[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 (Ubuntu 2.6.32-24.39-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=4b4d57e4-3ca8-4799-b065-4d2cadb8ff4d ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable) [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back [ 0.000000] 6 base 000220000000 mask FFFFF0000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfdf0000 (usable) [ 0.000000] modified: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS) [ 0.000000] modified: 00000000cfdf1000 - 00000000cfe00000 (ACPI data) [ 0.000000] modified: 00000000cfe00000 - 00000000cff00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfdf0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfc00000 page 2M [ 0.000000] 00cfc00000 - 00cfdf0000 page 4k [ 0.000000] kernel direct mapping tables up to cfdf0000 @ 8000-b000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ a000-c000 [ 0.000000] RAMDISK: 377fc000 - 37fefcd1 [ 0.000000] ACPI: RSDP 00000000000f60f0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfdf1000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfdf1040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfdf10c0 07BE3 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfdf0000 00040 [ 0.000000] ACPI: SSDT 00000000cfdf8d80 00EDC (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfdf9c80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfdf9cc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS 00000000cfdf9d00 00034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: APIC 00000000cfdf8cc0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff] [ 0.000000] bootmap [0000000000010000 - 0000000000055fff] pages 46 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [00377fc000 - 0037fefcd1] RAMDISK ==> [00377fc000 - 0037fefcd1] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a300fe] BRK ==> [0001a30000 - 0001a300fe] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f46e0] f46e0 [ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfdf0 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096522 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833064 pages, LIFO batch:31 [ 0.000000] Normal zone: 17024 pages used for memmap [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf1000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf1000 - 00000000cfe00000 [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u262144 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065060 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=4b4d57e4-3ca8-4799-b065-4d2cadb8ff4d ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 8183948k/9175040k available (5422k kernel code, 788952k absent, 202140k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:472 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3616.287 MHz processor. [ 0.010004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6428.94 BogoMIPS (lpj=32144730) [ 0.010018] Security Framework initialized [ 0.010029] AppArmor: AppArmor initialized [ 0.010376] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.021642] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.022409] Mount-cache hash table entries: 256 [ 0.022484] Initializing cgroup subsys ns [ 0.022486] Initializing cgroup subsys cpuacct [ 0.022489] Initializing cgroup subsys memory [ 0.022493] Initializing cgroup subsys devices [ 0.022494] Initializing cgroup subsys freezer [ 0.022495] Initializing cgroup subsys net_cls [ 0.022506] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.022507] CPU: L2 Cache: 512K (64 bytes/line) [ 0.022509] CPU 0/0x0 -> Node 0 [ 0.022510] tseg: 00cff00000 [ 0.022511] CPU: Physical Processor ID: 0 [ 0.022512] CPU: Processor Core ID: 0 [ 0.022514] mce: CPU supports 6 MCE banks [ 0.022520] using C1E aware idle routine [ 0.022521] Performance Events: AMD PMU driver. [ 0.022523] ... version: 0 [ 0.022524] ... bit width: 48 [ 0.022525] ... generic registers: 4 [ 0.022526] ... value mask: 0000ffffffffffff [ 0.022527] ... max period: 00007fffffffffff [ 0.022528] ... fixed-purpose events: 0 [ 0.022529] ... event mask: 000000000000000f [ 0.023454] ACPI: Core revision 20090903 [ 0.040018] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040024] ftrace: allocating 22527 entries in 89 pages [ 0.043750] Setting APIC routing to flat [ 0.043976] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.144521] CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00 [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.300091] CPU1: AMD Phenom(tm) II X6 1090T Processor stepping 00 [ 0.300095] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.310015] System has AMD C1E enabled [ 0.310021] Switch to broadcast mode on CPU1 [ 0.310038] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.020000] Initializing CPU#2 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 2/0x2 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 2 [ 0.470041] CPU2: AMD Phenom(tm) II X6 1090T Processor stepping 00 [ 0.470045] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.480015] Switch to broadcast mode on CPU2 [ 0.480043] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.020000] Initializing CPU#3 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 3/0x3 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 4 [ 0.640084] CPU3: AMD Phenom(tm) II X6 1090T Processor stepping 00 [ 0.640088] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.650019] Switch to broadcast mode on CPU3 [ 0.650051] Booting processor 4 APIC 0x4 ip 0x6000 [ 0.020000] Initializing CPU#4 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 4/0x4 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 3 [ 0.810014] CPU4: AMD Phenom(tm) II X6 1090T Processor stepping 00 [ 0.810017] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.820027] Switch to broadcast mode on CPU4 [ 0.820058] Booting processor 5 APIC 0x5 ip 0x6000 [ 0.020000] Initializing CPU#5 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 5/0x5 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 5 [ 0.980098] CPU5: AMD Phenom(tm) II X6 1090T Processor stepping 00 [ 0.980101] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.990052] Brought up 6 CPUs [ 0.990054] Total of 6 processors activated (38576.44 BogoMIPS). [ 0.990051] Switch to broadcast mode on CPU5 [ 0.992584] CPU0 attaching sched-domain: [ 0.992585] domain 0: span 0-5 level MC [ 0.992587] groups: 0 1 2 3 4 5 [ 0.992590] CPU1 attaching sched-domain: [ 0.992591] domain 0: span 0-5 level MC [ 0.992593] groups: 1 2 3 4 5 0 [ 0.992596] CPU2 attaching sched-domain: [ 0.992597] domain 0: span 0-5 level MC [ 0.992598] groups: 2 3 4 5 0 1 [ 0.992601] CPU3 attaching sched-domain: [ 0.992602] domain 0: span 0-5 level MC [ 0.992603] groups: 3 4 5 0 1 2 [ 0.992605] CPU4 attaching sched-domain: [ 0.992606] domain 0: span 0-5 level MC [ 0.992607] groups: 4 5 0 1 2 3 [ 0.992610] CPU5 attaching sched-domain: [ 0.992611] domain 0: span 0-5 level MC [ 0.992612] groups: 5 0 1 2 3 4 [ 0.992688] Switch to broadcast mode on CPU0 [ 0.992688] devtmpfs: initialized [ 0.992688] regulator: core version 0.5 [ 0.992688] Time: 14:54:46 Date: 08/15/10 [ 0.992688] NET: Registered protocol family 16 [ 0.992688] node 0 link 0: io port [6000, ffff] [ 0.992688] Trying to unpack rootfs image as initramfs... [ 0.992688] TOM: 00000000d0000000 aka 3328M [ 0.992688] Fam 10h mmconf [e0000000, e00fffff] [ 0.992688] node 0 link 0: mmio [a0000, bffff] [ 0.992688] node 0 link 0: mmio [d0000000, dfffffff] [ 0.992688] node 0 link 0: mmio [f0000000, ffffffff] [ 0.992688] node 0 link 0: mmio [e0000000, e09fffff] ==> [e0100000, e09fffff] [ 0.992688] TOM2: 0000000230000000 aka 8960M [ 0.992688] bus: [00,09] on node 0 link 0 [ 0.992688] bus: 00 index 0 io port: [0, ffff] [ 0.992688] bus: 00 index 1 mmio: [a0000, bffff] [ 0.992688] bus: 00 index 2 mmio: [d0000000, dfffffff] [ 0.992688] bus: 00 index 3 mmio: [e0a00000, ffffffff] [ 0.992688] bus: 00 index 4 mmio: [e0100000, e09fffff] [ 0.992688] bus: 00 index 5 mmio: [230000000, fcffffffff] [ 0.992688] ACPI: bus type pci registered [ 0.992688] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.992688] PCI: MCFG area at e0000000 reserved in E820 [ 0.995565] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.995566] PCI: Using configuration type 1 for base access [ 1.000020] bio: create slab at 0 [ 1.000295] ACPI: EC: Look up EC in DSDT [ 1.002132] ACPI Warning: Package List length (0x1) larger than NumElements count (0x0), truncated [ 1.002134] (20090903/dsobject-515) [ 1.002138] ACPI Warning: Package List length (0x1) larger than NumElements count (0x0), truncated [ 1.002140] (20090903/dsobject-515) [ 1.002169] ACPI Warning: Package List length (0x1) larger than NumElements count (0x0), truncated [ 1.002171] (20090903/dsobject-515) [ 1.002174] ACPI Warning: Package List length (0x1) larger than NumElements count (0x0), truncated [ 1.002176] (20090903/dsobject-515) [ 1.006798] ACPI: Interpreter enabled [ 1.006804] ACPI: (supports S0 S3 S4 S5) [ 1.006818] ACPI: Using IOAPIC for interrupt routing [ 1.010936] ACPI: No dock devices found. [ 1.011011] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.011041] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 1.011088] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 1.011090] pci 0000:00:02.0: PME# disabled [ 1.011113] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 1.011115] pci 0000:00:04.0: PME# disabled [ 1.011145] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 1.011146] pci 0000:00:05.0: PME# disabled [ 1.011167] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 1.011169] pci 0000:00:06.0: PME# disabled [ 1.011190] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 1.011191] pci 0000:00:07.0: PME# disabled [ 1.011213] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.011214] pci 0000:00:09.0: PME# disabled [ 1.011235] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.011237] pci 0000:00:0a.0: PME# disabled [ 1.011270] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] [ 1.011274] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] [ 1.011278] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] [ 1.011282] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] [ 1.011285] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] [ 1.011289] pci 0000:00:11.0: reg 24 32bit mmio: [0xfdfff000-0xfdfff3ff] [ 1.011300] pci 0000:00:11.0: set SATA to AHCI mode [ 1.011334] pci 0000:00:12.0: reg 10 32bit mmio: [0xfdffe000-0xfdffefff] [ 1.011376] pci 0000:00:12.2: reg 10 32bit mmio: [0xfdffd000-0xfdffd0ff] [ 1.011406] pci 0000:00:12.2: supports D1 D2 [ 1.011407] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.011410] pci 0000:00:12.2: PME# disabled [ 1.011428] pci 0000:00:13.0: reg 10 32bit mmio: [0xfdffc000-0xfdffcfff] [ 1.011470] pci 0000:00:13.2: reg 10 32bit mmio: [0xfdffb000-0xfdffb0ff] [ 1.011500] pci 0000:00:13.2: supports D1 D2 [ 1.011501] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.011504] pci 0000:00:13.2: PME# disabled [ 1.011551] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 1.011554] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 1.011558] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 1.011562] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 1.011566] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] [ 1.011596] pci 0000:00:14.2: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff] [ 1.011621] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 1.011623] pci 0000:00:14.2: PME# disabled [ 1.011685] pci 0000:00:14.5: reg 10 32bit mmio: [0xfdffa000-0xfdffafff] [ 1.011740] pci 0000:00:15.0: supports D1 D2 [ 1.011763] pci 0000:00:16.0: reg 10 32bit mmio: [0xfdff9000-0xfdff9fff] [ 1.011806] pci 0000:00:16.2: reg 10 32bit mmio: [0xfdff8000-0xfdff80ff] [ 1.011836] pci 0000:00:16.2: supports D1 D2 [ 1.011837] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 1.011839] pci 0000:00:16.2: PME# disabled [ 1.011910] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 1.011916] pci 0000:01:00.0: reg 18 64bit mmio: [0xfdac0000-0xfdadffff] [ 1.011919] pci 0000:01:00.0: reg 20 io port: [0xde00-0xdeff] [ 1.011925] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 1.011937] pci 0000:01:00.0: supports D1 D2 [ 1.011960] pci 0000:01:00.1: reg 10 64bit mmio: [0xfdafc000-0xfdafffff] [ 1.011983] pci 0000:01:00.1: supports D1 D2 [ 1.012015] pci 0000:00:02.0: bridge io port: [0xd000-0xdfff] [ 1.012017] pci 0000:00:02.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 1.012019] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 1.012048] pci 0000:02:00.0: reg 10 64bit mmio: [0xfd9fe000-0xfd9fffff] [ 1.012081] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.012084] pci 0000:02:00.0: PME# disabled [ 1.012118] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff] [ 1.012120] pci 0000:00:04.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff] [ 1.012122] pci 0000:00:04.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff] [ 1.012148] pci 0000:00:05.0: bridge io port: [0xb000-0xbfff] [ 1.012150] pci 0000:00:05.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff] [ 1.012152] pci 0000:00:05.0: bridge 64bit mmio pref: [0xfd600000-0xfd6fffff] [ 1.012177] pci 0000:00:06.0: bridge io port: [0xa000-0xafff] [ 1.012179] pci 0000:00:06.0: bridge 32bit mmio: [0xfd500000-0xfd5fffff] [ 1.012181] pci 0000:00:06.0: bridge 64bit mmio pref: [0xfd200000-0xfd2fffff] [ 1.012206] pci 0000:05:00.0: reg 10 io port: [0x9e00-0x9eff] [ 1.012217] pci 0000:05:00.0: reg 18 64bit mmio pref: [0xfceff000-0xfcefffff] [ 1.012225] pci 0000:05:00.0: reg 20 64bit mmio pref: [0xfcef8000-0xfcefbfff] [ 1.012229] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 1.012251] pci 0000:05:00.0: supports D1 D2 [ 1.012252] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.012255] pci 0000:05:00.0: PME# disabled [ 1.012293] pci 0000:00:07.0: bridge io port: [0x9000-0x9fff] [ 1.012294] pci 0000:00:07.0: bridge 32bit mmio: [0xfcf00000-0xfcffffff] [ 1.012296] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfce00000-0xfcefffff] [ 1.012321] pci 0000:06:00.0: reg 10 io port: [0x8e00-0x8eff] [ 1.012332] pci 0000:06:00.0: reg 18 64bit mmio pref: [0xfddff000-0xfddfffff] [ 1.012340] pci 0000:06:00.0: reg 20 64bit mmio pref: [0xfddf8000-0xfddfbfff] [ 1.012345] pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 1.012367] pci 0000:06:00.0: supports D1 D2 [ 1.012368] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.012370] pci 0000:06:00.0: PME# disabled [ 1.012408] pci 0000:00:09.0: bridge io port: [0x8000-0x8fff] [ 1.012409] pci 0000:00:09.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 1.012411] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] [ 1.012464] pci 0000:07:00.0: reg 24 32bit mmio: [0xfdcfe000-0xfdcfffff] [ 1.012487] pci 0000:07:00.0: PME# supported from D3hot [ 1.012490] pci 0000:07:00.0: PME# disabled [ 1.012523] pci 0000:07:00.1: reg 10 io port: [0xef00-0xef07] [ 1.012528] pci 0000:07:00.1: reg 14 io port: [0xee00-0xee03] [ 1.012533] pci 0000:07:00.1: reg 18 io port: [0xed00-0xed07] [ 1.012538] pci 0000:07:00.1: reg 1c io port: [0xec00-0xec03] [ 1.012544] pci 0000:07:00.1: reg 20 io port: [0xeb00-0xeb0f] [ 1.012602] pci 0000:00:0a.0: bridge io port: [0xe000-0xefff] [ 1.012603] pci 0000:00:0a.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 1.012605] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] [ 1.012648] pci 0000:08:0e.0: reg 10 32bit mmio: [0xfd4ff000-0xfd4ff7ff] [ 1.012653] pci 0000:08:0e.0: reg 14 32bit mmio: [0xfd4f8000-0xfd4fbfff] [ 1.012692] pci 0000:08:0e.0: supports D1 D2 [ 1.012693] pci 0000:08:0e.0: PME# supported from D0 D1 D2 D3hot [ 1.012696] pci 0000:08:0e.0: PME# disabled [ 1.012718] pci 0000:00:14.4: transparent bridge [ 1.012720] pci 0000:00:14.4: bridge io port: [0x7000-0x7fff] [ 1.012723] pci 0000:00:14.4: bridge 32bit mmio: [0xfd400000-0xfd4fffff] [ 1.012725] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfd300000-0xfd3fffff] [ 1.012793] pci 0000:09:00.0: reg 24 32bit mmio: [0xfd1fe000-0xfd1fffff] [ 1.012822] pci 0000:09:00.0: PME# supported from D3hot [ 1.012826] pci 0000:09:00.0: PME# disabled [ 1.012866] pci 0000:09:00.1: reg 10 io port: [0x6f00-0x6f07] [ 1.012873] pci 0000:09:00.1: reg 14 io port: [0x6e00-0x6e03] [ 1.012880] pci 0000:09:00.1: reg 18 io port: [0x6d00-0x6d07] [ 1.012886] pci 0000:09:00.1: reg 1c io port: [0x6c00-0x6c03] [ 1.012892] pci 0000:09:00.1: reg 20 io port: [0x6b00-0x6b0f] [ 1.012961] pci 0000:00:15.0: bridge io port: [0x6000-0x6fff] [ 1.012963] pci 0000:00:15.0: bridge 32bit mmio: [0xfd100000-0xfd1fffff] [ 1.012967] pci 0000:00:15.0: bridge 64bit mmio pref: [0xfd000000-0xfd0fffff] [ 1.012982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.013138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 1.013172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 1.013207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 1.013235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] [ 1.013261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] [ 1.013286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 1.013312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 1.013338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 1.013365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 1.032541] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 [ 1.032595] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 [ 1.032648] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 [ 1.032701] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 [ 1.032752] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 [ 1.032803] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 [ 1.032855] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 [ 1.032906] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 [ 1.032965] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.032968] vgaarb: loaded [ 1.033023] SCSI subsystem initialized [ 1.033060] libata version 3.00 loaded. [ 1.033060] usbcore: registered new interface driver usbfs [ 1.033060] usbcore: registered new interface driver hub [ 1.033060] usbcore: registered new device driver usb [ 1.033060] ACPI: WMI: Mapper loaded [ 1.033060] PCI: Using ACPI for IRQ routing [ 1.033060] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 1.033060] pci 0000:00:00.0: BAR 3: can't allocate resource [ 1.033060] NetLabel: Initializing [ 1.033060] NetLabel: domain hash size = 128 [ 1.033060] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.033060] NetLabel: unlabeled traffic allowed by default [ 1.033060] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.033060] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.033060] Switching to clocksource tsc [ 1.036576] AppArmor: AppArmor Filesystem Enabled [ 1.036576] pnp: PnP ACPI init [ 1.036576] ACPI: bus type pnp registered [ 1.036576] pnp 00:0b: mem resource (0xcf600-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 1.036576] pnp 00:0b: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 1.036576] pnp 00:0b: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 1.036576] pnp 00:0b: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 1.036576] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 1.036576] pnp 00:0b: mem resource (0x100000-0xcfdeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 1.036576] pnp: PnP ACPI: found 12 devices [ 1.036576] ACPI: ACPI bus type pnp unregistered [ 1.036576] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 1.036576] system 00:01: ioport range 0x220-0x225 has been reserved [ 1.036576] system 00:01: ioport range 0x290-0x294 has been reserved [ 1.036576] system 00:02: ioport range 0x900-0x91f has been reserved [ 1.036576] system 00:02: ioport range 0x228-0x22f has been reserved [ 1.036576] system 00:02: ioport range 0x40b-0x40b has been reserved [ 1.036576] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 1.036576] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 1.036576] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 1.036576] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 1.036576] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 1.036576] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 1.036576] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 1.036576] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 1.036576] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 1.036576] system 00:02: ioport range 0x800-0x8fe has been reserved [ 1.036576] system 00:02: ioport range 0xa10-0xa17 has been reserved [ 1.036576] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 1.036576] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 1.036576] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 1.036576] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 1.036576] system 00:0b: iomem range 0xcfdf0000-0xcfdfffff could not be reserved [ 1.036576] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 1.036576] system 00:0b: iomem range 0xcfe00000-0xcfefffff has been reserved [ 1.036576] system 00:0b: iomem range 0xcff00000-0xcfffffff could not be reserved [ 1.036576] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.036576] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 1.036576] system 00:0b: iomem range 0xfff80000-0xfffeffff has been reserved [ 1.037323] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 1.037325] pci 0000:00:02.0: IO window: 0xd000-0xdfff [ 1.037327] pci 0000:00:02.0: MEM window: 0xfda00000-0xfdafffff [ 1.037329] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 1.037331] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 1.037333] pci 0000:00:04.0: IO window: 0xc000-0xcfff [ 1.037334] pci 0000:00:04.0: MEM window: 0xfd900000-0xfd9fffff [ 1.037336] pci 0000:00:04.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff [ 1.037338] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03 [ 1.037340] pci 0000:00:05.0: IO window: 0xb000-0xbfff [ 1.037341] pci 0000:00:05.0: MEM window: 0xfd700000-0xfd7fffff [ 1.037343] pci 0000:00:05.0: PREFETCH window: 0x000000fd600000-0x000000fd6fffff [ 1.037345] pci 0000:00:06.0: PCI bridge, secondary bus 0000:04 [ 1.037346] pci 0000:00:06.0: IO window: 0xa000-0xafff [ 1.037348] pci 0000:00:06.0: MEM window: 0xfd500000-0xfd5fffff [ 1.037350] pci 0000:00:06.0: PREFETCH window: 0x000000fd200000-0x000000fd2fffff [ 1.037352] pci 0000:00:07.0: PCI bridge, secondary bus 0000:05 [ 1.037354] pci 0000:00:07.0: IO window: 0x9000-0x9fff [ 1.037355] pci 0000:00:07.0: MEM window: 0xfcf00000-0xfcffffff [ 1.037357] pci 0000:00:07.0: PREFETCH window: 0x000000fce00000-0x000000fcefffff [ 1.037359] pci 0000:00:09.0: PCI bridge, secondary bus 0000:06 [ 1.037361] pci 0000:00:09.0: IO window: 0x8000-0x8fff [ 1.037363] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff [ 1.037364] pci 0000:00:09.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff [ 1.037367] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07 [ 1.037368] pci 0000:00:0a.0: IO window: 0xe000-0xefff [ 1.037370] pci 0000:00:0a.0: MEM window: 0xfdc00000-0xfdcfffff [ 1.037371] pci 0000:00:0a.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 1.037374] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08 [ 1.037375] pci 0000:00:14.4: IO window: 0x7000-0x7fff [ 1.037378] pci 0000:00:14.4: MEM window: 0xfd400000-0xfd4fffff [ 1.037381] pci 0000:00:14.4: PREFETCH window: 0xfd300000-0xfd3fffff [ 1.037385] pci 0000:00:15.0: PCI bridge, secondary bus 0000:09 [ 1.037386] pci 0000:00:15.0: IO window: 0x6000-0x6fff [ 1.037389] pci 0000:00:15.0: MEM window: 0xfd100000-0xfd1fffff [ 1.037391] pci 0000:00:15.0: PREFETCH window: 0x000000fd000000-0x000000fd0fffff [ 1.037398] alloc irq_desc for 18 on node 0 [ 1.037399] alloc kstat_irqs on node 0 [ 1.037402] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.037404] pci 0000:00:02.0: setting latency timer to 64 [ 1.037407] alloc irq_desc for 16 on node 0 [ 1.037407] alloc kstat_irqs on node 0 [ 1.037409] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.037411] pci 0000:00:04.0: setting latency timer to 64 [ 1.037414] alloc irq_desc for 17 on node 0 [ 1.037414] alloc kstat_irqs on node 0 [ 1.037416] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.037418] pci 0000:00:05.0: setting latency timer to 64 [ 1.037421] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.037423] pci 0000:00:06.0: setting latency timer to 64 [ 1.037425] alloc irq_desc for 19 on node 0 [ 1.037426] alloc kstat_irqs on node 0 [ 1.037428] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.037429] pci 0000:00:07.0: setting latency timer to 64 [ 1.037432] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.037434] pci 0000:00:09.0: setting latency timer to 64 [ 1.037436] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.037438] pci 0000:00:0a.0: setting latency timer to 64 [ 1.037445] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.037447] pci 0000:00:15.0: setting latency timer to 64 [ 1.037450] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.037451] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.037452] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 1.037454] pci_bus 0000:01: resource 1 mem: [0xfda00000-0xfdafffff] [ 1.037455] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 1.037456] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 1.037457] pci_bus 0000:02: resource 1 mem: [0xfd900000-0xfd9fffff] [ 1.037458] pci_bus 0000:02: resource 2 pref mem [0xfd800000-0xfd8fffff] [ 1.037460] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] [ 1.037461] pci_bus 0000:03: resource 1 mem: [0xfd700000-0xfd7fffff] [ 1.037462] pci_bus 0000:03: resource 2 pref mem [0xfd600000-0xfd6fffff] [ 1.037463] pci_bus 0000:04: resource 0 io: [0xa000-0xafff] [ 1.037464] pci_bus 0000:04: resource 1 mem: [0xfd500000-0xfd5fffff] [ 1.037466] pci_bus 0000:04: resource 2 pref mem [0xfd200000-0xfd2fffff] [ 1.037467] pci_bus 0000:05: resource 0 io: [0x9000-0x9fff] [ 1.037468] pci_bus 0000:05: resource 1 mem: [0xfcf00000-0xfcffffff] [ 1.037469] pci_bus 0000:05: resource 2 pref mem [0xfce00000-0xfcefffff] [ 1.037471] pci_bus 0000:06: resource 0 io: [0x8000-0x8fff] [ 1.037472] pci_bus 0000:06: resource 1 mem: [0xfde00000-0xfdefffff] [ 1.037473] pci_bus 0000:06: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 1.037474] pci_bus 0000:07: resource 0 io: [0xe000-0xefff] [ 1.037475] pci_bus 0000:07: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 1.037476] pci_bus 0000:07: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 1.037478] pci_bus 0000:08: resource 0 io: [0x7000-0x7fff] [ 1.037479] pci_bus 0000:08: resource 1 mem: [0xfd400000-0xfd4fffff] [ 1.037480] pci_bus 0000:08: resource 2 pref mem [0xfd300000-0xfd3fffff] [ 1.037481] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 1.037483] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.037484] pci_bus 0000:09: resource 0 io: [0x6000-0x6fff] [ 1.037485] pci_bus 0000:09: resource 1 mem: [0xfd100000-0xfd1fffff] [ 1.037486] pci_bus 0000:09: resource 2 pref mem [0xfd000000-0xfd0fffff] [ 1.037507] NET: Registered protocol family 2 [ 1.037629] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.038415] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.040930] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.041153] TCP: Hash tables configured (established 524288 bind 65536) [ 1.041155] TCP reno registered [ 1.041229] NET: Registered protocol family 1 [ 1.100833] Freeing initrd memory: 8143k freed [ 1.130127] pci 0000:01:00.0: Boot video device [ 1.130309] PCI-DMA: Disabling AGP. [ 1.130376] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 1.130377] PCI-DMA: using GART IOMMU. [ 1.130379] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.131962] Scanning for low memory corruption every 60 seconds [ 1.132058] audit: initializing netlink socket (disabled) [ 1.132065] type=2000 audit(1281884086.123:1): initialized [ 1.137555] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.138429] VFS: Disk quotas dquot_6.5.2 [ 1.138458] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.138840] fuse init (API version 7.13) [ 1.138877] msgmni has been set to 16000 [ 1.139124] alg: No test for stdrng (krng) [ 1.139158] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.139160] io scheduler noop registered [ 1.139161] io scheduler anticipatory registered [ 1.139162] io scheduler deadline registered [ 1.139180] io scheduler cfq registered (default) [ 1.139294] alloc irq_desc for 24 on node 0 [ 1.139295] alloc kstat_irqs on node 0 [ 1.139300] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 1.139303] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.139373] alloc irq_desc for 25 on node 0 [ 1.139374] alloc kstat_irqs on node 0 [ 1.139377] pcieport 0000:00:04.0: irq 25 for MSI/MSI-X [ 1.139380] pcieport 0000:00:04.0: setting latency timer to 64 [ 1.139449] alloc irq_desc for 26 on node 0 [ 1.139449] alloc kstat_irqs on node 0 [ 1.139452] pcieport 0000:00:05.0: irq 26 for MSI/MSI-X [ 1.139455] pcieport 0000:00:05.0: setting latency timer to 64 [ 1.139511] alloc irq_desc for 27 on node 0 [ 1.139511] alloc kstat_irqs on node 0 [ 1.139514] pcieport 0000:00:06.0: irq 27 for MSI/MSI-X [ 1.139516] pcieport 0000:00:06.0: setting latency timer to 64 [ 1.139575] alloc irq_desc for 28 on node 0 [ 1.139576] alloc kstat_irqs on node 0 [ 1.139579] pcieport 0000:00:07.0: irq 28 for MSI/MSI-X [ 1.139581] pcieport 0000:00:07.0: setting latency timer to 64 [ 1.139635] alloc irq_desc for 29 on node 0 [ 1.139636] alloc kstat_irqs on node 0 [ 1.139638] pcieport 0000:00:09.0: irq 29 for MSI/MSI-X [ 1.139641] pcieport 0000:00:09.0: setting latency timer to 64 [ 1.139696] alloc irq_desc for 30 on node 0 [ 1.139697] alloc kstat_irqs on node 0 [ 1.139699] pcieport 0000:00:0a.0: irq 30 for MSI/MSI-X [ 1.139702] pcieport 0000:00:0a.0: setting latency timer to 64 [ 1.139776] alloc irq_desc for 31 on node 0 [ 1.139777] alloc kstat_irqs on node 0 [ 1.139780] pcieport 0000:00:15.0: irq 31 for MSI/MSI-X [ 1.139785] pcieport 0000:00:15.0: setting latency timer to 64 [ 1.139826] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.139856] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.139904] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.139905] ACPI: Power Button [PWRB] [ 1.139927] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.139929] ACPI: Power Button [PWRF] [ 1.140162] processor LNXCPU:00: registered as cooling_device0 [ 1.140195] processor LNXCPU:01: registered as cooling_device1 [ 1.140227] processor LNXCPU:02: registered as cooling_device2 [ 1.140261] processor LNXCPU:03: registered as cooling_device3 [ 1.140292] processor LNXCPU:04: registered as cooling_device4 [ 1.140338] processor LNXCPU:05: registered as cooling_device5 [ 1.142153] Linux agpgart interface v0.103 [ 1.142171] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.142245] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.142408] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.142853] brd: module loaded [ 1.143051] loop: module loaded [ 1.143087] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.143579] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.143631] pata_acpi 0000:07:00.1: enabling device (0000 -> 0001) [ 1.143635] pata_acpi 0000:07:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.143647] pata_acpi 0000:07:00.1: setting latency timer to 64 [ 1.143653] pata_acpi 0000:07:00.1: PCI INT B disabled [ 1.143681] pata_acpi 0000:09:00.1: enabling device (0000 -> 0001) [ 1.143684] pata_acpi 0000:09:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.143696] pata_acpi 0000:09:00.1: setting latency timer to 64 [ 1.143703] pata_acpi 0000:09:00.1: PCI INT B disabled [ 1.143880] Fixed MDIO Bus: probed [ 1.143897] PPP generic driver version 2.4.2 [ 1.143912] tun: Universal TUN/TAP device driver, 1.6 [ 1.143913] tun: (C) 1999-2004 Max Krasnyansky [ 1.143949] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.144008] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.144068] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.144084] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.144104] ehci_hcd 0000:00:12.2: debug port 1 [ 1.144117] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000 [ 1.170069] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.170125] usb usb1: configuration #1 chosen from 1 choice [ 1.170140] hub 1-0:1.0: USB hub found [ 1.170144] hub 1-0:1.0: 5 ports detected [ 1.170224] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.170233] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.170249] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.170267] ehci_hcd 0000:00:13.2: debug port 1 [ 1.170275] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000 [ 1.190070] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.190115] usb usb2: configuration #1 chosen from 1 choice [ 1.190129] hub 2-0:1.0: USB hub found [ 1.190133] hub 2-0:1.0: 5 ports detected [ 1.190220] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.190228] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 1.190243] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.190259] ehci_hcd 0000:00:16.2: debug port 1 [ 1.190267] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000 [ 1.210063] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.210112] usb usb3: configuration #1 chosen from 1 choice [ 1.210125] hub 3-0:1.0: USB hub found [ 1.210128] hub 3-0:1.0: 4 ports detected [ 1.210160] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.210221] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.210229] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.210244] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.210259] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000 [ 1.273689] usb usb4: configuration #1 chosen from 1 choice [ 1.273700] hub 4-0:1.0: USB hub found [ 1.273705] hub 4-0:1.0: 5 ports detected [ 1.274230] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.274238] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.274253] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.274264] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000 [ 1.333672] usb usb5: configuration #1 chosen from 1 choice [ 1.333683] hub 5-0:1.0: USB hub found [ 1.333688] hub 5-0:1.0: 5 ports detected [ 1.334210] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.334218] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.334239] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.334250] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000 [ 1.393671] usb usb6: configuration #1 chosen from 1 choice [ 1.393683] hub 6-0:1.0: USB hub found [ 1.393688] hub 6-0:1.0: 2 ports detected [ 1.394207] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.394215] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 1.394230] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.394241] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000 [ 1.453669] usb usb7: configuration #1 chosen from 1 choice [ 1.453681] hub 7-0:1.0: USB hub found [ 1.453686] hub 7-0:1.0: 4 ports detected [ 1.453716] uhci_hcd: USB Universal Host Controller Interface driver [ 1.453747] PNP: No PS/2 controller found. Probing ports directly. [ 1.487065] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 1.487066] If AUX port is really absent please use the 'i8042.noaux' option. [ 1.730132] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.730185] mice: PS/2 mouse device common for all mice [ 1.730235] rtc_cmos 00:04: RTC can wake from S4 [ 1.730253] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.730268] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.730333] device-mapper: uevent: version 1.0.3 [ 1.730431] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.730591] device-mapper: multipath: version 1.1.0 loaded [ 1.730593] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.730873] cpuidle: using governor ladder [ 1.730981] cpuidle: using governor menu [ 1.731180] TCP cubic registered [ 1.731234] NET: Registered protocol family 10 [ 1.731468] lo: Disabled Privacy Extensions [ 1.731595] NET: Registered protocol family 17 [ 1.731678] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor processors (6 cpu cores) (version 2.20.00) [ 1.731699] powernow-k8: 0 : pstate 0 (3200 MHz) [ 1.731700] powernow-k8: 1 : pstate 1 (2400 MHz) [ 1.731701] powernow-k8: 2 : pstate 2 (1600 MHz) [ 1.731702] powernow-k8: 3 : pstate 3 (800 MHz) [ 1.732255] PM: Resume from disk failed. [ 1.732261] registered taskstats version 1 [ 1.732627] Magic number: 6:514:940 [ 1.732723] rtc_cmos 00:04: setting system clock to 2010-08-15 14:54:47 UTC (1281884087) [ 1.732725] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.732726] EDD information not available. [ 1.732753] Freeing unused kernel memory: 880k freed [ 1.732891] Write protecting the kernel read-only data: 7696k [ 1.743865] udev: starting version 151 [ 1.760665] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.760665] r8169 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.760739] r8169 0000:05:00.0: setting latency timer to 64 [ 1.760739] alloc irq_desc for 32 on node 0 [ 1.760739] alloc kstat_irqs on node 0 [ 1.760739] r8169 0000:05:00.0: irq 32 for MSI/MSI-X [ 1.761053] eth0: RTL8168d/8111d at 0xffffc90000c7c000, 6c:f0:49:e5:02:e3, XID 083000c0 IRQ 32 [ 1.764886] Floppy drive(s): fd0 is 1.44M [ 1.784955] FDC 0 is a post-1991 82077 [ 1.797903] ahci 0000:00:11.0: version 3.0 [ 1.797909] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.798979] alloc irq_desc for 33 on node 0 [ 1.798979] alloc kstat_irqs on node 0 [ 1.798998] ahci 0000:00:11.0: irq 33 for MSI/MSI-X [ 1.799001] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.799001] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.799001] alloc irq_desc for 22 on node 0 [ 1.799001] alloc kstat_irqs on node 0 [ 1.799001] ohci1394 0000:08:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.799347] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.799347] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.799347] r8169 0000:06:00.0: setting latency timer to 64 [ 1.799347] alloc irq_desc for 34 on node 0 [ 1.799347] alloc kstat_irqs on node 0 [ 1.799347] r8169 0000:06:00.0: irq 34 for MSI/MSI-X [ 1.799474] eth1: RTL8168d/8111d at 0xffffc90000c62000, 6c:f0:49:e5:02:d3, XID 083000c0 IRQ 34 [ 1.800687] usb 4-3: new low speed USB device using ohci_hcd and address 2 [ 1.836480] pata_jmicron 0000:07:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.836500] pata_jmicron 0000:07:00.1: setting latency timer to 64 [ 1.836539] scsi0 : ahci [ 1.837434] scsi1 : pata_jmicron [ 1.837476] scsi2 : ahci [ 1.837499] scsi3 : pata_jmicron [ 1.837522] ata5: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 19 [ 1.837522] ata6: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 19 [ 1.837541] scsi4 : ahci [ 1.837602] scsi5 : ahci [ 1.837677] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 33 [ 1.837677] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 33 [ 1.837685] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 33 [ 1.837685] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 33 [ 1.837716] pata_jmicron 0000:09:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.837731] pata_jmicron 0000:09:00.1: setting latency timer to 64 [ 1.837794] scsi6 : pata_jmicron [ 1.837829] ahci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.837837] scsi7 : pata_jmicron [ 1.837859] ata7: PATA max UDMA/100 cmd 0x6f00 ctl 0x6e00 bmdma 0x6b00 irq 17 [ 1.837859] ata8: PATA max UDMA/100 cmd 0x6d00 ctl 0x6c00 bmdma 0x6b08 irq 17 [ 1.837970] scsi8 : pata_atiixp [ 1.838051] scsi9 : pata_atiixp [ 1.838674] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.838676] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.850096] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fd4ff000-fd4ff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.850152] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.850154] ahci 0000:07:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.850167] ahci 0000:07:00.0: setting latency timer to 64 [ 1.850286] scsi10 : ahci [ 1.850361] scsi11 : ahci [ 1.850380] ata11: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 18 [ 1.850382] ata12: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 18 [ 1.850510] ahci 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.870092] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.870094] ahci 0000:09:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.870098] ahci 0000:09:00.0: setting latency timer to 64 [ 1.870241] scsi12 : ahci [ 1.870297] scsi13 : ahci [ 1.870318] ata13: SATA max UDMA/133 abar m8192@0xfd1fe000 port 0xfd1fe100 irq 17 [ 1.870320] ata14: SATA max UDMA/133 abar m8192@0xfd1fe000 port 0xfd1fe180 irq 17 [ 1.993264] usb 4-3: configuration #1 chosen from 1 choice [ 2.010934] ata9.00: ATAPI: HL-DT-ST BDDVDRW CH08LS10, 1.00, max UDMA/133 [ 2.010946] ata9.00: limited to UDMA/33 due to 40-wire cable [ 2.050928] ata9.00: configured for UDMA/33 [ 2.180092] ata2: SATA link down (SStatus 0 SControl 300) [ 2.180110] ata1: SATA link down (SStatus 0 SControl 300) [ 2.180131] ata3: SATA link down (SStatus 0 SControl 300) [ 2.180147] ata4: SATA link down (SStatus 0 SControl 300) [ 2.200109] ata11: SATA link down (SStatus 0 SControl 300) [ 2.200137] ata12: SATA link down (SStatus 0 SControl 300) [ 2.300067] usb 4-4: new low speed USB device using ohci_hcd and address 3 [ 2.375437] scsi 8:0:0:0: CD-ROM HL-DT-ST BDDVDRW CH08LS10 1.00 PQ: 0 ANSI: 5 [ 2.398565] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.398567] Uniform CD-ROM driver Revision: 3.20 [ 2.398628] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 2.398664] sr 8:0:0:0: Attached scsi generic sg0 type 5 [ 2.400078] ata14: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.400660] ata13: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.400869] ata14.00: ATA-8: Hitachi HDS721016CLA382, JPEOA3EA, max UDMA/133 [ 2.400871] ata14.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.401426] ata13.00: ATA-8: Hitachi HDS721016CLA382, JPEOA3EA, max UDMA/133 [ 2.401427] ata13.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.401734] ata14.00: configured for UDMA/133 [ 2.402325] ata13.00: configured for UDMA/133 [ 2.494299] usb 4-4: configuration #1 chosen from 1 choice [ 2.499109] usbcore: registered new interface driver hiddev [ 2.504361] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input3 [ 2.504429] generic-usb 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-3/input0 [ 2.510336] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input4 [ 2.510366] generic-usb 0003:046D:C316.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-4/input0 [ 2.522248] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/input/input5 [ 2.522277] generic-usb 0003:046D:C316.0003: input,hidraw2: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-4/input1 [ 2.522295] usbcore: registered new interface driver usbhid [ 2.522296] usbhid: v2.6:USB HID core driver [ 2.562284] scsi 12:0:0:0: Direct-Access ATA Hitachi HDS72101 JPEO PQ: 0 ANSI: 5 [ 2.562386] sd 12:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.562385] sd 12:0:0:0: Attached scsi generic sg1 type 0 [ 2.562408] sd 12:0:0:0: [sda] Write Protect is off [ 2.562410] sd 12:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.562421] sd 12:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.562495] scsi 13:0:0:0: Direct-Access ATA Hitachi HDS72101 JPEO PQ: 0 ANSI: 5 [ 2.562498] sda: [ 2.562599] sd 13:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.562620] sd 13:0:0:0: [sdb] Write Protect is off [ 2.562622] sd 13:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.562619] sd 13:0:0:0: Attached scsi generic sg2 type 0 [ 2.562633] sd 13:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.562727] sdb: sda1 sda2 [ 2.565485] sd 12:0:0:0: [sda] Attached SCSI disk [ 2.585819] sdb1 sdb2 < sdb5 > [ 2.619067] sd 13:0:0:0: [sdb] Attached SCSI disk [ 3.029909] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 3.180213] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e98062006cf049] [ 5.607883] udev: starting version 151 [ 5.639057] Adding 6384632k swap on /dev/sdb5. Priority:-1 extents:1 across:6384632k [ 6.728181] type=1505 audit(1281876892.487:2): operation="profile_load" pid=588 name="/sbin/dhclient3" [ 6.728317] type=1505 audit(1281876892.487:3): operation="profile_load" pid=588 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 6.728393] type=1505 audit(1281876892.487:4): operation="profile_load" pid=588 name="/usr/lib/connman/scripts/dhclient-script" [ 7.471212] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.471263] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 7.471265] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 7.471310] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 7.471410] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfd9fe000 [ 7.471432] usb usb8: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor [ 7.471476] usb usb8: configuration #1 chosen from 1 choice [ 7.471479] xHCI xhci_add_endpoint called for root hub [ 7.471480] xHCI xhci_check_bandwidth called for root hub [ 7.471525] hub 8-0:1.0: USB hub found [ 7.471525] hub 8-0:1.0: 4 ports detected [ 8.029666] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 8.029668] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.093791] vga16fb: initializing [ 8.093791] vga16fb: mapped to 0xffff8800000a0000 [ 8.093837] fb0: VGA16 VGA frame buffer device [ 8.310389] lp: driver loaded but no devices found [ 8.393670] parport_pc 00:09: reported by Plug and Play ACPI [ 8.393711] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 8.405763] EDAC MC: Ver: 2.1.0 Jul 28 2010 [ 8.415286] EDAC amd64_edac: Ver: 3.2.0 Jul 28 2010 [ 8.415477] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 8.415485] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 8.415486] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 8.415487] (Note that use of the override may cause unknown side effects.) [ 8.415497] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 8.420423] ppdev: user-space parallel port driver [ 8.480127] lp0: using parport0 (interrupt-driven). [ 8.549217] Console: switching to colour frame buffer device 80x30 [ 8.560477] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 8.560480] Disabling lock debugging due to kernel taint [ 8.596799] [fglrx] Maximum main memory to use for locked dma buffers: 7767 MBytes. [ 8.596838] [fglrx] vendor: 1002 device: 68be count: 1 [ 8.597052] [fglrx] ioport: bar 4, base 0xde00, size: 0x100 [ 8.597062] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8.597065] pci 0000:01:00.0: setting latency timer to 64 [ 8.597258] [fglrx] Kernel PAT support is enabled [ 8.597271] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors [ 8.910473] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.257990] hda_codec: ALC889: BIOS auto-probing. [ 9.258995] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6 [ 9.269005] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.269074] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 11.496535] type=1505 audit(1281876897.259:5): operation="profile_load" pid=947 name="/usr/share/gdm/guest-session/Xsession" [ 11.497342] type=1505 audit(1281876897.259:6): operation="profile_replace" pid=951 name="/sbin/dhclient3" [ 11.497483] type=1505 audit(1281876897.259:7): operation="profile_replace" pid=951 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.497561] type=1505 audit(1281876897.259:8): operation="profile_replace" pid=951 name="/usr/lib/connman/scripts/dhclient-script" [ 11.667778] type=1505 audit(1281876897.428:9): operation="profile_load" pid=952 name="/usr/bin/evince" [ 11.669499] type=1505 audit(1281876897.428:10): operation="profile_load" pid=952 name="/usr/bin/evince-previewer" [ 11.670597] type=1505 audit(1281876897.428:11): operation="profile_load" pid=952 name="/usr/bin/evince-thumbnailer" [ 11.800785] type=1505 audit(1281876897.558:12): operation="profile_load" pid=954 name="/usr/lib/cups/backend/cups-pdf" [ 11.800980] type=1505 audit(1281876897.558:13): operation="profile_load" pid=954 name="/usr/sbin/cupsd" [ 11.945492] type=1505 audit(1281876897.708:14): operation="profile_load" pid=955 name="/usr/sbin/tcpdump" [ 12.635357] r8169: eth0: link down [ 12.635929] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.773633] r8169: eth1: link down [ 12.774147] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 16.460291] alloc irq_desc for 35 on node 0 [ 16.460293] alloc kstat_irqs on node 0 [ 16.460300] fglrx_pci 0000:01:00.0: irq 35 for MSI/MSI-X [ 16.460758] [fglrx] Firegl kernel thread PID: 1167 [ 16.460938] [fglrx] IRQ 35 Enabled [ 16.882317] [fglrx] Gart USWC size:1279 M. [ 16.882319] [fglrx] Gart cacheable size:508 M. [ 16.882323] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 16.882324] [fglrx] Reserved FB block: Unshared offset:f8ff000, size:401000 [ 16.882326] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 [ 17.397228] CPU0 attaching NULL sched-domain. [ 17.397231] CPU1 attaching NULL sched-domain. [ 17.397233] CPU2 attaching NULL sched-domain. [ 17.397234] CPU3 attaching NULL sched-domain. [ 17.397235] CPU4 attaching NULL sched-domain. [ 17.397236] CPU5 attaching NULL sched-domain. [ 17.501998] CPU0 attaching sched-domain: [ 17.502000] domain 0: span 0-5 level MC [ 17.502001] groups: 0 1 2 3 4 5 [ 17.502005] CPU1 attaching sched-domain: [ 17.502006] domain 0: span 0-5 level MC [ 17.502007] groups: 1 2 3 4 5 0 [ 17.502009] CPU2 attaching sched-domain: [ 17.502010] domain 0: span 0-5 level MC [ 17.502011] groups: 2 3 4 5 0 1 [ 17.502013] CPU3 attaching sched-domain: [ 17.502014] domain 0: span 0-5 level MC [ 17.502015] groups: 3 4 5 0 1 2 [ 17.502017] CPU4 attaching sched-domain: [ 17.502018] domain 0: span 0-5 level MC [ 17.502019] groups: 4 5 0 1 2 3 [ 17.502021] CPU5 attaching sched-domain: [ 17.502022] domain 0: span 0-5 level MC [ 17.502023] groups: 5 0 1 2 3 4 [ 22.607737] CPU0 attaching NULL sched-domain. [ 22.607740] CPU1 attaching NULL sched-domain. [ 22.607741] CPU2 attaching NULL sched-domain. [ 22.607743] CPU3 attaching NULL sched-domain. [ 22.607744] CPU4 attaching NULL sched-domain. [ 22.607745] CPU5 attaching NULL sched-domain. [ 22.672612] CPU0 attaching sched-domain: [ 22.672615] domain 0: span 0-5 level MC [ 22.672617] groups: 0 1 2 3 4 5 [ 22.672620] CPU1 attaching sched-domain: [ 22.672621] domain 0: span 0-5 level MC [ 22.672623] groups: 1 2 3 4 5 0 [ 22.672625] CPU2 attaching sched-domain: [ 22.672626] domain 0: span 0-5 level MC [ 22.672627] groups: 2 3 4 5 0 1 [ 22.672630] CPU3 attaching sched-domain: [ 22.672631] domain 0: span 0-5 level MC [ 22.672632] groups: 3 4 5 0 1 2 [ 22.672635] CPU4 attaching sched-domain: [ 22.672635] domain 0: span 0-5 level MC [ 22.672636] groups: 4 5 0 1 2 3 [ 22.672639] CPU5 attaching sched-domain: [ 22.672640] domain 0: span 0-5 level MC [ 22.672641] groups: 5 0 1 2 3 4 [ 24.268251] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 39.314232] r8169: eth1: link up [ 39.314808] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 50.030053] eth1: no IPv6 routers present