[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-28-generic (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 23:42:43 UTC 2011 (Ubuntu 2.6.32-28.55-generic 2.6.32.27+drm33.12) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-28-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098400 (usable) [ 0.000000] BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fedf800 (usable) [ 0.000000] BIOS-e820: 000000007fedf800 - 000000007fee0000 (reserved) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fedf max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000098400 (usable) [ 0.000000] modified: 0000000000098400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fedf800 (usable) [ 0.000000] modified: 000000007fedf800 - 000000007fee0000 (reserved) [ 0.000000] modified: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] modified: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] modified: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fedf000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fedf000 page 4k [ 0.000000] kernel direct mapping tables up to 7fedf000 @ 10000-14000 [ 0.000000] RAMDISK: 377ae000 - 37fef33e [ 0.000000] ACPI: RSDP 00000000000f82b0 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000007fee30c0 0005C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007fee7a80 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000007fee3280 04791 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 000000007fee0000 00040 [ 0.000000] ACPI: SLIC 000000007fee7cc0 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: HPET 000000007fee7e80 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 000000007fee7f00 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000007fee7bc0 00084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 000000007fee7f80 0015C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 000000007fee8410 00275 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fedf000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fedf000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000026fdf] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fedf000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a30a64] TEXT DATA BSS ==> [0001000000 - 0001a30a64] [ 0.000000] #3 [00377ae000 - 0037fef33e] RAMDISK ==> [00377ae000 - 0037fef33e] [ 0.000000] #4 [0000098400 - 0000100000] BIOS reserved ==> [0000098400 - 0000100000] [ 0.000000] #5 [0001a31000 - 0001a31740] BRK ==> [0001a31000 - 0001a31740] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000f5ee0] f5ee0 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000098 [ 0.000000] 0: 0x00000100 -> 0x0007fedf [ 0.000000] On node 0 totalpages: 523879 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 108 pages reserved [ 0.000000] DMA zone: 3812 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7109 pages used for memmap [ 0.000000] DMA32 zone: 512794 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 0000000000099000 [ 0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516606 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-28-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2047304k/2095996k available (5425k kernel code, 480k absent, 48212k reserved, 2977k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2133.542 MHz processor. [ 0.010008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4267.08 BogoMIPS (lpj=21335420) [ 0.010037] Security Framework initialized [ 0.010059] AppArmor: AppArmor initialized [ 0.010270] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011459] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.012150] Mount-cache hash table entries: 256 [ 0.012322] Initializing cgroup subsys ns [ 0.012328] Initializing cgroup subsys cpuacct [ 0.012332] Initializing cgroup subsys memory [ 0.012341] Initializing cgroup subsys devices [ 0.012344] Initializing cgroup subsys freezer [ 0.012346] Initializing cgroup subsys net_cls [ 0.012371] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.012373] CPU: L2 cache: 2048K [ 0.012377] CPU 0/0x0 -> Node 0 [ 0.012379] CPU: Physical Processor ID: 0 [ 0.012381] CPU: Processor Core ID: 0 [ 0.012385] mce: CPU supports 6 MCE banks [ 0.012394] CPU0: Thermal monitoring enabled (TM1) [ 0.012400] using mwait in idle threads. [ 0.012402] Performance Events: Core2 events, Intel PMU driver. [ 0.012409] ... version: 2 [ 0.012410] ... bit width: 40 [ 0.012412] ... generic registers: 2 [ 0.012414] ... value mask: 000000ffffffffff [ 0.012416] ... max period: 000000007fffffff [ 0.012417] ... fixed-purpose events: 3 [ 0.012419] ... event mask: 0000000700000003 [ 0.014958] ACPI: Core revision 20090903 [ 0.030022] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030031] ftrace: allocating 22545 entries in 89 pages [ 0.040065] Setting APIC routing to flat [ 0.040373] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.140869] CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.020000] CPU: L2 cache: 2048K [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] CPU1: Thermal monitoring enabled (TM1) [ 0.300104] CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 [ 0.300111] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.310021] Brought up 2 CPUs [ 0.310024] Total of 2 processors activated (8535.00 BogoMIPS). [ 0.310455] CPU0 attaching sched-domain: [ 0.310459] domain 0: span 0-1 level MC [ 0.310462] groups: 0 1 [ 0.310467] CPU1 attaching sched-domain: [ 0.310469] domain 0: span 0-1 level MC [ 0.310472] groups: 1 0 [ 0.310540] devtmpfs: initialized [ 0.310540] regulator: core version 0.5 [ 0.310540] Time: 13:33:23 Date: 04/30/11 [ 0.310540] NET: Registered protocol family 16 [ 0.310540] Trying to unpack rootfs image as initramfs... [ 0.310540] ACPI: bus type pci registered [ 0.310540] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.310540] PCI: MCFG area at f0000000 reserved in E820 [ 0.311020] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.311022] PCI: Using configuration type 1 for base access [ 0.320188] bio: create slab at 0 [ 0.320905] ACPI: EC: Look up EC in DSDT [ 0.326868] ACPI: Interpreter enabled [ 0.326873] ACPI: (supports S0 S1 S3 S4 S5) [ 0.326903] ACPI: Using IOAPIC for interrupt routing [ 0.331104] ACPI: No dock devices found. [ 0.331205] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.331314] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.331318] pci 0000:00:01.0: PME# disabled [ 0.331377] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.331417] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.331421] pci 0000:00:1b.0: PME# disabled [ 0.331462] pci 0000:00:1d.0: reg 20 io port: [0xff00-0xff1f] [ 0.331508] pci 0000:00:1d.1: reg 20 io port: [0xfe00-0xfe1f] [ 0.331556] pci 0000:00:1d.2: reg 20 io port: [0xfd00-0xfd1f] [ 0.331602] pci 0000:00:1d.3: reg 20 io port: [0xfc00-0xfc1f] [ 0.331646] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] [ 0.331690] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.331694] pci 0000:00:1d.7: PME# disabled [ 0.331843] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.331850] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.331856] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.331862] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.331868] pci 0000:00:1f.1: reg 20 io port: [0xfb00-0xfb0f] [ 0.331911] pci 0000:00:1f.2: reg 10 io port: [0xfa00-0xfa07] [ 0.331916] pci 0000:00:1f.2: reg 14 io port: [0xf900-0xf903] [ 0.331922] pci 0000:00:1f.2: reg 18 io port: [0xf800-0xf807] [ 0.331927] pci 0000:00:1f.2: reg 1c io port: [0xf700-0xf703] [ 0.331933] pci 0000:00:1f.2: reg 20 io port: [0xf600-0xf60f] [ 0.331938] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff] [ 0.331961] pci 0000:00:1f.2: PME# supported from D3hot [ 0.331965] pci 0000:00:1f.2: PME# disabled [ 0.332009] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.332059] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.332067] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.332075] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff] [ 0.332084] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfcfe0000-0xfcffffff] [ 0.332142] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfcffffff] [ 0.332146] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.332180] pci 0000:02:01.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff] [ 0.332225] pci 0000:02:01.0: supports D1 D2 [ 0.332227] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot [ 0.332231] pci 0000:02:01.0: PME# disabled [ 0.332254] pci 0000:02:03.0: reg 10 32bit mmio: [0xfdefa000-0xfdefbfff] [ 0.332315] pci 0000:02:04.0: reg 10 32bit mmio: [0xfdefe000-0xfdefe7ff] [ 0.332360] pci 0000:02:04.0: supports D1 D2 [ 0.332397] pci 0000:02:08.0: reg 10 32bit mmio: [0xfdefd000-0xfdefdfff] [ 0.332404] pci 0000:02:08.0: reg 14 io port: [0xef00-0xef3f] [ 0.332443] pci 0000:02:08.0: supports D1 D2 [ 0.332445] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332449] pci 0000:02:08.0: PME# disabled [ 0.332486] pci 0000:00:1e.0: transparent bridge [ 0.332489] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.332493] pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.332509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.332661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.343961] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.344069] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.344175] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.344281] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.344385] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.344489] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.344596] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.344702] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 0.344840] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.344845] vgaarb: loaded [ 0.344959] SCSI subsystem initialized [ 0.345069] libata version 3.00 loaded. [ 0.345147] usbcore: registered new interface driver usbfs [ 0.345163] usbcore: registered new interface driver hub [ 0.345192] usbcore: registered new device driver usb [ 0.345314] ACPI: WMI: Mapper loaded [ 0.345316] PCI: Using ACPI for IRQ routing [ 0.345478] NetLabel: Initializing [ 0.345480] NetLabel: domain hash size = 128 [ 0.345481] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.345495] NetLabel: unlabeled traffic allowed by default [ 0.345529] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.345534] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.350245] Switching to clocksource tsc [ 0.351843] AppArmor: AppArmor Filesystem Enabled [ 0.351863] pnp: PnP ACPI init [ 0.351882] ACPI: bus type pnp registered [ 0.353726] pnp: PnP ACPI: found 11 devices [ 0.353728] ACPI: ACPI bus type pnp unregistered [ 0.353742] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.353746] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.353748] system 00:01: ioport range 0x294-0x297 has been reserved [ 0.353751] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.353761] system 00:07: ioport range 0x400-0x4bf has been reserved [ 0.353767] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.353773] system 00:0a: iomem range 0xd4800-0xd7fff has been reserved [ 0.353776] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved [ 0.353779] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [ 0.353781] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [ 0.353784] system 00:0a: iomem range 0xfed00000-0xfed000ff has been reserved [ 0.353787] system 00:0a: iomem range 0x7fee0000-0x7fefffff could not be reserved [ 0.353790] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.353793] system 00:0a: iomem range 0x100000-0x7fedffff could not be reserved [ 0.353796] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.353798] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.353801] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.353804] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved [ 0.353806] system 00:0a: iomem range 0xe0000-0xeffff has been reserved [ 0.358523] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.358525] pci 0000:00:01.0: IO window: disabled [ 0.358529] pci 0000:00:01.0: MEM window: 0xfa000000-0xfcffffff [ 0.358533] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.358538] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.358540] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.358545] pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff [ 0.358549] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.358562] alloc irq_desc for 16 on node -1 [ 0.358564] alloc kstat_irqs on node -1 [ 0.358569] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.358574] pci 0000:00:01.0: setting latency timer to 64 [ 0.358580] pci 0000:00:1e.0: setting latency timer to 64 [ 0.358585] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.358587] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.358590] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff] [ 0.358592] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.358595] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.358597] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.358599] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.358601] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.358643] NET: Registered protocol family 2 [ 0.358786] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.359577] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.362084] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.362762] TCP: Hash tables configured (established 262144 bind 65536) [ 0.362765] TCP reno registered [ 0.362908] NET: Registered protocol family 1 [ 0.363028] pci 0000:01:00.0: Boot video device [ 0.363043] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.363288] Scanning for low memory corruption every 60 seconds [ 0.363445] audit: initializing netlink socket (disabled) [ 0.363458] type=2000 audit(1304170402.359:1): initialized [ 0.372972] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.374375] VFS: Disk quotas dquot_6.5.2 [ 0.374426] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.375034] fuse init (API version 7.13) [ 0.375115] msgmni has been set to 3998 [ 0.375326] alg: No test for stdrng (krng) [ 0.375381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.375384] io scheduler noop registered [ 0.375385] io scheduler anticipatory registered [ 0.375387] io scheduler deadline registered [ 0.375420] io scheduler cfq registered (default) [ 0.375555] alloc irq_desc for 24 on node -1 [ 0.375557] alloc kstat_irqs on node -1 [ 0.375566] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.375572] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.375638] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.375660] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.375761] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.375765] ACPI: Power Button [PWRB] [ 0.375822] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.375825] ACPI: Power Button [PWRF] [ 0.375874] fan PNP0C0B:00: registered as cooling_device0 [ 0.375879] ACPI: Fan [FAN] (on) [ 0.376165] processor LNXCPU:00: registered as cooling_device1 [ 0.376352] ACPI: SSDT 000000007fee8380 00087 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.376539] processor LNXCPU:01: registered as cooling_device2 [ 0.378538] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.378546] ACPI: Thermal Zone [THRM] (-271 C) [ 0.379985] Linux agpgart interface v0.103 [ 0.380024] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.381245] brd: module loaded [ 0.381711] loop: module loaded [ 0.381790] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.381894] ata_piix 0000:00:1f.1: version 2.13 [ 0.381908] alloc irq_desc for 18 on node -1 [ 0.381910] alloc kstat_irqs on node -1 [ 0.381918] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.381953] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.382057] scsi0 : ata_piix [ 0.382130] scsi1 : ata_piix [ 0.382519] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14 [ 0.382522] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15 [ 0.382856] Fixed MDIO Bus: probed [ 0.382895] PPP generic driver version 2.4.2 [ 0.382933] tun: Universal TUN/TAP device driver, 1.6 [ 0.382935] tun: (C) 1999-2004 Max Krasnyansky [ 0.383023] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.383040] alloc irq_desc for 23 on node -1 [ 0.383042] alloc kstat_irqs on node -1 [ 0.383047] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.383062] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.383065] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.383098] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.383118] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.386990] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.387005] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 [ 0.391068] ata2: port disabled. ignoring. [ 0.409345] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.409491] usb usb1: configuration #1 chosen from 1 choice [ 0.409525] hub 1-0:1.0: USB hub found [ 0.409535] hub 1-0:1.0: 8 ports detected [ 0.409607] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.409625] uhci_hcd: USB Universal Host Controller Interface driver [ 0.409674] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.409684] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.409687] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.409721] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.409748] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00 [ 0.409835] usb usb2: configuration #1 chosen from 1 choice [ 0.409859] hub 2-0:1.0: USB hub found [ 0.409865] hub 2-0:1.0: 2 ports detected [ 0.409908] alloc irq_desc for 19 on node -1 [ 0.409910] alloc kstat_irqs on node -1 [ 0.409917] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.409922] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.409925] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.409957] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.409988] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00 [ 0.410066] usb usb3: configuration #1 chosen from 1 choice [ 0.410094] hub 3-0:1.0: USB hub found [ 0.410100] hub 3-0:1.0: 2 ports detected [ 0.410138] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.410144] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.410147] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.410178] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.410209] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00 [ 0.410291] usb usb4: configuration #1 chosen from 1 choice [ 0.410314] hub 4-0:1.0: USB hub found [ 0.410322] hub 4-0:1.0: 2 ports detected [ 0.410365] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.410370] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.410374] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.410411] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.410443] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00 [ 0.410522] usb usb5: configuration #1 chosen from 1 choice [ 0.410546] hub 5-0:1.0: USB hub found [ 0.410552] hub 5-0:1.0: 2 ports detected [ 0.410645] PNP: No PS/2 controller found. Probing ports directly. [ 0.413097] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.413105] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.413235] mice: PS/2 mouse device common for all mice [ 0.413346] rtc_cmos 00:04: RTC can wake from S4 [ 0.413386] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.413410] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.413539] device-mapper: uevent: version 1.0.3 [ 0.413654] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.413722] device-mapper: multipath: version 1.1.0 loaded [ 0.413725] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.413882] cpuidle: using governor ladder [ 0.413884] cpuidle: using governor menu [ 0.414216] TCP cubic registered [ 0.414359] NET: Registered protocol family 10 [ 0.414796] lo: Disabled Privacy Extensions [ 0.415063] NET: Registered protocol family 17 [ 0.417237] PM: Resume from disk failed. [ 0.417250] registered taskstats version 1 [ 0.417499] Magic number: 7:649:585 [ 0.417574] rtc_cmos 00:04: setting system clock to 2011-04-30 13:33:23 UTC (1304170403) [ 0.417577] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.417579] EDD information not available. [ 0.502839] Freeing initrd memory: 8452k freed [ 0.560876] Freeing unused kernel memory: 880k freed [ 0.561235] Write protecting the kernel read-only data: 7700k [ 0.575869] udev: starting version 151 [ 0.633861] ahci 0000:00:1f.2: version 3.0 [ 0.633881] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.633916] alloc irq_desc for 25 on node -1 [ 0.633918] alloc kstat_irqs on node -1 [ 0.633928] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X [ 0.633985] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode [ 0.633989] ahci 0000:00:1f.2: flags: 64bit ncq led clo [ 0.633993] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.665166] scsi2 : ahci [ 0.667274] scsi3 : ahci [ 0.670081] scsi4 : ahci [ 0.670735] scsi5 : ahci [ 0.670876] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 25 [ 0.670880] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 25 [ 0.670883] ata5: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 25 [ 0.670885] ata6: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 25 [ 0.674054] b43-pci-bridge 0000:02:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.790185] ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0 [ 0.850005] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 1.002297] usb 1-5: configuration #1 chosen from 1 choice [ 1.008476] Initializing USB Mass Storage driver... [ 1.008602] scsi6 : SCSI emulation for USB Mass Storage devices [ 1.008682] usb-storage: device found at 4 [ 1.008684] usb-storage: waiting for device to settle before scanning [ 1.008695] usbcore: registered new interface driver usb-storage [ 1.008698] USB Mass Storage support registered. [ 1.020456] ata5: SATA link down (SStatus 0 SControl 300) [ 1.020481] ata6: SATA link down (SStatus 0 SControl 300) [ 1.020493] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.020507] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.024522] ata3.00: ATA-7: SAMSUNG HD400LJ, ZZ100-15, max UDMA7 [ 1.024526] ata3.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.028627] ata3.00: configured for UDMA/133 [ 1.028760] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD400LJ ZZ10 PQ: 0 ANSI: 5 [ 1.028936] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.028983] sd 2:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB) [ 1.029054] sd 2:0:0:0: [sda] Write Protect is off [ 1.029057] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.029080] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.029215] sda: sda1 sda2 [ 1.040967] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.113489] ata4.00: ATAPI: HL-DT-STDVDRRW GSA-H30L, S655, max UDMA/33 [ 1.116130] ata4.00: configured for UDMA/33 [ 1.120509] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-H30L S655 PQ: 0 ANSI: 5 [ 1.127535] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.127539] Uniform CD-ROM driver Revision: 3.20 [ 1.127645] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.127710] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.132583] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.132586] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.132632] alloc irq_desc for 20 on node -1 [ 1.132635] alloc kstat_irqs on node -1 [ 1.132642] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.155984] e100 0000:02:08.0: PME# disabled [ 1.156532] e100: eth0: e100_probe: addr 0xfdefd000, irq 20, MAC addr 00:11:2f:fd:52:38 [ 1.156576] ohci1394 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.212173] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [ 1.281314] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 1.457356] usb 3-1: configuration #1 chosen from 1 choice [ 1.468854] usbcore: registered new interface driver hiddev [ 1.483600] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3 [ 1.483704] generic-usb 0003:046D:C001.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1/input0 [ 1.483728] usbcore: registered new interface driver usbhid [ 1.483731] usbhid: v2.6:USB HID core driver [ 1.740288] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 1.962188] EXT4-fs (loop0): mounted filesystem with ordered data mode [ 2.002488] usb 3-2: configuration #1 chosen from 1 choice [ 2.053750] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4 [ 2.053839] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.1-2/input0 [ 2.146527] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input5 [ 2.146650] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.1-2/input1 [ 2.540354] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800010c25ce] [ 6.000233] usb-storage: device scan complete [ 6.000820] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 6.001445] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 6.002068] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 6.002693] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 6.003180] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 6.003314] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 6.003451] sd 6:0:0:2: Attached scsi generic sg4 type 0 [ 6.003588] sd 6:0:0:3: Attached scsi generic sg5 type 0 [ 6.006305] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 6.006929] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 6.007554] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 6.008179] sd 6:0:0:3: [sde] Attached SCSI removable disk [ 11.600407] udev: starting version 151 [ 12.020608] type=1505 audit(1304166815.102:2): operation="profile_load" pid=643 name="/sbin/dhclient3" [ 12.020836] lp: driver loaded but no devices found [ 12.021286] type=1505 audit(1304166815.102:3): operation="profile_load" pid=643 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.021658] type=1505 audit(1304166815.102:4): operation="profile_load" pid=643 name="/usr/lib/connman/scripts/dhclient-script" [ 12.022230] type=1505 audit(1304166815.102:5): operation="profile_replace" pid=570 name="/sbin/dhclient3" [ 12.023005] type=1505 audit(1304166815.102:6): operation="profile_replace" pid=570 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.023378] type=1505 audit(1304166815.102:7): operation="profile_replace" pid=570 name="/usr/lib/connman/scripts/dhclient-script" [ 12.041688] vga16fb: initializing [ 12.041692] vga16fb: mapped to 0xffff8800000a0000 [ 12.041757] fb0: VGA16 VGA frame buffer device [ 12.096195] cfg80211: Calling CRDA to update world regulatory domain [ 12.190620] cfg80211: World regulatory domain updated: [ 12.190624] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.190627] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.190630] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.190632] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.190635] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.190637] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.387411] Linux video capture interface: v2.00 [ 12.622540] Console: switching to colour frame buffer device 80x30 [ 12.661763] b43-phy0: Broadcom 4318 WLAN found (core revision 9) [ 12.708838] saa7130/34: v4l2 driver version 0.2.15 loaded [ 12.708893] saa7134 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.708900] saa7133[0]: found at 0000:02:04.0, rev: 209, irq: 16, latency: 32, mmio: 0xfdefe000 [ 12.708909] saa7133[0]: subsystem: 1043:4871, board: ASUS P7131 4871 [card=111,autodetected] [ 12.708934] saa7133[0]: board init: gpio is 0 [ 12.708942] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 12.856180] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.856204] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.900029] saa7133[0]: i2c eeprom 00: 43 10 71 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 12.900040] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 12.900049] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 00 01 03 08 ff 00 cf ff ff ff ff [ 12.900058] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.900067] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 22 15 50 ff ff ff ff ff ff [ 12.900076] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.900085] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.900094] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.900103] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.900112] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.900121] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.900130] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.900139] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.900148] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.900157] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.900166] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 12.900177] i2c i2c-0: Invalid 7-bit address 0x7a [ 12.927185] phy0: Selected rate control algorithm 'minstrel' [ 12.927840] Registered led device: b43-phy0::tx [ 12.927863] Registered led device: b43-phy0::rx [ 12.927883] Registered led device: b43-phy0::radio [ 12.927956] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 13.046429] hda_codec: ALC888: BIOS auto-probing. [ 13.047789] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 13.140096] tuner 0-004b: chip found @ 0x96 (saa7133[0]) [ 13.301259] tda829x 0-004b: setting tuner address to 61 [ 13.441261] tda829x 0-004b: type set to tda8290+75a [ 13.579249] Adding 261112k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261112k [ 13.747859] type=1505 audit(1304166816.822:8): operation="profile_load" pid=831 name="/usr/share/gdm/guest-session/Xsession" [ 13.749244] type=1505 audit(1304166816.822:9): operation="profile_replace" pid=832 name="/sbin/dhclient3" [ 13.749925] type=1505 audit(1304166816.822:10): operation="profile_replace" pid=832 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.750957] type=1505 audit(1304166816.832:11): operation="profile_replace" pid=832 name="/usr/lib/connman/scripts/dhclient-script" [ 13.830094] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 13.842550] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw [ 13.845872] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 13.845878] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 13.845881] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 13.862506] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.871400] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 13.881768] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.940076] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 13.943506] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw [ 13.951090] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 13.951095] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 13.951098] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 14.302972] ppdev: user-space parallel port driver [ 14.498765] CPU0 attaching NULL sched-domain. [ 14.498771] CPU1 attaching NULL sched-domain. [ 14.541372] CPU0 attaching sched-domain: [ 14.541376] domain 0: span 0-1 level MC [ 14.541380] groups: 0 1 [ 14.541386] CPU1 attaching sched-domain: [ 14.541389] domain 0: span 0-1 level MC [ 14.541392] groups: 1 0 [ 19.041610] saa7133[0]: dsp access error [ 19.041614] saa7133[0]: dsp access error [ 19.170210] saa7133[0]: registered device video0 [v4l2] [ 19.170259] saa7133[0]: registered device vbi0 [ 19.192818] saa7134 ALSA driver for DMA sound loaded [ 19.192833] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 19.192858] saa7133[0]/alsa: saa7133[0] at 0xfdefe000 irq 16 registered as card -2 [ 19.268361] dvb_init() allocating 1 frontend [ 19.451438] DVB: registering new adapter (saa7133[0]) [ 19.451444] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... [ 19.790063] tda1004x: setting up plls for 48MHz sampling clock [ 22.490093] tda1004x: timeout waiting for DSP ready [ 22.578473] [drm] Initialized drm 1.1.0 20060810 [ 22.600057] tda1004x: found firmware revision 0 -- invalid [ 22.600060] tda1004x: trying to boot from eeprom [ 22.628068] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 22.628075] nouveau 0000:01:00.0: setting latency timer to 64 [ 22.631892] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046d00a3) [ 22.632101] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 22.831616] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 22.831621] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 22.831623] [drm] nouveau 0000:01:00.0: Bios version 05.72.22.43 [ 22.831626] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed [ 22.831628] [drm] nouveau 0000:01:00.0: BIT table 'd' not found [ 22.831631] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0 [ 22.831634] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2 [ 22.831637] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 22.831639] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [ 22.831642] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 22.831644] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 22.831647] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 22.831649] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028 [ 22.831652] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000000 [ 22.831654] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011310 00000028 [ 22.831656] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 00a0c030 [ 22.831663] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE0F0 [ 22.831710] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE41F [ 23.010285] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9BD [ 23.010305] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB38 [ 23.030178] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED91 [ 23.040414] [TTM] Zone kernel: Available graphics memory: 1028320 kiB. [ 23.040424] [drm] nouveau 0000:01:00.0: 256 MiB VRAM [ 23.041829] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 23.042471] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 23.043264] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 23.043271] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 23.043319] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 23.043377] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 23.043404] [drm] nouveau 0000:01:00.0: Detected a TV connector [ 23.045422] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 23.045426] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 23.045429] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 23.045431] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 23.290204] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x49000, bo ffff880044970e00 [ 23.290294] fb1: nouveaufb frame buffer device [ 23.290296] registered panic notifier [ 23.290301] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 23.981624] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 23.982406] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 23.995251] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [ 23.995256] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B [ 24.811260] eth0: no IPv6 routers present [ 24.971308] tda1004x: timeout waiting for DSP ready [ 25.080013] tda1004x: found firmware revision 0 -- invalid [ 25.080015] tda1004x: waiting for firmware upload... [ 25.080020] saa7134 0000:02:04.0: firmware: requesting dvb-fe-tda10046.fw [ 25.086022] saa7134 0000:02:04.0: firmware: requesting dvb-fe-tda10045.fw [ 25.088544] tda1004x: no firmware upload (timeout or file not found?) [ 25.088549] tda1004x: firmware upload failed [ 26.470551] CPU0 attaching NULL sched-domain. [ 26.470557] CPU1 attaching NULL sched-domain. [ 26.530142] CPU0 attaching sched-domain: [ 26.530145] domain 0: span 0-1 level MC [ 26.530148] groups: 0 1 [ 26.530154] CPU1 attaching sched-domain: [ 26.530156] domain 0: span 0-1 level MC [ 26.530158] groups: 1 0 [ 734.661474] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 734.684789] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [ 734.684795] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B [ 754.194819] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 754.223944] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [ 754.223949] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B [ 760.880989] __ratelimit: 18 callbacks suppressed [ 760.880996] glxinfo[2398]: segfault at 0 ip 000000000040309a sp 00007fffa94752f0 error 4 in glxinfo[400000+5000] [ 1438.352795] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 1438.375532] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [ 1438.375537] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B [ 1446.210816] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 1446.240413] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [ 1446.240420] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B [ 1549.016112] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 1549.039722] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [ 1549.039728] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B [ 1558.234211] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 1558.263327] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [ 1558.263332] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B [ 1605.371513] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 1605.394239] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [ 1605.394245] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B [ 1612.823587] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 1612.852536] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [ 1612.852543] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output B