[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-38-generic (buildd@zirconium) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #83-Ubuntu SMP Wed Jan 4 11:13:04 UTC 2012 (Ubuntu 2.6.32-38.83-generic 2.6.32.52+drm33.21) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f5d0000 (usable) [ 0.000000] BIOS-e820: 000000003f5d0000 - 000000003f5e0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f5e0000 - 000000003f5e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f5e3000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x3f5d0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 0C0000000 write-back [ 0.000000] 1 base 03F600000 mask 0FFE00000 uncachable [ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f5d0000 (usable) [ 0.000000] modified: 000000003f5d0000 - 000000003f5e0000 (ACPI data) [ 0.000000] modified: 000000003f5e0000 - 000000003f5e3000 (ACPI NVS) [ 0.000000] modified: 000000003f5e3000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 2f0fc000 - 2f89b302 [ 0.000000] ACPI: RSDP 000f7cb0 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 3f5d7771 00074 (v01 LENOVO CB-01 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 3f5dfc60 000F4 (v03 INTEL 06040000 PTL 00000002) [ 0.000000] ACPI: DSDT 3f5d8907 072E5 (v01 INTEL BEARG31A 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 3f5e2fc0 00040 [ 0.000000] ACPI: TCPA 3f5dfd54 00032 (v01 Phoeni x 06040000 TL 00000000) [ 0.000000] ACPI: MCFG 3f5dfd86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 3f5dfdc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 3f5dfdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 3f5dfe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 3f5dfe8a 00176 (v01 LENOVO CB-01 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 3f5d7d67 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 3f5d7cc1 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 3f5d77e5 004DC (v02 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 125MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e3f18] TEXT DATA BSS ==> [0000100000 - 00008e3f18] [ 0.000000] #4 [002f0fc000 - 002f89b302] RAMDISK ==> [002f0fc000 - 002f89b302] [ 0.000000] #5 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #6 [00008e4000 - 00008e71f0] BRK ==> [00008e4000 - 00008e71f0] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f7ce0] f7ce0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f5d0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0003f5d0 [ 0.000000] On node 0 totalpages: 259433 [ 0.000000] free_area_init_node: node 0, pgdat c079e9c0, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3961 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 252 pages used for memmap [ 0.000000] HighMem zone: 31958 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257405 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-38-generic root=UUID=4de1eacb-f218-4059-adfd-7d1c21b31871 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5190720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f5d0) [ 0.000000] Memory: 1007060k/1038144k available (4696k kernel code, 30060k reserved, 2123k data, 664k init, 128840k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a9000 - 0xc084f000 ( 664 kB) [ 0.000000] .data : 0xc0596257 - 0xc07a8f88 (2123 kB) [ 0.000000] .text : 0xc0100000 - 0xc0596257 (4696 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1662.303 MHz processor. [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.60 BogoMIPS (lpj=6649212) [ 0.004044] Security Framework initialized [ 0.004083] AppArmor: AppArmor initialized [ 0.004100] Mount-cache hash table entries: 512 [ 0.004323] Initializing cgroup subsys ns [ 0.004331] Initializing cgroup subsys cpuacct [ 0.004341] Initializing cgroup subsys memory [ 0.004354] Initializing cgroup subsys devices [ 0.004360] Initializing cgroup subsys freezer [ 0.004366] Initializing cgroup subsys net_cls [ 0.004403] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004410] CPU: L2 cache: 512K [ 0.004415] CPU: Physical Processor ID: 0 [ 0.004419] CPU: Processor Core ID: 0 [ 0.004426] mce: CPU supports 5 MCE banks [ 0.004443] CPU0: Thermal monitoring enabled (TM1) [ 0.004451] using mwait in idle threads. [ 0.004462] Performance Events: Atom events, Intel PMU driver. [ 0.004478] ... version: 3 [ 0.004482] ... bit width: 40 [ 0.004487] ... generic registers: 2 [ 0.004492] ... value mask: 000000ffffffffff [ 0.004497] ... max period: 000000007fffffff [ 0.004502] ... fixed-purpose events: 3 [ 0.004506] ... event mask: 0000000700000003 [ 0.004514] Checking 'hlt' instruction... OK. [ 0.020012] Disabling 4MB page tables to avoid TLB bug [ 0.024292] ACPI: Core revision 20090903 [ 0.044018] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.044029] ftrace: allocating 21817 entries in 43 pages [ 0.056069] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.056480] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.096172] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a [ 0.100001] APIC calibration not consistent with PM-Timer: 919ms instead of 100ms [ 0.100001] APIC delta adjusted to PM-Timer: 1039060 (9559257) [ 0.100001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.008000] CPU: L2 cache: 512K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 0 [ 0.008000] CPU1: Thermal monitoring enabled (TM1) [ 0.184129] CPU1: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a [ 0.184145] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.188042] Brought up 2 CPUs [ 0.188050] Total of 2 processors activated (6649.61 BogoMIPS). [ 0.188481] CPU0 attaching sched-domain: [ 0.188490] domain 0: span 0-1 level SIBLING [ 0.188495] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.188507] domain 1: span 0-1 level MC [ 0.188513] groups: 0-1 (cpu_power = 1178) [ 0.188524] CPU1 attaching sched-domain: [ 0.188529] domain 0: span 0-1 level SIBLING [ 0.188534] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.188545] domain 1: span 0-1 level MC [ 0.188550] groups: 0-1 (cpu_power = 1178) [ 0.188719] devtmpfs: initialized [ 0.188719] regulator: core version 0.5 [ 0.188719] Time: 11:42:51 Date: 02/11/12 [ 0.188719] NET: Registered protocol family 16 [ 0.188719] Trying to unpack rootfs image as initramfs... [ 0.188719] EISA bus registered [ 0.188719] ACPI: bus type pci registered [ 0.188725] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 16 [ 0.188734] PCI: MCFG area at e0000000 reserved in E820 [ 0.188741] PCI: Using MMCONFIG for extended config space [ 0.188747] PCI: Using configuration type 1 for base access [ 0.193666] bio: create slab at 0 [ 0.196363] ACPI: EC: Look up EC in DSDT [ 0.224213] ACPI: Interpreter enabled [ 0.224229] ACPI: (supports S0 S1 S3 S4 S5) [ 0.224297] ACPI: Using IOAPIC for interrupt routing [ 0.241310] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.241965] ACPI: No dock devices found. [ 0.244805] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.244825] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70140d8), AE_ALREADY_EXISTS [ 0.244846] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 0.244918] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.245102] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0200000-0xf027ffff] [ 0.245115] pci 0000:00:02.0: reg 14 io port: [0x18e8-0x18ef] [ 0.245126] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.245138] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0000000-0xf00fffff] [ 0.245200] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0280000-0xf02fffff] [ 0.245371] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0500000-0xf0503fff] [ 0.245456] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.245467] pci 0000:00:1b.0: PME# disabled [ 0.245597] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.245608] pci 0000:00:1c.0: PME# disabled [ 0.245743] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.245753] pci 0000:00:1c.2: PME# disabled [ 0.245848] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] [ 0.245943] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] [ 0.246043] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] [ 0.246137] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f] [ 0.246236] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0504000-0xf05043ff] [ 0.246323] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.246334] pci 0000:00:1d.7: PME# disabled [ 0.246547] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared [ 0.246652] pci 0000:00:1f.2: reg 10 io port: [0x18e0-0x18e7] [ 0.246668] pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7] [ 0.246683] pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df] [ 0.246698] pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3] [ 0.246712] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18cf] [ 0.246727] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0504400-0xf05047ff] [ 0.246782] pci 0000:00:1f.2: PME# supported from D3hot [ 0.246794] pci 0000:00:1f.2: PME# disabled [ 0.246879] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf] [ 0.247004] pci 0000:05:00.0: reg 10 io port: [0x2000-0x20ff] [ 0.247040] pci 0000:05:00.0: reg 18 64bit mmio pref: [0xf0520000-0xf0520fff] [ 0.247068] pci 0000:05:00.0: reg 20 64bit mmio pref: [0xf0510000-0xf051ffff] [ 0.247086] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.247154] pci 0000:05:00.0: supports D1 D2 [ 0.247161] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.247172] pci 0000:05:00.0: PME# disabled [ 0.247285] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.247304] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0500000-0xf05fffff] [ 0.247436] pci 0000:09:00.0: reg 10 64bit mmio: [0xf0100000-0xf010ffff] [ 0.247594] pci 0000:09:00.0: supports D1 [ 0.247602] pci 0000:09:00.0: PME# supported from D0 D1 D3hot [ 0.247616] pci 0000:09:00.0: PME# disabled [ 0.247744] pci 0000:00:1c.2: bridge 32bit mmio: [0xf0100000-0xf01fffff] [ 0.247838] pci 0000:00:1e.0: transparent bridge [ 0.247885] pci_bus 0000:00: on NUMA node 0 [ 0.247904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.248273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.248501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.248706] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.249209] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.249229] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70140d8), AE_ALREADY_EXISTS [ 0.267646] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.267944] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.268256] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.268533] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.268837] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.269128] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.269425] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.269719] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.270058] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.270087] vgaarb: loaded [ 0.270441] SCSI subsystem initialized [ 0.270673] libata version 3.00 loaded. [ 0.270884] usbcore: registered new interface driver usbfs [ 0.270925] usbcore: registered new interface driver hub [ 0.271016] usbcore: registered new device driver usb [ 0.271616] ACPI: WMI: Mapper loaded [ 0.271624] PCI: Using ACPI for IRQ routing [ 0.271680] pci 0000:00:1d.7: BAR 0: address space collision on of device [0xf0504000-0xf05043ff] [ 0.271688] pci 0000:00:1d.7: BAR 0: can't allocate resource [ 0.271709] pci 0000:00:1f.2: BAR 5: address space collision on of device [0xf0504400-0xf05047ff] [ 0.271717] pci 0000:00:1f.2: BAR 5: can't allocate resource [ 0.271752] pci 0000:00:1b.0: BAR 0: address space collision on of device [0xf0500000-0xf0503fff] [ 0.271760] pci 0000:00:1b.0: BAR 0: can't allocate resource [ 0.272073] NetLabel: Initializing [ 0.272081] NetLabel: domain hash size = 128 [ 0.272085] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.272116] NetLabel: unlabeled traffic allowed by default [ 0.272228] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.272241] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.272256] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.276464] Switching to clocksource tsc [ 0.483336] AppArmor: AppArmor Filesystem Enabled [ 0.483372] pnp: PnP ACPI init [ 0.483412] ACPI: bus type pnp registered [ 0.489705] pnp: PnP ACPI: found 10 devices [ 0.489715] ACPI: ACPI bus type pnp unregistered [ 0.489726] PnPBIOS: Disabled by ACPI PNP [ 0.489763] system 00:01: ioport range 0x800-0x80f has been reserved [ 0.489773] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.489783] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 0.489792] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.489803] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 0.489813] system 00:01: ioport range 0x700-0x70f has been reserved [ 0.489823] system 00:01: ioport range 0x164e-0x174c has been reserved [ 0.489834] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.489844] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.489854] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.489864] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved [ 0.525063] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 [ 0.525075] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.525090] pci 0000:00:1c.0: MEM window: 0x40000000-0x403fffff [ 0.525103] pci 0000:00:1c.0: PREFETCH window: 0x000000f0500000-0x000000f05fffff [ 0.525121] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:09 [ 0.525131] pci 0000:00:1c.2: IO window: 0x3000-0x3fff [ 0.525145] pci 0000:00:1c.2: MEM window: 0xf0100000-0xf01fffff [ 0.525158] pci 0000:00:1c.2: PREFETCH window: 0x00000040400000-0x000000405fffff [ 0.525175] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:11 [ 0.525182] pci 0000:00:1e.0: IO window: disabled [ 0.525195] pci 0000:00:1e.0: MEM window: disabled [ 0.525206] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.525246] alloc irq_desc for 16 on node -1 [ 0.525254] alloc kstat_irqs on node -1 [ 0.525272] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.525285] pci 0000:00:1c.0: setting latency timer to 64 [ 0.525304] pci 0000:00:1c.2: enabling device (0000 -> 0003) [ 0.525314] alloc irq_desc for 18 on node -1 [ 0.525320] alloc kstat_irqs on node -1 [ 0.525331] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.525344] pci 0000:00:1c.2: setting latency timer to 64 [ 0.525361] pci 0000:00:1e.0: setting latency timer to 64 [ 0.525373] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.525381] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.525390] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff] [ 0.525398] pci_bus 0000:05: resource 1 mem: [0x40000000-0x403fffff] [ 0.525406] pci_bus 0000:05: resource 2 pref mem [0xf0500000-0xf05fffff] [ 0.525415] pci_bus 0000:09: resource 0 io: [0x3000-0x3fff] [ 0.525423] pci_bus 0000:09: resource 1 mem: [0xf0100000-0xf01fffff] [ 0.525431] pci_bus 0000:09: resource 2 pref mem [0x40400000-0x405fffff] [ 0.525440] pci_bus 0000:11: resource 3 io: [0x00-0xffff] [ 0.525448] pci_bus 0000:11: resource 4 mem: [0x000000-0xffffffff] [ 0.525544] NET: Registered protocol family 2 [ 0.525816] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.526771] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.527876] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.528387] TCP: Hash tables configured (established 131072 bind 65536) [ 0.528399] TCP reno registered [ 0.528663] NET: Registered protocol family 1 [ 0.528718] pci 0000:00:02.0: Boot video device [ 0.528940] Simple Boot Flag at 0x36 set to 0x1 [ 0.529386] cpufreq-nforce2: No nForce2 chipset. [ 0.529458] Scanning for low memory corruption every 60 seconds [ 0.529780] audit: initializing netlink socket (disabled) [ 0.529808] type=2000 audit(1328960570.526:1): initialized [ 0.550649] highmem bounce pool size: 64 pages [ 0.550666] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.555711] VFS: Disk quotas dquot_6.5.2 [ 0.555909] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.557856] fuse init (API version 7.13) [ 0.558135] msgmni has been set to 1716 [ 0.558821] alg: No test for stdrng (krng) [ 0.559017] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.559027] io scheduler noop registered [ 0.559033] io scheduler anticipatory registered [ 0.559038] io scheduler deadline registered [ 0.559182] io scheduler cfq registered (default) [ 0.559507] alloc irq_desc for 24 on node -1 [ 0.559514] alloc kstat_irqs on node -1 [ 0.559535] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.559554] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.559825] alloc irq_desc for 25 on node -1 [ 0.559832] alloc kstat_irqs on node -1 [ 0.559852] pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X [ 0.559872] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.560109] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.560377] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.560396] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70140d8), AE_ALREADY_EXISTS [ 0.560724] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.560744] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70140d8), AE_ALREADY_EXISTS [ 0.561127] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.561146] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70140d8), AE_ALREADY_EXISTS [ 0.561464] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.561484] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70140d8), AE_ALREADY_EXISTS [ 0.561615] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.563313] ACPI: AC Adapter [ACAD] (on-line) [ 0.563566] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0 [ 0.563577] ACPI: Power Button [PWRB] [ 0.563716] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.564198] ACPI: Lid Switch [LID] [ 0.564350] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.564360] ACPI: Sleep Button [SLPB] [ 0.564491] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.564500] ACPI: Power Button [PWRF] [ 0.566034] ACPI: SSDT 3f5d8630 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.567332] ACPI: SSDT 3f5d7fc6 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.573909] Monitor-Mwait will be used to enter C-1 state [ 0.574011] Monitor-Mwait will be used to enter C-2 state [ 0.574105] Monitor-Mwait will be used to enter C-3 state [ 0.574129] Marking TSC unstable due to TSC halts in idle [ 0.574299] processor LNXCPU:00: registered as cooling_device0 [ 0.575301] ACPI: SSDT 3f5d8833 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.576242] ACPI: SSDT 3f5d85ab 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.577927] Switching to clocksource hpet [ 0.578750] processor LNXCPU:01: registered as cooling_device1 [ 0.585942] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.585969] ACPI: Thermal Zone [TZ00] (48 C) [ 0.591063] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.595051] brd: module loaded [ 0.596676] loop: module loaded [ 0.597096] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.598403] Fixed MDIO Bus: probed [ 0.598512] PPP generic driver version 2.4.2 [ 0.598630] tun: Universal TUN/TAP device driver, 1.6 [ 0.598637] tun: (C) 1999-2004 Max Krasnyansky [ 0.598907] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.599002] alloc irq_desc for 23 on node -1 [ 0.599009] alloc kstat_irqs on node -1 [ 0.599025] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.599107] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.599118] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.599218] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.599268] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.599289] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.603185] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.603228] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x40604000 [ 0.607209] isapnp: Scanning for PnP cards... [ 0.700424] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.700826] usb usb1: configuration #1 chosen from 1 choice [ 0.700915] hub 1-0:1.0: USB hub found [ 0.700938] hub 1-0:1.0: 8 ports detected [ 0.701142] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.701189] uhci_hcd: USB Universal Host Controller Interface driver [ 0.701274] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.701292] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.701302] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.701491] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.701562] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 0.701902] usb usb2: configuration #1 chosen from 1 choice [ 0.701984] hub 2-0:1.0: USB hub found [ 0.702004] hub 2-0:1.0: 2 ports detected [ 0.702124] alloc irq_desc for 19 on node -1 [ 0.702132] alloc kstat_irqs on node -1 [ 0.702148] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.702164] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.702173] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.702291] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.702358] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 0.702724] usb usb3: configuration #1 chosen from 1 choice [ 0.702809] hub 3-0:1.0: USB hub found [ 0.702828] hub 3-0:1.0: 2 ports detected [ 0.702957] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.702974] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.702983] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.703099] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.703158] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 0.703411] usb usb4: configuration #1 chosen from 1 choice [ 0.703500] hub 4-0:1.0: USB hub found [ 0.703523] hub 4-0:1.0: 2 ports detected [ 0.703743] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.703762] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.703771] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.703901] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.703962] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 [ 0.704228] usb usb5: configuration #1 chosen from 1 choice [ 0.704315] hub 5-0:1.0: USB hub found [ 0.704336] hub 5-0:1.0: 2 ports detected [ 0.704607] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.720036] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.730332] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.730363] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.730374] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.730384] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.730393] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.730692] mice: PS/2 mouse device common for all mice [ 0.731234] rtc_cmos 00:05: RTC can wake from S4 [ 0.731342] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.731392] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.731730] device-mapper: uevent: version 1.0.3 [ 0.732085] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.825037] device-mapper: multipath: version 1.1.0 loaded [ 0.825047] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.868651] EISA: Probing bus 0 at eisa.0 [ 0.868665] Cannot allocate resource for EISA slot 1 [ 0.868673] Cannot allocate resource for EISA slot 2 [ 0.868679] Cannot allocate resource for EISA slot 3 [ 0.868708] EISA: Detected 0 cards. [ 0.874840] Freeing initrd memory: 7804k freed [ 0.881749] cpuidle: using governor ladder [ 0.882052] cpuidle: using governor menu [ 0.883219] TCP cubic registered [ 0.883706] NET: Registered protocol family 10 [ 0.886080] NET: Registered protocol family 17 [ 0.887306] Using IPI No-Shortcut mode [ 0.887586] PM: Resume from disk failed. [ 0.887614] registered taskstats version 1 [ 0.888338] Magic number: 0:650:731 [ 0.888478] rtc_cmos 00:05: setting system clock to 2012-02-11 11:42:52 UTC (1328960572) [ 0.888487] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.888492] EDD information not available. [ 0.890836] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.994461] isapnp: No Plug & Play device found [ 1.028154] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.195209] Freeing unused kernel memory: 664k freed [ 2.195747] Write protecting the kernel text: 4700k [ 2.195823] Write protecting the kernel read-only data: 1844k [ 2.199893] ACPI: Battery Slot [BAT1] (battery present) [ 2.237562] udev: starting version 151 [ 2.346527] usb 1-1: configuration #1 chosen from 1 choice [ 2.510577] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.510623] r8169 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.510694] r8169 0000:05:00.0: setting latency timer to 64 [ 2.510773] alloc irq_desc for 26 on node -1 [ 2.510781] alloc kstat_irqs on node -1 [ 2.510809] r8169 0000:05:00.0: irq 26 for MSI/MSI-X [ 2.513031] eth0: RTL8102e at 0xf8060000, 60:eb:69:54:a0:69, XID 04e00000 IRQ 26 [ 2.548559] ahci 0000:00:1f.2: version 3.0 [ 2.548597] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.548685] alloc irq_desc for 27 on node -1 [ 2.548692] alloc kstat_irqs on node -1 [ 2.548715] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 2.548790] ahci: SSS flag set, parallel bus scan disabled [ 2.548851] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 2.548863] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part [ 2.548877] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.568071] usb 1-7: new high speed USB device using ehci_hcd and address 4 [ 2.568230] Initializing USB Mass Storage driver... [ 2.568536] scsi1 : SCSI emulation for USB Mass Storage devices [ 2.568882] usbcore: registered new interface driver usb-storage [ 2.568893] USB Mass Storage support registered. [ 2.569203] usb-storage: device found at 2 [ 2.569210] usb-storage: waiting for device to settle before scanning [ 2.569536] scsi0 : ahci [ 2.570039] scsi2 : ahci [ 2.570273] scsi3 : ahci [ 2.570492] scsi4 : ahci [ 2.570924] ata1: SATA max UDMA/133 abar m1024@0x40604400 port 0x40604500 irq 27 [ 2.570937] ata2: SATA max UDMA/133 abar m1024@0x40604400 port 0x40604580 irq 27 [ 2.570945] ata3: DUMMY [ 2.570950] ata4: DUMMY [ 2.711950] usb 1-7: configuration #1 chosen from 1 choice [ 2.716967] scsi5 : SCSI emulation for USB Mass Storage devices [ 2.717384] usb-storage: device found at 4 [ 2.717392] usb-storage: waiting for device to settle before scanning [ 2.828240] usb 1-8: new high speed USB device using ehci_hcd and address 5 [ 2.888151] ata1: SATA link down (SStatus 0 SControl 300) [ 2.965443] usb 1-8: configuration #1 chosen from 1 choice [ 3.204211] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 3.224227] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.225897] ata2.00: ATA-8: WDC WD2500BEVT-24A23T0, 01.01A02, max UDMA/133 [ 3.225905] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.227954] ata2.00: configured for UDMA/133 [ 3.240475] scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVT-2 01.0 PQ: 0 ANSI: 5 [ 3.240899] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.240925] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.241377] sd 2:0:0:0: [sda] Write Protect is off [ 3.241385] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.241479] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.241925] sda: sda1 sda2 < sda5 > [ 3.304465] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.368758] usb 3-2: configuration #1 chosen from 1 choice [ 3.647573] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 7.568663] usb-storage: device scan complete [ 7.569364] scsi 1:0:0:0: Direct-Access Generic USB Disk 9.02 PQ: 0 ANSI: 2 [ 7.570583] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 7.571068] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 7.571834] sd 1:0:0:0: [sdb] Write Protect is off [ 7.571847] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 7.571856] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 7.573960] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 7.573977] sdb: sdb1 [ 7.597460] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 7.597474] sd 1:0:0:0: [sdb] Attached SCSI disk [ 7.716557] usb-storage: device scan complete [ 7.718890] scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 7.719999] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 7.724224] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 13.775884] Adding 2975736k swap on /dev/sda5. Priority:-1 extents:1 across:2975736k [ 13.790458] udev: starting version 151 [ 13.894807] lp: driver loaded but no devices found [ 14.257081] Linux agpgart interface v0.103 [ 14.504149] Bluetooth: Core ver 2.15 [ 14.513603] NET: Registered protocol family 31 [ 14.513611] Bluetooth: HCI device and connection manager initialized [ 14.513620] Bluetooth: HCI socket layer initialized [ 14.620114] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 14.620507] usbcore: registered new interface driver btusb [ 14.679592] type=1505 audit(1328960586.287:2): operation="profile_load" pid=596 name="/sbin/dhclient3" [ 14.680368] type=1505 audit(1328960586.291:3): operation="profile_load" pid=596 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.680835] type=1505 audit(1328960586.291:4): operation="profile_load" pid=596 name="/usr/lib/connman/scripts/dhclient-script" [ 14.777015] [drm] Initialized drm 1.1.0 20060810 [ 14.821674] cfg80211: Calling CRDA to update world regulatory domain [ 14.856812] agpgart-intel 0000:00:00.0: Intel IGD Chipset [ 14.857224] agpgart-intel 0000:00:00.0: detected 8188K stolen memory [ 14.860217] cfg80211: World regulatory domain updated: [ 14.860226] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.860235] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.860243] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.860250] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.860258] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.860265] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.885794] Linux video capture interface: v2.00 [ 14.904171] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 15.031162] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (090c:37b4) [ 15.033100] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input6 [ 15.033729] usbcore: registered new interface driver uvcvideo [ 15.034377] USB Video Class driver (v0.1.0) [ 15.167409] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.167423] i915 0000:00:02.0: setting latency timer to 64 [ 15.174765] ath9k 0000:09:00.0: enabling device (0104 -> 0106) [ 15.174786] ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 15.174811] ath9k 0000:09:00.0: setting latency timer to 64 [ 15.199475] alloc irq_desc for 28 on node -1 [ 15.199484] alloc kstat_irqs on node -1 [ 15.199501] i915 0000:00:02.0: irq 28 for MSI/MSI-X [ 15.199516] [drm] set up 7M of stolen space [ 15.225833] ath: EEPROM regdomain: 0x65 [ 15.225841] ath: EEPROM indicates we should expect a direct regpair map [ 15.225850] ath: Country alpha2 being used: 00 [ 15.225855] ath: Regpair used: 0x65 [ 15.432606] [drm] initialized overlay support [ 15.437257] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 15.439019] Registered led device: ath9k-phy0::radio [ 15.439066] Registered led device: ath9k-phy0::assoc [ 15.439109] Registered led device: ath9k-phy0::tx [ 15.439152] Registered led device: ath9k-phy0::rx [ 15.439178] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf8560000, irq=18 [ 15.557603] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04731/0xa40000/0x4a0000 [ 15.563648] type=1505 audit(1328960587.171:5): operation="profile_replace" pid=773 name="/sbin/dhclient3" [ 15.569935] type=1505 audit(1328960587.179:6): operation="profile_replace" pid=773 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.570320] type=1505 audit(1328960587.179:7): operation="profile_replace" pid=773 name="/usr/lib/connman/scripts/dhclient-script" [ 15.616581] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 15.620698] type=1505 audit(1328960587.231:8): operation="profile_load" pid=777 name="/usr/lib/cups/backend/cups-pdf" [ 15.621527] type=1505 audit(1328960587.231:9): operation="profile_load" pid=777 name="/usr/sbin/cupsd" [ 15.634753] type=1505 audit(1328960587.243:10): operation="profile_load" pid=774 name="/usr/bin/evince" [ 15.647990] type=1505 audit(1328960587.255:11): operation="profile_load" pid=779 name="/usr/sbin/tcpdump" [ 15.949662] r8169: eth0: link down [ 15.950354] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.957709] fb0: inteldrmfb frame buffer device [ 15.957717] registered panic notifier [ 15.957779] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 15.957870] HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106) [ 15.957888] alloc irq_desc for 22 on node -1 [ 15.957895] alloc kstat_irqs on node -1 [ 15.957912] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 15.957983] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 15.974252] vga16fb: initializing [ 15.974264] vga16fb: mapped to 0xc00a0000 [ 15.974275] vga16fb: not registering due to another framebuffer present [ 16.044856] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 16.088975] [drm] Big FIFO is enabled [ 16.088995] [drm] Big FIFO is enabled [ 16.171731] hda_codec: ALC272: BIOS auto-probing. [ 16.173182] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 16.183152] Console: switching to colour frame buffer device 128x37 [ 16.557564] Bluetooth: L2CAP ver 2.14 [ 16.557573] Bluetooth: L2CAP socket layer initialized [ 16.593281] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.593290] Bluetooth: BNEP filters: protocol multicast [ 16.642703] Bridge firewalling registered [ 16.673766] ppdev: user-space parallel port driver [ 16.678472] Bluetooth: SCO (Voice Link) ver 0.6 [ 16.678481] Bluetooth: SCO socket layer initialized [ 16.816473] Bluetooth: RFCOMM TTY layer initialized [ 16.816489] Bluetooth: RFCOMM socket layer initialized [ 16.816496] Bluetooth: RFCOMM ver 1.11 [ 17.407984] CPU0 attaching NULL sched-domain. [ 17.407999] CPU1 attaching NULL sched-domain. [ 17.429233] CPU0 attaching sched-domain: [ 17.429245] domain 0: span 0-1 level SIBLING [ 17.429254] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 17.429273] domain 1: span 0-1 level MC [ 17.429280] groups: 0-1 (cpu_power = 1178) [ 17.429297] CPU1 attaching sched-domain: [ 17.429304] domain 0: span 0-1 level SIBLING [ 17.429311] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 17.429328] domain 1: span 0-1 level MC [ 17.429335] groups: 0-1 (cpu_power = 1178) [ 21.769968] CPU0 attaching NULL sched-domain. [ 21.769982] CPU1 attaching NULL sched-domain. [ 21.793169] CPU0 attaching sched-domain: [ 21.793181] domain 0: span 0-1 level SIBLING [ 21.793190] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 21.793209] domain 1: span 0-1 level MC [ 21.793217] groups: 0-1 (cpu_power = 1178) [ 21.793234] CPU1 attaching sched-domain: [ 21.793241] domain 0: span 0-1 level SIBLING [ 21.793249] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 21.793267] domain 1: span 0-1 level MC [ 21.793275] groups: 0-1 (cpu_power = 1178) [ 30.827172] wlan0: direct probe to AP 00:26:18:43:18:29 (try 1) [ 30.827230] wlan0: deauthenticating from 00:26:18:43:18:29 by local choice (reason=3) [ 30.827310] wlan0: direct probe to AP 00:26:18:43:18:29 (try 1) [ 30.832243] wlan0: direct probe responded [ 30.832255] wlan0: authenticate with AP 00:26:18:43:18:29 (try 1) [ 30.834292] wlan0: authenticated [ 30.834351] wlan0: associate with AP 00:26:18:43:18:29 (try 1) [ 30.837003] wlan0: RX AssocResp from 00:26:18:43:18:29 (capab=0x411 status=0 aid=1) [ 30.837013] wlan0: associated [ 30.837842] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 30.871071] padlock: VIA PadLock not detected. [ 41.432053] wlan0: no IPv6 routers present [ 169.409119] usb 1-1: USB disconnect, address 2 [ 169.844262] usb 1-1: new high speed USB device using ehci_hcd and address 6 [ 169.960540] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 170.732233] usb 1-1: new high speed USB device using ehci_hcd and address 7 [ 171.360463] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1603.985111] usb 1-1: new high speed USB device using ehci_hcd and address 8 [ 1605.311006] usb 1-1: configuration #1 chosen from 1 choice [ 1605.317144] scsi6 : SCSI emulation for USB Mass Storage devices [ 1605.317704] usb-storage: device found at 8 [ 1605.317711] usb-storage: waiting for device to settle before scanning [ 1610.317177] usb-storage: device scan complete [ 1610.317934] scsi 6:0:0:0: Direct-Access Generic USB Disk 9.02 PQ: 0 ANSI: 2 [ 1610.335118] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 1610.339630] sd 6:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1610.340528] sd 6:0:0:0: [sdb] Write Protect is off [ 1610.340540] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 1610.340547] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1610.342416] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1610.342435] sdb: sdb1 [ 1610.372891] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1610.372906] sd 6:0:0:0: [sdb] Attached SCSI disk [ 1846.103330] usb 1-1: USB disconnect, address 8 [ 1853.515441] CPU0 attaching NULL sched-domain. [ 1853.515456] CPU1 attaching NULL sched-domain. [ 1853.537266] CPU0 attaching sched-domain: [ 1853.537279] domain 0: span 0-1 level SIBLING [ 1853.537290] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 1853.537310] domain 1: span 0-1 level MC [ 1853.537319] groups: 0-1 (cpu_power = 1178) [ 1853.537337] CPU1 attaching sched-domain: [ 1853.537345] domain 0: span 0-1 level SIBLING [ 1853.537354] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 1853.537372] domain 1: span 0-1 level MC [ 1853.537381] groups: 0-1 (cpu_power = 1178) [ 2865.117899] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [ 2865.117947] ath9k: Unable to stop TxDMA. Reset HAL! [ 3509.338656] CPU0 attaching NULL sched-domain. [ 3509.338673] CPU1 attaching NULL sched-domain. [ 3509.361368] CPU0 attaching sched-domain: [ 3509.361382] domain 0: span 0-1 level SIBLING [ 3509.361392] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 3509.361413] domain 1: span 0-1 level MC [ 3509.361422] groups: 0-1 (cpu_power = 1178) [ 3509.361440] CPU1 attaching sched-domain: [ 3509.361447] domain 0: span 0-1 level SIBLING [ 3509.361456] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 3509.361475] domain 1: span 0-1 level MC [ 3509.361483] groups: 0-1 (cpu_power = 1178) [ 4189.165844] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [ 4189.165888] ath9k: Unable to stop TxDMA. Reset HAL! [ 5434.422873] [drm] Big FIFO is enabled [ 6460.288330] [drm] Big FIFO is enabled [ 7722.688105] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 7722.863707] usb 2-2: configuration #1 chosen from 1 choice [ 7723.050993] usbcore: registered new interface driver hiddev [ 7723.064486] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input9 [ 7723.065543] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2/input0 [ 7723.065630] usbcore: registered new interface driver usbhid [ 7723.065643] usbhid: v2.6:USB HID core driver [ 7765.940757] [drm] Big FIFO is enabled [ 7766.012244] [drm] Big FIFO is enabled [ 7766.012268] [drm] Big FIFO is enabled [ 7979.230504] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x00000020 [ 8010.245907] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [ 8010.245944] ath9k: Unable to stop TxDMA. Reset HAL! [ 8463.272822] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [ 8463.272860] ath9k: Unable to stop TxDMA. Reset HAL! [ 8860.472561] [drm] Big FIFO is enabled [ 8860.544183] [drm] Big FIFO is enabled [ 8860.544207] [drm] Big FIFO is enabled [ 8872.718560] CPU0 attaching NULL sched-domain. [ 8872.718572] CPU1 attaching NULL sched-domain. [ 8872.740225] CPU0 attaching sched-domain: [ 8872.740239] domain 0: span 0-1 level SIBLING [ 8872.740249] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 8872.740270] domain 1: span 0-1 level MC [ 8872.740279] groups: 0-1 (cpu_power = 1178) [ 8872.740296] CPU1 attaching sched-domain: [ 8872.740304] domain 0: span 0-1 level SIBLING [ 8872.740313] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 8872.740331] domain 1: span 0-1 level MC [ 8872.740340] groups: 0-1 (cpu_power = 1178) [ 8874.392223] wlan0: deauthenticating from 00:26:18:43:18:29 by local choice (reason=3) [ 8876.135818] PM: Syncing filesystems ... done. [ 8876.146749] PM: Preparing system for mem sleep [ 8876.146758] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 8876.148843] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 8876.149069] PM: Entering mem sleep [ 8876.149087] Suspending console(s) (use no_console_suspend to debug) [ 8876.187387] btusb_intr_complete: hci0 urb f502c800 failed to resubmit (1) [ 8876.188520] btusb_bulk_complete: hci0 urb f502c900 failed to resubmit (1) [ 8876.189392] btusb_bulk_complete: hci0 urb f502cb80 failed to resubmit (1) [ 8876.204238] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 8876.299871] sd 2:0:0:0: [sda] Stopping disk [ 8876.897108] PM: suspend of drv:sd dev:2:0:0:0 complete after 692.870 msecs [ 8877.319679] PM: suspend of drv:psmouse dev:serio4 complete after 391.351 msecs [ 8877.720220] PM: suspend of drv:atkbd dev:serio0 complete after 400.512 msecs [ 8877.722213] ath9k 0000:09:00.0: PCI INT A disabled [ 8877.784255] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 8877.784272] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 8877.784286] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 8877.784299] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 8877.784313] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 8877.889401] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 8877.889465] ACPI handle has no context! [ 8877.904236] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 119.901 msecs [ 8877.969509] PM: suspend of devices complete after 1820.117 msecs [ 8877.969517] PM: suspend devices took 1.820 seconds [ 8877.970027] r8169 0000:05:00.0: PME# enabled [ 8878.000345] PM: late suspend of devices complete after 30.818 msecs [ 8878.021105] ACPI: Preparing to enter system sleep state S3 [ 8878.085377] Disabling non-boot CPUs ... [ 8878.085406] CPU0 attaching NULL sched-domain. [ 8878.085414] CPU1 attaching NULL sched-domain. [ 8878.133033] CPU0 attaching NULL sched-domain. [ 8878.134213] Breaking affinity for irq 1 [ 8878.134266] Breaking affinity for irq 18 [ 8878.134274] Breaking affinity for irq 19 [ 8878.134285] Breaking affinity for irq 23 [ 8878.236024] CPU 1 is now offline [ 8878.236029] SMP alternatives: switching to UP code [ 8878.242452] Extended CMOS year: 2000 [ 8878.242452] Back to C! [ 8878.242452] CPU0: Thermal monitoring handled by SMI [ 8878.242452] Extended CMOS year: 2000 [ 8878.242452] Enabling non-boot CPUs ... [ 8878.242452] SMP alternatives: switching to SMP code [ 8878.248257] Booting processor 1 APIC 0x1 ip 0x6000 [ 8878.242452] Initializing CPU#1 [ 8878.242452] CPU: L1 I cache: 32K, L1 D cache: 24K [ 8878.242452] CPU: L2 cache: 512K [ 8878.242452] CPU: Physical Processor ID: 0 [ 8878.242452] CPU: Processor Core ID: 0 [ 8878.242452] CPU1: Thermal monitoring enabled (TM1) [ 8878.336084] CPU1: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a [ 8878.336196] CPU0 attaching NULL sched-domain. [ 8878.364036] CPU0 attaching sched-domain: [ 8878.364045] domain 0: span 0-1 level SIBLING [ 8878.364051] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 8878.364065] domain 1: span 0-1 level MC [ 8878.364072] groups: 0-1 (cpu_power = 1178) [ 8878.364083] CPU1 attaching sched-domain: [ 8878.364089] domain 0: span 0-1 level SIBLING [ 8878.364095] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 8878.364108] domain 1: span 0-1 level MC [ 8878.364114] groups: 0-1 (cpu_power = 1178) [ 8878.368044] CPU1 is up [ 8878.368379] ACPI: Waking up from system sleep state S3 [ 8888.992048] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 8888.992072] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.DSSV] (Node f7018f78), AE_TIME [ 8888.992152] ACPI Error (psparse-0537): Method parse/execution failed [\_WAK] (Node f7018030), AE_TIME [ 8888.992354] ACPI Exception: AE_TIME, During Method _WAK (20090903/hwsleep-601) [ 8889.029318] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 8889.029408] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xf0500004, writing 0x40600004) [ 8889.029421] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 8889.029434] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100102) [ 8889.029482] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b) [ 8889.029502] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf051f051) [ 8889.029514] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x40304000) [ 8889.029526] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 8889.029543] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) [ 8889.029557] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 8889.029625] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40303) [ 8889.029645] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x40514041) [ 8889.029657] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xf010f010) [ 8889.029669] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 8889.029686] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) [ 8889.029700] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 8889.029780] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 8889.029830] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 8889.029878] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 8889.029927] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 8889.029980] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0xf0504000, writing 0x40604000) [ 8889.029996] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 8889.030045] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 8889.030057] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 8889.030154] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 8889.030174] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0xf0504400, writing 0x40604400) [ 8889.030198] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 8889.030318] r8169 0000:05:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 8889.030345] r8169 0000:05:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xf051000c) [ 8889.030361] r8169 0000:05:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xf052000c) [ 8889.030376] r8169 0000:05:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001) [ 8889.030388] r8169 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 8889.030404] r8169 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100507) [ 8889.030533] ath9k 0000:09:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 8889.030582] ath9k 0000:09:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0100004) [ 8889.030597] ath9k 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 8889.030615] ath9k 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106) [ 8889.031052] PM: early resume of devices complete after 1.886 msecs [ 8889.051323] i915 0000:00:02.0: setting latency timer to 64 [ 8889.052967] [drm] Big FIFO is enabled [ 8889.120205] [drm] Big FIFO is enabled [ 8889.120218] [drm] Big FIFO is enabled [ 8889.120331] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8889.120342] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8889.120397] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8889.120407] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8889.120435] usb usb2: root hub lost power or was reset [ 8889.120478] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 8889.120488] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8889.120513] usb usb3: root hub lost power or was reset [ 8889.120550] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8889.120560] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8889.120586] usb usb4: root hub lost power or was reset [ 8889.120612] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 8889.120622] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 8889.120648] usb usb5: root hub lost power or was reset [ 8889.120676] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8889.120686] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8889.120722] pci 0000:00:1e.0: setting latency timer to 64 [ 8889.120746] ahci 0000:00:1f.2: setting latency timer to 64 [ 8889.120836] r8169 0000:05:00.0: PME# disabled [ 8889.120864] ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8889.372211] PM: resume of drv:usb dev:usb1 complete after 250.772 msecs [ 8889.440235] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8889.440242] ata1: SATA link down (SStatus 0 SControl 300) [ 8889.485643] ata2.00: configured for UDMA/133 [ 8889.620057] PM: resume of drv:usb dev:usb2 complete after 247.818 msecs [ 8889.868208] PM: resume of drv:usb dev:usb3 complete after 248.122 msecs [ 8889.980210] usb 1-7: reset high speed USB device using ehci_hcd and address 4 [ 8890.120343] PM: resume of drv:usb dev:1-7 complete after 250.348 msecs [ 8890.232208] usb 1-8: reset high speed USB device using ehci_hcd and address 5 [ 8890.368838] PM: resume of drv:usb dev:1-8 complete after 248.468 msecs [ 8890.368861] sd 2:0:0:0: [sda] Starting disk [ 8890.512206] usb 3-2: reset full speed USB device using uhci_hcd and address 2 [ 8890.721329] btusb 3-2:1.0: no reset_resume for driver btusb? [ 8890.721335] btusb 3-2:1.1: no reset_resume for driver btusb? [ 8890.972373] PM: resume of drv:usb dev:3-2 complete after 570.525 msecs [ 8891.236214] usb 2-2: reset low speed USB device using uhci_hcd and address 2 [ 8891.541366] PM: resume of drv:usb dev:2-2 complete after 564.362 msecs [ 8891.541399] PM: resume of devices complete after 2510.304 msecs [ 8891.541901] PM: resume devices took 2.512 seconds [ 8891.541976] PM: Finishing wakeup. [ 8891.541980] Restarting tasks ... done. [ 8892.716135] r8169: eth0: link down [ 8892.716824] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8892.755173] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8893.607693] CPU0 attaching NULL sched-domain. [ 8893.607705] CPU1 attaching NULL sched-domain. [ 8893.628179] CPU0 attaching sched-domain: [ 8893.628193] domain 0: span 0-1 level SIBLING [ 8893.628204] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 8893.628224] domain 1: span 0-1 level MC [ 8893.628233] groups: 0-1 (cpu_power = 1178) [ 8893.628250] CPU1 attaching sched-domain: [ 8893.628258] domain 0: span 0-1 level SIBLING [ 8893.628267] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 8893.628285] domain 1: span 0-1 level MC [ 8893.628293] groups: 0-1 (cpu_power = 1178) [ 8898.962164] wlan0: deauthenticating from 00:26:18:43:18:29 by local choice (reason=3) [ 8899.161907] wlan0: direct probe to AP 00:26:18:43:18:29 (try 1) [ 8899.361096] wlan0: direct probe to AP 00:26:18:43:18:29 (try 2) [ 8899.364343] wlan0: direct probe responded [ 8899.364361] wlan0: authenticate with AP 00:26:18:43:18:29 (try 1) [ 8899.366530] wlan0: authenticated [ 8899.366610] wlan0: associate with AP 00:26:18:43:18:29 (try 1) [ 8899.369198] wlan0: RX AssocResp from 00:26:18:43:18:29 (capab=0x411 status=0 aid=1) [ 8899.369210] wlan0: associated [ 8899.370130] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 8904.369096] [drm] Big FIFO is enabled [ 8904.444077] [drm] Big FIFO is enabled [ 8904.444102] [drm] Big FIFO is enabled [ 8910.132030] wlan0: no IPv6 routers present [ 8934.737873] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [ 8934.737911] ath9k: Unable to stop TxDMA. Reset HAL! [ 9210.769031] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [ 9210.769083] ath9k: Unable to stop TxDMA. Reset HAL! [ 9457.806202] ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x00000020 [ 9769.501016] No probe response from AP 00:26:18:43:18:29 after 500ms, disconnecting. [ 9770.647907] wlan0: direct probe to AP 00:26:18:43:18:29 (try 1) [ 9770.650465] wlan0: direct probe responded [ 9770.650478] wlan0: authenticate with AP 00:26:18:43:18:29 (try 1) [ 9770.652879] wlan0: authenticated [ 9770.652935] wlan0: associate with AP 00:26:18:43:18:29 (try 1) [ 9770.655504] wlan0: RX AssocResp from 00:26:18:43:18:29 (capab=0x11 status=0 aid=1) [ 9770.655515] wlan0: associated [10166.824801] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [10166.824841] ath9k: Unable to stop TxDMA. Reset HAL! [11217.925061] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [11217.925094] ath9k: Unable to stop TxDMA. Reset HAL! [11459.949821] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [11459.949864] ath9k: Unable to stop TxDMA. Reset HAL! [12907.984928] ath9k: Failed to stop TX DMA in 100 msec after killing last frame [12907.984984] ath9k: Unable to stop TxDMA. Reset HAL! [13025.901600] [drm] Big FIFO is enabled [13025.972338] [drm] Big FIFO is enabled [13025.972361] [drm] Big FIFO is enabled