[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-27-generic (buildd@roseapple) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #49-Ubuntu SMP Wed Dec 1 23:52:12 UTC 2010 (Ubuntu 2.6.32-27.49-generic 2.6.32.26+drm33.12) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) [ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000000fff0000 (usable) [ 0.000000] modified: 000000000fff0000 - 000000000fff8000 (ACPI data) [ 0.000000] modified: 000000000fff8000 - 0000000010000000 (ACPI NVS) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000000fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 000fc00000 page 2M [ 0.000000] 000fc00000 - 000fff0000 page 4k [ 0.000000] kernel direct mapping tables up to fff0000 @ 10000-15000 [ 0.000000] RAMDISK: 0b89b000 - 0c03375b [ 0.000000] ACPI: RSDP 000fb100 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 0fff0000 00028 (v01 AMIINT VIA_P6 00000010 MSFT 00000097) [ 0.000000] ACPI: FACP 0fff0030 00081 (v01 AMIINT VIA_P6 00000011 MSFT 00000097) [ 0.000000] ACPI: DSDT 0fff00c0 0307A (v01 VIA P4X266 00001000 INTL 02002024) [ 0.000000] ACPI: FACS 0fff8000 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fff0000 [ 0.000000] low ram: 0 - 0fff0000 [ 0.000000] node 0 low ram: 00000000 - 0fff0000 [ 0.000000] node 0 bootmap 00011000 - 00013000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8] [ 0.000000] #4 [000b89b000 - 000c03375b] RAMDISK ==> [000b89b000 - 000c03375b] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008dd000 - 00008e0294] BRK ==> [00008dd000 - 00008e0294] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - 0000013000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000fff0 [ 0.000000] HighMem 0x0000fff0 -> 0x0000fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0000fff0 [ 0.000000] On node 0 totalpages: 65407 [ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 480 pages used for memmap [ 0.000000] Normal zone: 60944 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64895 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-27-generic root=UUID=58bbe9aa-f635-43f1-853a-d4fd7b0351c2 ro quiet splash [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 1310080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 241828k/262080k available (4682k kernel code, 19472k reserved, 2120k data, 656k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd07f0000 - 0xff7fe000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB) [ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB) [ 0.000000] .data : 0xc0592a37 - 0xc07a4ce8 (2120 kB) [ 0.000000] .text : 0xc0100000 - 0xc0592a37 (4682 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1791.217 MHz processor. [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3582.43 BogoMIPS (lpj=7164868) [ 0.004043] Security Framework initialized [ 0.004085] AppArmor: AppArmor initialized [ 0.004100] Mount-cache hash table entries: 512 [ 0.004347] Initializing cgroup subsys ns [ 0.004356] Initializing cgroup subsys cpuacct [ 0.004365] Initializing cgroup subsys memory [ 0.004382] Initializing cgroup subsys devices [ 0.004388] Initializing cgroup subsys freezer [ 0.004393] Initializing cgroup subsys net_cls [ 0.004437] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004445] CPU: L2 cache: 512K [ 0.004449] CPU: Hyper-Threading is disabled [ 0.004458] mce: CPU supports 4 MCE banks [ 0.004488] Performance Events: no PMU driver, software events only. [ 0.004502] Checking 'hlt' instruction... OK. [ 0.021495] SMP alternatives: switching to UP code [ 0.039107] Freeing SMP alternatives: 19k freed [ 0.039154] ACPI: Core revision 20090903 [ 0.049230] ACPI: setting ELCR to 0200 (from 0c20) [ 0.052017] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.052031] ftrace: allocating 21786 entries in 43 pages [ 0.056177] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.056186] weird, boot CPU (#0) not listed by the BIOS. [ 0.056191] SMP motherboard not detected. [ 0.056195] Local APIC not detected. Using dummy APIC emulation. [ 0.056199] SMP disabled [ 0.056564] Brought up 1 CPUs [ 0.056569] Total of 1 processors activated (3582.43 BogoMIPS). [ 0.057135] CPU0 attaching NULL sched-domain. [ 0.057434] devtmpfs: initialized [ 0.058130] regulator: core version 0.5 [ 0.058171] Time: 19:04:53 Date: 01/30/11 [ 0.058259] NET: Registered protocol family 16 [ 0.058488] EISA bus registered [ 0.058508] ACPI: bus type pci registered [ 0.061248] PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1 [ 0.061253] PCI: Using configuration type 1 for base access [ 0.063186] bio: create slab at 0 [ 0.064081] ACPI: EC: Look up EC in DSDT [ 0.070609] ACPI: Interpreter enabled [ 0.070620] ACPI: (supports S0 S3 S4 S5) [ 0.070658] ACPI: Using PIC for interrupt routing [ 0.082801] ACPI: EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62 [ 0.082884] ACPI: Power Resource [URP1] (off) [ 0.083075] ACPI: No dock devices found. [ 0.083298] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.083384] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff] [ 0.084068] pci 0000:00:01.0: supports D1 [ 0.084117] pci 0000:00:03.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.084143] pci 0000:00:03.0: supports D1 D2 [ 0.084149] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.084156] pci 0000:00:03.0: PME# disabled [ 0.084230] pci 0000:00:07.0: reg 20 io port: [0xe800-0xe81f] [ 0.084266] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.084274] pci 0000:00:07.0: PME# disabled [ 0.084343] pci 0000:00:07.1: reg 20 io port: [0xec00-0xec1f] [ 0.084379] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.084387] pci 0000:00:07.1: PME# disabled [ 0.084434] pci 0000:00:07.2: reg 10 32bit mmio: [0xdfffff00-0xdfffffff] [ 0.084492] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold [ 0.084500] pci 0000:00:07.2: PME# disabled [ 0.084563] pci 0000:00:0a.0: reg 10 32bit mmio: [0xdffff000-0xdffff7ff] [ 0.084574] pci 0000:00:0a.0: reg 14 io port: [0xe400-0xe47f] [ 0.084628] pci 0000:00:0a.0: supports D2 [ 0.084632] pci 0000:00:0a.0: PME# supported from D2 D3hot D3cold [ 0.084639] pci 0000:00:0a.0: PME# disabled [ 0.084812] pci 0000:00:11.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.084913] pci 0000:00:11.2: reg 20 io port: [0xd400-0xd41f] [ 0.085011] pci 0000:00:11.3: reg 20 io port: [0xd800-0xd81f] [ 0.085090] pci 0000:00:11.5: reg 10 io port: [0xd800-0xd8ff] [ 0.085191] pci 0000:00:11.6: reg 10 io port: [0xe000-0xe0ff] [ 0.085292] pci 0000:00:12.0: reg 10 io port: [0xd000-0xd0ff] [ 0.085303] pci 0000:00:12.0: reg 14 32bit mmio: [0xdffffe00-0xdffffeff] [ 0.085358] pci 0000:00:12.0: supports D1 D2 [ 0.085362] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.085369] pci 0000:00:12.0: PME# disabled [ 0.085451] pci 0000:01:00.0: reg 10 32bit mmio: [0xde000000-0xdeffffff] [ 0.085461] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd8000000-0xdbffffff] [ 0.085472] pci 0000:01:00.0: reg 18 32bit mmio pref: [0xddc80000-0xddcfffff] [ 0.085495] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfee0000-0xdfefffff] [ 0.085572] pci 0000:00:01.0: bridge 32bit mmio: [0xdde00000-0xdfefffff] [ 0.085582] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd5b00000-0xddcfffff] [ 0.085616] pci_bus 0000:00: on NUMA node 0 [ 0.085625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.085754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.140642] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.140818] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.140990] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11) *5 [ 0.141155] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7) *10 [ 0.141356] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.141362] vgaarb: loaded [ 0.141615] SCSI subsystem initialized [ 0.141770] libata version 3.00 loaded. [ 0.141920] usbcore: registered new interface driver usbfs [ 0.141946] usbcore: registered new interface driver hub [ 0.141994] usbcore: registered new device driver usb [ 0.144152] ACPI: WMI: Mapper loaded [ 0.144157] PCI: Using ACPI for IRQ routing [ 0.144210] pci 0000:00:11.5: BAR 0: address space collision on of device [0xd800-0xd8ff] [ 0.144215] pci 0000:00:11.5: BAR 0: can't allocate resource [ 0.144425] NetLabel: Initializing [ 0.144429] NetLabel: domain hash size = 128 [ 0.144432] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.144461] NetLabel: unlabeled traffic allowed by default [ 0.144549] Switching to clocksource tsc [ 0.148001] AppArmor: AppArmor Filesystem Enabled [ 0.148001] pnp: PnP ACPI init [ 0.148001] ACPI: bus type pnp registered [ 0.158017] pnp: PnP ACPI: found 10 devices [ 0.158022] ACPI: ACPI bus type pnp unregistered [ 0.158032] PnPBIOS: Disabled by ACPI PNP [ 0.192982] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.192987] pci 0000:00:01.0: IO window: disabled [ 0.192997] pci 0000:00:01.0: MEM window: 0xdde00000-0xdfefffff [ 0.193004] pci 0000:00:01.0: PREFETCH window: 0xd5b00000-0xddcfffff [ 0.193014] pci 0000:00:03.0: CardBus bridge, secondary bus 0000:02 [ 0.193018] pci 0000:00:03.0: IO window: 0x001000-0x0010ff [ 0.193025] pci 0000:00:03.0: IO window: 0x001400-0x0014ff [ 0.193032] pci 0000:00:03.0: PREFETCH window: 0x10000000-0x13ffffff [ 0.193039] pci 0000:00:03.0: MEM window: 0x14000000-0x17ffffff [ 0.193063] pci 0000:00:01.0: setting latency timer to 64 [ 0.193335] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.193340] PCI: setting IRQ 11 as level-triggered [ 0.193349] pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.193357] pci 0000:00:03.0: setting latency timer to 64 [ 0.193366] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.193371] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.193377] pci_bus 0000:01: resource 1 mem: [0xdde00000-0xdfefffff] [ 0.193381] pci_bus 0000:01: resource 2 pref mem [0xd5b00000-0xddcfffff] [ 0.193387] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff] [ 0.193391] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff] [ 0.193396] pci_bus 0000:02: resource 2 pref mem [0x10000000-0x13ffffff] [ 0.193401] pci_bus 0000:02: resource 3 mem: [0x14000000-0x17ffffff] [ 0.193479] NET: Registered protocol family 2 [ 0.193668] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.194202] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.194279] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.194348] TCP: Hash tables configured (established 8192 bind 8192) [ 0.194352] TCP reno registered [ 0.194473] NET: Registered protocol family 1 [ 0.194506] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.194635] pci 0000:01:00.0: Boot video device [ 0.194931] cpufreq-nforce2: No nForce2 chipset. [ 0.194984] Scanning for low memory corruption every 60 seconds [ 0.195181] audit: initializing netlink socket (disabled) [ 0.195205] type=2000 audit(1296414293.191:1): initialized [ 0.207773] Trying to unpack rootfs image as initramfs... [ 0.223562] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.226276] VFS: Disk quotas dquot_6.5.2 [ 0.226397] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.231749] fuse init (API version 7.13) [ 0.231992] msgmni has been set to 473 [ 0.232508] alg: No test for stdrng (krng) [ 0.232637] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.232644] io scheduler noop registered [ 0.232647] io scheduler anticipatory registered [ 0.232651] io scheduler deadline registered [ 0.232730] io scheduler cfq registered (default) [ 0.232953] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.232999] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.247966] ACPI: AC Adapter [AC0] (on-line) [ 0.248157] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.248166] ACPI: Power Button [PWRB] [ 0.248273] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.267705] ACPI: Lid Switch [LIDD] [ 0.267865] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.267873] ACPI: Sleep Button [SLPB] [ 0.267954] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.267959] ACPI: Power Button [PWRF] [ 0.268342] processor LNXCPU:00: registered as cooling_device0 [ 0.303735] isapnp: Scanning for PnP cards... [ 0.309755] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.309891] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.310508] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.312491] brd: module loaded [ 0.313359] loop: module loaded [ 0.313559] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.313869] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A [ 0.313977] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A [ 0.314602] Fixed MDIO Bus: probed [ 0.314673] PPP generic driver version 2.4.2 [ 0.314774] tun: Universal TUN/TAP device driver, 1.6 [ 0.314778] tun: (C) 1999-2004 Max Krasnyansky [ 0.314938] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.363736] ACPI: Battery Slot [BAT0] (battery absent) [ 0.363900] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7 [ 0.363907] PCI: setting IRQ 7 as level-triggered [ 0.363918] ehci_hcd 0000:00:07.2: PCI INT C -> Link[LNKD] -> GSI 7 (level, low) -> IRQ 7 [ 0.363958] ehci_hcd 0000:00:07.2: EHCI Host Controller [ 0.364126] ehci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 0.364205] ehci_hcd 0000:00:07.2: irq 7, io mem 0xdfffff00 [ 0.375552] ehci_hcd 0000:00:07.2: USB 2.0 started, EHCI 0.95 [ 0.375828] usb usb1: configuration #1 chosen from 1 choice [ 0.375887] hub 1-0:1.0: USB hub found [ 0.375908] hub 1-0:1.0: 4 ports detected [ 0.376023] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.376057] uhci_hcd: USB Universal Host Controller Interface driver [ 0.376167] uhci_hcd 0000:00:07.0: PCI INT A -> Link[LNKD] -> GSI 7 (level, low) -> IRQ 7 [ 0.376188] uhci_hcd 0000:00:07.0: UHCI Host Controller [ 0.376266] uhci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 2 [ 0.376305] uhci_hcd 0000:00:07.0: irq 7, io base 0x0000e800 [ 0.376479] usb usb2: configuration #1 chosen from 1 choice [ 0.376530] hub 2-0:1.0: USB hub found [ 0.376545] hub 2-0:1.0: 2 ports detected [ 0.376626] uhci_hcd 0000:00:07.1: PCI INT B -> Link[LNKD] -> GSI 7 (level, low) -> IRQ 7 [ 0.376638] uhci_hcd 0000:00:07.1: UHCI Host Controller [ 0.376701] uhci_hcd 0000:00:07.1: new USB bus registered, assigned bus number 3 [ 0.376731] uhci_hcd 0000:00:07.1: irq 7, io base 0x0000ec00 [ 0.376890] usb usb3: configuration #1 chosen from 1 choice [ 0.376939] hub 3-0:1.0: USB hub found [ 0.376956] hub 3-0:1.0: 2 ports detected [ 0.377033] uhci_hcd 0000:00:11.2: PCI INT D -> Link[LNKD] -> GSI 7 (level, low) -> IRQ 7 [ 0.377040] uhci_hcd 0000:00:11.2: VIA VLink IRQ fixup, from 10 to 7 [ 0.377066] uhci_hcd 0000:00:11.2: UHCI Host Controller [ 0.377133] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4 [ 0.377163] uhci_hcd 0000:00:11.2: irq 7, io base 0x0000d400 [ 0.377341] usb usb4: configuration #1 chosen from 1 choice [ 0.377396] hub 4-0:1.0: USB hub found [ 0.377413] hub 4-0:1.0: 2 ports detected [ 0.377489] uhci_hcd 0000:00:11.3: PCI INT D -> Link[LNKD] -> GSI 7 (level, low) -> IRQ 7 [ 0.377497] uhci_hcd 0000:00:11.3: VIA VLink IRQ fixup, from 10 to 7 [ 0.377522] uhci_hcd 0000:00:11.3: UHCI Host Controller [ 0.377590] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5 [ 0.377621] uhci_hcd 0000:00:11.3: irq 7, io base 0x0000d800 [ 0.377792] usb usb5: configuration #1 chosen from 1 choice [ 0.377843] hub 5-0:1.0: USB hub found [ 0.377860] hub 5-0:1.0: 2 ports detected [ 0.378041] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.384061] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.384084] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.387887] mice: PS/2 mouse device common for all mice [ 0.388239] rtc_cmos 00:02: RTC can wake from S4 [ 0.388335] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.388398] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.388644] device-mapper: uevent: version 1.0.3 [ 0.388911] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.390333] device-mapper: multipath: version 1.1.0 loaded [ 0.390340] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.391292] EISA: Probing bus 0 at eisa.0 [ 0.391308] Cannot allocate resource for EISA slot 1 [ 0.391342] EISA: Detected 0 cards. [ 0.392158] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.396720] cpuidle: using governor ladder [ 0.396727] cpuidle: using governor menu [ 0.397766] TCP cubic registered [ 0.398005] NET: Registered protocol family 10 [ 0.398835] lo: Disabled Privacy Extensions [ 0.399440] NET: Registered protocol family 17 [ 0.399570] Using IPI No-Shortcut mode [ 0.399800] PM: Resume from disk failed. [ 0.399832] registered taskstats version 1 [ 0.400255] Magic number: 11:751:92 [ 0.400414] rtc_cmos 00:02: setting system clock to 2011-01-30 19:04:53 UTC (1296414293) [ 0.400421] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.400424] EDD information not available. [ 0.727221] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 0.987119] isapnp: No Plug & Play device found [ 1.015827] Freeing initrd memory: 7777k freed [ 1.032630] Freeing unused kernel memory: 656k freed [ 1.034127] Write protecting the kernel text: 4684k [ 1.034174] Write protecting the kernel read-only data: 1840k [ 1.077514] udev: starting version 151 [ 1.094583] usb 1-3: configuration #1 chosen from 1 choice [ 1.462733] pata_via 0000:00:11.1: version 0.3.4 [ 1.462762] pata_via 0000:00:11.1: can't derive routing for PCI INT A [ 1.480121] scsi0 : pata_via [ 1.488163] scsi1 : pata_via [ 1.491935] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 1.491942] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 1.656634] ata1.00: ATA-5: HITACHI_DK23DA-40, 00J0A0A1, max UDMA/100 [ 1.656641] ata1.00: 78140160 sectors, multi 16: LBA [ 1.672499] ata1.00: configured for UDMA/100 [ 1.672739] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23DA-4 00J0 PQ: 0 ANSI: 5 [ 1.673069] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.673715] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.673812] sd 0:0:0:0: [sda] Write Protect is off [ 1.673818] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.673866] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.674174] sda: sda1 sda2 < sda5 > [ 1.712881] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.828678] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-241, VX11, max UDMA/33 [ 1.836357] ata2.00: configured for UDMA/33 [ 1.837209] scsi 1:0:0:0: CD-ROM QSI CDRW/DVD SBW-241 VX11 PQ: 0 ANSI: 5 [ 1.839864] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.839873] Uniform CD-ROM driver Revision: 3.20 [ 1.840152] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.840299] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.862132] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.862545] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 1.862551] PCI: setting IRQ 10 as level-triggered [ 1.862560] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 1.876749] eth0: VIA Rhine II at 0xdffffe00, 00:40:45:08:5a:8c, IRQ 10. [ 1.877470] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 1.880616] ohci1394 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.938067] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[dffff000-dffff7ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 2.318787] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.216288] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00012f210000ca83] [ 14.743619] Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k [ 16.756997] udev: starting version 151 [ 18.445155] Linux agpgart interface v0.103 [ 18.608505] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input6 [ 18.608864] agpgart: Detected VIA P4X266 chipset [ 18.610153] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 18.639113] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 18.645918] type=1505 audit(1296410711.743:2): operation="profile_load" pid=454 name="/sbin/dhclient3" [ 18.646838] type=1505 audit(1296410711.743:3): operation="profile_load" pid=454 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 18.647346] type=1505 audit(1296410711.743:4): operation="profile_load" pid=454 name="/usr/lib/connman/scripts/dhclient-script" [ 18.649151] type=1505 audit(1296410711.747:5): operation="profile_replace" pid=452 name="/sbin/dhclient3" [ 18.650162] type=1505 audit(1296410711.747:6): operation="profile_replace" pid=452 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 18.650689] type=1505 audit(1296410711.747:7): operation="profile_replace" pid=452 name="/usr/lib/connman/scripts/dhclient-script" [ 18.703811] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.910969] cfg80211: Calling CRDA to update world regulatory domain [ 19.189357] irda_init() [ 19.189395] NET: Registered protocol family 23 [ 19.197189] yenta_cardbus 0000:00:03.0: CardBus bridge found [14ff:0603] [ 19.197219] yenta_cardbus 0000:00:03.0: Enabling burst memory read transactions [ 19.197226] yenta_cardbus 0000:00:03.0: Using CSCINT to route CSC interrupts to PCI [ 19.197231] yenta_cardbus 0000:00:03.0: Routing CardBus interrupts to PCI [ 19.197239] yenta_cardbus 0000:00:03.0: TI: mfunc 0x012c1202, devctl 0x64 [ 19.351791] cfg80211: World regulatory domain updated: [ 19.351801] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.351807] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.351812] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.351818] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.351823] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.351828] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.428615] yenta_cardbus 0000:00:03.0: ISA IRQ mask 0x0040, PCI irq 11 [ 19.428624] yenta_cardbus 0000:00:03.0: Socket status: 30000006 [ 19.489460] [drm] Initialized drm 1.1.0 20060810 [ 19.511884] lp: driver loaded but no devices found [ 19.941081] Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0 [ 19.978929] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 20.749117] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 20.749129] nouveau 0000:01:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 20.770410] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [ 20.774218] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x017600a5) [ 20.774377] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 20.774387] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 20.774391] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 20.819205] [drm] nouveau 0000:01:00.0: ... BIOS checksum invalid [ 20.819211] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM [ 20.821038] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 20.821223] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 20.821228] [drm] nouveau 0000:01:00.0: BMP version 5.21 [ 20.821234] [drm] nouveau 0000:01:00.0: Bios version 04.17.00.59 [ 20.821240] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.0 [ 20.821248] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000100 000088b8 [ 20.821254] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 030102f3 00000005 [ 20.821259] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02020121 00000003 [ 20.821263] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020221 00000003 [ 20.821268] [drm] nouveau 0000:01:00.0: Merging DCB entries 2 and 3 [ 20.821414] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [ 20.821420] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD054 [ 20.821464] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD3CE [ 20.876058] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD16F [ 20.896051] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD912 [ 20.896070] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD32A [ 20.964359] [drm] nouveau 0000:01:00.0: FP table revision 0.0 not currently supported [ 20.990837] [TTM] Zone kernel: Available graphics memory: 125306 kiB. [ 20.990864] [drm] nouveau 0000:01:00.0: 32 MiB VRAM [ 20.990963] agpgart-via 0000:00:00.0: AGP 2.0 bridge [ 20.990993] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode [ 20.991108] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 20.991114] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 20.991435] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 20.993099] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 20.993121] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 20.993131] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 21.039853] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 21.040682] [drm] nouveau 0000:01:00.0: Detected a LVDS connector [ 21.041375] [drm] nouveau 0000:01:00.0: Found EDID in BIOS [ 21.041394] [drm] nouveau 0000:01:00.0: Detected a TV connector [ 21.043163] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 21.043171] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1) [ 21.043178] [drm] nouveau 0000:01:00.0: Calling LVDS script 1: [ 21.043183] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 21.043189] [drm] nouveau 0000:01:00.0: 0xE6B0: Parsing digital output script table [ 21.100645] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected. [ 21.100722] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. [ 21.100885] usbcore: registered new interface driver rt2500usb [ 21.111410] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 21.113803] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7 [ 21.114677] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding 0x828-0x87f [ 21.115222] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc7f [ 21.115997] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 21.564630] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2) [ 21.696813] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo ca576600 [ 21.697292] fb0: nouveaufb frame buffer device [ 21.697297] registered panic notifier [ 21.697310] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 22.018740] vga16fb: initializing [ 22.018753] vga16fb: mapped to 0xc00a0000 [ 22.018763] vga16fb: not registering due to another framebuffer present [ 22.318418] phy1: Selected rate control algorithm 'minstrel' [ 22.319795] Registered led device: rt73usb-phy1::radio [ 22.319832] Registered led device: rt73usb-phy1::assoc [ 22.319864] Registered led device: rt73usb-phy1::quality [ 22.321484] usbcore: registered new interface driver rt73usb [ 22.444074] type=1505 audit(1296410715.543:8): operation="profile_load" pid=661 name="/usr/share/gdm/guest-session/Xsession" [ 22.450146] type=1505 audit(1296410715.547:9): operation="profile_replace" pid=668 name="/sbin/dhclient3" [ 22.451120] type=1505 audit(1296410715.547:10): operation="profile_replace" pid=668 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 22.451653] type=1505 audit(1296410715.547:11): operation="profile_replace" pid=668 name="/usr/lib/connman/scripts/dhclient-script" [ 22.516528] VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 22.516540] VIA 82xx Modem 0000:00:11.6: VIA VLink IRQ fixup, from 5 to 11 [ 22.520478] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 [ 22.658634] udev: renamed network interface wlan0 to wlan1 [ 22.700460] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output A [ 22.700467] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 22.700473] [drm] nouveau 0000:01:00.0: 0xE6ED: Parsing digital output script table [ 22.720106] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1) [ 22.720114] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 22.720120] [drm] nouveau 0000:01:00.0: 0xE64A: Parsing digital output script table [ 22.720138] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output A [ 22.722015] Console: switching to colour frame buffer device 128x48 [ 23.030843] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 23.030855] VIA 82xx Audio 0000:00:11.5: VIA VLink IRQ fixup, from 5 to 11 [ 23.031029] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 23.784409] __ratelimit: 15 callbacks suppressed [ 23.784416] type=1505 audit(1296410716.883:17): operation="profile_load" pid=708 name="/usr/sbin/tcpdump" [ 24.871568] pnp 00:08: disabled [ 24.873917] pnp 00:08: activated [ 25.142219] rt73usb 1-3:1.0: firmware: requesting rt73.bin [ 25.502480] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 25.508286] eth0: link down [ 25.508382] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.061994] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 29.063188] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 29.838540] ppdev: user-space parallel port driver [ 76.990357] wlan1: deauthenticating from 00:1a:2a:24:38:fc by local choice (reason=3) [ 76.996662] wlan1: direct probe to AP 00:1a:2a:24:38:fc (try 1) [ 77.007770] wlan1: direct probe responded [ 77.007782] wlan1: authenticate with AP 00:1a:2a:24:38:fc (try 1) [ 77.009940] wlan1: authenticated [ 77.009986] wlan1: associate with AP 00:1a:2a:24:38:fc (try 1) [ 77.025707] wlan1: RX AssocResp from 00:1a:2a:24:38:fc (capab=0x431 status=0 aid=1) [ 77.025717] wlan1: associated [ 77.039028] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 83.373620] padlock: VIA PadLock not detected. [ 87.968066] wlan1: no IPv6 routers present [ 128.833798] lo: Disabled Privacy Extensions [ 1535.506899] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1) [ 1535.506910] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 1535.506918] [drm] nouveau 0000:01:00.0: 0xE6B0: Parsing digital output script table [ 2327.628051] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1) [ 2327.628061] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 2327.628069] [drm] nouveau 0000:01:00.0: 0xE6ED: Parsing digital output script table [ 2327.648076] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 2327.648083] [drm] nouveau 0000:01:00.0: 0xE64A: Parsing digital output script table [ 2942.190156] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1) [ 2942.190166] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 2942.190174] [drm] nouveau 0000:01:00.0: 0xE6B0: Parsing digital output script table [ 3665.662216] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1) [ 3665.662226] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 3665.662234] [drm] nouveau 0000:01:00.0: 0xE6ED: Parsing digital output script table [ 3665.680077] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 3665.680085] [drm] nouveau 0000:01:00.0: 0xE64A: Parsing digital output script table