| 2008-09-13 16:04:48 |
huepfend_schof |
bug |
|
|
added bug |
| 2008-09-13 17:54:16 |
huepfend_schof |
title |
ZTE MF628 HSDPAUSB modem not recognized by network-manager |
ZTE MF628 HSDPA USB modem not recognized by network-manager 0.7 |
|
| 2008-09-13 17:55:20 |
huepfend_schof |
description |
Binary package hint: network-manager
My HSDPA USB Modem is the MF628 from ZTE.
I installed the alpha 5 of ubuntu intrepid, which uses the kernel 2.6.27 where the modem driver is included. But with the Network-manager(version 0.7) I can't connect this modem.
Some more information:
"lsusb -vvv" gives this output:
Bus 003 Device 002: ID 19d2:0015
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x19d2
idProduct 0x0015
bcdDevice 0.00
iManufacturer 1 Qualcomm, Incorporated
iProduct 2 ZTE CDMA Technologies MSM
iSerial 3 Data Interface
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 108
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 128
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
==========================================================
"lshal" gives this output:
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.vendor = 'Qualcomm, Incorporated' (string)
linux.device_file = '/dev/bus/usb/003/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 0 (0x0) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string)
usb_device.max_power = 500 (0x1f4) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 4 (0x4) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'ZTE CDMA Technologies MSM' (string)
usb_device.product_id = 21 (0x15) (int)
usb_device.serial = 'Data Interface' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Qualcomm, Incorporated' (string)
usb_device.vendor_id = 6610 (0x19d2) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3'
info.linux.driver = 'option' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.3' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.description = 'Data Interface' (string)
usb.interface.number = 3 (0x3) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.3' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3_serial_usb_2'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3_serial_usb_2' (string)
linux.device_file = '/dev/ttyUSB2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyUSB2' (string)
serial.device = '/dev/ttyUSB2' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3' (string)
serial.port = 2 (0x2) (int)
serial.type = 'usb' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2'
info.linux.driver = 'option' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.description = 'Data Interface' (string)
usb.interface.number = 2 (0x2) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2_serial_usb_1'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2_serial_usb_1' (string)
linux.device_file = '/dev/ttyUSB1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyUSB1' (string)
serial.device = '/dev/ttyUSB1' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2' (string)
serial.port = 1 (0x1) (int)
serial.type = 'usb' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1'
info.linux.driver = 'option' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.description = 'Data Interface' (string)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1_serial_usb_0'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1_serial_usb_0' (string)
linux.device_file = '/dev/ttyUSB0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyUSB0' (string)
serial.device = '/dev/ttyUSB0' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1' (string)
serial.port = 0 (0x0) (int)
serial.type = 'usb' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0'
info.linux.driver = 'usb-storage' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Mass Storage Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 8 (0x8) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 80 (0x50) (int)
usb.interface.subclass = 6 (0x6) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Mass Storage Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host3' (string)
scsi_host.host = 3 (0x3) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host3/target3:0:0/3:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 3 (0x3) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'MMC Storage' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ZTE' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_ZTE_MMC_Storage_Data_Interface_0_0'
access_control.file = '/dev/sdc' (string)
access_control.type = 'removable-block' (string)
block.device = '/dev/sdc' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 32 (0x20) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_ZTE_MMC_Storage_Data_Interface_0_0' (string)
info.addons = {'hald-addon-storage'} (string list)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'storage', 'block', 'access_control'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'MMC Storage' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_ZTE_MMC_Storage_Data_Interface_0_0' (string)
info.vendor = 'ZTE' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdc' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'usb' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = '2.31' (string)
storage.hotpluggable = true (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'MMC Storage' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = false (bool)
storage.serial = 'ZTE_MMC_Storage_Data_Interface-0:0' (string)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'ZTE' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/class/scsi_generic/sg3' (string)
scsi_generic.device = '/dev/sg3' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.1' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
=================================================================
I tried to connect manually:
First I used this command: "sudo modprobe usbserial vendor=0x19d2 product=0x0015"
With "sudo chat -s -f probe.txt >/dev/ttyUSB0 </dev/ttyUSB0" I receive:
chat: Sep 13 17:17:31 +GCAP: +CGSM,+DS,+ES
chat: Sep 13 17:17:31 +COPS: 0,0,"Connect Austria",2
chat: Sep 13 17:17:31 +CREG: 0,1
Then I tried to connect with vwdialrc:
So I first created the file ".wvdialrc":
[Dialer cellular]
# This configuration should work for most cellular modems and
# USB or bluetooth connected mobile phones.
# Your modem device. Usually /dev/ttyUSB0 or /dev/ttyACM0
# Bluetooth devices use an rfcomm device (/dev/rfcomm0, etc) that must be set
# up first.
#
#Modem = /dev/ttyACM0
Modem = /dev/ttyUSB0
#Modem = /dev/rfcomm0
#Modem = /dev/ttyACM0
# Port speeds that're worth testing:
# 921600
# 460800
# 115200
# 57600
Baud = 115200
# If your SIM card has a PIN, comment this line, uncomment the next one, and
# change the PIN shown to your PIN.
Init = ATZ
# Init = ATZ+CPIN="0000"
# If you know your ISP's APN, specify it instead of YOUR_ISP_APN below.
# If you don't, you may be able to find out on the 'net, or from tech
# support.
#
# There's also an APN table at https://wiki.ubuntu.com/NetworkManager/Hardware/3G .
#
# If you can't find it, you might be able to dial out without setting an APN
# (especially from a mobile phone). Just comment this line and uncomment
# the next one.
#Init2 = AT+CGDCONT=1,"IP","YOUR_ISP_APN"
Init2 = AT+CGDCONT=1,"IP"
# Most services/devices dial with *99# . A few seem to require *99***1#
Phone = *99#
# These often suffice, but your ISP might require different details. They're
# often dummy details used for all users on the ISP, frequently the ISP's
# name, but some ISP's do require you to use a real username and password.
Username = dummy
Password = dummy
=================================
Then I receive with the command: "sudo wvdial cellular":
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: AT+CGDCONT=1,"IP"
AT+CGDCONT=1,"IP"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Waiting for prompt.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Sat Sep 13 17:26:25 2008
--> Pid of pppd: 6352
--> Using interface ppp0
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> local IP address 10.108.81.55
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> remote IP address 10.64.64.64
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> primary DNS address 81.3.216.100
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> secondary DNS address 194.24.128.100
--> pppd: �[1b]� �[1b]� @4� �[1b]�
But I could still not use the internet. |
Binary package hint: network-manager
My HSDPA USB Modem is the MF628 from ZTE.
I installed the alpha 5 of ubuntu intrepid, which uses the kernel 2.6.27 where the modem driver is included. But with the Network-manager(version 0.7) I can't connect this modem.
Some more information:
"lsusb -vvv" gives this output:
Bus 003 Device 002: ID 19d2:0015
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x19d2
idProduct 0x0015
bcdDevice 0.00
iManufacturer 1 Qualcomm, Incorporated
iProduct 2 ZTE CDMA Technologies MSM
iSerial 3 Data Interface
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 108
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 128
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
==========================================================
"lshal" gives this output:
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.vendor = 'Qualcomm, Incorporated' (string)
linux.device_file = '/dev/bus/usb/003/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 0 (0x0) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string)
usb_device.max_power = 500 (0x1f4) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 4 (0x4) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'ZTE CDMA Technologies MSM' (string)
usb_device.product_id = 21 (0x15) (int)
usb_device.serial = 'Data Interface' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Qualcomm, Incorporated' (string)
usb_device.vendor_id = 6610 (0x19d2) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3'
info.linux.driver = 'option' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.3' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.description = 'Data Interface' (string)
usb.interface.number = 3 (0x3) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.3' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3_serial_usb_2'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3_serial_usb_2' (string)
linux.device_file = '/dev/ttyUSB2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyUSB2' (string)
serial.device = '/dev/ttyUSB2' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3' (string)
serial.port = 2 (0x2) (int)
serial.type = 'usb' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2'
info.linux.driver = 'option' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.description = 'Data Interface' (string)
usb.interface.number = 2 (0x2) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2_serial_usb_1'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2_serial_usb_1' (string)
linux.device_file = '/dev/ttyUSB1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyUSB1' (string)
serial.device = '/dev/ttyUSB1' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2' (string)
serial.port = 1 (0x1) (int)
serial.type = 'usb' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1'
info.linux.driver = 'option' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.description = 'Data Interface' (string)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1_serial_usb_0'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1_serial_usb_0' (string)
linux.device_file = '/dev/ttyUSB0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyUSB0' (string)
serial.device = '/dev/ttyUSB0' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1' (string)
serial.port = 0 (0x0) (int)
serial.type = 'usb' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0'
info.linux.driver = 'usb-storage' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Mass Storage Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 8 (0x8) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 80 (0x50) (int)
usb.interface.subclass = 6 (0x6) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Mass Storage Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host3' (string)
scsi_host.host = 3 (0x3) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host3/target3:0:0/3:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 3 (0x3) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'MMC Storage' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ZTE' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_ZTE_MMC_Storage_Data_Interface_0_0'
access_control.file = '/dev/sdc' (string)
access_control.type = 'removable-block' (string)
block.device = '/dev/sdc' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 32 (0x20) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_ZTE_MMC_Storage_Data_Interface_0_0' (string)
info.addons = {'hald-addon-storage'} (string list)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'storage', 'block', 'access_control'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'MMC Storage' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_ZTE_MMC_Storage_Data_Interface_0_0' (string)
info.vendor = 'ZTE' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdc' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'usb' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = '2.31' (string)
storage.hotpluggable = true (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'MMC Storage' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = false (bool)
storage.serial = 'ZTE_MMC_Storage_Data_Interface-0:0' (string)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'ZTE' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/class/scsi_generic/sg3' (string)
scsi_generic.device = '/dev/sg3' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.1' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
=================================================================
I tried to connect manually:
First I used this command: "sudo modprobe usbserial vendor=0x19d2 product=0x0015"
With "sudo chat -s -f probe.txt >/dev/ttyUSB0 </dev/ttyUSB0" I receive:
chat: Sep 13 17:17:31 +GCAP: +CGSM,+DS,+ES
chat: Sep 13 17:17:31 +COPS: 0,0,"Connect Austria",2
chat: Sep 13 17:17:31 +CREG: 0,1
Then I tried to connect with vwdialrc:
So I first created the file ".wvdialrc":
[Dialer cellular]
# This configuration should work for most cellular modems and
# USB or bluetooth connected mobile phones.
# Your modem device. Usually /dev/ttyUSB0 or /dev/ttyACM0
# Bluetooth devices use an rfcomm device (/dev/rfcomm0, etc) that must be set
# up first.
#
#Modem = /dev/ttyACM0
Modem = /dev/ttyUSB0
#Modem = /dev/rfcomm0
#Modem = /dev/ttyACM0
# Port speeds that're worth testing:
# 921600
# 460800
# 115200
# 57600
Baud = 115200
# If your SIM card has a PIN, comment this line, uncomment the next one, and
# change the PIN shown to your PIN.
Init = ATZ
# Init = ATZ+CPIN="0000"
# If you know your ISP's APN, specify it instead of YOUR_ISP_APN below.
# If you don't, you may be able to find out on the 'net, or from tech
# support.
#
# There's also an APN table at https://wiki.ubuntu.com/NetworkManager/Hardware/3G .
#
# If you can't find it, you might be able to dial out without setting an APN
# (especially from a mobile phone). Just comment this line and uncomment
# the next one.
Init2 = AT+CGDCONT=1,"IP","web.yesss.at"
#Init2 = AT+CGDCONT=1,"IP"
# Most services/devices dial with *99# . A few seem to require *99***1#
Phone = *99#
# These often suffice, but your ISP might require different details. They're
# often dummy details used for all users on the ISP, frequently the ISP's
# name, but some ISP's do require you to use a real username and password.
Username = dummy
Password = dummy
=================================
Then I receive with the command: "sudo wvdial cellular":
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: AT+CGDCONT=1,"IP"
AT+CGDCONT=1,"IP"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Waiting for prompt.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Sat Sep 13 17:26:25 2008
--> Pid of pppd: 6352
--> Using interface ppp0
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> local IP address 10.108.81.55
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> remote IP address 10.64.64.64
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> primary DNS address 81.3.216.100
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> secondary DNS address 194.24.128.100
--> pppd: �[1b]� �[1b]� @4� �[1b]�
But I could still not use the internet. |
|
| 2008-09-14 16:41:45 |
huepfend_schof |
description |
Binary package hint: network-manager
My HSDPA USB Modem is the MF628 from ZTE.
I installed the alpha 5 of ubuntu intrepid, which uses the kernel 2.6.27 where the modem driver is included. But with the Network-manager(version 0.7) I can't connect this modem.
Some more information:
"lsusb -vvv" gives this output:
Bus 003 Device 002: ID 19d2:0015
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x19d2
idProduct 0x0015
bcdDevice 0.00
iManufacturer 1 Qualcomm, Incorporated
iProduct 2 ZTE CDMA Technologies MSM
iSerial 3 Data Interface
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 108
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 128
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
==========================================================
"lshal" gives this output:
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.vendor = 'Qualcomm, Incorporated' (string)
linux.device_file = '/dev/bus/usb/003/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 0 (0x0) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string)
usb_device.max_power = 500 (0x1f4) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 4 (0x4) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'ZTE CDMA Technologies MSM' (string)
usb_device.product_id = 21 (0x15) (int)
usb_device.serial = 'Data Interface' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Qualcomm, Incorporated' (string)
usb_device.vendor_id = 6610 (0x19d2) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3'
info.linux.driver = 'option' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.3' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.description = 'Data Interface' (string)
usb.interface.number = 3 (0x3) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.3' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3_serial_usb_2'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3_serial_usb_2' (string)
linux.device_file = '/dev/ttyUSB2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyUSB2' (string)
serial.device = '/dev/ttyUSB2' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3' (string)
serial.port = 2 (0x2) (int)
serial.type = 'usb' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2'
info.linux.driver = 'option' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.description = 'Data Interface' (string)
usb.interface.number = 2 (0x2) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2_serial_usb_1'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2_serial_usb_1' (string)
linux.device_file = '/dev/ttyUSB1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyUSB1' (string)
serial.device = '/dev/ttyUSB1' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2' (string)
serial.port = 1 (0x1) (int)
serial.type = 'usb' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1'
info.linux.driver = 'option' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.description = 'Data Interface' (string)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1_serial_usb_0'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1_serial_usb_0' (string)
linux.device_file = '/dev/ttyUSB0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyUSB0' (string)
serial.device = '/dev/ttyUSB0' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1' (string)
serial.port = 0 (0x0) (int)
serial.type = 'usb' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0'
info.linux.driver = 'usb-storage' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Mass Storage Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 8 (0x8) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 80 (0x50) (int)
usb.interface.subclass = 6 (0x6) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Mass Storage Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host3' (string)
scsi_host.host = 3 (0x3) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host3/target3:0:0/3:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 3 (0x3) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'MMC Storage' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ZTE' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_ZTE_MMC_Storage_Data_Interface_0_0'
access_control.file = '/dev/sdc' (string)
access_control.type = 'removable-block' (string)
block.device = '/dev/sdc' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 32 (0x20) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_ZTE_MMC_Storage_Data_Interface_0_0' (string)
info.addons = {'hald-addon-storage'} (string list)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'storage', 'block', 'access_control'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'MMC Storage' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_ZTE_MMC_Storage_Data_Interface_0_0' (string)
info.vendor = 'ZTE' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdc' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'usb' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = '2.31' (string)
storage.hotpluggable = true (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'MMC Storage' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = false (bool)
storage.serial = 'ZTE_MMC_Storage_Data_Interface-0:0' (string)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'ZTE' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/class/scsi_generic/sg3' (string)
scsi_generic.device = '/dev/sg3' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.1' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
=================================================================
I tried to connect manually:
First I used this command: "sudo modprobe usbserial vendor=0x19d2 product=0x0015"
With "sudo chat -s -f probe.txt >/dev/ttyUSB0 </dev/ttyUSB0" I receive:
chat: Sep 13 17:17:31 +GCAP: +CGSM,+DS,+ES
chat: Sep 13 17:17:31 +COPS: 0,0,"Connect Austria",2
chat: Sep 13 17:17:31 +CREG: 0,1
Then I tried to connect with vwdialrc:
So I first created the file ".wvdialrc":
[Dialer cellular]
# This configuration should work for most cellular modems and
# USB or bluetooth connected mobile phones.
# Your modem device. Usually /dev/ttyUSB0 or /dev/ttyACM0
# Bluetooth devices use an rfcomm device (/dev/rfcomm0, etc) that must be set
# up first.
#
#Modem = /dev/ttyACM0
Modem = /dev/ttyUSB0
#Modem = /dev/rfcomm0
#Modem = /dev/ttyACM0
# Port speeds that're worth testing:
# 921600
# 460800
# 115200
# 57600
Baud = 115200
# If your SIM card has a PIN, comment this line, uncomment the next one, and
# change the PIN shown to your PIN.
Init = ATZ
# Init = ATZ+CPIN="0000"
# If you know your ISP's APN, specify it instead of YOUR_ISP_APN below.
# If you don't, you may be able to find out on the 'net, or from tech
# support.
#
# There's also an APN table at https://wiki.ubuntu.com/NetworkManager/Hardware/3G .
#
# If you can't find it, you might be able to dial out without setting an APN
# (especially from a mobile phone). Just comment this line and uncomment
# the next one.
Init2 = AT+CGDCONT=1,"IP","web.yesss.at"
#Init2 = AT+CGDCONT=1,"IP"
# Most services/devices dial with *99# . A few seem to require *99***1#
Phone = *99#
# These often suffice, but your ISP might require different details. They're
# often dummy details used for all users on the ISP, frequently the ISP's
# name, but some ISP's do require you to use a real username and password.
Username = dummy
Password = dummy
=================================
Then I receive with the command: "sudo wvdial cellular":
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: AT+CGDCONT=1,"IP"
AT+CGDCONT=1,"IP"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Waiting for prompt.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Sat Sep 13 17:26:25 2008
--> Pid of pppd: 6352
--> Using interface ppp0
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> local IP address 10.108.81.55
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> remote IP address 10.64.64.64
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> primary DNS address 81.3.216.100
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> secondary DNS address 194.24.128.100
--> pppd: �[1b]� �[1b]� @4� �[1b]�
But I could still not use the internet. |
Binary package hint: network-manager
My HSDPA USB Modem is the MF628 from ZTE.
I installed the alpha 5 of ubuntu intrepid, which uses the kernel 2.6.27 where the modem driver is included. But with the Network-manager(version 0.7) I can't connect this modem.
Some more information:
"lsusb -vvv" gives this output:
Bus 003 Device 002: ID 19d2:0015
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x19d2
idProduct 0x0015
bcdDevice 0.00
iManufacturer 1 Qualcomm, Incorporated
iProduct 2 ZTE CDMA Technologies MSM
iSerial 3 Data Interface
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 108
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 128
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 Data Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
==========================================================
"lshal" gives this output:
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.vendor = 'Qualcomm, Incorporated' (string)
linux.device_file = '/dev/bus/usb/003/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 0 (0x0) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1' (string)
usb_device.max_power = 500 (0x1f4) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 4 (0x4) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'ZTE CDMA Technologies MSM' (string)
usb_device.product_id = 21 (0x15) (int)
usb_device.serial = 'Data Interface' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Qualcomm, Incorporated' (string)
usb_device.vendor_id = 6610 (0x19d2) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3'
info.linux.driver = 'option' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.3' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.description = 'Data Interface' (string)
usb.interface.number = 3 (0x3) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.3' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3_serial_usb_2'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3_serial_usb_2' (string)
linux.device_file = '/dev/ttyUSB2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyUSB2' (string)
serial.device = '/dev/ttyUSB2' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if3' (string)
serial.port = 2 (0x2) (int)
serial.type = 'usb' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2'
info.linux.driver = 'option' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.description = 'Data Interface' (string)
usb.interface.number = 2 (0x2) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2_serial_usb_1'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2_serial_usb_1' (string)
linux.device_file = '/dev/ttyUSB1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyUSB1' (string)
serial.device = '/dev/ttyUSB1' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if2' (string)
serial.port = 1 (0x1) (int)
serial.type = 'usb' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1'
info.linux.driver = 'option' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.description = 'Data Interface' (string)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1_serial_usb_0'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1' (string)
info.product = 'ZTE CDMA Technologies MSM' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1_serial_usb_0' (string)
linux.device_file = '/dev/ttyUSB0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyUSB0' (string)
serial.device = '/dev/ttyUSB0' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if1' (string)
serial.port = 0 (0x0) (int)
serial.type = 'usb' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0'
info.linux.driver = 'usb-storage' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface' (string)
info.product = 'USB Mass Storage Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 8 (0x8) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 80 (0x50) (int)
usb.interface.subclass = 6 (0x6) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 4 (0x4) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Mass Storage Interface' (string)
usb.product_id = 21 (0x15) (int)
usb.serial = 'Data Interface' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Qualcomm, Incorporated' (string)
usb.vendor_id = 6610 (0x19d2) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host3' (string)
scsi_host.host = 3 (0x3) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host3/target3:0:0/3:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 3 (0x3) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'MMC Storage' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ZTE' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_ZTE_MMC_Storage_Data_Interface_0_0'
access_control.file = '/dev/sdc' (string)
access_control.type = 'removable-block' (string)
block.device = '/dev/sdc' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 32 (0x20) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_ZTE_MMC_Storage_Data_Interface_0_0' (string)
info.addons = {'hald-addon-storage'} (string list)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'storage', 'block', 'access_control'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'MMC Storage' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_ZTE_MMC_Storage_Data_Interface_0_0' (string)
info.vendor = 'ZTE' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdc' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'usb' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = '2.31' (string)
storage.hotpluggable = true (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'MMC Storage' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = false (bool)
storage.serial = 'ZTE_MMC_Storage_Data_Interface-0:0' (string)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'ZTE' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_15_Data_Interface_if0_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/class/scsi_generic/sg3' (string)
scsi_generic.device = '/dev/sg3' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.1' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
=================================================================
The modem works if I connect manually
First I used this command: "sudo modprobe usbserial vendor=0x19d2 product=0x0015"
With "sudo chat -s -f probe.txt >/dev/ttyUSB0 </dev/ttyUSB0" I receive:
chat: Sep 13 17:17:31 +GCAP: +CGSM,+DS,+ES
chat: Sep 13 17:17:31 +COPS: 0,0,"Connect Austria",2
chat: Sep 13 17:17:31 +CREG: 0,1
Then I want to connect with vwdialrc:
So I first had to create the file ".wvdialrc" in the home directory:
[Dialer cellular]
# This configuration should work for most cellular modems and
# USB or bluetooth connected mobile phones.
# Your modem device. Usually /dev/ttyUSB0 or /dev/ttyACM0
# Bluetooth devices use an rfcomm device (/dev/rfcomm0, etc) that must be set
# up first.
#
#Modem = /dev/ttyACM0
Modem = /dev/ttyUSB0
#Modem = /dev/rfcomm0
#Modem = /dev/ttyACM0
# Port speeds that're worth testing:
# 921600
# 460800
# 115200
# 57600
Baud = 115200
# If your SIM card has a PIN, comment this line, uncomment the next one, and
# change the PIN shown to your PIN.
Init = ATZ
# Init = ATZ+CPIN="0000"
# If you know your ISP's APN, specify it instead of YOUR_ISP_APN below.
# If you don't, you may be able to find out on the 'net, or from tech
# support.
#
# There's also an APN table at https://wiki.ubuntu.com/NetworkManager/Hardware/3G .
#
# If you can't find it, you might be able to dial out without setting an APN
# (especially from a mobile phone). Just comment this line and uncomment
# the next one.
Init2 = AT+CGDCONT=1,"IP","web.yesss.at"
#Init2 = AT+CGDCONT=1,"IP"
# Most services/devices dial with *99# . A few seem to require *99***1#
Phone = *99#
# These often suffice, but your ISP might require different details. They're
# often dummy details used for all users on the ISP, frequently the ISP's
# name, but some ISP's do require you to use a real username and password.
Username = dummy
Password = dummy
=================================
Then I can connect to the internet with the command: "sudo wvdial cellular":
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: AT+CGDCONT=1,"IP"
AT+CGDCONT=1,"IP"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Waiting for prompt.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Sat Sep 13 17:26:25 2008
--> Pid of pppd: 6352
--> Using interface ppp0
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> local IP address 10.108.81.55
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> remote IP address 10.64.64.64
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> primary DNS address 81.3.216.100
--> pppd: �[1b]� �[1b]� @4� �[1b]�
--> secondary DNS address 194.24.128.100
--> pppd: �[1b]� �[1b]� @4� �[1b]� |
|
| 2008-09-17 01:09:10 |
Alexander Sack |
network-manager: status |
New |
Incomplete |
|
| 2008-09-17 01:09:10 |
Alexander Sack |
network-manager: importance |
Undecided |
Medium |
|
| 2008-09-17 01:09:10 |
Alexander Sack |
network-manager: statusexplanation |
|
what modem driver supports this? what is the lspci output for that device? |
|
| 2009-04-01 14:29:25 |
Mantas Kriaučiūnas |
bug task added |
|
network-manager (Baltix) |
|
| 2009-06-14 22:07:33 |
huepfend_schof |
removed subscriber huepfend_schof |
|
|
|
| 2009-09-03 21:30:36 |
Victor Vargas |
network-manager (Ubuntu): status |
Incomplete |
Confirmed |
|
| 2009-09-15 15:37:00 |
Mariano Mara |
attachment added |
|
20-zte-mf626.fdi http://launchpadlibrarian.net/31845473/20-zte-mf626.fdi |
|
| 2009-11-17 15:41:01 |
Marius B. Kotsbak |
nominated for series |
|
Ubuntu Karmic |
|
| 2009-11-17 15:41:01 |
Marius B. Kotsbak |
nominated for series |
|
Ubuntu Lucid |
|
| 2009-11-29 09:12:32 |
Guido |
removed subscriber Guido |
|
|
|
| 2009-12-11 14:52:40 |
nf2 |
bug watch added |
|
https://bugzilla.gnome.org/show_bug.cgi?id=604369 |
|
| 2010-04-12 10:06:32 |
Przemek K. |
bug task added |
|
network-manager |
|
| 2010-07-27 11:55:10 |
Martin Rotter |
removed subscriber Martin Rotter |
|
|
|
| 2010-09-16 20:00:51 |
Bug Watch Updater |
network-manager: status |
Unknown |
Fix Released |
|
| 2010-09-16 20:00:51 |
Bug Watch Updater |
network-manager: importance |
Unknown |
Medium |
|
| 2010-09-17 07:33:25 |
papukaija |
tags |
|
fixed-upstream |
|
| 2010-09-17 07:33:41 |
papukaija |
nominated for series |
|
Ubuntu Maverick |
|
| 2010-09-17 07:34:10 |
papukaija |
removed subscriber papukaija |
|
|
|
| 2010-09-17 07:35:02 |
papukaija |
summary |
ZTE MF628 HSDPA USB modem not recognized by network-manager 0.7 |
ZTE MF628 HSDPA USB modem not recognized by network-manager |
|
| 2012-02-22 17:56:56 |
Mathieu Trudel-Lapierre |
network-manager (Ubuntu): status |
Confirmed |
Fix Released |
|
| 2012-03-02 08:51:09 |
RussianNeuroMancer |
network-manager (Baltix): status |
New |
Fix Released |
|
