ndiswrapper -v: utils version: '1.9', utils version needed by module: '1.9' module details: filename: /lib/modules/2.6.24-8-generic/ubuntu/misc/ndiswrapper/ndiswrapper.ko version: 1.52 vermagic: 2.6.24-8-generic SMP mod_unload 586 ndiswrapper -l: wusb11v4 : driver installed device (13B1:000B) present lsusb: Bus 002 Device 002: ID 13b1:000b Linksys WUSB11 v4.0 802.11b Adapter Bus 002 Device 001: ID 0000:0000 Bus 001 Device 004: ID 10d6:1100 Actions Semiconductor Co., Ltd MPMan MP-Ki 128 MP3 Player/Recorder Bus 001 Device 003: ID 05e3:0606 Genesys Logic, Inc. D-Link DUB-H4 USB 2.0 Hub Bus 001 Device 001: ID 0000:0000 dmesg [ 0.000000] Linux version 2.6.24-8-generic (buildd@rothera) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Thu Feb 14 20:40:45 UTC 2008 (Ubuntu 2.6.24-8.14-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037ee0000 (usable) [ 0.000000] BIOS-e820: 0000000037ee0000 - 0000000037ee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037ee3000 - 0000000037ef0000 (ACPI data) [ 0.000000] BIOS-e820: 0000000037ef0000 - 0000000037f00000 (reserved) [ 0.000000] BIOS-e820: 0000000038000000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 894MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f3a00 [ 0.000000] Entering add_active_range(0, 0, 229088) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229088 [ 0.000000] HighMem 229088 -> 229088 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 229088 [ 0.000000] On node 0 totalpages: 229088 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1757 pages used for memmap [ 0.000000] Normal zone: 223235 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7A10 checksum 0 [ 0.000000] ACPI: RSDP 000F7A10, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 37EE3040, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: FACP 37EE30C0, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126] [ 0.000000] ACPI: DSDT 37EE3180, 6395 (r1 NVIDIA NVDAACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 37EE0000, 0040 [ 0.000000] ACPI: SSDT 37EE9640, 0206 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: _HPT 37EE98C0, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 98) [ 0.000000] ACPI: MCFG 37EE9940, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: APIC 37EE9580, 007C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227299 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- locale=pt_BR console-setup/layoutcode=br console-setup/modelcode=abnt2 [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2109.721 MHz processor. [ 33.094217] spurious 8259A interrupt: IRQ7. [ 33.097160] Console: colour VGA+ 80x25 [ 33.097163] console [tty0] enabled [ 33.097540] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 33.097926] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 33.111913] Memory: 896164k/916352k available (2161k kernel code, 19708k reserved, 997k data, 364k init, 0k highmem) [ 33.111920] virtual kernel memory layout: [ 33.111921] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 33.111922] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 33.111923] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 33.111924] lowmem : 0xc0000000 - 0xf7ee0000 ( 894 MB) [ 33.111926] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 33.111927] .data : 0xc031c5ed - 0xc0415dc4 ( 997 kB) [ 33.111928] .text : 0xc0100000 - 0xc031c5ed (2161 kB) [ 33.111930] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 33.111958] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 33.191924] Calibrating delay using timer specific routine.. 4223.91 BogoMIPS (lpj=8447828) [ 33.191945] Security Framework initialized [ 33.191950] SELinux: Disabled at boot. [ 33.191962] AppArmor: AppArmor initialized [ 33.191966] Failure registering capabilities with primary security module. [ 33.191973] Mount-cache hash table entries: 512 [ 33.192070] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 33.192078] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 33.192080] CPU: L2 Cache: 512K (64 bytes/line) [ 33.192083] CPU 0(2) -> Core 0 [ 33.192084] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 33.192092] Compat vDSO mapped to ffffe000. [ 33.192100] Checking 'hlt' instruction... OK. [ 33.208139] SMP alternatives: switching to UP code [ 33.209170] Early unpacking initramfs... done [ 33.503638] ACPI: Core revision 20070126 [ 33.503708] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 33.506997] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01 [ 33.507015] SMP alternatives: switching to SMP code [ 33.507496] Booting processor 1/1 eip 3000 [ 33.517542] Initializing CPU#1 [ 33.595684] Calibrating delay using timer specific routine.. 4219.75 BogoMIPS (lpj=8439501) [ 33.595691] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 33.595697] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 33.595699] CPU: L2 Cache: 512K (64 bytes/line) [ 33.595701] CPU 1(2) -> Core 1 [ 33.595703] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 33.595882] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01 [ 33.595894] Total of 2 processors activated (8443.66 BogoMIPS). [ 33.596130] ENABLING IO-APIC IRQs [ 33.596356] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 33.743646] Brought up 2 CPUs [ 33.743694] CPU0 attaching sched-domain: [ 33.743696] domain 0: span 03 [ 33.743698] groups: 01 02 [ 33.743701] CPU1 attaching sched-domain: [ 33.743702] domain 0: span 03 [ 33.743704] groups: 02 01 [ 33.743888] net_namespace: 64 bytes [ 33.743894] Booting paravirtualized kernel on bare hardware [ 33.744300] Time: 15:23:38 Date: 03/05/08 [ 33.744346] NET: Registered protocol family 16 [ 33.744502] EISA bus registered [ 33.744506] ACPI: bus type pci registered [ 33.750182] PCI: PCI BIOS revision 3.00 entry at 0xfa7b0, last bus=4 [ 33.750184] PCI: Using configuration type 1 [ 33.750186] Setting up standard PCI resources [ 33.754537] ACPI: EC: Look up EC in DSDT [ 33.760074] ACPI: Interpreter enabled [ 33.760077] ACPI: (supports S0 S1 S3 S4 S5) [ 33.760090] ACPI: Using IOAPIC for interrupt routing [ 33.769037] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 33.769588] PCI: Transparent bridge - 0000:00:04.0 [ 33.769762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 33.769980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 33.808775] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 33.808935] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 33.809093] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 33.809249] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 33.809406] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 33.809563] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 33.809720] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 33.809877] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 33.810037] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 *10 11 14 15) [ 33.810194] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 33.810353] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 33.810511] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) [ 33.810669] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 33.810826] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 33.810985] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) [ 33.811142] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) [ 33.811299] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 33.811458] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 33.811619] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 33.811809] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 33.811991] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 33.812173] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 33.812353] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 33.812535] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 33.812716] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 33.812896] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 33.813077] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 33.813258] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 33.813441] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 33.813622] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 33.813804] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 33.813986] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 33.814168] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 33.814349] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 33.814531] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 33.814713] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 33.814899] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 33.815081] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 33.815202] Linux Plug and Play Support v0.97 (c) Adam Belay [ 33.815227] pnp: PnP ACPI init [ 33.815233] ACPI: bus type pnp registered [ 33.820417] pnpacpi: exceeded the max number of mem resources: 12 [ 33.820474] pnp: PnP ACPI: found 14 devices [ 33.820476] ACPI: ACPI bus type pnp unregistered [ 33.820479] PnPBIOS: Disabled by ACPI PNP [ 33.820658] PCI: Using ACPI for IRQ routing [ 33.820662] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 33.887450] NET: Registered protocol family 8 [ 33.887452] NET: Registered protocol family 20 [ 33.887512] AppArmor: AppArmor Filesystem Enabled [ 33.899465] system 00:01: ioport range 0x1000-0x107f has been reserved [ 33.899467] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 33.899470] system 00:01: ioport range 0x1400-0x147f has been reserved [ 33.899472] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 33.899475] system 00:01: ioport range 0x1800-0x187f has been reserved [ 33.899477] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 33.899480] system 00:01: ioport range 0x2000-0x207f has been reserved [ 33.899482] system 00:01: ioport range 0x2080-0x20ff has been reserved [ 33.899485] system 00:01: iomem range 0xfec80000-0xfecbffff could not be reserved [ 33.899488] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved [ 33.899491] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved [ 33.899493] system 00:01: iomem range 0x38000000-0x3fffffff could not be reserved [ 33.899498] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 33.899501] system 00:02: ioport range 0x800-0x87f has been reserved [ 33.899503] system 00:02: ioport range 0x290-0x297 has been reserved [ 33.899512] system 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 33.899517] system 00:0d: iomem range 0xf0000-0xfffff could not be reserved [ 33.899520] system 00:0d: iomem range 0xfeff0000-0xfeff00ff could not be reserved [ 33.899522] system 00:0d: iomem range 0x37ee0000-0x37efffff could not be reserved [ 33.899525] system 00:0d: iomem range 0xffff0000-0xffffffff could not be reserved [ 33.899528] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 33.899530] system 00:0d: iomem range 0x100000-0x37edffff could not be reserved [ 33.899533] system 00:0d: iomem range 0x37f00000-0x3fefffff could not be reserved [ 33.899535] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 33.899538] system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reserved [ 33.899541] system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reserved [ 33.899543] system 00:0d: iomem range 0xfff80000-0xfff80fff could not be reserved [ 33.899546] system 00:0d: iomem range 0xfff90000-0xfffbffff could not be reserved [ 33.929885] PCI: Bridge: 0000:00:04.0 [ 33.929887] IO window: c000-cfff [ 33.929891] MEM window: fdf00000-fdffffff [ 33.929893] PREFETCH window: fd800000-fd8fffff [ 33.929896] PCI: Bridge: 0000:00:09.0 [ 33.929898] IO window: b000-bfff [ 33.929900] MEM window: fde00000-fdefffff [ 33.929902] PREFETCH window: fdd00000-fddfffff [ 33.929904] PCI: Bridge: 0000:00:0b.0 [ 33.929906] IO window: a000-afff [ 33.929908] MEM window: fdc00000-fdcfffff [ 33.929910] PREFETCH window: fdb00000-fdbfffff [ 33.929913] PCI: Bridge: 0000:00:0c.0 [ 33.929914] IO window: 9000-9fff [ 33.929916] MEM window: fda00000-fdafffff [ 33.929918] PREFETCH window: fd900000-fd9fffff [ 33.929929] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 33.929937] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 33.929943] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 33.929949] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 33.929960] NET: Registered protocol family 2 [ 33.931412] Time: acpi_pm clocksource has been installed. [ 33.931428] Switched to high resolution mode on CPU 0 [ 33.931569] Switched to high resolution mode on CPU 1 [ 33.967424] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 33.967691] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 33.968573] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 33.969051] TCP: Hash tables configured (established 131072 bind 65536) [ 33.969054] TCP reno registered [ 33.979485] checking if image is initramfs... it is [ 34.554276] Freeing initrd memory: 7597k freed [ 34.555097] audit: initializing netlink socket (disabled) [ 34.555111] audit(1204730618.344:1): initialized [ 34.556937] VFS: Disk quotas dquot_6.5.1 [ 34.557001] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 34.557108] io scheduler noop registered [ 34.557110] io scheduler anticipatory registered [ 34.557112] io scheduler deadline registered [ 34.557120] io scheduler cfq registered (default) [ 34.571952] Boot video device is 0000:00:0d.0 [ 34.572054] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 34.572074] assign_interrupt_mode Found MSI capability [ 34.572092] Allocate Port Service[0000:00:09.0:pcie00] [ 34.572148] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 34.572168] assign_interrupt_mode Found MSI capability [ 34.572181] Allocate Port Service[0000:00:0b.0:pcie00] [ 34.572234] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 34.572253] assign_interrupt_mode Found MSI capability [ 34.572266] Allocate Port Service[0000:00:0c.0:pcie00] [ 34.572466] isapnp: Scanning for PnP cards... [ 34.924859] isapnp: No Plug & Play device found [ 34.950721] Real Time Clock Driver v1.12ac [ 34.950833] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 34.950945] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 34.951479] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 34.952208] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 34.952270] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 34.952357] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 34.952709] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 34.952714] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 34.971674] mice: PS/2 mouse device common for all mice [ 34.971788] EISA: Probing bus 0 at eisa.0 [ 34.971793] Cannot allocate resource for EISA slot 1 [ 34.971795] Cannot allocate resource for EISA slot 2 [ 34.971811] EISA: Detected 0 cards. [ 34.971814] cpuidle: using governor ladder [ 34.971816] cpuidle: using governor menu [ 34.971895] NET: Registered protocol family 1 [ 34.971917] Using IPI No-Shortcut mode [ 34.971950] registered taskstats version 1 [ 34.972041] Magic number: 0:768:385 [ 34.972449] Freeing unused kernel memory: 364k freed [ 34.992529] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 36.175879] fuse init (API version 7.9) [ 36.181359] ACPI: Fan [FAN] (on) [ 36.188272] ACPI: Thermal Zone [THRM] (37 C) [ 36.660969] usbcore: registered new interface driver usbfs [ 36.660994] usbcore: registered new interface driver hub [ 36.661662] SCSI subsystem initialized [ 36.662552] usbcore: registered new device driver usb [ 36.663145] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 36.663504] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 36.663513] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16 [ 36.663519] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 36.672059] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 36.672066] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 36.700783] libata version 3.00 loaded. [ 36.753276] Floppy drive(s): fd0 is 1.44M [ 36.773208] FDC 0 is a post-1991 82077 [ 37.181245] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:1b:b9:62:c9:95 [ 37.181250] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 37.181366] NFORCE-MCP61: IDE controller (0x10de:0x03ec rev 0xa2) at PCI slot 0000:00:06.0 [ 37.181388] NFORCE-MCP61: not 100% native mode: will probe irqs later [ 37.181394] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller [ 37.181400] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 37.181407] NFORCE-MCP61: IDE port disabled [ 37.181410] Probing IDE interface ide0... [ 37.973224] hdb: TSSTcorpCD/DVDW SH-S182F, ATAPI CD/DVD-ROM drive [ 38.252902] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 38.253042] hdb: UDMA/33 mode selected [ 38.253252] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 38.256264] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 38.256276] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17 [ 38.256288] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 38.256291] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 38.256579] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 38.256607] ehci_hcd 0000:00:02.1: debug port 1 [ 38.256611] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 38.256621] ehci_hcd 0000:00:02.1: irq 17, io mem 0xfe02e000 [ 38.267841] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 38.267945] usb usb1: configuration #1 chosen from 1 choice [ 38.267966] hub 1-0:1.0: USB hub found [ 38.267971] hub 1-0:1.0: 8 ports detected [ 38.373728] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 38.374095] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 38.374105] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 18 [ 38.374117] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 38.374120] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 38.374149] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 38.374167] ohci_hcd 0000:00:02.0: irq 18, io mem 0xfe02f000 [ 38.429800] usb usb2: configuration #1 chosen from 1 choice [ 38.429825] hub 2-0:1.0: USB hub found [ 38.429832] hub 2-0:1.0: 8 ports detected [ 38.532102] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 38.532115] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19 [ 38.532159] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 38.532170] ACPI: PCI interrupt for device 0000:00:08.0 disabled [ 38.542573] sata_nv 0000:00:08.0: version 3.5 [ 38.542585] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19 [ 38.542627] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 38.544921] scsi0 : sata_nv [ 38.545816] scsi1 : sata_nv [ 38.545977] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 19 [ 38.545980] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 19 [ 38.851366] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 38.984573] usb 1-3: configuration #1 chosen from 1 choice [ 38.984897] hub 1-3:1.0: USB hub found [ 38.985128] hub 1-3:1.0: 4 ports detected [ 39.015236] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 39.023481] ata1.00: ATA-8: SAMSUNG HD161HJ, GF100-07, max UDMA7 [ 39.023485] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 39.031466] ata1.00: configured for UDMA/133 [ 39.342963] ata2: SATA link down (SStatus 0 SControl 300) [ 39.353313] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD161HJ GF10 PQ: 0 ANSI: 5 [ 39.359034] Driver 'sd' needs updating - please use bus_type methods [ 39.359119] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 39.359131] sd 0:0:0:0: [sda] Write Protect is off [ 39.359133] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 39.359149] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 39.359190] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 39.359198] sd 0:0:0:0: [sda] Write Protect is off [ 39.359200] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 39.359214] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 39.359217] sda: sda1 sda2 sda3 [ 39.368393] hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 39.368400] Uniform CD-ROM driver Revision: 3.20 [ 39.376299] sd 0:0:0:0: [sda] Attached SCSI disk [ 39.380361] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 39.391975] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 39.602970] usb 2-2: configuration #1 chosen from 1 choice [ 50.291596] end_request: I/O error, dev fd0, sector 0 [ 62.448817] end_request: I/O error, dev fd0, sector 0 [ 62.448821] Buffer I/O error on device fd0, logical block 0 [ 74.602409] end_request: I/O error, dev fd0, sector 0 [ 74.602412] Buffer I/O error on device fd0, logical block 0 [ 87.780721] end_request: I/O error, dev fd0, sector 0 [ 99.937865] end_request: I/O error, dev fd0, sector 0 [ 99.937869] Buffer I/O error on device fd0, logical block 0 [ 112.088031] end_request: I/O error, dev fd0, sector 0 [ 112.088034] Buffer I/O error on device fd0, logical block 0 [ 114.177926] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 114.244348] ISO 9660 Extensions: RRIP_1991A [ 114.532423] Registering unionfs 1.4 [ 114.532427] unionfs: debugging is not enabled [ 114.541157] loop: module loaded [ 114.807499] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 157.669856] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 157.669879] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400 [ 158.856025] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 159.021714] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 159.222708] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 159.396816] input: Power Button (FF) as /devices/virtual/input/input3 [ 159.428064] ACPI: Power Button (FF) [PWRF] [ 159.428139] input: Power Button (CM) as /devices/virtual/input/input4 [ 159.440043] ACPI: Power Button (CM) [PWRB] [ 159.455626] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 159.773414] Linux agpgart interface v0.102 [ 160.003861] parport_pc 00:09: reported by Plug and Play ACPI [ 160.003914] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 160.618835] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 160.618841] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 16 [ 160.618865] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 162.275256] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k [ 162.879628] ip_tables: (C) 2000-2006 Netfilter Core Team [ 164.228897] No dock devices found. [ 164.351073] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 165.616975] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (2 cpu cores) (version 2.20.00) [ 165.616926] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xa [ 165.616931] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xb [ 165.616933] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xd [ 165.616935] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 167.850816] NET: Registered protocol family 10 [ 167.851053] lo: Disabled Privacy Extensions [ 167.969551] lp0: using parport0 (interrupt-driven). [ 168.019464] ppdev: user-space parallel port driver [ 170.166776] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 170.166784] apm: disabled - APM is not SMP safe. [ 171.752979] Clocksource tsc unstable (delta = -64969900 ns) [ 172.697612] eth0: no link during initialization. [ 172.698807] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 172.855310] Bluetooth: Core ver 2.11 [ 172.855371] NET: Registered protocol family 31 [ 172.855373] Bluetooth: HCI device and connection manager initialized [ 172.855379] Bluetooth: HCI socket layer initialized [ 172.913679] Bluetooth: L2CAP ver 2.9 [ 172.913684] Bluetooth: L2CAP socket layer initialized [ 172.916770] Bluetooth: RFCOMM socket layer initialized [ 172.916783] Bluetooth: RFCOMM TTY layer initialized [ 172.916784] Bluetooth: RFCOMM ver 1.8 [ 215.778353] usb 1-3.1: new full speed USB device using ehci_hcd and address 4 [ 215.823273] usb 1-3.1: configuration #1 chosen from 1 choice [ 216.316599] usbcore: registered new interface driver libusual [ 216.334388] Initializing USB Mass Storage driver... [ 216.343152] scsi2 : SCSI emulation for USB Mass Storage devices [ 216.343250] usb-storage: device found at 4 [ 216.343254] usb-storage: waiting for device to settle before scanning [ 216.343360] usbcore: registered new interface driver usb-storage [ 216.343363] USB Mass Storage support registered. [ 218.720718] usb-storage: device scan complete [ 218.720894] scsi scan: INQUIRY result too short (5), using 36 [ 218.720900] scsi 2:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 218.721595] sd 2:0:0:0: [sdb] 503521 512-byte hardware sectors (258 MB) [ 218.721953] sd 2:0:0:0: [sdb] Write Protect is off [ 218.721958] sd 2:0:0:0: [sdb] Mode Sense: 00 c0 00 00 [ 218.721960] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 218.722845] sd 2:0:0:0: [sdb] 503521 512-byte hardware sectors (258 MB) [ 218.723197] sd 2:0:0:0: [sdb] Write Protect is off [ 218.723200] sd 2:0:0:0: [sdb] Mode Sense: 00 c0 00 00 [ 218.723202] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 218.723206] sdb: unknown partition table [ 218.734754] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 218.735237] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 302.504576] ndiswrapper version 1.52 loaded (smp=yes, preempt=no) [ 302.600071] usb 2-2: reset full speed USB device using ohci_hcd and address 2 [ 302.704522] ndiswrapper: driver wusb11v4 (Linksys, A Division of Cisco Systems, Inc.,12/16/2004, 3.112.1216.2004) loaded [ 303.255530] wlan0: ethernet device 00:12:17:a4:e7:e5 using NDIS driver: wusb11v4, version: 0x370, NDIS version: 0x501, vendor: 'M4301 NDIS Miniport Driver', 13B1:000B.F.conf [ 303.256994] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA [ 303.257501] usbcore: registered new interface driver ndiswrapper [ 304.028732] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 309.154734] wlan0: no IPv6 routers present [ 439.678480] eth0: no link during initialization. [ 439.679662] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 444.549665] wlan0: no IPv6 routers present [ 452.231951] NET: Registered protocol family 17 ifconfig wlan0: wlan0 Link encap:Ethernet HWaddr 00:12:17:a4:e7:e5 inet6 addr: fe80::212:17ff:fea4:e7e5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:12231 (11.9 KB)