[ 0.000000] Linux version 5.0.0-29-generic (buildd@lgw01-amd64-039) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #31~18.04.1-Ubuntu SMP Thu Sep 12 18:29:21 UTC 2019 (Ubuntu 5.0.0-29.31~18.04.1-generic 5.0.21) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-29-generic root=UUID=dfa66545-9ac3-41fa-817b-433d8a61bd78 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x207/0x2c0 with crng_init=0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfdeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfdf0000-0x00000000bfdf2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfdf3000-0x00000000bfdfffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3 6.0/GA-78LMT-USB3 6.0, BIOS F2 11/25/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4000.050 MHz processor [ 0.007321] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.007322] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.015681] AGP: No AGP bridge found [ 0.015757] last_pfn = 0x43f000 max_arch_pfn = 0x400000000 [ 0.015761] MTRR default type: uncachable [ 0.015762] MTRR fixed ranges enabled: [ 0.015763] 00000-9FFFF write-back [ 0.015764] A0000-BFFFF uncachable [ 0.015764] C0000-C7FFF write-protect [ 0.015765] C8000-FFFFF uncachable [ 0.015766] MTRR variable ranges enabled: [ 0.015767] 0 base 000000000000 mask FFFF80000000 write-back [ 0.015768] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.015769] 2 base 0000BFE00000 mask FFFFFFE00000 uncachable [ 0.015770] 3 disabled [ 0.015770] 4 disabled [ 0.015771] 5 disabled [ 0.015771] 6 disabled [ 0.015771] 7 disabled [ 0.015772] TOM2: 000000043f000000 aka 17392M [ 0.017281] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.017357] total RAM covered: 3070M [ 0.017853] Found optimal setting for mtrr clean up [ 0.017854] gran_size: 64K chunk_size: 4M num_reg: 3 lose cover RAM: 0G [ 0.018431] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved [ 0.018435] last_pfn = 0xbfdf0 max_arch_pfn = 0x400000000 [ 0.020849] found SMP MP-table at [mem 0x000f5ed0-0x000f5edf] [ 0.027858] check: Scanning 1 areas for low memory corruption [ 0.027861] Using GB pages for direct mapping [ 0.027863] BRK [0x421a01000, 0x421a01fff] PGTABLE [ 0.027865] BRK [0x421a02000, 0x421a02fff] PGTABLE [ 0.027866] BRK [0x421a03000, 0x421a03fff] PGTABLE [ 0.027889] BRK [0x421a04000, 0x421a04fff] PGTABLE [ 0.027890] BRK [0x421a05000, 0x421a05fff] PGTABLE [ 0.027952] BRK [0x421a06000, 0x421a06fff] PGTABLE [ 0.027967] BRK [0x421a07000, 0x421a07fff] PGTABLE [ 0.027984] RAMDISK: [mem 0x3333b000-0x35994fff] [ 0.027993] ACPI: Early table checksum verification disabled [ 0.028535] ACPI: RSDP 0x00000000000F78E0 000014 (v00 GBT ) [ 0.028538] ACPI: RSDT 0x00000000BFDF3000 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.028542] ACPI: FACP 0x00000000BFDF3080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.028548] ACPI: DSDT 0x00000000BFDF3100 00683B (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.028550] ACPI: FACS 0x00000000BFDF0000 000040 [ 0.028552] ACPI: MSDM 0x00000000BFDF9A00 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.028555] ACPI: HPET 0x00000000BFDF9A80 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.028558] ACPI: MCFG 0x00000000BFDF9AC0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.028560] ACPI: TAMG 0x00000000BFDF9B00 000022 (v01 GBT GBT B0 5455312E BG?? 00000101) [ 0.028563] ACPI: APIC 0x00000000BFDF9940 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.028565] ACPI: SSDT 0x00000000BFDF9BA0 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.028573] ACPI: Local APIC address 0xfee00000 [ 0.028692] No NUMA configuration found [ 0.028693] Faking a node at [mem 0x0000000000000000-0x000000043effffff] [ 0.028701] NODE_DATA(0) allocated [mem 0x43efd5000-0x43effffff] [ 0.028942] Zone ranges: [ 0.028943] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.028944] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.028945] Normal [mem 0x0000000100000000-0x000000043effffff] [ 0.028946] Device empty [ 0.028947] Movable zone start for each node [ 0.028949] Early memory node ranges [ 0.028950] node 0: [mem 0x0000000000001000-0x0000000000097fff] [ 0.028951] node 0: [mem 0x0000000000100000-0x00000000bfdeffff] [ 0.028952] node 0: [mem 0x0000000100000000-0x000000043effffff] [ 0.028963] Zeroed struct page in unavailable ranges: 633 pages [ 0.028964] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff] [ 0.028965] On node 0 totalpages: 4189575 [ 0.028966] DMA zone: 64 pages used for memmap [ 0.028967] DMA zone: 21 pages reserved [ 0.028967] DMA zone: 3991 pages, LIFO batch:0 [ 0.029052] DMA32 zone: 12216 pages used for memmap [ 0.029053] DMA32 zone: 781808 pages, LIFO batch:63 [ 0.046384] Normal zone: 53184 pages used for memmap [ 0.046387] Normal zone: 3403776 pages, LIFO batch:63 [ 0.118200] ACPI: PM-Timer IO Port: 0x4008 [ 0.118204] ACPI: Local APIC address 0xfee00000 [ 0.118213] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.118214] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.118214] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.118215] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.118215] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.118216] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.118217] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.118217] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.118229] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.118231] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.118232] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.118234] ACPI: IRQ0 used by override. [ 0.118235] ACPI: IRQ9 used by override. [ 0.118236] Using ACPI (MADT) for SMP configuration information [ 0.118238] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.118243] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.118255] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.118256] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff] [ 0.118257] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.118257] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.118258] PM: Registered nosave memory: [mem 0xbfdf0000-0xbfdf2fff] [ 0.118259] PM: Registered nosave memory: [mem 0xbfdf3000-0xbfdfffff] [ 0.118259] PM: Registered nosave memory: [mem 0xbfe00000-0xbfefffff] [ 0.118260] PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff] [ 0.118261] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.118261] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.118261] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.118263] [mem 0xbff00000-0xdfffffff] available for PCI devices [ 0.118264] Booting paravirtualized kernel on bare hardware [ 0.118267] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.118276] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.118921] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u262144 [ 0.118926] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.118927] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.118950] Built 1 zonelists, mobility grouping on. Total pages: 4124090 [ 0.118950] Policy zone: Normal [ 0.118952] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-29-generic root=UUID=dfa66545-9ac3-41fa-817b-433d8a61bd78 ro quiet splash vt.handoff=1 [ 0.130749] AGP: Checking aperture... [ 0.139107] AGP: No AGP bridge found [ 0.139110] AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB) [ 0.139111] Aperture pointing to e820 RAM. Ignoring. [ 0.139111] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.139112] AGP: Please enable the IOMMU option in the BIOS setup [ 0.139112] AGP: This costs you 64MB of RAM [ 0.139114] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) [ 0.139116] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.218915] Memory: 16290628K/16758300K available (14339K kernel code, 2335K rwdata, 4316K rodata, 2584K init, 5196K bss, 467672K reserved, 0K cma-reserved) [ 0.219061] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.219070] ftrace: allocating 41591 entries in 163 pages [ 0.237889] rcu: Hierarchical RCU implementation. [ 0.237890] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.237891] Tasks RCU enabled. [ 0.237892] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.237893] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.240512] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.240816] spurious 8259A interrupt: IRQ7. [ 0.240827] vt handoff: transparent VT on vt#1 [ 0.240832] Console: colour dummy device 80x25 [ 0.240836] printk: console [tty0] enabled [ 0.240855] ACPI: Core revision 20181213 [ 0.241012] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.241026] hpet clockevent registered [ 0.241029] APIC: Switch to symmetric I/O mode setup [ 0.241634] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.261029] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a88baf1eb, max_idle_ns: 440795355316 ns [ 0.261040] Calibrating delay loop (skipped), value calculated using timer frequency.. 8000.10 BogoMIPS (lpj=16000200) [ 0.261042] pid_max: default: 32768 minimum: 301 [ 0.261074] LSM: Security Framework initializing [ 0.261085] Yama: becoming mindful. [ 0.261106] AppArmor: AppArmor initialized [ 0.265903] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.268304] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.268404] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.268479] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.268736] LVT offset 1 assigned for vector 0xf9 [ 0.268740] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.268741] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.268742] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.268743] Spectre V2 : Mitigation: Full AMD retpoline [ 0.268744] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.268751] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.268752] Spectre V2 : User space: Vulnerable [ 0.268753] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.268920] Freeing SMP alternatives memory: 36K [ 0.277031] APIC calibration not consistent with PM-Timer: 97ms instead of 100ms [ 0.277031] APIC delta adjusted to PM-Timer: 1250004 (1223737) [ 0.277031] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0) [ 0.277031] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.277031] ... version: 0 [ 0.277031] ... bit width: 48 [ 0.277031] ... generic registers: 6 [ 0.277031] ... value mask: 0000ffffffffffff [ 0.277031] ... max period: 00007fffffffffff [ 0.277031] ... fixed-purpose events: 0 [ 0.277031] ... event mask: 000000000000003f [ 0.277031] rcu: Hierarchical SRCU implementation. [ 0.277031] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.277031] smp: Bringing up secondary CPUs ... [ 0.277031] x86: Booting SMP configuration: [ 0.277031] .... node #0, CPUs: #1 [ 0.004237] do_IRQ: 1.55 No irq handler for vector [ 0.289135] #2 [ 0.004237] do_IRQ: 2.55 No irq handler for vector [ 0.291908] #3 [ 0.004237] do_IRQ: 3.55 No irq handler for vector [ 0.305134] #4 [ 0.004237] do_IRQ: 4.55 No irq handler for vector [ 0.309135] #5 [ 0.004237] do_IRQ: 5.55 No irq handler for vector [ 0.325132] #6 [ 0.004237] do_IRQ: 6.55 No irq handler for vector [ 0.327755] #7 [ 0.004237] do_IRQ: 7.55 No irq handler for vector [ 0.329075] smp: Brought up 1 node, 8 CPUs [ 0.329075] smpboot: Max logical packages: 1 [ 0.329075] smpboot: Total of 8 processors activated (64000.80 BogoMIPS) [ 0.337131] devtmpfs: initialized [ 0.337131] x86/mm: Memory block size: 128MB [ 0.338435] PM: Registering ACPI NVS region [mem 0xbfdf0000-0xbfdf2fff] (12288 bytes) [ 0.338435] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.338435] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.338435] pinctrl core: initialized pinctrl subsystem [ 0.338435] RTC time: 21:58:46, date: 2019-09-23 [ 0.338435] NET: Registered protocol family 16 [ 0.338435] audit: initializing netlink subsys (disabled) [ 0.338435] audit: type=2000 audit(1569275924.096:1): state=initialized audit_enabled=0 res=1 [ 0.338435] EISA bus registered [ 0.338435] cpuidle: using governor ladder [ 0.338435] cpuidle: using governor menu [ 0.338435] ACPI: bus type PCI registered [ 0.338435] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.338435] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.338435] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.338435] PCI: Using configuration type 1 for base access [ 0.341092] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.341092] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.341135] ACPI: Added _OSI(Module Device) [ 0.341136] ACPI: Added _OSI(Processor Device) [ 0.341137] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.341137] ACPI: Added _OSI(Processor Aggregator Device) [ 0.341138] ACPI: Added _OSI(Linux-Dell-Video) [ 0.341139] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.341140] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.346455] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.346724] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-440) [ 0.346730] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-440) [ 0.346735] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-440) [ 0.346739] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-440) [ 0.346749] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-440) [ 0.346754] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-440) [ 0.346758] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-440) [ 0.346762] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-440) [ 0.346772] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-440) [ 0.346776] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-440) [ 0.346779] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-440) [ 0.346783] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-440) [ 0.346793] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-440) [ 0.346797] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-440) [ 0.346801] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-440) [ 0.346805] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-440) [ 0.346814] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-440) [ 0.346818] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-440) [ 0.346822] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-440) [ 0.346826] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-440) [ 0.346836] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-440) [ 0.346840] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-440) [ 0.346844] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-440) [ 0.346847] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-440) [ 0.346857] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-440) [ 0.346861] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-440) [ 0.346865] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-440) [ 0.346869] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-440) [ 0.346878] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-440) [ 0.346882] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-440) [ 0.346886] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-440) [ 0.346890] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-440) [ 0.346899] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-440) [ 0.346903] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-440) [ 0.346907] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-440) [ 0.346911] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-440) [ 0.346921] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20181213/dspkginit-440) [ 0.346925] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20181213/dspkginit-440) [ 0.346928] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20181213/dspkginit-440) [ 0.346932] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20181213/dspkginit-440) [ 0.346932] ACPI: Interpreter enabled [ 0.346932] ACPI: (supports S0 S3 S4 S5) [ 0.346932] ACPI: Using IOAPIC for interrupt routing [ 0.346932] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.346932] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.357275] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.357279] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.357566] PCI host bridge to bus 0000:00 [ 0.357568] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.357569] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.357570] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.357571] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.357572] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.357574] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.357582] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 [ 0.357594] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 0.357691] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.357708] pci 0000:00:02.0: enabling Extended Tags [ 0.357731] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.357816] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400 [ 0.357832] pci 0000:00:04.0: enabling Extended Tags [ 0.357853] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.357935] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 [ 0.357951] pci 0000:00:06.0: enabling Extended Tags [ 0.357972] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.358069] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.358089] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 0.358097] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.358106] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.358114] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.358122] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.358130] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff] [ 0.358247] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.358264] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff] [ 0.358392] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.358409] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff] [ 0.358541] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.358561] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff] [ 0.358638] pci 0000:00:12.2: supports D1 D2 [ 0.358639] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.358730] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.358746] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff] [ 0.358874] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.358891] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff] [ 0.359022] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.359041] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff] [ 0.359117] pci 0000:00:13.2: supports D1 D2 [ 0.359117] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.359208] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.359366] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.359384] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.359393] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.359401] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.359409] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.359417] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f] [ 0.359435] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.359436] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.359437] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.359438] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.359535] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.359558] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.359621] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.359702] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.359847] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.359958] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.359975] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff] [ 0.360107] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.360182] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.360255] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.360327] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.360403] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.360474] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.360588] pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000 [ 0.360607] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff] [ 0.360617] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.360626] pci 0000:01:00.0: reg 0x1c: [mem 0xde000000-0xdfffffff 64bit pref] [ 0.360633] pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f] [ 0.360640] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.360717] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8 GT/s x16 link) [ 0.360753] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300 [ 0.360768] pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff] [ 0.360906] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.360908] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.360910] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.360913] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.360944] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.360959] pci 0000:02:00.0: reg 0x10: [mem 0xfdaff000-0xfdafffff 64bit] [ 0.361016] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.361078] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.361081] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.361083] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.361085] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.361120] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.361141] pci 0000:03:00.0: reg 0x10: [io 0xce00-0xceff] [ 0.361160] pci 0000:03:00.0: reg 0x18: [mem 0xfdeff000-0xfdefffff 64bit] [ 0.361172] pci 0000:03:00.0: reg 0x20: [mem 0xfddfc000-0xfddfffff 64bit pref] [ 0.361244] pci 0000:03:00.0: supports D1 D2 [ 0.361245] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.361328] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.361331] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] [ 0.361333] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.361335] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.361345] pci_bus 0000:04: extended config space not accessible [ 0.361404] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.361407] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.361410] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.361413] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.361415] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.361416] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.361417] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.361418] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.361419] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 0.361697] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.361754] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.361810] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.361865] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.361920] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.361974] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.362028] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.362082] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.362772] SCSI subsystem initialized [ 0.362776] libata version 3.00 loaded. [ 0.362776] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.362776] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.362776] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.362776] vgaarb: loaded [ 0.362776] ACPI: bus type USB registered [ 0.362776] usbcore: registered new interface driver usbfs [ 0.362776] usbcore: registered new interface driver hub [ 0.362776] usbcore: registered new device driver usb [ 0.362776] pps_core: LinuxPPS API ver. 1 registered [ 0.362776] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.362776] PTP clock support registered [ 0.362776] EDAC MC: Ver: 3.0.0 [ 0.362776] PCI: Using ACPI for IRQ routing [ 0.371790] PCI: pci_cache_line_size set to 64 bytes [ 0.371838] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff] [ 0.371839] e820: reserve RAM buffer [mem 0xbfdf0000-0xbfffffff] [ 0.371840] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff] [ 0.371929] NetLabel: Initializing [ 0.371930] NetLabel: domain hash size = 128 [ 0.371930] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.371942] NetLabel: unlabeled traffic allowed by default [ 0.371956] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.371956] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.374094] clocksource: Switched to clocksource tsc-early [ 0.386176] VFS: Disk quotas dquot_6.6.0 [ 0.386191] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.386318] AppArmor: AppArmor Filesystem Enabled [ 0.386341] pnp: PnP ACPI init [ 0.386442] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.386443] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.386445] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.386449] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.386742] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.386765] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.386767] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.386768] system 00:01: [io 0x040b] has been reserved [ 0.386769] system 00:01: [io 0x04d6] has been reserved [ 0.386770] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.386771] system 00:01: [io 0x0c14] has been reserved [ 0.386772] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.386773] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.386774] system 00:01: [io 0x0c6f] has been reserved [ 0.386777] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.386779] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.386780] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.386781] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.386782] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.386783] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.386784] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.386785] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.386787] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.386790] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.386964] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.387323] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.387584] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.387752] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.387755] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.387990] system 00:06: [mem 0x000d5e00-0x000d7fff] has been reserved [ 0.387992] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.387993] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.387994] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.387995] system 00:06: [mem 0xbfdf0000-0xbfdfffff] could not be reserved [ 0.387997] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved [ 0.387998] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.387999] system 00:06: [mem 0x00100000-0xbfdeffff] could not be reserved [ 0.388000] system 00:06: [mem 0xbfe00000-0xbfefffff] has been reserved [ 0.388001] system 00:06: [mem 0xbff00000-0xbfffffff] could not be reserved [ 0.388003] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.388004] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.388005] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.388008] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.388028] pnp: PnP ACPI: found 7 devices [ 0.394090] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.394112] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref] [ 0.394114] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.394115] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.394117] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.394119] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.394121] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.394123] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.394124] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.394126] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.394128] pci 0000:00:06.0: PCI bridge to [bus 03] [ 0.394130] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] [ 0.394131] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.394133] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.394136] pci 0000:00:14.4: PCI bridge to [bus 04] [ 0.394138] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.394142] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.394144] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.394150] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.394151] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.394152] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.394153] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.394154] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.394155] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.394156] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] [ 0.394157] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.394158] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.394159] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.394160] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.394161] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.394162] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.394163] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.394164] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.394165] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.394165] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref] [ 0.394166] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.394167] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.394168] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.394169] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.394170] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.394231] NET: Registered protocol family 2 [ 0.394416] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.394469] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.394672] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.395065] TCP: Hash tables configured (established 131072 bind 65536) [ 0.395175] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.395268] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.395417] NET: Registered protocol family 1 [ 0.395422] NET: Registered protocol family 44 [ 0.418834] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6a0 took 22844 usecs [ 0.438828] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x6a0 took 19518 usecs [ 0.458824] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6a0 took 19343 usecs [ 0.478825] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x6a0 took 19525 usecs [ 0.498824] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6a0 took 19336 usecs [ 0.498849] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.498862] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 0.499042] PCI: CLS 64 bytes, default 64 [ 0.499090] Unpacking initramfs... [ 0.952226] Freeing initrd memory: 39272K [ 0.952742] PCI-DMA: Disabling AGP. [ 0.952798] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 0.952798] PCI-DMA: using GART IOMMU. [ 0.952800] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.955327] amd_uncore: AMD NB counters detected [ 0.955475] LVT offset 0 assigned for vector 0x400 [ 0.955532] perf: AMD IBS detected (0x000000ff) [ 0.955581] check: Scanning for low memory corruption every 60 seconds [ 0.957086] Initialise system trusted keyrings [ 0.957095] Key type blacklist registered [ 0.957140] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.958560] zbud: loaded [ 0.958966] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.959162] fuse init (API version 7.28) [ 0.988738] Key type asymmetric registered [ 0.988739] Asymmetric key parser 'x509' registered [ 0.988747] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.988790] io scheduler mq-deadline registered [ 0.989269] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.989318] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 0.989318] vesafb: scrolling: redraw [ 0.989320] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.989329] vesafb: framebuffer at 0xdf000000, mapped to 0x(____ptrval____), using 1216k, total 1216k [ 0.989408] Console: switching to colour frame buffer device 80x30 [ 0.989417] fb0: VESA VGA frame buffer device [ 0.989491] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.989498] ACPI: Power Button [PWRB] [ 0.989534] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.989549] ACPI: Power Button [PWRF] [ 0.990208] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.010713] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.012408] Linux agpgart interface v0.103 [ 1.015050] loop: module loaded [ 1.015248] libphy: Fixed MDIO Bus: probed [ 1.015249] tun: Universal TUN/TAP device driver, 1.6 [ 1.015279] PPP generic driver version 2.4.2 [ 1.015315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.015316] ehci-pci: EHCI PCI platform driver [ 1.015457] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.015462] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.015466] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.015475] ehci-pci 0000:00:12.2: debug port 1 [ 1.015518] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 1.027790] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.027943] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 1.027946] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.027950] usb usb1: Product: EHCI Host Controller [ 1.027952] usb usb1: Manufacturer: Linux 5.0.0-29-generic ehci_hcd [ 1.027954] usb usb1: SerialNumber: 0000:00:12.2 [ 1.028175] hub 1-0:1.0: USB hub found [ 1.028182] hub 1-0:1.0: 6 ports detected [ 1.028476] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.028480] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.028482] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.028491] ehci-pci 0000:00:13.2: debug port 1 [ 1.028528] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000 [ 1.043789] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.043910] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 1.043913] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.043916] usb usb2: Product: EHCI Host Controller [ 1.043919] usb usb2: Manufacturer: Linux 5.0.0-29-generic ehci_hcd [ 1.043921] usb usb2: SerialNumber: 0000:00:13.2 [ 1.044119] hub 2-0:1.0: USB hub found [ 1.044124] hub 2-0:1.0: 6 ports detected [ 1.044269] ehci-platform: EHCI generic platform driver [ 1.044277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.044280] ohci-pci: OHCI PCI platform driver [ 1.044399] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.044404] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.044433] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.107813] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 [ 1.107814] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.107815] usb usb3: Product: OHCI PCI host controller [ 1.107816] usb usb3: Manufacturer: Linux 5.0.0-29-generic ohci_hcd [ 1.107817] usb usb3: SerialNumber: 0000:00:12.0 [ 1.107979] hub 3-0:1.0: USB hub found [ 1.107987] hub 3-0:1.0: 3 ports detected [ 1.108212] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.108216] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.108232] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.171810] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 [ 1.171812] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.171813] usb usb4: Product: OHCI PCI host controller [ 1.171814] usb usb4: Manufacturer: Linux 5.0.0-29-generic ohci_hcd [ 1.171815] usb usb4: SerialNumber: 0000:00:12.1 [ 1.171987] hub 4-0:1.0: USB hub found [ 1.171995] hub 4-0:1.0: 3 ports detected [ 1.172216] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.172220] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.172249] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.235810] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 [ 1.235812] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.235813] usb usb5: Product: OHCI PCI host controller [ 1.235814] usb usb5: Manufacturer: Linux 5.0.0-29-generic ohci_hcd [ 1.235815] usb usb5: SerialNumber: 0000:00:13.0 [ 1.235909] hub 5-0:1.0: USB hub found [ 1.235917] hub 5-0:1.0: 3 ports detected [ 1.236172] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.236176] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.236197] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 1.297144] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 [ 1.297146] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.297147] usb usb6: Product: OHCI PCI host controller [ 1.297148] usb usb6: Manufacturer: Linux 5.0.0-29-generic ohci_hcd [ 1.297148] usb usb6: SerialNumber: 0000:00:13.1 [ 1.297288] hub 6-0:1.0: USB hub found [ 1.297296] hub 6-0:1.0: 3 ports detected [ 1.297608] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.297612] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.297629] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000 [ 1.361150] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 [ 1.361152] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.361153] usb usb7: Product: OHCI PCI host controller [ 1.361154] usb usb7: Manufacturer: Linux 5.0.0-29-generic ohci_hcd [ 1.361154] usb usb7: SerialNumber: 0000:00:14.5 [ 1.361335] hub 7-0:1.0: USB hub found [ 1.361343] hub 7-0:1.0: 2 ports detected [ 1.361495] ohci-platform: OHCI generic platform driver [ 1.361503] uhci_hcd: USB Universal Host Controller Interface driver [ 1.361587] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.361591] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 1.361663] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000090 [ 1.361781] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 1.361782] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.361783] usb usb8: Product: xHCI Host Controller [ 1.361784] usb usb8: Manufacturer: Linux 5.0.0-29-generic xhci-hcd [ 1.361785] usb usb8: SerialNumber: 0000:02:00.0 [ 1.361918] hub 8-0:1.0: USB hub found [ 1.361923] hub 8-0:1.0: 1 port detected [ 1.361993] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.361996] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 1.361998] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 1.362012] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.362034] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 [ 1.362035] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.362036] usb usb9: Product: xHCI Host Controller [ 1.362037] usb usb9: Manufacturer: Linux 5.0.0-29-generic xhci-hcd [ 1.362037] usb usb9: SerialNumber: 0000:02:00.0 [ 1.362109] hub 9-0:1.0: USB hub found [ 1.362117] hub 9-0:1.0: 4 ports detected [ 1.362305] i8042: PNP: No PS/2 controller found. [ 1.362305] i8042: Probing ports directly. [ 1.377098] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.395478] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 1.395479] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 1.534212] usb 2-1: New USB device found, idVendor=04e8, idProduct=3461, bcdDevice= 1.00 [ 1.534214] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.534215] usb 2-1: Product: M267x 287x Series [ 1.534216] usb 2-1: Manufacturer: Samsung Electronics Co., Ltd. [ 1.534216] usb 2-1: SerialNumber: ZD0PBJCGC001H1V [ 1.677220] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.677479] mousedev: PS/2 mouse device common for all mice [ 1.677610] rtc_cmos 00:02: RTC can wake from S4 [ 1.677736] rtc_cmos 00:02: registered as rtc0 [ 1.677750] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.677756] i2c /dev entries driver [ 1.677827] device-mapper: uevent: version 1.0.3 [ 1.677879] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.677895] platform eisa.0: Probing EISA bus 0 [ 1.677897] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.677898] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.677899] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.677900] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.677901] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.677902] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.677903] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.677904] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.677905] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.677906] platform eisa.0: EISA: Detected 0 cards [ 1.678047] ledtrig-cpu: registered to indicate activity on CPUs [ 1.678240] NET: Registered protocol family 10 [ 1.683052] Segment Routing with IPv6 [ 1.683071] NET: Registered protocol family 17 [ 1.683115] Key type dns_resolver registered [ 1.683546] mce: Using 7 MCE banks [ 1.683556] RAS: Correctable Errors collector initialized. [ 1.683563] microcode: microcode updated early to new patch_level=0x06000852 [ 1.683586] microcode: CPU0: patch_level=0x06000852 [ 1.683593] microcode: CPU1: patch_level=0x06000852 [ 1.683597] microcode: CPU2: patch_level=0x06000852 [ 1.683604] microcode: CPU3: patch_level=0x06000852 [ 1.683610] microcode: CPU4: patch_level=0x06000852 [ 1.683617] microcode: CPU5: patch_level=0x06000852 [ 1.683624] microcode: CPU6: patch_level=0x06000852 [ 1.683630] microcode: CPU7: patch_level=0x06000852 [ 1.683658] microcode: Microcode Update Driver: v2.2. [ 1.683665] sched_clock: Marking stable (1683416578, 237768)->(3548921392, -1865267046) [ 1.683892] registered taskstats version 1 [ 1.683900] Loading compiled-in X.509 certificates [ 1.685053] usb 3-1: new full-speed USB device number 2 using ohci-pci [ 1.685301] Loaded X.509 cert 'Build time autogenerated kernel key: fbc39ee92ddbe52f95f4eb7b7c198cd91c5d4d4a' [ 1.685320] zswap: loaded using pool lzo/zbud [ 1.689462] Key type big_key registered [ 1.689465] Key type trusted registered [ 1.691558] Key type encrypted registered [ 1.691561] AppArmor: AppArmor sha1 policy hashing enabled [ 1.691567] ima: No TPM chip found, activating TPM-bypass! [ 1.691570] ima: Allocated hash algorithm: sha1 [ 1.691575] No architecture policies found [ 1.691584] evm: Initialising EVM extended attributes: [ 1.691584] evm: security.selinux [ 1.691585] evm: security.SMACK64 [ 1.691585] evm: security.SMACK64EXEC [ 1.691585] evm: security.SMACK64TRANSMUTE [ 1.691586] evm: security.SMACK64MMAP [ 1.691586] evm: security.apparmor [ 1.691586] evm: security.ima [ 1.691587] evm: security.capability [ 1.691587] evm: HMAC attrs: 0x1 [ 1.691866] Magic number: 3:419:1006 [ 1.691923] memory memory45: hash matches [ 1.691976] rtc_cmos 00:02: setting system clock to 2019-09-23T21:58:48 UTC (1569275928) [ 1.692169] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.694476] Freeing unused decrypted memory: 2040K [ 1.695458] Freeing unused kernel image memory: 2584K [ 1.701122] usb 8-1: new high-speed USB device number 2 using xhci_hcd [ 1.717151] Write protecting the kernel read-only data: 22528k [ 1.717861] Freeing unused kernel image memory: 2016K [ 1.718536] Freeing unused kernel image memory: 1828K [ 1.729661] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.729668] Run /init as init process [ 1.801938] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20181213/utaddress-213) [ 1.801944] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.804116] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.804462] scsi host0: pata_atiixp [ 1.804986] scsi host1: pata_atiixp [ 1.805074] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.805075] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.805086] ahci 0000:00:11.0: version 3.0 [ 1.805368] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.805370] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.807124] scsi host2: ahci [ 1.807389] scsi host3: ahci [ 1.807779] scsi host4: ahci [ 1.809093] scsi host5: ahci [ 1.809248] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.809250] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.809253] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.809255] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.823531] libphy: r8169: probed [ 1.824581] r8169 0000:03:00.0 eth0: RTL8168g/8111g, 1c:1b:0d:32:ae:85, XID 4c0, IRQ 25 [ 1.824583] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.850050] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 1.850375] usb 8-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 [ 1.850377] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.850378] usb 8-1: Product: USB2.0 Hub [ 1.850958] hub 8-1:1.0: USB hub found [ 1.851137] hub 8-1:1.0: 4 ports detected [ 1.892186] usb 3-1: New USB device found, idVendor=0764, idProduct=0501, bcdDevice= 0.01 [ 1.892190] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.892193] usb 3-1: Product: CP900EPFCLCD [ 1.892195] usb 3-1: Manufacturer: CPS [ 1.892198] usb 3-1: SerialNumber: 000000000000 [ 1.897604] hidraw: raw HID events driver (C) Jiri Kosina [ 1.904647] usbcore: registered new interface driver usbhid [ 1.904647] usbhid: USB HID core driver [ 1.906851] hid-generic 0003:0764:0501.0001: hiddev0,hidraw0: USB HID v1.10 Device [CPS CP900EPFCLCD] on usb-0000:00:12.0-1/input0 [ 1.965131] tsc: Refined TSC clocksource calibration: 4000.011 MHz [ 1.965155] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a8672915d, max_idle_ns: 440795227657 ns [ 1.976754] clocksource: Switched to clocksource tsc [ 2.261119] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 2.289131] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.290764] ata3.00: supports DRM functions and may not be fully accessible [ 2.291452] ata3.00: disabling queued TRIM support [ 2.291454] ata3.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133 [ 2.291455] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.292632] ata3.00: supports DRM functions and may not be fully accessible [ 2.293145] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.293172] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.293253] ata3.00: disabling queued TRIM support [ 2.294082] ata4.00: ATA-8: WDC WD5000AAKS-00D2B0, 12.01C02, max UDMA/133 [ 2.294084] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.294160] ata3.00: configured for UDMA/133 [ 2.294366] ata5.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100 [ 2.294396] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 2.294586] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.294659] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 2.294683] sd 2:0:0:0: [sda] Write Protect is off [ 2.294684] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.294710] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.295217] sda: sda1 sda2 sda3 [ 2.295847] ata5.00: configured for UDMA/100 [ 2.295929] sd 2:0:0:0: [sda] supports TCG Opal [ 2.295930] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.295982] ata4.00: configured for UDMA/133 [ 2.296156] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 1C02 PQ: 0 ANSI: 5 [ 2.296324] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 2.296370] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.296387] sd 3:0:0:0: [sdb] Write Protect is off [ 2.296389] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.296423] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.297056] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.297560] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5 [ 2.297716] ata6.00: supports DRM functions and may not be fully accessible [ 2.297746] ata6.00: ATA-10: CT250MX500SSD1, M3CR023, max UDMA/133 [ 2.297748] ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.298348] ata6.00: supports DRM functions and may not be fully accessible [ 2.298855] ata6.00: configured for UDMA/133 [ 2.344787] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [ 2.344798] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [ 2.357492] random: fast init done [ 2.362814] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.362818] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.362893] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.362904] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.362908] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.363065] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.363127] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 2.363314] scsi 5:0:0:0: Direct-Access ATA CT250MX500SSD1 023 PQ: 0 ANSI: 5 [ 2.363516] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 2.363612] sd 5:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 2.363625] sd 5:0:0:0: [sdc] Write Protect is off [ 2.363626] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.363653] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.364183] sdc: sdc1 [ 2.364721] sd 5:0:0:0: [sdc] supports TCG Opal [ 2.364722] sd 5:0:0:0: [sdc] Attached SCSI disk [ 2.374134] sdb: [LDM] sdb1 [ 2.374708] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.441122] usb 1-2: New USB device found, idVendor=045e, idProduct=0779, bcdDevice= 1.06 [ 2.441124] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.441125] usb 1-2: Product: Microsoft® LifeCam HD-3000 [ 2.441126] usb 1-2: Manufacturer: Microsoft [ 2.837119] usb 3-3: new full-speed USB device number 3 using ohci-pci [ 3.032164] usb 3-3: New USB device found, idVendor=258a, idProduct=1006, bcdDevice=20.44 [ 3.032169] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.032172] usb 3-3: Product: Gaming KB [ 3.032174] usb 3-3: Manufacturer: Gaming KB [ 3.038567] input: Gaming KB Gaming KB as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:258A:1006.0002/input/input3 [ 3.097359] hid-generic 0003:258A:1006.0002: input,hidraw1: USB HID v1.11 Keyboard [Gaming KB Gaming KB ] on usb-0000:00:12.0-3/input0 [ 3.101763] input: Gaming KB Gaming KB System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:258A:1006.0003/input/input4 [ 3.161364] input: Gaming KB Gaming KB Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:258A:1006.0003/input/input5 [ 3.161425] input: Gaming KB Gaming KB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:258A:1006.0003/input/input6 [ 3.161525] hid-generic 0003:258A:1006.0003: input,hiddev1,hidraw2: USB HID v1.11 Keyboard [Gaming KB Gaming KB ] on usb-0000:00:12.0-3/input1 [ 3.793119] usb 4-1: new full-speed USB device number 2 using ohci-pci [ 3.994209] usb 4-1: New USB device found, idVendor=1532, idProduct=0037, bcdDevice= 2.00 [ 3.994213] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.994216] usb 4-1: Product: Razer DeathAdder 2013 [ 3.994219] usb 4-1: Manufacturer: Razer [ 4.000613] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:1532:0037.0004/input/input7 [ 4.000775] hid-generic 0003:1532:0037.0004: input,hidraw3: USB HID v1.11 Mouse [Razer Razer DeathAdder 2013] on usb-0000:00:12.1-1/input0 [ 4.005762] input: Razer Razer DeathAdder 2013 Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:1532:0037.0005/input/input8 [ 4.065365] input: Razer Razer DeathAdder 2013 Consumer Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:1532:0037.0005/input/input9 [ 4.065421] input: Razer Razer DeathAdder 2013 System Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:1532:0037.0005/input/input10 [ 4.065476] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:1532:0037.0005/input/input11 [ 4.065540] hid-generic 0003:1532:0037.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:12.1-1/input1 [ 4.068402] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.2/0003:1532:0037.0006/input/input12 [ 4.125357] hid-generic 0003:1532:0037.0006: input,hidraw5: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:12.1-1/input2 [ 4.727771] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 4.890783] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.909523] systemd[1]: Detected architecture x86-64. [ 4.913348] systemd[1]: Set hostname to . [ 5.035078] systemd[1]: Created slice System Slice. [ 5.035171] systemd[1]: Listening on Journal Socket. [ 5.036136] systemd[1]: Starting Load Kernel Modules... [ 5.036781] systemd[1]: Started Read required files in advance. [ 5.036991] systemd[1]: Listening on udev Control Socket. [ 5.037009] systemd[1]: Reached target User and Group Name Lookups. [ 5.037103] systemd[1]: Listening on Syslog Socket. [ 5.050131] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro [ 5.052849] lp: driver loaded but no devices found [ 5.056146] ppdev: user-space parallel port driver [ 5.058733] parport_pc 00:04: reported by Plug and Play ACPI [ 5.058808] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 5.127798] systemd-journald[363]: Received request to flush runtime journal from PID 1 [ 5.128800] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 5.153276] lp0: using parport0 (interrupt-driven). [ 5.415148] audit: type=1400 audit(1569275932.220:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=533 comm="apparmor_parser" [ 5.415506] audit: type=1400 audit(1569275932.220:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=535 comm="apparmor_parser" [ 5.416298] audit: type=1400 audit(1569275932.220:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=529 comm="apparmor_parser" [ 5.416302] audit: type=1400 audit(1569275932.220:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=529 comm="apparmor_parser" [ 5.416304] audit: type=1400 audit(1569275932.220:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=529 comm="apparmor_parser" [ 5.418033] audit: type=1400 audit(1569275932.224:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=531 comm="apparmor_parser" [ 5.418680] audit: type=1400 audit(1569275932.224:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=530 comm="apparmor_parser" [ 5.418683] audit: type=1400 audit(1569275932.224:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=530 comm="apparmor_parser" [ 5.420094] audit: type=1400 audit(1569275932.224:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=526 comm="apparmor_parser" [ 5.420097] audit: type=1400 audit(1569275932.224:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser" [ 5.665807] cryptd: max_cpu_qlen set to 1000 [ 5.691153] AVX version of gcm_enc/dec engaged. [ 5.691155] AES CTR mode by8 optimization enabled [ 5.731366] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.731374] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 5.739687] media: Linux media interface: v0.10 [ 5.740106] checking generic (df000000 130000) vs hw (c0000000 10000000) [ 5.740107] checking generic (df000000 130000) vs hw (de000000 2000000) [ 5.740108] fb0: switching to nouveaufb from VESA VGA [ 5.740145] Console: switching to colour dummy device 80x25 [ 5.740243] nouveau 0000:01:00.0: NVIDIA GP107 (137000a1) [ 5.748454] videodev: Linux video capture interface: v2.00 [ 5.749749] usblp 2-1:1.1: usblp2: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3461 [ 5.749786] usbcore: registered new interface driver usblp [ 5.758709] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 5.758711] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.758712] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.758713] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 5.758714] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 [ 5.758715] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 5.758716] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 5.758717] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 5.758718] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 5.777645] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 5.809323] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 5.830589] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 5.830699] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 5.852187] nouveau 0000:01:00.0: bios: version 86.07.22.00.53 [ 5.852290] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 5.854549] usbcore: registered new interface driver snd-usb-audio [ 5.855204] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam HD-3000 (045e:0779) [ 5.861311] uvcvideo 1-2:1.0: Entity type for entity Extension 5 was not initialized! [ 5.861315] uvcvideo 1-2:1.0: Entity type for entity Processing 4 was not initialized! [ 5.861317] uvcvideo 1-2:1.0: Entity type for entity Selector 3 was not initialized! [ 5.861319] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized! [ 5.861395] input: Microsoft® LifeCam HD-3000: Mi as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input18 [ 5.861497] usbcore: registered new interface driver uvcvideo [ 5.861498] USB Video Class driver (1.1.1) [ 5.946348] nouveau 0000:01:00.0: fb: 4096 MiB GDDR5 [ 5.953966] kvm: disabled by bios [ 5.967404] MCE: In-kernel MCE decoding enabled. [ 5.973647] EDAC amd64: Node 0: DRAM ECC disabled. [ 5.973649] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.085478] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.085479] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.177560] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.177562] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.245563] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.245565] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.246098] random: crng init done [ 6.246099] random: 7 urandom warning(s) missed due to ratelimiting [ 6.322075] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.322078] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 6.797117] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input19 [ 6.813107] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input20 [ 6.829095] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input21 [ 7.027940] Generic PHY r8169-300:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) [ 7.159523] r8169 0000:03:00.0 enp3s0: Link is Down [ 7.230285] [TTM] Zone kernel: Available graphics memory: 8202162 kiB [ 7.230287] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 7.230289] [TTM] Initializing pool allocator [ 7.230297] [TTM] Initializing DMA pool allocator [ 7.230312] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB [ 7.230314] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB [ 7.230317] nouveau 0000:01:00.0: DRM: BIT table 'A' not found [ 7.230319] nouveau 0000:01:00.0: DRM: BIT table 'L' not found [ 7.230320] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 7.230322] nouveau 0000:01:00.0: DRM: DCB version 4.1 [ 7.230324] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f42 04620030 [ 7.230326] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011f62 04620010 [ 7.230327] nouveau 0000:01:00.0: DRM: DCB outp 02: 02822f76 04600020 [ 7.230329] nouveau 0000:01:00.0: DRM: DCB outp 03: 02022f72 04620020 [ 7.230331] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031 [ 7.230332] nouveau 0000:01:00.0: DRM: DCB conn 01: 00010161 [ 7.230333] nouveau 0000:01:00.0: DRM: DCB conn 02: 00020246 [ 7.253114] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.253115] [drm] Driver supports precise vblank timestamp query. [ 7.253740] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 7.515316] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x200000, bo 00000000eb6783c0 [ 7.586517] fbcon: nouveaufb (fb0) is primary device [ 7.586696] Console: switching to colour frame buffer device 240x67 [ 7.586705] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 7.649202] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 8.053336] bpfilter: Loaded bpfilter_umh pid 1295 [ 11.565639] usblp2: removed [ 11.586315] usblp 2-1:1.1: usblp2: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3461 [ 12.886892] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 12.886911] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 34.964077] rfkill: input handler disabled [ 85.833486] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for HDMI-A-1 [ 105.642459] nouveau 0000:01:00.0: HDMI-A-1: EDID is invalid: [ 105.642464] [00] BAD a7 c1 04 e3 93 f2 8f ff eb 94 5b bc a7 77 3d b3 [ 105.642466] [00] BAD 84 40 32 75 9f f2 0f b6 4e 4d 25 c5 5c 20 2c a3 [ 105.642468] [00] BAD 86 79 ad 3f 07 ba 23 e9 53 c8 8a 9c 0e e4 2b e8 [ 105.642469] [00] BAD b9 ce ae f3 1b fb 36 d9 5b d2 89 96 03 eb 19 a2 [ 105.642470] [00] BAD 9e 92 6c 06 4e 5b 1f b5 78 c2 8e d9 ba ef 27 a9 [ 105.642472] [00] BAD 01 f2 2e b7 4d d8 ce f1 cc 50 8f b0 1d 60 29 ba [ 105.642473] [00] BAD a7 76 0f 40 4f 71 06 d9 8f 58 0d b2 23 74 61 fa [ 105.642474] [00] BAD 56 78 07 f3 0a f2 ae fd 6d d9 97 94 2e f2 7b c0 [ 105.642479] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for HDMI-A-1 [ 123.733705] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for HDMI-A-1 [ 123.936348] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for HDMI-A-1 [ 124.194964] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for HDMI-A-1 [ 214.989961] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for HDMI-A-1 [ 229.120546] rfkill: input handler enabled [ 301.663120] rfkill: input handler disabled [ 304.064902] rfkill: input handler enabled [ 312.179116] rfkill: input handler disabled [ 314.821825] rfkill: input handler enabled [ 332.944870] rfkill: input handler disabled [ 357.508525] rfkill: input handler enabled [ 358.627962] rfkill: input handler disabled [ 432.495648] rfkill: input handler enabled [ 433.139477] rfkill: input handler disabled [ 466.264105] rfkill: input handler enabled [ 466.265974] rfkill: input handler disabled [ 551.339809] show_signal_msg: 35 callbacks suppressed [ 551.339814] gnome-shell[1798]: segfault at 4400 ip 00007f29b593b9e1 sp 00007ffe617a1710 error 4 in libmutter-2.so.0.0.0[7f29b58b0000+158000] [ 551.339837] Code: 00 4c 89 e2 48 89 ee 48 89 df e8 fa 04 fc ff 85 c0 74 5e 4c 8b 74 24 18 e8 4c b0 01 00 4d 85 f6 74 df 49 8b 0e 48 85 c9 74 05 <48> 39 01 74 0f 48 89 c6 4c 89 f7 e8 4f 14 fc ff 85 c0 74 c3 41 f6 [ 1403.520044] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for HDMI-A-1 [ 1418.233422] i2c i2c-6: sendbytes: NAK bailout. [ 1437.492862] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for HDMI-A-1