[30714.503419] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[30714.520572] ata5.00: configured for UDMA/133
[30714.567350] PM: resume of drv:scsi dev:host4 complete after 383.365 msecs
[30714.567371] PM: resume of drv:scsi_host dev:host4 complete after 383.377 msecs
[30714.567374] PM: resume of drv:scsi dev:target4:0:0 complete after 383.132 msecs
[30714.567391] PM: resume of drv:sr dev:4:0:0:0 complete after 383.135 msecs
[30714.567410] PM: resume of drv:scsi_device dev:4:0:0:0 complete after 383.142 msecs
[30716.469078] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[30716.643688] ata1.00: configured for UDMA/133
[30716.656892] PM: resume of drv:scsi dev:host0 complete after 2475.501 msecs
[30716.656897] PM: resume of drv:ata_port dev:ata1 complete after 2399.693 msecs
[30716.656906] PM: resume of drv:scsi dev:target0:0:0 complete after 2475.263 msecs
[30716.656908] PM: resume of drv:scsi_host dev:host0 complete after 2475.505 msecs
[30716.656913] PM: resume of drv:sd dev:0:0:0:0 complete after 2475.257 msecs
[30716.656919] sd 0:0:0:0: [sda] Starting disk
[30716.670078] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2488.419 msecs
[30716.670537] PM: resume of devices complete after 2492.050 msecs
[30716.670608] PM: resume devices took 2.492 seconds
[30716.670756] PM: Finishing wakeup.
[30716.670758] Restarting tasks ... done.
[30716.683599] video LNXVIDEO:00: Restoring backlight state
[30716.683604] video LNXVIDEO:01: Restoring backlight state
[30716.800821] usb 3-2: USB disconnect, device number 2
[30717.449796] init: anacron main process (17529) killed by TERM signal
[30717.788622] r8169 0000:03:00.2: eth0: link down
[30717.789154] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[30717.856061] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[30725.703231] wlan0: authenticate with 00:0c:f6:69:3b:fd
[30725.708946] wlan0: send auth to 00:0c:f6:69:3b:fd (try 1/3)
[30725.710928] wlan0: authenticated
[30725.717960] wlan0: associate with 00:0c:f6:69:3b:fd (try 1/3)
[30725.722531] wlan0: RX AssocResp from 00:0c:f6:69:3b:fd (capab=0x411 status=0 aid=1)
[30725.722624] wlan0: associated
[30725.723075] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[30725.723297] cfg80211: Calling CRDA for country: US
[30725.737371] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[30725.737381] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[30725.737387] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[30725.737391] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[30725.737395] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[30725.737400] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[30725.737404] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[30725.737408] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[30725.737412] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[30725.737416] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[30725.737420] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[30725.737424] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[30725.737428] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[30725.737432] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[30725.737436] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[30725.737440] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[30725.737444] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[30725.737448] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[30725.737451] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[30725.737456] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[30725.737459] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[30725.737463] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[30725.737467] cfg80211: Disabling freq 2467 MHz
[30725.737470] cfg80211: Disabling freq 2472 MHz
[30725.737474] cfg80211: Disabling freq 2484 MHz
[30725.737478] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[30725.737482] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[30725.737486] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[30725.737490] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[30725.737494] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[30725.737498] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[30725.737502] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[30725.737506] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[30725.737510] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[30725.737514] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737518] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[30725.737522] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737526] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[30725.737530] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737534] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[30725.737538] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737542] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[30725.737546] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737550] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[30725.737554] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737558] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[30725.737562] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737566] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[30725.737571] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737575] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[30725.737579] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737582] cfg80211: Disabling freq 5600 MHz
[30725.737585] cfg80211: Disabling freq 5620 MHz
[30725.737589] cfg80211: Disabling freq 5640 MHz
[30725.737593] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[30725.737597] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737601] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[30725.737605] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737609] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[30725.737613] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737617] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[30725.737621] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[30725.737625] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[30725.737629] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[30725.737633] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[30725.737637] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[30725.737641] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[30725.737645] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[30725.737649] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[30725.737653] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[30725.737669] ath: regdomain 0x8348 updated by CountryIE
[30725.737672] ath: EEPROM regdomain: 0x8348
[30725.737675] ath: EEPROM indicates we should expect a country code
[30725.737679] ath: doing EEPROM country->regdmn map search
[30725.737683] ath: country maps to regdmn code: 0x3a
[30725.737688] ath: Country alpha2 being used: US
[30725.737692] ath: Regpair used: 0x3a
[30725.737743] cfg80211: Regulatory domain changed to country: US
[30725.737748] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[30725.737755] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[30725.737761] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[30725.737766] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737772] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737778] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[30725.737784] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[30746.378566] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[30766.101629] usb 3-2: new low-speed USB device number 4 using xhci_hcd
[30766.124128] usb 3-2: New USB device found, idVendor=046d, idProduct=c045
[30766.124138] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[30766.124145] usb 3-2: Product: USB-PS/2 Optical Mouse
[30766.124150] usb 3-2: Manufacturer: Logitech
[30766.124628] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[30766.129723] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input15
[30766.130426] hid-generic 0003:046D:C045.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-2/input0
[32439.411728] type=1400 audit(1375861009.803:32): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=20819 comm="apparmor_parser"
[32439.413386] type=1400 audit(1375861009.803:33): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=20819 comm="apparmor_parser"
[35447.372020] CPU1: Package power limit notification (total events = 5494)
[35447.372024] CPU2: Package power limit notification (total events = 5500)
[35447.372027] CPU0: Package power limit notification (total events = 5493)
[35447.372029] CPU3: Package power limit notification (total events = 5493)
[35447.385067] CPU1: Package power limit normal
[35447.385070] CPU0: Package power limit normal
[35447.385094] CPU2: Package power limit normal
[35447.385096] CPU3: Package power limit normal
[41638.866934] CPU2: Package power limit notification (total events = 5507)
[41638.866939] CPU0: Package power limit notification (total events = 5500)
[41638.866941] CPU1: Package power limit notification (total events = 5501)
[41638.866943] CPU3: Package power limit notification (total events = 5500)
[41638.879962] CPU1: Package power limit normal
[41638.879968] CPU2: Package power limit normal
[41638.879971] CPU3: Package power limit normal
[41638.879973] CPU0: Package power limit normal
[42245.406787] CPU1: Package power limit notification (total events = 5503)
[42245.406791] CPU3: Package power limit notification (total events = 5502)
[42245.406793] CPU2: Package power limit notification (total events = 5509)
[42245.406795] CPU0: Package power limit notification (total events = 5502)
[42245.421806] CPU2: Package power limit normal
[42245.421808] CPU3: Package power limit normal
[42245.421811] CPU1: Package power limit normal
[42245.421813] CPU0: Package power limit normal
[42561.586090] CPU1: Package power limit notification (total events = 5507)
[42561.586095] CPU2: Package power limit notification (total events = 5513)
[42561.586097] CPU3: Package power limit notification (total events = 5506)
[42561.586099] CPU0: Package power limit notification (total events = 5506)
[42561.599084] CPU1: Package power limit normal
[42561.599090] CPU3: Package power limit normal
[42561.599092] CPU2: Package power limit normal
[42561.599094] CPU0: Package power limit normal
[43941.636935] CPU1: Package power limit notification (total events = 5509)
[43941.636939] CPU3: Package power limit notification (total events = 5508)
[43941.636941] CPU2: Package power limit notification (total events = 5515)
[43941.636944] CPU0: Package power limit notification (total events = 5508)
[43941.655979] CPU1: Package power limit normal
[43941.655986] CPU2: Package power limit normal
[43941.655989] CPU3: Package power limit normal
[43941.655993] CPU0: Package power limit normal
[44317.932737] CPU1: Package power limit notification (total events = 5512)
[44317.932742] CPU3: Package power limit notification (total events = 5511)
[44317.932744] CPU2: Package power limit notification (total events = 5518)
[44317.932746] CPU0: Package power limit notification (total events = 5511)
[44317.950008] CPU1: Package power limit normal
[44317.950014] CPU2: Package power limit normal
[44317.950017] CPU3: Package power limit normal
[44317.950021] CPU0: Package power limit normal
[44671.639284] CPU2: Package power limit notification (total events = 5519)
[44671.639286] CPU3: Package power limit notification (total events = 5512)
[44671.639290] CPU1: Package power limit notification (total events = 5513)
[44671.639292] CPU0: Package power limit notification (total events = 5512)
[44671.652291] CPU0: Package power limit normal
[44671.652293] CPU1: Package power limit normal
[44671.652297] CPU2: Package power limit normal
[44671.652299] CPU3: Package power limit normal
[45612.284351] wlan0: deauthenticating from 00:0c:f6:69:3b:fd by local choice (reason=3)
[45612.318405] cfg80211: All devices are disconnected, going to restore regulatory settings
[45612.318411] cfg80211: Restoring regulatory settings
[45612.318416] cfg80211: Calling CRDA to update world regulatory domain
[45612.772165] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[45612.775402] cfg80211: World regulatory domain updated:
[45612.775408] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[45612.775414] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45612.775419] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[45612.775423] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[45612.775427] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45612.775431] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45615.707550] PM: Syncing filesystems ... done.
[45615.894562] PM: Preparing system for mem sleep
[45615.958770] Freezing user space processes ... (elapsed 0.01 seconds) done.
[45615.974710] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[45615.990770] PM: Entering mem sleep
[45615.990826] Suspending console(s) (use no_console_suspend to debug)
[45615.991236] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[45615.991385] sd 0:0:0:0: [sda] Stopping disk
[45616.003693] [drm] nouveau 0000:01:00.0: Disabling display...
[45616.054235] [drm] nouveau 0000:01:00.0: Disabling fbcon...
[45616.054238] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
[45616.054279] [drm] nouveau 0000:01:00.0: Evicting buffers...
[45616.055465] [drm] nouveau 0000:01:00.0: Idling channels...
[45616.055711] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
[45616.382054] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 378.635 msecs
[45616.554499] PM: suspend of drv:sd dev:0:0:0:0 complete after 563.946 msecs
[45616.554515] PM: suspend of drv:scsi dev:target0:0:0 complete after 563.904 msecs
[45616.554531] PM: suspend of drv:scsi dev:host0 complete after 563.710 msecs
[45616.554627] PM: suspend of drv: dev:ata1 complete after 563.644 msecs
[45616.569832] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 566.771 msecs
[45616.603738] [drm] nouveau 0000:01:00.0: And we're gone!
[45616.617876] nouveau 0000:01:00.0: power state changed by ACPI to D3
[45616.617887] PM: suspend of drv:nouveau dev:0000:01:00.0 complete after 614.933 msecs
[45616.617934] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 612.154 msecs
[45616.617982] PM: suspend of drv: dev:pci0000:00 complete after 612.155 msecs
[45616.618001] PM: suspend of devices complete after 627.790 msecs
[45616.618004] PM: suspend devices took 0.628 seconds
[45616.618197] PM: late suspend of devices complete after 0.190 msecs
[45616.634026] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
[45616.650001] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[45616.666109] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[45616.697818] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
[45616.713818] PM: noirq suspend of devices complete after 95.728 msecs
[45616.714172] ACPI: Preparing to enter system sleep state S3
[45616.837664] PM: Saving platform NVS memory
[45616.839230] Disabling non-boot CPUs ...
[45616.941443] CPU 1 is now offline
[45617.045310] CPU 2 is now offline
[45617.149187] CPU 3 is now offline
[45617.149634] Extended CMOS year: 2000
[45617.151145] ACPI: Low-level resume complete
[45617.151188] PM: Restoring platform NVS memory
[45617.151586] Extended CMOS year: 2000
[45617.151629] Enabling non-boot CPUs ...
[45617.151735] Booting Node 0 Processor 1 APIC 0x1
[45617.162137] Initializing CPU#1
[45617.166685] CPU1 is up
[45617.166798] Booting Node 0 Processor 2 APIC 0x2
[45617.177129] Initializing CPU#2
[45617.181609] CPU2 is up
[45617.181716] Booting Node 0 Processor 3 APIC 0x3
[45617.192101] Initializing CPU#3
[45617.196723] CPU3 is up
[45617.201775] ACPI: Waking up from system sleep state S3
[45617.395258] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
[45617.395426] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[45617.395880] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[45617.396766] PM: noirq resume of devices complete after 1.723 msecs
[45617.396948] PM: early resume of devices complete after 0.124 msecs
[45617.397029] i915 0000:00:02.0: setting latency timer to 64
[45617.397041] xhci_hcd 0000:00:14.0: setting latency timer to 64
[45617.397109] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[45617.397135] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[45617.397248] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[45617.397254] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[45617.397319] ahci 0000:00:1f.2: setting latency timer to 64
[45617.397334] [drm] nouveau 0000:01:00.0: We're back, enabling device...
[45617.397440] pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
[45617.397939] nouveau 0000:01:00.0: power state changed by ACPI to D0
[45617.397945] nouveau 0000:01:00.0: power state changed by ACPI to D0
[45617.397952] nouveau 0000:01:00.0: power state changed by ACPI to D0
[45617.397956] nouveau 0000:01:00.0: power state changed by ACPI to D0
[45617.397966] [drm] nouveau 0000:01:00.0: POSTing device...
[45617.397969] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x795C
[45617.398369] dpm_run_callback(): pnp_bus_resume+0x0/0x70 returns -19
[45617.398371] PM: Device 00:08 failed to resume: error -19
[45617.449575] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[45617.452102] mei 0000:00:16.0: wd: failed to find the client
[45617.458147] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7FB8
[45617.484973] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x924D
[45617.484977] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x9251
[45617.485033] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x9358
[45617.485034] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x93BD
[45617.504860] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[45617.514651] PM: resume of drv:hub dev:3-0:1.0 complete after 117.367 msecs
[45617.514654] PM: resume of drv: dev:ep_00 complete after 117.356 msecs
[45617.514659] PM: resume of drv:usb dev:3-4 complete after 114.801 msecs
[45617.514662] PM: resume of drv: dev:ep_81 complete after 117.368 msecs
[45617.514670] PM: resume of drv:usb dev:3-2 complete after 114.722 msecs
[45617.574593] PM: resume of drv:hub dev:1-1:1.0 complete after 175.043 msecs
[45617.574608] PM: resume of drv: dev:ep_00 complete after 175.022 msecs
[45617.574611] PM: resume of drv: dev:ep_81 complete after 175.039 msecs
[45617.580006] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[45617.580460] [drm] nouveau 0000:01:00.0: Restoring mode...
[45617.582062] [drm] nouveau 0000:01:00.0: no native mode, forcing panel scaling
[45617.587267] PM: resume of drv:usbhid dev:3-2:1.0 complete after 187.389 msecs
[45617.587278] PM: resume of drv: dev:ep_00 complete after 187.362 msecs
[45617.587280] PM: resume of drv: dev:ep_81 complete after 187.384 msecs
[45617.626849] usb 3-4: reset high-speed USB device number 3 using xhci_hcd
[45617.678090] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f7644a00
[45617.680355] PM: resume of drv:uvcvideo dev:3-4:1.1 complete after 280.636 msecs
[45617.680360] PM: resume of drv: dev:ep_00 complete after 280.621 msecs
[45617.680372] PM: resume of drv:uvcvideo dev:3-4:1.0 complete after 280.692 msecs
[45617.680395] PM: resume of drv: dev:ep_81 complete after 280.700 msecs
[45617.738457] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[45617.755471] ata5.00: configured for UDMA/133
[45617.786478] PM: resume of drv:scsi dev:host4 complete after 387.269 msecs
[45617.786510] PM: resume of drv:scsi dev:target4:0:0 complete after 387.030 msecs
[45617.786528] PM: resume of drv:scsi_host dev:host4 complete after 387.302 msecs
[45617.786532] PM: resume of drv:sr dev:4:0:0:0 complete after 387.031 msecs
[45617.786554] PM: resume of drv:scsi_device dev:4:0:0:0 complete after 387.040 msecs
[45619.768043] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[45619.939898] ata1.00: configured for UDMA/133
[45619.955823] PM: resume of drv:scsi dev:host0 complete after 2559.356 msecs
[45619.955828] PM: resume of drv:ata_port dev:ata1 complete after 2507.677 msecs
[45619.955849] PM: resume of drv:scsi_host dev:host0 complete after 2559.369 msecs
[45619.955856] PM: resume of drv:scsi dev:target0:0:0 complete after 2559.028 msecs
[45619.955867] PM: resume of drv:sd dev:0:0:0:0 complete after 2559.023 msecs
[45619.955873] sd 0:0:0:0: [sda] Starting disk
[45619.966361] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2569.505 msecs
[45619.966825] PM: resume of devices complete after 2572.949 msecs
[45619.966895] PM: resume devices took 2.572 seconds
[45619.967045] PM: Finishing wakeup.
[45619.967046] Restarting tasks ... done.
[45619.979823] video LNXVIDEO:00: Restoring backlight state
[45619.979827] video LNXVIDEO:01: Restoring backlight state
[45621.567034] r8169 0000:03:00.2: eth0: link down
[45621.567484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[45621.606778] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[45629.481596] wlan0: authenticate with 00:0c:f6:69:3b:fd
[45629.487237] wlan0: send auth to 00:0c:f6:69:3b:fd (try 1/3)
[45629.489266] wlan0: authenticated
[45629.496333] wlan0: associate with 00:0c:f6:69:3b:fd (try 1/3)
[45629.500394] wlan0: RX AssocResp from 00:0c:f6:69:3b:fd (capab=0x411 status=0 aid=1)
[45629.500513] wlan0: associated
[45629.500965] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[45629.501191] cfg80211: Calling CRDA for country: US
[45629.511451] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[45629.511463] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[45629.511470] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[45629.511476] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[45629.511481] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[45629.511487] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[45629.511492] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[45629.511498] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[45629.511503] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[45629.511508] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[45629.511513] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[45629.511519] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[45629.511525] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[45629.511530] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[45629.511535] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[45629.511541] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[45629.511546] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[45629.511552] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[45629.511557] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[45629.511563] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[45629.511568] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[45629.511574] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[45629.511579] cfg80211: Disabling freq 2467 MHz
[45629.511583] cfg80211: Disabling freq 2472 MHz
[45629.511587] cfg80211: Disabling freq 2484 MHz
[45629.511593] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[45629.511599] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[45629.511604] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[45629.511610] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[45629.511615] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[45629.511621] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[45629.511626] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[45629.511632] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[45629.511637] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[45629.511641] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511646] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[45629.511652] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511657] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[45629.511662] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511667] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[45629.511673] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511677] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[45629.511683] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511688] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[45629.511694] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511698] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[45629.511703] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511708] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[45629.511713] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511718] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[45629.511723] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511728] cfg80211: Disabling freq 5600 MHz
[45629.511733] cfg80211: Disabling freq 5620 MHz
[45629.511737] cfg80211: Disabling freq 5640 MHz
[45629.511742] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[45629.511748] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511753] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[45629.511759] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511765] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[45629.511770] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511776] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[45629.511781] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[45629.511786] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[45629.511792] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[45629.511797] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[45629.511802] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[45629.511807] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[45629.511813] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[45629.511818] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[45629.511824] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[45629.511841] ath: regdomain 0x8348 updated by CountryIE
[45629.511846] ath: EEPROM regdomain: 0x8348
[45629.511850] ath: EEPROM indicates we should expect a country code
[45629.511856] ath: doing EEPROM country->regdmn map search
[45629.511861] ath: country maps to regdmn code: 0x3a
[45629.511866] ath: Country alpha2 being used: US
[45629.511870] ath: Regpair used: 0x3a
[45629.511917] cfg80211: Regulatory domain changed to country: US
[45629.511921] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[45629.511928] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[45629.511934] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[45629.511940] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511946] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511952] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[45629.511958] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[46520.765178] CPU1: Package power limit notification (total events = 5514)
[46520.765182] CPU3: Package power limit notification (total events = 5513)
[46520.765185] CPU2: Package power limit notification (total events = 5520)
[46520.765187] CPU0: Package power limit notification (total events = 5513)
[46520.778051] CPU1: Package power limit normal
[46520.778056] CPU2: Package power limit normal
[46520.778059] CPU0: Package power limit normal
[46520.778489] CPU3: Package power limit normal
[48435.210339] CPU0: Package power limit notification (total events = 5515)
[48435.210341] CPU1: Package power limit notification (total events = 5516)
[48435.210364] CPU3: Package power limit notification (total events = 5515)
[48435.210367] CPU2: Package power limit notification (total events = 5522)
[48435.223371] CPU1: Package power limit normal
[48435.223376] CPU2: Package power limit normal
[48435.223378] CPU3: Package power limit normal
[48435.223380] CPU0: Package power limit normal
[48961.390949] CPU1: Package power limit notification (total events = 5517)
[48961.390953] CPU2: Package power limit notification (total events = 5523)
[48961.390956] CPU3: Package power limit notification (total events = 5516)
[48961.390958] CPU0: Package power limit notification (total events = 5516)
[48961.402021] CPU1: Package power limit normal
[48961.402023] CPU0: Package power limit normal
[48961.402027] CPU2: Package power limit normal
[48961.402029] CPU3: Package power limit normal
[49404.655186] CPU3: Package power limit notification (total events = 5517)
[49404.655190] CPU2: Package power limit notification (total events = 5524)
[49404.655194] CPU1: Package power limit notification (total events = 5518)
[49404.655196] CPU0: Package power limit notification (total events = 5517)
[49404.667667] CPU0: Package power limit normal
[49404.667671] CPU1: Package power limit normal
[49404.667675] CPU3: Package power limit normal
[49404.667678] CPU2: Package power limit normal
[49784.391345] wlan0: deauthenticated from 00:0c:f6:69:3b:fd (Reason: 6)
[49784.416669] cfg80211: All devices are disconnected, going to restore regulatory settings
[49784.416678] cfg80211: Restoring regulatory settings
[49784.416684] cfg80211: Calling CRDA to update world regulatory domain
[49784.422487] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[49784.426451] cfg80211: World regulatory domain updated:
[49784.426455] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[49784.426458] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49784.426461] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[49784.426463] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[49784.426466] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49784.426468] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.351321] wlan0: authenticate with 00:0c:f6:69:3b:fd
[49788.356260] wlan0: send auth to 00:0c:f6:69:3b:fd (try 1/3)
[49788.358215] wlan0: authenticated
[49788.365164] wlan0: associate with 00:0c:f6:69:3b:fd (try 1/3)
[49788.369532] wlan0: RX AssocResp from 00:0c:f6:69:3b:fd (capab=0x411 status=0 aid=4)
[49788.369671] wlan0: associated
[49788.370179] cfg80211: Calling CRDA for country: US
[49788.379694] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[49788.379703] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[49788.379709] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[49788.379714] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[49788.379718] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[49788.379722] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[49788.379726] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[49788.379731] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[49788.379735] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[49788.379740] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[49788.379744] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[49788.379749] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[49788.379753] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[49788.379757] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[49788.379761] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[49788.379765] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[49788.379770] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[49788.379774] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[49788.379778] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[49788.379782] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[49788.379786] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[49788.379791] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[49788.379795] cfg80211: Disabling freq 2467 MHz
[49788.379799] cfg80211: Disabling freq 2472 MHz
[49788.379802] cfg80211: Disabling freq 2484 MHz
[49788.379807] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[49788.379811] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[49788.379815] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[49788.379820] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[49788.379824] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[49788.379828] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[49788.379832] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[49788.379837] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[49788.379841] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[49788.379845] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.379849] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[49788.379853] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.379857] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[49788.379862] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.379866] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[49788.379871] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.379875] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[49788.379879] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.379883] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[49788.379887] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.379892] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[49788.379896] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.379900] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[49788.379904] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.379908] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[49788.379913] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.379916] cfg80211: Disabling freq 5600 MHz
[49788.379920] cfg80211: Disabling freq 5620 MHz
[49788.379923] cfg80211: Disabling freq 5640 MHz
[49788.379927] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[49788.379932] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.379936] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[49788.379940] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.379944] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[49788.379949] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.379953] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[49788.379957] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[49788.379961] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[49788.379966] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[49788.379970] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[49788.379974] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[49788.379978] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[49788.379983] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[49788.379987] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[49788.379991] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[49788.380006] ath: regdomain 0x8348 updated by CountryIE
[49788.380010] ath: EEPROM regdomain: 0x8348
[49788.380013] ath: EEPROM indicates we should expect a country code
[49788.380017] ath: doing EEPROM country->regdmn map search
[49788.380021] ath: country maps to regdmn code: 0x3a
[49788.380025] ath: Country alpha2 being used: US
[49788.380028] ath: Regpair used: 0x3a
[49788.380070] cfg80211: Regulatory domain changed to country: US
[49788.380073] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[49788.380077] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[49788.380082] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[49788.380086] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.380090] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.380094] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[49788.380098] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[50723.221846] CPU2: Package power limit notification (total events = 5525)
[50723.221851] CPU0: Package power limit notification (total events = 5518)
[50723.221854] CPU3: Package power limit notification (total events = 5518)
[50723.221856] CPU1: Package power limit notification (total events = 5519)
[50723.235555] CPU1: Package power limit normal
[50723.235559] CPU2: Package power limit normal
[50723.235562] CPU3: Package power limit normal
[50723.235564] CPU0: Package power limit normal
[51358.690022] usb 3-1: new high-speed USB device number 5 using xhci_hcd
[51358.710712] usb 3-1: New USB device found, idVendor=05ac, idProduct=12a8
[51358.710723] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[51358.710730] usb 3-1: Product: iPhone
[51358.710735] usb 3-1: Manufacturer: Apple Inc.
[51358.710740] usb 3-1: SerialNumber: df3c6af815fb0b3e69b45a4a3437ab7066cf9622
[51358.711280] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[51358.711296] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[51358.753262] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[51358.753276] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[51359.429260] ipheth 3-1:4.2: Apple iPhone USB Ethernet device attached
[51359.429388] usbcore: registered new interface driver ipheth
[51359.563671] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[51359.565677] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[52355.447071] CPU3: Package power limit notification (total events = 5520)
[52355.447076] CPU1: Package power limit notification (total events = 5521)
[52355.447079] CPU2: Package power limit notification (total events = 5527)
[52355.447082] CPU0: Package power limit notification (total events = 5520)
[52355.458021] CPU3: Package power limit normal
[52355.458024] CPU2: Package power limit normal
[52355.458027] CPU1: Package power limit normal
[52355.458029] CPU0: Package power limit normal
[53179.622429] CPU1: Package power limit notification (total events = 5522)
[53179.622432] CPU0: Package power limit notification (total events = 5521)
[53179.622455] CPU2: Package power limit notification (total events = 5528)
[53179.622458] CPU3: Package power limit notification (total events = 5521)
[53179.637447] CPU2: Package power limit normal
[53179.637452] CPU0: Package power limit normal
[53179.637455] CPU3: Package power limit normal
[53179.637458] CPU1: Package power limit normal
[56827.497525] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[56827.699479] usb 1-1.2: New USB device found, idVendor=0718, idProduct=0703
[56827.699485] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[56827.699488] usb 1-1.2: Product: TF090 Drive
[56827.699491] usb 1-1.2: Manufacturer: TDKMedia
[56827.699494] usb 1-1.2: SerialNumber: 10J0200000001933
[56827.700031] scsi7 : usb-storage 1-1.2:1.0
[56829.071993] scsi 7:0:0:0: Direct-Access     TDKMedia TF090 Drive      1100 PQ: 0 ANSI: 0 CCS
[56829.073817] sd 7:0:0:0: Attached scsi generic sg2 type 0
[56829.077530] sd 7:0:0:0: [sdb] 31494144 512-byte logical blocks: (16.1 GB/15.0 GiB)
[56829.078176] sd 7:0:0:0: [sdb] Write Protect is off
[56829.078181] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
[56829.081433] sd 7:0:0:0: [sdb] No Caching mode page present
[56829.081440] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[56829.084318] sd 7:0:0:0: [sdb] No Caching mode page present
[56829.084327] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[56829.099863]  sdb: sdb1
[56829.102270] sd 7:0:0:0: [sdb] No Caching mode page present
[56829.102277] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[56829.102282] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[56856.643119] CPU0: Package power limit notification (total events = 5522)
[56856.643123] CPU3: Package power limit notification (total events = 5522)
[56856.643126] CPU1: Package power limit notification (total events = 5523)
[56856.643129] CPU2: Package power limit notification (total events = 5529)
[56856.661113] CPU1: Package power limit normal
[56856.661116] CPU0: Package power limit normal
[56856.661119] CPU2: Package power limit normal
[56856.661121] CPU3: Package power limit normal
[56966.419834] usb 1-1.2: USB disconnect, device number 4
[57680.741289] wlan0: deauthenticating from 00:0c:f6:69:3b:fd by local choice (reason=3)
[57680.819637] cfg80211: All devices are disconnected, going to restore regulatory settings
[57680.819645] cfg80211: Restoring regulatory settings
[57680.819651] cfg80211: Calling CRDA to update world regulatory domain
[57681.012954] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[57681.016145] cfg80211: World regulatory domain updated:
[57681.016149] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[57681.016153] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57681.016157] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[57681.016160] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[57681.016163] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57681.016165] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57683.313180] PM: Syncing filesystems ... done.
[57683.616938] PM: Preparing system for mem sleep
[57683.704990] Freezing user space processes ... (elapsed 0.01 seconds) done.
[57683.720856] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[57683.736940] PM: Entering mem sleep
[57683.737010] Suspending console(s) (use no_console_suspend to debug)
[57683.737559] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[57683.737933] sd 0:0:0:0: [sda] Stopping disk
[57683.740744] ipheth 3-1:4.2: Apple iPhone USB Ethernet now disconnected
[57683.749990] [drm] nouveau 0000:01:00.0: Disabling display...
[57683.806470] [drm] nouveau 0000:01:00.0: Disabling fbcon...
[57683.806509] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
[57683.806560] [drm] nouveau 0000:01:00.0: Evicting buffers...
[57683.807522] [drm] nouveau 0000:01:00.0: Idling channels...
[57683.807768] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
[57684.128194] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 378.469 msecs
[57684.302388] PM: suspend of drv:sd dev:0:0:0:0 complete after 565.513 msecs
[57684.302432] PM: suspend of drv:scsi dev:target0:0:0 complete after 565.481 msecs
[57684.302450] PM: suspend of drv:scsi dev:host0 complete after 565.315 msecs
[57684.302536] PM: suspend of drv: dev:ata1 complete after 565.253 msecs
[57684.315956] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 566.603 msecs
[57684.355989] [drm] nouveau 0000:01:00.0: And we're gone!
[57684.372002] nouveau 0000:01:00.0: power state changed by ACPI to D3
[57684.372012] PM: suspend of drv:nouveau dev:0000:01:00.0 complete after 622.773 msecs
[57684.372036] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 619.960 msecs
[57684.372054] PM: suspend of drv: dev:pci0000:00 complete after 619.952 msecs
[57684.372061] PM: suspend of devices complete after 635.675 msecs
[57684.372063] PM: suspend devices took 0.636 seconds
[57684.372258] PM: late suspend of devices complete after 0.192 msecs
[57684.388157] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
[57684.404126] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[57684.420232] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[57684.451938] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
[57684.467942] PM: noirq suspend of devices complete after 95.791 msecs
[57684.468296] ACPI: Preparing to enter system sleep state S3
[57684.591786] PM: Saving platform NVS memory
[57684.593308] Disabling non-boot CPUs ...
[57684.695566] CPU 1 is now offline
[57684.799447] CPU 2 is now offline
[57684.903324] CPU 3 is now offline
[57684.903823] Extended CMOS year: 2000
[57684.905340] ACPI: Low-level resume complete
[57684.905382] PM: Restoring platform NVS memory
[57684.905786] Extended CMOS year: 2000
[57684.905831] Enabling non-boot CPUs ...
[57684.905939] Booting Node 0 Processor 1 APIC 0x1
[57684.916342] Initializing CPU#1
[57684.920900] CPU1 is up
[57684.921013] Booting Node 0 Processor 2 APIC 0x2
[57684.931345] Initializing CPU#2
[57684.935801] CPU2 is up
[57684.935879] Booting Node 0 Processor 3 APIC 0x3
[57684.946210] Initializing CPU#3
[57684.950665] CPU3 is up
[57684.955737] ACPI: Waking up from system sleep state S3
[57685.149376] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
[57685.149545] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[57685.150003] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[57685.150894] PM: noirq resume of devices complete after 1.736 msecs
[57685.151081] PM: early resume of devices complete after 0.129 msecs
[57685.151131] i915 0000:00:02.0: setting latency timer to 64
[57685.151165] xhci_hcd 0000:00:14.0: setting latency timer to 64
[57685.151280] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[57685.151382] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[57685.151414] [drm] nouveau 0000:01:00.0: We're back, enabling device...
[57685.151464] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[57685.151476] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[57685.151549] ahci 0000:00:1f.2: setting latency timer to 64
[57685.151568] pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
[57685.156312] mei 0000:00:16.0: wd: failed to find the client
[57685.156976] nouveau 0000:01:00.0: power state changed by ACPI to D0
[57685.156981] nouveau 0000:01:00.0: power state changed by ACPI to D0
[57685.156987] nouveau 0000:01:00.0: power state changed by ACPI to D0
[57685.156991] nouveau 0000:01:00.0: power state changed by ACPI to D0
[57685.157000] [drm] nouveau 0000:01:00.0: POSTing device...
[57685.157003] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x795C
[57685.161375] dpm_run_callback(): pnp_bus_resume+0x0/0x70 returns -19
[57685.161377] PM: Device 00:08 failed to resume: error -19
[57685.204499] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[57685.217170] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7FB8
[57685.244019] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x924D
[57685.244025] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x9251
[57685.244081] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x9358
[57685.244082] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x93BD
[57685.263909] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[57685.268789] PM: resume of drv:hub dev:3-0:1.0 complete after 117.417 msecs
[57685.268793] PM: resume of drv:usb dev:3-2 complete after 115.581 msecs
[57685.268796] PM: resume of drv: dev:ep_00 complete after 117.401 msecs
[57685.268808] PM: resume of drv: dev:ep_81 complete after 117.414 msecs
[57685.268811] PM: resume of drv:usb dev:3-4 complete after 115.762 msecs
[57685.268820] PM: resume of drv:usb dev:3-1 complete after 115.496 msecs
[57685.268839] PM: resume of drv: dev:ep_00 complete after 115.498 msecs
[57685.268842] PM: resume of drv:usb dev:3-1:4.0 complete after 115.458 msecs
[57685.268847] PM: resume of drv:usb dev:3-1:4.2 complete after 115.273 msecs
[57685.268856] PM: resume of drv: dev:ep_81 complete after 115.415 msecs
[57685.268858] PM: resume of drv: dev:ep_02 complete after 115.456 msecs
[57685.268860] PM: resume of drv: dev:ep_86 complete after 115.241 msecs
[57685.268862] PM: resume of drv: dev:ep_83 complete after 115.403 msecs
[57685.268868] PM: resume of drv:usbfs dev:3-1:4.1 complete after 115.370 msecs
[57685.268870] PM: resume of drv: dev:ep_05 complete after 115.236 msecs
[57685.268877] PM: resume of drv: dev:ep_04 complete after 115.362 msecs
[57685.268880] PM: resume of drv: dev:ep_85 complete after 115.323 msecs
[57685.328738] PM: resume of drv:hub dev:1-1:1.0 complete after 176.120 msecs
[57685.328752] PM: resume of drv: dev:ep_81 complete after 176.117 msecs
[57685.328755] PM: resume of drv: dev:ep_00 complete after 176.073 msecs
[57685.341333] PM: resume of drv:usbhid dev:3-2:1.0 complete after 188.193 msecs
[57685.341345] PM: resume of drv: dev:ep_00 complete after 188.133 msecs
[57685.341352] PM: resume of drv: dev:ep_81 complete after 188.173 msecs
[57685.352461] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[57685.352919] [drm] nouveau 0000:01:00.0: Restoring mode...
[57685.354555] [drm] nouveau 0000:01:00.0: no native mode, forcing panel scaling
[57685.380980] usb 3-4: reset high-speed USB device number 3 using xhci_hcd
[57685.432221] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f7644a00
[57685.434489] PM: resume of drv:uvcvideo dev:3-4:1.1 complete after 281.534 msecs
[57685.434509] PM: resume of drv: dev:ep_00 complete after 281.538 msecs
[57685.434513] PM: resume of drv:uvcvideo dev:3-4:1.0 complete after 281.613 msecs
[57685.434561] PM: resume of drv: dev:ep_81 complete after 281.650 msecs
[57685.484603] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[57685.501723] ata5.00: configured for UDMA/133
[57685.532640] PM: resume of drv:scsi dev:host4 complete after 380.426 msecs
[57685.532673] PM: resume of drv:scsi dev:target4:0:0 complete after 380.013 msecs
[57685.532696] PM: resume of drv:scsi_host dev:host4 complete after 380.441 msecs
[57685.532699] PM: resume of drv:sr dev:4:0:0:0 complete after 380.017 msecs
[57685.532784] PM: resume of drv:scsi_device dev:4:0:0:0 complete after 380.051 msecs
[57687.346388] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[57687.528119] ata1.00: configured for UDMA/133
[57687.542201] PM: resume of drv:scsi dev:host0 complete after 2392.665 msecs
[57687.542205] PM: resume of drv:ata_port dev:ata1 complete after 2327.692 msecs
[57687.542227] PM: resume of drv:scsi_host dev:host0 complete after 2392.648 msecs
[57687.542252] PM: resume of drv:scsi dev:target0:0:0 complete after 2392.101 msecs
[57687.542260] PM: resume of drv:sd dev:0:0:0:0 complete after 2392.067 msecs
[57687.542266] sd 0:0:0:0: [sda] Starting disk
[57687.554535] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2404.333 msecs
[57687.555012] PM: resume of devices complete after 2406.805 msecs
[57687.555084] PM: resume devices took 2.408 seconds
[57687.555237] PM: Finishing wakeup.
[57687.555239] Restarting tasks ... done.
[57687.561372] video LNXVIDEO:00: Restoring backlight state
[57687.561376] video LNXVIDEO:01: Restoring backlight state
[57687.689960] usb 3-1: USB disconnect, device number 5
[57688.741799] r8169 0000:03:00.2: eth0: link down
[57688.741978] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[57688.792212] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[57696.540124] wlan0: authenticate with 00:0c:f6:69:3b:fd
[57696.545724] wlan0: send auth to 00:0c:f6:69:3b:fd (try 1/3)
[57696.547708] wlan0: authenticated
[57696.551382] wlan0: associate with 00:0c:f6:69:3b:fd (try 1/3)
[57696.555408] wlan0: RX AssocResp from 00:0c:f6:69:3b:fd (capab=0x411 status=0 aid=1)
[57696.555486] wlan0: associated
[57696.555641] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[57696.555738] cfg80211: Calling CRDA for country: US
[57696.559084] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[57696.559088] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[57696.559090] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[57696.559091] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[57696.559093] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[57696.559094] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[57696.559096] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[57696.559097] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[57696.559098] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[57696.559100] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[57696.559101] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[57696.559103] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[57696.559104] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[57696.559106] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[57696.559107] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[57696.559109] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[57696.559110] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[57696.559111] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[57696.559113] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[57696.559114] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[57696.559116] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[57696.559117] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[57696.559118] cfg80211: Disabling freq 2467 MHz
[57696.559120] cfg80211: Disabling freq 2472 MHz
[57696.559121] cfg80211: Disabling freq 2484 MHz
[57696.559122] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[57696.559124] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[57696.559125] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[57696.559127] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[57696.559128] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[57696.559130] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[57696.559131] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[57696.559132] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[57696.559134] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[57696.559135] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559137] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[57696.559138] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559139] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[57696.559141] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559142] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[57696.559144] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559145] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[57696.559147] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559148] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[57696.559149] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559151] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[57696.559152] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559154] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[57696.559155] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559156] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[57696.559158] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559159] cfg80211: Disabling freq 5600 MHz
[57696.559160] cfg80211: Disabling freq 5620 MHz
[57696.559161] cfg80211: Disabling freq 5640 MHz
[57696.559163] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[57696.559164] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559166] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[57696.559167] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559169] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[57696.559170] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559171] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[57696.559173] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[57696.559174] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[57696.559176] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[57696.559177] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[57696.559178] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[57696.559180] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[57696.559181] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[57696.559183] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[57696.559184] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[57696.559190] ath: regdomain 0x8348 updated by CountryIE
[57696.559191] ath: EEPROM regdomain: 0x8348
[57696.559192] ath: EEPROM indicates we should expect a country code
[57696.559193] ath: doing EEPROM country->regdmn map search
[57696.559195] ath: country maps to regdmn code: 0x3a
[57696.559196] ath: Country alpha2 being used: US
[57696.559197] ath: Regpair used: 0x3a
[57696.559225] cfg80211: Regulatory domain changed to country: US
[57696.559226] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[57696.559228] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[57696.559229] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[57696.559230] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559232] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559233] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57696.559234] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[57700.768410] CPU1: Package power limit notification (total events = 5536)
[57700.768414] CPU3: Package power limit notification (total events = 5535)
[57700.768416] CPU2: Package power limit notification (total events = 5542)
[57700.768417] CPU0: Package power limit notification (total events = 5535)
[57700.779411] CPU1: Package power limit normal
[57700.779413] CPU2: Package power limit normal
[57700.779415] CPU3: Package power limit normal
[57700.779416] CPU0: Package power limit normal
[58067.304739] CPU1: Package power limit notification (total events = 5597)
[58067.304743] CPU2: Package power limit notification (total events = 5603)
[58067.304745] CPU3: Package power limit notification (total events = 5596)
[58067.304747] CPU0: Package power limit notification (total events = 5597)
[58067.305103] CPU3: Package power limit normal
[58067.305105] CPU1: Package power limit normal
[58067.305106] CPU2: Package power limit normal
[58067.305107] CPU0: Package power limit normal
[58368.993453] CPU0: Package power limit notification (total events = 5643)
[58368.993456] CPU2: Package power limit notification (total events = 5649)
[58368.993458] CPU1: Package power limit notification (total events = 5643)
[58368.993461] CPU3: Package power limit notification (total events = 5642)
[58368.993615] CPU0: Package power limit normal
[58368.993617] CPU2: Package power limit normal
[58368.993618] CPU1: Package power limit normal
[58368.993619] CPU3: Package power limit normal
[58674.120891] CPU3: Package power limit notification (total events = 5796)
[58674.120895] CPU1: Package power limit notification (total events = 5802)
[58674.120897] CPU2: Package power limit notification (total events = 5806)
[58674.120898] CPU0: Package power limit notification (total events = 5803)
[58674.121056] CPU1: Package power limit normal
[58674.121057] CPU3: Package power limit normal
[58674.121058] CPU2: Package power limit normal
[58674.121059] CPU0: Package power limit normal
[59010.172481] CPU0: Package power limit notification (total events = 5964)
[59010.172485] CPU2: Package power limit notification (total events = 5969)
[59010.172486] CPU3: Package power limit notification (total events = 5957)
[59010.172488] CPU1: Package power limit notification (total events = 5961)
[59010.172650] CPU0: Package power limit normal
[59010.172651] CPU2: Package power limit normal
[59010.172652] CPU1: Package power limit normal
[59010.172653] CPU3: Package power limit normal
[59310.890780] CPU1: Package power limit notification (total events = 6095)
[59310.890782] CPU2: Package power limit notification (total events = 6102)
[59310.890784] CPU3: Package power limit notification (total events = 6090)
[59310.890786] CPU0: Package power limit notification (total events = 6097)
[59310.890840] CPU2: Package power limit normal
[59310.890841] CPU1: Package power limit normal
[59310.890842] CPU3: Package power limit normal
[59310.890843] CPU0: Package power limit normal
[59321.966492] type=1400 audit(1375947398.895:34): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=3162 comm="apparmor_parser"
[59321.967302] type=1400 audit(1375947398.895:35): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=3162 comm="apparmor_parser"
[59616.070669] CPU2: Package power limit notification (total events = 6600)
[59616.070672] CPU1: Package power limit notification (total events = 6596)
[59616.070673] CPU3: Package power limit notification (total events = 6588)
[59616.070675] CPU0: Package power limit notification (total events = 6598)
[59616.081659] CPU1: Package power limit normal
[59616.081661] CPU0: Package power limit normal
[59616.081666] CPU2: Package power limit normal
[59616.081667] CPU3: Package power limit normal
[62751.506181] CPU2: Package power limit notification (total events = 6638)
[62751.506184] CPU3: Package power limit notification (total events = 6626)
[62751.506189] CPU1: Package power limit notification (total events = 6633)
[62751.506192] CPU0: Package power limit notification (total events = 6636)
[62751.506656] CPU2: Package power limit normal
[62751.506659] CPU0: Package power limit normal
[62751.506662] CPU1: Package power limit normal
[62751.506665] CPU3: Package power limit normal
[66811.437768] CPU3: Package power limit notification (total events = 6637)
[66811.437773] CPU1: Package power limit notification (total events = 6644)
[66811.437776] CPU2: Package power limit notification (total events = 6649)
[66811.437778] CPU0: Package power limit notification (total events = 6647)
[66811.460753] CPU2: Package power limit normal
[66811.460757] CPU1: Package power limit normal
[66811.460759] CPU3: Package power limit normal
[66811.460761] CPU0: Package power limit normal
[71793.071376] wlan0: deauthenticating from 00:0c:f6:69:3b:fd by local choice (reason=3)
[71793.085673] cfg80211: All devices are disconnected, going to restore regulatory settings
[71793.085680] cfg80211: Restoring regulatory settings
[71793.085686] cfg80211: Calling CRDA to update world regulatory domain
[71794.740178] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[71794.743401] cfg80211: World regulatory domain updated:
[71794.743406] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[71794.743410] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71794.743413] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[71794.743415] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[71794.743417] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71794.743419] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71797.159271] PM: Syncing filesystems ... done.
[71797.390735] PM: Preparing system for mem sleep
[71797.444901] Freezing user space processes ... (elapsed 0.01 seconds) done.
[71797.460828] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[71797.476775] PM: Entering mem sleep
[71797.476837] Suspending console(s) (use no_console_suspend to debug)
[71797.477166] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[71797.479893] sd 0:0:0:0: [sda] Stopping disk
[71797.495943] [drm] nouveau 0000:01:00.0: Disabling display...
[71797.560396] [drm] nouveau 0000:01:00.0: Disabling fbcon...
[71797.560405] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
[71797.560449] [drm] nouveau 0000:01:00.0: Evicting buffers...
[71797.561644] [drm] nouveau 0000:01:00.0: Idling channels...
[71797.561892] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
[71797.876034] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 380.144 msecs
[71798.044214] PM: suspend of drv:sd dev:0:0:0:0 complete after 567.736 msecs
[71798.044234] PM: suspend of drv:scsi dev:target0:0:0 complete after 567.702 msecs
[71798.044247] PM: suspend of drv:scsi dev:host0 complete after 567.469 msecs
[71798.044303] PM: suspend of drv: dev:ata1 complete after 567.301 msecs
[71798.059818] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 564.457 msecs
[71798.110486] [drm] nouveau 0000:01:00.0: And we're gone!
[71798.123844] nouveau 0000:01:00.0: power state changed by ACPI to D3
[71798.123855] PM: suspend of drv:nouveau dev:0000:01:00.0 complete after 628.668 msecs
[71798.123878] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 625.690 msecs
[71798.123896] PM: suspend of drv: dev:pci0000:00 complete after 625.701 msecs
[71798.123909] PM: suspend of devices complete after 647.711 msecs
[71798.123911] PM: suspend devices took 0.648 seconds
[71798.124102] PM: late suspend of devices complete after 0.188 msecs
[71798.139998] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
[71798.155975] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[71798.172077] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[71798.203782] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
[71798.219784] PM: noirq suspend of devices complete after 95.789 msecs
[71798.220138] ACPI: Preparing to enter system sleep state S3
[71798.343632] PM: Saving platform NVS memory
[71798.345187] Disabling non-boot CPUs ...
[71798.447408] CPU 1 is now offline
[71798.551291] CPU 2 is now offline
[71798.655167] CPU 3 is now offline
[71798.655678] Extended CMOS year: 2000
[71798.657196] ACPI: Low-level resume complete
[71798.657241] PM: Restoring platform NVS memory
[71798.657645] Extended CMOS year: 2000
[71798.657690] Enabling non-boot CPUs ...
[71798.657798] Booting Node 0 Processor 1 APIC 0x1
[71798.668202] Initializing CPU#1
[71798.672786] CPU1 is up
[71798.672880] Booting Node 0 Processor 2 APIC 0x2
[71798.683211] Initializing CPU#2
[71798.687698] CPU2 is up
[71798.687804] Booting Node 0 Processor 3 APIC 0x3
[71798.698189] Initializing CPU#3
[71798.702806] CPU3 is up
[71798.707853] ACPI: Waking up from system sleep state S3
[71798.901239] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
[71798.901408] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[71798.901860] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[71798.902744] PM: noirq resume of devices complete after 1.718 msecs
[71798.902926] PM: early resume of devices complete after 0.124 msecs
[71798.903003] i915 0000:00:02.0: setting latency timer to 64
[71798.903009] xhci_hcd 0000:00:14.0: setting latency timer to 64
[71798.903080] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[71798.903095] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[71798.903156] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[71798.903190] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[71798.903203] [drm] nouveau 0000:01:00.0: We're back, enabling device...
[71798.903217] ahci 0000:00:1f.2: setting latency timer to 64
[71798.903230] nouveau 0000:01:00.0: power state changed by ACPI to D0
[71798.903280] nouveau 0000:01:00.0: power state changed by ACPI to D0
[71798.903305] pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
[71798.908790] nouveau 0000:01:00.0: power state changed by ACPI to D0
[71798.908795] nouveau 0000:01:00.0: power state changed by ACPI to D0
[71798.908806] [drm] nouveau 0000:01:00.0: POSTing device...
[71798.908809] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x795C
[71798.909957] dpm_run_callback(): pnp_bus_resume+0x0/0x70 returns -19
[71798.909960] PM: Device 00:08 failed to resume: error -19
[71798.911011] Extended CMOS year: 2000
[71798.955859] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[71798.968963] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7FB8
[71798.972492] mei 0000:00:16.0: wd: failed to find the client
[71798.995788] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x924D
[71798.995793] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x9251
[71798.995848] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x9358
[71798.995849] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x93BD
[71799.015675] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[71799.020641] PM: resume of drv:hub dev:3-0:1.0 complete after 117.411 msecs
[71799.020647] PM: resume of drv:usb dev:3-4 complete after 116.676 msecs
[71799.020650] PM: resume of drv:usb dev:3-2 complete after 116.590 msecs
[71799.020652] PM: resume of drv: dev:ep_81 complete after 117.417 msecs
[71799.020664] PM: resume of drv: dev:ep_00 complete after 117.419 msecs
[71799.080580] PM: resume of drv: dev:ep_00 complete after 176.874 msecs
[71799.080596] PM: resume of drv:hub dev:1-1:1.0 complete after 176.927 msecs
[71799.080609] PM: resume of drv: dev:ep_81 complete after 176.923 msecs
[71799.089692] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[71799.090148] [drm] nouveau 0000:01:00.0: Restoring mode...
[71799.091739] [drm] nouveau 0000:01:00.0: no native mode, forcing panel scaling
[71799.093098] PM: resume of drv:usbhid dev:3-2:1.0 complete after 189.110 msecs
[71799.093100] PM: resume of drv: dev:ep_00 complete after 189.075 msecs
[71799.093106] PM: resume of drv: dev:ep_81 complete after 189.103 msecs
[71799.132836] usb 3-4: reset high-speed USB device number 3 using xhci_hcd
[71799.184081] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f7644a00
[71799.186350] PM: resume of drv:uvcvideo dev:3-4:1.1 complete after 282.522 msecs
[71799.186355] PM: resume of drv: dev:ep_00 complete after 282.507 msecs
[71799.186368] PM: resume of drv:uvcvideo dev:3-4:1.0 complete after 282.577 msecs
[71799.186389] PM: resume of drv: dev:ep_81 complete after 282.585 msecs
[71799.244444] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[71799.261415] ata5.00: configured for UDMA/133
[71799.292446] PM: resume of drv:scsi dev:host4 complete after 389.115 msecs
[71799.292478] PM: resume of drv:scsi dev:target4:0:0 complete after 388.885 msecs
[71799.292494] PM: resume of drv:sr dev:4:0:0:0 complete after 388.885 msecs
[71799.292499] PM: resume of drv:scsi_host dev:host4 complete after 389.150 msecs
[71799.292524] PM: resume of drv:scsi_device dev:4:0:0:0 complete after 388.898 msecs
[71801.202101] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[71801.374930] ata1.00: configured for UDMA/133
[71801.389909] PM: resume of drv:scsi dev:host0 complete after 2489.249 msecs
[71801.389914] PM: resume of drv:ata_port dev:ata1 complete after 2419.678 msecs
[71801.389937] PM: resume of drv:scsi_host dev:host0 complete after 2489.259 msecs
[71801.389943] PM: resume of drv:scsi dev:target0:0:0 complete after 2488.912 msecs
[71801.389954] PM: resume of drv:sd dev:0:0:0:0 complete after 2488.907 msecs
[71801.389962] sd 0:0:0:0: [sda] Starting disk
[71801.401342] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2500.285 msecs
[71801.401853] PM: resume of devices complete after 2501.914 msecs
[71801.401923] PM: resume devices took 2.504 seconds
[71801.402072] PM: Finishing wakeup.
[71801.402073] Restarting tasks ... done.
[71801.413802] video LNXVIDEO:00: Restoring backlight state
[71801.413807] video LNXVIDEO:01: Restoring backlight state
[71802.142068] r8169 0000:03:00.2: eth0: link down
[71802.142237] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[71802.156138] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[71809.928574] wlan0: authenticate with 00:0c:f6:69:3b:fd
[71809.934099] wlan0: send auth to 00:0c:f6:69:3b:fd (try 1/3)
[71809.936119] wlan0: authenticated
[71809.939561] wlan0: associate with 00:0c:f6:69:3b:fd (try 1/3)
[71809.943593] wlan0: RX AssocResp from 00:0c:f6:69:3b:fd (capab=0x411 status=0 aid=3)
[71809.943666] wlan0: associated
[71809.943799] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[71809.944416] cfg80211: Calling CRDA for country: US
[71809.948092] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[71809.948096] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[71809.948099] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[71809.948101] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[71809.948103] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[71809.948105] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[71809.948107] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[71809.948110] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[71809.948111] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[71809.948113] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[71809.948115] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[71809.948118] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[71809.948119] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[71809.948122] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[71809.948123] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[71809.948126] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[71809.948127] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[71809.948129] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[71809.948131] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[71809.948133] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[71809.948135] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[71809.948137] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[71809.948139] cfg80211: Disabling freq 2467 MHz
[71809.948141] cfg80211: Disabling freq 2472 MHz
[71809.948143] cfg80211: Disabling freq 2484 MHz
[71809.948145] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[71809.948147] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[71809.948149] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[71809.948151] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[71809.948153] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[71809.948155] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[71809.948157] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[71809.948160] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[71809.948162] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[71809.948163] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948166] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[71809.948168] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948169] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[71809.948172] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948173] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[71809.948176] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948178] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[71809.948180] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948182] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[71809.948184] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948186] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[71809.948188] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948190] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[71809.948193] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948194] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[71809.948197] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948198] cfg80211: Disabling freq 5600 MHz
[71809.948200] cfg80211: Disabling freq 5620 MHz
[71809.948201] cfg80211: Disabling freq 5640 MHz
[71809.948203] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[71809.948206] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948208] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[71809.948210] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948212] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[71809.948214] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948216] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[71809.948218] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[71809.948220] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[71809.948223] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[71809.948225] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[71809.948227] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[71809.948229] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[71809.948231] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[71809.948234] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[71809.948236] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[71809.948243] ath: regdomain 0x8348 updated by CountryIE
[71809.948245] ath: EEPROM regdomain: 0x8348
[71809.948247] ath: EEPROM indicates we should expect a country code
[71809.948249] ath: doing EEPROM country->regdmn map search
[71809.948251] ath: country maps to regdmn code: 0x3a
[71809.948252] ath: Country alpha2 being used: US
[71809.948254] ath: Regpair used: 0x3a
[71809.948285] cfg80211: Regulatory domain changed to country: US
[71809.948287] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[71809.948290] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[71809.948292] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[71809.948294] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948296] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948298] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[71809.948300] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[71812.141430] CPU1: Package power limit notification (total events = 6648)
[71812.141433] CPU3: Package power limit notification (total events = 6641)
[71812.141435] CPU2: Package power limit notification (total events = 6653)
[71812.141436] CPU0: Package power limit notification (total events = 6651)
[71812.152436] CPU1: Package power limit normal
[71812.152438] CPU2: Package power limit normal
[71812.152439] CPU3: Package power limit normal
[71812.152441] CPU0: Package power limit normal
[72121.225097] CPU0: Package power limit notification (total events = 6808)
[72121.225099] CPU1: Package power limit notification (total events = 6805)
[72121.225101] CPU2: Package power limit notification (total events = 6811)
[72121.225103] CPU3: Package power limit notification (total events = 6801)
[72121.225157] CPU0: Package power limit normal
[72121.225158] CPU2: Package power limit normal
[72121.225159] CPU1: Package power limit normal
[72121.225160] CPU3: Package power limit normal
[72432.007576] CPU2: Package power limit notification (total events = 7198)
[72432.007578] CPU3: Package power limit notification (total events = 7189)
[72432.007581] CPU1: Package power limit notification (total events = 7190)
[72432.007582] CPU0: Package power limit notification (total events = 7194)
[72432.007789] CPU1: Package power limit normal
[72432.007791] CPU2: Package power limit normal
[72432.007793] CPU3: Package power limit normal
[72432.007794] CPU0: Package power limit normal
[72736.403187] CPU1: Package power limit notification (total events = 7564)
[72736.403191] CPU2: Package power limit notification (total events = 7572)
[72736.403193] CPU3: Package power limit notification (total events = 7563)
[72736.403194] CPU0: Package power limit notification (total events = 7567)
[72736.414214] CPU2: Package power limit normal
[72736.414215] CPU3: Package power limit normal
[72736.414217] CPU1: Package power limit normal
[72736.414219] CPU0: Package power limit normal
[73036.312570] CPU0: Package power limit notification (total events = 8003)
[73036.312572] CPU1: Package power limit notification (total events = 8003)
[73036.312600] CPU2: Package power limit notification (total events = 8009)
[73036.312601] CPU3: Package power limit notification (total events = 7999)
[73036.313681] CPU1: Package power limit normal
[73036.313682] CPU0: Package power limit normal
[73036.313698] CPU3: Package power limit normal
[73036.313699] CPU2: Package power limit normal
[73343.470650] CPU0: Package power limit notification (total events = 8262)
[73343.470653] CPU3: Package power limit notification (total events = 8260)
[73343.470655] CPU2: Package power limit notification (total events = 8267)
[73343.470656] CPU1: Package power limit notification (total events = 8261)
[73343.470709] CPU3: Package power limit normal
[73343.470710] CPU1: Package power limit normal
[73343.470711] CPU2: Package power limit normal
[73343.470712] CPU0: Package power limit normal
[73679.622332] CPU2: Package power limit notification (total events = 8569)
[73679.622334] CPU3: Package power limit notification (total events = 8562)
[73679.622356] CPU1: Package power limit notification (total events = 8571)
[73679.622359] CPU0: Package power limit notification (total events = 8566)
[73679.622760] CPU2: Package power limit normal
[73679.622761] CPU3: Package power limit normal
[73679.622782] CPU0: Package power limit normal
[73679.622783] CPU1: Package power limit normal
[74012.222240] CPU1: Package power limit notification (total events = 8597)
[74012.222244] CPU3: Package power limit notification (total events = 8588)
[74012.222246] CPU2: Package power limit notification (total events = 8595)
[74012.222248] CPU0: Package power limit notification (total events = 8592)
[74012.222991] CPU3: Package power limit normal
[74012.222993] CPU2: Package power limit normal
[74012.223012] CPU1: Package power limit normal
[74012.223014] CPU0: Package power limit normal
[74579.931452] CPU1: Package power limit notification (total events = 8605)
[74579.931455] CPU2: Package power limit notification (total events = 8603)
[74579.931457] CPU3: Package power limit notification (total events = 8596)
[74579.931459] CPU0: Package power limit notification (total events = 8600)
[74579.931763] CPU2: Package power limit normal
[74579.931765] CPU1: Package power limit normal
[74579.931766] CPU3: Package power limit normal
[74579.931767] CPU0: Package power limit normal
[74903.833011] CPU1: Package power limit notification (total events = 8772)
[74903.833014] CPU2: Package power limit notification (total events = 8768)
[74903.833016] CPU3: Package power limit notification (total events = 8761)
[74903.833018] CPU0: Package power limit notification (total events = 8770)
[74903.834209] CPU1: Package power limit normal
[74903.834211] CPU0: Package power limit normal
[74903.834438] CPU2: Package power limit normal
[74903.834440] CPU3: Package power limit normal
[75290.594005] CPU1: Package power limit notification (total events = 8879)
[75290.594008] CPU2: Package power limit notification (total events = 8874)
[75290.594010] CPU3: Package power limit notification (total events = 8864)
[75290.594011] CPU0: Package power limit notification (total events = 8874)
[75290.594058] CPU2: Package power limit normal
[75290.594059] CPU1: Package power limit normal
[75290.594061] CPU3: Package power limit normal
[75290.594062] CPU0: Package power limit normal
[75624.528333] CPU1: Package power limit notification (total events = 8908)
[75624.528336] CPU2: Package power limit notification (total events = 8902)
[75624.528339] CPU3: Package power limit notification (total events = 8892)
[75624.528340] CPU0: Package power limit notification (total events = 8902)
[75624.539391] CPU2: Package power limit normal
[75624.539393] CPU3: Package power limit normal
[75624.539401] CPU1: Package power limit normal
[75624.539403] CPU0: Package power limit normal
[75941.905939] CPU2: Package power limit notification (total events = 9105)
[75941.905944] CPU1: Package power limit notification (total events = 9109)
[75941.905945] CPU0: Package power limit notification (total events = 9103)
[75941.905947] CPU3: Package power limit notification (total events = 9093)
[75941.906203] CPU1: Package power limit normal
[75941.906204] CPU0: Package power limit normal
[75941.906206] CPU2: Package power limit normal
[75941.906207] CPU3: Package power limit normal
[76121.915420] usb 3-1: new high-speed USB device number 6 using xhci_hcd
[76121.945812] usb 3-1: New USB device found, idVendor=054c, idProduct=02a5
[76121.945818] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[76121.945822] usb 3-1: Product: Storage Media
[76121.945824] usb 3-1: Manufacturer: Sony
[76121.945827] usb 3-1: SerialNumber: 9B3001103030007631
[76121.946210] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[76121.946218] usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[76121.946623] scsi8 : usb-storage 3-1:1.0
[76123.181565] scsi 8:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
[76123.182573] sd 8:0:0:0: Attached scsi generic sg2 type 0
[76123.183703] sd 8:0:0:0: [sdb] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB)
[76123.184189] sd 8:0:0:0: [sdb] Write Protect is off
[76123.184194] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
[76123.184784] sd 8:0:0:0: [sdb] No Caching mode page present
[76123.184788] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[76123.186929] sd 8:0:0:0: [sdb] No Caching mode page present
[76123.186934] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[76123.187800]  sdb: sdb1
[76123.189367] sd 8:0:0:0: [sdb] No Caching mode page present
[76123.189372] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[76123.189376] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[76132.626365] sdb: detected capacity change from 8002732032 to 0
[76136.555520] usb 3-1: USB disconnect, device number 6
[76244.973147] CPU3: Package power limit notification (total events = 9300)
[76244.973150] CPU1: Package power limit notification (total events = 9318)
[76244.973152] CPU0: Package power limit notification (total events = 9312)
[76244.973154] CPU2: Package power limit notification (total events = 9312)
[76244.974192] CPU0: Package power limit normal
[76244.974194] CPU1: Package power limit normal
[76244.974219] CPU3: Package power limit normal
[76244.974221] CPU2: Package power limit normal
[76608.005693] CPU2: Package power limit notification (total events = 9420)
[76608.005697] CPU1: Package power limit notification (total events = 9428)
[76608.005699] CPU3: Package power limit notification (total events = 9408)
[76608.005701] CPU0: Package power limit notification (total events = 9422)
[76608.006414] CPU1: Package power limit normal
[76608.006416] CPU2: Package power limit normal
[76608.006417] CPU3: Package power limit normal
[76608.006418] CPU0: Package power limit normal
[76929.607773] CPU2: Package power limit notification (total events = 9726)
[76929.607775] CPU3: Package power limit notification (total events = 9715)
[76929.607778] CPU0: Package power limit notification (total events = 9730)
[76929.607780] CPU1: Package power limit notification (total events = 9737)
[76929.607973] CPU0: Package power limit normal
[76929.607975] CPU2: Package power limit normal
[76929.607976] CPU1: Package power limit normal
[76929.607977] CPU3: Package power limit normal
[77229.844961] CPU1: Package power limit notification (total events = 10072)
[77229.844964] CPU3: Package power limit notification (total events = 10048)
[77229.844965] CPU2: Package power limit notification (total events = 10060)
[77229.844967] CPU0: Package power limit notification (total events = 10065)
[77229.855947] CPU2: Package power limit normal
[77229.855948] CPU3: Package power limit normal
[77229.855963] CPU0: Package power limit normal
[77229.855964] CPU1: Package power limit normal
[82386.496377] CPU2: Package power limit notification (total events = 10327)
[82386.496379] CPU3: Package power limit notification (total events = 10315)
[82386.496397] CPU0: Package power limit notification (total events = 10333)
[82386.496400] CPU1: Package power limit notification (total events = 10339)
[82386.496749] CPU2: Package power limit normal
[82386.496750] CPU3: Package power limit normal
[82386.496752] CPU0: Package power limit normal
[82386.496753] CPU1: Package power limit normal
[83697.160163] wlan0: deauthenticating from 00:0c:f6:69:3b:fd by local choice (reason=3)
[83697.184688] cfg80211: All devices are disconnected, going to restore regulatory settings
[83697.184695] cfg80211: Restoring regulatory settings
[83697.184701] cfg80211: Calling CRDA to update world regulatory domain
[83697.350748] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[83697.353960] cfg80211: World regulatory domain updated:
[83697.353963] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[83697.353967] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83697.353971] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[83697.353974] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[83697.353977] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83697.353979] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83700.072670] PM: Syncing filesystems ... done.
[83700.249335] PM: Preparing system for mem sleep
[83700.298411] Freezing user space processes ... (elapsed 0.01 seconds) done.
[83700.314345] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[83700.330280] PM: Entering mem sleep
[83700.330339] Suspending console(s) (use no_console_suspend to debug)
[83700.330634] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[83700.330768] sd 0:0:0:0: [sda] Stopping disk
[83700.348098] [drm] nouveau 0000:01:00.0: Disabling display...
[83700.411738] [drm] nouveau 0000:01:00.0: Disabling fbcon...
[83700.411746] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
[83700.411785] [drm] nouveau 0000:01:00.0: Evicting buffers...
[83700.412738] [drm] nouveau 0000:01:00.0: Idling channels...
[83700.412986] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
[83700.729697] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 379.576 msecs
[83700.894579] PM: suspend of drv:sd dev:0:0:0:0 complete after 564.625 msecs
[83700.894593] PM: suspend of drv:scsi dev:target0:0:0 complete after 564.626 msecs
[83700.894605] PM: suspend of drv:scsi dev:host0 complete after 564.478 msecs
[83700.894663] PM: suspend of drv: dev:ata1 complete after 564.412 msecs
[83700.909482] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 559.867 msecs
[83700.960940] [drm] nouveau 0000:01:00.0: And we're gone!
[83700.973508] nouveau 0000:01:00.0: power state changed by ACPI to D3
[83700.973519] PM: suspend of drv:nouveau dev:0000:01:00.0 complete after 626.172 msecs
[83700.973568] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 622.963 msecs
[83700.973587] PM: suspend of drv: dev:pci0000:00 complete after 622.979 msecs
[83700.973617] PM: suspend of devices complete after 643.922 msecs
[83700.973619] PM: suspend devices took 0.644 seconds
[83700.973811] PM: late suspend of devices complete after 0.188 msecs
[83700.989663] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
[83701.005632] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[83701.021735] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[83701.053443] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
[83701.069450] PM: noirq suspend of devices complete after 95.747 msecs
[83701.069804] ACPI: Preparing to enter system sleep state S3
[83701.193295] PM: Saving platform NVS memory
[83701.194877] Disabling non-boot CPUs ...
[83701.297072] CPU 1 is now offline
[83701.400951] CPU 2 is now offline
[83701.504820] CPU 3 is now offline
[83701.505379] Extended CMOS year: 2000
[83701.506900] ACPI: Low-level resume complete
[83701.506943] PM: Restoring platform NVS memory
[83701.507348] Extended CMOS year: 2000
[83701.507394] Enabling non-boot CPUs ...
[83701.507501] Booting Node 0 Processor 1 APIC 0x1
[83701.517905] Initializing CPU#1
[83701.522475] CPU1 is up
[83701.522589] Booting Node 0 Processor 2 APIC 0x2
[83701.532921] Initializing CPU#2
[83701.537374] CPU2 is up
[83701.537470] Booting Node 0 Processor 3 APIC 0x3
[83701.547855] Initializing CPU#3
[83701.552392] CPU3 is up
[83701.557516] ACPI: Waking up from system sleep state S3
[83701.750774] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
[83701.750904] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[83701.751246] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[83701.751983] PM: noirq resume of devices complete after 1.391 msecs
[83701.752117] PM: early resume of devices complete after 0.106 msecs
[83701.752185] i915 0000:00:02.0: setting latency timer to 64
[83701.752191] xhci_hcd 0000:00:14.0: setting latency timer to 64
[83701.752266] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[83701.752287] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[83701.752401] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[83701.752403] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[83701.752467] ahci 0000:00:1f.2: setting latency timer to 64
[83701.752496] [drm] nouveau 0000:01:00.0: We're back, enabling device...
[83701.752746] pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
[83701.752874] nouveau 0000:01:00.0: power state changed by ACPI to D0
[83701.752886] nouveau 0000:01:00.0: power state changed by ACPI to D0
[83701.752892] nouveau 0000:01:00.0: power state changed by ACPI to D0
[83701.752896] nouveau 0000:01:00.0: power state changed by ACPI to D0
[83701.752906] [drm] nouveau 0000:01:00.0: POSTing device...
[83701.752909] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x795C
[83701.754863] dpm_run_callback(): pnp_bus_resume+0x0/0x70 returns -19
[83701.754866] PM: Device 00:08 failed to resume: error -19
[83701.755899] Extended CMOS year: 2000
[83701.757619] mei 0000:00:16.0: wd: failed to find the client
[83701.805778] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[83701.813073] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7FB8
[83701.839898] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x924D
[83701.839903] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x9251
[83701.839958] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x9358
[83701.839959] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x93BD
[83701.859784] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[83701.870302] PM: resume of drv: dev:ep_00 complete after 117.577 msecs
[83701.870307] PM: resume of drv:usb dev:3-4 complete after 116.815 msecs
[83701.870322] PM: resume of drv:usb dev:3-2 complete after 116.730 msecs
[83701.870325] PM: resume of drv:hub dev:3-0:1.0 complete after 117.612 msecs
[83701.870333] PM: resume of drv: dev:ep_81 complete after 117.614 msecs
[83701.930242] PM: resume of drv:hub dev:1-1:1.0 complete after 177.081 msecs
[83701.930261] PM: resume of drv: dev:ep_00 complete after 177.063 msecs
[83701.930265] PM: resume of drv: dev:ep_81 complete after 177.084 msecs
[83701.934810] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[83701.935262] [drm] nouveau 0000:01:00.0: Restoring mode...
[83701.936854] [drm] nouveau 0000:01:00.0: no native mode, forcing panel scaling
[83701.942667] PM: resume of drv:usbhid dev:3-2:1.0 complete after 189.142 msecs
[83701.942674] PM: resume of drv: dev:ep_00 complete after 189.109 msecs
[83701.942678] PM: resume of drv: dev:ep_81 complete after 189.133 msecs
[83701.982494] usb 3-4: reset high-speed USB device number 3 using xhci_hcd
[83702.033807] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f7644a00
[83702.036099] PM: resume of drv: dev:ep_00 complete after 282.721 msecs
[83702.036105] PM: resume of drv:uvcvideo dev:3-4:1.1 complete after 282.743 msecs
[83702.036118] PM: resume of drv:uvcvideo dev:3-4:1.0 complete after 282.783 msecs
[83702.036138] PM: resume of drv: dev:ep_81 complete after 282.805 msecs
[83702.086120] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[83702.103077] ata5.00: configured for UDMA/133
[83702.134144] PM: resume of drv:scsi dev:host4 complete after 381.326 msecs
[83702.134211] PM: resume of drv:scsi_host dev:host4 complete after 381.365 msecs
[83702.134214] PM: resume of drv:scsi dev:target4:0:0 complete after 381.083 msecs
[83702.134253] PM: resume of drv:sr dev:4:0:0:0 complete after 381.115 msecs
[83702.134315] PM: resume of drv:scsi_device dev:4:0:0:0 complete after 381.148 msecs
[83704.171635] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[83704.350636] ata1.00: configured for UDMA/133
[83704.363457] PM: resume of drv:scsi dev:host0 complete after 2613.464 msecs
[83704.363461] PM: resume of drv:ata_port dev:ata1 complete after 2559.714 msecs
[83704.363483] PM: resume of drv:scsi dev:target0:0:0 complete after 2613.095 msecs
[83704.363492] PM: resume of drv:sd dev:0:0:0:0 complete after 2613.084 msecs
[83704.363497] sd 0:0:0:0: [sda] Starting disk
[83704.363508] PM: resume of drv:scsi_host dev:host0 complete after 2613.501 msecs
[83704.377047] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2626.630 msecs
[83704.377516] PM: resume of devices complete after 2628.538 msecs
[83704.377586] PM: resume devices took 2.628 seconds
[83704.377733] PM: Finishing wakeup.
[83704.377734] Restarting tasks ... done.
[83704.384102] video LNXVIDEO:00: Restoring backlight state
[83704.384106] video LNXVIDEO:01: Restoring backlight state
[83705.047773] r8169 0000:03:00.2: eth0: link down
[83705.047957] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[83705.063522] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[83710.790537] CPU1: Package power limit notification (total events = 10353)
[83710.790540] CPU2: Package power limit notification (total events = 10341)
[83710.790542] CPU3: Package power limit notification (total events = 10329)
[83710.790544] CPU0: Package power limit notification (total events = 10347)
[83710.801458] CPU2: Package power limit normal
[83710.801461] CPU3: Package power limit normal
[83710.801466] CPU1: Package power limit normal
[83710.801468] CPU0: Package power limit normal
[83712.845611] wlan0: authenticate with 00:0c:f6:69:3b:fd
[83712.851560] wlan0: send auth to 00:0c:f6:69:3b:fd (try 1/3)
[83712.853477] wlan0: authenticated
[83712.857238] wlan0: associate with 00:0c:f6:69:3b:fd (try 1/3)
[83712.861219] wlan0: RX AssocResp from 00:0c:f6:69:3b:fd (capab=0x411 status=0 aid=2)
[83712.861289] wlan0: associated
[83712.861395] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[83712.861664] cfg80211: Calling CRDA for country: US
[83712.864629] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[83712.864632] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[83712.864634] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[83712.864635] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[83712.864637] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[83712.864638] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[83712.864639] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[83712.864641] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[83712.864642] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[83712.864643] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[83712.864645] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[83712.864646] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[83712.864647] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[83712.864649] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[83712.864650] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[83712.864651] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[83712.864653] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[83712.864654] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[83712.864655] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[83712.864657] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[83712.864658] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[83712.864659] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[83712.864660] cfg80211: Disabling freq 2467 MHz
[83712.864661] cfg80211: Disabling freq 2472 MHz
[83712.864663] cfg80211: Disabling freq 2484 MHz
[83712.864664] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[83712.864665] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[83712.864667] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[83712.864668] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[83712.864669] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[83712.864671] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[83712.864672] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[83712.864673] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[83712.864675] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[83712.864676] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864677] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[83712.864679] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864680] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[83712.864681] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864682] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[83712.864684] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864685] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[83712.864686] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864687] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[83712.864689] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864690] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[83712.864691] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864693] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[83712.864694] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864695] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[83712.864697] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864698] cfg80211: Disabling freq 5600 MHz
[83712.864699] cfg80211: Disabling freq 5620 MHz
[83712.864700] cfg80211: Disabling freq 5640 MHz
[83712.864701] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[83712.864702] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864704] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[83712.864705] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864706] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[83712.864707] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864709] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[83712.864710] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[83712.864711] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[83712.864713] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[83712.864714] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[83712.864715] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[83712.864717] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[83712.864718] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[83712.864719] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[83712.864720] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[83712.864725] ath: regdomain 0x8348 updated by CountryIE
[83712.864726] ath: EEPROM regdomain: 0x8348
[83712.864727] ath: EEPROM indicates we should expect a country code
[83712.864729] ath: doing EEPROM country->regdmn map search
[83712.864730] ath: country maps to regdmn code: 0x3a
[83712.864732] ath: Country alpha2 being used: US
[83712.864732] ath: Regpair used: 0x3a
[83712.864761] cfg80211: Regulatory domain changed to country: US
[83712.864762] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[83712.864763] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[83712.864764] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[83712.864766] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864767] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864768] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[83712.864769] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[84016.253319] CPU0: Package power limit notification (total events = 10770)
[84016.253333] CPU1: Package power limit notification (total events = 10773)
[84016.253344] CPU2: Package power limit notification (total events = 10761)
[84016.253346] CPU3: Package power limit notification (total events = 10750)
[84016.253442] CPU1: Package power limit normal
[84016.253443] CPU0: Package power limit normal
[84016.253472] CPU3: Package power limit normal
[84016.253473] CPU2: Package power limit normal
[84316.782861] CPU3: Package power limit notification (total events = 11187)
[84316.782864] CPU1: Package power limit notification (total events = 11210)
[84316.782865] CPU0: Package power limit notification (total events = 11207)
[84316.782867] CPU2: Package power limit notification (total events = 11201)
[84316.784713] CPU3: Package power limit normal
[84316.784714] CPU2: Package power limit normal
[84316.784738] CPU0: Package power limit normal
[84316.784740] CPU1: Package power limit normal
[84616.549442] CPU2: Package power limit notification (total events = 11867)
[84616.549444] CPU3: Package power limit notification (total events = 11853)
[84616.549446] CPU0: Package power limit notification (total events = 11868)
[84616.549448] CPU1: Package power limit notification (total events = 11873)
[84616.562401] CPU0: Package power limit normal
[84616.562405] CPU3: Package power limit normal
[84616.562407] CPU2: Package power limit normal
[84616.562409] CPU1: Package power limit normal
[84654.564823] type=1400 audit(1376032988.674:36): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=15582 comm="apparmor_parser"
[84654.565403] type=1400 audit(1376032988.674:37): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=15582 comm="apparmor_parser"
[84901.725137] type=1400 audit(1376033236.130:38): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=18342 comm="apparmor_parser"
[84901.808230] type=1400 audit(1376033236.214:39): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=18378 comm="apparmor_parser"
[84901.809305] init: mysql pre-start process (18373) terminated with status 127
[84918.186144] CPU0: Package power limit notification (total events = 12601)
[84918.186146] CPU1: Package power limit notification (total events = 12606)
[84918.186158] CPU2: Package power limit notification (total events = 12598)
[84918.186160] CPU3: Package power limit notification (total events = 12584)
[84918.187304] CPU1: Package power limit normal
[84918.187305] CPU0: Package power limit normal
[84918.187316] CPU3: Package power limit normal
[84918.187317] CPU2: Package power limit normal
[84925.416004] type=1400 audit(1376033259.850:40): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=18649 comm="apparmor_parser"
[84925.443955] type=1400 audit(1376033259.878:41): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=18683 comm="apparmor_parser"
[84925.444834] init: mysql pre-start process (18678) terminated with status 127
[85004.970452] type=1400 audit(1376033339.498:42): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=19064 comm="apparmor_parser"
[85005.000240] type=1400 audit(1376033339.530:43): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=19099 comm="apparmor_parser"
[85005.001430] init: mysql pre-start process (19094) terminated with status 127