[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-16-generic-pae (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 05:20:21 UTC 2009 (Ubuntu 2.6.31-16.53-generic-pae) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] modified: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] modified: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] modified: 00000000f0000000 - 00000000f2000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000 [ 0.000000] RAMDISK: 3789f000 - 37fef459 [ 0.000000] Allocated new RAMDISK: 008b5000 - 01005459 [ 0.000000] Move RAMDISK from 000000003789f000 - 0000000037fef458 to 008b5000 - 01005458 [ 0.000000] ACPI: RSDP 000f6b50 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 7fff3000 00030 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: FACP 7fff3040 00074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: DSDT 7fff30c0 04DA6 (v01 GBT AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 7fff0000 00040 [ 0.000000] ACPI: MCFG 7fff7f00 0003C (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: APIC 7fff7e80 00072 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1157MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00009000 - 0000ff40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ad9a0] TEXT DATA BSS ==> [0000100000 - 00008ad9a0] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008ae000 - 00008b40a6] BRK ==> [00008ae000 - 00008b40a6] [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #7 [00008b5000 - 0001005459] NEW RAMDISK ==> [00008b5000 - 0001005459] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] found SMP MP-table at [c00f51a0] f51a0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0007fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524171 [ 0.000000] free_area_init_node: node 0, pgdat c078bd20, node_mem_map c1006000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2316 pages used for memmap [ 0.000000] HighMem zone: 294118 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2010000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520075 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic-pae root=UUID=df87cb15-c5cd-4de3-8d9f-8470e79d4f09 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10485440 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:0007fff0) [ 0.000000] Memory: 2052848k/2097088k available (4590k kernel code, 42984k reserved, 2147k data, 544k init, 1185736k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc0795000 - 0xc081d000 ( 544 kB) [ 0.000000] .data : 0xc057b994 - 0xc07947a8 (2147 kB) [ 0.000000] .text : 0xc0100000 - 0xc057b994 (4590 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2210.015 MHz processor. [ 0.000014] spurious 8259A interrupt: IRQ7. [ 0.001734] Console: colour VGA+ 80x25 [ 0.001738] console [tty0] enabled [ 0.001797] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.03 BogoMIPS (lpj=8840060) [ 0.001826] Security Framework initialized [ 0.001851] AppArmor: AppArmor initialized [ 0.001859] Mount-cache hash table entries: 512 [ 0.002014] Initializing cgroup subsys ns [ 0.002019] Initializing cgroup subsys cpuacct [ 0.002023] Initializing cgroup subsys memory [ 0.002030] Initializing cgroup subsys freezer [ 0.002032] Initializing cgroup subsys net_cls [ 0.002046] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.002048] CPU: L2 Cache: 512K (64 bytes/line) [ 0.002052] mce: CPU supports 5 MCE banks [ 0.002072] Performance Counters: AMD PMU driver. [ 0.002077] ... version: 0 [ 0.002078] ... bit width: 48 [ 0.002080] ... generic counters: 4 [ 0.002082] ... value mask: 0000ffffffffffff [ 0.002084] ... max period: 00007fffffffffff [ 0.002085] ... fixed-purpose counters: 0 [ 0.002087] ... counter mask: 000000000000000f [ 0.002092] Checking 'hlt' instruction... OK. [ 0.016624] SMP alternatives: switching to UP code [ 0.022182] ACPI: Core revision 20090521 [ 0.031497] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.071189] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02 [ 0.072001] Brought up 1 CPUs [ 0.072001] Total of 1 processors activated (4420.03 BogoMIPS). [ 0.072001] CPU0 attaching NULL sched-domain. [ 0.072001] Booting paravirtualized kernel on bare hardware [ 0.072001] regulator: core version 0.5 [ 0.072001] Time: 17:44:11 Date: 12/28/09 [ 0.072001] NET: Registered protocol family 16 [ 0.072001] EISA bus registered [ 0.072001] ACPI: bus type pci registered [ 0.072001] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 [ 0.072001] PCI: MCFG area at f0000000 reserved in E820 [ 0.072001] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 31 [ 0.072001] PCI: Using MMCONFIG for extended config space [ 0.072001] PCI: Using configuration type 1 for base access [ 0.072001] bio: create slab at 0 [ 0.072001] ACPI: EC: Look up EC in DSDT [ 0.074156] ACPI Warning: Package List length (6) larger than NumElements count (2), truncated [ 0.074161] 20090521 dsobject-502 [ 0.077515] ACPI: Interpreter enabled [ 0.077520] ACPI: (supports S0 S1 S4 S5) [ 0.077539] ACPI: Using IOAPIC for interrupt routing [ 0.086035] ACPI: No dock devices found. [ 0.086129] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.086386] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.086389] pci 0000:00:04.0: PME# disabled [ 0.086625] pci 0000:00:0a.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.086631] pci 0000:00:0a.1: reg 24 io port: [0x1c80-0x1cbf] [ 0.086655] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.086660] pci 0000:00:0a.1: PME# disabled [ 0.086727] pci 0000:00:0b.0: reg 10 32bit mmio: [0xf6101000-0xf6101fff] [ 0.086755] pci 0000:00:0b.0: supports D1 D2 [ 0.086757] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.086761] pci 0000:00:0b.0: PME# disabled [ 0.086787] pci 0000:00:0b.1: reg 10 32bit mmio: [0xf6102000-0xf61020ff] [ 0.086817] pci 0000:00:0b.1: supports D1 D2 [ 0.086819] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.086822] pci 0000:00:0b.1: PME# disabled [ 0.086860] pci 0000:00:0d.0: reg 20 io port: [0xf000-0xf00f] [ 0.086902] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] [ 0.086907] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] [ 0.086911] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] [ 0.086916] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] [ 0.086921] pci 0000:00:0e.0: reg 20 io port: [0xd800-0xd80f] [ 0.086926] pci 0000:00:0e.0: reg 24 32bit mmio: [0xf6100000-0xf6100fff] [ 0.087004] pci 0000:00:10.2: reg 10 io port: [0xc000-0xc0ff] [ 0.087010] pci 0000:00:10.2: reg 14 io port: [0xc400-0xc4ff] [ 0.087015] pci 0000:00:10.2: reg 18 32bit mmio: [0xf6104000-0xf6104fff] [ 0.087038] pci 0000:00:10.2: supports D1 D2 [ 0.087067] pci 0000:00:14.0: reg 10 32bit mmio: [0xf6103000-0xf6103fff] [ 0.087072] pci 0000:00:14.0: reg 14 io port: [0xe400-0xe407] [ 0.087094] pci 0000:00:14.0: supports D1 D2 [ 0.087096] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.087100] pci 0000:00:14.0: PME# disabled [ 0.087192] pci 0000:02:00.0: reg 10 32bit mmio: [0xf4000000-0xf4ffffff] [ 0.087200] pci 0000:02:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.087208] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff] [ 0.087213] pci 0000:02:00.0: reg 24 io port: [0xb000-0xb07f] [ 0.087218] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.087276] pci 0000:00:04.0: bridge io port: [0xb000-0xbfff] [ 0.087279] pci 0000:00:04.0: bridge 32bit mmio: [0xf2000000-0xf5ffffff] [ 0.087283] pci 0000:00:04.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.087325] pci 0000:01:0e.0: reg 10 32bit mmio: [0xf6000000-0xf60007ff] [ 0.087331] pci 0000:01:0e.0: reg 14 io port: [0xa000-0xa07f] [ 0.087366] pci 0000:01:0e.0: supports D2 [ 0.087368] pci 0000:01:0e.0: PME# supported from D2 D3hot D3cold [ 0.087371] pci 0000:01:0e.0: PME# disabled [ 0.087393] pci 0000:00:10.0: transparent bridge [ 0.087396] pci 0000:00:10.0: bridge io port: [0xa000-0xafff] [ 0.087400] pci 0000:00:10.0: bridge 32bit mmio: [0xf6000000-0xf60fffff] [ 0.087408] pci_bus 0000:00: on NUMA node 0 [ 0.087412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.087601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.172323] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.172467] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.172610] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.172754] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) [ 0.172897] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15) [ 0.173039] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.173182] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.173324] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.173468] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 0.173613] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.173758] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.173901] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 *11 14 15) [ 0.174044] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.174187] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.174330] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.174474] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 0.174620] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.174762] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.174906] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.175055] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.175241] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.175417] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.175593] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.175775] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.175950] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 0.176132] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.176309] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.176488] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.176665] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.176843] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.177020] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.177198] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.177375] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.177553] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. [ 0.177731] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.177909] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.178086] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.178263] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.178441] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.178619] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.178796] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 0.178981] SCSI subsystem initialized [ 0.179064] libata version 3.00 loaded. [ 0.179134] usbcore: registered new interface driver usbfs [ 0.179148] usbcore: registered new interface driver hub [ 0.179171] usbcore: registered new device driver usb [ 0.179294] ACPI: WMI: Mapper loaded [ 0.179296] PCI: Using ACPI for IRQ routing [ 0.179437] Bluetooth: Core ver 2.15 [ 0.179461] NET: Registered protocol family 31 [ 0.179462] Bluetooth: HCI device and connection manager initialized [ 0.179466] Bluetooth: HCI socket layer initialized [ 0.179468] NetLabel: Initializing [ 0.179469] NetLabel: domain hash size = 128 [ 0.179471] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.179484] NetLabel: unlabeled traffic allowed by default [ 0.181081] pnp: PnP ACPI init [ 0.181110] ACPI: bus type pnp registered [ 0.186276] pnp: PnP ACPI: found 13 devices [ 0.186278] ACPI: ACPI bus type pnp unregistered [ 0.186283] PnPBIOS: Disabled by ACPI PNP [ 0.186295] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.186298] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.186301] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.186303] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.186306] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.186309] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.186312] system 00:01: ioport range 0x2000-0x207f has been reserved [ 0.186315] system 00:01: ioport range 0x2080-0x20ff has been reserved [ 0.186319] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 0.186322] system 00:01: iomem range 0xf0000000-0xf1ffffff has been reserved [ 0.186327] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.186330] system 00:02: ioport range 0x290-0x29f has been reserved [ 0.186337] system 00:0c: iomem range 0xce000-0xcffff has been reserved [ 0.186340] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.186343] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.186345] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.186348] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.186351] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.186354] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.186357] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.186360] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.186363] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.221053] AppArmor: AppArmor Filesystem Enabled [ 0.221082] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.221085] pci 0000:00:04.0: IO window: 0xb000-0xbfff [ 0.221089] pci 0000:00:04.0: MEM window: 0xf2000000-0xf5ffffff [ 0.221092] pci 0000:00:04.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.221097] pci 0000:00:10.0: PCI bridge, secondary bus 0000:01 [ 0.221100] pci 0000:00:10.0: IO window: 0xa000-0xafff [ 0.221104] pci 0000:00:10.0: MEM window: 0xf6000000-0xf60fffff [ 0.221107] pci 0000:00:10.0: PREFETCH window: disabled [ 0.221118] pci 0000:00:04.0: setting latency timer to 64 [ 0.221122] pci 0000:00:10.0: setting latency timer to 64 [ 0.221128] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.221130] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.221133] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] [ 0.221136] pci_bus 0000:02: resource 1 mem: [0xf2000000-0xf5ffffff] [ 0.221138] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.221141] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.221144] pci_bus 0000:01: resource 1 mem: [0xf6000000-0xf60fffff] [ 0.221146] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.221148] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.221186] NET: Registered protocol family 2 [ 0.221281] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.221646] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.222694] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.223285] TCP: Hash tables configured (established 131072 bind 65536) [ 0.223288] TCP reno registered [ 0.223402] NET: Registered protocol family 1 [ 0.223473] Trying to unpack rootfs image as initramfs... [ 0.224033] Switched to high resolution mode on CPU 0 [ 0.418893] Freeing initrd memory: 7489k freed [ 0.427290] cpufreq-nforce2: No nForce2 chipset. [ 0.427316] Scanning for low memory corruption every 60 seconds [ 0.427425] audit: initializing netlink socket (disabled) [ 0.427444] type=2000 audit(1262022251.424:1): initialized [ 0.435800] highmem bounce pool size: 64 pages [ 0.435806] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.437007] VFS: Disk quotas dquot_6.5.2 [ 0.437055] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.437508] fuse init (API version 7.12) [ 0.437577] msgmni has been set to 1709 [ 0.437758] alg: No test for stdrng (krng) [ 0.437768] io scheduler noop registered [ 0.437770] io scheduler anticipatory registered [ 0.437772] io scheduler deadline registered [ 0.437810] io scheduler cfq registered (default) [ 0.437834] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.437839] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.437873] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.438032] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.438039] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.438092] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.438097] pci 0000:00:10.0: Enabling HT MSI Mapping [ 0.438120] pci 0000:02:00.0: Boot video device [ 0.438213] alloc irq_desc for 24 on node -1 [ 0.438215] alloc kstat_irqs on node -1 [ 0.438224] pcieport-driver 0000:00:04.0: irq 24 for MSI/MSI-X [ 0.438230] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 0.438284] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.438306] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.438423] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.438427] ACPI: Power Button [PWRF] [ 0.438474] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.438477] ACPI: Power Button [PWRB] [ 0.438916] processor LNXCPU:00: registered as cooling_device0 [ 0.442568] isapnp: Scanning for PnP cards... [ 0.795737] isapnp: No Plug & Play device found [ 0.796686] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.796799] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.796896] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.797136] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.797254] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.798122] brd: module loaded [ 0.798494] loop: module loaded [ 0.798558] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.798739] sata_nv 0000:00:0e.0: version 3.5 [ 0.799110] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.799115] alloc irq_desc for 23 on node -1 [ 0.799117] alloc kstat_irqs on node -1 [ 0.799126] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.799129] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 0.799193] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 0.799428] scsi0 : sata_nv [ 0.799526] scsi1 : sata_nv [ 0.799670] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 [ 0.799673] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 [ 0.799748] pata_amd 0000:00:0d.0: version 0.4.1 [ 0.799793] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 0.799932] scsi2 : pata_amd [ 0.799993] scsi3 : pata_amd [ 0.800715] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.800717] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.801315] Fixed MDIO Bus: probed [ 0.801345] PPP generic driver version 2.4.2 [ 0.801455] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.801800] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.801804] alloc irq_desc for 22 on node -1 [ 0.801806] alloc kstat_irqs on node -1 [ 0.801813] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.801828] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 0.801831] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 0.801889] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 0.801921] ehci_hcd 0000:00:0b.1: debug port 1 [ 0.801926] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 0.801942] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xf6102000 [ 0.812018] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 0.812101] usb usb1: configuration #1 chosen from 1 choice [ 0.812127] hub 1-0:1.0: USB hub found [ 0.812138] hub 1-0:1.0: 8 ports detected [ 0.812192] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.812504] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.812507] alloc irq_desc for 21 on node -1 [ 0.812509] alloc kstat_irqs on node -1 [ 0.812513] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 [ 0.812522] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 0.812525] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 0.812551] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.812573] ohci_hcd 0000:00:0b.0: irq 21, io mem 0xf6101000 [ 0.870060] usb usb2: configuration #1 chosen from 1 choice [ 0.870081] hub 2-0:1.0: USB hub found [ 0.870092] hub 2-0:1.0: 8 ports detected [ 0.870144] uhci_hcd: USB Universal Host Controller Interface driver [ 0.870223] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.870225] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.870609] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.870660] mice: PS/2 mouse device common for all mice [ 0.870741] rtc_cmos 00:04: RTC can wake from S4 [ 0.870771] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.870800] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.870886] device-mapper: uevent: version 1.0.3 [ 0.870970] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.871047] device-mapper: multipath: version 1.1.0 loaded [ 0.871050] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.871157] EISA: Probing bus 0 at eisa.0 [ 0.871163] Cannot allocate resource for EISA slot 1 [ 0.871166] Cannot allocate resource for EISA slot 2 [ 0.871184] EISA: Detected 0 cards. [ 0.871232] cpuidle: using governor ladder [ 0.871234] cpuidle: using governor menu [ 0.871671] TCP cubic registered [ 0.871808] NET: Registered protocol family 10 [ 0.872218] lo: Disabled Privacy Extensions [ 0.872487] NET: Registered protocol family 17 [ 0.872503] Bluetooth: L2CAP ver 2.13 [ 0.872504] Bluetooth: L2CAP socket layer initialized [ 0.872507] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.872508] Bluetooth: SCO socket layer initialized [ 0.872536] Bluetooth: RFCOMM TTY layer initialized [ 0.872539] Bluetooth: RFCOMM socket layer initialized [ 0.872540] Bluetooth: RFCOMM ver 1.11 [ 0.872554] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00) [ 0.872594] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6 [ 0.872597] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 [ 0.872633] Using IPI No-Shortcut mode [ 0.872687] PM: Resume from disk failed. [ 0.872700] registered taskstats version 1 [ 0.872819] Magic number: 5:629:745 [ 0.872930] rtc_cmos 00:04: setting system clock to 2009-12-28 17:44:12 UTC (1262022252) [ 0.872933] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.872934] EDD information not available. [ 0.902854] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.952061] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.960650] ata1.00: ATA-7: Maxtor 6L160M0, BANC1G10, max UDMA/100 [ 0.960653] ata1.00: 312581808 sectors, multi 16: LBA48 [ 0.968520] ata3.00: ATAPI: PIONEER DVD-RW DVR-110D, 1.37, max UDMA/66 [ 0.968549] ata3.01: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-103S 0111, E1.11, max UDMA/33 [ 0.968574] ata3: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f) [ 0.968579] ata3: nv_mode_filter: 0x421f&0x739f->0x421f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f) [ 0.976332] ata1.00: configured for UDMA/100 [ 0.976451] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L160M0 BANC PQ: 0 ANSI: 5 [ 0.976456] ata1.00: Disabling SWNCQ mode (depth 1) [ 0.976551] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.976596] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 0.976638] sd 0:0:0:0: [sda] Write Protect is off [ 0.976641] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.976661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.976773] sda: [ 0.984315] ata3.00: configured for UDMA/66 [ 1.000340] ata3.01: configured for UDMA/33 [ 1.006465] sda1 sda2 < sda5 sda6 > [ 1.037238] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.124025] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 1.132050] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.148172] ata2.00: HPA unlocked: 1953523055 -> 1953525168, native 1953525168 [ 1.148176] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7 [ 1.148179] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.156311] ata2.00: configured for UDMA/133 [ 1.156370] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 1.156451] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.156478] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.156514] sd 1:0:0:0: [sdb] Write Protect is off [ 1.156517] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.156536] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.156631] sdb: sdb1 [ 1.160836] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.162931] scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVR-110D 1.37 PQ: 0 ANSI: 5 [ 1.181303] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.181306] Uniform CD-ROM driver Revision: 3.20 [ 1.181366] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.181398] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 1.183114] scsi 2:0:1:0: CD-ROM PIONEER DVD-ROM DVD-103 1.11 PQ: 0 ANSI: 5 [ 1.187093] sr1: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray [ 1.187160] sr 2:0:1:0: Attached scsi CD-ROM sr1 [ 1.187195] sr 2:0:1:0: Attached scsi generic sg3 type 5 [ 1.351072] Freeing unused kernel memory: 544k freed [ 1.351530] Write protecting the kernel text: 4592k [ 1.351581] Write protecting the kernel read-only data: 1836k [ 1.400145] usb 1-2: configuration #1 chosen from 1 choice [ 1.501226] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.501583] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 1.501589] alloc irq_desc for 20 on node -1 [ 1.501591] alloc kstat_irqs on node -1 [ 1.501600] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 [ 1.501605] forcedeth 0000:00:14.0: setting latency timer to 64 [ 1.501657] nv_probe: set workaround bit for reversed mac addr [ 1.526626] Floppy drive(s): fd0 is 1.44M [ 1.544062] FDC 0 is a post-1991 82077 [ 1.572497] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 1.572505] alloc irq_desc for 19 on node -1 [ 1.572507] alloc kstat_irqs on node -1 [ 1.572516] ohci1394 0000:01:0e.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 1.631310] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[f6000000-f60007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.944035] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 2.021045] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:14:85:e7:f4:9b [ 2.021050] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 2.212105] usb 2-3: configuration #1 chosen from 1 choice [ 2.668021] usb 2-4: new full speed USB device using ohci_hcd and address 3 [ 2.916116] usb 2-4: configuration #1 chosen from 1 choice [ 2.940141] usbcore: registered new interface driver hiddev [ 2.940181] usbcore: registered new interface driver usbhid [ 2.940184] usbhid: v2.6:USB HID core driver [ 2.944136] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000148500e6836a] [ 3.125140] PM: Starting manual resume from disk [ 3.125146] PM: Resume from partition 8:5 [ 3.125148] PM: Checking hibernation image. [ 3.125288] PM: Resume from disk failed. [ 3.152347] EXT4-fs (sda1): barriers enabled [ 3.167516] kjournald2 starting: pid 399, dev sda1:8, commit interval 5 seconds [ 3.167529] EXT4-fs (sda1): delayed allocation enabled [ 3.167532] EXT4-fs: file extents enabled [ 3.168989] EXT4-fs: mballoc enabled [ 3.169009] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.750954] type=1505 audit(1262022255.377:2): operation="profile_load" pid=422 name=/usr/share/gdm/guest-session/Xsession [ 3.753301] type=1505 audit(1262022255.379:3): operation="profile_load" pid=423 name=/sbin/dhclient3 [ 3.753572] type=1505 audit(1262022255.379:4): operation="profile_load" pid=423 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.753726] type=1505 audit(1262022255.379:5): operation="profile_load" pid=423 name=/usr/lib/connman/scripts/dhclient-script [ 3.811345] type=1505 audit(1262022255.435:6): operation="profile_load" pid=424 name=/usr/bin/evince [ 3.816324] type=1505 audit(1262022255.443:7): operation="profile_load" pid=424 name=/usr/bin/evince-previewer [ 3.819150] type=1505 audit(1262022255.443:8): operation="profile_load" pid=424 name=/usr/bin/evince-thumbnailer [ 3.836099] type=1505 audit(1262022255.463:9): operation="profile_load" pid=426 name=/usr/lib/cups/backend/cups-pdf [ 3.836433] type=1505 audit(1262022255.463:10): operation="profile_load" pid=426 name=/usr/sbin/cupsd [ 4.704440] Adding 995988k swap on /dev/sda5. Priority:-1 extents:1 across:995988k [ 5.085375] EXT4-fs (sda1): internal journal on sda1:8 [ 5.506620] EXT4-fs (sda6): barriers enabled [ 5.506833] kjournald2 starting: pid 479, dev sda6:8, commit interval 5 seconds [ 5.507073] EXT4-fs (sda6): internal journal on sda6:8 [ 5.507077] EXT4-fs (sda6): delayed allocation enabled [ 5.507079] EXT4-fs: file extents enabled [ 5.507413] EXT4-fs: mballoc enabled [ 5.507431] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 5.651979] udev: starting version 147 [ 7.204323] lp: driver loaded but no devices found [ 7.216906] parport_pc 00:0a: reported by Plug and Play ACPI [ 7.216971] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 7.312168] lp0: using parport0 (interrupt-driven). [ 7.451747] ppdev: user-space parallel port driver [ 7.791403] Linux video capture interface: v2.00 [ 7.823912] uvcvideo: Found UVC 1.00 device ViewSonic 1.3M, USB2.0 Webcam (04f2:b021) [ 7.827472] input: ViewSonic 1.3M, USB2.0 Webcam as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2:1.0/input/input4 [ 7.827523] usbcore: registered new interface driver uvcvideo [ 7.827527] USB Video Class driver (v0.1.0) [ 7.840097] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 7.840117] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80 [ 7.858703] input: Wacom Bamboo as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/input/input5 [ 7.893091] usbcore: registered new interface driver wacom [ 7.893096] wacom: v1.51:USB Wacom Graphire and Wacom Intuos tablet driver [ 8.181806] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.582408] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23 [ 9.582416] Intel ICH 0000:00:10.2: PCI INT C -> Link[APCJ] -> GSI 23 (level, low) -> IRQ 23 [ 9.582455] Intel ICH 0000:00:10.2: setting latency timer to 64 [ 9.904045] intel8x0_measure_ac97_clock: measured 54235 usecs (2664 samples) [ 9.904050] intel8x0: clocking to 46906 [ 10.326789] __ratelimit: 6 callbacks suppressed [ 10.326793] type=1505 audit(1262022261.951:13): operation="profile_replace" pid=957 name=/usr/share/gdm/guest-session/Xsession [ 10.328921] type=1505 audit(1262022261.955:14): operation="profile_replace" pid=958 name=/sbin/dhclient3 [ 10.329194] type=1505 audit(1262022261.955:15): operation="profile_replace" pid=958 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 10.329345] type=1505 audit(1262022261.955:16): operation="profile_replace" pid=958 name=/usr/lib/connman/scripts/dhclient-script [ 10.341677] type=1505 audit(1262022261.967:17): operation="profile_replace" pid=959 name=/usr/bin/evince [ 10.346783] type=1505 audit(1262022261.971:18): operation="profile_replace" pid=959 name=/usr/bin/evince-previewer [ 10.350517] type=1505 audit(1262022261.975:19): operation="profile_replace" pid=959 name=/usr/bin/evince-thumbnailer [ 10.356571] type=1505 audit(1262022261.983:20): operation="profile_replace" pid=961 name=/usr/lib/cups/backend/cups-pdf [ 10.356909] type=1505 audit(1262022261.983:21): operation="profile_replace" pid=961 name=/usr/sbin/cupsd [ 10.358916] type=1505 audit(1262022261.983:22): operation="profile_replace" pid=962 name=/usr/sbin/mysqld-akonadi [ 21.624026] eth0: no IPv6 routers present [ 89.220028] Clocksource tsc unstable (delta = -133069312 ns) [ 143.944035] usb 1-5: new high speed USB device using ehci_hcd and address 5 [ 144.271771] usb 1-5: configuration #1 chosen from 1 choice [ 144.304762] Initializing USB Mass Storage driver... [ 144.304946] scsi4 : SCSI emulation for USB Mass Storage devices [ 144.305225] usbcore: registered new interface driver usb-storage [ 144.305232] USB Mass Storage support registered. [ 144.306568] usb-storage: device found at 5 [ 144.306572] usb-storage: waiting for device to settle before scanning [ 149.304337] usb-storage: device scan complete [ 149.313831] scsi 4:0:0:0: Direct-Access JetFlash TS1GJFV30 8.07 PQ: 0 ANSI: 2 [ 149.314684] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 149.347182] sd 4:0:0:0: [sdc] 2007038 512-byte logical blocks: (1.02 GB/979 MiB) [ 149.348419] sd 4:0:0:0: [sdc] Write Protect is off [ 149.348426] sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 149.348431] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 149.352696] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 149.352707] sdc: sdc1 [ 149.365213] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 149.365226] sd 4:0:0:0: [sdc] Attached SCSI removable disk