[ 0.000000] microcode: microcode updated early to revision 0xe2, date = 2020-07-14 [ 0.000000] Linux version 5.8.0-43-generic (buildd@lcy01-amd64-018) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #49~20.04.1-Ubuntu SMP Fri Feb 5 09:57:56 UTC 2021 (Ubuntu 5.8.0-43.49~20.04.1-generic 5.8.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-43-generic root=UUID=240f372f-ab2d-4586-b48b-c7cb5967a9c6 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a208ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a2090000-0x00000000a2090fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a2091000-0x00000000a2091fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a2092000-0x00000000a8245fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a8246000-0x00000000a85bbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a85bc000-0x00000000a85f3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a85f4000-0x00000000a8f17fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a8f18000-0x00000000a95fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a95fe000-0x00000000a95fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a95ff000-0x00000000af7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x9ffdb018-0x9ffeb057] usable ==> usable [ 0.000000] e820: update [mem 0x9ffdb018-0x9ffeb057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000009ffdb017] usable [ 0.000000] reserve setup_data: [mem 0x000000009ffdb018-0x000000009ffeb057] usable [ 0.000000] reserve setup_data: [mem 0x000000009ffeb058-0x00000000a208ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000a2090000-0x00000000a2090fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000a2091000-0x00000000a2091fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000a2092000-0x00000000a8245fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000a8246000-0x00000000a85bbfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000a85bc000-0x00000000a85f3fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000a85f4000-0x00000000a8f17fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000a8f18000-0x00000000a95fdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000a95fe000-0x00000000a95fefff] usable [ 0.000000] reserve setup_data: [mem 0x00000000a95ff000-0x00000000af7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000014f7fffff] usable [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0xa85c7000 ACPI 2.0=0xa85c7000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 ESRT=0xa92a9018 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.1.1 present. [ 0.000000] DMI: Dell Inc. Inspiron 14-3467/0WPN9K, BIOS 2.9.0 01/17/2019 [ 0.000000] tsc: Detected 2000.000 MHz processor [ 0.001392] tsc: Detected 1999.968 MHz TSC [ 0.001392] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001394] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001402] last_pfn = 0x14f800 max_arch_pfn = 0x400000000 [ 0.001406] MTRR default type: write-back [ 0.001407] MTRR fixed ranges enabled: [ 0.001409] 00000-9FFFF write-back [ 0.001409] A0000-BFFFF uncachable [ 0.001411] C0000-FFFFF write-protect [ 0.001411] MTRR variable ranges enabled: [ 0.001413] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.001414] 1 base 00B0000000 mask 7FF0000000 uncachable [ 0.001415] 2 base 00AC000000 mask 7FFC000000 uncachable [ 0.001416] 3 base 00AB000000 mask 7FFF000000 uncachable [ 0.001417] 4 disabled [ 0.001417] 5 disabled [ 0.001418] 6 disabled [ 0.001418] 7 disabled [ 0.001419] 8 disabled [ 0.001420] 9 disabled [ 0.001849] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002015] last_pfn = 0xa95ff max_arch_pfn = 0x400000000 [ 0.011500] found SMP MP-table at [mem 0x000fcd50-0x000fcd5f] [ 0.011514] esrt: Reserving ESRT space from 0x00000000a92a9018 to 0x00000000a92a9050. [ 0.011522] check: Scanning 1 areas for low memory corruption [ 0.011527] Using GB pages for direct mapping [ 0.012306] secureboot: Secure boot disabled [ 0.012307] RAMDISK: [mem 0x3ce59000-0x3fffdfff] [ 0.012317] ACPI: Early table checksum verification disabled [ 0.012321] ACPI: RSDP 0x00000000A85C7000 000024 (v02 DELL ) [ 0.012325] ACPI: XSDT 0x00000000A85C70B0 0000DC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.012331] ACPI: FACP 0x00000000A85EB4B0 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.012336] ACPI: DSDT 0x00000000A85C7218 024297 (v02 DELL CBX3 01072009 INTL 20160422) [ 0.012340] ACPI: FACS 0x00000000A8F15180 000040 [ 0.012342] ACPI: APIC 0x00000000A85EB5C0 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.012346] ACPI: FPDT 0x00000000A85EB648 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.012349] ACPI: FIDT 0x00000000A85EB690 0000AC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.012352] ACPI: MCFG 0x00000000A85EB740 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.012355] ACPI: HPET 0x00000000A85EB780 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.012358] ACPI: SSDT 0x00000000A85EB7B8 000359 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.012361] ACPI: BOOT 0x00000000A85EBB18 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.012364] ACPI: SSDT 0x00000000A85EBB40 0012EA (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.012367] ACPI: HPET 0x00000000A85ECE30 000038 (v01 INTEL SKL-ULT 00000001 MSFT 0000005F) [ 0.012370] ACPI: SSDT 0x00000000A85ECE68 000A34 (v02 INTEL xh_OEMBD 00000000 INTL 20160422) [ 0.012373] ACPI: UEFI 0x00000000A85ED8A0 000042 (v01 00000000 00000000) [ 0.012377] ACPI: SSDT 0x00000000A85ED8E8 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.012380] ACPI: LPIT 0x00000000A85EE7C8 000094 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F) [ 0.012384] ACPI: WSMT 0x00000000A85EE860 000028 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F) [ 0.012387] ACPI: SSDT 0x00000000A85EE888 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.012391] ACPI: SSDT 0x00000000A85EEB28 000E3F (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.012395] ACPI: DBGP 0x00000000A85EF968 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.012398] ACPI: DBG2 0x00000000A85EF9A0 000061 (v00 INTEL 00000002 MSFT 0000005F) [ 0.012401] ACPI: SSDT 0x00000000A85EFA08 003EA6 (v02 DptfTa DptfTabl 00001000 INTL 20160422) [ 0.012405] ACPI: SLIC 0x00000000A85F38B0 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.012408] ACPI: DMAR 0x00000000A85F3A28 0000F0 (v01 INTEL EDK2 00000001 INTL 00000001) [ 0.012411] ACPI: BGRT 0x00000000A85F3B18 000038 (v00 \xf3\xee 01072009 AMI 00010013) [ 0.012422] ACPI: Local APIC address 0xfee00000 [ 0.012614] No NUMA configuration found [ 0.012615] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff] [ 0.012628] NODE_DATA(0) allocated [mem 0x14f7d6000-0x14f7fffff] [ 0.012998] Zone ranges: [ 0.012999] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.013001] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.013002] Normal [mem 0x0000000100000000-0x000000014f7fffff] [ 0.013003] Device empty [ 0.013004] Movable zone start for each node [ 0.013008] Early memory node ranges [ 0.013009] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.013010] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.013011] node 0: [mem 0x0000000000100000-0x00000000a208ffff] [ 0.013012] node 0: [mem 0x00000000a2092000-0x00000000a8245fff] [ 0.013012] node 0: [mem 0x00000000a95fe000-0x00000000a95fefff] [ 0.013013] node 0: [mem 0x0000000100000000-0x000000014f7fffff] [ 0.013396] Zeroed struct page in unavailable ranges: 34334 pages [ 0.013398] Initmem setup node 0 [mem 0x0000000000001000-0x000000014f7fffff] [ 0.013400] On node 0 totalpages: 1014242 [ 0.013402] DMA zone: 64 pages used for memmap [ 0.013402] DMA zone: 25 pages reserved [ 0.013403] DMA zone: 3997 pages, LIFO batch:0 [ 0.013458] DMA32 zone: 10698 pages used for memmap [ 0.013458] DMA32 zone: 684613 pages, LIFO batch:63 [ 0.023442] Normal zone: 5088 pages used for memmap [ 0.023442] Normal zone: 325632 pages, LIFO batch:63 [ 0.028206] Reserving Intel graphics memory at [mem 0xab800000-0xaf7fffff] [ 0.028516] ACPI: PM-Timer IO Port: 0x1808 [ 0.028518] ACPI: Local APIC address 0xfee00000 [ 0.028525] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028526] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028527] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028528] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.028555] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.028557] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028559] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028560] ACPI: IRQ0 used by override. [ 0.028561] ACPI: IRQ9 used by override. [ 0.028563] Using ACPI (MADT) for SMP configuration information [ 0.028565] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028571] e820: update [mem 0xa5822000-0xa5865fff] usable ==> reserved [ 0.028581] TSC deadline timer available [ 0.028582] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028603] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028605] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.028607] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.028608] PM: hibernation: Registered nosave memory: [mem 0x9ffdb000-0x9ffdbfff] [ 0.028610] PM: hibernation: Registered nosave memory: [mem 0x9ffeb000-0x9ffebfff] [ 0.028612] PM: hibernation: Registered nosave memory: [mem 0xa2090000-0xa2090fff] [ 0.028612] PM: hibernation: Registered nosave memory: [mem 0xa2091000-0xa2091fff] [ 0.028614] PM: hibernation: Registered nosave memory: [mem 0xa5822000-0xa5865fff] [ 0.028616] PM: hibernation: Registered nosave memory: [mem 0xa8246000-0xa85bbfff] [ 0.028616] PM: hibernation: Registered nosave memory: [mem 0xa85bc000-0xa85f3fff] [ 0.028617] PM: hibernation: Registered nosave memory: [mem 0xa85f4000-0xa8f17fff] [ 0.028618] PM: hibernation: Registered nosave memory: [mem 0xa8f18000-0xa95fdfff] [ 0.028619] PM: hibernation: Registered nosave memory: [mem 0xa95ff000-0xaf7fffff] [ 0.028620] PM: hibernation: Registered nosave memory: [mem 0xaf800000-0xdfffffff] [ 0.028621] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.028621] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.028622] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.028623] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.028623] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.028624] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.028624] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.028625] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.028626] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028627] [mem 0xaf800000-0xdfffffff] available for PCI devices [ 0.028629] Booting paravirtualized kernel on bare hardware [ 0.028632] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.028639] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.028921] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288 [ 0.028929] pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152 [ 0.028930] pcpu-alloc: [0] 0 1 2 3 [ 0.028976] Built 1 zonelists, mobility grouping on. Total pages: 998367 [ 0.028977] Policy zone: Normal [ 0.028978] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-43-generic root=UUID=240f372f-ab2d-4586-b48b-c7cb5967a9c6 ro quiet splash vt.handoff=7 [ 0.029430] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.029645] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.029726] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.053502] Memory: 3707992K/4056968K available (14339K kernel code, 2563K rwdata, 5356K rodata, 2636K init, 4900K bss, 348976K reserved, 0K cma-reserved) [ 0.053512] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.053664] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.053682] Kernel/User page tables isolation: enabled [ 0.053704] ftrace: allocating 46188 entries in 181 pages [ 0.074293] ftrace: allocated 181 pages with 5 groups [ 0.074427] rcu: Hierarchical RCU implementation. [ 0.074428] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.074429] Trampoline variant of Tasks RCU enabled. [ 0.074430] Rude variant of Tasks RCU enabled. [ 0.074430] Tracing variant of Tasks RCU enabled. [ 0.074431] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.074432] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.078274] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.078777] random: crng done (trusting CPU's manufacturer) [ 0.078801] vt handoff: transparent VT on vt#7 [ 0.078810] Console: colour dummy device 80x25 [ 0.078816] printk: console [tty0] enabled [ 0.078840] ACPI: Core revision 20200528 [ 0.079149] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.079221] APIC: Switch to symmetric I/O mode setup [ 0.079223] DMAR: Host address width 39 [ 0.079224] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.079231] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.079232] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.079237] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.079238] DMAR: RMRR base: 0x000000a830f000 end: 0x000000a832efff [ 0.079239] DMAR: RMRR base: 0x000000ab000000 end: 0x000000af7fffff [ 0.079241] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.079241] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.079243] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.079244] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.079245] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.081118] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.081120] x2apic enabled [ 0.081132] Switched APIC routing to cluster x2apic. [ 0.085189] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.103094] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a8208cdd2, max_idle_ns: 881590748921 ns [ 0.103099] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.93 BogoMIPS (lpj=7999872) [ 0.103102] pid_max: default: 32768 minimum: 301 [ 0.107969] LSM: Security Framework initializing [ 0.107982] Yama: becoming mindful. [ 0.108017] AppArmor: AppArmor initialized [ 0.108067] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.108080] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.108419] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.108439] process: using mwait in idle threads [ 0.108442] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.108443] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.108446] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.108448] Spectre V2 : Mitigation: Full generic retpoline [ 0.108448] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.108449] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.108450] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.108451] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.108452] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.108458] SRBDS: Mitigation: Microcode [ 0.108458] MDS: Mitigation: Clear CPU buffers [ 0.108809] Freeing SMP alternatives memory: 40K [ 0.111208] smpboot: CPU0: Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.111371] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.111377] ... version: 4 [ 0.111378] ... bit width: 48 [ 0.111378] ... generic registers: 4 [ 0.111379] ... value mask: 0000ffffffffffff [ 0.111380] ... max period: 00007fffffffffff [ 0.111380] ... fixed-purpose events: 3 [ 0.111381] ... event mask: 000000070000000f [ 0.111428] rcu: Hierarchical SRCU implementation. [ 0.112495] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.112554] smp: Bringing up secondary CPUs ... [ 0.112656] x86: Booting SMP configuration: [ 0.112657] .... node #0, CPUs: #1 #2 [ 0.115898] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.115898] #3 [ 0.115898] smp: Brought up 1 node, 4 CPUs [ 0.115898] smpboot: Max logical packages: 1 [ 0.115898] smpboot: Total of 4 processors activated (15999.74 BogoMIPS) [ 0.119361] devtmpfs: initialized [ 0.119361] x86/mm: Memory block size: 128MB [ 0.119361] PM: Registering ACPI NVS region [mem 0xa2090000-0xa2090fff] (4096 bytes) [ 0.119361] PM: Registering ACPI NVS region [mem 0xa85f4000-0xa8f17fff] (9584640 bytes) [ 0.119369] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.119369] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.119369] pinctrl core: initialized pinctrl subsystem [ 0.119369] PM: RTC time: 17:14:36, date: 2021-02-18 [ 0.119369] thermal_sys: Registered thermal governor 'fair_share' [ 0.119369] thermal_sys: Registered thermal governor 'bang_bang' [ 0.119369] thermal_sys: Registered thermal governor 'step_wise' [ 0.119369] thermal_sys: Registered thermal governor 'user_space' [ 0.119369] thermal_sys: Registered thermal governor 'power_allocator' [ 0.119369] NET: Registered protocol family 16 [ 0.119486] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.119528] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.119574] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.119586] audit: initializing netlink subsys (disabled) [ 0.119602] audit: type=2000 audit(1613668476.040:1): state=initialized audit_enabled=0 res=1 [ 0.119602] EISA bus registered [ 0.119602] cpuidle: using governor ladder [ 0.119602] cpuidle: using governor menu [ 0.119602] Simple Boot Flag at 0x47 set to 0x80 [ 0.119602] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.119602] ACPI: bus type PCI registered [ 0.119602] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.119602] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.119602] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.119602] PCI: Using configuration type 1 for base access [ 0.119602] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.123134] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.123134] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.123209] ACPI: Added _OSI(Module Device) [ 0.123210] ACPI: Added _OSI(Processor Device) [ 0.123211] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.123212] ACPI: Added _OSI(Processor Aggregator Device) [ 0.123213] ACPI: Added _OSI(Linux-Dell-Video) [ 0.123214] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.123215] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.181366] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.187611] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.196885] ACPI: Dynamic OEM Table Load: [ 0.196893] ACPI: SSDT 0xFFFF952E0A23E000 0005AC (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.198909] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.200455] ACPI: Dynamic OEM Table Load: [ 0.200460] ACPI: SSDT 0xFFFF952E0A3DB000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.202889] ACPI: Dynamic OEM Table Load: [ 0.202895] ACPI: SSDT 0xFFFF952E0A23F000 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.205364] ACPI: Dynamic OEM Table Load: [ 0.205369] ACPI: SSDT 0xFFFF952E0A39F600 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.209281] ACPI: EC: EC started [ 0.209281] ACPI: EC: interrupt blocked [ 0.213334] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.213336] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 0.213337] ACPI: Interpreter enabled [ 0.213396] ACPI: (supports S0 S3 S4 S5) [ 0.213398] ACPI: Using IOAPIC for interrupt routing [ 0.213455] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.214409] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.249681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.249689] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.251889] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.251890] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.253021] PCI host bridge to bus 0000:00 [ 0.253024] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.253025] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.253027] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.253028] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xdfffffff window] [ 0.253031] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.253032] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.253044] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 0.253222] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 0.253236] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit] [ 0.253243] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.253248] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.253268] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.253469] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.253485] pci 0000:00:04.0: reg 0x10: [mem 0xd1320000-0xd1327fff 64bit] [ 0.253781] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.253806] pci 0000:00:14.0: reg 0x10: [mem 0xd1310000-0xd131ffff 64bit] [ 0.253885] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.254192] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.254217] pci 0000:00:14.2: reg 0x10: [mem 0xd1338000-0xd1338fff 64bit] [ 0.254443] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.254474] pci 0000:00:15.0: reg 0x10: [mem 0xd1337000-0xd1337fff 64bit] [ 0.254762] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 [ 0.254794] pci 0000:00:15.1: reg 0x10: [mem 0xd1336000-0xd1336fff 64bit] [ 0.255105] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.255134] pci 0000:00:16.0: reg 0x10: [mem 0xd1335000-0xd1335fff 64bit] [ 0.255218] pci 0000:00:16.0: PME# supported from D3hot [ 0.255473] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.255494] pci 0000:00:17.0: reg 0x10: [mem 0xd1330000-0xd1331fff] [ 0.255503] pci 0000:00:17.0: reg 0x14: [mem 0xd1334000-0xd13340ff] [ 0.255512] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.255520] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.255529] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.255538] pci 0000:00:17.0: reg 0x24: [mem 0xd1333000-0xd13337ff] [ 0.255587] pci 0000:00:17.0: PME# supported from D3hot [ 0.255806] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 [ 0.255904] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.256215] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 [ 0.256311] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.256612] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 0.256930] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.256946] pci 0000:00:1f.2: reg 0x10: [mem 0xd132c000-0xd132ffff] [ 0.257187] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300 [ 0.257217] pci 0000:00:1f.3: reg 0x10: [mem 0xd1328000-0xd132bfff 64bit] [ 0.257245] pci 0000:00:1f.3: reg 0x20: [mem 0xd1300000-0xd130ffff 64bit] [ 0.257299] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.257638] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.257699] pci 0000:00:1f.4: reg 0x10: [mem 0xd1332000-0xd13320ff 64bit] [ 0.257770] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.258367] pci 0000:01:00.0: [168c:0042] type 00 class 0x028000 [ 0.258815] pci 0000:01:00.0: reg 0x10: [mem 0xd1000000-0xd11fffff 64bit] [ 0.260127] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.261587] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.261592] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd11fffff] [ 0.261670] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000 [ 0.261701] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.261731] pci 0000:02:00.0: reg 0x18: [mem 0xd1204000-0xd1204fff 64bit] [ 0.261749] pci 0000:02:00.0: reg 0x20: [mem 0xd1200000-0xd1203fff 64bit pref] [ 0.261863] pci 0000:02:00.0: supports D1 D2 [ 0.261865] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.262024] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.262027] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.262030] pci 0000:00:1c.5: bridge window [mem 0xd1200000-0xd12fffff] [ 0.264167] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.264249] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.264328] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.264408] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.264487] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.264566] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.264644] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.264723] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.267099] ACPI: EC: interrupt unblocked [ 0.267099] ACPI: EC: event unblocked [ 0.267107] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.267107] ACPI: EC: GPE=0x45 [ 0.267107] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete [ 0.267107] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events [ 0.267131] iommu: Default domain type: Translated [ 0.267320] SCSI subsystem initialized [ 0.267337] libata version 3.00 loaded. [ 0.267337] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.267337] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.267337] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.267337] vgaarb: loaded [ 0.267337] ACPI: bus type USB registered [ 0.267337] usbcore: registered new interface driver usbfs [ 0.267337] usbcore: registered new interface driver hub [ 0.267337] usbcore: registered new device driver usb [ 0.267337] pps_core: LinuxPPS API ver. 1 registered [ 0.267337] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.267337] PTP clock support registered [ 0.267337] EDAC MC: Ver: 3.0.0 [ 0.267377] Registered efivars operations [ 0.267377] NetLabel: Initializing [ 0.267377] NetLabel: domain hash size = 128 [ 0.267377] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.267377] NetLabel: unlabeled traffic allowed by default [ 0.267377] PCI: Using ACPI for IRQ routing [ 0.299105] PCI: pci_cache_line_size set to 64 bytes [ 0.299460] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.299462] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.299463] e820: reserve RAM buffer [mem 0x9ffdb018-0x9fffffff] [ 0.299464] e820: reserve RAM buffer [mem 0xa2090000-0xa3ffffff] [ 0.299464] e820: reserve RAM buffer [mem 0xa5822000-0xa7ffffff] [ 0.299465] e820: reserve RAM buffer [mem 0xa8246000-0xabffffff] [ 0.299467] e820: reserve RAM buffer [mem 0xa95ff000-0xabffffff] [ 0.299467] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff] [ 0.300128] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.300132] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.303099] clocksource: Switched to clocksource tsc-early [ 0.319202] VFS: Disk quotas dquot_6.6.0 [ 0.319239] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.319362] AppArmor: AppArmor Filesystem Enabled [ 0.319398] pnp: PnP ACPI init [ 0.319808] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.319810] system 00:00: [io 0xffff] has been reserved [ 0.319811] system 00:00: [io 0xffff] has been reserved [ 0.319813] system 00:00: [io 0xffff] has been reserved [ 0.319814] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.319819] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.319825] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.319969] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.320021] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.320025] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.320106] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.320126] pnp 00:04: Plug and Play ACPI device, IDs SYN0609 PNP0f13 (active) [ 0.320477] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.320478] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.320480] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.320481] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.320483] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.320484] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.320486] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.320487] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.320489] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.320491] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.320494] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.320549] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.320551] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.320552] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.320554] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.320555] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.320556] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.320558] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.320561] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.321005] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.321009] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.322749] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.322751] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.322752] system 00:08: [mem 0xfe035000-0xfe035fff] has been reserved [ 0.322754] system 00:08: [mem 0xfe034008-0xfe034fff] has been reserved [ 0.322757] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.323599] system 00:09: [mem 0xfe034000-0xfe034007] has been reserved [ 0.323603] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.325840] pnp: PnP ACPI: found 10 devices [ 0.331740] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.331809] NET: Registered protocol family 2 [ 0.331975] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.332002] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.332076] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.332130] TCP: Hash tables configured (established 32768 bind 32768) [ 0.332244] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.332262] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.332311] NET: Registered protocol family 1 [ 0.332316] NET: Registered protocol family 44 [ 0.332330] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.332336] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd11fffff] [ 0.332343] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.332345] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.332349] pci 0000:00:1c.5: bridge window [mem 0xd1200000-0xd12fffff] [ 0.332357] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.332358] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.332360] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.332361] pci_bus 0000:00: resource 7 [mem 0xaf800000-0xdfffffff window] [ 0.332362] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.332364] pci_bus 0000:01: resource 1 [mem 0xd1000000-0xd11fffff] [ 0.332365] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.332366] pci_bus 0000:02: resource 1 [mem 0xd1200000-0xd12fffff] [ 0.332562] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.333545] PCI: CLS 0 bytes, default 64 [ 0.333586] Trying to unpack rootfs image as initramfs... [ 0.489081] Freeing initrd memory: 50836K [ 0.489180] DMAR: ACPI device "device:69" under DMAR at fed91000 as 00:15.0 [ 0.489183] DMAR: ACPI device "device:6a" under DMAR at fed91000 as 00:15.1 [ 0.511163] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.511171] software IO TLB: mapped [mem 0x9bfdb000-0x9ffdb000] (64MB) [ 0.511429] check: Scanning for low memory corruption every 60 seconds [ 0.511908] Initialise system trusted keyrings [ 0.511938] Key type blacklist registered [ 0.511983] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.513445] zbud: loaded [ 0.513724] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.513905] fuse: init (API version 7.31) [ 0.514047] integrity: Platform Keyring initialized [ 0.525245] Key type asymmetric registered [ 0.525246] Asymmetric key parser 'x509' registered [ 0.525254] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.525296] io scheduler mq-deadline registered [ 0.525697] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 0.525761] pcieport 0000:00:1c.0: AER: enabled with IRQ 122 [ 0.526027] pcieport 0000:00:1c.5: PME: Signaling with IRQ 123 [ 0.526081] pcieport 0000:00:1c.5: AER: enabled with IRQ 123 [ 0.526171] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.526231] efifb: probing for efifb [ 0.526256] efifb: showing boot graphics [ 0.526958] efifb: framebuffer at 0xc0000000, using 4128k, total 4128k [ 0.526959] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.526959] efifb: scrolling: redraw [ 0.526961] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.527003] fbcon: Deferring console take-over [ 0.527004] fb0: EFI VGA frame buffer device [ 0.527011] intel_idle: MWAIT substates: 0x11142120 [ 0.527012] intel_idle: v0.5.1 model 0x4E [ 0.527294] intel_idle: Local APIC timer is reliable in all C-states [ 0.528948] ACPI: AC Adapter [AC] (off-line) [ 0.529027] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.529064] ACPI: Lid Switch [LID0] [ 0.529095] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.529118] ACPI: Power Button [PBTN] [ 0.529146] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.529161] ACPI: Sleep Button [SBTN] [ 0.529195] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.529218] ACPI: Power Button [PWRF] [ 0.531394] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.531395] ACPI: Thermal Zone [THM] (25 C) [ 0.531597] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.535859] Linux agpgart interface v0.103 [ 0.538610] loop: module loaded [ 0.539198] libphy: Fixed MDIO Bus: probed [ 0.539199] tun: Universal TUN/TAP device driver, 1.6 [ 0.539231] PPP generic driver version 2.4.2 [ 0.539290] VFIO - User Level meta-driver version: 0.3 [ 0.539395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.539399] ehci-pci: EHCI PCI platform driver [ 0.539419] ehci-platform: EHCI generic platform driver [ 0.539432] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.539435] ohci-pci: OHCI PCI platform driver [ 0.539444] ohci-platform: OHCI generic platform driver [ 0.539739] uhci_hcd: USB Universal Host Controller Interface driver [ 0.539813] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.540251] i8042: Warning: Keylock active [ 0.542507] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.542514] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.542666] mousedev: PS/2 mouse device common for all mice [ 0.542890] rtc_cmos 00:01: RTC can wake from S4 [ 0.543996] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.544015] rtc_cmos 00:01: registered as rtc0 [ 0.544469] rtc_cmos 00:01: setting system clock to 2021-02-18T17:14:36 UTC (1613668476) [ 0.544486] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.544494] i2c /dev entries driver [ 0.544544] device-mapper: uevent: version 1.0.3 [ 0.544599] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com [ 0.544620] platform eisa.0: Probing EISA bus 0 [ 0.544622] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.544623] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.544624] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.544625] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.544626] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.544627] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.544628] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.544629] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.544630] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.544631] platform eisa.0: EISA: Detected 0 cards [ 0.544635] intel_pstate: Intel P-state driver initializing [ 0.544786] intel_pstate: HWP enabled [ 0.544833] ledtrig-cpu: registered to indicate activity on CPUs [ 0.544837] EFI Variables Facility v0.08 2004-May-17 [ 0.553907] intel_pmc_core INT33A1:00: initialized [ 0.554007] drop_monitor: Initializing network drop monitor service [ 0.554484] NET: Registered protocol family 10 [ 0.562922] Segment Routing with IPv6 [ 0.562951] NET: Registered protocol family 17 [ 0.563207] Key type dns_resolver registered [ 0.563542] microcode: sig=0x406e3, pf=0x80, revision=0xe2 [ 0.563590] microcode: Microcode Update Driver: v2.2. [ 0.563595] IPI shorthand broadcast: enabled [ 0.563604] sched_clock: Marking stable (563067798, 517034)->(567799089, -4214257) [ 0.563964] registered taskstats version 1 [ 0.563976] Loading compiled-in X.509 certificates [ 0.564793] Loaded X.509 cert 'Build time autogenerated kernel key: a4bf29c873175f8a852fbcf55017dd6a88fb8d5b' [ 0.564824] zswap: loaded using pool lzo/zbud [ 0.564928] Key type ._fscrypt registered [ 0.564929] Key type .fscrypt registered [ 0.564929] Key type fscrypt-provisioning registered [ 0.566945] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.568466] Key type encrypted registered [ 0.568469] AppArmor: AppArmor sha1 policy hashing enabled [ 0.568767] integrity: Loading X.509 certificate: UEFI:db [ 0.568800] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' [ 0.568801] integrity: Loading X.509 certificate: UEFI:db [ 0.568833] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.568833] integrity: Loading X.509 certificate: UEFI:db [ 0.568856] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.569038] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.569058] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469' [ 0.569059] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.569389] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.570108] ima: No TPM chip found, activating TPM-bypass! [ 0.570113] ima: Allocated hash algorithm: sha1 [ 0.570118] ima: No architecture policies found [ 0.570129] evm: Initialising EVM extended attributes: [ 0.570129] evm: security.selinux [ 0.570130] evm: security.SMACK64 [ 0.570131] evm: security.SMACK64EXEC [ 0.570131] evm: security.SMACK64TRANSMUTE [ 0.570132] evm: security.SMACK64MMAP [ 0.570132] evm: security.apparmor [ 0.570133] evm: security.ima [ 0.570133] evm: security.capability [ 0.570134] evm: HMAC attrs: 0x1 [ 0.571529] PM: Magic number: 9:299:239 [ 0.571728] RAS: Correctable Errors collector initialized. [ 0.573021] Freeing unused decrypted memory: 2040K [ 0.573570] Freeing unused kernel image (initmem) memory: 2636K [ 0.603290] Write protecting the kernel read-only data: 22528k [ 0.604477] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 0.604910] Freeing unused kernel image (rodata/data gap) memory: 788K [ 0.696720] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.696722] x86/mm: Checking user space page tables [ 0.772785] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.772800] Run /init as init process [ 0.772802] with arguments: [ 0.772803] /init [ 0.772804] splash [ 0.772805] with environment: [ 0.772806] HOME=/ [ 0.772807] TERM=linux [ 0.772808] BOOT_IMAGE=/boot/vmlinuz-5.8.0-43-generic [ 0.936367] hid: raw HID events driver (C) Jiri Kosina [ 0.940616] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.945032] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 0.945080] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.947382] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 0.951166] libphy: r8169: probed [ 0.956022] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.956050] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.957140] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 0.957709] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.957993] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 0.957996] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.957998] usb usb1: Product: xHCI Host Controller [ 0.958000] usb usb1: Manufacturer: Linux 5.8.0-43-generic xhci-hcd [ 0.958006] usb usb1: SerialNumber: 0000:00:14.0 [ 0.958360] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 0.958586] hub 1-0:1.0: USB hub found [ 0.958608] hub 1-0:1.0: 12 ports detected [ 0.958892] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 0.959384] r8169 0000:02:00.0 eth0: RTL8106e, 6c:2b:59:39:47:06, XID 449, IRQ 124 [ 0.965797] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.965805] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.965812] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.966215] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 0.966218] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.966220] usb usb2: Product: xHCI Host Controller [ 0.966222] usb usb2: Manufacturer: Linux 5.8.0-43-generic xhci-hcd [ 0.966224] usb usb2: SerialNumber: 0000:00:14.0 [ 0.966923] hub 2-0:1.0: USB hub found [ 0.966937] hub 2-0:1.0: 6 ports detected [ 1.008298] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 1.008786] ahci 0000:00:17.0: version 3.0 [ 1.009997] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 1.018806] i2c_hid i2c-DELL078A:00: supply vdd not found, using dummy regulator [ 1.018833] i2c_hid i2c-DELL078A:00: supply vddl not found, using dummy regulator [ 1.021687] i2c i2c-0: 1/2 memory slots populated (from DMI) [ 1.022027] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.023137] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.023151] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 1.023732] scsi host0: ahci [ 1.023952] scsi host1: ahci [ 1.024058] ata1: SATA max UDMA/133 abar m2048@0xd1333000 port 0xd1333100 irq 126 [ 1.024063] ata2: SATA max UDMA/133 abar m2048@0xd1333000 port 0xd1333180 irq 126 [ 1.163903] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 1.164554] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 1.303154] usb 1-5: new high-speed USB device number 2 using xhci_hcd [ 1.342206] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.344596] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.344600] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.344602] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.346682] ata1.00: ATA-10: TOSHIBA MQ04ABF100, JU000D, max UDMA/100 [ 1.346684] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.350660] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.350662] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.350664] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.352746] ata1.00: configured for UDMA/100 [ 1.353652] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ04ABF1 0D PQ: 0 ANSI: 5 [ 1.353966] sd 0:0:0:0: [sda] Drive-managed SMR disk [ 1.353972] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.353975] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.353991] sd 0:0:0:0: [sda] Write Protect is off [ 1.353993] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.354016] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.354056] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.448082] input: DELL078A:00 06CB:78F6 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL078A:00/0018:06CB:78F6.0001/input/input8 [ 1.448229] hid-generic 0018:06CB:78F6.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL078A:00 06CB:78F6] on i2c-DELL078A:00 [ 1.450347] mc: Linux media interface: v0.10 [ 1.455938] videodev: Linux video capture interface: v2.00 [ 1.461126] usb 1-5: New USB device found, idVendor=1bcf, idProduct=28c0, bcdDevice=65.05 [ 1.461128] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.461130] usb 1-5: Product: Integrated_Webcam_HD [ 1.461131] usb 1-5: Manufacturer: CN0F08KGLOG0088VB76VA02 [ 1.507043] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 1.508401] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.523251] tsc: Refined TSC clocksource calibration: 1991.999 MHz [ 1.523265] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d4ffc055, max_idle_ns: 881590662783 ns [ 1.523368] clocksource: Switched to clocksource tsc [ 1.587157] usb 1-8: new full-speed USB device number 3 using xhci_hcd [ 1.608191] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3096-006, fw id: 2430125 [ 1.669497] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.675605] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.675610] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.675614] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.676703] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C3, max UDMA/100 [ 1.684572] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.684578] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.684594] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.685544] ata2.00: configured for UDMA/100 [ 1.690459] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A1C3 PQ: 0 ANSI: 5 [ 1.698628] input: Synaptics TM3096-006 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL078A:00/0018:06CB:78F6.0001/input/input10 [ 1.699263] hid-rmi 0018:06CB:78F6.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL078A:00 06CB:78F6] on i2c-DELL078A:00 [ 1.737623] usb 1-8: New USB device found, idVendor=0cf3, idProduct=e009, bcdDevice= 0.01 [ 1.737629] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.761373] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.761377] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.788026] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.788313] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.717677] fbcon: Taking over console [ 2.717832] Console: switching to colour frame buffer device 170x48 [ 2.772768] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.437893] systemd[1]: Inserted module 'autofs4' [ 4.593213] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 4.611586] systemd[1]: Detected architecture x86-64. [ 4.639056] systemd[1]: Set hostname to . [ 6.633136] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 7.225246] systemd[1]: Created slice system-modprobe.slice. [ 7.225687] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 7.226014] systemd[1]: Created slice User and Session Slice. [ 7.226136] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.226437] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.226513] systemd[1]: Reached target User and Group Name Lookups. [ 7.226543] systemd[1]: Reached target Remote File Systems. [ 7.226561] systemd[1]: Reached target Slices. [ 7.226773] systemd[1]: Listening on Syslog Socket. [ 7.226939] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.227031] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.227368] systemd[1]: Listening on Journal Audit Socket. [ 7.227523] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.227716] systemd[1]: Listening on Journal Socket. [ 7.227888] systemd[1]: Listening on udev Control Socket. [ 7.228017] systemd[1]: Listening on udev Kernel Socket. [ 7.229344] systemd[1]: Mounting Huge Pages File System... [ 7.230650] systemd[1]: Mounting POSIX Message Queue File System... [ 7.232771] systemd[1]: Mounting Kernel Debug File System... [ 7.234609] systemd[1]: Mounting Kernel Trace File System... [ 7.236621] systemd[1]: Starting Journal Service... [ 7.238142] systemd[1]: Starting Set the console keyboard layout... [ 7.240045] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 7.241677] systemd[1]: Starting Load Kernel Module drm... [ 7.291638] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 7.291692] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 7.306878] systemd[1]: Starting Load Kernel Modules... [ 7.308552] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.310335] systemd[1]: Starting udev Coldplug all Devices... [ 7.311745] systemd[1]: Starting Uncomplicated firewall... [ 7.314610] systemd[1]: Mounted Huge Pages File System. [ 7.314799] systemd[1]: Mounted POSIX Message Queue File System. [ 7.314978] systemd[1]: Mounted Kernel Debug File System. [ 7.315175] systemd[1]: Mounted Kernel Trace File System. [ 7.315788] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 7.448296] systemd[1]: Finished Uncomplicated firewall. [ 7.469357] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 7.478429] systemd[1]: Finished Remount Root and Kernel File Systems. [ 7.483874] systemd[1]: Activating swap /swapfile... [ 7.484952] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 7.485394] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 7.491248] systemd[1]: Starting Load/Save Random Seed... [ 7.497020] systemd[1]: Starting Create System Users... [ 7.600106] systemd[1]: Finished udev Coldplug all Devices. [ 7.608420] lp: driver loaded but no devices found [ 7.612984] ppdev: user-space parallel port driver [ 7.721162] systemd[1]: modprobe@drm.service: Succeeded. [ 7.721701] systemd[1]: Finished Load Kernel Module drm. [ 7.751119] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 7.751213] systemd[1]: Activated swap /swapfile. [ 7.751273] systemd[1]: Reached target Swap. [ 7.760341] systemd[1]: Finished Load Kernel Modules. [ 7.761884] systemd[1]: Mounting FUSE Control File System... [ 7.763308] systemd[1]: Mounting Kernel Configuration File System... [ 7.764708] systemd[1]: Starting Apply Kernel Variables... [ 7.766495] systemd[1]: Mounted FUSE Control File System. [ 7.769357] systemd[1]: Mounted Kernel Configuration File System. [ 7.795267] systemd[1]: Finished Set the console keyboard layout. [ 7.863914] systemd[1]: Started Journal Service. [ 7.886885] systemd-journald[262]: Received client request to flush runtime journal. [ 12.111741] pstore: Using crash dump compression: deflate [ 12.111758] pstore: Registered efi as persistent store backend [ 12.504837] mei_me 0000:00:16.0: enabling device (0004 -> 0006) [ 12.769643] checking generic (c0000000 408000) vs hw (d0000000 1000000) [ 12.769646] checking generic (c0000000 408000) vs hw (c0000000 10000000) [ 12.769647] fb0: switching to inteldrmfb from EFI VGA [ 12.769772] Console: switching to colour dummy device 80x25 [ 12.769823] i915 0000:00:02.0: vgaarb: deactivate vga console [ 12.776073] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 12.776878] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 13.261282] acpi INT33D5:00: intel-hid: created platform device [ 13.261519] input: Intel HID events as /devices/platform/INT33D5:00/input/input11 [ 13.269945] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12 [ 13.799473] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 13.802944] intel_rapl_common: Found RAPL domain package [ 13.802946] intel_rapl_common: Found RAPL domain dram [ 13.803058] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI [ 13.973253] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0 [ 13.976070] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.977506] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13 [ 13.981954] fbcon: i915drmfb (fb0) is primary device [ 13.982034] Console: switching to colour frame buffer device 170x48 [ 13.982083] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 14.081682] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 14.159115] psmouse serio1: Failed to deactivate mouse on isa0060/serio1: -5 [ 14.195041] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 14.195044] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 14.195045] RAPL PMU: hw unit of domain package 2^-14 Joules [ 14.195046] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 14.195047] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 14.195048] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 14.318069] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [ 14.523257] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 14.523755] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 14.639153] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 14.926901] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.927336] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 15.219778] cryptd: max_cpu_qlen set to 1000 [ 15.561757] Bluetooth: Core ver 2.22 [ 15.561776] NET: Registered protocol family 31 [ 15.561777] Bluetooth: HCI device and connection manager initialized [ 15.561781] Bluetooth: HCI socket layer initialized [ 15.561783] Bluetooth: L2CAP socket layer initialized [ 15.561785] Bluetooth: SCO socket layer initialized [ 15.710204] AVX2 version of gcm_enc/dec engaged. [ 15.710207] AES CTR mode by8 optimization enabled [ 15.815392] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 15.817929] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 15.859531] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 15.859535] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.859538] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 15.859540] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 15.859541] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 15.859544] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 15.859546] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 15.859548] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 15.951174] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [ 15.951191] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 15.951202] pcieport 0000:00:1c.0: AER: device [8086:9d14] error status/mask=00000081/00002000 [ 15.951210] pcieport 0000:00:1c.0: AER: [ 0] RxErr [ 15.951217] pcieport 0000:00:1c.0: AER: [ 7] BadDLLP [ 15.951231] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [ 15.951243] pcieport 0000:00:1c.0: AER: can't find device of ID00e0 [ 15.983467] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [ 15.983476] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 15.983480] pcieport 0000:00:1c.0: AER: device [8086:9d14] error status/mask=00000001/00002000 [ 15.983487] pcieport 0000:00:1c.0: AER: [ 0] RxErr [ 15.983494] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [ 15.983499] pcieport 0000:00:1c.0: AER: can't find device of ID00e0 [ 15.983501] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [ 15.983506] pcieport 0000:00:1c.0: AER: can't find device of ID00e0 [ 15.983508] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [ 15.983513] pcieport 0000:00:1c.0: AER: can't find device of ID00e0 [ 15.983515] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 [ 15.983520] pcieport 0000:00:1c.0: AER: can't find device of ID00e0 [ 16.207902] ath10k_pci 0000:01:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1028:1810 [ 16.207909] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 16.209628] ath10k_pci 0000:01:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877 [ 16.340546] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:28c0) [ 16.359716] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14 [ 16.359968] usbcore: registered new interface driver uvcvideo [ 16.359971] USB Video Class driver (1.1.1) [ 16.532259] intel_rapl_common: Found RAPL domain package [ 16.532263] intel_rapl_common: Found RAPL domain core [ 16.532266] intel_rapl_common: Found RAPL domain uncore [ 16.532269] intel_rapl_common: Found RAPL domain dram [ 16.626353] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a [ 16.720371] ath10k_pci 0000:01:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 16.801954] ath: EEPROM regdomain: 0x6c [ 16.801957] ath: EEPROM indicates we should expect a direct regpair map [ 16.801961] ath: Country alpha2 being used: 00 [ 16.801963] ath: Regpair used: 0x6c [ 16.984196] usbcore: registered new interface driver btusb [ 17.128046] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 17.128287] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 17.128502] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 17.128710] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 17.128926] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 17.129141] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 17.492950] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0 [ 17.887527] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 17.887535] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 17.961233] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 18.935358] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7 [ 19.139292] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 28.989067] audit: type=1400 audit(1613668504.938:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=850 comm="apparmor_parser" [ 28.989267] audit: type=1400 audit(1613668504.938:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=849 comm="apparmor_parser" [ 28.990373] audit: type=1400 audit(1613668504.938:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=851 comm="apparmor_parser" [ 28.990376] audit: type=1400 audit(1613668504.938:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=851 comm="apparmor_parser" [ 28.995086] audit: type=1400 audit(1613668504.942:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=848 comm="apparmor_parser" [ 28.995090] audit: type=1400 audit(1613668504.942:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=848 comm="apparmor_parser" [ 29.145929] audit: type=1400 audit(1613668505.094:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=855 comm="apparmor_parser" [ 29.269296] audit: type=1400 audit(1613668505.218:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=856 comm="apparmor_parser" [ 29.292612] audit: type=1400 audit(1613668505.242:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=858 comm="apparmor_parser" [ 29.303965] audit: type=1400 audit(1613668505.254:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=854 comm="apparmor_parser" [ 40.035486] kauditd_printk_skb: 65 callbacks suppressed [ 40.035492] audit: type=1400 audit(1613668515.986:77): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1056 comm="cups-browsed" capability=23 capname="sys_nice" [ 40.135792] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 40.135801] Bluetooth: BNEP filters: protocol multicast [ 40.135813] Bluetooth: BNEP socket layer initialized [ 40.412336] NET: Registered protocol family 38 [ 44.772298] RTL8208 Fast Ethernet r8169-200:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 45.032553] r8169 0000:02:00.0 enp2s0: Link is Down [ 45.041063] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [ 45.041071] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 45.041074] pcieport 0000:00:1c.0: AER: device [8086:9d14] error status/mask=00000001/00002000 [ 45.041077] pcieport 0000:00:1c.0: AER: [ 0] RxErr [ 45.077174] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [ 45.077193] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 45.077206] pcieport 0000:00:1c.0: AER: device [8086:9d14] error status/mask=00000001/00002000 [ 45.077214] pcieport 0000:00:1c.0: AER: [ 0] RxErr [ 51.045299] wlp1s0: authenticate with 74:83:c2:8d:ba:1d [ 51.080992] wlp1s0: send auth to 74:83:c2:8d:ba:1d (try 1/3) [ 51.084332] wlp1s0: authenticated [ 51.087218] wlp1s0: associate with 74:83:c2:8d:ba:1d (try 1/3) [ 51.092615] wlp1s0: RX AssocResp from 74:83:c2:8d:ba:1d (capab=0x431 status=0 aid=2) [ 51.095353] wlp1s0: associated [ 51.323897] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 57.760828] Bluetooth: RFCOMM TTY layer initialized [ 57.760845] Bluetooth: RFCOMM socket layer initialized [ 57.760866] Bluetooth: RFCOMM ver 1.11 [ 85.335482] rfkill: input handler disabled [ 87.084381] audit: type=1400 audit(1613668563.034:78): apparmor="DENIED" operation="capable" profile="/usr/lib/snapd/snap-confine" pid=1805 comm="snap-confine" capability=4 capname="fsetid" [ 88.446296] wlp1s0: disconnect from AP 74:83:c2:8d:ba:1d for new auth to 80:e0:1d:ab:72:f0 [ 88.452639] wlp1s0: authenticate with 80:e0:1d:ab:72:f0 [ 88.489851] wlp1s0: send auth to 80:e0:1d:ab:72:f0 (try 1/3) [ 88.491053] wlp1s0: authenticated [ 88.495125] wlp1s0: associate with 80:e0:1d:ab:72:f0 (try 1/3) [ 88.498499] wlp1s0: RX ReassocResp from 80:e0:1d:ab:72:f0 (capab=0x431 status=0 aid=172) [ 88.500975] wlp1s0: associated [ 88.501090] ath: EEPROM regdomain: 0x8194 [ 88.501091] ath: EEPROM indicates we should expect a country code [ 88.501092] ath: doing EEPROM country->regdmn map search [ 88.501094] ath: country maps to regdmn code: 0x52 [ 88.501095] ath: Country alpha2 being used: KE [ 88.501096] ath: Regpair used: 0x52 [ 88.501097] ath: regdomain 0x8194 dynamically updated by country element [ 88.597932] wlp1s0: Limiting TX power to 14 dBm as advertised by 80:e0:1d:ab:72:f0 [ 93.981340] audit: type=1326 audit(1613668569.930:79): auid=1000 uid=1000 gid=1000 ses=2 subj=snap.snap-store.ubuntu-software pid=1805 comm="snap-store" exe="/snap/snap-store/518/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f2ff7229639 code=0x50000 [ 94.722541] audit: type=1107 audit(1613668570.670:80): pid=931 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/NetworkManager" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.13" pid=1805 label="snap.snap-store.ubuntu-software" peer_pid=932 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' [ 98.035017] audit: type=1107 audit(1613668573.982:81): pid=931 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.10" pid=1805 label="snap.snap-store.ubuntu-software" peer_pid=944 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' [ 98.035723] audit: type=1107 audit(1613668573.986:82): pid=931 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.10" pid=1805 label="snap.snap-store.ubuntu-software" peer_pid=944 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' [ 98.424810] audit: type=1107 audit(1613668574.374:83): pid=931 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.10" pid=1805 label="snap.snap-store.ubuntu-software" peer_pid=944 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' [ 98.425774] audit: type=1107 audit(1613668574.374:84): pid=931 uid=103 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.10" pid=1805 label="snap.snap-store.ubuntu-software" peer_pid=944 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' [ 100.621816] audit: type=1400 audit(1613668576.570:85): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=1805 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 218.708132] wlp1s0: disconnect from AP 80:e0:1d:ab:72:f0 for new auth to 78:8a:20:22:d1:10 [ 218.725583] wlp1s0: authenticate with 78:8a:20:22:d1:10 [ 218.758547] wlp1s0: send auth to 78:8a:20:22:d1:10 (try 1/3) [ 218.762472] wlp1s0: authenticated [ 218.779178] wlp1s0: associate with 78:8a:20:22:d1:10 (try 1/3) [ 218.781727] wlp1s0: RX ReassocResp from 78:8a:20:22:d1:10 (capab=0x411 status=0 aid=5) [ 218.784687] wlp1s0: associated [ 268.207949] wlp1s0: deauthenticating from 78:8a:20:22:d1:10 by local choice (Reason: 3=DEAUTH_LEAVING) [ 279.839366] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [ 279.839393] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 279.839411] pcieport 0000:00:1c.0: AER: device [8086:9d14] error status/mask=00000001/00002000 [ 279.839426] pcieport 0000:00:1c.0: AER: [ 0] RxErr [ 279.876971] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [ 279.876979] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 279.876983] pcieport 0000:00:1c.0: AER: device [8086:9d14] error status/mask=00000001/00002000 [ 279.876986] pcieport 0000:00:1c.0: AER: [ 0] RxErr [ 285.080698] wlp1s0: authenticate with 78:8a:20:22:d2:48 [ 285.118701] wlp1s0: send auth to 78:8a:20:22:d2:48 (try 1/3) [ 285.121661] wlp1s0: authenticated [ 285.123226] wlp1s0: associate with 78:8a:20:22:d2:48 (try 1/3) [ 285.128896] wlp1s0: RX AssocResp from 78:8a:20:22:d2:48 (capab=0x411 status=0 aid=1) [ 285.131556] wlp1s0: associated [ 285.135642] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 322.182735] wlp1s0: disconnect from AP 78:8a:20:22:d2:48 for new auth to 80:e0:1d:ab:72:f0 [ 322.189826] wlp1s0: authenticate with 80:e0:1d:ab:72:f0 [ 322.227664] wlp1s0: send auth to 80:e0:1d:ab:72:f0 (try 1/3) [ 322.228945] wlp1s0: authenticated [ 322.235107] wlp1s0: associate with 80:e0:1d:ab:72:f0 (try 1/3) [ 322.240018] wlp1s0: RX ReassocResp from 80:e0:1d:ab:72:f0 (capab=0x431 status=0 aid=172) [ 322.242688] wlp1s0: associated [ 322.242804] ath: EEPROM regdomain: 0x8194 [ 322.242805] ath: EEPROM indicates we should expect a country code [ 322.242806] ath: doing EEPROM country->regdmn map search [ 322.242807] ath: country maps to regdmn code: 0x52 [ 322.242808] ath: Country alpha2 being used: KE [ 322.242809] ath: Regpair used: 0x52 [ 322.242810] ath: regdomain 0x8194 dynamically updated by country element [ 322.250800] wlp1s0: Limiting TX power to 14 dBm as advertised by 80:e0:1d:ab:72:f0 [ 408.487153] wlp1s0: disconnect from AP 80:e0:1d:ab:72:f0 for new auth to 78:8a:20:22:d1:10 [ 408.493645] wlp1s0: authenticate with 78:8a:20:22:d1:10 [ 408.526045] wlp1s0: send auth to 78:8a:20:22:d1:10 (try 1/3) [ 408.530999] wlp1s0: authenticated [ 408.535118] wlp1s0: associate with 78:8a:20:22:d1:10 (try 1/3) [ 408.541235] wlp1s0: RX ReassocResp from 78:8a:20:22:d1:10 (capab=0x411 status=0 aid=4) [ 408.543724] wlp1s0: associated [ 444.996381] wlp1s0: disconnect from AP 78:8a:20:22:d1:10 for new auth to 74:83:c2:8d:ba:1d [ 445.002602] wlp1s0: authenticate with 74:83:c2:8d:ba:1d [ 445.037445] wlp1s0: send auth to 74:83:c2:8d:ba:1d (try 1/3) [ 445.143263] wlp1s0: send auth to 74:83:c2:8d:ba:1d (try 2/3) [ 445.146584] wlp1s0: authenticated [ 445.155260] wlp1s0: associate with 74:83:c2:8d:ba:1d (try 1/3) [ 445.160770] wlp1s0: RX ReassocResp from 74:83:c2:8d:ba:1d (capab=0x431 status=0 aid=1) [ 445.164471] wlp1s0: associated [ 482.259235] wlp1s0: disconnect from AP 74:83:c2:8d:ba:1d for new auth to 78:8a:20:22:d1:10 [ 482.266789] wlp1s0: authenticate with 78:8a:20:22:d1:10 [ 482.299685] wlp1s0: send auth to 78:8a:20:22:d1:10 (try 1/3) [ 482.303579] wlp1s0: authenticated [ 482.307099] wlp1s0: associate with 78:8a:20:22:d1:10 (try 1/3) [ 482.309110] wlp1s0: RX ReassocResp from 78:8a:20:22:d1:10 (capab=0x411 status=0 aid=4) [ 482.311384] wlp1s0: associated [ 773.921226] wlp1s0: disconnect from AP 78:8a:20:22:d1:10 for new auth to 78:8a:20:21:d1:10 [ 773.927910] wlp1s0: authenticate with 78:8a:20:21:d1:10 [ 773.962736] wlp1s0: send auth to 78:8a:20:21:d1:10 (try 1/3) [ 773.968599] wlp1s0: authenticated [ 773.971121] wlp1s0: associate with 78:8a:20:21:d1:10 (try 1/3) [ 773.981171] wlp1s0: RX ReassocResp from 78:8a:20:21:d1:10 (capab=0x431 status=0 aid=17) [ 773.983383] wlp1s0: associated [ 789.236719] wlp1s0: disconnect from AP 78:8a:20:21:d1:10 for new auth to 78:8a:20:22:d1:10 [ 789.244583] wlp1s0: authenticate with 78:8a:20:22:d1:10 [ 789.278152] wlp1s0: send auth to 78:8a:20:22:d1:10 (try 1/3) [ 789.280296] wlp1s0: authenticated [ 789.291113] wlp1s0: associate with 78:8a:20:22:d1:10 (try 1/3) [ 789.294685] wlp1s0: RX ReassocResp from 78:8a:20:22:d1:10 (capab=0x411 status=0 aid=4) [ 789.298354] wlp1s0: associated [ 844.092227] wlp1s0: disconnect from AP 78:8a:20:22:d1:10 for new auth to 80:e0:1d:ab:72:ff [ 844.098557] wlp1s0: authenticate with 80:e0:1d:ab:72:ff [ 844.141702] wlp1s0: send auth to 80:e0:1d:ab:72:ff (try 1/3) [ 844.143051] wlp1s0: send auth to 80:e0:1d:ab:72:ff (try 2/3) [ 844.144530] wlp1s0: send auth to 80:e0:1d:ab:72:ff (try 3/3) [ 844.145839] wlp1s0: authentication with 80:e0:1d:ab:72:ff timed out [ 844.567790] wlp1s0: authenticate with 80:e0:1d:ab:72:f0 [ 844.605978] wlp1s0: send auth to 80:e0:1d:ab:72:f0 (try 1/3) [ 844.610773] wlp1s0: send auth to 80:e0:1d:ab:72:f0 (try 2/3) [ 844.615653] wlp1s0: send auth to 80:e0:1d:ab:72:f0 (try 3/3) [ 844.620388] wlp1s0: authentication with 80:e0:1d:ab:72:f0 timed out [ 845.054177] wlp1s0: authenticate with 74:83:c2:8d:ba:1d [ 845.105420] wlp1s0: send auth to 74:83:c2:8d:ba:1d (try 1/3) [ 845.109328] wlp1s0: authenticated [ 845.111127] wlp1s0: associate with 74:83:c2:8d:ba:1d (try 1/3) [ 845.223231] wlp1s0: associate with 74:83:c2:8d:ba:1d (try 2/3) [ 845.228442] wlp1s0: RX AssocResp from 74:83:c2:8d:ba:1d (capab=0x431 status=0 aid=1) [ 845.231665] wlp1s0: associated [ 882.369079] wlp1s0: disconnect from AP 74:83:c2:8d:ba:1d for new auth to 78:8a:20:22:d1:10 [ 882.378565] wlp1s0: authenticate with 78:8a:20:22:d1:10 [ 882.412613] wlp1s0: send auth to 78:8a:20:22:d1:10 (try 1/3) [ 882.415371] wlp1s0: authenticated [ 882.423130] wlp1s0: associate with 78:8a:20:22:d1:10 (try 1/3) [ 882.427456] wlp1s0: RX ReassocResp from 78:8a:20:22:d1:10 (capab=0x411 status=0 aid=4) [ 882.430809] wlp1s0: associated [ 1324.757308] wlp1s0: disconnect from AP 78:8a:20:22:d1:10 for new auth to 80:e0:1d:ab:72:f0 [ 1324.769503] wlp1s0: authenticate with 80:e0:1d:ab:72:f0 [ 1324.807164] wlp1s0: send auth to 80:e0:1d:ab:72:f0 (try 1/3) [ 1324.810550] wlp1s0: authenticated [ 1324.811341] wlp1s0: associate with 80:e0:1d:ab:72:f0 (try 1/3) [ 1324.814694] wlp1s0: RX ReassocResp from 80:e0:1d:ab:72:f0 (capab=0x431 status=0 aid=182) [ 1324.817247] wlp1s0: associated [ 1324.817376] ath: EEPROM regdomain: 0x8194 [ 1324.817377] ath: EEPROM indicates we should expect a country code [ 1324.817378] ath: doing EEPROM country->regdmn map search [ 1324.817379] ath: country maps to regdmn code: 0x52 [ 1324.817380] ath: Country alpha2 being used: KE [ 1324.817380] ath: Regpair used: 0x52 [ 1324.817382] ath: regdomain 0x8194 dynamically updated by country element [ 1324.859617] wlp1s0: Limiting TX power to 14 dBm as advertised by 80:e0:1d:ab:72:f0 [ 1359.834775] wlp1s0: disconnect from AP 80:e0:1d:ab:72:f0 for new auth to 78:8a:20:22:d1:10 [ 1359.843711] wlp1s0: authenticate with 78:8a:20:22:d1:10 [ 1359.876544] wlp1s0: send auth to 78:8a:20:22:d1:10 (try 1/3) [ 1359.881415] wlp1s0: authenticated [ 1359.891092] wlp1s0: associate with 78:8a:20:22:d1:10 (try 1/3) [ 1359.918323] wlp1s0: RX ReassocResp from 78:8a:20:22:d1:10 (capab=0x411 status=0 aid=4) [ 1359.924465] wlp1s0: associated [ 1843.630450] wlp1s0: disconnect from AP 78:8a:20:22:d1:10 for new auth to 80:e0:1d:ab:72:f0 [ 1843.638724] wlp1s0: authenticate with 80:e0:1d:ab:72:f0 [ 1843.676934] wlp1s0: send auth to 80:e0:1d:ab:72:f0 (try 1/3) [ 1843.678877] wlp1s0: authenticated [ 1843.683046] wlp1s0: associate with 80:e0:1d:ab:72:f0 (try 1/3) [ 1843.687974] wlp1s0: RX ReassocResp from 80:e0:1d:ab:72:f0 (capab=0x431 status=0 aid=189) [ 1843.692965] wlp1s0: associated [ 1843.693425] ath: EEPROM regdomain: 0x8194 [ 1843.693430] ath: EEPROM indicates we should expect a country code [ 1843.693435] ath: doing EEPROM country->regdmn map search [ 1843.693439] ath: country maps to regdmn code: 0x52 [ 1843.693444] ath: Country alpha2 being used: KE [ 1843.693447] ath: Regpair used: 0x52 [ 1843.693453] ath: regdomain 0x8194 dynamically updated by country element [ 1843.763689] wlp1s0: Limiting TX power to 14 dBm as advertised by 80:e0:1d:ab:72:f0 [ 1877.519445] wlp1s0: disconnect from AP 80:e0:1d:ab:72:f0 for new auth to 78:8a:20:22:d1:10 [ 1877.532843] wlp1s0: authenticate with 78:8a:20:22:d1:10 [ 1877.565736] wlp1s0: send auth to 78:8a:20:22:d1:10 (try 1/3) [ 1877.577469] wlp1s0: authenticated [ 1877.587047] wlp1s0: associate with 78:8a:20:22:d1:10 (try 1/3) [ 1877.589150] wlp1s0: RX ReassocResp from 78:8a:20:22:d1:10 (capab=0x411 status=0 aid=4) [ 1877.593240] wlp1s0: associated [ 2062.569387] wlp1s0: disconnect from AP 78:8a:20:22:d1:10 for new auth to 80:e0:1d:ab:72:f0 [ 2062.576066] wlp1s0: authenticate with 80:e0:1d:ab:72:f0 [ 2062.614542] wlp1s0: send auth to 80:e0:1d:ab:72:f0 (try 1/3) [ 2062.615749] wlp1s0: authenticated [ 2062.623038] wlp1s0: associate with 80:e0:1d:ab:72:f0 (try 1/3) [ 2062.626568] wlp1s0: RX ReassocResp from 80:e0:1d:ab:72:f0 (capab=0x431 status=0 aid=189) [ 2062.639944] wlp1s0: associated [ 2062.640340] ath: EEPROM regdomain: 0x8194 [ 2062.640344] ath: EEPROM indicates we should expect a country code [ 2062.640348] ath: doing EEPROM country->regdmn map search [ 2062.640353] ath: country maps to regdmn code: 0x52 [ 2062.640358] ath: Country alpha2 being used: KE [ 2062.640360] ath: Regpair used: 0x52 [ 2062.640366] ath: regdomain 0x8194 dynamically updated by country element [ 2062.689316] wlp1s0: Limiting TX power to 14 dBm as advertised by 80:e0:1d:ab:72:f0 [ 2096.411132] wlp1s0: disconnect from AP 80:e0:1d:ab:72:f0 for new auth to 78:8a:20:22:d1:10 [ 2096.418281] wlp1s0: authenticate with 78:8a:20:22:d1:10 [ 2096.450923] wlp1s0: send auth to 78:8a:20:22:d1:10 (try 1/3) [ 2096.456053] wlp1s0: authenticated [ 2096.458989] wlp1s0: associate with 78:8a:20:22:d1:10 (try 1/3) [ 2096.462106] wlp1s0: RX ReassocResp from 78:8a:20:22:d1:10 (capab=0x411 status=0 aid=4) [ 2096.465764] wlp1s0: associated [ 2488.055307] wlp1s0: disconnect from AP 78:8a:20:22:d1:10 for new auth to 78:8a:20:21:d1:10 [ 2488.062629] wlp1s0: authenticate with 78:8a:20:21:d1:10 [ 2488.097622] wlp1s0: send auth to 78:8a:20:21:d1:10 (try 1/3) [ 2488.106180] wlp1s0: authenticated [ 2488.111006] wlp1s0: associate with 78:8a:20:21:d1:10 (try 1/3) [ 2488.131182] wlp1s0: associate with 78:8a:20:21:d1:10 (try 2/3) [ 2488.144196] wlp1s0: associate with 78:8a:20:21:d1:10 (try 3/3) [ 2488.156928] wlp1s0: association with 78:8a:20:21:d1:10 timed out [ 2488.705732] wlp1s0: authenticate with 74:83:c2:8d:ba:1d [ 2488.757085] wlp1s0: send auth to 74:83:c2:8d:ba:1d (try 1/3) [ 2488.761908] wlp1s0: authenticated [ 2488.763033] wlp1s0: associate with 74:83:c2:8d:ba:1d (try 1/3) [ 2488.867107] wlp1s0: associate with 74:83:c2:8d:ba:1d (try 2/3) [ 2488.871326] wlp1s0: RX AssocResp from 74:83:c2:8d:ba:1d (capab=0x431 status=0 aid=1) [ 2488.874893] wlp1s0: associated [ 2525.924849] wlp1s0: disconnect from AP 74:83:c2:8d:ba:1d for new auth to 78:8a:20:22:d1:10 [ 2525.931657] wlp1s0: authenticate with 78:8a:20:22:d1:10 [ 2525.963908] wlp1s0: send auth to 78:8a:20:22:d1:10 (try 1/3) [ 2525.968196] wlp1s0: authenticated [ 2525.971074] wlp1s0: associate with 78:8a:20:22:d1:10 (try 1/3) [ 2525.974139] wlp1s0: RX ReassocResp from 78:8a:20:22:d1:10 (capab=0x411 status=0 aid=4) [ 2525.977492] wlp1s0: associated [ 2580.543426] wlp1s0: disconnect from AP 78:8a:20:22:d1:10 for new auth to 80:e0:1d:ab:72:f0 [ 2580.549400] wlp1s0: authenticate with 80:e0:1d:ab:72:f0 [ 2580.603578] wlp1s0: send auth to 80:e0:1d:ab:72:f0 (try 1/3) [ 2580.605125] wlp1s0: authenticated [ 2580.607100] wlp1s0: associate with 80:e0:1d:ab:72:f0 (try 1/3) [ 2580.611490] wlp1s0: RX ReassocResp from 80:e0:1d:ab:72:f0 (capab=0x431 status=0 aid=5) [ 2580.615183] wlp1s0: associated [ 2580.615491] ath: EEPROM regdomain: 0x8194 [ 2580.615494] ath: EEPROM indicates we should expect a country code [ 2580.615497] ath: doing EEPROM country->regdmn map search [ 2580.615500] ath: country maps to regdmn code: 0x52 [ 2580.615502] ath: Country alpha2 being used: KE [ 2580.615504] ath: Regpair used: 0x52 [ 2580.615508] ath: regdomain 0x8194 dynamically updated by country element [ 2580.653321] wlp1s0: Limiting TX power to 14 dBm as advertised by 80:e0:1d:ab:72:f0 [ 2930.403671] wlp1s0: authenticate with 80:e0:1d:ab:72:f0 [ 2930.457110] wlp1s0: send auth to 80:e0:1d:ab:72:f0 (try 1/3) [ 2930.470512] wlp1s0: send auth to 80:e0:1d:ab:72:f0 (try 2/3) [ 2930.475279] wlp1s0: send auth to 80:e0:1d:ab:72:f0 (try 3/3) [ 2930.479925] wlp1s0: authentication with 80:e0:1d:ab:72:f0 timed out [ 3104.936070] wlp1s0: authenticate with 78:8a:20:24:a7:c5 [ 3104.989385] wlp1s0: send auth to 78:8a:20:24:a7:c5 (try 1/3) [ 3104.994246] wlp1s0: send auth to 78:8a:20:24:a7:c5 (try 2/3) [ 3104.999104] wlp1s0: send auth to 78:8a:20:24:a7:c5 (try 3/3) [ 3105.003913] wlp1s0: authentication with 78:8a:20:24:a7:c5 timed out [ 3130.620166] wlp1s0: authenticate with 78:8a:20:24:a7:c5 [ 3130.677375] wlp1s0: send auth to 78:8a:20:24:a7:c5 (try 1/3) [ 3130.682048] wlp1s0: send auth to 78:8a:20:24:a7:c5 (try 2/3) [ 3130.686883] wlp1s0: send auth to 78:8a:20:24:a7:c5 (try 3/3) [ 3130.692953] wlp1s0: authenticated [ 3130.695020] wlp1s0: associate with 78:8a:20:24:a7:c5 (try 1/3) [ 3130.705399] wlp1s0: RX AssocResp from 78:8a:20:24:a7:c5 (capab=0x431 status=0 aid=1) [ 3130.708811] wlp1s0: associated [ 3134.709243] wlp1s0: deauthenticated from 78:8a:20:24:a7:c5 (Reason: 2=PREV_AUTH_NOT_VALID) [ 3313.635875] perf: interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 79250 [ 3448.142950] usb usb1-port5: over-current condition [ 3448.142970] usb 1-5: USB disconnect, device number 2 [ 3448.395065] usb usb1-port6: over-current condition [ 3451.731004] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 3451.887684] usb 1-5: New USB device found, idVendor=1bcf, idProduct=28c0, bcdDevice=65.05 [ 3451.887688] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3451.887690] usb 1-5: Product: Integrated_Webcam_HD [ 3451.887693] usb 1-5: Manufacturer: CN0F08KGLOG0088VB76VA02 [ 3451.891477] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:28c0) [ 3451.913263] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input21 [ 3457.763055] usb 1-3: new low-speed USB device number 5 using xhci_hcd [ 3458.099129] usb 1-3: device descriptor read/64, error -71 [ 3458.543002] usb 1-3: device descriptor read/64, error -71 [ 3458.779039] usb 1-3: new low-speed USB device number 6 using xhci_hcd [ 3459.115292] usb 1-3: device descriptor read/64, error -71 [ 3459.559307] usb 1-3: device descriptor read/64, error -71 [ 3459.667148] usb usb1-port3: attempt power cycle [ 3460.319038] usb 1-3: new low-speed USB device number 7 using xhci_hcd [ 3460.319397] usb 1-3: Device not responding to setup address. [ 3460.527095] usb 1-3: Device not responding to setup address. [ 3460.735043] usb 1-3: device not accepting address 7, error -71 [ 3461.070994] usb 1-3: new low-speed USB device number 8 using xhci_hcd [ 3461.071241] usb 1-3: Device not responding to setup address. [ 3461.279265] usb 1-3: Device not responding to setup address. [ 3461.486934] usb 1-3: device not accepting address 8, error -71 [ 3461.487132] usb usb1-port3: unable to enumerate USB device [ 3461.759059] usb 1-3: new low-speed USB device number 9 using xhci_hcd [ 3462.095096] usb 1-3: device descriptor read/64, error -71 [ 3462.539079] usb 1-3: device descriptor read/64, error -71 [ 3462.775044] usb 1-3: new low-speed USB device number 10 using xhci_hcd [ 3463.114969] usb 1-3: device descriptor read/64, error -71 [ 3463.559077] usb 1-3: device descriptor read/64, error -71 [ 3463.667079] usb usb1-port3: attempt power cycle [ 3464.319041] usb 1-3: new low-speed USB device number 11 using xhci_hcd [ 3464.319610] usb 1-3: Device not responding to setup address. [ 3464.527320] usb 1-3: Device not responding to setup address. [ 3464.735043] usb 1-3: device not accepting address 11, error -71 [ 3465.071050] usb 1-3: new low-speed USB device number 12 using xhci_hcd [ 3465.071334] usb 1-3: Device not responding to setup address. [ 3465.279091] usb 1-3: Device not responding to setup address. [ 3465.487011] usb 1-3: device not accepting address 12, error -71 [ 3465.487176] usb usb1-port3: unable to enumerate USB device [ 3465.759053] usb 1-3: new low-speed USB device number 13 using xhci_hcd [ 3466.095067] usb 1-3: device descriptor read/64, error -71 [ 3466.539088] usb 1-3: device descriptor read/64, error -71 [ 3466.775054] usb 1-3: new low-speed USB device number 14 using xhci_hcd [ 3467.110959] usb 1-3: device descriptor read/64, error -71 [ 3467.555080] usb 1-3: device descriptor read/64, error -71 [ 3467.663155] usb usb1-port3: attempt power cycle [ 3468.315063] usb 1-3: new low-speed USB device number 15 using xhci_hcd [ 3468.315330] usb 1-3: Device not responding to setup address. [ 3468.523095] usb 1-3: Device not responding to setup address. [ 3468.731037] usb 1-3: device not accepting address 15, error -71 [ 3469.066943] usb 1-3: new low-speed USB device number 16 using xhci_hcd [ 3469.067234] usb 1-3: Device not responding to setup address. [ 3469.275069] usb 1-3: Device not responding to setup address. [ 3469.483047] usb 1-3: device not accepting address 16, error -71 [ 3469.483216] usb usb1-port3: unable to enumerate USB device [ 3469.755069] usb 1-3: new low-speed USB device number 17 using xhci_hcd [ 3470.091080] usb 1-3: device descriptor read/64, error -71 [ 3470.535088] usb 1-3: device descriptor read/64, error -71 [ 3470.770985] usb 1-3: new low-speed USB device number 18 using xhci_hcd [ 3471.107081] usb 1-3: device descriptor read/64, error -71 [ 3471.555084] usb 1-3: device descriptor read/64, error -71 [ 3471.663166] usb usb1-port3: attempt power cycle [ 3472.315048] usb 1-3: new low-speed USB device number 19 using xhci_hcd [ 3472.315695] usb 1-3: Device not responding to setup address. [ 3472.523426] usb 1-3: Device not responding to setup address. [ 3472.731042] usb 1-3: device not accepting address 19, error -71 [ 3473.066965] usb 1-3: new low-speed USB device number 20 using xhci_hcd [ 3473.067275] usb 1-3: Device not responding to setup address. [ 3473.275279] usb 1-3: Device not responding to setup address. [ 3473.482950] usb 1-3: device not accepting address 20, error -71 [ 3473.483123] usb usb1-port3: unable to enumerate USB device [ 3473.755042] usb 1-3: new low-speed USB device number 21 using xhci_hcd [ 3474.091273] usb 1-3: device descriptor read/64, error -71 [ 3474.539308] usb 1-3: device descriptor read/64, error -71 [ 3474.775050] usb 1-3: new low-speed USB device number 22 using xhci_hcd [ 3475.111267] usb 1-3: device descriptor read/64, error -71 [ 3475.555274] usb 1-3: device descriptor read/64, error -71 [ 3475.663031] usb usb1-port3: attempt power cycle [ 3476.315024] usb 1-3: new low-speed USB device number 23 using xhci_hcd [ 3476.315398] usb 1-3: Device not responding to setup address. [ 3476.523260] usb 1-3: Device not responding to setup address. [ 3476.731044] usb 1-3: device not accepting address 23, error -71 [ 3477.067051] usb 1-3: new low-speed USB device number 24 using xhci_hcd [ 3477.067402] usb 1-3: Device not responding to setup address. [ 3477.275281] usb 1-3: Device not responding to setup address. [ 3477.483040] usb 1-3: device not accepting address 24, error -71 [ 3477.483172] usb usb1-port3: unable to enumerate USB device [ 3477.755050] usb 1-3: new low-speed USB device number 25 using xhci_hcd [ 3478.091010] usb 1-3: device descriptor read/64, error -71 [ 3478.539789] usb 1-3: device descriptor read/64, error -71 [ 3478.775051] usb 1-3: new low-speed USB device number 26 using xhci_hcd [ 3479.111112] usb 1-3: device descriptor read/64, error -71 [ 3479.555044] usb 1-3: device descriptor read/64, error -71 [ 3479.663151] usb usb1-port3: attempt power cycle [ 3480.315051] usb 1-3: new low-speed USB device number 27 using xhci_hcd [ 3480.315689] usb 1-3: Device not responding to setup address. [ 3480.523413] usb 1-3: Device not responding to setup address. [ 3480.731050] usb 1-3: device not accepting address 27, error -71 [ 3481.067050] usb 1-3: new low-speed USB device number 28 using xhci_hcd [ 3481.067405] usb 1-3: Device not responding to setup address. [ 3481.275266] usb 1-3: Device not responding to setup address. [ 3481.482884] usb 1-3: device not accepting address 28, error -71 [ 3481.482948] usb usb1-port3: unable to enumerate USB device [ 3481.759042] usb 1-3: new low-speed USB device number 29 using xhci_hcd [ 3482.099097] usb 1-3: device descriptor read/64, error -71 [ 3482.543252] usb 1-3: device descriptor read/64, error -71 [ 3482.779054] usb 1-3: new low-speed USB device number 30 using xhci_hcd [ 3483.115108] usb 1-3: device descriptor read/64, error -71 [ 3483.559269] usb 1-3: device descriptor read/64, error -71 [ 3483.667161] usb usb1-port3: attempt power cycle [ 3484.323048] usb 1-3: new low-speed USB device number 31 using xhci_hcd [ 3484.323413] usb 1-3: Device not responding to setup address. [ 3484.531255] usb 1-3: Device not responding to setup address. [ 3484.739040] usb 1-3: device not accepting address 31, error -71 [ 3485.074984] usb 1-3: new low-speed USB device number 32 using xhci_hcd [ 3485.075403] usb 1-3: Device not responding to setup address. [ 3485.283009] usb 1-3: Device not responding to setup address. [ 3485.491051] usb 1-3: device not accepting address 32, error -71 [ 3485.491184] usb usb1-port3: unable to enumerate USB device [ 3485.763021] usb 1-3: new low-speed USB device number 33 using xhci_hcd [ 3486.099001] usb 1-3: device descriptor read/64, error -71 [ 3486.542995] usb 1-3: device descriptor read/64, error -71 [ 3486.779053] usb 1-3: new low-speed USB device number 34 using xhci_hcd [ 3487.115107] usb 1-3: device descriptor read/64, error -71 [ 3487.559269] usb 1-3: device descriptor read/64, error -71 [ 3487.667183] usb usb1-port3: attempt power cycle [ 3488.318976] usb 1-3: new low-speed USB device number 35 using xhci_hcd [ 3488.319513] usb 1-3: Device not responding to setup address. [ 3488.527711] usb 1-3: Device not responding to setup address. [ 3488.735054] usb 1-3: device not accepting address 35, error -71 [ 3488.863035] usb 1-3: new low-speed USB device number 36 using xhci_hcd [ 3488.863410] usb 1-3: Device not responding to setup address. [ 3489.071188] usb 1-3: Device not responding to setup address. [ 3489.279042] usb 1-3: device not accepting address 36, error -71 [ 3489.279175] usb usb1-port3: unable to enumerate USB device [ 3489.551051] usb 1-3: new low-speed USB device number 37 using xhci_hcd [ 3489.887004] usb 1-3: device descriptor read/64, error -71 [ 3490.331055] usb 1-3: device descriptor read/64, error -71 [ 3490.566924] usb 1-3: new low-speed USB device number 38 using xhci_hcd [ 3490.907270] usb 1-3: device descriptor read/64, error -71 [ 3491.351000] usb 1-3: device descriptor read/64, error -71 [ 3491.459158] usb usb1-port3: attempt power cycle [ 3492.115036] usb 1-3: new low-speed USB device number 39 using xhci_hcd [ 3492.115447] usb 1-3: Device not responding to setup address. [ 3492.323157] usb 1-3: Device not responding to setup address. [ 3492.531046] usb 1-3: device not accepting address 39, error -71 [ 3492.867052] usb 1-3: new low-speed USB device number 40 using xhci_hcd [ 3492.867419] usb 1-3: Device not responding to setup address. [ 3493.075274] usb 1-3: Device not responding to setup address. [ 3493.282926] usb 1-3: device not accepting address 40, error -71 [ 3493.283057] usb usb1-port3: unable to enumerate USB device [ 3493.559014] usb 1-3: new low-speed USB device number 41 using xhci_hcd [ 3493.894952] usb 1-3: device descriptor read/64, error -71 [ 3494.338988] usb 1-3: device descriptor read/64, error -71 [ 3494.578967] usb 1-3: new low-speed USB device number 42 using xhci_hcd [ 3494.915048] usb 1-3: device descriptor read/64, error -71 [ 3495.359051] usb 1-3: device descriptor read/64, error -71 [ 3495.467150] usb usb1-port3: attempt power cycle [ 3496.119046] usb 1-3: new low-speed USB device number 43 using xhci_hcd [ 3496.119441] usb 1-3: Device not responding to setup address. [ 3496.327000] usb 1-3: Device not responding to setup address. [ 3496.535051] usb 1-3: device not accepting address 43, error -71 [ 3496.871057] usb 1-3: new low-speed USB device number 44 using xhci_hcd [ 3496.871368] usb 1-3: Device not responding to setup address. [ 3497.079273] usb 1-3: Device not responding to setup address. [ 3497.287050] usb 1-3: device not accepting address 44, error -71 [ 3497.287184] usb usb1-port3: unable to enumerate USB device [ 3497.559047] usb 1-3: new low-speed USB device number 45 using xhci_hcd [ 3497.895228] usb 1-3: device descriptor read/64, error -71 [ 3498.339048] usb 1-3: device descriptor read/64, error -71 [ 3498.575051] usb 1-3: new low-speed USB device number 46 using xhci_hcd [ 3498.915235] usb 1-3: device descriptor read/64, error -71 [ 3499.359012] usb 1-3: device descriptor read/64, error -71 [ 3499.467167] usb usb1-port3: attempt power cycle [ 3500.118949] usb 1-3: new low-speed USB device number 47 using xhci_hcd [ 3500.119297] usb 1-3: Device not responding to setup address. [ 3500.327263] usb 1-3: Device not responding to setup address. [ 3500.534940] usb 1-3: device not accepting address 47, error -71 [ 3500.871048] usb 1-3: new low-speed USB device number 48 using xhci_hcd [ 3500.871427] usb 1-3: Device not responding to setup address. [ 3501.079251] usb 1-3: Device not responding to setup address. [ 3501.287042] usb 1-3: device not accepting address 48, error -71 [ 3501.287175] usb usb1-port3: unable to enumerate USB device [ 3501.559028] usb 1-3: new low-speed USB device number 49 using xhci_hcd [ 3501.895213] usb 1-3: device descriptor read/64, error -71 [ 3502.339075] usb 1-3: device descriptor read/64, error -71 [ 3502.575060] usb 1-3: new low-speed USB device number 50 using xhci_hcd [ 3502.911077] usb 1-3: device descriptor read/64, error -71 [ 3503.355027] usb 1-3: device descriptor read/64, error -71 [ 3503.463108] usb usb1-port3: attempt power cycle [ 3504.119006] usb 1-3: new low-speed USB device number 51 using xhci_hcd [ 3504.119335] usb 1-3: Device not responding to setup address. [ 3504.327090] usb 1-3: Device not responding to setup address. [ 3504.535025] usb 1-3: device not accepting address 51, error -71 [ 3504.871058] usb 1-3: new low-speed USB device number 52 using xhci_hcd [ 3504.871337] usb 1-3: Device not responding to setup address. [ 3505.079077] usb 1-3: Device not responding to setup address. [ 3505.287046] usb 1-3: device not accepting address 52, error -71 [ 3505.287214] usb usb1-port3: unable to enumerate USB device [ 3505.558998] usb 1-3: new low-speed USB device number 53 using xhci_hcd [ 3505.895078] usb 1-3: device descriptor read/64, error -71 [ 3506.339093] usb 1-3: device descriptor read/64, error -71 [ 3506.574977] usb 1-3: new low-speed USB device number 54 using xhci_hcd [ 3506.911076] usb 1-3: device descriptor read/64, error -71 [ 3507.355085] usb 1-3: device descriptor read/64, error -71 [ 3507.463168] usb usb1-port3: attempt power cycle [ 3508.115045] usb 1-3: new low-speed USB device number 55 using xhci_hcd [ 3508.115349] usb 1-3: Device not responding to setup address. [ 3508.323066] usb 1-3: Device not responding to setup address. [ 3508.531033] usb 1-3: device not accepting address 55, error -71 [ 3508.867051] usb 1-3: new low-speed USB device number 56 using xhci_hcd [ 3508.867339] usb 1-3: Device not responding to setup address. [ 3509.079089] usb 1-3: Device not responding to setup address. [ 3509.286938] usb 1-3: device not accepting address 56, error -71 [ 3509.287092] usb usb1-port3: unable to enumerate USB device [ 3509.558996] usb 1-3: new low-speed USB device number 57 using xhci_hcd [ 3509.895075] usb 1-3: device descriptor read/64, error -71 [ 3510.339078] usb 1-3: device descriptor read/64, error -71 [ 3510.575048] usb 1-3: new low-speed USB device number 58 using xhci_hcd [ 3510.911035] usb 1-3: device descriptor read/64, error -71 [ 3511.355063] usb 1-3: device descriptor read/64, error -71 [ 3511.463158] usb usb1-port3: attempt power cycle [ 3512.119053] usb 1-3: new low-speed USB device number 59 using xhci_hcd [ 3512.119341] usb 1-3: Device not responding to setup address. [ 3512.327098] usb 1-3: Device not responding to setup address. [ 3512.535047] usb 1-3: device not accepting address 59, error -71 [ 3512.871046] usb 1-3: new low-speed USB device number 60 using xhci_hcd [ 3512.871351] usb 1-3: Device not responding to setup address. [ 3513.079039] usb 1-3: Device not responding to setup address. [ 3513.291044] usb 1-3: device not accepting address 60, error -71 [ 3513.291202] usb usb1-port3: unable to enumerate USB device [ 3513.567048] usb 1-3: new low-speed USB device number 61 using xhci_hcd [ 3513.903132] usb 1-3: device descriptor read/64, error -71 [ 3514.347076] usb 1-3: device descriptor read/64, error -71 [ 3514.583050] usb 1-3: new low-speed USB device number 62 using xhci_hcd [ 3514.919081] usb 1-3: device descriptor read/64, error -71 [ 3515.363037] usb 1-3: device descriptor read/64, error -71 [ 3515.471090] usb usb1-port3: attempt power cycle [ 3516.123053] usb 1-3: new low-speed USB device number 63 using xhci_hcd [ 3516.123572] usb 1-3: Device not responding to setup address. [ 3516.331311] usb 1-3: Device not responding to setup address. [ 3516.539048] usb 1-3: device not accepting address 63, error -71 [ 3516.875037] usb 1-3: new low-speed USB device number 64 using xhci_hcd [ 3516.875629] usb 1-3: Device not responding to setup address. [ 3517.083370] usb 1-3: Device not responding to setup address. [ 3517.291042] usb 1-3: device not accepting address 64, error -71 [ 3517.291201] usb usb1-port3: unable to enumerate USB device [ 3517.562912] usb 1-3: new low-speed USB device number 65 using xhci_hcd [ 3517.899083] usb 1-3: device descriptor read/64, error -71 [ 3518.343172] usb 1-3: device descriptor read/64, error -71 [ 3518.578930] usb 1-3: new low-speed USB device number 66 using xhci_hcd [ 3518.915082] usb 1-3: device descriptor read/64, error -71 [ 3519.359074] usb 1-3: device descriptor read/64, error -71 [ 3519.467164] usb usb1-port3: attempt power cycle [ 3520.119036] usb 1-3: new low-speed USB device number 67 using xhci_hcd [ 3520.119342] usb 1-3: Device not responding to setup address. [ 3520.327081] usb 1-3: Device not responding to setup address. [ 3520.538875] usb 1-3: device not accepting address 67, error -71 [ 3520.875025] usb 1-3: new low-speed USB device number 68 using xhci_hcd [ 3520.875388] usb 1-3: Device not responding to setup address. [ 3521.082999] usb 1-3: Device not responding to setup address. [ 3521.291046] usb 1-3: device not accepting address 68, error -71 [ 3521.291206] usb usb1-port3: unable to enumerate USB device [ 3521.563043] usb 1-3: new low-speed USB device number 69 using xhci_hcd [ 3521.899082] usb 1-3: device descriptor read/64, error -71 [ 3522.346976] usb 1-3: device descriptor read/64, error -71 [ 3522.582967] usb 1-3: new low-speed USB device number 70 using xhci_hcd [ 3522.918966] usb 1-3: device descriptor read/64, error -71 [ 3523.363075] usb 1-3: device descriptor read/64, error -71 [ 3523.471157] usb usb1-port3: attempt power cycle [ 3524.122947] usb 1-3: new low-speed USB device number 71 using xhci_hcd [ 3524.123395] usb 1-3: Device not responding to setup address. [ 3524.331085] usb 1-3: Device not responding to setup address. [ 3524.539041] usb 1-3: device not accepting address 71, error -71 [ 3524.874952] usb 1-3: new low-speed USB device number 72 using xhci_hcd [ 3524.875534] usb 1-3: Device not responding to setup address. [ 3525.087088] usb 1-3: Device not responding to setup address. [ 3525.295042] usb 1-3: device not accepting address 72, error -71 [ 3525.295202] usb usb1-port3: unable to enumerate USB device [ 3525.567043] usb 1-3: new low-speed USB device number 73 using xhci_hcd [ 3525.903131] usb 1-3: device descriptor read/64, error -71 [ 3526.347065] usb 1-3: device descriptor read/64, error -71 [ 3526.583070] usb 1-3: new low-speed USB device number 74 using xhci_hcd [ 3526.919088] usb 1-3: device descriptor read/64, error -71 [ 3527.363075] usb 1-3: device descriptor read/64, error -71 [ 3527.471085] usb usb1-port3: attempt power cycle [ 3528.127035] usb 1-3: new low-speed USB device number 75 using xhci_hcd [ 3528.127402] usb 1-3: Device not responding to setup address. [ 3528.335090] usb 1-3: Device not responding to setup address. [ 3528.542935] usb 1-3: device not accepting address 75, error -71 [ 3528.878954] usb 1-3: new low-speed USB device number 76 using xhci_hcd [ 3528.879267] usb 1-3: Device not responding to setup address. [ 3529.087071] usb 1-3: Device not responding to setup address. [ 3529.295045] usb 1-3: device not accepting address 76, error -71 [ 3529.295201] usb usb1-port3: unable to enumerate USB device [ 3529.566940] usb 1-3: new low-speed USB device number 77 using xhci_hcd [ 3529.903129] usb 1-3: device descriptor read/64, error -71 [ 3530.351059] usb 1-3: device descriptor read/64, error -71 [ 3530.586955] usb 1-3: new low-speed USB device number 78 using xhci_hcd [ 3530.923017] usb 1-3: device descriptor read/64, error -71 [ 3531.367077] usb 1-3: device descriptor read/64, error -71 [ 3531.475157] usb usb1-port3: attempt power cycle [ 3532.131034] usb 1-3: new low-speed USB device number 79 using xhci_hcd [ 3532.131394] usb 1-3: Device not responding to setup address. [ 3532.339105] usb 1-3: Device not responding to setup address. [ 3532.547028] usb 1-3: device not accepting address 79, error -71 [ 3532.883035] usb 1-3: new low-speed USB device number 80 using xhci_hcd [ 3532.883625] usb 1-3: Device not responding to setup address. [ 3533.091640] usb 1-3: Device not responding to setup address. [ 3533.299023] usb 1-3: device not accepting address 80, error -71 [ 3533.299183] usb usb1-port3: unable to enumerate USB device [ 3664.657931] wlp1s0: authenticate with d2:1c:3c:ac:82:17 [ 3664.711875] wlp1s0: send auth to d2:1c:3c:ac:82:17 (try 1/3) [ 3664.715503] wlp1s0: authenticated [ 3664.718890] wlp1s0: associate with d2:1c:3c:ac:82:17 (try 1/3) [ 3664.725473] wlp1s0: RX AssocResp from d2:1c:3c:ac:82:17 (capab=0x411 status=0 aid=1) [ 3664.728143] wlp1s0: associated [ 3664.749815] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 3710.247261] wlp1s0: deauthenticating from d2:1c:3c:ac:82:17 by local choice (Reason: 3=DEAUTH_LEAVING) [ 4254.278091] capability: warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 4475.494984] usb 1-3: new low-speed USB device number 81 using xhci_hcd [ 4475.831015] usb 1-3: device descriptor read/64, error -71 [ 4476.275008] usb 1-3: device descriptor read/64, error -71 [ 4476.510975] usb 1-3: new low-speed USB device number 82 using xhci_hcd [ 4476.847018] usb 1-3: device descriptor read/64, error -71 [ 4481.150979] usb 1-3: new low-speed USB device number 83 using xhci_hcd [ 4481.487009] usb 1-3: device descriptor read/64, error -71 [ 4481.931071] usb 1-3: device descriptor read/64, error -71 [ 4482.166871] usb 1-3: new low-speed USB device number 84 using xhci_hcd [ 4482.503016] usb 1-3: device descriptor read/64, error -71 [ 4482.947020] usb 1-3: device descriptor read/64, error -71 [ 4483.055097] usb usb1-port3: attempt power cycle [ 4483.706956] usb 1-3: new low-speed USB device number 85 using xhci_hcd [ 4483.707216] usb 1-3: Device not responding to setup address. [ 4483.915038] usb 1-3: Device not responding to setup address. [ 4484.122981] usb 1-3: device not accepting address 85, error -71 [ 4484.459008] usb 1-3: new low-speed USB device number 86 using xhci_hcd [ 4484.459263] usb 1-3: Device not responding to setup address. [ 4484.667027] usb 1-3: Device not responding to setup address. [ 4484.874984] usb 1-3: device not accepting address 86, error -71 [ 4484.875143] usb usb1-port3: unable to enumerate USB device [ 4485.146993] usb 1-3: new low-speed USB device number 87 using xhci_hcd [ 4485.482964] usb 1-3: device descriptor read/64, error -71 [ 4485.927070] usb 1-3: device descriptor read/64, error -71 [ 4486.162984] usb 1-3: new low-speed USB device number 88 using xhci_hcd [ 4486.503029] usb 1-3: device descriptor read/64, error -71 [ 4486.947065] usb 1-3: device descriptor read/64, error -71 [ 4487.055092] usb usb1-port3: attempt power cycle [ 4487.706995] usb 1-3: new low-speed USB device number 89 using xhci_hcd [ 4487.707256] usb 1-3: Device not responding to setup address. [ 4487.915026] usb 1-3: Device not responding to setup address. [ 4488.122984] usb 1-3: device not accepting address 89, error -71 [ 4488.458992] usb 1-3: new low-speed USB device number 90 using xhci_hcd [ 4488.459245] usb 1-3: Device not responding to setup address. [ 4488.667030] usb 1-3: Device not responding to setup address. [ 4488.874987] usb 1-3: device not accepting address 90, error -71 [ 4488.875153] usb usb1-port3: unable to enumerate USB device [ 4507.686962] usb 1-3: new low-speed USB device number 91 using xhci_hcd [ 4508.022964] usb 1-3: device descriptor read/64, error -71 [ 4508.467009] usb 1-3: device descriptor read/64, error -71 [ 4508.702985] usb 1-3: new low-speed USB device number 92 using xhci_hcd [ 4509.039037] usb 1-3: device descriptor read/64, error -71 [ 4544.018978] usb 1-3: new low-speed USB device number 93 using xhci_hcd [ 4544.354828] usb 1-3: device descriptor read/64, error -71 [ 4544.799015] usb 1-3: device descriptor read/64, error -71 [ 4545.034989] usb 1-3: new low-speed USB device number 94 using xhci_hcd [ 4545.370965] usb 1-3: device descriptor read/64, error -71 [ 4545.815025] usb 1-3: device descriptor read/64, error -71 [ 4545.923087] usb usb1-port3: attempt power cycle [ 4546.574979] usb 1-3: new low-speed USB device number 95 using xhci_hcd [ 4546.575234] usb 1-3: Device not responding to setup address. [ 4546.783033] usb 1-3: Device not responding to setup address. [ 4546.990975] usb 1-3: device not accepting address 95, error -71 [ 4547.326991] usb 1-3: new low-speed USB device number 96 using xhci_hcd [ 4547.327259] usb 1-3: Device not responding to setup address. [ 4547.535039] usb 1-3: Device not responding to setup address. [ 4547.742975] usb 1-3: device not accepting address 96, error -71 [ 4547.743134] usb usb1-port3: unable to enumerate USB device [ 4548.014987] usb 1-3: new low-speed USB device number 97 using xhci_hcd [ 4548.350900] usb 1-3: device descriptor read/64, error -71 [ 4548.795004] usb 1-3: device descriptor read/64, error -71 [ 4549.030988] usb 1-3: new low-speed USB device number 98 using xhci_hcd [ 4549.366970] usb 1-3: device descriptor read/64, error -71 [ 4549.811013] usb 1-3: device descriptor read/64, error -71 [ 4549.919140] usb usb1-port3: attempt power cycle [ 4550.570860] usb 1-3: new low-speed USB device number 99 using xhci_hcd [ 4550.571270] usb 1-3: Device not responding to setup address. [ 4550.779485] usb 1-3: Device not responding to setup address. [ 4550.986973] usb 1-3: device not accepting address 99, error -71 [ 4551.114960] usb 1-3: new low-speed USB device number 100 using xhci_hcd [ 4551.115221] usb 1-3: Device not responding to setup address. [ 4551.323009] usb 1-3: Device not responding to setup address. [ 4551.530994] usb 1-3: device not accepting address 100, error -71 [ 4551.531149] usb usb1-port3: unable to enumerate USB device [ 4551.802995] usb 1-3: new low-speed USB device number 101 using xhci_hcd [ 4552.138875] usb 1-3: device descriptor read/64, error -71 [ 4552.583003] usb 1-3: device descriptor read/64, error -71 [ 4552.818970] usb 1-3: new low-speed USB device number 102 using xhci_hcd [ 4553.154999] usb 1-3: device descriptor read/64, error -71 [ 4553.599011] usb 1-3: device descriptor read/64, error -71 [ 4553.707013] usb usb1-port3: attempt power cycle [ 4554.358987] usb 1-3: new low-speed USB device number 103 using xhci_hcd [ 4554.359238] usb 1-3: Device not responding to setup address. [ 4554.567014] usb 1-3: Device not responding to setup address. [ 4554.774973] usb 1-3: device not accepting address 103, error -71 [ 4555.110980] usb 1-3: new low-speed USB device number 104 using xhci_hcd [ 4555.111233] usb 1-3: Device not responding to setup address. [ 4555.319013] usb 1-3: Device not responding to setup address. [ 4555.526966] usb 1-3: device not accepting address 104, error -71 [ 4555.527125] usb usb1-port3: unable to enumerate USB device [ 4555.798957] usb 1-3: new low-speed USB device number 105 using xhci_hcd [ 4556.135009] usb 1-3: device descriptor read/64, error -71 [ 4556.579016] usb 1-3: device descriptor read/64, error -71 [ 4556.814981] usb 1-3: new low-speed USB device number 106 using xhci_hcd [ 4557.151008] usb 1-3: device descriptor read/64, error -71 [ 4557.595013] usb 1-3: device descriptor read/64, error -71 [ 4557.703093] usb usb1-port3: attempt power cycle [ 4558.354982] usb 1-3: new low-speed USB device number 107 using xhci_hcd [ 4558.355231] usb 1-3: Device not responding to setup address. [ 4558.563024] usb 1-3: Device not responding to setup address. [ 4558.770977] usb 1-3: device not accepting address 107, error -71 [ 4559.106981] usb 1-3: new low-speed USB device number 108 using xhci_hcd [ 4559.107244] usb 1-3: Device not responding to setup address. [ 4559.315056] usb 1-3: Device not responding to setup address. [ 4559.522977] usb 1-3: device not accepting address 108, error -71 [ 4559.523136] usb usb1-port3: unable to enumerate USB device [ 4559.798813] usb 1-3: new low-speed USB device number 109 using xhci_hcd [ 4560.142908] usb 1-3: device descriptor read/64, error -71 [ 4560.586928] usb 1-3: device descriptor read/64, error -71 [ 4560.826840] usb 1-3: new low-speed USB device number 110 using xhci_hcd [ 4561.166888] usb 1-3: device descriptor read/64, error -71 [ 4561.614893] usb 1-3: device descriptor read/64, error -71 [ 4561.722953] usb usb1-port3: attempt power cycle [ 4562.374844] usb 1-3: new low-speed USB device number 111 using xhci_hcd [ 4562.375103] usb 1-3: Device not responding to setup address. [ 4562.582992] usb 1-3: Device not responding to setup address. [ 4562.790865] usb 1-3: device not accepting address 111, error -71 [ 4563.126844] usb 1-3: new low-speed USB device number 112 using xhci_hcd [ 4563.127004] usb 1-3: Device not responding to setup address. [ 4563.334883] usb 1-3: Device not responding to setup address. [ 4563.542800] usb 1-3: device not accepting address 112, error -71 [ 4563.542866] usb usb1-port3: unable to enumerate USB device [ 4563.814854] usb 1-3: new low-speed USB device number 113 using xhci_hcd [ 4564.150906] usb 1-3: device descriptor read/64, error -71 [ 4564.606889] usb 1-3: device descriptor read/64, error -71 [ 4564.842861] usb 1-3: new low-speed USB device number 114 using xhci_hcd [ 4565.178872] usb 1-3: device descriptor read/64, error -71 [ 4565.626900] usb 1-3: device descriptor read/64, error -71 [ 4565.734967] usb usb1-port3: attempt power cycle [ 4566.390851] usb 1-3: new low-speed USB device number 115 using xhci_hcd [ 4566.391100] usb 1-3: Device not responding to setup address. [ 4566.598887] usb 1-3: Device not responding to setup address. [ 4566.806896] usb 1-3: device not accepting address 115, error -71 [ 4567.142871] usb 1-3: new low-speed USB device number 116 using xhci_hcd [ 4567.143031] usb 1-3: Device not responding to setup address. [ 4567.350890] usb 1-3: Device not responding to setup address. [ 4567.562873] usb 1-3: device not accepting address 116, error -71 [ 4567.563055] usb usb1-port3: unable to enumerate USB device [ 4567.838850] usb 1-3: new low-speed USB device number 117 using xhci_hcd [ 4568.178868] usb 1-3: device descriptor read/64, error -71 [ 4568.622894] usb 1-3: device descriptor read/64, error -71 [ 4568.862844] usb 1-3: new low-speed USB device number 118 using xhci_hcd [ 4569.198923] usb 1-3: device descriptor read/64, error -71 [ 4569.642866] usb 1-3: device descriptor read/64, error -71 [ 4569.750932] usb usb1-port3: attempt power cycle [ 4570.402857] usb 1-3: new low-speed USB device number 119 using xhci_hcd [ 4570.403025] usb 1-3: Device not responding to setup address. [ 4570.610906] usb 1-3: Device not responding to setup address. [ 4570.818812] usb 1-3: device not accepting address 119, error -71 [ 4571.154857] usb 1-3: new low-speed USB device number 120 using xhci_hcd [ 4571.155026] usb 1-3: Device not responding to setup address. [ 4571.362861] usb 1-3: Device not responding to setup address. [ 4571.574843] usb 1-3: device not accepting address 120, error -71 [ 4571.574996] usb usb1-port3: unable to enumerate USB device [ 4571.854854] usb 1-3: new low-speed USB device number 121 using xhci_hcd [ 4572.194903] usb 1-3: device descriptor read/64, error -71 [ 4572.638887] usb 1-3: device descriptor read/64, error -71 [ 4572.874856] usb 1-3: new low-speed USB device number 122 using xhci_hcd [ 4573.210884] usb 1-3: device descriptor read/64, error -71 [ 4573.658869] usb 1-3: device descriptor read/64, error -71 [ 4573.767044] usb usb1-port3: attempt power cycle [ 4574.426850] usb 1-3: new low-speed USB device number 123 using xhci_hcd [ 4574.427039] usb 1-3: Device not responding to setup address. [ 4574.634918] usb 1-3: Device not responding to setup address. [ 4574.842867] usb 1-3: device not accepting address 123, error -71 [ 4575.178810] usb 1-3: new low-speed USB device number 124 using xhci_hcd [ 4575.178955] usb 1-3: Device not responding to setup address. [ 4575.386905] usb 1-3: Device not responding to setup address. [ 4575.594864] usb 1-3: device not accepting address 124, error -71 [ 4575.595057] usb usb1-port3: unable to enumerate USB device [ 4575.882847] usb 1-3: new low-speed USB device number 125 using xhci_hcd [ 4576.218863] usb 1-3: device descriptor read/64, error -71 [ 4576.670884] usb 1-3: device descriptor read/64, error -71 [ 4576.906847] usb 1-3: new low-speed USB device number 126 using xhci_hcd [ 4577.246885] usb 1-3: device descriptor read/64, error -71 [ 4577.698871] usb 1-3: device descriptor read/64, error -71 [ 4577.806960] usb usb1-port3: attempt power cycle [ 4578.458941] usb 1-3: new low-speed USB device number 127 using xhci_hcd [ 4578.459447] usb 1-3: Device not responding to setup address. [ 4578.667220] usb 1-3: Device not responding to setup address. [ 4578.874848] usb 1-3: device not accepting address 127, error -71 [ 4579.210855] usb 1-3: new low-speed USB device number 2 using xhci_hcd [ 4579.211396] usb 1-3: Device not responding to setup address. [ 4579.419222] usb 1-3: Device not responding to setup address. [ 4579.626968] usb 1-3: device not accepting address 2, error -71 [ 4579.627127] usb usb1-port3: unable to enumerate USB device [ 4579.898973] usb 1-3: new low-speed USB device number 5 using xhci_hcd [ 4580.234996] usb 1-3: device descriptor read/64, error -71 [ 4580.679012] usb 1-3: device descriptor read/64, error -71 [ 4580.914998] usb 1-3: new low-speed USB device number 6 using xhci_hcd [ 4581.251004] usb 1-3: device descriptor read/64, error -71 [ 4581.694887] usb 1-3: device descriptor read/64, error -71 [ 4581.802986] usb usb1-port3: attempt power cycle [ 4582.454980] usb 1-3: new low-speed USB device number 7 using xhci_hcd [ 4582.455229] usb 1-3: Device not responding to setup address. [ 4582.663025] usb 1-3: Device not responding to setup address. [ 4582.870973] usb 1-3: device not accepting address 7, error -71 [ 4583.206980] usb 1-3: new low-speed USB device number 8 using xhci_hcd [ 4583.207161] usb 1-3: Device not responding to setup address. [ 4583.415024] usb 1-3: Device not responding to setup address. [ 4583.622980] usb 1-3: device not accepting address 8, error -71 [ 4583.623139] usb usb1-port3: unable to enumerate USB device [ 4583.894980] usb 1-3: new low-speed USB device number 9 using xhci_hcd [ 4584.231029] usb 1-3: device descriptor read/64, error -71 [ 4584.675008] usb 1-3: device descriptor read/64, error -71 [ 4584.910995] usb 1-3: new low-speed USB device number 10 using xhci_hcd [ 4585.247021] usb 1-3: device descriptor read/64, error -71 [ 4585.691013] usb 1-3: device descriptor read/64, error -71 [ 4585.799097] usb usb1-port3: attempt power cycle [ 4586.451003] usb 1-3: new low-speed USB device number 11 using xhci_hcd [ 4586.451266] usb 1-3: Device not responding to setup address. [ 4586.659010] usb 1-3: Device not responding to setup address. [ 4586.866972] usb 1-3: device not accepting address 11, error -71 [ 4587.202959] usb 1-3: new low-speed USB device number 12 using xhci_hcd [ 4587.203130] usb 1-3: Device not responding to setup address. [ 4587.411010] usb 1-3: Device not responding to setup address. [ 4587.618973] usb 1-3: device not accepting address 12, error -71 [ 4587.619132] usb usb1-port3: unable to enumerate USB device [ 4587.890955] usb 1-3: new low-speed USB device number 13 using xhci_hcd [ 4588.231012] usb 1-3: device descriptor read/64, error -71 [ 4588.674941] usb 1-3: device descriptor read/64, error -71 [ 4588.910955] usb 1-3: new low-speed USB device number 14 using xhci_hcd [ 4589.247007] usb 1-3: device descriptor read/64, error -71 [ 4589.691017] usb 1-3: device descriptor read/64, error -71 [ 4589.799065] usb usb1-port3: attempt power cycle [ 4590.450973] usb 1-3: new low-speed USB device number 15 using xhci_hcd [ 4590.451227] usb 1-3: Device not responding to setup address. [ 4590.659016] usb 1-3: Device not responding to setup address. [ 4590.866913] usb 1-3: device not accepting address 15, error -71 [ 4591.202981] usb 1-3: new low-speed USB device number 16 using xhci_hcd [ 4591.203235] usb 1-3: Device not responding to setup address. [ 4591.411010] usb 1-3: Device not responding to setup address. [ 4591.618972] usb 1-3: device not accepting address 16, error -71 [ 4591.619131] usb usb1-port3: unable to enumerate USB device [ 4591.890945] usb 1-3: new low-speed USB device number 17 using xhci_hcd [ 4592.227964] usb 1-3: device descriptor read/64, error -71 [ 4592.671002] usb 1-3: device descriptor read/64, error -71 [ 4592.906974] usb 1-3: new low-speed USB device number 18 using xhci_hcd [ 4593.243006] usb 1-3: device descriptor read/64, error -71 [ 4593.686927] usb 1-3: device descriptor read/64, error -71 [ 4593.795089] usb usb1-port3: attempt power cycle [ 4594.446973] usb 1-3: new low-speed USB device number 19 using xhci_hcd [ 4594.447229] usb 1-3: Device not responding to setup address. [ 4594.654928] usb 1-3: Device not responding to setup address. [ 4594.862988] usb 1-3: device not accepting address 19, error -71 [ 4595.198923] usb 1-3: new low-speed USB device number 20 using xhci_hcd [ 4595.199474] usb 1-3: Device not responding to setup address. [ 4595.407484] usb 1-3: Device not responding to setup address. [ 4595.614965] usb 1-3: device not accepting address 20, error -71 [ 4595.615123] usb usb1-port3: unable to enumerate USB device [ 4959.326619] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [ 4959.326645] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 4959.326665] pcieport 0000:00:1c.0: AER: device [8086:9d14] error status/mask=00000001/00002000 [ 4959.326676] pcieport 0000:00:1c.0: AER: [ 0] RxErr [ 4959.360697] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [ 4959.360720] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 4959.360732] pcieport 0000:00:1c.0: AER: device [8086:9d14] error status/mask=00002001/00002000 [ 4959.360740] pcieport 0000:00:1c.0: AER: [ 0] RxErr [ 5006.859133] wlp1s0: authenticate with d2:1c:3c:ac:82:17 [ 5006.896869] wlp1s0: send auth to d2:1c:3c:ac:82:17 (try 1/3) [ 5006.903172] wlp1s0: authenticated [ 5006.910815] wlp1s0: associate with d2:1c:3c:ac:82:17 (try 1/3) [ 5006.917694] wlp1s0: RX AssocResp from d2:1c:3c:ac:82:17 (capab=0x411 status=0 aid=1) [ 5006.920178] wlp1s0: associated [ 5006.938379] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready