After today's upgrades when I boot to feisty (both recovery and normal) the system hangs for about 15-25 seconds on "Configuring network interfaces." Here is the output of dmesg: ##DMESG START [ 0.000000] Linux version 2.6.20-13-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Mar 25 00:21:25 UTC 2007 (Ubuntu 2.6.20-13.21-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000030000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 0000000077da0000 end: 0000000077ea0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 0000000077ea0000 size: 000000000000c000 end: 0000000077eac000 type: 3 [ 0.000000] copy_e820_map() start: 0000000077eac000 size: 0000000000054000 end: 0000000077f00000 type: 4 [ 0.000000] copy_e820_map() start: 0000000077f00000 size: 0000000008100000 end: 0000000080000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077ea0000 (usable) [ 0.000000] BIOS-e820: 0000000077ea0000 - 0000000077eac000 (ACPI data) [ 0.000000] BIOS-e820: 0000000077eac000 - 0000000077f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077f00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 1022MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f7c50 [ 0.000000] Entering add_active_range(0, 0, 491168) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 491168 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 491168 [ 0.000000] On node 0 totalpages: 491168 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2045 pages used for memmap [ 0.000000] HighMem zone: 259747 pages, LIFO batch:31 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f7c20 [ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x77ea4577 [ 0.000000] ACPI: FADT (v001 HP Piranha 0x06040000 ATI 0x000f4240) @ 0x77eabe1a [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x77eabe8e [ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x77eabf7e [ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x77eabfc4 [ 0.000000] ACPI: DSDT (v001 HP 309B 0x06040000 MSFT 0x0100000e) @ 0x00000000 [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Detected 1994.447 MHz processor. [ 12.375751] Built 1 zonelists. Total pages: 487331 [ 12.375754] Kernel command line: root=UUID=016b6f9a-d55c-48a9-b83c-3f009a21ac5c ro splash [ 12.375880] mapped APIC to ffffd000 (fee00000) [ 12.375882] mapped IOAPIC to ffffc000 (fec00000) [ 12.375886] Enabling fast FPU save and restore... done. [ 12.375888] Enabling unmasked SIMD FPU exception support... done. [ 12.375898] Initializing CPU#0 [ 12.375963] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 12.376873] Console: colour VGA+ 80x25 [ 12.379772] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 12.380267] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 12.436657] Memory: 1936740k/1964672k available (1992k kernel code, 26644k reserved, 889k data, 328k init, 1047168k highmem) [ 12.436719] virtual kernel memory layout: [ 12.436720] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 12.436721] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 12.436723] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 12.436724] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 12.436725] .init : 0xc03d7000 - 0xc0429000 ( 328 kB) [ 12.436726] .data : 0xc02f2184 - 0xc03d06d4 ( 889 kB) [ 12.436728] .text : 0xc0100000 - 0xc02f2184 (1992 kB) [ 12.437070] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 12.515846] Calibrating delay using timer specific routine.. 3992.59 BogoMIPS (lpj=7985187) [ 12.515971] Security Framework v1.0.0 initialized [ 12.516021] SELinux: Disabled at boot. [ 12.516076] Mount-cache hash table entries: 512 [ 12.516257] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 [ 12.516265] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 12.516311] CPU: L2 Cache: 1024K (64 bytes/line) [ 12.516355] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 [ 12.516367] Compat vDSO mapped to ffffe000. [ 12.516413] Remapping vsyscall page to ffffe000 [ 12.516464] Checking 'hlt' instruction... OK. [ 12.532015] SMP alternatives: switching to UP code [ 12.532304] Freeing SMP alternatives: 11k freed [ 12.532540] Early unpacking initramfs... done [ 12.813956] ACPI: Core revision 20060707 [ 12.814206] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 13.454818] CPU0: AMD Turion(tm) 64 Mobile Technology ML-37 stepping 02 [ 13.454949] Total of 1 processors activated (3992.59 BogoMIPS). [ 13.455169] ENABLING IO-APIC IRQs [ 13.455396] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 13.602905] Brought up 1 CPUs [ 13.603122] Booting paravirtualized kernel on bare hardware [ 13.603247] Time: 0:14:19 Date: 03/04/107 [ 13.603316] NET: Registered protocol family 16 [ 13.603424] EISA bus registered [ 13.603469] ACPI: bus type pci registered [ 13.603566] PCI: PCI BIOS revision 2.10 entry at 0xfd86c, last bus=8 [ 13.603611] PCI: Using configuration type 1 [ 13.603654] Setting up standard PCI resources [ 13.605618] ACPI: Interpreter enabled [ 13.605662] ACPI: Using IOAPIC for interrupt routing [ 13.606098] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 13.606144] PCI: Probing PCI hardware (bus 00) [ 13.607799] Boot video device is 0000:01:05.0 [ 13.608432] PCI: Transparent bridge - 0000:00:14.4 [ 13.608568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 13.610298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 13.611079] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 13.611523] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 13.611966] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 13.612410] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 13.612855] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 13.613298] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 13.613743] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 13.614187] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 13.658919] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 13.659130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 13.659522] Linux Plug and Play Support v0.97 (c) Adam Belay [ 13.659571] pnp: PnP ACPI init [ 13.682857] pnp: PnP ACPI: found 10 devices [ 13.682903] PnPBIOS: Disabled by ACPI PNP [ 13.682978] PCI: Using ACPI for IRQ routing [ 13.683022] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 13.683075] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [ 13.683120] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [ 13.707131] NET: Registered protocol family 8 [ 13.707175] NET: Registered protocol family 20 [ 13.707356] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved [ 13.707402] pnp: 00:08: ioport range 0x40b-0x40b has been reserved [ 13.707448] pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 13.707493] pnp: 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 13.707538] pnp: 00:08: ioport range 0x870-0x87f has been reserved [ 13.707770] PCI: Bridge: 0000:00:01.0 [ 13.707814] IO window: 9000-9fff [ 13.707858] MEM window: b0100000-b01fffff [ 13.707903] PREFETCH window: c0000000-cfffffff [ 13.707947] PCI: Bridge: 0000:00:05.0 [ 13.707990] IO window: disabled. [ 13.708033] MEM window: disabled. [ 13.708076] PREFETCH window: disabled. [ 13.708123] PCI: Bus 7, cardbus bridge: 0000:06:04.0 [ 13.708167] IO window: 0000a400-0000a4ff [ 13.708214] IO window: 0000a800-0000a8ff [ 13.708261] PREFETCH window: 88000000-8bffffff [ 13.708309] MEM window: 8c000000-8fffffff [ 13.708356] PCI: Bridge: 0000:00:14.4 [ 13.708400] IO window: a000-afff [ 13.708448] MEM window: b0200000-b02fffff [ 13.708494] PREFETCH window: 88000000-8bffffff [ 13.708553] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 13.708579] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 13.708696] NET: Registered protocol family 2 [ 13.742813] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 13.743015] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 13.744044] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 13.744627] TCP: Hash tables configured (established 131072 bind 65536) [ 13.744673] TCP reno registered [ 13.754867] checking if image is initramfs... it is [ 14.309745] Freeing initrd memory: 6780k freed [ 14.310169] audit: initializing netlink socket (disabled) [ 14.310225] audit(1175645658.380:1): initialized [ 14.310330] highmem bounce pool size: 64 pages [ 14.310438] VFS: Disk quotas dquot_6.5.1 [ 14.310497] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 14.310584] io scheduler noop registered [ 14.310663] io scheduler anticipatory registered [ 14.310743] io scheduler deadline registered [ 14.310832] io scheduler cfq registered (default) [ 14.311130] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 14.311150] assign_interrupt_mode Found MSI capability [ 14.311195] Allocate Port Service[0000:00:05.0:pcie00] [ 14.311293] isapnp: Scanning for PnP cards... [ 14.665491] isapnp: No Plug & Play device found [ 14.689357] Real Time Clock Driver v1.12ac [ 14.689439] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 14.690039] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 14.690131] ACPI: PCI interrupt for device 0000:00:14.6 disabled [ 14.690232] mice: PS/2 mouse device common for all mice [ 14.690682] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 14.690853] input: Macintosh mouse button emulation as /class/input/input0 [ 14.690923] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 14.690969] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 14.691263] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 14.710599] i8042.c: Detected active multiplexing controller, rev 1.1. [ 14.726663] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 14.726708] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 14.726753] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 14.726797] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 14.726842] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 14.727768] EISA: Probing bus 0 at eisa.0 [ 14.727818] Cannot allocate resource for EISA slot 1 [ 14.727887] Cannot allocate resource for EISA slot 8 [ 14.727931] EISA: Detected 0 cards. [ 14.758027] TCP cubic registered [ 14.758076] NET: Registered protocol family 1 [ 14.758135] Using IPI No-Shortcut mode [ 14.758228] ACPI: (supports S0 S3 S4 S5) [ 14.758484] Magic number: 3:450:202 [ 14.758555] hash matches device ttyt0 [ 14.759004] Freeing unused kernel memory: 328k freed [ 14.761825] Time: tsc clocksource has been installed. [ 14.766208] input: AT Translated Set 2 keyboard as /class/input/input1 [ 15.986957] Capability LSM initialized [ 16.051521] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 16.051527] ACPI: Processor [CPU0] (supports 8 throttling states) [ 16.060428] ACPI Exception (acpi_thermal-0412): AE_NOT_FOUND, Invalid active threshold [0] [20060707] [ 2.952000] ACPI: Thermal Zone [THRM] (0 C) [ 2.960000] Time: acpi_pm clocksource has been installed. [ 3.440000] usbcore: registered new interface driver usbfs [ 3.440000] usbcore: registered new interface driver hub [ 3.440000] usbcore: registered new device driver usb [ 3.440000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.440000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 3.440000] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.440000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 3.440000] ohci_hcd 0000:00:13.0: irq 18, io mem 0xb0000000 [ 3.468000] SCSI subsystem initialized [ 3.472000] libata version 2.20 loaded. [ 3.532000] usb usb1: configuration #1 chosen from 1 choice [ 3.532000] hub 1-0:1.0: USB hub found [ 3.532000] hub 1-0:1.0: 4 ports detected [ 3.568000] ieee1394: Initialized config rom entry `ip1394' [ 3.600000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.636000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18 [ 3.636000] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 3.636000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 3.636000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xb0001000 [ 3.696000] usb usb2: configuration #1 chosen from 1 choice [ 3.696000] hub 2-0:1.0: USB hub found [ 3.696000] hub 2-0:1.0: 4 ports detected [ 3.800000] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 3.800000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19 [ 3.800000] ATIIXP: chipset revision 0 [ 3.800000] ATIIXP: not 100% native mode: will probe irqs later [ 3.800000] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio [ 3.800000] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio [ 3.800000] Probing IDE interface ide0... [ 3.940000] usb 1-4: new full speed USB device using ohci_hcd and address 2 [ 4.092000] hda: ST9120824A, ATA DISK drive [ 4.144000] usb 1-4: configuration #1 chosen from 1 choice [ 4.452000] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 4.664000] usb 2-2: configuration #1 chosen from 1 choice [ 4.684000] usbcore: registered new interface driver hiddev [ 4.696000] input: Logitech USB Gaming Mouse as /class/input/input2 [ 4.696000] input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:13.1-2 [ 4.708000] hiddev96: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:13.1-2 [ 4.708000] usbcore: registered new interface driver usbhid [ 4.708000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 4.764000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.832000] Probing IDE interface ide1... [ 5.568000] hdc: HL-DT-ST DVDRAM GSA-4084N, ATAPI CD/DVD-ROM drive [ 5.904000] ide1 at 0x170-0x177,0x376 on irq 15 [ 5.908000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18 [ 5.908000] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 5.908000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 5.908000] ehci_hcd 0000:00:13.2: irq 18, io mem 0xb0002000 [ 5.908000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.908000] usb 1-4: USB disconnect, address 2 [ 5.912000] usb usb3: configuration #1 chosen from 1 choice [ 5.912000] hub 3-0:1.0: USB hub found [ 5.912000] hub 3-0:1.0: 8 ports detected [ 5.924000] hda: max request size: 128KiB [ 5.924000] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 5.928000] hda: cache flushes supported [ 5.928000] hda: hda1 hda2 <<6>ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 23 (level, low) -> IRQ 20 [ 6.064000] usb 2-2: USB disconnect, address 2 [ 6.064000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[b0209000-b02097ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 6.064000] 8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 6.064000] 8139cp 0000:06:06.0: Try the "8139too" driver instead. [ 6.064000] 8139too Fast Ethernet driver 0.9.28 [ 6.064000] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 6.068000] eth0: RealTek RTL8139 at 0xf8938400, 00:16:d4:03:33:2c, IRQ 21 [ 6.068000] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 6.068000] hda5 > [ 6.076000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA [ 6.076000] Uniform CD-ROM driver Revision: 3.20 [ 6.316000] Attempting manual resume [ 6.316000] swsusp: Resume From Partition 3:5 [ 6.316000] PM: Checking swsusp image. [ 6.316000] PM: Resume from disk failed. [ 6.368000] kjournald starting. Commit interval 5 seconds [ 6.368000] EXT3-fs: mounted filesystem with ordered data mode. [ 6.864000] usb 2-2: new full speed USB device using ohci_hcd and address 3 [ 7.084000] usb 2-2: configuration #1 chosen from 1 choice [ 7.096000] input: Logitech USB Gaming Mouse as /class/input/input3 [ 7.096000] input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:13.1-2 [ 7.108000] hiddev96: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:13.1-2 [ 7.336000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[643f02003dec407d] [ 7.412000] usb 1-4: new full speed USB device using ohci_hcd and address 3 [ 7.624000] usb 1-4: configuration #1 chosen from 1 choice [ 18.840000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 18.844000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.904000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 19.300000] Linux agpgart interface v0.102 (c) Dave Jones [ 19.344000] sdhci: Secure Digital Host Controller Interface driver [ 19.344000] sdhci: Copyright(c) Pierre Ossman [ 19.344000] sdhci: SDHCI controller found at 0000:06:04.4 [104c:8034] (rev 0) [ 19.344000] ACPI: PCI Interrupt 0000:06:04.4[A] -> GSI 20 (level, low) -> IRQ 16 [ 19.344000] mmc0: SDHCI at 0xb020a000 irq 16 DMA [ 19.348000] mmc1: SDHCI at 0xb0209c00 irq 16 DMA [ 19.348000] mmc2: SDHCI at 0xb0209800 irq 16 DMA [ 19.772000] Yenta: CardBus bridge found at 0000:06:04.0 [103c:30a4] [ 19.772000] Yenta: Enabling burst memory read transactions [ 19.772000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 19.772000] Yenta: Routing CardBus interrupts to ISA [ 19.772000] Yenta TI: socket 0000:06:04.0, mfunc 0x00a61b22, devctl 0x64 [ 19.808000] Bluetooth: Core ver 2.11 [ 19.808000] NET: Registered protocol family 31 [ 19.808000] Bluetooth: HCI device and connection manager initialized [ 19.808000] Bluetooth: HCI socket layer initialized [ 19.856000] Bluetooth: HCI USB driver ver 2.9 [ 19.952000] ieee80211_crypt: registered algorithm 'NULL' [ 19.964000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 19.964000] ieee80211: Copyright (C) 2004-2005 Intel Corporation