[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 [ 0.000000] Linux version 5.8.0-25-generic (buildd@lcy01-amd64-022) (gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, GNU ld (GNU Binutils for Ubuntu) 2.35.1) #26-Ubuntu SMP Thu Oct 15 10:30:38 UTC 2020 (Ubuntu 5.8.0-25.26-generic 5.8.14) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-25-generic root=UUID=694dacef-c80d-436a-8434-767b308d9087 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9c50fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9c51000-0x00000000b9f82fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9f83000-0x00000000bc58cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc58d000-0x00000000bcebcfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bcebd000-0x00000000bcfbcfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bcfbd000-0x00000000bcffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe90000-0x00000000ffe96fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xb7194018-0xb71a4057] usable ==> usable [ 0.000000] e820: update [mem 0xb7194018-0xb71a4057] usable ==> usable [ 0.000000] e820: update [mem 0xb718b018-0xb7193e57] usable ==> usable [ 0.000000] e820: update [mem 0xb718b018-0xb7193e57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b718b017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b718b018-0x00000000b7193e57] usable [ 0.000000] reserve setup_data: [mem 0x00000000b7193e58-0x00000000b7194017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b7194018-0x00000000b71a4057] usable [ 0.000000] reserve setup_data: [mem 0x00000000b71a4058-0x00000000b9c50fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b9c51000-0x00000000b9f82fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b9f83000-0x00000000bc58cfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bc58d000-0x00000000bcebcfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bcebd000-0x00000000bcfbcfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000bcfbd000-0x00000000bcffefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000bcfff000-0x00000000bcffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffe90000-0x00000000ffe96fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000023dffffff] usable [ 0.000000] efi: EFI v2.00 by HPQ [ 0.000000] efi: ACPI=0xbcffe000 ACPI 2.0=0xbcffe014 SMBIOS=0xbc66d698 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 2760p/162A, BIOS 68SOU Ver. F.42 07/15/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.265 MHz processor [ 0.001271] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001272] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001279] last_pfn = 0x23e000 max_arch_pfn = 0x400000000 [ 0.001284] MTRR default type: uncachable [ 0.001285] MTRR fixed ranges enabled: [ 0.001286] 00000-9FFFF write-back [ 0.001287] A0000-BFFFF uncachable [ 0.001288] C0000-FFFFF write-protect [ 0.001288] MTRR variable ranges enabled: [ 0.001290] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.001291] 1 base 000000000 mask F80000000 write-back [ 0.001292] 2 base 080000000 mask FC0000000 write-back [ 0.001292] 3 base 0BE000000 mask FFE000000 uncachable [ 0.001293] 4 base 0BD800000 mask FFF800000 uncachable [ 0.001294] 5 base 100000000 mask F00000000 write-back [ 0.001295] 6 base 200000000 mask FC0000000 write-back [ 0.001296] 7 base 23E000000 mask FFE000000 uncachable [ 0.001296] 8 disabled [ 0.001297] 9 disabled [ 0.002017] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002153] last_pfn = 0xbd000 max_arch_pfn = 0x400000000 [ 0.012033] check: Scanning 1 areas for low memory corruption [ 0.012037] reserving inaccessible SNB gfx pages [ 0.012666] secureboot: Secure boot disabled [ 0.012667] RAMDISK: [mem 0x3cec4000-0x3fffdfff] [ 0.012676] ACPI: Early table checksum verification disabled [ 0.012679] ACPI: RSDP 0x00000000BCFFE014 000024 (v02 HPQOEM) [ 0.012683] ACPI: XSDT 0x00000000BCFFE120 000084 (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 0.012689] ACPI: FACP 0x00000000BCFFC000 0000F4 (v03 HPQOEM 162A 0000000F HP 00000001) [ 0.012695] ACPI: DSDT 0x00000000BCFD1000 025E77 (v02 HPQOEM 162A 00000001 INTL 20060912) [ 0.012698] ACPI: FACS 0x00000000BCF87000 000040 [ 0.012700] ACPI: FACS 0x00000000BCF87000 000040 [ 0.012703] ACPI: HPET 0x00000000BCFFB000 000038 (v01 HPQOEM 162A 00000001 HP 00000001) [ 0.012705] ACPI: APIC 0x00000000BCFFA000 0000BC (v01 HPQOEM 162A 00000001 HP 00000001) [ 0.012708] ACPI: MCFG 0x00000000BCFF9000 00003C (v01 HPQOEM 162A 00000001 HP 00000001) [ 0.012711] ACPI: TCPA 0x00000000BCFF7000 000032 (v02 HPQOEM 162A 00000000 HP 00000001) [ 0.012714] ACPI: SSDT 0x00000000BCFD0000 00064F (v01 HPQOEM SataPri 00001000 INTL 20060912) [ 0.012717] ACPI: SSDT 0x00000000BCFCF000 000692 (v01 HPQOEM SataSec 00001000 INTL 20060912) [ 0.012720] ACPI: SSDT 0x00000000BCFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912) [ 0.012722] ACPI: SLIC 0x00000000BCFCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.012725] ACPI: SSDT 0x00000000BCFCB000 000810 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.012728] ACPI: SSDT 0x00000000BCFCA000 0009B1 (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.012731] ACPI: ASF! 0x00000000BCFF8000 0000A5 (v32 HPQOEM 162A 00000001 HP 00000001) [ 0.012740] ACPI: Local APIC address 0xfee00000 [ 0.012792] No NUMA configuration found [ 0.012793] Faking a node at [mem 0x0000000000000000-0x000000023dffffff] [ 0.012804] NODE_DATA(0) allocated [mem 0x23dfd2000-0x23dffbfff] [ 0.013261] Zone ranges: [ 0.013261] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.013263] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.013264] Normal [mem 0x0000000100000000-0x000000023dffffff] [ 0.013265] Device empty [ 0.013265] Movable zone start for each node [ 0.013269] Early memory node ranges [ 0.013269] node 0: [mem 0x0000000000001000-0x000000000008efff] [ 0.013270] node 0: [mem 0x0000000000090000-0x000000000009ffff] [ 0.013271] node 0: [mem 0x0000000000100000-0x00000000b9c50fff] [ 0.013272] node 0: [mem 0x00000000b9f83000-0x00000000bc58cfff] [ 0.013273] node 0: [mem 0x00000000bcfff000-0x00000000bcffffff] [ 0.013273] node 0: [mem 0x0000000100000000-0x000000023dffffff] [ 0.013529] Zeroed struct page in unavailable ranges: 24070 pages [ 0.013531] Initmem setup node 0 [mem 0x0000000000001000-0x000000023dffffff] [ 0.013533] On node 0 totalpages: 2073082 [ 0.013534] DMA zone: 64 pages used for memmap [ 0.013534] DMA zone: 1182 pages reserved [ 0.013535] DMA zone: 3998 pages, LIFO batch:0 [ 0.013561] DMA32 zone: 11978 pages used for memmap [ 0.013562] DMA32 zone: 766556 pages, LIFO batch:63 [ 0.019071] Normal zone: 20352 pages used for memmap [ 0.019072] Normal zone: 1302528 pages, LIFO batch:63 [ 0.028464] Reserving Intel graphics memory at [mem 0xbda00000-0xbf9fffff] [ 0.028712] ACPI: PM-Timer IO Port: 0x408 [ 0.028714] ACPI: Local APIC address 0xfee00000 [ 0.028723] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028724] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028724] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028725] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028726] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.028726] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.028727] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.028727] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.028739] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028741] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028743] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028744] ACPI: IRQ0 used by override. [ 0.028745] ACPI: IRQ9 used by override. [ 0.028748] Using ACPI (MADT) for SMP configuration information [ 0.028749] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.028754] TSC deadline timer available [ 0.028755] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.028774] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028775] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.028777] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.028778] PM: hibernation: Registered nosave memory: [mem 0xb718b000-0xb718bfff] [ 0.028780] PM: hibernation: Registered nosave memory: [mem 0xb7193000-0xb7193fff] [ 0.028781] PM: hibernation: Registered nosave memory: [mem 0xb7194000-0xb7194fff] [ 0.028782] PM: hibernation: Registered nosave memory: [mem 0xb71a4000-0xb71a4fff] [ 0.028784] PM: hibernation: Registered nosave memory: [mem 0xb9c51000-0xb9f82fff] [ 0.028785] PM: hibernation: Registered nosave memory: [mem 0xbc58d000-0xbcebcfff] [ 0.028786] PM: hibernation: Registered nosave memory: [mem 0xbcebd000-0xbcfbcfff] [ 0.028787] PM: hibernation: Registered nosave memory: [mem 0xbcfbd000-0xbcffefff] [ 0.028788] PM: hibernation: Registered nosave memory: [mem 0xbd000000-0xbd9fffff] [ 0.028789] PM: hibernation: Registered nosave memory: [mem 0xbda00000-0xbf9fffff] [ 0.028789] PM: hibernation: Registered nosave memory: [mem 0xbfa00000-0xe00f7fff] [ 0.028790] PM: hibernation: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.028791] PM: hibernation: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] [ 0.028791] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.028792] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xffe8ffff] [ 0.028792] PM: hibernation: Registered nosave memory: [mem 0xffe90000-0xffe96fff] [ 0.028793] PM: hibernation: Registered nosave memory: [mem 0xffe97000-0xffffffff] [ 0.028795] [mem 0xbfa00000-0xe00f7fff] available for PCI devices [ 0.028796] Booting paravirtualized kernel on bare hardware [ 0.028799] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.028807] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.029033] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144 [ 0.029041] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152 [ 0.029041] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.029075] Built 1 zonelists, mobility grouping on. Total pages: 2039506 [ 0.029076] Policy zone: Normal [ 0.029077] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-25-generic root=UUID=694dacef-c80d-436a-8434-767b308d9087 ro quiet splash vt.handoff=7 [ 0.029641] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.029883] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.029975] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.055832] Memory: 7920216K/8292328K available (14339K kernel code, 2535K rwdata, 8792K rodata, 2636K init, 4924K bss, 372112K reserved, 0K cma-reserved) [ 0.055840] random: get_random_u64 called from kmem_cache_open+0x2b/0x240 with crng_init=0 [ 0.055977] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.055990] Kernel/User page tables isolation: enabled [ 0.056008] ftrace: allocating 48582 entries in 190 pages [ 0.075530] ftrace: allocated 190 pages with 6 groups [ 0.075665] rcu: Hierarchical RCU implementation. [ 0.075667] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.075667] Trampoline variant of Tasks RCU enabled. [ 0.075668] Rude variant of Tasks RCU enabled. [ 0.075668] Tracing variant of Tasks RCU enabled. [ 0.075669] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.075670] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.079518] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.079777] vt handoff: transparent VT on vt#7 [ 0.079784] Console: colour dummy device 80x25 [ 0.079788] printk: console [tty0] enabled [ 0.079806] ACPI: Core revision 20200528 [ 0.080020] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.080035] APIC: Switch to symmetric I/O mode setup [ 0.080105] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.080524] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.100036] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f41023954, max_idle_ns: 440795317550 ns [ 0.100040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.53 BogoMIPS (lpj=9977060) [ 0.100042] pid_max: default: 32768 minimum: 301 [ 0.105525] LSM: Security Framework initializing [ 0.105535] Yama: becoming mindful. [ 0.105562] AppArmor: AppArmor initialized [ 0.105610] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.105623] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.105889] x86/cpu: VMX (outside TXT) disabled by BIOS [ 0.105905] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.105915] process: using mwait in idle threads [ 0.105917] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.105918] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.105922] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.105924] Spectre V2 : Mitigation: Full generic retpoline [ 0.105924] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.105925] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.105926] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.105927] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.105928] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.105931] MDS: Mitigation: Clear CPU buffers [ 0.106136] Freeing SMP alternatives memory: 40K [ 0.112132] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.112245] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.112252] ... version: 3 [ 0.112252] ... bit width: 48 [ 0.112253] ... generic registers: 4 [ 0.112254] ... value mask: 0000ffffffffffff [ 0.112254] ... max period: 00007fffffffffff [ 0.112255] ... fixed-purpose events: 3 [ 0.112255] ... event mask: 000000070000000f [ 0.112295] rcu: Hierarchical SRCU implementation. [ 0.113194] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.113289] smp: Bringing up secondary CPUs ... [ 0.113403] x86: Booting SMP configuration: [ 0.113404] .... node #0, CPUs: #1 [ 0.116151] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.116211] #2 #3 [ 0.122374] smp: Brought up 1 node, 4 CPUs [ 0.122374] smpboot: Max logical packages: 2 [ 0.122374] smpboot: Total of 4 processors activated (19954.12 BogoMIPS) [ 0.124389] devtmpfs: initialized [ 0.124389] x86/mm: Memory block size: 128MB [ 0.124806] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.124806] PM: Registering ACPI NVS region [mem 0xbcebd000-0xbcfbcfff] (1048576 bytes) [ 0.124806] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.124806] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.124806] pinctrl core: initialized pinctrl subsystem [ 0.124806] PM: RTC time: 05:05:16, date: 2020-10-25 [ 0.124806] thermal_sys: Registered thermal governor 'fair_share' [ 0.124806] thermal_sys: Registered thermal governor 'bang_bang' [ 0.124806] thermal_sys: Registered thermal governor 'step_wise' [ 0.124806] thermal_sys: Registered thermal governor 'user_space' [ 0.124806] thermal_sys: Registered thermal governor 'power_allocator' [ 0.124806] NET: Registered protocol family 16 [ 0.124806] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.124806] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.124806] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.124806] audit: initializing netlink subsys (disabled) [ 0.124806] audit: type=2000 audit(1603602315.044:1): state=initialized audit_enabled=0 res=1 [ 0.124806] EISA bus registered [ 0.124806] cpuidle: using governor ladder [ 0.124806] cpuidle: using governor menu [ 0.124806] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.124806] ACPI: bus type PCI registered [ 0.124806] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.124806] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.124806] PCI: not using MMCONFIG [ 0.124806] PCI: Using configuration type 1 for base access [ 0.124806] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.124806] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.128581] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.128581] ACPI: Added _OSI(Module Device) [ 0.128581] ACPI: Added _OSI(Processor Device) [ 0.128581] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.128581] ACPI: Added _OSI(Processor Aggregator Device) [ 0.128581] ACPI: Added _OSI(Linux-Dell-Video) [ 0.128581] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.128581] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.151006] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.152381] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.162808] ACPI: Dynamic OEM Table Load: [ 0.162815] ACPI: SSDT 0xFFFF8A1E34617800 00074D (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.164064] ACPI: Dynamic OEM Table Load: [ 0.164069] ACPI: SSDT 0xFFFF8A1E34687C00 000303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.165042] ACPI: Dynamic OEM Table Load: [ 0.165046] ACPI: SSDT 0xFFFF8A1E3468D600 000119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.166983] ACPI: EC: EC started [ 0.166984] ACPI: EC: interrupt blocked [ 1.728656] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.728659] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 1.728660] ACPI: Interpreter enabled [ 1.728685] ACPI: (supports S0 S3 S4 S5) [ 1.728686] ACPI: Using IOAPIC for interrupt routing [ 1.728715] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.729199] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 1.729216] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.729622] ACPI: Enabled 8 GPEs in block 00 to 3F [ 1.732739] ACPI: Power Resource [APPR] (off) [ 1.735301] ACPI: Power Resource [COMP] (on) [ 1.735678] ACPI: Power Resource [LPP] (on) [ 1.740544] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 1.740550] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.742099] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] [ 1.744288] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.744289] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.745061] PCI host bridge to bus 0000:00 [ 1.745063] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.745065] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.745066] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.745067] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xdfffffff window] [ 1.745068] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window] [ 1.745069] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 1.745070] pci_bus 0000:00: root bus resource [bus 00-3e] [ 1.745080] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 1.745193] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 1.745203] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit] [ 1.745208] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.745212] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 1.745229] pci 0000:00:02.0: BAR 2: assigned to efifb [ 1.745350] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 1.745376] pci 0000:00:16.0: reg 0x10: [mem 0xd4724000-0xd472400f 64bit] [ 1.745461] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.745555] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 1.745575] pci 0000:00:19.0: reg 0x10: [mem 0xd4700000-0xd471ffff] [ 1.745584] pci 0000:00:19.0: reg 0x14: [mem 0xd4729000-0xd4729fff] [ 1.745592] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f] [ 1.745662] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.745764] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 1.745785] pci 0000:00:1a.0: reg 0x10: [mem 0xd4728000-0xd47283ff] [ 1.745866] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.745974] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 1.745994] pci 0000:00:1b.0: reg 0x10: [mem 0xd4720000-0xd4723fff 64bit] [ 1.746073] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.746178] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 1.746282] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.746396] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 1.746536] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.746650] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 1.746759] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.746868] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 1.746982] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.747097] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 1.747117] pci 0000:00:1d.0: reg 0x10: [mem 0xd4727000-0xd47273ff] [ 1.747197] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.747299] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 [ 1.747511] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018a [ 1.747528] pci 0000:00:1f.2: reg 0x10: [io 0x40b8-0x40bf] [ 1.747536] pci 0000:00:1f.2: reg 0x14: [io 0x40cc-0x40cf] [ 1.747544] pci 0000:00:1f.2: reg 0x18: [io 0x40b0-0x40b7] [ 1.747552] pci 0000:00:1f.2: reg 0x1c: [io 0x40c8-0x40cb] [ 1.747559] pci 0000:00:1f.2: reg 0x20: [io 0x4090-0x409f] [ 1.747567] pci 0000:00:1f.2: reg 0x24: [io 0x4080-0x408f] [ 1.747577] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.747578] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.747579] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.747580] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.747708] pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185 [ 1.747725] pci 0000:00:1f.5: reg 0x10: [io 0x40a8-0x40af] [ 1.747733] pci 0000:00:1f.5: reg 0x14: [io 0x40c4-0x40c7] [ 1.747741] pci 0000:00:1f.5: reg 0x18: [io 0x40a0-0x40a7] [ 1.747748] pci 0000:00:1f.5: reg 0x1c: [io 0x40c0-0x40c3] [ 1.747756] pci 0000:00:1f.5: reg 0x20: [io 0x4070-0x407f] [ 1.747764] pci 0000:00:1f.5: reg 0x24: [io 0x4060-0x406f] [ 1.747936] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.747943] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff] [ 1.748070] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 1.748074] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] [ 1.748078] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 1.748212] pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010 [ 1.748262] pci 0000:23:00.0: reg 0x10: [mem 0xd4500000-0xd45007ff] [ 1.748284] pci 0000:23:00.0: reg 0x14: [mem 0xd4505000-0xd45050ff] [ 1.748647] pci 0000:23:00.1: [197b:2392] type 00 class 0x088000 [ 1.748686] pci 0000:23:00.1: reg 0x10: [mem 0xd4504000-0xd45040ff] [ 1.748763] pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref] [ 1.748990] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501 [ 1.749034] pci 0000:23:00.2: reg 0x10: [mem 0xd4503000-0xd45030ff] [ 1.749417] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 1.749423] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff] [ 1.749534] pci 0000:24:00.0: [14e4:4353] type 00 class 0x028000 [ 1.749576] pci 0000:24:00.0: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit] [ 1.749634] pci 0000:24:00.0: enabling Extended Tags [ 1.749752] pci 0000:24:00.0: supports D1 D2 [ 1.749915] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 1.749920] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff] [ 1.751306] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 1.751389] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 1.751468] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.751546] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 1.751625] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.751704] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 1.751783] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.751867] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 1.752476] ACPI: EC: interrupt unblocked [ 1.752477] ACPI: EC: event unblocked [ 1.752485] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.752486] ACPI: EC: GPE=0x16 [ 1.752489] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 1.752491] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 1.752571] iommu: Default domain type: Translated [ 1.752571] SCSI subsystem initialized [ 1.752571] libata version 3.00 loaded. [ 1.752571] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.752571] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.752571] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.752571] vgaarb: loaded [ 1.752571] ACPI: bus type USB registered [ 1.752571] usbcore: registered new interface driver usbfs [ 1.752571] usbcore: registered new interface driver hub [ 1.752571] usbcore: registered new device driver usb [ 1.752571] pps_core: LinuxPPS API ver. 1 registered [ 1.752571] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.752571] PTP clock support registered [ 1.752571] EDAC MC: Ver: 3.0.0 [ 1.752571] Registered efivars operations [ 1.752571] NetLabel: Initializing [ 1.752571] NetLabel: domain hash size = 128 [ 1.752571] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.752571] NetLabel: unlabeled traffic allowed by default [ 1.752571] PCI: Using ACPI for IRQ routing [ 1.760227] PCI: pci_cache_line_size set to 64 bytes [ 1.760319] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 1.760321] e820: reserve RAM buffer [mem 0xb718b018-0xb7ffffff] [ 1.760322] e820: reserve RAM buffer [mem 0xb7194018-0xb7ffffff] [ 1.760322] e820: reserve RAM buffer [mem 0xb9c51000-0xbbffffff] [ 1.760323] e820: reserve RAM buffer [mem 0xbc58d000-0xbfffffff] [ 1.760324] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff] [ 1.760326] e820: reserve RAM buffer [mem 0x23e000000-0x23fffffff] [ 1.760761] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.760766] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.762798] clocksource: Switched to clocksource tsc-early [ 1.775649] VFS: Disk quotas dquot_6.6.0 [ 1.775668] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.775787] AppArmor: AppArmor Filesystem Enabled [ 1.775823] pnp: PnP ACPI init [ 1.776093] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.776095] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.776096] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.776098] system 00:00: [mem 0x00000000-0x00000fff] could not be reserved [ 1.776099] system 00:00: [mem 0xbfa00000-0xbfa00fff] has been reserved [ 1.776101] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved [ 1.776102] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.776104] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.776105] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.776106] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.776113] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.776290] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 1.776383] system 00:02: [io 0x0200-0x027f] has been reserved [ 1.776385] system 00:02: [io 0x1000-0x100f] has been reserved [ 1.776386] system 00:02: [io 0xffff] has been reserved [ 1.776387] system 00:02: [io 0xffff] has been reserved [ 1.776389] system 00:02: [io 0x0400-0x047f] has been reserved [ 1.776390] system 00:02: [io 0x0500-0x057f] has been reserved [ 1.776391] system 00:02: [io 0xef80-0xef9f] has been reserved [ 1.776396] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.776422] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.776943] pnp 00:04: Plug and Play ACPI device, IDs WACf00e (active) [ 1.776967] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.776989] pnp 00:06: Plug and Play ACPI device, IDs SYN0180 SYN0100 SYN0002 PNP0f13 (active) [ 1.777683] pnp: PnP ACPI: found 7 devices [ 1.783664] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.783727] NET: Registered protocol family 2 [ 1.783904] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.783960] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.784140] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.784247] TCP: Hash tables configured (established 65536 bind 65536) [ 1.784379] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.784409] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.784470] NET: Registered protocol family 1 [ 1.784474] NET: Registered protocol family 44 [ 1.784480] pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window [ 1.784487] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000 add_align 100000 [ 1.784499] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 1.784502] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.784508] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff] [ 1.784516] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 1.784519] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] [ 1.784524] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 1.784528] pci 0000:00:1c.1: bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 1.784535] pci 0000:23:00.1: BAR 6: assigned [mem 0xd4508000-0xd450ffff pref] [ 1.784537] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 1.784541] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff] [ 1.784549] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 1.784554] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff] [ 1.784563] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.784564] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.784566] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.784567] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xdfffffff window] [ 1.784568] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window] [ 1.784569] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window] [ 1.784570] pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff] [ 1.784572] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff] [ 1.784573] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff] [ 1.784574] pci_bus 0000:02: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 1.784575] pci_bus 0000:23: resource 1 [mem 0xd4500000-0xd45fffff] [ 1.784576] pci_bus 0000:24: resource 1 [mem 0xd4400000-0xd44fffff] [ 1.784698] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.784712] pci 0000:00:1a.0: enabling device (0000 -> 0002) [ 1.785189] pci 0000:00:1d.0: enabling device (0000 -> 0002) [ 1.785634] PCI: CLS 64 bytes, default 64 [ 1.785683] Trying to unpack rootfs image as initramfs... [ 1.926327] Initramfs unpacking failed: Decoding failed [ 1.931537] Freeing initrd memory: 50408K [ 1.931551] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.931552] software IO TLB: mapped [mem 0xb2d8e000-0xb6d8e000] (64MB) [ 1.931799] check: Scanning for low memory corruption every 60 seconds [ 1.932343] Initialise system trusted keyrings [ 1.932354] Key type blacklist registered [ 1.932386] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.933816] zbud: loaded [ 1.934082] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.934245] fuse: init (API version 7.31) [ 1.934387] integrity: Platform Keyring initialized [ 1.945754] Key type asymmetric registered [ 1.945755] Asymmetric key parser 'x509' registered [ 1.945765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.945811] io scheduler mq-deadline registered [ 1.945938] pcieport 0000:00:1c.0: enabling device (0000 -> 0002) [ 1.946260] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24 [ 1.946330] pcieport 0000:00:1c.1: enabling device (0000 -> 0003) [ 1.946591] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25 [ 1.946620] pcieport 0000:00:1c.1: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.947014] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26 [ 1.947351] pcieport 0000:00:1c.3: PME: Signaling with IRQ 27 [ 1.947444] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.947503] efifb: probing for efifb [ 1.947520] efifb: No BGRT, not showing boot graphics [ 1.947521] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k [ 1.947522] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 1.947523] efifb: scrolling: redraw [ 1.947524] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.947567] fbcon: Deferring console take-over [ 1.947568] fb0: EFI VGA frame buffer device [ 1.947578] intel_idle: MWAIT substates: 0x21120 [ 1.947579] intel_idle: v0.5.1 model 0x2A [ 1.947782] intel_idle: Local APIC timer is reliable in all C-states [ 1.948067] ACPI: AC Adapter [AC] (on-line) [ 1.948129] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.948147] ACPI: Sleep Button [SLPB] [ 1.948178] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.948192] ACPI: Lid Switch [LID] [ 1.948222] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.948256] ACPI: Power Button [PWRF] [ 1.973302] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.973304] ACPI: Thermal Zone [CPUZ] (65 C) [ 1.997151] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.997153] ACPI: Thermal Zone [GFXZ] (0 C) [ 2.011970] thermal LNXTHERM:02: registered as thermal_zone2 [ 2.011972] ACPI: Thermal Zone [EXTZ] (54 C) [ 2.026901] thermal LNXTHERM:03: registered as thermal_zone3 [ 2.026902] ACPI: Thermal Zone [LOCZ] (43 C) [ 2.041829] thermal LNXTHERM:04: registered as thermal_zone4 [ 2.041831] ACPI: Thermal Zone [BATZ] (25 C) [ 2.042331] thermal LNXTHERM:05: registered as thermal_zone5 [ 2.042332] ACPI: Thermal Zone [PCHZ] (0 C) [ 2.042592] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.063386] 00:04: ttyS4 at I/O 0x280 (irq = 6, base_baud = 115200) is a 16550A [ 2.066088] Linux agpgart interface v0.103 [ 2.071261] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) [ 2.090756] battery: ACPI: Battery Slot [BAT0] (battery present) [ 2.090867] battery: ACPI: Battery Slot [BAT1] (battery absent) [ 2.141288] loop: module loaded [ 2.141525] ata_piix 0000:00:1f.2: version 2.13 [ 2.141775] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 2.301469] scsi host0: ata_piix [ 2.301732] scsi host1: ata_piix [ 2.301789] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4090 irq 14 [ 2.301794] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4098 irq 15 [ 2.302054] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 2.460171] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work [ 2.460663] scsi host2: ata_piix [ 2.460837] scsi host3: ata_piix [ 2.460887] ata3: SATA max UDMA/133 cmd 0x40a8 ctl 0x40c4 bmdma 0x4070 irq 19 [ 2.460888] ata4: SATA max UDMA/133 cmd 0x40a0 ctl 0x40c0 bmdma 0x4078 irq 19 [ 2.461111] libphy: Fixed MDIO Bus: probed [ 2.461112] tun: Universal TUN/TAP device driver, 1.6 [ 2.461246] PPP generic driver version 2.4.2 [ 2.461320] VFIO - User Level meta-driver version: 0.3 [ 2.461424] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.461430] ehci-pci: EHCI PCI platform driver [ 2.461706] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.461716] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.461729] ehci-pci 0000:00:1a.0: debug port 2 [ 2.465630] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2.465643] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4728000 [ 2.480155] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.480286] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 2.480288] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.480289] usb usb1: Product: EHCI Host Controller [ 2.480290] usb usb1: Manufacturer: Linux 5.8.0-25-generic ehci_hcd [ 2.480291] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.480539] hub 1-0:1.0: USB hub found [ 2.480548] hub 1-0:1.0: 3 ports detected [ 2.481002] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.481008] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.481019] ehci-pci 0000:00:1d.0: debug port 2 [ 2.484917] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.484923] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4727000 [ 2.500148] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.500262] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 2.500264] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.500265] usb usb2: Product: EHCI Host Controller [ 2.500266] usb usb2: Manufacturer: Linux 5.8.0-25-generic ehci_hcd [ 2.500267] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.500516] hub 2-0:1.0: USB hub found [ 2.500525] hub 2-0:1.0: 3 ports detected [ 2.500756] ehci-platform: EHCI generic platform driver [ 2.500776] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.500780] ohci-pci: OHCI PCI platform driver [ 2.500792] ohci-platform: OHCI generic platform driver [ 2.500800] uhci_hcd: USB Universal Host Controller Interface driver [ 2.500852] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.502748] i8042: Detected active multiplexing controller, rev 1.1 [ 2.503507] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.503511] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.503540] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.503559] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.503579] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.503821] mousedev: PS/2 mouse device common for all mice [ 2.503995] rtc_cmos 00:03: RTC can wake from S4 [ 2.504217] rtc_cmos 00:03: registered as rtc0 [ 2.504250] rtc_cmos 00:03: setting system clock to 2020-10-25T05:05:18 UTC (1603602318) [ 2.504271] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.504277] i2c /dev entries driver [ 2.504329] device-mapper: uevent: version 1.0.3 [ 2.504393] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com [ 2.504413] platform eisa.0: Probing EISA bus 0 [ 2.504415] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 2.504416] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.504417] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 2.504418] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 2.504419] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 2.504421] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 2.504422] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 2.504423] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 2.504424] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 2.504425] platform eisa.0: EISA: Detected 0 cards [ 2.504430] intel_pstate: Intel P-state driver initializing [ 2.504720] ledtrig-cpu: registered to indicate activity on CPUs [ 2.504722] EFI Variables Facility v0.08 2004-May-17 [ 2.528577] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.637579] drop_monitor: Initializing network drop monitor service [ 2.637735] NET: Registered protocol family 10 [ 2.643318] Segment Routing with IPv6 [ 2.643347] NET: Registered protocol family 17 [ 2.643383] Key type dns_resolver registered [ 2.643963] microcode: sig=0x206a7, pf=0x10, revision=0x2f [ 2.644031] microcode: Microcode Update Driver: v2.2. [ 2.644052] IPI shorthand broadcast: enabled [ 2.644070] sched_clock: Marking stable (2643735142, 307780)->(2661926529, -17883607) [ 2.644286] registered taskstats version 1 [ 2.644312] Loading compiled-in X.509 certificates [ 2.645449] Loaded X.509 cert 'Build time autogenerated kernel key: 7da6ae7afb3ff081f4283f71de26c4734fe6a947' [ 2.645484] zswap: loaded using pool lzo/zbud [ 2.645606] Key type ._fscrypt registered [ 2.645608] Key type .fscrypt registered [ 2.645610] Key type fscrypt-provisioning registered [ 2.645670] Key type trusted registered [ 2.648625] Key type encrypted registered [ 2.648630] AppArmor: AppArmor sha1 policy hashing enabled [ 2.659810] ima: Allocated hash algorithm: sha1 [ 2.772748] ima: No architecture policies found [ 2.772791] evm: Initialising EVM extended attributes: [ 2.772793] evm: security.selinux [ 2.772794] evm: security.SMACK64 [ 2.772796] evm: security.SMACK64EXEC [ 2.772797] evm: security.SMACK64TRANSMUTE [ 2.772798] evm: security.SMACK64MMAP [ 2.772800] evm: security.apparmor [ 2.772801] evm: security.ima [ 2.772802] evm: security.capability [ 2.772805] evm: HMAC attrs: 0x1 [ 2.773795] PM: Magic number: 8:943:62 [ 2.774350] RAS: Correctable Errors collector initialized. [ 2.816167] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.836183] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.956148] tsc: Refined TSC clocksource calibration: 2494.332 MHz [ 2.956173] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f44f92df3, max_idle_ns: 440795329494 ns [ 2.956253] clocksource: Switched to clocksource tsc [ 2.972965] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 2.972972] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.973670] hub 1-1:1.0: USB hub found [ 2.973847] hub 1-1:1.0: 6 ports detected [ 2.992581] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 2.992589] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.993282] hub 2-1:1.0: USB hub found [ 2.993561] hub 2-1:1.0: 8 ports detected [ 3.260164] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 3.280177] usb 2-1.3: new full-speed USB device number 3 using ehci-pci [ 3.340167] ata2.00: failed to resume link (SControl 30) [ 3.369874] random: fast init done [ 3.370331] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c, bcdDevice= 0.86 [ 3.370337] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3.370341] usb 1-1.1: SerialNumber: 0030ced65480 [ 3.390889] usb 2-1.3: New USB device found, idVendor=0a05, idProduct=7211, bcdDevice= 1.00 [ 3.390897] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.390901] usb 2-1.3: Product: USB2.0 HUB [ 3.391439] hub 2-1.3:1.0: USB hub found [ 3.391607] hub 2-1.3:1.0: 4 ports detected [ 3.448169] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 3.472180] usb 2-1.4: new high-speed USB device number 4 using ehci-pci [ 3.556960] usb 1-1.4: New USB device found, idVendor=04b4, idProduct=6560, bcdDevice= 0.0b [ 3.556967] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.557553] hub 1-1.4:1.0: USB hub found [ 3.557815] hub 1-1.4:1.0: 4 ports detected [ 3.629948] usb 2-1.4: New USB device found, idVendor=04f2, idProduct=b242, bcdDevice= 8.50 [ 3.629955] usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 3.629959] usb 2-1.4: Product: HP HD Webcam [Fixed] [ 3.629963] usb 2-1.4: Manufacturer: Chicony Electronics Co., Ltd. [ 3.629966] usb 2-1.4: SerialNumber: SN0001 [ 3.636132] usb 1-1.6: new high-speed USB device number 5 using ehci-pci [ 3.652148] ata1.01: failed to resume link (SControl 0) [ 3.716181] usb 2-1.6: new full-speed USB device number 5 using ehci-pci [ 3.746932] usb 1-1.6: New USB device found, idVendor=049f, idProduct=0081, bcdDevice= 2.46 [ 3.746939] usb 1-1.6: New USB device strings: Mfr=64, Product=80, SerialNumber=51 [ 3.746943] usb 1-1.6: Product: USB Multibay IDE 2.468 [ 3.746946] usb 1-1.6: Manufacturer: Hewlett Packard [ 3.746949] usb 1-1.6: SerialNumber: DBEEF0000688 [ 3.812253] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 3.812273] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3.815069] ata1.00: ATA-8: SAMSUNG SSD PM830 2.5" 7mm 128GB, CXM03D1Q, max UDMA/133 [ 3.815074] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.818005] ata1.00: configured for UDMA/133 [ 3.818427] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 3D1Q PQ: 0 ANSI: 5 [ 3.818998] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.819159] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 3.819189] sd 0:0:0:0: [sda] Write Protect is off [ 3.819194] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.819235] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.823041] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 3.824289] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.828505] usb 2-1.6: New USB device found, idVendor=03f0, idProduct=231d, bcdDevice= 3.06 [ 3.828511] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.828515] usb 2-1.6: Product: HP Integrated Module [ 3.828518] usb 2-1.6: Manufacturer: Broadcom Corp [ 4.380169] ata2.01: failed to resume link (SControl 0) [ 4.392095] ata2.00: SATA link down (SStatus 4 SControl 30) [ 4.392126] ata2.01: SATA link down (SStatus 0 SControl 0) [ 4.396544] Freeing unused decrypted memory: 2040K [ 4.397112] Freeing unused kernel image (initmem) memory: 2636K [ 4.397173] Write protecting the kernel read-only data: 26624k [ 4.397688] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 4.397972] Freeing unused kernel image (rodata/data gap) memory: 1448K [ 4.444926] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.444927] x86/mm: Checking user space page tables [ 4.490810] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.490822] Run /init as init process [ 4.490824] with arguments: [ 4.490825] /init [ 4.490826] splash [ 4.490827] with environment: [ 4.490827] HOME=/ [ 4.490828] TERM=linux [ 4.490829] BOOT_IMAGE=/boot/vmlinuz-5.8.0-25-generic [ 4.643213] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200528/utaddress-204) [ 4.643220] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.643224] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204) [ 4.643228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.643229] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204) [ 4.643233] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.643234] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204) [ 4.643237] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.643238] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.644643] usb-storage 1-1.6:1.0: USB Mass Storage device detected [ 4.644688] sdhci: Secure Digital Host Controller Interface driver [ 4.644688] sdhci: Copyright(c) Pierre Ossman [ 4.644817] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.644818] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.645214] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.646906] scsi host4: usb-storage 1-1.6:1.0 [ 4.647014] usbcore: registered new interface driver usb-storage [ 4.648439] sdhci-pci 0000:23:00.1: SDHCI controller found [197b:2392] (rev 30) [ 4.648454] sdhci-pci 0000:23:00.1: enabling device (0000 -> 0002) [ 4.648606] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 4.651090] usbcore: registered new interface driver uas [ 4.653556] mmc0: SDHCI controller on PCI [0000:23:00.1] using DMA [ 4.653588] sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30) [ 4.653697] sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface. [ 4.720138] firewire_ohci 0000:23:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 [ 4.734776] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 4.824695] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 2c:27:d7:81:69:0c [ 4.824697] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.824734] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 4.826063] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 4.963872] fbcon: Taking over console [ 4.963987] Console: switching to colour frame buffer device 128x48 [ 5.022229] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 5.228182] firewire_core 0000:23:00.0: created device fw0: GUID ffe473fffffffffe, S400 [ 5.244261] systemd[1]: Inserted module 'autofs4' [ 5.484558] systemd[1]: systemd 246.6-1ubuntu1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 5.504434] systemd[1]: Detected architecture x86-64. [ 5.522061] systemd[1]: Set hostname to <2760p-home>. [ 5.617913] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8 [ 5.683228] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-844S 1.03 PQ: 0 ANSI: 0 [ 5.690950] sr 4:0:0:0: Power-on or device reset occurred [ 5.703875] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.703877] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.704096] systemd[1]: /lib/systemd/system/dbus.service:12: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 5.716298] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 5.716361] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 5.749612] systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 5.796576] systemd[1]: Queued start job for default target Graphical Interface. [ 5.797615] systemd[1]: Created slice system-modprobe.slice. [ 5.797866] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.798038] systemd[1]: Created slice User and Session Slice. [ 5.798104] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.798289] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.798350] systemd[1]: Reached target Remote File Systems. [ 5.798364] systemd[1]: Reached target Slices. [ 5.798525] systemd[1]: Listening on Syslog Socket. [ 5.798611] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.798660] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.798831] systemd[1]: Listening on Journal Audit Socket. [ 5.798911] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.799014] systemd[1]: Listening on Journal Socket. [ 5.799149] systemd[1]: Listening on udev Control Socket. [ 5.799232] systemd[1]: Listening on udev Kernel Socket. [ 5.800101] systemd[1]: Mounting Huge Pages File System... [ 5.801056] systemd[1]: Mounting POSIX Message Queue File System... [ 5.802642] systemd[1]: Mounting Kernel Debug File System... [ 5.804185] systemd[1]: Mounting Kernel Trace File System... [ 5.806331] systemd[1]: Starting Journal Service... [ 5.808151] systemd[1]: Starting Set the console keyboard layout... [ 5.809791] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 5.811281] systemd[1]: Starting Load Kernel Module drm... [ 5.813892] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.813953] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 5.818688] systemd[1]: Starting Load Kernel Modules... [ 5.820393] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.822222] systemd[1]: Starting Coldplug All udev Devices... [ 5.826155] systemd[1]: Starting Uncomplicated firewall... [ 5.830380] systemd[1]: Mounted Huge Pages File System. [ 5.830547] systemd[1]: Mounted POSIX Message Queue File System. [ 5.830765] systemd[1]: Mounted Kernel Debug File System. [ 5.831005] systemd[1]: Mounted Kernel Trace File System. [ 5.831921] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 5.834363] systemd[1]: Finished Uncomplicated firewall. [ 5.835476] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro [ 5.835585] systemd[1]: modprobe@drm.service: Succeeded. [ 5.836542] systemd[1]: Finished Load Kernel Module drm. [ 5.838214] systemd[1]: Finished Remount Root and Kernel File Systems. [ 5.841599] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 5.841676] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 5.843623] systemd[1]: Starting Load/Save Random Seed... [ 5.851696] systemd[1]: Starting Create System Users... [ 5.931359] systemd[1]: Finished Set the console keyboard layout. [ 5.938608] systemd[1]: Finished Coldplug All udev Devices. [ 5.945808] lp: driver loaded but no devices found [ 6.120555] ppdev: user-space parallel port driver [ 6.290076] systemd[1]: Started Journal Service. [ 6.395281] psmouse serio4: synaptics: queried max coordinates: x [..5932], y [..5164] [ 6.468516] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 620079 [ 6.514167] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 [ 7.117676] hp_accel: laptop model unknown, using default axes configuration [ 7.251462] lis3lv02d: 8 bits 3DC sensor found [ 7.254687] pstore: Using crash dump compression: deflate [ 7.254696] pstore: Registered efi as persistent store backend [ 7.256445] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.260567] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.429066] wl: loading out-of-tree module taints kernel. [ 7.429071] wl: module license 'MIXED/Proprietary' taints kernel. [ 7.429072] Disabling lock debugging due to kernel taint [ 7.432146] wl: module verification failed: signature and/or required key missing - tainting kernel [ 7.437775] wl 0000:24:00.0: enabling device (0000 -> 0002) [ 7.443368] mc: Linux media interface: v0.10 [ 7.455639] videodev: Linux video capture interface: v2.00 [ 7.457478] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 7.457480] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 7.457481] RAPL PMU: hw unit of domain package 2^-16 Joules [ 7.457481] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 7.474406] cryptd: max_cpu_qlen set to 1000 [ 7.474677] input: HP WMI hotkeys as /devices/virtual/input/input12 [ 7.484805] Bluetooth: Core ver 2.22 [ 7.484822] NET: Registered protocol family 31 [ 7.484823] Bluetooth: HCI device and connection manager initialized [ 7.484827] Bluetooth: HCI socket layer initialized [ 7.484830] Bluetooth: L2CAP socket layer initialized [ 7.484833] Bluetooth: SCO socket layer initialized [ 7.546248] wlan0: Broadcom BCM4353 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) [ 7.570858] AVX version of gcm_enc/dec engaged. [ 7.570859] AES CTR mode by8 optimization enabled [ 7.599857] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b242) [ 7.601720] usbcore: registered new interface driver btusb [ 7.742742] checking generic (c0000000 300000) vs hw (d4000000 400000) [ 7.742744] checking generic (c0000000 300000) vs hw (c0000000 10000000) [ 7.742746] fb0: switching to inteldrmfb from EFI VGA [ 7.743156] Console: switching to colour dummy device 80x25 [ 7.743201] i915 0000:00:02.0: vgaarb: deactivate vga console [ 7.746319] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.758745] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.786307] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 7.820948] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0 [ 7.822994] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.828067] acpi device:0b: registered as cooling_device5 [ 7.828301] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13 [ 7.828479] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 7.853836] uvcvideo 2-1.4:1.0: Entity type for entity Extension 5 was not initialized! [ 7.853858] uvcvideo 2-1.4:1.0: Entity type for entity Extension 4 was not initialized! [ 7.853861] uvcvideo 2-1.4:1.0: Entity type for entity Processing 3 was not initialized! [ 7.853862] uvcvideo 2-1.4:1.0: Entity type for entity Camera 1 was not initialized! [ 7.853979] input: HP HD Webcam [Fixed]: HP HD Web as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input14 [ 7.854812] fbcon: i915drmfb (fb0) is primary device [ 7.854905] Console: switching to colour frame buffer device 160x50 [ 7.854931] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 7.854995] usbcore: registered new interface driver uvcvideo [ 7.854996] USB Video Class driver (1.1.1) [ 7.869483] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 7.869487] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 7.869489] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 7.869491] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 7.869492] snd_hda_codec_idt hdaudioC0D0: inputs: [ 7.869494] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xe [ 7.869496] snd_hda_codec_idt hdaudioC0D0: Mic=0xc [ 7.869497] snd_hda_codec_idt hdaudioC0D0: Line=0xf [ 7.898107] wl 0000:24:00.0 wlo1: renamed from wlan0 [ 7.933168] intel_rapl_common: Found RAPL domain package [ 7.933170] intel_rapl_common: Found RAPL domain core [ 7.933171] intel_rapl_common: Found RAPL domain uncore [ 7.933176] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 7.936870] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 7.936951] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 7.937029] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 7.937113] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 7.937197] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 8.184087] Adding 976892k swap on /dev/sda6. Priority:-2 extents:1 across:976892k SSFS [ 8.302626] audit: type=1400 audit(1603602324.291:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=677 comm="apparmor_parser" [ 8.309627] audit: type=1400 audit(1603602324.295:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=674 comm="apparmor_parser" [ 8.309631] audit: type=1400 audit(1603602324.295:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=675 comm="apparmor_parser" [ 8.309634] audit: type=1400 audit(1603602324.299:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=676 comm="apparmor_parser" [ 8.309637] audit: type=1400 audit(1603602324.299:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=676 comm="apparmor_parser" [ 8.313502] audit: type=1400 audit(1603602324.303:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=678 comm="apparmor_parser" [ 8.313507] audit: type=1400 audit(1603602324.303:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=678 comm="apparmor_parser" [ 8.313509] audit: type=1400 audit(1603602324.303:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=678 comm="apparmor_parser" [ 8.324034] audit: type=1400 audit(1603602324.311:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=684 comm="apparmor_parser" [ 8.324053] audit: type=1400 audit(1603602324.311:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=684 comm="apparmor_parser" [ 8.848374] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input20 [ 9.018751] random: avahi-daemon: uninitialized urandom read (4 bytes read) [ 9.023581] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 9.379006] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 9.511552] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.511554] Bluetooth: BNEP filters: protocol multicast [ 9.511558] Bluetooth: BNEP socket layer initialized [ 9.556412] NET: Registered protocol family 38 [ 9.624705] serio: Serial port ttyS4 [ 9.952312] input: Wacom Serial Penabled 2FG Touchscreen Pen as /devices/pnp0/00:04/tty/ttyS4/serio5/input/input21 [ 9.957605] input: Wacom Serial Penabled 2FG Touchscreen Finger as /devices/pnp0/00:04/tty/ttyS4/serio5/input/input22 [ 10.570368] urandom_read: 1 callbacks suppressed [ 10.570370] random: language-option: uninitialized urandom read (4 bytes read) [ 10.604004] random: cupsd: uninitialized urandom read (4096 bytes read) [ 10.762827] random: gdm3: uninitialized urandom read (16 bytes read) [ 11.149567] random: crng init done [ 11.712105] Bluetooth: RFCOMM TTY layer initialized [ 11.712111] Bluetooth: RFCOMM socket layer initialized [ 11.712118] Bluetooth: RFCOMM ver 1.11 [ 16.508276] rfkill: input handler disabled [ 17.584498] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 26.078544] kauditd_printk_skb: 46 callbacks suppressed [ 26.078546] audit: type=1400 audit(1603602342.067:58): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/proc/955/attr/apparmor/current" pid=955 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 30.666098] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 30.666101] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 30.666173] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 33.145595] ERROR @wl_notify_scan_status : [ 33.145598] wlo1 Scan_results error (-22) [ 6903.206467] audit: type=1400 audit(1603609219.073:59): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/proc/6012/attr/apparmor/current" pid=6012 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 8736.090950] PM: suspend entry (deep) [ 8736.126169] Filesystems sync: 0.035 seconds [ 8736.262481] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 8736.265104] OOM killer disabled. [ 8736.265106] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8736.266661] printk: Suspending console(s) (use no_console_suspend to debug) [ 8736.315253] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8736.316952] sd 0:0:0:0: [sda] Stopping disk [ 8736.359556] serial 00:04: disabled [ 8736.427446] e1000e: EEE TX LPI TIMER: 00000011 [ 8736.659601] ACPI: EC: interrupt blocked [ 8736.679302] ACPI: Preparing to enter system sleep state S3 [ 8736.680269] ACPI: EC: event blocked [ 8736.680270] ACPI: EC: EC stopped [ 8736.680270] PM: Saving platform NVS memory [ 8736.680279] Disabling non-boot CPUs ... [ 8736.680553] IRQ 30: no longer affine to CPU1 [ 8736.681752] smpboot: CPU 1 is now offline [ 8736.685024] IRQ 19: no longer affine to CPU2 [ 8736.686689] smpboot: CPU 2 is now offline [ 8736.693776] IRQ 27: no longer affine to CPU3 [ 8736.694815] smpboot: CPU 3 is now offline [ 8736.702867] ACPI: Low-level resume complete [ 8736.702917] ACPI: EC: EC started [ 8736.702918] PM: Restoring platform NVS memory [ 8736.704165] Enabling non-boot CPUs ... [ 8736.704212] x86: Booting SMP configuration: [ 8736.704213] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 8736.706560] smpboot: Scheduler frequency invariance went wobbly, disabling! [ 8736.707510] CPU1 is up [ 8736.707543] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 8736.711028] CPU2 is up [ 8736.711104] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 8736.714465] CPU3 is up [ 8736.718242] ACPI: Waking up from system sleep state S3 [ 8736.868428] ACPI: EC: interrupt unblocked [ 8736.926009] ACPI: EC: event unblocked [ 8736.929305] sd 0:0:0:0: [sda] Starting disk [ 8736.934819] ERROR @wl_wowl_ind_wake_reason : [ 8736.934823] Unable to get wake reason, err = -95 [ 8737.172785] usb 2-1.4: reset high-speed USB device number 4 using ehci-pci [ 8737.284812] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci [ 8737.360843] usb 2-1.6: reset full-speed USB device number 5 using ehci-pci [ 8737.524897] firewire_core 0000:23:00.0: rediscovered device fw0 [ 8737.968803] ata2.00: failed to resume link (SControl 30) [ 8738.284812] ata1.01: failed to resume link (SControl 0) [ 8738.444893] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 8738.444914] ata1.01: SATA link down (SStatus 0 SControl 0) [ 8738.447482] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 8738.447488] ata1.00: ACPI cmd ef/03:41:00:00:00:a0 (SET FEATURES) filtered out [ 8738.450569] ata1.00: configured for UDMA/133 [ 8738.666199] tpm tpm0: tpm_try_transmit: send(): error -5 [ 8738.668470] serial 00:04: activated [ 8738.699219] acpi LNXPOWER:02: Turning OFF [ 8738.699279] acpi LNXPOWER:01: Turning OFF [ 8738.699301] OOM killer enabled. [ 8738.699301] Restarting tasks ... [ 8738.699507] acpi PNP0501:00: Still not present [ 8738.734089] done. [ 8738.791253] usb 2-1.8: new full-speed USB device number 6 using ehci-pci [ 8738.909314] usb 2-1.8: New USB device found, idVendor=058f, idProduct=9540, bcdDevice= 1.20 [ 8738.909316] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8738.909318] usb 2-1.8: Product: EMV Smartcard Reader [ 8738.909319] usb 2-1.8: Manufacturer: Generic [ 8738.921475] video LNXVIDEO:01: Restoring backlight state [ 8738.921865] PM: suspend exit [ 8739.012697] ata2.01: failed to resume link (SControl 0) [ 8739.023718] ata2.00: SATA link down (SStatus 4 SControl 30) [ 8739.023731] ata2.01: SATA link down (SStatus 0 SControl 0) [ 8739.134492] acpi PNP0501:00: Still not present [ 8739.135730] acpi PNP0501:00: Still not present [ 8739.365010] serio: Serial port ttyS4 [ 8739.524225] e1000e 0000:00:19.0 enp0s25: NIC Link is Down [ 8740.083511] psmouse serio4: synaptics: queried max coordinates: x [..5932], y [..5164] [ 8740.483775] input: Wacom Serial Penabled 2FG Touchscreen Pen as /devices/pnp0/00:04/tty/ttyS4/serio6/input/input27 [ 8740.483957] input: Wacom Serial Penabled 2FG Touchscreen Finger as /devices/pnp0/00:04/tty/ttyS4/serio6/input/input28 [ 8747.701741] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 8760.421633] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 8760.421640] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 8760.421726] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 8762.660516] ERROR @wl_notify_scan_status : [ 8762.660523] wlo1 Scan_results error (-22) [ 9653.463182] rfkill: input handler enabled [ 9657.558579] rfkill: input handler disabled [ 9758.960006] PM: suspend entry (deep) [ 9758.995114] Filesystems sync: 0.035 seconds [ 9759.131191] Freezing user space processes ... (elapsed 0.100 seconds) done. [ 9759.231405] OOM killer disabled. [ 9759.231407] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9759.232958] printk: Suspending console(s) (use no_console_suspend to debug) [ 9759.284077] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 9759.285588] sd 0:0:0:0: [sda] Stopping disk [ 9759.321847] serial 00:04: disabled [ 9759.389425] e1000e: EEE TX LPI TIMER: 00000011 [ 9759.628840] ACPI: EC: interrupt blocked [ 9759.648687] ACPI: Preparing to enter system sleep state S3 [ 9759.650963] ACPI: EC: event blocked [ 9759.650965] ACPI: EC: EC stopped [ 9759.650966] PM: Saving platform NVS memory [ 9759.650986] Disabling non-boot CPUs ... [ 9759.651785] IRQ 30: no longer affine to CPU1 [ 9759.652812] smpboot: CPU 1 is now offline [ 9759.659298] IRQ 19: no longer affine to CPU2 [ 9759.660961] smpboot: CPU 2 is now offline [ 9759.668108] smpboot: CPU 3 is now offline [ 9759.675238] ACPI: Low-level resume complete [ 9759.675289] ACPI: EC: EC started [ 9759.675290] PM: Restoring platform NVS memory [ 9759.676481] Enabling non-boot CPUs ... [ 9759.676529] x86: Booting SMP configuration: [ 9759.676530] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 9759.679719] CPU1 is up [ 9759.679791] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 9759.683258] CPU2 is up [ 9759.683332] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 9759.686668] CPU3 is up [ 9759.690441] ACPI: Waking up from system sleep state S3 [ 9759.845081] ACPI: EC: interrupt unblocked [ 9759.902463] ACPI: EC: event unblocked [ 9759.905083] sd 0:0:0:0: [sda] Starting disk [ 9759.911183] ERROR @wl_wowl_ind_wake_reason : [ 9759.911185] Unable to get wake reason, err = -95 [ 9760.149660] usb 2-1.8: reset full-speed USB device number 6 using ehci-pci [ 9760.261616] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci [ 9760.337643] usb 2-1.6: reset full-speed USB device number 5 using ehci-pci [ 9760.493664] firewire_core 0000:23:00.0: rediscovered device fw0 [ 9760.525533] usb 2-1.4: reset high-speed USB device number 4 using ehci-pci [ 9760.949569] ata2.00: failed to resume link (SControl 30) [ 9761.257537] ata1.01: failed to resume link (SControl 0) [ 9761.417614] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 9761.417635] ata1.01: SATA link down (SStatus 0 SControl 0) [ 9761.420203] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 9761.420209] ata1.00: ACPI cmd ef/03:41:00:00:00:a0 (SET FEATURES) filtered out [ 9761.423093] ata1.00: configured for UDMA/133 [ 9761.642848] tpm tpm0: tpm_try_transmit: send(): error -5 [ 9761.645117] serial 00:04: activated [ 9761.675400] acpi LNXPOWER:02: Turning OFF [ 9761.675461] acpi LNXPOWER:01: Turning OFF [ 9761.675484] OOM killer enabled. [ 9761.675485] Restarting tasks ... [ 9761.675645] acpi PNP0501:00: Still not present [ 9761.683598] done. [ 9761.866725] video LNXVIDEO:01: Restoring backlight state [ 9761.867895] PM: suspend exit [ 9761.989389] ata2.01: failed to resume link (SControl 0) [ 9762.000571] ata2.00: SATA link down (SStatus 4 SControl 30) [ 9762.000589] ata2.01: SATA link down (SStatus 0 SControl 0) [ 9762.033944] e1000e 0000:00:19.0 enp0s25: NIC Link is Down [ 9762.072638] acpi PNP0501:00: Still not present [ 9762.074884] acpi PNP0501:00: Still not present [ 9762.312967] serio: Serial port ttyS4 [ 9763.060545] psmouse serio4: synaptics: queried max coordinates: x [..5932], y [..5164] [ 9763.484694] input: Wacom Serial Penabled 2FG Touchscreen Pen as /devices/pnp0/00:04/tty/ttyS4/serio7/input/input33 [ 9763.485096] input: Wacom Serial Penabled 2FG Touchscreen Finger as /devices/pnp0/00:04/tty/ttyS4/serio7/input/input34 [ 9769.074941] rfkill: input handler enabled [ 9769.993303] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 9782.957918] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 9782.957920] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 9782.958100] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 9784.951399] ERROR @wl_notify_scan_status : [ 9784.951401] wlo1 Scan_results error (-22) [ 9946.934296] PM: suspend entry (deep) [ 9946.969903] Filesystems sync: 0.035 seconds [ 9947.110094] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 9947.113522] OOM killer disabled. [ 9947.113524] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9947.115054] printk: Suspending console(s) (use no_console_suspend to debug) [ 9947.177390] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 9947.178895] sd 0:0:0:0: [sda] Stopping disk [ 9947.203767] serial 00:04: disabled [ 9947.270804] e1000e: EEE TX LPI TIMER: 00000011 [ 9947.702179] ACPI: EC: interrupt blocked [ 9947.721784] ACPI: Preparing to enter system sleep state S3 [ 9947.724022] ACPI: EC: event blocked [ 9947.724023] ACPI: EC: EC stopped [ 9947.724025] PM: Saving platform NVS memory [ 9947.724044] Disabling non-boot CPUs ... [ 9947.724778] IRQ 30: no longer affine to CPU1 [ 9947.725816] smpboot: CPU 1 is now offline [ 9947.731616] IRQ 19: no longer affine to CPU2 [ 9947.732653] smpboot: CPU 2 is now offline [ 9947.739113] smpboot: CPU 3 is now offline [ 9947.745130] ACPI: Low-level resume complete [ 9947.745182] ACPI: EC: EC started [ 9947.745183] PM: Restoring platform NVS memory [ 9947.746393] Enabling non-boot CPUs ... [ 9947.746440] x86: Booting SMP configuration: [ 9947.746441] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 9947.749667] CPU1 is up [ 9947.749738] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 9947.753219] CPU2 is up [ 9947.753295] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 9947.756692] CPU3 is up [ 9947.760445] ACPI: Waking up from system sleep state S3 [ 9947.900581] ACPI: EC: interrupt unblocked [ 9947.960099] ACPI: EC: event unblocked [ 9947.962756] sd 0:0:0:0: [sda] Starting disk [ 9947.968989] ERROR @wl_wowl_ind_wake_reason : [ 9947.968994] Unable to get wake reason, err = -95 [ 9948.210958] usb 2-1.4: reset high-speed USB device number 4 using ehci-pci [ 9948.330962] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci [ 9948.399001] usb 2-1.6: reset full-speed USB device number 5 using ehci-pci [ 9948.530987] firewire_core 0000:23:00.0: rediscovered device fw0 [ 9948.586937] usb 2-1.8: reset full-speed USB device number 6 using ehci-pci [ 9949.006932] ata2.00: failed to resume link (SControl 30) [ 9949.314886] ata1.01: failed to resume link (SControl 0) [ 9949.474981] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 9949.475002] ata1.01: SATA link down (SStatus 0 SControl 0) [ 9949.477575] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 9949.477581] ata1.00: ACPI cmd ef/03:41:00:00:00:a0 (SET FEATURES) filtered out [ 9949.480485] ata1.00: configured for UDMA/133 [ 9949.720216] tpm tpm0: tpm_try_transmit: send(): error -5 [ 9949.722480] serial 00:04: activated [ 9949.753164] acpi LNXPOWER:02: Turning OFF [ 9949.753224] acpi LNXPOWER:01: Turning OFF [ 9949.753246] OOM killer enabled. [ 9949.753246] Restarting tasks ... [ 9949.753471] acpi PNP0501:00: Still not present [ 9949.762664] done. [ 9949.962928] video LNXVIDEO:01: Restoring backlight state [ 9949.963293] PM: suspend exit [ 9950.050910] ata2.01: failed to resume link (SControl 0) [ 9950.062316] ata2.00: SATA link down (SStatus 4 SControl 30) [ 9950.062339] ata2.01: SATA link down (SStatus 0 SControl 0) [ 9950.127514] e1000e 0000:00:19.0 enp0s25: NIC Link is Down [ 9950.165671] acpi PNP0501:00: Still not present [ 9950.167442] acpi PNP0501:00: Still not present [ 9950.415920] serio: Serial port ttyS4 [ 9951.133994] psmouse serio4: synaptics: queried max coordinates: x [..5932], y [..5164] [ 9951.601227] input: Wacom Serial Penabled 2FG Touchscreen Pen as /devices/pnp0/00:04/tty/ttyS4/serio8/input/input39 [ 9951.602520] input: Wacom Serial Penabled 2FG Touchscreen Finger as /devices/pnp0/00:04/tty/ttyS4/serio8/input/input40 [ 9958.010875] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 9970.986506] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 9970.986513] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 9970.986584] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 9972.800858] ERROR @wl_notify_scan_status : [ 9972.800860] wlo1 Scan_results error (-22) [10012.765855] rfkill: input handler disabled [10158.250392] rfkill: input handler enabled [10162.247457] rfkill: input handler disabled [10164.218442] e1000e 0000:00:19.0 enp0s25: NIC Link is Down [10173.745485] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [11447.451152] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 10 Mbps Half Duplex, Flow Control: None [11447.451158] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [11449.356673] ERROR @wl_notify_scan_status : [11449.356678] wlo1 Scan_results error (-22) [11590.103841] e1000e 0000:00:19.0 enp0s25: NIC Link is Down [11599.879879] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready