.107099] CPU1 attaching NULL sched-domain.
Sep  8 00:17:42 pelle kernel: [   13.133172] CPU0 attaching sched-domain:
Sep  8 00:17:42 pelle kernel: [   13.133184]  domain 0: span 0-1 level SIBLING
Sep  8 00:17:42 pelle kernel: [   13.133193]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:17:42 pelle kernel: [   13.133212]   domain 1: span 0-1 level MC
Sep  8 00:17:42 pelle kernel: [   13.133220]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:17:42 pelle kernel: [   13.133237] CPU1 attaching sched-domain:
Sep  8 00:17:42 pelle kernel: [   13.133244]  domain 0: span 0-1 level SIBLING
Sep  8 00:17:42 pelle kernel: [   13.133252]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:17:42 pelle kernel: [   13.133269]   domain 1: span 0-1 level MC
Sep  8 00:17:42 pelle kernel: [   13.133277]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:17:44 pelle modem-manager: (ttyHS0) closing serial device...
Sep  8 00:17:44 pelle modem-manager: (ttyHS1) closing serial device...
Sep  8 00:17:44 pelle modem-manager: (ttyHS3) closing serial device...
Sep  8 00:17:44 pelle modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 as /org/freedesktop/ModemManager/Modems/0
Sep  8 00:17:44 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS0
Sep  8 00:17:44 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS1
Sep  8 00:17:44 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS3
Sep  8 00:17:44 pelle NetworkManager: <info>  (hso0): new GSM device (driver: 'hso')
Sep  8 00:17:44 pelle NetworkManager: <info>  (hso0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep  8 00:17:44 pelle NetworkManager: <info>  (hso0): now managed
Sep  8 00:17:44 pelle NetworkManager: <info>  (hso0): device state change: 1 -> 2 (reason 2)
Sep  8 00:17:44 pelle NetworkManager: <info>  (hso0): deactivating device (reason: 2).
Sep  8 00:17:44 pelle NetworkManager: <info>  (hso0): device state change: 2 -> 3 (reason 0)
Sep  8 00:17:44 pelle kernel: [   16.042801] CPU0 attaching NULL sched-domain.
Sep  8 00:17:44 pelle kernel: [   16.042817] CPU1 attaching NULL sched-domain.
Sep  8 00:17:44 pelle kernel: [   16.068175] CPU0 attaching sched-domain:
Sep  8 00:17:44 pelle kernel: [   16.068186]  domain 0: span 0-1 level SIBLING
Sep  8 00:17:44 pelle kernel: [   16.068194]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:17:44 pelle kernel: [   16.068212]   domain 1: span 0-1 level MC
Sep  8 00:17:44 pelle kernel: [   16.068219]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:17:44 pelle kernel: [   16.068235] CPU1 attaching sched-domain:
Sep  8 00:17:44 pelle kernel: [   16.068242]  domain 0: span 0-1 level SIBLING
Sep  8 00:17:44 pelle kernel: [   16.068249]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:17:44 pelle kernel: [   16.068266]   domain 1: span 0-1 level MC
Sep  8 00:17:44 pelle kernel: [   16.068274]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:17:55 pelle modem-manager: (ttyHS2) closing serial device...
Sep  8 00:18:36 pelle kernel: [   67.725212] __ratelimit: 9 callbacks suppressed
Sep  8 00:18:36 pelle kernel: [   67.725225] python[1333]: segfault at 0 ip (null) sp bff0fddc error 4 in cupsext.so[110000+6000]
Sep  8 00:18:37 pelle kernel: Kernel logging (proc) stopped.
Sep  8 00:19:08 pelle kernel: imklog 4.2.0, log source = /proc/kmsg started.
Sep  8 00:19:08 pelle kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep  8 00:19:08 pelle kernel: [    0.000000] Initializing cgroup subsys cpu
Sep  8 00:19:08 pelle kernel: [    0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
Sep  8 00:19:08 pelle kernel: [    0.000000] KERNEL supported cpus:
Sep  8 00:19:08 pelle kernel: [    0.000000]   Intel GenuineIntel
Sep  8 00:19:08 pelle kernel: [    0.000000]   AMD AuthenticAMD
Sep  8 00:19:08 pelle kernel: [    0.000000]   NSC Geode by NSC
Sep  8 00:19:08 pelle kernel: [    0.000000]   Cyrix CyrixInstead
Sep  8 00:19:08 pelle kernel: [    0.000000]   Centaur CentaurHauls
Sep  8 00:19:08 pelle kernel: [    0.000000]   Transmeta GenuineTMx86
Sep  8 00:19:08 pelle kernel: [    0.000000]   Transmeta TransmetaCPU
Sep  8 00:19:08 pelle kernel: [    0.000000]   UMC UMC UMC UMC
Sep  8 00:19:08 pelle kernel: [    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:19:08 pelle kernel: [    0.000000] BIOS-provided physical RAM map:
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000] DMI 2.4 present.
Sep  8 00:19:08 pelle kernel: [    0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
Sep  8 00:19:08 pelle kernel: [    0.000000] MTRR default type: uncachable
Sep  8 00:19:08 pelle kernel: [    0.000000] MTRR fixed ranges enabled:
Sep  8 00:19:08 pelle kernel: [    0.000000]   00000-9FFFF write-back
Sep  8 00:19:08 pelle kernel: [    0.000000]   A0000-BFFFF uncachable
Sep  8 00:19:08 pelle kernel: [    0.000000]   C0000-C7FFF write-protect
Sep  8 00:19:08 pelle kernel: [    0.000000]   C8000-EFFFF uncachable
Sep  8 00:19:08 pelle kernel: [    0.000000]   F0000-FFFFF write-protect
Sep  8 00:19:08 pelle kernel: [    0.000000] MTRR variable ranges enabled:
Sep  8 00:19:08 pelle kernel: [    0.000000]   0 base 0FFFE0000 mask 0FFFE0000 write-protect
Sep  8 00:19:08 pelle kernel: [    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
Sep  8 00:19:08 pelle kernel: [    0.000000]   2 base 000000000 mask 0E0000000 write-back
Sep  8 00:19:08 pelle kernel: [    0.000000]   3 base 020000000 mask 0E0000000 write-back
Sep  8 00:19:08 pelle kernel: [    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
Sep  8 00:19:08 pelle kernel: [    0.000000]   5 base 03F600000 mask 0FFE00000 uncachable
Sep  8 00:19:08 pelle kernel: [    0.000000]   6 base 03F500000 mask 0FFF00000 uncachable
Sep  8 00:19:08 pelle kernel: [    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
Sep  8 00:19:08 pelle kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep  8 00:19:08 pelle kernel: [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000] Scanning 1 areas for low memory corruption
Sep  8 00:19:08 pelle kernel: [    0.000000] modified physical RAM map:
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:19:08 pelle kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Sep  8 00:19:08 pelle kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Sep  8 00:19:08 pelle kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Sep  8 00:19:08 pelle kernel: [    0.000000]  0000000000 - 00377fe000 page 4k
Sep  8 00:19:08 pelle kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 8e2000-9c3000
Sep  8 00:19:08 pelle kernel: [    0.000000] RAMDISK: 2ef3e000 - 2f6d8324
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: RSDP 000fe020 00024 (v02 INTEL )
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: XSDT 3f4fe120 00064 (v01 INTEL  Napa     00000001      01000013)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: FACP 3f4fc000 000F4 (v04 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: DSDT 3f4f2000 05DE4 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: FACS 3f488000 00040
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: SSDT 3f4fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: HPET 3f4fb000 00038 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: APIC 3f4fa000 00068 (v02 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: MCFG 3f4f9000 0003C (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: SLIC 3f4f1000 00180 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: BOOT 3f4f0000 00028 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:19:08 pelle kernel: [    0.000000] 125MB HIGHMEM available.
Sep  8 00:19:08 pelle kernel: [    0.000000] 887MB LOWMEM available.
Sep  8 00:19:08 pelle kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Sep  8 00:19:08 pelle kernel: [    0.000000]   low ram: 0 - 377fe000
Sep  8 00:19:08 pelle kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Sep  8 00:19:08 pelle kernel: [    0.000000]   node 0 bootmap 00007000 - 0000df00
Sep  8 00:19:08 pelle kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Sep  8 00:19:08 pelle kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Sep  8 00:19:08 pelle kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Sep  8 00:19:08 pelle kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Sep  8 00:19:08 pelle kernel: [    0.000000]   #3 [0000100000 - 00008ddeb8]    TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
Sep  8 00:19:08 pelle kernel: [    0.000000]   #4 [002ef3e000 - 002f6d8324]          RAMDISK ==> [002ef3e000 - 002f6d8324]
Sep  8 00:19:08 pelle kernel: [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Sep  8 00:19:08 pelle kernel: [    0.000000]   #6 [00008de000 - 00008e1244]              BRK ==> [00008de000 - 00008e1244]
Sep  8 00:19:08 pelle kernel: [    0.000000]   #7 [00008e2000 - 00009bd000]          PGTABLE ==> [00008e2000 - 00009bd000]
Sep  8 00:19:08 pelle kernel: [    0.000000]   #8 [0000007000 - 000000e000]          BOOTMAP ==> [0000007000 - 000000e000]
Sep  8 00:19:08 pelle kernel: [    0.000000] Zone PFN ranges:
Sep  8 00:19:08 pelle kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Sep  8 00:19:08 pelle kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Sep  8 00:19:08 pelle kernel: [    0.000000]   HighMem  0x000377fe -> 0x0003f500
Sep  8 00:19:08 pelle kernel: [    0.000000] Movable zone start PFN for each node
Sep  8 00:19:08 pelle kernel: [    0.000000] early_node_map[6] active PFN ranges
Sep  8 00:19:08 pelle kernel: [    0.000000]     0: 0x00000000 -> 0x00000002
Sep  8 00:19:08 pelle kernel: [    0.000000]     0: 0x00000006 -> 0x0000009f
Sep  8 00:19:08 pelle kernel: [    0.000000]     0: 0x00000100 -> 0x0003f376
Sep  8 00:19:08 pelle kernel: [    0.000000]     0: 0x0003f3bf -> 0x0003f46d
Sep  8 00:19:08 pelle kernel: [    0.000000]     0: 0x0003f4bf -> 0x0003f4f0
Sep  8 00:19:08 pelle kernel: [    0.000000]     0: 0x0003f4ff -> 0x0003f500
Sep  8 00:19:08 pelle kernel: [    0.000000] On node 0 totalpages: 259057
Sep  8 00:19:08 pelle kernel: [    0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000
Sep  8 00:19:08 pelle kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Sep  8 00:19:08 pelle kernel: [    0.000000]   DMA zone: 0 pages reserved
Sep  8 00:19:08 pelle kernel: [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
Sep  8 00:19:08 pelle kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Sep  8 00:19:08 pelle kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Sep  8 00:19:08 pelle kernel: [    0.000000]   HighMem zone: 251 pages used for memmap
Sep  8 00:19:08 pelle kernel: [    0.000000]   HighMem zone: 31581 pages, LIFO batch:7
Sep  8 00:19:08 pelle kernel: [    0.000000] Using APIC driver default
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Sep  8 00:19:08 pelle kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: IRQ2 used by override.
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep  8 00:19:08 pelle kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep  8 00:19:08 pelle kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep  8 00:19:08 pelle kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep  8 00:19:08 pelle kernel: [    0.000000] nr_irqs_gsi: 24
Sep  8 00:19:08 pelle kernel: [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Sep  8 00:19:08 pelle kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep  8 00:19:08 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Sep  8 00:19:08 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Sep  8 00:19:08 pelle kernel: [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Sep  8 00:19:08 pelle kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep  8 00:19:08 pelle kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Sep  8 00:19:08 pelle kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536
Sep  8 00:19:08 pelle kernel: [    0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
Sep  8 00:19:08 pelle kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 
Sep  8 00:19:08 pelle kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257030
Sep  8 00:19:08 pelle kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=05e65f51-4919-405f-ae5e-374a2ae344e8 ro quiet splash
Sep  8 00:19:08 pelle kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Sep  8 00:19:08 pelle kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep  8 00:19:08 pelle kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep  8 00:19:08 pelle kernel: [    0.000000] Enabling fast FPU save and restore... done.
Sep  8 00:19:08 pelle kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Sep  8 00:19:08 pelle kernel: [    0.000000] Initializing CPU#0
Sep  8 00:19:08 pelle kernel: [    0.000000] allocated 5186560 bytes of page_cgroup
Sep  8 00:19:08 pelle kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep  8 00:19:08 pelle kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
Sep  8 00:19:08 pelle kernel: [    0.000000] Memory: 1004836k/1037312k available (4679k kernel code, 30884k reserved, 2124k data, 660k init, 127328k highmem)
Sep  8 00:19:08 pelle kernel: [    0.000000] virtual kernel memory layout:
Sep  8 00:19:08 pelle kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Sep  8 00:19:08 pelle kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Sep  8 00:19:08 pelle kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Sep  8 00:19:08 pelle kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Sep  8 00:19:08 pelle kernel: [    0.000000]       .init : 0xc07a5000 - 0xc084a000   ( 660 kB)
Sep  8 00:19:08 pelle kernel: [    0.000000]       .data : 0xc0591e33 - 0xc07a4e88   (2124 kB)
Sep  8 00:19:08 pelle kernel: [    0.000000]       .text : 0xc0100000 - 0xc0591e33   (4679 kB)
Sep  8 00:19:08 pelle kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Sep  8 00:19:08 pelle kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep  8 00:19:08 pelle kernel: [    0.000000] Hierarchical RCU implementation.
Sep  8 00:19:08 pelle kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Sep  8 00:19:08 pelle kernel: [    0.000000] Console: colour VGA+ 80x25
Sep  8 00:19:08 pelle kernel: [    0.000000] console [tty0] enabled
Sep  8 00:19:08 pelle kernel: [    0.000000] hpet clockevent registered
Sep  8 00:19:08 pelle kernel: [    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Sep  8 00:19:08 pelle kernel: [    0.000000] Fast TSC calibration using PIT
Sep  8 00:19:08 pelle kernel: [    0.000000] Detected 1596.145 MHz processor.
Sep  8 00:19:08 pelle kernel: [    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.29 BogoMIPS (lpj=6384580)
Sep  8 00:19:08 pelle kernel: [    0.004048] Security Framework initialized
Sep  8 00:19:08 pelle kernel: [    0.004092] AppArmor: AppArmor initialized
Sep  8 00:19:08 pelle kernel: [    0.004109] Mount-cache hash table entries: 512
Sep  8 00:19:08 pelle kernel: [    0.004358] Initializing cgroup subsys ns
Sep  8 00:19:08 pelle kernel: [    0.004368] Initializing cgroup subsys cpuacct
Sep  8 00:19:08 pelle kernel: [    0.004379] Initializing cgroup subsys memory
Sep  8 00:19:08 pelle kernel: [    0.004393] Initializing cgroup subsys devices
Sep  8 00:19:08 pelle kernel: [    0.004400] Initializing cgroup subsys freezer
Sep  8 00:19:08 pelle kernel: [    0.004405] Initializing cgroup subsys net_cls
Sep  8 00:19:08 pelle kernel: [    0.004440] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:19:08 pelle kernel: [    0.004449] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:19:08 pelle kernel: [    0.004456] CPU: L2 cache: 512K
Sep  8 00:19:08 pelle kernel: [    0.004461] CPU: Physical Processor ID: 0
Sep  8 00:19:08 pelle kernel: [    0.004466] CPU: Processor Core ID: 0
Sep  8 00:19:08 pelle kernel: [    0.004473] mce: CPU supports 5 MCE banks
Sep  8 00:19:08 pelle kernel: [    0.004491] CPU0: Thermal monitoring enabled (TM1)
Sep  8 00:19:08 pelle kernel: [    0.004500] using mwait in idle threads.
Sep  8 00:19:08 pelle kernel: [    0.004513] Performance Events: Atom events, Intel PMU driver.
Sep  8 00:19:08 pelle kernel: [    0.004531] ... version:                3
Sep  8 00:19:08 pelle kernel: [    0.004536] ... bit width:              40
Sep  8 00:19:08 pelle kernel: [    0.004540] ... generic registers:      2
Sep  8 00:19:08 pelle kernel: [    0.004545] ... value mask:             000000ffffffffff
Sep  8 00:19:08 pelle kernel: [    0.004551] ... max period:             000000007fffffff
Sep  8 00:19:08 pelle kernel: [    0.004556] ... fixed-purpose events:   3
Sep  8 00:19:08 pelle kernel: [    0.004560] ... event mask:             0000000700000003
Sep  8 00:19:08 pelle kernel: [    0.004570] Checking 'hlt' instruction... OK.
Sep  8 00:19:08 pelle kernel: [    0.020009] Disabling 4MB page tables to avoid TLB bug
Sep  8 00:19:08 pelle kernel: [    0.024448] ACPI: Core revision 20090903
Sep  8 00:19:08 pelle kernel: [    0.040018] ftrace: converting mcount calls to 0f 1f 44 00 00
Sep  8 00:19:08 pelle kernel: [    0.040031] ftrace: allocating 21780 entries in 43 pages
Sep  8 00:19:08 pelle kernel: [    0.044110] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep  8 00:19:08 pelle kernel: [    0.044518] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep  8 00:19:08 pelle kernel: [    0.086488] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:19:08 pelle kernel: [    0.088001] Booting processor 1 APIC 0x1 ip 0x6000
Sep  8 00:19:08 pelle kernel: [    0.008000] Initializing CPU#1
Sep  8 00:19:08 pelle kernel: [    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:19:08 pelle kernel: [    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:19:08 pelle kernel: [    0.008000] CPU: L2 cache: 512K
Sep  8 00:19:08 pelle kernel: [    0.008000] CPU: Physical Processor ID: 0
Sep  8 00:19:08 pelle kernel: [    0.008000] CPU: Processor Core ID: 0
Sep  8 00:19:08 pelle kernel: [    0.008000] CPU1: Thermal monitoring enabled (TM1)
Sep  8 00:19:08 pelle kernel: [    0.172078] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:19:08 pelle kernel: [    0.172108] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep  8 00:19:08 pelle kernel: [    0.176036] Brought up 2 CPUs
Sep  8 00:19:08 pelle kernel: [    0.176043] Total of 2 processors activated (6384.24 BogoMIPS).
Sep  8 00:19:08 pelle kernel: [    0.176287] CPU0 attaching sched-domain:
Sep  8 00:19:08 pelle kernel: [    0.176297]  domain 0: span 0-1 level SIBLING
Sep  8 00:19:08 pelle kernel: [    0.176302]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:19:08 pelle kernel: [    0.176315]   domain 1: span 0-1 level MC
Sep  8 00:19:08 pelle kernel: [    0.176321]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:19:08 pelle kernel: [    0.176333] CPU1 attaching sched-domain:
Sep  8 00:19:08 pelle kernel: [    0.176338]  domain 0: span 0-1 level SIBLING
Sep  8 00:19:08 pelle kernel: [    0.176343]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:19:08 pelle kernel: [    0.176355]   domain 1: span 0-1 level MC
Sep  8 00:19:08 pelle kernel: [    0.176360]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:19:08 pelle kernel: [    0.176592] devtmpfs: initialized
Sep  8 00:19:08 pelle kernel: [    0.176592] regulator: core version 0.5
Sep  8 00:19:08 pelle kernel: [    0.176592] Time: 21:18:56  Date: 09/07/10
Sep  8 00:19:08 pelle kernel: [    0.176592] NET: Registered protocol family 16
Sep  8 00:19:08 pelle kernel: [    0.176592] Trying to unpack rootfs image as initramfs...
Sep  8 00:19:08 pelle kernel: [    0.176592] EISA bus registered
Sep  8 00:19:08 pelle kernel: [    0.176607] ACPI: bus type pci registered
Sep  8 00:19:08 pelle kernel: [    0.176781] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Sep  8 00:19:08 pelle kernel: [    0.176791] PCI: MCFG area at e0000000 reserved in E820
Sep  8 00:19:08 pelle kernel: [    0.176797] PCI: Using MMCONFIG for extended config space
Sep  8 00:19:08 pelle kernel: [    0.176804] PCI: Using configuration type 1 for base access
Sep  8 00:19:08 pelle kernel: [    0.181790] bio: create slab <bio-0> at 0
Sep  8 00:19:08 pelle kernel: [    0.184358] ACPI: EC: Look up EC in DSDT
Sep  8 00:19:08 pelle kernel: [    0.188632] ACPI: Executed 1 blocks of module-level executable AML code
Sep  8 00:19:08 pelle kernel: [    0.193000] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:19:08 pelle kernel: [    0.193273] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:19:08 pelle kernel: [    0.200442] ACPI: Interpreter enabled
Sep  8 00:19:08 pelle kernel: [    0.200462] ACPI: (supports S0 S3 S4 S5)
Sep  8 00:19:08 pelle kernel: [    0.200534] ACPI: Using IOAPIC for interrupt routing
Sep  8 00:19:08 pelle kernel: [    0.214441] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Sep  8 00:19:08 pelle kernel: [    0.215101] ACPI: No dock devices found.
Sep  8 00:19:08 pelle kernel: [    0.216910] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.216931] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.216954] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
Sep  8 00:19:08 pelle kernel: [    0.217021] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep  8 00:19:08 pelle kernel: [    0.217226] pci 0000:00:02.0: reg 10 32bit mmio: [0x56380000-0x563fffff]
Sep  8 00:19:08 pelle kernel: [    0.217240] pci 0000:00:02.0: reg 14 io port: [0x50c0-0x50c7]
Sep  8 00:19:08 pelle kernel: [    0.217252] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
Sep  8 00:19:08 pelle kernel: [    0.217264] pci 0000:00:02.0: reg 1c 32bit mmio: [0x56400000-0x5643ffff]
Sep  8 00:19:08 pelle kernel: [    0.217333] pci 0000:00:02.1: reg 10 32bit mmio: [0x56300000-0x5637ffff]
Sep  8 00:19:08 pelle kernel: [    0.217496] pci 0000:00:1b.0: reg 10 64bit mmio: [0x56440000-0x56443fff]
Sep  8 00:19:08 pelle kernel: [    0.217581] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep  8 00:19:08 pelle kernel: [    0.217594] pci 0000:00:1b.0: PME# disabled
Sep  8 00:19:08 pelle kernel: [    0.217728] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep  8 00:19:08 pelle kernel: [    0.217739] pci 0000:00:1c.0: PME# disabled
Sep  8 00:19:08 pelle kernel: [    0.217870] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep  8 00:19:08 pelle kernel: [    0.217881] pci 0000:00:1c.1: PME# disabled
Sep  8 00:19:08 pelle kernel: [    0.218014] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Sep  8 00:19:08 pelle kernel: [    0.218024] pci 0000:00:1c.3: PME# disabled
Sep  8 00:19:08 pelle kernel: [    0.218118] pci 0000:00:1d.0: reg 20 io port: [0x5080-0x509f]
Sep  8 00:19:08 pelle kernel: [    0.218211] pci 0000:00:1d.1: reg 20 io port: [0x5060-0x507f]
Sep  8 00:19:08 pelle kernel: [    0.218306] pci 0000:00:1d.2: reg 20 io port: [0x5040-0x505f]
Sep  8 00:19:08 pelle kernel: [    0.218408] pci 0000:00:1d.3: reg 20 io port: [0x5020-0x503f]
Sep  8 00:19:08 pelle kernel: [    0.218515] pci 0000:00:1d.7: reg 10 32bit mmio: [0x56444400-0x564447ff]
Sep  8 00:19:08 pelle kernel: [    0.218601] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Sep  8 00:19:08 pelle kernel: [    0.218613] pci 0000:00:1d.7: PME# disabled
Sep  8 00:19:08 pelle kernel: [    0.218847] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Sep  8 00:19:08 pelle kernel: [    0.218859] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Sep  8 00:19:08 pelle kernel: [    0.218877] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
Sep  8 00:19:08 pelle kernel: [    0.218969] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
Sep  8 00:19:08 pelle kernel: [    0.218985] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
Sep  8 00:19:08 pelle kernel: [    0.218999] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
Sep  8 00:19:08 pelle kernel: [    0.219014] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
Sep  8 00:19:08 pelle kernel: [    0.219029] pci 0000:00:1f.2: reg 20 io port: [0x50a0-0x50af]
Sep  8 00:19:08 pelle kernel: [    0.219080] pci 0000:00:1f.2: PME# supported from D3hot
Sep  8 00:19:08 pelle kernel: [    0.219090] pci 0000:00:1f.2: PME# disabled
Sep  8 00:19:08 pelle kernel: [    0.219178] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
Sep  8 00:19:08 pelle kernel: [    0.219322] pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
Sep  8 00:19:08 pelle kernel: [    0.219334] pci 0000:00:1c.0: bridge 32bit mmio: [0x55200000-0x562fffff]
Sep  8 00:19:08 pelle kernel: [    0.219350] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
Sep  8 00:19:08 pelle kernel: [    0.219441] pci 0000:02:00.0: reg 10 io port: [0x2000-0x20ff]
Sep  8 00:19:08 pelle kernel: [    0.219479] pci 0000:02:00.0: reg 18 64bit mmio pref: [0x51010000-0x51010fff]
Sep  8 00:19:08 pelle kernel: [    0.219507] pci 0000:02:00.0: reg 20 64bit mmio pref: [0x51000000-0x5100ffff]
Sep  8 00:19:08 pelle kernel: [    0.219525] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
Sep  8 00:19:08 pelle kernel: [    0.219596] pci 0000:02:00.0: supports D1 D2
Sep  8 00:19:08 pelle kernel: [    0.219603] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep  8 00:19:08 pelle kernel: [    0.219615] pci 0000:02:00.0: PME# disabled
Sep  8 00:19:08 pelle kernel: [    0.219727] pci 0000:00:1c.1: bridge io port: [0x2000-0x3fff]
Sep  8 00:19:08 pelle kernel: [    0.219738] pci 0000:00:1c.1: bridge 32bit mmio: [0x54200000-0x551fffff]
Sep  8 00:19:08 pelle kernel: [    0.219754] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
Sep  8 00:19:08 pelle kernel: [    0.219840] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
Sep  8 00:19:08 pelle kernel: [    0.219852] pci 0000:00:1c.3: bridge 32bit mmio: [0x53100000-0x541fffff]
Sep  8 00:19:08 pelle kernel: [    0.219867] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x52100000-0x530fffff]
Sep  8 00:19:08 pelle kernel: [    0.219956] pci 0000:00:1e.0: transparent bridge
Sep  8 00:19:08 pelle kernel: [    0.220047] pci_bus 0000:00: on NUMA node 0
Sep  8 00:19:08 pelle kernel: [    0.220076] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep  8 00:19:08 pelle kernel: [    0.220575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
Sep  8 00:19:08 pelle kernel: [    0.221005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
Sep  8 00:19:08 pelle kernel: [    0.221303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
Sep  8 00:19:08 pelle kernel: [    0.221546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
Sep  8 00:19:08 pelle kernel: [    0.222142] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.222163] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.233883] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:19:08 pelle kernel: [    0.234196] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:19:08 pelle kernel: [    0.234511] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:19:08 pelle kernel: [    0.234835] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:19:08 pelle kernel: [    0.235137] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:19:08 pelle kernel: [    0.235452] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:19:08 pelle kernel: [    0.235770] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:19:08 pelle kernel: [    0.236137] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:19:08 pelle kernel: [    0.236507] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep  8 00:19:08 pelle kernel: [    0.236539] vgaarb: loaded
Sep  8 00:19:08 pelle kernel: [    0.236897] SCSI subsystem initialized
Sep  8 00:19:08 pelle kernel: [    0.237161] libata version 3.00 loaded.
Sep  8 00:19:08 pelle kernel: [    0.237405] usbcore: registered new interface driver usbfs
Sep  8 00:19:08 pelle kernel: [    0.237451] usbcore: registered new interface driver hub
Sep  8 00:19:08 pelle kernel: [    0.237540] usbcore: registered new device driver usb
Sep  8 00:19:08 pelle kernel: [    0.238185] ACPI: WMI: Mapper loaded
Sep  8 00:19:08 pelle kernel: [    0.238192] PCI: Using ACPI for IRQ routing
Sep  8 00:19:08 pelle kernel: [    0.238596] NetLabel: Initializing
Sep  8 00:19:08 pelle kernel: [    0.238603] NetLabel:  domain hash size = 128
Sep  8 00:19:08 pelle kernel: [    0.238608] NetLabel:  protocols = UNLABELED CIPSOv4
Sep  8 00:19:08 pelle kernel: [    0.238642] NetLabel:  unlabeled traffic allowed by default
Sep  8 00:19:08 pelle kernel: [    0.238755] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep  8 00:19:08 pelle kernel: [    0.238771] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Sep  8 00:19:08 pelle kernel: [    0.244158] Switching to clocksource tsc
Sep  8 00:19:08 pelle kernel: [    0.249030] AppArmor: AppArmor Filesystem Enabled
Sep  8 00:19:08 pelle kernel: [    0.249078] pnp: PnP ACPI init
Sep  8 00:19:08 pelle kernel: [    0.249121] ACPI: bus type pnp registered
Sep  8 00:19:08 pelle kernel: [    0.251811] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
Sep  8 00:19:08 pelle kernel: [    0.253520] pnp: PnP ACPI: found 9 devices
Sep  8 00:19:08 pelle kernel: [    0.253527] ACPI: ACPI bus type pnp unregistered
Sep  8 00:19:08 pelle kernel: [    0.253537] PnPBIOS: Disabled by ACPI PNP
Sep  8 00:19:08 pelle kernel: [    0.253570] system 00:01: ioport range 0x200-0x20f has been reserved
Sep  8 00:19:08 pelle kernel: [    0.253582] system 00:01: ioport range 0x600-0x60f has been reserved
Sep  8 00:19:08 pelle kernel: [    0.253592] system 00:01: ioport range 0x610-0x610 has been reserved
Sep  8 00:19:08 pelle kernel: [    0.253601] system 00:01: ioport range 0x800-0x80f has been reserved
Sep  8 00:19:08 pelle kernel: [    0.253611] system 00:01: ioport range 0x400-0x47f has been reserved
Sep  8 00:19:08 pelle kernel: [    0.253620] system 00:01: ioport range 0x500-0x53f has been reserved
Sep  8 00:19:08 pelle kernel: [    0.253632] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Sep  8 00:19:08 pelle kernel: [    0.253643] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Sep  8 00:19:08 pelle kernel: [    0.253653] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Sep  8 00:19:08 pelle kernel: [    0.253663] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Sep  8 00:19:08 pelle kernel: [    0.253673] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Sep  8 00:19:08 pelle kernel: [    0.253684] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Sep  8 00:19:08 pelle kernel: [    0.253695] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Sep  8 00:19:08 pelle kernel: [    0.288886] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
Sep  8 00:19:08 pelle kernel: [    0.288959] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Sep  8 00:19:08 pelle kernel: [    0.288970] pci 0000:00:1c.0:   IO window: 0x4000-0x4fff
Sep  8 00:19:08 pelle kernel: [    0.288982] pci 0000:00:1c.0:   MEM window: 0x55200000-0x562fffff
Sep  8 00:19:08 pelle kernel: [    0.288994] pci 0000:00:1c.0:   PREFETCH window: 0x00000050000000-0x00000050ffffff
Sep  8 00:19:08 pelle kernel: [    0.289015] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Sep  8 00:19:08 pelle kernel: [    0.289024] pci 0000:00:1c.1:   IO window: 0x2000-0x3fff
Sep  8 00:19:08 pelle kernel: [    0.289037] pci 0000:00:1c.1:   MEM window: 0x54200000-0x551fffff
Sep  8 00:19:08 pelle kernel: [    0.289048] pci 0000:00:1c.1:   PREFETCH window: 0x00000051000000-0x000000520fffff
Sep  8 00:19:08 pelle kernel: [    0.289063] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
Sep  8 00:19:08 pelle kernel: [    0.289073] pci 0000:00:1c.3:   IO window: 0x1000-0x1fff
Sep  8 00:19:08 pelle kernel: [    0.289085] pci 0000:00:1c.3:   MEM window: 0x53100000-0x541fffff
Sep  8 00:19:08 pelle kernel: [    0.289096] pci 0000:00:1c.3:   PREFETCH window: 0x00000052100000-0x000000530fffff
Sep  8 00:19:08 pelle kernel: [    0.289112] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
Sep  8 00:19:08 pelle kernel: [    0.289118] pci 0000:00:1e.0:   IO window: disabled
Sep  8 00:19:08 pelle kernel: [    0.289129] pci 0000:00:1e.0:   MEM window: disabled
Sep  8 00:19:08 pelle kernel: [    0.289138] pci 0000:00:1e.0:   PREFETCH window: disabled
Sep  8 00:19:08 pelle kernel: [    0.289218]   alloc irq_desc for 16 on node -1
Sep  8 00:19:08 pelle kernel: [    0.289226]   alloc kstat_irqs on node -1
Sep  8 00:19:08 pelle kernel: [    0.289243] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:19:08 pelle kernel: [    0.289256] pci 0000:00:1c.0: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.289278]   alloc irq_desc for 17 on node -1
Sep  8 00:19:08 pelle kernel: [    0.289284]   alloc kstat_irqs on node -1
Sep  8 00:19:08 pelle kernel: [    0.289295] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:19:08 pelle kernel: [    0.289307] pci 0000:00:1c.1: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.289327]   alloc irq_desc for 19 on node -1
Sep  8 00:19:08 pelle kernel: [    0.289333]   alloc kstat_irqs on node -1
Sep  8 00:19:08 pelle kernel: [    0.289344] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:19:08 pelle kernel: [    0.289355] pci 0000:00:1c.3: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.289372] pci 0000:00:1e.0: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.289383] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Sep  8 00:19:08 pelle kernel: [    0.289392] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Sep  8 00:19:08 pelle kernel: [    0.289400] pci_bus 0000:01: resource 0 io:  [0x4000-0x4fff]
Sep  8 00:19:08 pelle kernel: [    0.289409] pci_bus 0000:01: resource 1 mem: [0x55200000-0x562fffff]
Sep  8 00:19:08 pelle kernel: [    0.289418] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
Sep  8 00:19:08 pelle kernel: [    0.289426] pci_bus 0000:02: resource 0 io:  [0x2000-0x3fff]
Sep  8 00:19:08 pelle kernel: [    0.289435] pci_bus 0000:02: resource 1 mem: [0x54200000-0x551fffff]
Sep  8 00:19:08 pelle kernel: [    0.289443] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x520fffff]
Sep  8 00:19:08 pelle kernel: [    0.289452] pci_bus 0000:03: resource 0 io:  [0x1000-0x1fff]
Sep  8 00:19:08 pelle kernel: [    0.289460] pci_bus 0000:03: resource 1 mem: [0x53100000-0x541fffff]
Sep  8 00:19:08 pelle kernel: [    0.289469] pci_bus 0000:03: resource 2 pref mem [0x52100000-0x530fffff]
Sep  8 00:19:08 pelle kernel: [    0.289478] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
Sep  8 00:19:08 pelle kernel: [    0.289486] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
Sep  8 00:19:08 pelle kernel: [    0.289612] NET: Registered protocol family 2
Sep  8 00:19:08 pelle kernel: [    0.289897] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep  8 00:19:08 pelle kernel: [    0.290930] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep  8 00:19:08 pelle kernel: [    0.292148] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep  8 00:19:08 pelle kernel: [    0.292714] TCP: Hash tables configured (established 131072 bind 65536)
Sep  8 00:19:08 pelle kernel: [    0.292723] TCP reno registered
Sep  8 00:19:08 pelle kernel: [    0.293031] NET: Registered protocol family 1
Sep  8 00:19:08 pelle kernel: [    0.293097] pci 0000:00:02.0: Boot video device
Sep  8 00:19:08 pelle kernel: [    0.293418] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Sep  8 00:19:08 pelle kernel: [    0.293426] Simple Boot Flag at 0x44 set to 0x1
Sep  8 00:19:08 pelle kernel: [    0.293961] cpufreq-nforce2: No nForce2 chipset.
Sep  8 00:19:08 pelle kernel: [    0.294045] Scanning for low memory corruption every 60 seconds
Sep  8 00:19:08 pelle kernel: [    0.294393] audit: initializing netlink socket (disabled)
Sep  8 00:19:08 pelle kernel: [    0.294422] type=2000 audit(1283894336.290:1): initialized
Sep  8 00:19:08 pelle kernel: [    0.316076] highmem bounce pool size: 64 pages
Sep  8 00:19:08 pelle kernel: [    0.316093] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Sep  8 00:19:08 pelle kernel: [    0.321459] VFS: Disk quotas dquot_6.5.2
Sep  8 00:19:08 pelle kernel: [    0.321662] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep  8 00:19:08 pelle kernel: [    0.323776] fuse init (API version 7.13)
Sep  8 00:19:08 pelle kernel: [    0.324095] msgmni has been set to 1714
Sep  8 00:19:08 pelle kernel: [    0.324823] alg: No test for stdrng (krng)
Sep  8 00:19:08 pelle kernel: [    0.325027] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep  8 00:19:08 pelle kernel: [    0.325037] io scheduler noop registered
Sep  8 00:19:08 pelle kernel: [    0.325043] io scheduler anticipatory registered
Sep  8 00:19:08 pelle kernel: [    0.325049] io scheduler deadline registered
Sep  8 00:19:08 pelle kernel: [    0.325188] io scheduler cfq registered (default)
Sep  8 00:19:08 pelle kernel: [    0.325541]   alloc irq_desc for 24 on node -1
Sep  8 00:19:08 pelle kernel: [    0.325549]   alloc kstat_irqs on node -1
Sep  8 00:19:08 pelle kernel: [    0.325572] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
Sep  8 00:19:08 pelle kernel: [    0.325592] pcieport 0000:00:1c.0: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.325870]   alloc irq_desc for 25 on node -1
Sep  8 00:19:08 pelle kernel: [    0.325877]   alloc kstat_irqs on node -1
Sep  8 00:19:08 pelle kernel: [    0.325895] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
Sep  8 00:19:08 pelle kernel: [    0.325913] pcieport 0000:00:1c.1: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.326181]   alloc irq_desc for 26 on node -1
Sep  8 00:19:08 pelle kernel: [    0.326188]   alloc kstat_irqs on node -1
Sep  8 00:19:08 pelle kernel: [    0.326207] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
Sep  8 00:19:08 pelle kernel: [    0.326228] pcieport 0000:00:1c.3: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.326485] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  8 00:19:08 pelle kernel: [    0.326767] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.326787] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.327202] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.327225] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.327572] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.327591] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.327973] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.327991] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.328322] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.328341] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.328660] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.328679] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:19:08 pelle kernel: [    0.328795] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep  8 00:19:08 pelle kernel: [    0.329813] ACPI: AC Adapter [ACAD] (on-line)
Sep  8 00:19:08 pelle kernel: [    0.330093] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Sep  8 00:19:08 pelle kernel: [    0.330104] ACPI: Power Button [PWRB]
Sep  8 00:19:08 pelle kernel: [    0.330238] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Sep  8 00:19:08 pelle kernel: [    0.331018] ACPI: Lid Switch [LID0]
Sep  8 00:19:08 pelle kernel: [    0.331194] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Sep  8 00:19:08 pelle kernel: [    0.331206] ACPI: Sleep Button [SLPB]
Sep  8 00:19:08 pelle kernel: [    0.331393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Sep  8 00:19:08 pelle kernel: [    0.331402] ACPI: Power Button [PWRF]
Sep  8 00:19:08 pelle kernel: [    0.333289] ACPI: SSDT 3f380c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
Sep  8 00:19:08 pelle kernel: [    0.334340] ACPI: SSDT 3f37fe10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
Sep  8 00:19:08 pelle kernel: [    0.335329] Marking TSC unstable due to TSC halts in idle
Sep  8 00:19:08 pelle kernel: [    0.335574] processor LNXCPU:00: registered as cooling_device0
Sep  8 00:19:08 pelle kernel: [    0.336604] ACPI: SSDT 3f380f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
Sep  8 00:19:08 pelle kernel: [    0.337546] ACPI: SSDT 3f37ef10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
Sep  8 00:19:08 pelle kernel: [    0.338281] Switching to clocksource hpet
Sep  8 00:19:08 pelle kernel: [    0.338930] processor LNXCPU:01: registered as cooling_device1
Sep  8 00:19:08 pelle kernel: [    0.348197] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Sep  8 00:19:08 pelle kernel: [    0.349947] ACPI: Battery Slot [BAT1] (battery absent)
Sep  8 00:19:08 pelle kernel: [    0.349978] isapnp: Scanning for PnP cards...
Sep  8 00:19:08 pelle kernel: [    0.352252] brd: module loaded
Sep  8 00:19:08 pelle kernel: [    0.353716] loop: module loaded
Sep  8 00:19:08 pelle kernel: [    0.353993] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Sep  8 00:19:08 pelle kernel: [    0.354263] ata_piix 0000:00:1f.2: version 2.13
Sep  8 00:19:08 pelle kernel: [    0.354298] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:19:08 pelle kernel: [    0.354311] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Sep  8 00:19:08 pelle kernel: [    0.354394] ata_piix 0000:00:1f.2: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.368713] scsi0 : ata_piix
Sep  8 00:19:08 pelle kernel: [    0.396342] scsi1 : ata_piix
Sep  8 00:19:08 pelle kernel: [    0.398986] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x50a0 irq 14
Sep  8 00:19:08 pelle kernel: [    0.398996] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50a8 irq 15
Sep  8 00:19:08 pelle kernel: [    0.400323] Fixed MDIO Bus: probed
Sep  8 00:19:08 pelle kernel: [    0.400435] PPP generic driver version 2.4.2
Sep  8 00:19:08 pelle kernel: [    0.400577] tun: Universal TUN/TAP device driver, 1.6
Sep  8 00:19:08 pelle kernel: [    0.400583] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep  8 00:19:08 pelle kernel: [    0.400834] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep  8 00:19:08 pelle kernel: [    0.400890] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:19:08 pelle kernel: [    0.400925] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.400934] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep  8 00:19:08 pelle kernel: [    0.401029] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep  8 00:19:08 pelle kernel: [    0.401075] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Sep  8 00:19:08 pelle kernel: [    0.401095] ehci_hcd 0000:00:1d.7: debug port 1
Sep  8 00:19:08 pelle kernel: [    0.405001] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Sep  8 00:19:08 pelle kernel: [    0.405038] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56444400
Sep  8 00:19:08 pelle kernel: [    0.436570] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Sep  8 00:19:08 pelle kernel: [    0.436900] usb usb1: configuration #1 chosen from 1 choice
Sep  8 00:19:08 pelle kernel: [    0.436991] hub 1-0:1.0: USB hub found
Sep  8 00:19:08 pelle kernel: [    0.437018] hub 1-0:1.0: 8 ports detected
Sep  8 00:19:08 pelle kernel: [    0.437202] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep  8 00:19:08 pelle kernel: [    0.437253] uhci_hcd: USB Universal Host Controller Interface driver
Sep  8 00:19:08 pelle kernel: [    0.437342] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:19:08 pelle kernel: [    0.437361] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.437370] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep  8 00:19:08 pelle kernel: [    0.437481] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep  8 00:19:08 pelle kernel: [    0.437531] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005080
Sep  8 00:19:08 pelle kernel: [    0.437793] usb usb2: configuration #1 chosen from 1 choice
Sep  8 00:19:08 pelle kernel: [    0.437889] hub 2-0:1.0: USB hub found
Sep  8 00:19:08 pelle kernel: [    0.437913] hub 2-0:1.0: 2 ports detected
Sep  8 00:19:08 pelle kernel: [    0.438034] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:19:08 pelle kernel: [    0.438049] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.438058] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep  8 00:19:08 pelle kernel: [    0.438151] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep  8 00:19:08 pelle kernel: [    0.438211] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005060
Sep  8 00:19:08 pelle kernel: [    0.438454] usb usb3: configuration #1 chosen from 1 choice
Sep  8 00:19:08 pelle kernel: [    0.438537] hub 3-0:1.0: USB hub found
Sep  8 00:19:08 pelle kernel: [    0.438555] hub 3-0:1.0: 2 ports detected
Sep  8 00:19:08 pelle kernel: [    0.438671]   alloc irq_desc for 18 on node -1
Sep  8 00:19:08 pelle kernel: [    0.438678]   alloc kstat_irqs on node -1
Sep  8 00:19:08 pelle kernel: [    0.438692] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:19:08 pelle kernel: [    0.438706] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.438715] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep  8 00:19:08 pelle kernel: [    0.438807] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep  8 00:19:08 pelle kernel: [    0.438865] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
Sep  8 00:19:08 pelle kernel: [    0.439117] usb usb4: configuration #1 chosen from 1 choice
Sep  8 00:19:08 pelle kernel: [    0.439203] hub 4-0:1.0: USB hub found
Sep  8 00:19:08 pelle kernel: [    0.439222] hub 4-0:1.0: 2 ports detected
Sep  8 00:19:08 pelle kernel: [    0.439340] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:19:08 pelle kernel: [    0.439354] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    0.439363] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep  8 00:19:08 pelle kernel: [    0.439460] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep  8 00:19:08 pelle kernel: [    0.439517] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005020
Sep  8 00:19:08 pelle kernel: [    0.439766] usb usb5: configuration #1 chosen from 1 choice
Sep  8 00:19:08 pelle kernel: [    0.439846] hub 5-0:1.0: USB hub found
Sep  8 00:19:08 pelle kernel: [    0.439864] hub 5-0:1.0: 2 ports detected
Sep  8 00:19:08 pelle kernel: [    0.440138] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Sep  8 00:19:08 pelle kernel: [    0.444061] i8042.c: Warning: Keylock active.
Sep  8 00:19:08 pelle kernel: [    0.461843] i8042.c: Detected active multiplexing controller, rev 1.1.
Sep  8 00:19:08 pelle kernel: [    0.472588] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  8 00:19:08 pelle kernel: [    0.472635] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Sep  8 00:19:08 pelle kernel: [    0.472748] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Sep  8 00:19:08 pelle kernel: [    0.472823] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Sep  8 00:19:08 pelle kernel: [    0.472895] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Sep  8 00:19:08 pelle kernel: [    0.473295] mice: PS/2 mouse device common for all mice
Sep  8 00:19:08 pelle kernel: [    0.476759] rtc_cmos 00:03: RTC can wake from S4
Sep  8 00:19:08 pelle kernel: [    0.476906] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep  8 00:19:08 pelle kernel: [    0.476958] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Sep  8 00:19:08 pelle kernel: [    0.477318] device-mapper: uevent: version 1.0.3
Sep  8 00:19:08 pelle kernel: [    0.487139] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Sep  8 00:19:08 pelle kernel: [    0.497498] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Sep  8 00:19:08 pelle kernel: [    0.536307] device-mapper: multipath: version 1.1.0 loaded
Sep  8 00:19:08 pelle kernel: [    0.536320] device-mapper: multipath round-robin: version 1.0.0 loaded
Sep  8 00:19:08 pelle kernel: [    0.560928] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
Sep  8 00:19:08 pelle kernel: [    0.560940] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep  8 00:19:08 pelle kernel: [    0.574059] EISA: Probing bus 0 at eisa.0
Sep  8 00:19:08 pelle kernel: [    0.574074] Cannot allocate resource for EISA slot 1
Sep  8 00:19:08 pelle kernel: [    0.574081] Cannot allocate resource for EISA slot 2
Sep  8 00:19:08 pelle kernel: [    0.574087] Cannot allocate resource for EISA slot 3
Sep  8 00:19:08 pelle kernel: [    0.574094] Cannot allocate resource for EISA slot 4
Sep  8 00:19:08 pelle kernel: [    0.574100] Cannot allocate resource for EISA slot 5
Sep  8 00:19:08 pelle kernel: [    0.574123] EISA: Detected 0 cards.
Sep  8 00:19:08 pelle kernel: [    0.577658] ata1.00: configured for UDMA/133
Sep  8 00:19:08 pelle kernel: [    0.618159] cpuidle: using governor ladder
Sep  8 00:19:08 pelle kernel: [    0.618501] cpuidle: using governor menu
Sep  8 00:19:08 pelle kernel: [    0.619814] TCP cubic registered
Sep  8 00:19:08 pelle kernel: [    0.620359] NET: Registered protocol family 10
Sep  8 00:19:08 pelle kernel: [    0.621648] lo: Disabled Privacy Extensions
Sep  8 00:19:08 pelle kernel: [    0.622578] NET: Registered protocol family 17
Sep  8 00:19:08 pelle kernel: [    0.623710] Using IPI No-Shortcut mode
Sep  8 00:19:08 pelle kernel: [    0.623982] PM: Resume from disk failed.
Sep  8 00:19:08 pelle kernel: [    0.632076] registered taskstats version 1
Sep  8 00:19:08 pelle kernel: [    0.632686]   Magic number: 10:44:348
Sep  8 00:19:08 pelle kernel: [    0.632855] rtc_cmos 00:03: setting system clock to 2010-09-07 21:18:57 UTC (1283894337)
Sep  8 00:19:08 pelle kernel: [    0.632866] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep  8 00:19:08 pelle kernel: [    0.632871] EDD information not available.
Sep  8 00:19:08 pelle kernel: [    0.700656] Freeing initrd memory: 7784k freed
Sep  8 00:19:08 pelle kernel: [    0.704478] isapnp: No Plug & Play device found
Sep  8 00:19:08 pelle kernel: [    0.705510] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
Sep  8 00:19:08 pelle kernel: [    0.706679] sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep  8 00:19:08 pelle kernel: [    0.707678] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Sep  8 00:19:08 pelle kernel: [    0.708256] sd 0:0:0:0: [sda] Write Protect is off
Sep  8 00:19:08 pelle kernel: [    0.708275] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  8 00:19:08 pelle kernel: [    0.708666] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  8 00:19:08 pelle kernel: [    0.709438]  sda: sda1 sda2 <
Sep  8 00:19:08 pelle kernel: [    0.748103] usb 1-5: new high speed USB device using ehci_hcd and address 2
Sep  8 00:19:08 pelle kernel: [    0.748976]  sda5 sda6 sda7 sda8 >
Sep  8 00:19:08 pelle kernel: [    0.780475] sd 0:0:0:0: [sda] Attached SCSI disk
Sep  8 00:19:08 pelle kernel: [    0.780543] Freeing unused kernel memory: 660k freed
Sep  8 00:19:08 pelle kernel: [    0.781191] Write protecting the kernel text: 4680k
Sep  8 00:19:08 pelle kernel: [    0.781274] Write protecting the kernel read-only data: 1844k
Sep  8 00:19:08 pelle kernel: [    0.820972] udev: starting version 151
Sep  8 00:19:08 pelle kernel: [    0.894025] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    0.894036] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    0.904580] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    0.904592] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    1.092536] usb 1-5: configuration #1 chosen from 1 choice
Sep  8 00:19:08 pelle kernel: [    1.170945] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep  8 00:19:08 pelle kernel: [    1.170995] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:19:08 pelle kernel: [    1.171072] r8169 0000:02:00.0: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [    1.171152]   alloc irq_desc for 27 on node -1
Sep  8 00:19:08 pelle kernel: [    1.171160]   alloc kstat_irqs on node -1
Sep  8 00:19:08 pelle kernel: [    1.171189] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
Sep  8 00:19:08 pelle kernel: [    1.173223] eth0: RTL8102e at 0xf804e000, 00:23:8b:0a:17:9d, XID 04a00000 IRQ 27
Sep  8 00:19:08 pelle kernel: [    1.629928] EXT4-fs (sda1): mounted filesystem with ordered data mode
Sep  8 00:19:08 pelle kernel: [    1.633076] usb 4-2: new full speed USB device using uhci_hcd and address 2
Sep  8 00:19:08 pelle kernel: [    1.798300] usb 4-2: configuration #1 chosen from 1 choice
Sep  8 00:19:08 pelle kernel: [    2.065224] atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    2.065241] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    2.072695] atkbd.c: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    2.072708] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    3.259311] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    3.259328] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    3.266792] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    3.266806] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    3.693981] atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    3.693997] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    3.701451] atkbd.c: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    3.701465] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    4.099871] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    4.099887] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    4.107435] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    4.107449] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    4.505857] atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    4.505873] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    4.513323] atkbd.c: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    4.513336] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    4.919163] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    4.919179] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    4.926630] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    4.926643] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    5.314373] atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    5.314389] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    5.321844] atkbd.c: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    5.321857] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    6.347202] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    6.347217] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    6.354056] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    6.354069] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    6.728463] atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    6.728478] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    6.735330] atkbd.c: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    6.735344] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    7.561612] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    7.561627] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    7.569076] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    7.569089] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    7.829622] atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    7.829637] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    7.837042] atkbd.c: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    7.837056] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    8.150094] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    8.150109] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    8.157561] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    8.157574] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    8.449175] atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    8.449192] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    8.456642] atkbd.c: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    8.456654] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    9.012013] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    9.012027] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    9.019485] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    9.019498] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    9.254819] udev: starting version 151
Sep  8 00:19:08 pelle kernel: [    9.278154] Adding 975864k swap on /dev/sda5.  Priority:-1 extents:1 across:975864k 
Sep  8 00:19:08 pelle kernel: [    9.353625] atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    9.353636] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    9.360253] atkbd.c: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    9.360265] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    9.412710] lp: driver loaded but no devices found
Sep  8 00:19:08 pelle kernel: [    9.674316] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    9.674327] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    9.680782] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 00:19:08 pelle kernel: [    9.680794] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 00:19:08 pelle kernel: [    9.716294] Linux agpgart interface v0.103
Sep  8 00:19:08 pelle kernel: [    9.719226] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Sep  8 00:19:08 pelle kernel: [    9.719382] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
Sep  8 00:19:08 pelle kernel: [    9.949371] intel_rng: FWH not detected
Sep  8 00:19:08 pelle kernel: [   10.090053] type=1505 audit(1283894346.955:2):  operation="profile_load" pid=559 name="/sbin/dhclient3"
Sep  8 00:19:08 pelle kernel: [   10.090836] type=1505 audit(1283894346.955:3):  operation="profile_load" pid=559 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:19:08 pelle kernel: [   10.091299] type=1505 audit(1283894346.955:4):  operation="profile_load" pid=559 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:19:08 pelle kernel: [   10.189231] [drm] Initialized drm 1.1.0 20060810
Sep  8 00:19:08 pelle kernel: [   10.207092] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
Sep  8 00:19:08 pelle kernel: [   10.207355] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Sep  8 00:19:08 pelle kernel: [   10.222099] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Sep  8 00:19:08 pelle kernel: [   10.224529] hso: /build/buildd/linux-2.6.32/drivers/net/usb/hso.c: 1.2 Option Wireless
Sep  8 00:19:08 pelle kernel: [   10.231585] hso0: Disabled Privacy Extensions
Sep  8 00:19:08 pelle kernel: [   10.243202] usbcore: registered new interface driver hso
Sep  8 00:19:08 pelle kernel: [   10.273072] Linux video capture interface: v2.00
Sep  8 00:19:08 pelle kernel: [   10.356579] acer-wmi: Acer Laptop ACPI-WMI Extras
Sep  8 00:19:08 pelle kernel: [   10.356590] acer-wmi: Blacklisted hardware detected - not loading
Sep  8 00:19:08 pelle kernel: [   10.450263] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Sep  8 00:19:08 pelle kernel: [   10.459798] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
Sep  8 00:19:08 pelle kernel: [   10.460373] usbcore: registered new interface driver uvcvideo
Sep  8 00:19:08 pelle kernel: [   10.461097] USB Video Class driver (v0.1.0)
Sep  8 00:19:08 pelle kernel: [   10.576273] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:19:08 pelle kernel: [   10.576288] i915 0000:00:02.0: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [   10.603889] acerhdf: Acer Aspire One Fan driver, v.0.5.20
Sep  8 00:19:08 pelle kernel: [   10.603905] acerhdf: Fan control off, to enable do:
Sep  8 00:19:08 pelle kernel: [   10.603911] acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
Sep  8 00:19:08 pelle kernel: [   10.609075] mtrr: no more MTRRs available
Sep  8 00:19:08 pelle kernel: [   10.609085] [drm] MTRR allocation failed.  Graphics performance may suffer.
Sep  8 00:19:08 pelle kernel: [   10.616076] [drm] set up 7M of stolen space
Sep  8 00:19:08 pelle kernel: [   10.766263] [drm] initialized overlay support
Sep  8 00:19:08 pelle kernel: [   11.187894] fb0: inteldrmfb frame buffer device
Sep  8 00:19:08 pelle kernel: [   11.187901] registered panic notifier
Sep  8 00:19:08 pelle kernel: [   11.187917] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep  8 00:19:08 pelle kernel: [   11.187997] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:19:08 pelle kernel: [   11.188065] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep  8 00:19:08 pelle kernel: [   11.197105] vga16fb: initializing
Sep  8 00:19:08 pelle kernel: [   11.197119] vga16fb: mapped to 0xc00a0000
Sep  8 00:19:08 pelle kernel: [   11.197130] vga16fb: not registering due to another framebuffer present
Sep  8 00:19:08 pelle kernel: [   11.299989] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
Sep  8 00:19:08 pelle kernel: [   11.377970] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
Sep  8 00:19:08 pelle kernel: [   11.435931] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
Sep  8 00:19:08 pelle kernel: [   11.535703] Console: switching to colour frame buffer device 128x37
Sep  8 00:19:08 pelle kernel: [   11.739665] type=1505 audit(1283894348.603:5):  operation="profile_load" pid=761 name="/usr/share/gdm/guest-session/Xsession"
Sep  8 00:19:08 pelle kernel: [   11.749887] type=1505 audit(1283894348.615:6):  operation="profile_replace" pid=763 name="/sbin/dhclient3"
Sep  8 00:19:08 pelle kernel: [   11.750695] type=1505 audit(1283894348.615:7):  operation="profile_replace" pid=763 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:19:08 pelle kernel: [   11.751177] type=1505 audit(1283894348.615:8):  operation="profile_replace" pid=763 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:19:08 pelle kernel: [   11.788941] type=1505 audit(1283894348.655:9):  operation="profile_load" pid=764 name="/usr/bin/evince"
Sep  8 00:19:08 pelle kernel: [   11.823025] type=1505 audit(1283894348.687:10):  operation="profile_load" pid=764 name="/usr/bin/evince-previewer"
Sep  8 00:19:08 pelle kernel: [   11.837438] type=1505 audit(1283894348.703:11):  operation="profile_load" pid=764 name="/usr/bin/evince-thumbnailer"
Sep  8 00:19:08 pelle NetworkManager: <info>  starting...
Sep  8 00:19:08 pelle NetworkManager: <info>  Trying to start the modem-manager...
Sep  8 00:19:08 pelle NetworkManager:    SCPlugin-Ifupdown: init!
Sep  8 00:19:08 pelle NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Sep  8 00:19:08 pelle NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Sep  8 00:19:08 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0)
Sep  8 00:19:08 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Sep  8 00:19:08 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0)
Sep  8 00:19:08 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0): no ifupdown configuration found.
Sep  8 00:19:08 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Sep  8 00:19:08 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Sep  8 00:19:08 pelle NetworkManager:    SCPlugin-Ifupdown: end _init.
Sep  8 00:19:08 pelle NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:19:08 pelle NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:19:08 pelle NetworkManager: <info>  Found wwan radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/rfkill/rfkill0) (driver usb)
Sep  8 00:19:08 pelle NetworkManager: <info>  WiFi enabled by radio killswitch; enabled by state file
Sep  8 00:19:08 pelle NetworkManager: <info>  WWAN enabled by radio killswitch; disabled by state file
Sep  8 00:19:08 pelle NetworkManager:    SCPlugin-Ifupdown: (150745328) ... get_connections.
Sep  8 00:19:08 pelle NetworkManager:    SCPlugin-Ifupdown: (150745328) ... get_connections (managed=false): return empty list.
Sep  8 00:19:08 pelle modem-manager: Loaded plugin MotoC
Sep  8 00:19:08 pelle modem-manager: Loaded plugin Gobi
Sep  8 00:19:08 pelle modem-manager: Loaded plugin Huawei
Sep  8 00:19:08 pelle modem-manager: Loaded plugin Nokia
Sep  8 00:19:08 pelle modem-manager: Loaded plugin ZTE
Sep  8 00:19:08 pelle modem-manager: Loaded plugin Option
Sep  8 00:19:08 pelle modem-manager: Loaded plugin Sierra
Sep  8 00:19:08 pelle modem-manager: Loaded plugin Novatel
Sep  8 00:19:08 pelle modem-manager: Loaded plugin Ericsson MBM
Sep  8 00:19:08 pelle modem-manager: Loaded plugin Generic
Sep  8 00:19:08 pelle modem-manager: Loaded plugin Option High-Speed
Sep  8 00:19:08 pelle modem-manager: Loaded plugin AnyData
Sep  8 00:19:08 pelle modem-manager: Loaded plugin Longcheer
Sep  8 00:19:08 pelle NetworkManager:    Ifupdown: get unmanaged devices count: 0
Sep  8 00:19:08 pelle NetworkManager: <info>  (eth0): carrier is OFF
Sep  8 00:19:08 pelle NetworkManager: <info>  (eth0): new Ethernet device (driver: 'r8169')
Sep  8 00:19:08 pelle NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep  8 00:19:08 pelle NetworkManager: <info>  (eth0): now managed
Sep  8 00:19:08 pelle NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Sep  8 00:19:08 pelle NetworkManager: <info>  (eth0): bringing up device.
Sep  8 00:19:08 pelle kernel: [   12.028073] r8169: eth0: link down
Sep  8 00:19:08 pelle kernel: [   12.031081] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep  8 00:19:08 pelle NetworkManager: <info>  (eth0): preparing device.
Sep  8 00:19:08 pelle NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Sep  8 00:19:08 pelle NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0
Sep  8 00:19:08 pelle NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Sep  8 00:19:08 pelle NetworkManager: <info>  modem-manager is now available
Sep  8 00:19:08 pelle NetworkManager: <info>  Trying to start the supplicant...
Sep  8 00:19:09 pelle modem-manager: (ttyHS0) opening serial device...
Sep  8 00:19:09 pelle modem-manager: (ttyHS0): probe requested by plugin 'Option High-Speed'
Sep  8 00:19:09 pelle modem-manager: (ttyHS1) opening serial device...
Sep  8 00:19:09 pelle modem-manager: (ttyHS1): probe requested by plugin 'Option High-Speed'
Sep  8 00:19:09 pelle modem-manager: (ttyHS2) opening serial device...
Sep  8 00:19:09 pelle modem-manager: (ttyHS2): probe requested by plugin 'Option High-Speed'
Sep  8 00:19:09 pelle modem-manager: (ttyHS3) opening serial device...
Sep  8 00:19:09 pelle modem-manager: (ttyHS3): probe requested by plugin 'Option High-Speed'
Sep  8 00:19:09 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port hso0
Sep  8 00:19:09 pelle modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2
Sep  8 00:19:09 pelle kernel: [   12.782731] ppdev: user-space parallel port driver
Sep  8 00:19:10 pelle kernel: [   13.570168] CPU0 attaching NULL sched-domain.
Sep  8 00:19:10 pelle kernel: [   13.570184] CPU1 attaching NULL sched-domain.
Sep  8 00:19:10 pelle kernel: [   13.605203] CPU0 attaching sched-domain:
Sep  8 00:19:10 pelle kernel: [   13.605216]  domain 0: span 0-1 level SIBLING
Sep  8 00:19:10 pelle kernel: [   13.605224]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:19:10 pelle kernel: [   13.605243]   domain 1: span 0-1 level MC
Sep  8 00:19:10 pelle kernel: [   13.605251]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:19:10 pelle kernel: [   13.605268] CPU1 attaching sched-domain:
Sep  8 00:19:10 pelle kernel: [   13.605276]  domain 0: span 0-1 level SIBLING
Sep  8 00:19:10 pelle kernel: [   13.605284]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:19:10 pelle kernel: [   13.605301]   domain 1: span 0-1 level MC
Sep  8 00:19:10 pelle kernel: [   13.605308]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:19:12 pelle modem-manager: (ttyHS0) closing serial device...
Sep  8 00:19:12 pelle modem-manager: (ttyHS1) closing serial device...
Sep  8 00:19:12 pelle modem-manager: (ttyHS3) closing serial device...
Sep  8 00:19:12 pelle modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 as /org/freedesktop/ModemManager/Modems/0
Sep  8 00:19:12 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS0
Sep  8 00:19:12 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS1
Sep  8 00:19:12 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS3
Sep  8 00:19:12 pelle NetworkManager: <info>  (hso0): new GSM device (driver: 'hso')
Sep  8 00:19:12 pelle NetworkManager: <info>  (hso0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep  8 00:19:12 pelle NetworkManager: <info>  (hso0): now managed
Sep  8 00:19:12 pelle NetworkManager: <info>  (hso0): device state change: 1 -> 2 (reason 2)
Sep  8 00:19:12 pelle NetworkManager: <info>  (hso0): deactivating device (reason: 2).
Sep  8 00:19:12 pelle NetworkManager: <info>  (hso0): device state change: 2 -> 3 (reason 0)
Sep  8 00:19:13 pelle kernel: [   16.138819] CPU0 attaching NULL sched-domain.
Sep  8 00:19:13 pelle kernel: [   16.138831] CPU1 attaching NULL sched-domain.
Sep  8 00:19:13 pelle kernel: [   16.160188] CPU0 attaching sched-domain:
Sep  8 00:19:13 pelle kernel: [   16.160201]  domain 0: span 0-1 level SIBLING
Sep  8 00:19:13 pelle kernel: [   16.160210]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:19:13 pelle kernel: [   16.160230]   domain 1: span 0-1 level MC
Sep  8 00:19:13 pelle kernel: [   16.160238]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:19:13 pelle kernel: [   16.160255] CPU1 attaching sched-domain:
Sep  8 00:19:13 pelle kernel: [   16.160263]  domain 0: span 0-1 level SIBLING
Sep  8 00:19:13 pelle kernel: [   16.160271]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:19:13 pelle kernel: [   16.160289]   domain 1: span 0-1 level MC
Sep  8 00:19:13 pelle kernel: [   16.160296]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:19:23 pelle modem-manager: (ttyHS2) closing serial device...
Sep  8 00:19:46 pelle kernel: [   49.942849] __ratelimit: 9 callbacks suppressed
Sep  8 00:19:46 pelle kernel: [   49.942863] python[1332]: segfault at 0 ip (null) sp bfeeb6cc error 4 in libcrypto.so.0.9.8[110000+138000]
Sep  8 00:19:47 pelle kernel: Kernel logging (proc) stopped.
Sep  8 00:20:28 pelle kernel: imklog 4.2.0, log source = /proc/kmsg started.
Sep  8 00:20:29 pelle kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep  8 00:20:29 pelle kernel: [    0.000000] Initializing cgroup subsys cpu
Sep  8 00:20:29 pelle kernel: [    0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
Sep  8 00:20:29 pelle kernel: [    0.000000] KERNEL supported cpus:
Sep  8 00:20:29 pelle kernel: [    0.000000]   Intel GenuineIntel
Sep  8 00:20:29 pelle kernel: [    0.000000]   AMD AuthenticAMD
Sep  8 00:20:29 pelle kernel: [    0.000000]   NSC Geode by NSC
Sep  8 00:20:29 pelle kernel: [    0.000000]   Cyrix CyrixInstead
Sep  8 00:20:29 pelle kernel: [    0.000000]   Centaur CentaurHauls
Sep  8 00:20:29 pelle kernel: [    0.000000]   Transmeta GenuineTMx86
Sep  8 00:20:29 pelle kernel: [    0.000000]   Transmeta TransmetaCPU
Sep  8 00:20:29 pelle kernel: [    0.000000]   UMC UMC UMC UMC
Sep  8 00:20:29 pelle NetworkManager: <info>  starting...
Sep  8 00:20:29 pelle kernel: [    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:20:29 pelle kernel: [    0.000000] BIOS-provided physical RAM map:
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:20:29 pelle NetworkManager: <info>  Trying to start the modem-manager...
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:20:29 pelle NetworkManager:    SCPlugin-Ifupdown: init!
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:20:29 pelle NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:20:29 pelle NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:20:29 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0)
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000] DMI 2.4 present.
Sep  8 00:20:29 pelle kernel: [    0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
Sep  8 00:20:29 pelle modem-manager: Loaded plugin MotoC
Sep  8 00:20:29 pelle kernel: [    0.000000] MTRR default type: uncachable
Sep  8 00:20:29 pelle kernel: [    0.000000] MTRR fixed ranges enabled:
Sep  8 00:20:29 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Sep  8 00:20:29 pelle kernel: [    0.000000]   00000-9FFFF write-back
Sep  8 00:20:29 pelle kernel: [    0.000000]   A0000-BFFFF uncachable
Sep  8 00:20:29 pelle kernel: [    0.000000]   C0000-C7FFF write-protect
Sep  8 00:20:29 pelle kernel: [    0.000000]   C8000-EFFFF uncachable
Sep  8 00:20:29 pelle kernel: [    0.000000]   F0000-FFFFF write-protect
Sep  8 00:20:29 pelle kernel: [    0.000000] MTRR variable ranges enabled:
Sep  8 00:20:29 pelle modem-manager: Loaded plugin Gobi
Sep  8 00:20:29 pelle kernel: [    0.000000]   0 base 0FFFE0000 mask 0FFFE0000 write-protect
Sep  8 00:20:29 pelle kernel: [    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
Sep  8 00:20:29 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0)
Sep  8 00:20:29 pelle kernel: [    0.000000]   2 base 000000000 mask 0E0000000 write-back
Sep  8 00:20:29 pelle kernel: [    0.000000]   3 base 020000000 mask 0E0000000 write-back
Sep  8 00:20:29 pelle kernel: [    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
Sep  8 00:20:29 pelle kernel: [    0.000000]   5 base 03F600000 mask 0FFE00000 uncachable
Sep  8 00:20:29 pelle kernel: [    0.000000]   6 base 03F500000 mask 0FFF00000 uncachable
Sep  8 00:20:29 pelle modem-manager: Loaded plugin Huawei
Sep  8 00:20:29 pelle modem-manager: Loaded plugin Nokia
Sep  8 00:20:29 pelle kernel: [    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
Sep  8 00:20:29 pelle kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep  8 00:20:29 pelle kernel: [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Sep  8 00:20:29 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0): no ifupdown configuration found.
Sep  8 00:20:29 pelle kernel: [    0.000000] Scanning 1 areas for low memory corruption
Sep  8 00:20:29 pelle kernel: [    0.000000] modified physical RAM map:
Sep  8 00:20:29 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
Sep  8 00:20:29 pelle modem-manager: Loaded plugin ZTE
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:20:29 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:20:29 pelle modem-manager: Loaded plugin Option
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:20:29 pelle NetworkManager:    SCPlugin-Ifupdown: end _init.
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:20:29 pelle modem-manager: Loaded plugin Sierra
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:20:29 pelle NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:20:29 pelle modem-manager: Loaded plugin Novatel
Sep  8 00:20:29 pelle NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:20:29 pelle NetworkManager: <info>  Found wwan radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/rfkill/rfkill0) (driver usb)
Sep  8 00:20:29 pelle modem-manager: Loaded plugin Ericsson MBM
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:20:29 pelle modem-manager: Loaded plugin Generic
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:20:29 pelle modem-manager: Loaded plugin Option High-Speed
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:20:29 pelle modem-manager: Loaded plugin AnyData
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:20:29 pelle modem-manager: Loaded plugin Longcheer
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:20:29 pelle kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Sep  8 00:20:29 pelle kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Sep  8 00:20:29 pelle kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Sep  8 00:20:29 pelle kernel: [    0.000000]  0000000000 - 00377fe000 page 4k
Sep  8 00:20:29 pelle kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 8e2000-9c3000
Sep  8 00:20:29 pelle kernel: [    0.000000] RAMDISK: 2ef3e000 - 2f6d8324
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: RSDP 000fe020 00024 (v02 INTEL )
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: XSDT 3f4fe120 00064 (v01 INTEL  Napa     00000001      01000013)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: FACP 3f4fc000 000F4 (v04 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: DSDT 3f4f2000 05DE4 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: FACS 3f488000 00040
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: SSDT 3f4fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: HPET 3f4fb000 00038 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: APIC 3f4fa000 00068 (v02 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: MCFG 3f4f9000 0003C (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: SLIC 3f4f1000 00180 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: BOOT 3f4f0000 00028 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:20:29 pelle kernel: [    0.000000] 125MB HIGHMEM available.
Sep  8 00:20:29 pelle kernel: [    0.000000] 887MB LOWMEM available.
Sep  8 00:20:29 pelle kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Sep  8 00:20:29 pelle kernel: [    0.000000]   low ram: 0 - 377fe000
Sep  8 00:20:29 pelle kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Sep  8 00:20:29 pelle kernel: [    0.000000]   node 0 bootmap 00007000 - 0000df00
Sep  8 00:20:29 pelle kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Sep  8 00:20:29 pelle kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Sep  8 00:20:29 pelle kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Sep  8 00:20:29 pelle kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Sep  8 00:20:29 pelle kernel: [    0.000000]   #3 [0000100000 - 00008ddeb8]    TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
Sep  8 00:20:29 pelle kernel: [    0.000000]   #4 [002ef3e000 - 002f6d8324]          RAMDISK ==> [002ef3e000 - 002f6d8324]
Sep  8 00:20:29 pelle kernel: [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Sep  8 00:20:29 pelle kernel: [    0.000000]   #6 [00008de000 - 00008e1244]              BRK ==> [00008de000 - 00008e1244]
Sep  8 00:20:29 pelle kernel: [    0.000000]   #7 [00008e2000 - 00009bd000]          PGTABLE ==> [00008e2000 - 00009bd000]
Sep  8 00:20:29 pelle kernel: [    0.000000]   #8 [0000007000 - 000000e000]          BOOTMAP ==> [0000007000 - 000000e000]
Sep  8 00:20:29 pelle kernel: [    0.000000] Zone PFN ranges:
Sep  8 00:20:29 pelle kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Sep  8 00:20:29 pelle kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Sep  8 00:20:29 pelle kernel: [    0.000000]   HighMem  0x000377fe -> 0x0003f500
Sep  8 00:20:29 pelle kernel: [    0.000000] Movable zone start PFN for each node
Sep  8 00:20:29 pelle kernel: [    0.000000] early_node_map[6] active PFN ranges
Sep  8 00:20:29 pelle kernel: [    0.000000]     0: 0x00000000 -> 0x00000002
Sep  8 00:20:29 pelle kernel: [    0.000000]     0: 0x00000006 -> 0x0000009f
Sep  8 00:20:29 pelle kernel: [    0.000000]     0: 0x00000100 -> 0x0003f376
Sep  8 00:20:29 pelle kernel: [    0.000000]     0: 0x0003f3bf -> 0x0003f46d
Sep  8 00:20:29 pelle kernel: [    0.000000]     0: 0x0003f4bf -> 0x0003f4f0
Sep  8 00:20:29 pelle kernel: [    0.000000]     0: 0x0003f4ff -> 0x0003f500
Sep  8 00:20:29 pelle kernel: [    0.000000] On node 0 totalpages: 259057
Sep  8 00:20:29 pelle kernel: [    0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000
Sep  8 00:20:29 pelle kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Sep  8 00:20:29 pelle kernel: [    0.000000]   DMA zone: 0 pages reserved
Sep  8 00:20:29 pelle kernel: [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
Sep  8 00:20:29 pelle kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Sep  8 00:20:29 pelle kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Sep  8 00:20:29 pelle kernel: [    0.000000]   HighMem zone: 251 pages used for memmap
Sep  8 00:20:29 pelle kernel: [    0.000000]   HighMem zone: 31581 pages, LIFO batch:7
Sep  8 00:20:29 pelle kernel: [    0.000000] Using APIC driver default
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Sep  8 00:20:29 pelle kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: IRQ2 used by override.
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep  8 00:20:29 pelle kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep  8 00:20:29 pelle kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep  8 00:20:29 pelle kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep  8 00:20:29 pelle kernel: [    0.000000] nr_irqs_gsi: 24
Sep  8 00:20:29 pelle kernel: [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Sep  8 00:20:29 pelle kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep  8 00:20:29 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Sep  8 00:20:29 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Sep  8 00:20:29 pelle kernel: [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Sep  8 00:20:29 pelle kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep  8 00:20:29 pelle kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Sep  8 00:20:29 pelle kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536
Sep  8 00:20:29 pelle kernel: [    0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
Sep  8 00:20:29 pelle kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 
Sep  8 00:20:29 pelle kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257030
Sep  8 00:20:29 pelle kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=05e65f51-4919-405f-ae5e-374a2ae344e8 ro quiet splash
Sep  8 00:20:29 pelle kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Sep  8 00:20:29 pelle kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep  8 00:20:29 pelle kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep  8 00:20:29 pelle kernel: [    0.000000] Enabling fast FPU save and restore... done.
Sep  8 00:20:29 pelle kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Sep  8 00:20:29 pelle kernel: [    0.000000] Initializing CPU#0
Sep  8 00:20:29 pelle kernel: [    0.000000] allocated 5186560 bytes of page_cgroup
Sep  8 00:20:29 pelle kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep  8 00:20:29 pelle kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
Sep  8 00:20:29 pelle kernel: [    0.000000] Memory: 1004836k/1037312k available (4679k kernel code, 30884k reserved, 2124k data, 660k init, 127328k highmem)
Sep  8 00:20:29 pelle kernel: [    0.000000] virtual kernel memory layout:
Sep  8 00:20:29 pelle kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Sep  8 00:20:29 pelle kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Sep  8 00:20:29 pelle kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Sep  8 00:20:29 pelle kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Sep  8 00:20:29 pelle kernel: [    0.000000]       .init : 0xc07a5000 - 0xc084a000   ( 660 kB)
Sep  8 00:20:29 pelle kernel: [    0.000000]       .data : 0xc0591e33 - 0xc07a4e88   (2124 kB)
Sep  8 00:20:29 pelle kernel: [    0.000000]       .text : 0xc0100000 - 0xc0591e33   (4679 kB)
Sep  8 00:20:29 pelle kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Sep  8 00:20:29 pelle kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep  8 00:20:29 pelle kernel: [    0.000000] Hierarchical RCU implementation.
Sep  8 00:20:29 pelle kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Sep  8 00:20:29 pelle kernel: [    0.000000] Console: colour VGA+ 80x25
Sep  8 00:20:29 pelle kernel: [    0.000000] console [tty0] enabled
Sep  8 00:20:29 pelle NetworkManager: <info>  WiFi enabled by radio killswitch; enabled by state file
Sep  8 00:20:29 pelle kernel: [    0.000000] hpet clockevent registered
Sep  8 00:20:29 pelle kernel: [    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Sep  8 00:20:29 pelle kernel: [    0.000000] Fast TSC calibration using PIT
Sep  8 00:20:29 pelle kernel: [    0.000000] Detected 1596.249 MHz processor.
Sep  8 00:20:29 pelle kernel: [    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.49 BogoMIPS (lpj=6384996)
Sep  8 00:20:29 pelle kernel: [    0.004049] Security Framework initialized
Sep  8 00:20:29 pelle kernel: [    0.004092] AppArmor: AppArmor initialized
Sep  8 00:20:29 pelle kernel: [    0.004109] Mount-cache hash table entries: 512
Sep  8 00:20:29 pelle kernel: [    0.004358] Initializing cgroup subsys ns
Sep  8 00:20:29 pelle NetworkManager: <info>  WWAN enabled by radio killswitch; disabled by state file
Sep  8 00:20:29 pelle kernel: [    0.004367] Initializing cgroup subsys cpuacct
Sep  8 00:20:29 pelle kernel: [    0.004379] Initializing cgroup subsys memory
Sep  8 00:20:29 pelle kernel: [    0.004393] Initializing cgroup subsys devices
Sep  8 00:20:29 pelle NetworkManager:    SCPlugin-Ifupdown: (137314544) ... get_connections.
Sep  8 00:20:29 pelle kernel: [    0.004400] Initializing cgroup subsys freezer
Sep  8 00:20:29 pelle kernel: [    0.004405] Initializing cgroup subsys net_cls
Sep  8 00:20:29 pelle kernel: [    0.004440] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:20:29 pelle NetworkManager:    SCPlugin-Ifupdown: (137314544) ... get_connections (managed=false): return empty list.
Sep  8 00:20:29 pelle kernel: [    0.004449] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:20:29 pelle kernel: [    0.004456] CPU: L2 cache: 512K
Sep  8 00:20:29 pelle kernel: [    0.004461] CPU: Physical Processor ID: 0
Sep  8 00:20:29 pelle kernel: [    0.004466] CPU: Processor Core ID: 0
Sep  8 00:20:29 pelle kernel: [    0.004474] mce: CPU supports 5 MCE banks
Sep  8 00:20:29 pelle kernel: [    0.004492] CPU0: Thermal monitoring enabled (TM1)
Sep  8 00:20:29 pelle kernel: [    0.004500] using mwait in idle threads.
Sep  8 00:20:29 pelle kernel: [    0.004513] Performance Events: Atom events, Intel PMU driver.
Sep  8 00:20:29 pelle kernel: [    0.004530] ... version:                3
Sep  8 00:20:29 pelle kernel: [    0.004535] ... bit width:              40
Sep  8 00:20:29 pelle kernel: [    0.004540] ... generic registers:      2
Sep  8 00:20:29 pelle kernel: [    0.004545] ... value mask:             000000ffffffffff
Sep  8 00:20:29 pelle kernel: [    0.004550] ... max period:             000000007fffffff
Sep  8 00:20:29 pelle kernel: [    0.004555] ... fixed-purpose events:   3
Sep  8 00:20:29 pelle kernel: [    0.004560] ... event mask:             0000000700000003
Sep  8 00:20:29 pelle kernel: [    0.004569] Checking 'hlt' instruction... OK.
Sep  8 00:20:29 pelle kernel: [    0.020009] Disabling 4MB page tables to avoid TLB bug
Sep  8 00:20:29 pelle kernel: [    0.024446] ACPI: Core revision 20090903
Sep  8 00:20:29 pelle kernel: [    0.040019] ftrace: converting mcount calls to 0f 1f 44 00 00
Sep  8 00:20:29 pelle kernel: [    0.040031] ftrace: allocating 21780 entries in 43 pages
Sep  8 00:20:29 pelle kernel: [    0.044110] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep  8 00:20:29 pelle kernel: [    0.044514] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep  8 00:20:29 pelle kernel: [    0.086793] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:20:29 pelle kernel: [    0.088001] Booting processor 1 APIC 0x1 ip 0x6000
Sep  8 00:20:29 pelle kernel: [    0.008000] Initializing CPU#1
Sep  8 00:20:29 pelle kernel: [    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:20:29 pelle kernel: [    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:20:29 pelle kernel: [    0.008000] CPU: L2 cache: 512K
Sep  8 00:20:29 pelle kernel: [    0.008000] CPU: Physical Processor ID: 0
Sep  8 00:20:29 pelle kernel: [    0.008000] CPU: Processor Core ID: 0
Sep  8 00:20:29 pelle kernel: [    0.008000] CPU1: Thermal monitoring enabled (TM1)
Sep  8 00:20:29 pelle kernel: [    0.172105] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:20:29 pelle kernel: [    0.172135] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep  8 00:20:29 pelle kernel: [    0.176039] Brought up 2 CPUs
Sep  8 00:20:29 pelle kernel: [    0.176046] Total of 2 processors activated (6384.43 BogoMIPS).
Sep  8 00:20:29 pelle kernel: [    0.176298] CPU0 attaching sched-domain:
Sep  8 00:20:29 pelle kernel: [    0.176309]  domain 0: span 0-1 level SIBLING
Sep  8 00:20:29 pelle kernel: [    0.176315]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:20:29 pelle kernel: [    0.176328]   domain 1: span 0-1 level MC
Sep  8 00:20:29 pelle kernel: [    0.176333]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:20:29 pelle kernel: [    0.176346] CPU1 attaching sched-domain:
Sep  8 00:20:29 pelle kernel: [    0.176350]  domain 0: span 0-1 level SIBLING
Sep  8 00:20:29 pelle kernel: [    0.176356]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:20:29 pelle kernel: [    0.176367]   domain 1: span 0-1 level MC
Sep  8 00:20:29 pelle kernel: [    0.176372]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:20:29 pelle kernel: [    0.176603] devtmpfs: initialized
Sep  8 00:20:29 pelle kernel: [    0.176603] regulator: core version 0.5
Sep  8 00:20:29 pelle kernel: [    0.176603] Time: 21:20:17  Date: 09/07/10
Sep  8 00:20:29 pelle kernel: [    0.176603] NET: Registered protocol family 16
Sep  8 00:20:29 pelle kernel: [    0.176603] Trying to unpack rootfs image as initramfs...
Sep  8 00:20:29 pelle kernel: [    0.176603] EISA bus registered
Sep  8 00:20:29 pelle kernel: [    0.176605] ACPI: bus type pci registered
Sep  8 00:20:29 pelle kernel: [    0.176780] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Sep  8 00:20:29 pelle kernel: [    0.176790] PCI: MCFG area at e0000000 reserved in E820
Sep  8 00:20:29 pelle kernel: [    0.176796] PCI: Using MMCONFIG for extended config space
Sep  8 00:20:29 pelle kernel: [    0.176803] PCI: Using configuration type 1 for base access
Sep  8 00:20:29 pelle kernel: [    0.181834] bio: create slab <bio-0> at 0
Sep  8 00:20:29 pelle kernel: [    0.184388] ACPI: EC: Look up EC in DSDT
Sep  8 00:20:29 pelle kernel: [    0.188658] ACPI: Executed 1 blocks of module-level executable AML code
Sep  8 00:20:29 pelle kernel: [    0.193025] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:20:29 pelle kernel: [    0.193299] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:20:29 pelle kernel: [    0.200446] ACPI: Interpreter enabled
Sep  8 00:20:29 pelle kernel: [    0.200467] ACPI: (supports S0 S3 S4 S5)
Sep  8 00:20:29 pelle kernel: [    0.200540] ACPI: Using IOAPIC for interrupt routing
Sep  8 00:20:29 pelle kernel: [    0.214305] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Sep  8 00:20:29 pelle kernel: [    0.214974] ACPI: No dock devices found.
Sep  8 00:20:29 pelle kernel: [    0.216779] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.216801] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.216826] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
Sep  8 00:20:29 pelle kernel: [    0.216895] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep  8 00:20:29 pelle kernel: [    0.217109] pci 0000:00:02.0: reg 10 32bit mmio: [0x58480000-0x584fffff]
Sep  8 00:20:29 pelle kernel: [    0.217123] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
Sep  8 00:20:29 pelle kernel: [    0.217135] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
Sep  8 00:20:29 pelle kernel: [    0.217147] pci 0000:00:02.0: reg 1c 32bit mmio: [0x58500000-0x5853ffff]
Sep  8 00:20:29 pelle kernel: [    0.217217] pci 0000:00:02.1: reg 10 32bit mmio: [0x58400000-0x5847ffff]
Sep  8 00:20:29 pelle kernel: [    0.217382] pci 0000:00:1b.0: reg 10 64bit mmio: [0x58540000-0x58543fff]
Sep  8 00:20:29 pelle kernel: [    0.217465] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep  8 00:20:29 pelle kernel: [    0.217476] pci 0000:00:1b.0: PME# disabled
Sep  8 00:20:29 pelle kernel: [    0.217603] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep  8 00:20:29 pelle kernel: [    0.217616] pci 0000:00:1c.0: PME# disabled
Sep  8 00:20:29 pelle kernel: [    0.217757] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep  8 00:20:29 pelle kernel: [    0.217769] pci 0000:00:1c.1: PME# disabled
Sep  8 00:20:29 pelle kernel: [    0.217901] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Sep  8 00:20:29 pelle kernel: [    0.217912] pci 0000:00:1c.2: PME# disabled
Sep  8 00:20:29 pelle kernel: [    0.218043] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Sep  8 00:20:29 pelle kernel: [    0.218053] pci 0000:00:1c.3: PME# disabled
Sep  8 00:20:29 pelle kernel: [    0.218147] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
Sep  8 00:20:29 pelle kernel: [    0.218239] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
Sep  8 00:20:29 pelle kernel: [    0.218331] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
Sep  8 00:20:29 pelle kernel: [    0.218433] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
Sep  8 00:20:29 pelle kernel: [    0.218541] pci 0000:00:1d.7: reg 10 32bit mmio: [0x58544400-0x585447ff]
Sep  8 00:20:29 pelle kernel: [    0.218627] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Sep  8 00:20:29 pelle kernel: [    0.218639] pci 0000:00:1d.7: PME# disabled
Sep  8 00:20:29 pelle kernel: [    0.218874] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Sep  8 00:20:29 pelle kernel: [    0.218886] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Sep  8 00:20:29 pelle kernel: [    0.218904] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
Sep  8 00:20:29 pelle kernel: [    0.218998] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
Sep  8 00:20:29 pelle kernel: [    0.219013] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
Sep  8 00:20:29 pelle kernel: [    0.219028] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
Sep  8 00:20:29 pelle kernel: [    0.219043] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
Sep  8 00:20:29 pelle kernel: [    0.219058] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
Sep  8 00:20:29 pelle kernel: [    0.219109] pci 0000:00:1f.2: PME# supported from D3hot
Sep  8 00:20:29 pelle kernel: [    0.219119] pci 0000:00:1f.2: PME# disabled
Sep  8 00:20:29 pelle kernel: [    0.219205] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
Sep  8 00:20:29 pelle kernel: [    0.219348] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
Sep  8 00:20:29 pelle kernel: [    0.219362] pci 0000:00:1c.0: bridge 32bit mmio: [0x57300000-0x583fffff]
Sep  8 00:20:29 pelle kernel: [    0.219379] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
Sep  8 00:20:29 pelle kernel: [    0.219472] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
Sep  8 00:20:29 pelle kernel: [    0.219509] pci 0000:02:00.0: reg 18 64bit mmio pref: [0x51010000-0x51010fff]
Sep  8 00:20:29 pelle kernel: [    0.219537] pci 0000:02:00.0: reg 20 64bit mmio pref: [0x51000000-0x5100ffff]
Sep  8 00:20:29 pelle kernel: [    0.219556] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
Sep  8 00:20:29 pelle kernel: [    0.219627] pci 0000:02:00.0: supports D1 D2
Sep  8 00:20:29 pelle kernel: [    0.219634] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep  8 00:20:29 pelle kernel: [    0.219646] pci 0000:02:00.0: PME# disabled
Sep  8 00:20:29 pelle kernel: [    0.219759] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
Sep  8 00:20:29 pelle kernel: [    0.219770] pci 0000:00:1c.1: bridge 32bit mmio: [0x56300000-0x572fffff]
Sep  8 00:20:29 pelle kernel: [    0.219786] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
Sep  8 00:20:29 pelle kernel: [    0.219954] pci 0000:03:00.0: reg 10 64bit mmio: [0x55200000-0x5520ffff]
Sep  8 00:20:29 pelle kernel: [    0.220343] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
Sep  8 00:20:29 pelle kernel: [    0.220355] pci 0000:00:1c.2: bridge 32bit mmio: [0x55200000-0x562fffff]
Sep  8 00:20:29 pelle kernel: [    0.220371] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52100000-0x530fffff]
Sep  8 00:20:29 pelle kernel: [    0.220459] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
Sep  8 00:20:29 pelle kernel: [    0.220470] pci 0000:00:1c.3: bridge 32bit mmio: [0x54100000-0x551fffff]
Sep  8 00:20:29 pelle kernel: [    0.220485] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53100000-0x540fffff]
Sep  8 00:20:29 pelle kernel: [    0.220575] pci 0000:00:1e.0: transparent bridge
Sep  8 00:20:29 pelle kernel: [    0.220635] pci_bus 0000:00: on NUMA node 0
Sep  8 00:20:29 pelle kernel: [    0.220658] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep  8 00:20:29 pelle kernel: [    0.221165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
Sep  8 00:20:29 pelle kernel: [    0.221566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
Sep  8 00:20:29 pelle kernel: [    0.221870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
Sep  8 00:20:29 pelle kernel: [    0.222112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
Sep  8 00:20:29 pelle kernel: [    0.222341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
Sep  8 00:20:29 pelle kernel: [    0.222917] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.222937] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.235541] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:20:29 pelle kernel: [    0.235857] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:20:29 pelle kernel: [    0.236198] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:20:29 pelle kernel: [    0.236517] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:20:29 pelle kernel: [    0.236818] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:20:29 pelle kernel: [    0.237134] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:20:29 pelle kernel: [    0.237446] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:20:29 pelle kernel: [    0.237748] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:20:29 pelle kernel: [    0.238118] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep  8 00:20:29 pelle kernel: [    0.238152] vgaarb: loaded
Sep  8 00:20:29 pelle kernel: [    0.238504] SCSI subsystem initialized
Sep  8 00:20:29 pelle kernel: [    0.238739] libata version 3.00 loaded.
Sep  8 00:20:29 pelle kernel: [    0.239005] usbcore: registered new interface driver usbfs
Sep  8 00:20:29 pelle kernel: [    0.239058] usbcore: registered new interface driver hub
Sep  8 00:20:29 pelle kernel: [    0.239159] usbcore: registered new device driver usb
Sep  8 00:20:29 pelle kernel: [    0.239836] ACPI: WMI: Mapper loaded
Sep  8 00:20:29 pelle kernel: [    0.239844] PCI: Using ACPI for IRQ routing
Sep  8 00:20:29 pelle kernel: [    0.240331] NetLabel: Initializing
Sep  8 00:20:29 pelle kernel: [    0.240338] NetLabel:  domain hash size = 128
Sep  8 00:20:29 pelle kernel: [    0.240343] NetLabel:  protocols = UNLABELED CIPSOv4
Sep  8 00:20:29 pelle kernel: [    0.240377] NetLabel:  unlabeled traffic allowed by default
Sep  8 00:20:29 pelle kernel: [    0.240489] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep  8 00:20:29 pelle kernel: [    0.240505] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Sep  8 00:20:29 pelle kernel: [    0.244596] Switching to clocksource tsc
Sep  8 00:20:29 pelle kernel: [    0.249026] AppArmor: AppArmor Filesystem Enabled
Sep  8 00:20:29 pelle kernel: [    0.249067] pnp: PnP ACPI init
Sep  8 00:20:29 pelle kernel: [    0.249110] ACPI: bus type pnp registered
Sep  8 00:20:29 pelle kernel: [    0.251793] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
Sep  8 00:20:29 pelle kernel: [    0.253498] pnp: PnP ACPI: found 9 devices
Sep  8 00:20:29 pelle kernel: [    0.253505] ACPI: ACPI bus type pnp unregistered
Sep  8 00:20:29 pelle kernel: [    0.253515] PnPBIOS: Disabled by ACPI PNP
Sep  8 00:20:29 pelle kernel: [    0.253548] system 00:01: ioport range 0x200-0x20f has been reserved
Sep  8 00:20:29 pelle kernel: [    0.253560] system 00:01: ioport range 0x600-0x60f has been reserved
Sep  8 00:20:29 pelle kernel: [    0.253570] system 00:01: ioport range 0x610-0x610 has been reserved
Sep  8 00:20:29 pelle kernel: [    0.253579] system 00:01: ioport range 0x800-0x80f has been reserved
Sep  8 00:20:29 pelle kernel: [    0.253589] system 00:01: ioport range 0x400-0x47f has been reserved
Sep  8 00:20:29 pelle kernel: [    0.253598] system 00:01: ioport range 0x500-0x53f has been reserved
Sep  8 00:20:29 pelle kernel: [    0.253611] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Sep  8 00:20:29 pelle kernel: [    0.253622] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Sep  8 00:20:29 pelle kernel: [    0.253632] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Sep  8 00:20:29 pelle kernel: [    0.253642] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Sep  8 00:20:29 pelle kernel: [    0.253653] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Sep  8 00:20:29 pelle kernel: [    0.253663] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Sep  8 00:20:29 pelle kernel: [    0.253674] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Sep  8 00:20:29 pelle kernel: [    0.288850] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
Sep  8 00:20:29 pelle kernel: [    0.288938] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Sep  8 00:20:29 pelle kernel: [    0.288948] pci 0000:00:1c.0:   IO window: 0x5000-0x5fff
Sep  8 00:20:29 pelle kernel: [    0.288961] pci 0000:00:1c.0:   MEM window: 0x57300000-0x583fffff
Sep  8 00:20:29 pelle kernel: [    0.288973] pci 0000:00:1c.0:   PREFETCH window: 0x00000050000000-0x00000050ffffff
Sep  8 00:20:29 pelle kernel: [    0.288994] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Sep  8 00:20:29 pelle kernel: [    0.289004] pci 0000:00:1c.1:   IO window: 0x3000-0x4fff
Sep  8 00:20:29 pelle kernel: [    0.289016] pci 0000:00:1c.1:   MEM window: 0x56300000-0x572fffff
Sep  8 00:20:29 pelle kernel: [    0.289028] pci 0000:00:1c.1:   PREFETCH window: 0x00000051000000-0x000000520fffff
Sep  8 00:20:29 pelle kernel: [    0.289044] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
Sep  8 00:20:29 pelle kernel: [    0.289053] pci 0000:00:1c.2:   IO window: 0x2000-0x2fff
Sep  8 00:20:29 pelle kernel: [    0.289065] pci 0000:00:1c.2:   MEM window: 0x55200000-0x562fffff
Sep  8 00:20:29 pelle kernel: [    0.289077] pci 0000:00:1c.2:   PREFETCH window: 0x00000052100000-0x000000530fffff
Sep  8 00:20:29 pelle kernel: [    0.289092] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
Sep  8 00:20:29 pelle kernel: [    0.289101] pci 0000:00:1c.3:   IO window: 0x1000-0x1fff
Sep  8 00:20:29 pelle kernel: [    0.289113] pci 0000:00:1c.3:   MEM window: 0x54100000-0x551fffff
Sep  8 00:20:29 pelle kernel: [    0.289125] pci 0000:00:1c.3:   PREFETCH window: 0x00000053100000-0x000000540fffff
Sep  8 00:20:29 pelle kernel: [    0.289140] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
Sep  8 00:20:29 pelle kernel: [    0.289146] pci 0000:00:1e.0:   IO window: disabled
Sep  8 00:20:29 pelle kernel: [    0.289157] pci 0000:00:1e.0:   MEM window: disabled
Sep  8 00:20:29 pelle kernel: [    0.289167] pci 0000:00:1e.0:   PREFETCH window: disabled
Sep  8 00:20:29 pelle kernel: [    0.289205]   alloc irq_desc for 16 on node -1
Sep  8 00:20:29 pelle kernel: [    0.289212]   alloc kstat_irqs on node -1
Sep  8 00:20:29 pelle kernel: [    0.289231] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:20:29 pelle kernel: [    0.289244] pci 0000:00:1c.0: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.289265]   alloc irq_desc for 17 on node -1
Sep  8 00:20:29 pelle kernel: [    0.289271]   alloc kstat_irqs on node -1
Sep  8 00:20:29 pelle kernel: [    0.289283] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:20:29 pelle kernel: [    0.289295] pci 0000:00:1c.1: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.289315]   alloc irq_desc for 18 on node -1
Sep  8 00:20:29 pelle kernel: [    0.289321]   alloc kstat_irqs on node -1
Sep  8 00:20:29 pelle kernel: [    0.289332] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:20:29 pelle kernel: [    0.289343] pci 0000:00:1c.2: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.289363]   alloc irq_desc for 19 on node -1
Sep  8 00:20:29 pelle kernel: [    0.289369]   alloc kstat_irqs on node -1
Sep  8 00:20:29 pelle kernel: [    0.289379] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:20:29 pelle kernel: [    0.289391] pci 0000:00:1c.3: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.289408] pci 0000:00:1e.0: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.289419] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Sep  8 00:20:29 pelle kernel: [    0.289428] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Sep  8 00:20:29 pelle kernel: [    0.289436] pci_bus 0000:01: resource 0 io:  [0x5000-0x5fff]
Sep  8 00:20:29 pelle kernel: [    0.289445] pci_bus 0000:01: resource 1 mem: [0x57300000-0x583fffff]
Sep  8 00:20:29 pelle kernel: [    0.289454] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
Sep  8 00:20:29 pelle kernel: [    0.289463] pci_bus 0000:02: resource 0 io:  [0x3000-0x4fff]
Sep  8 00:20:29 pelle kernel: [    0.289472] pci_bus 0000:02: resource 1 mem: [0x56300000-0x572fffff]
Sep  8 00:20:29 pelle kernel: [    0.289481] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x520fffff]
Sep  8 00:20:29 pelle kernel: [    0.289489] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
Sep  8 00:20:29 pelle kernel: [    0.289497] pci_bus 0000:03: resource 1 mem: [0x55200000-0x562fffff]
Sep  8 00:20:29 pelle kernel: [    0.289506] pci_bus 0000:03: resource 2 pref mem [0x52100000-0x530fffff]
Sep  8 00:20:29 pelle kernel: [    0.289515] pci_bus 0000:04: resource 0 io:  [0x1000-0x1fff]
Sep  8 00:20:29 pelle kernel: [    0.289525] pci_bus 0000:04: resource 1 mem: [0x54100000-0x551fffff]
Sep  8 00:20:29 pelle kernel: [    0.289534] pci_bus 0000:04: resource 2 pref mem [0x53100000-0x540fffff]
Sep  8 00:20:29 pelle kernel: [    0.289544] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
Sep  8 00:20:29 pelle kernel: [    0.289553] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
Sep  8 00:20:29 pelle kernel: [    0.289654] NET: Registered protocol family 2
Sep  8 00:20:29 pelle kernel: [    0.289939] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep  8 00:20:29 pelle kernel: [    0.290935] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep  8 00:20:29 pelle kernel: [    0.292148] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep  8 00:20:29 pelle kernel: [    0.292713] TCP: Hash tables configured (established 131072 bind 65536)
Sep  8 00:20:29 pelle kernel: [    0.292722] TCP reno registered
Sep  8 00:20:29 pelle kernel: [    0.293061] NET: Registered protocol family 1
Sep  8 00:20:29 pelle kernel: [    0.293121] pci 0000:00:02.0: Boot video device
Sep  8 00:20:29 pelle kernel: [    0.293453] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Sep  8 00:20:29 pelle kernel: [    0.293460] Simple Boot Flag at 0x44 set to 0x1
Sep  8 00:20:29 pelle kernel: [    0.293976] cpufreq-nforce2: No nForce2 chipset.
Sep  8 00:20:29 pelle kernel: [    0.294059] Scanning for low memory corruption every 60 seconds
Sep  8 00:20:29 pelle kernel: [    0.294398] audit: initializing netlink socket (disabled)
Sep  8 00:20:29 pelle kernel: [    0.294452] type=2000 audit(1283894417.294:1): initialized
Sep  8 00:20:29 pelle kernel: [    0.316075] highmem bounce pool size: 64 pages
Sep  8 00:20:29 pelle kernel: [    0.316092] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Sep  8 00:20:29 pelle kernel: [    0.321460] VFS: Disk quotas dquot_6.5.2
Sep  8 00:20:29 pelle kernel: [    0.321660] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep  8 00:20:29 pelle kernel: [    0.323772] fuse init (API version 7.13)
Sep  8 00:20:29 pelle kernel: [    0.324094] msgmni has been set to 1714
Sep  8 00:20:29 pelle kernel: [    0.324805] alg: No test for stdrng (krng)
Sep  8 00:20:29 pelle kernel: [    0.325016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep  8 00:20:29 pelle kernel: [    0.325027] io scheduler noop registered
Sep  8 00:20:29 pelle kernel: [    0.325033] io scheduler anticipatory registered
Sep  8 00:20:29 pelle kernel: [    0.325039] io scheduler deadline registered
Sep  8 00:20:29 pelle kernel: [    0.325179] io scheduler cfq registered (default)
Sep  8 00:20:29 pelle kernel: [    0.325539]   alloc irq_desc for 24 on node -1
Sep  8 00:20:29 pelle kernel: [    0.325546]   alloc kstat_irqs on node -1
Sep  8 00:20:29 pelle kernel: [    0.325570] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
Sep  8 00:20:29 pelle kernel: [    0.325589] pcieport 0000:00:1c.0: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.325866]   alloc irq_desc for 25 on node -1
Sep  8 00:20:29 pelle kernel: [    0.325873]   alloc kstat_irqs on node -1
Sep  8 00:20:29 pelle kernel: [    0.325891] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
Sep  8 00:20:29 pelle kernel: [    0.325910] pcieport 0000:00:1c.1: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.326204]   alloc irq_desc for 26 on node -1
Sep  8 00:20:29 pelle kernel: [    0.326211]   alloc kstat_irqs on node -1
Sep  8 00:20:29 pelle kernel: [    0.326231] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
Sep  8 00:20:29 pelle kernel: [    0.326250] pcieport 0000:00:1c.2: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.326558]   alloc irq_desc for 27 on node -1
Sep  8 00:20:29 pelle kernel: [    0.326565]   alloc kstat_irqs on node -1
Sep  8 00:20:29 pelle kernel: [    0.326584] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
Sep  8 00:20:29 pelle kernel: [    0.326602] pcieport 0000:00:1c.3: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.326851] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  8 00:20:29 pelle kernel: [    0.327164] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.327188] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.327542] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.327562] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.327883] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.327902] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.328231] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.328250] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.328634] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.328654] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.328996] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.329018] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.329352] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.329372] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.329692] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.329710] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:20:29 pelle kernel: [    0.329838] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep  8 00:20:29 pelle kernel: [    0.330487] ACPI: AC Adapter [ACAD] (on-line)
Sep  8 00:20:29 pelle kernel: [    0.330771] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Sep  8 00:20:29 pelle kernel: [    0.330782] ACPI: Power Button [PWRB]
Sep  8 00:20:29 pelle kernel: [    0.330919] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Sep  8 00:20:29 pelle kernel: [    0.332241] ACPI: Lid Switch [LID0]
Sep  8 00:20:29 pelle kernel: [    0.332421] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Sep  8 00:20:29 pelle kernel: [    0.332432] ACPI: Sleep Button [SLPB]
Sep  8 00:20:29 pelle kernel: [    0.332613] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Sep  8 00:20:29 pelle kernel: [    0.332622] ACPI: Power Button [PWRF]
Sep  8 00:20:29 pelle kernel: [    0.334525] ACPI: SSDT 3f380c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
Sep  8 00:20:29 pelle kernel: [    0.335576] ACPI: SSDT 3f37fe10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
Sep  8 00:20:29 pelle kernel: [    0.336498] Marking TSC unstable due to TSC halts in idle
Sep  8 00:20:29 pelle kernel: [    0.336782] processor LNXCPU:00: registered as cooling_device0
Sep  8 00:20:29 pelle kernel: [    0.337836] ACPI: SSDT 3f380f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
Sep  8 00:20:29 pelle kernel: [    0.338776] ACPI: SSDT 3f37ef10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
Sep  8 00:20:29 pelle kernel: [    0.339503] Switching to clocksource hpet
Sep  8 00:20:29 pelle kernel: [    0.340288] processor LNXCPU:01: registered as cooling_device1
Sep  8 00:20:29 pelle kernel: [    0.349502] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Sep  8 00:20:29 pelle kernel: [    0.353737] brd: module loaded
Sep  8 00:20:29 pelle kernel: [    0.355404] loop: module loaded
Sep  8 00:20:29 pelle kernel: [    0.355726] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Sep  8 00:20:29 pelle kernel: [    0.356018] ata_piix 0000:00:1f.2: version 2.13
Sep  8 00:20:29 pelle kernel: [    0.356060] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:20:29 pelle kernel: [    0.356074] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Sep  8 00:20:29 pelle kernel: [    0.356159] ata_piix 0000:00:1f.2: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.356452] ACPI: Battery Slot [BAT1] (battery absent)
Sep  8 00:20:29 pelle kernel: [    0.356499] isapnp: Scanning for PnP cards...
Sep  8 00:20:29 pelle kernel: [    0.405694] scsi0 : ata_piix
Sep  8 00:20:29 pelle kernel: [    0.449605] scsi1 : ata_piix
Sep  8 00:20:29 pelle kernel: [    0.452606] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
Sep  8 00:20:29 pelle kernel: [    0.452618] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
Sep  8 00:20:29 pelle kernel: [    0.453981] Fixed MDIO Bus: probed
Sep  8 00:20:29 pelle kernel: [    0.454108] PPP generic driver version 2.4.2
Sep  8 00:20:29 pelle kernel: [    0.454254] tun: Universal TUN/TAP device driver, 1.6
Sep  8 00:20:29 pelle kernel: [    0.454261] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep  8 00:20:29 pelle kernel: [    0.454528] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep  8 00:20:29 pelle kernel: [    0.454591] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:20:29 pelle kernel: [    0.454630] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.454639] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep  8 00:20:29 pelle kernel: [    0.454775] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep  8 00:20:29 pelle kernel: [    0.454824] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Sep  8 00:20:29 pelle kernel: [    0.454845] ehci_hcd 0000:00:1d.7: debug port 1
Sep  8 00:20:29 pelle kernel: [    0.458740] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Sep  8 00:20:29 pelle kernel: [    0.458788] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
Sep  8 00:20:29 pelle kernel: [    0.506362] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Sep  8 00:20:29 pelle kernel: [    0.506728] usb usb1: configuration #1 chosen from 1 choice
Sep  8 00:20:29 pelle kernel: [    0.506827] hub 1-0:1.0: USB hub found
Sep  8 00:20:29 pelle kernel: [    0.506854] hub 1-0:1.0: 8 ports detected
Sep  8 00:20:29 pelle kernel: [    0.507070] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep  8 00:20:29 pelle kernel: [    0.507127] uhci_hcd: USB Universal Host Controller Interface driver
Sep  8 00:20:29 pelle kernel: [    0.507221] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:20:29 pelle kernel: [    0.507243] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.507253] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep  8 00:20:29 pelle kernel: [    0.507391] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep  8 00:20:29 pelle kernel: [    0.507444] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
Sep  8 00:20:29 pelle kernel: [    0.507733] usb usb2: configuration #1 chosen from 1 choice
Sep  8 00:20:29 pelle kernel: [    0.507833] hub 2-0:1.0: USB hub found
Sep  8 00:20:29 pelle kernel: [    0.507858] hub 2-0:1.0: 2 ports detected
Sep  8 00:20:29 pelle kernel: [    0.507992] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:20:29 pelle kernel: [    0.508011] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.508022] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep  8 00:20:29 pelle kernel: [    0.508163] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep  8 00:20:29 pelle kernel: [    0.508230] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
Sep  8 00:20:29 pelle kernel: [    0.508502] usb usb3: configuration #1 chosen from 1 choice
Sep  8 00:20:29 pelle kernel: [    0.508598] hub 3-0:1.0: USB hub found
Sep  8 00:20:29 pelle kernel: [    0.508627] hub 3-0:1.0: 2 ports detected
Sep  8 00:20:29 pelle kernel: [    0.508765] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:20:29 pelle kernel: [    0.508783] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.508792] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep  8 00:20:29 pelle kernel: [    0.508911] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep  8 00:20:29 pelle kernel: [    0.508976] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
Sep  8 00:20:29 pelle kernel: [    0.509314] usb usb4: configuration #1 chosen from 1 choice
Sep  8 00:20:29 pelle kernel: [    0.509416] hub 4-0:1.0: USB hub found
Sep  8 00:20:29 pelle kernel: [    0.509440] hub 4-0:1.0: 2 ports detected
Sep  8 00:20:29 pelle kernel: [    0.509589] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:20:29 pelle kernel: [    0.509607] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    0.509617] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep  8 00:20:29 pelle kernel: [    0.509735] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep  8 00:20:29 pelle kernel: [    0.509803] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
Sep  8 00:20:29 pelle kernel: [    0.510074] usb usb5: configuration #1 chosen from 1 choice
Sep  8 00:20:29 pelle kernel: [    0.510162] hub 5-0:1.0: USB hub found
Sep  8 00:20:29 pelle kernel: [    0.510182] hub 5-0:1.0: 2 ports detected
Sep  8 00:20:29 pelle kernel: [    0.510463] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Sep  8 00:20:29 pelle kernel: [    0.514291] i8042.c: Warning: Keylock active.
Sep  8 00:20:29 pelle kernel: [    0.567020] i8042.c: Detected active multiplexing controller, rev 1.1.
Sep  8 00:20:29 pelle kernel: [    0.572751] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  8 00:20:29 pelle kernel: [    0.572788] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Sep  8 00:20:29 pelle kernel: [    0.572799] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Sep  8 00:20:29 pelle kernel: [    0.572809] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Sep  8 00:20:29 pelle kernel: [    0.572819] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Sep  8 00:20:29 pelle kernel: [    0.573163] mice: PS/2 mouse device common for all mice
Sep  8 00:20:29 pelle kernel: [    0.573625] rtc_cmos 00:03: RTC can wake from S4
Sep  8 00:20:29 pelle kernel: [    0.573740] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep  8 00:20:29 pelle kernel: [    0.573794] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Sep  8 00:20:29 pelle kernel: [    0.574186] device-mapper: uevent: version 1.0.3
Sep  8 00:20:29 pelle kernel: [    0.616883] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
Sep  8 00:20:29 pelle kernel: [    0.616895] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep  8 00:20:29 pelle kernel: [    0.618157] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Sep  8 00:20:29 pelle kernel: [    0.633446] ata1.00: configured for UDMA/133
Sep  8 00:20:29 pelle kernel: [    0.651945] Freeing initrd memory: 7784k freed
Sep  8 00:20:29 pelle kernel: [    0.660265] device-mapper: multipath: version 1.1.0 loaded
Sep  8 00:20:29 pelle kernel: [    0.660277] device-mapper: multipath round-robin: version 1.0.0 loaded
Sep  8 00:20:29 pelle kernel: [    0.660737] EISA: Probing bus 0 at eisa.0
Sep  8 00:20:29 pelle kernel: [    0.660753] Cannot allocate resource for EISA slot 1
Sep  8 00:20:29 pelle kernel: [    0.660760] Cannot allocate resource for EISA slot 2
Sep  8 00:20:29 pelle kernel: [    0.660766] Cannot allocate resource for EISA slot 3
Sep  8 00:20:29 pelle kernel: [    0.660772] Cannot allocate resource for EISA slot 4
Sep  8 00:20:29 pelle kernel: [    0.660778] Cannot allocate resource for EISA slot 5
Sep  8 00:20:29 pelle kernel: [    0.660785] Cannot allocate resource for EISA slot 6
Sep  8 00:20:29 pelle kernel: [    0.660803] EISA: Detected 0 cards.
Sep  8 00:20:29 pelle kernel: [    0.661252] cpuidle: using governor ladder
Sep  8 00:20:29 pelle kernel: [    0.661595] cpuidle: using governor menu
Sep  8 00:20:29 pelle kernel: [    0.662890] TCP cubic registered
Sep  8 00:20:29 pelle kernel: [    0.663400] NET: Registered protocol family 10
Sep  8 00:20:29 pelle kernel: [    0.664731] lo: Disabled Privacy Extensions
Sep  8 00:20:29 pelle kernel: [    0.665667] NET: Registered protocol family 17
Sep  8 00:20:29 pelle kernel: [    0.666767] Using IPI No-Shortcut mode
Sep  8 00:20:29 pelle kernel: [    0.667042] PM: Resume from disk failed.
Sep  8 00:20:29 pelle kernel: [    0.667072] registered taskstats version 1
Sep  8 00:20:29 pelle kernel: [    0.667776]   Magic number: 10:44:348
Sep  8 00:20:29 pelle kernel: [    0.667932] rtc_cmos 00:03: setting system clock to 2010-09-07 21:20:18 UTC (1283894418)
Sep  8 00:20:29 pelle kernel: [    0.667941] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep  8 00:20:29 pelle kernel: [    0.667946] EDD information not available.
Sep  8 00:20:29 pelle kernel: [    0.749171] isapnp: No Plug & Play device found
Sep  8 00:20:29 pelle kernel: [    0.749460] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
Sep  8 00:20:29 pelle kernel: [    0.749827] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Sep  8 00:20:29 pelle kernel: [    0.749894] sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep  8 00:20:29 pelle kernel: [    0.750015] sd 0:0:0:0: [sda] Write Protect is off
Sep  8 00:20:29 pelle kernel: [    0.750024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  8 00:20:29 pelle kernel: [    0.750117] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  8 00:20:29 pelle kernel: [    0.750488]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Sep  8 00:20:29 pelle kernel: [    0.817957] sd 0:0:0:0: [sda] Attached SCSI disk
Sep  8 00:20:29 pelle kernel: [    0.818007] Freeing unused kernel memory: 660k freed
Sep  8 00:20:29 pelle kernel: [    0.818587] Write protecting the kernel text: 4680k
Sep  8 00:20:29 pelle kernel: [    0.818674] Write protecting the kernel read-only data: 1844k
Sep  8 00:20:29 pelle kernel: [    0.858088] udev: starting version 151
Sep  8 00:20:29 pelle kernel: [    0.861149] usb 1-5: new high speed USB device using ehci_hcd and address 2
Sep  8 00:20:29 pelle kernel: [    1.209532] usb 1-5: configuration #1 chosen from 1 choice
Sep  8 00:20:29 pelle kernel: [    1.217329] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep  8 00:20:29 pelle kernel: [    1.217376] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:20:29 pelle kernel: [    1.217455] r8169 0000:02:00.0: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [    1.217534]   alloc irq_desc for 28 on node -1
Sep  8 00:20:29 pelle kernel: [    1.217541]   alloc kstat_irqs on node -1
Sep  8 00:20:29 pelle kernel: [    1.217570] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
Sep  8 00:20:29 pelle kernel: [    1.219527] eth0: RTL8102e at 0xf804e000, 00:23:8b:0a:17:9d, XID 04a00000 IRQ 28
Sep  8 00:20:29 pelle kernel: [    1.399312] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Sep  8 00:20:29 pelle kernel: [    1.633134] usb 4-2: new full speed USB device using uhci_hcd and address 2
Sep  8 00:20:29 pelle kernel: [    1.679906] EXT4-fs (sda1): mounted filesystem with ordered data mode
Sep  8 00:20:29 pelle kernel: [    1.800379] usb 4-2: configuration #1 chosen from 1 choice
Sep  8 00:20:29 pelle kernel: [    9.391338] udev: starting version 151
Sep  8 00:20:29 pelle kernel: [    9.415623] Adding 975864k swap on /dev/sda5.  Priority:-1 extents:1 across:975864k 
Sep  8 00:20:29 pelle kernel: [    9.675020] lp: driver loaded but no devices found
Sep  8 00:20:29 pelle kernel: [    9.744075] Linux agpgart interface v0.103
Sep  8 00:20:29 pelle kernel: [    9.850794] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Sep  8 00:20:29 pelle kernel: [    9.850958] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
Sep  8 00:20:29 pelle kernel: [    9.855555] intel_rng: FWH not detected
Sep  8 00:20:29 pelle kernel: [    9.996875] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
Sep  8 00:20:29 pelle kernel: [    9.997640] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Sep  8 00:20:29 pelle kernel: [   10.000446] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Sep  8 00:20:29 pelle kernel: [   10.349666] type=1505 audit(1283894428.180:2):  operation="profile_load" pid=596 name="/sbin/dhclient3"
Sep  8 00:20:29 pelle kernel: [   10.350491] type=1505 audit(1283894428.180:3):  operation="profile_load" pid=596 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:20:29 pelle kernel: [   10.350962] type=1505 audit(1283894428.180:4):  operation="profile_load" pid=596 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:20:29 pelle kernel: [   10.361330] [drm] Initialized drm 1.1.0 20060810
Sep  8 00:20:29 pelle kernel: [   10.362261] hso: /build/buildd/linux-2.6.32/drivers/net/usb/hso.c: 1.2 Option Wireless
Sep  8 00:20:29 pelle kernel: [   10.363668] hso0: Disabled Privacy Extensions
Sep  8 00:20:29 pelle kernel: [   10.371433] usbcore: registered new interface driver hso
Sep  8 00:20:29 pelle kernel: [   10.413523] Linux video capture interface: v2.00
Sep  8 00:20:29 pelle kernel: [   10.573510] acer-wmi: Acer Laptop ACPI-WMI Extras
Sep  8 00:20:29 pelle kernel: [   10.573523] acer-wmi: Blacklisted hardware detected - not loading
Sep  8 00:20:29 pelle kernel: [   10.575515] cfg80211: Calling CRDA to update world regulatory domain
Sep  8 00:20:29 pelle kernel: [   10.675981] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Sep  8 00:20:29 pelle kernel: [   10.682546] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
Sep  8 00:20:29 pelle kernel: [   10.683064] usbcore: registered new interface driver uvcvideo
Sep  8 00:20:29 pelle kernel: [   10.683201] USB Video Class driver (v0.1.0)
Sep  8 00:20:29 pelle kernel: [   10.715416] acerhdf: Acer Aspire One Fan driver, v.0.5.20
Sep  8 00:20:29 pelle kernel: [   10.715431] acerhdf: Fan control off, to enable do:
Sep  8 00:20:29 pelle kernel: [   10.715437] acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
Sep  8 00:20:29 pelle kernel: [   10.771706] cfg80211: World regulatory domain updated:
Sep  8 00:20:29 pelle kernel: [   10.771716] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep  8 00:20:29 pelle kernel: [   10.771727] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:20:29 pelle kernel: [   10.771736] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:20:29 pelle kernel: [   10.771745] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:20:29 pelle kernel: [   10.771754] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:20:29 pelle kernel: [   10.771763] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:20:29 pelle kernel: [   10.854566] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:20:29 pelle kernel: [   10.854581] i915 0000:00:02.0: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [   10.876141] mtrr: no more MTRRs available
Sep  8 00:20:29 pelle kernel: [   10.876152] [drm] MTRR allocation failed.  Graphics performance may suffer.
Sep  8 00:20:29 pelle kernel: [   10.876311] [drm] set up 7M of stolen space
Sep  8 00:20:29 pelle kernel: [   10.901466] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
Sep  8 00:20:29 pelle kernel: [   10.977101] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Sep  8 00:20:29 pelle kernel: [   10.986153] [drm] initialized overlay support
Sep  8 00:20:29 pelle kernel: [   11.311116] type=1505 audit(1283894429.140:5):  operation="profile_load" pid=754 name="/usr/share/gdm/guest-session/Xsession"
Sep  8 00:20:29 pelle kernel: [   11.315444] type=1505 audit(1283894429.144:6):  operation="profile_replace" pid=755 name="/sbin/dhclient3"
Sep  8 00:20:29 pelle kernel: [   11.316275] type=1505 audit(1283894429.148:7):  operation="profile_replace" pid=755 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:20:29 pelle kernel: [   11.316725] type=1505 audit(1283894429.148:8):  operation="profile_replace" pid=755 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:20:29 pelle kernel: [   11.324380] type=1505 audit(1283894429.156:9):  operation="profile_load" pid=756 name="/usr/bin/evince"
Sep  8 00:20:29 pelle kernel: [   11.350397] type=1505 audit(1283894429.180:10):  operation="profile_load" pid=756 name="/usr/bin/evince-previewer"
Sep  8 00:20:29 pelle kernel: [   11.364562] r8169: eth0: link down
Sep  8 00:20:29 pelle kernel: [   11.365204] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep  8 00:20:29 pelle kernel: [   11.373086] type=1505 audit(1283894429.204:11):  operation="profile_load" pid=756 name="/usr/bin/evince-thumbnailer"
Sep  8 00:20:29 pelle NetworkManager:    Ifupdown: get unmanaged devices count: 0
Sep  8 00:20:29 pelle NetworkManager: <info>  (eth0): carrier is OFF
Sep  8 00:20:29 pelle NetworkManager: <info>  (eth0): new Ethernet device (driver: 'r8169')
Sep  8 00:20:29 pelle NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep  8 00:20:29 pelle NetworkManager: <info>  (eth0): now managed
Sep  8 00:20:29 pelle NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Sep  8 00:20:29 pelle NetworkManager: <info>  (eth0): bringing up device.
Sep  8 00:20:29 pelle kernel: [   11.412529] fb0: inteldrmfb frame buffer device
Sep  8 00:20:29 pelle kernel: [   11.412538] registered panic notifier
Sep  8 00:20:29 pelle kernel: [   11.412558] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep  8 00:20:29 pelle NetworkManager: <info>  (eth0): preparing device.
Sep  8 00:20:29 pelle NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Sep  8 00:20:29 pelle NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0
Sep  8 00:20:29 pelle kernel: [   11.427935] vga16fb: initializing
Sep  8 00:20:29 pelle kernel: [   11.427949] vga16fb: mapped to 0xc00a0000
Sep  8 00:20:29 pelle kernel: [   11.427960] vga16fb: not registering due to another framebuffer present
Sep  8 00:20:29 pelle NetworkManager: <info>  modem-manager is now available
Sep  8 00:20:29 pelle NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Sep  8 00:20:29 pelle NetworkManager: <info>  Trying to start the supplicant...
Sep  8 00:20:29 pelle kernel: [   11.665841] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:20:29 pelle kernel: [   11.665913] ath5k 0000:03:00.0: setting latency timer to 64
Sep  8 00:20:29 pelle kernel: [   11.666879] ath5k 0000:03:00.0: registered as 'phy0'
Sep  8 00:20:29 pelle modem-manager: (ttyHS0) opening serial device...
Sep  8 00:20:29 pelle modem-manager: (ttyHS0): probe requested by plugin 'Option High-Speed'
Sep  8 00:20:29 pelle modem-manager: (ttyHS1) opening serial device...
Sep  8 00:20:29 pelle modem-manager: (ttyHS1): probe requested by plugin 'Option High-Speed'
Sep  8 00:20:29 pelle modem-manager: (ttyHS2) opening serial device...
Sep  8 00:20:29 pelle modem-manager: (ttyHS2): probe requested by plugin 'Option High-Speed'
Sep  8 00:20:29 pelle modem-manager: (ttyHS3) opening serial device...
Sep  8 00:20:29 pelle modem-manager: (ttyHS3): probe requested by plugin 'Option High-Speed'
Sep  8 00:20:29 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port hso0
Sep  8 00:20:29 pelle modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2
Sep  8 00:20:29 pelle kernel: [   11.780621] Console: switching to colour frame buffer device 128x37
Sep  8 00:20:30 pelle kernel: [   12.264274] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:20:30 pelle kernel: [   12.264344] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep  8 00:20:30 pelle kernel: [   12.327803] ath: EEPROM regdomain: 0x65
Sep  8 00:20:30 pelle kernel: [   12.327813] ath: EEPROM indicates we should expect a direct regpair map
Sep  8 00:20:30 pelle kernel: [   12.327824] ath: Country alpha2 being used: 00
Sep  8 00:20:30 pelle kernel: [   12.327830] ath: Regpair used: 0x65
Sep  8 00:20:30 pelle kernel: [   12.382631] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Sep  8 00:20:30 pelle kernel: [   12.444405] phy0: Selected rate control algorithm 'minstrel'
Sep  8 00:20:30 pelle kernel: [   12.446988] Registered led device: ath5k-phy0::rx
Sep  8 00:20:30 pelle kernel: [   12.447064] Registered led device: ath5k-phy0::tx
Sep  8 00:20:30 pelle kernel: [   12.447075] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Sep  8 00:20:30 pelle NetworkManager: <info>  Found wlan radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill1) (driver <unknown>)
Sep  8 00:20:30 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0)
Sep  8 00:20:30 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Sep  8 00:20:30 pelle NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
Sep  8 00:20:30 pelle NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'ath5k')
Sep  8 00:20:30 pelle NetworkManager: <info>  (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep  8 00:20:30 pelle NetworkManager: <info>  (wlan0): now managed
Sep  8 00:20:30 pelle NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Sep  8 00:20:30 pelle NetworkManager: <info>  (wlan0): bringing up device.
Sep  8 00:20:30 pelle kernel: [   12.565102] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep  8 00:20:30 pelle NetworkManager: <info>  (wlan0): preparing device.
Sep  8 00:20:30 pelle NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Sep  8 00:20:31 pelle NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready
Sep  8 00:20:31 pelle NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 42)
Sep  8 00:20:31 pelle kernel: [   13.499876] ppdev: user-space parallel port driver
Sep  8 00:20:32 pelle kernel: [   14.229143] CPU0 attaching NULL sched-domain.
Sep  8 00:20:32 pelle kernel: [   14.229154] CPU1 attaching NULL sched-domain.
Sep  8 00:20:32 pelle kernel: [   14.252673] CPU0 attaching sched-domain:
Sep  8 00:20:32 pelle kernel: [   14.252681]  domain 0: span 0-1 level SIBLING
Sep  8 00:20:32 pelle kernel: [   14.252688]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:20:32 pelle kernel: [   14.252701]   domain 1: span 0-1 level MC
Sep  8 00:20:32 pelle kernel: [   14.252707]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:20:32 pelle kernel: [   14.252719] CPU1 attaching sched-domain:
Sep  8 00:20:32 pelle kernel: [   14.252723]  domain 0: span 0-1 level SIBLING
Sep  8 00:20:32 pelle kernel: [   14.252729]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:20:32 pelle kernel: [   14.252740]   domain 1: span 0-1 level MC
Sep  8 00:20:32 pelle kernel: [   14.252745]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:20:33 pelle modem-manager: (ttyHS0) closing serial device...
Sep  8 00:20:33 pelle modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 as /org/freedesktop/ModemManager/Modems/0
Sep  8 00:20:33 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS0
Sep  8 00:20:33 pelle modem-manager: (ttyHS1) closing serial device...
Sep  8 00:20:33 pelle modem-manager: (ttyHS3) closing serial device...
Sep  8 00:20:33 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS1
Sep  8 00:20:33 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS3
Sep  8 00:20:33 pelle NetworkManager: <info>  (hso0): new GSM device (driver: 'hso')
Sep  8 00:20:33 pelle NetworkManager: <info>  (hso0): exported as /org/freedesktop/NetworkManager/Devices/2
Sep  8 00:20:33 pelle NetworkManager: <info>  (hso0): now managed
Sep  8 00:20:33 pelle NetworkManager: <info>  (hso0): device state change: 1 -> 2 (reason 2)
Sep  8 00:20:33 pelle NetworkManager: <info>  (hso0): deactivating device (reason: 2).
Sep  8 00:20:33 pelle NetworkManager: <info>  (hso0): device state change: 2 -> 3 (reason 0)
Sep  8 00:20:34 pelle kernel: [   17.066566] CPU0 attaching NULL sched-domain.
Sep  8 00:20:34 pelle kernel: [   17.066579] CPU1 attaching NULL sched-domain.
Sep  8 00:20:34 pelle kernel: [   17.089194] CPU0 attaching sched-domain:
Sep  8 00:20:34 pelle kernel: [   17.089206]  domain 0: span 0-1 level SIBLING
Sep  8 00:20:34 pelle kernel: [   17.089215]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:20:34 pelle kernel: [   17.089235]   domain 1: span 0-1 level MC
Sep  8 00:20:34 pelle kernel: [   17.089242]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:20:34 pelle kernel: [   17.089258] CPU1 attaching sched-domain:
Sep  8 00:20:34 pelle kernel: [   17.089266]  domain 0: span 0-1 level SIBLING
Sep  8 00:20:34 pelle kernel: [   17.089274]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:20:34 pelle kernel: [   17.089291]   domain 1: span 0-1 level MC
Sep  8 00:20:34 pelle kernel: [   17.089299]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:20:43 pelle modem-manager: (ttyHS2) closing serial device...
Sep  8 00:20:53 pelle NetworkManager: <info>  Activation (wlan0) starting connection 'Vappugospel XXV'
Sep  8 00:20:53 pelle NetworkManager: <info>  (wlan0): device state change: 3 -> 4 (reason 0)
Sep  8 00:20:53 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep  8 00:20:53 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep  8 00:20:53 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep  8 00:20:53 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep  8 00:20:53 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep  8 00:20:53 pelle NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Sep  8 00:20:53 pelle NetworkManager: <info>  Activation (wlan0/wireless): access point 'Vappugospel XXV' has security, but secrets are required.
Sep  8 00:20:53 pelle NetworkManager: <info>  (wlan0): device state change: 5 -> 6 (reason 0)
Sep  8 00:20:53 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep  8 00:20:58 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> inactive
Sep  8 00:21:11 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep  8 00:21:11 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep  8 00:21:11 pelle NetworkManager: <info>  (wlan0): device state change: 6 -> 4 (reason 0)
Sep  8 00:21:11 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep  8 00:21:11 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep  8 00:21:11 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep  8 00:21:11 pelle NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Sep  8 00:21:11 pelle NetworkManager: <info>  Activation (wlan0/wireless): connection 'Vappugospel XXV' has security, and secrets exist.  No new secrets needed.
Sep  8 00:21:11 pelle NetworkManager: <info>  Config: added 'ssid' value 'Vappugospel XXV'
Sep  8 00:21:11 pelle NetworkManager: <info>  Config: added 'mode' value '1'
Sep  8 00:21:11 pelle NetworkManager: <info>  Config: added 'frequency' value '2412'
Sep  8 00:21:11 pelle NetworkManager: <info>  Config: added 'key_mgmt' value 'NONE'
Sep  8 00:21:11 pelle NetworkManager: <info>  Config: added 'auth_alg' value 'OPEN'
Sep  8 00:21:11 pelle NetworkManager: <info>  Config: added 'wep_key0' value '<omitted>'
Sep  8 00:21:11 pelle NetworkManager: <info>  Config: added 'wep_tx_keyidx' value '0'
Sep  8 00:21:11 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  8 00:21:11 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  8 00:21:11 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep  8 00:21:11 pelle NetworkManager: <info>  Config: set interface ap_scan to 2
Sep  8 00:21:11 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  inactive -> scanning
Sep  8 00:21:11 pelle NetworkManager: <info>  WiFi now disabled by radio killswitch
Sep  8 00:21:11 pelle NetworkManager: <info>  (wlan0): device state change: 5 -> 2 (reason 0)
Sep  8 00:21:11 pelle NetworkManager: <info>  (wlan0): deactivating device (reason: 0).
Sep  8 00:21:34 pelle kernel: [   76.280639] __ratelimit: 9 callbacks suppressed
Sep  8 00:21:34 pelle kernel: [   76.280652] python[1371]: segfault at 109 ip 00000109 sp bfda89fc error 4 in libcrypto.so.0.9.8[110000+138000]
Sep  8 00:21:34 pelle kernel: Kernel logging (proc) stopped.
Sep  8 00:22:04 pelle kernel: imklog 4.2.0, log source = /proc/kmsg started.
Sep  8 00:22:04 pelle kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep  8 00:22:04 pelle kernel: [    0.000000] Initializing cgroup subsys cpu
Sep  8 00:22:04 pelle kernel: [    0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
Sep  8 00:22:04 pelle kernel: [    0.000000] KERNEL supported cpus:
Sep  8 00:22:04 pelle kernel: [    0.000000]   Intel GenuineIntel
Sep  8 00:22:04 pelle kernel: [    0.000000]   AMD AuthenticAMD
Sep  8 00:22:04 pelle kernel: [    0.000000]   NSC Geode by NSC
Sep  8 00:22:04 pelle kernel: [    0.000000]   Cyrix CyrixInstead
Sep  8 00:22:04 pelle kernel: [    0.000000]   Centaur CentaurHauls
Sep  8 00:22:04 pelle kernel: [    0.000000]   Transmeta GenuineTMx86
Sep  8 00:22:04 pelle kernel: [    0.000000]   Transmeta TransmetaCPU
Sep  8 00:22:04 pelle kernel: [    0.000000]   UMC UMC UMC UMC
Sep  8 00:22:04 pelle kernel: [    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:22:04 pelle kernel: [    0.000000] BIOS-provided physical RAM map:
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000] DMI 2.4 present.
Sep  8 00:22:04 pelle kernel: [    0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
Sep  8 00:22:04 pelle kernel: [    0.000000] MTRR default type: uncachable
Sep  8 00:22:04 pelle kernel: [    0.000000] MTRR fixed ranges enabled:
Sep  8 00:22:04 pelle kernel: [    0.000000]   00000-9FFFF write-back
Sep  8 00:22:04 pelle kernel: [    0.000000]   A0000-BFFFF uncachable
Sep  8 00:22:04 pelle kernel: [    0.000000]   C0000-C7FFF write-protect
Sep  8 00:22:04 pelle kernel: [    0.000000]   C8000-EFFFF uncachable
Sep  8 00:22:04 pelle kernel: [    0.000000]   F0000-FFFFF write-protect
Sep  8 00:22:04 pelle kernel: [    0.000000] MTRR variable ranges enabled:
Sep  8 00:22:04 pelle kernel: [    0.000000]   0 base 0FFFE0000 mask 0FFFE0000 write-protect
Sep  8 00:22:04 pelle kernel: [    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
Sep  8 00:22:04 pelle kernel: [    0.000000]   2 base 000000000 mask 0E0000000 write-back
Sep  8 00:22:04 pelle kernel: [    0.000000]   3 base 020000000 mask 0E0000000 write-back
Sep  8 00:22:04 pelle kernel: [    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
Sep  8 00:22:04 pelle kernel: [    0.000000]   5 base 03F600000 mask 0FFE00000 uncachable
Sep  8 00:22:04 pelle kernel: [    0.000000]   6 base 03F500000 mask 0FFF00000 uncachable
Sep  8 00:22:04 pelle kernel: [    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
Sep  8 00:22:04 pelle kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep  8 00:22:04 pelle kernel: [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000] Scanning 1 areas for low memory corruption
Sep  8 00:22:04 pelle kernel: [    0.000000] modified physical RAM map:
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:22:04 pelle kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Sep  8 00:22:04 pelle kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Sep  8 00:22:04 pelle kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Sep  8 00:22:04 pelle kernel: [    0.000000]  0000000000 - 00377fe000 page 4k
Sep  8 00:22:04 pelle kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 8e2000-9c3000
Sep  8 00:22:04 pelle kernel: [    0.000000] RAMDISK: 2ef3e000 - 2f6d8324
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: RSDP 000fe020 00024 (v02 INTEL )
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: XSDT 3f4fe120 00064 (v01 INTEL  Napa     00000001      01000013)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: FACP 3f4fc000 000F4 (v04 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: DSDT 3f4f2000 05DE4 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: FACS 3f488000 00040
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: SSDT 3f4fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: HPET 3f4fb000 00038 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: APIC 3f4fa000 00068 (v02 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: MCFG 3f4f9000 0003C (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: SLIC 3f4f1000 00180 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: BOOT 3f4f0000 00028 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:22:04 pelle kernel: [    0.000000] 125MB HIGHMEM available.
Sep  8 00:22:04 pelle kernel: [    0.000000] 887MB LOWMEM available.
Sep  8 00:22:04 pelle kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Sep  8 00:22:04 pelle kernel: [    0.000000]   low ram: 0 - 377fe000
Sep  8 00:22:04 pelle kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Sep  8 00:22:04 pelle kernel: [    0.000000]   node 0 bootmap 00007000 - 0000df00
Sep  8 00:22:04 pelle kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Sep  8 00:22:04 pelle kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Sep  8 00:22:04 pelle kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Sep  8 00:22:04 pelle kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Sep  8 00:22:04 pelle kernel: [    0.000000]   #3 [0000100000 - 00008ddeb8]    TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
Sep  8 00:22:04 pelle kernel: [    0.000000]   #4 [002ef3e000 - 002f6d8324]          RAMDISK ==> [002ef3e000 - 002f6d8324]
Sep  8 00:22:04 pelle kernel: [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Sep  8 00:22:04 pelle kernel: [    0.000000]   #6 [00008de000 - 00008e1244]              BRK ==> [00008de000 - 00008e1244]
Sep  8 00:22:04 pelle kernel: [    0.000000]   #7 [00008e2000 - 00009bd000]          PGTABLE ==> [00008e2000 - 00009bd000]
Sep  8 00:22:04 pelle kernel: [    0.000000]   #8 [0000007000 - 000000e000]          BOOTMAP ==> [0000007000 - 000000e000]
Sep  8 00:22:04 pelle kernel: [    0.000000] Zone PFN ranges:
Sep  8 00:22:04 pelle kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Sep  8 00:22:04 pelle kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Sep  8 00:22:04 pelle kernel: [    0.000000]   HighMem  0x000377fe -> 0x0003f500
Sep  8 00:22:04 pelle kernel: [    0.000000] Movable zone start PFN for each node
Sep  8 00:22:04 pelle kernel: [    0.000000] early_node_map[6] active PFN ranges
Sep  8 00:22:04 pelle kernel: [    0.000000]     0: 0x00000000 -> 0x00000002
Sep  8 00:22:04 pelle kernel: [    0.000000]     0: 0x00000006 -> 0x0000009f
Sep  8 00:22:04 pelle kernel: [    0.000000]     0: 0x00000100 -> 0x0003f376
Sep  8 00:22:04 pelle kernel: [    0.000000]     0: 0x0003f3bf -> 0x0003f46d
Sep  8 00:22:04 pelle kernel: [    0.000000]     0: 0x0003f4bf -> 0x0003f4f0
Sep  8 00:22:04 pelle kernel: [    0.000000]     0: 0x0003f4ff -> 0x0003f500
Sep  8 00:22:04 pelle kernel: [    0.000000] On node 0 totalpages: 259057
Sep  8 00:22:04 pelle kernel: [    0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000
Sep  8 00:22:04 pelle kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Sep  8 00:22:04 pelle kernel: [    0.000000]   DMA zone: 0 pages reserved
Sep  8 00:22:04 pelle kernel: [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
Sep  8 00:22:04 pelle kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Sep  8 00:22:04 pelle kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Sep  8 00:22:04 pelle kernel: [    0.000000]   HighMem zone: 251 pages used for memmap
Sep  8 00:22:04 pelle kernel: [    0.000000]   HighMem zone: 31581 pages, LIFO batch:7
Sep  8 00:22:04 pelle kernel: [    0.000000] Using APIC driver default
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Sep  8 00:22:04 pelle kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: IRQ2 used by override.
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep  8 00:22:04 pelle kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep  8 00:22:04 pelle kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep  8 00:22:04 pelle kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep  8 00:22:04 pelle kernel: [    0.000000] nr_irqs_gsi: 24
Sep  8 00:22:04 pelle kernel: [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Sep  8 00:22:04 pelle kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep  8 00:22:04 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Sep  8 00:22:04 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Sep  8 00:22:04 pelle kernel: [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Sep  8 00:22:04 pelle kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep  8 00:22:04 pelle kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Sep  8 00:22:04 pelle kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536
Sep  8 00:22:04 pelle kernel: [    0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
Sep  8 00:22:04 pelle kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 
Sep  8 00:22:04 pelle kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257030
Sep  8 00:22:04 pelle kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=05e65f51-4919-405f-ae5e-374a2ae344e8 ro quiet splash
Sep  8 00:22:04 pelle kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Sep  8 00:22:04 pelle kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep  8 00:22:04 pelle kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep  8 00:22:04 pelle kernel: [    0.000000] Enabling fast FPU save and restore... done.
Sep  8 00:22:04 pelle kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Sep  8 00:22:04 pelle kernel: [    0.000000] Initializing CPU#0
Sep  8 00:22:04 pelle kernel: [    0.000000] allocated 5186560 bytes of page_cgroup
Sep  8 00:22:04 pelle kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep  8 00:22:04 pelle kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
Sep  8 00:22:04 pelle kernel: [    0.000000] Memory: 1004836k/1037312k available (4679k kernel code, 30884k reserved, 2124k data, 660k init, 127328k highmem)
Sep  8 00:22:04 pelle kernel: [    0.000000] virtual kernel memory layout:
Sep  8 00:22:04 pelle kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Sep  8 00:22:04 pelle kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Sep  8 00:22:04 pelle kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Sep  8 00:22:04 pelle kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Sep  8 00:22:04 pelle kernel: [    0.000000]       .init : 0xc07a5000 - 0xc084a000   ( 660 kB)
Sep  8 00:22:04 pelle kernel: [    0.000000]       .data : 0xc0591e33 - 0xc07a4e88   (2124 kB)
Sep  8 00:22:04 pelle kernel: [    0.000000]       .text : 0xc0100000 - 0xc0591e33   (4679 kB)
Sep  8 00:22:04 pelle kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Sep  8 00:22:04 pelle kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep  8 00:22:04 pelle kernel: [    0.000000] Hierarchical RCU implementation.
Sep  8 00:22:04 pelle kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Sep  8 00:22:04 pelle kernel: [    0.000000] Console: colour VGA+ 80x25
Sep  8 00:22:04 pelle kernel: [    0.000000] console [tty0] enabled
Sep  8 00:22:04 pelle kernel: [    0.000000] hpet clockevent registered
Sep  8 00:22:04 pelle kernel: [    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Sep  8 00:22:04 pelle kernel: [    0.000000] Fast TSC calibration using PIT
Sep  8 00:22:04 pelle kernel: [    0.000000] Detected 1595.818 MHz processor.
Sep  8 00:22:04 pelle kernel: [    0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.63 BogoMIPS (lpj=6383272)
Sep  8 00:22:04 pelle kernel: [    0.004048] Security Framework initialized
Sep  8 00:22:04 pelle kernel: [    0.004094] AppArmor: AppArmor initialized
Sep  8 00:22:04 pelle kernel: [    0.004110] Mount-cache hash table entries: 512
Sep  8 00:22:04 pelle kernel: [    0.004358] Initializing cgroup subsys ns
Sep  8 00:22:04 pelle kernel: [    0.004369] Initializing cgroup subsys cpuacct
Sep  8 00:22:04 pelle kernel: [    0.004380] Initializing cgroup subsys memory
Sep  8 00:22:04 pelle kernel: [    0.004394] Initializing cgroup subsys devices
Sep  8 00:22:04 pelle kernel: [    0.004400] Initializing cgroup subsys freezer
Sep  8 00:22:04 pelle kernel: [    0.004406] Initializing cgroup subsys net_cls
Sep  8 00:22:04 pelle kernel: [    0.004439] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:22:04 pelle kernel: [    0.004448] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:22:04 pelle kernel: [    0.004455] CPU: L2 cache: 512K
Sep  8 00:22:04 pelle kernel: [    0.004461] CPU: Physical Processor ID: 0
Sep  8 00:22:04 pelle kernel: [    0.004465] CPU: Processor Core ID: 0
Sep  8 00:22:04 pelle kernel: [    0.004473] mce: CPU supports 5 MCE banks
Sep  8 00:22:04 pelle kernel: [    0.004490] CPU0: Thermal monitoring enabled (TM1)
Sep  8 00:22:04 pelle kernel: [    0.004500] using mwait in idle threads.
Sep  8 00:22:04 pelle kernel: [    0.004512] Performance Events: Atom events, Intel PMU driver.
Sep  8 00:22:04 pelle kernel: [    0.004530] ... version:                3
Sep  8 00:22:04 pelle kernel: [    0.004535] ... bit width:              40
Sep  8 00:22:04 pelle kernel: [    0.004539] ... generic registers:      2
Sep  8 00:22:04 pelle kernel: [    0.004544] ... value mask:             000000ffffffffff
Sep  8 00:22:04 pelle kernel: [    0.004550] ... max period:             000000007fffffff
Sep  8 00:22:04 pelle kernel: [    0.004555] ... fixed-purpose events:   3
Sep  8 00:22:04 pelle kernel: [    0.004559] ... event mask:             0000000700000003
Sep  8 00:22:04 pelle kernel: [    0.004569] Checking 'hlt' instruction... OK.
Sep  8 00:22:04 pelle kernel: [    0.020009] Disabling 4MB page tables to avoid TLB bug
Sep  8 00:22:04 pelle kernel: [    0.024451] ACPI: Core revision 20090903
Sep  8 00:22:04 pelle kernel: [    0.040018] ftrace: converting mcount calls to 0f 1f 44 00 00
Sep  8 00:22:04 pelle kernel: [    0.040030] ftrace: allocating 21780 entries in 43 pages
Sep  8 00:22:04 pelle kernel: [    0.044111] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep  8 00:22:04 pelle kernel: [    0.044520] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep  8 00:22:04 pelle kernel: [    0.086300] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:22:04 pelle kernel: [    0.088001] Booting processor 1 APIC 0x1 ip 0x6000
Sep  8 00:22:04 pelle kernel: [    0.008000] Initializing CPU#1
Sep  8 00:22:04 pelle kernel: [    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:22:04 pelle kernel: [    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:22:04 pelle kernel: [    0.008000] CPU: L2 cache: 512K
Sep  8 00:22:04 pelle kernel: [    0.008000] CPU: Physical Processor ID: 0
Sep  8 00:22:04 pelle kernel: [    0.008000] CPU: Processor Core ID: 0
Sep  8 00:22:04 pelle kernel: [    0.008000] CPU1: Thermal monitoring enabled (TM1)
Sep  8 00:22:04 pelle kernel: [    0.172141] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:22:04 pelle kernel: [    0.172171] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep  8 00:22:04 pelle kernel: [    0.176035] Brought up 2 CPUs
Sep  8 00:22:04 pelle kernel: [    0.176043] Total of 2 processors activated (6383.58 BogoMIPS).
Sep  8 00:22:04 pelle kernel: [    0.176293] CPU0 attaching sched-domain:
Sep  8 00:22:04 pelle kernel: [    0.176302]  domain 0: span 0-1 level SIBLING
Sep  8 00:22:04 pelle kernel: [    0.176308]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:22:04 pelle kernel: [    0.176321]   domain 1: span 0-1 level MC
Sep  8 00:22:04 pelle kernel: [    0.176326]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:22:04 pelle kernel: [    0.176339] CPU1 attaching sched-domain:
Sep  8 00:22:04 pelle kernel: [    0.176344]  domain 0: span 0-1 level SIBLING
Sep  8 00:22:04 pelle kernel: [    0.176349]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:22:04 pelle kernel: [    0.176360]   domain 1: span 0-1 level MC
Sep  8 00:22:04 pelle kernel: [    0.176366]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:22:04 pelle kernel: [    0.176597] devtmpfs: initialized
Sep  8 00:22:04 pelle kernel: [    0.176597] regulator: core version 0.5
Sep  8 00:22:04 pelle kernel: [    0.176597] Time: 21:21:53  Date: 09/07/10
Sep  8 00:22:04 pelle kernel: [    0.176597] NET: Registered protocol family 16
Sep  8 00:22:04 pelle kernel: [    0.176597] Trying to unpack rootfs image as initramfs...
Sep  8 00:22:04 pelle kernel: [    0.176597] EISA bus registered
Sep  8 00:22:04 pelle kernel: [    0.176607] ACPI: bus type pci registered
Sep  8 00:22:04 pelle kernel: [    0.176779] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Sep  8 00:22:04 pelle kernel: [    0.176788] PCI: MCFG area at e0000000 reserved in E820
Sep  8 00:22:04 pelle kernel: [    0.176794] PCI: Using MMCONFIG for extended config space
Sep  8 00:22:04 pelle kernel: [    0.176801] PCI: Using configuration type 1 for base access
Sep  8 00:22:04 pelle kernel: [    0.181851] bio: create slab <bio-0> at 0
Sep  8 00:22:04 pelle kernel: [    0.184415] ACPI: EC: Look up EC in DSDT
Sep  8 00:22:04 pelle kernel: [    0.188691] ACPI: Executed 1 blocks of module-level executable AML code
Sep  8 00:22:04 pelle kernel: [    0.193085] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:22:04 pelle kernel: [    0.193360] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:22:04 pelle kernel: [    0.200447] ACPI: Interpreter enabled
Sep  8 00:22:04 pelle kernel: [    0.200467] ACPI: (supports S0 S3 S4 S5)
Sep  8 00:22:04 pelle kernel: [    0.200542] ACPI: Using IOAPIC for interrupt routing
Sep  8 00:22:04 pelle kernel: [    0.214272] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Sep  8 00:22:04 pelle kernel: [    0.214954] ACPI: No dock devices found.
Sep  8 00:22:04 pelle kernel: [    0.216740] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.216761] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.216784] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
Sep  8 00:22:04 pelle kernel: [    0.216852] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep  8 00:22:04 pelle kernel: [    0.217074] pci 0000:00:02.0: reg 10 32bit mmio: [0x58480000-0x584fffff]
Sep  8 00:22:04 pelle kernel: [    0.217088] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
Sep  8 00:22:04 pelle kernel: [    0.217100] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
Sep  8 00:22:04 pelle kernel: [    0.217113] pci 0000:00:02.0: reg 1c 32bit mmio: [0x58500000-0x5853ffff]
Sep  8 00:22:04 pelle kernel: [    0.217182] pci 0000:00:02.1: reg 10 32bit mmio: [0x58400000-0x5847ffff]
Sep  8 00:22:04 pelle kernel: [    0.217347] pci 0000:00:1b.0: reg 10 64bit mmio: [0x58540000-0x58543fff]
Sep  8 00:22:04 pelle kernel: [    0.217430] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep  8 00:22:04 pelle kernel: [    0.217442] pci 0000:00:1b.0: PME# disabled
Sep  8 00:22:04 pelle kernel: [    0.217569] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep  8 00:22:04 pelle kernel: [    0.217580] pci 0000:00:1c.0: PME# disabled
Sep  8 00:22:04 pelle kernel: [    0.217717] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep  8 00:22:04 pelle kernel: [    0.217730] pci 0000:00:1c.1: PME# disabled
Sep  8 00:22:04 pelle kernel: [    0.217863] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Sep  8 00:22:04 pelle kernel: [    0.217874] pci 0000:00:1c.2: PME# disabled
Sep  8 00:22:04 pelle kernel: [    0.218006] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Sep  8 00:22:04 pelle kernel: [    0.218016] pci 0000:00:1c.3: PME# disabled
Sep  8 00:22:04 pelle kernel: [    0.218110] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
Sep  8 00:22:04 pelle kernel: [    0.218203] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
Sep  8 00:22:04 pelle kernel: [    0.218294] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
Sep  8 00:22:04 pelle kernel: [    0.218386] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
Sep  8 00:22:04 pelle kernel: [    0.218496] pci 0000:00:1d.7: reg 10 32bit mmio: [0x58544400-0x585447ff]
Sep  8 00:22:04 pelle kernel: [    0.218590] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Sep  8 00:22:04 pelle kernel: [    0.218602] pci 0000:00:1d.7: PME# disabled
Sep  8 00:22:04 pelle kernel: [    0.218839] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Sep  8 00:22:04 pelle kernel: [    0.218850] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Sep  8 00:22:04 pelle kernel: [    0.218869] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
Sep  8 00:22:04 pelle kernel: [    0.218961] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
Sep  8 00:22:04 pelle kernel: [    0.218976] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
Sep  8 00:22:04 pelle kernel: [    0.218991] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
Sep  8 00:22:04 pelle kernel: [    0.219006] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
Sep  8 00:22:04 pelle kernel: [    0.219021] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
Sep  8 00:22:04 pelle kernel: [    0.219072] pci 0000:00:1f.2: PME# supported from D3hot
Sep  8 00:22:04 pelle kernel: [    0.219082] pci 0000:00:1f.2: PME# disabled
Sep  8 00:22:04 pelle kernel: [    0.219166] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
Sep  8 00:22:04 pelle kernel: [    0.219300] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
Sep  8 00:22:04 pelle kernel: [    0.219316] pci 0000:00:1c.0: bridge 32bit mmio: [0x57300000-0x583fffff]
Sep  8 00:22:04 pelle kernel: [    0.219334] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
Sep  8 00:22:04 pelle kernel: [    0.219431] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
Sep  8 00:22:04 pelle kernel: [    0.219470] pci 0000:02:00.0: reg 18 64bit mmio pref: [0x51010000-0x51010fff]
Sep  8 00:22:04 pelle kernel: [    0.219498] pci 0000:02:00.0: reg 20 64bit mmio pref: [0x51000000-0x5100ffff]
Sep  8 00:22:04 pelle kernel: [    0.219517] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
Sep  8 00:22:04 pelle kernel: [    0.219588] pci 0000:02:00.0: supports D1 D2
Sep  8 00:22:04 pelle kernel: [    0.219595] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep  8 00:22:04 pelle kernel: [    0.219607] pci 0000:02:00.0: PME# disabled
Sep  8 00:22:04 pelle kernel: [    0.219721] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
Sep  8 00:22:04 pelle kernel: [    0.219732] pci 0000:00:1c.1: bridge 32bit mmio: [0x56300000-0x572fffff]
Sep  8 00:22:04 pelle kernel: [    0.219748] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
Sep  8 00:22:04 pelle kernel: [    0.219926] pci 0000:03:00.0: reg 10 64bit mmio: [0x55200000-0x5520ffff]
Sep  8 00:22:04 pelle kernel: [    0.220299] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
Sep  8 00:22:04 pelle kernel: [    0.220312] pci 0000:00:1c.2: bridge 32bit mmio: [0x55200000-0x562fffff]
Sep  8 00:22:04 pelle kernel: [    0.220328] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52100000-0x530fffff]
Sep  8 00:22:04 pelle kernel: [    0.220415] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
Sep  8 00:22:04 pelle kernel: [    0.220427] pci 0000:00:1c.3: bridge 32bit mmio: [0x54100000-0x551fffff]
Sep  8 00:22:04 pelle kernel: [    0.220442] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53100000-0x540fffff]
Sep  8 00:22:04 pelle kernel: [    0.220531] pci 0000:00:1e.0: transparent bridge
Sep  8 00:22:04 pelle kernel: [    0.220591] pci_bus 0000:00: on NUMA node 0
Sep  8 00:22:04 pelle kernel: [    0.220612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep  8 00:22:04 pelle kernel: [    0.221116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
Sep  8 00:22:04 pelle kernel: [    0.221519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
Sep  8 00:22:04 pelle kernel: [    0.221815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
Sep  8 00:22:04 pelle kernel: [    0.222064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
Sep  8 00:22:04 pelle kernel: [    0.222293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
Sep  8 00:22:04 pelle kernel: [    0.222872] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.222893] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.235488] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:22:04 pelle kernel: [    0.235815] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:22:04 pelle kernel: [    0.236157] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:22:04 pelle kernel: [    0.236480] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:22:04 pelle kernel: [    0.236783] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:22:04 pelle kernel: [    0.237090] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:22:04 pelle kernel: [    0.237408] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:22:04 pelle kernel: [    0.237713] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:22:04 pelle kernel: [    0.238082] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep  8 00:22:04 pelle kernel: [    0.238116] vgaarb: loaded
Sep  8 00:22:04 pelle kernel: [    0.238475] SCSI subsystem initialized
Sep  8 00:22:04 pelle kernel: [    0.238717] libata version 3.00 loaded.
Sep  8 00:22:04 pelle kernel: [    0.238984] usbcore: registered new interface driver usbfs
Sep  8 00:22:04 pelle kernel: [    0.239038] usbcore: registered new interface driver hub
Sep  8 00:22:04 pelle kernel: [    0.239142] usbcore: registered new device driver usb
Sep  8 00:22:04 pelle kernel: [    0.239814] ACPI: WMI: Mapper loaded
Sep  8 00:22:04 pelle kernel: [    0.239823] PCI: Using ACPI for IRQ routing
Sep  8 00:22:04 pelle kernel: [    0.240318] NetLabel: Initializing
Sep  8 00:22:04 pelle kernel: [    0.240325] NetLabel:  domain hash size = 128
Sep  8 00:22:04 pelle kernel: [    0.240330] NetLabel:  protocols = UNLABELED CIPSOv4
Sep  8 00:22:04 pelle kernel: [    0.240363] NetLabel:  unlabeled traffic allowed by default
Sep  8 00:22:04 pelle kernel: [    0.240474] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep  8 00:22:04 pelle kernel: [    0.240491] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Sep  8 00:22:04 pelle kernel: [    0.244575] Switching to clocksource tsc
Sep  8 00:22:04 pelle kernel: [    0.249026] AppArmor: AppArmor Filesystem Enabled
Sep  8 00:22:04 pelle kernel: [    0.249068] pnp: PnP ACPI init
Sep  8 00:22:04 pelle kernel: [    0.249110] ACPI: bus type pnp registered
Sep  8 00:22:04 pelle kernel: [    0.251779] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
Sep  8 00:22:04 pelle kernel: [    0.253490] pnp: PnP ACPI: found 9 devices
Sep  8 00:22:04 pelle kernel: [    0.253497] ACPI: ACPI bus type pnp unregistered
Sep  8 00:22:04 pelle kernel: [    0.253507] PnPBIOS: Disabled by ACPI PNP
Sep  8 00:22:04 pelle kernel: [    0.253541] system 00:01: ioport range 0x200-0x20f has been reserved
Sep  8 00:22:04 pelle kernel: [    0.253553] system 00:01: ioport range 0x600-0x60f has been reserved
Sep  8 00:22:04 pelle kernel: [    0.253562] system 00:01: ioport range 0x610-0x610 has been reserved
Sep  8 00:22:04 pelle kernel: [    0.253573] system 00:01: ioport range 0x800-0x80f has been reserved
Sep  8 00:22:04 pelle kernel: [    0.253583] system 00:01: ioport range 0x400-0x47f has been reserved
Sep  8 00:22:04 pelle kernel: [    0.253592] system 00:01: ioport range 0x500-0x53f has been reserved
Sep  8 00:22:04 pelle kernel: [    0.253605] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Sep  8 00:22:04 pelle kernel: [    0.253616] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Sep  8 00:22:04 pelle kernel: [    0.253626] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Sep  8 00:22:04 pelle kernel: [    0.253636] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Sep  8 00:22:04 pelle kernel: [    0.253646] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Sep  8 00:22:04 pelle kernel: [    0.253657] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Sep  8 00:22:04 pelle kernel: [    0.253668] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Sep  8 00:22:04 pelle kernel: [    0.288851] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
Sep  8 00:22:04 pelle kernel: [    0.288939] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Sep  8 00:22:04 pelle kernel: [    0.288949] pci 0000:00:1c.0:   IO window: 0x5000-0x5fff
Sep  8 00:22:04 pelle kernel: [    0.288962] pci 0000:00:1c.0:   MEM window: 0x57300000-0x583fffff
Sep  8 00:22:04 pelle kernel: [    0.288974] pci 0000:00:1c.0:   PREFETCH window: 0x00000050000000-0x00000050ffffff
Sep  8 00:22:04 pelle kernel: [    0.288995] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Sep  8 00:22:04 pelle kernel: [    0.289004] pci 0000:00:1c.1:   IO window: 0x3000-0x4fff
Sep  8 00:22:04 pelle kernel: [    0.289017] pci 0000:00:1c.1:   MEM window: 0x56300000-0x572fffff
Sep  8 00:22:04 pelle kernel: [    0.289028] pci 0000:00:1c.1:   PREFETCH window: 0x00000051000000-0x000000520fffff
Sep  8 00:22:04 pelle kernel: [    0.289044] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
Sep  8 00:22:04 pelle kernel: [    0.289053] pci 0000:00:1c.2:   IO window: 0x2000-0x2fff
Sep  8 00:22:04 pelle kernel: [    0.289066] pci 0000:00:1c.2:   MEM window: 0x55200000-0x562fffff
Sep  8 00:22:04 pelle kernel: [    0.289077] pci 0000:00:1c.2:   PREFETCH window: 0x00000052100000-0x000000530fffff
Sep  8 00:22:04 pelle kernel: [    0.289092] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
Sep  8 00:22:04 pelle kernel: [    0.289101] pci 0000:00:1c.3:   IO window: 0x1000-0x1fff
Sep  8 00:22:04 pelle kernel: [    0.289115] pci 0000:00:1c.3:   MEM window: 0x54100000-0x551fffff
Sep  8 00:22:04 pelle kernel: [    0.289126] pci 0000:00:1c.3:   PREFETCH window: 0x00000053100000-0x000000540fffff
Sep  8 00:22:04 pelle kernel: [    0.289141] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
Sep  8 00:22:04 pelle kernel: [    0.289148] pci 0000:00:1e.0:   IO window: disabled
Sep  8 00:22:04 pelle kernel: [    0.289159] pci 0000:00:1e.0:   MEM window: disabled
Sep  8 00:22:04 pelle kernel: [    0.289168] pci 0000:00:1e.0:   PREFETCH window: disabled
Sep  8 00:22:04 pelle kernel: [    0.289208]   alloc irq_desc for 16 on node -1
Sep  8 00:22:04 pelle kernel: [    0.289215]   alloc kstat_irqs on node -1
Sep  8 00:22:04 pelle kernel: [    0.289233] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:22:04 pelle kernel: [    0.289246] pci 0000:00:1c.0: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.289268]   alloc irq_desc for 17 on node -1
Sep  8 00:22:04 pelle kernel: [    0.289274]   alloc kstat_irqs on node -1
Sep  8 00:22:04 pelle kernel: [    0.289286] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:22:04 pelle kernel: [    0.289297] pci 0000:00:1c.1: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.289317]   alloc irq_desc for 18 on node -1
Sep  8 00:22:04 pelle kernel: [    0.289323]   alloc kstat_irqs on node -1
Sep  8 00:22:04 pelle kernel: [    0.289334] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:22:04 pelle kernel: [    0.289345] pci 0000:00:1c.2: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.289366]   alloc irq_desc for 19 on node -1
Sep  8 00:22:04 pelle kernel: [    0.289372]   alloc kstat_irqs on node -1
Sep  8 00:22:04 pelle kernel: [    0.289383] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:22:04 pelle kernel: [    0.289394] pci 0000:00:1c.3: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.289411] pci 0000:00:1e.0: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.289422] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Sep  8 00:22:04 pelle kernel: [    0.289431] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Sep  8 00:22:04 pelle kernel: [    0.289439] pci_bus 0000:01: resource 0 io:  [0x5000-0x5fff]
Sep  8 00:22:04 pelle kernel: [    0.289448] pci_bus 0000:01: resource 1 mem: [0x57300000-0x583fffff]
Sep  8 00:22:04 pelle kernel: [    0.289457] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
Sep  8 00:22:04 pelle kernel: [    0.289465] pci_bus 0000:02: resource 0 io:  [0x3000-0x4fff]
Sep  8 00:22:04 pelle kernel: [    0.289474] pci_bus 0000:02: resource 1 mem: [0x56300000-0x572fffff]
Sep  8 00:22:04 pelle kernel: [    0.289482] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x520fffff]
Sep  8 00:22:04 pelle kernel: [    0.289491] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
Sep  8 00:22:04 pelle kernel: [    0.289499] pci_bus 0000:03: resource 1 mem: [0x55200000-0x562fffff]
Sep  8 00:22:04 pelle kernel: [    0.289508] pci_bus 0000:03: resource 2 pref mem [0x52100000-0x530fffff]
Sep  8 00:22:04 pelle kernel: [    0.289517] pci_bus 0000:04: resource 0 io:  [0x1000-0x1fff]
Sep  8 00:22:04 pelle kernel: [    0.289526] pci_bus 0000:04: resource 1 mem: [0x54100000-0x551fffff]
Sep  8 00:22:04 pelle kernel: [    0.289535] pci_bus 0000:04: resource 2 pref mem [0x53100000-0x540fffff]
Sep  8 00:22:04 pelle kernel: [    0.289544] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
Sep  8 00:22:04 pelle kernel: [    0.289551] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
Sep  8 00:22:04 pelle kernel: [    0.289659] NET: Registered protocol family 2
Sep  8 00:22:04 pelle kernel: [    0.289941] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep  8 00:22:04 pelle kernel: [    0.290933] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep  8 00:22:04 pelle kernel: [    0.292149] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep  8 00:22:04 pelle kernel: [    0.292713] TCP: Hash tables configured (established 131072 bind 65536)
Sep  8 00:22:04 pelle kernel: [    0.292722] TCP reno registered
Sep  8 00:22:04 pelle kernel: [    0.293039] NET: Registered protocol family 1
Sep  8 00:22:04 pelle kernel: [    0.293102] pci 0000:00:02.0: Boot video device
Sep  8 00:22:04 pelle kernel: [    0.293430] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Sep  8 00:22:04 pelle kernel: [    0.293438] Simple Boot Flag at 0x44 set to 0x1
Sep  8 00:22:04 pelle kernel: [    0.293963] cpufreq-nforce2: No nForce2 chipset.
Sep  8 00:22:04 pelle kernel: [    0.294047] Scanning for low memory corruption every 60 seconds
Sep  8 00:22:04 pelle kernel: [    0.294384] audit: initializing netlink socket (disabled)
Sep  8 00:22:04 pelle kernel: [    0.294439] type=2000 audit(1283894512.294:1): initialized
Sep  8 00:22:04 pelle kernel: [    0.316073] highmem bounce pool size: 64 pages
Sep  8 00:22:04 pelle kernel: [    0.316091] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Sep  8 00:22:04 pelle kernel: [    0.321462] VFS: Disk quotas dquot_6.5.2
Sep  8 00:22:04 pelle kernel: [    0.321662] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep  8 00:22:04 pelle kernel: [    0.323772] fuse init (API version 7.13)
Sep  8 00:22:04 pelle kernel: [    0.324093] msgmni has been set to 1714
Sep  8 00:22:04 pelle kernel: [    0.324803] alg: No test for stdrng (krng)
Sep  8 00:22:04 pelle kernel: [    0.325013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep  8 00:22:04 pelle kernel: [    0.325023] io scheduler noop registered
Sep  8 00:22:04 pelle kernel: [    0.325029] io scheduler anticipatory registered
Sep  8 00:22:04 pelle kernel: [    0.325035] io scheduler deadline registered
Sep  8 00:22:04 pelle kernel: [    0.325175] io scheduler cfq registered (default)
Sep  8 00:22:04 pelle kernel: [    0.325531]   alloc irq_desc for 24 on node -1
Sep  8 00:22:04 pelle kernel: [    0.325540]   alloc kstat_irqs on node -1
Sep  8 00:22:04 pelle kernel: [    0.325562] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
Sep  8 00:22:04 pelle kernel: [    0.325582] pcieport 0000:00:1c.0: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.325860]   alloc irq_desc for 25 on node -1
Sep  8 00:22:04 pelle kernel: [    0.325867]   alloc kstat_irqs on node -1
Sep  8 00:22:04 pelle kernel: [    0.325885] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
Sep  8 00:22:04 pelle kernel: [    0.325903] pcieport 0000:00:1c.1: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.326192]   alloc irq_desc for 26 on node -1
Sep  8 00:22:04 pelle kernel: [    0.326200]   alloc kstat_irqs on node -1
Sep  8 00:22:04 pelle kernel: [    0.326219] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
Sep  8 00:22:04 pelle kernel: [    0.326240] pcieport 0000:00:1c.2: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.326548]   alloc irq_desc for 27 on node -1
Sep  8 00:22:04 pelle kernel: [    0.326555]   alloc kstat_irqs on node -1
Sep  8 00:22:04 pelle kernel: [    0.326574] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
Sep  8 00:22:04 pelle kernel: [    0.326592] pcieport 0000:00:1c.3: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.326844] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  8 00:22:04 pelle kernel: [    0.327156] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.327180] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.327538] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.327558] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.327880] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.327899] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.328234] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.328253] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.328637] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.328656] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.328992] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.329014] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.329356] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.329375] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.329694] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.329713] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:22:04 pelle kernel: [    0.329834] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep  8 00:22:04 pelle kernel: [    0.330488] ACPI: AC Adapter [ACAD] (on-line)
Sep  8 00:22:04 pelle kernel: [    0.330771] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Sep  8 00:22:04 pelle kernel: [    0.330782] ACPI: Power Button [PWRB]
Sep  8 00:22:04 pelle kernel: [    0.330921] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Sep  8 00:22:04 pelle kernel: [    0.331319] ACPI: Lid Switch [LID0]
Sep  8 00:22:04 pelle kernel: [    0.331491] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Sep  8 00:22:04 pelle kernel: [    0.331501] ACPI: Sleep Button [SLPB]
Sep  8 00:22:04 pelle kernel: [    0.331679] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Sep  8 00:22:04 pelle kernel: [    0.331688] ACPI: Power Button [PWRF]
Sep  8 00:22:04 pelle kernel: [    0.333598] ACPI: SSDT 3f380c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
Sep  8 00:22:04 pelle kernel: [    0.334672] ACPI: SSDT 3f37fe10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
Sep  8 00:22:04 pelle kernel: [    0.335604] Marking TSC unstable due to TSC halts in idle
Sep  8 00:22:04 pelle kernel: [    0.335864] processor LNXCPU:00: registered as cooling_device0
Sep  8 00:22:04 pelle kernel: [    0.336912] ACPI: SSDT 3f380f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
Sep  8 00:22:04 pelle kernel: [    0.337875] ACPI: SSDT 3f37ef10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
Sep  8 00:22:04 pelle kernel: [    0.338610] Switching to clocksource hpet
Sep  8 00:22:04 pelle kernel: [    0.339174] processor LNXCPU:01: registered as cooling_device1
Sep  8 00:22:04 pelle kernel: [    0.348248] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Sep  8 00:22:04 pelle kernel: [    0.352505] brd: module loaded
Sep  8 00:22:04 pelle kernel: [    0.353230] ACPI: Battery Slot [BAT1] (battery absent)
Sep  8 00:22:04 pelle kernel: [    0.353265] isapnp: Scanning for PnP cards...
Sep  8 00:22:04 pelle kernel: [    0.403726] loop: module loaded
Sep  8 00:22:04 pelle kernel: [    0.404026] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Sep  8 00:22:04 pelle kernel: [    0.404308] ata_piix 0000:00:1f.2: version 2.13
Sep  8 00:22:04 pelle kernel: [    0.404346] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:22:04 pelle kernel: [    0.404361] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Sep  8 00:22:04 pelle kernel: [    0.404451] ata_piix 0000:00:1f.2: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.448213] scsi0 : ata_piix
Sep  8 00:22:04 pelle kernel: [    0.492396] scsi1 : ata_piix
Sep  8 00:22:04 pelle kernel: [    0.495037] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
Sep  8 00:22:04 pelle kernel: [    0.495046] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
Sep  8 00:22:04 pelle kernel: [    0.496208] Fixed MDIO Bus: probed
Sep  8 00:22:04 pelle kernel: [    0.496322] PPP generic driver version 2.4.2
Sep  8 00:22:04 pelle kernel: [    0.496468] tun: Universal TUN/TAP device driver, 1.6
Sep  8 00:22:04 pelle kernel: [    0.496474] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep  8 00:22:04 pelle kernel: [    0.496724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep  8 00:22:04 pelle kernel: [    0.496779] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:22:04 pelle kernel: [    0.496815] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.496824] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep  8 00:22:04 pelle kernel: [    0.496921] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep  8 00:22:04 pelle kernel: [    0.496965] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Sep  8 00:22:04 pelle kernel: [    0.496986] ehci_hcd 0000:00:1d.7: debug port 1
Sep  8 00:22:04 pelle kernel: [    0.500881] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Sep  8 00:22:04 pelle kernel: [    0.500923] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
Sep  8 00:22:04 pelle kernel: [    0.516169] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Sep  8 00:22:04 pelle kernel: [    0.516502] usb usb1: configuration #1 chosen from 1 choice
Sep  8 00:22:04 pelle kernel: [    0.516592] hub 1-0:1.0: USB hub found
Sep  8 00:22:04 pelle kernel: [    0.516616] hub 1-0:1.0: 8 ports detected
Sep  8 00:22:04 pelle kernel: [    0.516807] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep  8 00:22:04 pelle kernel: [    0.516858] uhci_hcd: USB Universal Host Controller Interface driver
Sep  8 00:22:04 pelle kernel: [    0.516947] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:22:04 pelle kernel: [    0.516968] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.516977] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep  8 00:22:04 pelle kernel: [    0.517094] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep  8 00:22:04 pelle kernel: [    0.517143] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
Sep  8 00:22:04 pelle kernel: [    0.517399] usb usb2: configuration #1 chosen from 1 choice
Sep  8 00:22:04 pelle kernel: [    0.517491] hub 2-0:1.0: USB hub found
Sep  8 00:22:04 pelle kernel: [    0.517511] hub 2-0:1.0: 2 ports detected
Sep  8 00:22:04 pelle kernel: [    0.517627] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:22:04 pelle kernel: [    0.517642] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.517651] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep  8 00:22:04 pelle kernel: [    0.517749] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep  8 00:22:04 pelle kernel: [    0.517811] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
Sep  8 00:22:04 pelle kernel: [    0.518068] usb usb3: configuration #1 chosen from 1 choice
Sep  8 00:22:04 pelle kernel: [    0.518166] hub 3-0:1.0: USB hub found
Sep  8 00:22:04 pelle kernel: [    0.518185] hub 3-0:1.0: 2 ports detected
Sep  8 00:22:04 pelle kernel: [    0.518302] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:22:04 pelle kernel: [    0.518318] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.518326] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep  8 00:22:04 pelle kernel: [    0.518433] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep  8 00:22:04 pelle kernel: [    0.518490] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
Sep  8 00:22:04 pelle kernel: [    0.518753] usb usb4: configuration #1 chosen from 1 choice
Sep  8 00:22:04 pelle kernel: [    0.518834] hub 4-0:1.0: USB hub found
Sep  8 00:22:04 pelle kernel: [    0.518854] hub 4-0:1.0: 2 ports detected
Sep  8 00:22:04 pelle kernel: [    0.518966] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:22:04 pelle kernel: [    0.518981] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    0.518990] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep  8 00:22:04 pelle kernel: [    0.519082] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep  8 00:22:04 pelle kernel: [    0.519138] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
Sep  8 00:22:04 pelle kernel: [    0.519388] usb usb5: configuration #1 chosen from 1 choice
Sep  8 00:22:04 pelle kernel: [    0.519468] hub 5-0:1.0: USB hub found
Sep  8 00:22:04 pelle kernel: [    0.519486] hub 5-0:1.0: 2 ports detected
Sep  8 00:22:04 pelle kernel: [    0.519726] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Sep  8 00:22:04 pelle kernel: [    0.523554] i8042.c: Warning: Keylock active.
Sep  8 00:22:04 pelle kernel: [    0.543637] i8042.c: Detected active multiplexing controller, rev 1.1.
Sep  8 00:22:04 pelle kernel: [    0.556613] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  8 00:22:04 pelle kernel: [    0.556640] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Sep  8 00:22:04 pelle kernel: [    0.556745] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Sep  8 00:22:04 pelle kernel: [    0.556830] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Sep  8 00:22:04 pelle kernel: [    0.556903] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Sep  8 00:22:04 pelle kernel: [    0.557305] mice: PS/2 mouse device common for all mice
Sep  8 00:22:04 pelle kernel: [    0.557752] rtc_cmos 00:03: RTC can wake from S4
Sep  8 00:22:04 pelle kernel: [    0.557872] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep  8 00:22:04 pelle kernel: [    0.557922] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Sep  8 00:22:04 pelle kernel: [    0.558259] device-mapper: uevent: version 1.0.3
Sep  8 00:22:04 pelle kernel: [    0.579865] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Sep  8 00:22:04 pelle kernel: [    0.580978] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Sep  8 00:22:04 pelle kernel: [    0.616371] device-mapper: multipath: version 1.1.0 loaded
Sep  8 00:22:04 pelle kernel: [    0.616382] device-mapper: multipath round-robin: version 1.0.0 loaded
Sep  8 00:22:04 pelle kernel: [    0.623914] EISA: Probing bus 0 at eisa.0
Sep  8 00:22:04 pelle kernel: [    0.623929] Cannot allocate resource for EISA slot 1
Sep  8 00:22:04 pelle kernel: [    0.623936] Cannot allocate resource for EISA slot 2
Sep  8 00:22:04 pelle kernel: [    0.623942] Cannot allocate resource for EISA slot 3
Sep  8 00:22:04 pelle kernel: [    0.623949] Cannot allocate resource for EISA slot 4
Sep  8 00:22:04 pelle kernel: [    0.623955] Cannot allocate resource for EISA slot 5
Sep  8 00:22:04 pelle kernel: [    0.623961] Cannot allocate resource for EISA slot 6
Sep  8 00:22:04 pelle kernel: [    0.623979] EISA: Detected 0 cards.
Sep  8 00:22:04 pelle kernel: [    0.667026] cpuidle: using governor ladder
Sep  8 00:22:04 pelle kernel: [    0.667376] cpuidle: using governor menu
Sep  8 00:22:04 pelle kernel: [    0.668696] TCP cubic registered
Sep  8 00:22:04 pelle kernel: [    0.669249] NET: Registered protocol family 10
Sep  8 00:22:04 pelle kernel: [    0.670541] lo: Disabled Privacy Extensions
Sep  8 00:22:04 pelle kernel: [    0.671475] NET: Registered protocol family 17
Sep  8 00:22:04 pelle kernel: [    0.672578] Using IPI No-Shortcut mode
Sep  8 00:22:04 pelle kernel: [    0.672837] PM: Resume from disk failed.
Sep  8 00:22:04 pelle kernel: [    0.672876] registered taskstats version 1
Sep  8 00:22:04 pelle kernel: [    0.673629]   Magic number: 10:594:398
Sep  8 00:22:04 pelle kernel: [    0.673784] rtc_cmos 00:03: setting system clock to 2010-09-07 21:21:53 UTC (1283894513)
Sep  8 00:22:04 pelle kernel: [    0.673793] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep  8 00:22:04 pelle kernel: [    0.673799] EDD information not available.
Sep  8 00:22:04 pelle kernel: [    0.693674] Freeing initrd memory: 7784k freed
Sep  8 00:22:04 pelle kernel: [    0.710732] isapnp: No Plug & Play device found
Sep  8 00:22:04 pelle kernel: [    0.711420] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
Sep  8 00:22:04 pelle kernel: [    0.711436] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep  8 00:22:04 pelle kernel: [    0.724872] ata1.00: configured for UDMA/133
Sep  8 00:22:04 pelle kernel: [    0.725259] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
Sep  8 00:22:04 pelle kernel: [    0.725609] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Sep  8 00:22:04 pelle kernel: [    0.725674] sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep  8 00:22:04 pelle kernel: [    0.725799] sd 0:0:0:0: [sda] Write Protect is off
Sep  8 00:22:04 pelle kernel: [    0.725808] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  8 00:22:04 pelle kernel: [    0.725899] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  8 00:22:04 pelle kernel: [    0.726266]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Sep  8 00:22:04 pelle kernel: [    0.791677] sd 0:0:0:0: [sda] Attached SCSI disk
Sep  8 00:22:04 pelle kernel: [    0.791751] Freeing unused kernel memory: 660k freed
Sep  8 00:22:04 pelle kernel: [    0.792373] Write protecting the kernel text: 4680k
Sep  8 00:22:04 pelle kernel: [    0.792450] Write protecting the kernel read-only data: 1844k
Sep  8 00:22:04 pelle kernel: [    0.828133] usb 1-5: new high speed USB device using ehci_hcd and address 2
Sep  8 00:22:04 pelle kernel: [    0.832025] udev: starting version 151
Sep  8 00:22:04 pelle kernel: [    1.096648] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep  8 00:22:04 pelle kernel: [    1.096705] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:22:04 pelle kernel: [    1.096784] r8169 0000:02:00.0: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [    1.096862]   alloc irq_desc for 28 on node -1
Sep  8 00:22:04 pelle kernel: [    1.096869]   alloc kstat_irqs on node -1
Sep  8 00:22:04 pelle kernel: [    1.096898] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
Sep  8 00:22:04 pelle kernel: [    1.098888] eth0: RTL8102e at 0xf804e000, 00:23:8b:0a:17:9d, XID 04a00000 IRQ 28
Sep  8 00:22:04 pelle kernel: [    1.171914] usb 1-5: configuration #1 chosen from 1 choice
Sep  8 00:22:04 pelle kernel: [    1.632200] usb 4-2: new full speed USB device using uhci_hcd and address 2
Sep  8 00:22:04 pelle kernel: [    1.663435] EXT4-fs (sda1): mounted filesystem with ordered data mode
Sep  8 00:22:04 pelle kernel: [    1.797941] usb 4-2: configuration #1 chosen from 1 choice
Sep  8 00:22:04 pelle kernel: [    9.445386] Adding 975864k swap on /dev/sda5.  Priority:-1 extents:1 across:975864k 
Sep  8 00:22:04 pelle kernel: [    9.487259] udev: starting version 151
Sep  8 00:22:04 pelle kernel: [    9.603275] lp: driver loaded but no devices found
Sep  8 00:22:04 pelle kernel: [    9.721589] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Sep  8 00:22:04 pelle kernel: [    9.721727] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
Sep  8 00:22:04 pelle kernel: [    9.938554] Linux agpgart interface v0.103
Sep  8 00:22:04 pelle kernel: [   10.183015] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
Sep  8 00:22:04 pelle kernel: [   10.183304] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Sep  8 00:22:04 pelle kernel: [   10.240735] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Sep  8 00:22:04 pelle kernel: [   10.270268] hso: /build/buildd/linux-2.6.32/drivers/net/usb/hso.c: 1.2 Option Wireless
Sep  8 00:22:04 pelle kernel: [   10.284900] hso0: Disabled Privacy Extensions
Sep  8 00:22:04 pelle kernel: [   10.311536] intel_rng: FWH not detected
Sep  8 00:22:04 pelle kernel: [   10.314424] usbcore: registered new interface driver hso
Sep  8 00:22:04 pelle kernel: [   10.321858] Linux video capture interface: v2.00
Sep  8 00:22:04 pelle kernel: [   10.454223] [drm] Initialized drm 1.1.0 20060810
Sep  8 00:22:04 pelle kernel: [   10.457683] acer-wmi: Acer Laptop ACPI-WMI Extras
Sep  8 00:22:04 pelle kernel: [   10.457696] acer-wmi: Blacklisted hardware detected - not loading
Sep  8 00:22:04 pelle kernel: [   10.545610] type=1505 audit(1283894523.370:2):  operation="profile_load" pid=596 name="/sbin/dhclient3"
Sep  8 00:22:04 pelle kernel: [   10.546412] type=1505 audit(1283894523.370:3):  operation="profile_load" pid=596 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:22:04 pelle kernel: [   10.555347] type=1505 audit(1283894523.378:4):  operation="profile_load" pid=596 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:22:04 pelle kernel: [   10.624623] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Sep  8 00:22:04 pelle kernel: [   10.630870] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
Sep  8 00:22:04 pelle kernel: [   10.631459] usbcore: registered new interface driver uvcvideo
Sep  8 00:22:04 pelle kernel: [   10.632160] USB Video Class driver (v0.1.0)
Sep  8 00:22:04 pelle kernel: [   10.716998] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:22:04 pelle kernel: [   10.717054] i915 0000:00:02.0: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [   10.738237] mtrr: no more MTRRs available
Sep  8 00:22:04 pelle kernel: [   10.738250] [drm] MTRR allocation failed.  Graphics performance may suffer.
Sep  8 00:22:04 pelle kernel: [   10.745193] [drm] set up 7M of stolen space
Sep  8 00:22:04 pelle kernel: [   10.866430] [drm] initialized overlay support
Sep  8 00:22:04 pelle kernel: [   10.942103] cfg80211: Calling CRDA to update world regulatory domain
Sep  8 00:22:04 pelle kernel: [   11.133002] acerhdf: Acer Aspire One Fan driver, v.0.5.20
Sep  8 00:22:04 pelle kernel: [   11.133098] acerhdf: Fan control off, to enable do:
Sep  8 00:22:04 pelle kernel: [   11.133105] acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
Sep  8 00:22:04 pelle kernel: [   11.356991] fb0: inteldrmfb frame buffer device
Sep  8 00:22:04 pelle kernel: [   11.357050] registered panic notifier
Sep  8 00:22:04 pelle kernel: [   11.357072] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep  8 00:22:04 pelle kernel: [   11.379711] vga16fb: initializing
Sep  8 00:22:04 pelle kernel: [   11.379725] vga16fb: mapped to 0xc00a0000
Sep  8 00:22:04 pelle kernel: [   11.379736] vga16fb: not registering due to another framebuffer present
Sep  8 00:22:04 pelle kernel: [   11.401174] cfg80211: World regulatory domain updated:
Sep  8 00:22:04 pelle kernel: [   11.401185] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep  8 00:22:04 pelle kernel: [   11.401196] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:22:04 pelle kernel: [   11.401205] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:22:04 pelle kernel: [   11.401214] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:22:04 pelle kernel: [   11.401223] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:22:04 pelle kernel: [   11.401232] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:22:04 pelle kernel: [   11.430977] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:22:04 pelle kernel: [   11.431021] ath5k 0000:03:00.0: setting latency timer to 64
Sep  8 00:22:04 pelle kernel: [   11.431124] ath5k 0000:03:00.0: registered as 'phy0'
Sep  8 00:22:04 pelle kernel: [   11.700047] Console: switching to colour frame buffer device 128x37
Sep  8 00:22:04 pelle NetworkManager: <info>  starting...
Sep  8 00:22:04 pelle NetworkManager: <info>  Trying to start the modem-manager...
Sep  8 00:22:04 pelle NetworkManager:    SCPlugin-Ifupdown: init!
Sep  8 00:22:04 pelle NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Sep  8 00:22:04 pelle NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Sep  8 00:22:04 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0)
Sep  8 00:22:04 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Sep  8 00:22:04 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0)
Sep  8 00:22:04 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0): no ifupdown configuration found.
Sep  8 00:22:04 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Sep  8 00:22:04 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Sep  8 00:22:04 pelle NetworkManager:    SCPlugin-Ifupdown: end _init.
Sep  8 00:22:04 pelle NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:22:04 pelle NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:22:04 pelle NetworkManager: <info>  Found wwan radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/rfkill/rfkill0) (driver usb)
Sep  8 00:22:04 pelle modem-manager: Loaded plugin MotoC
Sep  8 00:22:04 pelle modem-manager: Loaded plugin Gobi
Sep  8 00:22:04 pelle modem-manager: Loaded plugin Huawei
Sep  8 00:22:04 pelle NetworkManager: <info>  WiFi enabled by radio killswitch; disabled by state file
Sep  8 00:22:04 pelle NetworkManager: <info>  WWAN enabled by radio killswitch; disabled by state file
Sep  8 00:22:04 pelle NetworkManager:    SCPlugin-Ifupdown: (156386544) ... get_connections.
Sep  8 00:22:04 pelle NetworkManager:    SCPlugin-Ifupdown: (156386544) ... get_connections (managed=false): return empty list.
Sep  8 00:22:04 pelle modem-manager: Loaded plugin Nokia
Sep  8 00:22:04 pelle modem-manager: Loaded plugin ZTE
Sep  8 00:22:04 pelle modem-manager: Loaded plugin Option
Sep  8 00:22:04 pelle modem-manager: Loaded plugin Sierra
Sep  8 00:22:04 pelle modem-manager: Loaded plugin Novatel
Sep  8 00:22:04 pelle modem-manager: Loaded plugin Ericsson MBM
Sep  8 00:22:04 pelle modem-manager: Loaded plugin Generic
Sep  8 00:22:04 pelle modem-manager: Loaded plugin Option High-Speed
Sep  8 00:22:04 pelle modem-manager: Loaded plugin AnyData
Sep  8 00:22:04 pelle modem-manager: Loaded plugin Longcheer
Sep  8 00:22:04 pelle NetworkManager:    Ifupdown: get unmanaged devices count: 0
Sep  8 00:22:04 pelle NetworkManager: <info>  (eth0): carrier is OFF
Sep  8 00:22:04 pelle NetworkManager: <info>  (eth0): new Ethernet device (driver: 'r8169')
Sep  8 00:22:04 pelle NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep  8 00:22:04 pelle NetworkManager: <info>  (eth0): now managed
Sep  8 00:22:04 pelle NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Sep  8 00:22:04 pelle NetworkManager: <info>  (eth0): bringing up device.
Sep  8 00:22:04 pelle NetworkManager: <info>  (eth0): preparing device.
Sep  8 00:22:04 pelle NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Sep  8 00:22:04 pelle NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0
Sep  8 00:22:04 pelle NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Sep  8 00:22:04 pelle NetworkManager: <info>  modem-manager is now available
Sep  8 00:22:04 pelle NetworkManager: <info>  Trying to start the supplicant...
Sep  8 00:22:05 pelle kernel: [   11.905491] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
Sep  8 00:22:05 pelle kernel: [   11.964146] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Sep  8 00:22:05 pelle kernel: [   12.072556] type=1505 audit(1283894524.898:5):  operation="profile_load" pid=752 name="/usr/share/gdm/guest-session/Xsession"
Sep  8 00:22:05 pelle kernel: [   12.094232] type=1505 audit(1283894524.918:6):  operation="profile_replace" pid=756 name="/sbin/dhclient3"
Sep  8 00:22:05 pelle kernel: [   12.095043] type=1505 audit(1283894524.918:7):  operation="profile_replace" pid=756 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:22:05 pelle kernel: [   12.095513] type=1505 audit(1283894524.918:8):  operation="profile_replace" pid=756 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:22:05 pelle kernel: [   12.113105] r8169: eth0: link down
Sep  8 00:22:05 pelle kernel: [   12.113783] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep  8 00:22:05 pelle kernel: [   12.129108] type=1505 audit(1283894524.954:9):  operation="profile_load" pid=757 name="/usr/bin/evince"
Sep  8 00:22:05 pelle kernel: [   12.171965] type=1505 audit(1283894524.994:10):  operation="profile_load" pid=757 name="/usr/bin/evince-previewer"
Sep  8 00:22:05 pelle kernel: [   12.188674] type=1505 audit(1283894525.014:11):  operation="profile_load" pid=757 name="/usr/bin/evince-thumbnailer"
Sep  8 00:22:05 pelle kernel: [   12.312527] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:22:05 pelle kernel: [   12.312611] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep  8 00:22:05 pelle modem-manager: (ttyHS0) opening serial device...
Sep  8 00:22:05 pelle modem-manager: (ttyHS0): probe requested by plugin 'Option High-Speed'
Sep  8 00:22:05 pelle modem-manager: (ttyHS1) opening serial device...
Sep  8 00:22:05 pelle modem-manager: (ttyHS1): probe requested by plugin 'Option High-Speed'
Sep  8 00:22:05 pelle modem-manager: (ttyHS2) opening serial device...
Sep  8 00:22:05 pelle modem-manager: (ttyHS2): probe requested by plugin 'Option High-Speed'
Sep  8 00:22:05 pelle modem-manager: (ttyHS3) opening serial device...
Sep  8 00:22:05 pelle modem-manager: (ttyHS3): probe requested by plugin 'Option High-Speed'
Sep  8 00:22:05 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port hso0
Sep  8 00:22:05 pelle modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2
Sep  8 00:22:05 pelle kernel: [   12.447022] ath: EEPROM regdomain: 0x65
Sep  8 00:22:05 pelle kernel: [   12.447031] ath: EEPROM indicates we should expect a direct regpair map
Sep  8 00:22:05 pelle kernel: [   12.447042] ath: Country alpha2 being used: 00
Sep  8 00:22:05 pelle kernel: [   12.447048] ath: Regpair used: 0x65
Sep  8 00:22:05 pelle kernel: [   12.508266] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Sep  8 00:22:05 pelle kernel: [   12.592370] phy0: Selected rate control algorithm 'minstrel'
Sep  8 00:22:05 pelle kernel: [   12.594885] Registered led device: ath5k-phy0::rx
Sep  8 00:22:05 pelle kernel: [   12.594963] Registered led device: ath5k-phy0::tx
Sep  8 00:22:05 pelle kernel: [   12.594974] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Sep  8 00:22:05 pelle NetworkManager: <info>  Found wlan radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill1) (driver <unknown>)
Sep  8 00:22:05 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0)
Sep  8 00:22:05 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Sep  8 00:22:05 pelle NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
Sep  8 00:22:05 pelle NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'ath5k')
Sep  8 00:22:05 pelle NetworkManager: <info>  (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep  8 00:22:05 pelle NetworkManager: <info>  (wlan0): now managed
Sep  8 00:22:05 pelle NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Sep  8 00:22:05 pelle NetworkManager: <info>  (wlan0): bringing up device.
Sep  8 00:22:05 pelle kernel: [   12.832677] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep  8 00:22:05 pelle NetworkManager: <info>  (wlan0): preparing device.
Sep  8 00:22:05 pelle NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Sep  8 00:22:05 pelle NetworkManager: <info>  WiFi now disabled by radio killswitch
Sep  8 00:22:05 pelle NetworkManager: <WARN>  nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface.
Sep  8 00:22:05 pelle kernel: [   13.131020] ppdev: user-space parallel port driver
Sep  8 00:22:06 pelle kernel: [   13.825924] CPU0 attaching NULL sched-domain.
Sep  8 00:22:06 pelle kernel: [   13.825939] CPU1 attaching NULL sched-domain.
Sep  8 00:22:06 pelle kernel: [   13.848250] CPU0 attaching sched-domain:
Sep  8 00:22:06 pelle kernel: [   13.848266]  domain 0: span 0-1 level SIBLING
Sep  8 00:22:06 pelle kernel: [   13.848279]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:22:06 pelle kernel: [   13.848305]   domain 1: span 0-1 level MC
Sep  8 00:22:06 pelle kernel: [   13.848315]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:22:06 pelle kernel: [   13.848337] CPU1 attaching sched-domain:
Sep  8 00:22:06 pelle kernel: [   13.848347]  domain 0: span 0-1 level SIBLING
Sep  8 00:22:06 pelle kernel: [   13.848358]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:22:06 pelle kernel: [   13.848381]   domain 1: span 0-1 level MC
Sep  8 00:22:06 pelle kernel: [   13.848391]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:22:08 pelle modem-manager: (ttyHS0) closing serial device...
Sep  8 00:22:08 pelle modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 as /org/freedesktop/ModemManager/Modems/0
Sep  8 00:22:08 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS0
Sep  8 00:22:08 pelle modem-manager: (ttyHS1) closing serial device...
Sep  8 00:22:08 pelle modem-manager: (ttyHS3) closing serial device...
Sep  8 00:22:08 pelle NetworkManager: <info>  (hso0): new GSM device (driver: 'hso')
Sep  8 00:22:08 pelle NetworkManager: <info>  (hso0): exported as /org/freedesktop/NetworkManager/Devices/2
Sep  8 00:22:08 pelle NetworkManager: <info>  (hso0): now managed
Sep  8 00:22:08 pelle NetworkManager: <info>  (hso0): device state change: 1 -> 2 (reason 2)
Sep  8 00:22:08 pelle NetworkManager: <info>  (hso0): deactivating device (reason: 2).
Sep  8 00:22:08 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS1
Sep  8 00:22:08 pelle NetworkManager: <info>  (hso0): device state change: 2 -> 3 (reason 0)
Sep  8 00:22:08 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS3
Sep  8 00:22:09 pelle kernel: [   16.740981] CPU0 attaching NULL sched-domain.
Sep  8 00:22:09 pelle kernel: [   16.740996] CPU1 attaching NULL sched-domain.
Sep  8 00:22:09 pelle kernel: [   16.774990] CPU0 attaching sched-domain:
Sep  8 00:22:09 pelle kernel: [   16.774999]  domain 0: span 0-1 level SIBLING
Sep  8 00:22:09 pelle kernel: [   16.775006]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:22:09 pelle kernel: [   16.775019]   domain 1: span 0-1 level MC
Sep  8 00:22:09 pelle kernel: [   16.775025]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:22:09 pelle kernel: [   16.775037] CPU1 attaching sched-domain:
Sep  8 00:22:09 pelle kernel: [   16.775042]  domain 0: span 0-1 level SIBLING
Sep  8 00:22:09 pelle kernel: [   16.775047]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:22:09 pelle kernel: [   16.775059]   domain 1: span 0-1 level MC
Sep  8 00:22:09 pelle kernel: [   16.775064]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:22:19 pelle modem-manager: (ttyHS2) closing serial device...
Sep  8 00:22:48 pelle kernel: [   56.142360] __ratelimit: 9 callbacks suppressed
Sep  8 00:22:48 pelle kernel: [   56.142373] python[1354] general protection ip:8f8a154 sp:bfd4e490 error:0 in QtGui.so[8bbe000+4f8000]
Sep  8 00:22:49 pelle kernel: Kernel logging (proc) stopped.
Sep  8 00:23:26 pelle kernel: imklog 4.2.0, log source = /proc/kmsg started.
Sep  8 00:23:26 pelle kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep  8 00:23:26 pelle kernel: [    0.000000] Initializing cgroup subsys cpu
Sep  8 00:23:26 pelle kernel: [    0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
Sep  8 00:23:26 pelle kernel: [    0.000000] KERNEL supported cpus:
Sep  8 00:23:26 pelle kernel: [    0.000000]   Intel GenuineIntel
Sep  8 00:23:26 pelle kernel: [    0.000000]   AMD AuthenticAMD
Sep  8 00:23:26 pelle kernel: [    0.000000]   NSC Geode by NSC
Sep  8 00:23:26 pelle kernel: [    0.000000]   Cyrix CyrixInstead
Sep  8 00:23:26 pelle kernel: [    0.000000]   Centaur CentaurHauls
Sep  8 00:23:26 pelle kernel: [    0.000000]   Transmeta GenuineTMx86
Sep  8 00:23:26 pelle kernel: [    0.000000]   Transmeta TransmetaCPU
Sep  8 00:23:26 pelle kernel: [    0.000000]   UMC UMC UMC UMC
Sep  8 00:23:26 pelle kernel: [    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:23:26 pelle kernel: [    0.000000] BIOS-provided physical RAM map:
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000] DMI 2.4 present.
Sep  8 00:23:26 pelle kernel: [    0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
Sep  8 00:23:26 pelle kernel: [    0.000000] MTRR default type: uncachable
Sep  8 00:23:26 pelle kernel: [    0.000000] MTRR fixed ranges enabled:
Sep  8 00:23:26 pelle kernel: [    0.000000]   00000-9FFFF write-back
Sep  8 00:23:26 pelle kernel: [    0.000000]   A0000-BFFFF uncachable
Sep  8 00:23:26 pelle kernel: [    0.000000]   C0000-C7FFF write-protect
Sep  8 00:23:26 pelle kernel: [    0.000000]   C8000-EFFFF uncachable
Sep  8 00:23:26 pelle kernel: [    0.000000]   F0000-FFFFF write-protect
Sep  8 00:23:26 pelle kernel: [    0.000000] MTRR variable ranges enabled:
Sep  8 00:23:26 pelle kernel: [    0.000000]   0 base 0FFFE0000 mask 0FFFE0000 write-protect
Sep  8 00:23:26 pelle kernel: [    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
Sep  8 00:23:26 pelle kernel: [    0.000000]   2 base 000000000 mask 0E0000000 write-back
Sep  8 00:23:26 pelle kernel: [    0.000000]   3 base 020000000 mask 0E0000000 write-back
Sep  8 00:23:26 pelle kernel: [    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
Sep  8 00:23:26 pelle kernel: [    0.000000]   5 base 03F600000 mask 0FFE00000 uncachable
Sep  8 00:23:26 pelle kernel: [    0.000000]   6 base 03F500000 mask 0FFF00000 uncachable
Sep  8 00:23:26 pelle kernel: [    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
Sep  8 00:23:26 pelle kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep  8 00:23:26 pelle kernel: [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000] Scanning 1 areas for low memory corruption
Sep  8 00:23:26 pelle kernel: [    0.000000] modified physical RAM map:
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:23:26 pelle kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Sep  8 00:23:26 pelle kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Sep  8 00:23:26 pelle kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Sep  8 00:23:26 pelle kernel: [    0.000000]  0000000000 - 00377fe000 page 4k
Sep  8 00:23:26 pelle kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 8e2000-9c3000
Sep  8 00:23:26 pelle kernel: [    0.000000] RAMDISK: 2ef3e000 - 2f6d8324
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: RSDP 000fe020 00024 (v02 INTEL )
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: XSDT 3f4fe120 00064 (v01 INTEL  Napa     00000001      01000013)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: FACP 3f4fc000 000F4 (v04 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: DSDT 3f4f2000 05DE4 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: FACS 3f488000 00040
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: SSDT 3f4fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: HPET 3f4fb000 00038 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: APIC 3f4fa000 00068 (v02 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: MCFG 3f4f9000 0003C (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: SLIC 3f4f1000 00180 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: BOOT 3f4f0000 00028 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:23:26 pelle kernel: [    0.000000] 125MB HIGHMEM available.
Sep  8 00:23:26 pelle kernel: [    0.000000] 887MB LOWMEM available.
Sep  8 00:23:26 pelle kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Sep  8 00:23:26 pelle kernel: [    0.000000]   low ram: 0 - 377fe000
Sep  8 00:23:26 pelle kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Sep  8 00:23:26 pelle kernel: [    0.000000]   node 0 bootmap 00007000 - 0000df00
Sep  8 00:23:26 pelle kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Sep  8 00:23:26 pelle kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Sep  8 00:23:26 pelle kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Sep  8 00:23:26 pelle kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Sep  8 00:23:26 pelle kernel: [    0.000000]   #3 [0000100000 - 00008ddeb8]    TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
Sep  8 00:23:26 pelle kernel: [    0.000000]   #4 [002ef3e000 - 002f6d8324]          RAMDISK ==> [002ef3e000 - 002f6d8324]
Sep  8 00:23:26 pelle kernel: [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Sep  8 00:23:26 pelle kernel: [    0.000000]   #6 [00008de000 - 00008e1244]              BRK ==> [00008de000 - 00008e1244]
Sep  8 00:23:26 pelle kernel: [    0.000000]   #7 [00008e2000 - 00009bd000]          PGTABLE ==> [00008e2000 - 00009bd000]
Sep  8 00:23:26 pelle kernel: [    0.000000]   #8 [0000007000 - 000000e000]          BOOTMAP ==> [0000007000 - 000000e000]
Sep  8 00:23:26 pelle kernel: [    0.000000] Zone PFN ranges:
Sep  8 00:23:26 pelle kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Sep  8 00:23:26 pelle kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Sep  8 00:23:26 pelle kernel: [    0.000000]   HighMem  0x000377fe -> 0x0003f500
Sep  8 00:23:26 pelle kernel: [    0.000000] Movable zone start PFN for each node
Sep  8 00:23:26 pelle kernel: [    0.000000] early_node_map[6] active PFN ranges
Sep  8 00:23:26 pelle kernel: [    0.000000]     0: 0x00000000 -> 0x00000002
Sep  8 00:23:26 pelle kernel: [    0.000000]     0: 0x00000006 -> 0x0000009f
Sep  8 00:23:26 pelle kernel: [    0.000000]     0: 0x00000100 -> 0x0003f376
Sep  8 00:23:26 pelle kernel: [    0.000000]     0: 0x0003f3bf -> 0x0003f46d
Sep  8 00:23:26 pelle kernel: [    0.000000]     0: 0x0003f4bf -> 0x0003f4f0
Sep  8 00:23:26 pelle kernel: [    0.000000]     0: 0x0003f4ff -> 0x0003f500
Sep  8 00:23:26 pelle kernel: [    0.000000] On node 0 totalpages: 259057
Sep  8 00:23:26 pelle kernel: [    0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000
Sep  8 00:23:26 pelle kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Sep  8 00:23:26 pelle kernel: [    0.000000]   DMA zone: 0 pages reserved
Sep  8 00:23:26 pelle kernel: [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
Sep  8 00:23:26 pelle kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Sep  8 00:23:26 pelle kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Sep  8 00:23:26 pelle kernel: [    0.000000]   HighMem zone: 251 pages used for memmap
Sep  8 00:23:26 pelle kernel: [    0.000000]   HighMem zone: 31581 pages, LIFO batch:7
Sep  8 00:23:26 pelle kernel: [    0.000000] Using APIC driver default
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Sep  8 00:23:26 pelle kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: IRQ2 used by override.
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep  8 00:23:26 pelle kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep  8 00:23:26 pelle kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep  8 00:23:26 pelle kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep  8 00:23:26 pelle kernel: [    0.000000] nr_irqs_gsi: 24
Sep  8 00:23:26 pelle kernel: [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Sep  8 00:23:26 pelle kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep  8 00:23:26 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Sep  8 00:23:26 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Sep  8 00:23:26 pelle kernel: [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Sep  8 00:23:26 pelle kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep  8 00:23:26 pelle kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Sep  8 00:23:26 pelle kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536
Sep  8 00:23:26 pelle kernel: [    0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
Sep  8 00:23:26 pelle kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 
Sep  8 00:23:26 pelle kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257030
Sep  8 00:23:26 pelle kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=05e65f51-4919-405f-ae5e-374a2ae344e8 ro quiet splash
Sep  8 00:23:26 pelle kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Sep  8 00:23:26 pelle kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep  8 00:23:26 pelle kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep  8 00:23:26 pelle kernel: [    0.000000] Enabling fast FPU save and restore... done.
Sep  8 00:23:26 pelle kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Sep  8 00:23:26 pelle kernel: [    0.000000] Initializing CPU#0
Sep  8 00:23:26 pelle kernel: [    0.000000] allocated 5186560 bytes of page_cgroup
Sep  8 00:23:26 pelle kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep  8 00:23:26 pelle kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
Sep  8 00:23:26 pelle kernel: [    0.000000] Memory: 1004836k/1037312k available (4679k kernel code, 30884k reserved, 2124k data, 660k init, 127328k highmem)
Sep  8 00:23:26 pelle kernel: [    0.000000] virtual kernel memory layout:
Sep  8 00:23:26 pelle kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Sep  8 00:23:26 pelle kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Sep  8 00:23:26 pelle kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Sep  8 00:23:26 pelle kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Sep  8 00:23:26 pelle kernel: [    0.000000]       .init : 0xc07a5000 - 0xc084a000   ( 660 kB)
Sep  8 00:23:26 pelle kernel: [    0.000000]       .data : 0xc0591e33 - 0xc07a4e88   (2124 kB)
Sep  8 00:23:26 pelle kernel: [    0.000000]       .text : 0xc0100000 - 0xc0591e33   (4679 kB)
Sep  8 00:23:26 pelle kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Sep  8 00:23:26 pelle kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep  8 00:23:26 pelle kernel: [    0.000000] Hierarchical RCU implementation.
Sep  8 00:23:26 pelle kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Sep  8 00:23:26 pelle kernel: [    0.000000] Console: colour VGA+ 80x25
Sep  8 00:23:26 pelle kernel: [    0.000000] console [tty0] enabled
Sep  8 00:23:26 pelle kernel: [    0.000000] hpet clockevent registered
Sep  8 00:23:26 pelle kernel: [    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Sep  8 00:23:26 pelle kernel: [    0.000000] Fast TSC calibration using PIT
Sep  8 00:23:26 pelle kernel: [    0.000000] Detected 1596.011 MHz processor.
Sep  8 00:23:26 pelle kernel: [    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.02 BogoMIPS (lpj=6384044)
Sep  8 00:23:26 pelle kernel: [    0.004049] Security Framework initialized
Sep  8 00:23:26 pelle kernel: [    0.004094] AppArmor: AppArmor initialized
Sep  8 00:23:26 pelle kernel: [    0.004110] Mount-cache hash table entries: 512
Sep  8 00:23:26 pelle kernel: [    0.004358] Initializing cgroup subsys ns
Sep  8 00:23:26 pelle kernel: [    0.004368] Initializing cgroup subsys cpuacct
Sep  8 00:23:26 pelle kernel: [    0.004378] Initializing cgroup subsys memory
Sep  8 00:23:26 pelle kernel: [    0.004393] Initializing cgroup subsys devices
Sep  8 00:23:26 pelle kernel: [    0.004399] Initializing cgroup subsys freezer
Sep  8 00:23:26 pelle kernel: [    0.004405] Initializing cgroup subsys net_cls
Sep  8 00:23:26 pelle kernel: [    0.004439] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:23:26 pelle kernel: [    0.004448] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:23:26 pelle kernel: [    0.004455] CPU: L2 cache: 512K
Sep  8 00:23:26 pelle kernel: [    0.004461] CPU: Physical Processor ID: 0
Sep  8 00:23:26 pelle kernel: [    0.004465] CPU: Processor Core ID: 0
Sep  8 00:23:26 pelle kernel: [    0.004474] mce: CPU supports 5 MCE banks
Sep  8 00:23:26 pelle kernel: [    0.004492] CPU0: Thermal monitoring enabled (TM1)
Sep  8 00:23:26 pelle kernel: [    0.004502] using mwait in idle threads.
Sep  8 00:23:26 pelle kernel: [    0.004514] Performance Events: Atom events, Intel PMU driver.
Sep  8 00:23:26 pelle kernel: [    0.004532] ... version:                3
Sep  8 00:23:26 pelle kernel: [    0.004537] ... bit width:              40
Sep  8 00:23:26 pelle kernel: [    0.004541] ... generic registers:      2
Sep  8 00:23:26 pelle kernel: [    0.004547] ... value mask:             000000ffffffffff
Sep  8 00:23:26 pelle kernel: [    0.004552] ... max period:             000000007fffffff
Sep  8 00:23:26 pelle kernel: [    0.004557] ... fixed-purpose events:   3
Sep  8 00:23:26 pelle kernel: [    0.004562] ... event mask:             0000000700000003
Sep  8 00:23:26 pelle kernel: [    0.004571] Checking 'hlt' instruction... OK.
Sep  8 00:23:26 pelle kernel: [    0.020010] Disabling 4MB page tables to avoid TLB bug
Sep  8 00:23:26 pelle kernel: [    0.024449] ACPI: Core revision 20090903
Sep  8 00:23:26 pelle kernel: [    0.040018] ftrace: converting mcount calls to 0f 1f 44 00 00
Sep  8 00:23:26 pelle kernel: [    0.040030] ftrace: allocating 21780 entries in 43 pages
Sep  8 00:23:26 pelle kernel: [    0.044111] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep  8 00:23:26 pelle kernel: [    0.044518] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep  8 00:23:26 pelle kernel: [    0.087074] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:23:26 pelle kernel: [    0.088001] Booting processor 1 APIC 0x1 ip 0x6000
Sep  8 00:23:26 pelle kernel: [    0.008000] Initializing CPU#1
Sep  8 00:23:26 pelle kernel: [    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:23:26 pelle kernel: [    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:23:26 pelle kernel: [    0.008000] CPU: L2 cache: 512K
Sep  8 00:23:26 pelle kernel: [    0.008000] CPU: Physical Processor ID: 0
Sep  8 00:23:26 pelle kernel: [    0.008000] CPU: Processor Core ID: 0
Sep  8 00:23:26 pelle kernel: [    0.008000] CPU1: Thermal monitoring enabled (TM1)
Sep  8 00:23:26 pelle kernel: [    0.172156] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:23:26 pelle kernel: [    0.172189] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep  8 00:23:26 pelle kernel: [    0.176035] Brought up 2 CPUs
Sep  8 00:23:26 pelle kernel: [    0.176043] Total of 2 processors activated (6383.97 BogoMIPS).
Sep  8 00:23:26 pelle kernel: [    0.176295] CPU0 attaching sched-domain:
Sep  8 00:23:26 pelle kernel: [    0.176305]  domain 0: span 0-1 level SIBLING
Sep  8 00:23:26 pelle kernel: [    0.176311]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:23:26 pelle kernel: [    0.176324]   domain 1: span 0-1 level MC
Sep  8 00:23:26 pelle kernel: [    0.176329]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:23:26 pelle kernel: [    0.176341] CPU1 attaching sched-domain:
Sep  8 00:23:26 pelle kernel: [    0.176346]  domain 0: span 0-1 level SIBLING
Sep  8 00:23:26 pelle kernel: [    0.176351]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:23:26 pelle kernel: [    0.176363]   domain 1: span 0-1 level MC
Sep  8 00:23:26 pelle kernel: [    0.176368]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:23:26 pelle kernel: [    0.176599] devtmpfs: initialized
Sep  8 00:23:26 pelle kernel: [    0.176599] regulator: core version 0.5
Sep  8 00:23:26 pelle kernel: [    0.176599] Time: 21:23:15  Date: 09/07/10
Sep  8 00:23:26 pelle kernel: [    0.176599] NET: Registered protocol family 16
Sep  8 00:23:26 pelle kernel: [    0.176599] Trying to unpack rootfs image as initramfs...
Sep  8 00:23:26 pelle kernel: [    0.176599] EISA bus registered
Sep  8 00:23:26 pelle kernel: [    0.176612] ACPI: bus type pci registered
Sep  8 00:23:26 pelle kernel: [    0.176785] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Sep  8 00:23:26 pelle kernel: [    0.176794] PCI: MCFG area at e0000000 reserved in E820
Sep  8 00:23:26 pelle kernel: [    0.176800] PCI: Using MMCONFIG for extended config space
Sep  8 00:23:26 pelle kernel: [    0.176807] PCI: Using configuration type 1 for base access
Sep  8 00:23:26 pelle kernel: [    0.181883] bio: create slab <bio-0> at 0
Sep  8 00:23:26 pelle kernel: [    0.184446] ACPI: EC: Look up EC in DSDT
Sep  8 00:23:26 pelle kernel: [    0.188716] ACPI: Executed 1 blocks of module-level executable AML code
Sep  8 00:23:26 pelle kernel: [    0.193096] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:23:26 pelle kernel: [    0.193373] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:23:26 pelle kernel: [    0.200448] ACPI: Interpreter enabled
Sep  8 00:23:26 pelle kernel: [    0.200467] ACPI: (supports S0 S3 S4 S5)
Sep  8 00:23:26 pelle kernel: [    0.200539] ACPI: Using IOAPIC for interrupt routing
Sep  8 00:23:26 pelle kernel: [    0.214322] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Sep  8 00:23:26 pelle kernel: [    0.214996] ACPI: No dock devices found.
Sep  8 00:23:26 pelle kernel: [    0.216788] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.216809] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.216832] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
Sep  8 00:23:26 pelle kernel: [    0.216905] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep  8 00:23:26 pelle kernel: [    0.217120] pci 0000:00:02.0: reg 10 32bit mmio: [0x58480000-0x584fffff]
Sep  8 00:23:26 pelle kernel: [    0.217134] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
Sep  8 00:23:26 pelle kernel: [    0.217146] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
Sep  8 00:23:26 pelle kernel: [    0.217158] pci 0000:00:02.0: reg 1c 32bit mmio: [0x58500000-0x5853ffff]
Sep  8 00:23:26 pelle kernel: [    0.217227] pci 0000:00:02.1: reg 10 32bit mmio: [0x58400000-0x5847ffff]
Sep  8 00:23:26 pelle kernel: [    0.217392] pci 0000:00:1b.0: reg 10 64bit mmio: [0x58540000-0x58543fff]
Sep  8 00:23:26 pelle kernel: [    0.217476] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep  8 00:23:26 pelle kernel: [    0.217488] pci 0000:00:1b.0: PME# disabled
Sep  8 00:23:26 pelle kernel: [    0.217615] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep  8 00:23:26 pelle kernel: [    0.217626] pci 0000:00:1c.0: PME# disabled
Sep  8 00:23:26 pelle kernel: [    0.217765] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep  8 00:23:26 pelle kernel: [    0.217777] pci 0000:00:1c.1: PME# disabled
Sep  8 00:23:26 pelle kernel: [    0.217909] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Sep  8 00:23:26 pelle kernel: [    0.217920] pci 0000:00:1c.2: PME# disabled
Sep  8 00:23:26 pelle kernel: [    0.218051] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Sep  8 00:23:26 pelle kernel: [    0.218062] pci 0000:00:1c.3: PME# disabled
Sep  8 00:23:26 pelle kernel: [    0.218154] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
Sep  8 00:23:26 pelle kernel: [    0.218249] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
Sep  8 00:23:26 pelle kernel: [    0.218339] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
Sep  8 00:23:26 pelle kernel: [    0.218433] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
Sep  8 00:23:26 pelle kernel: [    0.218542] pci 0000:00:1d.7: reg 10 32bit mmio: [0x58544400-0x585447ff]
Sep  8 00:23:26 pelle kernel: [    0.218632] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Sep  8 00:23:26 pelle kernel: [    0.218644] pci 0000:00:1d.7: PME# disabled
Sep  8 00:23:26 pelle kernel: [    0.218881] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Sep  8 00:23:26 pelle kernel: [    0.218893] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Sep  8 00:23:26 pelle kernel: [    0.218911] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
Sep  8 00:23:26 pelle kernel: [    0.219003] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
Sep  8 00:23:26 pelle kernel: [    0.219018] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
Sep  8 00:23:26 pelle kernel: [    0.219033] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
Sep  8 00:23:26 pelle kernel: [    0.219048] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
Sep  8 00:23:26 pelle kernel: [    0.219063] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
Sep  8 00:23:26 pelle kernel: [    0.219113] pci 0000:00:1f.2: PME# supported from D3hot
Sep  8 00:23:26 pelle kernel: [    0.219123] pci 0000:00:1f.2: PME# disabled
Sep  8 00:23:26 pelle kernel: [    0.219207] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
Sep  8 00:23:26 pelle kernel: [    0.219348] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
Sep  8 00:23:26 pelle kernel: [    0.219361] pci 0000:00:1c.0: bridge 32bit mmio: [0x57300000-0x583fffff]
Sep  8 00:23:26 pelle kernel: [    0.219379] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
Sep  8 00:23:26 pelle kernel: [    0.219476] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
Sep  8 00:23:26 pelle kernel: [    0.219514] pci 0000:02:00.0: reg 18 64bit mmio pref: [0x51010000-0x51010fff]
Sep  8 00:23:26 pelle kernel: [    0.219543] pci 0000:02:00.0: reg 20 64bit mmio pref: [0x51000000-0x5100ffff]
Sep  8 00:23:26 pelle kernel: [    0.219561] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
Sep  8 00:23:26 pelle kernel: [    0.219632] pci 0000:02:00.0: supports D1 D2
Sep  8 00:23:26 pelle kernel: [    0.219639] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep  8 00:23:26 pelle kernel: [    0.219651] pci 0000:02:00.0: PME# disabled
Sep  8 00:23:26 pelle kernel: [    0.219764] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
Sep  8 00:23:26 pelle kernel: [    0.219776] pci 0000:00:1c.1: bridge 32bit mmio: [0x56300000-0x572fffff]
Sep  8 00:23:26 pelle kernel: [    0.219791] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
Sep  8 00:23:26 pelle kernel: [    0.219957] pci 0000:03:00.0: reg 10 64bit mmio: [0x55200000-0x5520ffff]
Sep  8 00:23:26 pelle kernel: [    0.220359] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
Sep  8 00:23:26 pelle kernel: [    0.220372] pci 0000:00:1c.2: bridge 32bit mmio: [0x55200000-0x562fffff]
Sep  8 00:23:26 pelle kernel: [    0.220388] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52100000-0x530fffff]
Sep  8 00:23:26 pelle kernel: [    0.220475] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
Sep  8 00:23:26 pelle kernel: [    0.220487] pci 0000:00:1c.3: bridge 32bit mmio: [0x54100000-0x551fffff]
Sep  8 00:23:26 pelle kernel: [    0.220502] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53100000-0x540fffff]
Sep  8 00:23:26 pelle kernel: [    0.220591] pci 0000:00:1e.0: transparent bridge
Sep  8 00:23:26 pelle kernel: [    0.220650] pci_bus 0000:00: on NUMA node 0
Sep  8 00:23:26 pelle kernel: [    0.220674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep  8 00:23:26 pelle kernel: [    0.221176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
Sep  8 00:23:26 pelle kernel: [    0.221587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
Sep  8 00:23:26 pelle kernel: [    0.221890] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
Sep  8 00:23:26 pelle kernel: [    0.222136] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
Sep  8 00:23:26 pelle kernel: [    0.222366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
Sep  8 00:23:26 pelle kernel: [    0.222941] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.222962] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.235578] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:23:26 pelle kernel: [    0.235897] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:23:26 pelle kernel: [    0.236238] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:23:26 pelle kernel: [    0.236562] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:23:26 pelle kernel: [    0.236865] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:23:26 pelle kernel: [    0.237178] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:23:26 pelle kernel: [    0.237496] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:23:26 pelle kernel: [    0.237800] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:23:26 pelle kernel: [    0.238166] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep  8 00:23:26 pelle kernel: [    0.238201] vgaarb: loaded
Sep  8 00:23:26 pelle kernel: [    0.238552] SCSI subsystem initialized
Sep  8 00:23:26 pelle kernel: [    0.238788] libata version 3.00 loaded.
Sep  8 00:23:26 pelle kernel: [    0.239054] usbcore: registered new interface driver usbfs
Sep  8 00:23:26 pelle kernel: [    0.239106] usbcore: registered new interface driver hub
Sep  8 00:23:26 pelle kernel: [    0.239207] usbcore: registered new device driver usb
Sep  8 00:23:26 pelle kernel: [    0.239888] ACPI: WMI: Mapper loaded
Sep  8 00:23:26 pelle kernel: [    0.239896] PCI: Using ACPI for IRQ routing
Sep  8 00:23:26 pelle kernel: [    0.240391] NetLabel: Initializing
Sep  8 00:23:26 pelle kernel: [    0.240398] NetLabel:  domain hash size = 128
Sep  8 00:23:26 pelle kernel: [    0.240403] NetLabel:  protocols = UNLABELED CIPSOv4
Sep  8 00:23:26 pelle kernel: [    0.240437] NetLabel:  unlabeled traffic allowed by default
Sep  8 00:23:26 pelle kernel: [    0.240549] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep  8 00:23:26 pelle kernel: [    0.240565] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Sep  8 00:23:26 pelle kernel: [    0.244598] Switching to clocksource tsc
Sep  8 00:23:26 pelle kernel: [    0.249015] AppArmor: AppArmor Filesystem Enabled
Sep  8 00:23:26 pelle kernel: [    0.249057] pnp: PnP ACPI init
Sep  8 00:23:26 pelle kernel: [    0.249099] ACPI: bus type pnp registered
Sep  8 00:23:26 pelle kernel: [    0.251791] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
Sep  8 00:23:26 pelle kernel: [    0.253495] pnp: PnP ACPI: found 9 devices
Sep  8 00:23:26 pelle kernel: [    0.253503] ACPI: ACPI bus type pnp unregistered
Sep  8 00:23:26 pelle kernel: [    0.253513] PnPBIOS: Disabled by ACPI PNP
Sep  8 00:23:26 pelle kernel: [    0.253546] system 00:01: ioport range 0x200-0x20f has been reserved
Sep  8 00:23:26 pelle kernel: [    0.253558] system 00:01: ioport range 0x600-0x60f has been reserved
Sep  8 00:23:26 pelle kernel: [    0.253568] system 00:01: ioport range 0x610-0x610 has been reserved
Sep  8 00:23:26 pelle kernel: [    0.253577] system 00:01: ioport range 0x800-0x80f has been reserved
Sep  8 00:23:26 pelle kernel: [    0.253587] system 00:01: ioport range 0x400-0x47f has been reserved
Sep  8 00:23:26 pelle kernel: [    0.253597] system 00:01: ioport range 0x500-0x53f has been reserved
Sep  8 00:23:26 pelle kernel: [    0.253609] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Sep  8 00:23:26 pelle kernel: [    0.253620] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Sep  8 00:23:26 pelle kernel: [    0.253630] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Sep  8 00:23:26 pelle kernel: [    0.253640] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Sep  8 00:23:26 pelle kernel: [    0.253651] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Sep  8 00:23:26 pelle kernel: [    0.253661] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Sep  8 00:23:26 pelle kernel: [    0.253672] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Sep  8 00:23:26 pelle kernel: [    0.288861] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
Sep  8 00:23:26 pelle kernel: [    0.288949] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Sep  8 00:23:26 pelle kernel: [    0.288960] pci 0000:00:1c.0:   IO window: 0x5000-0x5fff
Sep  8 00:23:26 pelle kernel: [    0.288973] pci 0000:00:1c.0:   MEM window: 0x57300000-0x583fffff
Sep  8 00:23:26 pelle kernel: [    0.288985] pci 0000:00:1c.0:   PREFETCH window: 0x00000050000000-0x00000050ffffff
Sep  8 00:23:26 pelle kernel: [    0.289006] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Sep  8 00:23:26 pelle kernel: [    0.289016] pci 0000:00:1c.1:   IO window: 0x3000-0x4fff
Sep  8 00:23:26 pelle kernel: [    0.289028] pci 0000:00:1c.1:   MEM window: 0x56300000-0x572fffff
Sep  8 00:23:26 pelle kernel: [    0.289039] pci 0000:00:1c.1:   PREFETCH window: 0x00000051000000-0x000000520fffff
Sep  8 00:23:26 pelle kernel: [    0.289055] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
Sep  8 00:23:26 pelle kernel: [    0.289064] pci 0000:00:1c.2:   IO window: 0x2000-0x2fff
Sep  8 00:23:26 pelle kernel: [    0.289077] pci 0000:00:1c.2:   MEM window: 0x55200000-0x562fffff
Sep  8 00:23:26 pelle kernel: [    0.289088] pci 0000:00:1c.2:   PREFETCH window: 0x00000052100000-0x000000530fffff
Sep  8 00:23:26 pelle kernel: [    0.289103] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
Sep  8 00:23:26 pelle kernel: [    0.289113] pci 0000:00:1c.3:   IO window: 0x1000-0x1fff
Sep  8 00:23:26 pelle kernel: [    0.289125] pci 0000:00:1c.3:   MEM window: 0x54100000-0x551fffff
Sep  8 00:23:26 pelle kernel: [    0.289137] pci 0000:00:1c.3:   PREFETCH window: 0x00000053100000-0x000000540fffff
Sep  8 00:23:26 pelle kernel: [    0.289152] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
Sep  8 00:23:26 pelle kernel: [    0.289158] pci 0000:00:1e.0:   IO window: disabled
Sep  8 00:23:26 pelle kernel: [    0.289169] pci 0000:00:1e.0:   MEM window: disabled
Sep  8 00:23:26 pelle kernel: [    0.289179] pci 0000:00:1e.0:   PREFETCH window: disabled
Sep  8 00:23:26 pelle kernel: [    0.289216]   alloc irq_desc for 16 on node -1
Sep  8 00:23:26 pelle kernel: [    0.289224]   alloc kstat_irqs on node -1
Sep  8 00:23:26 pelle kernel: [    0.289243] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:23:26 pelle kernel: [    0.289257] pci 0000:00:1c.0: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.289278]   alloc irq_desc for 17 on node -1
Sep  8 00:23:26 pelle kernel: [    0.289284]   alloc kstat_irqs on node -1
Sep  8 00:23:26 pelle kernel: [    0.289296] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:23:26 pelle kernel: [    0.289308] pci 0000:00:1c.1: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.289327]   alloc irq_desc for 18 on node -1
Sep  8 00:23:26 pelle kernel: [    0.289333]   alloc kstat_irqs on node -1
Sep  8 00:23:26 pelle kernel: [    0.289344] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:23:26 pelle kernel: [    0.289356] pci 0000:00:1c.2: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.289375]   alloc irq_desc for 19 on node -1
Sep  8 00:23:26 pelle kernel: [    0.289381]   alloc kstat_irqs on node -1
Sep  8 00:23:26 pelle kernel: [    0.289392] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:23:26 pelle kernel: [    0.289403] pci 0000:00:1c.3: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.289420] pci 0000:00:1e.0: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.289431] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Sep  8 00:23:26 pelle kernel: [    0.289440] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Sep  8 00:23:26 pelle kernel: [    0.289449] pci_bus 0000:01: resource 0 io:  [0x5000-0x5fff]
Sep  8 00:23:26 pelle kernel: [    0.289457] pci_bus 0000:01: resource 1 mem: [0x57300000-0x583fffff]
Sep  8 00:23:26 pelle kernel: [    0.289466] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
Sep  8 00:23:26 pelle kernel: [    0.289475] pci_bus 0000:02: resource 0 io:  [0x3000-0x4fff]
Sep  8 00:23:26 pelle kernel: [    0.289483] pci_bus 0000:02: resource 1 mem: [0x56300000-0x572fffff]
Sep  8 00:23:26 pelle kernel: [    0.289491] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x520fffff]
Sep  8 00:23:26 pelle kernel: [    0.289500] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
Sep  8 00:23:26 pelle kernel: [    0.289509] pci_bus 0000:03: resource 1 mem: [0x55200000-0x562fffff]
Sep  8 00:23:26 pelle kernel: [    0.289518] pci_bus 0000:03: resource 2 pref mem [0x52100000-0x530fffff]
Sep  8 00:23:26 pelle kernel: [    0.289527] pci_bus 0000:04: resource 0 io:  [0x1000-0x1fff]
Sep  8 00:23:26 pelle kernel: [    0.289535] pci_bus 0000:04: resource 1 mem: [0x54100000-0x551fffff]
Sep  8 00:23:26 pelle kernel: [    0.289543] pci_bus 0000:04: resource 2 pref mem [0x53100000-0x540fffff]
Sep  8 00:23:26 pelle kernel: [    0.289552] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
Sep  8 00:23:26 pelle kernel: [    0.289561] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
Sep  8 00:23:26 pelle kernel: [    0.289666] NET: Registered protocol family 2
Sep  8 00:23:26 pelle kernel: [    0.289952] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep  8 00:23:26 pelle kernel: [    0.290950] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep  8 00:23:26 pelle kernel: [    0.292167] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep  8 00:23:26 pelle kernel: [    0.292725] TCP: Hash tables configured (established 131072 bind 65536)
Sep  8 00:23:26 pelle kernel: [    0.292734] TCP reno registered
Sep  8 00:23:26 pelle kernel: [    0.293061] NET: Registered protocol family 1
Sep  8 00:23:26 pelle kernel: [    0.293120] pci 0000:00:02.0: Boot video device
Sep  8 00:23:26 pelle kernel: [    0.293450] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Sep  8 00:23:26 pelle kernel: [    0.293458] Simple Boot Flag at 0x44 set to 0x1
Sep  8 00:23:26 pelle kernel: [    0.293984] cpufreq-nforce2: No nForce2 chipset.
Sep  8 00:23:26 pelle kernel: [    0.294067] Scanning for low memory corruption every 60 seconds
Sep  8 00:23:26 pelle kernel: [    0.294430] audit: initializing netlink socket (disabled)
Sep  8 00:23:26 pelle kernel: [    0.294459] type=2000 audit(1283894594.294:1): initialized
Sep  8 00:23:26 pelle kernel: [    0.316081] highmem bounce pool size: 64 pages
Sep  8 00:23:26 pelle kernel: [    0.316099] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Sep  8 00:23:26 pelle kernel: [    0.321461] VFS: Disk quotas dquot_6.5.2
Sep  8 00:23:26 pelle kernel: [    0.321660] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep  8 00:23:26 pelle kernel: [    0.323772] fuse init (API version 7.13)
Sep  8 00:23:26 pelle kernel: [    0.324088] msgmni has been set to 1714
Sep  8 00:23:26 pelle kernel: [    0.324800] alg: No test for stdrng (krng)
Sep  8 00:23:26 pelle kernel: [    0.325012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep  8 00:23:26 pelle kernel: [    0.325022] io scheduler noop registered
Sep  8 00:23:26 pelle kernel: [    0.325028] io scheduler anticipatory registered
Sep  8 00:23:26 pelle kernel: [    0.325034] io scheduler deadline registered
Sep  8 00:23:26 pelle kernel: [    0.325174] io scheduler cfq registered (default)
Sep  8 00:23:26 pelle kernel: [    0.325535]   alloc irq_desc for 24 on node -1
Sep  8 00:23:26 pelle kernel: [    0.325543]   alloc kstat_irqs on node -1
Sep  8 00:23:26 pelle kernel: [    0.325566] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
Sep  8 00:23:26 pelle kernel: [    0.325588] pcieport 0000:00:1c.0: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.325864]   alloc irq_desc for 25 on node -1
Sep  8 00:23:26 pelle kernel: [    0.325871]   alloc kstat_irqs on node -1
Sep  8 00:23:26 pelle kernel: [    0.325889] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
Sep  8 00:23:26 pelle kernel: [    0.325907] pcieport 0000:00:1c.1: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.326194]   alloc irq_desc for 26 on node -1
Sep  8 00:23:26 pelle kernel: [    0.326201]   alloc kstat_irqs on node -1
Sep  8 00:23:26 pelle kernel: [    0.326221] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
Sep  8 00:23:26 pelle kernel: [    0.326241] pcieport 0000:00:1c.2: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.326555]   alloc irq_desc for 27 on node -1
Sep  8 00:23:26 pelle kernel: [    0.326562]   alloc kstat_irqs on node -1
Sep  8 00:23:26 pelle kernel: [    0.326582] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
Sep  8 00:23:26 pelle kernel: [    0.326600] pcieport 0000:00:1c.3: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.326849] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  8 00:23:26 pelle kernel: [    0.327159] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.327183] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.327547] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.327566] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.327890] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.327909] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.328245] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.328264] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.328653] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.328672] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.329009] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.329030] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.329369] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.329388] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.329708] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.329727] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:23:26 pelle kernel: [    0.329850] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep  8 00:23:26 pelle kernel: [    0.330508] ACPI: AC Adapter [ACAD] (on-line)
Sep  8 00:23:26 pelle kernel: [    0.330789] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Sep  8 00:23:26 pelle kernel: [    0.330800] ACPI: Power Button [PWRB]
Sep  8 00:23:26 pelle kernel: [    0.330939] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Sep  8 00:23:26 pelle kernel: [    0.331338] ACPI: Lid Switch [LID0]
Sep  8 00:23:26 pelle kernel: [    0.331510] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Sep  8 00:23:26 pelle kernel: [    0.331520] ACPI: Sleep Button [SLPB]
Sep  8 00:23:26 pelle kernel: [    0.331696] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Sep  8 00:23:26 pelle kernel: [    0.331705] ACPI: Power Button [PWRF]
Sep  8 00:23:26 pelle kernel: [    0.333607] ACPI: SSDT 3f380c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
Sep  8 00:23:26 pelle kernel: [    0.334681] ACPI: SSDT 3f37fe10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
Sep  8 00:23:26 pelle kernel: [    0.335618] Marking TSC unstable due to TSC halts in idle
Sep  8 00:23:26 pelle kernel: [    0.335880] processor LNXCPU:00: registered as cooling_device0
Sep  8 00:23:26 pelle kernel: [    0.336929] ACPI: SSDT 3f380f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
Sep  8 00:23:26 pelle kernel: [    0.337895] ACPI: SSDT 3f37ef10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
Sep  8 00:23:26 pelle kernel: [    0.338632] Switching to clocksource hpet
Sep  8 00:23:26 pelle kernel: [    0.339182] processor LNXCPU:01: registered as cooling_device1
Sep  8 00:23:26 pelle kernel: [    0.348271] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Sep  8 00:23:26 pelle kernel: [    0.352524] brd: module loaded
Sep  8 00:23:26 pelle kernel: [    0.353232] ACPI: Battery Slot [BAT1] (battery absent)
Sep  8 00:23:26 pelle kernel: [    0.353267] isapnp: Scanning for PnP cards...
Sep  8 00:23:26 pelle kernel: [    0.403728] loop: module loaded
Sep  8 00:23:26 pelle kernel: [    0.404030] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Sep  8 00:23:26 pelle kernel: [    0.404311] ata_piix 0000:00:1f.2: version 2.13
Sep  8 00:23:26 pelle kernel: [    0.404351] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:23:26 pelle kernel: [    0.404364] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Sep  8 00:23:26 pelle kernel: [    0.404455] ata_piix 0000:00:1f.2: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.448224] scsi0 : ata_piix
Sep  8 00:23:26 pelle kernel: [    0.492403] scsi1 : ata_piix
Sep  8 00:23:26 pelle kernel: [    0.495032] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
Sep  8 00:23:26 pelle kernel: [    0.495042] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
Sep  8 00:23:26 pelle kernel: [    0.496209] Fixed MDIO Bus: probed
Sep  8 00:23:26 pelle kernel: [    0.496323] PPP generic driver version 2.4.2
Sep  8 00:23:26 pelle kernel: [    0.496467] tun: Universal TUN/TAP device driver, 1.6
Sep  8 00:23:26 pelle kernel: [    0.496473] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep  8 00:23:26 pelle kernel: [    0.496724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep  8 00:23:26 pelle kernel: [    0.496778] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:23:26 pelle kernel: [    0.496814] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.496823] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep  8 00:23:26 pelle kernel: [    0.496921] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep  8 00:23:26 pelle kernel: [    0.496966] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Sep  8 00:23:26 pelle kernel: [    0.496986] ehci_hcd 0000:00:1d.7: debug port 1
Sep  8 00:23:26 pelle kernel: [    0.500887] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Sep  8 00:23:26 pelle kernel: [    0.500930] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
Sep  8 00:23:26 pelle kernel: [    0.516187] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Sep  8 00:23:26 pelle kernel: [    0.516523] usb usb1: configuration #1 chosen from 1 choice
Sep  8 00:23:26 pelle kernel: [    0.516615] hub 1-0:1.0: USB hub found
Sep  8 00:23:26 pelle kernel: [    0.516639] hub 1-0:1.0: 8 ports detected
Sep  8 00:23:26 pelle kernel: [    0.516831] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep  8 00:23:26 pelle kernel: [    0.516883] uhci_hcd: USB Universal Host Controller Interface driver
Sep  8 00:23:26 pelle kernel: [    0.516974] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:23:26 pelle kernel: [    0.516993] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.517002] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep  8 00:23:26 pelle kernel: [    0.517119] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep  8 00:23:26 pelle kernel: [    0.517168] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
Sep  8 00:23:26 pelle kernel: [    0.517419] usb usb2: configuration #1 chosen from 1 choice
Sep  8 00:23:26 pelle kernel: [    0.517513] hub 2-0:1.0: USB hub found
Sep  8 00:23:26 pelle kernel: [    0.517533] hub 2-0:1.0: 2 ports detected
Sep  8 00:23:26 pelle kernel: [    0.517648] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:23:26 pelle kernel: [    0.517663] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.517672] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep  8 00:23:26 pelle kernel: [    0.517769] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep  8 00:23:26 pelle kernel: [    0.517829] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
Sep  8 00:23:26 pelle kernel: [    0.518088] usb usb3: configuration #1 chosen from 1 choice
Sep  8 00:23:26 pelle kernel: [    0.518185] hub 3-0:1.0: USB hub found
Sep  8 00:23:26 pelle kernel: [    0.518206] hub 3-0:1.0: 2 ports detected
Sep  8 00:23:26 pelle kernel: [    0.518322] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:23:26 pelle kernel: [    0.518338] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.518346] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep  8 00:23:26 pelle kernel: [    0.518453] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep  8 00:23:26 pelle kernel: [    0.518512] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
Sep  8 00:23:26 pelle kernel: [    0.518776] usb usb4: configuration #1 chosen from 1 choice
Sep  8 00:23:26 pelle kernel: [    0.518856] hub 4-0:1.0: USB hub found
Sep  8 00:23:26 pelle kernel: [    0.518875] hub 4-0:1.0: 2 ports detected
Sep  8 00:23:26 pelle kernel: [    0.518988] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:23:26 pelle kernel: [    0.519004] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    0.519012] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep  8 00:23:26 pelle kernel: [    0.519103] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep  8 00:23:26 pelle kernel: [    0.519161] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
Sep  8 00:23:26 pelle kernel: [    0.519409] usb usb5: configuration #1 chosen from 1 choice
Sep  8 00:23:26 pelle kernel: [    0.519488] hub 5-0:1.0: USB hub found
Sep  8 00:23:26 pelle kernel: [    0.519508] hub 5-0:1.0: 2 ports detected
Sep  8 00:23:26 pelle kernel: [    0.519750] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Sep  8 00:23:26 pelle kernel: [    0.523834] i8042.c: Warning: Keylock active.
Sep  8 00:23:26 pelle kernel: [    0.543703] i8042.c: Detected active multiplexing controller, rev 1.1.
Sep  8 00:23:26 pelle kernel: [    0.556832] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  8 00:23:26 pelle kernel: [    0.556862] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Sep  8 00:23:26 pelle kernel: [    0.556969] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Sep  8 00:23:26 pelle kernel: [    0.557056] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Sep  8 00:23:26 pelle kernel: [    0.557130] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Sep  8 00:23:26 pelle kernel: [    0.557525] mice: PS/2 mouse device common for all mice
Sep  8 00:23:26 pelle kernel: [    0.557969] rtc_cmos 00:03: RTC can wake from S4
Sep  8 00:23:26 pelle kernel: [    0.558086] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep  8 00:23:26 pelle kernel: [    0.558136] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Sep  8 00:23:26 pelle kernel: [    0.558472] device-mapper: uevent: version 1.0.3
Sep  8 00:23:26 pelle kernel: [    0.579969] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Sep  8 00:23:26 pelle kernel: [    0.581184] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Sep  8 00:23:26 pelle kernel: [    0.616801] device-mapper: multipath: version 1.1.0 loaded
Sep  8 00:23:26 pelle kernel: [    0.616812] device-mapper: multipath round-robin: version 1.0.0 loaded
Sep  8 00:23:26 pelle kernel: [    0.623614] EISA: Probing bus 0 at eisa.0
Sep  8 00:23:26 pelle kernel: [    0.623629] Cannot allocate resource for EISA slot 1
Sep  8 00:23:26 pelle kernel: [    0.623636] Cannot allocate resource for EISA slot 2
Sep  8 00:23:26 pelle kernel: [    0.623642] Cannot allocate resource for EISA slot 3
Sep  8 00:23:26 pelle kernel: [    0.623648] Cannot allocate resource for EISA slot 4
Sep  8 00:23:26 pelle kernel: [    0.623654] Cannot allocate resource for EISA slot 5
Sep  8 00:23:26 pelle kernel: [    0.623661] Cannot allocate resource for EISA slot 6
Sep  8 00:23:26 pelle kernel: [    0.623679] EISA: Detected 0 cards.
Sep  8 00:23:26 pelle kernel: [    0.666999] cpuidle: using governor ladder
Sep  8 00:23:26 pelle kernel: [    0.667343] cpuidle: using governor menu
Sep  8 00:23:26 pelle kernel: [    0.668660] TCP cubic registered
Sep  8 00:23:26 pelle kernel: [    0.669208] NET: Registered protocol family 10
Sep  8 00:23:26 pelle kernel: [    0.670501] lo: Disabled Privacy Extensions
Sep  8 00:23:26 pelle kernel: [    0.671432] NET: Registered protocol family 17
Sep  8 00:23:26 pelle kernel: [    0.672532] Using IPI No-Shortcut mode
Sep  8 00:23:26 pelle kernel: [    0.672797] PM: Resume from disk failed.
Sep  8 00:23:26 pelle kernel: [    0.672837] registered taskstats version 1
Sep  8 00:23:26 pelle kernel: [    0.673591]   Magic number: 10:594:398
Sep  8 00:23:26 pelle kernel: [    0.673748] rtc_cmos 00:03: setting system clock to 2010-09-07 21:23:15 UTC (1283894595)
Sep  8 00:23:26 pelle kernel: [    0.673758] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep  8 00:23:26 pelle kernel: [    0.673763] EDD information not available.
Sep  8 00:23:26 pelle kernel: [    0.694439] Freeing initrd memory: 7784k freed
Sep  8 00:23:26 pelle kernel: [    0.710422] isapnp: No Plug & Play device found
Sep  8 00:23:26 pelle kernel: [    0.711107] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
Sep  8 00:23:26 pelle kernel: [    0.711123] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep  8 00:23:26 pelle kernel: [    0.724873] ata1.00: configured for UDMA/133
Sep  8 00:23:26 pelle kernel: [    0.725281] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
Sep  8 00:23:26 pelle kernel: [    0.725629] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Sep  8 00:23:26 pelle kernel: [    0.725696] sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep  8 00:23:26 pelle kernel: [    0.725818] sd 0:0:0:0: [sda] Write Protect is off
Sep  8 00:23:26 pelle kernel: [    0.725827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  8 00:23:26 pelle kernel: [    0.725920] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  8 00:23:26 pelle kernel: [    0.726287]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Sep  8 00:23:26 pelle kernel: [    0.793981] sd 0:0:0:0: [sda] Attached SCSI disk
Sep  8 00:23:26 pelle kernel: [    0.794056] Freeing unused kernel memory: 660k freed
Sep  8 00:23:26 pelle kernel: [    0.794639] Write protecting the kernel text: 4680k
Sep  8 00:23:26 pelle kernel: [    0.794721] Write protecting the kernel read-only data: 1844k
Sep  8 00:23:26 pelle kernel: [    0.828208] usb 1-5: new high speed USB device using ehci_hcd and address 2
Sep  8 00:23:26 pelle kernel: [    0.834405] udev: starting version 151
Sep  8 00:23:26 pelle kernel: [    1.117010] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep  8 00:23:26 pelle kernel: [    1.117061] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:23:26 pelle kernel: [    1.117141] r8169 0000:02:00.0: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [    1.117222]   alloc irq_desc for 28 on node -1
Sep  8 00:23:26 pelle kernel: [    1.117230]   alloc kstat_irqs on node -1
Sep  8 00:23:26 pelle kernel: [    1.117260] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
Sep  8 00:23:26 pelle kernel: [    1.119273] eth0: RTL8102e at 0xf804e000, 00:23:8b:0a:17:9d, XID 04a00000 IRQ 28
Sep  8 00:23:26 pelle kernel: [    1.171908] usb 1-5: configuration #1 chosen from 1 choice
Sep  8 00:23:26 pelle kernel: [    1.633139] usb 4-2: new full speed USB device using uhci_hcd and address 2
Sep  8 00:23:26 pelle kernel: [    1.665673] EXT4-fs (sda1): mounted filesystem with ordered data mode
Sep  8 00:23:26 pelle kernel: [    1.797965] usb 4-2: configuration #1 chosen from 1 choice
Sep  8 00:23:26 pelle kernel: [    9.347786] udev: starting version 151
Sep  8 00:23:26 pelle kernel: [    9.369417] Adding 975864k swap on /dev/sda5.  Priority:-1 extents:1 across:975864k 
Sep  8 00:23:26 pelle kernel: [    9.499774] lp: driver loaded but no devices found
Sep  8 00:23:26 pelle kernel: [    9.738141] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Sep  8 00:23:26 pelle kernel: [    9.738305] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
Sep  8 00:23:26 pelle kernel: [    9.739796] intel_rng: FWH not detected
Sep  8 00:23:26 pelle kernel: [    9.885523] Linux agpgart interface v0.103
Sep  8 00:23:26 pelle kernel: [   10.064339] hso: /build/buildd/linux-2.6.32/drivers/net/usb/hso.c: 1.2 Option Wireless
Sep  8 00:23:26 pelle kernel: [   10.065685] hso0: Disabled Privacy Extensions
Sep  8 00:23:26 pelle kernel: [   10.094270] usbcore: registered new interface driver hso
Sep  8 00:23:26 pelle kernel: [   10.108427] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
Sep  8 00:23:26 pelle kernel: [   10.108713] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Sep  8 00:23:26 pelle kernel: [   10.111502] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Sep  8 00:23:26 pelle kernel: [   10.315136] type=1505 audit(1283894605.138:2):  operation="profile_load" pid=572 name="/sbin/dhclient3"
Sep  8 00:23:26 pelle kernel: [   10.315929] type=1505 audit(1283894605.138:3):  operation="profile_load" pid=572 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:23:26 pelle kernel: [   10.316386] type=1505 audit(1283894605.142:4):  operation="profile_load" pid=572 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:23:26 pelle kernel: [   10.376400] [drm] Initialized drm 1.1.0 20060810
Sep  8 00:23:26 pelle kernel: [   10.412400] acer-wmi: Acer Laptop ACPI-WMI Extras
Sep  8 00:23:26 pelle kernel: [   10.412413] acer-wmi: Blacklisted hardware detected - not loading
Sep  8 00:23:26 pelle kernel: [   10.419714] Linux video capture interface: v2.00
Sep  8 00:23:26 pelle kernel: [   10.554157] cfg80211: Calling CRDA to update world regulatory domain
Sep  8 00:23:26 pelle kernel: [   10.583265] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Sep  8 00:23:26 pelle kernel: [   10.591129] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
Sep  8 00:23:26 pelle kernel: [   10.591334] usbcore: registered new interface driver uvcvideo
Sep  8 00:23:26 pelle kernel: [   10.591345] USB Video Class driver (v0.1.0)
Sep  8 00:23:26 pelle kernel: [   10.599182] acerhdf: Acer Aspire One Fan driver, v.0.5.20
Sep  8 00:23:26 pelle kernel: [   10.599198] acerhdf: Fan control off, to enable do:
Sep  8 00:23:26 pelle kernel: [   10.599204] acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
Sep  8 00:23:26 pelle kernel: [   10.669943] cfg80211: World regulatory domain updated:
Sep  8 00:23:26 pelle kernel: [   10.669955] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep  8 00:23:26 pelle kernel: [   10.669966] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:23:26 pelle kernel: [   10.669975] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:23:26 pelle kernel: [   10.669984] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:23:26 pelle kernel: [   10.669993] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:23:26 pelle kernel: [   10.670002] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:23:26 pelle kernel: [   10.748927] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:23:26 pelle kernel: [   10.748944] i915 0000:00:02.0: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [   10.770867] mtrr: no more MTRRs available
Sep  8 00:23:26 pelle kernel: [   10.770879] [drm] MTRR allocation failed.  Graphics performance may suffer.
Sep  8 00:23:26 pelle kernel: [   10.777813] [drm] set up 7M of stolen space
Sep  8 00:23:26 pelle kernel: [   10.887447] [drm] initialized overlay support
Sep  8 00:23:26 pelle kernel: [   11.230665] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
Sep  8 00:23:26 pelle kernel: [   11.286831] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Sep  8 00:23:26 pelle kernel: [   11.310555] fb0: inteldrmfb frame buffer device
Sep  8 00:23:26 pelle kernel: [   11.310564] registered panic notifier
Sep  8 00:23:26 pelle kernel: [   11.310584] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep  8 00:23:26 pelle kernel: [   11.310692] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:23:26 pelle kernel: [   11.310766] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [   11.319534] vga16fb: initializing
Sep  8 00:23:26 pelle kernel: [   11.319547] vga16fb: mapped to 0xc00a0000
Sep  8 00:23:26 pelle kernel: [   11.319558] vga16fb: not registering due to another framebuffer present
Sep  8 00:23:26 pelle kernel: [   11.512119] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Sep  8 00:23:26 pelle kernel: [   11.660831] Console: switching to colour frame buffer device 128x37
Sep  8 00:23:26 pelle kernel: [   11.859725] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:23:26 pelle kernel: [   11.859870] ath5k 0000:03:00.0: setting latency timer to 64
Sep  8 00:23:26 pelle kernel: [   11.860418] ath5k 0000:03:00.0: registered as 'phy0'
Sep  8 00:23:27 pelle kernel: [   12.361129] ath: EEPROM regdomain: 0x65
Sep  8 00:23:27 pelle kernel: [   12.361139] ath: EEPROM indicates we should expect a direct regpair map
Sep  8 00:23:27 pelle kernel: [   12.361150] ath: Country alpha2 being used: 00
Sep  8 00:23:27 pelle kernel: [   12.361157] ath: Regpair used: 0x65
Sep  8 00:23:27 pelle NetworkManager: <info>  starting...
Sep  8 00:23:27 pelle NetworkManager: <info>  Trying to start the modem-manager...
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: init!
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Sep  8 00:23:27 pelle NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0)
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0)
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0): no ifupdown configuration found.
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: end _init.
Sep  8 00:23:27 pelle NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:23:27 pelle NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:23:27 pelle NetworkManager: <info>  Found wlan radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill1) (driver <unknown>)
Sep  8 00:23:27 pelle kernel: [   12.522401] phy0: Selected rate control algorithm 'minstrel'
Sep  8 00:23:27 pelle kernel: [   12.524986] Registered led device: ath5k-phy0::rx
Sep  8 00:23:27 pelle kernel: [   12.525049] Registered led device: ath5k-phy0::tx
Sep  8 00:23:27 pelle kernel: [   12.525059] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Sep  8 00:23:27 pelle modem-manager: Loaded plugin MotoC
Sep  8 00:23:27 pelle NetworkManager: <info>  Found wwan radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/rfkill/rfkill0) (driver usb)
Sep  8 00:23:27 pelle modem-manager: Loaded plugin Gobi
Sep  8 00:23:27 pelle modem-manager: Loaded plugin Huawei
Sep  8 00:23:27 pelle modem-manager: Loaded plugin Nokia
Sep  8 00:23:27 pelle modem-manager: Loaded plugin ZTE
Sep  8 00:23:27 pelle NetworkManager: <info>  WiFi enabled by radio killswitch; disabled by state file
Sep  8 00:23:27 pelle NetworkManager: <info>  WWAN enabled by radio killswitch; disabled by state file
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: (166064368) ... get_connections.
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: (166064368) ... get_connections (managed=false): return empty list.
Sep  8 00:23:27 pelle kernel: [   12.574097] type=1505 audit(1283894607.398:5):  operation="profile_load" pid=775 name="/usr/share/gdm/guest-session/Xsession"
Sep  8 00:23:27 pelle modem-manager: Loaded plugin Option
Sep  8 00:23:27 pelle modem-manager: Loaded plugin Sierra
Sep  8 00:23:27 pelle modem-manager: Loaded plugin Novatel
Sep  8 00:23:27 pelle modem-manager: Loaded plugin Ericsson MBM
Sep  8 00:23:27 pelle modem-manager: Loaded plugin Generic
Sep  8 00:23:27 pelle kernel: [   12.595283] type=1505 audit(1283894607.418:6):  operation="profile_replace" pid=776 name="/sbin/dhclient3"
Sep  8 00:23:27 pelle modem-manager: Loaded plugin Option High-Speed
Sep  8 00:23:27 pelle modem-manager: Loaded plugin AnyData
Sep  8 00:23:27 pelle kernel: [   12.596265] type=1505 audit(1283894607.422:7):  operation="profile_replace" pid=776 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:23:27 pelle kernel: [   12.596739] type=1505 audit(1283894607.422:8):  operation="profile_replace" pid=776 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:23:27 pelle modem-manager: Loaded plugin Longcheer
Sep  8 00:23:27 pelle NetworkManager:    Ifupdown: get unmanaged devices count: 0
Sep  8 00:23:27 pelle NetworkManager: <info>  (eth0): carrier is OFF
Sep  8 00:23:27 pelle NetworkManager: <info>  (eth0): new Ethernet device (driver: 'r8169')
Sep  8 00:23:27 pelle NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep  8 00:23:27 pelle NetworkManager: <info>  (eth0): now managed
Sep  8 00:23:27 pelle NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Sep  8 00:23:27 pelle NetworkManager: <info>  (eth0): bringing up device.
Sep  8 00:23:27 pelle kernel: [   12.627931] type=1505 audit(1283894607.450:9):  operation="profile_load" pid=779 name="/usr/bin/evince"
Sep  8 00:23:27 pelle kernel: [   12.631075] r8169: eth0: link down
Sep  8 00:23:27 pelle NetworkManager: <info>  (eth0): preparing device.
Sep  8 00:23:27 pelle NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Sep  8 00:23:27 pelle kernel: [   12.638543] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep  8 00:23:27 pelle NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0
Sep  8 00:23:27 pelle NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
Sep  8 00:23:27 pelle kernel: [   12.642598] type=1505 audit(1283894607.466:10):  operation="profile_load" pid=779 name="/usr/bin/evince-previewer"
Sep  8 00:23:27 pelle kernel: [   12.649927] type=1505 audit(1283894607.474:11):  operation="profile_load" pid=779 name="/usr/bin/evince-thumbnailer"
Sep  8 00:23:27 pelle NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'ath5k')
Sep  8 00:23:27 pelle NetworkManager: <info>  (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep  8 00:23:27 pelle NetworkManager: <info>  (wlan0): now managed
Sep  8 00:23:27 pelle NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Sep  8 00:23:27 pelle NetworkManager: <info>  (wlan0): bringing up device.
Sep  8 00:23:27 pelle modem-manager: (ttyHS0) opening serial device...
Sep  8 00:23:27 pelle modem-manager: (ttyHS0): probe requested by plugin 'Option High-Speed'
Sep  8 00:23:27 pelle modem-manager: (ttyHS1) opening serial device...
Sep  8 00:23:27 pelle modem-manager: (ttyHS1): probe requested by plugin 'Option High-Speed'
Sep  8 00:23:27 pelle modem-manager: (ttyHS2) opening serial device...
Sep  8 00:23:27 pelle modem-manager: (ttyHS2): probe requested by plugin 'Option High-Speed'
Sep  8 00:23:27 pelle modem-manager: (ttyHS3) opening serial device...
Sep  8 00:23:27 pelle modem-manager: (ttyHS3): probe requested by plugin 'Option High-Speed'
Sep  8 00:23:27 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port hso0
Sep  8 00:23:27 pelle modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2
Sep  8 00:23:27 pelle kernel: [   12.834124] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep  8 00:23:27 pelle NetworkManager: <info>  (wlan0): preparing device.
Sep  8 00:23:27 pelle NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Sep  8 00:23:27 pelle NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0)
Sep  8 00:23:27 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Sep  8 00:23:27 pelle NetworkManager: <info>  WiFi now disabled by radio killswitch
Sep  8 00:23:27 pelle NetworkManager: <info>  modem-manager is now available
Sep  8 00:23:27 pelle NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Sep  8 00:23:27 pelle NetworkManager: <info>  Trying to start the supplicant...
Sep  8 00:23:27 pelle NetworkManager: <info>  (wlan0): supplicant manager state:  down -> idle
Sep  8 00:23:28 pelle kernel: [   13.873732] ppdev: user-space parallel port driver
Sep  8 00:23:29 pelle kernel: [   14.286396] CPU0 attaching NULL sched-domain.
Sep  8 00:23:29 pelle kernel: [   14.286408] CPU1 attaching NULL sched-domain.
Sep  8 00:23:29 pelle kernel: [   14.313280] CPU0 attaching sched-domain:
Sep  8 00:23:29 pelle kernel: [   14.313295]  domain 0: span 0-1 level SIBLING
Sep  8 00:23:29 pelle kernel: [   14.313308]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:23:29 pelle kernel: [   14.313334]   domain 1: span 0-1 level MC
Sep  8 00:23:29 pelle kernel: [   14.313345]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:23:29 pelle kernel: [   14.313366] CPU1 attaching sched-domain:
Sep  8 00:23:29 pelle kernel: [   14.313376]  domain 0: span 0-1 level SIBLING
Sep  8 00:23:29 pelle kernel: [   14.313386]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:23:29 pelle kernel: [   14.313409]   domain 1: span 0-1 level MC
Sep  8 00:23:29 pelle kernel: [   14.313420]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:23:30 pelle modem-manager: (ttyHS0) closing serial device...
Sep  8 00:23:30 pelle modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 as /org/freedesktop/ModemManager/Modems/0
Sep  8 00:23:30 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS0
Sep  8 00:23:30 pelle modem-manager: (ttyHS1) closing serial device...
Sep  8 00:23:30 pelle modem-manager: (ttyHS3) closing serial device...
Sep  8 00:23:30 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS1
Sep  8 00:23:30 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS3
Sep  8 00:23:30 pelle NetworkManager: <info>  (hso0): new GSM device (driver: 'hso')
Sep  8 00:23:30 pelle NetworkManager: <info>  (hso0): exported as /org/freedesktop/NetworkManager/Devices/2
Sep  8 00:23:30 pelle NetworkManager: <info>  (hso0): now managed
Sep  8 00:23:30 pelle NetworkManager: <info>  (hso0): device state change: 1 -> 2 (reason 2)
Sep  8 00:23:30 pelle NetworkManager: <info>  (hso0): deactivating device (reason: 2).
Sep  8 00:23:30 pelle NetworkManager: <info>  (hso0): device state change: 2 -> 3 (reason 0)
Sep  8 00:23:41 pelle modem-manager: (ttyHS2) closing serial device...
Sep  8 00:24:59 pelle kernel: Kernel logging (proc) stopped.
Sep  8 00:25:43 pelle kernel: imklog 4.2.0, log source = /proc/kmsg started.
Sep  8 00:25:43 pelle kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep  8 00:25:43 pelle kernel: [    0.000000] Initializing cgroup subsys cpu
Sep  8 00:25:43 pelle kernel: [    0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
Sep  8 00:25:43 pelle kernel: [    0.000000] KERNEL supported cpus:
Sep  8 00:25:43 pelle kernel: [    0.000000]   Intel GenuineIntel
Sep  8 00:25:43 pelle kernel: [    0.000000]   AMD AuthenticAMD
Sep  8 00:25:43 pelle kernel: [    0.000000]   NSC Geode by NSC
Sep  8 00:25:43 pelle kernel: [    0.000000]   Cyrix CyrixInstead
Sep  8 00:25:43 pelle kernel: [    0.000000]   Centaur CentaurHauls
Sep  8 00:25:43 pelle kernel: [    0.000000]   Transmeta GenuineTMx86
Sep  8 00:25:43 pelle kernel: [    0.000000]   Transmeta TransmetaCPU
Sep  8 00:25:43 pelle kernel: [    0.000000]   UMC UMC UMC UMC
Sep  8 00:25:43 pelle kernel: [    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:25:43 pelle kernel: [    0.000000] BIOS-provided physical RAM map:
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000] DMI 2.4 present.
Sep  8 00:25:43 pelle kernel: [    0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
Sep  8 00:25:43 pelle kernel: [    0.000000] MTRR default type: uncachable
Sep  8 00:25:43 pelle kernel: [    0.000000] MTRR fixed ranges enabled:
Sep  8 00:25:43 pelle kernel: [    0.000000]   00000-9FFFF write-back
Sep  8 00:25:43 pelle kernel: [    0.000000]   A0000-BFFFF uncachable
Sep  8 00:25:43 pelle kernel: [    0.000000]   C0000-C7FFF write-protect
Sep  8 00:25:43 pelle kernel: [    0.000000]   C8000-EFFFF uncachable
Sep  8 00:25:43 pelle kernel: [    0.000000]   F0000-FFFFF write-protect
Sep  8 00:25:43 pelle kernel: [    0.000000] MTRR variable ranges enabled:
Sep  8 00:25:43 pelle kernel: [    0.000000]   0 base 0FFFE0000 mask 0FFFE0000 write-protect
Sep  8 00:25:43 pelle kernel: [    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
Sep  8 00:25:43 pelle kernel: [    0.000000]   2 base 000000000 mask 0E0000000 write-back
Sep  8 00:25:43 pelle kernel: [    0.000000]   3 base 020000000 mask 0E0000000 write-back
Sep  8 00:25:43 pelle kernel: [    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
Sep  8 00:25:43 pelle kernel: [    0.000000]   5 base 03F600000 mask 0FFE00000 uncachable
Sep  8 00:25:43 pelle kernel: [    0.000000]   6 base 03F500000 mask 0FFF00000 uncachable
Sep  8 00:25:43 pelle kernel: [    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
Sep  8 00:25:43 pelle kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep  8 00:25:43 pelle kernel: [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000] Scanning 1 areas for low memory corruption
Sep  8 00:25:43 pelle kernel: [    0.000000] modified physical RAM map:
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 0000000000100000 - 000000003f376000 (usable)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 00:25:43 pelle kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Sep  8 00:25:43 pelle kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Sep  8 00:25:43 pelle kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Sep  8 00:25:43 pelle kernel: [    0.000000]  0000000000 - 00377fe000 page 4k
Sep  8 00:25:43 pelle kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 8e2000-9c3000
Sep  8 00:25:43 pelle kernel: [    0.000000] RAMDISK: 2ef3e000 - 2f6d8324
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: RSDP 000fe020 00024 (v02 INTEL )
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: XSDT 3f4fe120 00064 (v01 INTEL  Napa     00000001      01000013)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: FACP 3f4fc000 000F4 (v04 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: DSDT 3f4f2000 05DE4 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: FACS 3f488000 00040
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: SSDT 3f4fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: HPET 3f4fb000 00038 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: APIC 3f4fa000 00068 (v02 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: MCFG 3f4f9000 0003C (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: SLIC 3f4f1000 00180 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: BOOT 3f4f0000 00028 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:25:43 pelle kernel: [    0.000000] 125MB HIGHMEM available.
Sep  8 00:25:43 pelle kernel: [    0.000000] 887MB LOWMEM available.
Sep  8 00:25:43 pelle kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Sep  8 00:25:43 pelle kernel: [    0.000000]   low ram: 0 - 377fe000
Sep  8 00:25:43 pelle kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Sep  8 00:25:43 pelle kernel: [    0.000000]   node 0 bootmap 00007000 - 0000df00
Sep  8 00:25:43 pelle kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Sep  8 00:25:43 pelle kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Sep  8 00:25:43 pelle kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Sep  8 00:25:43 pelle kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Sep  8 00:25:43 pelle kernel: [    0.000000]   #3 [0000100000 - 00008ddeb8]    TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
Sep  8 00:25:43 pelle kernel: [    0.000000]   #4 [002ef3e000 - 002f6d8324]          RAMDISK ==> [002ef3e000 - 002f6d8324]
Sep  8 00:25:43 pelle kernel: [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Sep  8 00:25:43 pelle kernel: [    0.000000]   #6 [00008de000 - 00008e1244]              BRK ==> [00008de000 - 00008e1244]
Sep  8 00:25:43 pelle kernel: [    0.000000]   #7 [00008e2000 - 00009bd000]          PGTABLE ==> [00008e2000 - 00009bd000]
Sep  8 00:25:43 pelle kernel: [    0.000000]   #8 [0000007000 - 000000e000]          BOOTMAP ==> [0000007000 - 000000e000]
Sep  8 00:25:43 pelle kernel: [    0.000000] Zone PFN ranges:
Sep  8 00:25:43 pelle kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Sep  8 00:25:43 pelle kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Sep  8 00:25:43 pelle kernel: [    0.000000]   HighMem  0x000377fe -> 0x0003f500
Sep  8 00:25:43 pelle kernel: [    0.000000] Movable zone start PFN for each node
Sep  8 00:25:43 pelle kernel: [    0.000000] early_node_map[6] active PFN ranges
Sep  8 00:25:43 pelle kernel: [    0.000000]     0: 0x00000000 -> 0x00000002
Sep  8 00:25:43 pelle kernel: [    0.000000]     0: 0x00000006 -> 0x0000009f
Sep  8 00:25:43 pelle kernel: [    0.000000]     0: 0x00000100 -> 0x0003f376
Sep  8 00:25:43 pelle kernel: [    0.000000]     0: 0x0003f3bf -> 0x0003f46d
Sep  8 00:25:43 pelle kernel: [    0.000000]     0: 0x0003f4bf -> 0x0003f4f0
Sep  8 00:25:43 pelle kernel: [    0.000000]     0: 0x0003f4ff -> 0x0003f500
Sep  8 00:25:43 pelle kernel: [    0.000000] On node 0 totalpages: 259057
Sep  8 00:25:43 pelle kernel: [    0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000
Sep  8 00:25:43 pelle kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Sep  8 00:25:43 pelle kernel: [    0.000000]   DMA zone: 0 pages reserved
Sep  8 00:25:43 pelle kernel: [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
Sep  8 00:25:43 pelle kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Sep  8 00:25:43 pelle kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Sep  8 00:25:43 pelle kernel: [    0.000000]   HighMem zone: 251 pages used for memmap
Sep  8 00:25:43 pelle kernel: [    0.000000]   HighMem zone: 31581 pages, LIFO batch:7
Sep  8 00:25:43 pelle kernel: [    0.000000] Using APIC driver default
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Sep  8 00:25:43 pelle kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: IRQ2 used by override.
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep  8 00:25:43 pelle kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep  8 00:25:43 pelle kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep  8 00:25:43 pelle kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep  8 00:25:43 pelle kernel: [    0.000000] nr_irqs_gsi: 24
Sep  8 00:25:43 pelle kernel: [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Sep  8 00:25:43 pelle kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep  8 00:25:43 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Sep  8 00:25:43 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Sep  8 00:25:43 pelle kernel: [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Sep  8 00:25:43 pelle kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep  8 00:25:43 pelle kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Sep  8 00:25:43 pelle kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536
Sep  8 00:25:43 pelle kernel: [    0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
Sep  8 00:25:43 pelle kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 
Sep  8 00:25:43 pelle kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257030
Sep  8 00:25:43 pelle kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=05e65f51-4919-405f-ae5e-374a2ae344e8 ro quiet splash
Sep  8 00:25:43 pelle kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Sep  8 00:25:43 pelle kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep  8 00:25:43 pelle kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep  8 00:25:43 pelle kernel: [    0.000000] Enabling fast FPU save and restore... done.
Sep  8 00:25:43 pelle kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Sep  8 00:25:43 pelle kernel: [    0.000000] Initializing CPU#0
Sep  8 00:25:43 pelle kernel: [    0.000000] allocated 5186560 bytes of page_cgroup
Sep  8 00:25:43 pelle kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep  8 00:25:43 pelle kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
Sep  8 00:25:43 pelle kernel: [    0.000000] Memory: 1004836k/1037312k available (4679k kernel code, 30884k reserved, 2124k data, 660k init, 127328k highmem)
Sep  8 00:25:43 pelle kernel: [    0.000000] virtual kernel memory layout:
Sep  8 00:25:43 pelle kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Sep  8 00:25:43 pelle kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Sep  8 00:25:43 pelle kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Sep  8 00:25:43 pelle kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Sep  8 00:25:43 pelle kernel: [    0.000000]       .init : 0xc07a5000 - 0xc084a000   ( 660 kB)
Sep  8 00:25:43 pelle kernel: [    0.000000]       .data : 0xc0591e33 - 0xc07a4e88   (2124 kB)
Sep  8 00:25:43 pelle kernel: [    0.000000]       .text : 0xc0100000 - 0xc0591e33   (4679 kB)
Sep  8 00:25:43 pelle kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Sep  8 00:25:43 pelle kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep  8 00:25:43 pelle kernel: [    0.000000] Hierarchical RCU implementation.
Sep  8 00:25:43 pelle kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Sep  8 00:25:43 pelle kernel: [    0.000000] Console: colour VGA+ 80x25
Sep  8 00:25:43 pelle kernel: [    0.000000] console [tty0] enabled
Sep  8 00:25:43 pelle kernel: [    0.000000] hpet clockevent registered
Sep  8 00:25:43 pelle kernel: [    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Sep  8 00:25:43 pelle kernel: [    0.000000] Fast TSC calibration using PIT
Sep  8 00:25:43 pelle kernel: [    0.000000] Detected 1596.176 MHz processor.
Sep  8 00:25:43 pelle kernel: [    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.35 BogoMIPS (lpj=6384704)
Sep  8 00:25:43 pelle kernel: [    0.004049] Security Framework initialized
Sep  8 00:25:43 pelle kernel: [    0.004094] AppArmor: AppArmor initialized
Sep  8 00:25:43 pelle kernel: [    0.004111] Mount-cache hash table entries: 512
Sep  8 00:25:43 pelle kernel: [    0.004361] Initializing cgroup subsys ns
Sep  8 00:25:43 pelle kernel: [    0.004371] Initializing cgroup subsys cpuacct
Sep  8 00:25:43 pelle kernel: [    0.004382] Initializing cgroup subsys memory
Sep  8 00:25:43 pelle kernel: [    0.004396] Initializing cgroup subsys devices
Sep  8 00:25:43 pelle kernel: [    0.004402] Initializing cgroup subsys freezer
Sep  8 00:25:43 pelle kernel: [    0.004407] Initializing cgroup subsys net_cls
Sep  8 00:25:43 pelle kernel: [    0.004443] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:25:43 pelle kernel: [    0.004453] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:25:43 pelle kernel: [    0.004460] CPU: L2 cache: 512K
Sep  8 00:25:43 pelle kernel: [    0.004465] CPU: Physical Processor ID: 0
Sep  8 00:25:43 pelle kernel: [    0.004470] CPU: Processor Core ID: 0
Sep  8 00:25:43 pelle kernel: [    0.004478] mce: CPU supports 5 MCE banks
Sep  8 00:25:43 pelle kernel: [    0.004496] CPU0: Thermal monitoring enabled (TM1)
Sep  8 00:25:43 pelle kernel: [    0.004505] using mwait in idle threads.
Sep  8 00:25:43 pelle kernel: [    0.004517] Performance Events: Atom events, Intel PMU driver.
Sep  8 00:25:43 pelle kernel: [    0.004535] ... version:                3
Sep  8 00:25:43 pelle kernel: [    0.004539] ... bit width:              40
Sep  8 00:25:43 pelle kernel: [    0.004544] ... generic registers:      2
Sep  8 00:25:43 pelle kernel: [    0.004549] ... value mask:             000000ffffffffff
Sep  8 00:25:43 pelle kernel: [    0.004555] ... max period:             000000007fffffff
Sep  8 00:25:43 pelle kernel: [    0.004560] ... fixed-purpose events:   3
Sep  8 00:25:43 pelle kernel: [    0.004564] ... event mask:             0000000700000003
Sep  8 00:25:43 pelle kernel: [    0.004573] Checking 'hlt' instruction... OK.
Sep  8 00:25:43 pelle kernel: [    0.020010] Disabling 4MB page tables to avoid TLB bug
Sep  8 00:25:43 pelle kernel: [    0.024463] ACPI: Core revision 20090903
Sep  8 00:25:43 pelle kernel: [    0.040018] ftrace: converting mcount calls to 0f 1f 44 00 00
Sep  8 00:25:43 pelle kernel: [    0.040030] ftrace: allocating 21780 entries in 43 pages
Sep  8 00:25:43 pelle kernel: [    0.044110] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep  8 00:25:43 pelle kernel: [    0.044514] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep  8 00:25:43 pelle kernel: [    0.086275] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:25:43 pelle kernel: [    0.088001] Booting processor 1 APIC 0x1 ip 0x6000
Sep  8 00:25:43 pelle kernel: [    0.008000] Initializing CPU#1
Sep  8 00:25:43 pelle kernel: [    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 00:25:43 pelle kernel: [    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 00:25:43 pelle kernel: [    0.008000] CPU: L2 cache: 512K
Sep  8 00:25:43 pelle kernel: [    0.008000] CPU: Physical Processor ID: 0
Sep  8 00:25:43 pelle kernel: [    0.008000] CPU: Processor Core ID: 0
Sep  8 00:25:43 pelle kernel: [    0.008000] CPU1: Thermal monitoring enabled (TM1)
Sep  8 00:25:43 pelle kernel: [    0.172105] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 00:25:43 pelle kernel: [    0.172135] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep  8 00:25:43 pelle kernel: [    0.176038] Brought up 2 CPUs
Sep  8 00:25:43 pelle kernel: [    0.176046] Total of 2 processors activated (6384.28 BogoMIPS).
Sep  8 00:25:43 pelle kernel: [    0.176298] CPU0 attaching sched-domain:
Sep  8 00:25:43 pelle kernel: [    0.176307]  domain 0: span 0-1 level SIBLING
Sep  8 00:25:43 pelle kernel: [    0.176313]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:25:43 pelle kernel: [    0.176326]   domain 1: span 0-1 level MC
Sep  8 00:25:43 pelle kernel: [    0.176331]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:25:43 pelle kernel: [    0.176343] CPU1 attaching sched-domain:
Sep  8 00:25:43 pelle kernel: [    0.176348]  domain 0: span 0-1 level SIBLING
Sep  8 00:25:43 pelle kernel: [    0.176353]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:25:43 pelle kernel: [    0.176365]   domain 1: span 0-1 level MC
Sep  8 00:25:43 pelle kernel: [    0.176370]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:25:43 pelle kernel: [    0.176601] devtmpfs: initialized
Sep  8 00:25:43 pelle kernel: [    0.176601] regulator: core version 0.5
Sep  8 00:25:43 pelle kernel: [    0.176601] Time: 21:25:31  Date: 09/07/10
Sep  8 00:25:43 pelle kernel: [    0.176601] NET: Registered protocol family 16
Sep  8 00:25:43 pelle kernel: [    0.176601] Trying to unpack rootfs image as initramfs...
Sep  8 00:25:43 pelle kernel: [    0.176601] EISA bus registered
Sep  8 00:25:43 pelle kernel: [    0.176608] ACPI: bus type pci registered
Sep  8 00:25:43 pelle kernel: [    0.176784] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Sep  8 00:25:43 pelle kernel: [    0.176794] PCI: MCFG area at e0000000 reserved in E820
Sep  8 00:25:43 pelle kernel: [    0.176800] PCI: Using MMCONFIG for extended config space
Sep  8 00:25:43 pelle kernel: [    0.176806] PCI: Using configuration type 1 for base access
Sep  8 00:25:43 pelle kernel: [    0.181826] bio: create slab <bio-0> at 0
Sep  8 00:25:43 pelle kernel: [    0.184383] ACPI: EC: Look up EC in DSDT
Sep  8 00:25:43 pelle kernel: [    0.188651] ACPI: Executed 1 blocks of module-level executable AML code
Sep  8 00:25:43 pelle kernel: [    0.193037] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:25:43 pelle kernel: [    0.193311] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 00:25:43 pelle kernel: [    0.200441] ACPI: Interpreter enabled
Sep  8 00:25:43 pelle kernel: [    0.200460] ACPI: (supports S0 S3 S4 S5)
Sep  8 00:25:43 pelle kernel: [    0.200533] ACPI: Using IOAPIC for interrupt routing
Sep  8 00:25:43 pelle kernel: [    0.214477] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Sep  8 00:25:43 pelle kernel: [    0.215136] ACPI: No dock devices found.
Sep  8 00:25:43 pelle kernel: [    0.216942] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.216964] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.216987] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
Sep  8 00:25:43 pelle kernel: [    0.217054] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep  8 00:25:43 pelle kernel: [    0.217261] pci 0000:00:02.0: reg 10 32bit mmio: [0x58480000-0x584fffff]
Sep  8 00:25:43 pelle kernel: [    0.217274] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
Sep  8 00:25:43 pelle kernel: [    0.217286] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
Sep  8 00:25:43 pelle kernel: [    0.217299] pci 0000:00:02.0: reg 1c 32bit mmio: [0x58500000-0x5853ffff]
Sep  8 00:25:43 pelle kernel: [    0.217369] pci 0000:00:02.1: reg 10 32bit mmio: [0x58400000-0x5847ffff]
Sep  8 00:25:43 pelle kernel: [    0.217533] pci 0000:00:1b.0: reg 10 64bit mmio: [0x58540000-0x58543fff]
Sep  8 00:25:43 pelle kernel: [    0.217623] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep  8 00:25:43 pelle kernel: [    0.217635] pci 0000:00:1b.0: PME# disabled
Sep  8 00:25:43 pelle kernel: [    0.217768] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep  8 00:25:43 pelle kernel: [    0.217779] pci 0000:00:1c.0: PME# disabled
Sep  8 00:25:43 pelle kernel: [    0.217911] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep  8 00:25:43 pelle kernel: [    0.217921] pci 0000:00:1c.1: PME# disabled
Sep  8 00:25:43 pelle kernel: [    0.218053] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Sep  8 00:25:43 pelle kernel: [    0.218064] pci 0000:00:1c.2: PME# disabled
Sep  8 00:25:43 pelle kernel: [    0.218196] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Sep  8 00:25:43 pelle kernel: [    0.218207] pci 0000:00:1c.3: PME# disabled
Sep  8 00:25:43 pelle kernel: [    0.218301] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
Sep  8 00:25:43 pelle kernel: [    0.218405] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
Sep  8 00:25:43 pelle kernel: [    0.218506] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
Sep  8 00:25:43 pelle kernel: [    0.218600] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
Sep  8 00:25:43 pelle kernel: [    0.218698] pci 0000:00:1d.7: reg 10 32bit mmio: [0x58544400-0x585447ff]
Sep  8 00:25:43 pelle kernel: [    0.218782] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Sep  8 00:25:43 pelle kernel: [    0.218794] pci 0000:00:1d.7: PME# disabled
Sep  8 00:25:43 pelle kernel: [    0.219029] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Sep  8 00:25:43 pelle kernel: [    0.219041] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Sep  8 00:25:43 pelle kernel: [    0.219059] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
Sep  8 00:25:43 pelle kernel: [    0.219154] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
Sep  8 00:25:43 pelle kernel: [    0.219172] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
Sep  8 00:25:43 pelle kernel: [    0.219188] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
Sep  8 00:25:43 pelle kernel: [    0.219204] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
Sep  8 00:25:43 pelle kernel: [    0.219222] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
Sep  8 00:25:43 pelle kernel: [    0.219278] pci 0000:00:1f.2: PME# supported from D3hot
Sep  8 00:25:43 pelle kernel: [    0.219291] pci 0000:00:1f.2: PME# disabled
Sep  8 00:25:43 pelle kernel: [    0.219380] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
Sep  8 00:25:43 pelle kernel: [    0.219513] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
Sep  8 00:25:43 pelle kernel: [    0.219524] pci 0000:00:1c.0: bridge 32bit mmio: [0x57300000-0x583fffff]
Sep  8 00:25:43 pelle kernel: [    0.219540] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
Sep  8 00:25:43 pelle kernel: [    0.219630] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
Sep  8 00:25:43 pelle kernel: [    0.219667] pci 0000:02:00.0: reg 18 64bit mmio pref: [0x51010000-0x51010fff]
Sep  8 00:25:43 pelle kernel: [    0.219695] pci 0000:02:00.0: reg 20 64bit mmio pref: [0x51000000-0x5100ffff]
Sep  8 00:25:43 pelle kernel: [    0.219714] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
Sep  8 00:25:43 pelle kernel: [    0.219784] pci 0000:02:00.0: supports D1 D2
Sep  8 00:25:43 pelle kernel: [    0.219791] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep  8 00:25:43 pelle kernel: [    0.219803] pci 0000:02:00.0: PME# disabled
Sep  8 00:25:43 pelle kernel: [    0.219915] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
Sep  8 00:25:43 pelle kernel: [    0.219927] pci 0000:00:1c.1: bridge 32bit mmio: [0x56300000-0x572fffff]
Sep  8 00:25:43 pelle kernel: [    0.219942] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
Sep  8 00:25:43 pelle kernel: [    0.220142] pci 0000:03:00.0: reg 10 64bit mmio: [0x55200000-0x5520ffff]
Sep  8 00:25:43 pelle kernel: [    0.220444] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
Sep  8 00:25:43 pelle kernel: [    0.220456] pci 0000:00:1c.2: bridge 32bit mmio: [0x55200000-0x562fffff]
Sep  8 00:25:43 pelle kernel: [    0.220472] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52100000-0x530fffff]
Sep  8 00:25:43 pelle kernel: [    0.220559] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
Sep  8 00:25:43 pelle kernel: [    0.220571] pci 0000:00:1c.3: bridge 32bit mmio: [0x54100000-0x551fffff]
Sep  8 00:25:43 pelle kernel: [    0.220586] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53100000-0x540fffff]
Sep  8 00:25:43 pelle kernel: [    0.220674] pci 0000:00:1e.0: transparent bridge
Sep  8 00:25:43 pelle kernel: [    0.220734] pci_bus 0000:00: on NUMA node 0
Sep  8 00:25:43 pelle kernel: [    0.220757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep  8 00:25:43 pelle kernel: [    0.221273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
Sep  8 00:25:43 pelle kernel: [    0.221681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
Sep  8 00:25:43 pelle kernel: [    0.221982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
Sep  8 00:25:43 pelle kernel: [    0.222214] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
Sep  8 00:25:43 pelle kernel: [    0.222444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
Sep  8 00:25:43 pelle kernel: [    0.223019] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.223040] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.235629] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:25:43 pelle kernel: [    0.235944] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:25:43 pelle kernel: [    0.236309] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:25:43 pelle kernel: [    0.236613] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 00:25:43 pelle kernel: [    0.236916] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:25:43 pelle kernel: [    0.237241] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:25:43 pelle kernel: [    0.237545] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:25:43 pelle kernel: [    0.237854] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 00:25:43 pelle kernel: [    0.238229] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep  8 00:25:43 pelle kernel: [    0.238263] vgaarb: loaded
Sep  8 00:25:43 pelle kernel: [    0.238614] SCSI subsystem initialized
Sep  8 00:25:43 pelle kernel: [    0.238867] libata version 3.00 loaded.
Sep  8 00:25:43 pelle kernel: [    0.239115] usbcore: registered new interface driver usbfs
Sep  8 00:25:43 pelle kernel: [    0.239167] usbcore: registered new interface driver hub
Sep  8 00:25:43 pelle kernel: [    0.239269] usbcore: registered new device driver usb
Sep  8 00:25:43 pelle kernel: [    0.239950] ACPI: WMI: Mapper loaded
Sep  8 00:25:43 pelle kernel: [    0.239957] PCI: Using ACPI for IRQ routing
Sep  8 00:25:43 pelle kernel: [    0.240426] NetLabel: Initializing
Sep  8 00:25:43 pelle kernel: [    0.240434] NetLabel:  domain hash size = 128
Sep  8 00:25:43 pelle kernel: [    0.240439] NetLabel:  protocols = UNLABELED CIPSOv4
Sep  8 00:25:43 pelle kernel: [    0.240472] NetLabel:  unlabeled traffic allowed by default
Sep  8 00:25:43 pelle kernel: [    0.240590] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep  8 00:25:43 pelle kernel: [    0.240607] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Sep  8 00:25:43 pelle kernel: [    0.244437] Switching to clocksource tsc
Sep  8 00:25:43 pelle kernel: [    0.249026] AppArmor: AppArmor Filesystem Enabled
Sep  8 00:25:43 pelle kernel: [    0.249067] pnp: PnP ACPI init
Sep  8 00:25:43 pelle kernel: [    0.249108] ACPI: bus type pnp registered
Sep  8 00:25:43 pelle kernel: [    0.251798] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
Sep  8 00:25:43 pelle kernel: [    0.253506] pnp: PnP ACPI: found 9 devices
Sep  8 00:25:43 pelle kernel: [    0.253514] ACPI: ACPI bus type pnp unregistered
Sep  8 00:25:43 pelle kernel: [    0.253523] PnPBIOS: Disabled by ACPI PNP
Sep  8 00:25:43 pelle kernel: [    0.253556] system 00:01: ioport range 0x200-0x20f has been reserved
Sep  8 00:25:43 pelle kernel: [    0.253568] system 00:01: ioport range 0x600-0x60f has been reserved
Sep  8 00:25:43 pelle kernel: [    0.253577] system 00:01: ioport range 0x610-0x610 has been reserved
Sep  8 00:25:43 pelle kernel: [    0.253587] system 00:01: ioport range 0x800-0x80f has been reserved
Sep  8 00:25:43 pelle kernel: [    0.253596] system 00:01: ioport range 0x400-0x47f has been reserved
Sep  8 00:25:43 pelle kernel: [    0.253606] system 00:01: ioport range 0x500-0x53f has been reserved
Sep  8 00:25:43 pelle kernel: [    0.253619] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Sep  8 00:25:43 pelle kernel: [    0.253629] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Sep  8 00:25:43 pelle kernel: [    0.253639] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Sep  8 00:25:43 pelle kernel: [    0.253650] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Sep  8 00:25:43 pelle kernel: [    0.253660] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Sep  8 00:25:43 pelle kernel: [    0.253671] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Sep  8 00:25:43 pelle kernel: [    0.253681] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Sep  8 00:25:43 pelle kernel: [    0.288859] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
Sep  8 00:25:43 pelle kernel: [    0.288946] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Sep  8 00:25:43 pelle kernel: [    0.288956] pci 0000:00:1c.0:   IO window: 0x5000-0x5fff
Sep  8 00:25:43 pelle kernel: [    0.288969] pci 0000:00:1c.0:   MEM window: 0x57300000-0x583fffff
Sep  8 00:25:43 pelle kernel: [    0.288981] pci 0000:00:1c.0:   PREFETCH window: 0x00000050000000-0x00000050ffffff
Sep  8 00:25:43 pelle kernel: [    0.289001] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Sep  8 00:25:43 pelle kernel: [    0.289011] pci 0000:00:1c.1:   IO window: 0x3000-0x4fff
Sep  8 00:25:43 pelle kernel: [    0.289023] pci 0000:00:1c.1:   MEM window: 0x56300000-0x572fffff
Sep  8 00:25:43 pelle kernel: [    0.289035] pci 0000:00:1c.1:   PREFETCH window: 0x00000051000000-0x000000520fffff
Sep  8 00:25:43 pelle kernel: [    0.289051] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
Sep  8 00:25:43 pelle kernel: [    0.289060] pci 0000:00:1c.2:   IO window: 0x2000-0x2fff
Sep  8 00:25:43 pelle kernel: [    0.289073] pci 0000:00:1c.2:   MEM window: 0x55200000-0x562fffff
Sep  8 00:25:43 pelle kernel: [    0.289084] pci 0000:00:1c.2:   PREFETCH window: 0x00000052100000-0x000000530fffff
Sep  8 00:25:43 pelle kernel: [    0.289099] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
Sep  8 00:25:43 pelle kernel: [    0.289109] pci 0000:00:1c.3:   IO window: 0x1000-0x1fff
Sep  8 00:25:43 pelle kernel: [    0.289121] pci 0000:00:1c.3:   MEM window: 0x54100000-0x551fffff
Sep  8 00:25:43 pelle kernel: [    0.289132] pci 0000:00:1c.3:   PREFETCH window: 0x00000053100000-0x000000540fffff
Sep  8 00:25:43 pelle kernel: [    0.289148] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
Sep  8 00:25:43 pelle kernel: [    0.289154] pci 0000:00:1e.0:   IO window: disabled
Sep  8 00:25:43 pelle kernel: [    0.289165] pci 0000:00:1e.0:   MEM window: disabled
Sep  8 00:25:43 pelle kernel: [    0.289175] pci 0000:00:1e.0:   PREFETCH window: disabled
Sep  8 00:25:43 pelle kernel: [    0.289214]   alloc irq_desc for 16 on node -1
Sep  8 00:25:43 pelle kernel: [    0.289221]   alloc kstat_irqs on node -1
Sep  8 00:25:43 pelle kernel: [    0.289239] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:25:43 pelle kernel: [    0.289252] pci 0000:00:1c.0: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.289273]   alloc irq_desc for 17 on node -1
Sep  8 00:25:43 pelle kernel: [    0.289279]   alloc kstat_irqs on node -1
Sep  8 00:25:43 pelle kernel: [    0.289291] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:25:43 pelle kernel: [    0.289303] pci 0000:00:1c.1: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.289322]   alloc irq_desc for 18 on node -1
Sep  8 00:25:43 pelle kernel: [    0.289328]   alloc kstat_irqs on node -1
Sep  8 00:25:43 pelle kernel: [    0.289339] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:25:43 pelle kernel: [    0.289351] pci 0000:00:1c.2: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.289370]   alloc irq_desc for 19 on node -1
Sep  8 00:25:43 pelle kernel: [    0.289376]   alloc kstat_irqs on node -1
Sep  8 00:25:43 pelle kernel: [    0.289387] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:25:43 pelle kernel: [    0.289398] pci 0000:00:1c.3: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.289415] pci 0000:00:1e.0: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.289427] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Sep  8 00:25:43 pelle kernel: [    0.289435] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Sep  8 00:25:43 pelle kernel: [    0.289444] pci_bus 0000:01: resource 0 io:  [0x5000-0x5fff]
Sep  8 00:25:43 pelle kernel: [    0.289452] pci_bus 0000:01: resource 1 mem: [0x57300000-0x583fffff]
Sep  8 00:25:43 pelle kernel: [    0.289461] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
Sep  8 00:25:43 pelle kernel: [    0.289470] pci_bus 0000:02: resource 0 io:  [0x3000-0x4fff]
Sep  8 00:25:43 pelle kernel: [    0.289478] pci_bus 0000:02: resource 1 mem: [0x56300000-0x572fffff]
Sep  8 00:25:43 pelle kernel: [    0.289487] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x520fffff]
Sep  8 00:25:43 pelle kernel: [    0.289496] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
Sep  8 00:25:43 pelle kernel: [    0.289504] pci_bus 0000:03: resource 1 mem: [0x55200000-0x562fffff]
Sep  8 00:25:43 pelle kernel: [    0.289514] pci_bus 0000:03: resource 2 pref mem [0x52100000-0x530fffff]
Sep  8 00:25:43 pelle kernel: [    0.289523] pci_bus 0000:04: resource 0 io:  [0x1000-0x1fff]
Sep  8 00:25:43 pelle kernel: [    0.289530] pci_bus 0000:04: resource 1 mem: [0x54100000-0x551fffff]
Sep  8 00:25:43 pelle kernel: [    0.289539] pci_bus 0000:04: resource 2 pref mem [0x53100000-0x540fffff]
Sep  8 00:25:43 pelle kernel: [    0.289548] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
Sep  8 00:25:43 pelle kernel: [    0.289557] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
Sep  8 00:25:43 pelle kernel: [    0.289665] NET: Registered protocol family 2
Sep  8 00:25:43 pelle kernel: [    0.289945] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep  8 00:25:43 pelle kernel: [    0.290952] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep  8 00:25:43 pelle kernel: [    0.292173] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep  8 00:25:43 pelle kernel: [    0.292739] TCP: Hash tables configured (established 131072 bind 65536)
Sep  8 00:25:43 pelle kernel: [    0.292748] TCP reno registered
Sep  8 00:25:43 pelle kernel: [    0.293077] NET: Registered protocol family 1
Sep  8 00:25:43 pelle kernel: [    0.293137] pci 0000:00:02.0: Boot video device
Sep  8 00:25:43 pelle kernel: [    0.293465] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Sep  8 00:25:43 pelle kernel: [    0.293473] Simple Boot Flag at 0x44 set to 0x1
Sep  8 00:25:43 pelle kernel: [    0.293997] cpufreq-nforce2: No nForce2 chipset.
Sep  8 00:25:43 pelle kernel: [    0.294080] Scanning for low memory corruption every 60 seconds
Sep  8 00:25:43 pelle kernel: [    0.294419] audit: initializing netlink socket (disabled)
Sep  8 00:25:43 pelle kernel: [    0.294446] type=2000 audit(1283894730.290:1): initialized
Sep  8 00:25:43 pelle kernel: [    0.316104] highmem bounce pool size: 64 pages
Sep  8 00:25:43 pelle kernel: [    0.316122] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Sep  8 00:25:43 pelle kernel: [    0.321497] VFS: Disk quotas dquot_6.5.2
Sep  8 00:25:43 pelle kernel: [    0.321695] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep  8 00:25:43 pelle kernel: [    0.323810] fuse init (API version 7.13)
Sep  8 00:25:43 pelle kernel: [    0.324127] msgmni has been set to 1714
Sep  8 00:25:43 pelle kernel: [    0.324838] alg: No test for stdrng (krng)
Sep  8 00:25:43 pelle kernel: [    0.325047] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep  8 00:25:43 pelle kernel: [    0.325057] io scheduler noop registered
Sep  8 00:25:43 pelle kernel: [    0.325063] io scheduler anticipatory registered
Sep  8 00:25:43 pelle kernel: [    0.325069] io scheduler deadline registered
Sep  8 00:25:43 pelle kernel: [    0.325208] io scheduler cfq registered (default)
Sep  8 00:25:43 pelle kernel: [    0.325564]   alloc irq_desc for 24 on node -1
Sep  8 00:25:43 pelle kernel: [    0.325572]   alloc kstat_irqs on node -1
Sep  8 00:25:43 pelle kernel: [    0.325595] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
Sep  8 00:25:43 pelle kernel: [    0.325615] pcieport 0000:00:1c.0: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.325892]   alloc irq_desc for 25 on node -1
Sep  8 00:25:43 pelle kernel: [    0.325899]   alloc kstat_irqs on node -1
Sep  8 00:25:43 pelle kernel: [    0.325917] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
Sep  8 00:25:43 pelle NetworkManager: <info>  starting...
Sep  8 00:25:43 pelle kernel: [    0.325935] pcieport 0000:00:1c.1: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.326220]   alloc irq_desc for 26 on node -1
Sep  8 00:25:43 pelle kernel: [    0.326229]   alloc kstat_irqs on node -1
Sep  8 00:25:43 pelle kernel: [    0.326250] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
Sep  8 00:25:43 pelle kernel: [    0.326270] pcieport 0000:00:1c.2: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.326583]   alloc irq_desc for 27 on node -1
Sep  8 00:25:43 pelle kernel: [    0.326590]   alloc kstat_irqs on node -1
Sep  8 00:25:43 pelle kernel: [    0.326609] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
Sep  8 00:25:43 pelle kernel: [    0.326627] pcieport 0000:00:1c.3: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.326878] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  8 00:25:43 pelle kernel: [    0.327194] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.327217] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.327575] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.327595] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.327915] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.327934] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.328264] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.328283] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.328666] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.328685] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.329025] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.329048] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.329381] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.329400] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.329720] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.329739] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 00:25:43 pelle kernel: [    0.329864] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep  8 00:25:43 pelle kernel: [    0.330665] ACPI: AC Adapter [ACAD] (on-line)
Sep  8 00:25:43 pelle kernel: [    0.330942] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Sep  8 00:25:43 pelle kernel: [    0.330953] ACPI: Power Button [PWRB]
Sep  8 00:25:43 pelle kernel: [    0.331089] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Sep  8 00:25:43 pelle kernel: [    0.332002] ACPI: Lid Switch [LID0]
Sep  8 00:25:43 pelle kernel: [    0.332184] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Sep  8 00:25:43 pelle kernel: [    0.332195] ACPI: Sleep Button [SLPB]
Sep  8 00:25:43 pelle kernel: [    0.332385] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Sep  8 00:25:43 pelle kernel: [    0.332395] ACPI: Power Button [PWRF]
Sep  8 00:25:43 pelle kernel: [    0.334283] ACPI: SSDT 3f380c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
Sep  8 00:25:43 pelle kernel: [    0.335389] ACPI: SSDT 3f37fe10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
Sep  8 00:25:43 pelle kernel: [    0.336315] Marking TSC unstable due to TSC halts in idle
Sep  8 00:25:43 pelle kernel: [    0.336578] processor LNXCPU:00: registered as cooling_device0
Sep  8 00:25:43 pelle kernel: [    0.337645] ACPI: SSDT 3f380f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
Sep  8 00:25:43 pelle kernel: [    0.338595] ACPI: SSDT 3f37ef10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
Sep  8 00:25:43 pelle kernel: [    0.339324] Switching to clocksource hpet
Sep  8 00:25:43 pelle kernel: [    0.339836] processor LNXCPU:01: registered as cooling_device1
Sep  8 00:25:43 pelle kernel: [    0.348935] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Sep  8 00:25:43 pelle kernel: [    0.353228] brd: module loaded
Sep  8 00:25:43 pelle kernel: [    0.354925] loop: module loaded
Sep  8 00:25:43 pelle kernel: [    0.355229] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Sep  8 00:25:43 pelle kernel: [    0.355510] ata_piix 0000:00:1f.2: version 2.13
Sep  8 00:25:43 pelle kernel: [    0.355548] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:25:43 pelle kernel: [    0.355563] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Sep  8 00:25:43 pelle kernel: [    0.355650] ata_piix 0000:00:1f.2: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.355949] ACPI: Battery Slot [BAT1] (battery absent)
Sep  8 00:25:43 pelle kernel: [    0.355996] isapnp: Scanning for PnP cards...
Sep  8 00:25:43 pelle kernel: [    0.405236] scsi0 : ata_piix
Sep  8 00:25:43 pelle kernel: [    0.449178] scsi1 : ata_piix
Sep  8 00:25:43 pelle kernel: [    0.452143] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
Sep  8 00:25:43 pelle kernel: [    0.452154] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
Sep  8 00:25:43 pelle kernel: [    0.453640] Fixed MDIO Bus: probed
Sep  8 00:25:43 pelle kernel: [    0.453766] PPP generic driver version 2.4.2
Sep  8 00:25:43 pelle kernel: [    0.453911] tun: Universal TUN/TAP device driver, 1.6
Sep  8 00:25:43 pelle kernel: [    0.453918] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep  8 00:25:43 pelle kernel: [    0.454189] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep  8 00:25:43 pelle kernel: [    0.454257] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:25:43 pelle kernel: [    0.454302] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.454312] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep  8 00:25:43 pelle kernel: [    0.454440] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep  8 00:25:43 pelle kernel: [    0.454486] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Sep  8 00:25:43 pelle kernel: [    0.454507] ehci_hcd 0000:00:1d.7: debug port 1
Sep  8 00:25:43 pelle kernel: [    0.458398] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Sep  8 00:25:43 pelle kernel: [    0.458447] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
Sep  8 00:25:43 pelle kernel: [    0.506067] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Sep  8 00:25:43 pelle kernel: [    0.506424] usb usb1: configuration #1 chosen from 1 choice
Sep  8 00:25:43 pelle kernel: [    0.506521] hub 1-0:1.0: USB hub found
Sep  8 00:25:43 pelle kernel: [    0.506548] hub 1-0:1.0: 8 ports detected
Sep  8 00:25:43 pelle kernel: [    0.506760] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep  8 00:25:43 pelle kernel: [    0.506818] uhci_hcd: USB Universal Host Controller Interface driver
Sep  8 00:25:43 pelle kernel: [    0.506914] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:25:43 pelle kernel: [    0.506936] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.506945] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep  8 00:25:43 pelle kernel: [    0.507084] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep  8 00:25:43 pelle kernel: [    0.507136] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
Sep  8 00:25:43 pelle kernel: [    0.507440] usb usb2: configuration #1 chosen from 1 choice
Sep  8 00:25:43 pelle kernel: [    0.507531] hub 2-0:1.0: USB hub found
Sep  8 00:25:43 pelle kernel: [    0.507555] hub 2-0:1.0: 2 ports detected
Sep  8 00:25:43 pelle kernel: [    0.507688] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:25:43 pelle kernel: [    0.507706] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.507715] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep  8 00:25:43 pelle kernel: [    0.507844] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep  8 00:25:43 pelle kernel: [    0.507911] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
Sep  8 00:25:43 pelle kernel: [    0.508189] usb usb3: configuration #1 chosen from 1 choice
Sep  8 00:25:43 pelle kernel: [    0.508288] hub 3-0:1.0: USB hub found
Sep  8 00:25:43 pelle kernel: [    0.508314] hub 3-0:1.0: 2 ports detected
Sep  8 00:25:43 pelle kernel: [    0.508451] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:25:43 pelle kernel: [    0.508469] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.508478] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep  8 00:25:43 pelle kernel: [    0.508592] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep  8 00:25:43 pelle kernel: [    0.508655] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
Sep  8 00:25:43 pelle kernel: [    0.508936] usb usb4: configuration #1 chosen from 1 choice
Sep  8 00:25:43 pelle kernel: [    0.509080] hub 4-0:1.0: USB hub found
Sep  8 00:25:43 pelle kernel: [    0.509104] hub 4-0:1.0: 2 ports detected
Sep  8 00:25:43 pelle kernel: [    0.509240] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 00:25:43 pelle kernel: [    0.509259] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    0.509269] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep  8 00:25:43 pelle kernel: [    0.509385] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep  8 00:25:43 pelle kernel: [    0.509450] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
Sep  8 00:25:43 pelle kernel: [    0.509733] usb usb5: configuration #1 chosen from 1 choice
Sep  8 00:25:43 pelle kernel: [    0.509832] hub 5-0:1.0: USB hub found
Sep  8 00:25:43 pelle kernel: [    0.509854] hub 5-0:1.0: 2 ports detected
Sep  8 00:25:43 pelle kernel: [    0.510127] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Sep  8 00:25:43 pelle kernel: [    0.514060] i8042.c: Warning: Keylock active.
Sep  8 00:25:43 pelle kernel: [    0.565959] i8042.c: Detected active multiplexing controller, rev 1.1.
Sep  8 00:25:43 pelle kernel: [    0.571633] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  8 00:25:43 pelle kernel: [    0.571669] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Sep  8 00:25:43 pelle kernel: [    0.571680] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Sep  8 00:25:43 pelle kernel: [    0.571690] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Sep  8 00:25:43 pelle kernel: [    0.571699] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Sep  8 00:25:43 pelle kernel: [    0.572006] mice: PS/2 mouse device common for all mice
Sep  8 00:25:43 pelle kernel: [    0.572463] rtc_cmos 00:03: RTC can wake from S4
Sep  8 00:25:43 pelle kernel: [    0.572579] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep  8 00:25:43 pelle kernel: [    0.572633] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Sep  8 00:25:43 pelle kernel: [    0.573077] device-mapper: uevent: version 1.0.3
Sep  8 00:25:43 pelle kernel: [    0.617106] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Sep  8 00:25:43 pelle kernel: [    0.650196] Freeing initrd memory: 7784k freed
Sep  8 00:25:43 pelle kernel: [    0.658504] device-mapper: multipath: version 1.1.0 loaded
Sep  8 00:25:43 pelle kernel: [    0.658515] device-mapper: multipath round-robin: version 1.0.0 loaded
Sep  8 00:25:43 pelle kernel: [    0.658971] EISA: Probing bus 0 at eisa.0
Sep  8 00:25:43 pelle kernel: [    0.658987] Cannot allocate resource for EISA slot 1
Sep  8 00:25:43 pelle kernel: [    0.658994] Cannot allocate resource for EISA slot 2
Sep  8 00:25:43 pelle kernel: [    0.659000] Cannot allocate resource for EISA slot 3
Sep  8 00:25:43 pelle kernel: [    0.659006] Cannot allocate resource for EISA slot 4
Sep  8 00:25:43 pelle kernel: [    0.659013] Cannot allocate resource for EISA slot 5
Sep  8 00:25:43 pelle kernel: [    0.659019] Cannot allocate resource for EISA slot 6
Sep  8 00:25:43 pelle kernel: [    0.659037] EISA: Detected 0 cards.
Sep  8 00:25:43 pelle kernel: [    0.659489] cpuidle: using governor ladder
Sep  8 00:25:43 pelle kernel: [    0.659836] cpuidle: using governor menu
Sep  8 00:25:43 pelle kernel: [    0.661159] TCP cubic registered
Sep  8 00:25:43 pelle kernel: [    0.661659] NET: Registered protocol family 10
Sep  8 00:25:43 pelle kernel: [    0.662999] lo: Disabled Privacy Extensions
Sep  8 00:25:43 pelle kernel: [    0.663932] NET: Registered protocol family 17
Sep  8 00:25:43 pelle kernel: [    0.664077] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
Sep  8 00:25:43 pelle kernel: [    0.664087] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep  8 00:25:43 pelle kernel: [    0.665335] Using IPI No-Shortcut mode
Sep  8 00:25:43 pelle kernel: [    0.665595] PM: Resume from disk failed.
Sep  8 00:25:43 pelle kernel: [    0.665626] registered taskstats version 1
Sep  8 00:25:43 pelle kernel: [    0.666322]   Magic number: 10:147:449
Sep  8 00:25:43 pelle kernel: [    0.666477] rtc_cmos 00:03: setting system clock to 2010-09-07 21:25:31 UTC (1283894731)
Sep  8 00:25:43 pelle kernel: [    0.666487] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep  8 00:25:43 pelle kernel: [    0.666493] EDD information not available.
Sep  8 00:25:43 pelle kernel: [    0.680709] ata1.00: configured for UDMA/133
Sep  8 00:25:43 pelle kernel: [    0.748808] isapnp: No Plug & Play device found
Sep  8 00:25:43 pelle kernel: [    0.749098] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
Sep  8 00:25:43 pelle kernel: [    0.749424] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Sep  8 00:25:43 pelle kernel: [    0.749478] sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep  8 00:25:43 pelle kernel: [    0.749611] sd 0:0:0:0: [sda] Write Protect is off
Sep  8 00:25:43 pelle kernel: [    0.749620] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  8 00:25:43 pelle kernel: [    0.749727] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  8 00:25:43 pelle kernel: [    0.750100]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Sep  8 00:25:43 pelle kernel: [    0.822586] sd 0:0:0:0: [sda] Attached SCSI disk
Sep  8 00:25:43 pelle kernel: [    0.822634] Freeing unused kernel memory: 660k freed
Sep  8 00:25:43 pelle kernel: [    0.823207] Write protecting the kernel text: 4680k
Sep  8 00:25:43 pelle kernel: [    0.823293] Write protecting the kernel read-only data: 1844k
Sep  8 00:25:43 pelle kernel: [    0.857121] usb 1-5: new high speed USB device using ehci_hcd and address 2
Sep  8 00:25:43 pelle kernel: [    0.862798] udev: starting version 151
Sep  8 00:25:43 pelle kernel: [    0.994944] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Sep  8 00:25:43 pelle kernel: [    1.126174] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep  8 00:25:43 pelle kernel: [    1.126225] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep  8 00:25:43 pelle kernel: [    1.126307] r8169 0000:02:00.0: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [    1.126390]   alloc irq_desc for 28 on node -1
Sep  8 00:25:43 pelle kernel: [    1.126398]   alloc kstat_irqs on node -1
Sep  8 00:25:43 pelle kernel: [    1.126430] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
Sep  8 00:25:43 pelle kernel: [    1.128411] eth0: RTL8102e at 0xf804e000, 00:23:8b:0a:17:9d, XID 04a00000 IRQ 28
Sep  8 00:25:43 pelle kernel: [    1.202053] usb 1-5: configuration #1 chosen from 1 choice
Sep  8 00:25:43 pelle kernel: [    1.633136] usb 4-2: new full speed USB device using uhci_hcd and address 2
Sep  8 00:25:43 pelle kernel: [    1.727523] EXT4-fs (sda1): mounted filesystem with ordered data mode
Sep  8 00:25:43 pelle kernel: [    1.803093] usb 4-2: configuration #1 chosen from 1 choice
Sep  8 00:25:43 pelle kernel: [    9.531805] Adding 975864k swap on /dev/sda5.  Priority:-1 extents:1 across:975864k 
Sep  8 00:25:43 pelle kernel: [    9.559497] udev: starting version 151
Sep  8 00:25:43 pelle kernel: [    9.733870] lp: driver loaded but no devices found
Sep  8 00:25:43 pelle kernel: [    9.734154] Linux agpgart interface v0.103
Sep  8 00:25:43 pelle kernel: [    9.936142] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
Sep  8 00:25:43 pelle kernel: [    9.936568] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Sep  8 00:25:43 pelle kernel: [    9.939376] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Sep  8 00:25:43 pelle kernel: [   10.079454] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Sep  8 00:25:43 pelle kernel: [   10.079606] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
Sep  8 00:25:43 pelle kernel: [   10.129242] intel_rng: FWH not detected
Sep  8 00:25:43 pelle kernel: [   10.242609] hso: /build/buildd/linux-2.6.32/drivers/net/usb/hso.c: 1.2 Option Wireless
Sep  8 00:25:43 pelle kernel: [   10.243814] hso0: Disabled Privacy Extensions
Sep  8 00:25:43 pelle kernel: [   10.294376] usbcore: registered new interface driver hso
Sep  8 00:25:43 pelle kernel: [   10.524724] [drm] Initialized drm 1.1.0 20060810
Sep  8 00:25:43 pelle kernel: [   10.545075] Linux video capture interface: v2.00
Sep  8 00:25:43 pelle kernel: [   10.568502] type=1505 audit(1283894741.401:2):  operation="profile_load" pid=584 name="/sbin/dhclient3"
Sep  8 00:25:43 pelle kernel: [   10.574885] type=1505 audit(1283894741.405:3):  operation="profile_load" pid=584 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:25:43 pelle kernel: [   10.575357] type=1505 audit(1283894741.405:4):  operation="profile_load" pid=584 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:25:43 pelle kernel: [   10.675807] acer-wmi: Acer Laptop ACPI-WMI Extras
Sep  8 00:25:43 pelle kernel: [   10.675820] acer-wmi: Blacklisted hardware detected - not loading
Sep  8 00:25:43 pelle kernel: [   10.677781] cfg80211: Calling CRDA to update world regulatory domain
Sep  8 00:25:43 pelle kernel: [   10.765307] cfg80211: World regulatory domain updated:
Sep  8 00:25:43 pelle kernel: [   10.765318] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep  8 00:25:43 pelle kernel: [   10.765329] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:25:43 pelle kernel: [   10.765338] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:25:43 pelle kernel: [   10.765348] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:25:43 pelle kernel: [   10.765357] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:25:43 pelle kernel: [   10.765366] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 00:25:43 pelle kernel: [   10.766734] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Sep  8 00:25:43 pelle kernel: [   10.770425] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
Sep  8 00:25:43 pelle kernel: [   10.770642] usbcore: registered new interface driver uvcvideo
Sep  8 00:25:43 pelle kernel: [   10.770655] USB Video Class driver (v0.1.0)
Sep  8 00:25:43 pelle kernel: [   10.933637] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:25:43 pelle kernel: [   10.933653] i915 0000:00:02.0: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [   10.949617] acerhdf: Acer Aspire One Fan driver, v.0.5.20
Sep  8 00:25:43 pelle kernel: [   10.949632] acerhdf: Fan control off, to enable do:
Sep  8 00:25:43 pelle kernel: [   10.949638] acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
Sep  8 00:25:43 pelle kernel: [   10.980351] mtrr: no more MTRRs available
Sep  8 00:25:43 pelle kernel: [   10.980361] [drm] MTRR allocation failed.  Graphics performance may suffer.
Sep  8 00:25:43 pelle kernel: [   10.982169] [drm] set up 7M of stolen space
Sep  8 00:25:43 pelle kernel: [   11.114199] [drm] initialized overlay support
Sep  8 00:25:43 pelle kernel: [   11.444754] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
Sep  8 00:25:43 pelle kernel: [   11.500702] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Sep  8 00:25:43 pelle kernel: [   11.539503] fb0: inteldrmfb frame buffer device
Sep  8 00:25:43 pelle kernel: [   11.539511] registered panic notifier
Sep  8 00:25:43 pelle kernel: [   11.539531] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep  8 00:25:43 pelle kernel: [   11.539631] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 00:25:43 pelle kernel: [   11.539695] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [   11.596351] vga16fb: initializing
Sep  8 00:25:43 pelle kernel: [   11.596366] vga16fb: mapped to 0xc00a0000
Sep  8 00:25:43 pelle kernel: [   11.596378] vga16fb: not registering due to another framebuffer present
Sep  8 00:25:43 pelle kernel: [   11.673247] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Sep  8 00:25:43 pelle kernel: [   11.730486] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Sep  8 00:25:43 pelle kernel: [   11.730520] ath5k 0000:03:00.0: setting latency timer to 64
Sep  8 00:25:43 pelle kernel: [   11.730611] ath5k 0000:03:00.0: registered as 'phy0'
Sep  8 00:25:43 pelle kernel: [   11.953210] Console: switching to colour frame buffer device 128x37
Sep  8 00:25:43 pelle kernel: [   12.246042] ath: EEPROM regdomain: 0x65
Sep  8 00:25:43 pelle kernel: [   12.246049] ath: EEPROM indicates we should expect a direct regpair map
Sep  8 00:25:43 pelle kernel: [   12.246058] ath: Country alpha2 being used: 00
Sep  8 00:25:43 pelle kernel: [   12.246063] ath: Regpair used: 0x65
Sep  8 00:25:43 pelle kernel: [   12.358568] phy0: Selected rate control algorithm 'minstrel'
Sep  8 00:25:43 pelle kernel: [   12.360858] Registered led device: ath5k-phy0::rx
Sep  8 00:25:43 pelle kernel: [   12.360923] Registered led device: ath5k-phy0::tx
Sep  8 00:25:43 pelle kernel: [   12.360934] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Sep  8 00:25:43 pelle NetworkManager: <info>  Trying to start the modem-manager...
Sep  8 00:25:43 pelle kernel: [   12.531514] type=1505 audit(1283894743.361:5):  operation="profile_load" pid=796 name="/usr/share/gdm/guest-session/Xsession"
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: init!
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Sep  8 00:25:43 pelle NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0)
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0)
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0)
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0): no ifupdown configuration found.
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: end _init.
Sep  8 00:25:43 pelle NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:25:43 pelle kernel: [   12.555776] type=1505 audit(1283894743.385:6):  operation="profile_replace" pid=797 name="/sbin/dhclient3"
Sep  8 00:25:43 pelle kernel: [   12.556564] type=1505 audit(1283894743.389:7):  operation="profile_replace" pid=797 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 00:25:43 pelle kernel: [   12.557054] type=1505 audit(1283894743.389:8):  operation="profile_replace" pid=797 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 00:25:43 pelle NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep  8 00:25:43 pelle NetworkManager: <info>  Found wlan radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill1) (driver <unknown>)
Sep  8 00:25:43 pelle NetworkManager: <info>  Found wwan radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/rfkill/rfkill0) (driver usb)
Sep  8 00:25:43 pelle modem-manager: Loaded plugin MotoC
Sep  8 00:25:43 pelle modem-manager: Loaded plugin Gobi
Sep  8 00:25:43 pelle modem-manager: Loaded plugin Huawei
Sep  8 00:25:43 pelle modem-manager: Loaded plugin Nokia
Sep  8 00:25:43 pelle modem-manager: Loaded plugin ZTE
Sep  8 00:25:43 pelle modem-manager: Loaded plugin Option
Sep  8 00:25:43 pelle modem-manager: Loaded plugin Sierra
Sep  8 00:25:43 pelle modem-manager: Loaded plugin Novatel
Sep  8 00:25:43 pelle modem-manager: Loaded plugin Ericsson MBM
Sep  8 00:25:43 pelle NetworkManager: <info>  WiFi enabled by radio killswitch; disabled by state file
Sep  8 00:25:43 pelle NetworkManager: <info>  WWAN enabled by radio killswitch; disabled by state file
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: (153375472) ... get_connections.
Sep  8 00:25:43 pelle NetworkManager:    SCPlugin-Ifupdown: (153375472) ... get_connections (managed=false): return empty list.
Sep  8 00:25:43 pelle kernel: [   12.605287] type=1505 audit(1283894743.437:9):  operation="profile_load" pid=798 name="/usr/bin/evince"
Sep  8 00:25:43 pelle modem-manager: Loaded plugin Generic
Sep  8 00:25:43 pelle modem-manager: Loaded plugin Option High-Speed
Sep  8 00:25:43 pelle modem-manager: Loaded plugin AnyData
Sep  8 00:25:43 pelle modem-manager: Loaded plugin Longcheer
Sep  8 00:25:43 pelle NetworkManager:    Ifupdown: get unmanaged devices count: 0
Sep  8 00:25:43 pelle kernel: [   12.675116] type=1505 audit(1283894743.505:10):  operation="profile_load" pid=798 name="/usr/bin/evince-previewer"
Sep  8 00:25:43 pelle NetworkManager: <info>  (eth0): carrier is OFF
Sep  8 00:25:43 pelle NetworkManager: <info>  (eth0): new Ethernet device (driver: 'r8169')
Sep  8 00:25:43 pelle NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep  8 00:25:43 pelle NetworkManager: <info>  (eth0): now managed
Sep  8 00:25:43 pelle NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Sep  8 00:25:43 pelle NetworkManager: <info>  (eth0): bringing up device.
Sep  8 00:25:43 pelle kernel: [   12.691367] type=1505 audit(1283894743.521:11):  operation="profile_load" pid=798 name="/usr/bin/evince-thumbnailer"
Sep  8 00:25:43 pelle kernel: [   12.701007] r8169: eth0: link down
Sep  8 00:25:43 pelle kernel: [   12.701650] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep  8 00:25:43 pelle NetworkManager: <info>  (eth0): preparing device.
Sep  8 00:25:43 pelle NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Sep  8 00:25:43 pelle NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0
Sep  8 00:25:43 pelle NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
Sep  8 00:25:43 pelle kernel: [   12.864020] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x023b8000
Sep  8 00:25:43 pelle NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'ath5k')
Sep  8 00:25:43 pelle NetworkManager: <info>  (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep  8 00:25:43 pelle NetworkManager: <info>  (wlan0): now managed
Sep  8 00:25:43 pelle NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Sep  8 00:25:43 pelle NetworkManager: <info>  (wlan0): bringing up device.
Sep  8 00:25:43 pelle modem-manager: (ttyHS0) opening serial device...
Sep  8 00:25:43 pelle modem-manager: (ttyHS0): probe requested by plugin 'Option High-Speed'
Sep  8 00:25:43 pelle modem-manager: (ttyHS1) opening serial device...
Sep  8 00:25:43 pelle modem-manager: (ttyHS1): probe requested by plugin 'Option High-Speed'
Sep  8 00:25:43 pelle modem-manager: (ttyHS2) opening serial device...
Sep  8 00:25:43 pelle modem-manager: (ttyHS2): probe requested by plugin 'Option High-Speed'
Sep  8 00:25:43 pelle modem-manager: (ttyHS3) opening serial device...
Sep  8 00:25:43 pelle modem-manager: (ttyHS3): probe requested by plugin 'Option High-Speed'
Sep  8 00:25:43 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port hso0
Sep  8 00:25:43 pelle modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2
Sep  8 00:25:43 pelle NetworkManager: <info>  (wlan0): preparing device.
Sep  8 00:25:43 pelle NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Sep  8 00:25:43 pelle kernel: [   12.974338] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep  8 00:25:43 pelle NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
Sep  8 00:25:43 pelle NetworkManager: <info>  modem-manager is now available
Sep  8 00:25:43 pelle NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Sep  8 00:25:43 pelle NetworkManager: <info>  Trying to start the supplicant...
Sep  8 00:25:43 pelle NetworkManager: <info>  (wlan0): supplicant manager state:  down -> idle
Sep  8 00:25:43 pelle NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 0)
Sep  8 00:25:43 pelle NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready
Sep  8 00:25:44 pelle kernel: [   13.473171] ppdev: user-space parallel port driver
Sep  8 00:25:45 pelle kernel: [   14.303829] CPU0 attaching NULL sched-domain.
Sep  8 00:25:45 pelle kernel: [   14.303841] CPU1 attaching NULL sched-domain.
Sep  8 00:25:45 pelle kernel: [   14.324216] CPU0 attaching sched-domain:
Sep  8 00:25:45 pelle kernel: [   14.324231]  domain 0: span 0-1 level SIBLING
Sep  8 00:25:45 pelle kernel: [   14.324245]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:25:45 pelle kernel: [   14.324271]   domain 1: span 0-1 level MC
Sep  8 00:25:45 pelle kernel: [   14.324281]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:25:45 pelle kernel: [   14.324303] CPU1 attaching sched-domain:
Sep  8 00:25:45 pelle kernel: [   14.324312]  domain 0: span 0-1 level SIBLING
Sep  8 00:25:45 pelle kernel: [   14.324323]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:25:45 pelle kernel: [   14.324346]   domain 1: span 0-1 level MC
Sep  8 00:25:45 pelle kernel: [   14.324366]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:25:47 pelle modem-manager: (ttyHS0) closing serial device...
Sep  8 00:25:47 pelle modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 as /org/freedesktop/ModemManager/Modems/0
Sep  8 00:25:47 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS0
Sep  8 00:25:47 pelle modem-manager: (ttyHS1) closing serial device...
Sep  8 00:25:47 pelle modem-manager: (ttyHS3) closing serial device...
Sep  8 00:25:47 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS1
Sep  8 00:25:47 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS3
Sep  8 00:25:47 pelle NetworkManager: <info>  (hso0): new GSM device (driver: 'hso')
Sep  8 00:25:47 pelle NetworkManager: <info>  (hso0): exported as /org/freedesktop/NetworkManager/Devices/2
Sep  8 00:25:47 pelle NetworkManager: <info>  (hso0): now managed
Sep  8 00:25:47 pelle NetworkManager: <info>  (hso0): device state change: 1 -> 2 (reason 2)
Sep  8 00:25:47 pelle NetworkManager: <info>  (hso0): deactivating device (reason: 2).
Sep  8 00:25:47 pelle NetworkManager: <info>  (hso0): device state change: 2 -> 3 (reason 0)
Sep  8 00:25:47 pelle kernel: [   16.981650] CPU0 attaching NULL sched-domain.
Sep  8 00:25:47 pelle kernel: [   16.981667] CPU1 attaching NULL sched-domain.
Sep  8 00:25:47 pelle kernel: [   17.008218] CPU0 attaching sched-domain:
Sep  8 00:25:47 pelle kernel: [   17.008235]  domain 0: span 0-1 level SIBLING
Sep  8 00:25:47 pelle kernel: [   17.008248]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 00:25:47 pelle kernel: [   17.008274]   domain 1: span 0-1 level MC
Sep  8 00:25:47 pelle kernel: [   17.008284]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:25:47 pelle kernel: [   17.008306] CPU1 attaching sched-domain:
Sep  8 00:25:47 pelle kernel: [   17.008315]  domain 0: span 0-1 level SIBLING
Sep  8 00:25:47 pelle kernel: [   17.008326]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 00:25:47 pelle kernel: [   17.008349]   domain 1: span 0-1 level MC
Sep  8 00:25:47 pelle kernel: [   17.008367]    groups: 0-1 (cpu_power = 1178)
Sep  8 00:25:58 pelle modem-manager: (ttyHS2) closing serial device...
Sep  8 00:26:22 pelle NetworkManager: <info>  Activation (wlan0) starting connection 'Vappugospel XXV'
Sep  8 00:26:22 pelle NetworkManager: <info>  (wlan0): device state change: 3 -> 4 (reason 0)
Sep  8 00:26:22 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep  8 00:26:22 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep  8 00:26:22 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep  8 00:26:22 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep  8 00:26:22 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep  8 00:26:22 pelle NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Sep  8 00:26:22 pelle NetworkManager: <info>  Activation (wlan0/wireless): access point 'Vappugospel XXV' has security, but secrets are required.
Sep  8 00:26:22 pelle NetworkManager: <info>  (wlan0): device state change: 5 -> 6 (reason 0)
Sep  8 00:26:22 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep  8 00:26:38 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep  8 00:26:38 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep  8 00:26:38 pelle NetworkManager: <info>  (wlan0): device state change: 6 -> 4 (reason 0)
Sep  8 00:26:38 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep  8 00:26:38 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep  8 00:26:38 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep  8 00:26:38 pelle NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Sep  8 00:26:38 pelle NetworkManager: <info>  Activation (wlan0/wireless): connection 'Vappugospel XXV' has security, and secrets exist.  No new secrets needed.
Sep  8 00:26:38 pelle NetworkManager: <info>  Config: added 'ssid' value 'Vappugospel XXV'
Sep  8 00:26:38 pelle NetworkManager: <info>  Config: added 'mode' value '1'
Sep  8 00:26:38 pelle NetworkManager: <info>  Config: added 'frequency' value '2412'
Sep  8 00:26:38 pelle NetworkManager: <info>  Config: added 'key_mgmt' value 'NONE'
Sep  8 00:26:38 pelle NetworkManager: <info>  Config: added 'auth_alg' value 'OPEN'
Sep  8 00:26:38 pelle NetworkManager: <info>  Config: added 'wep_key0' value '<omitted>'
Sep  8 00:26:38 pelle NetworkManager: <info>  Config: added 'wep_tx_keyidx' value '0'
Sep  8 00:26:38 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  8 00:26:38 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  8 00:26:38 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep  8 00:26:38 pelle NetworkManager: <info>  Config: set interface ap_scan to 2
Sep  8 00:26:38 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  inactive -> scanning
Sep  8 00:26:38 pelle NetworkManager: <info>  WiFi now disabled by radio killswitch
Sep  8 00:26:38 pelle NetworkManager: <info>  (wlan0): device state change: 5 -> 2 (reason 0)
Sep  8 00:26:38 pelle NetworkManager: <info>  (wlan0): deactivating device (reason: 0).
Sep  8 00:52:19 pelle kernel: [ 1608.200077] CE: hpet increasing min_delta_ns to 15000 nsec
Sep  8 16:13:16 pelle kernel: [56865.688717] __ratelimit: 9 callbacks suppressed
Sep  8 16:13:16 pelle kernel: [56865.688731] python[1355]: segfault at 19 ip 00000019 sp bffcdfdc error 4 in libm-2.11.1.so[110000+24000]
Sep  8 16:13:16 pelle kernel: Kernel logging (proc) stopped.
Sep  8 16:13:54 pelle kernel: imklog 4.2.0, log source = /proc/kmsg started.
Sep  8 16:13:54 pelle kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep  8 16:13:54 pelle kernel: [    0.000000] Initializing cgroup subsys cpu
Sep  8 16:13:54 pelle kernel: [    0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
Sep  8 16:13:54 pelle kernel: [    0.000000] KERNEL supported cpus:
Sep  8 16:13:54 pelle kernel: [    0.000000]   Intel GenuineIntel
Sep  8 16:13:54 pelle kernel: [    0.000000]   AMD AuthenticAMD
Sep  8 16:13:54 pelle kernel: [    0.000000]   NSC Geode by NSC
Sep  8 16:13:54 pelle kernel: [    0.000000]   Cyrix CyrixInstead
Sep  8 16:13:54 pelle kernel: [    0.000000]   Centaur CentaurHauls
Sep  8 16:13:54 pelle kernel: [    0.000000]   Transmeta GenuineTMx86
Sep  8 16:13:54 pelle kernel: [    0.000000]   Transmeta TransmetaCPU
Sep  8 16:13:54 pelle kernel: [    0.000000]   UMC UMC UMC UMC
Sep  8 16:13:54 pelle kernel: [    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 16:13:54 pelle kernel: [    0.000000] BIOS-provided physical RAM map:
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000] DMI 2.4 present.
Sep  8 16:13:54 pelle kernel: [    0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
Sep  8 16:13:54 pelle kernel: [    0.000000] MTRR default type: uncachable
Sep  8 16:13:54 pelle kernel: [    0.000000] MTRR fixed ranges enabled:
Sep  8 16:13:54 pelle kernel: [    0.000000]   00000-9FFFF write-back
Sep  8 16:13:54 pelle kernel: [    0.000000]   A0000-BFFFF uncachable
Sep  8 16:13:54 pelle kernel: [    0.000000]   C0000-C7FFF write-protect
Sep  8 16:13:54 pelle kernel: [    0.000000]   C8000-EFFFF uncachable
Sep  8 16:13:54 pelle kernel: [    0.000000]   F0000-FFFFF write-protect
Sep  8 16:13:54 pelle kernel: [    0.000000] MTRR variable ranges enabled:
Sep  8 16:13:54 pelle kernel: [    0.000000]   0 base 0FFFE0000 mask 0FFFE0000 write-protect
Sep  8 16:13:54 pelle kernel: [    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
Sep  8 16:13:54 pelle kernel: [    0.000000]   2 base 000000000 mask 0E0000000 write-back
Sep  8 16:13:54 pelle kernel: [    0.000000]   3 base 020000000 mask 0E0000000 write-back
Sep  8 16:13:54 pelle kernel: [    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
Sep  8 16:13:54 pelle kernel: [    0.000000]   5 base 03F600000 mask 0FFE00000 uncachable
Sep  8 16:13:54 pelle kernel: [    0.000000]   6 base 03F500000 mask 0FFF00000 uncachable
Sep  8 16:13:54 pelle kernel: [    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
Sep  8 16:13:54 pelle kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep  8 16:13:54 pelle kernel: [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000] Scanning 1 areas for low memory corruption
Sep  8 16:13:54 pelle kernel: [    0.000000] modified physical RAM map:
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 0000000000100000 - 000000003f376000 (usable)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 16:13:54 pelle kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Sep  8 16:13:54 pelle kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Sep  8 16:13:54 pelle kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Sep  8 16:13:54 pelle kernel: [    0.000000]  0000000000 - 00377fe000 page 4k
Sep  8 16:13:54 pelle kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 8e2000-9c3000
Sep  8 16:13:54 pelle kernel: [    0.000000] RAMDISK: 2ef3e000 - 2f6d8324
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: RSDP 000fe020 00024 (v02 INTEL )
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: XSDT 3f4fe120 00064 (v01 INTEL  Napa     00000001      01000013)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: FACP 3f4fc000 000F4 (v04 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: DSDT 3f4f2000 05DE4 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: FACS 3f488000 00040
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: SSDT 3f4fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: HPET 3f4fb000 00038 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: APIC 3f4fa000 00068 (v02 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: MCFG 3f4f9000 0003C (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: SLIC 3f4f1000 00180 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: BOOT 3f4f0000 00028 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 16:13:54 pelle kernel: [    0.000000] 125MB HIGHMEM available.
Sep  8 16:13:54 pelle kernel: [    0.000000] 887MB LOWMEM available.
Sep  8 16:13:54 pelle kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Sep  8 16:13:54 pelle kernel: [    0.000000]   low ram: 0 - 377fe000
Sep  8 16:13:54 pelle kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Sep  8 16:13:54 pelle kernel: [    0.000000]   node 0 bootmap 00007000 - 0000df00
Sep  8 16:13:54 pelle kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Sep  8 16:13:54 pelle kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Sep  8 16:13:54 pelle kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Sep  8 16:13:54 pelle kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Sep  8 16:13:54 pelle kernel: [    0.000000]   #3 [0000100000 - 00008ddeb8]    TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
Sep  8 16:13:54 pelle kernel: [    0.000000]   #4 [002ef3e000 - 002f6d8324]          RAMDISK ==> [002ef3e000 - 002f6d8324]
Sep  8 16:13:54 pelle kernel: [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Sep  8 16:13:54 pelle kernel: [    0.000000]   #6 [00008de000 - 00008e1244]              BRK ==> [00008de000 - 00008e1244]
Sep  8 16:13:54 pelle kernel: [    0.000000]   #7 [00008e2000 - 00009bd000]          PGTABLE ==> [00008e2000 - 00009bd000]
Sep  8 16:13:54 pelle kernel: [    0.000000]   #8 [0000007000 - 000000e000]          BOOTMAP ==> [0000007000 - 000000e000]
Sep  8 16:13:54 pelle kernel: [    0.000000] Zone PFN ranges:
Sep  8 16:13:54 pelle kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Sep  8 16:13:54 pelle kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Sep  8 16:13:54 pelle kernel: [    0.000000]   HighMem  0x000377fe -> 0x0003f500
Sep  8 16:13:54 pelle kernel: [    0.000000] Movable zone start PFN for each node
Sep  8 16:13:54 pelle kernel: [    0.000000] early_node_map[6] active PFN ranges
Sep  8 16:13:54 pelle kernel: [    0.000000]     0: 0x00000000 -> 0x00000002
Sep  8 16:13:54 pelle kernel: [    0.000000]     0: 0x00000006 -> 0x0000009f
Sep  8 16:13:54 pelle kernel: [    0.000000]     0: 0x00000100 -> 0x0003f376
Sep  8 16:13:54 pelle kernel: [    0.000000]     0: 0x0003f3bf -> 0x0003f46d
Sep  8 16:13:54 pelle kernel: [    0.000000]     0: 0x0003f4bf -> 0x0003f4f0
Sep  8 16:13:54 pelle kernel: [    0.000000]     0: 0x0003f4ff -> 0x0003f500
Sep  8 16:13:54 pelle kernel: [    0.000000] On node 0 totalpages: 259057
Sep  8 16:13:54 pelle kernel: [    0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000
Sep  8 16:13:54 pelle kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Sep  8 16:13:54 pelle kernel: [    0.000000]   DMA zone: 0 pages reserved
Sep  8 16:13:54 pelle kernel: [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
Sep  8 16:13:54 pelle kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Sep  8 16:13:54 pelle kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Sep  8 16:13:54 pelle kernel: [    0.000000]   HighMem zone: 251 pages used for memmap
Sep  8 16:13:54 pelle kernel: [    0.000000]   HighMem zone: 31581 pages, LIFO batch:7
Sep  8 16:13:54 pelle kernel: [    0.000000] Using APIC driver default
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Sep  8 16:13:54 pelle kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: IRQ2 used by override.
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep  8 16:13:54 pelle kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep  8 16:13:54 pelle kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep  8 16:13:54 pelle kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep  8 16:13:54 pelle kernel: [    0.000000] nr_irqs_gsi: 24
Sep  8 16:13:54 pelle kernel: [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Sep  8 16:13:54 pelle kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep  8 16:13:54 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Sep  8 16:13:54 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Sep  8 16:13:54 pelle kernel: [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Sep  8 16:13:54 pelle kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep  8 16:13:54 pelle kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Sep  8 16:13:54 pelle kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536
Sep  8 16:13:54 pelle kernel: [    0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
Sep  8 16:13:54 pelle kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 
Sep  8 16:13:54 pelle kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257030
Sep  8 16:13:54 pelle kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=05e65f51-4919-405f-ae5e-374a2ae344e8 ro quiet splash
Sep  8 16:13:54 pelle kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Sep  8 16:13:54 pelle kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep  8 16:13:54 pelle kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep  8 16:13:54 pelle kernel: [    0.000000] Enabling fast FPU save and restore... done.
Sep  8 16:13:54 pelle kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Sep  8 16:13:54 pelle kernel: [    0.000000] Initializing CPU#0
Sep  8 16:13:54 pelle kernel: [    0.000000] allocated 5186560 bytes of page_cgroup
Sep  8 16:13:54 pelle kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep  8 16:13:54 pelle kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
Sep  8 16:13:54 pelle kernel: [    0.000000] Memory: 1004836k/1037312k available (4679k kernel code, 30884k reserved, 2124k data, 660k init, 127328k highmem)
Sep  8 16:13:54 pelle kernel: [    0.000000] virtual kernel memory layout:
Sep  8 16:13:54 pelle kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Sep  8 16:13:54 pelle kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Sep  8 16:13:54 pelle kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Sep  8 16:13:54 pelle kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Sep  8 16:13:54 pelle kernel: [    0.000000]       .init : 0xc07a5000 - 0xc084a000   ( 660 kB)
Sep  8 16:13:54 pelle kernel: [    0.000000]       .data : 0xc0591e33 - 0xc07a4e88   (2124 kB)
Sep  8 16:13:54 pelle kernel: [    0.000000]       .text : 0xc0100000 - 0xc0591e33   (4679 kB)
Sep  8 16:13:54 pelle kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Sep  8 16:13:54 pelle kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep  8 16:13:54 pelle kernel: [    0.000000] Hierarchical RCU implementation.
Sep  8 16:13:54 pelle kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Sep  8 16:13:54 pelle kernel: [    0.000000] Console: colour VGA+ 80x25
Sep  8 16:13:54 pelle kernel: [    0.000000] console [tty0] enabled
Sep  8 16:13:54 pelle kernel: [    0.000000] hpet clockevent registered
Sep  8 16:13:54 pelle kernel: [    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Sep  8 16:13:54 pelle kernel: [    0.000000] Fast TSC calibration using PIT
Sep  8 16:13:54 pelle kernel: [    0.000000] Detected 1596.007 MHz processor.
Sep  8 16:13:54 pelle kernel: [    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.01 BogoMIPS (lpj=6384028)
Sep  8 16:13:54 pelle kernel: [    0.004047] Security Framework initialized
Sep  8 16:13:54 pelle kernel: [    0.004091] AppArmor: AppArmor initialized
Sep  8 16:13:54 pelle kernel: [    0.004108] Mount-cache hash table entries: 512
Sep  8 16:13:54 pelle kernel: [    0.004353] Initializing cgroup subsys ns
Sep  8 16:13:54 pelle kernel: [    0.004363] Initializing cgroup subsys cpuacct
Sep  8 16:13:54 pelle kernel: [    0.004373] Initializing cgroup subsys memory
Sep  8 16:13:54 pelle kernel: [    0.004388] Initializing cgroup subsys devices
Sep  8 16:13:54 pelle kernel: [    0.004394] Initializing cgroup subsys freezer
Sep  8 16:13:54 pelle kernel: [    0.004401] Initializing cgroup subsys net_cls
Sep  8 16:13:54 pelle kernel: [    0.004434] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 16:13:54 pelle kernel: [    0.004443] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 16:13:54 pelle kernel: [    0.004450] CPU: L2 cache: 512K
Sep  8 16:13:54 pelle kernel: [    0.004455] CPU: Physical Processor ID: 0
Sep  8 16:13:54 pelle kernel: [    0.004460] CPU: Processor Core ID: 0
Sep  8 16:13:54 pelle kernel: [    0.004468] mce: CPU supports 5 MCE banks
Sep  8 16:13:54 pelle kernel: [    0.004487] CPU0: Thermal monitoring enabled (TM1)
Sep  8 16:13:54 pelle kernel: [    0.004496] using mwait in idle threads.
Sep  8 16:13:54 pelle kernel: [    0.004508] Performance Events: Atom events, Intel PMU driver.
Sep  8 16:13:54 pelle kernel: [    0.004525] ... version:                3
Sep  8 16:13:54 pelle kernel: [    0.004530] ... bit width:              40
Sep  8 16:13:54 pelle kernel: [    0.004534] ... generic registers:      2
Sep  8 16:13:54 pelle kernel: [    0.004539] ... value mask:             000000ffffffffff
Sep  8 16:13:54 pelle kernel: [    0.004545] ... max period:             000000007fffffff
Sep  8 16:13:54 pelle kernel: [    0.004550] ... fixed-purpose events:   3
Sep  8 16:13:54 pelle kernel: [    0.004554] ... event mask:             0000000700000003
Sep  8 16:13:54 pelle kernel: [    0.004563] Checking 'hlt' instruction... OK.
Sep  8 16:13:54 pelle kernel: [    0.020009] Disabling 4MB page tables to avoid TLB bug
Sep  8 16:13:54 pelle kernel: [    0.024458] ACPI: Core revision 20090903
Sep  8 16:13:54 pelle kernel: [    0.040018] ftrace: converting mcount calls to 0f 1f 44 00 00
Sep  8 16:13:54 pelle kernel: [    0.040031] ftrace: allocating 21780 entries in 43 pages
Sep  8 16:13:54 pelle kernel: [    0.044112] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep  8 16:13:54 pelle kernel: [    0.044519] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep  8 16:13:54 pelle kernel: [    0.087300] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 16:13:54 pelle kernel: [    0.088001] Booting processor 1 APIC 0x1 ip 0x6000
Sep  8 16:13:54 pelle kernel: [    0.008000] Initializing CPU#1
Sep  8 16:13:54 pelle kernel: [    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 16:13:54 pelle kernel: [    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 16:13:54 pelle kernel: [    0.008000] CPU: L2 cache: 512K
Sep  8 16:13:54 pelle kernel: [    0.008000] CPU: Physical Processor ID: 0
Sep  8 16:13:54 pelle kernel: [    0.008000] CPU: Processor Core ID: 0
Sep  8 16:13:54 pelle kernel: [    0.008000] CPU1: Thermal monitoring enabled (TM1)
Sep  8 16:13:54 pelle kernel: [    0.172067] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 16:13:54 pelle kernel: [    0.172098] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep  8 16:13:54 pelle kernel: [    0.176036] Brought up 2 CPUs
Sep  8 16:13:54 pelle kernel: [    0.176043] Total of 2 processors activated (6383.96 BogoMIPS).
Sep  8 16:13:54 pelle kernel: [    0.176288] CPU0 attaching sched-domain:
Sep  8 16:13:54 pelle kernel: [    0.176297]  domain 0: span 0-1 level SIBLING
Sep  8 16:13:54 pelle kernel: [    0.176303]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 16:13:54 pelle kernel: [    0.176316]   domain 1: span 0-1 level MC
Sep  8 16:13:54 pelle kernel: [    0.176321]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:13:54 pelle kernel: [    0.176334] CPU1 attaching sched-domain:
Sep  8 16:13:54 pelle kernel: [    0.176339]  domain 0: span 0-1 level SIBLING
Sep  8 16:13:54 pelle kernel: [    0.176344]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 16:13:54 pelle kernel: [    0.176355]   domain 1: span 0-1 level MC
Sep  8 16:13:54 pelle kernel: [    0.176360]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:13:54 pelle kernel: [    0.176592] devtmpfs: initialized
Sep  8 16:13:54 pelle kernel: [    0.176592] regulator: core version 0.5
Sep  8 16:13:54 pelle kernel: [    0.176592] Time: 13:13:42  Date: 09/08/10
Sep  8 16:13:54 pelle kernel: [    0.176592] NET: Registered protocol family 16
Sep  8 16:13:54 pelle kernel: [    0.176592] Trying to unpack rootfs image as initramfs...
Sep  8 16:13:54 pelle kernel: [    0.176592] EISA bus registered
Sep  8 16:13:54 pelle kernel: [    0.176603] ACPI: bus type pci registered
Sep  8 16:13:54 pelle kernel: [    0.176779] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Sep  8 16:13:54 pelle kernel: [    0.176788] PCI: MCFG area at e0000000 reserved in E820
Sep  8 16:13:54 pelle kernel: [    0.176794] PCI: Using MMCONFIG for extended config space
Sep  8 16:13:54 pelle kernel: [    0.176801] PCI: Using configuration type 1 for base access
Sep  8 16:13:54 pelle kernel: [    0.181789] bio: create slab <bio-0> at 0
Sep  8 16:13:54 pelle kernel: [    0.184352] ACPI: EC: Look up EC in DSDT
Sep  8 16:13:54 pelle kernel: [    0.188621] ACPI: Executed 1 blocks of module-level executable AML code
Sep  8 16:13:54 pelle kernel: [    0.192994] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 16:13:54 pelle kernel: [    0.193271] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 16:13:54 pelle kernel: [    0.200444] ACPI: Interpreter enabled
Sep  8 16:13:54 pelle kernel: [    0.200465] ACPI: (supports S0 S3 S4 S5)
Sep  8 16:13:54 pelle kernel: [    0.200537] ACPI: Using IOAPIC for interrupt routing
Sep  8 16:13:54 pelle kernel: [    0.214299] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Sep  8 16:13:54 pelle kernel: [    0.214968] ACPI: No dock devices found.
Sep  8 16:13:54 pelle kernel: [    0.216765] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.216790] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.216813] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
Sep  8 16:13:54 pelle kernel: [    0.216886] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep  8 16:13:54 pelle kernel: [    0.217094] pci 0000:00:02.0: reg 10 32bit mmio: [0x58480000-0x584fffff]
Sep  8 16:13:54 pelle kernel: [    0.217107] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
Sep  8 16:13:54 pelle kernel: [    0.217119] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
Sep  8 16:13:54 pelle kernel: [    0.217132] pci 0000:00:02.0: reg 1c 32bit mmio: [0x58500000-0x5853ffff]
Sep  8 16:13:54 pelle kernel: [    0.217200] pci 0000:00:02.1: reg 10 32bit mmio: [0x58400000-0x5847ffff]
Sep  8 16:13:54 pelle kernel: [    0.217365] pci 0000:00:1b.0: reg 10 64bit mmio: [0x58540000-0x58543fff]
Sep  8 16:13:54 pelle kernel: [    0.217448] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep  8 16:13:54 pelle kernel: [    0.217459] pci 0000:00:1b.0: PME# disabled
Sep  8 16:13:54 pelle kernel: [    0.217589] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep  8 16:13:54 pelle kernel: [    0.217601] pci 0000:00:1c.0: PME# disabled
Sep  8 16:13:54 pelle kernel: [    0.217742] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep  8 16:13:54 pelle kernel: [    0.217753] pci 0000:00:1c.1: PME# disabled
Sep  8 16:13:54 pelle kernel: [    0.217886] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Sep  8 16:13:54 pelle kernel: [    0.217896] pci 0000:00:1c.2: PME# disabled
Sep  8 16:13:54 pelle kernel: [    0.218027] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Sep  8 16:13:54 pelle kernel: [    0.218037] pci 0000:00:1c.3: PME# disabled
Sep  8 16:13:54 pelle kernel: [    0.218131] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
Sep  8 16:13:54 pelle kernel: [    0.218223] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
Sep  8 16:13:54 pelle kernel: [    0.218316] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
Sep  8 16:13:54 pelle kernel: [    0.218418] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
Sep  8 16:13:54 pelle kernel: [    0.218527] pci 0000:00:1d.7: reg 10 32bit mmio: [0x58544400-0x585447ff]
Sep  8 16:13:54 pelle kernel: [    0.218613] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Sep  8 16:13:54 pelle kernel: [    0.218624] pci 0000:00:1d.7: PME# disabled
Sep  8 16:13:54 pelle kernel: [    0.218859] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Sep  8 16:13:54 pelle kernel: [    0.218871] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Sep  8 16:13:54 pelle kernel: [    0.218889] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
Sep  8 16:13:54 pelle kernel: [    0.218982] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
Sep  8 16:13:54 pelle kernel: [    0.218998] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
Sep  8 16:13:54 pelle kernel: [    0.219012] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
Sep  8 16:13:54 pelle kernel: [    0.219027] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
Sep  8 16:13:54 pelle kernel: [    0.219044] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
Sep  8 16:13:54 pelle kernel: [    0.219095] pci 0000:00:1f.2: PME# supported from D3hot
Sep  8 16:13:54 pelle kernel: [    0.219105] pci 0000:00:1f.2: PME# disabled
Sep  8 16:13:54 pelle kernel: [    0.219192] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
Sep  8 16:13:54 pelle kernel: [    0.219336] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
Sep  8 16:13:54 pelle kernel: [    0.219349] pci 0000:00:1c.0: bridge 32bit mmio: [0x57300000-0x583fffff]
Sep  8 16:13:54 pelle kernel: [    0.219365] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
Sep  8 16:13:54 pelle kernel: [    0.219456] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
Sep  8 16:13:54 pelle kernel: [    0.219494] pci 0000:02:00.0: reg 18 64bit mmio pref: [0x51010000-0x51010fff]
Sep  8 16:13:54 pelle kernel: [    0.219522] pci 0000:02:00.0: reg 20 64bit mmio pref: [0x51000000-0x5100ffff]
Sep  8 16:13:54 pelle kernel: [    0.219540] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
Sep  8 16:13:54 pelle kernel: [    0.219612] pci 0000:02:00.0: supports D1 D2
Sep  8 16:13:54 pelle kernel: [    0.219619] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep  8 16:13:54 pelle kernel: [    0.219633] pci 0000:02:00.0: PME# disabled
Sep  8 16:13:54 pelle kernel: [    0.219745] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
Sep  8 16:13:54 pelle kernel: [    0.219756] pci 0000:00:1c.1: bridge 32bit mmio: [0x56300000-0x572fffff]
Sep  8 16:13:54 pelle kernel: [    0.219772] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
Sep  8 16:13:54 pelle kernel: [    0.219937] pci 0000:03:00.0: reg 10 64bit mmio: [0x55200000-0x5520ffff]
Sep  8 16:13:54 pelle kernel: [    0.220323] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
Sep  8 16:13:54 pelle kernel: [    0.220336] pci 0000:00:1c.2: bridge 32bit mmio: [0x55200000-0x562fffff]
Sep  8 16:13:54 pelle kernel: [    0.220351] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52100000-0x530fffff]
Sep  8 16:13:54 pelle kernel: [    0.220439] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
Sep  8 16:13:54 pelle kernel: [    0.220450] pci 0000:00:1c.3: bridge 32bit mmio: [0x54100000-0x551fffff]
Sep  8 16:13:54 pelle kernel: [    0.220466] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53100000-0x540fffff]
Sep  8 16:13:54 pelle kernel: [    0.220555] pci 0000:00:1e.0: transparent bridge
Sep  8 16:13:54 pelle kernel: [    0.220615] pci_bus 0000:00: on NUMA node 0
Sep  8 16:13:54 pelle kernel: [    0.220638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep  8 16:13:54 pelle kernel: [    0.221150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
Sep  8 16:13:54 pelle kernel: [    0.221549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
Sep  8 16:13:54 pelle kernel: [    0.221856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
Sep  8 16:13:54 pelle kernel: [    0.222094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
Sep  8 16:13:54 pelle kernel: [    0.222324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
Sep  8 16:13:54 pelle kernel: [    0.222913] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.222934] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.235524] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 16:13:54 pelle kernel: [    0.235841] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 16:13:54 pelle kernel: [    0.236187] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 16:13:54 pelle kernel: [    0.236505] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 16:13:54 pelle kernel: [    0.236809] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 16:13:54 pelle kernel: [    0.237130] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 16:13:54 pelle kernel: [    0.237438] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 16:13:54 pelle kernel: [    0.237744] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 16:13:54 pelle kernel: [    0.238112] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep  8 16:13:54 pelle kernel: [    0.238145] vgaarb: loaded
Sep  8 16:13:54 pelle kernel: [    0.238496] SCSI subsystem initialized
Sep  8 16:13:54 pelle kernel: [    0.238740] libata version 3.00 loaded.
Sep  8 16:13:54 pelle kernel: [    0.239010] usbcore: registered new interface driver usbfs
Sep  8 16:13:54 pelle kernel: [    0.239063] usbcore: registered new interface driver hub
Sep  8 16:13:54 pelle kernel: [    0.239164] usbcore: registered new device driver usb
Sep  8 16:13:54 pelle kernel: [    0.239829] ACPI: WMI: Mapper loaded
Sep  8 16:13:54 pelle kernel: [    0.239836] PCI: Using ACPI for IRQ routing
Sep  8 16:13:54 pelle kernel: [    0.240320] NetLabel: Initializing
Sep  8 16:13:54 pelle kernel: [    0.240327] NetLabel:  domain hash size = 128
Sep  8 16:13:54 pelle kernel: [    0.240332] NetLabel:  protocols = UNLABELED CIPSOv4
Sep  8 16:13:54 pelle kernel: [    0.240365] NetLabel:  unlabeled traffic allowed by default
Sep  8 16:13:54 pelle kernel: [    0.240476] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep  8 16:13:54 pelle kernel: [    0.240492] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Sep  8 16:13:54 pelle kernel: [    0.244446] Switching to clocksource tsc
Sep  8 16:13:54 pelle kernel: [    0.249026] AppArmor: AppArmor Filesystem Enabled
Sep  8 16:13:54 pelle kernel: [    0.249067] pnp: PnP ACPI init
Sep  8 16:13:54 pelle kernel: [    0.249109] ACPI: bus type pnp registered
Sep  8 16:13:54 pelle kernel: [    0.251793] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
Sep  8 16:13:54 pelle kernel: [    0.253502] pnp: PnP ACPI: found 9 devices
Sep  8 16:13:54 pelle kernel: [    0.253512] ACPI: ACPI bus type pnp unregistered
Sep  8 16:13:54 pelle kernel: [    0.253521] PnPBIOS: Disabled by ACPI PNP
Sep  8 16:13:54 pelle kernel: [    0.253554] system 00:01: ioport range 0x200-0x20f has been reserved
Sep  8 16:13:54 pelle kernel: [    0.253568] system 00:01: ioport range 0x600-0x60f has been reserved
Sep  8 16:13:54 pelle kernel: [    0.253577] system 00:01: ioport range 0x610-0x610 has been reserved
Sep  8 16:13:54 pelle kernel: [    0.253587] system 00:01: ioport range 0x800-0x80f has been reserved
Sep  8 16:13:54 pelle kernel: [    0.253596] system 00:01: ioport range 0x400-0x47f has been reserved
Sep  8 16:13:54 pelle kernel: [    0.253606] system 00:01: ioport range 0x500-0x53f has been reserved
Sep  8 16:13:54 pelle kernel: [    0.253618] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Sep  8 16:13:54 pelle kernel: [    0.253629] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Sep  8 16:13:54 pelle kernel: [    0.253639] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Sep  8 16:13:54 pelle kernel: [    0.253649] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Sep  8 16:13:54 pelle kernel: [    0.253660] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Sep  8 16:13:54 pelle kernel: [    0.253671] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Sep  8 16:13:54 pelle kernel: [    0.253681] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Sep  8 16:13:54 pelle kernel: [    0.288856] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
Sep  8 16:13:54 pelle kernel: [    0.288948] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Sep  8 16:13:54 pelle kernel: [    0.288958] pci 0000:00:1c.0:   IO window: 0x5000-0x5fff
Sep  8 16:13:54 pelle kernel: [    0.288971] pci 0000:00:1c.0:   MEM window: 0x57300000-0x583fffff
Sep  8 16:13:54 pelle kernel: [    0.288983] pci 0000:00:1c.0:   PREFETCH window: 0x00000050000000-0x00000050ffffff
Sep  8 16:13:54 pelle kernel: [    0.289003] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Sep  8 16:13:54 pelle kernel: [    0.289012] pci 0000:00:1c.1:   IO window: 0x3000-0x4fff
Sep  8 16:13:54 pelle kernel: [    0.289025] pci 0000:00:1c.1:   MEM window: 0x56300000-0x572fffff
Sep  8 16:13:54 pelle kernel: [    0.289036] pci 0000:00:1c.1:   PREFETCH window: 0x00000051000000-0x000000520fffff
Sep  8 16:13:54 pelle kernel: [    0.289052] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
Sep  8 16:13:54 pelle kernel: [    0.289061] pci 0000:00:1c.2:   IO window: 0x2000-0x2fff
Sep  8 16:13:54 pelle kernel: [    0.289074] pci 0000:00:1c.2:   MEM window: 0x55200000-0x562fffff
Sep  8 16:13:54 pelle kernel: [    0.289085] pci 0000:00:1c.2:   PREFETCH window: 0x00000052100000-0x000000530fffff
Sep  8 16:13:54 pelle kernel: [    0.289100] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
Sep  8 16:13:54 pelle kernel: [    0.289110] pci 0000:00:1c.3:   IO window: 0x1000-0x1fff
Sep  8 16:13:54 pelle kernel: [    0.289122] pci 0000:00:1c.3:   MEM window: 0x54100000-0x551fffff
Sep  8 16:13:54 pelle kernel: [    0.289133] pci 0000:00:1c.3:   PREFETCH window: 0x00000053100000-0x000000540fffff
Sep  8 16:13:54 pelle kernel: [    0.289149] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
Sep  8 16:13:54 pelle kernel: [    0.289155] pci 0000:00:1e.0:   IO window: disabled
Sep  8 16:13:54 pelle kernel: [    0.289166] pci 0000:00:1e.0:   MEM window: disabled
Sep  8 16:13:54 pelle kernel: [    0.289176] pci 0000:00:1e.0:   PREFETCH window: disabled
Sep  8 16:13:54 pelle kernel: [    0.289214]   alloc irq_desc for 16 on node -1
Sep  8 16:13:54 pelle kernel: [    0.289221]   alloc kstat_irqs on node -1
Sep  8 16:13:54 pelle kernel: [    0.289238] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 16:13:54 pelle kernel: [    0.289252] pci 0000:00:1c.0: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.289273]   alloc irq_desc for 17 on node -1
Sep  8 16:13:54 pelle kernel: [    0.289279]   alloc kstat_irqs on node -1
Sep  8 16:13:54 pelle kernel: [    0.289291] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 16:13:54 pelle kernel: [    0.289303] pci 0000:00:1c.1: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.289323]   alloc irq_desc for 18 on node -1
Sep  8 16:13:54 pelle kernel: [    0.289328]   alloc kstat_irqs on node -1
Sep  8 16:13:54 pelle kernel: [    0.289339] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 16:13:54 pelle kernel: [    0.289351] pci 0000:00:1c.2: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.289370]   alloc irq_desc for 19 on node -1
Sep  8 16:13:54 pelle kernel: [    0.289376]   alloc kstat_irqs on node -1
Sep  8 16:13:54 pelle kernel: [    0.289387] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 16:13:54 pelle kernel: [    0.289399] pci 0000:00:1c.3: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.289416] pci 0000:00:1e.0: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.289427] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Sep  8 16:13:54 pelle kernel: [    0.289435] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Sep  8 16:13:54 pelle kernel: [    0.289444] pci_bus 0000:01: resource 0 io:  [0x5000-0x5fff]
Sep  8 16:13:54 pelle kernel: [    0.289453] pci_bus 0000:01: resource 1 mem: [0x57300000-0x583fffff]
Sep  8 16:13:54 pelle kernel: [    0.289461] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
Sep  8 16:13:54 pelle kernel: [    0.289470] pci_bus 0000:02: resource 0 io:  [0x3000-0x4fff]
Sep  8 16:13:54 pelle kernel: [    0.289479] pci_bus 0000:02: resource 1 mem: [0x56300000-0x572fffff]
Sep  8 16:13:54 pelle kernel: [    0.289488] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x520fffff]
Sep  8 16:13:54 pelle kernel: [    0.289497] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
Sep  8 16:13:54 pelle kernel: [    0.289505] pci_bus 0000:03: resource 1 mem: [0x55200000-0x562fffff]
Sep  8 16:13:54 pelle kernel: [    0.289513] pci_bus 0000:03: resource 2 pref mem [0x52100000-0x530fffff]
Sep  8 16:13:54 pelle kernel: [    0.289522] pci_bus 0000:04: resource 0 io:  [0x1000-0x1fff]
Sep  8 16:13:54 pelle kernel: [    0.289531] pci_bus 0000:04: resource 1 mem: [0x54100000-0x551fffff]
Sep  8 16:13:54 pelle kernel: [    0.289540] pci_bus 0000:04: resource 2 pref mem [0x53100000-0x540fffff]
Sep  8 16:13:54 pelle kernel: [    0.289550] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
Sep  8 16:13:54 pelle kernel: [    0.289559] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
Sep  8 16:13:54 pelle kernel: [    0.289664] NET: Registered protocol family 2
Sep  8 16:13:54 pelle kernel: [    0.289948] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep  8 16:13:54 pelle kernel: [    0.290952] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep  8 16:13:54 pelle kernel: [    0.292169] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep  8 16:13:54 pelle kernel: [    0.292731] TCP: Hash tables configured (established 131072 bind 65536)
Sep  8 16:13:54 pelle kernel: [    0.292740] TCP reno registered
Sep  8 16:13:54 pelle kernel: [    0.293070] NET: Registered protocol family 1
Sep  8 16:13:54 pelle kernel: [    0.293129] pci 0000:00:02.0: Boot video device
Sep  8 16:13:54 pelle kernel: [    0.293461] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Sep  8 16:13:54 pelle kernel: [    0.293469] Simple Boot Flag at 0x44 set to 0x1
Sep  8 16:13:54 pelle kernel: [    0.293990] cpufreq-nforce2: No nForce2 chipset.
Sep  8 16:13:54 pelle kernel: [    0.294075] Scanning for low memory corruption every 60 seconds
Sep  8 16:13:54 pelle kernel: [    0.294411] audit: initializing netlink socket (disabled)
Sep  8 16:13:54 pelle kernel: [    0.294439] type=2000 audit(1283951622.290:1): initialized
Sep  8 16:13:54 pelle kernel: [    0.316108] highmem bounce pool size: 64 pages
Sep  8 16:13:54 pelle kernel: [    0.316127] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Sep  8 16:13:54 pelle kernel: [    0.321497] VFS: Disk quotas dquot_6.5.2
Sep  8 16:13:54 pelle kernel: [    0.321692] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep  8 16:13:54 pelle kernel: [    0.323806] fuse init (API version 7.13)
Sep  8 16:13:54 pelle kernel: [    0.324122] msgmni has been set to 1714
Sep  8 16:13:54 pelle kernel: [    0.324836] alg: No test for stdrng (krng)
Sep  8 16:13:54 pelle kernel: [    0.325049] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep  8 16:13:54 pelle kernel: [    0.325058] io scheduler noop registered
Sep  8 16:13:54 pelle kernel: [    0.325064] io scheduler anticipatory registered
Sep  8 16:13:54 pelle kernel: [    0.325070] io scheduler deadline registered
Sep  8 16:13:54 pelle kernel: [    0.325209] io scheduler cfq registered (default)
Sep  8 16:13:54 pelle kernel: [    0.325570]   alloc irq_desc for 24 on node -1
Sep  8 16:13:54 pelle kernel: [    0.325578]   alloc kstat_irqs on node -1
Sep  8 16:13:54 pelle kernel: [    0.325602] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
Sep  8 16:13:54 pelle kernel: [    0.325622] pcieport 0000:00:1c.0: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.325899]   alloc irq_desc for 25 on node -1
Sep  8 16:13:54 pelle kernel: [    0.325906]   alloc kstat_irqs on node -1
Sep  8 16:13:54 pelle kernel: [    0.325924] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
Sep  8 16:13:54 pelle kernel: [    0.325942] pcieport 0000:00:1c.1: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.326233]   alloc irq_desc for 26 on node -1
Sep  8 16:13:54 pelle kernel: [    0.326240]   alloc kstat_irqs on node -1
Sep  8 16:13:54 pelle kernel: [    0.326260] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
Sep  8 16:13:54 pelle kernel: [    0.326280] pcieport 0000:00:1c.2: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.326554]   alloc irq_desc for 27 on node -1
Sep  8 16:13:54 pelle kernel: [    0.326561]   alloc kstat_irqs on node -1
Sep  8 16:13:54 pelle kernel: [    0.326579] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
Sep  8 16:13:54 pelle kernel: [    0.326629] pcieport 0000:00:1c.3: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.326884] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  8 16:13:54 pelle kernel: [    0.327199] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.327223] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.327582] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.327603] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.327928] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.327947] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.328279] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.328298] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.328685] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.328705] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.329044] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.329066] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.329401] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.329420] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.329737] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.329756] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:13:54 pelle kernel: [    0.329883] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep  8 16:13:54 pelle kernel: [    0.330517] ACPI: AC Adapter [ACAD] (on-line)
Sep  8 16:13:54 pelle kernel: [    0.330821] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Sep  8 16:13:54 pelle kernel: [    0.330833] ACPI: Power Button [PWRB]
Sep  8 16:13:54 pelle kernel: [    0.330971] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Sep  8 16:13:54 pelle kernel: [    0.331376] ACPI: Lid Switch [LID0]
Sep  8 16:13:54 pelle kernel: [    0.331544] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Sep  8 16:13:54 pelle kernel: [    0.331555] ACPI: Sleep Button [SLPB]
Sep  8 16:13:54 pelle kernel: [    0.331733] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Sep  8 16:13:54 pelle kernel: [    0.331742] ACPI: Power Button [PWRF]
Sep  8 16:13:54 pelle kernel: [    0.333657] ACPI: SSDT 3f380c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
Sep  8 16:13:54 pelle kernel: [    0.334725] ACPI: SSDT 3f37fe10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
Sep  8 16:13:54 pelle kernel: [    0.335656] Marking TSC unstable due to TSC halts in idle
Sep  8 16:13:54 pelle kernel: [    0.335913] processor LNXCPU:00: registered as cooling_device0
Sep  8 16:13:54 pelle kernel: [    0.336978] ACPI: SSDT 3f380f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
Sep  8 16:13:54 pelle kernel: [    0.337942] ACPI: SSDT 3f37ef10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
Sep  8 16:13:54 pelle kernel: [    0.338678] Switching to clocksource hpet
Sep  8 16:13:54 pelle kernel: [    0.339192] processor LNXCPU:01: registered as cooling_device1
Sep  8 16:13:54 pelle kernel: [    0.348251] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Sep  8 16:13:54 pelle kernel: [    0.352497] brd: module loaded
Sep  8 16:13:54 pelle kernel: [    0.353229] ACPI: Battery Slot [BAT1] (battery absent)
Sep  8 16:13:54 pelle kernel: [    0.353265] isapnp: Scanning for PnP cards...
Sep  8 16:13:54 pelle kernel: [    0.403709] loop: module loaded
Sep  8 16:13:54 pelle kernel: [    0.404014] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Sep  8 16:13:54 pelle kernel: [    0.404299] ata_piix 0000:00:1f.2: version 2.13
Sep  8 16:13:54 pelle kernel: [    0.404336] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 16:13:54 pelle kernel: [    0.404349] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Sep  8 16:13:54 pelle kernel: [    0.404437] ata_piix 0000:00:1f.2: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.448203] scsi0 : ata_piix
Sep  8 16:13:54 pelle kernel: [    0.492444] scsi1 : ata_piix
Sep  8 16:13:54 pelle kernel: [    0.495086] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
Sep  8 16:13:54 pelle kernel: [    0.495096] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
Sep  8 16:13:54 pelle kernel: [    0.496257] Fixed MDIO Bus: probed
Sep  8 16:13:54 pelle kernel: [    0.496368] PPP generic driver version 2.4.2
Sep  8 16:13:54 pelle kernel: [    0.496514] tun: Universal TUN/TAP device driver, 1.6
Sep  8 16:13:54 pelle kernel: [    0.496520] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep  8 16:13:54 pelle kernel: [    0.496771] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep  8 16:13:54 pelle kernel: [    0.496827] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 16:13:54 pelle kernel: [    0.496861] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.496870] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep  8 16:13:54 pelle kernel: [    0.496969] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep  8 16:13:54 pelle kernel: [    0.497013] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Sep  8 16:13:54 pelle kernel: [    0.497034] ehci_hcd 0000:00:1d.7: debug port 1
Sep  8 16:13:54 pelle kernel: [    0.500935] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Sep  8 16:13:54 pelle kernel: [    0.500978] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
Sep  8 16:13:54 pelle kernel: [    0.516223] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Sep  8 16:13:54 pelle kernel: [    0.516558] usb usb1: configuration #1 chosen from 1 choice
Sep  8 16:13:54 pelle kernel: [    0.516647] hub 1-0:1.0: USB hub found
Sep  8 16:13:54 pelle kernel: [    0.516671] hub 1-0:1.0: 8 ports detected
Sep  8 16:13:54 pelle kernel: [    0.516865] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep  8 16:13:54 pelle kernel: [    0.516917] uhci_hcd: USB Universal Host Controller Interface driver
Sep  8 16:13:54 pelle kernel: [    0.517007] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 16:13:54 pelle kernel: [    0.517031] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.517040] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep  8 16:13:54 pelle kernel: [    0.517155] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep  8 16:13:54 pelle kernel: [    0.517202] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
Sep  8 16:13:54 pelle kernel: [    0.517456] usb usb2: configuration #1 chosen from 1 choice
Sep  8 16:13:54 pelle kernel: [    0.517548] hub 2-0:1.0: USB hub found
Sep  8 16:13:54 pelle kernel: [    0.517568] hub 2-0:1.0: 2 ports detected
Sep  8 16:13:54 pelle kernel: [    0.517685] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 16:13:54 pelle kernel: [    0.517700] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.517708] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep  8 16:13:54 pelle kernel: [    0.517806] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep  8 16:13:54 pelle kernel: [    0.517869] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
Sep  8 16:13:54 pelle kernel: [    0.518129] usb usb3: configuration #1 chosen from 1 choice
Sep  8 16:13:54 pelle kernel: [    0.518226] hub 3-0:1.0: USB hub found
Sep  8 16:13:54 pelle kernel: [    0.518245] hub 3-0:1.0: 2 ports detected
Sep  8 16:13:54 pelle kernel: [    0.518363] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 16:13:54 pelle kernel: [    0.518378] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.518386] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep  8 16:13:54 pelle kernel: [    0.518491] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep  8 16:13:54 pelle kernel: [    0.518549] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
Sep  8 16:13:54 pelle kernel: [    0.518815] usb usb4: configuration #1 chosen from 1 choice
Sep  8 16:13:54 pelle kernel: [    0.518894] hub 4-0:1.0: USB hub found
Sep  8 16:13:54 pelle kernel: [    0.518914] hub 4-0:1.0: 2 ports detected
Sep  8 16:13:54 pelle kernel: [    0.519026] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 16:13:54 pelle kernel: [    0.519041] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    0.519049] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep  8 16:13:54 pelle kernel: [    0.519140] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep  8 16:13:54 pelle kernel: [    0.519196] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
Sep  8 16:13:54 pelle kernel: [    0.519444] usb usb5: configuration #1 chosen from 1 choice
Sep  8 16:13:54 pelle kernel: [    0.519524] hub 5-0:1.0: USB hub found
Sep  8 16:13:54 pelle kernel: [    0.519543] hub 5-0:1.0: 2 ports detected
Sep  8 16:13:54 pelle kernel: [    0.519782] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Sep  8 16:13:54 pelle kernel: [    0.523298] i8042.c: Warning: Keylock active.
Sep  8 16:13:54 pelle kernel: [    0.541177] i8042.c: Detected active multiplexing controller, rev 1.1.
Sep  8 16:13:54 pelle kernel: [    0.553519] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  8 16:13:54 pelle kernel: [    0.553547] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Sep  8 16:13:54 pelle kernel: [    0.553654] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Sep  8 16:13:54 pelle kernel: [    0.553729] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Sep  8 16:13:54 pelle kernel: [    0.553811] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Sep  8 16:13:54 pelle kernel: [    0.554208] mice: PS/2 mouse device common for all mice
Sep  8 16:13:54 pelle kernel: [    0.554653] rtc_cmos 00:03: RTC can wake from S4
Sep  8 16:13:54 pelle kernel: [    0.554770] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep  8 16:13:54 pelle kernel: [    0.554820] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Sep  8 16:13:54 pelle kernel: [    0.555157] device-mapper: uevent: version 1.0.3
Sep  8 16:13:54 pelle kernel: [    0.578146] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Sep  8 16:13:54 pelle kernel: [    0.579849] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Sep  8 16:13:54 pelle kernel: [    0.616649] device-mapper: multipath: version 1.1.0 loaded
Sep  8 16:13:54 pelle kernel: [    0.616660] device-mapper: multipath round-robin: version 1.0.0 loaded
Sep  8 16:13:54 pelle kernel: [    0.623426] EISA: Probing bus 0 at eisa.0
Sep  8 16:13:54 pelle kernel: [    0.623443] Cannot allocate resource for EISA slot 1
Sep  8 16:13:54 pelle kernel: [    0.623450] Cannot allocate resource for EISA slot 2
Sep  8 16:13:54 pelle kernel: [    0.623456] Cannot allocate resource for EISA slot 3
Sep  8 16:13:54 pelle kernel: [    0.623462] Cannot allocate resource for EISA slot 4
Sep  8 16:13:54 pelle kernel: [    0.623468] Cannot allocate resource for EISA slot 5
Sep  8 16:13:54 pelle kernel: [    0.623475] Cannot allocate resource for EISA slot 6
Sep  8 16:13:54 pelle kernel: [    0.623492] EISA: Detected 0 cards.
Sep  8 16:13:54 pelle kernel: [    0.666907] cpuidle: using governor ladder
Sep  8 16:13:54 pelle kernel: [    0.667248] cpuidle: using governor menu
Sep  8 16:13:54 pelle kernel: [    0.668563] TCP cubic registered
Sep  8 16:13:54 pelle kernel: [    0.669114] NET: Registered protocol family 10
Sep  8 16:13:54 pelle kernel: [    0.670408] lo: Disabled Privacy Extensions
Sep  8 16:13:54 pelle kernel: [    0.671339] NET: Registered protocol family 17
Sep  8 16:13:54 pelle kernel: [    0.672436] Using IPI No-Shortcut mode
Sep  8 16:13:54 pelle kernel: [    0.672700] PM: Resume from disk failed.
Sep  8 16:13:54 pelle kernel: [    0.672739] registered taskstats version 1
Sep  8 16:13:54 pelle kernel: [    0.673493]   Magic number: 10:165:230
Sep  8 16:13:54 pelle kernel: [    0.673651] rtc_cmos 00:03: setting system clock to 2010-09-08 13:13:43 UTC (1283951623)
Sep  8 16:13:54 pelle kernel: [    0.673660] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep  8 16:13:54 pelle kernel: [    0.673665] EDD information not available.
Sep  8 16:13:54 pelle kernel: [    0.694332] Freeing initrd memory: 7784k freed
Sep  8 16:13:54 pelle kernel: [    0.710220] isapnp: No Plug & Play device found
Sep  8 16:13:54 pelle kernel: [    0.710905] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
Sep  8 16:13:54 pelle kernel: [    0.710921] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep  8 16:13:54 pelle kernel: [    0.724873] ata1.00: configured for UDMA/133
Sep  8 16:13:54 pelle kernel: [    0.725308] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
Sep  8 16:13:54 pelle kernel: [    0.725679] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Sep  8 16:13:54 pelle kernel: [    0.725751] sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep  8 16:13:54 pelle kernel: [    0.725864] sd 0:0:0:0: [sda] Write Protect is off
Sep  8 16:13:54 pelle kernel: [    0.725874] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  8 16:13:54 pelle kernel: [    0.725964] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  8 16:13:54 pelle kernel: [    0.726331]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Sep  8 16:13:54 pelle kernel: [    0.794587] sd 0:0:0:0: [sda] Attached SCSI disk
Sep  8 16:13:54 pelle kernel: [    0.794661] Freeing unused kernel memory: 660k freed
Sep  8 16:13:54 pelle kernel: [    0.795244] Write protecting the kernel text: 4680k
Sep  8 16:13:54 pelle kernel: [    0.795326] Write protecting the kernel read-only data: 1844k
Sep  8 16:13:54 pelle kernel: [    0.828136] usb 1-5: new high speed USB device using ehci_hcd and address 2
Sep  8 16:13:54 pelle kernel: [    0.835172] udev: starting version 151
Sep  8 16:13:54 pelle kernel: [    1.135317] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep  8 16:13:54 pelle kernel: [    1.135365] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep  8 16:13:54 pelle kernel: [    1.135446] r8169 0000:02:00.0: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [    1.135526]   alloc irq_desc for 28 on node -1
Sep  8 16:13:54 pelle kernel: [    1.135533]   alloc kstat_irqs on node -1
Sep  8 16:13:54 pelle kernel: [    1.135564] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
Sep  8 16:13:54 pelle kernel: [    1.137615] eth0: RTL8102e at 0xf804e000, 00:23:8b:0a:17:9d, XID 04a00000 IRQ 28
Sep  8 16:13:54 pelle kernel: [    1.172524] usb 1-5: configuration #1 chosen from 1 choice
Sep  8 16:13:54 pelle kernel: [    1.632099] usb 4-2: new full speed USB device using uhci_hcd and address 2
Sep  8 16:13:54 pelle kernel: [    1.644264] EXT4-fs (sda1): mounted filesystem with ordered data mode
Sep  8 16:13:54 pelle kernel: [    1.794001] usb 4-2: configuration #1 chosen from 1 choice
Sep  8 16:13:54 pelle kernel: [    9.447024] udev: starting version 151
Sep  8 16:13:54 pelle kernel: [    9.470089] Adding 975864k swap on /dev/sda5.  Priority:-1 extents:1 across:975864k 
Sep  8 16:13:54 pelle kernel: [    9.669185] lp: driver loaded but no devices found
Sep  8 16:13:54 pelle kernel: [    9.952266] Linux agpgart interface v0.103
Sep  8 16:13:54 pelle kernel: [   10.017082] intel_rng: FWH not detected
Sep  8 16:13:54 pelle kernel: [   10.060909] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Sep  8 16:13:54 pelle kernel: [   10.061127] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
Sep  8 16:13:54 pelle kernel: [   10.153151] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
Sep  8 16:13:54 pelle kernel: [   10.153409] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Sep  8 16:13:54 pelle kernel: [   10.179129] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Sep  8 16:13:54 pelle kernel: [   10.275232] hso: /build/buildd/linux-2.6.32/drivers/net/usb/hso.c: 1.2 Option Wireless
Sep  8 16:13:54 pelle kernel: [   10.276501] hso0: Disabled Privacy Extensions
Sep  8 16:13:54 pelle kernel: [   10.278272] usbcore: registered new interface driver hso
Sep  8 16:13:54 pelle kernel: [   10.324114] Linux video capture interface: v2.00
Sep  8 16:13:54 pelle kernel: [   10.352378] type=1505 audit(1283951633.175:2):  operation="profile_load" pid=558 name="/sbin/dhclient3"
Sep  8 16:13:54 pelle kernel: [   10.353293] type=1505 audit(1283951633.179:3):  operation="profile_load" pid=558 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 16:13:54 pelle kernel: [   10.353766] type=1505 audit(1283951633.179:4):  operation="profile_load" pid=558 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 16:13:54 pelle kernel: [   10.417768] cfg80211: Calling CRDA to update world regulatory domain
Sep  8 16:13:54 pelle kernel: [   10.532776] acer-wmi: Acer Laptop ACPI-WMI Extras
Sep  8 16:13:54 pelle kernel: [   10.532790] acer-wmi: Blacklisted hardware detected - not loading
Sep  8 16:13:54 pelle kernel: [   10.538522] cfg80211: World regulatory domain updated:
Sep  8 16:13:54 pelle kernel: [   10.538533] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep  8 16:13:54 pelle kernel: [   10.538544] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 16:13:54 pelle kernel: [   10.538554] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 16:13:54 pelle kernel: [   10.538563] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 16:13:54 pelle kernel: [   10.538572] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 16:13:54 pelle kernel: [   10.538581] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 16:13:54 pelle kernel: [   10.560987] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Sep  8 16:13:54 pelle kernel: [   10.567322] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
Sep  8 16:13:54 pelle kernel: [   10.567899] usbcore: registered new interface driver uvcvideo
Sep  8 16:13:54 pelle kernel: [   10.568587] USB Video Class driver (v0.1.0)
Sep  8 16:13:54 pelle kernel: [   10.672546] [drm] Initialized drm 1.1.0 20060810
Sep  8 16:13:54 pelle kernel: [   10.720285] acerhdf: Acer Aspire One Fan driver, v.0.5.20
Sep  8 16:13:54 pelle kernel: [   10.720300] acerhdf: Fan control off, to enable do:
Sep  8 16:13:54 pelle kernel: [   10.720307] acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
Sep  8 16:13:54 pelle kernel: [   10.903515] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 16:13:54 pelle kernel: [   10.903531] i915 0000:00:02.0: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [   10.933860] mtrr: no more MTRRs available
Sep  8 16:13:54 pelle kernel: [   10.933871] [drm] MTRR allocation failed.  Graphics performance may suffer.
Sep  8 16:13:54 pelle kernel: [   10.945907] [drm] set up 7M of stolen space
Sep  8 16:13:54 pelle kernel: [   11.050000] [drm] initialized overlay support
Sep  8 16:13:54 pelle kernel: [   11.086916] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
Sep  8 16:13:54 pelle kernel: [   11.143609] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Sep  8 16:13:54 pelle kernel: [   11.429981] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Sep  8 16:13:54 pelle kernel: [   11.430024] ath5k 0000:03:00.0: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [   11.430117] ath5k 0000:03:00.0: registered as 'phy0'
Sep  8 16:13:54 pelle kernel: [   11.616048] fb0: inteldrmfb frame buffer device
Sep  8 16:13:54 pelle kernel: [   11.616056] registered panic notifier
Sep  8 16:13:54 pelle kernel: [   11.616078] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep  8 16:13:54 pelle kernel: [   11.616218] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 16:13:54 pelle kernel: [   11.616271] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep  8 16:13:54 pelle kernel: [   11.623699] vga16fb: initializing
Sep  8 16:13:54 pelle kernel: [   11.623709] vga16fb: mapped to 0xc00a0000
Sep  8 16:13:54 pelle kernel: [   11.623719] vga16fb: not registering due to another framebuffer present
Sep  8 16:13:54 pelle kernel: [   11.664872] type=1505 audit(1283951634.487:5):  operation="profile_load" pid=736 name="/usr/share/gdm/guest-session/Xsession"
Sep  8 16:13:54 pelle kernel: [   11.671804] type=1505 audit(1283951634.495:6):  operation="profile_replace" pid=737 name="/sbin/dhclient3"
Sep  8 16:13:54 pelle kernel: [   11.672539] type=1505 audit(1283951634.495:7):  operation="profile_replace" pid=737 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 16:13:54 pelle kernel: [   11.672964] type=1505 audit(1283951634.495:8):  operation="profile_replace" pid=737 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 16:13:54 pelle kernel: [   11.684172] type=1505 audit(1283951634.507:9):  operation="profile_load" pid=738 name="/usr/bin/evince"
Sep  8 16:13:54 pelle kernel: [   11.693255] type=1505 audit(1283951634.519:10):  operation="profile_load" pid=738 name="/usr/bin/evince-previewer"
Sep  8 16:13:54 pelle kernel: [   11.699086] type=1505 audit(1283951634.523:11):  operation="profile_load" pid=738 name="/usr/bin/evince-thumbnailer"
Sep  8 16:13:54 pelle NetworkManager: <info>  starting...
Sep  8 16:13:54 pelle NetworkManager: <info>  Trying to start the modem-manager...
Sep  8 16:13:54 pelle NetworkManager:    SCPlugin-Ifupdown: init!
Sep  8 16:13:54 pelle NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Sep  8 16:13:54 pelle NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Sep  8 16:13:54 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0)
Sep  8 16:13:54 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Sep  8 16:13:54 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0)
Sep  8 16:13:54 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0): no ifupdown configuration found.
Sep  8 16:13:54 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Sep  8 16:13:54 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Sep  8 16:13:54 pelle NetworkManager:    SCPlugin-Ifupdown: end _init.
Sep  8 16:13:54 pelle NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Sep  8 16:13:54 pelle NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep  8 16:13:54 pelle NetworkManager: <info>  Found wwan radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/rfkill/rfkill0) (driver usb)
Sep  8 16:13:54 pelle NetworkManager: <info>  WiFi enabled by radio killswitch; disabled by state file
Sep  8 16:13:54 pelle NetworkManager: <info>  WWAN enabled by radio killswitch; disabled by state file
Sep  8 16:13:54 pelle NetworkManager:    SCPlugin-Ifupdown: (162140400) ... get_connections.
Sep  8 16:13:54 pelle NetworkManager:    SCPlugin-Ifupdown: (162140400) ... get_connections (managed=false): return empty list.
Sep  8 16:13:54 pelle modem-manager: Loaded plugin MotoC
Sep  8 16:13:54 pelle modem-manager: Loaded plugin Gobi
Sep  8 16:13:54 pelle modem-manager: Loaded plugin Huawei
Sep  8 16:13:54 pelle modem-manager: Loaded plugin Nokia
Sep  8 16:13:54 pelle modem-manager: Loaded plugin ZTE
Sep  8 16:13:54 pelle modem-manager: Loaded plugin Option
Sep  8 16:13:54 pelle modem-manager: Loaded plugin Sierra
Sep  8 16:13:54 pelle modem-manager: Loaded plugin Novatel
Sep  8 16:13:54 pelle modem-manager: Loaded plugin Ericsson MBM
Sep  8 16:13:54 pelle modem-manager: Loaded plugin Generic
Sep  8 16:13:54 pelle modem-manager: Loaded plugin Option High-Speed
Sep  8 16:13:54 pelle modem-manager: Loaded plugin AnyData
Sep  8 16:13:54 pelle modem-manager: Loaded plugin Longcheer
Sep  8 16:13:54 pelle kernel: [   11.932065] ath: EEPROM regdomain: 0x65
Sep  8 16:13:54 pelle kernel: [   11.932073] ath: EEPROM indicates we should expect a direct regpair map
Sep  8 16:13:54 pelle kernel: [   11.932084] ath: Country alpha2 being used: 00
Sep  8 16:13:54 pelle kernel: [   11.932090] ath: Regpair used: 0x65
Sep  8 16:13:54 pelle NetworkManager:    Ifupdown: get unmanaged devices count: 0
Sep  8 16:13:54 pelle NetworkManager: <info>  (eth0): carrier is OFF
Sep  8 16:13:54 pelle NetworkManager: <info>  (eth0): new Ethernet device (driver: 'r8169')
Sep  8 16:13:54 pelle NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep  8 16:13:54 pelle NetworkManager: <info>  (eth0): now managed
Sep  8 16:13:54 pelle NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Sep  8 16:13:54 pelle NetworkManager: <info>  (eth0): bringing up device.
Sep  8 16:13:54 pelle kernel: [   11.962014] r8169: eth0: link down
Sep  8 16:13:54 pelle kernel: [   11.962650] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep  8 16:13:54 pelle NetworkManager: <info>  (eth0): preparing device.
Sep  8 16:13:54 pelle NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Sep  8 16:13:54 pelle NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0
Sep  8 16:13:54 pelle NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Sep  8 16:13:54 pelle NetworkManager: <info>  modem-manager is now available
Sep  8 16:13:54 pelle NetworkManager: <info>  Trying to start the supplicant...
Sep  8 16:13:54 pelle NetworkManager: <info>  Found wlan radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill1) (driver <unknown>)
Sep  8 16:13:54 pelle kernel: [   12.077300] phy0: Selected rate control algorithm 'minstrel'
Sep  8 16:13:54 pelle kernel: [   12.079844] Registered led device: ath5k-phy0::rx
Sep  8 16:13:54 pelle kernel: [   12.079908] Registered led device: ath5k-phy0::tx
Sep  8 16:13:54 pelle kernel: [   12.079918] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Sep  8 16:13:54 pelle kernel: [   12.133204] Console: switching to colour frame buffer device 128x37
Sep  8 16:13:54 pelle kernel: [   12.136421] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Sep  8 16:13:55 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0)
Sep  8 16:13:55 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Sep  8 16:13:55 pelle NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
Sep  8 16:13:55 pelle modem-manager: (ttyHS0) opening serial device...
Sep  8 16:13:55 pelle modem-manager: (ttyHS0): probe requested by plugin 'Option High-Speed'
Sep  8 16:13:55 pelle modem-manager: (ttyHS1) opening serial device...
Sep  8 16:13:55 pelle modem-manager: (ttyHS1): probe requested by plugin 'Option High-Speed'
Sep  8 16:13:55 pelle modem-manager: (ttyHS2) opening serial device...
Sep  8 16:13:55 pelle modem-manager: (ttyHS2): probe requested by plugin 'Option High-Speed'
Sep  8 16:13:55 pelle modem-manager: (ttyHS3) opening serial device...
Sep  8 16:13:55 pelle modem-manager: (ttyHS3): probe requested by plugin 'Option High-Speed'
Sep  8 16:13:55 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port hso0
Sep  8 16:13:55 pelle modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2
Sep  8 16:13:55 pelle NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'ath5k')
Sep  8 16:13:55 pelle NetworkManager: <info>  (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep  8 16:13:55 pelle NetworkManager: <info>  (wlan0): now managed
Sep  8 16:13:55 pelle NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Sep  8 16:13:55 pelle NetworkManager: <info>  (wlan0): bringing up device.
Sep  8 16:13:55 pelle kernel: [   12.469539] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep  8 16:13:55 pelle NetworkManager: <info>  (wlan0): preparing device.
Sep  8 16:13:55 pelle NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Sep  8 16:13:55 pelle NetworkManager: <info>  WiFi now disabled by radio killswitch
Sep  8 16:13:55 pelle NetworkManager: <WARN>  nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface.
Sep  8 16:13:55 pelle kernel: [   12.957355] ppdev: user-space parallel port driver
Sep  8 16:13:56 pelle kernel: [   13.607202] CPU0 attaching NULL sched-domain.
Sep  8 16:13:56 pelle kernel: [   13.607215] CPU1 attaching NULL sched-domain.
Sep  8 16:13:56 pelle kernel: [   13.637118] CPU0 attaching sched-domain:
Sep  8 16:13:56 pelle kernel: [   13.637127]  domain 0: span 0-1 level SIBLING
Sep  8 16:13:56 pelle kernel: [   13.637134]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 16:13:56 pelle kernel: [   13.637147]   domain 1: span 0-1 level MC
Sep  8 16:13:56 pelle kernel: [   13.637152]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:13:56 pelle kernel: [   13.637164] CPU1 attaching sched-domain:
Sep  8 16:13:56 pelle kernel: [   13.637169]  domain 0: span 0-1 level SIBLING
Sep  8 16:13:56 pelle kernel: [   13.637174]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 16:13:56 pelle kernel: [   13.637186]   domain 1: span 0-1 level MC
Sep  8 16:13:56 pelle kernel: [   13.637191]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:13:58 pelle modem-manager: (ttyHS0) closing serial device...
Sep  8 16:13:58 pelle modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 as /org/freedesktop/ModemManager/Modems/0
Sep  8 16:13:58 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS0
Sep  8 16:13:58 pelle modem-manager: (ttyHS1) closing serial device...
Sep  8 16:13:58 pelle modem-manager: (ttyHS3) closing serial device...
Sep  8 16:13:58 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS1
Sep  8 16:13:58 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS3
Sep  8 16:13:58 pelle NetworkManager: <info>  (hso0): new GSM device (driver: 'hso')
Sep  8 16:13:58 pelle NetworkManager: <info>  (hso0): exported as /org/freedesktop/NetworkManager/Devices/2
Sep  8 16:13:58 pelle NetworkManager: <info>  (hso0): now managed
Sep  8 16:13:58 pelle NetworkManager: <info>  (hso0): device state change: 1 -> 2 (reason 2)
Sep  8 16:13:58 pelle NetworkManager: <info>  (hso0): deactivating device (reason: 2).
Sep  8 16:13:58 pelle NetworkManager: <info>  (hso0): device state change: 2 -> 3 (reason 0)
Sep  8 16:13:59 pelle kernel: [   16.767332] CPU0 attaching NULL sched-domain.
Sep  8 16:13:59 pelle kernel: [   16.767349] CPU1 attaching NULL sched-domain.
Sep  8 16:13:59 pelle kernel: [   16.788238] CPU0 attaching sched-domain:
Sep  8 16:13:59 pelle kernel: [   16.788250]  domain 0: span 0-1 level SIBLING
Sep  8 16:13:59 pelle kernel: [   16.788259]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 16:13:59 pelle kernel: [   16.788277]   domain 1: span 0-1 level MC
Sep  8 16:13:59 pelle kernel: [   16.788285]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:13:59 pelle kernel: [   16.788301] CPU1 attaching sched-domain:
Sep  8 16:13:59 pelle kernel: [   16.788308]  domain 0: span 0-1 level SIBLING
Sep  8 16:13:59 pelle kernel: [   16.788316]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 16:13:59 pelle kernel: [   16.788332]   domain 1: span 0-1 level MC
Sep  8 16:13:59 pelle kernel: [   16.788339]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:14:08 pelle modem-manager: (ttyHS2) closing serial device...
Sep  8 16:14:57 pelle kernel: [   74.997119] __ratelimit: 9 callbacks suppressed
Sep  8 16:14:57 pelle kernel: [   74.997144] python[1352]: segfault at 0 ip (null) sp bfdbf11c error 4 in libz.so.1.2.3.3[110000+13000]
Sep  8 16:14:58 pelle kernel: Kernel logging (proc) stopped.
Sep  8 16:15:25 pelle kernel: imklog 4.2.0, log source = /proc/kmsg started.
Sep  8 16:15:25 pelle kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep  8 16:15:25 pelle kernel: [    0.000000] Initializing cgroup subsys cpu
Sep  8 16:15:25 pelle kernel: [    0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5)
Sep  8 16:15:25 pelle kernel: [    0.000000] KERNEL supported cpus:
Sep  8 16:15:25 pelle kernel: [    0.000000]   Intel GenuineIntel
Sep  8 16:15:25 pelle kernel: [    0.000000]   AMD AuthenticAMD
Sep  8 16:15:25 pelle kernel: [    0.000000]   NSC Geode by NSC
Sep  8 16:15:25 pelle kernel: [    0.000000]   Cyrix CyrixInstead
Sep  8 16:15:25 pelle kernel: [    0.000000]   Centaur CentaurHauls
Sep  8 16:15:25 pelle kernel: [    0.000000]   Transmeta GenuineTMx86
Sep  8 16:15:25 pelle kernel: [    0.000000]   Transmeta TransmetaCPU
Sep  8 16:15:25 pelle kernel: [    0.000000]   UMC UMC UMC UMC
Sep  8 16:15:25 pelle kernel: [    0.000000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 16:15:25 pelle kernel: [    0.000000] BIOS-provided physical RAM map:
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000] DMI 2.4 present.
Sep  8 16:15:25 pelle kernel: [    0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000
Sep  8 16:15:25 pelle kernel: [    0.000000] MTRR default type: uncachable
Sep  8 16:15:25 pelle kernel: [    0.000000] MTRR fixed ranges enabled:
Sep  8 16:15:25 pelle kernel: [    0.000000]   00000-9FFFF write-back
Sep  8 16:15:25 pelle kernel: [    0.000000]   A0000-BFFFF uncachable
Sep  8 16:15:25 pelle kernel: [    0.000000]   C0000-C7FFF write-protect
Sep  8 16:15:25 pelle kernel: [    0.000000]   C8000-EFFFF uncachable
Sep  8 16:15:25 pelle kernel: [    0.000000]   F0000-FFFFF write-protect
Sep  8 16:15:25 pelle kernel: [    0.000000] MTRR variable ranges enabled:
Sep  8 16:15:25 pelle kernel: [    0.000000]   0 base 0FFFE0000 mask 0FFFE0000 write-protect
Sep  8 16:15:25 pelle kernel: [    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
Sep  8 16:15:25 pelle kernel: [    0.000000]   2 base 000000000 mask 0E0000000 write-back
Sep  8 16:15:25 pelle kernel: [    0.000000]   3 base 020000000 mask 0E0000000 write-back
Sep  8 16:15:25 pelle kernel: [    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
Sep  8 16:15:25 pelle kernel: [    0.000000]   5 base 03F600000 mask 0FFE00000 uncachable
Sep  8 16:15:25 pelle kernel: [    0.000000]   6 base 03F500000 mask 0FFF00000 uncachable
Sep  8 16:15:25 pelle kernel: [    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
Sep  8 16:15:25 pelle kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep  8 16:15:25 pelle kernel: [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000] Scanning 1 areas for low memory corruption
Sep  8 16:15:25 pelle kernel: [    0.000000] modified physical RAM map:
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 0000000000100000 - 000000003f376000 (usable)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 000000003f376000 - 000000003f3bf000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 000000003f3bf000 - 000000003f46d000 (usable)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 000000003f4bf000 - 000000003f4f0000 (usable)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 000000003f4ff000 - 000000003f500000 (usable)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 000000003f500000 - 0000000040000000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Sep  8 16:15:25 pelle kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Sep  8 16:15:25 pelle kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Sep  8 16:15:25 pelle kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Sep  8 16:15:25 pelle kernel: [    0.000000]  0000000000 - 00377fe000 page 4k
Sep  8 16:15:25 pelle kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 8e2000-9c3000
Sep  8 16:15:25 pelle kernel: [    0.000000] RAMDISK: 2ef3e000 - 2f6d8324
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: RSDP 000fe020 00024 (v02 INTEL )
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: XSDT 3f4fe120 00064 (v01 INTEL  Napa     00000001      01000013)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: FACP 3f4fc000 000F4 (v04 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: DSDT 3f4f2000 05DE4 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: FACS 3f488000 00040
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: SSDT 3f4fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: HPET 3f4fb000 00038 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: APIC 3f4fa000 00068 (v02 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: MCFG 3f4f9000 0003C (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: SLIC 3f4f1000 00180 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: BOOT 3f4f0000 00028 (v01 INTEL  Napa     00000001 MSFT 01000013)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 16:15:25 pelle kernel: [    0.000000] 125MB HIGHMEM available.
Sep  8 16:15:25 pelle kernel: [    0.000000] 887MB LOWMEM available.
Sep  8 16:15:25 pelle kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Sep  8 16:15:25 pelle kernel: [    0.000000]   low ram: 0 - 377fe000
Sep  8 16:15:25 pelle kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Sep  8 16:15:25 pelle kernel: [    0.000000]   node 0 bootmap 00007000 - 0000df00
Sep  8 16:15:25 pelle kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Sep  8 16:15:25 pelle kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Sep  8 16:15:25 pelle kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Sep  8 16:15:25 pelle kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Sep  8 16:15:25 pelle kernel: [    0.000000]   #3 [0000100000 - 00008ddeb8]    TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
Sep  8 16:15:25 pelle kernel: [    0.000000]   #4 [002ef3e000 - 002f6d8324]          RAMDISK ==> [002ef3e000 - 002f6d8324]
Sep  8 16:15:25 pelle kernel: [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Sep  8 16:15:25 pelle kernel: [    0.000000]   #6 [00008de000 - 00008e1244]              BRK ==> [00008de000 - 00008e1244]
Sep  8 16:15:25 pelle kernel: [    0.000000]   #7 [00008e2000 - 00009bd000]          PGTABLE ==> [00008e2000 - 00009bd000]
Sep  8 16:15:25 pelle kernel: [    0.000000]   #8 [0000007000 - 000000e000]          BOOTMAP ==> [0000007000 - 000000e000]
Sep  8 16:15:25 pelle kernel: [    0.000000] Zone PFN ranges:
Sep  8 16:15:25 pelle kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Sep  8 16:15:25 pelle kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Sep  8 16:15:25 pelle kernel: [    0.000000]   HighMem  0x000377fe -> 0x0003f500
Sep  8 16:15:25 pelle kernel: [    0.000000] Movable zone start PFN for each node
Sep  8 16:15:25 pelle kernel: [    0.000000] early_node_map[6] active PFN ranges
Sep  8 16:15:25 pelle kernel: [    0.000000]     0: 0x00000000 -> 0x00000002
Sep  8 16:15:25 pelle kernel: [    0.000000]     0: 0x00000006 -> 0x0000009f
Sep  8 16:15:25 pelle kernel: [    0.000000]     0: 0x00000100 -> 0x0003f376
Sep  8 16:15:25 pelle kernel: [    0.000000]     0: 0x0003f3bf -> 0x0003f46d
Sep  8 16:15:25 pelle kernel: [    0.000000]     0: 0x0003f4bf -> 0x0003f4f0
Sep  8 16:15:25 pelle kernel: [    0.000000]     0: 0x0003f4ff -> 0x0003f500
Sep  8 16:15:25 pelle kernel: [    0.000000] On node 0 totalpages: 259057
Sep  8 16:15:25 pelle kernel: [    0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000
Sep  8 16:15:25 pelle kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Sep  8 16:15:25 pelle kernel: [    0.000000]   DMA zone: 0 pages reserved
Sep  8 16:15:25 pelle kernel: [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
Sep  8 16:15:25 pelle kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Sep  8 16:15:25 pelle kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Sep  8 16:15:25 pelle kernel: [    0.000000]   HighMem zone: 251 pages used for memmap
Sep  8 16:15:25 pelle kernel: [    0.000000]   HighMem zone: 31581 pages, LIFO batch:7
Sep  8 16:15:25 pelle kernel: [    0.000000] Using APIC driver default
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Sep  8 16:15:25 pelle kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: IRQ2 used by override.
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep  8 16:15:25 pelle kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep  8 16:15:25 pelle kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep  8 16:15:25 pelle kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep  8 16:15:25 pelle kernel: [    0.000000] nr_irqs_gsi: 24
Sep  8 16:15:25 pelle kernel: [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
Sep  8 16:15:25 pelle kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep  8 16:15:25 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Sep  8 16:15:25 pelle kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Sep  8 16:15:25 pelle kernel: [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Sep  8 16:15:25 pelle kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep  8 16:15:25 pelle kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Sep  8 16:15:25 pelle kernel: [    0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536
Sep  8 16:15:25 pelle kernel: [    0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
Sep  8 16:15:25 pelle kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 
Sep  8 16:15:25 pelle kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257030
Sep  8 16:15:25 pelle kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=05e65f51-4919-405f-ae5e-374a2ae344e8 ro quiet splash
Sep  8 16:15:25 pelle kernel: [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Sep  8 16:15:25 pelle kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep  8 16:15:25 pelle kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep  8 16:15:25 pelle kernel: [    0.000000] Enabling fast FPU save and restore... done.
Sep  8 16:15:25 pelle kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Sep  8 16:15:25 pelle kernel: [    0.000000] Initializing CPU#0
Sep  8 16:15:25 pelle kernel: [    0.000000] allocated 5186560 bytes of page_cgroup
Sep  8 16:15:25 pelle kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep  8 16:15:25 pelle kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0003f500)
Sep  8 16:15:25 pelle kernel: [    0.000000] Memory: 1004836k/1037312k available (4679k kernel code, 30884k reserved, 2124k data, 660k init, 127328k highmem)
Sep  8 16:15:25 pelle kernel: [    0.000000] virtual kernel memory layout:
Sep  8 16:15:25 pelle kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Sep  8 16:15:25 pelle kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Sep  8 16:15:25 pelle kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Sep  8 16:15:25 pelle kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Sep  8 16:15:25 pelle kernel: [    0.000000]       .init : 0xc07a5000 - 0xc084a000   ( 660 kB)
Sep  8 16:15:25 pelle kernel: [    0.000000]       .data : 0xc0591e33 - 0xc07a4e88   (2124 kB)
Sep  8 16:15:25 pelle kernel: [    0.000000]       .text : 0xc0100000 - 0xc0591e33   (4679 kB)
Sep  8 16:15:25 pelle kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Sep  8 16:15:25 pelle kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep  8 16:15:25 pelle kernel: [    0.000000] Hierarchical RCU implementation.
Sep  8 16:15:25 pelle kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Sep  8 16:15:25 pelle kernel: [    0.000000] Console: colour VGA+ 80x25
Sep  8 16:15:25 pelle kernel: [    0.000000] console [tty0] enabled
Sep  8 16:15:25 pelle kernel: [    0.000000] hpet clockevent registered
Sep  8 16:15:25 pelle kernel: [    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Sep  8 16:15:25 pelle kernel: [    0.000000] Fast TSC calibration using PIT
Sep  8 16:15:25 pelle kernel: [    0.000000] Detected 1595.794 MHz processor.
Sep  8 16:15:25 pelle kernel: [    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.58 BogoMIPS (lpj=6383176)
Sep  8 16:15:25 pelle kernel: [    0.004047] Security Framework initialized
Sep  8 16:15:25 pelle kernel: [    0.004090] AppArmor: AppArmor initialized
Sep  8 16:15:25 pelle kernel: [    0.004107] Mount-cache hash table entries: 512
Sep  8 16:15:25 pelle kernel: [    0.004354] Initializing cgroup subsys ns
Sep  8 16:15:25 pelle kernel: [    0.004365] Initializing cgroup subsys cpuacct
Sep  8 16:15:25 pelle kernel: [    0.004375] Initializing cgroup subsys memory
Sep  8 16:15:25 pelle kernel: [    0.004390] Initializing cgroup subsys devices
Sep  8 16:15:25 pelle kernel: [    0.004396] Initializing cgroup subsys freezer
Sep  8 16:15:25 pelle kernel: [    0.004401] Initializing cgroup subsys net_cls
Sep  8 16:15:25 pelle kernel: [    0.004437] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 16:15:25 pelle kernel: [    0.004446] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 16:15:25 pelle kernel: [    0.004452] CPU: L2 cache: 512K
Sep  8 16:15:25 pelle kernel: [    0.004458] CPU: Physical Processor ID: 0
Sep  8 16:15:25 pelle kernel: [    0.004462] CPU: Processor Core ID: 0
Sep  8 16:15:25 pelle kernel: [    0.004470] mce: CPU supports 5 MCE banks
Sep  8 16:15:25 pelle kernel: [    0.004488] CPU0: Thermal monitoring enabled (TM1)
Sep  8 16:15:25 pelle kernel: [    0.004496] using mwait in idle threads.
Sep  8 16:15:25 pelle kernel: [    0.004510] Performance Events: Atom events, Intel PMU driver.
Sep  8 16:15:25 pelle kernel: [    0.004528] ... version:                3
Sep  8 16:15:25 pelle kernel: [    0.004532] ... bit width:              40
Sep  8 16:15:25 pelle kernel: [    0.004537] ... generic registers:      2
Sep  8 16:15:25 pelle kernel: [    0.004542] ... value mask:             000000ffffffffff
Sep  8 16:15:25 pelle kernel: [    0.004547] ... max period:             000000007fffffff
Sep  8 16:15:25 pelle kernel: [    0.004552] ... fixed-purpose events:   3
Sep  8 16:15:25 pelle kernel: [    0.004557] ... event mask:             0000000700000003
Sep  8 16:15:25 pelle kernel: [    0.004567] Checking 'hlt' instruction... OK.
Sep  8 16:15:25 pelle kernel: [    0.020010] Disabling 4MB page tables to avoid TLB bug
Sep  8 16:15:25 pelle kernel: [    0.024462] ACPI: Core revision 20090903
Sep  8 16:15:25 pelle kernel: [    0.040018] ftrace: converting mcount calls to 0f 1f 44 00 00
Sep  8 16:15:25 pelle kernel: [    0.040030] ftrace: allocating 21780 entries in 43 pages
Sep  8 16:15:25 pelle kernel: [    0.044111] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep  8 16:15:25 pelle kernel: [    0.044520] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep  8 16:15:25 pelle kernel: [    0.086225] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 16:15:25 pelle kernel: [    0.088001] Booting processor 1 APIC 0x1 ip 0x6000
Sep  8 16:15:25 pelle kernel: [    0.008000] Initializing CPU#1
Sep  8 16:15:25 pelle kernel: [    0.008000] Atom PSE erratum detected, BIOS microcode update recommended
Sep  8 16:15:25 pelle kernel: [    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
Sep  8 16:15:25 pelle kernel: [    0.008000] CPU: L2 cache: 512K
Sep  8 16:15:25 pelle kernel: [    0.008000] CPU: Physical Processor ID: 0
Sep  8 16:15:25 pelle kernel: [    0.008000] CPU: Processor Core ID: 0
Sep  8 16:15:25 pelle kernel: [    0.008000] CPU1: Thermal monitoring enabled (TM1)
Sep  8 16:15:25 pelle kernel: [    0.172148] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Sep  8 16:15:25 pelle kernel: [    0.172178] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep  8 16:15:25 pelle kernel: [    0.176035] Brought up 2 CPUs
Sep  8 16:15:25 pelle kernel: [    0.176043] Total of 2 processors activated (6383.52 BogoMIPS).
Sep  8 16:15:25 pelle kernel: [    0.176291] CPU0 attaching sched-domain:
Sep  8 16:15:25 pelle kernel: [    0.176300]  domain 0: span 0-1 level SIBLING
Sep  8 16:15:25 pelle kernel: [    0.176306]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 16:15:25 pelle kernel: [    0.176319]   domain 1: span 0-1 level MC
Sep  8 16:15:25 pelle kernel: [    0.176324]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:15:25 pelle kernel: [    0.176336] CPU1 attaching sched-domain:
Sep  8 16:15:25 pelle kernel: [    0.176341]  domain 0: span 0-1 level SIBLING
Sep  8 16:15:25 pelle kernel: [    0.176346]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 16:15:25 pelle kernel: [    0.176358]   domain 1: span 0-1 level MC
Sep  8 16:15:25 pelle kernel: [    0.176363]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:15:25 pelle kernel: [    0.176593] devtmpfs: initialized
Sep  8 16:15:25 pelle kernel: [    0.176593] regulator: core version 0.5
Sep  8 16:15:25 pelle kernel: [    0.176593] Time: 13:15:15  Date: 09/08/10
Sep  8 16:15:25 pelle kernel: [    0.176593] NET: Registered protocol family 16
Sep  8 16:15:25 pelle kernel: [    0.176593] Trying to unpack rootfs image as initramfs...
Sep  8 16:15:25 pelle kernel: [    0.176593] EISA bus registered
Sep  8 16:15:25 pelle kernel: [    0.176609] ACPI: bus type pci registered
Sep  8 16:15:25 pelle kernel: [    0.176782] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Sep  8 16:15:25 pelle kernel: [    0.176791] PCI: MCFG area at e0000000 reserved in E820
Sep  8 16:15:25 pelle kernel: [    0.176797] PCI: Using MMCONFIG for extended config space
Sep  8 16:15:25 pelle kernel: [    0.176804] PCI: Using configuration type 1 for base access
Sep  8 16:15:25 pelle kernel: [    0.181850] bio: create slab <bio-0> at 0
Sep  8 16:15:25 pelle kernel: [    0.184404] ACPI: EC: Look up EC in DSDT
Sep  8 16:15:25 pelle kernel: [    0.188682] ACPI: Executed 1 blocks of module-level executable AML code
Sep  8 16:15:25 pelle kernel: [    0.193056] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 16:15:25 pelle kernel: [    0.193331] ACPI: BIOS _OSI(Linux) query ignored
Sep  8 16:15:25 pelle kernel: [    0.200442] ACPI: Interpreter enabled
Sep  8 16:15:25 pelle kernel: [    0.200461] ACPI: (supports S0 S3 S4 S5)
Sep  8 16:15:25 pelle kernel: [    0.200534] ACPI: Using IOAPIC for interrupt routing
Sep  8 16:15:25 pelle kernel: [    0.214492] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Sep  8 16:15:25 pelle kernel: [    0.215155] ACPI: No dock devices found.
Sep  8 16:15:25 pelle kernel: [    0.216959] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.216980] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.217005] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
Sep  8 16:15:25 pelle kernel: [    0.217071] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep  8 16:15:25 pelle kernel: [    0.217276] pci 0000:00:02.0: reg 10 32bit mmio: [0x58480000-0x584fffff]
Sep  8 16:15:25 pelle kernel: [    0.217289] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
Sep  8 16:15:25 pelle kernel: [    0.217301] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
Sep  8 16:15:25 pelle kernel: [    0.217314] pci 0000:00:02.0: reg 1c 32bit mmio: [0x58500000-0x5853ffff]
Sep  8 16:15:25 pelle kernel: [    0.217383] pci 0000:00:02.1: reg 10 32bit mmio: [0x58400000-0x5847ffff]
Sep  8 16:15:25 pelle kernel: [    0.217547] pci 0000:00:1b.0: reg 10 64bit mmio: [0x58540000-0x58543fff]
Sep  8 16:15:25 pelle kernel: [    0.217631] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep  8 16:15:25 pelle kernel: [    0.217643] pci 0000:00:1b.0: PME# disabled
Sep  8 16:15:25 pelle kernel: [    0.217780] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep  8 16:15:25 pelle kernel: [    0.217791] pci 0000:00:1c.0: PME# disabled
Sep  8 16:15:25 pelle kernel: [    0.217924] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep  8 16:15:25 pelle kernel: [    0.217935] pci 0000:00:1c.1: PME# disabled
Sep  8 16:15:25 pelle kernel: [    0.218066] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Sep  8 16:15:25 pelle kernel: [    0.218077] pci 0000:00:1c.2: PME# disabled
Sep  8 16:15:25 pelle kernel: [    0.218209] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Sep  8 16:15:25 pelle kernel: [    0.218220] pci 0000:00:1c.3: PME# disabled
Sep  8 16:15:25 pelle kernel: [    0.218313] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
Sep  8 16:15:25 pelle kernel: [    0.218410] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
Sep  8 16:15:25 pelle kernel: [    0.218512] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
Sep  8 16:15:25 pelle kernel: [    0.218613] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
Sep  8 16:15:25 pelle kernel: [    0.218712] pci 0000:00:1d.7: reg 10 32bit mmio: [0x58544400-0x585447ff]
Sep  8 16:15:25 pelle kernel: [    0.218797] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Sep  8 16:15:25 pelle kernel: [    0.218808] pci 0000:00:1d.7: PME# disabled
Sep  8 16:15:25 pelle kernel: [    0.219043] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Sep  8 16:15:25 pelle kernel: [    0.219055] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
Sep  8 16:15:25 pelle kernel: [    0.219073] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
Sep  8 16:15:25 pelle kernel: [    0.219166] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
Sep  8 16:15:25 pelle kernel: [    0.219182] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
Sep  8 16:15:25 pelle kernel: [    0.219197] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
Sep  8 16:15:25 pelle kernel: [    0.219213] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
Sep  8 16:15:25 pelle kernel: [    0.219229] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
Sep  8 16:15:25 pelle kernel: [    0.219286] pci 0000:00:1f.2: PME# supported from D3hot
Sep  8 16:15:25 pelle kernel: [    0.219298] pci 0000:00:1f.2: PME# disabled
Sep  8 16:15:25 pelle kernel: [    0.219391] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
Sep  8 16:15:25 pelle kernel: [    0.219524] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
Sep  8 16:15:25 pelle kernel: [    0.219536] pci 0000:00:1c.0: bridge 32bit mmio: [0x57300000-0x583fffff]
Sep  8 16:15:25 pelle kernel: [    0.219552] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
Sep  8 16:15:25 pelle kernel: [    0.219641] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
Sep  8 16:15:25 pelle kernel: [    0.219678] pci 0000:02:00.0: reg 18 64bit mmio pref: [0x51010000-0x51010fff]
Sep  8 16:15:25 pelle kernel: [    0.219706] pci 0000:02:00.0: reg 20 64bit mmio pref: [0x51000000-0x5100ffff]
Sep  8 16:15:25 pelle kernel: [    0.219725] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
Sep  8 16:15:25 pelle kernel: [    0.219796] pci 0000:02:00.0: supports D1 D2
Sep  8 16:15:25 pelle kernel: [    0.219803] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep  8 16:15:25 pelle kernel: [    0.219815] pci 0000:02:00.0: PME# disabled
Sep  8 16:15:25 pelle kernel: [    0.219927] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
Sep  8 16:15:25 pelle kernel: [    0.219938] pci 0000:00:1c.1: bridge 32bit mmio: [0x56300000-0x572fffff]
Sep  8 16:15:25 pelle kernel: [    0.219953] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff]
Sep  8 16:15:25 pelle kernel: [    0.220160] pci 0000:03:00.0: reg 10 64bit mmio: [0x55200000-0x5520ffff]
Sep  8 16:15:25 pelle kernel: [    0.220516] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
Sep  8 16:15:25 pelle kernel: [    0.220528] pci 0000:00:1c.2: bridge 32bit mmio: [0x55200000-0x562fffff]
Sep  8 16:15:25 pelle kernel: [    0.220543] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52100000-0x530fffff]
Sep  8 16:15:25 pelle kernel: [    0.220631] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
Sep  8 16:15:25 pelle kernel: [    0.220643] pci 0000:00:1c.3: bridge 32bit mmio: [0x54100000-0x551fffff]
Sep  8 16:15:25 pelle kernel: [    0.220658] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53100000-0x540fffff]
Sep  8 16:15:25 pelle kernel: [    0.220746] pci 0000:00:1e.0: transparent bridge
Sep  8 16:15:25 pelle kernel: [    0.220807] pci_bus 0000:00: on NUMA node 0
Sep  8 16:15:25 pelle kernel: [    0.220829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep  8 16:15:25 pelle kernel: [    0.221351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
Sep  8 16:15:25 pelle kernel: [    0.221763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
Sep  8 16:15:25 pelle kernel: [    0.222068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
Sep  8 16:15:25 pelle kernel: [    0.222300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
Sep  8 16:15:25 pelle kernel: [    0.222528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
Sep  8 16:15:25 pelle kernel: [    0.223113] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.223134] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.235749] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 16:15:25 pelle kernel: [    0.236100] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 16:15:25 pelle kernel: [    0.236428] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 16:15:25 pelle kernel: [    0.236734] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Sep  8 16:15:25 pelle kernel: [    0.237036] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 16:15:25 pelle kernel: [    0.237358] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 16:15:25 pelle kernel: [    0.237664] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 16:15:25 pelle kernel: [    0.237983] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Sep  8 16:15:25 pelle kernel: [    0.238346] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep  8 16:15:25 pelle kernel: [    0.238379] vgaarb: loaded
Sep  8 16:15:25 pelle kernel: [    0.238731] SCSI subsystem initialized
Sep  8 16:15:25 pelle kernel: [    0.238996] libata version 3.00 loaded.
Sep  8 16:15:25 pelle kernel: [    0.239242] usbcore: registered new interface driver usbfs
Sep  8 16:15:25 pelle kernel: [    0.239294] usbcore: registered new interface driver hub
Sep  8 16:15:25 pelle kernel: [    0.239386] usbcore: registered new device driver usb
Sep  8 16:15:25 pelle kernel: [    0.240080] ACPI: WMI: Mapper loaded
Sep  8 16:15:25 pelle kernel: [    0.240088] PCI: Using ACPI for IRQ routing
Sep  8 16:15:25 pelle kernel: [    0.240534] NetLabel: Initializing
Sep  8 16:15:25 pelle kernel: [    0.240541] NetLabel:  domain hash size = 128
Sep  8 16:15:25 pelle kernel: [    0.240546] NetLabel:  protocols = UNLABELED CIPSOv4
Sep  8 16:15:25 pelle kernel: [    0.240578] NetLabel:  unlabeled traffic allowed by default
Sep  8 16:15:25 pelle kernel: [    0.240705] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep  8 16:15:25 pelle kernel: [    0.240722] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Sep  8 16:15:25 pelle kernel: [    0.244496] Switching to clocksource tsc
Sep  8 16:15:25 pelle kernel: [    0.249017] AppArmor: AppArmor Filesystem Enabled
Sep  8 16:15:25 pelle kernel: [    0.249059] pnp: PnP ACPI init
Sep  8 16:15:25 pelle kernel: [    0.249103] ACPI: bus type pnp registered
Sep  8 16:15:25 pelle kernel: [    0.251801] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
Sep  8 16:15:25 pelle kernel: [    0.253509] pnp: PnP ACPI: found 9 devices
Sep  8 16:15:25 pelle kernel: [    0.253517] ACPI: ACPI bus type pnp unregistered
Sep  8 16:15:25 pelle kernel: [    0.253527] PnPBIOS: Disabled by ACPI PNP
Sep  8 16:15:25 pelle kernel: [    0.253561] system 00:01: ioport range 0x200-0x20f has been reserved
Sep  8 16:15:25 pelle kernel: [    0.253573] system 00:01: ioport range 0x600-0x60f has been reserved
Sep  8 16:15:25 pelle kernel: [    0.253582] system 00:01: ioport range 0x610-0x610 has been reserved
Sep  8 16:15:25 pelle kernel: [    0.253592] system 00:01: ioport range 0x800-0x80f has been reserved
Sep  8 16:15:25 pelle kernel: [    0.253602] system 00:01: ioport range 0x400-0x47f has been reserved
Sep  8 16:15:25 pelle kernel: [    0.253611] system 00:01: ioport range 0x500-0x53f has been reserved
Sep  8 16:15:25 pelle kernel: [    0.253624] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Sep  8 16:15:25 pelle kernel: [    0.253634] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Sep  8 16:15:25 pelle kernel: [    0.253644] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Sep  8 16:15:25 pelle kernel: [    0.253655] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Sep  8 16:15:25 pelle kernel: [    0.253665] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Sep  8 16:15:25 pelle kernel: [    0.253676] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Sep  8 16:15:25 pelle kernel: [    0.253686] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Sep  8 16:15:25 pelle kernel: [    0.288870] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
Sep  8 16:15:25 pelle kernel: [    0.288961] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Sep  8 16:15:25 pelle kernel: [    0.288972] pci 0000:00:1c.0:   IO window: 0x5000-0x5fff
Sep  8 16:15:25 pelle kernel: [    0.288985] pci 0000:00:1c.0:   MEM window: 0x57300000-0x583fffff
Sep  8 16:15:25 pelle kernel: [    0.288997] pci 0000:00:1c.0:   PREFETCH window: 0x00000050000000-0x00000050ffffff
Sep  8 16:15:25 pelle kernel: [    0.289017] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Sep  8 16:15:25 pelle kernel: [    0.289026] pci 0000:00:1c.1:   IO window: 0x3000-0x4fff
Sep  8 16:15:25 pelle kernel: [    0.289039] pci 0000:00:1c.1:   MEM window: 0x56300000-0x572fffff
Sep  8 16:15:25 pelle kernel: [    0.289050] pci 0000:00:1c.1:   PREFETCH window: 0x00000051000000-0x000000520fffff
Sep  8 16:15:25 pelle kernel: [    0.289065] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
Sep  8 16:15:25 pelle kernel: [    0.289075] pci 0000:00:1c.2:   IO window: 0x2000-0x2fff
Sep  8 16:15:25 pelle kernel: [    0.289087] pci 0000:00:1c.2:   MEM window: 0x55200000-0x562fffff
Sep  8 16:15:25 pelle kernel: [    0.289099] pci 0000:00:1c.2:   PREFETCH window: 0x00000052100000-0x000000530fffff
Sep  8 16:15:25 pelle kernel: [    0.289114] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
Sep  8 16:15:25 pelle kernel: [    0.289123] pci 0000:00:1c.3:   IO window: 0x1000-0x1fff
Sep  8 16:15:25 pelle kernel: [    0.289135] pci 0000:00:1c.3:   MEM window: 0x54100000-0x551fffff
Sep  8 16:15:25 pelle kernel: [    0.289147] pci 0000:00:1c.3:   PREFETCH window: 0x00000053100000-0x000000540fffff
Sep  8 16:15:25 pelle kernel: [    0.289162] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
Sep  8 16:15:25 pelle kernel: [    0.289168] pci 0000:00:1e.0:   IO window: disabled
Sep  8 16:15:25 pelle kernel: [    0.289180] pci 0000:00:1e.0:   MEM window: disabled
Sep  8 16:15:25 pelle kernel: [    0.289189] pci 0000:00:1e.0:   PREFETCH window: disabled
Sep  8 16:15:25 pelle kernel: [    0.289228]   alloc irq_desc for 16 on node -1
Sep  8 16:15:25 pelle kernel: [    0.289236]   alloc kstat_irqs on node -1
Sep  8 16:15:25 pelle kernel: [    0.289253] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 16:15:25 pelle kernel: [    0.289267] pci 0000:00:1c.0: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.289288]   alloc irq_desc for 17 on node -1
Sep  8 16:15:25 pelle kernel: [    0.289294]   alloc kstat_irqs on node -1
Sep  8 16:15:25 pelle kernel: [    0.289306] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 16:15:25 pelle kernel: [    0.289317] pci 0000:00:1c.1: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.289338]   alloc irq_desc for 18 on node -1
Sep  8 16:15:25 pelle kernel: [    0.289344]   alloc kstat_irqs on node -1
Sep  8 16:15:25 pelle kernel: [    0.289355] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 16:15:25 pelle kernel: [    0.289366] pci 0000:00:1c.2: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.289386]   alloc irq_desc for 19 on node -1
Sep  8 16:15:25 pelle kernel: [    0.289392]   alloc kstat_irqs on node -1
Sep  8 16:15:25 pelle kernel: [    0.289403] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 16:15:25 pelle kernel: [    0.289414] pci 0000:00:1c.3: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.289431] pci 0000:00:1e.0: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.289442] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Sep  8 16:15:25 pelle kernel: [    0.289451] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Sep  8 16:15:25 pelle kernel: [    0.289459] pci_bus 0000:01: resource 0 io:  [0x5000-0x5fff]
Sep  8 16:15:25 pelle kernel: [    0.289468] pci_bus 0000:01: resource 1 mem: [0x57300000-0x583fffff]
Sep  8 16:15:25 pelle kernel: [    0.289477] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
Sep  8 16:15:25 pelle kernel: [    0.289485] pci_bus 0000:02: resource 0 io:  [0x3000-0x4fff]
Sep  8 16:15:25 pelle kernel: [    0.289494] pci_bus 0000:02: resource 1 mem: [0x56300000-0x572fffff]
Sep  8 16:15:25 pelle kernel: [    0.289503] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x520fffff]
Sep  8 16:15:25 pelle kernel: [    0.289513] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
Sep  8 16:15:25 pelle kernel: [    0.289522] pci_bus 0000:03: resource 1 mem: [0x55200000-0x562fffff]
Sep  8 16:15:25 pelle kernel: [    0.289530] pci_bus 0000:03: resource 2 pref mem [0x52100000-0x530fffff]
Sep  8 16:15:25 pelle kernel: [    0.289538] pci_bus 0000:04: resource 0 io:  [0x1000-0x1fff]
Sep  8 16:15:25 pelle kernel: [    0.289547] pci_bus 0000:04: resource 1 mem: [0x54100000-0x551fffff]
Sep  8 16:15:25 pelle kernel: [    0.289556] pci_bus 0000:04: resource 2 pref mem [0x53100000-0x540fffff]
Sep  8 16:15:25 pelle kernel: [    0.289566] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
Sep  8 16:15:25 pelle kernel: [    0.289575] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
Sep  8 16:15:25 pelle kernel: [    0.289680] NET: Registered protocol family 2
Sep  8 16:15:25 pelle kernel: [    0.289964] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep  8 16:15:25 pelle kernel: [    0.290957] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep  8 16:15:25 pelle kernel: [    0.292170] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep  8 16:15:25 pelle kernel: [    0.292733] TCP: Hash tables configured (established 131072 bind 65536)
Sep  8 16:15:25 pelle kernel: [    0.292742] TCP reno registered
Sep  8 16:15:25 pelle kernel: [    0.293065] NET: Registered protocol family 1
Sep  8 16:15:25 pelle kernel: [    0.293126] pci 0000:00:02.0: Boot video device
Sep  8 16:15:25 pelle kernel: [    0.293458] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Sep  8 16:15:25 pelle kernel: [    0.293466] Simple Boot Flag at 0x44 set to 0x1
Sep  8 16:15:25 pelle kernel: [    0.293992] cpufreq-nforce2: No nForce2 chipset.
Sep  8 16:15:25 pelle kernel: [    0.294077] Scanning for low memory corruption every 60 seconds
Sep  8 16:15:25 pelle kernel: [    0.294417] audit: initializing netlink socket (disabled)
Sep  8 16:15:25 pelle kernel: [    0.294445] type=2000 audit(1283951714.290:1): initialized
Sep  8 16:15:25 pelle kernel: [    0.316111] highmem bounce pool size: 64 pages
Sep  8 16:15:25 pelle kernel: [    0.316128] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Sep  8 16:15:25 pelle kernel: [    0.321492] VFS: Disk quotas dquot_6.5.2
Sep  8 16:15:25 pelle kernel: [    0.321692] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep  8 16:15:25 pelle kernel: [    0.323804] fuse init (API version 7.13)
Sep  8 16:15:25 pelle kernel: [    0.324118] msgmni has been set to 1714
Sep  8 16:15:25 pelle kernel: [    0.324834] alg: No test for stdrng (krng)
Sep  8 16:15:25 pelle kernel: [    0.325044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep  8 16:15:25 pelle kernel: [    0.325053] io scheduler noop registered
Sep  8 16:15:25 pelle kernel: [    0.325059] io scheduler anticipatory registered
Sep  8 16:15:25 pelle kernel: [    0.325065] io scheduler deadline registered
Sep  8 16:15:25 pelle kernel: [    0.325206] io scheduler cfq registered (default)
Sep  8 16:15:25 pelle kernel: [    0.325566]   alloc irq_desc for 24 on node -1
Sep  8 16:15:25 pelle kernel: [    0.325574]   alloc kstat_irqs on node -1
Sep  8 16:15:25 pelle kernel: [    0.325597] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
Sep  8 16:15:25 pelle kernel: [    0.325616] pcieport 0000:00:1c.0: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.325891]   alloc irq_desc for 25 on node -1
Sep  8 16:15:25 pelle kernel: [    0.325898]   alloc kstat_irqs on node -1
Sep  8 16:15:25 pelle kernel: [    0.325916] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
Sep  8 16:15:25 pelle kernel: [    0.325934] pcieport 0000:00:1c.1: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.326217]   alloc irq_desc for 26 on node -1
Sep  8 16:15:25 pelle kernel: [    0.326225]   alloc kstat_irqs on node -1
Sep  8 16:15:25 pelle kernel: [    0.326245] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
Sep  8 16:15:25 pelle kernel: [    0.326265] pcieport 0000:00:1c.2: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.326582]   alloc irq_desc for 27 on node -1
Sep  8 16:15:25 pelle kernel: [    0.326589]   alloc kstat_irqs on node -1
Sep  8 16:15:25 pelle kernel: [    0.326607] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
Sep  8 16:15:25 pelle kernel: [    0.326625] pcieport 0000:00:1c.3: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.326879] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  8 16:15:25 pelle kernel: [    0.327193] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.327217] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.327569] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.327588] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.327907] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.327926] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.328256] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.328275] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.328670] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.328689] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.329030] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.329053] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.329388] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.329407] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.329724] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.329742] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014ca8), AE_ALREADY_EXISTS
Sep  8 16:15:25 pelle kernel: [    0.329868] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep  8 16:15:25 pelle kernel: [    0.330512] ACPI: AC Adapter [ACAD] (on-line)
Sep  8 16:15:25 pelle kernel: [    0.330798] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Sep  8 16:15:25 pelle kernel: [    0.330809] ACPI: Power Button [PWRB]
Sep  8 16:15:25 pelle kernel: [    0.330947] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
Sep  8 16:15:25 pelle kernel: [    0.331457] ACPI: Lid Switch [LID0]
Sep  8 16:15:25 pelle kernel: [    0.331623] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Sep  8 16:15:25 pelle kernel: [    0.331634] ACPI: Sleep Button [SLPB]
Sep  8 16:15:25 pelle kernel: [    0.331812] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Sep  8 16:15:25 pelle kernel: [    0.331821] ACPI: Power Button [PWRF]
Sep  8 16:15:25 pelle kernel: [    0.333737] ACPI: SSDT 3f380c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
Sep  8 16:15:25 pelle kernel: [    0.334802] ACPI: SSDT 3f37fe10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
Sep  8 16:15:25 pelle kernel: [    0.335733] Marking TSC unstable due to TSC halts in idle
Sep  8 16:15:25 pelle kernel: [    0.336005] processor LNXCPU:00: registered as cooling_device0
Sep  8 16:15:25 pelle kernel: [    0.337054] ACPI: SSDT 3f380f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
Sep  8 16:15:25 pelle kernel: [    0.338002] ACPI: SSDT 3f37ef10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
Sep  8 16:15:25 pelle kernel: [    0.338743] Switching to clocksource hpet
Sep  8 16:15:25 pelle kernel: [    0.339910] processor LNXCPU:01: registered as cooling_device1
Sep  8 16:15:25 pelle kernel: [    0.342868] ACPI: Battery Slot [BAT1] (battery absent)
Sep  8 16:15:25 pelle kernel: [    0.342897] isapnp: Scanning for PnP cards...
Sep  8 16:15:25 pelle kernel: [    0.354380] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Sep  8 16:15:25 pelle kernel: [    0.358205] brd: module loaded
Sep  8 16:15:25 pelle kernel: [    0.359676] loop: module loaded
Sep  8 16:15:25 pelle kernel: [    0.359939] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Sep  8 16:15:25 pelle kernel: [    0.360205] ata_piix 0000:00:1f.2: version 2.13
Sep  8 16:15:25 pelle kernel: [    0.360242] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 16:15:25 pelle kernel: [    0.360254] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Sep  8 16:15:25 pelle kernel: [    0.360340] ata_piix 0000:00:1f.2: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.401074] scsi0 : ata_piix
Sep  8 16:15:25 pelle kernel: [    0.479750] scsi1 : ata_piix
Sep  8 16:15:25 pelle kernel: [    0.482450] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
Sep  8 16:15:25 pelle kernel: [    0.482459] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
Sep  8 16:15:25 pelle kernel: [    0.483640] Fixed MDIO Bus: probed
Sep  8 16:15:25 pelle kernel: [    0.483758] PPP generic driver version 2.4.2
Sep  8 16:15:25 pelle kernel: [    0.483902] tun: Universal TUN/TAP device driver, 1.6
Sep  8 16:15:25 pelle kernel: [    0.483908] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep  8 16:15:25 pelle kernel: [    0.484169] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep  8 16:15:25 pelle kernel: [    0.484224] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 16:15:25 pelle kernel: [    0.484260] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.484269] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep  8 16:15:25 pelle kernel: [    0.484364] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep  8 16:15:25 pelle kernel: [    0.484409] ehci_hcd 0000:00:1d.7: using broken periodic workaround
Sep  8 16:15:25 pelle kernel: [    0.484429] ehci_hcd 0000:00:1d.7: debug port 1
Sep  8 16:15:25 pelle kernel: [    0.488310] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Sep  8 16:15:25 pelle kernel: [    0.488349] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
Sep  8 16:15:25 pelle kernel: [    0.517241] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Sep  8 16:15:25 pelle kernel: [    0.517569] usb usb1: configuration #1 chosen from 1 choice
Sep  8 16:15:25 pelle kernel: [    0.517659] hub 1-0:1.0: USB hub found
Sep  8 16:15:25 pelle kernel: [    0.517684] hub 1-0:1.0: 8 ports detected
Sep  8 16:15:25 pelle kernel: [    0.517867] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep  8 16:15:25 pelle kernel: [    0.517919] uhci_hcd: USB Universal Host Controller Interface driver
Sep  8 16:15:25 pelle kernel: [    0.518008] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 16:15:25 pelle kernel: [    0.518028] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.518037] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep  8 16:15:25 pelle kernel: [    0.518150] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep  8 16:15:25 pelle kernel: [    0.518199] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
Sep  8 16:15:25 pelle kernel: [    0.518469] usb usb2: configuration #1 chosen from 1 choice
Sep  8 16:15:25 pelle kernel: [    0.518549] hub 2-0:1.0: USB hub found
Sep  8 16:15:25 pelle kernel: [    0.518570] hub 2-0:1.0: 2 ports detected
Sep  8 16:15:25 pelle kernel: [    0.518684] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep  8 16:15:25 pelle kernel: [    0.518699] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.518708] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep  8 16:15:25 pelle kernel: [    0.518810] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep  8 16:15:25 pelle kernel: [    0.518873] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
Sep  8 16:15:25 pelle kernel: [    0.519126] usb usb3: configuration #1 chosen from 1 choice
Sep  8 16:15:25 pelle kernel: [    0.519204] hub 3-0:1.0: USB hub found
Sep  8 16:15:25 pelle kernel: [    0.519223] hub 3-0:1.0: 2 ports detected
Sep  8 16:15:25 pelle kernel: [    0.519338] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep  8 16:15:25 pelle kernel: [    0.519353] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.519361] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep  8 16:15:25 pelle kernel: [    0.519458] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep  8 16:15:25 pelle kernel: [    0.519514] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
Sep  8 16:15:25 pelle kernel: [    0.519768] usb usb4: configuration #1 chosen from 1 choice
Sep  8 16:15:25 pelle kernel: [    0.519847] hub 4-0:1.0: USB hub found
Sep  8 16:15:25 pelle kernel: [    0.519868] hub 4-0:1.0: 2 ports detected
Sep  8 16:15:25 pelle kernel: [    0.519983] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Sep  8 16:15:25 pelle kernel: [    0.519998] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    0.520006] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep  8 16:15:25 pelle kernel: [    0.520106] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep  8 16:15:25 pelle kernel: [    0.520164] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
Sep  8 16:15:25 pelle kernel: [    0.520414] usb usb5: configuration #1 chosen from 1 choice
Sep  8 16:15:25 pelle kernel: [    0.520494] hub 5-0:1.0: USB hub found
Sep  8 16:15:25 pelle kernel: [    0.520517] hub 5-0:1.0: 2 ports detected
Sep  8 16:15:25 pelle kernel: [    0.520764] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Sep  8 16:15:25 pelle kernel: [    0.524640] i8042.c: Warning: Keylock active.
Sep  8 16:15:25 pelle kernel: [    0.566513] i8042.c: Detected active multiplexing controller, rev 1.1.
Sep  8 16:15:25 pelle kernel: [    0.577545] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  8 16:15:25 pelle kernel: [    0.577576] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Sep  8 16:15:25 pelle kernel: [    0.577586] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Sep  8 16:15:25 pelle kernel: [    0.577595] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Sep  8 16:15:25 pelle kernel: [    0.577604] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Sep  8 16:15:25 pelle kernel: [    0.577902] mice: PS/2 mouse device common for all mice
Sep  8 16:15:25 pelle kernel: [    0.578329] rtc_cmos 00:03: RTC can wake from S4
Sep  8 16:15:25 pelle kernel: [    0.578433] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep  8 16:15:25 pelle kernel: [    0.578485] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Sep  8 16:15:25 pelle kernel: [    0.578826] device-mapper: uevent: version 1.0.3
Sep  8 16:15:25 pelle kernel: [    0.610946] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Sep  8 16:15:25 pelle kernel: [    0.621187] device-mapper: multipath: version 1.1.0 loaded
Sep  8 16:15:25 pelle kernel: [    0.621198] device-mapper: multipath round-robin: version 1.0.0 loaded
Sep  8 16:15:25 pelle kernel: [    0.625690] EISA: Probing bus 0 at eisa.0
Sep  8 16:15:25 pelle kernel: [    0.625706] Cannot allocate resource for EISA slot 1
Sep  8 16:15:25 pelle kernel: [    0.625713] Cannot allocate resource for EISA slot 2
Sep  8 16:15:25 pelle kernel: [    0.625720] Cannot allocate resource for EISA slot 3
Sep  8 16:15:25 pelle kernel: [    0.625726] Cannot allocate resource for EISA slot 4
Sep  8 16:15:25 pelle kernel: [    0.625732] Cannot allocate resource for EISA slot 5
Sep  8 16:15:25 pelle kernel: [    0.625739] Cannot allocate resource for EISA slot 6
Sep  8 16:15:25 pelle kernel: [    0.625757] EISA: Detected 0 cards.
Sep  8 16:15:25 pelle kernel: [    0.641259] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Sep  8 16:15:25 pelle kernel: [    0.685876] cpuidle: using governor ladder
Sep  8 16:15:25 pelle kernel: [    0.686218] cpuidle: using governor menu
Sep  8 16:15:25 pelle kernel: [    0.687547] TCP cubic registered
Sep  8 16:15:25 pelle kernel: [    0.688062] NET: Registered protocol family 10
Sep  8 16:15:25 pelle kernel: [    0.689396] lo: Disabled Privacy Extensions
Sep  8 16:15:25 pelle kernel: [    0.690327] NET: Registered protocol family 17
Sep  8 16:15:25 pelle kernel: [    0.691460] Using IPI No-Shortcut mode
Sep  8 16:15:25 pelle kernel: [    0.691719] PM: Resume from disk failed.
Sep  8 16:15:25 pelle kernel: [    0.691749] registered taskstats version 1
Sep  8 16:15:25 pelle kernel: [    0.692472]   Magic number: 10:715:280
Sep  8 16:15:25 pelle kernel: [    0.692519] tty tty17: hash matches
Sep  8 16:15:25 pelle kernel: [    0.692631] rtc_cmos 00:03: setting system clock to 2010-09-08 13:15:15 UTC (1283951715)
Sep  8 16:15:25 pelle kernel: [    0.692639] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep  8 16:15:25 pelle kernel: [    0.692645] EDD information not available.
Sep  8 16:15:25 pelle kernel: [    0.697701] isapnp: No Plug & Play device found
Sep  8 16:15:25 pelle kernel: [    0.697763] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
Sep  8 16:15:25 pelle kernel: [    0.697773] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep  8 16:15:25 pelle kernel: [    0.710261] Freeing initrd memory: 7784k freed
Sep  8 16:15:25 pelle kernel: [    0.717442] ata1.00: configured for UDMA/133
Sep  8 16:15:25 pelle kernel: [    0.718351] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
Sep  8 16:15:25 pelle kernel: [    0.718805] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Sep  8 16:15:25 pelle kernel: [    0.718824] sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep  8 16:15:25 pelle kernel: [    0.719001] sd 0:0:0:0: [sda] Write Protect is off
Sep  8 16:15:25 pelle kernel: [    0.719010] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  8 16:15:25 pelle kernel: [    0.719089] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  8 16:15:25 pelle kernel: [    0.719457]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Sep  8 16:15:25 pelle kernel: [    0.792295] sd 0:0:0:0: [sda] Attached SCSI disk
Sep  8 16:15:25 pelle kernel: [    0.792357] Freeing unused kernel memory: 660k freed
Sep  8 16:15:25 pelle kernel: [    0.792937] Write protecting the kernel text: 4680k
Sep  8 16:15:25 pelle kernel: [    0.793073] Write protecting the kernel read-only data: 1844k
Sep  8 16:15:25 pelle kernel: [    0.829111] usb 1-5: new high speed USB device using ehci_hcd and address 2
Sep  8 16:15:25 pelle kernel: [    0.832625] udev: starting version 151
Sep  8 16:15:25 pelle kernel: [    1.126292] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep  8 16:15:25 pelle kernel: [    1.126345] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep  8 16:15:25 pelle kernel: [    1.126424] r8169 0000:02:00.0: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [    1.126504]   alloc irq_desc for 28 on node -1
Sep  8 16:15:25 pelle kernel: [    1.126511]   alloc kstat_irqs on node -1
Sep  8 16:15:25 pelle kernel: [    1.126541] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
Sep  8 16:15:25 pelle kernel: [    1.159519] eth0: RTL8102e at 0xf804e000, 00:23:8b:0a:17:9d, XID 04a00000 IRQ 28
Sep  8 16:15:25 pelle kernel: [    1.174846] usb 1-5: configuration #1 chosen from 1 choice
Sep  8 16:15:25 pelle kernel: [    1.619465] EXT4-fs (sda1): mounted filesystem with ordered data mode
Sep  8 16:15:25 pelle kernel: [    1.633079] usb 4-2: new full speed USB device using uhci_hcd and address 2
Sep  8 16:15:25 pelle kernel: [    1.793969] usb 4-2: configuration #1 chosen from 1 choice
Sep  8 16:15:25 pelle kernel: [    3.545860] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 16:15:25 pelle kernel: [    3.545875] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 16:15:25 pelle kernel: [    3.552367] atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
Sep  8 16:15:25 pelle kernel: [    3.552384] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
Sep  8 16:15:25 pelle kernel: [    9.293929] udev: starting version 151
Sep  8 16:15:25 pelle kernel: [    9.312136] Adding 975864k swap on /dev/sda5.  Priority:-1 extents:1 across:975864k 
Sep  8 16:15:25 pelle kernel: [    9.472678] lp: driver loaded but no devices found
Sep  8 16:15:25 pelle kernel: [    9.840454] Linux agpgart interface v0.103
Sep  8 16:15:25 pelle kernel: [    9.909179] intel_rng: FWH not detected
Sep  8 16:15:25 pelle kernel: [   10.048334] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
Sep  8 16:15:25 pelle kernel: [   10.048599] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
Sep  8 16:15:25 pelle kernel: [   10.051418] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
Sep  8 16:15:25 pelle kernel: [   10.097433] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
Sep  8 16:15:25 pelle kernel: [   10.097579] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
Sep  8 16:15:25 pelle kernel: [   10.113847] hso: /build/buildd/linux-2.6.32/drivers/net/usb/hso.c: 1.2 Option Wireless
Sep  8 16:15:25 pelle kernel: [   10.121667] hso0: Disabled Privacy Extensions
Sep  8 16:15:25 pelle kernel: [   10.124004] usbcore: registered new interface driver hso
Sep  8 16:15:25 pelle kernel: [   10.149099] acer-wmi: Acer Laptop ACPI-WMI Extras
Sep  8 16:15:25 pelle kernel: [   10.149112] acer-wmi: Blacklisted hardware detected - not loading
Sep  8 16:15:25 pelle kernel: [   10.189018] Linux video capture interface: v2.00
Sep  8 16:15:25 pelle kernel: [   10.301828] type=1505 audit(1283951725.107:2):  operation="profile_load" pid=578 name="/sbin/dhclient3"
Sep  8 16:15:25 pelle kernel: [   10.303029] type=1505 audit(1283951725.107:3):  operation="profile_load" pid=578 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 16:15:25 pelle kernel: [   10.303716] type=1505 audit(1283951725.107:4):  operation="profile_load" pid=578 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 16:15:25 pelle kernel: [   10.333860] [drm] Initialized drm 1.1.0 20060810
Sep  8 16:15:25 pelle kernel: [   10.360532] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Sep  8 16:15:25 pelle kernel: [   10.367926] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
Sep  8 16:15:25 pelle kernel: [   10.368228] usbcore: registered new interface driver uvcvideo
Sep  8 16:15:25 pelle kernel: [   10.368240] USB Video Class driver (v0.1.0)
Sep  8 16:15:25 pelle kernel: [   10.446313] cfg80211: Calling CRDA to update world regulatory domain
Sep  8 16:15:25 pelle kernel: [   10.536838] cfg80211: World regulatory domain updated:
Sep  8 16:15:25 pelle kernel: [   10.536849] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep  8 16:15:25 pelle kernel: [   10.536859] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 16:15:25 pelle kernel: [   10.536867] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 16:15:25 pelle kernel: [   10.536876] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep  8 16:15:25 pelle kernel: [   10.536884] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 16:15:25 pelle kernel: [   10.536893] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep  8 16:15:25 pelle kernel: [   10.538214] acerhdf: Acer Aspire One Fan driver, v.0.5.20
Sep  8 16:15:25 pelle kernel: [   10.538229] acerhdf: Fan control off, to enable do:
Sep  8 16:15:25 pelle kernel: [   10.538235] acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
Sep  8 16:15:25 pelle kernel: [   10.700901] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 16:15:25 pelle kernel: [   10.700916] i915 0000:00:02.0: setting latency timer to 64
Sep  8 16:15:25 pelle kernel: [   10.792079] mtrr: no more MTRRs available
Sep  8 16:15:25 pelle kernel: [   10.792091] [drm] MTRR allocation failed.  Graphics performance may suffer.
Sep  8 16:15:25 pelle kernel: [   10.799356] [drm] set up 7M of stolen space
Sep  8 16:15:25 pelle kernel: [   10.905092] [drm] initialized overlay support
Sep  8 16:15:25 pelle NetworkManager: <info>  starting...
Sep  8 16:15:25 pelle NetworkManager: <info>  Trying to start the modem-manager...
Sep  8 16:15:25 pelle NetworkManager:    SCPlugin-Ifupdown: init!
Sep  8 16:15:25 pelle NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Sep  8 16:15:25 pelle NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Sep  8 16:15:25 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0)
Sep  8 16:15:25 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Sep  8 16:15:25 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0)
Sep  8 16:15:25 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/net/hso0, iface: hso0): no ifupdown configuration found.
Sep  8 16:15:25 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Sep  8 16:15:25 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Sep  8 16:15:25 pelle NetworkManager:    SCPlugin-Ifupdown: end _init.
Sep  8 16:15:25 pelle NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Sep  8 16:15:25 pelle NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep  8 16:15:25 pelle NetworkManager: <info>  Found wwan radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/rfkill/rfkill0) (driver usb)
Sep  8 16:15:25 pelle NetworkManager: <info>  WiFi enabled by radio killswitch; disabled by state file
Sep  8 16:15:25 pelle NetworkManager: <info>  WWAN enabled by radio killswitch; disabled by state file
Sep  8 16:15:25 pelle NetworkManager:    SCPlugin-Ifupdown: (139825392) ... get_connections.
Sep  8 16:15:25 pelle NetworkManager:    SCPlugin-Ifupdown: (139825392) ... get_connections (managed=false): return empty list.
Sep  8 16:15:25 pelle modem-manager: Loaded plugin MotoC
Sep  8 16:15:25 pelle modem-manager: Loaded plugin Gobi
Sep  8 16:15:25 pelle modem-manager: Loaded plugin Huawei
Sep  8 16:15:25 pelle modem-manager: Loaded plugin Nokia
Sep  8 16:15:25 pelle modem-manager: Loaded plugin ZTE
Sep  8 16:15:25 pelle modem-manager: Loaded plugin Option
Sep  8 16:15:25 pelle modem-manager: Loaded plugin Sierra
Sep  8 16:15:25 pelle modem-manager: Loaded plugin Novatel
Sep  8 16:15:25 pelle modem-manager: Loaded plugin Ericsson MBM
Sep  8 16:15:25 pelle modem-manager: Loaded plugin Generic
Sep  8 16:15:25 pelle modem-manager: Loaded plugin Option High-Speed
Sep  8 16:15:25 pelle modem-manager: Loaded plugin AnyData
Sep  8 16:15:25 pelle modem-manager: Loaded plugin Longcheer
Sep  8 16:15:26 pelle NetworkManager:    Ifupdown: get unmanaged devices count: 0
Sep  8 16:15:26 pelle NetworkManager: <info>  (eth0): carrier is OFF
Sep  8 16:15:26 pelle NetworkManager: <info>  (eth0): new Ethernet device (driver: 'r8169')
Sep  8 16:15:26 pelle NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep  8 16:15:26 pelle NetworkManager: <info>  (eth0): now managed
Sep  8 16:15:26 pelle NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Sep  8 16:15:26 pelle NetworkManager: <info>  (eth0): bringing up device.
Sep  8 16:15:26 pelle kernel: [   11.231441] r8169: eth0: link down
Sep  8 16:15:26 pelle kernel: [   11.232876] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep  8 16:15:26 pelle modem-manager: (ttyHS0) opening serial device...
Sep  8 16:15:26 pelle modem-manager: (ttyHS0): probe requested by plugin 'Option High-Speed'
Sep  8 16:15:26 pelle modem-manager: (ttyHS1) opening serial device...
Sep  8 16:15:26 pelle modem-manager: (ttyHS1): probe requested by plugin 'Option High-Speed'
Sep  8 16:15:26 pelle modem-manager: (ttyHS2) opening serial device...
Sep  8 16:15:26 pelle modem-manager: (ttyHS2): probe requested by plugin 'Option High-Speed'
Sep  8 16:15:26 pelle modem-manager: (ttyHS3) opening serial device...
Sep  8 16:15:26 pelle modem-manager: (ttyHS3): probe requested by plugin 'Option High-Speed'
Sep  8 16:15:26 pelle NetworkManager: <info>  (eth0): preparing device.
Sep  8 16:15:26 pelle NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Sep  8 16:15:26 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port hso0
Sep  8 16:15:26 pelle modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2
Sep  8 16:15:26 pelle NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0
Sep  8 16:15:26 pelle NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Sep  8 16:15:26 pelle NetworkManager: <info>  modem-manager is now available
Sep  8 16:15:26 pelle NetworkManager: <info>  Trying to start the supplicant...
Sep  8 16:15:26 pelle kernel: [   11.356760] type=1505 audit(1283951726.163:5):  operation="profile_load" pid=730 name="/usr/share/gdm/guest-session/Xsession"
Sep  8 16:15:26 pelle kernel: [   11.378530] type=1505 audit(1283951726.183:6):  operation="profile_replace" pid=734 name="/sbin/dhclient3"
Sep  8 16:15:26 pelle kernel: [   11.379320] type=1505 audit(1283951726.183:7):  operation="profile_replace" pid=734 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Sep  8 16:15:26 pelle kernel: [   11.379770] type=1505 audit(1283951726.183:8):  operation="profile_replace" pid=734 name="/usr/lib/connman/scripts/dhclient-script"
Sep  8 16:15:26 pelle kernel: [   11.388613] type=1505 audit(1283951726.195:9):  operation="profile_load" pid=736 name="/usr/bin/evince"
Sep  8 16:15:26 pelle kernel: [   11.399926] type=1505 audit(1283951726.203:10):  operation="profile_load" pid=736 name="/usr/bin/evince-previewer"
Sep  8 16:15:26 pelle kernel: [   11.404498] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
Sep  8 16:15:26 pelle kernel: [   11.406360] fb0: inteldrmfb frame buffer device
Sep  8 16:15:26 pelle kernel: [   11.406367] registered panic notifier
Sep  8 16:15:26 pelle kernel: [   11.406385] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep  8 16:15:26 pelle kernel: [   11.407640] type=1505 audit(1283951726.211:11):  operation="profile_load" pid=736 name="/usr/bin/evince-thumbnailer"
Sep  8 16:15:26 pelle kernel: [   11.451686] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Sep  8 16:15:26 pelle kernel: [   11.451747] ath5k 0000:03:00.0: setting latency timer to 64
Sep  8 16:15:26 pelle kernel: [   11.451844] ath5k 0000:03:00.0: registered as 'phy0'
Sep  8 16:15:26 pelle kernel: [   11.483030] vga16fb: initializing
Sep  8 16:15:26 pelle kernel: [   11.483041] vga16fb: mapped to 0xc00a0000
Sep  8 16:15:26 pelle kernel: [   11.483062] vga16fb: not registering due to another framebuffer present
Sep  8 16:15:26 pelle kernel: [   11.490079] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep  8 16:15:26 pelle kernel: [   11.490149] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep  8 16:15:26 pelle kernel: [   11.541000] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Sep  8 16:15:26 pelle kernel: [   11.834286] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Sep  8 16:15:26 pelle kernel: [   11.872178] Console: switching to colour frame buffer device 128x37
Sep  8 16:15:26 pelle kernel: [   11.964878] ath: EEPROM regdomain: 0x65
Sep  8 16:15:26 pelle kernel: [   11.964888] ath: EEPROM indicates we should expect a direct regpair map
Sep  8 16:15:26 pelle kernel: [   11.964900] ath: Country alpha2 being used: 00
Sep  8 16:15:26 pelle kernel: [   11.964907] ath: Regpair used: 0x65
Sep  8 16:15:26 pelle kernel: [   12.067134] phy0: Selected rate control algorithm 'minstrel'
Sep  8 16:15:26 pelle kernel: [   12.069938] Registered led device: ath5k-phy0::rx
Sep  8 16:15:26 pelle kernel: [   12.070006] Registered led device: ath5k-phy0::tx
Sep  8 16:15:26 pelle kernel: [   12.070017] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Sep  8 16:15:26 pelle NetworkManager: <info>  Found wlan radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill1) (driver <unknown>)
Sep  8 16:15:26 pelle NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0)
Sep  8 16:15:26 pelle NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Sep  8 16:15:27 pelle NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
Sep  8 16:15:27 pelle NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'ath5k')
Sep  8 16:15:27 pelle NetworkManager: <info>  (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Sep  8 16:15:27 pelle NetworkManager: <info>  (wlan0): now managed
Sep  8 16:15:27 pelle NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Sep  8 16:15:27 pelle NetworkManager: <info>  (wlan0): bringing up device.
Sep  8 16:15:27 pelle kernel: [   12.618667] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep  8 16:15:27 pelle NetworkManager: <info>  (wlan0): preparing device.
Sep  8 16:15:27 pelle NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Sep  8 16:15:27 pelle NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready
Sep  8 16:15:27 pelle NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 42)
Sep  8 16:15:27 pelle kernel: [   12.830789] ppdev: user-space parallel port driver
Sep  8 16:15:28 pelle kernel: [   13.574962] CPU0 attaching NULL sched-domain.
Sep  8 16:15:28 pelle kernel: [   13.574978] CPU1 attaching NULL sched-domain.
Sep  8 16:15:28 pelle kernel: [   13.609183] CPU0 attaching sched-domain:
Sep  8 16:15:28 pelle kernel: [   13.609194]  domain 0: span 0-1 level SIBLING
Sep  8 16:15:28 pelle kernel: [   13.609203]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 16:15:28 pelle kernel: [   13.609221]   domain 1: span 0-1 level MC
Sep  8 16:15:28 pelle kernel: [   13.609228]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:15:28 pelle kernel: [   13.609243] CPU1 attaching sched-domain:
Sep  8 16:15:28 pelle kernel: [   13.609250]  domain 0: span 0-1 level SIBLING
Sep  8 16:15:28 pelle kernel: [   13.609258]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 16:15:28 pelle kernel: [   13.609274]   domain 1: span 0-1 level MC
Sep  8 16:15:28 pelle kernel: [   13.609281]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:15:29 pelle modem-manager: (ttyHS0) closing serial device...
Sep  8 16:15:29 pelle modem-manager: (ttyHS1) closing serial device...
Sep  8 16:15:29 pelle modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 as /org/freedesktop/ModemManager/Modems/0
Sep  8 16:15:29 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS0
Sep  8 16:15:29 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS1
Sep  8 16:15:29 pelle modem-manager: (ttyHS3) closing serial device...
Sep  8 16:15:29 pelle modem-manager: (Option High-Speed): GSM modem /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2 claimed port ttyHS3
Sep  8 16:15:29 pelle NetworkManager: <info>  (hso0): new GSM device (driver: 'hso')
Sep  8 16:15:29 pelle NetworkManager: <info>  (hso0): exported as /org/freedesktop/NetworkManager/Devices/2
Sep  8 16:15:29 pelle NetworkManager: <info>  (hso0): now managed
Sep  8 16:15:29 pelle NetworkManager: <info>  (hso0): device state change: 1 -> 2 (reason 2)
Sep  8 16:15:29 pelle NetworkManager: <info>  (hso0): deactivating device (reason: 2).
Sep  8 16:15:29 pelle NetworkManager: <info>  (hso0): device state change: 2 -> 3 (reason 0)
Sep  8 16:15:31 pelle kernel: [   16.770067] CPU0 attaching NULL sched-domain.
Sep  8 16:15:31 pelle kernel: [   16.770083] CPU1 attaching NULL sched-domain.
Sep  8 16:15:31 pelle kernel: [   16.792169] CPU0 attaching sched-domain:
Sep  8 16:15:31 pelle kernel: [   16.792181]  domain 0: span 0-1 level SIBLING
Sep  8 16:15:31 pelle kernel: [   16.792190]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 16:15:31 pelle kernel: [   16.792208]   domain 1: span 0-1 level MC
Sep  8 16:15:31 pelle kernel: [   16.792216]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:15:31 pelle kernel: [   16.792233] CPU1 attaching sched-domain:
Sep  8 16:15:31 pelle kernel: [   16.792240]  domain 0: span 0-1 level SIBLING
Sep  8 16:15:31 pelle kernel: [   16.792248]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 16:15:31 pelle kernel: [   16.792265]   domain 1: span 0-1 level MC
Sep  8 16:15:31 pelle kernel: [   16.792273]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:15:40 pelle modem-manager: (ttyHS2) closing serial device...
Sep  8 16:15:45 pelle NetworkManager: <info>  Activation (wlan0) starting connection 'Auto Vappugospel XXL toimisto'
Sep  8 16:15:45 pelle NetworkManager: <info>  (wlan0): device state change: 3 -> 4 (reason 0)
Sep  8 16:15:45 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep  8 16:15:45 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep  8 16:15:45 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep  8 16:15:45 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep  8 16:15:45 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep  8 16:15:45 pelle NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Sep  8 16:15:45 pelle NetworkManager: <info>  Activation (wlan0/wireless): access point 'Auto Vappugospel XXL toimisto' has security, but secrets are required.
Sep  8 16:15:45 pelle NetworkManager: <info>  (wlan0): device state change: 5 -> 6 (reason 0)
Sep  8 16:15:45 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep  8 16:16:01 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Sep  8 16:16:01 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Sep  8 16:16:01 pelle NetworkManager: <info>  (wlan0): device state change: 6 -> 4 (reason 0)
Sep  8 16:16:01 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Sep  8 16:16:01 pelle NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Sep  8 16:16:01 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Sep  8 16:16:01 pelle NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Sep  8 16:16:01 pelle NetworkManager: <info>  Activation (wlan0/wireless): connection 'Auto Vappugospel XXL toimisto' has security, and secrets exist.  No new secrets needed.
Sep  8 16:16:01 pelle NetworkManager: <info>  Config: added 'ssid' value 'Vappugospel XXL toimisto'
Sep  8 16:16:01 pelle NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Sep  8 16:16:01 pelle NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
Sep  8 16:16:01 pelle NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Sep  8 16:16:01 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  8 16:16:01 pelle NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Sep  8 16:16:01 pelle NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Sep  8 16:16:01 pelle NetworkManager: <info>  Config: set interface ap_scan to 1
Sep  8 16:16:01 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  inactive -> scanning
Sep  8 16:17:00 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> associating
Sep  8 16:17:00 pelle kernel: [  105.397978] wlan0: direct probe to AP 00:26:f2:13:42:90 (try 1)
Sep  8 16:17:00 pelle kernel: [  105.398093] wlan0: deauthenticating from 00:26:f2:13:42:90 by local choice (reason=3)
Sep  8 16:17:00 pelle kernel: [  105.398201] wlan0: direct probe to AP 00:26:f2:13:42:90 (try 1)
Sep  8 16:17:00 pelle kernel: [  105.402249] wlan0: direct probe responded
Sep  8 16:17:00 pelle kernel: [  105.402262] wlan0: authenticate with AP 00:26:f2:13:42:90 (try 1)
Sep  8 16:17:00 pelle kernel: [  105.407657] wlan0: authenticated
Sep  8 16:17:00 pelle kernel: [  105.407719] wlan0: associate with AP 00:26:f2:13:42:90 (try 1)
Sep  8 16:17:00 pelle kernel: [  105.410038] wlan0: RX AssocResp from 00:26:f2:13:42:90 (capab=0x411 status=0 aid=2)
Sep  8 16:17:00 pelle kernel: [  105.410049] wlan0: associated
Sep  8 16:17:00 pelle kernel: [  105.411879] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sep  8 16:17:00 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  associating -> associated
Sep  8 16:17:00 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  associated -> 4-way handshake
Sep  8 16:17:00 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  4-way handshake -> group handshake
Sep  8 16:17:00 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  group handshake -> completed
Sep  8 16:17:00 pelle NetworkManager: <info>  Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'Vappugospel XXL toimisto'.
Sep  8 16:17:00 pelle NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Sep  8 16:17:00 pelle NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Sep  8 16:17:00 pelle NetworkManager: <info>  (wlan0): device state change: 5 -> 7 (reason 0)
Sep  8 16:17:00 pelle NetworkManager: <info>  Activation (wlan0) Beginning DHCP transaction (timeout in 45 seconds)
Sep  8 16:17:00 pelle NetworkManager: <info>  dhclient started with pid 1591
Sep  8 16:17:00 pelle NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) scheduled...
Sep  8 16:17:00 pelle NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Sep  8 16:17:00 pelle NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) started...
Sep  8 16:17:00 pelle NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) complete.
Sep  8 16:17:00 pelle dhclient: Internet Systems Consortium DHCP Client V3.1.3
Sep  8 16:17:00 pelle dhclient: Copyright 2004-2009 Internet Systems Consortium.
Sep  8 16:17:00 pelle dhclient: All rights reserved.
Sep  8 16:17:00 pelle dhclient: For info, please visit https://www.isc.org/software/dhcp/
Sep  8 16:17:00 pelle dhclient: 
Sep  8 16:17:00 pelle NetworkManager: <info>  DHCP: device wlan0 state changed (null) -> preinit
Sep  8 16:17:00 pelle dhclient: Listening on LPF/wlan0/00:23:4d:b0:28:fb
Sep  8 16:17:00 pelle dhclient: Sending on   LPF/wlan0/00:23:4d:b0:28:fb
Sep  8 16:17:00 pelle dhclient: Sending on   Socket/fallback
Sep  8 16:17:03 pelle dhclient: DHCPREQUEST of 192.168.1.2 on wlan0 to 255.255.255.255 port 67
Sep  8 16:17:05 pelle kernel: [  110.304157] No probe response from AP 00:26:f2:13:42:90 after 500ms, disconnecting.
Sep  8 16:17:05 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  completed -> disconnected
Sep  8 16:17:05 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  disconnected -> scanning
Sep  8 16:17:06 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> associating
Sep  8 16:17:06 pelle kernel: [  111.808513] wlan0: direct probe to AP 00:26:f2:13:42:90 (try 1)
Sep  8 16:17:06 pelle kernel: [  111.811009] wlan0: direct probe responded
Sep  8 16:17:06 pelle kernel: [  111.811022] wlan0: authenticate with AP 00:26:f2:13:42:90 (try 1)
Sep  8 16:17:06 pelle kernel: [  111.813285] wlan0: authenticated
Sep  8 16:17:06 pelle kernel: [  111.813356] wlan0: associate with AP 00:26:f2:13:42:90 (try 1)
Sep  8 16:17:06 pelle kernel: [  111.815758] wlan0: RX AssocResp from 00:26:f2:13:42:90 (capab=0x411 status=0 aid=2)
Sep  8 16:17:06 pelle kernel: [  111.815774] wlan0: associated
Sep  8 16:17:06 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  associating -> associated
Sep  8 16:17:07 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  associated -> 4-way handshake
Sep  8 16:17:07 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  4-way handshake -> group handshake
Sep  8 16:17:07 pelle NetworkManager: <info>  (wlan0): supplicant connection state:  group handshake -> completed
Sep  8 16:17:10 pelle dhclient: DHCPREQUEST of 192.168.1.2 on wlan0 to 255.255.255.255 port 67
Sep  8 16:17:10 pelle dhclient: DHCPACK of 192.168.1.2 from 192.168.1.1
Sep  8 16:17:10 pelle dhclient: bound to 192.168.1.2 -- renewal in 40222 seconds.
Sep  8 16:17:10 pelle NetworkManager: <info>  DHCP: device wlan0 state changed preinit -> reboot
Sep  8 16:17:10 pelle NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Sep  8 16:17:10 pelle NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Sep  8 16:17:10 pelle NetworkManager: <info>    address 192.168.1.2
Sep  8 16:17:10 pelle NetworkManager: <info>    prefix 24 (255.255.255.0)
Sep  8 16:17:10 pelle NetworkManager: <info>    gateway 192.168.1.1
Sep  8 16:17:10 pelle NetworkManager: <info>    nameserver '192.168.1.1'
Sep  8 16:17:10 pelle NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Sep  8 16:17:10 pelle NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Sep  8 16:17:10 pelle NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Sep  8 16:17:11 pelle NetworkManager: <info>  (wlan0): device state change: 7 -> 8 (reason 0)
Sep  8 16:17:11 pelle NetworkManager: <info>  Policy set 'Auto Vappugospel XXL toimisto' (wlan0) as default for routing and DNS.
Sep  8 16:17:11 pelle NetworkManager: <info>  Activation (wlan0) successful, device activated.
Sep  8 16:17:11 pelle NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Sep  8 16:17:11 pelle kernel: [  116.277038] wlan0: no IPv6 routers present
Sep  8 16:18:55 pelle kernel: [  220.364694] CPU0 attaching NULL sched-domain.
Sep  8 16:18:55 pelle kernel: [  220.364711] CPU1 attaching NULL sched-domain.
Sep  8 16:18:55 pelle kernel: [  220.381242] CPU0 attaching sched-domain:
Sep  8 16:18:55 pelle kernel: [  220.381258]  domain 0: span 0-1 level SIBLING
Sep  8 16:18:55 pelle kernel: [  220.381271]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
Sep  8 16:18:55 pelle kernel: [  220.381297]   domain 1: span 0-1 level MC
Sep  8 16:18:55 pelle kernel: [  220.381308]    groups: 0-1 (cpu_power = 1178)
Sep  8 16:18:55 pelle kernel: [  220.381330] CPU1 attaching sched-domain:
Sep  8 16:18:55 pelle kernel: [  220.381340]  domain 0: span 0-1 level SIBLING
Sep  8 16:18:55 pelle kernel: [  220.381351]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
Sep  8 16:18:55 pelle kernel: [  220.381374]   domain 1: span 0-1 level MC
Sep  8 16:18:55 pelle kernel: [  220.381384]    groups: 0-1 (cpu_power = 1178)