[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-74-generic-pae (buildd@phianna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #109-Ubuntu SMP Tue Dec 9 17:00:00 UTC 2014 (Ubuntu 3.2.0-74.109-generic-pae 3.2.64) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077fd0000 (usable) [ 0.000000] BIOS-e820: 0000000077fd0000 - 0000000077fe5600 (reserved) [ 0.000000] BIOS-e820: 0000000077fe5600 - 0000000077ff8000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077ff8000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) [ 0.000000] BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq nx6325 (EY351EA#AKN)/30B0, BIOS 68TT2 Ver. F.07 05/08/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x77fd0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C0FFF write-protect [ 0.000000] C1000-C3FFF write-back [ 0.000000] C4000-C4FFF write-protect [ 0.000000] C5000-C7FFF write-back [ 0.000000] C8000-C8FFF write-protect [ 0.000000] C9000-CBFFF write-back [ 0.000000] CC000-CCFFF write-protect [ 0.000000] CD000-CFFFF write-back [ 0.000000] D0000-D0FFF write-protect [ 0.000000] D1000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 base 0060000000 mask FFF0000000 write-back [ 0.000000] 3 base 0070000000 mask FFF8000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 02000000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037a00000 page 2M [ 0.000000] 0037a00000 - 0037bfe000 page 4k [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffa000-2000000 [ 0.000000] RAMDISK: 3647e000 - 37237000 [ 0.000000] ACPI: RSDP 000f7a90 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 77fe57b8 0005C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FACP 77fe5684 000F4 (v04 HP 0944 00000003 HP 00000001) [ 0.000000] ACPI: DSDT 77fe5a60 0F6D3 (v01 HP SB400 00010000 MSFT 0100000E) [ 0.000000] ACPI: FACS 77ff7e80 00040 [ 0.000000] ACPI: SLIC 77fe5814 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: APIC 77fe598c 00062 (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 77fe59f0 0003C (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 77fe5a2c 00032 (v02 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 77ff5133 00059 (v01 HP HPQNLP 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 77ff518c 00206 (v01 HP PSSTBLID 00000001 HP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1027MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037bfe [ 0.000000] HighMem 0x00037bfe -> 0x00077fd0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00077fd0 [ 0.000000] On node 0 totalpages: 491359 [ 0.000000] free_area_init_node: node 0, pgdat c1875c00, node_mem_map f557e200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2056 pages used for memmap [ 0.000000] HighMem zone: 261066 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] SB4X0 revision 0x82 [ 0.000000] Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bd5000 s34240 r0 d23104 u57344 [ 0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487519 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-74-generic-pae root=UUID=3bc47a88-1982-4704-8066-e29ecc2f4a1e ro resume=UUID=ab2411e6-49dc-4962-8964-fcf24d842d12 quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7863296 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:00077fd0) [ 0.000000] Memory: 1916952k/1965888k available (5853k kernel code, 48484k reserved, 2863k data, 748k init, 1052488k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc1884000 - 0xc193f000 ( 748 kB) [ 0.000000] .data : 0xc15b753c - 0xc1883440 (2863 kB) [ 0.000000] .text : 0xc1000000 - 0xc15b753c (5853 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1994.994 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.98 BogoMIPS (lpj=7979976) [ 0.008014] pid_max: default: 32768 minimum: 301 [ 0.008044] Security Framework initialized [ 0.008073] AppArmor: AppArmor initialized [ 0.008076] Yama: becoming mindful. [ 0.008155] Mount-cache hash table entries: 512 [ 0.008322] Initializing cgroup subsys cpuacct [ 0.008329] Initializing cgroup subsys memory [ 0.008339] Initializing cgroup subsys devices [ 0.008343] Initializing cgroup subsys freezer [ 0.008346] Initializing cgroup subsys blkio [ 0.008355] Initializing cgroup subsys perf_event [ 0.008381] CPU: Physical Processor ID: 0 [ 0.008384] CPU: Processor Core ID: 0 [ 0.008389] mce: CPU supports 5 MCE banks [ 0.008400] using AMD E400 aware idle routine [ 0.012718] ACPI: Core revision 20110623 [ 0.024042] ftrace: allocating 26163 entries in 52 pages [ 0.028094] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028541] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.068254] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 0.072003] Performance Events: AMD PMU driver. [ 0.072003] ... version: 0 [ 0.072003] ... bit width: 48 [ 0.072003] ... generic registers: 4 [ 0.072003] ... value mask: 0000ffffffffffff [ 0.072003] ... max period: 00007fffffffffff [ 0.072003] ... fixed-purpose events: 0 [ 0.072003] ... event mask: 000000000000000f [ 0.072003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.072003] CPU 1 irqstacks, hard=f50ca000 soft=f50cc000 [ 0.072003] Booting Node 0, Processors #1 Ok. [ 0.072003] smpboot cpu 1: start_ip = 9b000 [ 0.012000] Initializing CPU#1 [ 0.156075] NMI watchdog enabled, takes one hw-pmu counter. [ 0.156102] Brought up 2 CPUs [ 0.156105] Total of 2 processors activated (7980.05 BogoMIPS). [ 0.156101] System has AMD C1E enabled [ 0.156101] Switch to broadcast mode on CPU1 [ 0.156674] Switch to broadcast mode on CPU0 [ 0.156674] devtmpfs: initialized [ 0.156674] EVM: security.selinux [ 0.156674] EVM: security.SMACK64 [ 0.156674] EVM: security.capability [ 0.156674] PM: Registering ACPI NVS region at 77fe5600 (76288 bytes) [ 0.156674] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.157296] print_constraints: dummy: [ 0.157339] RTC time: 6:58:22, date: 01/07/15 [ 0.157388] NET: Registered protocol family 16 [ 0.157425] Trying to unpack rootfs image as initramfs... [ 0.157555] EISA bus registered [ 0.157561] node 0 link 0: io port [1000, fffff] [ 0.157565] TOM: 0000000080000000 aka 2048M [ 0.157569] node 0 link 0: mmio [f0000000, ffffffff] [ 0.157573] node 0 link 0: mmio [e0000000, efffffff] [ 0.157577] node 0 link 0: mmio [c8000000, dfffffff] [ 0.157580] node 0 link 0: mmio [c0000000, c7ffffff] [ 0.157583] node 0 link 0: mmio [a0000, bffff] [ 0.157587] node 0 link 0: mmio [80000000, bfffffff] [ 0.157590] bus: [00, ff] on node 0 link 0 [ 0.157594] bus: 00 index 0 [io 0x0000-0xffff] [ 0.157597] bus: 00 index 1 [mem 0x80000000-0xfcffffffff] [ 0.157600] bus: 00 index 2 [mem 0x000a0000-0x000bffff] [ 0.157618] ACPI: bus type pci registered [ 0.157699] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.157703] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.157706] PCI: Using MMCONFIG for extended config space [ 0.157708] PCI: Using configuration type 1 for base access [ 0.172070] bio: create slab at 0 [ 0.172189] ACPI: Added _OSI(Module Device) [ 0.172192] ACPI: Added _OSI(Processor Device) [ 0.172194] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.172197] ACPI: Added _OSI(Processor Aggregator Device) [ 0.174036] ACPI: EC: Look up EC in DSDT [ 0.276095] ACPI: Interpreter enabled [ 0.276105] ACPI: (supports S0 S3 S4 S5) [ 0.276123] ACPI: Using IOAPIC for interrupt routing [ 0.276593] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.277240] ACPI: Power Resource [C22D] (off) [ 0.277897] ACPI: Power Resource [C204] (off) [ 0.278525] ACPI: Power Resource [C221] (on) [ 0.280108] ACPI: Power Resource [C360] (off) [ 0.280166] ACPI: Power Resource [C361] (off) [ 0.280225] ACPI: Power Resource [C362] (off) [ 0.280283] ACPI: Power Resource [C363] (off) [ 0.280838] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.281118] ACPI: No dock devices found. [ 0.281121] HEST: Table not found. [ 0.281127] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.284436] ACPI: PCI Root Bridge [C079] (domain 0000 [bus 00-ff]) [ 0.291038] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.291042] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.291045] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.291049] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfedfffff] (ignored) [ 0.291052] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored) [ 0.291056] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000dffff] (ignored) [ 0.291068] pci 0000:00:00.0: [1002:5950] type 0 class 0x000600 [ 0.291105] pci 0000:00:01.0: [1002:5a3f] type 1 class 0x000604 [ 0.291154] pci 0000:00:04.0: [1002:5a36] type 1 class 0x000604 [ 0.291198] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.291202] pci 0000:00:04.0: PME# disabled [ 0.291220] pci 0000:00:05.0: [1002:5a37] type 1 class 0x000604 [ 0.291260] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.291264] pci 0000:00:05.0: PME# disabled [ 0.291282] pci 0000:00:06.0: [1002:5a38] type 1 class 0x000604 [ 0.291323] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.291326] pci 0000:00:06.0: PME# disabled [ 0.291376] pci 0000:00:12.0: [1002:4379] type 0 class 0x000101 [ 0.291404] pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] [ 0.291419] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] [ 0.291435] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] [ 0.291449] pci 0000:00:12.0: reg 1c: [io 0x7018-0x701b] [ 0.291465] pci 0000:00:12.0: reg 20: [io 0x7020-0x702f] [ 0.291479] pci 0000:00:12.0: reg 24: [mem 0xd4409000-0xd44091ff] [ 0.291495] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.291553] pci 0000:00:12.0: supports D1 D2 [ 0.291576] pci 0000:00:13.0: [1002:4374] type 0 class 0x000c03 [ 0.291597] pci 0000:00:13.0: reg 10: [mem 0xd4401000-0xd4401fff] [ 0.291699] pci 0000:00:13.1: [1002:4375] type 0 class 0x000c03 [ 0.291719] pci 0000:00:13.1: reg 10: [mem 0xd4402000-0xd4402fff] [ 0.291824] pci 0000:00:13.2: [1002:4373] type 0 class 0x000c03 [ 0.291850] pci 0000:00:13.2: reg 10: [mem 0xd4403000-0xd4403fff] [ 0.291964] pci 0000:00:13.2: supports D1 D2 [ 0.291966] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.291973] pci 0000:00:13.2: PME# disabled [ 0.292006] pci 0000:00:14.0: [1002:4372] type 0 class 0x000c05 [ 0.292038] pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] [ 0.292053] pci 0000:00:14.0: reg 14: [mem 0xd4404000-0xd44043ff] [ 0.292117] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.292178] pci 0000:00:14.1: [1002:4376] type 0 class 0x000101 [ 0.292203] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.292219] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.292234] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.292248] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.292262] pci 0000:00:14.1: reg 20: [io 0x7040-0x704f] [ 0.292356] pci 0000:00:14.2: [1002:437b] type 0 class 0x000403 [ 0.292392] pci 0000:00:14.2: reg 10: [mem 0xd4408000-0xd440bfff 64bit] [ 0.292509] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.292515] pci 0000:00:14.2: PME# disabled [ 0.292538] pci 0000:00:14.3: [1002:4377] type 0 class 0x000601 [ 0.292649] pci 0000:00:14.4: [1002:4371] type 1 class 0x000604 [ 0.292721] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.292746] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.292767] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.292787] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.292821] PCI: peer root bus 00 res updated from pci conf [ 0.292851] pci 0000:01:05.0: [1002:5975] type 0 class 0x000300 [ 0.292860] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff pref] [ 0.292867] pci 0000:01:05.0: reg 14: [io 0x6000-0x60ff] [ 0.292873] pci 0000:01:05.0: reg 18: [mem 0xd4300000-0xd430ffff] [ 0.292890] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.292904] pci 0000:01:05.0: supports D1 D2 [ 0.292922] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.292928] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff] [ 0.292932] pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd43fffff] [ 0.292937] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] [ 0.292966] pci 0000:00:04.0: PCI bridge to [bus 10-10] [ 0.292971] pci 0000:00:04.0: bridge window [io 0x4000-0x5fff] [ 0.292975] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.293006] pci 0000:00:05.0: PCI bridge to [bus 20-20] [ 0.293011] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] [ 0.293015] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] [ 0.293065] pci 0000:30:00.0: [14e4:4312] type 0 class 0x000280 [ 0.293084] pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff] [ 0.293207] pci 0000:30:00.0: supports D1 D2 [ 0.293227] pci 0000:30:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.293239] pci 0000:00:06.0: PCI bridge to [bus 30-30] [ 0.293245] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] [ 0.293298] pci 0000:02:01.0: [14e4:169c] type 0 class 0x000200 [ 0.293338] pci 0000:02:01.0: reg 10: [mem 0xd4000000-0xd400ffff] [ 0.293521] pci 0000:02:01.0: PME# supported from D3hot D3cold [ 0.293528] pci 0000:02:01.0: PME# disabled [ 0.293566] pci 0000:02:04.0: [104c:8039] type 2 class 0x000607 [ 0.293599] pci 0000:02:04.0: reg 10: [mem 0xd4010000-0xd4010fff] [ 0.293652] pci 0000:02:04.0: supports D1 D2 [ 0.293655] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot [ 0.293661] pci 0000:02:04.0: PME# disabled [ 0.293691] pci 0000:02:04.1: [104c:803a] type 0 class 0x000c00 [ 0.293724] pci 0000:02:04.1: reg 10: [mem 0xd4011000-0xd40117ff] [ 0.293742] pci 0000:02:04.1: reg 14: [mem 0xd4014000-0xd4017fff] [ 0.293870] pci 0000:02:04.1: supports D1 D2 [ 0.293873] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot [ 0.293880] pci 0000:02:04.1: PME# disabled [ 0.293909] pci 0000:02:04.2: [104c:803b] type 0 class 0x000180 [ 0.293939] pci 0000:02:04.2: reg 10: [mem 0xd4018000-0xd4018fff] [ 0.294073] pci 0000:02:04.2: supports D1 D2 [ 0.294075] pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot [ 0.294082] pci 0000:02:04.2: PME# disabled [ 0.294112] pci 0000:02:04.3: [104c:803c] type 0 class 0x000805 [ 0.294141] pci 0000:02:04.3: reg 10: [mem 0xd4019000-0xd40190ff] [ 0.294276] pci 0000:02:04.3: supports D1 D2 [ 0.294278] pci 0000:02:04.3: PME# supported from D0 D1 D2 D3hot [ 0.294285] pci 0000:02:04.3: PME# disabled [ 0.294366] pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) [ 0.294380] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd42fffff] [ 0.294387] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.294390] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode) [ 0.294394] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.294456] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] [ 0.294478] pci_bus 0000:00: on NUMA node 0 [ 0.294482] ACPI: PCI Interrupt Routing Table [\_SB_.C079._PRT] [ 0.294624] ACPI: PCI Interrupt Routing Table [\_SB_.C079.C07A._PRT] [ 0.294659] ACPI: PCI Interrupt Routing Table [\_SB_.C079.C0E5._PRT] [ 0.294839] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.294844] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.294847] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.304185] ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled. [ 0.304251] ACPI: PCI Interrupt Link [C12C] (IRQs 10 11) *0, disabled. [ 0.304316] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *0, disabled. [ 0.304376] ACPI: PCI Interrupt Link [C12E] (IRQs 10 11) *0, disabled. [ 0.304437] ACPI: PCI Interrupt Link [C12F] (IRQs 10 11) *0, disabled. [ 0.304501] ACPI: PCI Interrupt Link [C130] (IRQs 9) *0, disabled. [ 0.304564] ACPI: PCI Interrupt Link [C131] (IRQs 10 11) *0, disabled. [ 0.304632] ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5 [ 0.304803] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.304809] vgaarb: loaded [ 0.304811] vgaarb: bridge control possible 0000:01:05.0 [ 0.304978] i2c-core: driver [aat2870] using legacy suspend method [ 0.304981] i2c-core: driver [aat2870] using legacy resume method [ 0.305075] SCSI subsystem initialized [ 0.308019] libata version 3.00 loaded. [ 0.308019] usbcore: registered new interface driver usbfs [ 0.308019] usbcore: registered new interface driver hub [ 0.308019] usbcore: registered new device driver usb [ 0.308019] PCI: Using ACPI for IRQ routing [ 0.317857] PCI: pci_cache_line_size set to 64 bytes [ 0.317896] pci 0000:00:14.2: address space collision: [mem 0xd4408000-0xd440bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd4409000-0xd44091ff] [ 0.317980] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.317984] reserve RAM buffer: 0000000077fd0000 - 0000000077ffffff [ 0.318114] NetLabel: Initializing [ 0.318116] NetLabel: domain hash size = 128 [ 0.318118] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.318132] NetLabel: unlabeled traffic allowed by default [ 0.327734] AppArmor: AppArmor Filesystem Enabled [ 0.327778] pnp: PnP ACPI init [ 0.327801] ACPI: bus type pnp registered [ 0.327937] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.327940] pnp 00:00: [mem 0x000e0000-0x000fffff] [ 0.327943] pnp 00:00: [mem 0x00100000-0x77ffffff] [ 0.328056] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.328060] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.328064] system 00:00: [mem 0x00100000-0x77ffffff] could not be reserved [ 0.328069] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.331225] pnp 00:01: [bus 00-ff] [ 0.331228] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.331231] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.331234] pnp 00:01: [io 0x0d00-0xffff window] [ 0.331237] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.331240] pnp 00:01: [mem 0x80000000-0xfedfffff window] [ 0.331243] pnp 00:01: [mem 0xfee01000-0xffffffff window] [ 0.331246] pnp 00:01: [mem 0x000d4000-0x000dffff window] [ 0.331352] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.331646] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (disabled) [ 0.331727] pnp 00:03: [io 0x0520-0x052f] [ 0.331730] pnp 00:03: [io 0x0530-0x053f] [ 0.331733] pnp 00:03: [mem 0xfed40000-0xfed44fff] [ 0.331768] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.331779] pnp 00:04: [io 0x00f0-0x00ff] [ 0.331795] pnp 00:04: [irq 13] [ 0.331830] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.331843] pnp 00:05: [io 0x0000-0x000f] [ 0.331845] pnp 00:05: [io 0x0080-0x008f] [ 0.331848] pnp 00:05: [io 0x00c0-0x00df] [ 0.331851] pnp 00:05: [dma 4] [ 0.331889] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.331900] pnp 00:06: [io 0x0061] [ 0.331936] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.331947] pnp 00:07: [io 0x0070-0x0071] [ 0.331950] pnp 00:07: [io 0x0072-0x0073] [ 0.331958] pnp 00:07: [irq 8] [ 0.331994] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.332033] pnp 00:08: [io 0x0060] [ 0.332036] pnp 00:08: [io 0x0064] [ 0.332043] pnp 00:08: [irq 1] [ 0.332082] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.332098] pnp 00:09: [irq 12] [ 0.332138] pnp 00:09: Plug and Play ACPI device, IDs SYN0118 SYN0100 SYN0002 PNP0f13 (active) [ 0.332265] pnp 00:0a: [io 0x0010-0x001f] [ 0.332268] pnp 00:0a: [io 0x002e-0x002f] [ 0.332271] pnp 00:0a: [io 0x004e-0x004f] [ 0.332273] pnp 00:0a: [io 0x0092] [ 0.332276] pnp 00:0a: [io 0x00b0-0x00b1] [ 0.332278] pnp 00:0a: [io 0x040b] [ 0.332281] pnp 00:0a: [io 0x04d0-0x04d1] [ 0.332283] pnp 00:0a: [io 0x04d6] [ 0.332286] pnp 00:0a: [io 0x0500-0x051f] [ 0.332288] pnp 00:0a: [io 0x0c00-0x0c01] [ 0.332291] pnp 00:0a: [io 0x0c14] [ 0.332293] pnp 00:0a: [io 0x0c50-0x0c51] [ 0.332296] pnp 00:0a: [io 0x0c52] [ 0.332298] pnp 00:0a: [io 0x0c6c] [ 0.332300] pnp 00:0a: [io 0x0c6f] [ 0.332303] pnp 00:0a: [io 0x0cd4-0x0cdf] [ 0.332306] pnp 00:0a: [mem 0xffb00000-0xffbfffff] [ 0.332309] pnp 00:0a: [mem 0xfff00000-0xffffffff] [ 0.332391] system 00:0a: [io 0x040b] has been reserved [ 0.332395] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.332402] system 00:0a: [io 0x04d6] has been reserved [ 0.332406] system 00:0a: [io 0x0500-0x051f] has been reserved [ 0.332409] system 00:0a: [io 0x0c00-0x0c01] has been reserved [ 0.332412] system 00:0a: [io 0x0c14] has been reserved [ 0.332415] system 00:0a: [io 0x0c50-0x0c51] has been reserved [ 0.332419] system 00:0a: [io 0x0c52] has been reserved [ 0.332422] system 00:0a: [io 0x0c6c] has been reserved [ 0.332425] system 00:0a: [io 0x0c6f] has been reserved [ 0.332428] system 00:0a: [io 0x0cd4-0x0cdf] has been reserved [ 0.332433] system 00:0a: [mem 0xffb00000-0xffbfffff] could not be reserved [ 0.332437] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved [ 0.332441] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.332800] pnp 00:0b: [io 0x8000-0x802f] [ 0.332803] pnp 00:0b: [io 0x8100-0x811f] [ 0.332806] pnp 00:0b: [mem 0xe0000000-0xefffffff] [ 0.332808] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.332894] system 00:0b: [io 0x8000-0x802f] has been reserved [ 0.332898] system 00:0b: [io 0x8100-0x811f] has been reserved [ 0.332901] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.332905] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.332909] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.333754] pnp 00:0c: [mem 0x000d3000-0x000d3fff] [ 0.333758] pnp 00:0c: [mem 0x78000000-0x7fffffff] [ 0.333761] pnp 00:0c: [mem 0xfee00000-0xfee00fff] [ 0.333849] system 00:0c: [mem 0x000d3000-0x000d3fff] has been reserved [ 0.333853] system 00:0c: [mem 0x78000000-0x7fffffff] has been reserved [ 0.333856] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.333860] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.333876] pnp: PnP ACPI: found 13 devices [ 0.333878] ACPI: ACPI bus type pnp unregistered [ 0.333882] PnPBIOS: Disabled by ACPI PNP [ 0.370664] Switching to clocksource acpi_pm [ 0.372023] PCI: max bus depth: 2 pci_try_num: 3 [ 0.372023] pci 0000:00:12.0: BAR 6: assigned [mem 0x80000000-0x8007ffff pref] [ 0.372023] pci 0000:00:14.2: BAR 0: assigned [mem 0x80080000-0x80083fff 64bit] [ 0.372023] pci 0000:00:14.2: BAR 0: set to [mem 0x80080000-0x80083fff 64bit] (PCI address [0x80080000-0x80083fff]) [ 0.372023] pci 0000:00:14.4: BAR 15: assigned [mem 0x84000000-0x87ffffff pref] [ 0.372023] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] [ 0.372023] pci 0000:01:05.0: BAR 6: assigned [mem 0xd4320000-0xd433ffff pref] [ 0.372023] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.372023] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff] [ 0.372023] pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd43fffff] [ 0.372023] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] [ 0.372023] pci 0000:00:04.0: PCI bridge to [bus 10-10] [ 0.372023] pci 0000:00:04.0: bridge window [io 0x4000-0x5fff] [ 0.372023] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.372023] pci 0000:00:05.0: PCI bridge to [bus 20-20] [ 0.372023] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] [ 0.372023] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] [ 0.372023] pci 0000:00:06.0: PCI bridge to [bus 30-30] [ 0.372023] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] [ 0.372023] pci 0000:02:04.0: BAR 16: assigned [mem 0x88000000-0x8bffffff] [ 0.372023] pci 0000:02:04.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref] [ 0.372023] pci 0000:02:04.0: BAR 14: assigned [io 0x1000-0x10ff] [ 0.372023] pci 0000:02:04.0: BAR 13: assigned [io 0x1400-0x14ff] [ 0.372023] pci 0000:02:04.0: CardBus bridge to [bus 03-06] [ 0.372023] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] [ 0.372023] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] [ 0.372023] pci 0000:02:04.0: bridge window [mem 0x84000000-0x87ffffff pref] [ 0.372023] pci 0000:02:04.0: bridge window [mem 0x88000000-0x8bffffff] [ 0.372023] pci 0000:00:14.4: PCI bridge to [bus 02-03] [ 0.372023] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] [ 0.372023] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd42fffff] [ 0.372023] pci 0000:00:14.4: bridge window [mem 0x84000000-0x87ffffff pref] [ 0.372023] pci 0000:00:04.0: setting latency timer to 64 [ 0.372023] pci 0000:00:05.0: setting latency timer to 64 [ 0.372023] pci 0000:00:06.0: setting latency timer to 64 [ 0.372023] pci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.372023] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.372023] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff] [ 0.372023] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.372023] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] [ 0.372023] pci_bus 0000:01: resource 1 [mem 0xd4300000-0xd43fffff] [ 0.372023] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] [ 0.372023] pci_bus 0000:10: resource 0 [io 0x4000-0x5fff] [ 0.372023] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd3ffffff] [ 0.372023] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] [ 0.372023] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] [ 0.372023] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] [ 0.372023] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.372023] pci_bus 0000:02: resource 1 [mem 0xd4000000-0xd42fffff] [ 0.372023] pci_bus 0000:02: resource 2 [mem 0x84000000-0x87ffffff pref] [ 0.372023] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.372023] pci_bus 0000:02: resource 5 [mem 0x80000000-0xfcffffffff] [ 0.372023] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.372023] pci_bus 0000:03: resource 0 [io 0x1400-0x14ff] [ 0.372023] pci_bus 0000:03: resource 1 [io 0x1000-0x10ff] [ 0.372023] pci_bus 0000:03: resource 2 [mem 0x84000000-0x87ffffff pref] [ 0.372023] pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff] [ 0.372023] NET: Registered protocol family 2 [ 0.375072] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.375391] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.376125] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.376483] TCP: Hash tables configured (established 131072 bind 65536) [ 0.376486] TCP reno registered [ 0.376490] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.376503] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.376613] NET: Registered protocol family 1 [ 0.376628] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.376636] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.376673] pci 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.376716] pci 0000:00:13.0: PCI INT A disabled [ 0.376726] pci 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.376747] pci 0000:00:13.1: PCI INT A disabled [ 0.376760] pci 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.376784] pci 0000:00:13.2: PCI INT A disabled [ 0.376813] pci 0000:01:05.0: Boot video device [ 0.376838] PCI: CLS 64 bytes, default 64 [ 0.377333] audit: initializing netlink socket (disabled) [ 0.377344] type=2000 audit(1420613902.372:1): initialized [ 0.404093] highmem bounce pool size: 64 pages [ 0.404099] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.406613] VFS: Disk quotas dquot_6.5.2 [ 0.406686] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.407385] fuse init (API version 7.17) [ 0.407501] msgmni has been set to 1688 [ 0.407899] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.407933] io scheduler noop registered [ 0.407936] io scheduler deadline registered [ 0.407943] io scheduler cfq registered (default) [ 0.408246] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.408275] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.411948] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.412105] ACPI: AC Adapter [C1C3] (on-line) [ 0.412199] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.412207] ACPI: Sleep Button [C266] [ 0.412259] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.412297] ACPI: Lid Switch [C267] [ 0.412348] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.412352] ACPI: Power Button [PWRF] [ 0.412455] ACPI: Fan [C364] (off) [ 0.412505] ACPI: Fan [C365] (off) [ 0.412557] ACPI: Fan [C366] (off) [ 0.412607] ACPI: Fan [C367] (off) [ 0.412876] ACPI: processor limited to max C-state 1 [ 0.422037] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.422040] ACPI: Thermal Zone [TZ1] (57 C) [ 0.425067] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.425070] ACPI: Thermal Zone [TZ2] (55 C) [ 0.435203] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.435206] ACPI: Thermal Zone [TZ3] (25 C) [ 0.435240] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.435251] ACPI: Battery Slot [C1C5] (battery absent) [ 0.435260] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.435269] ACPI: Battery Slot [C1C4] (battery absent) [ 0.435308] ERST: Table is not found! [ 0.435310] GHES: HEST is not enabled! [ 0.435418] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.435926] isapnp: Scanning for PnP cards... [ 0.441756] ACPI: Battery Slot [C1C5] (battery absent) [ 0.485611] ACPI: Battery Slot [C1C4] (battery absent) [ 0.533411] Freeing initrd memory: 14052k freed [ 0.793160] isapnp: No Plug & Play device found [ 0.844609] Linux agpgart interface v0.103 [ 0.847230] brd: module loaded [ 0.848475] loop: module loaded [ 0.848798] pata_acpi 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.848872] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.849394] Fixed MDIO Bus: probed [ 0.849426] tun: Universal TUN/TAP device driver, 1.6 [ 0.849428] tun: (C) 1999-2004 Max Krasnyansky [ 0.849521] PPP generic driver version 2.4.2 [ 0.849704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.849726] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.849755] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.849835] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 0.849903] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4403000 [ 0.860061] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.860288] hub 1-0:1.0: USB hub found [ 0.860294] hub 1-0:1.0: 8 ports detected [ 0.860417] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.860435] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.860452] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.860524] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.860543] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd4401000 [ 0.920206] hub 2-0:1.0: USB hub found [ 0.920219] hub 2-0:1.0: 4 ports detected [ 0.920310] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.920329] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.920404] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 0.920423] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd4402000 [ 0.980204] hub 3-0:1.0: USB hub found [ 0.980216] hub 3-0:1.0: 4 ports detected [ 0.980312] uhci_hcd: USB Universal Host Controller Interface driver [ 0.980400] usbcore: registered new interface driver libusual [ 0.980463] i8042: PNP: PS/2 Controller [PNP0303:C21E,PNP0f13:C21F] at 0x60,0x64 irq 1,12 [ 0.982185] i8042: Detected active multiplexing controller, rev 1.1 [ 0.982871] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.982878] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.982917] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.982950] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.982984] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.983184] mousedev: PS/2 mouse device common for all mice [ 0.983503] rtc_cmos 00:07: RTC can wake from S4 [ 0.983673] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.983705] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.983776] device-mapper: uevent: version 1.0.3 [ 0.983893] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.983920] EISA: Probing bus 0 at eisa.0 [ 0.983924] EISA: Cannot allocate resource for mainboard [ 0.983927] Cannot allocate resource for EISA slot 1 [ 0.983929] Cannot allocate resource for EISA slot 2 [ 0.983932] Cannot allocate resource for EISA slot 3 [ 0.983935] Cannot allocate resource for EISA slot 4 [ 0.983938] Cannot allocate resource for EISA slot 5 [ 0.983941] Cannot allocate resource for EISA slot 6 [ 0.983944] Cannot allocate resource for EISA slot 7 [ 0.983946] Cannot allocate resource for EISA slot 8 [ 0.983949] EISA: Detected 0 cards. [ 0.983965] cpufreq-nforce2: No nForce2 chipset. [ 0.983968] cpuidle: using governor ladder [ 0.983970] cpuidle: using governor menu [ 0.983972] EFI Variables Facility v0.08 2004-May-17 [ 0.984285] TCP cubic registered [ 0.984435] NET: Registered protocol family 10 [ 0.985105] NET: Registered protocol family 17 [ 0.985110] Registering the dns_resolver key type [ 0.985143] Using IPI No-Shortcut mode [ 0.985350] PM: Checking hibernation image partition UUID=ab2411e6-49dc-4962-8964-fcf24d842d12 [ 1.006441] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.018967] PM: Hibernation image not present or could not be loaded. [ 1.018987] registered taskstats version 1 [ 1.028618] Magic number: 15:569:973 [ 1.028756] rtc_cmos 00:07: setting system clock to 2015-01-07 06:58:23 UTC (1420613903) [ 1.028768] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 (2 cpu cores) (version 2.20.00) [ 1.028816] powernow-k8: fid 0xc (2000 MHz), vid 0x13 [ 1.028819] powernow-k8: fid 0xa (1800 MHz), vid 0x15 [ 1.028821] powernow-k8: fid 0x8 (1600 MHz), vid 0x17 [ 1.028823] powernow-k8: fid 0x0 (800 MHz), vid 0x1e [ 1.028892] powernow-k8: ph2 null fid transition 0xc [ 1.028967] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.028969] EDD information not available. [ 1.029226] Freeing unused kernel memory: 748k freed [ 1.029738] Write protecting the kernel text: 5856k [ 1.029763] Write protecting the kernel read-only data: 2392k [ 1.029766] NX-protecting the kernel data: 4384k [ 1.053006] udevd[87]: starting version 175 [ 1.100687] xor: automatically using best checksumming function: pIII_sse [ 1.120019] pIII_sse : 5838.000 MB/sec [ 1.120023] xor: using function: pIII_sse (5838.000 MB/sec) [ 1.130649] device-mapper: dm-raid45: initialized v0.2594b [ 1.178807] scsi0 : pata_atiixp [ 1.188640] scsi1 : pata_atiixp [ 1.189183] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x7040 irq 14 [ 1.189187] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x7048 irq 15 [ 1.202714] sata_sil 0000:00:12.0: version 2.4 [ 1.202721] sata_sil 0000:00:12.0: quirky BIOS, skipping spindown on poweroff and hibernation [ 1.204639] sdhci: Secure Digital Host Controller Interface driver [ 1.204644] sdhci: Copyright(c) Pierre Ossman [ 1.204674] scsi2 : sata_sil [ 1.204922] scsi3 : sata_sil [ 1.205126] ata3: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd4409080 irq 16 [ 1.205131] ata4: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd44090c0 irq 16 [ 1.209815] tg3.c:v3.121 (November 2, 2011) [ 1.209853] tg3 0000:02:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.307861] tg3 0000:02:01.0: eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:17:08:32:42:be [ 1.307868] tg3 0000:02:01.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0]) [ 1.307873] tg3 0000:02:01.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.307877] tg3 0000:02:01.0: eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 1.356639] ata1.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HQ04, max MWDMA2 [ 1.372567] ata1.00: configured for MWDMA2 [ 1.378578] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HQ04 PQ: 0 ANSI: 5 [ 1.383729] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.383734] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.383910] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.383985] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.516044] usb 3-1: new full-speed USB device number 2 using ohci_hcd [ 1.524091] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.532385] ata3.00: ATA-7: FUJITSU MHV2080BH PL, 892C, max UDMA/100 [ 1.532389] ata3.00: 156301488 sectors, multi 16: LBA48 [ 1.548388] ata3.00: configured for UDMA/100 [ 1.548566] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2080B 892C PQ: 0 ANSI: 5 [ 1.548758] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.548798] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.548843] sd 2:0:0:0: [sda] Write Protect is off [ 1.548847] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.548876] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.663206] sda: sda1 sda2 < sda5 > [ 1.663793] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.872077] ata4: SATA link down (SStatus 0 SControl 300) [ 1.873868] sdhci-pci 0000:02:04.3: SDHCI controller found [104c:803c] (rev 0) [ 1.873893] sdhci-pci 0000:02:04.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.873963] mmc0: no vmmc regulator found [ 1.874003] Registered led device: mmc0:: [ 1.875064] mmc0: SDHCI controller on PCI [0000:02:04.3] using PIO [ 1.876374] firewire_ohci 0000:02:04.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.932128] firewire_ohci: Added fw-ohci device 0000:02:04.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 2.432197] firewire_core: created device fw0: GUID 00023f9929a1360c, S400 [ 7.195991] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 7.195997] EXT4-fs (sda1): write access will be enabled during recovery [ 15.761028] EXT4-fs (sda1): orphan cleanup on readonly fs [ 15.761042] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170064 [ 15.761147] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170052 [ 15.761191] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2623246 [ 15.761211] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2622300 [ 15.761230] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3670033 [ 15.761292] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170086 [ 15.761310] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170084 [ 16.163657] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 135817 [ 16.163681] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170062 [ 16.163734] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 168930 [ 16.163753] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 169966 [ 16.177622] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 169916 [ 16.177675] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 168485 [ 16.178326] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 136766 [ 16.183981] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 136629 [ 16.184018] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 169968 [ 16.184037] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 142991 [ 16.193957] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 134895 [ 16.193980] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170152 [ 16.193999] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 136879 [ 16.194020] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170162 [ 16.194038] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170161 [ 16.194056] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170146 [ 16.194074] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170158 [ 16.194091] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170156 [ 16.194109] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170155 [ 16.194126] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170137 [ 16.194144] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170150 [ 16.194169] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 142871 [ 16.194187] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 170135 [ 16.194205] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 142892 [ 16.206768] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 140811 [ 16.232782] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2623467 [ 16.232804] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2623801 [ 16.232867] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2623761 [ 16.234420] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2623713 [ 16.234441] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2623671 [ 16.242541] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2621946 [ 16.242562] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2623361 [ 16.242580] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2623256 [ 16.284952] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3167459 [ 16.292254] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3167455 [ 16.292274] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3670021 [ 16.292292] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 132068 [ 16.292311] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 136464 [ 16.321750] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 132137 [ 16.321773] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 169899 [ 16.321792] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 169872 [ 16.321810] EXT4-fs (sda1): 48 orphan inodes deleted [ 16.321813] EXT4-fs (sda1): recovery complete [ 16.389341] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 44.825027] Adding 1964028k swap on /dev/sda5. Priority:-1 extents:1 across:1964028k [ 44.840097] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.874615] udevd[440]: starting version 175 [ 44.931138] lp: driver loaded but no devices found [ 44.939077] b43-pci-bridge 0000:30:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 44.939094] b43-pci-bridge 0000:30:00.0: setting latency timer to 64 [ 44.956116] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 44.956128] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 44.956137] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 44.956146] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 45.020204] ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 [ 45.024948] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 45.025479] cfg80211: Calling CRDA to update world regulatory domain [ 45.056509] b43-phy0: Broadcom 4311 WLAN found (core revision 10) [ 45.063640] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8200, revision 0 [ 45.074536] wmi: Mapper loaded [ 45.095446] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 45.124198] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 45.124205] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124209] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 45.124213] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124216] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 45.124220] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124223] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 45.124226] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124229] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 45.124233] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124236] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 45.124239] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124242] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 45.124246] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124249] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 45.124252] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124255] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 45.124259] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124261] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 45.124265] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124268] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 45.124272] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124275] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 45.124278] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124281] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 45.124285] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 45.124288] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 45.124291] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 45.157596] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 45.158385] Registered led device: b43-phy0::tx [ 45.158411] Registered led device: b43-phy0::rx [ 45.158438] Registered led device: b43-phy0::radio [ 45.158459] Broadcom 43xx driver loaded [ Features: PNL ] [ 45.207783] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 45.207900] [Firmware Bug]: _BCQ is used instead of _BQC [ 45.240046] acpi device:02: registered as cooling_device6 [ 45.240235] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input4 [ 45.240578] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16) [ 45.240658] ACPI: Video Device [C07B] (multi-head: yes rom: no post: no) [ 45.300437] [drm] Initialized drm 1.1.0 20060810 [ 45.479431] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 45.529685] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30b0] [ 45.529714] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions [ 45.529722] yenta_cardbus 0000:02:04.0: Using INTVAL to route CSC interrupts to PCI [ 45.529725] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI [ 45.529733] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01a11002, devctl 0x64 [ 45.604651] device-mapper: multipath: version 1.3.2 loaded [ 45.668251] [drm] radeon defaulting to kernel modesetting. [ 45.668256] [drm] radeon kernel modesetting enabled. [ 45.679372] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 45.736751] [drm] initializing kernel modesetting (RS480 0x1002:0x5975 0x103C:0x30B0). [ 45.736778] [drm] register mmio base: 0xD4300000 [ 45.736780] [drm] register mmio size: 65536 [ 45.736960] [drm] Generation 2 PCI interface, using max accessible memory [ 45.736967] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used) [ 45.736972] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [ 45.737286] [drm] Detected VRAM RAM=128M, BAR=128M [ 45.737291] [drm] RAM width 128bits DDR [ 45.742223] [TTM] Zone kernel: Available graphics memory: 439632 kiB. [ 45.742228] [TTM] Zone highmem: Available graphics memory: 965876 kiB. [ 45.742231] [TTM] Initializing pool allocator. [ 45.742264] [drm] radeon: 128M of VRAM memory ready [ 45.742266] [drm] radeon: 512M of GTT memory ready. [ 45.742297] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 45.760866] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cf8, PCI irq 20 [ 45.760873] yenta_cardbus 0000:02:04.0: Socket status: 30000006 [ 45.760879] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 45.760890] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x1000-0x1fff] [ 45.760895] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x1000-0x1fff: excluding 0x1000-0x10ff 0x1400-0x14ff [ 45.778030] [drm] radeon: 4 quad pipes, 1 z pipes initialized. [ 45.786739] [drm] PCIE GART of 512M enabled (table at 0x0000000029000000). [ 45.797531] radeon 0000:01:05.0: WB enabled [ 45.797538] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 45.797540] [drm] Driver supports precise vblank timestamp query. [ 45.797571] [drm] radeon: irq initialized. [ 45.798134] [drm] Loading R300 Microcode [ 45.825918] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000/0x0 [ 45.825929] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 [ 45.843987] [ 45.843996] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xd4000000-0xd42fffff] [ 45.844036] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4000000-0xd42fffff: excluding 0xd4000000-0xd402ffff [ 45.844053] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x84000000-0x87ffffff pref] [ 45.844057] pcmcia_socket pcmcia_socket0: cs: memory probe 0x84000000-0x87ffffff: excluding 0x84000000-0x87ffffff [ 45.857726] tifm_7xx1 0000:02:04.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 45.866719] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 [ 45.869015] tpm_tis 00:03: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us [ 45.919184] type=1400 audit(1420613948.383:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=867 comm="apparmor_parser" [ 45.919732] type=1400 audit(1420613948.383:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=867 comm="apparmor_parser" [ 45.920074] type=1400 audit(1420613948.387:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=867 comm="apparmor_parser" [ 45.941300] tpm_tis 00:03: Adjusting TPM timeout parameters. [ 46.135836] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 46.135842] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135846] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 46.135850] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135853] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 46.135856] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135859] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 46.135863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135866] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 46.135870] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135872] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 46.135876] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135879] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 46.135883] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135885] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 46.135889] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135892] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 46.135896] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135899] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 46.135902] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135905] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 46.135909] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135912] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 46.135915] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 46.135918] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 46.135922] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 46.135925] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 46.135928] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 46.135932] cfg80211: World regulatory domain updated: [ 46.135934] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 46.135938] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135941] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 46.135944] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 46.135947] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.135951] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 46.163039] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 46.174251] ppdev: user-space parallel port driver [ 46.185217] [drm] radeon: ring at 0x0000000080001000 [ 46.185239] [drm] ring test succeeded in 1 usecs [ 46.185388] [drm] radeon: ib pool ready. [ 46.185462] [drm] ib test succeeded in 0 usecs [ 46.185702] [drm] Panel ID String: LGP [ 46.185705] [drm] Panel Size 1400x1050 [ 46.198708] [drm] radeon legacy LVDS backlight initialized [ 46.199866] [drm] Radeon Display Connectors [ 46.199870] [drm] Connector 0: [ 46.199872] [drm] VGA [ 46.199875] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [ 46.199877] [drm] Encoders: [ 46.199879] [drm] CRT1: INTERNAL_DAC2 [ 46.199881] [drm] Connector 1: [ 46.199883] [drm] LVDS [ 46.199885] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [ 46.199888] [drm] Encoders: [ 46.199889] [drm] LCD1: INTERNAL_LVDS [ 46.199891] [drm] Connector 2: [ 46.199893] [drm] S-video [ 46.199894] [drm] Encoders: [ 46.199896] [drm] TV1: INTERNAL_DAC2 [ 46.199920] [drm] radeon: power management initialized [ 46.256270] input: HP WMI hotkeys as /devices/virtual/input/input6 [ 46.309417] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 [ 46.311782] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7 [ 46.313238] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 46.314045] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf [ 46.314782] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff [ 46.314810] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 46.314838] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 46.314866] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 46.465597] [drm] fb mappable at 0xC0040000 [ 46.465603] [drm] vram apper at 0xC0000000 [ 46.465605] [drm] size 5914624 [ 46.465607] [drm] fb depth is 24 [ 46.465609] [drm] pitch is 5632 [ 46.465865] fbcon: radeondrmfb (fb0) is primary device [ 46.467209] Console: switching to colour frame buffer device 175x65 [ 46.467265] fb0: radeondrmfb frame buffer device [ 46.467267] drm: registered panic notifier [ 46.467277] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0 [ 46.544634] Adding 6143996k swap on /mnt/6000MiB.swap. Priority:60 extents:19 across:7872508k [ 46.655004] init: failsafe main process (1056) killed by TERM signal [ 46.718847] Bluetooth: Core ver 2.16 [ 46.719210] NET: Registered protocol family 31 [ 46.719213] Bluetooth: HCI device and connection manager initialized [ 46.719218] Bluetooth: HCI socket layer initialized [ 46.719221] Bluetooth: L2CAP socket layer initialized [ 46.719620] Bluetooth: SCO socket layer initialized [ 46.740484] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 46.740490] Bluetooth: BNEP filters: protocol multicast [ 46.756143] parport_pc 00:02: [io 0x0378-0x037f] [ 46.756154] parport_pc 00:02: [io 0x0778-0x077a] [ 46.756249] parport_pc 00:02: [irq 5] [ 46.756254] parport_pc 00:02: [dma 1] [ 46.925338] Bluetooth: RFCOMM TTY layer initialized [ 46.925349] Bluetooth: RFCOMM socket layer initialized [ 46.925351] Bluetooth: RFCOMM ver 1.11 [ 47.014167] type=1400 audit(1420613949.479:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1143 comm="apparmor_parser" [ 47.014602] type=1400 audit(1420613949.479:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1143 comm="apparmor_parser" [ 47.015140] type=1400 audit(1420613949.479:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1144 comm="apparmor_parser" [ 47.016144] type=1400 audit(1420613949.483:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1144 comm="apparmor_parser" [ 47.016457] type=1400 audit(1420613949.483:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1144 comm="apparmor_parser" [ 47.022584] type=1400 audit(1420613949.487:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1147 comm="apparmor_parser" [ 47.023225] type=1400 audit(1420613949.487:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1147 comm="apparmor_parser" [ 47.332091] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01) [ 47.351407] parport_pc 00:02: activated [ 47.351414] parport_pc 00:02: reported by Plug and Play ACPI [ 47.351503] parport0: PC-style at 0x378 (0x778), irq 5, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 47.417750] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 47.418923] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 47.749571] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 47.750259] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 47.761220] lp0: using parport0 (interrupt-driven). [ 48.249286] init: gdm main process (1313) killed by TERM signal [ 48.273171] kvm: Nested Virtualization enabled [ 48.896378] vboxdrv: Found 2 processor cores. [ 48.904096] vboxdrv: fAsync=1 offMin=0x23248 offMax=0x23248 [ 48.904207] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 48.904210] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000). [ 48.988712] vboxpci: IOMMU not found (not registered) [ 49.136921] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 50.037719] init: plymouth-stop pre-start process (1905) terminated with status 1 [ 51.092109] wlan0: authenticate with f8:1a:67:15:47:18 (try 1) [ 51.094711] wlan0: authenticated [ 51.116102] wlan0: associate with f8:1a:67:15:47:18 (try 1) [ 51.118748] wlan0: RX AssocResp from f8:1a:67:15:47:18 (capab=0x431 status=0 aid=1) [ 51.118752] wlan0: associated [ 51.118756] wlan0: No basic rates in AssocResp. Using min supported rate instead. [ 51.119620] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 51.119693] cfg80211: Calling CRDA for country: SI [ 51.125729] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 51.125735] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125739] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 51.125743] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125746] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 51.125749] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125752] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 51.125756] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125758] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 51.125762] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125765] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 51.125769] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125771] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 51.125775] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125778] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 51.125782] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125785] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 51.125788] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125791] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 51.125795] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125798] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 51.125801] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125804] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 51.125808] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125810] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 51.125814] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 51.125817] cfg80211: Disabling freq 2484 MHz [ 51.125820] cfg80211: Regulatory domain changed to country: SI [ 51.125823] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.125826] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 51.125829] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 51.125832] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 51.125835] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 51.178491] init: mysql main process (1376) terminated with status 2 [ 51.178532] init: mysql main process ended, respawning [ 51.417637] init: mysql post-start process (1378) terminated with status 1 [ 51.428550] audit_printk_skb: 51 callbacks suppressed [ 51.428556] type=1400 audit(1420613953.895:29): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=2008 comm="apparmor_parser" [ 53.389028] init: mysql main process (2020) terminated with status 2 [ 53.389073] init: mysql main process ended, respawning [ 53.487547] init: mysql post-start process (2021) terminated with status 1 [ 53.509894] type=1400 audit(1420613955.975:30): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=2381 comm="apparmor_parser" [ 55.893699] init: mysql main process (2394) terminated with status 2 [ 55.893761] init: mysql respawning too fast, stopped [ 61.312043] wlan0: no IPv6 routers present [ 70.333972] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [36894.902326] non-matching-uid symlink following attempted in sticky world-writable directory by BrowserBlocking (fsuid 1000 != 117) [59396.382598] non-matching-uid symlink following attempted in sticky world-writable directory by BrowserBlocking (fsuid 1000 != 117) [103498.050772] non-matching-uid symlink following attempted in sticky world-writable directory by BrowserBlocking (fsuid 1000 != 117) [147599.511496] non-matching-uid symlink following attempted in sticky world-writable directory by BrowserBlocking (fsuid 1000 != 117) [150847.466514] type=1400 audit(1420764766.044:31): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=32458 comm="apparmor_parser" [150848.002537] type=1400 audit(1420764766.580:32): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=32492 comm="apparmor_parser" [150852.089107] init: mysql main process (32505) terminated with status 2 [150852.089158] init: mysql main process ended, respawning [150852.639868] init: mysql post-start process (32506) terminated with status 1 [150852.653032] type=1400 audit(1420764771.231:33): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=32544 comm="apparmor_parser" [150855.285488] init: mysql main process (32556) terminated with status 2 [150855.285532] init: mysql main process ended, respawning [150855.736940] init: mysql post-start process (32557) terminated with status 1 [150855.749945] type=1400 audit(1420764774.327:34): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=32611 comm="apparmor_parser" [150857.590748] init: mysql main process (32623) terminated with status 2 [150857.590797] init: mysql main process ended, respawning [150857.813213] init: mysql post-start process (32624) terminated with status 1 [150857.827732] type=1400 audit(1420764776.403:35): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=32670 comm="apparmor_parser" [150859.658760] init: mysql main process (32682) terminated with status 2 [150859.658808] init: mysql main process ended, respawning [150859.895822] init: mysql post-start process (32683) terminated with status 1 [150859.914565] type=1400 audit(1420764778.491:36): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=32729 comm="apparmor_parser" [150861.764314] init: mysql main process (32741) terminated with status 2 [150861.764365] init: mysql respawning too fast, stopped