[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-33-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #70-Ubuntu SMP Thu Jul 7 21:09:46 UTC 2011 (Ubuntu 2.6.32-33.70-generic 2.6.32.41+drm33.18) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) [ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007b5a4000 (usable) [ 0.000000] BIOS-e820: 000000007b5a4000 - 000000007b5ec000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007b5ec000 - 000000007b5f6000 (ACPI data) [ 0.000000] BIOS-e820: 000000007b5f6000 - 000000007b5f9000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007b5f9000 - 000000007b61f000 (reserved) [ 0.000000] BIOS-e820: 000000007b61f000 - 000000007b621000 (usable) [ 0.000000] BIOS-e820: 000000007b621000 - 000000007b62b000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007b62b000 - 000000007b64c000 (reserved) [ 0.000000] BIOS-e820: 000000007b64c000 - 000000007b68f000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007b68f000 - 000000007b800000 (usable) [ 0.000000] BIOS-e820: 000000007de00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.6 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7b800 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07C000000 mask FFC000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ac00 (usable) [ 0.000000] modified: 000000000009ac00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007b5a4000 (usable) [ 0.000000] modified: 000000007b5a4000 - 000000007b5ec000 (ACPI NVS) [ 0.000000] modified: 000000007b5ec000 - 000000007b5f6000 (ACPI data) [ 0.000000] modified: 000000007b5f6000 - 000000007b5f9000 (ACPI NVS) [ 0.000000] modified: 000000007b5f9000 - 000000007b61f000 (reserved) [ 0.000000] modified: 000000007b61f000 - 000000007b621000 (usable) [ 0.000000] modified: 000000007b621000 - 000000007b62b000 (ACPI NVS) [ 0.000000] modified: 000000007b62b000 - 000000007b64c000 (reserved) [ 0.000000] modified: 000000007b64c000 - 000000007b68f000 (ACPI NVS) [ 0.000000] modified: 000000007b68f000 - 000000007b800000 (usable) [ 0.000000] modified: 000000007de00000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 3784f000 - 37fef3bb [ 0.000000] Allocated new RAMDISK: 008e5000 - 010853bb [ 0.000000] Move RAMDISK from 000000003784f000 - 0000000037fef3ba to 008e5000 - 010853ba [ 0.000000] ACPI: RSDP 000f0410 00024 (v03 CCEInf) [ 0.000000] ACPI: XSDT 7b5ec080 00054 (v01 CCEInf DIGIBRAS 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 7b5f5988 000F4 (v04 CCEInf DIGIBRAS 01072009 AMI 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 7B622F40/000000007B622F80, using 32 (20090903/tbfadt-486) [ 0.000000] ACPI: DSDT 7b5ec168 09819 (v02 AHM000 AHM00000 00000015 INTL 20051117) [ 0.000000] ACPI: FACS 7b622f40 00040 [ 0.000000] ACPI: APIC 7b5f5a80 00072 (v01 CCEInf DIGIBRAS 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 7b5f5af8 0014E (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 7b5f5c48 0003C (v01 CCEInf DIGIBRAS 01072009 MSFT 00000097) [ 0.000000] ACPI: SLIC 7b5f5c88 00176 (v01 CCEInf DIGIBRAS 01072009 AMI 00010013) [ 0.000000] ACPI: HPET 7b5f5e00 00038 (v01 CCEInf DIGIBRAS 01072009 AMI. 00000003) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1088MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e0ef8] TEXT DATA BSS ==> [0000100000 - 00008e0ef8] [ 0.000000] #4 [000009ac00 - 0000100000] BIOS reserved ==> [000009ac00 - 0000100000] [ 0.000000] #5 [00008e1000 - 00008e41e2] BRK ==> [00008e1000 - 00008e41e2] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e5000 - 00010853bb] NEW RAMDISK ==> [00008e5000 - 00010853bb] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00fcd50] fcd50 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007b800 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x0007b5a4 [ 0.000000] 0: 0x0007b61f -> 0x0007b621 [ 0.000000] 0: 0x0007b68f -> 0x0007b800 [ 0.000000] On node 0 totalpages: 505505 [ 0.000000] free_area_init_node: node 0, pgdat c079a7c0, node_mem_map c1087200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3946 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2177 pages used for memmap [ 0.000000] HighMem zone: 276120 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36312 r0 d21032 u1048576 [ 0.000000] pcpu-alloc: s36312 r0 d21032 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 501552 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-33-generic root=UUID=b1190c86-c6f5-4399-8ebd-0401ef27d149 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10116800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007b800) [ 0.000000] Memory: 1978212k/2023424k available (4675k kernel code, 42668k reserved, 2127k data, 668k init, 1113188k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084c000 ( 668 kB) [ 0.000000] .data : 0xc0590dc7 - 0xc07a4d88 (2127 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590dc7 (4675 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2260.905 MHz processor. [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.81 BogoMIPS (lpj=9043620) [ 0.000017] Security Framework initialized [ 0.000034] AppArmor: AppArmor initialized [ 0.000040] Mount-cache hash table entries: 512 [ 0.000144] Initializing cgroup subsys ns [ 0.000147] Initializing cgroup subsys cpuacct [ 0.000151] Initializing cgroup subsys memory [ 0.000157] Initializing cgroup subsys devices [ 0.000159] Initializing cgroup subsys freezer [ 0.000161] Initializing cgroup subsys net_cls [ 0.000179] CPU: Physical Processor ID: 0 [ 0.000180] CPU: Processor Core ID: 0 [ 0.000184] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000186] CPU: L2 cache: 256K [ 0.000187] CPU: L3 cache: 3072K [ 0.000191] mce: CPU supports 9 MCE banks [ 0.000204] CPU0: Thermal monitoring enabled (TM1) [ 0.000209] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 [ 0.000217] using mwait in idle threads. [ 0.000223] Performance Events: Westmere events, Intel PMU driver. [ 0.000230] ... version: 3 [ 0.000231] ... bit width: 48 [ 0.000233] ... generic registers: 4 [ 0.000234] ... value mask: 0000ffffffffffff [ 0.000236] ... max period: 000000007fffffff [ 0.000238] ... fixed-purpose events: 3 [ 0.000239] ... event mask: 000000070000000f [ 0.000243] Checking 'hlt' instruction... OK. [ 0.018449] ACPI: Core revision 20090903 [ 0.034719] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.034723] ftrace: allocating 21725 entries in 43 pages [ 0.042230] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.042631] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.082235] CPU0: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz stepping 05 [ 0.187410] Booting processor 1 APIC 0x4 ip 0x6000 [ 0.197633] Initializing CPU#1 [ 0.275110] CPU: Physical Processor ID: 0 [ 0.275112] CPU: Processor Core ID: 2 [ 0.275114] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.275116] CPU: L2 cache: 256K [ 0.275117] CPU: L3 cache: 3072K [ 0.275133] CPU1: Thermal monitoring enabled (TM1) [ 0.275137] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 [ 0.275174] CPU1: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz stepping 05 [ 0.275182] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.295262] Booting processor 2 APIC 0x1 ip 0x6000 [ 0.305397] Initializing CPU#2 [ 0.382893] CPU: Physical Processor ID: 0 [ 0.382895] CPU: Processor Core ID: 0 [ 0.382898] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.382899] CPU: L2 cache: 256K [ 0.382901] CPU: L3 cache: 3072K [ 0.382916] CPU2: Thermal monitoring enabled (TM1) [ 0.382920] CPU 2 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 [ 0.382935] CPU2: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz stepping 05 [ 0.382944] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.403009] Booting processor 3 APIC 0x5 ip 0x6000 [ 0.413143] Initializing CPU#3 [ 0.490675] CPU: Physical Processor ID: 0 [ 0.490676] CPU: Processor Core ID: 2 [ 0.490679] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.490680] CPU: L2 cache: 256K [ 0.490681] CPU: L3 cache: 3072K [ 0.490694] CPU3: Thermal monitoring enabled (TM1) [ 0.490697] CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 [ 0.490772] CPU3: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz stepping 05 [ 0.490779] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.510766] Brought up 4 CPUs [ 0.510768] Total of 4 processors activated (18087.51 BogoMIPS). [ 0.512944] CPU0 attaching sched-domain: [ 0.512949] domain 0: span 0,2 level SIBLING [ 0.512951] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 0.512956] domain 1: span 0-3 level MC [ 0.512958] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 0.512965] CPU1 attaching sched-domain: [ 0.512966] domain 0: span 1,3 level SIBLING [ 0.512968] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 0.512972] domain 1: span 0-3 level MC [ 0.512974] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 0.512978] CPU2 attaching sched-domain: [ 0.512980] domain 0: span 0,2 level SIBLING [ 0.512982] groups: 2 (cpu_power = 589) 0 (cpu_power = 589) [ 0.512985] domain 1: span 0-3 level MC [ 0.512987] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 0.512992] CPU3 attaching sched-domain: [ 0.512993] domain 0: span 1,3 level SIBLING [ 0.512995] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 0.512999] domain 1: span 0-3 level MC [ 0.513000] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 0.513277] devtmpfs: initialized [ 0.513569] regulator: core version 0.5 [ 0.513596] Time: 0:03:18 Date: 08/21/11 [ 0.513632] NET: Registered protocol family 16 [ 0.513722] Trying to unpack rootfs image as initramfs... [ 0.513730] EISA bus registered [ 0.513737] ACPI: bus type pci registered [ 0.513797] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.513799] PCI: MCFG area at e0000000 reserved in E820 [ 0.513801] PCI: Using MMCONFIG for extended config space [ 0.513802] PCI: Using configuration type 1 for base access [ 0.514562] bio: create slab at 0 [ 0.515666] ACPI: EC: Look up EC in DSDT [ 0.516756] ACPI: Executed 1 blocks of module-level executable AML code [ 0.527075] ACPI: Interpreter enabled [ 0.527114] ACPI: (supports S0 S1 S3 S4 S5) [ 0.527152] ACPI: Using IOAPIC for interrupt routing [ 0.527519] ACPI: BIOS _OSI(Linux) query ignored [ 0.542239] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.542636] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.542919] ACPI: No dock devices found. [ 0.543180] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.543257] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe000000-0xfe3fffff] [ 0.543263] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.543267] pci 0000:00:02.0: reg 20 io port: [0xf080-0xf087] [ 0.543365] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfe608000-0xfe6083ff] [ 0.543432] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.543437] pci 0000:00:1a.0: PME# disabled [ 0.543492] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe600000-0xfe603fff] [ 0.543551] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.543556] pci 0000:00:1b.0: PME# disabled [ 0.543644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.543649] pci 0000:00:1c.0: PME# disabled [ 0.543738] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.543743] pci 0000:00:1c.1: PME# disabled [ 0.543834] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.543838] pci 0000:00:1c.2: PME# disabled [ 0.543910] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfe607000-0xfe6073ff] [ 0.543976] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.543980] pci 0000:00:1d.0: PME# disabled [ 0.544204] pci 0000:00:1f.2: reg 10 io port: [0xf070-0xf077] [ 0.544211] pci 0000:00:1f.2: reg 14 io port: [0xf060-0xf063] [ 0.544219] pci 0000:00:1f.2: reg 18 io port: [0xf050-0xf057] [ 0.544226] pci 0000:00:1f.2: reg 1c io port: [0xf040-0xf043] [ 0.544233] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f] [ 0.544241] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe606000-0xfe6067ff] [ 0.544286] pci 0000:00:1f.2: PME# supported from D3hot [ 0.544291] pci 0000:00:1f.2: PME# disabled [ 0.544329] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe605000-0xfe6050ff] [ 0.544348] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f] [ 0.544417] pci 0000:00:1f.6: reg 10 64bit mmio: [0xfe604000-0xfe604fff] [ 0.544590] pci 0000:02:00.0: reg 10 io port: [0xe000-0xe0ff] [ 0.544599] pci 0000:02:00.0: reg 14 32bit mmio: [0xfe500000-0xfe503fff] [ 0.544665] pci 0000:02:00.0: supports D1 D2 [ 0.544667] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 0.544672] pci 0000:02:00.0: PME# disabled [ 0.544739] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff] [ 0.544744] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe500000-0xfe5fffff] [ 0.544806] pci 0000:03:00.0: reg 10 32bit mmio: [0xfe407000-0xfe4070ff] [ 0.544970] pci 0000:03:00.2: reg 10 32bit mmio: [0xfe406000-0xfe4060ff] [ 0.545132] pci 0000:03:00.3: reg 10 32bit mmio: [0xfe405000-0xfe4050ff] [ 0.545295] pci 0000:03:00.4: reg 10 32bit mmio: [0xfe404000-0xfe4040ff] [ 0.545458] pci 0000:03:00.5: reg 10 32bit mmio: [0xfe400000-0xfe403fff] [ 0.545477] pci 0000:03:00.5: reg 18 io port: [0xd100-0xd17f] [ 0.545488] pci 0000:03:00.5: reg 1c io port: [0xd000-0xd0ff] [ 0.545563] pci 0000:03:00.5: PME# supported from D0 D3hot D3cold [ 0.545569] pci 0000:03:00.5: PME# disabled [ 0.545645] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff] [ 0.545650] pci 0000:00:1c.2: bridge 32bit mmio: [0xfe400000-0xfe4fffff] [ 0.545709] pci 0000:00:1e.0: transparent bridge [ 0.545745] pci_bus 0000:00: on NUMA node 0 [ 0.545749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.545952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] [ 0.546086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.546169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.546235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.552494] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.552629] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.552760] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.552891] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.553023] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.553154] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.553284] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.553415] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.553521] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.553529] vgaarb: loaded [ 0.553627] SCSI subsystem initialized [ 0.553745] libata version 3.00 loaded. [ 0.553820] usbcore: registered new interface driver usbfs [ 0.553829] usbcore: registered new interface driver hub [ 0.553856] usbcore: registered new device driver usb [ 0.554008] ACPI: WMI: Mapper loaded [ 0.554010] PCI: Using ACPI for IRQ routing [ 0.554173] NetLabel: Initializing [ 0.554175] NetLabel: domain hash size = 128 [ 0.554176] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.554186] NetLabel: unlabeled traffic allowed by default [ 0.554234] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.554240] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.556259] Switching to clocksource tsc [ 0.558037] AppArmor: AppArmor Filesystem Enabled [ 0.558046] pnp: PnP ACPI init [ 0.558057] ACPI: bus type pnp registered [ 0.574659] pnp: PnP ACPI: found 11 devices [ 0.574662] ACPI: ACPI bus type pnp unregistered [ 0.574666] PnPBIOS: Disabled by ACPI PNP [ 0.574686] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.574689] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.574691] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved [ 0.574694] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.574696] system 00:01: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.574705] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.574711] system 00:09: ioport range 0x400-0x47f has been reserved [ 0.574714] system 00:09: ioport range 0x1180-0x119f has been reserved [ 0.574716] system 00:09: ioport range 0x500-0x57f has been reserved [ 0.574718] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.574721] system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.574723] system 00:09: iomem range 0xfed08000-0xfed08fff has been reserved [ 0.574725] system 00:09: iomem range 0xff000000-0xffffffff has been reserved [ 0.609373] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.609377] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.609384] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff [ 0.609388] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff [ 0.609396] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.609399] pci 0000:00:1c.1: IO window: 0xe000-0xefff [ 0.609406] pci 0000:00:1c.1: MEM window: 0xfe500000-0xfe5fffff [ 0.609410] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.609418] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 [ 0.609421] pci 0000:00:1c.2: IO window: 0xd000-0xdfff [ 0.609427] pci 0000:00:1c.2: MEM window: 0xfe400000-0xfe4fffff [ 0.609432] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.609439] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.609441] pci 0000:00:1e.0: IO window: disabled [ 0.609447] pci 0000:00:1e.0: MEM window: disabled [ 0.609451] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.609474] alloc irq_desc for 17 on node -1 [ 0.609476] alloc kstat_irqs on node -1 [ 0.609482] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.609488] pci 0000:00:1c.0: setting latency timer to 64 [ 0.609498] alloc irq_desc for 16 on node -1 [ 0.609500] alloc kstat_irqs on node -1 [ 0.609503] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.609508] pci 0000:00:1c.1: setting latency timer to 64 [ 0.609518] alloc irq_desc for 18 on node -1 [ 0.609519] alloc kstat_irqs on node -1 [ 0.609522] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.609526] pci 0000:00:1c.2: setting latency timer to 64 [ 0.609535] pci 0000:00:1e.0: setting latency timer to 64 [ 0.609540] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.609542] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.609544] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.609546] pci_bus 0000:01: resource 1 mem: [0x80000000-0x801fffff] [ 0.609548] pci_bus 0000:01: resource 2 pref mem [0x80200000-0x803fffff] [ 0.609550] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.609552] pci_bus 0000:02: resource 1 mem: [0xfe500000-0xfe5fffff] [ 0.609554] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.609556] pci_bus 0000:03: resource 1 mem: [0xfe400000-0xfe4fffff] [ 0.609558] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.609560] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 0.609595] NET: Registered protocol family 2 [ 0.609675] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.609900] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.610185] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.610325] TCP: Hash tables configured (established 131072 bind 65536) [ 0.610328] TCP reno registered [ 0.610385] NET: Registered protocol family 1 [ 0.610399] pci 0000:00:02.0: Boot video device [ 0.658691] cpufreq-nforce2: No nForce2 chipset. [ 0.658713] Scanning for low memory corruption every 60 seconds [ 0.658798] audit: initializing netlink socket (disabled) [ 0.658809] type=2000 audit(1313884997.502:1): initialized [ 0.668005] highmem bounce pool size: 64 pages [ 0.668009] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.669222] VFS: Disk quotas dquot_6.5.2 [ 0.669267] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.669722] fuse init (API version 7.13) [ 0.669790] msgmni has been set to 1691 [ 0.670014] alg: No test for stdrng (krng) [ 0.670062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.670065] io scheduler noop registered [ 0.670066] io scheduler anticipatory registered [ 0.670068] io scheduler deadline registered [ 0.670098] io scheduler cfq registered (default) [ 0.670240] alloc irq_desc for 24 on node -1 [ 0.670242] alloc kstat_irqs on node -1 [ 0.670254] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.670265] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.670408] alloc irq_desc for 25 on node -1 [ 0.670409] alloc kstat_irqs on node -1 [ 0.670418] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.670428] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.670553] alloc irq_desc for 26 on node -1 [ 0.670554] alloc kstat_irqs on node -1 [ 0.670563] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.670573] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.670647] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.670666] Firmware did not grant requested _OSC control [ 0.670696] Firmware did not grant requested _OSC control [ 0.670711] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.706418] ACPI: AC Adapter [AC0] (on-line) [ 0.706513] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.706516] ACPI: Power Button [PWRB] [ 0.706550] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.706552] ACPI: Sleep Button [SLPB] [ 0.706581] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.706622] ACPI: Lid Switch [LID] [ 0.706655] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.706657] ACPI: Power Button [PWRF] [ 0.707463] ACPI: SSDT 7b621a18 004A0 (v01 AMI IST 00000001 MSFT 03000001) [ 0.708189] Monitor-Mwait will be used to enter C-3 state [ 0.708233] processor LNXCPU:00: registered as cooling_device0 [ 0.712439] Freeing initrd memory: 7808k freed [ 0.714302] processor LNXCPU:01: registered as cooling_device1 [ 0.715006] processor LNXCPU:02: registered as cooling_device2 [ 0.715660] processor LNXCPU:03: registered as cooling_device3 [ 0.762365] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.762372] ACPI: Thermal Zone [TZ00] (56 C) [ 0.762491] isapnp: Scanning for PnP cards... [ 0.763546] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.764592] brd: module loaded [ 0.764946] loop: module loaded [ 0.765009] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.765300] Fixed MDIO Bus: probed [ 0.765326] PPP generic driver version 2.4.2 [ 0.765353] tun: Universal TUN/TAP device driver, 1.6 [ 0.765354] tun: (C) 1999-2004 Max Krasnyansky [ 0.765411] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.765434] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.765445] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.765449] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.765472] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.765504] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.769472] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 0.769491] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe608000 [ 0.782214] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.782283] usb usb1: configuration #1 chosen from 1 choice [ 0.782305] hub 1-0:1.0: USB hub found [ 0.782311] hub 1-0:1.0: 2 ports detected [ 0.782356] alloc irq_desc for 23 on node -1 [ 0.782358] alloc kstat_irqs on node -1 [ 0.782363] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.782372] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.782376] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.782403] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.782430] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.786383] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 0.786395] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe607000 [ 0.802172] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.802233] usb usb2: configuration #1 chosen from 1 choice [ 0.802254] hub 2-0:1.0: USB hub found [ 0.802259] hub 2-0:1.0: 2 ports detected [ 0.802295] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.802305] uhci_hcd: USB Universal Host Controller Interface driver [ 0.802355] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.807398] i8042.c: Detected active multiplexing controller, rev 1.0. [ 0.808489] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.808495] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.808497] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.808499] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.808502] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.808588] mice: PS/2 mouse device common for all mice [ 0.808744] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.808774] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.808851] device-mapper: uevent: version 1.0.3 [ 0.808932] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.809032] device-mapper: multipath: version 1.1.0 loaded [ 0.809035] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.809125] EISA: Probing bus 0 at eisa.0 [ 0.809135] Cannot allocate resource for EISA slot 2 [ 0.809156] EISA: Detected 0 cards. [ 0.809370] cpuidle: using governor ladder [ 0.809490] cpuidle: using governor menu [ 0.809804] TCP cubic registered [ 0.809937] NET: Registered protocol family 10 [ 0.810057] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.810697] NET: Registered protocol family 17 [ 0.811636] Using IPI No-Shortcut mode [ 0.811705] PM: Resume from disk failed. [ 0.811721] registered taskstats version 1 [ 0.812249] Magic number: 7:100:52 [ 0.812312] rtc_cmos 00:03: setting system clock to 2011-08-21 00:03:18 UTC (1313884998) [ 0.812316] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.812318] EDD information not available. [ 1.093560] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.129745] isapnp: No Plug & Play device found [ 1.129763] Freeing unused kernel memory: 668k freed [ 1.130011] Write protecting the kernel text: 4676k [ 1.130046] Write protecting the kernel read-only data: 1848k [ 1.144499] udev: starting version 151 [ 1.220274] usb 1-1: configuration #1 chosen from 1 choice [ 1.220398] hub 1-1:1.0: USB hub found [ 1.220485] hub 1-1:1.0: 6 ports detected [ 1.330975] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.403014] ACPI: Battery Slot [BAT0] (battery present) [ 1.463361] usb 2-1: configuration #1 chosen from 1 choice [ 1.463569] hub 2-1:1.0: USB hub found [ 1.463634] hub 2-1:1.0: 8 ports detected [ 1.539313] usb 1-1.2: new low speed USB device using ehci_hcd and address 3 [ 1.595716] ahci 0000:00:1f.2: version 3.0 [ 1.595739] alloc irq_desc for 19 on node -1 [ 1.595742] alloc kstat_irqs on node -1 [ 1.595751] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.595797] alloc irq_desc for 27 on node -1 [ 1.595799] alloc kstat_irqs on node -1 [ 1.595810] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 1.595885] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.595889] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst [ 1.595895] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.598423] scsi0 : ahci [ 1.598563] scsi1 : ahci [ 1.598634] scsi2 : ahci [ 1.598704] scsi3 : ahci [ 1.598871] ata1: SATA max UDMA/133 abar m2048@0xfe606000 port 0xfe606100 irq 27 [ 1.598877] ata2: SATA max UDMA/133 abar m2048@0xfe606000 port 0xfe606180 irq 27 [ 1.598880] ata3: DUMMY [ 1.598882] ata4: DUMMY [ 1.641539] usb 1-1.2: configuration #1 chosen from 1 choice [ 1.913902] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.913945] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.915797] ata2.00: ATAPI: Optiarc DVD RW AD-7700S, 1.03, max UDMA/100 [ 1.922628] ata2.00: configured for UDMA/100 [ 1.970462] ata1.00: ATA-8: WDC WD3200BEVT-11ZCT0, 11.01A11, max UDMA/133 [ 1.970467] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.973446] ata1.00: configured for UDMA/133 [ 1.985994] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-1 11.0 PQ: 0 ANSI: 5 [ 1.986128] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.986159] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.986213] sd 0:0:0:0: [sda] Write Protect is off [ 1.986215] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.986232] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.986336] sda: [ 1.996978] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7700S 1.03 PQ: 0 ANSI: 5 [ 1.999397] sda1 sda2 sda3 < sda5 sda6 > sda4 [ 2.032894] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.035598] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.035603] Uniform CD-ROM driver Revision: 3.20 [ 2.035710] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.035755] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.039942] usbcore: registered new interface driver hiddev [ 2.044554] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6 [ 2.044657] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.044684] usbcore: registered new interface driver usbhid [ 2.044688] usbhid: v2.6:USB HID core driver [ 2.538075] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 9.164501] udev: starting version 151 [ 9.179263] lp: driver loaded but no devices found [ 9.227662] Adding 2520056k swap on /dev/sda6. Priority:-1 extents:1 across:2520056k [ 9.420470] Linux agpgart interface v0.103 [ 9.428266] sdhci: Secure Digital Host Controller Interface driver [ 9.428269] sdhci: Copyright(c) Pierre Ossman [ 9.430127] sdhci-pci 0000:03:00.0: SDHCI controller found [197b:2382] (rev 80) [ 9.430158] sdhci-pci 0000:03:00.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.430201] sdhci-pci 0000:03:00.0: setting latency timer to 64 [ 9.430258] Registered led device: mmc0:: [ 9.430301] mmc0: SDHCI controller on PCI [0000:03:00.0] using ADMA [ 9.430316] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2381] (rev 80) [ 9.430336] sdhci-pci 0000:03:00.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.430342] sdhci-pci 0000:03:00.2: Refusing to bind to secondary interface. [ 9.430350] sdhci-pci 0000:03:00.2: PCI INT B disabled [ 9.460528] jme: JMicron JMC2XX ethernet driver version 1.0.5 [ 9.460583] jme 0000:03:00.5: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 9.460600] jme 0000:03:00.5: setting latency timer to 64 [ 9.461882] eth0: JMC250 Gigabit Ethernet ver:23 rev:3 macaddr:80:ee:73:0d:b9:63 [ 9.476946] type=1505 audit(1313895807.180:2): operation="profile_load" pid=701 name="/sbin/dhclient3" [ 9.477547] type=1505 audit(1313895807.180:3): operation="profile_load" pid=701 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.477899] type=1505 audit(1313895807.180:4): operation="profile_load" pid=701 name="/usr/lib/connman/scripts/dhclient-script" [ 9.480678] agpgart-intel 0000:00:00.0: Intel IGDNG/M Chipset [ 9.481369] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 9.491370] rtllib_crypt: registered algorithm 'NULL' [ 9.491374] rtllib_crypt: registered algorithm 'TKIP' [ 9.491377] rtllib_crypt: registered algorithm 'CCMP' [ 9.491379] rtllib_crypt: registered algorithm 'WEP' [ 9.491381] [ 9.491381] Linux kernel driver for RTL8192 based WLAN cards [ 9.491383] Copyright (c) 2007-2008, Realsil Wlan Driver [ 9.491432] rtl819xSE 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 9.491439] rtl819xSE 0000:02:00.0: setting latency timer to 64 [ 9.495138] jmb38x_ms 0000:03:00.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.495148] jmb38x_ms 0000:03:00.3: setting latency timer to 64 [ 9.495281] [drm] Initialized drm 1.1.0 20060810 [ 9.498167] Memory mapped space start: 0xfe500000 [ 9.498192] Adapter(8192SE) is found - DeviceID=8171 [ 9.499523] =========>dm_InitRateAdaptiveMask: bUseRAMask=0 [ 9.556293] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 9.585669] alloc irq_desc for 22 on node -1 [ 9.585672] alloc kstat_irqs on node -1 [ 9.585681] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.585725] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.655876] psmouse serio2: ID: 10 00 64 [ 9.656804] type=1505 audit(1313895807.360:5): operation="profile_load" pid=828 name="/usr/share/gdm/guest-session/Xsession" [ 9.656912] type=1505 audit(1313895807.360:6): operation="profile_replace" pid=829 name="/sbin/dhclient3" [ 9.657519] type=1505 audit(1313895807.360:7): operation="profile_replace" pid=829 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.657865] type=1505 audit(1313895807.360:8): operation="profile_replace" pid=829 name="/usr/lib/connman/scripts/dhclient-script" [ 9.658587] type=1505 audit(1313895807.364:9): operation="profile_load" pid=832 name="/usr/lib/cups/backend/cups-pdf" [ 9.659115] type=1505 audit(1313895807.364:10): operation="profile_load" pid=833 name="/usr/sbin/tcpdump" [ 9.659242] type=1505 audit(1313895807.364:11): operation="profile_load" pid=832 name="/usr/sbin/cupsd" [ 9.693192] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 9.710594] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 9.710692] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 9.711397] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.711401] i915 0000:00:02.0: setting latency timer to 64 [ 9.717184] alloc irq_desc for 28 on node -1 [ 9.717188] alloc kstat_irqs on node -1 [ 9.717198] i915 0000:00:02.0: irq 28 for MSI/MSI-X [ 9.717206] [drm] set up 31M of stolen space [ 9.756959] elantech.c: assuming hardware version 2, firmware version 4.1.1 [ 9.794628] elantech.c: Synaptics capabilities query result 0x7f, 0x13, 0x0d. [ 9.862023] rtl819xSE 0000:02:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin [ 9.897201] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input10 [ 9.997170] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 10.001556] ppdev: user-space parallel port driver [ 10.006860] ===>rtllib_start_scan() [ 10.010456] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.012152] alloc irq_desc for 29 on node -1 [ 10.012155] alloc kstat_irqs on node -1 [ 10.012180] jme 0000:03:00.5: irq 29 for MSI/MSI-X [ 10.012554] eth0: Link is down. [ 10.012909] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.499650] fb0: inteldrmfb frame buffer device [ 10.499653] registered panic notifier [ 10.576436] acpi device:46: registered as cooling_device4 [ 10.577122] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 10.577181] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.577206] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 10.579524] vga16fb: initializing [ 10.579528] vga16fb: mapped to 0xc00a0000 [ 10.579532] vga16fb: not registering due to another framebuffer present [ 10.803561] Console: switching to colour frame buffer device 170x48 [ 11.081102] CPU0 attaching NULL sched-domain. [ 11.081107] CPU1 attaching NULL sched-domain. [ 11.081108] CPU2 attaching NULL sched-domain. [ 11.081110] CPU3 attaching NULL sched-domain. [ 11.115184] CPU0 attaching sched-domain: [ 11.115188] domain 0: span 0,2 level SIBLING [ 11.115191] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 11.115195] domain 1: span 0-3 level MC [ 11.115198] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 11.115204] CPU1 attaching sched-domain: [ 11.115206] domain 0: span 1,3 level SIBLING [ 11.115208] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 11.115212] domain 1: span 0-3 level MC [ 11.115213] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 11.115218] CPU2 attaching sched-domain: [ 11.115219] domain 0: span 0,2 level SIBLING [ 11.115221] groups: 2 (cpu_power = 589) 0 (cpu_power = 589) [ 11.115225] domain 1: span 0-3 level MC [ 11.115227] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 11.115231] CPU3 attaching sched-domain: [ 11.115233] domain 0: span 1,3 level SIBLING [ 11.115234] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 11.115238] domain 1: span 0-3 level MC [ 11.115240] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 14.013831] CPU0 attaching NULL sched-domain. [ 14.013839] CPU1 attaching NULL sched-domain. [ 14.013842] CPU2 attaching NULL sched-domain. [ 14.013844] CPU3 attaching NULL sched-domain. [ 14.046675] CPU0 attaching sched-domain: [ 14.046680] domain 0: span 0,2 level SIBLING [ 14.046682] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 14.046687] domain 1: span 0-3 level MC [ 14.046689] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 14.046695] CPU1 attaching sched-domain: [ 14.046697] domain 0: span 1,3 level SIBLING [ 14.046699] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 14.046703] domain 1: span 0-3 level MC [ 14.046704] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 14.046709] CPU2 attaching sched-domain: [ 14.046711] domain 0: span 0,2 level SIBLING [ 14.046712] groups: 2 (cpu_power = 589) 0 (cpu_power = 589) [ 14.046716] domain 1: span 0-3 level MC [ 14.046718] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 14.046723] CPU3 attaching sched-domain: [ 14.046724] domain 0: span 1,3 level SIBLING [ 14.046726] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 14.046730] domain 1: span 0-3 level MC [ 14.046731] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 17.081269] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 50.926247] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 52.388199] Linking with DRLMRM,channel:6, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406 [ 52.388212] ===>rtllib_associate_procedure_wq(), chan:6 [ 52.388215] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 52.398219] Linking with DRLMRM,channel:6, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406 [ 52.398241] ===>rtllib_associate_procedure_wq(), chan:6 [ 52.398245] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 52.409993] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 52.412591] Associated successfully [ 52.412593] normal associate [ 52.412600] Using G rates:108 [ 52.412602] Successfully associated, ht not enabled(0, 0) [ 52.412604] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 52.413111] RX: IEEE802.1X EPAOL frame! [ 52.413719] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 53.085933] RX: IEEE802.1X EPAOL frame! [ 53.091213] RX: IEEE802.1X EPAOL frame! [ 53.091280] alg name:TKIP [ 53.141892] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 2,is_mesh is 0 [ 53.760167] RX: IEEE802.1X EPAOL frame! [ 53.760244] alg name:TKIP [ 53.760261] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 2,is_mesh is 0 [ 53.872864] DHCP pkt src port:68, dest port:67!! [ 53.916778] dm_check_edca_turbo():iot peer is unknown, bssid:00:19:5b:4f:47:17 [ 60.193388] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 61.710048] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 62.972365] wlan0: no IPv6 routers present [ 100.096565] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 100.096656] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 101.613206] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 159.947547] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 159.947629] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 161.465459] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 187.105015] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 191.092932] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 211.060211] rtl8192_hw_sleep_down(): RF Change in progress! [ 239.780789] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 239.780865] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 241.307617] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 276.937406] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 280.921431] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 299.359280] ========>too long to sleep:1f, ffffffdc, 9c4 [ 299.461502] ========>too long to sleep:6b, fffffff6, 9c4 [ 300.892292] rtl8192_hw_sleep_down(): RF Change in progress! [ 304.877959] rtl8192_hw_sleep_down(): RF Change in progress! [ 312.851214] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 339.582712] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 339.582789] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 341.101411] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 370.755279] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 374.739317] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 398.695805] rtl8192_hw_sleep_down(): RF Change in progress! [ 459.340193] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 459.340269] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 460.858707] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 468.557076] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 472.544994] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 496.499278] rtl8192_hw_sleep_down(): RF Change in progress! [ 500.484942] rtl8192_hw_sleep_down(): RF Change in progress! [ 570.346789] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 579.097432] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 579.097529] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 580.616021] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 594.302734] rtl8192_hw_sleep_down(): RF Change in progress! [ 664.164654] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 668.154121] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 692.106254] rtl8192_hw_sleep_down(): RF Change in progress! [ 696.091994] rtl8192_hw_sleep_down(): RF Change in progress! [ 698.855276] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 698.855351] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 700.373315] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 765.954383] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 789.909733] rtl8192_hw_sleep_down(): RF Change in progress! [ 793.895427] rtl8192_hw_sleep_down(): RF Change in progress! [ 818.612490] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 818.612578] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 820.134605] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 863.756177] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 867.744536] MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(0). [ 887.713226] rtl8192_hw_sleep_down(): RF Change in progress! [ 891.698949] rtl8192_hw_sleep_down(): RF Change in progress! [ 938.369609] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 938.369685] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 939.887920] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 961.561960] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 965.546412] MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(0). [ 989.502478] rtl8192_hw_sleep_down(): RF Change in progress! [ 1058.126628] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 1058.126713] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1059.645222] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1063.351676] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1087.305992] rtl8192_hw_sleep_down(): RF Change in progress! [ 1091.291692] rtl8192_hw_sleep_down(): RF Change in progress! [ 1161.153472] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1165.141833] MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(0). [ 1177.880381] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 1177.880466] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1179.398533] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1185.109498] rtl8192_hw_sleep_down(): RF Change in progress! [ 1189.095258] rtl8192_hw_sleep_down(): RF Change in progress! [ 1258.959257] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1262.943690] MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(0). [ 1286.898750] rtl8192_hw_sleep_down(): RF Change in progress! [ 1297.641454] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 1297.641528] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1299.160328] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1356.761054] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1360.745430] MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(0). [ 1384.702339] rtl8192_hw_sleep_down(): RF Change in progress! [ 1417.394996] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 1417.395093] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1418.921125] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1458.550865] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1478.520163] rtl8192_hw_sleep_down(): RF Change in progress! [ 1482.505883] rtl8192_hw_sleep_down(): RF Change in progress! [ 1537.154387] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 1537.154464] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1538.670437] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1552.368642] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1580.309436] rtl8192_hw_sleep_down(): RF Change in progress! [ 1648.168961] rtl8192_hw_sleep_down(): RF Change in progress! [ 1650.170431] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1654.159341] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1656.909307] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 1656.909385] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1658.427741] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1678.112988] rtl8192_hw_sleep_down(): RF Change in progress! [ 1682.098688] rtl8192_hw_sleep_down(): RF Change in progress! [ 1751.960152] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1755.948171] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1775.916554] rtl8192_hw_sleep_down(): RF Change in progress! [ 1776.666031] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 1776.666114] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1778.185044] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1779.902272] rtl8192_hw_sleep_down(): RF Change in progress! [ 1849.765940] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1853.750316] MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(0). [ 1877.705790] rtl8192_hw_sleep_down(): RF Change in progress! [ 1896.423856] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 1896.423948] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1897.942343] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 1947.567736] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1951.555655] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 1975.509387] rtl8192_hw_sleep_down(): RF Change in progress! [ 1979.495115] rtl8192_hw_sleep_down(): RF Change in progress! [ 2016.184737] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 2016.184816] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2017.703636] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2049.357451] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 2073.312931] rtl8192_hw_sleep_down(): RF Change in progress! [ 2077.298655] rtl8192_hw_sleep_down(): RF Change in progress! [ 2135.942532] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 2135.942610] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2137.460896] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2147.159248] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 2151.147609] MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(0). [ 2171.116478] rtl8192_hw_sleep_down(): RF Change in progress! [ 2175.102220] rtl8192_hw_sleep_down(): RF Change in progress! [ 2244.965034] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 2255.699289] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 2255.699383] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2257.218183] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2272.905761] rtl8192_hw_sleep_down(): RF Change in progress! [ 2342.766831] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 2346.754752] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 2370.709322] rtl8192_hw_sleep_down(): RF Change in progress! [ 2374.695013] rtl8192_hw_sleep_down(): RF Change in progress! [ 2375.457373] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 2375.457451] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2376.975544] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2444.556548] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 2448.544972] MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(0). [ 2468.512868] rtl8192_hw_sleep_down(): RF Change in progress! [ 2472.498604] rtl8192_hw_sleep_down(): RF Change in progress! [ 2495.214232] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 2495.214316] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2496.732795] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2542.362330] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 2546.346365] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 2570.302111] rtl8192_hw_sleep_down(): RF Change in progress! [ 2614.971959] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 2614.972038] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2616.490147] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2644.152048] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 2668.105719] rtl8192_hw_sleep_down(): RF Change in progress! [ 2672.091440] rtl8192_hw_sleep_down(): RF Change in progress! [ 2734.725353] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 2734.725438] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2736.251398] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2741.953848] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 2765.909276] rtl8192_hw_sleep_down(): RF Change in progress! [ 2769.894978] rtl8192_hw_sleep_down(): RF Change in progress! [ 2839.755645] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 2843.744009] MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(0). [ 2854.485557] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 2854.485633] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 2856.000759] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 3373.754342] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 3375.272378] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 3862.783784] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 3864.301387] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4052.162972] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 4052.163048] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4053.681571] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4083.303484] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 4087.287922] MgntActSet_RF_State(): RF Change in progress! Wait to set..StateToSet(0). [ 4111.244742] rtl8192_hw_sleep_down(): RF Change in progress! [ 4171.814709] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 4171.814787] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4173.339066] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4181.106271] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 4185.093253] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 4209.048301] rtl8192_hw_sleep_down(): RF Change in progress!