X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux MiniLin 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=100e3c67-ae26-4014-92a6-456e0e99d07e ro quiet splash
Build Date: 26 October 2009  05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb  5 21:01:10 2010
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1039:6300:1043:1672 Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter rev 49, Mem @ 0xd8000000/134217728, 0xd2800000/131072, I/O @ 0x0000a800/128
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default sis Device 0"
		Driver	"sis"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default sis Screen 0"
		Device	"Builtin Default sis Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default sis Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default sis Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default sis Device 0"
(==) No monitor specified for screen "Builtin Default sis Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.10.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.2.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.4.0
	ABI class: X.Org Video Driver, version 5.0
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
	SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
	SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
	SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
	SIS340
(II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
	Volari V3XT/V5/V8/Duo (XG40)
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for sis
(--) Assigning device section with no busID to primary device
(--) Chipset SIS630/730 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 0.0.2
	ABI class: X.Org Video Driver, version 5.0
(EE) open /dev/fb0: No such file or directory
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.6.0.0)
(II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
(II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
(II) SIS(0): *** for documentation and updates.
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated I/O registers at 0xA800
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) SIS(0): Creating default Display subsection in Screen section
	"Builtin Default sis Screen 0" for depth/fbbpp 24/32
(==) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(WW) SIS(0): Could not find/read video BIOS
(==) SIS(0): Using XAA acceleration architecture
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is disabled
(==) SIS(0): TurboQueue enabled
(==) SIS(0): Hotkey display switching is disabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
(II) SIS(0):          whether enabled or disabled. This is no driver bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(II) SIS(0): For information on SiSCtrl, see
		http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
(==) SIS(0): DRI enabled
(II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
(II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
(--) SIS(0): Shared Memory Area is on DIMM0
(--) SIS(0): DRAM type: SDR SDRAM
(--) SIS(0): Memory clock: 133.634 MHz
(--) SIS(0): (Adapter assumes MCLK being 133 Mhz)
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xD8000000
(--) SIS(0): MMIO registers at 0xD2800000 (size 64K)
(--) SIS(0): VideoRAM: 16384 KB
(II) SIS(0): Using 8192K of framebuffer memory at offset 0K
(--) SIS(0): Hardware supports two video overlays
(--) SIS(0): Detected LVDS transmitter (External chip ID 4)
(II) SIS(0): Detected Chrontel TV encoder in promiscuous state (DDC/I2C mix-up)
(--) SIS(0): CRT1/VGA detected
(--) SIS(0): Detected LCD/plasma panel (1024x600, 11, non-exp., RGB18 [b6e9ff])
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SIS(0): CRT1 gamma correction is enabled
(--) SIS(0): CRT2 gamma correction not supported by hardware
(--) SIS(0): Memory bandwidth at 32 bpp is 267.268 MHz
(--) SIS(0): Bandwidth reserved for CRT2 is 67 Mhz
(--) SIS(0): Bandwidth available for CRT1 is 200.268 MHz
(--) SIS(0): Detected LCD PanelDelayCompensation 0x20
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SIS(0): CRT1 DDC probing failed
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 16384 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 630
(II) SIS(0): VESA VBE OEM Product Rev: 2.08.b6
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) SIS(0): VESA VBE DDC supported
(II) SIS(0): VESA VBE DDC Level 2
(II) SIS(0): VESA VBE DDC transfer in appr. 1 sec.
(II) SIS(0): VESA VBE DDC read successfully
(--) SIS(0): VBE CRT1 DDC monitor info:
(II) SIS(0): Manufacturer: ACI  Model: 22a2  Serial#: 3413
(II) SIS(0): Year: 2008  Week: 4
(II) SIS(0): EDID Version: 1.3
(II) SIS(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) SIS(0): Signal levels configurable
(II) SIS(0): Sync:  Separate  Composite  SyncOnGreen
(II) SIS(0): Max Image Size [cm]: horiz.: 47  vert.: 30
(II) SIS(0): Gamma: 2.20
(II) SIS(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) SIS(0): Default color space is primary color space
(II) SIS(0): First detailed timing is preferred mode
(II) SIS(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) SIS(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) SIS(0): Supported established timings:
(II) SIS(0): 720x400@70Hz
(II) SIS(0): 640x480@60Hz
(II) SIS(0): 640x480@67Hz
(II) SIS(0): 640x480@72Hz
(II) SIS(0): 640x480@75Hz
(II) SIS(0): 800x600@56Hz
(II) SIS(0): 800x600@60Hz
(II) SIS(0): 800x600@72Hz
(II) SIS(0): 800x600@75Hz
(II) SIS(0): 832x624@75Hz
(II) SIS(0): 1024x768@60Hz
(II) SIS(0): 1024x768@70Hz
(II) SIS(0): 1024x768@75Hz
(II) SIS(0): 1280x1024@75Hz
(II) SIS(0): Manufacturer's mask: 0
(II) SIS(0): Supported standard timings:
(II) SIS(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) SIS(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) SIS(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) SIS(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
(II) SIS(0): #4: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
(II) SIS(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) SIS(0): Supported detailed timing:
(II) SIS(0): clock: 146.2 MHz   Image Size:  473 x 296 mm
(II) SIS(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) SIS(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) SIS(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 170 MHz
(II) SIS(0): Monitor name: VW222
(II) SIS(0): Serial No: 81LMQC003413
(II) SIS(0): EDID (in hex):
(II) SIS(0): 	00ffffffffffff000469a222550d0000
(II) SIS(0): 	041201031e2f1e78eec4f6a3574a9c23
(II) SIS(0): 	114f54bfef00714f818081409500a940
(II) SIS(0): 	b3000101010121399030621a274068b0
(II) SIS(0): 	3600d9281100001c000000fd00384b1f
(II) SIS(0): 	5111000a202020202020000000fc0056
(II) SIS(0): 	573232320a20202020202020000000ff
(II) SIS(0): 	0038314c4d5143303033343133200065
(II) SIS(0): EDID vendor "ACI", prod id 8866
(II) SIS(0): Using EDID range info for horizontal sync
(II) SIS(0): Using EDID range info for vertical refresh
(II) SIS(0): Printing DDC gathered Modelines:
(II) SIS(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) SIS(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) SIS(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) SIS(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) SIS(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) SIS(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) SIS(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) SIS(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) SIS(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) SIS(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) SIS(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) SIS(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) SIS(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) SIS(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) SIS(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) SIS(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) SIS(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) SIS(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) SIS(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) SIS(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) SIS(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(--) SIS(0): End of VBE CRT1 DDC monitor info
(==) SIS(0): Min pixel clock is 10 MHz
(--) SIS(0): Max pixel clock is 138 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): <default monitor>: Using hsync range of 31.00-81.00 kHz
(II) SIS(0): <default monitor>: Using vrefresh range of 56.00-75.00 Hz
(II) SIS(0): <default monitor>: Using maximum pixel clock of 170.00 MHz
(WW) SIS(0): Unable to estimate virtual size
(II) SIS(0): Clock range:  10.00 to 138.96 MHz
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "720x480" (unknown reason)
(II) SIS(0): Not using default mode "720x576" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "512x384" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1280x960" (unknown reason)
(II) SIS(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1152x768" (unknown reason)
(II) SIS(0): Not using default mode "800x480" (unknown reason)
(II) SIS(0): Not using default mode "800x480" (unknown reason)
(II) SIS(0): Not using default mode "800x480" (unknown reason)
(II) SIS(0): Not using default mode "1024x576" (unknown reason)
(II) SIS(0): Not using default mode "1024x576" (unknown reason)
(II) SIS(0): Not using default mode "1024x576" (unknown reason)
(II) SIS(0): Not using default mode "1280x720" (unknown reason)
(II) SIS(0): Not using default mode "1280x720" (unknown reason)
(II) SIS(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "848x480" (unknown reason)
(II) SIS(0): Not using default mode "848x480" (unknown reason)
(II) SIS(0): Not using default mode "856x480" (unknown reason)
(II) SIS(0): Not using default mode "856x480" (unknown reason)
(II) SIS(0): Not using default mode "1360x768" (unknown reason)
(II) SIS(0): Not using default mode "1280x768" (unknown reason)
(II) SIS(0): Not using default mode "768x576" (unknown reason)
(II) SIS(0): Not using default mode "1360x1024" (unknown reason)
(--) SIS(0): Virtual size is 1024x600 (pitch 1024)
(**) SIS(0): *Default mode "1024x600": 65.1 MHz, 48.5 kHz, 60.6 Hz
(II) SIS(0): Modeline "1024x600"x60.6   65.15  1024 1048 1184 1344  600 687 694 800 -hsync -vsync (48.5 kHz)
(**) SIS(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SIS(0): Modeline "800x600"x75.0   49.52  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) SIS(0): *Default mode "800x600": 50.1 MHz, 48.2 kHz, 72.4 Hz
(II) SIS(0): Modeline "800x600"x72.4   50.11  800 856 976 1040  600 637 643 666 +hsync +vsync (48.2 kHz)
(**) SIS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SIS(0): Modeline "800x600"x60.3   39.97  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) SIS(0): *Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "800x600"x56.3   36.06  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) SIS(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SIS(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) SIS(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) SIS(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(**) SIS(0): *Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
(II) SIS(0): Modeline "640x480"x59.7   25.06  640 656 752 800  480 490 492 525 -hsync -vsync (31.3 kHz)
(**) SIS(0): *Default mode "640x400": 25.1 MHz, 31.6 kHz, 71.6 Hz
(II) SIS(0): Modeline "640x400"x71.6   25.06  640 656 752 792  400 413 415 442 -hsync +vsync (31.6 kHz)
(**) SIS(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SIS(0): Modeline "400x300"x60.3   19.98  400 416 480 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) SIS(0): *Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D)
(II) SIS(0): Modeline "320x240"x60.7   12.53  320 328 376 400  240 245 246 258 doublescan -hsync -vsync (31.3 kHz)
(**) SIS(0): *Default mode "320x200": 12.5 MHz, 31.3 kHz, 70.9 Hz (D)
(II) SIS(0): Modeline "320x200"x70.9   12.53  320 328 376 400  200 206 207 221 doublescan -hsync +vsync (31.3 kHz)
(**) SIS(0): Display dimensions: (470, 300) mm
(**) SIS(0): DPI set to (55, 50)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.2.1
	ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): 2D acceleration enabled
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 16384 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 630
(II) SIS(0): VESA VBE OEM Product Rev: 2.08.b6
(II) SIS(0): Setting standard mode 0x22
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] loaded kernel module for "sis" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) SIS(0): [drm] Using the DRM lock SAREA also for drawables.
(II) SIS(0): [drm] framebuffer handle = 0xd8000000
(II) SIS(0): [drm] added 1 reserved context for kernel
(II) SIS(0): X context handle = 0x1
(II) SIS(0): [drm] installed DRM signal handler
(II) SIS(0): [dri] Video RAM memory heap: 0x800000 to 0xf7f000 (7676KB)
(II) SIS(0): [drm] MMIO registers mapped to 0xd2800000
(II) SIS(0): [drm] AGP enabled
(II) SIS(0): [drm] Allocated 8MB AGP memory
(II) SIS(0): [drm] Bound 8MB AGP memory
(II) SIS(0): [drm] No valid IRQ number for device 1:0:0 (code -22)
(II) SIS(0): [dri] Visual configs initialized
(II) SIS(0): Framebuffer from (0,0) to (1023,2045)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Setting up tile and stipple cache:
		32 128x128 slots
		14 256x256 slots
(--) SIS(0): CPU frequency 933.00Mhz
(II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
(--) SIS(0): 	Checked libc memcpy()... 	179.2 MiB/s
(--) SIS(0): 	Checked built-in-1 memcpy()... 	235.6 MiB/s
(--) SIS(0): 	Checked built-in-2 memcpy()... 	83.1 MiB/s
(--) SIS(0): 	Checked MMX memcpy()... 	195.1 MiB/s
(--) SIS(0): 	Checked MMX2 memcpy()... 	314.0 MiB/s
(--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
(--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(II) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): [DRI] installation complete
(II) SIS(0): Direct rendering enabled
(II) SIS(0): Initialized SISCTRL extension version 0.1
(II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: Loaded and initialized /usr/lib/dri/sis_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 2.2.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Asus Laptop extra buttons
(**) Asus Laptop extra buttons: always reports core events
(**) Asus Laptop extra buttons: Device: "/dev/input/event6"
(II) Asus Laptop extra buttons: Found keys
(II) Asus Laptop extra buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event7"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) TPPS/2 IBM TrackPoint: initialized for relative axes.
(II) config/hal: Adding input device SONY SONY Mouse
(**) SONY SONY Mouse: always reports core events
(**) SONY SONY Mouse: Device: "/dev/input/event5"
(II) SONY SONY Mouse: Found 3 mouse buttons
(II) SONY SONY Mouse: Found x and y relative axes
(II) SONY SONY Mouse: Found scroll wheel(s)
(II) SONY SONY Mouse: Configuring as mouse
(**) SONY SONY Mouse: YAxisMapping: buttons 4 and 5
(**) SONY SONY Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "SONY SONY Mouse" (type: MOUSE)
(**) SONY SONY Mouse: (accel) keeping acceleration scheme 1
(**) SONY SONY Mouse: (accel) filter chain progression: 2.00
(**) SONY SONY Mouse: (accel) filter stage 0: 20.00 ms
(**) SONY SONY Mouse: (accel) set acceleration profile 0
(II) SONY SONY Mouse: initialized for relative axes.