[ 0.000000] Linux version 2.6.24-5-generic (buildd@yellow) (gcc version 4.2.3 20080114 (prerelease) (Ubuntu 4.2.2-7ubuntu1)) #1 SMP Thu Jan 24 19:29:14 UTC 2008 (Ubuntu 2.6.24-5.8-generic) [ 0.000000] Command line: root=UUID=4b682b78-1585-4e10-95d6-d756e6f88cb4 ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff60000 (usable) [ 0.000000] BIOS-e820: 000000007ff60000 - 000000007ff6e000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff6e000 - 000000007ff6f000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff6f000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524128) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8590 checksum 0 [ 0.000000] ACPI: RSDP 000F8590, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 7FF6440F, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP 7FF6D92A, 00F4 (r3 NVIDIA MCP65-E 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 7FF6447B, 943B (r1 NVIDIA MCP65 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 7FF6EFC0, 0040 [ 0.000000] ACPI: SRAT 7FF6DA1E, 00A0 (r1 AMD HAMMER 6040000 AMD 1) [ 0.000000] ACPI: WDAT 7FF6DABE, 0104 (r1 PTLTD WDATTBL 6040000 LTP 1) [ 0.000000] ACPI: SSDT 7FF6DBC2, 01C4 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: MCFG 7FF6DD86, 003C (r1 HP MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 7FF6DDC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC 7FF6DDFA, 0068 (r1 HP APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7FF6DE62, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7FF6DE8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 0-80000000 [ 0.000000] Entering add_active_range(0, 0, 157) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524128) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff60000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 524128 [ 0.000000] On node 0 totalpages: 524029 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1207 pages reserved [ 0.000000] DMA zone: 2734 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7109 pages used for memmap [ 0.000000] DMA32 zone: 512923 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515657 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=4b682b78-1585-4e10-95d6-d756e6f88cb4 ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 27.770346] Marking TSC unstable due to TSCs unsynchronized [ 27.770348] time.c: Detected 1808.200 MHz processor. [ 27.772977] Console: colour VGA+ 80x25 [ 27.772981] console [tty0] enabled [ 27.779235] Checking aperture... [ 27.779317] CPU 0: aperture @ e062000000 size 32 MB [ 27.779402] Aperture too small (32 MB) [ 27.785678] No AGP bridge found [ 27.804020] Memory: 2054940k/2096512k available (2460k kernel code, 41176k reserved, 1302k data, 316k init) [ 27.804156] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 27.880269] Calibrating delay using timer specific routine.. 3620.04 BogoMIPS (lpj=7240089) [ 27.880468] Security Framework initialized [ 27.880555] SELinux: Disabled at boot. [ 27.880651] AppArmor: AppArmor initialized [ 27.880736] Failure registering capabilities with primary security module. [ 27.880994] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 27.882282] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 27.882924] Mount-cache hash table entries: 256 [ 27.883141] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 27.883229] CPU: L2 Cache: 512K (64 bytes/line) [ 27.883314] CPU 0/0 -> Node 0 [ 27.883397] CPU: Physical Processor ID: 0 [ 27.883480] CPU: Processor Core ID: 0 [ 27.883586] SMP alternatives: switching to UP code [ 27.884307] Early unpacking initramfs... done [ 28.220030] ACPI: Core revision 20070126 [ 28.220215] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 28.468501] Using local APIC timer interrupts. [ 28.523863] APIC timer calibration result 12556950 [ 28.523865] Detected 12.556 MHz APIC timer. [ 28.524047] SMP alternatives: switching to SMP code [ 28.524632] Booting processor 1/2 APIC 0x1 [ 28.535754] Initializing CPU#1 [ 28.612850] Calibrating delay using timer specific routine.. 3616.40 BogoMIPS (lpj=7232810) [ 28.612857] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 28.612859] CPU: L2 Cache: 512K (64 bytes/line) [ 28.612861] CPU 1/1 -> Node 0 [ 28.612863] CPU: Physical Processor ID: 0 [ 28.612864] CPU: Processor Core ID: 1 [ 28.612975] AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 01 [ 28.612989] AMD C1E detected late. Force timer broadcast. [ 28.612093] Brought up 2 CPUs [ 28.612293] CPU0 attaching sched-domain: [ 28.612296] domain 0: span 03 [ 28.612297] groups: 01 02 [ 28.612300] domain 1: span 03 [ 28.612302] groups: 03 [ 28.612304] CPU1 attaching sched-domain: [ 28.612306] domain 0: span 03 [ 28.612307] groups: 02 01 [ 28.612310] domain 1: span 03 [ 28.612311] groups: 03 [ 28.612553] net_namespace: 120 bytes [ 28.613068] Time: 18:33:55 Date: 02/03/08 [ 28.613127] NET: Registered protocol family 16 [ 28.613339] ACPI: bus type pci registered [ 28.613500] PCI: Using configuration type 1 [ 28.614820] ACPI: EC: Look up EC in DSDT [ 28.616658] ACPI: System BIOS is requesting _OSI(Linux) [ 28.616745] ACPI: If "acpi_osi=Linux" works better, [ 28.616746] Please send dmidecode to linux-acpi@vger.kernel.org [ 28.617509] ACPI: Interpreter enabled [ 28.617594] ACPI: (supports S0 S3 S4 S5) [ 28.617958] ACPI: Using IOAPIC for interrupt routing [ 28.619515] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 28.625611] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 28.625703] ACPI: EC: driver started in interrupt mode [ 28.625858] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 28.626772] PCI: Transparent bridge - 0000:00:08.0 [ 28.627231] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 28.627309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 28.627339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] [ 28.627375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 28.627407] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 28.627442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR3._PRT] [ 28.651721] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *15 [ 28.652287] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *10 [ 28.652840] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 28.653468] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 28.654088] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11 [ 28.654642] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 28.655264] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 28.655885] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *15 [ 28.656439] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 28.656926] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 [ 28.657492] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7 [ 28.658045] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 [ 28.658600] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *11 [ 28.659154] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. [ 28.659776] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5 [ 28.660327] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *0, disabled. [ 28.660892] Linux Plug and Play Support v0.97 (c) Adam Belay [ 28.661007] pnp: PnP ACPI init [ 28.661098] ACPI: bus type pnp registered [ 28.663353] ACPI Error (dsopcode-0548): Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) [20070126] [ 28.663593] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff81007c350920), AE_AML_BUFFER_LIMIT [ 28.663937] ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff81007c350920), AE_AML_BUFFER_LIMIT [ 28.664246] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 [ 28.666106] pnp: PnP ACPI: found 11 devices [ 28.666194] ACPI: ACPI bus type pnp unregistered [ 28.666569] PCI: Using ACPI for IRQ routing [ 28.666653] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 28.678164] NET: Registered protocol family 8 [ 28.678248] NET: Registered protocol family 20 [ 28.678432] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 28.678785] hpet0: 3 32-bit timers, 25000000 Hz [ 28.679922] AppArmor: AppArmor Filesystem Enabled [ 28.680021] ACPI: RTC can wake from S4 [ 28.681225] Time: hpet clocksource has been installed. [ 28.681313] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 28.681480] Could not switch to high resolution mode on CPU 0 [ 28.686150] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 28.686317] Could not switch to high resolution mode on CPU 1 [ 28.694207] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved [ 28.694311] system 00:03: ioport range 0x360-0x361 has been reserved [ 28.694397] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 28.694492] system 00:0a: iomem range 0xffc00000-0xffffffff could not be reserved [ 28.696238] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 28.696338] system 00:0a: iomem range 0xfed00000-0xfed00fff has been reserved [ 28.696426] system 00:0a: iomem range 0xfec80000-0xfec80fff has been reserved [ 28.696515] system 00:0a: iomem range 0xfef00000-0xfef00fff has been reserved [ 28.697098] PCI: Bridge: 0000:00:08.0 [ 28.697181] IO window: disabled. [ 28.697265] MEM window: f2100000-f21fffff [ 28.697349] PREFETCH window: disabled. [ 28.697433] PCI: Bridge: 0000:00:0b.0 [ 28.697515] IO window: disabled. [ 28.697599] MEM window: disabled. [ 28.697681] PREFETCH window: disabled. [ 28.697765] PCI: Bridge: 0000:00:0c.0 [ 28.697847] IO window: disabled. [ 28.697929] MEM window: f2000000-f20fffff [ 28.698012] PREFETCH window: disabled. [ 28.698098] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:05:00.0 [ 28.698199] PCI: Bridge: 0000:00:0d.0 [ 28.698282] IO window: 4000-4fff [ 28.698372] MEM window: cc000000-ceffffff [ 28.698456] PREFETCH window: d0000000-dfffffff [ 28.698540] PCI: Bridge: 0000:00:0e.0 [ 28.698623] IO window: 5000-5fff [ 28.698705] MEM window: f0000000-f1ffffff [ 28.698789] PREFETCH window: f2600000-f27fffff [ 28.698881] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 28.698890] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 28.698897] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 28.698904] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 28.698910] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 28.698968] NET: Registered protocol family 2 [ 28.742233] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 28.743134] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 28.745419] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 28.746076] TCP: Hash tables configured (established 262144 bind 65536) [ 28.746179] TCP reno registered [ 28.758269] checking if image is initramfs... it is [ 29.432030] Freeing initrd memory: 7486k freed [ 29.436238] Simple Boot Flag at 0x36 set to 0x1 [ 29.436307] audit: initializing netlink socket (disabled) [ 29.436404] audit(1202063635.416:1): initialized [ 29.438671] VFS: Disk quotas dquot_6.5.1 [ 29.438830] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 29.439050] io scheduler noop registered [ 29.439134] io scheduler anticipatory registered [ 29.439219] io scheduler deadline registered [ 29.439410] io scheduler cfq registered (default) [ 29.440268] Boot video device is 0000:05:00.0 [ 29.440443] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 29.440467] assign_interrupt_mode Found MSI capability [ 29.440572] Allocate Port Service[0000:00:0b.0:pcie00] [ 29.440639] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 29.440661] assign_interrupt_mode Found MSI capability [ 29.440760] Allocate Port Service[0000:00:0c.0:pcie00] [ 29.440836] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 29.440859] assign_interrupt_mode Found MSI capability [ 29.440957] Allocate Port Service[0000:00:0d.0:pcie00] [ 29.441020] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 29.441042] assign_interrupt_mode Found MSI capability [ 29.441141] Allocate Port Service[0000:00:0e.0:pcie00] [ 29.471743] Real Time Clock Driver v1.12ac [ 29.472034] hpet_resources: 0xfed00000 is busy [ 29.472073] Linux agpgart interface v0.102 [ 29.472158] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 29.473412] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 29.473584] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 29.473788] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 29.501614] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 29.501703] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 29.512813] mice: PS/2 mouse device common for all mice [ 29.512937] cpuidle: using governor ladder [ 29.513021] cpuidle: using governor menu [ 29.513265] NET: Registered protocol family 1 [ 29.513408] registered taskstats version 1 [ 29.513624] Magic number: 12:138:594 [ 29.513854] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 29.513961] Freeing unused kernel memory: 316k freed [ 29.532381] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 29.708000] fuse init (API version 7.9) [ 29.717835] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 29.718198] ACPI: Processor [CPU0] (supports 8 throttling states) [ 29.719475] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 29.719838] ACPI: Processor [CPU1] (supports 8 throttling states) [ 29.721435] ACPI Exception (thermal-0339): AE_BAD_DATA, No critical threshold [20070126] [ 30.125282] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16 [ 30.125380] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 16 (level, low) -> IRQ 16 [ 30.125619] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 30.141542] usbcore: registered new interface driver usbfs [ 30.141650] usbcore: registered new interface driver hub [ 30.141807] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 30.142259] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 30.142353] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 30.142593] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 30.152688] usbcore: registered new device driver usb [ 30.161751] SCSI subsystem initialized [ 30.188399] WARNING: at /build/buildd/linux-2.6.24/drivers/ssb/main.c:883 ssb_tmslow_reject_bitmask() [ 30.188507] Pid: 1525, comm: modprobe Not tainted 2.6.24-5-generic #1 [ 30.188593] [ 30.188594] Call Trace: [ 30.188764] [] :ssb:ssb_tmslow_reject_bitmask+0x4a/0x60 [ 30.188855] [] :ssb:ssb_device_is_enabled+0x16/0x50 [ 30.188945] [] :ssb:ssb_pcicore_init+0x21/0x70 [ 30.189033] [] :ssb:ssb_attach_queued_buses+0x106/0x2d0 [ 30.189124] [] :ssb:ssb_pci_get_invariants+0x0/0x2d0 [ 30.189214] [] :ssb:ssb_bus_register+0x17e/0x200 [ 30.189303] [] :ssb:ssb_bus_pcibus_register+0x32/0x60 [ 30.189393] [] :ssb:ssb_pcihost_probe+0x7d/0xc0 [ 30.189484] [] pci_device_probe+0xf8/0x170 [ 30.189571] [] driver_probe_device+0x9c/0x1b0 [ 30.189658] [] __driver_attach+0xc9/0xd0 [ 30.189744] [] __driver_attach+0x0/0xd0 [ 30.189830] [] bus_for_each_dev+0x4d/0x80 [ 30.189916] [] bus_add_driver+0xac/0x220 [ 30.190003] [] __pci_register_driver+0x69/0xb0 [ 30.190091] [] :ssb:ssb_modinit+0x52/0x80 [ 30.190179] [] sys_init_module+0x18e/0x1a90 [ 30.190267] [] bus_register+0x0/0x270 [ 30.190354] [] system_call+0x7e/0x83 [ 30.190439] [ 30.190578] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 30.211617] libata version 3.00 loaded. [ 30.210800] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 30.660837] forcedeth 0000:00:06.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:77:30:6a [ 30.660943] forcedeth 0000:00:06.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 30.661572] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17 [ 30.661666] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 17 (level, low) -> IRQ 17 [ 30.662099] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 30.662107] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 30.662456] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 30.662586] ehci_hcd 0000:00:02.1: debug port 1 [ 30.662672] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 30.662684] ehci_hcd 0000:00:02.1: irq 17, io mem 0xf2488000 [ 30.672117] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 30.672355] usb usb1: configuration #1 chosen from 1 choice [ 30.672467] hub 1-0:1.0: USB hub found [ 30.672556] hub 1-0:1.0: 10 ports detected [ 30.777492] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 30.777591] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 30.778027] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 30.778034] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 30.778177] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 30.778297] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf2486000 [ 30.839099] usb usb2: configuration #1 chosen from 1 choice [ 30.839215] hub 2-0:1.0: USB hub found [ 30.839304] hub 2-0:1.0: 10 ports detected [ 30.945075] pata_amd 0000:00:09.0: version 0.3.10 [ 30.945131] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 30.946027] scsi0 : pata_amd [ 30.946182] scsi1 : pata_amd [ 30.946855] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 30.946943] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 31.255744] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 31.276952] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2 [ 31.403484] usb 1-4: configuration #1 chosen from 1 choice [ 31.456764] ata1.00: configured for MWDMA2 [ 31.456886] ata2: port disabled. ignoring. [ 31.460388] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NC08 PQ: 0 ANSI: 5 [ 31.461376] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 31.461472] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 31.513825] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f2100000-f21007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 31.517446] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 31.517546] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LTID] -> GSI 23 (level, low) -> IRQ 23 [ 31.517817] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 31.517828] ACPI: PCI interrupt for device 0000:00:0a.0 disabled [ 31.521261] ahci 0000:00:0a.0: version 3.0 [ 31.521277] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LTID] -> GSI 23 (level, low) -> IRQ 23 [ 31.975267] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 32.214192] usb 2-3: configuration #1 chosen from 1 choice [ 32.522900] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 32.523005] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pmp pio [ 32.524766] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 32.525059] scsi2 : ahci [ 32.525454] scsi3 : ahci [ 32.525694] scsi4 : ahci [ 32.525930] scsi5 : ahci [ 32.526093] ata3: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484100 irq 23 [ 32.526192] ata4: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484180 irq 23 [ 32.526291] ata5: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484200 irq 23 [ 32.526391] ata6: SATA max UDMA/133 abar m8192@0xf2484000 port 0xf2484280 irq 23 [ 32.531838] usb 2-9: new full speed USB device using ohci_hcd and address 3 [ 32.748843] usb 2-9: configuration #1 chosen from 1 choice [ 32.807779] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0058c23e00] [ 33.179396] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 33.179955] ata3.00: ATA-7: TOSHIBA MK1237GSX, DL132C, max UDMA/100 [ 33.180042] ata3.00: 234441648 sectors, multi 16: LBA48 [ 33.180663] ata3.00: configured for UDMA/100 [ 33.842943] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 33.843499] ata4.00: ATA-7: TOSHIBA MK1237GSX, DL132C, max UDMA/100 [ 33.843586] ata4.00: 234441648 sectors, multi 16: LBA48 [ 33.844207] ata4.00: configured for UDMA/100 [ 34.170723] ata5: SATA link down (SStatus 0 SControl 300) [ 34.498509] ata6: SATA link down (SStatus 0 SControl 300) [ 34.497781] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5 [ 34.498336] scsi 3:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5 [ 34.504920] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 34.505012] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 34.506981] Driver 'sd' needs updating - please use bus_type methods [ 34.513682] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 34.513784] sd 2:0:0:0: [sda] Write Protect is off [ 34.513869] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 34.513886] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.514050] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 34.514143] sd 2:0:0:0: [sda] Write Protect is off [ 34.514227] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 34.514241] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.514342] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 34.534812] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 34.534914] Uniform CD-ROM driver Revision: 3.20 [ 34.535042] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 34.863346] sda1 [ 34.863572] sd 2:0:0:0: [sda] Attached SCSI disk [ 34.863730] sd 3:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) [ 34.863827] sd 3:0:0:0: [sdb] Write Protect is off [ 34.863914] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 34.863930] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.864084] sd 3:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) [ 34.864178] sd 3:0:0:0: [sdb] Write Protect is off [ 34.864261] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 34.864276] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.864378] sdb: sdb1 sdb2 < sdb5 > [ 34.954606] sd 3:0:0:0: [sdb] Attached SCSI disk [ 34.963154] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 34.963263] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 34.963367] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 35.136445] Attempting manual resume [ 35.136531] swsusp: Resume From Partition 8:21 [ 35.136533] PM: Checking swsusp image. [ 35.136696] PM: Resume from disk failed. [ 35.177404] kjournald starting. Commit interval 5 seconds [ 35.177502] EXT3-fs: mounted filesystem with ordered data mode. [ 42.913231] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 42.945240] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 43.029225] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 43.089215] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 43.089319] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 43.125180] input: Power Button (FF) as /devices/virtual/input/input3 [ 43.140963] ACPI: Power Button (FF) [PWRF] [ 43.141147] input: Lid Switch as /devices/virtual/input/input4 [ 43.142291] ACPI: Lid Switch [LID] [ 43.142460] input: Power Button (CM) as /devices/virtual/input/input5 [ 43.176929] ACPI: Power Button (CM) [PWRB] [ 43.177111] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 43.200926] ACPI: Sleep Button (CM) [SLPB] [ 43.257540] ACPI: AC Adapter [ACAD] (on-line) [ 43.480944] ricoh-mmc: Ricoh MMC Controller disabling driver [ 43.481019] ricoh-mmc: Copyright(c) Philip Langdale [ 43.481129] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 12) [ 43.481217] ricoh-mmc: Controller is now disabled. [ 43.523931] sdhci: Secure Digital Host Controller Interface driver [ 43.524006] sdhci: Copyright(c) Pierre Ossman [ 43.524117] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 22) [ 43.524548] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 43.524626] ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 43.524996] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 43.525163] mmc0: SDHCI at 0xf2100800 irq 7 DMA [ 43.557127] ACPI: Battery Slot [BAT0] (battery present) [ 43.814650] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 43.832570] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 43.835879] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:25/LNXVIDEO:01/input/input8 [ 43.868547] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 44.397251] ndiswrapper version 1.52 loaded (smp=yes, preempt=no) [ 44.551765] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 44.631948] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 44.719724] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 44.719808] ACPI: PCI Interrupt 0000:00:07.0[B] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 44.720200] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 44.736258] Bluetooth: Core ver 2.11 [ 44.736406] NET: Registered protocol family 31 [ 44.736539] Bluetooth: HCI device and connection manager initialized [ 44.736677] Bluetooth: HCI socket layer initialized [ 44.756195] Bluetooth: HCI USB driver ver 2.9 [ 45.047218] usbcore: registered new interface driver ndiswrapper [ 45.048349] usbcore: registered new interface driver hci_usb [ 45.049397] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 45.049477] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 19 [ 45.049664] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 45.049832] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008 [ 46.878461] loop: module loaded [ 46.917130] lp: driver loaded but no devices found [ 47.151242] Adding 4803392k swap on /dev/sdb5. Priority:-1 extents:1 across:4803392k [ 47.439752] EXT3 FS on sdb1, internal journal