[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-15-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 (Ubuntu 2.6.31-15.50-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data) [ 0.000000] BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] modified: 000000001fff0000 - 000000001fffec00 (ACPI data) [ 0.000000] modified: 000000001fffec00 - 0000000020000000 (ACPI NVS) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1fff0000 @ 7000-c000 [ 0.000000] RAMDISK: 178e7000 - 1803336c [ 0.000000] ACPI: RSDP 000f7160 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 1fff4d07 0002C (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 1fffeb65 00074 (v01 IBM TP-T21 06040000 00000000) [ 0.000000] ACPI: DSDT 1fff4d33 09E32 (v01 IBM TP-T21 06040000 MSFT 0100000C) [ 0.000000] ACPI: FACS 1ffff000 00040 [ 0.000000] ACPI: BOOT 1fffebd9 00027 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 0 - 1fff0000 [ 0.000000] node 0 low ram: 00000000 - 1fff0000 [ 0.000000] node 0 bootmap 00008000 - 0000c000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [00178e7000 - 001803336c] RAMDISK ==> [00178e7000 - 001803336c] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008a9000 - 00008ac0d9] BRK ==> [00008a9000 - 00008ac0d9] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fff0 [ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001fff0 [ 0.000000] On node 0 totalpages: 130955 [ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dff80000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1402000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129931 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-15-generic root=UUID=a9cad87e-807c-4c09-b209-02697b15a2b7 ro splash quiet splash [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2621120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 501140k/524224k available (4566k kernel code, 22484k reserved, 2142k data, 540k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575b44 - 0xc078d3c8 (2142 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575b44 (4566 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 746.771 MHz processor. [ 0.001437] Console: colour VGA+ 80x25 [ 0.001449] console [tty0] enabled [ 0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 1493.54 BogoMIPS (lpj=2987084) [ 0.004079] Security Framework initialized [ 0.004151] AppArmor: AppArmor initialized [ 0.004178] Mount-cache hash table entries: 512 [ 0.004555] Initializing cgroup subsys ns [ 0.004568] Initializing cgroup subsys cpuacct [ 0.004582] Initializing cgroup subsys memory [ 0.004608] Initializing cgroup subsys freezer [ 0.004616] Initializing cgroup subsys net_cls [ 0.004659] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.004669] CPU: L2 cache: 256K [ 0.004683] mce: CPU supports 5 MCE banks [ 0.004725] Performance Counters: [ 0.004733] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.004741] no hardware sampling interrupt available. [ 0.004748] p6 PMU driver. [ 0.004786] ... version: 0 [ 0.004793] ... bit width: 32 [ 0.004800] ... generic counters: 2 [ 0.004807] ... value mask: 00000000ffffffff [ 0.004814] ... max period: 000000007fffffff [ 0.004822] ... fixed-purpose counters: 0 [ 0.004828] ... counter mask: 0000000000000003 [ 0.004841] Checking 'hlt' instruction... OK. [ 0.021449] SMP alternatives: switching to UP code [ 0.032064] Freeing SMP alternatives: 19k freed [ 0.032129] ACPI: Core revision 20090521 [ 0.057926] ACPI: setting ELCR to 0200 (from 0800) [ 0.060237] weird, boot CPU (#0) not listed by the BIOS. [ 0.060246] SMP motherboard not detected. [ 0.060255] Local APIC not detected. Using dummy APIC emulation. [ 0.060261] SMP disabled [ 0.060883] Brought up 1 CPUs [ 0.060901] Total of 1 processors activated (1493.54 BogoMIPS). [ 0.060952] CPU0 attaching NULL sched-domain. [ 0.061919] Booting paravirtualized kernel on bare hardware [ 0.062745] regulator: core version 0.5 [ 0.062788] Time: 9:13:44 Date: 11/22/09 [ 0.064215] NET: Registered protocol family 16 [ 0.064644] EISA bus registered [ 0.064695] ACPI: bus type pci registered [ 0.065402] PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 [ 0.065411] PCI: Using configuration type 1 for base access [ 0.068874] bio: create slab at 0 [ 0.071598] ACPI: EC: Look up EC in DSDT [ 0.463911] ACPI: Interpreter enabled [ 0.463929] ACPI: (supports S0 S1 S3 S4 S5) [ 0.464025] ACPI: Using PIC for interrupt routing [ 0.467443] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.698564] ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62 [ 0.698574] ACPI: EC: driver started in interrupt mode [ 0.698779] ACPI: Power Resource [PSER] (off) [ 0.698898] ACPI: Power Resource [PSIO] (on) [ 0.912436] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.912526] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.912652] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff] [ 0.912789] pci 0000:00:02.0: reg 10 32bit mmio: [0x50000000-0x50000fff] [ 0.912822] pci 0000:00:02.0: supports D1 D2 [ 0.912831] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.912843] pci 0000:00:02.0: PME# disabled [ 0.912900] pci 0000:00:02.1: reg 10 32bit mmio: [0x50100000-0x50100fff] [ 0.912932] pci 0000:00:02.1: supports D1 D2 [ 0.912940] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.912951] pci 0000:00:02.1: PME# disabled [ 0.913016] pci 0000:00:03.0: reg 10 32bit mmio: [0xe8101000-0xe81010ff] [ 0.913033] pci 0000:00:03.0: reg 14 io port: [0x1c00-0x1c07] [ 0.913048] pci 0000:00:03.0: reg 18 io port: [0x1800-0x18ff] [ 0.913101] pci 0000:00:03.0: supports D2 [ 0.913109] pci 0000:00:03.0: PME# supported from D2 D3hot D3cold [ 0.913119] pci 0000:00:03.0: PME# disabled [ 0.913175] pci 0000:00:05.0: reg 10 32bit mmio: [0xe8100000-0xe8100fff] [ 0.913191] pci 0000:00:05.0: reg 14 32bit mmio: [0xe8000000-0xe80fffff] [ 0.913246] pci 0000:00:05.0: supports D1 D2 [ 0.913397] pci 0000:00:07.1: reg 20 io port: [0x1c10-0x1c1f] [ 0.913487] pci 0000:00:07.2: reg 20 io port: [0x1c20-0x1c3f] [ 0.913594] pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI [ 0.913606] pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB [ 0.913621] pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef [ 0.913632] pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7 [ 0.913642] pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f [ 0.913757] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.913794] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.913824] pci 0000:01:00.0: supports D1 D2 [ 0.913882] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.913944] pci_bus 0000:00: on NUMA node 0 [ 0.913962] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.914136] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.924417] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.924941] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.925477] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.925996] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.926678] SCSI subsystem initialized [ 0.926912] libata version 3.00 loaded. [ 0.927165] usbcore: registered new interface driver usbfs [ 0.927224] usbcore: registered new interface driver hub [ 0.927317] usbcore: registered new device driver usb [ 0.927790] ACPI: WMI: Mapper loaded [ 0.927798] PCI: Using ACPI for IRQ routing [ 0.928363] Bluetooth: Core ver 2.15 [ 0.928493] NET: Registered protocol family 31 [ 0.928501] Bluetooth: HCI device and connection manager initialized [ 0.928511] Bluetooth: HCI socket layer initialized [ 0.928518] NetLabel: Initializing [ 0.928523] NetLabel: domain hash size = 128 [ 0.928529] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.928574] NetLabel: unlabeled traffic allowed by default [ 0.935743] pnp: PnP ACPI init [ 0.935818] ACPI: bus type pnp registered [ 1.051661] pnp: PnP ACPI: found 15 devices [ 1.051671] ACPI: ACPI bus type pnp unregistered [ 1.051683] PnPBIOS: Disabled by ACPI PNP [ 1.051724] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 1.051737] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 1.051748] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 1.051759] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 1.051771] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 1.051782] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 1.051793] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 1.051805] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 1.051816] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 1.051827] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved [ 1.051839] system 00:00: iomem range 0xfff80000-0xffffffff has been reserved [ 1.051864] system 00:02: ioport range 0x1000-0x103f has been reserved [ 1.051875] system 00:02: ioport range 0x1040-0x104f has been reserved [ 1.051886] system 00:02: ioport range 0xfe00-0xfe0f has been reserved [ 1.051913] system 00:09: ioport range 0x15e0-0x15ef has been reserved [ 1.086999] AppArmor: AppArmor Filesystem Enabled [ 1.087086] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.087095] pci 0000:00:01.0: IO window: disabled [ 1.087108] pci 0000:00:01.0: MEM window: 0xf0000000-0xf7ffffff [ 1.087120] pci 0000:00:01.0: PREFETCH window: 0x30000000-0x300fffff [ 1.087133] pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02 [ 1.087142] pci 0000:00:02.0: IO window: 0x001400-0x0014ff [ 1.087153] pci 0000:00:02.0: IO window: 0x002000-0x0020ff [ 1.087165] pci 0000:00:02.0: PREFETCH window: 0x20000000-0x23ffffff [ 1.087177] pci 0000:00:02.0: MEM window: 0x24000000-0x27ffffff [ 1.087188] pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06 [ 1.087197] pci 0000:00:02.1: IO window: 0x002400-0x0024ff [ 1.087207] pci 0000:00:02.1: IO window: 0x002800-0x0028ff [ 1.087218] pci 0000:00:02.1: PREFETCH window: 0x28000000-0x2bffffff [ 1.087229] pci 0000:00:02.1: MEM window: 0x2c000000-0x2fffffff [ 1.087416] pci 0000:00:02.0: power state changed by ACPI to D0 [ 1.088325] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 1.088336] PCI: setting IRQ 11 as level-triggered [ 1.088349] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.088453] pci 0000:00:02.1: power state changed by ACPI to D0 [ 1.089289] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 1.089302] pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 1.089321] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.089331] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 1.089341] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf7ffffff] [ 1.089351] pci_bus 0000:01: resource 2 pref mem [0x30000000-0x300fffff] [ 1.089361] pci_bus 0000:02: resource 0 io: [0x1400-0x14ff] [ 1.089370] pci_bus 0000:02: resource 1 io: [0x2000-0x20ff] [ 1.089379] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff] [ 1.089389] pci_bus 0000:02: resource 3 mem: [0x24000000-0x27ffffff] [ 1.089399] pci_bus 0000:06: resource 0 io: [0x2400-0x24ff] [ 1.089407] pci_bus 0000:06: resource 1 io: [0x2800-0x28ff] [ 1.089417] pci_bus 0000:06: resource 2 pref mem [0x28000000-0x2bffffff] [ 1.089426] pci_bus 0000:06: resource 3 mem: [0x2c000000-0x2fffffff] [ 1.089562] NET: Registered protocol family 2 [ 1.089899] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 1.090905] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 1.091280] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 1.091724] TCP: Hash tables configured (established 16384 bind 16384) [ 1.091734] TCP reno registered [ 1.092222] NET: Registered protocol family 1 [ 1.092452] Trying to unpack rootfs image as initramfs... [ 1.588088] Switched to high resolution mode on CPU 0 [ 1.767123] Freeing initrd memory: 7472k freed [ 1.808489] Simple Boot Flag at 0x35 set to 0x1 [ 1.808783] cpufreq-nforce2: No nForce2 chipset. [ 1.808871] Scanning for low memory corruption every 60 seconds [ 1.809231] audit: initializing netlink socket (disabled) [ 1.809281] type=2000 audit(1258881225.808:1): initialized [ 1.837866] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.843652] VFS: Disk quotas dquot_6.5.2 [ 1.843875] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.846090] fuse init (API version 7.12) [ 1.846437] msgmni has been set to 993 [ 1.847216] alg: No test for stdrng (krng) [ 1.847269] io scheduler noop registered [ 1.847278] io scheduler anticipatory registered [ 1.847285] io scheduler deadline registered [ 1.847485] io scheduler cfq registered (default) [ 1.847522] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.847598] pci 0000:01:00.0: Boot video device [ 1.847830] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.847909] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.848922] ACPI: AC Adapter [AC] (on-line) [ 1.849119] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.849132] ACPI: Power Button [PWRF] [ 1.849299] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.849738] ACPI: Lid Switch [LID] [ 1.849891] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.849904] ACPI: Sleep Button [SLPB] [ 1.850357] Marking TSC unstable due to TSC halts in idle [ 1.850405] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.850486] processor LNXCPU:00: registered as cooling_device0 [ 1.850500] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.965497] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.965525] ACPI: Thermal Zone [THM0] (33 C) [ 1.965695] isapnp: Scanning for PnP cards... [ 2.319769] isapnp: No Plug & Play device found [ 2.323879] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.326635] serial 00:0c: activated [ 2.326851] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.330318] brd: module loaded [ 2.331923] loop: module loaded [ 2.332406] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 2.332798] ata_piix 0000:00:07.1: version 2.13 [ 2.333230] scsi0 : ata_piix [ 2.333770] scsi1 : ata_piix [ 2.387183] ACPI: Battery Slot [BAT0] (battery present) [ 2.550478] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c10 irq 14 [ 2.550489] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1c18 irq 15 [ 2.553272] Fixed MDIO Bus: probed [ 2.553415] PPP generic driver version 2.4.2 [ 2.553781] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.553850] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.553900] uhci_hcd: USB Universal Host Controller Interface driver [ 2.555049] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 2.555064] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 2.555091] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 2.555285] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 2.555340] uhci_hcd 0000:00:07.2: irq 11, io base 0x00001c20 [ 2.555657] usb usb1: configuration #1 chosen from 1 choice [ 2.555756] hub 1-0:1.0: USB hub found [ 2.555788] hub 1-0:1.0: 2 ports detected [ 2.556666] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.572373] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.572393] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.572597] mice: PS/2 mouse device common for all mice [ 2.572956] rtc_cmos 00:06: RTC can wake from S4 [ 2.573083] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 2.573117] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 2.573479] device-mapper: uevent: version 1.0.3 [ 2.573814] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.574104] device-mapper: multipath: version 1.1.0 loaded [ 2.574114] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.574621] EISA: Probing bus 0 at eisa.0 [ 2.574637] Cannot allocate resource for EISA slot 1 [ 2.574647] Cannot allocate resource for EISA slot 2 [ 2.574676] EISA: Detected 0 cards. [ 2.574989] cpuidle: using governor ladder [ 2.575174] cpuidle: using governor menu [ 2.577149] TCP cubic registered [ 2.577721] NET: Registered protocol family 10 [ 2.579272] lo: Disabled Privacy Extensions [ 2.580522] NET: Registered protocol family 17 [ 2.580598] Bluetooth: L2CAP ver 2.13 [ 2.580605] Bluetooth: L2CAP socket layer initialized [ 2.580615] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.580621] Bluetooth: SCO socket layer initialized [ 2.580761] Bluetooth: RFCOMM TTY layer initialized [ 2.580772] Bluetooth: RFCOMM socket layer initialized [ 2.580779] Bluetooth: RFCOMM ver 1.11 [ 2.580873] Using IPI No-Shortcut mode [ 2.581135] PM: Resume from disk failed. [ 2.581173] registered taskstats version 1 [ 2.581459] Magic number: 1:804:222 [ 2.581635] rtc_cmos 00:06: setting system clock to 2009-11-22 09:13:46 UTC (1258881226) [ 2.581646] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.581653] EDD information not available. [ 2.585780] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.720736] ata2.00: ATAPI: MATSHITADVD-ROM SR-8174, C221, max UDMA/33 [ 2.721244] ata1.00: ATA-5: IC25N040ATCS05-0, CS4OA61A, max UDMA/100 [ 2.721255] ata1.00: 78140160 sectors, multi 16: LBA [ 2.736531] ata2.00: configured for UDMA/33 [ 2.736963] ata1.00: configured for UDMA/33 [ 2.737349] scsi 0:0:0:0: Direct-Access ATA IC25N040ATCS05-0 CS4O PQ: 0 ANSI: 5 [ 2.737767] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.737908] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 2.738094] sd 0:0:0:0: [sda] Write Protect is off [ 2.738104] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.738200] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.738673] sda: [ 2.740576] scsi 1:0:0:0: CD-ROM MATSHITA DVD-ROM SR-8174 C221 PQ: 0 ANSI: 5 [ 2.744626] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 2.744637] Uniform CD-ROM driver Revision: 3.20 [ 2.744939] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.745110] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.764580] sda1 sda2 < sda5 sda6 > [ 2.794526] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.794584] Freeing unused kernel memory: 540k freed [ 2.797204] Write protecting the kernel text: 4568k [ 2.797335] Write protecting the kernel read-only data: 1836k [ 2.868127] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 3.064451] usb 1-1: configuration #1 chosen from 1 choice [ 3.072298] hub 1-1:1.0: USB hub found [ 3.080099] hub 1-1:1.0: 4 ports detected [ 3.084133] Clocksource tsc unstable (delta = -131052900 ns) [ 3.405994] Linux agpgart interface v0.103 [ 3.449397] usb 1-1.1: new low speed USB device using uhci_hcd and address 3 [ 3.555193] agpgart-intel 0000:00:00.0: Intel 440BX Chipset [ 3.559949] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 3.716164] Floppy drive(s): fd0 is 1.44M [ 3.738412] FDC 0 is a National Semiconductor PC87306 [ 3.745685] usb 1-1.1: configuration #1 chosen from 1 choice [ 3.830411] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:08/device:09/input/input5 [ 3.830554] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 3.882618] usb 1-1.2: new full speed USB device using uhci_hcd and address 4 [ 3.966126] usbcore: registered new interface driver hiddev [ 3.982398] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.1/1-1.1:1.0/input/input6 [ 3.982675] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:07.2-1.1/input0 [ 4.000617] generic-usb 0003:046D:C51B.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:07.2-1.1/input1 [ 4.000683] usbcore: registered new interface driver usbhid [ 4.000696] usbhid: v2.6:USB HID core driver [ 4.045658] usb 1-1.2: configuration #1 chosen from 1 choice [ 4.141247] usb 1-1.3: new full speed USB device using uhci_hcd and address 5 [ 4.308364] usb 1-1.3: configuration #1 chosen from 1 choice [ 4.368323] Initializing USB Mass Storage driver... [ 4.369427] scsi2 : SCSI emulation for USB Mass Storage devices [ 4.369959] usbcore: registered new interface driver usb-storage [ 4.369973] USB Mass Storage support registered. [ 4.370450] usb-storage: device found at 5 [ 4.370458] usb-storage: waiting for device to settle before scanning [ 4.436081] usb 1-1.4: new full speed USB device using uhci_hcd and address 6 [ 4.640422] usb 1-1.4: configuration #1 chosen from 1 choice [ 4.645204] scsi3 : SCSI emulation for USB Mass Storage devices [ 4.645589] usb-storage: device found at 6 [ 4.645596] usb-storage: waiting for device to settle before scanning [ 5.325698] PM: Starting manual resume from disk [ 5.325717] PM: Resume from partition 8:6 [ 5.325724] PM: Checking hibernation image. [ 5.326148] PM: Resume from disk failed. [ 5.345691] EXT4-fs (sda1): barriers enabled [ 5.367087] kjournald2 starting: pid 337, dev sda1:8, commit interval 5 seconds [ 5.367149] EXT4-fs (sda1): delayed allocation enabled [ 5.367160] EXT4-fs: file extents enabled [ 5.373080] EXT4-fs: mballoc enabled [ 5.373139] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 6.333675] type=1505 audit(1258881230.250:2): operation="profile_load" pid=360 name=/usr/share/gdm/guest-session/Xsession [ 6.353996] type=1505 audit(1258881230.270:3): operation="profile_load" pid=361 name=/sbin/dhclient3 [ 6.355485] type=1505 audit(1258881230.270:4): operation="profile_load" pid=361 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 6.356394] type=1505 audit(1258881230.274:5): operation="profile_load" pid=361 name=/usr/lib/connman/scripts/dhclient-script [ 6.469693] type=1505 audit(1258881230.386:6): operation="profile_load" pid=362 name=/usr/bin/evince [ 6.498295] type=1505 audit(1258881230.414:7): operation="profile_load" pid=362 name=/usr/bin/evince-previewer [ 6.515501] type=1505 audit(1258881230.430:8): operation="profile_load" pid=362 name=/usr/bin/evince-thumbnailer [ 6.576754] type=1505 audit(1258881230.494:9): operation="profile_load" pid=364 name=/usr/lib/cups/backend/cups-pdf [ 6.578603] type=1505 audit(1258881230.494:10): operation="profile_load" pid=364 name=/usr/sbin/cupsd [ 6.609578] type=1505 audit(1258881230.526:11): operation="profile_load" pid=365 name=/usr/sbin/ntpd [ 9.369530] usb-storage: device scan complete [ 9.372461] scsi 2:0:0:0: Direct-Access BUFFALO HD-PEU2 1.03 PQ: 0 ANSI: 4 [ 9.373925] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 9.378395] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 9.383388] sd 2:0:0:0: [sdb] Write Protect is off [ 9.383401] sd 2:0:0:0: [sdb] Mode Sense: 21 00 00 00 [ 9.383411] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 9.393537] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 9.393554] sdb: sdb1 [ 9.472392] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 9.472408] sd 2:0:0:0: [sdb] Attached SCSI disk [ 9.645480] usb-storage: device scan complete [ 9.672423] scsi 3:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS [ 9.673937] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 11.365084] sd 3:0:0:0: [sdc] 7823360 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 11.368059] sd 3:0:0:0: [sdc] Write Protect is off [ 11.368070] sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 11.368079] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 11.383046] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 11.383060] sdc: sdc1 [ 11.416089] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 11.416101] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 21.222257] Adding 763048k swap on /dev/sda6. Priority:-1 extents:1 across:763048k [ 21.271201] udev: starting version 147 [ 21.672394] lp: driver loaded but no devices found [ 21.776099] EXT4-fs (sda1): internal journal on sda1:8 [ 21.777483] parport_pc 00:0d: reported by Plug and Play ACPI [ 21.777535] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 21.883011] lp0: using parport0 (interrupt-driven). [ 22.456998] irda_init() [ 22.457043] NET: Registered protocol family 23 [ 22.626537] nsc-ircc 00:0e: activated [ 22.626554] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 22.626608] nsc-ircc, chip->init [ 22.626616] nsc-ircc, Found chip at base=0x02e [ 22.626661] nsc-ircc, driver loaded (Dag Brattli) [ 22.675585] IrDA: Registered device irda0 [ 22.675602] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 22.702883] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.833452] yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:0130] [ 22.833483] yenta_cardbus 0000:00:02.0: Using INTVAL to route CSC interrupts to PCI [ 22.833493] yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI [ 22.833505] yenta_cardbus 0000:00:02.0: TI: mfunc 0x00001000, devctl 0x66 [ 23.088569] yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x0430, PCI irq 11 [ 23.088583] yenta_cardbus 0000:00:02.0: Socket status: 30000006 [ 23.089084] yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:0130] [ 23.089114] yenta_cardbus 0000:00:02.1: Using INTVAL to route CSC interrupts to PCI [ 23.089123] yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI [ 23.089135] yenta_cardbus 0000:00:02.1: TI: mfunc 0x00001000, devctl 0x66 [ 23.121383] Non-volatile memory driver v1.3 [ 23.256618] thinkpad_acpi: ThinkPad ACPI Extras v0.23 [ 23.256630] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 23.256637] thinkpad_acpi: ThinkPad BIOS KZET22WW (1.04a), EC unknown [ 23.277516] Registered led device: tpacpi::thinklight [ 23.277712] Registered led device: tpacpi::power [ 23.277787] Registered led device: tpacpi::standby [ 23.303189] input: ThinkPad Extra Buttons as /devices/virtual/input/input7 [ 23.328924] yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x0430, PCI irq 11 [ 23.328939] yenta_cardbus 0000:00:02.1: Socket status: 30000020 [ 23.444471] Linux video capture interface: v2.00 [ 23.545804] gspca: main v2.6.0 registered [ 23.551601] gspca: probing 046d:08dd [ 23.551624] zc3xx: Sensor MC501CB [ 23.556408] piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module! [ 23.556439] piix4_smbus: probe of 0000:00:07.3 failed with error -1 [ 23.613139] gspca: probe ok [ 23.613187] gspca: probing 046d:08dd [ 23.613222] gspca: probing 046d:08dd [ 23.613310] usbcore: registered new interface driver zc3xx [ 23.613322] zc3xx: registered [ 23.676439] ppdev: user-space parallel port driver [ 23.893646] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.968168] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1 [ 23.968275] pci 0000:06:00.0: reg 10 32bit mmio: [0x000000-0x001fff] [ 23.968420] pci 0000:06:00.0: supports D1 D2 [ 23.968429] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 23.968444] pci 0000:06:00.0: PME# disabled [ 24.301170] psmouse serio1: ID: 10 00 64 [ 24.982178] cfg80211: Calling CRDA to update world regulatory domain [ 25.093378] cfg80211: World regulatory domain updated: [ 25.093392] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.093405] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.093415] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 25.093425] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 25.093435] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.093444] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.188230] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 25.229529] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input8 [ 25.400849] __ratelimit: 3 callbacks suppressed [ 25.400861] type=1505 audit(1258881249.318:13): operation="profile_replace" pid=891 name=/usr/share/gdm/guest-session/Xsession [ 25.407227] type=1505 audit(1258881249.322:14): operation="profile_replace" pid=892 name=/sbin/dhclient3 [ 25.473771] type=1505 audit(1258881249.390:15): operation="profile_replace" pid=892 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 25.474617] type=1505 audit(1258881249.390:16): operation="profile_replace" pid=892 name=/usr/lib/connman/scripts/dhclient-script [ 25.484726] p54pci 0000:06:00.0: enabling device (0000 -> 0002) [ 25.484757] p54pci 0000:06:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 25.484782] p54pci 0000:06:00.0: setting latency timer to 64 [ 25.484882] p54pci 0000:06:00.0: firmware: requesting isl3886pci [ 25.573892] phy0: p54 detected a LM86 firmware [ 25.573905] p54: rx_mtu reduced from 3240 to 2376 [ 25.573914] phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 [ 25.573923] phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [ 25.748101] type=1505 audit(1258881249.666:17): operation="profile_replace" pid=898 name=/usr/bin/evince [ 25.773939] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 25.774790] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 25.775221] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 25.775598] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 25.776411] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 25.780436] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 25.781284] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 25.781720] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 25.782098] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 25.782842] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 25.938762] type=1505 audit(1258881249.854:18): operation="profile_replace" pid=898 name=/usr/bin/evince-previewer [ 25.960824] type=1505 audit(1258881249.878:19): operation="profile_replace" pid=898 name=/usr/bin/evince-thumbnailer [ 26.031346] type=1505 audit(1258881249.946:20): operation="profile_replace" pid=922 name=/usr/lib/cups/backend/cups-pdf [ 26.033559] type=1505 audit(1258881249.950:21): operation="profile_replace" pid=922 name=/usr/sbin/cupsd [ 26.051535] type=1505 audit(1258881249.966:22): operation="profile_replace" pid=923 name=/usr/sbin/ntpd [ 26.179302] Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 26.365305] usbcore: registered new interface driver snd-usb-audio [ 26.788939] gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz [ 26.797548] phy0: hwaddr 00:09:5b:c7:07:18, MAC:isl3890 RF:Frisbee [ 26.893180] phy0: Selected rate control algorithm 'minstrel' [ 26.895779] Registered led device: p54-phy0::assoc [ 26.895842] Registered led device: p54-phy0::tx [ 26.895903] Registered led device: p54-phy0::rx [ 26.895965] Registered led device: p54-phy0::radio [ 26.895983] p54pci 0000:06:00.0: is registered as 'phy0' [ 28.710078] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 29.824064] phy0: frequency change failed [ 29.938505] mtrr: base(0xf2000000) is not aligned on a size(0x5000000) boundary [ 31.495999] [drm] Initialized drm 1.1.0 20060810 [ 31.509907] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 31.510600] [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0 [ 35.196077] phy0: frequency change failed [ 55.136140] phy0: frequency change failed [ 85.144119] phy0: frequency change failed [ 114.180099] phy0: frequency change failed [ 114.184571] wlan0: authenticate with AP 00:15:fa:14:4d:40 [ 114.187783] wlan0: authenticated [ 114.187800] wlan0: associate with AP 00:15:fa:14:4d:40 [ 114.196094] wlan0: RX AssocResp from 00:15:fa:14:4d:40 (capab=0x421 status=0 aid=178) [ 114.196110] wlan0: associated [ 114.198468] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 115.809935] wlan0: disassociating by local choice (reason=3) [ 116.858977] phy0: frequency change failed [ 117.933219] phy0: frequency change failed [ 124.572074] wlan0: no IPv6 routers present [ 126.920634] phy0: frequency change failed [ 126.924848] wlan0: authenticate with AP 00:15:fa:14:48:f0 [ 126.927589] wlan0: authenticated [ 126.927606] wlan0: associate with AP 00:15:fa:14:48:f0 [ 126.930421] wlan0: RX AssocResp from 00:15:fa:14:48:f0 (capab=0x421 status=0 aid=179) [ 126.930436] wlan0: associated [ 185.129998] phy0: frequency change failed [ 185.134274] wlan0: authenticate with AP 00:15:fa:14:49:50 [ 185.185352] wlan0: authenticated [ 185.185369] wlan0: associate with AP 00:15:fa:14:49:50 [ 185.189962] wlan0: RX ReassocResp from 00:15:fa:14:49:50 (capab=0x421 status=0 aid=244) [ 185.189977] wlan0: associated [ 225.168113] phy0: frequency change failed [ 235.656118] wlan0: deauthenticated (Reason: 2) [ 236.660152] wlan0: direct probe to AP 00:15:fa:14:49:50 try 1 [ 236.864108] wlan0: direct probe to AP 00:15:fa:14:49:50 try 2 [ 236.872217] wlan0 direct probe responded [ 236.872236] wlan0: authenticate with AP 00:15:fa:14:49:50 [ 236.878012] wlan0: authenticated [ 236.878029] wlan0: associate with AP 00:15:fa:14:49:50 [ 236.892323] wlan0: RX ReassocResp from 00:15:fa:14:49:50 (capab=0x421 status=0 aid=245) [ 236.892338] wlan0: associated [ 237.967639] phy0: frequency change failed [ 243.657517] wlan0: deauthenticated (Reason: 2) [ 244.656082] wlan0: direct probe to AP 00:15:fa:14:49:50 try 1 [ 244.861824] wlan0: direct probe to AP 00:15:fa:14:49:50 try 2 [ 244.864511] wlan0 direct probe responded [ 244.864529] wlan0: authenticate with AP 00:15:fa:14:49:50 [ 244.867491] wlan0: authenticated [ 244.867506] wlan0: associate with AP 00:15:fa:14:49:50 [ 244.878153] wlan0: RX ReassocResp from 00:15:fa:14:49:50 (capab=0x421 status=0 aid=246) [ 244.878168] wlan0: associated [ 245.968080] phy0: frequency change failed [ 247.044067] phy0: frequency change failed [ 247.044154] wlan0: authenticate with AP 00:15:fa:14:4d:40 [ 247.046911] wlan0: authenticated [ 247.046922] wlan0: associate with AP 00:15:fa:14:4d:40 [ 247.049041] wlan0: RX ReassocResp from 00:15:fa:14:4d:40 (capab=0x421 status=0 aid=179) [ 247.049052] wlan0: associated [ 285.200139] phy0: frequency change failed [ 286.297005] phy0: frequency change failed [ 286.297096] wlan0: authenticate with AP 00:19:aa:f5:6e:20 [ 286.304101] wlan0: authenticated [ 286.304118] wlan0: associate with AP 00:19:aa:f5:6e:20 [ 286.308878] wlan0: RX ReassocResp from 00:19:aa:f5:6e:20 (capab=0x421 status=0 aid=9) [ 286.308892] wlan0: associated [ 365.144107] phy0: frequency change failed [ 366.216117] phy0: frequency change failed [ 366.216207] wlan0: authenticate with AP 00:15:fa:14:48:f0 [ 366.219519] wlan0: authenticated [ 366.219530] wlan0: associate with AP 00:15:fa:14:48:f0 [ 366.224810] wlan0: RX ReassocResp from 00:15:fa:14:48:f0 (capab=0x421 status=0 aid=180) [ 366.224823] wlan0: associated [ 465.136087] phy0: frequency change failed [ 465.139496] wlan0: authenticate with AP 00:19:aa:f5:70:50 [ 465.150154] wlan0: authenticated [ 465.150172] wlan0: associate with AP 00:19:aa:f5:70:50 [ 465.165503] wlan0: RX ReassocResp from 00:19:aa:f5:70:50 (capab=0x421 status=0 aid=156) [ 465.165518] wlan0: associated [ 585.172163] phy0: frequency change failed [ 585.179572] wlan0: authenticate with AP 00:19:aa:f5:6e:20 [ 585.229863] wlan0: authenticated [ 585.229881] wlan0: associate with AP 00:19:aa:f5:6e:20 [ 585.237411] wlan0: RX ReassocResp from 00:19:aa:f5:6e:20 (capab=0x421 status=0 aid=10) [ 585.237426] wlan0: associated [ 705.160129] phy0: frequency change failed [ 758.428150] wlan0: no probe response from AP 00:19:aa:f5:6e:20 - disassociating [ 759.620096] phy0: frequency change failed [ 759.630535] wlan0: authenticate with AP 00:15:fa:14:4d:40 [ 759.641566] wlan0: authenticated [ 759.641583] wlan0: associate with AP 00:15:fa:14:4d:40 [ 759.653211] wlan0: RX ReassocResp from 00:15:fa:14:4d:40 (capab=0x421 status=0 aid=180) [ 759.653228] wlan0: associated [ 825.151940] phy0: frequency change failed [ 945.155902] phy0: frequency change failed [ 1065.160146] phy0: frequency change failed [ 1185.132189] phy0: frequency change failed [ 1186.208070] phy0: frequency change failed [ 1186.208158] wlan0: authenticate with AP 00:15:fa:14:48:f0 [ 1186.213233] wlan0: authenticated [ 1186.213253] wlan0: associate with AP 00:15:fa:14:48:f0 [ 1186.220821] wlan0: RX ReassocResp from 00:15:fa:14:48:f0 (capab=0x421 status=0 aid=181) [ 1186.220837] wlan0: associated [ 1305.156207] phy0: frequency change failed [ 1425.154106] phy0: frequency change failed [ 1545.160137] phy0: frequency change failed [ 1546.228245] phy0: frequency change failed [ 1546.228334] wlan0: authenticate with AP 00:19:aa:f5:70:50 [ 1546.232729] wlan0: authenticated [ 1546.232747] wlan0: associate with AP 00:19:aa:f5:70:50 [ 1546.236730] wlan0: RX ReassocResp from 00:19:aa:f5:70:50 (capab=0x421 status=0 aid=160) [ 1546.236745] wlan0: associated [ 1665.164429] phy0: frequency change failed [ 1666.227331] phy0: frequency change failed [ 1666.227422] wlan0: authenticate with AP 00:15:fa:14:4d:40 [ 1666.230134] wlan0: authenticated [ 1666.230152] wlan0: associate with AP 00:15:fa:14:4d:40 [ 1666.232308] wlan0: RX ReassocResp from 00:15:fa:14:4d:40 (capab=0x421 status=0 aid=181) [ 1666.232322] wlan0: associated [ 1785.132090] phy0: frequency change failed [ 1785.143844] wlan0: authenticate with AP 00:19:e8:1f:f6:20 [ 1785.148821] wlan0: authenticated [ 1785.148838] wlan0: associate with AP 00:19:e8:1f:f6:20 [ 1785.156752] wlan0: RX ReassocResp from 00:19:e8:1f:f6:20 (capab=0x421 status=0 aid=150) [ 1785.156767] wlan0: associated [ 1821.739317] wlan0: deauthenticated (Reason: 2) [ 1822.742663] wlan0: direct probe to AP 00:19:e8:1f:f6:20 try 1 [ 1822.747337] wlan0 direct probe responded [ 1822.747353] wlan0: authenticate with AP 00:19:e8:1f:f6:20 [ 1822.760085] wlan0: authenticated [ 1822.760105] wlan0: associate with AP 00:19:e8:1f:f6:20 [ 1822.767505] wlan0: RX ReassocResp from 00:19:e8:1f:f6:20 (capab=0x421 status=0 aid=151) [ 1822.767522] wlan0: associated [ 1824.080155] phy0: frequency change failed [ 1825.166348] phy0: frequency change failed [ 1825.166432] wlan0: authenticate with AP 00:19:aa:f5:6e:20 [ 1825.169481] wlan0: authenticated [ 1825.169498] wlan0: associate with AP 00:19:aa:f5:6e:20 [ 1825.174661] wlan0: RX ReassocResp from 00:19:aa:f5:6e:20 (capab=0x421 status=0 aid=12) [ 1825.174674] wlan0: associated [ 1905.152101] phy0: frequency change failed [ 1905.159723] wlan0: authenticate with AP 00:19:aa:f5:70:50 [ 1905.163602] wlan0: authenticated [ 1905.163619] wlan0: associate with AP 00:19:aa:f5:70:50 [ 1905.167555] wlan0: RX ReassocResp from 00:19:aa:f5:70:50 (capab=0x421 status=0 aid=161) [ 1905.167620] wlan0: associated [ 2025.140106] phy0: frequency change failed [ 2026.200090] phy0: frequency change failed [ 2026.200174] wlan0: authenticate with AP 00:15:fa:14:49:50 [ 2026.204604] wlan0: authenticated [ 2026.204616] wlan0: associate with AP 00:15:fa:14:49:50 [ 2026.209162] wlan0: RX ReassocResp from 00:15:fa:14:49:50 (capab=0x421 status=0 aid=247) [ 2026.209175] wlan0: associated [ 2129.128176] wlan0: deauthenticated (Reason: 2) [ 2130.128170] wlan0: direct probe to AP 00:15:fa:14:49:50 try 1 [ 2130.328106] wlan0: direct probe to AP 00:15:fa:14:49:50 try 2 [ 2130.528106] wlan0: direct probe to AP 00:15:fa:14:49:50 try 3 [ 2130.530677] wlan0 direct probe responded [ 2130.530691] wlan0: authenticate with AP 00:15:fa:14:49:50 [ 2130.534192] wlan0: authenticated [ 2130.534204] wlan0: associate with AP 00:15:fa:14:49:50 [ 2130.539314] wlan0: RX ReassocResp from 00:15:fa:14:49:50 (capab=0x421 status=0 aid=248) [ 2130.539325] wlan0: associated [ 2132.048098] phy0: frequency change failed [ 2145.155960] phy0: frequency change failed [ 2265.160089] phy0: frequency change failed [ 2265.164859] wlan0: authenticate with AP 00:15:fa:14:48:f0 [ 2265.168590] wlan0: authenticated [ 2265.168606] wlan0: associate with AP 00:15:fa:14:48:f0 [ 2265.171729] wlan0: RX ReassocResp from 00:15:fa:14:48:f0 (capab=0x421 status=0 aid=182) [ 2265.171744] wlan0: associated [ 2385.168089] phy0: frequency change failed [ 2385.174287] wlan0: authenticate with AP 00:19:aa:f5:6e:20 [ 2385.177971] wlan0: authenticated [ 2385.177988] wlan0: associate with AP 00:19:aa:f5:6e:20 [ 2385.184245] wlan0: RX ReassocResp from 00:19:aa:f5:6e:20 (capab=0x421 status=0 aid=13) [ 2385.184260] wlan0: associated [ 2505.144148] phy0: frequency change failed [ 2505.149333] wlan0: authenticate with AP 00:19:aa:f5:70:50 [ 2505.153102] wlan0: authenticated [ 2505.153119] wlan0: associate with AP 00:19:aa:f5:70:50 [ 2505.155477] wlan0: RX ReassocResp from 00:19:aa:f5:70:50 (capab=0x421 status=0 aid=163) [ 2505.155491] wlan0: associated [ 2625.176115] phy0: frequency change failed [ 2625.179758] wlan0: authenticate with AP 00:15:fa:14:4d:40 [ 2625.186622] wlan0: authenticated [ 2625.186639] wlan0: associate with AP 00:15:fa:14:4d:40 [ 2625.188910] wlan0: RX ReassocResp from 00:15:fa:14:4d:40 (capab=0x421 status=0 aid=182) [ 2625.188926] wlan0: associated [ 2745.186481] phy0: frequency change failed [ 2865.188155] phy0: frequency change failed [ 2898.111943] kjournald starting. Commit interval 5 seconds [ 2898.115210] EXT3 FS on sda5, internal journal [ 2898.115237] EXT3-fs: mounted filesystem with writeback data mode. [ 2985.164151] phy0: frequency change failed [ 2985.167517] wlan0: authenticate with AP 00:15:fa:14:49:50 [ 2985.180714] wlan0: authenticated [ 2985.180732] wlan0: associate with AP 00:15:fa:14:49:50 [ 2985.188121] wlan0: RX ReassocResp from 00:15:fa:14:49:50 (capab=0x421 status=0 aid=249) [ 2985.188136] wlan0: associated [ 3105.184108] phy0: frequency change failed [ 3225.188113] phy0: frequency change failed [ 3345.143095] phy0: frequency change failed [ 3465.152105] phy0: frequency change failed [ 3465.158181] wlan0: authenticate with AP 00:15:fa:14:48:f0 [ 3465.202902] wlan0: authenticated [ 3465.202920] wlan0: associate with AP 00:15:fa:14:48:f0 [ 3465.205596] wlan0: RX ReassocResp from 00:15:fa:14:48:f0 (capab=0x421 status=0 aid=183) [ 3465.205611] wlan0: associated [ 3585.160073] phy0: frequency change failed [ 3705.145589] phy0: frequency change failed [ 3705.167597] wlan0: authenticate with AP 00:19:aa:f5:70:50 [ 3705.175658] wlan0: authenticated [ 3705.175675] wlan0: associate with AP 00:19:aa:f5:70:50 [ 3705.184103] wlan0: RX ReassocResp from 00:19:aa:f5:70:50 (capab=0x421 status=0 aid=164) [ 3705.184118] wlan0: associated [ 3825.132069] phy0: frequency change failed [ 3825.144362] wlan0: authenticate with AP 00:15:fa:14:4d:40 [ 3825.161271] wlan0: authenticated [ 3825.161289] wlan0: associate with AP 00:15:fa:14:4d:40 [ 3825.165785] wlan0: RX ReassocResp from 00:15:fa:14:4d:40 (capab=0x421 status=0 aid=183) [ 3825.165801] wlan0: associated [ 3945.140070] phy0: frequency change failed [ 3945.152205] wlan0: authenticate with AP 00:15:fa:14:48:f0 [ 3945.160193] wlan0: authenticated [ 3945.160210] wlan0: associate with AP 00:15:fa:14:48:f0 [ 3945.163122] wlan0: RX ReassocResp from 00:15:fa:14:48:f0 (capab=0x421 status=0 aid=184) [ 3945.163135] wlan0: associated [ 4065.180129] phy0: frequency change failed [ 4065.183570] wlan0: authenticate with AP 00:19:aa:f5:6e:20 [ 4065.192727] wlan0: authenticated [ 4065.192744] wlan0: associate with AP 00:19:aa:f5:6e:20 [ 4065.207638] wlan0: RX ReassocResp from 00:19:aa:f5:6e:20 (capab=0x421 status=0 aid=14) [ 4065.207653] wlan0: associated [ 4185.036553] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 4185.172186] phy0: frequency change failed [ 4185.181211] wlan0: authenticate with AP 00:19:aa:f5:70:50 [ 4185.182919] wlan0: authenticated [ 4185.182933] wlan0: associate with AP 00:19:aa:f5:70:50 [ 4185.188096] wlan0: RX ReassocResp from 00:19:aa:f5:70:50 (capab=0x421 status=0 aid=165) [ 4185.188112] wlan0: associated [ 4304.994871] phy0: frequency change failed [ 4305.000169] wlan0: authenticate with AP 00:15:fa:14:49:50 [ 4305.050679] wlan0: authenticated [ 4305.050696] wlan0: associate with AP 00:15:fa:14:49:50 [ 4305.058422] wlan0: RX ReassocResp from 00:15:fa:14:49:50 (capab=0x421 status=0 aid=251) [ 4305.058437] wlan0: associated [ 4425.012076] phy0: frequency change failed