[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-49-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #83-Ubuntu SMP Fri Apr 10 20:14:51 UTC 2015 (Ubuntu 3.13.0-49.83-generic 3.13.11-ckt17) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007bfeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007bff0000-0x000000007bff2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007bff3000-0x000000007bffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: /P4M800Pro-8237, BIOS F4 08/31/2005 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7bff0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-F7FFF write-through [ 0.000000] F8000-F8FFF uncachable [ 0.000000] F9000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07C000000 mask FFC000000 uncachable [ 0.000000] 2 base 0D0000000 mask FF8000000 write-combining [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f5280-0x000f528f] mapped at [c00f5280] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] [ 0.000000] [mem 0x34000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01b99000, 0x01b99fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35c18000-0x36e03fff] [ 0.000000] ACPI: RSDP 000f6bd0 000014 (v00 P4M80P) [ 0.000000] ACPI: RSDT 7bff3040 00002C (v01 P4M80P AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: FACP 7bff30c0 000074 (v01 P4M80P AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: DSDT 7bff3180 003512 (v01 P4M80P AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 7bff0000 000040 [ 0.000000] ACPI: APIC 7bff6700 000084 (v01 P4M80P AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1091MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] BRK [0x01b9a000, 0x01b9afff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x7bfeffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x7bfeffff] [ 0.000000] On node 0 totalpages: 507788 [ 0.000000] free_area_init_node: node 0, pgdat c199f740, node_mem_map f4c98020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2184 pages used for memmap [ 0.000000] HighMem zone: 279538 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x7c000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bba000 s36160 r0 d21184 u57344 [ 0.000000] pcpu-alloc: s36160 r0 d21184 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 506004 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-49-generic root=UUID=d412f0a0-7a8a-4935-8a51-e719a8e8cfc8 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4063096 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007bff0) [ 0.000000] Memory: 1979932K/2031152K available (6551K kernel code, 641K rwdata, 2768K rodata, 880K init, 924K bss, 51220K reserved, 1118152K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc19bd000 - 0xc1a99000 ( 880 kB) [ 0.000000] .data : 0xc1665f74 - 0xc19bc5c0 (3417 kB) [ 0.000000] .text : 0xc1000000 - 0xc1665f74 (6551 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2808.586 MHz processor [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5617.17 BogoMIPS (lpj=11234344) [ 0.008012] pid_max: default: 32768 minimum: 301 [ 0.008076] Security Framework initialized [ 0.008128] AppArmor: AppArmor initialized [ 0.008132] Yama: becoming mindful. [ 0.008234] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.008240] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.008706] Initializing cgroup subsys memory [ 0.008725] Initializing cgroup subsys devices [ 0.008729] Initializing cgroup subsys freezer [ 0.008734] Initializing cgroup subsys blkio [ 0.008738] Initializing cgroup subsys perf_event [ 0.008742] Initializing cgroup subsys hugetlb [ 0.008798] CPU: Physical Processor ID: 0 [ 0.008801] CPU: Processor Core ID: 0 [ 0.008807] mce: CPU supports 4 MCE banks [ 0.008824] CPU0: Thermal monitoring enabled (TM1) [ 0.008856] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128 [ 0.008856] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64 [ 0.008856] tlb_flushall_shift: 6 [ 0.009415] Freeing SMP alternatives memory: 32K (c1a99000 - c1aa1000) [ 0.012837] ACPI: Core revision 20131115 [ 0.015382] ACPI: All ACPI Tables successfully acquired [ 0.018458] ftrace: allocating 27857 entries in 55 pages [ 0.032278] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.033645] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.074710] smpboot: CPU0: Intel(R) Pentium(R) D CPU 2.80GHz (fam: 0f, model: 04, stepping: 07) [ 0.076000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.076000] ... version: 0 [ 0.076000] ... bit width: 40 [ 0.076000] ... generic registers: 18 [ 0.076000] ... value mask: 000000ffffffffff [ 0.076000] ... max period: 0000007fffffffff [ 0.076000] ... fixed-purpose events: 0 [ 0.076000] ... event mask: 000000000003ffff [ 0.076000] CPU 1 irqstacks, hard=f7100000 soft=f7102000 [ 0.076000] x86: Booting SMP configuration: [ 0.012000] Initializing CPU#1 [ 0.086684] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.076000] .... node #0, CPUs: #1 [ 0.088067] x86: Booted up 1 node, 2 CPUs [ 0.088073] smpboot: Total of 2 processors activated (11234.34 BogoMIPS) [ 0.089587] devtmpfs: initialized [ 0.089587] EVM: security.selinux [ 0.089587] EVM: security.SMACK64 [ 0.089587] EVM: security.ima [ 0.089587] EVM: security.capability [ 0.089587] PM: Registering ACPI NVS region [mem 0x7bff0000-0x7bff2fff] (12288 bytes) [ 0.092819] pinctrl core: initialized pinctrl subsystem [ 0.092967] regulator-dummy: no parameters [ 0.093024] RTC time: 12:39:21, date: 05/05/15 [ 0.093096] NET: Registered protocol family 16 [ 0.093368] EISA bus registered [ 0.093373] cpuidle: using governor ladder [ 0.093376] cpuidle: using governor menu [ 0.093498] ACPI: bus type PCI registered [ 0.093505] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.101646] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.101653] PCI: PCI BIOS revision 2.10 entry at 0xfb110, last bus=1 [ 0.101655] PCI: Using configuration type 1 for base access [ 0.101836] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.101840] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.101842] mtrr: probably your BIOS does not setup all CPUs. [ 0.101844] mtrr: corrected configuration. [ 0.103603] bio: create slab at 0 [ 0.104130] ACPI: Added _OSI(Module Device) [ 0.104135] ACPI: Added _OSI(Processor Device) [ 0.104138] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.104142] ACPI: Added _OSI(Processor Aggregator Device) [ 0.109575] ACPI: Interpreter enabled [ 0.109596] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.109606] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580) [ 0.109626] ACPI: (supports S0 S1 S4 S5) [ 0.109630] ACPI: Using IOAPIC for interrupt routing [ 0.109675] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.109812] ACPI: No dock devices found. [ 0.116989] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.117000] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.117011] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.117138] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.117144] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.117148] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.117152] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.117157] acpi PNP0A03:00: host bridge window [mem 0x7c000000-0xfebfffff] (ignored) [ 0.117161] PCI: root bus 00: using default resources [ 0.117166] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.117440] PCI host bridge to bus 0000:00 [ 0.117448] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.117452] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.117457] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.117482] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000 [ 0.117499] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref] [ 0.117709] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000 [ 0.117882] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000 [ 0.118051] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000 [ 0.118224] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000 [ 0.118398] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000 [ 0.118576] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400 [ 0.118645] pci 0000:00:01.0: supports D1 [ 0.118786] pci 0000:00:09.0: [1102:0007] type 00 class 0x040100 [ 0.118811] pci 0000:00:09.0: reg 0x10: [io 0x9000-0x901f] [ 0.118905] pci 0000:00:09.0: supports D1 D2 [ 0.119039] pci 0000:00:0a.0: [1033:0035] type 00 class 0x0c0310 [ 0.119063] pci 0000:00:0a.0: reg 0x10: [mem 0xde000000-0xde000fff] [ 0.119156] pci 0000:00:0a.0: supports D1 D2 [ 0.119161] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot [ 0.119302] pci 0000:00:0a.1: [1033:0035] type 00 class 0x0c0310 [ 0.119326] pci 0000:00:0a.1: reg 0x10: [mem 0xde001000-0xde001fff] [ 0.119419] pci 0000:00:0a.1: supports D1 D2 [ 0.119424] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot [ 0.119574] pci 0000:00:0a.2: [1033:00e0] type 00 class 0x0c0320 [ 0.119598] pci 0000:00:0a.2: reg 0x10: [mem 0xde002000-0xde0020ff] [ 0.119690] pci 0000:00:0a.2: supports D1 D2 [ 0.119694] pci 0000:00:0a.2: PME# supported from D0 D1 D2 D3hot [ 0.119851] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400 [ 0.119876] pci 0000:00:0f.0: reg 0x10: [io 0x9400-0x9407] [ 0.119890] pci 0000:00:0f.0: reg 0x14: [io 0x9800-0x9803] [ 0.119904] pci 0000:00:0f.0: reg 0x18: [io 0x9c00-0x9c07] [ 0.119918] pci 0000:00:0f.0: reg 0x1c: [io 0xa000-0xa003] [ 0.119931] pci 0000:00:0f.0: reg 0x20: [io 0xa400-0xa40f] [ 0.119945] pci 0000:00:0f.0: reg 0x24: [io 0xa800-0xa8ff] [ 0.120129] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a [ 0.120193] pci 0000:00:0f.1: reg 0x20: [io 0xac00-0xac0f] [ 0.120390] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300 [ 0.120451] pci 0000:00:10.0: reg 0x20: [io 0xb000-0xb01f] [ 0.120507] pci 0000:00:10.0: supports D1 D2 [ 0.120512] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.120607] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.120667] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300 [ 0.120728] pci 0000:00:10.1: reg 0x20: [io 0xb400-0xb41f] [ 0.120784] pci 0000:00:10.1: supports D1 D2 [ 0.120789] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.120882] pci 0000:00:10.1: System wakeup disabled by ACPI [ 0.120945] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300 [ 0.121006] pci 0000:00:10.2: reg 0x20: [io 0xb800-0xb81f] [ 0.121063] pci 0000:00:10.2: supports D1 D2 [ 0.121067] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.121160] pci 0000:00:10.2: System wakeup disabled by ACPI [ 0.121223] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300 [ 0.121284] pci 0000:00:10.3: reg 0x20: [io 0xbc00-0xbc1f] [ 0.121340] pci 0000:00:10.3: supports D1 D2 [ 0.121344] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.121441] pci 0000:00:10.3: System wakeup disabled by ACPI [ 0.121500] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320 [ 0.121524] pci 0000:00:10.4: reg 0x10: [mem 0xde003000-0xde0030ff] [ 0.121618] pci 0000:00:10.4: supports D1 D2 [ 0.121623] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.121772] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100 [ 0.121856] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.122028] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100 [ 0.122052] pci 0000:00:11.5: reg 0x10: [io 0xc000-0xc0ff] [ 0.122150] pci 0000:00:11.5: supports D1 D2 [ 0.122295] pci 0000:00:13.0: [10ec:8139] type 00 class 0x020000 [ 0.122319] pci 0000:00:13.0: reg 0x10: [io 0xc400-0xc4ff] [ 0.122333] pci 0000:00:13.0: reg 0x14: [mem 0xde004000-0xde0040ff] [ 0.122419] pci 0000:00:13.0: supports D1 D2 [ 0.122423] pci 0000:00:13.0: PME# supported from D1 D2 D3hot D3cold [ 0.122635] pci 0000:01:00.0: [1106:3344] type 00 class 0x030000 [ 0.122659] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdbffffff pref] [ 0.122671] pci 0000:01:00.0: reg 0x14: [mem 0xdc000000-0xdcffffff] [ 0.122714] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.122755] pci 0000:01:00.0: supports D1 D2 [ 0.122845] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.122855] pci 0000:00:01.0: bridge window [mem 0xdc000000-0xddffffff] [ 0.122861] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff pref] [ 0.122874] pci_bus 0000:00: on NUMA node 0 [ 0.123118] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 0.123311] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5 [ 0.123512] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12) [ 0.123709] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12) [ 0.123861] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.124009] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.124154] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.124298] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.124524] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0 [ 0.124745] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0 [ 0.124996] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0 [ 0.125222] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0 [ 0.126105] ACPI: \_SB_.PCI0: notify handler is installed [ 0.126149] Found 1 acpi root devices [ 0.126309] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.126309] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.126309] vgaarb: loaded [ 0.126309] vgaarb: bridge control possible 0000:01:00.0 [ 0.126309] SCSI subsystem initialized [ 0.126309] libata version 3.00 loaded. [ 0.126309] ACPI: bus type USB registered [ 0.126309] usbcore: registered new interface driver usbfs [ 0.126309] usbcore: registered new interface driver hub [ 0.126309] usbcore: registered new device driver usb [ 0.126309] PCI: Using ACPI for IRQ routing [ 0.126309] PCI: pci_cache_line_size set to 64 bytes [ 0.126309] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.126309] e820: reserve RAM buffer [mem 0x7bff0000-0x7bffffff] [ 0.126309] NetLabel: Initializing [ 0.126309] NetLabel: domain hash size = 128 [ 0.126309] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.126309] NetLabel: unlabeled traffic allowed by default [ 0.126309] Switched to clocksource refined-jiffies [ 0.144032] AppArmor: AppArmor Filesystem Enabled [ 0.144114] pnp: PnP ACPI init [ 0.144156] ACPI: bus type PNP registered [ 0.144629] system 00:00: [mem 0x000c8000-0x000cffff] has been reserved [ 0.144636] system 00:00: [mem 0x000d4400-0x000d7fff] has been reserved [ 0.144641] system 00:00: [mem 0x000f0000-0x000fbfff] could not be reserved [ 0.144645] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.144650] system 00:00: [mem 0x7bff0000-0x7bffffff] could not be reserved [ 0.144655] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved [ 0.144659] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.144664] system 00:00: [mem 0x00100000-0x7bfeffff] could not be reserved [ 0.144669] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.144673] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.144678] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.144686] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.144799] system 00:01: [io 0x4000-0x407f] has been reserved [ 0.144805] system 00:01: [io 0x40f0-0x40ff] has been reserved [ 0.144810] system 00:01: [io 0x0500-0x050f] has been reserved [ 0.144815] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.145310] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.145315] system 00:02: [io 0x0880-0x088f] has been reserved [ 0.145321] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.145352] pnp 00:03: [dma 4] [ 0.145393] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.145482] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.145549] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.145609] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.145791] pnp 00:07: [dma 2] [ 0.145856] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.146184] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.146517] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.147033] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.147246] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.147338] pnp: PnP ACPI: found 12 devices [ 0.147342] ACPI: bus type PNP unregistered [ 0.147350] PnPBIOS: Disabled by ACPI PNP [ 0.185658] Switched to clocksource acpi_pm [ 0.185700] pci 0000:01:00.0: BAR 6: assigned [mem 0xdd000000-0xdd00ffff pref] [ 0.185708] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.185718] pci 0000:00:01.0: bridge window [mem 0xdc000000-0xddffffff] [ 0.185724] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff pref] [ 0.185735] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.185739] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.185743] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xddffffff] [ 0.185747] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdbffffff pref] [ 0.185823] NET: Registered protocol family 2 [ 0.186274] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.186319] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.186401] TCP: Hash tables configured (established 8192 bind 8192) [ 0.186499] TCP: reno registered [ 0.186507] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.186529] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.186654] NET: Registered protocol family 1 [ 0.186695] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.186695] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 [ 0.186695] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 0.188129] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message [ 0.188147] pci 0000:01:00.0: Video device with shadowed ROM [ 0.188152] PCI: CLS 32 bytes, default 64 [ 0.188278] Trying to unpack rootfs image as initramfs... [ 0.800756] Freeing initrd memory: 18352K (f5c18000 - f6e04000) [ 0.801298] microcode: CPU0 sig=0xf47, pf=0x10, revision=0x3 [ 0.801315] microcode: CPU1 sig=0xf47, pf=0x10, revision=0x3 [ 0.801385] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.801389] Scanning for low memory corruption every 60 seconds [ 0.801795] Initialise system trusted keyring [ 0.801877] audit: initializing netlink socket (disabled) [ 0.801907] type=2000 audit(1430829560.799:1): initialized [ 0.834570] bounce pool size: 64 pages [ 0.834594] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.837076] zbud: loaded [ 0.837231] VFS: Disk quotas dquot_6.5.2 [ 0.837310] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.838146] fuse init (API version 7.22) [ 0.838291] msgmni has been set to 1719 [ 0.838399] Key type big_key registered [ 0.839225] Key type asymmetric registered [ 0.839230] Asymmetric key parser 'x509' registered [ 0.839293] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.839371] io scheduler noop registered [ 0.839375] io scheduler deadline registered (default) [ 0.839425] io scheduler cfq registered [ 0.839672] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.839701] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.839793] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 0.839796] vesafb: scrolling: redraw [ 0.839800] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.840363] vesafb: framebuffer at 0xd8000000, mapped to 0xf8480000, using 5120k, total 5120k [ 0.939764] Console: switching to colour frame buffer device 160x64 [ 1.038994] fb0: VESA VGA frame buffer device [ 1.039044] ipmi message handler version 39.2 [ 1.039166] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.039177] ACPI: Power Button [PWRB] [ 1.039267] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.039273] ACPI: Power Button [PWRF] [ 1.039471] GHES: HEST is not enabled! [ 1.039714] isapnp: Scanning for PnP cards... [ 1.039722] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.060221] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.080655] 00:09: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.082701] Linux agpgart interface v0.103 [ 1.082831] agpgart: Detected VIA VT3314 chipset [ 1.091115] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [ 1.093523] brd: module loaded [ 1.094706] loop: module loaded [ 1.095523] libphy: Fixed MDIO Bus: probed [ 1.095721] tun: Universal TUN/TAP device driver, 1.6 [ 1.095724] tun: (C) 1999-2004 Max Krasnyansky [ 1.095790] PPP generic driver version 2.4.2 [ 1.095859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.095867] ehci-pci: EHCI PCI platform driver [ 1.096219] ehci-pci 0000:00:0a.2: EHCI Host Controller [ 1.096231] ehci-pci 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 1.096337] ehci-pci 0000:00:0a.2: irq 16, io mem 0xde002000 [ 1.108029] ehci-pci 0000:00:0a.2: USB 2.0 started, EHCI 1.00 [ 1.108138] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.108143] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.108147] usb usb1: Product: EHCI Host Controller [ 1.108151] usb usb1: Manufacturer: Linux 3.13.0-49-generic ehci_hcd [ 1.108154] usb usb1: SerialNumber: 0000:00:0a.2 [ 1.108336] hub 1-0:1.0: USB hub found [ 1.108351] hub 1-0:1.0: 5 ports detected [ 1.108812] ehci-pci 0000:00:10.4: EHCI Host Controller [ 1.108823] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 2 [ 1.108906] ehci-pci 0000:00:10.4: irq 21, io mem 0xde003000 [ 1.120028] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 1.120103] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.120108] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.120112] usb usb2: Product: EHCI Host Controller [ 1.120115] usb usb2: Manufacturer: Linux 3.13.0-49-generic ehci_hcd [ 1.120119] usb usb2: SerialNumber: 0000:00:10.4 [ 1.120273] hub 2-0:1.0: USB hub found [ 1.120286] hub 2-0:1.0: 8 ports detected [ 1.120621] ehci-platform: EHCI generic platform driver [ 1.120646] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.120649] ohci-pci: OHCI PCI platform driver [ 1.120867] ohci-pci 0000:00:0a.0: OHCI PCI host controller [ 1.120877] ohci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 3 [ 1.120930] ohci-pci 0000:00:0a.0: irq 18, io mem 0xde000000 [ 1.205858] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.205863] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.205867] usb usb3: Product: OHCI PCI host controller [ 1.205871] usb usb3: Manufacturer: Linux 3.13.0-49-generic ohci_hcd [ 1.205874] usb usb3: SerialNumber: 0000:00:0a.0 [ 1.206028] hub 3-0:1.0: USB hub found [ 1.206042] hub 3-0:1.0: 3 ports detected [ 1.206417] ohci-pci 0000:00:0a.1: OHCI PCI host controller [ 1.206428] ohci-pci 0000:00:0a.1: new USB bus registered, assigned bus number 4 [ 1.206478] ohci-pci 0000:00:0a.1: irq 19, io mem 0xde001000 [ 1.289870] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.289875] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.289878] usb usb4: Product: OHCI PCI host controller [ 1.289882] usb usb4: Manufacturer: Linux 3.13.0-49-generic ohci_hcd [ 1.289885] usb usb4: SerialNumber: 0000:00:0a.1 [ 1.290038] hub 4-0:1.0: USB hub found [ 1.290052] hub 4-0:1.0: 2 ports detected [ 1.290203] ohci-platform: OHCI generic platform driver [ 1.290221] uhci_hcd: USB Universal Host Controller Interface driver [ 1.290456] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 1.290465] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 1.290494] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b000 [ 1.290584] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.290589] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.290593] usb usb5: Product: UHCI Host Controller [ 1.290596] usb usb5: Manufacturer: Linux 3.13.0-49-generic uhci_hcd [ 1.290599] usb usb5: SerialNumber: 0000:00:10.0 [ 1.290755] hub 5-0:1.0: USB hub found [ 1.290768] hub 5-0:1.0: 2 ports detected [ 1.291099] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 1.291109] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6 [ 1.291135] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b400 [ 1.291225] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.291230] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.291234] usb usb6: Product: UHCI Host Controller [ 1.291237] usb usb6: Manufacturer: Linux 3.13.0-49-generic uhci_hcd [ 1.291240] usb usb6: SerialNumber: 0000:00:10.1 [ 1.291393] hub 6-0:1.0: USB hub found [ 1.291406] hub 6-0:1.0: 2 ports detected [ 1.291744] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 1.291754] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 7 [ 1.291806] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b800 [ 1.291890] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.291894] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.291898] usb usb7: Product: UHCI Host Controller [ 1.291901] usb usb7: Manufacturer: Linux 3.13.0-49-generic uhci_hcd [ 1.291905] usb usb7: SerialNumber: 0000:00:10.2 [ 1.292077] hub 7-0:1.0: USB hub found [ 1.292094] hub 7-0:1.0: 2 ports detected [ 1.292429] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 1.292439] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 8 [ 1.292465] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000bc00 [ 1.292551] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.292555] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.292559] usb usb8: Product: UHCI Host Controller [ 1.292562] usb usb8: Manufacturer: Linux 3.13.0-49-generic uhci_hcd [ 1.292566] usb usb8: SerialNumber: 0000:00:10.3 [ 1.292738] hub 8-0:1.0: USB hub found [ 1.292750] hub 8-0:1.0: 2 ports detected [ 1.293016] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 [ 1.293020] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 1.293561] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.293573] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.293764] mousedev: PS/2 mouse device common for all mice [ 1.293957] rtc_cmos 00:04: RTC can wake from S4 [ 1.294155] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.294211] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram [ 1.294348] device-mapper: uevent: version 1.0.3 [ 1.294464] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.294500] platform eisa.0: Probing EISA bus 0 [ 1.294526] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.294550] platform eisa.0: EISA: Detected 0 cards [ 1.294564] cpufreq-nforce2: No nForce2 chipset. [ 1.294572] ledtrig-cpu: registered to indicate activity on CPUs [ 1.294802] TCP: cubic registered [ 1.294982] NET: Registered protocol family 10 [ 1.295336] NET: Registered protocol family 17 [ 1.295359] Key type dns_resolver registered [ 1.295641] Using IPI No-Shortcut mode [ 1.295769] Loading compiled-in X.509 certificates [ 1.300665] Loaded X.509 cert 'Magrathea: Glacier signing key: 84c09e2e78ff91ba4296f5f5425fbdbb4ab05abe' [ 1.300691] registered taskstats version 1 [ 1.305269] Key type trusted registered [ 1.312662] Key type encrypted registered [ 1.312674] AppArmor: AppArmor sha1 policy hashing enabled [ 1.312679] IMA: No TPM chip found, activating TPM-bypass! [ 1.313066] regulator-dummy: disabling [ 1.313156] Magic number: 15:771:682 [ 1.313332] rtc_cmos 00:04: setting system clock to 2015-05-05 12:39:22 UTC (1430829562) [ 1.313452] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.313455] EDD information not available. [ 1.313510] PM: Hibernation image not present or could not be loaded. [ 1.350853] isapnp: No Plug & Play device found [ 1.352265] Freeing unused kernel memory: 880K (c19bd000 - c1a99000) [ 1.352347] Write protecting the kernel text: 6552k [ 1.352505] Write protecting the kernel read-only data: 2776k [ 1.352508] NX-protecting the kernel data: 5736k [ 1.377063] systemd-udevd[95]: starting version 204 [ 1.422536] usb 1-4: new high-speed USB device number 2 using ehci-pci [ 1.430324] Floppy drive(s): fd0 is 1.44M [ 1.449869] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.449919] 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.457138] pata_via 0000:00:0f.1: version 0.3.4 [ 1.457655] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [ 1.457659] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 1.459856] FDC 0 is a post-1991 82077 [ 1.464614] scsi0 : pata_via [ 1.468095] scsi1 : pata_via [ 1.468212] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xac00 irq 14 [ 1.468218] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xac08 irq 15 [ 1.468555] sata_via 0000:00:0f.0: version 2.6 [ 1.468883] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 1.476118] scsi2 : sata_via [ 1.477527] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.477589] scsi3 : sata_via [ 1.477693] ata3: SATA max UDMA/133 cmd 0x9400 ctl 0x9800 bmdma 0xa400 irq 20 [ 1.477698] ata4: SATA max UDMA/133 cmd 0x9c00 ctl 0xa000 bmdma 0xa408 irq 20 [ 1.480508] 8139too 0000:00:13.0 eth0: RealTek RTL8139 at 0x0001c400, 00:14:85:b5:24:01, IRQ 18 [ 1.553908] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608 [ 1.553917] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.553921] usb 1-4: Product: USB2.0 Hub [ 1.554464] hub 1-4:1.0: USB hub found [ 1.554777] hub 1-4:1.0: 4 ports detected [ 1.680033] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.688695] ata1.00: HPA detected: current 488395055, native 488397168 [ 1.688703] ata1.00: ATA-7: ST3250824A, 3.AAH, max UDMA/100 [ 1.688707] ata1.00: 488395055 sectors, multi 16: LBA48 [ 1.688716] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A300, max UDMA/33 [ 1.688724] ata1.00: limited to UDMA/33 due to 40-wire cable [ 1.724039] usb 2-7: new high-speed USB device number 3 using ehci-pci [ 1.771925] ata1.00: configured for UDMA/33 [ 1.788247] ata1.01: configured for UDMA/33 [ 1.791013] scsi 0:0:0:0: Direct-Access ATA ST3250824A 3.AA PQ: 0 ANSI: 5 [ 1.791428] sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB) [ 1.791480] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.791539] sd 0:0:0:0: [sda] Write Protect is off [ 1.791545] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.791593] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.796799] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4040B A300 PQ: 0 ANSI: 5 [ 1.804893] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.804899] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.805112] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.805221] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.823516] sda: sda1 [ 1.823992] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.832026] tsc: Refined TSC clocksource calibration: 2808.514 MHz [ 1.856912] usb 2-7: New USB device found, idVendor=03f0, idProduct=032a [ 1.856917] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.856922] usb 2-7: Product: HP LaserJet Professional P1102w [ 1.856925] usb 2-7: Manufacturer: Hewlett-Packard [ 1.856929] usb 2-7: SerialNumber: 000000000Q91TN7RPR1a [ 1.862265] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 1.877473] ata3.00: ATA-7: MAXTOR STM3250820AS, 3.AAE, max UDMA/133 [ 1.877481] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.944121] ata3.00: configured for UDMA/133 [ 1.971613] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5 [ 1.971925] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.972042] sd 2:0:0:0: [sdb] Write Protect is off [ 1.972048] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.972090] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.972207] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.024254] sdb: sdb1 sdb3 < sdb5 sdb6 sdb7 > [ 2.025003] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.152028] usb 5-2: new low-speed USB device number 2 using uhci_hcd [ 2.176025] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 2.327585] usb 5-2: New USB device found, idVendor=046d, idProduct=c05a [ 2.327597] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.327601] usb 5-2: Product: USB Optical Mouse [ 2.327605] usb 5-2: Manufacturer: Logitech [ 2.345064] hidraw: raw HID events driver (C) Jiri Kosina [ 2.370744] usbcore: registered new interface driver usbhid [ 2.370750] usbhid: USB HID core driver [ 2.377973] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb5/5-2/5-2:1.0/input/input5 [ 2.378762] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-2/input0 [ 2.568064] usb 8-2: new low-speed USB device number 2 using uhci_hcd [ 2.637650] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 2.747543] usb 8-2: New USB device found, idVendor=046d, idProduct=c313 [ 2.747551] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.747555] usb 8-2: Product: USB Multimedia Keyboard [ 2.747559] usb 8-2: Manufacturer: BTC [ 2.767136] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:10.3/usb8/8-2/8-2:1.0/input/input6 [ 2.768317] hid-generic 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:10.3-2/input0 [ 2.810661] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:10.3/usb8/8-2/8-2:1.1/input/input7 [ 2.810940] hid-generic 0003:046D:C313.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:10.3-2/input1 [ 2.818935] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 2.832210] Switched to clocksource tsc [ 3.056208] random: nonblocking pool is initialized [ 3.137170] usb 1-4.4: new high-speed USB device number 3 using ehci-pci [ 3.229676] usb 1-4.4: New USB device found, idVendor=05e3, idProduct=0608 [ 3.229681] usb 1-4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.229686] usb 1-4.4: Product: USB2.0 Hub [ 3.230224] hub 1-4.4:1.0: USB hub found [ 3.230547] hub 1-4.4:1.0: 4 ports detected [ 4.023206] init: plymouth-upstart-bridge main process (159) terminated with status 1 [ 4.023234] init: plymouth-upstart-bridge main process ended, respawning [ 4.031967] init: plymouth-upstart-bridge main process (171) terminated with status 1 [ 4.032085] init: plymouth-upstart-bridge main process ended, respawning [ 4.036488] init: plymouth-upstart-bridge main process (173) terminated with status 1 [ 4.036514] init: plymouth-upstart-bridge main process ended, respawning [ 4.043998] init: plymouth-upstart-bridge main process (174) terminated with status 1 [ 4.044089] init: plymouth-upstart-bridge main process ended, respawning [ 4.055223] init: plymouth-upstart-bridge main process (176) terminated with status 1 [ 4.055279] init: plymouth-upstart-bridge main process ended, respawning [ 4.063258] init: plymouth-upstart-bridge main process (179) terminated with status 1 [ 4.063287] init: plymouth-upstart-bridge main process ended, respawning [ 4.067485] init: plymouth-upstart-bridge main process (181) terminated with status 1 [ 4.067512] init: plymouth-upstart-bridge main process ended, respawning [ 4.075975] init: plymouth-upstart-bridge main process (182) terminated with status 1 [ 4.076109] init: plymouth-upstart-bridge main process ended, respawning [ 22.763045] Adding 975868k swap on /dev/sdb5. Priority:-1 extents:1 across:975868k FS [ 22.829403] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.075345] systemd-udevd[303]: starting version 204 [ 23.101446] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro [ 23.272242] lp: driver loaded but no devices found [ 23.307883] ppdev: user-space parallel port driver [ 23.322975] parport_pc 00:0a: reported by Plug and Play ACPI [ 23.323059] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 23.345723] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.420450] lp0: using parport0 (interrupt-driven). [ 23.945053] WARNING! power/level is deprecated; use power/control instead [ 23.998853] usblp 2-7:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x032A [ 23.998967] usbcore: registered new interface driver usblp [ 24.220438] Bluetooth: Core ver 2.17 [ 24.220540] NET: Registered protocol family 31 [ 24.220544] Bluetooth: HCI device and connection manager initialized [ 24.220576] Bluetooth: HCI socket layer initialized [ 24.220583] Bluetooth: L2CAP socket layer initialized [ 24.220596] Bluetooth: SCO socket layer initialized [ 24.373496] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.373504] Bluetooth: BNEP filters: protocol multicast [ 24.373521] Bluetooth: BNEP socket layer initialized [ 24.401511] Bluetooth: RFCOMM TTY layer initialized [ 24.401592] Bluetooth: RFCOMM socket layer initialized [ 24.401610] Bluetooth: RFCOMM ver 1.11 [ 24.427192] type=1400 audit(1430822385.608:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=506 comm="apparmor_parser" [ 24.427211] type=1400 audit(1430822385.608:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=506 comm="apparmor_parser" [ 24.427223] type=1400 audit(1430822385.608:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=506 comm="apparmor_parser" [ 24.432342] type=1400 audit(1430822385.616:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=506 comm="apparmor_parser" [ 24.432367] type=1400 audit(1430822385.616:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=506 comm="apparmor_parser" [ 24.437771] type=1400 audit(1430822385.620:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=506 comm="apparmor_parser" [ 24.462195] type=1400 audit(1430822385.644:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=511 comm="apparmor_parser" [ 24.652468] type=1400 audit(1430822385.836:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=532 comm="apparmor_parser" [ 24.652485] type=1400 audit(1430822385.836:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=532 comm="apparmor_parser" [ 24.663803] type=1400 audit(1430822385.844:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=532 comm="apparmor_parser" [ 24.945553] snd-ca0106: Model 1012 Rev 00000000 Serial 10121102 [ 25.014366] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 25.014377] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 25.055917] init: cups main process (538) killed by HUP signal [ 25.055947] init: cups main process ended, respawning [ 25.614813] init: failsafe main process (583) killed by TERM signal [ 27.152189] 8139too 0000:00:13.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 27.365843] init: samba-ad-dc main process (793) terminated with status 1 [ 30.733154] init: plymouth-upstart-bridge main process ended, respawning [ 30.781212] init: plymouth-upstart-bridge main process (1692) terminated with status 1 [ 30.781252] init: plymouth-upstart-bridge main process ended, respawning [ 54.910154] audit_printk_skb: 105 callbacks suppressed [ 54.910163] type=1400 audit(1430822416.092:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2103 comm="apparmor_parser" [ 54.910182] type=1400 audit(1430822416.092:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2103 comm="apparmor_parser" [ 54.910971] type=1400 audit(1430822416.092:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2103 comm="apparmor_parser" [ 514.874612] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 514.946407] JFS: nTxBlock = 8192, nTxLock = 65536 [ 515.014943] NTFS driver 2.1.30 [Flags: R/O MODULE]. [ 515.126806] QNX4 filesystem 0.2.3 registered. [ 515.178006] xor: measuring software checksum speed [ 515.216015] pIII_sse : 3929.000 MB/sec [ 515.256011] prefetch64-sse: 3975.000 MB/sec [ 515.256016] xor: using function: prefetch64-sse (3975.000 MB/sec) [ 515.352035] raid6: mmxx1 1703 MB/s [ 515.420048] raid6: mmxx2 1990 MB/s [ 515.488074] raid6: sse1x1 984 MB/s [ 515.556045] raid6: sse1x2 1953 MB/s [ 515.624029] raid6: sse2x1 2032 MB/s [ 515.692031] raid6: sse2x2 2894 MB/s [ 515.692034] raid6: using algorithm sse2x2 (2894 MB/s) [ 515.692038] raid6: using intx1 recovery algorithm [ 515.804681] bio: create slab at 1 [ 515.819664] Btrfs loaded [ 539.114380] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1) [ 539.116852] CPU1: Core temperature/speed normal [ 599.988080] mce: [Hardware Error]: Machine check events logged [ 714.995274] perf samples too long (2539 > 2500), lowering kernel.perf_event_max_sample_rate to 50000