happening to me a lot.. ** (nautilus:7115): WARNING **: Unable to add monitor: Operation not supported SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSNautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' returned error 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error No such file or directory Please ask your system administrator to enable user sharing. Nautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' returned error 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error No such file or directory Please ask your system administrator to enable user sharing. --- Hash table keys for warning below: --> file:///usr --> file:///root --> file:///usr/share --> file:/// (nautilus:7115): Eel-WARNING **: "nautilus-metafile.c: metafiles" hash table still has 4 elements at quit time (keys above) (nautilus:7115): Eel-WARNING **: "nautilus-directory.c: directories" hash table still has 4 elements at quit time [ 0.422053] ENABLING IO-APIC IRQs [ 0.422227] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.461921] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 [ 0.464029] Brought up 1 CPUs [ 0.464029] Total of 1 processors activated (5186.98 BogoMIPS). [ 0.464029] CPU0 attaching sched-domain: [ 0.464029] domain 0: span 0 level CPU [ 0.464029] groups: 0 [ 0.464029] net_namespace: 840 bytes [ 0.464029] Booting paravirtualized kernel on bare hardware [ 0.464029] Time: 9:32:35 Date: 12/14/08 [ 0.464029] NET: Registered protocol family 16 [ 0.464029] EISA bus registered [ 0.464029] ACPI: bus type pci registered [ 0.464029] PCI: PCI BIOS revision 2.10 entry at 0xfbb30, last bus=2 [ 0.464029] PCI: Using configuration type 1 for base access [ 0.464029] ACPI: EC: Look up EC in DSDT [ 0.491429] ACPI: Interpreter enabled [ 0.491435] ACPI: (supports S0 S1 S3 S4 S5) [ 0.491458] ACPI: Using IOAPIC for interrupt routing [ 0.519353] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.519453] PCI: 0000:00:00.0 reg 10 32bit mmio: [e8000000, efffffff] [ 0.519574] PCI: 0000:00:1d.0 reg 20 io port: [ff80, ff9f] [ 0.519625] PCI: 0000:00:1d.1 reg 20 io port: [ff60, ff7f] [ 0.519674] PCI: 0000:00:1d.2 reg 20 io port: [ff40, ff5f] [ 0.519723] PCI: 0000:00:1d.3 reg 20 io port: [ff20, ff3f] [ 0.519780] PCI: 0000:00:1d.7 reg 10 32bit mmio: [ffa80800, ffa80bff] [ 0.519831] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.519837] pci 0000:00:1d.7: PME# disabled [ 0.519910] pci 0000:00:1f.0: HPET at 0xfed00000 [ 0.519916] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.519921] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO [ 0.519940] PCI: 0000:00:1f.1 reg 10 io port: [1f0, 1f7] [ 0.519947] PCI: 0000:00:1f.1 reg 14 io port: [3f4, 3f7] [ 0.519954] PCI: 0000:00:1f.1 reg 18 io port: [170, 177] [ 0.519961] PCI: 0000:00:1f.1 reg 1c io port: [374, 377] [ 0.519968] PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf] [ 0.519975] PCI: 0000:00:1f.1 reg 24 32bit mmio: [febffc00, febfffff] [ 0.520004] PCI: 0000:00:1f.2 reg 10 io port: [fe00, fe07] [ 0.520011] PCI: 0000:00:1f.2 reg 14 io port: [fe10, fe13] [ 0.520018] PCI: 0000:00:1f.2 reg 18 io port: [fe20, fe27] [ 0.520053] PCI: 0000:00:1f.2 reg 1c io port: [fe30, fe33] [ 0.520060] PCI: 0000:00:1f.2 reg 20 io port: [fea0, feaf] [ 0.520109] PCI: 0000:00:1f.3 reg 20 io port: [eda0, edbf] [ 0.520150] PCI: 0000:00:1f.5 reg 10 io port: [ee00, eeff] [ 0.520156] PCI: 0000:00:1f.5 reg 14 io port: [edc0, edff] [ 0.520163] PCI: 0000:00:1f.5 reg 18 32bit mmio: [febffa00, febffbff] [ 0.520170] PCI: 0000:00:1f.5 reg 1c 32bit mmio: [febff900, febff9ff] [ 0.520195] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.520200] pci 0000:00:1f.5: PME# disabled [ 0.520232] PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff] [ 0.520239] PCI: 0000:01:00.0 reg 14 32bit mmio: [f0000000, f7ffffff] [ 0.520259] PCI: 0000:01:00.0 reg 30 32bit mmio: [fea00000, fea1ffff] [ 0.520303] PCI: bridge 0000:00:01.0 32bit mmio: [fd000000, feafffff] [ 0.520308] PCI: bridge 0000:00:01.0 32bit mmio pref: [f0000000, f7ffffff] [ 0.520342] PCI: 0000:02:00.0 reg 10 32bit mmio: [fcffa800, fcffafff] [ 0.520350] PCI: 0000:02:00.0 reg 14 32bit mmio: [fcffc000, fcffffff] [ 0.520385] pci 0000:02:00.0: supports D1 [ 0.520387] pci 0000:02:00.0: supports D2 [ 0.520389] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 0.520394] pci 0000:02:00.0: PME# disabled [ 0.520426] PCI: 0000:02:08.0 reg 10 32bit mmio: [fcffb000, fcffbfff] [ 0.520433] PCI: 0000:02:08.0 reg 14 io port: [df40, df7f] [ 0.520468] pci 0000:02:08.0: supports D1 [ 0.520470] pci 0000:02:08.0: supports D2 [ 0.520472] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.520476] pci 0000:02:08.0: PME# disabled [ 0.520504] pci 0000:00:1e.0: transparent bridge [ 0.520508] PCI: bridge 0000:00:1e.0 io port: [d000, dfff] [ 0.520513] PCI: bridge 0000:00:1e.0 32bit mmio: [fcf00000, fcffffff] [ 0.520529] bus 00 -> node 0 [ 0.520537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.521093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.628807] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.629150] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.629493] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.629833] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.630174] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.630514] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.630852] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.631194] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.631464] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.631517] pnp: PnP ACPI init [ 0.631528] ACPI: bus type pnp registered [ 0.653440] pnp 00:0a: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling [ 0.653446] pnp 00:0a: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling [ 0.654276] pnp: PnP ACPI: found 11 devices [ 0.654280] ACPI: ACPI bus type pnp unregistered [ 0.654285] PnPBIOS: Disabled by ACPI PNP [ 0.654773] PCI: Using ACPI for IRQ routing [ 0.654915] NET: Registered protocol family 8 [ 0.654915] NET: Registered protocol family 20 [ 0.654915] NetLabel: Initializing [ 0.654915] NetLabel: domain hash size = 128 [ 0.654915] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.654915] NetLabel: unlabeled traffic allowed by default [ 0.654915] hpet clockevent registered [ 0.654915] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.654915] hpet0: 3 64-bit timers, 14318180 Hz [ 0.657212] tracer: 772 pages allocated for 65536 entries of 48 bytes [ 0.657215] actual entries 65620 [ 0.657355] AppArmor: AppArmor Filesystem Enabled [ 0.657376] ACPI: RTC can wake from S4 [ 0.657393] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.657393] system 00:00: iomem range 0x100000-0xffffff could not be reserved [ 0.657393] system 00:00: iomem range 0x1000000-0x3ff73fff could not be reserved [ 0.657393] system 00:00: iomem range 0xc0000-0xfffff could not be reserved [ 0.657393] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.657393] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 0.657393] system 00:00: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 0.657393] system 00:00: iomem range 0xfecf0000-0xfecf0fff could not be reserved [ 0.657393] system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved [ 0.657393] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.657393] system 00:0a: ioport range 0xc00-0xc7f has been reserved [ 0.692893] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.692897] pci 0000:00:01.0: IO window: disabled [ 0.692903] pci 0000:00:01.0: MEM window: 0xfd000000-0xfeafffff [ 0.692908] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff [ 0.692914] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.692918] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.692924] pci 0000:00:1e.0: MEM window: 0xfcf00000-0xfcffffff [ 0.692929] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.692947] pci 0000:00:1e.0: setting latency timer to 64 [ 0.692952] bus: 00 index 0 io port: [0, ffff] [ 0.692954] bus: 00 index 1 mmio: [0, ffffffff] [ 0.692957] bus: 01 index 0 mmio: [0, 0] [ 0.692959] bus: 01 index 1 mmio: [fd000000, feafffff] [ 0.692963] bus: 01 index 2 mmio: [f0000000, f7ffffff] [ 0.692966] bus: 01 index 3 mmio: [0, 0] [ 0.692968] bus: 02 index 0 io port: [d000, dfff] [ 0.692971] bus: 02 index 1 mmio: [fcf00000, fcffffff] [ 0.692973] bus: 02 index 2 mmio: [0, 0] [ 0.692975] bus: 02 index 3 io port: [0, ffff] [ 0.692977] bus: 02 index 4 mmio: [0, ffffffff] [ 0.692990] NET: Registered protocol family 2 [ 0.693177] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.693519] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.694032] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.694493] TCP: Hash tables configured (established 131072 bind 65536) [ 0.694498] TCP reno registered [ 0.694672] NET: Registered protocol family 1 [ 0.694816] checking if image is initramfs... it is [ 1.156075] Switched to high resolution mode on CPU 0 [ 1.448865] Freeing initrd memory: 7995k freed [ 1.449039] Simple Boot Flag value 0x87 read from CMOS RAM was invalid [ 1.449043] Simple Boot Flag at 0x7a set to 0x1 [ 1.449640] audit: initializing netlink socket (disabled) [ 1.449660] type=2000 audit(1229247155.448:1): initialized [ 1.454946] highmem bounce pool size: 64 pages [ 1.454954] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.457711] VFS: Disk quotas dquot_6.5.1 [ 1.457827] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.457952] msgmni has been set to 1761 [ 1.458106] io scheduler noop registered [ 1.458109] io scheduler anticipatory registered [ 1.458112] io scheduler deadline registered [ 1.458130] io scheduler cfq registered (default) [ 1.458234] pci 0000:01:00.0: Boot video device [ 1.458246] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 1.458669] isapnp: Scanning for PnP cards... [ 1.812394] isapnp: No Plug & Play device found [ 1.864716] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.864849] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.865784] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.868364] brd: module loaded [ 1.868453] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.868602] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1 [ 1.868606] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.869174] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.869580] mice: PS/2 mouse device common for all mice [ 1.869772] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.869795] rtc0: alarms up to one day, hpet irqs [ 1.869952] EISA: Probing bus 0 at eisa.0 [ 1.869988] EISA: Detected 0 cards. [ 1.869991] cpuidle: using governor ladder [ 1.869994] cpuidle: using governor menu [ 1.870646] TCP cubic registered [ 1.870682] Using IPI No-Shortcut mode [ 1.870981] registered taskstats version 1 [ 1.871132] Magic number: 4:519:525 [ 1.871260] rtc_cmos 00:05: setting system clock to 2008-12-14 09:32:37 UTC (1229247157) [ 1.871264] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.871267] EDD information not available. [ 1.871588] Freeing unused kernel memory: 424k freed [ 1.871649] Write protecting the kernel text: 2576k [ 1.871685] Write protecting the kernel read-only data: 936k [ 1.895891] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.952814] vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 10240k, total 65536k [ 1.952819] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 1.952822] vesafb: protected mode interface info at c000:f2f0 [ 1.952825] vesafb: pmi: set display start = c00cf326, set palette = c00cf390 [ 1.952828] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 1.952845] vesafb: scrolling: redraw [ 1.952849] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.953098] Console: switching to colour frame buffer device 160x64 [ 2.019771] fb0: VESA VGA frame buffer device [ 2.274164] fuse init (API version 7.9) [ 2.372019] processor ACPI0007:00: registered as cooling_device0 [ 3.008118] usbcore: registered new interface driver usbfs [ 3.008149] usbcore: registered new interface driver hub [ 3.008714] usbcore: registered new device driver usb [ 3.026398] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.026413] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.026417] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.026481] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.030407] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.030414] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 3.030429] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80800 [ 3.044148] USB Universal Host Controller Interface driver v3.0 [ 3.055888] No dock devices found. [ 3.092048] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.092246] usb usb1: configuration #1 chosen from 1 choice [ 3.092283] hub 1-0:1.0: USB hub found [ 3.092297] hub 1-0:1.0: 8 ports detected [ 3.128511] SCSI subsystem initialized [ 3.162171] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 3.162177] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.236847] libata version 3.00 loaded. [ 3.300343] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.300355] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.300359] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.300393] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.300425] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80 [ 3.300547] usb usb2: configuration #1 chosen from 1 choice [ 3.300583] hub 2-0:1.0: USB hub found [ 3.300593] hub 2-0:1.0: 2 ports detected [ 3.404374] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.404385] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.404390] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.404424] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.404456] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60 [ 3.404578] usb usb3: configuration #1 chosen from 1 choice [ 3.404613] hub 3-0:1.0: USB hub found [ 3.404623] hub 3-0:1.0: 2 ports detected [ 3.412036] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 3.612306] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.612319] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.612323] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.612364] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.612397] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 3.612523] usb usb4: configuration #1 chosen from 1 choice [ 3.612560] hub 4-0:1.0: USB hub found [ 3.612571] hub 4-0:1.0: 2 ports detected [ 3.627407] usb 1-3: configuration #1 chosen from 1 choice [ 3.792056] usb 1-8: new high speed USB device using ehci_hcd and address 4 [ 3.820369] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.820381] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.820386] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.820421] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.820448] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20 [ 3.820571] usb usb5: configuration #1 chosen from 1 choice [ 3.820613] hub 5-0:1.0: USB hub found [ 3.820623] hub 5-0:1.0: 2 ports detected [ 3.947358] usb 1-8: configuration #1 chosen from 1 choice [ 4.028700] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.028737] pata_acpi 0000:00:1f.1: setting latency timer to 64 [ 4.028752] pata_acpi 0000:00:1f.1: PCI INT A disabled [ 4.028787] pata_acpi 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.028807] pata_acpi 0000:00:1f.2: setting latency timer to 64 [ 4.028817] pata_acpi 0000:00:1f.2: PCI INT A disabled [ 4.028871] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.050931] e100 0000:02:08.0: PME# disabled [ 4.054542] e100: eth0: e100_probe: addr 0xfcffb000, irq 20, MAC addr 00:07:e9:52:0e:e0 [ 4.054582] ohci1394 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.104333] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fcffa800-fcffafff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.104782] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 4.114574] ata_piix 0000:00:1f.1: version 2.12 [ 4.114587] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.114633] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 4.116112] scsi0 : ata_piix [ 4.116632] scsi1 : ata_piix [ 4.116692] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 4.116696] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 4.283487] usb 4-1: configuration #1 chosen from 1 choice [ 4.286650] usbcore: registered new interface driver libusual [ 4.295974] Initializing USB Mass Storage driver... [ 4.297161] scsi2 : SCSI emulation for USB Mass Storage devices [ 4.297290] usb-storage: device found at 2 [ 4.297293] usb-storage: waiting for device to settle before scanning [ 4.298105] scsi3 : SCSI emulation for USB Mass Storage devices [ 4.298550] usbcore: registered new interface driver usb-storage [ 4.298555] USB Mass Storage support registered. [ 4.298695] usb-storage: device found at 4 [ 4.298698] usb-storage: waiting for device to settle before scanning [ 4.304306] ata1.00: HPA unlocked: 156250000 -> 156301488, native 156301488 [ 4.304314] ata1.00: ATA-5: WDC WD800BB-75CAA0, 16.06V16, max UDMA/100 [ 4.304318] ata1.00: 156301488 sectors, multi 8: LBA [ 4.312698] ata1.01: ATA-7: WDC WD1600AABB-00PUA0, 00.07H00, max UDMA/100 [ 4.312703] ata1.01: 312581808 sectors, multi 8: LBA48 [ 4.325386] usbcore: registered new interface driver hiddev [ 4.329335] ata1.00: configured for UDMA/100 [ 4.337077] ata1.01: configured for UDMA/100 [ 4.338619] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input2 [ 4.348669] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-1 [ 4.348696] usbcore: registered new interface driver usbhid [ 4.348701] usbhid: v2.6:USB HID core driver [ 4.612666] ata2.00: ATAPI: SAMSUNG DVD-ROM SD-616T, F310, max UDMA/33 [ 4.612692] ata2.01: ATAPI: LITE-ON DVDRW SOHW-1653S, CS07, max UDMA/66 [ 4.620357] ata2.00: configured for UDMA/33 [ 4.636220] ata2.01: configured for UDMA/66 [ 4.636348] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-75CA 16.0 PQ: 0 ANSI: 5 [ 4.636550] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.637270] scsi 0:0:1:0: Direct-Access ATA WDC WD1600AABB-0 00.0 PQ: 0 ANSI: 5 [ 4.637454] scsi 0:0:1:0: Attached scsi generic sg1 type 0 [ 4.638413] scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616T F310 PQ: 0 ANSI: 5 [ 4.638595] scsi 1:0:0:0: Attached scsi generic sg2 type 5 [ 4.639745] scsi 1:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1653S CS07 PQ: 0 ANSI: 5 [ 4.639929] scsi 1:0:1:0: Attached scsi generic sg3 type 5 [ 4.639958] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.639964] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 4.640022] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 4.640687] scsi4 : ata_piix [ 4.641083] scsi5 : ata_piix [ 4.641148] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18 [ 4.641152] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18 [ 5.376049] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... [ 6.328053] ieee1394: Error parsing configrom for node 0-00:1023 [ 6.328978] ieee1394: Host added: ID:BUS[0-01:1023] GUID[00309500a0031ecb] [ 8.372146] Driver 'sd' needs updating - please use bus_type methods [ 8.372608] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 8.372632] sd 0:0:0:0: [sda] Write Protect is off [ 8.372635] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.372671] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.372760] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 8.372780] sd 0:0:0:0: [sda] Write Protect is off [ 8.372784] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.372820] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.372825] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 8.389159] sda1 sda2 [ 8.389313] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.389428] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 8.389452] sd 0:0:1:0: [sdb] Write Protect is off [ 8.389456] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 8.389494] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.389572] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 8.389594] sd 0:0:1:0: [sdb] Write Protect is off [ 8.389597] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 8.389635] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.389640] sdb: sdb1 sdb2 < sdb5 > [ 8.424469] sd 0:0:1:0: [sdb] Attached SCSI disk [ 8.444413] sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray [ 8.444419] Uniform CD-ROM driver Revision: 3.20 [ 8.444542] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 8.448409] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 8.448529] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 8.942756] PM: Starting manual resume from disk [ 8.942762] PM: Resume from partition 8:21 [ 8.942764] PM: Checking hibernation image. [ 8.942988] PM: Resume from disk failed. [ 8.991399] kjournald starting. Commit interval 5 seconds [ 8.991415] EXT3-fs: mounted filesystem with ordered data mode. [ 9.296236] usb-storage: device scan complete [ 9.297463] usb-storage: device scan complete [ 9.298596] scsi 3:0:0:0: Direct-Access SanDisk Sansa Clip 2GB v01. PQ: 0 ANSI: 0 [ 9.331599] scsi 2:0:0:0: Direct-Access ST332082 0A 3.AA PQ: 0 ANSI: 0 [ 9.332823] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) [ 9.333696] sd 2:0:0:0: [sdc] Write Protect is off [ 9.333701] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 9.333705] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 9.334570] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) [ 9.335320] sd 2:0:0:0: [sdc] Write Protect is off [ 9.335324] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 9.335326] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 9.335331] sdc: sdc1 [ 14.455896] sd 2:0:0:0: [sdc] Attached SCSI disk [ 14.456050] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 14.457230] sd 3:0:0:0: [sdd] 3992576 512-byte hardware sectors (2044 MB) [ 14.457853] sd 3:0:0:0: [sdd] Write Protect is off [ 14.457857] sd 3:0:0:0: [sdd] Mode Sense: 04 00 00 00 [ 14.457860] sd 3:0:0:0: [sdd] Assuming drive cache: write through [ 14.459602] sd 3:0:0:0: [sdd] 3992576 512-byte hardware sectors (2044 MB) [ 14.460227] sd 3:0:0:0: [sdd] Write Protect is off [ 14.460275] sd 3:0:0:0: [sdd] Mode Sense: 04 00 00 00 [ 14.460313] sd 3:0:0:0: [sdd] Assuming drive cache: write through [ 14.460352] sdd: [ 14.462669] sd 3:0:0:0: [sdd] Attached SCSI removable disk [ 14.462788] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 16.007538] udevd version 124 started [ 16.764413] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.808239] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.861000] EDAC MC: Ver: 2.1.0 Nov 21 2008 [ 16.924193] EDAC i82875p: i82875p init one [ 16.924225] PCI: 0000:00:06.0 reg 10 32bit mmio: [fecf0000, fecf0fff] [ 16.933049] pci 0000:00:06.0: device not available because of BAR 0 [0xfecf0000-0xfecf0fff] collisions [ 16.933056] EDAC i82875p: i82875p_setup_overfl_dev(): Failed to enable overflow device [ 16.972175] intel_rng: Firmware space is locked read-only. If you can't or [ 16.972178] intel_rng: don't want to disable this in firmware setup, and if [ 16.972180] intel_rng: you are certain that your system has a functional [ 16.972182] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 17.124168] Linux agpgart interface v0.103 [ 17.235259] agpgart-intel 0000:00:00.0: Intel i875 Chipset [ 17.240355] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 17.240516] iTCO_vendor_support: vendor-support=0 [ 17.300170] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 17.300286] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860) [ 17.300427] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.400270] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 17.412037] ACPI: Power Button (FF) [PWRF] [ 17.412171] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 17.424030] ACPI: Power Button (CM) [VBTN] [ 18.196747] parport_pc 00:09: reported by Plug and Play ACPI [ 18.196799] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 19.040225] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 19.040247] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 19.460025] intel8x0_measure_ac97_clock: measured 52383 usecs [ 19.460029] intel8x0: clocking to 48000 [ 19.853334] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 20.362896] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 22.964442] lp0: using parport0 (interrupt-driven). [ 23.175894] Adding 3028212k swap on /dev/sdb5. Priority:-1 extents:1 across:3028212k [ 23.748915] EXT3 FS on sdb1, internal journal [ 24.822306] type=1505 audit(1229243579.987:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4084 [ 25.030163] type=1505 audit(1229243580.195:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4089 [ 25.030390] type=1505 audit(1229243580.195:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4089 [ 25.194023] ip_tables: (C) 2000-2006 Netfilter Core Team [ 25.940409] ACPI: WMI: Mapper loaded [ 27.224157] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 27.362200] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 27.362207] apm: overridden by ACPI. [ 27.531311] ppdev: user-space parallel port driver [ 30.407874] Bluetooth: Core ver 2.13 [ 30.409966] NET: Registered protocol family 31 [ 30.409973] Bluetooth: HCI device and connection manager initialized [ 30.409977] Bluetooth: HCI socket layer initialized [ 30.437656] Bluetooth: L2CAP ver 2.11 [ 30.437663] Bluetooth: L2CAP socket layer initialized [ 30.454984] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.454991] Bluetooth: BNEP filters: protocol multicast [ 30.492319] Bridge firewalling registered [ 30.493191] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 30.520897] Bluetooth: SCO (Voice Link) ver 0.6 [ 30.520907] Bluetooth: SCO socket layer initialized [ 30.543200] Bluetooth: RFCOMM socket layer initialized [ 30.544070] Bluetooth: RFCOMM TTY layer initialized [ 30.544077] Bluetooth: RFCOMM ver 1.10 [ 33.016452] nvidia: module license 'NVIDIA' taints kernel. [ 33.289126] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 33.290414] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.09 Mon Oct 27 14:23:30 PST 2008 [ 33.369754] agpgart-intel 0000:00:00.0: AGP 3.0 bridge [ 33.369779] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode [ 33.369818] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 34.692124] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 34.832549] NET: Registered protocol family 17 [ 381.152293] NET: Registered protocol family 10 [ 381.154490] lo: Disabled Privacy Extensions [ 391.228015] eth0: no IPv6 routers present [ 396.832486] ppdev0: registered pardevice [ 396.880241] ppdev0: unregistered pardevice [ 396.945650] ppdev0: registered pardevice [ 396.998251] ppdev0: unregistered pardevice [ 397.076145] ppdev0: registered pardevice [ 397.124063] ppdev0: unregistered pardevice [ 3593.321635] nautilus[7115]: segfault at cf000018 ip b7723c46 sp bff3fc20 error 5 in libgconf-2.so.4.1.5[b7703000+2e000]