[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-66-generic (buildd@lgw01-22) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #108-Ubuntu SMP Wed Oct 7 15:21:40 UTC 2015 (Ubuntu 3.13.0-66.108-generic 3.13.11-ckt27) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bbaa0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbaa1000-0x00000000bbaa6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbaa7000-0x00000000bbbbcfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbbbd000-0x00000000bbc0efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbc0f000-0x00000000bbd07fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbd08000-0x00000000bbf0efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbf0f000-0x00000000bbf17fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbf18000-0x00000000bbf1efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbf1f000-0x00000000bbf64fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbf65000-0x00000000bbf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf9f000-0x00000000bbffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. R468/R418 /R468/R418 , BIOS 03NG.M001.20090701.HCW 07/01/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-D7FFF uncachable [ 0.000000] D8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 0BDC00000 mask FFFC00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 3GB, range: 1GB, type UC [ 0.000000] reg 1, base: 3040MB, range: 32MB, type UC [ 0.000000] reg 2, base: 0GB, range: 4GB, type WB [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB [ 0.000000] reg 4, base: 3036MB, range: 4MB, type UC [ 0.000000] total RAM covered: 4060M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3036MB, range: 4MB, type UC [ 0.000000] reg 3, base: 3040MB, range: 32MB, type UC [ 0.000000] reg 4, base: 4GB, range: 1GB, type WB [ 0.000000] e820: update [mem 0xbdc00000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000f7300-0x000f730f] mapped at [c00f7300] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] [ 0.000000] [mem 0x34000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01b9d000, 0x01b9dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35c1e000-0x36e06fff] [ 0.000000] ACPI: RSDP 000f7260 000024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT bbff859a 00006C (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: FACP bbfe8000 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT bbfe9000 0066B0 (v02 Intel CANTIGA 06040000 INTL 20050624) [ 0.000000] ACPI: FACS bbf9efc0 000040 [ 0.000000] ACPI: HPET bbffeefc 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG bbffef34 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC bbffef70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT bbffefd8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT bbff862e 0000B6 (v01 BrtRef DD01BRT 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT bbfe7000 0005F9 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT bbfe6000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT bbfe5000 00020F (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4228MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] BRK [0x01b9e000, 0x01b9efff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x3fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xbbaa0fff] [ 0.000000] node 0: [mem 0xbbaa7000-0xbbbbcfff] [ 0.000000] node 0: [mem 0xbbc0f000-0xbbd07fff] [ 0.000000] node 0: [mem 0xbbf0f000-0xbbf17fff] [ 0.000000] node 0: [mem 0xbbf1f000-0xbbf64fff] [ 0.000000] node 0: [mem 0x00000000-0x3fffffff] [ 0.000000] On node 0 totalpages: 1031324 [ 0.000000] free_area_init_node: node 0, pgdat c19a3780, node_mem_map f341e020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8457 pages used for memmap [ 0.000000] HighMem zone: 803073 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] [ 0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bd0000 s35520 r0 d21824 u57344 [ 0.000000] pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029540 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-66-generic root=UUID=05ae2bba-e1f1-44da-a1a6-14f8801e9458 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10485752 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:00140000) [ 0.000000] Memory: 4042796K/4125296K available (6559K kernel code, 645K rwdata, 2772K rodata, 880K init, 924K bss, 82500K reserved, 3212292K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc19c1000 - 0xc1a9d000 ( 880 kB) [ 0.000000] .data : 0xc1668140 - 0xc19c0640 (3425 kB) [ 0.000000] .text : 0xc1000000 - 0xc1668140 (6560 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f3008000 soft=f300a000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2161.240 MHz processor [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.48 BogoMIPS (lpj=8644960) [ 0.004006] pid_max: default: 32768 minimum: 301 [ 0.004039] Security Framework initialized [ 0.004063] AppArmor: AppArmor initialized [ 0.004065] Yama: becoming mindful. [ 0.004119] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004122] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004386] Initializing cgroup subsys memory [ 0.004396] Initializing cgroup subsys devices [ 0.004398] Initializing cgroup subsys freezer [ 0.004401] Initializing cgroup subsys blkio [ 0.004404] Initializing cgroup subsys perf_event [ 0.004407] Initializing cgroup subsys hugetlb [ 0.004437] CPU: Physical Processor ID: 0 [ 0.004438] CPU: Processor Core ID: 0 [ 0.004442] mce: CPU supports 6 MCE banks [ 0.004451] CPU0: Thermal monitoring enabled (TM2) [ 0.004454] process: using mwait in idle threads [ 0.004465] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.004465] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.004465] tlb_flushall_shift: -1 [ 0.004801] Freeing SMP alternatives memory: 32K (c1a9d000 - c1aa5000) [ 0.005874] ACPI: Core revision 20131115 [ 0.011792] ACPI: All ACPI Tables successfully acquired [ 0.012008] ftrace: allocating 27883 entries in 55 pages [ 0.020111] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020570] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063394] smpboot: CPU0: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz (fam: 06, model: 0f, stepping: 0d) [ 0.064000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.064000] perf_event_intel: PEBS disabled due to CPU errata [ 0.064000] ... version: 2 [ 0.064000] ... bit width: 40 [ 0.064000] ... generic registers: 2 [ 0.064000] ... value mask: 000000ffffffffff [ 0.064000] ... max period: 000000007fffffff [ 0.064000] ... fixed-purpose events: 3 [ 0.064000] ... event mask: 0000000700000003 [ 0.064000] CPU 1 irqstacks, hard=f30ec000 soft=f30ee000 [ 0.064000] x86: Booting SMP configuration: [ 0.008000] Initializing CPU#1 [ 0.064000] .... node #0, CPUs: #1 [ 0.075287] x86: Booted up 1 node, 2 CPUs [ 0.075291] smpboot: Total of 2 processors activated (8644.96 BogoMIPS) [ 0.075385] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.076160] devtmpfs: initialized [ 0.076256] EVM: security.selinux [ 0.076259] EVM: security.SMACK64 [ 0.076260] EVM: security.ima [ 0.076262] EVM: security.capability [ 0.076372] PM: Registering ACPI NVS region [mem 0xbbf65000-0xbbf9efff] (237568 bytes) [ 0.077610] pinctrl core: initialized pinctrl subsystem [ 0.077705] regulator-dummy: no parameters [ 0.077746] RTC time: 11:28:09, date: 10/27/15 [ 0.077796] NET: Registered protocol family 16 [ 0.077989] EISA bus registered [ 0.077992] cpuidle: using governor ladder [ 0.077994] cpuidle: using governor menu [ 0.078087] ACPI: bus type PCI registered [ 0.078090] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.078182] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.078185] PCI: not using MMCONFIG [ 0.078375] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.078603] PCI: PCI BIOS revision 3.00 entry at 0xfdbf0, last bus=8 [ 0.078605] PCI: Using configuration type 1 for base access [ 0.080022] bio: create slab at 0 [ 0.080109] ACPI: Added _OSI(Module Device) [ 0.080111] ACPI: Added _OSI(Processor Device) [ 0.080113] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.080116] ACPI: Added _OSI(Processor Aggregator Device) [ 0.082383] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.084395] ACPI: SSDT bbf1ac20 000265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.084768] ACPI: Dynamic OEM Table Load: [ 0.084771] ACPI: SSDT (null) 000265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.084981] ACPI: SSDT bbf18020 000C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.085332] ACPI: Dynamic OEM Table Load: [ 0.085335] ACPI: SSDT (null) 000C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.112288] ACPI: SSDT bbf19ca0 0001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.112681] ACPI: Dynamic OEM Table Load: [ 0.112684] ACPI: SSDT (null) 0001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.124085] ACPI: SSDT bbf19f20 00008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.124452] ACPI: Dynamic OEM Table Load: [ 0.124455] ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.140056] ACPI: Interpreter enabled [ 0.140081] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.140086] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.140103] ACPI: (supports S0 S3 S4 S5) [ 0.140106] ACPI: Using IOAPIC for interrupt routing [ 0.140129] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.140959] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.140961] PCI: Using MMCONFIG for extended config space [ 0.140983] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.141124] ACPI: No dock devices found. [ 0.141552] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.141569] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.144353] ACPI: Power Resource [FN00] (off) [ 0.144483] ACPI: Power Resource [FN01] (off) [ 0.148751] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.148758] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.148765] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.149640] PCI host bridge to bus 0000:00 [ 0.149645] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.149647] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.149650] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.149653] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.149655] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.149658] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.149661] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff] [ 0.149673] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.149701] DMAR: Forcing write-buffer flush capability [ 0.149703] DMAR: Disabling IOMMU for graphics on this chipset [ 0.149804] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.149822] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfc3fffff 64bit] [ 0.149833] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.149840] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807] [ 0.149954] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.149969] pci 0000:00:02.1: reg 0x10: [mem 0xfc400000-0xfc4fffff 64bit] [ 0.150141] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.150208] pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f] [ 0.150353] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.150419] pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f] [ 0.150566] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.150633] pci 0000:00:1a.2: reg 0x20: [io 0x1860-0x187f] [ 0.150791] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.150821] pci 0000:00:1a.7: reg 0x10: [mem 0xfc704800-0xfc704bff] [ 0.150948] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.151061] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.151086] pci 0000:00:1b.0: reg 0x10: [mem 0xfc500000-0xfc503fff 64bit] [ 0.151200] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.151269] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.151316] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.151435] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.151505] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.151551] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.151669] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.151742] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.151787] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.151906] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.151976] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.152030] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.152097] pci 0000:00:1d.0: reg 0x20: [io 0x1880-0x189f] [ 0.152242] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.152308] pci 0000:00:1d.1: reg 0x20: [io 0x18a0-0x18bf] [ 0.152457] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.152523] pci 0000:00:1d.2: reg 0x20: [io 0x18c0-0x18df] [ 0.152681] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.152711] pci 0000:00:1d.7: reg 0x10: [mem 0xfc704c00-0xfc704fff] [ 0.152839] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.152948] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.153083] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.153133] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 [ 0.153390] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.153423] pci 0000:00:1f.2: reg 0x10: [io 0x1818-0x181f] [ 0.153436] pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f] [ 0.153449] pci 0000:00:1f.2: reg 0x18: [io 0x1810-0x1817] [ 0.153462] pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b] [ 0.153475] pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ff] [ 0.153489] pci 0000:00:1f.2: reg 0x24: [mem 0xfc704000-0xfc7047ff] [ 0.153570] pci 0000:00:1f.2: PME# supported from D3hot [ 0.153672] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.153697] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit] [ 0.153732] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f] [ 0.153981] pci 0000:02:00.0: [168c:001c] type 00 class 0x020000 [ 0.154016] pci 0000:02:00.0: reg 0x10: [mem 0xf6000000-0xf600ffff 64bit] [ 0.154225] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.154259] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.154273] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.154279] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.154285] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.154294] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.154399] acpiphp: Slot [1] registered [ 0.154407] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 0.154413] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.154418] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.154427] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.154721] pci 0000:06:00.0: [11ab:4354] type 00 class 0x020000 [ 0.154900] pci 0000:06:00.0: reg 0x10: [mem 0xfa000000-0xfa003fff 64bit] [ 0.154999] pci 0000:06:00.0: reg 0x18: [io 0x4000-0x40ff] [ 0.155823] pci 0000:06:00.0: supports D1 D2 [ 0.155826] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.155988] pci 0000:06:00.0: System wakeup disabled by ACPI [ 0.156154] pci 0000:00:1c.3: PCI bridge to [bus 06-07] [ 0.156160] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.156166] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff] [ 0.156174] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.156283] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode) [ 0.156299] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.156301] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.156304] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.156307] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.156309] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.156312] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.156366] pci_bus 0000:00: on NUMA node 0 [ 0.156344] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) [ 0.156416] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 0.156485] ACPI: PCI Interrupt Link [LNKC] (IRQs *5) [ 0.156553] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [ 0.156622] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled. [ 0.156693] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 0.156762] ACPI: PCI Interrupt Link [LNKG] (IRQs *5) [ 0.156836] ACPI: PCI Interrupt Link [LNKH] (IRQs *5) [ 0.156546] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.156546] ACPI: \_SB_.PCI0: notify handler is installed [ 0.156546] Found 1 acpi root devices [ 0.156546] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.156546] ACPI : EC: 0 stale EC events cleared [ 0.156878] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.156878] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.156878] vgaarb: loaded [ 0.156878] vgaarb: bridge control possible 0000:00:02.0 [ 0.156878] SCSI subsystem initialized [ 0.156878] libata version 3.00 loaded. [ 0.156878] ACPI: bus type USB registered [ 0.156878] usbcore: registered new interface driver usbfs [ 0.156878] usbcore: registered new interface driver hub [ 0.156878] usbcore: registered new device driver usb [ 0.156878] PCI: Using ACPI for IRQ routing [ 0.156878] PCI: pci_cache_line_size set to 64 bytes [ 0.156878] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff] [ 0.156878] e820: reserve RAM buffer [mem 0xbbaa1000-0xbbffffff] [ 0.156878] e820: reserve RAM buffer [mem 0xbbbbd000-0xbbffffff] [ 0.156878] e820: reserve RAM buffer [mem 0xbbd08000-0xbbffffff] [ 0.156878] e820: reserve RAM buffer [mem 0xbbf18000-0xbbffffff] [ 0.156878] e820: reserve RAM buffer [mem 0xbbf65000-0xbbffffff] [ 0.156878] NetLabel: Initializing [ 0.156878] NetLabel: domain hash size = 128 [ 0.156878] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.156878] NetLabel: unlabeled traffic allowed by default [ 0.156878] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.156878] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.156878] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.161018] Switched to clocksource hpet [ 0.169274] AppArmor: AppArmor Filesystem Enabled [ 0.169318] pnp: PnP ACPI init [ 0.169342] ACPI: bus type PNP registered [ 0.169611] pnp 00:00: [dma 4] [ 0.169645] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.169678] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.169821] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.169826] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.169873] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.169948] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.169952] system 00:04: [io 0x0480-0x048f] has been reserved [ 0.169955] system 00:04: [io 0xffff] has been reserved [ 0.169958] system 00:04: [io 0xffff] has been reserved [ 0.169961] system 00:04: [io 0x0400-0x047f] could not be reserved [ 0.169964] system 00:04: [io 0x0480-0x048f] has been reserved [ 0.169967] system 00:04: [io 0x1180-0x11ff] has been reserved [ 0.169970] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.169973] system 00:04: [io 0x5000-0x500f] has been reserved [ 0.169976] system 00:04: [io 0xfe00] has been reserved [ 0.169980] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.170042] system 00:05: [io 0x06a0-0x06af] has been reserved [ 0.170045] system 00:05: [io 0x06b0-0x06ff] has been reserved [ 0.170049] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.170089] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.170129] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.170168] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.170338] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.170342] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.170345] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.170348] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.170351] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.170354] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.170357] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.170360] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.170364] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.170690] pnp: PnP ACPI: found 10 devices [ 0.170693] ACPI: bus type PNP unregistered [ 0.170698] PnPBIOS: Disabled by ACPI PNP [ 0.207812] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff 64bit] [ 0.207829] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.207833] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.207840] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.207846] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.207855] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 0.207859] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.207866] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.207871] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.207880] pci 0000:00:1c.3: PCI bridge to [bus 06-07] [ 0.207884] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.207891] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff] [ 0.207897] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.207906] pci 0000:00:1e.0: PCI bridge to [bus 08] [ 0.207923] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.207925] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.207928] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.207930] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.207933] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.207935] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff] [ 0.207938] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.207940] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff] [ 0.207943] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.207945] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.207948] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff] [ 0.207950] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.207953] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 0.207955] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff] [ 0.207958] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.207961] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] [ 0.207963] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] [ 0.207965] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] [ 0.207968] pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.207970] pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.207973] pci_bus 0000:08: resource 9 [mem 0xc0000000-0xfebfffff] [ 0.208023] NET: Registered protocol family 2 [ 0.208256] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.208272] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.208300] TCP: Hash tables configured (established 8192 bind 8192) [ 0.208329] TCP: reno registered [ 0.208332] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.208341] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.208401] NET: Registered protocol family 1 [ 0.208417] pci 0000:00:02.0: Video device with shadowed ROM [ 0.209974] PCI: CLS 64 bytes, default 64 [ 0.210039] Trying to unpack rootfs image as initramfs... [ 0.606415] Freeing initrd memory: 18340K (f5c1e000 - f6e07000) [ 0.606542] Simple Boot Flag at 0x37 set to 0x1 [ 0.606701] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3 [ 0.606709] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 [ 0.606796] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.606799] Scanning for low memory corruption every 60 seconds [ 0.607086] Initialise system trusted keyring [ 0.607137] audit: initializing netlink socket (disabled) [ 0.607154] type=2000 audit(1445945289.604:1): initialized [ 0.631819] bounce pool size: 64 pages [ 0.631833] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.633513] zbud: loaded [ 0.633606] VFS: Disk quotas dquot_6.5.2 [ 0.633665] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.634261] fuse init (API version 7.22) [ 0.634369] msgmni has been set to 1657 [ 0.634439] Key type big_key registered [ 0.635044] Key type asymmetric registered [ 0.635047] Asymmetric key parser 'x509' registered [ 0.635092] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.635135] io scheduler noop registered [ 0.635137] io scheduler deadline registered (default) [ 0.635170] io scheduler cfq registered [ 0.635442] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.635636] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X [ 0.635822] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.635927] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.635946] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.636029] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.636031] vesafb: scrolling: redraw [ 0.636033] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.636919] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 3072k, total 3072k [ 0.640615] Console: switching to colour frame buffer device 128x48 [ 0.644191] fb0: VESA VGA frame buffer device [ 0.644220] intel_idle: does not run on family 6 model 15 [ 0.644231] ipmi message handler version 39.2 [ 0.644448] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.644681] ACPI: AC Adapter [ADP1] (on-line) [ 0.644788] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.644931] ACPI: Lid Switch [LID0] [ 0.644979] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.644984] ACPI: Power Button [PWRB] [ 0.645028] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.645032] ACPI: Sleep Button [SLPB] [ 0.645113] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.645116] ACPI: Power Button [PWRF] [ 0.645193] ACPI: Fan [FAN0] (off) [ 0.645229] ACPI: Fan [FAN1] (off) [ 0.646938] Monitor-Mwait will be used to enter C-1 state [ 0.646943] Monitor-Mwait will be used to enter C-2 state [ 0.646947] Monitor-Mwait will be used to enter C-3 state [ 0.646951] tsc: Marking TSC unstable due to TSC halts in idle [ 0.646963] ACPI: acpi_idle registered with cpuidle [ 0.648339] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.648342] ACPI: Thermal Zone [TZ00] (49 C) [ 0.649502] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.649504] ACPI: Thermal Zone [TZ01] (49 C) [ 0.649536] GHES: HEST is not enabled! [ 0.649720] isapnp: Scanning for PnP cards... [ 0.649769] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.663339] Linux agpgart interface v0.103 [ 0.663457] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.663539] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.663999] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.664142] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.666258] brd: module loaded [ 0.666856] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.666864] ACPI: Battery Slot [BAT1] (battery present) [ 0.667446] loop: module loaded [ 0.667960] libphy: Fixed MDIO Bus: probed [ 0.668100] tun: Universal TUN/TAP device driver, 1.6 [ 0.668102] tun: (C) 1999-2004 Max Krasnyansky [ 0.668152] PPP generic driver version 2.4.2 [ 0.668199] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.668206] ehci-pci: EHCI PCI platform driver [ 0.668376] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.668384] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.668402] ehci-pci 0000:00:1a.7: debug port 1 [ 0.672328] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.672354] ehci-pci 0000:00:1a.7: irq 19, io mem 0xfc704800 [ 0.684035] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.684092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.684095] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.684098] usb usb1: Product: EHCI Host Controller [ 0.684100] usb usb1: Manufacturer: Linux 3.13.0-66-generic ehci_hcd [ 0.684102] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.684219] hub 1-0:1.0: USB hub found [ 0.684228] hub 1-0:1.0: 6 ports detected [ 0.684524] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.684531] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.684547] ehci-pci 0000:00:1d.7: debug port 1 [ 0.688442] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.688467] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfc704c00 [ 0.700032] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.700080] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.700083] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.700085] usb usb2: Product: EHCI Host Controller [ 0.700088] usb usb2: Manufacturer: Linux 3.13.0-66-generic ehci_hcd [ 0.700090] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.700193] hub 2-0:1.0: USB hub found [ 0.700201] hub 2-0:1.0: 6 ports detected [ 0.700369] ehci-platform: EHCI generic platform driver [ 0.700382] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.700384] ohci-pci: OHCI PCI platform driver [ 0.700398] ohci-platform: OHCI generic platform driver [ 0.700406] uhci_hcd: USB Universal Host Controller Interface driver [ 0.700528] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.700537] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.700581] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 0.700636] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.700639] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.700642] usb usb3: Product: UHCI Host Controller [ 0.700644] usb usb3: Manufacturer: Linux 3.13.0-66-generic uhci_hcd [ 0.700647] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.700749] hub 3-0:1.0: USB hub found [ 0.700758] hub 3-0:1.0: 2 ports detected [ 0.700954] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.700961] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.701006] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 0.701061] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.701064] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.701067] usb usb4: Product: UHCI Host Controller [ 0.701069] usb usb4: Manufacturer: Linux 3.13.0-66-generic uhci_hcd [ 0.701072] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.701173] hub 4-0:1.0: USB hub found [ 0.701180] hub 4-0:1.0: 2 ports detected [ 0.701375] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.701382] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.701412] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860 [ 0.701469] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.701472] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.701475] usb usb5: Product: UHCI Host Controller [ 0.701477] usb usb5: Manufacturer: Linux 3.13.0-66-generic uhci_hcd [ 0.701480] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.701581] hub 5-0:1.0: USB hub found [ 0.701588] hub 5-0:1.0: 2 ports detected [ 0.701785] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.701791] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.701823] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.701878] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.701881] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.701883] usb usb6: Product: UHCI Host Controller [ 0.701886] usb usb6: Manufacturer: Linux 3.13.0-66-generic uhci_hcd [ 0.701888] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.701990] hub 6-0:1.0: USB hub found [ 0.701997] hub 6-0:1.0: 2 ports detected [ 0.702194] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.702201] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.702234] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 0.702289] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.702292] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.702295] usb usb7: Product: UHCI Host Controller [ 0.702297] usb usb7: Manufacturer: Linux 3.13.0-66-generic uhci_hcd [ 0.702300] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.702402] hub 7-0:1.0: USB hub found [ 0.702410] hub 7-0:1.0: 2 ports detected [ 0.702611] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.702617] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.702659] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 0.702716] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.702719] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.702722] usb usb8: Product: UHCI Host Controller [ 0.702724] usb usb8: Manufacturer: Linux 3.13.0-66-generic uhci_hcd [ 0.702727] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.702826] hub 8-0:1.0: USB hub found [ 0.702834] hub 8-0:1.0: 2 ports detected [ 0.703016] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.705384] i8042: Detected active multiplexing controller, rev 1.1 [ 0.706515] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.706523] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.706555] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.706579] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.706605] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.706725] mousedev: PS/2 mouse device common for all mice [ 0.707077] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.707112] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.707201] device-mapper: uevent: version 1.0.3 [ 0.707278] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.707304] platform eisa.0: Probing EISA bus 0 [ 0.707307] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.707310] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.707312] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.707315] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.707317] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.707320] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.707322] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.707324] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.707327] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.707329] platform eisa.0: EISA: Detected 0 cards [ 0.707339] cpufreq-nforce2: No nForce2 chipset. [ 0.707343] ledtrig-cpu: registered to indicate activity on CPUs [ 0.707505] TCP: cubic registered [ 0.707626] NET: Registered protocol family 10 [ 0.707852] NET: Registered protocol family 17 [ 0.707872] Key type dns_resolver registered [ 0.708083] Using IPI No-Shortcut mode [ 0.708167] Loading compiled-in X.509 certificates [ 0.712252] Loaded X.509 cert 'Magrathea: Glacier signing key: fe03b670cfe578ff5f4c7052a3a77047448841c4' [ 0.712268] registered taskstats version 1 [ 0.715003] Key type trusted registered [ 0.719798] Key type encrypted registered [ 0.719805] AppArmor: AppArmor sha1 policy hashing enabled [ 0.719808] IMA: No TPM chip found, activating TPM-bypass! [ 0.720390] regulator-dummy: disabling [ 0.720446] Magic number: 3:147:480 [ 0.720555] rtc_cmos 00:06: setting system clock to 2015-10-27 11:28:10 UTC (1445945290) [ 0.721116] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.721118] EDD information not available. [ 0.721169] PM: Hibernation image not present or could not be loaded. [ 0.732211] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.960638] isapnp: No Plug & Play device found [ 0.961086] Freeing unused kernel memory: 880K (c19c1000 - c1a9d000) [ 0.961169] Write protecting the kernel text: 6564k [ 0.961282] Write protecting the kernel read-only data: 2776k [ 0.961284] NX-protecting the kernel data: 5724k [ 0.978541] systemd-udevd[95]: starting version 204 [ 1.014096] sky2: driver version 1.30 [ 1.014426] sky2 0000:06:00.0: Yukon-2 FE+ chip revision 0 [ 1.014764] sky2 0000:06:00.0: irq 43 for MSI/MSI-X [ 1.019593] sky2 0000:06:00.0 eth0: addr 00:13:77:ba:be:92 [ 1.023976] ahci 0000:00:1f.2: version 3.0 [ 1.028145] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 1.028229] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.028279] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.028283] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 1.061020] scsi0 : ahci [ 1.062802] scsi1 : ahci [ 1.062909] scsi2 : ahci [ 1.064703] scsi3 : ahci [ 1.069892] scsi4 : ahci [ 1.074363] scsi5 : ahci [ 1.074463] ata1: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704100 irq 44 [ 1.074468] ata2: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704180 irq 44 [ 1.074471] ata3: DUMMY [ 1.074473] ata4: DUMMY [ 1.074477] ata5: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704300 irq 44 [ 1.074480] ata6: SATA max UDMA/133 abar m2048@0xfc704000 port 0xfc704380 irq 44 [ 1.392087] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.396028] ata1.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133 [ 1.396032] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.396784] ata1.00: configured for UDMA/133 [ 1.396983] scsi 0:0:0:0: Direct-Access ATA ST500LT012-9WS14 0001 PQ: 0 ANSI: 5 [ 1.397201] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.397268] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.397272] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.397355] sd 0:0:0:0: [sda] Write Protect is off [ 1.397359] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.397395] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.465615] sda: sda1 sda2 < sda5 sda6 > [ 1.466165] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.716086] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.764572] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0, board id: 0, fw id: 437321 [ 1.799337] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 [ 1.806116] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/133 [ 1.806121] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.812470] ata2.00: configured for UDMA/133 [ 1.812658] scsi 1:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2AR1 PQ: 0 ANSI: 5 [ 1.812855] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.812869] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.812872] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.812955] sd 1:0:0:0: [sdb] Write Protect is off [ 1.812959] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.813001] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.132057] ata5: SATA link down (SStatus 0 SControl 300) [ 2.181392] sdb: sdb1 sdb2 [ 2.181880] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.452089] ata6: SATA link down (SStatus 0 SControl 300) [ 3.117873] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.418516] random: nonblocking pool is initialized [ 31.154117] Adding 1951740k swap on /dev/sda5. Priority:-1 extents:1 across:1951740k FS [ 31.213187] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.327191] systemd-udevd[285]: starting version 204 [ 31.605650] lp: driver loaded but no devices found [ 31.758598] [drm] Initialized drm 1.1.0 20060810 [ 31.802300] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.842859] [drm] Memory usable by graphics device = 2048M [ 31.842866] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 31.842869] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 31.842899] Console: switching to colour dummy device 80x25 [ 31.878723] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 31.878739] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 31.878741] [drm] Driver supports precise vblank timestamp query. [ 31.878812] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 31.917600] cfg80211: Calling CRDA to update world regulatory domain [ 31.993368] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 31.997231] type=1400 audit(1445945321.772:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=527 comm="apparmor_parser" [ 31.997240] type=1400 audit(1445945321.772:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=527 comm="apparmor_parser" [ 31.997246] type=1400 audit(1445945321.772:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=527 comm="apparmor_parser" [ 31.998143] type=1400 audit(1445945321.772:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=527 comm="apparmor_parser" [ 31.998153] type=1400 audit(1445945321.772:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=527 comm="apparmor_parser" [ 31.998564] type=1400 audit(1445945321.772:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=527 comm="apparmor_parser" [ 32.134374] ath5k 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 32.134509] ath5k 0000:02:00.0: registered as 'phy0' [ 32.236032] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 32.286301] fbcon: inteldrmfb (fb0) is primary device [ 32.471022] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 32.689770] samsung_laptop: detected SABI interface: SwSmi@ [ 32.689772] samsung_laptop: Backlight controlled by ACPI video driver [ 32.826568] ath: EEPROM regdomain: 0x65 [ 32.826569] ath: EEPROM indicates we should expect a direct regpair map [ 32.826571] ath: Country alpha2 being used: 00 [ 32.826572] ath: Regpair used: 0x65 [ 32.873466] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 32.875170] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 33.228132] Console: switching to colour frame buffer device 170x48 [ 33.233154] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 33.233155] i915 0000:00:02.0: registered panic notifier [ 33.239147] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 33.259721] acpi device:07: registered as cooling_device4 [ 33.260361] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13 [ 33.263748] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 33.263902] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 33.263911] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 33.263916] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 33.263921] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 33.263923] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 33.263927] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 33.263929] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 33.264580] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 33.294733] SKU: Nid=0x1d sku_cfg=0x40058235 [ 33.294737] SKU: port_connectivity=0x1 [ 33.294739] SKU: enable_pcbeep=0x0 [ 33.294741] SKU: check_sum=0x00000005 [ 33.294742] SKU: customization=0x00000082 [ 33.294744] SKU: external_amp=0x6 [ 33.294746] SKU: platform_type=0x1 [ 33.294747] SKU: swap=0x0 [ 33.294748] SKU: override=0x1 [ 33.295061] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 33.295064] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 33.295066] hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 33.295067] mono: mono_out=0x0 [ 33.295069] inputs: [ 33.295071] Internal Mic=0x19 [ 33.295074] Mic=0x18 [ 33.295076] realtek: No valid SSID, checking pincfg 0x40058235 for NID 0x1d [ 33.295078] realtek: Enabling init ASM_ID=0x8235 CODEC_ID=10ec0269 [ 33.303630] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 33.319398] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 33.702668] cfg80211: World regulatory domain updated: [ 33.702674] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 33.702677] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.702680] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.702682] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 33.702684] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.702686] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.905424] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 34.131793] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: user_xattr [ 34.273238] EXT4-fs (sdb2): mounting ext3 file system using the ext4 subsystem [ 34.372721] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: user_xattr [ 41.881882] init: failsafe main process (1205) killed by TERM signal [ 42.251895] Bluetooth: Core ver 2.17 [ 42.251924] NET: Registered protocol family 31 [ 42.251926] Bluetooth: HCI device and connection manager initialized [ 42.251938] Bluetooth: HCI socket layer initialized [ 42.251942] Bluetooth: L2CAP socket layer initialized [ 42.251949] Bluetooth: SCO socket layer initialized [ 42.283945] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 42.283950] Bluetooth: BNEP filters: protocol multicast [ 42.283962] Bluetooth: BNEP socket layer initialized [ 42.362600] Bluetooth: RFCOMM TTY layer initialized [ 42.362615] Bluetooth: RFCOMM socket layer initialized [ 42.362626] Bluetooth: RFCOMM ver 1.11 [ 42.651992] type=1400 audit(1445945332.424:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1323 comm="apparmor_parser" [ 42.652002] type=1400 audit(1445945332.424:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1323 comm="apparmor_parser" [ 42.652625] type=1400 audit(1445945332.428:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1323 comm="apparmor_parser" [ 42.762166] type=1400 audit(1445945332.536:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1377 comm="apparmor_parser" [ 42.762178] type=1400 audit(1445945332.536:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1377 comm="apparmor_parser" [ 42.762184] type=1400 audit(1445945332.536:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1377 comm="apparmor_parser" [ 42.762768] type=1400 audit(1445945332.536:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1377 comm="apparmor_parser" [ 42.762775] type=1400 audit(1445945332.536:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1377 comm="apparmor_parser" [ 42.763071] type=1400 audit(1445945332.536:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1377 comm="apparmor_parser" [ 42.766763] type=1400 audit(1445945332.540:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1379 comm="apparmor_parser" [ 42.899519] init: cups main process (1328) killed by HUP signal [ 42.899536] init: cups main process ended, respawning [ 43.434869] init: samba-ad-dc main process (1421) terminated with status 1 [ 43.534733] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 43.543609] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 43.589927] sky2 0000:06:00.0 eth0: enabling interface [ 43.590578] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 43.598078] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 45.348878] wlan0: authenticate with c8:6c:87:41:c4:83 [ 45.360822] wlan0: send auth to c8:6c:87:41:c4:83 (try 1/3) [ 45.362930] wlan0: authenticated [ 45.363150] ath5k 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 45.364118] wlan0: associate with c8:6c:87:41:c4:83 (try 1/3) [ 45.366605] wlan0: RX AssocResp from c8:6c:87:41:c4:83 (capab=0x411 status=0 aid=1) [ 45.367518] wlan0: associated [ 45.367537] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 45.368734] cfg80211: Calling CRDA for country: RU [ 45.372956] ath: EEPROM regdomain: 0x8283 [ 45.372961] ath: EEPROM indicates we should expect a country code [ 45.372963] ath: doing EEPROM country->regdmn map search [ 45.372965] ath: country maps to regdmn code: 0x3 [ 45.372967] ath: Country alpha2 being used: RU [ 45.372969] ath: Regpair used: 0x3 [ 45.372971] ath: regdomain 0x8283 dynamically updated by country IE [ 45.372973] cfg80211: Regulatory domain changed to country: RU [ 45.372975] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 45.372977] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 45.372980] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 45.477352] init: plymouth-upstart-bridge main process ended, respawning [ 45.491846] init: plymouth-upstart-bridge main process (1804) terminated with status 1 [ 45.491868] init: plymouth-upstart-bridge main process ended, respawning [ 45.757960] wlan0: deauthenticating from c8:6c:87:41:c4:83 by local choice (reason=2) [ 45.758187] cfg80211: Calling CRDA to update world regulatory domain [ 45.758264] wlan0: authenticate with c8:6c:87:41:c4:83 [ 45.758481] wlan0: send auth to c8:6c:87:41:c4:83 (try 1/3) [ 45.761679] wlan0: authenticated [ 45.762056] ath5k 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 45.762258] cfg80211: World regulatory domain updated: [ 45.762261] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 45.762264] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 45.762267] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 45.762269] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 45.762271] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 45.762274] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 45.764067] wlan0: associate with c8:6c:87:41:c4:83 (try 1/3) [ 45.766475] wlan0: RX AssocResp from c8:6c:87:41:c4:83 (capab=0x411 status=0 aid=1) [ 45.766758] wlan0: associated [ 45.766802] cfg80211: Calling CRDA for country: RU [ 45.770250] ath: EEPROM regdomain: 0x8283 [ 45.770256] ath: EEPROM indicates we should expect a country code [ 45.770259] ath: doing EEPROM country->regdmn map search [ 45.770260] ath: country maps to regdmn code: 0x3 [ 45.770263] ath: Country alpha2 being used: RU [ 45.770264] ath: Regpair used: 0x3 [ 45.770267] ath: regdomain 0x8283 dynamically updated by country IE [ 45.770268] cfg80211: Regulatory domain changed to country: RU [ 45.770270] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 45.770273] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 45.770275] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 47.895874] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 47.903636] vboxdrv: Found 2 processor cores. [ 47.908579] vboxdrv: fAsync=0 offMin=0x208 offMax=0x1ce5 [ 47.908724] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 47.908727] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007). [ 47.974387] vboxpci: IOMMU not found (not registered) [ 48.119275] init: winbind main process (2250) terminated with status 1 [ 48.119294] init: winbind main process ended, respawning [ 48.170666] init: winbind main process (2258) terminated with status 1 [ 48.170687] init: winbind main process ended, respawning [ 48.215698] init: winbind main process (2290) terminated with status 1 [ 48.215720] init: winbind main process ended, respawning [ 48.255820] init: winbind main process (2296) terminated with status 1 [ 48.255840] init: winbind main process ended, respawning [ 48.294218] init: winbind main process (2307) terminated with status 1 [ 48.294242] init: winbind main process ended, respawning [ 48.332355] init: winbind main process (2331) terminated with status 1 [ 48.332378] init: winbind main process ended, respawning [ 48.373404] init: winbind main process (2345) terminated with status 1 [ 48.373424] init: winbind main process ended, respawning [ 48.411633] init: winbind main process (2352) terminated with status 1 [ 48.411653] init: winbind main process ended, respawning [ 48.489093] init: winbind main process (2368) terminated with status 1 [ 48.489113] init: winbind main process ended, respawning [ 48.540894] init: winbind main process (2397) terminated with status 1 [ 48.540917] init: winbind main process ended, respawning [ 48.602493] init: winbind main process (2411) terminated with status 1 [ 48.602515] init: winbind respawning too fast, stopped [ 72.811450] audit_printk_skb: 135 callbacks suppressed [ 72.811456] type=1400 audit(1445945362.035:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3201 comm="apparmor_parser" [ 72.811468] type=1400 audit(1445945362.035:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3201 comm="apparmor_parser" [ 72.812202] type=1400 audit(1445945362.039:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3201 comm="apparmor_parser" [ 115.318151] init: plymouth-stop pre-start process (3997) terminated with status 1 [ 157.250392] perf samples too long (2525 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 1310.336559] perf samples too long (5004 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [ 8300.927003] [sched_delayed] \x014CE: hpet increased min_delta_ns to 20115 nsec [10673.720019] [sched_delayed] \x014CE: hpet increased min_delta_ns to 30172 nsec [11519.001267] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000 [13430.060279] cfg80211: Calling CRDA to update world regulatory domain [13430.192811] cfg80211: World regulatory domain updated: [13430.192816] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [13430.192819] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13430.192821] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13430.192824] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [13430.192826] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13430.192828] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [13445.255373] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [48237.440233] type=1400 audit(1445993526.669:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=6732 comm="apparmor_parser" [48237.440252] type=1400 audit(1445993526.669:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6732 comm="apparmor_parser" [48237.441460] type=1400 audit(1445993526.669:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6732 comm="apparmor_parser" [48818.882043] wlan0: authenticate with c8:6c:87:41:c4:83 [48818.882271] wlan0: send auth to c8:6c:87:41:c4:83 (try 1/3) [48818.883710] wlan0: authenticated [48818.883891] ath5k 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [48818.884200] wlan0: associate with c8:6c:87:41:c4:83 (try 1/3) [48818.887198] wlan0: RX AssocResp from c8:6c:87:41:c4:83 (capab=0x411 status=0 aid=1) [48818.887494] wlan0: associated [48818.887528] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [48818.887617] cfg80211: Calling CRDA for country: RU [48818.892076] ath: EEPROM regdomain: 0x8283 [48818.892080] ath: EEPROM indicates we should expect a country code [48818.892083] ath: doing EEPROM country->regdmn map search [48818.892085] ath: country maps to regdmn code: 0x3 [48818.892087] ath: Country alpha2 being used: RU [48818.892088] ath: Regpair used: 0x3 [48818.892091] ath: regdomain 0x8283 dynamically updated by country IE [48818.892093] cfg80211: Regulatory domain changed to country: RU [48818.892094] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [48818.892097] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [48818.892099] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm) [53373.002922] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000 [56253.002239] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000 [60693.002672] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000 [63813.002257] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000 [64653.003183] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000