[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 [ 0.000000] Linux version 5.4.0-65-generic (buildd@lcy01-amd64-018) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #73-Ubuntu SMP Mon Jan 18 17:25:17 UTC 2021 (Ubuntu 5.4.0-65.73-generic 5.4.78) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-65-generic root=UUID=79aaf326-5186-4bf8-87b0-58b26d18f209 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da4e9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da4ea000-0x00000000da52cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da52d000-0x00000000da797fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da798000-0x00000000da966fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da967000-0x00000000dacbbfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dacbc000-0x00000000dad67fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dad68000-0x00000000dafe7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dafe8000-0x00000000daffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. Inspiron N5050/01HXXJ, BIOS A05 08/03/2012 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.494 MHz processor [ 0.002598] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002600] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002608] last_pfn = 0x19fe00 max_arch_pfn = 0x400000000 [ 0.002612] MTRR default type: uncachable [ 0.002613] MTRR fixed ranges enabled: [ 0.002615] 00000-9FFFF write-back [ 0.002615] A0000-BFFFF uncachable [ 0.002616] C0000-D3FFF write-protect [ 0.002617] D4000-E7FFF uncachable [ 0.002618] E8000-FFFFF write-protect [ 0.002619] MTRR variable ranges enabled: [ 0.002620] 0 base 000000000 mask F00000000 write-back [ 0.002621] 1 base 100000000 mask F80000000 write-back [ 0.002622] 2 base 180000000 mask FE0000000 write-back [ 0.002623] 3 base 0DB800000 mask FFF800000 uncachable [ 0.002624] 4 base 0DC000000 mask FFC000000 uncachable [ 0.002625] 5 base 0E0000000 mask FE0000000 uncachable [ 0.002625] 6 base 19FE00000 mask FFFE00000 uncachable [ 0.002626] 7 disabled [ 0.002627] 8 disabled [ 0.002627] 9 disabled [ 0.003503] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003670] total RAM covered: 6070M [ 0.004078] Found optimal setting for mtrr clean up [ 0.004079] gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G [ 0.004895] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.004900] last_pfn = 0xdacbc max_arch_pfn = 0x400000000 [ 0.015641] found SMP MP-table at [mem 0x000fd1b0-0x000fd1bf] [ 0.031562] check: Scanning 1 areas for low memory corruption [ 0.031566] reserving inaccessible SNB gfx pages [ 0.032118] RAMDISK: [mem 0x3207b000-0x35034fff] [ 0.032127] ACPI: Early table checksum verification disabled [ 0.032132] ACPI: RSDP 0x00000000000F0410 000024 (v02 DELL ) [ 0.032135] ACPI: XSDT 0x00000000DAFE8078 00006C (v01 DELL WN09 01072009 AMI 00010013) [ 0.032141] ACPI: FACP 0x00000000DAFF1C08 0000F4 (v04 DELL WN09 01072009 AMI 00010013) [ 0.032148] ACPI: DSDT 0x00000000DAFE8170 009A96 (v02 DELL WN09 00000000 INTL 20051117) [ 0.032151] ACPI: FACS 0x00000000DAFE4F80 000040 [ 0.032154] ACPI: APIC 0x00000000DAFF1D00 000072 (v03 DELL WN09 01072009 AMI 00010013) [ 0.032157] ACPI: MCFG 0x00000000DAFF1D78 00003C (v01 DELL WN09 01072009 MSFT 00000097) [ 0.032160] ACPI: SSDT 0x00000000DAFF1DB8 0004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112) [ 0.032163] ACPI: SLIC 0x00000000DAFF2268 000176 (v01 DELL WN09 01072009 AMI 00010013) [ 0.032166] ACPI: HPET 0x00000000DAFF23E0 000038 (v01 DELL WN09 01072009 AMI. 00000004) [ 0.032169] ACPI: SSDT 0x00000000DAFF2418 000780 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.032172] ACPI: SSDT 0x00000000DAFF2B98 000996 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.032176] ACPI: OSFR 0x00000000DAFF3530 00008C (v01 DELL M08 07DC0803 ASL 00000061) [ 0.032185] ACPI: Local APIC address 0xfee00000 [ 0.032276] No NUMA configuration found [ 0.032276] Faking a node at [mem 0x0000000000000000-0x000000019fdfffff] [ 0.032287] NODE_DATA(0) allocated [mem 0x19fdd1000-0x19fdfbfff] [ 0.032589] Zone ranges: [ 0.032590] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032592] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.032593] Normal [mem 0x0000000100000000-0x000000019fdfffff] [ 0.032593] Device empty [ 0.032594] Movable zone start for each node [ 0.032598] Early memory node ranges [ 0.032599] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.032600] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.032600] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.032601] node 0: [mem 0x0000000040200000-0x00000000da4e9fff] [ 0.032602] node 0: [mem 0x00000000da52d000-0x00000000da797fff] [ 0.032603] node 0: [mem 0x00000000da967000-0x00000000dacbbfff] [ 0.032603] node 0: [mem 0x0000000100000000-0x000000019fdfffff] [ 0.032839] Zeroed struct page in unavailable ranges: 23482 pages [ 0.032841] Initmem setup node 0 [mem 0x0000000000001000-0x000000019fdfffff] [ 0.032842] On node 0 totalpages: 1549382 [ 0.032843] DMA zone: 64 pages used for memmap [ 0.032844] DMA zone: 156 pages reserved [ 0.032845] DMA zone: 3996 pages, LIFO batch:0 [ 0.032908] DMA32 zone: 13915 pages used for memmap [ 0.032909] DMA32 zone: 890538 pages, LIFO batch:63 [ 0.046733] Normal zone: 10232 pages used for memmap [ 0.046735] Normal zone: 654848 pages, LIFO batch:63 [ 0.055921] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff] [ 0.056042] ACPI: PM-Timer IO Port: 0x408 [ 0.056044] ACPI: Local APIC address 0xfee00000 [ 0.056053] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.056064] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.056067] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.056068] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.056070] ACPI: IRQ0 used by override. [ 0.056071] ACPI: IRQ9 used by override. [ 0.056073] Using ACPI (MADT) for SMP configuration information [ 0.056074] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.056079] TSC deadline timer available [ 0.056080] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.056106] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.056108] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.056108] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.056109] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.056109] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.056111] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.056113] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.056115] PM: Registered nosave memory: [mem 0xda4ea000-0xda52cfff] [ 0.056116] PM: Registered nosave memory: [mem 0xda798000-0xda966fff] [ 0.056118] PM: Registered nosave memory: [mem 0xdacbc000-0xdad67fff] [ 0.056119] PM: Registered nosave memory: [mem 0xdad68000-0xdafe7fff] [ 0.056119] PM: Registered nosave memory: [mem 0xdafe8000-0xdaffffff] [ 0.056120] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.056120] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.056121] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.056121] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.056122] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.056123] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.056123] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.056124] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.056124] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.056125] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.056125] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.056126] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.056126] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.056127] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.056129] [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.056130] Booting paravirtualized kernel on bare hardware [ 0.056133] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.056140] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.056328] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u524288 [ 0.056337] pcpu-alloc: s188416 r8192 d28672 u524288 alloc=1*2097152 [ 0.056338] pcpu-alloc: [0] 0 1 2 3 [ 0.056372] Built 1 zonelists, mobility grouping on. Total pages: 1525015 [ 0.056373] Policy zone: Normal [ 0.056374] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-65-generic root=UUID=79aaf326-5186-4bf8-87b0-58b26d18f209 ro quiet splash [ 0.057000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.057246] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.057306] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.061048] Calgary: detecting Calgary via BIOS EBDA area [ 0.061050] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.078358] Memory: 5937576K/6197528K available (14339K kernel code, 2399K rwdata, 4960K rodata, 2724K init, 4980K bss, 259952K reserved, 0K cma-reserved) [ 0.078365] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.078501] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.078514] Kernel/User page tables isolation: enabled [ 0.078530] ftrace: allocating 44555 entries in 175 pages [ 0.097851] rcu: Hierarchical RCU implementation. [ 0.097852] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.097853] Tasks RCU enabled. [ 0.097854] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.097855] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.101233] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.102881] Console: colour VGA+ 80x25 [ 0.102886] printk: console [tty0] enabled [ 0.102901] ACPI: Core revision 20190816 [ 0.103010] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.103024] APIC: Switch to symmetric I/O mode setup [ 0.103095] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.103528] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.123025] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2283e647691, max_idle_ns: 440795318027 ns [ 0.123030] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.98 BogoMIPS (lpj=9577976) [ 0.123032] pid_max: default: 32768 minimum: 301 [ 0.123063] LSM: Security Framework initializing [ 0.123075] Yama: becoming mindful. [ 0.123103] AppArmor: AppArmor initialized [ 0.123149] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.123163] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.123178] *** VALIDATE tmpfs *** [ 0.123333] *** VALIDATE proc *** [ 0.123388] *** VALIDATE cgroup1 *** [ 0.123390] *** VALIDATE cgroup2 *** [ 0.123441] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.123451] process: using mwait in idle threads [ 0.123454] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.123455] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.123457] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.123459] Spectre V2 : Mitigation: Full generic retpoline [ 0.123459] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.123460] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.123461] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.123462] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.123463] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.123466] MDS: Mitigation: Clear CPU buffers [ 0.123629] Freeing SMP alternatives memory: 40K [ 0.127119] smpboot: CPU0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.127227] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.127234] ... version: 3 [ 0.127235] ... bit width: 48 [ 0.127235] ... generic registers: 4 [ 0.127236] ... value mask: 0000ffffffffffff [ 0.127237] ... max period: 00007fffffffffff [ 0.127237] ... fixed-purpose events: 3 [ 0.127238] ... event mask: 000000070000000f [ 0.127278] rcu: Hierarchical SRCU implementation. [ 0.128151] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.128210] smp: Bringing up secondary CPUs ... [ 0.128320] x86: Booting SMP configuration: [ 0.128321] .... node #0, CPUs: #1 #2 [ 0.133482] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.133482] #3 [ 0.135093] smp: Brought up 1 node, 4 CPUs [ 0.135093] smpboot: Max logical packages: 1 [ 0.135093] smpboot: Total of 4 processors activated (19155.95 BogoMIPS) [ 0.138180] devtmpfs: initialized [ 0.138180] x86/mm: Memory block size: 128MB [ 0.139336] PM: Registering ACPI NVS region [mem 0xda4ea000-0xda52cfff] (274432 bytes) [ 0.139336] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes) [ 0.139336] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.139336] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.139336] pinctrl core: initialized pinctrl subsystem [ 0.139336] PM: RTC time: 01:08:31, date: 2021-02-08 [ 0.139336] NET: Registered protocol family 16 [ 0.139427] audit: initializing netlink subsys (disabled) [ 0.139433] audit: type=2000 audit(1612746511.036:1): state=initialized audit_enabled=0 res=1 [ 0.139433] EISA bus registered [ 0.139433] cpuidle: using governor ladder [ 0.139433] cpuidle: using governor menu [ 0.139433] ACPI: bus type PCI registered [ 0.139433] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.139433] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.139433] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.139433] PCI: Using configuration type 1 for base access [ 0.139433] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.139582] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.140428] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.143135] ACPI: Added _OSI(Module Device) [ 0.143136] ACPI: Added _OSI(Processor Device) [ 0.143136] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.143137] ACPI: Added _OSI(Processor Aggregator Device) [ 0.143138] ACPI: Added _OSI(Linux-Dell-Video) [ 0.143139] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.143140] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.153122] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.155287] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.159254] ACPI: Dynamic OEM Table Load: [ 0.159261] ACPI: SSDT 0xFFFF9BEDD8B19800 00064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.160340] ACPI: Dynamic OEM Table Load: [ 0.160345] ACPI: SSDT 0xFFFF9BEDD8B66C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.161138] ACPI: Dynamic OEM Table Load: [ 0.161142] ACPI: SSDT 0xFFFF9BEDD8190A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.161704] ACPI: Interpreter enabled [ 0.161704] ACPI: (supports S0 S1 S3 S4 S5) [ 0.161704] ACPI: Using IOAPIC for interrupt routing [ 0.161704] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.161704] ACPI: Enabled 15 GPEs in block 00 to 3F [ 0.187918] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.187925] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.188169] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.188396] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug AER PCIeCapability] [ 0.189121] PCI host bridge to bus 0000:00 [ 0.189124] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.189125] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.189127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.189128] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.189129] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.189130] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.189131] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.189132] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.189133] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.189135] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.189136] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.189146] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.189267] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.189278] pci 0000:00:02.0: reg 0x10: [mem 0xf6800000-0xf6bfffff 64bit] [ 0.189283] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.189287] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.189435] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.189461] pci 0000:00:16.0: reg 0x10: [mem 0xf7e0a000-0xf7e0a00f 64bit] [ 0.189539] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.189651] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.189673] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e08000-0xf7e083ff] [ 0.189760] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.189882] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.189905] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e00000-0xf7e03fff 64bit] [ 0.189986] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.190103] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.190203] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.190332] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.190430] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.190554] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.190653] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.190790] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400 [ 0.191003] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.191093] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.191116] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e07000-0xf7e073ff] [ 0.191203] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.191323] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100 [ 0.191539] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.191558] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.191565] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.191573] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.191580] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.191587] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.191595] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e06000-0xf7e067ff] [ 0.191638] pci 0000:00:1f.2: PME# supported from D3hot [ 0.191749] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.191768] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e05000-0xf7e050ff 64bit] [ 0.191789] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.191964] pci 0000:00:1c.0: PCI bridge to [bus 03-04] [ 0.192048] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000 [ 0.192083] pci 0000:05:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.192118] pci 0000:05:00.0: reg 0x18: [mem 0xf1104000-0xf1104fff 64bit pref] [ 0.192139] pci 0000:05:00.0: reg 0x20: [mem 0xf1100000-0xf1103fff 64bit pref] [ 0.192264] pci 0000:05:00.0: supports D1 D2 [ 0.192266] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192416] pci 0000:00:1c.1: PCI bridge to [bus 05-06] [ 0.192420] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.192428] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref] [ 0.192507] pci 0000:09:00.0: [168c:002b] type 00 class 0x028000 [ 0.192552] pci 0000:09:00.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit] [ 0.192718] pci 0000:09:00.0: supports D1 [ 0.192720] pci 0000:09:00.0: PME# supported from D0 D1 D3hot [ 0.192869] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.192875] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.192952] pci 0000:00:1c.7: PCI bridge to [bus 11-1f] [ 0.192957] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff] [ 0.192962] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff] [ 0.192969] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref] [ 0.193525] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.193615] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.193701] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.193788] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.193873] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.193959] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.194045] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.194131] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.195116] iommu: Default domain type: Translated [ 0.195249] SCSI subsystem initialized [ 0.195263] libata version 3.00 loaded. [ 0.195263] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.195263] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.195263] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.195263] vgaarb: loaded [ 0.195263] ACPI: bus type USB registered [ 0.195263] usbcore: registered new interface driver usbfs [ 0.195263] usbcore: registered new interface driver hub [ 0.195263] usbcore: registered new device driver usb [ 0.195263] pps_core: LinuxPPS API ver. 1 registered [ 0.195263] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.195263] PTP clock support registered [ 0.195263] EDAC MC: Ver: 3.0.0 [ 0.195263] PCI: Using ACPI for IRQ routing [ 0.197071] PCI: pci_cache_line_size set to 64 bytes [ 0.197119] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.197121] e820: reserve RAM buffer [mem 0xda4ea000-0xdbffffff] [ 0.197122] e820: reserve RAM buffer [mem 0xda798000-0xdbffffff] [ 0.197123] e820: reserve RAM buffer [mem 0xdacbc000-0xdbffffff] [ 0.197124] e820: reserve RAM buffer [mem 0x19fe00000-0x19fffffff] [ 0.199032] NetLabel: Initializing [ 0.199032] NetLabel: domain hash size = 128 [ 0.199032] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.199032] NetLabel: unlabeled traffic allowed by default [ 0.199876] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.199881] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.201912] clocksource: Switched to clocksource tsc-early [ 0.213424] *** VALIDATE bpf *** [ 0.213503] VFS: Disk quotas dquot_6.6.0 [ 0.213522] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.213551] *** VALIDATE ramfs *** [ 0.213555] *** VALIDATE hugetlbfs *** [ 0.213644] AppArmor: AppArmor Filesystem Enabled [ 0.213675] pnp: PnP ACPI init [ 0.213858] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.213860] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.213862] system 00:00: [io 0xffff] has been reserved [ 0.213863] system 00:00: [io 0xffff] has been reserved [ 0.213865] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.213866] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.213867] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.213869] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.213875] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.213902] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.213969] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.213973] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.214028] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.214030] system 00:03: [mem 0xfe800000-0xfe802fff] has been reserved [ 0.214034] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.214066] pnp 00:04: Plug and Play ACPI device, IDs DLL0504 SYN0600 SYN0002 PNP0f13 (active) [ 0.214099] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.214378] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.214380] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.214381] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.214383] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.214384] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.214386] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.214387] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.214389] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.214390] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.214392] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.214393] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.214397] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.214613] system 00:07: [mem 0x20000000-0x201fffff] has been reserved [ 0.214614] system 00:07: [mem 0x40000000-0x401fffff] has been reserved [ 0.214618] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.214681] pnp: PnP ACPI: found 8 devices [ 0.216113] thermal_sys: Registered thermal governor 'fair_share' [ 0.216114] thermal_sys: Registered thermal governor 'bang_bang' [ 0.216115] thermal_sys: Registered thermal governor 'step_wise' [ 0.216116] thermal_sys: Registered thermal governor 'user_space' [ 0.216116] thermal_sys: Registered thermal governor 'power_allocator' [ 0.220614] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.220654] pci 0000:00:1c.0: PCI bridge to [bus 03-04] [ 0.220667] pci 0000:00:1c.1: PCI bridge to [bus 05-06] [ 0.220670] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.220677] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref] [ 0.220682] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.220687] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.220696] pci 0000:00:1c.7: PCI bridge to [bus 11-1f] [ 0.220699] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff] [ 0.220705] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff] [ 0.220710] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref] [ 0.220719] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.220720] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.220722] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.220723] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window] [ 0.220724] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window] [ 0.220725] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window] [ 0.220726] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window] [ 0.220728] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window] [ 0.220729] pci_bus 0000:00: resource 12 [mem 0xdfa00000-0xfeafffff window] [ 0.220730] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff window] [ 0.220732] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.220733] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref] [ 0.220734] pci_bus 0000:09: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.220735] pci_bus 0000:11: resource 0 [io 0xc000-0xdfff] [ 0.220736] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff] [ 0.220738] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref] [ 0.220849] NET: Registered protocol family 2 [ 0.221033] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.221091] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.221278] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.221390] TCP: Hash tables configured (established 65536 bind 65536) [ 0.221436] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.221469] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.221537] NET: Registered protocol family 1 [ 0.221543] NET: Registered protocol family 44 [ 0.221555] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.347234] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 122721 usecs [ 0.471221] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 121057 usecs [ 0.471240] PCI: CLS 64 bytes, default 64 [ 0.471292] Trying to unpack rootfs image as initramfs... [ 0.617386] Freeing initrd memory: 48872K [ 0.617446] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.617448] software IO TLB: mapped [mem 0xd64ea000-0xda4ea000] (64MB) [ 0.617668] check: Scanning for low memory corruption every 60 seconds [ 0.618112] Initialise system trusted keyrings [ 0.618123] Key type blacklist registered [ 0.618155] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.619625] zbud: loaded [ 0.620022] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.620186] fuse: init (API version 7.31) [ 0.620203] *** VALIDATE fuse *** [ 0.620205] *** VALIDATE fuse *** [ 0.620298] Platform Keyring initialized [ 0.624668] Key type asymmetric registered [ 0.624670] Asymmetric key parser 'x509' registered [ 0.624681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.624724] io scheduler mq-deadline registered [ 0.625592] pcieport 0000:00:1c.7: pciehp: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 0.625744] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.625799] intel_idle: MWAIT substates: 0x21120 [ 0.625800] intel_idle: v0.4.1 model 0x2A [ 0.625982] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.626138] ACPI: AC Adapter [AC] (on-line) [ 0.626199] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.626236] ACPI: Lid Switch [LID0] [ 0.626269] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.626284] ACPI: Power Button [PWRB] [ 0.626315] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.626329] ACPI: Sleep Button [SBTN] [ 0.626360] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.626384] ACPI: Power Button [PWRF] [ 0.643116] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.643118] ACPI: Thermal Zone [THM] (58 C) [ 0.643307] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.645183] Linux agpgart interface v0.103 [ 0.647299] loop: module loaded [ 0.647538] libphy: Fixed MDIO Bus: probed [ 0.647539] tun: Universal TUN/TAP device driver, 1.6 [ 0.647573] PPP generic driver version 2.4.2 [ 0.647621] VFIO - User Level meta-driver version: 0.3 [ 0.647704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.647707] ehci-pci: EHCI PCI platform driver [ 0.647885] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.647892] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.647905] ehci-pci 0000:00:1a.0: debug port 2 [ 0.651812] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.651826] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e08000 [ 0.667156] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.667286] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.667289] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.667291] usb usb1: Product: EHCI Host Controller [ 0.667294] usb usb1: Manufacturer: Linux 5.4.0-65-generic ehci_hcd [ 0.667296] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.667631] hub 1-0:1.0: USB hub found [ 0.667641] hub 1-0:1.0: 2 ports detected [ 0.668760] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.668769] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.668785] ehci-pci 0000:00:1d.0: debug port 2 [ 0.672683] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.672699] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e07000 [ 0.679912] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.687139] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.687252] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.687253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.687255] usb usb2: Product: EHCI Host Controller [ 0.687256] usb usb2: Manufacturer: Linux 5.4.0-65-generic ehci_hcd [ 0.687257] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.687477] hub 2-0:1.0: USB hub found [ 0.687489] hub 2-0:1.0: 2 ports detected [ 0.687643] ehci-platform: EHCI generic platform driver [ 0.687660] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.687665] ohci-pci: OHCI PCI platform driver [ 0.687675] ohci-platform: OHCI generic platform driver [ 0.687682] uhci_hcd: USB Universal Host Controller Interface driver [ 0.687743] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12 [ 0.690250] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.690255] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.690489] mousedev: PS/2 mouse device common for all mice [ 0.690756] rtc_cmos 00:01: RTC can wake from S4 [ 0.690944] rtc_cmos 00:01: registered as rtc0 [ 0.690964] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.690971] i2c /dev entries driver [ 0.691016] device-mapper: uevent: version 1.0.3 [ 0.691090] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 0.691108] platform eisa.0: Probing EISA bus 0 [ 0.691110] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.691111] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.691113] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.691114] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.691115] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.691116] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.691117] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.691118] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.691119] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.691120] platform eisa.0: EISA: Detected 0 cards [ 0.691126] intel_pstate: Intel P-state driver initializing [ 0.691279] ledtrig-cpu: registered to indicate activity on CPUs [ 0.691339] drop_monitor: Initializing network drop monitor service [ 0.691513] NET: Registered protocol family 10 [ 0.698419] Segment Routing with IPv6 [ 0.698447] NET: Registered protocol family 17 [ 0.698486] Key type dns_resolver registered [ 0.698746] RAS: Correctable Errors collector initialized. [ 0.698787] microcode: sig=0x206a7, pf=0x10, revision=0x2f [ 0.698831] microcode: Microcode Update Driver: v2.2. [ 0.698837] IPI shorthand broadcast: enabled [ 0.698843] sched_clock: Marking stable (697225846, 1600582)->(709365165, -10538737) [ 0.698930] registered taskstats version 1 [ 0.698943] Loading compiled-in X.509 certificates [ 0.699954] Loaded X.509 cert 'Build time autogenerated kernel key: 254611168742f91faa32f8ad6a92fc903145caeb' [ 0.699988] zswap: loaded using pool lzo/zbud [ 0.700071] Key type ._fscrypt registered [ 0.700072] Key type .fscrypt registered [ 0.706697] Key type big_key registered [ 0.706716] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.709868] Key type encrypted registered [ 0.709872] AppArmor: AppArmor sha1 policy hashing enabled [ 0.709879] ima: No TPM chip found, activating TPM-bypass! [ 0.709885] ima: Allocated hash algorithm: sha1 [ 0.709893] ima: No architecture policies found [ 0.709906] evm: Initialising EVM extended attributes: [ 0.709907] evm: security.selinux [ 0.709907] evm: security.SMACK64 [ 0.709908] evm: security.SMACK64EXEC [ 0.709908] evm: security.SMACK64TRANSMUTE [ 0.709909] evm: security.SMACK64MMAP [ 0.709909] evm: security.apparmor [ 0.709910] evm: security.ima [ 0.709910] evm: security.capability [ 0.709911] evm: HMAC attrs: 0x1 [ 0.710281] PM: Magic number: 9:741:103 [ 0.710560] rtc_cmos 00:01: setting system clock to 2021-02-08T01:08:31 UTC (1612746511) [ 0.712030] Freeing unused decrypted memory: 2040K [ 0.712535] Freeing unused kernel image memory: 2724K [ 0.735152] Write protecting the kernel read-only data: 22528k [ 0.735697] Freeing unused kernel image memory: 2008K [ 0.735932] Freeing unused kernel image memory: 1184K [ 0.747937] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.747939] x86/mm: Checking user space page tables [ 0.759688] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.759690] Run /init as init process [ 0.882299] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 0.899598] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204) [ 0.899609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.899613] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204) [ 0.899618] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.899619] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204) [ 0.899623] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.899624] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204) [ 0.899628] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.899629] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.902918] ahci 0000:00:1f.2: version 3.0 [ 0.903791] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.907200] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.908535] libphy: r8169: probed [ 0.909089] r8169 0000:05:00.0 eth0: RTL8105e, 24:b6:fd:53:e5:24, XID 40a, IRQ 28 [ 0.919347] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode [ 0.919350] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 0.932207] scsi host0: ahci [ 0.932422] scsi host1: ahci [ 0.932580] scsi host2: ahci [ 0.933459] scsi host3: ahci [ 0.933587] scsi host4: ahci [ 0.933697] scsi host5: ahci [ 0.933746] ata1: SATA max UDMA/133 abar m2048@0xf7e06000 port 0xf7e06100 irq 29 [ 0.933747] ata2: DUMMY [ 0.933748] ata3: DUMMY [ 0.933748] ata4: DUMMY [ 0.933750] ata5: SATA max UDMA/133 abar m2048@0xf7e06000 port 0xf7e06300 irq 29 [ 0.933751] ata6: DUMMY [ 0.935932] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 1.003100] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.023131] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159583] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.159589] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.159951] hub 1-1:1.0: USB hub found [ 1.160063] hub 1-1:1.0: 6 ports detected [ 1.179712] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.179718] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.180055] hub 2-1:1.0: USB hub found [ 1.180132] hub 2-1:1.0: 8 ports detected [ 1.247136] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.250650] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.251106] ata1.00: ATA-8: WDC WD5000BPVT-75HXZT3, 03.01A03, max UDMA/133 [ 1.251110] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.254807] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.255271] ata1.00: configured for UDMA/133 [ 1.259370] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-7 1A03 PQ: 0 ANSI: 5 [ 1.259704] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.259822] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.259825] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.259842] sd 0:0:0:0: [sda] Write Protect is off [ 1.259844] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.259865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.324356] sda: sda1 sda2 sda3 < sda5 sda6 > [ 1.325334] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.415154] tsc: Refined TSC clocksource calibration: 2394.559 MHz [ 1.415176] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284235ba97, max_idle_ns: 440795203400 ns [ 1.415223] clocksource: Switched to clocksource tsc [ 1.419143] usb 1-1.2: new high-speed USB device number 3 using ehci-pci [ 1.419148] usb 2-1.6: new high-speed USB device number 3 using ehci-pci [ 1.442699] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.446385] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100 [ 1.452912] ata5.00: configured for UDMA/100 [ 1.474765] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5 [ 1.529802] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=2b17, bcdDevice= 1.00 [ 1.529805] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.529806] usb 1-1.2: Product: HP LaserJet 1020 [ 1.529808] usb 1-1.2: Manufacturer: Hewlett-Packard [ 1.529809] usb 1-1.2: SerialNumber: FN2940D [ 1.539873] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0138, bcdDevice=38.82 [ 1.539880] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.539884] usb 2-1.6: Product: USB2.0-CRW [ 1.539888] usb 2-1.6: Manufacturer: Generic [ 1.539891] usb 2-1.6: SerialNumber: 20090516388200000 [ 1.549327] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.549330] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.550469] usbcore: registered new interface driver usb-storage [ 1.552074] usbcore: registered new interface driver uas [ 1.553529] ums-realtek 2-1.6:1.0: USB Mass Storage device detected [ 1.557803] scsi host6: usb-storage 2-1.6:1.0 [ 1.557924] usbcore: registered new interface driver ums-realtek [ 1.563429] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.563537] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.600413] random: fast init done [ 1.607134] usb 1-1.4: new full-speed USB device number 4 using ehci-pci [ 1.647153] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.697196] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.697210] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.716301] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3002, bcdDevice= 0.01 [ 1.716308] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.795087] usb 1-1.5: new high-speed USB device number 5 using ehci-pci [ 1.967241] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=58c0, bcdDevice=14.07 [ 1.967243] usb 1-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.967245] usb 1-1.5: Product: Integrated Webcam [ 1.967246] usb 1-1.5: Manufacturer: CNFB010I185110015950 [ 1.967247] usb 1-1.5: SerialNumber: 0x0001 [ 2.092510] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 [ 2.570475] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 2.570755] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.738013] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.697274] random: crng init done [ 4.697280] random: 7 urandom warning(s) missed due to ratelimiting [ 5.068454] systemd[1]: Inserted module 'autofs4' [ 5.261279] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 5.279304] systemd[1]: Detected architecture x86-64. [ 5.314695] systemd[1]: Set hostname to . [ 8.314442] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 9.446359] systemd[1]: /lib/systemd/system/mongod.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/mongodb/mongod.pid → /run/mongodb/mongod.pid; please update the unit file accordingly. [ 9.637071] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. [ 9.757137] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 9.892448] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly. [ 9.949645] systemd[1]: Created slice system-modprobe.slice. [ 9.950047] systemd[1]: Created slice User and Session Slice. [ 9.950124] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.950368] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.950410] systemd[1]: Reached target User and Group Name Lookups. [ 9.950425] systemd[1]: Reached target Remote File Systems. [ 9.950439] systemd[1]: Reached target Slices. [ 9.964938] systemd[1]: Listening on Syslog Socket. [ 9.965080] systemd[1]: Listening on fsck to fsckd communication Socket. [ 9.965157] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 9.965382] systemd[1]: Listening on Journal Audit Socket. [ 9.965471] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.965594] systemd[1]: Listening on Journal Socket. [ 9.975662] systemd[1]: Listening on udev Control Socket. [ 9.975794] systemd[1]: Listening on udev Kernel Socket. [ 9.977016] systemd[1]: Mounting Huge Pages File System... [ 9.978428] systemd[1]: Mounting POSIX Message Queue File System... [ 9.980492] systemd[1]: Mounting Kernel Debug File System... [ 9.982368] systemd[1]: Mounting Kernel Trace File System... [ 9.984926] systemd[1]: Starting Journal Service... [ 9.986984] systemd[1]: Starting Set the console keyboard layout... [ 9.988973] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 9.990800] systemd[1]: Starting Load Kernel Module drm... [ 10.056755] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 10.056823] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 10.107096] systemd[1]: Starting Load Kernel Modules... [ 10.108371] systemd[1]: Starting Remount Root and Kernel File Systems... [ 10.110196] systemd[1]: Starting udev Coldplug all Devices... [ 10.111600] systemd[1]: Starting Uncomplicated firewall... [ 10.113453] systemd[1]: Started Read required files in advance. [ 10.115925] systemd[1]: Mounted Huge Pages File System. [ 10.116070] systemd[1]: Mounted POSIX Message Queue File System. [ 10.116187] systemd[1]: Mounted Kernel Debug File System. [ 10.116319] systemd[1]: Mounted Kernel Trace File System. [ 10.118412] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 10.290789] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 10.292857] systemd[1]: Finished Remount Root and Kernel File Systems. [ 10.294006] systemd[1]: Activating swap /swapfile... [ 10.313241] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 10.313331] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 10.314645] systemd[1]: Starting Load/Save Random Seed... [ 10.316649] systemd[1]: Starting Create System Users... [ 10.317593] systemd[1]: Finished Uncomplicated firewall. [ 10.496104] systemd[1]: Started Journal Service. [ 10.606122] systemd-journald[287]: Received client request to flush runtime journal. [ 11.071424] lp: driver loaded but no devices found [ 11.076445] ppdev: user-space parallel port driver [ 11.259161] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 17.625361] audit: type=1400 audit(1612746528.408:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=416 comm="apparmor_parser" [ 17.636810] audit: type=1400 audit(1612746528.420:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=415 comm="apparmor_parser" [ 17.636813] audit: type=1400 audit(1612746528.420:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=415 comm="apparmor_parser" [ 17.675008] audit: type=1400 audit(1612746528.456:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=413 comm="apparmor_parser" [ 17.758390] audit: type=1400 audit(1612746528.540:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=414 comm="apparmor_parser" [ 17.758395] audit: type=1400 audit(1612746528.540:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=414 comm="apparmor_parser" [ 17.830717] audit: type=1400 audit(1612746528.612:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=420 comm="apparmor_parser" [ 17.830769] audit: type=1400 audit(1612746528.612:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=417 comm="apparmor_parser" [ 17.867538] audit: type=1400 audit(1612746528.652:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=422 comm="apparmor_parser" [ 17.888592] audit: type=1400 audit(1612746528.672:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=423 comm="apparmor_parser" [ 23.212732] kauditd_printk_skb: 46 callbacks suppressed [ 23.212734] audit: type=1400 audit(1612746533.996:58): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=489 comm="apparmor_parser" [ 23.328066] audit: type=1400 audit(1612746534.112:59): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.syncplay.syncplay" pid=507 comm="apparmor_parser" [ 23.342362] audit: type=1400 audit(1612746534.124:60): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=492 comm="apparmor_parser" [ 23.464676] audit: type=1400 audit(1612746534.248:61): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.syncplay.syncplay-server" pid=508 comm="apparmor_parser" [ 23.579272] audit: type=1400 audit(1612746534.364:62): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.spotify.spotify" pid=506 comm="apparmor_parser" [ 23.713170] audit: type=1400 audit(1612746534.496:63): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.telegram-desktop.telegram-desktop" pid=509 comm="apparmor_parser" [ 23.726594] audit: type=1400 audit(1612746534.508:64): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.vlc.vlc" pid=510 comm="apparmor_parser" [ 25.472676] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ 25.474788] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS [ 25.573939] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input7 [ 26.495793] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 26.495794] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 26.495795] RAPL PMU: hw unit of domain package 2^-16 Joules [ 26.495796] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 26.685231] cryptd: max_cpu_qlen set to 1000 [ 27.405500] i915 0000:00:02.0: vgaarb: deactivate vga console [ 27.405919] Console: switching to colour dummy device 80x25 [ 27.406731] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 27.406733] [drm] Driver supports precise vblank timestamp query. [ 27.407964] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 27.436059] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 27.437108] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 27.437540] acpi device:32: registered as cooling_device4 [ 27.437631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 27.450107] fbcon: i915drmfb (fb0) is primary device [ 27.639783] Bluetooth: Core ver 2.22 [ 27.639802] NET: Registered protocol family 31 [ 27.639803] Bluetooth: HCI device and connection manager initialized [ 27.639807] Bluetooth: HCI socket layer initialized [ 27.639809] Bluetooth: L2CAP socket layer initialized [ 27.639812] Bluetooth: SCO socket layer initialized [ 28.048215] usbcore: registered new interface driver btusb [ 28.409641] Console: switching to colour frame buffer device 170x48 [ 28.430881] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 28.676124] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 28.679536] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 29.304649] usbcore: registered new interface driver ath3k [ 29.324956] usb 1-1.4: USB disconnect, device number 4 [ 30.071050] usb 1-1.4: new full-speed USB device number 6 using ehci-pci [ 30.183953] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3005, bcdDevice= 0.01 [ 30.183956] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 30.912184] ath: phy0: ASPM enabled: 0x42 [ 30.912188] ath: EEPROM regdomain: 0x60 [ 30.912188] ath: EEPROM indicates we should expect a direct regpair map [ 30.912190] ath: Country alpha2 being used: 00 [ 30.912191] ath: Regpair used: 0x60 [ 30.913971] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 30.914606] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffb0cac0ae0000, irq=19 [ 30.916764] mc: Linux media interface: v0.10 [ 30.938334] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 31.125773] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD87B1/3: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 31.125776] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 31.125777] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 31.125778] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 31.125779] snd_hda_codec_idt hdaudioC0D0: inputs: [ 31.125781] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xc [ 31.125782] snd_hda_codec_idt hdaudioC0D0: Mic=0xa [ 31.267664] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 31.267719] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 31.267769] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 32.072831] videodev: Linux video capture interface: v2.00 [ 34.163821] intel_rapl_common: Found RAPL domain package [ 34.163824] intel_rapl_common: Found RAPL domain core [ 34.163826] intel_rapl_common: Found RAPL domain uncore [ 34.163831] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 34.371119] uvcvideo: Found UVC 1.00 device Integrated Webcam (0bda:58c0) [ 34.379273] input: Integrated Webcam: Integrated W as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input12 [ 34.379376] usbcore: registered new interface driver uvcvideo [ 34.379377] USB Video Class driver (1.1.1) [ 34.489945] ath9k 0000:09:00.0 wlp9s0: renamed from wlan0 [ 52.856615] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 52.856620] Bluetooth: BNEP filters: protocol multicast [ 52.856641] Bluetooth: BNEP socket layer initialized [ 53.045991] NET: Registered protocol family 38 [ 67.328608] RTL8208 Fast Ethernet r8169-500:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE) [ 67.605775] r8169 0000:05:00.0 enp5s0: Link is Down [ 68.022986] audit: type=1400 audit(1612746578.804:65): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1040 comm="cups-browsed" capability=23 capname="sys_nice" [ 70.284467] wlp9s0: authenticate with d8:47:32:7a:79:f2 [ 70.297784] wlp9s0: send auth to d8:47:32:7a:79:f2 (try 1/3) [ 70.299616] wlp9s0: authenticated [ 70.299785] wlp9s0: associating with AP with corrupt probe response [ 70.307044] wlp9s0: associate with d8:47:32:7a:79:f2 (try 1/3) [ 70.310999] wlp9s0: RX AssocResp from d8:47:32:7a:79:f2 (capab=0x411 status=0 aid=3) [ 70.311242] wlp9s0: associated [ 71.300278] IPv6: ADDRCONF(NETDEV_CHANGE): wlp9s0: link becomes ready [ 83.601705] usblp 1-1.2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 [ 83.602096] usbcore: registered new interface driver usblp [ 85.419203] aufs 5.4.3-20200302 [ 89.836680] usblp0: removed [ 89.838329] usblp 1-1.2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 [ 107.863699] rfkill: input handler disabled [ 118.757947] rfkill: input handler enabled [ 118.766968] Bluetooth: RFCOMM TTY layer initialized [ 118.766981] Bluetooth: RFCOMM socket layer initialized [ 118.766987] Bluetooth: RFCOMM ver 1.11 [ 147.054464] rfkill: input handler disabled [ 152.383019] audit: type=1400 audit(1612746663.385:66): apparmor="DENIED" operation="capable" profile="/snap/core/10583/usr/lib/snapd/snap-confine" pid=2636 comm="snap-confine" capability=4 capname="fsetid" [ 177.079076] audit: type=1326 audit(1612746688.080:67): auid=1000 uid=1000 gid=1000 ses=3 pid=2636 comm="snap-store" exe="/snap/snap-store/518/usr/bin/snap-store" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f5256edf639 code=0x50000 [ 179.180547] audit: type=1107 audit(1612746690.185:68): pid=845 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/NetworkManager" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.15" pid=2636 label="snap.snap-store.ubuntu-software" peer_pid=846 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' [ 193.265506] audit: type=1107 audit(1612746704.279:69): pid=845 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.10" pid=2636 label="snap.snap-store.ubuntu-software" peer_pid=857 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' [ 193.266459] audit: type=1107 audit(1612746704.279:70): pid=845 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.10" pid=2636 label="snap.snap-store.ubuntu-software" peer_pid=857 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' [ 194.599202] audit: type=1107 audit(1612746705.612:71): pid=845 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.10" pid=2636 label="snap.snap-store.ubuntu-software" peer_pid=857 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' [ 194.599924] audit: type=1107 audit(1612746705.616:72): pid=845 uid=103 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.10" pid=2636 label="snap.snap-store.ubuntu-software" peer_pid=857 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=103 hostname=? addr=? terminal=?' [ 199.883856] audit: type=1400 audit(1612746710.897:73): apparmor="DENIED" operation="open" profile="snap.snap-store.ubuntu-software" name="/etc/PackageKit/Vendor.conf" pid=2636 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 304.725346] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 1) [ 304.725348] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 1) [ 304.725350] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) [ 304.725352] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1) [ 304.725353] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) [ 304.725356] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1) [ 304.726366] mce: CPU3: Core temperature/speed normal [ 304.726367] mce: CPU1: Core temperature/speed normal [ 304.726368] mce: CPU2: Package temperature/speed normal [ 304.726369] mce: CPU0: Package temperature/speed normal [ 304.726371] mce: CPU1: Package temperature/speed normal [ 304.726373] mce: CPU3: Package temperature/speed normal [ 314.423179] powercap intel-rapl:0: package locked by BIOS, monitoring only [ 348.342526] usblp0: removed [ 463.061870] audit: type=1400 audit(1612746974.103:74): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/sbin/mysqld" pid=4802 comm="apparmor_parser" [ 712.083842] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 524) [ 712.083843] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 524) [ 712.083846] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 681) [ 712.083847] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 681) [ 712.083849] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 681) [ 712.083852] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 681) [ 712.084839] mce: CPU1: Core temperature/speed normal [ 712.084840] mce: CPU3: Core temperature/speed normal [ 712.084842] mce: CPU2: Package temperature/speed normal [ 712.084843] mce: CPU0: Package temperature/speed normal [ 712.084844] mce: CPU3: Package temperature/speed normal [ 712.084847] mce: CPU1: Package temperature/speed normal [ 764.040143] usb 1-1.2: USB disconnect, device number 3 [ 781.081460] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 990.946421] PM: suspend entry (deep) [ 993.932727] Filesystems sync: 2.986 seconds [ 993.933180] Freezing user space processes ... (elapsed 0.167 seconds) done. [ 994.100202] OOM killer disabled. [ 994.100204] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 994.102050] printk: Suspending console(s) (use no_console_suspend to debug) [ 994.122835] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 994.141245] sd 0:0:0:0: [sda] Stopping disk [ 994.815180] ACPI: Preparing to enter system sleep state S3 [ 994.827054] PM: Saving platform NVS memory [ 994.827105] Disabling non-boot CPUs ... [ 994.827876] IRQ 31: no longer affine to CPU1 [ 994.829464] smpboot: CPU 1 is now offline [ 994.837814] IRQ 19: no longer affine to CPU2 [ 994.839423] smpboot: CPU 2 is now offline [ 994.845420] IRQ 16: no longer affine to CPU3 [ 994.845433] IRQ 23: no longer affine to CPU3 [ 994.846495] smpboot: CPU 3 is now offline [ 994.855005] ACPI: Low-level resume complete [ 994.855056] PM: Restoring platform NVS memory [ 994.856346] Enabling non-boot CPUs ... [ 994.856401] x86: Booting SMP configuration: [ 994.856402] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 994.859921] CPU1 is up [ 994.860011] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 994.863309] CPU2 is up [ 994.863389] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 994.866408] CPU3 is up [ 994.870074] ACPI: Waking up from system sleep state S3 [ 994.938080] ath: phy0: ASPM enabled: 0x42 [ 994.941060] sd 0:0:0:0: [sda] Starting disk [ 995.200410] usb 1-1.4: reset full-speed USB device number 6 using ehci-pci [ 995.204417] usb 2-1.6: reset high-speed USB device number 3 using ehci-pci [ 995.263759] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 995.265654] ata5.00: configured for UDMA/100 [ 995.308708] usb 1-1.4: device firmware changed [ 995.392333] usb 1-1.5: reset high-speed USB device number 5 using ehci-pci [ 995.548350] OOM killer enabled. [ 995.548353] Restarting tasks ... [ 995.563888] usb 1-1.4: USB disconnect, device number 6 [ 995.585166] done. [ 995.619756] video LNXVIDEO:00: Restoring backlight state [ 995.619988] PM: suspend exit [ 995.644306] usb 1-1.4: new full-speed USB device number 7 using ehci-pci [ 995.753250] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3002, bcdDevice= 0.01 [ 995.753254] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 996.233725] usb 1-1.4: USB disconnect, device number 7 [ 996.608222] usb 1-1.4: new full-speed USB device number 8 using ehci-pci [ 996.721112] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3005, bcdDevice= 0.01 [ 996.721115] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 997.924134] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 997.927664] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 998.170652] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 998.170956] ata1.00: configured for UDMA/133 [ 998.615935] RTL8208 Fast Ethernet r8169-500:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE) [ 998.894677] r8169 0000:05:00.0 enp5s0: Link is Down [ 999.880725] atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0). [ 999.880727] atkbd serio0: Use 'setkeycodes e00d ' to make it known. [ 1000.045048] wlp9s0: authenticate with d8:47:32:7a:79:f2 [ 1000.058526] wlp9s0: send auth to d8:47:32:7a:79:f2 (try 1/3) [ 1000.060257] wlp9s0: authenticated [ 1000.060669] wlp9s0: associating with AP with corrupt probe response [ 1000.067995] wlp9s0: associate with d8:47:32:7a:79:f2 (try 1/3) [ 1000.072032] wlp9s0: RX AssocResp from d8:47:32:7a:79:f2 (capab=0x411 status=0 aid=1) [ 1000.072186] wlp9s0: associated [ 1000.366626] IPv6: ADDRCONF(NETDEV_CHANGE): wlp9s0: link becomes ready [ 1069.889156] rfkill: input handler enabled [ 1073.199113] rfkill: input handler disabled